Up to [cvs.NetBSD.org] / src / sys / netinet6
Request diff between arbitrary revisions
Keyword substitution: kv
Default branch: MAIN
netinet6: Use _NET_STAT* API instead of direct array access. XXX Exception: ip6flow_addstats_rt _assigns_ one of the `statistics' to the current count of ip6 flows in use, and we don't have anything in the _NET_STAT* API for that. So for now I abuse the abstraction, until we sort out this one exceptional case properly. PR kern/58380
inet6: reduce silent packet discards
inet6: pass rcvif to ip6_forward to avoid extra psref_acquire
inet, inet6: count packets dropped by IPsec The counters count packets dropped due to security policy checks.
Remove in-kernel handling of Router Advertisements This is much better handled by a user-land tool. Proposed on tech-net here: https://mail-index.netbsd.org/tech-net/2020/04/22/msg007766.html Note that the ioctl SIOCGIFINFO_IN6 no longer sets flags. That now needs to be done using the pre-existing SIOCSIFINFO_FLAGS ioctl. Compat is fully provided where it makes sense, but trying to turn on RA handling will obviously throw an error as it no longer exists. Note that if you use IPv6 temporary addresses, this now needs to be turned on in dhcpcd.conf(5) rather than in sysctl.conf(5).
Mostly merge changes from HEAD upto 20200411
Fix ipsecif(4) IPV6_MINMTU does not work correctly.
Pull up following revision(s) (requested by knakahara in ticket #1385):
sys/net/if.c 1.461
sys/net/if.h 1.277
sys/net/if_gif.c 1.149
sys/net/if_gif.h 1.33
sys/net/if_ipsec.c 1.19,1.20,1.24
sys/net/if_ipsec.h 1.5
sys/net/if_l2tp.c 1.33,1.36-1.39
sys/net/if_l2tp.h 1.7,1.8
sys/net/route.c 1.220,1.221
sys/net/route.h 1.125
sys/netinet/in_gif.c 1.95
sys/netinet/in_l2tp.c 1.17
sys/netinet/ip_input.c 1.391,1.392
sys/netinet/wqinput.c 1.6
sys/netinet6/in6_gif.c 1.94
sys/netinet6/in6_l2tp.c 1.18
sys/netinet6/ip6_forward.c 1.97
sys/netinet6/ip6_input.c 1.210,1.211
sys/netipsec/ipsec_output.c 1.82,1.83 (patched)
sys/netipsec/ipsecif.c 1.12,1.13,1.15,1.17 (patched)
sys/netipsec/key.c 1.259,1.260
ipsecif(4) support input drop packet counter.
ipsecif(4) should not increment drop counter by errors not related to if_snd. Pointed out by ozaki-r@n.o, thanks.
Remove unnecessary addresses in PF_KEY message.
MOBIKE Extensions for PF_KEY draft-schilcher-mobike-pfkey-extension-01.txt says
====================
5. SPD Update
// snip
SADB_X_SPDADD:
// snip
sadb_x_ipsecrequest_reqid:
An ID for that SA can be passed to the kernel in the
sadb_x_ipsecrequest_reqid field.
If tunnel mode is specified, the sadb_x_ipsecrequest structure is
followed by two sockaddr structures that define the tunnel
endpoint addresses. In the case that transport mode is used, no
additional addresses are specified.
====================
see: <a rel="nofollow" href="https://tools.ietf.org/html/draft-schilcher-mobike-pfkey-extension-01">https://tools.ietf.org/html/draft-schilcher-mobike-pfkey-extension-01</a>
ipsecif(4) uses transport mode, so it should not add addresses.
ipsecif(4) supports multiple peers in the same NAPT.
E.g. ipsec0 connects between NetBSD_A and NetBSD_B, ipsec1 connects
NetBSD_A and NetBSD_C at the following figure.
+----------+
+----| NetBSD_B |
+----------+ +------+ | +----------+
| NetBSD_A |--- ... ---| NAPT |---+
+----------+ +------+ | +----------+
+----| NetBSD_C |
+----------+
Add ATF later.
l2tp(4): fix output bytes counter. Pointed by k-goda@IIJ, thanks.
remove a variable which is no longer used.
l2tp: initialize mowner variables for MBUFTRACE
Avoid having a rtcache directly in a percpu storage
percpu(9) has a certain memory storage for each CPU and provides it by the piece
to users. If the storages went short, percpu(9) enlarges them by allocating new
larger memory areas, replacing old ones with them and destroying the old ones.
A percpu storage referenced by a pointer gotten via percpu_getref can be
destroyed by the mechanism after a running thread sleeps even if percpu_putref
has not been called.
Using rtcache, i.e., packet processing, typically involves sleepable operations
such as rwlock so we must avoid dereferencing a rtcache that is directly stored
in a percpu storage during packet processing. Address this situation by having
just a pointer to a rtcache in a percpu storage instead.
Reviewed by knakahara@ and yamaguchi@
wqinput: avoid having struct wqinput_worklist directly in a percpu storage
percpu(9) has a certain memory storage for each CPU and provides it by the piece
to users. If the storages went short, percpu(9) enlarges them by allocating new
larger memory areas, replacing old ones with them and destroying the old ones.
A percpu storage referenced by a pointer gotten via percpu_getref can be
destroyed by the mechanism after a running thread sleeps even if percpu_putref
has not been called.
Input handlers of wqinput normally involves sleepable operations so we must
avoid dereferencing a percpu data (struct wqinput_worklist) after executing
an input handler. Address this situation by having just a pointer to the data
in a percpu storage instead.
Reviewed by knakahara@ and yamaguchi@
Add missing #include <sys/kmem.h>
Divide Tx context of l2tp(4) to improve performance.
It seems l2tp(4) call path is too long for instruction cache. So, dividing
l2tp(4) Tx context improves CPU use efficiency.
After this commit, l2tp(4) throughput gains 10% on my machine(Atom C3000).
Apply some missing changes lost on the previous commit
Avoid having a rtcache directly in a percpu storage for tunnel protocols.
percpu(9) has a certain memory storage for each CPU and provides it by the piece
to users. If the storages went short, percpu(9) enlarges them by allocating new
larger memory areas, replacing old ones with them and destroying the old ones.
A percpu storage referenced by a pointer gotten via percpu_getref can be
destroyed by the mechanism after a running thread sleeps even if percpu_putref
has not been called.
Using rtcache, i.e., packet processing, typically involves sleepable operations
such as rwlock so we must avoid dereferencing a rtcache that is directly stored
in a percpu storage during packet processing. Address this situation by having
just a pointer to a rtcache in a percpu storage instead.
Reviewed by ozaki-r@ and yamaguchi@
l2tp(4): avoid having struct ifqueue directly in a percpu storage.
percpu(9) has a certain memory storage for each CPU and provides it by the piece
to users. If the storages went short, percpu(9) enlarges them by allocating new
larger memory areas, replacing old ones with them and destroying the old ones.
A percpu storage referenced by a pointer gotten via percpu_getref can be
destroyed by the mechanism after a running thread sleeps even if percpu_putref
has not been called.
Tx processing of l2tp(4) uses normally involves sleepable operations so we
must avoid dereferencing a percpu data (struct ifqueue) after executing Tx
processing. Address this situation by having just a pointer to the data in
a percpu storage instead.
Reviewed by ozaki-r@ and yamaguchi@
Pull up following revision(s) (requested by ozaki-r in ticket #238): sys/netipsec/ipsec_output.c: revision 1.83 sys/net/route.h: revision 1.125 sys/netinet6/ip6_input.c: revision 1.210 sys/netinet6/ip6_input.c: revision 1.211 sys/net/if.c: revision 1.461 sys/net/if_gif.h: revision 1.33 sys/net/route.c: revision 1.220 sys/net/route.c: revision 1.221 sys/net/if.h: revision 1.277 sys/netinet6/ip6_forward.c: revision 1.97 sys/netinet/wqinput.c: revision 1.6 sys/net/if_ipsec.h: revision 1.5 sys/netinet6/in6_l2tp.c: revision 1.18 sys/netinet6/in6_gif.c: revision 1.94 sys/net/if_l2tp.h: revision 1.7 sys/net/if_gif.c: revision 1.149 sys/net/if_l2tp.h: revision 1.8 sys/netinet/in_gif.c: revision 1.95 sys/netinet/in_l2tp.c: revision 1.17 sys/netipsec/ipsecif.c: revision 1.17 sys/net/if_ipsec.c: revision 1.24 sys/net/if_l2tp.c: revision 1.37 sys/netinet/ip_input.c: revision 1.391 sys/net/if_l2tp.c: revision 1.38 sys/netinet/ip_input.c: revision 1.392 sys/net/if_l2tp.c: revision 1.39 Avoid having a rtcache directly in a percpu storage percpu(9) has a certain memory storage for each CPU and provides it by the piece to users. If the storages went short, percpu(9) enlarges them by allocating new larger memory areas, replacing old ones with them and destroying the old ones. A percpu storage referenced by a pointer gotten via percpu_getref can be destroyed by the mechanism after a running thread sleeps even if percpu_putref has not been called. Using rtcache, i.e., packet processing, typically involves sleepable operations such as rwlock so we must avoid dereferencing a rtcache that is directly stored in a percpu storage during packet processing. Address this situation by having just a pointer to a rtcache in a percpu storage instead. Reviewed by knakahara@ and yamaguchi@ - wqinput: avoid having struct wqinput_worklist directly in a percpu storage percpu(9) has a certain memory storage for each CPU and provides it by the piece to users. If the storages went short, percpu(9) enlarges them by allocating new larger memory areas, replacing old ones with them and destroying the old ones. A percpu storage referenced by a pointer gotten via percpu_getref can be destroyed by the mechanism after a running thread sleeps even if percpu_putref has not been called. Input handlers of wqinput normally involves sleepable operations so we must avoid dereferencing a percpu data (struct wqinput_worklist) after executing an input handler. Address this situation by having just a pointer to the data in a percpu storage instead. Reviewed by knakahara@ and yamaguchi@ - Add missing #include <sys/kmem.h> - Divide Tx context of l2tp(4) to improve performance. It seems l2tp(4) call path is too long for instruction cache. So, dividing l2tp(4) Tx context improves CPU use efficiency. After this commit, l2tp(4) throughput gains 10% on my machine(Atom C3000). - Apply some missing changes lost on the previous commit - Avoid having a rtcache directly in a percpu storage for tunnel protocols. percpu(9) has a certain memory storage for each CPU and provides it by the piece to users. If the storages went short, percpu(9) enlarges them by allocating new larger memory areas, replacing old ones with them and destroying the old ones. A percpu storage referenced by a pointer gotten via percpu_getref can be destroyed by the mechanism after a running thread sleeps even if percpu_putref has not been called. Using rtcache, i.e., packet processing, typically involves sleepable operations such as rwlock so we must avoid dereferencing a rtcache that is directly stored in a percpu storage during packet processing. Address this situation by having just a pointer to a rtcache in a percpu storage instead. Reviewed by ozaki-r@ and yamaguchi@ - l2tp(4): avoid having struct ifqueue directly in a percpu storage. percpu(9) has a certain memory storage for each CPU and provides it by the piece to users. If the storages went short, percpu(9) enlarges them by allocating new larger memory areas, replacing old ones with them and destroying the old ones. A percpu storage referenced by a pointer gotten via percpu_getref can be destroyed by the mechanism after a running thread sleeps even if percpu_putref has not been called. Tx processing of l2tp(4) uses normally involves sleepable operations so we must avoid dereferencing a percpu data (struct ifqueue) after executing Tx processing. Address this situation by having just a pointer to the data in a percpu storage instead. Reviewed by ozaki-r@ and yamaguchi@
Avoid having a rtcache directly in a percpu storage percpu(9) has a certain memory storage for each CPU and provides it by the piece to users. If the storages went short, percpu(9) enlarges them by allocating new larger memory areas, replacing old ones with them and destroying the old ones. A percpu storage referenced by a pointer gotten via percpu_getref can be destroyed by the mechanism after a running thread sleeps even if percpu_putref has not been called. Using rtcache, i.e., packet processing, typically involves sleepable operations such as rwlock so we must avoid dereferencing a rtcache that is directly stored in a percpu storage during packet processing. Address this situation by having just a pointer to a rtcache in a percpu storage instead. Reviewed by knakahara@ and yamaguchi@
Sync with HEAD
Count packets dropped by pfil
Synch with HEAD
Remove now unused net_osdep.h includes, the other BSDs did the same.
Stop using m_copy(), use m_copym() directly. m_copy is useless, undocumented and confusing.
Sync with HEAD
Remove unused netipsec/xform.h includes.
Pull up following revision(s) (requested by maxv in ticket #1540): sys/netinet6/ip6_forward.c: revision 1.91 (via patch) Fix two pretty bad mistakes. If ipsec6_check_policy fails m is not freed, and a 'goto out' is missing after ipsec6_process_packet.
Pull up following revision(s) (requested by maxv in ticket #1540): sys/netinet6/ip6_forward.c: revision 1.91 (via patch) Fix two pretty bad mistakes. If ipsec6_check_policy fails m is not freed, and a 'goto out' is missing after ipsec6_process_packet.
Pull up following revision(s) (requested by maxv in ticket #1540): sys/netinet6/ip6_forward.c: revision 1.91 (via patch) Fix two pretty bad mistakes. If ipsec6_check_policy fails m is not freed, and a 'goto out' is missing after ipsec6_process_packet.
Pull up following revision(s) (requested by maxv in ticket #1590): sys/netinet6/ip6_forward.c: revision 1.91 (via patch) Fix two pretty bad mistakes. If ipsec6_check_policy fails m is not freed, and a 'goto out' is missing after ipsec6_process_packet.
Pull up following revision(s) (requested by maxv in ticket #1590): sys/netinet6/ip6_forward.c: revision 1.91 (via patch) Fix two pretty bad mistakes. If ipsec6_check_policy fails m is not freed, and a 'goto out' is missing after ipsec6_process_packet.
Pull up following revision(s) (requested by maxv in ticket #1590): sys/netinet6/ip6_forward.c: revision 1.91 (via patch) Fix two pretty bad mistakes. If ipsec6_check_policy fails m is not freed, and a 'goto out' is missing after ipsec6_process_packet.
Pull up following revision(s) (requested by maxv in ticket #671): sys/netinet6/ip6_forward.c: revision 1.91 Fix two pretty bad mistakes. If ipsec6_check_policy fails m is not freed, and a 'goto out' is missing after ipsec6_process_packet.
Pull up following revision(s) (requested by ozaki-r in ticket #1518): sys/netinet6/ip6_forward.c: 1.89-1.90 via patch Fix use-after-free of mbuf by ip6flow_create This fixes recent failures of some ATF tests such as t_ipsec_tunnel_odd. -- Fix use-after-free of mbuf by ip6flow_create (one more)
Pull up following revision(s) (requested by ozaki-r in ticket #1518): sys/netinet6/ip6_forward.c: 1.89-1.90 via patch Fix use-after-free of mbuf by ip6flow_create This fixes recent failures of some ATF tests such as t_ipsec_tunnel_odd. -- Fix use-after-free of mbuf by ip6flow_create (one more)
Pull up following revision(s) (requested by ozaki-r in ticket #1518): sys/netinet6/ip6_forward.c: 1.89-1.90 via patch Fix use-after-free of mbuf by ip6flow_create This fixes recent failures of some ATF tests such as t_ipsec_tunnel_odd. -- Fix use-after-free of mbuf by ip6flow_create (one more)
Pull up following revision(s) (requested by ozaki-r in ticket #1551): sys/netinet6/ip6_forward.c: 1.89-1.90 via patch Fix use-after-free of mbuf by ip6flow_create This fixes recent failures of some ATF tests such as t_ipsec_tunnel_odd. -- Fix use-after-free of mbuf by ip6flow_create (one more)
Pull up following revision(s) (requested by ozaki-r in ticket #1551): sys/netinet6/ip6_forward.c: 1.89-1.90 via patch Fix use-after-free of mbuf by ip6flow_create This fixes recent failures of some ATF tests such as t_ipsec_tunnel_odd. -- Fix use-after-free of mbuf by ip6flow_create (one more)
Pull up following revision(s) (requested by ozaki-r in ticket #1551): sys/netinet6/ip6_forward.c: 1.89-1.90 via patch Fix use-after-free of mbuf by ip6flow_create This fixes recent failures of some ATF tests such as t_ipsec_tunnel_odd. -- Fix use-after-free of mbuf by ip6flow_create (one more)
style
Fix two pretty bad mistakes. If ipsec6_check_policy fails m is not freed, and a 'goto out' is missing after ipsec6_process_packet.
Pull up following revision(s) (requested by ozaki-r in ticket #484): sys/netinet6/ip6_forward.c: 1.89-1.90 Fix use-after-free of mbuf by ip6flow_create This fixes recent failures of some ATF tests such as t_ipsec_tunnel_odd. -- Fix use-after-free of mbuf by ip6flow_create (one more)
Fix use-after-free of mbuf by ip6flow_create (one more) XXX need pullup-[678]
Fix use-after-free of mbuf by ip6flow_create This fixes recent failures of some ATF tests such as t_ipsec_tunnel_odd. XXX need pullup-[678]
update from HEAD
Pull up following revision(s) (requested by ozaki-r in ticket #300): crypto/dist/ipsec-tools/src/setkey/parse.y: 1.19 crypto/dist/ipsec-tools/src/setkey/token.l: 1.20 distrib/sets/lists/tests/mi: 1.754, 1.757, 1.759 doc/TODO.smpnet: 1.12-1.13 sys/net/pfkeyv2.h: 1.32 sys/net/raw_cb.c: 1.23-1.24, 1.28 sys/net/raw_cb.h: 1.28 sys/net/raw_usrreq.c: 1.57-1.58 sys/net/rtsock.c: 1.228-1.229 sys/netinet/in_proto.c: 1.125 sys/netinet/ip_input.c: 1.359-1.361 sys/netinet/tcp_input.c: 1.359-1.360 sys/netinet/tcp_output.c: 1.197 sys/netinet/tcp_var.h: 1.178 sys/netinet6/icmp6.c: 1.213 sys/netinet6/in6_proto.c: 1.119 sys/netinet6/ip6_forward.c: 1.88 sys/netinet6/ip6_input.c: 1.181-1.182 sys/netinet6/ip6_output.c: 1.193 sys/netinet6/ip6protosw.h: 1.26 sys/netipsec/ipsec.c: 1.100-1.122 sys/netipsec/ipsec.h: 1.51-1.61 sys/netipsec/ipsec6.h: 1.18-1.20 sys/netipsec/ipsec_input.c: 1.44-1.51 sys/netipsec/ipsec_netbsd.c: 1.41-1.45 sys/netipsec/ipsec_output.c: 1.49-1.64 sys/netipsec/ipsec_private.h: 1.5 sys/netipsec/key.c: 1.164-1.234 sys/netipsec/key.h: 1.20-1.32 sys/netipsec/key_debug.c: 1.18-1.21 sys/netipsec/key_debug.h: 1.9 sys/netipsec/keydb.h: 1.16-1.20 sys/netipsec/keysock.c: 1.59-1.62 sys/netipsec/keysock.h: 1.10 sys/netipsec/xform.h: 1.9-1.12 sys/netipsec/xform_ah.c: 1.55-1.74 sys/netipsec/xform_esp.c: 1.56-1.72 sys/netipsec/xform_ipcomp.c: 1.39-1.53 sys/netipsec/xform_ipip.c: 1.50-1.54 sys/netipsec/xform_tcp.c: 1.12-1.16 sys/rump/librump/rumpkern/Makefile.rumpkern: 1.170 sys/rump/librump/rumpnet/net_stub.c: 1.27 sys/sys/protosw.h: 1.67-1.68 tests/net/carp/t_basic.sh: 1.7 tests/net/if_gif/t_gif.sh: 1.11 tests/net/if_l2tp/t_l2tp.sh: 1.3 tests/net/ipsec/Makefile: 1.7-1.9 tests/net/ipsec/algorithms.sh: 1.5 tests/net/ipsec/common.sh: 1.4-1.6 tests/net/ipsec/t_ipsec_ah_keys.sh: 1.2 tests/net/ipsec/t_ipsec_esp_keys.sh: 1.2 tests/net/ipsec/t_ipsec_gif.sh: 1.6-1.7 tests/net/ipsec/t_ipsec_l2tp.sh: 1.6-1.7 tests/net/ipsec/t_ipsec_misc.sh: 1.8-1.18 tests/net/ipsec/t_ipsec_sockopt.sh: 1.1-1.2 tests/net/ipsec/t_ipsec_tcp.sh: 1.1-1.2 tests/net/ipsec/t_ipsec_transport.sh: 1.5-1.6 tests/net/ipsec/t_ipsec_tunnel.sh: 1.9 tests/net/ipsec/t_ipsec_tunnel_ipcomp.sh: 1.1-1.2 tests/net/ipsec/t_ipsec_tunnel_odd.sh: 1.3 tests/net/mcast/t_mcast.sh: 1.6 tests/net/net/t_ipaddress.sh: 1.11 tests/net/net_common.sh: 1.20 tests/net/npf/t_npf.sh: 1.3 tests/net/route/t_flags.sh: 1.20 tests/net/route/t_flags6.sh: 1.16 usr.bin/netstat/fast_ipsec.c: 1.22 Do m_pullup before mtod It may fix panicks of some tests on anita/sparc and anita/GuruPlug. --- KNF --- Enable DEBUG for babylon5 --- Apply C99-style struct initialization to xformsw --- Tweak outputs of netstat -s for IPsec - Get rid of "Fast" - Use ipsec and ipsec6 for titles to clarify protocol - Indent outputs of sub protocols Original outputs were organized like this: (Fast) IPsec: IPsec ah: IPsec esp: IPsec ipip: IPsec ipcomp: (Fast) IPsec: IPsec ah: IPsec esp: IPsec ipip: IPsec ipcomp: New outputs are organized like this: ipsec: ah: esp: ipip: ipcomp: ipsec6: ah: esp: ipip: ipcomp: --- Add test cases for IPComp --- Simplify IPSEC_OSTAT macro (NFC) --- KNF; replace leading whitespaces with hard tabs --- Introduce and use SADB_SASTATE_USABLE_P --- KNF --- Add update command for testing Updating an SA (SADB_UPDATE) requires that a process issuing SADB_UPDATE is the same as a process issued SADB_ADD (or SADB_GETSPI). This means that update command must be used with add command in a configuration of setkey. This usage is normally meaningless but useful for testing (and debugging) purposes. --- Add test cases for updating SA/SP The tests require newly-added udpate command of setkey. --- PR/52346: Frank Kardel: Fix checksumming for NAT-T See XXX for improvements. --- Remove codes for PACKET_TAG_IPSEC_IN_CRYPTO_DONE It seems that PACKET_TAG_IPSEC_IN_CRYPTO_DONE is for network adapters that have IPsec accelerators; a driver sets the mtag to a packet when its device has already encrypted the packet. Unfortunately no driver implements such offload features for long years and seems unlikely to implement them soon. (Note that neither FreeBSD nor Linux doesn't have such drivers.) Let's remove related (unused) codes and simplify the IPsec code. --- Fix usages of sadb_msg_errno --- Avoid updating sav directly On SADB_UPDATE a target sav was updated directly, which was unsafe. Instead allocate another sav, copy variables of the old sav to the new one and replace the old one with the new one. --- Simplify; we can assume sav->tdb_xform cannot be NULL while it's valid --- Rename key_alloc* functions (NFC) We shouldn't use the term "alloc" for functions that just look up data and actually don't allocate memory. --- Use explicit_memset to surely zero-clear key_auth and key_enc --- Make sure to clear keys on error paths of key_setsaval --- Add missing KEY_FREESAV --- Make sure a sav is inserted to a sah list after its initialization completes --- Remove unnecessary zero-clearing codes from key_setsaval key_setsaval is now used only for a newly-allocated sav. (It was used to reset variables of an existing sav.) --- Correct wrong assumption of sav->refcnt in key_delsah A sav in a list is basically not to be sav->refcnt == 0. And also KEY_FREESAV assumes sav->refcnt > 0. --- Let key_getsavbyspi take a reference of a returning sav --- Use time_mono_to_wall (NFC) --- Separate sending message routine (NFC) --- Simplify; remove unnecessary zero-clears key_freesaval is used only when a target sav is being destroyed. --- Omit NULL checks for sav->lft_c sav->lft_c can be NULL only when initializing or destroying sav. --- Omit unnecessary NULL checks for sav->sah --- Omit unnecessary check of sav->state key_allocsa_policy picks a sav of either MATURE or DYING so we don't need to check its state again. --- Simplify; omit unnecessary saidx passing - ipsec_nextisr returns a saidx but no caller uses it - key_checkrequest is passed a saidx but it can be gotton by another argument (isr) --- Fix splx isn't called on some error paths --- Fix header size calculation of esp where sav is NULL --- Fix header size calculation of ah in the case sav is NULL This fix was also needed for esp. --- Pass sav directly to opencrypto callback In a callback, use a passed sav as-is by default and look up a sav only if the passed sav is dead. --- Avoid examining freshness of sav on packet processing If a sav list is sorted (by lft_c->sadb_lifetime_addtime) in advance, we don't need to examine each sav and also don't need to delete one on the fly and send up a message. Fortunately every sav lists are sorted as we need. Added key_validate_savlist validates that each sav list is surely sorted (run only if DEBUG because it's not cheap). --- Add test cases for SAs with different SPIs --- Prepare to stop using isr->sav isr is a shared resource and using isr->sav as a temporal storage for each packet processing is racy. And also having a reference from isr to sav makes the lifetime of sav non-deterministic; such a reference is removed when a packet is processed and isr->sav is overwritten by new one. Let's have a sav locally for each packet processing instead of using shared isr->sav. However this change doesn't stop using isr->sav yet because there are some users of isr->sav. isr->sav will be removed after the users find a way to not use isr->sav. --- Fix wrong argument handling --- fix printf format. --- Don't validate sav lists of LARVAL or DEAD states We don't sort the lists so the validation will always fail. Fix PR kern/52405 --- Make sure to sort the list when changing the state by key_sa_chgstate --- Rename key_allocsa_policy to key_lookup_sa_bysaidx --- Separate test files --- Calculate ah_max_authsize on initialization as well as esp_max_ivlen --- Remove m_tag_find(PACKET_TAG_IPSEC_PENDING_TDB) because nobody sets the tag --- Restore a comment removed in previous The comment is valid for the below code. --- Make tests more stable sleep command seems to wait longer than expected on anita so use polling to wait for a state change. --- Add tests that explicitly delete SAs instead of waiting for expirations --- Remove invalid M_AUTHIPDGM check on ESP isr->sav M_AUTHIPDGM flag is set to a mbuf in ah_input_cb. An sav of ESP can have AH authentication as sav->tdb_authalgxform. However, in that case esp_input and esp_input_cb are used to do ESP decryption and AH authentication and M_AUTHIPDGM never be set to a mbuf. So checking M_AUTHIPDGM of a mbuf on isr->sav of ESP is meaningless. --- Look up sav instead of relying on unstable sp->req->sav This code is executed only in an error path so an additional lookup doesn't matter. --- Correct a comment --- Don't release sav if calling crypto_dispatch again --- Remove extra KEY_FREESAV from ipsec_process_done It should be done by the caller. --- Don't bother the case of crp->crp_buf == NULL in callbacks --- Hold a reference to an SP during opencrypto processing An SP has a list of isr (ipsecrequest) that represents a sequence of IPsec encryption/authentication processing. One isr corresponds to one opencrypto processing. The lifetime of an isr follows its SP. We pass an isr to a callback function of opencrypto to continue to a next encryption/authentication processing. However nobody guaranteed that the isr wasn't freed, i.e., its SP wasn't destroyed. In order to avoid such unexpected destruction of isr, hold a reference to its SP during opencrypto processing. --- Don't make SAs expired on tests that delete SAs explicitly --- Fix a debug message --- Dedup error paths (NFC) --- Use pool to allocate tdb_crypto For ESP and AH, we need to allocate an extra variable space in addition to struct tdb_crypto. The fixed size of pool items may be larger than an actual requisite size of a buffer, but still the performance improvement by replacing malloc with pool wins. --- Don't use unstable isr->sav for header size calculations We may need to optimize to not look up sav here for users that don't need to know an exact size of headers (e.g., TCP segmemt size caclulation). --- Don't use sp->req->sav when handling NAT-T ESP fragmentation In order to do this we need to look up a sav however an additional look-up degrades performance. A sav is later looked up in ipsec4_process_packet so delay the fragmentation check until then to avoid an extra look-up. --- Don't use key_lookup_sp that depends on unstable sp->req->sav It provided a fast look-up of SP. We will provide an alternative method in the future (after basic MP-ification finishes). --- Stop setting isr->sav on looking up sav in key_checkrequest --- Remove ipsecrequest#sav --- Stop setting mtag of PACKET_TAG_IPSEC_IN_DONE because there is no users anymore --- Skip ipsec_spi_*_*_preferred_new_timeout when running on qemu Probably due to PR 43997 --- Add localcount to rump kernels --- Remove unused macro --- Fix key_getcomb_setlifetime The fix adjusts a soft limit to be 80% of a corresponding hard limit. I'm not sure the fix is really correct though, at least the original code is wrong. A passed comb is zero-cleared before calling key_getcomb_setlifetime, so comb->sadb_comb_soft_addtime = comb->sadb_comb_soft_addtime * 80 / 100; is meaningless. --- Provide and apply key_sp_refcnt (NFC) It simplifies further changes. --- Fix indentation Pointed out by knakahara@ --- Use pslist(9) for sptree --- Don't acquire global locks for IPsec if NET_MPSAFE Note that the change is just to make testing easy and IPsec isn't MP-safe yet. --- Let PF_KEY socks hold their own lock instead of softnet_lock Operations on SAD and SPD are executed via PF_KEY socks. The operations include deletions of SAs and SPs that will use synchronization mechanisms such as pserialize_perform to wait for references to SAs and SPs to be released. It is known that using such mechanisms with holding softnet_lock causes a dead lock. We should avoid the situation. --- Make IPsec SPD MP-safe We use localcount(9), not psref(9), to make the sptree and secpolicy (SP) entries MP-safe because SPs need to be referenced over opencrypto processing that executes a callback in a different context. SPs on sockets aren't managed by the sptree and can be destroyed in softint. localcount_drain cannot be used in softint so we delay the destruction of such SPs to a thread context. To do so, a list to manage such SPs is added (key_socksplist) and key_timehandler_spd deletes dead SPs in the list. For more details please read the locking notes in key.c. Proposed on tech-kern@ and tech-net@ --- Fix updating ipsec_used - key_update_used wasn't called in key_api_spddelete2 and key_api_spdflush - key_update_used wasn't called if an SP had been added/deleted but a reply to userland failed --- Fix updating ipsec_used; turn on when SPs on sockets are added --- Add missing IPsec policy checks to icmp6_rip6_input icmp6_rip6_input is quite similar to rip6_input and the same checks exist in rip6_input. --- Add test cases for setsockopt(IP_IPSEC_POLICY) --- Don't use KEY_NEWSP for dummy SP entries By the change KEY_NEWSP is now not called from softint anymore and we can use kmem_zalloc with KM_SLEEP for KEY_NEWSP. --- Comment out unused functions --- Add test cases that there are SPs but no relevant SAs --- Don't allow sav->lft_c to be NULL lft_c of an sav that was created by SADB_GETSPI could be NULL. --- Clean up clunky eval strings - Remove unnecessary \ at EOL - This allows to omit ; too - Remove unnecessary quotes for arguments of atf_set - Don't expand $DEBUG in eval - We expect it's expanded on execution Suggested by kre@ --- Remove unnecessary KEY_FREESAV in an error path sav should be freed (unreferenced) by the caller. --- Use pslist(9) for sahtree --- Use pslist(9) for sah->savtree --- Rename local variable newsah to sah It may not be new. --- MP-ify SAD slightly - Introduce key_sa_mtx and use it for some list operations - Use pserialize for some list iterations --- Introduce KEY_SA_UNREF and replace KEY_FREESAV with it where sav will never be actually freed in the future KEY_SA_UNREF is still key_freesav so no functional change for now. This change reduces diff of further changes. --- Remove out-of-date log output Pointed out by riastradh@ --- Use KDASSERT instead of KASSERT for mutex_ownable Because mutex_ownable is too heavy to run in a fast path even for DIAGNOSTIC + LOCKDEBUG. Suggested by riastradh@ --- Assemble global lists and related locks into cache lines (NFCI) Also rename variable names from *tree to *list because they are just lists, not trees. Suggested by riastradh@ --- Move locking notes --- Update the locking notes - Add locking order - Add locking notes for misc lists such as reglist - Mention pserialize, key_sp_ref and key_sp_unref on SP operations Requested by riastradh@ --- Describe constraints of key_sp_ref and key_sp_unref Requested by riastradh@ --- Hold key_sad.lock on SAVLIST_WRITER_INSERT_TAIL --- Add __read_mostly to key_psz Suggested by riastradh@ --- Tweak wording (pserialize critical section => pserialize read section) Suggested by riastradh@ --- Add missing mutex_exit --- Fix setkey -D -P outputs The outputs were tweaked (by me), but I forgot updating libipsec in my local ATF environment... --- MP-ify SAD (key_sad.sahlist and sah entries) localcount(9) is used to protect key_sad.sahlist and sah entries as well as SPD (and will be used for SAD sav). Please read the locking notes of SAD for more details. --- Introduce key_sa_refcnt and replace sav->refcnt with it (NFC) --- Destroy sav only in the loop for DEAD sav --- Fix KASSERT(solocked(sb->sb_so)) failure in sbappendaddr that is called eventually from key_sendup_mbuf If key_sendup_mbuf isn't passed a socket, the assertion fails. Originally in this case sb->sb_so was softnet_lock and callers held softnet_lock so the assertion was magically satisfied. Now sb->sb_so is key_so_mtx and also softnet_lock isn't always held by callers so the assertion can fail. Fix it by holding key_so_mtx if key_sendup_mbuf isn't passed a socket. Reported by knakahara@ Tested by knakahara@ and ozaki-r@ --- Fix locking notes of SAD --- Fix deadlock between key_sendup_mbuf called from key_acquire and localcount_drain If we call key_sendup_mbuf from key_acquire that is called on packet processing, a deadlock can happen like this: - At key_acquire, a reference to an SP (and an SA) is held - key_sendup_mbuf will try to take key_so_mtx - Some other thread may try to localcount_drain to the SP with holding key_so_mtx in say key_api_spdflush - In this case localcount_drain never return because key_sendup_mbuf that has stuck on key_so_mtx never release a reference to the SP Fix the deadlock by deferring key_sendup_mbuf to the timer (key_timehandler). --- Fix that prev isn't cleared on retry --- Limit the number of mbufs queued for deferred key_sendup_mbuf It's easy to be queued hundreds of mbufs on the list under heavy network load. --- MP-ify SAD (savlist) localcount(9) is used to protect savlist of sah. The basic design is similar to MP-ifications of SPD and SAD sahlist. Please read the locking notes of SAD for more details. --- Simplify ipsec_reinject_ipstack (NFC) --- Add per-CPU rtcache to ipsec_reinject_ipstack It reduces route lookups and also reduces rtcache lock contentions when NET_MPSAFE is enabled. --- Use pool_cache(9) instead of pool(9) for tdb_crypto objects The change improves network throughput especially on multi-core systems. --- Update ipsec(4), opencrypto(9) and vlan(4) are now MP-safe. --- Write known issues on scalability --- Share a global dummy SP between PCBs It's never be changed so it can be pre-allocated and shared safely between PCBs. --- Fix race condition on the rawcb list shared by rtsock and keysock keysock now protects itself by its own mutex, which means that the rawcb list is protected by two different mutexes (keysock's one and softnet_lock for rtsock), of course it's useless. Fix the situation by having a discrete rawcb list for each. --- Use a dedicated mutex for rt_rawcb instead of softnet_lock if NET_MPSAFE --- fix localcount leak in sav. fixed by ozaki-r@n.o. I commit on behalf of him. --- remove unnecessary comment. --- Fix deadlock between pserialize_perform and localcount_drain A typical ussage of localcount_drain looks like this: mutex_enter(&mtx); item = remove_from_list(); pserialize_perform(psz); localcount_drain(&item->localcount, &cv, &mtx); mutex_exit(&mtx); This sequence can cause a deadlock which happens for example on the following situation: - Thread A calls localcount_drain which calls xc_broadcast after releasing a specified mutex - Thread B enters the sequence and calls pserialize_perform with holding the mutex while pserialize_perform also calls xc_broadcast - Thread C (xc_thread) that calls an xcall callback of localcount_drain tries to hold the mutex xc_broadcast of thread B doesn't start until xc_broadcast of thread A finishes, which is a feature of xcall(9). This means that pserialize_perform never complete until xc_broadcast of thread A finishes. On the other hand, thread C that is a callee of xc_broadcast of thread A sticks on the mutex. Finally the threads block each other (A blocks B, B blocks C and C blocks A). A possible fix is to serialize executions of the above sequence by another mutex, but adding another mutex makes the code complex, so fix the deadlock by another way; the fix is to release the mutex before pserialize_perform and instead use a condvar to prevent pserialize_perform from being called simultaneously. Note that the deadlock has happened only if NET_MPSAFE is enabled. --- Add missing ifdef NET_MPSAFE --- Take softnet_lock on pr_input properly if NET_MPSAFE Currently softnet_lock is taken unnecessarily in some cases, e.g., icmp_input and encap4_input from ip_input, or not taken even if needed, e.g., udp_input and tcp_input from ipsec4_common_input_cb. Fix them. NFC if NET_MPSAFE is disabled (default). --- - sanitize key debugging so that we don't print extra newlines or unassociated debugging messages. - remove unused functions and make internal ones static - print information in one line per message --- humanize printing of ip addresses --- cast reduction, NFC. --- Fix typo in comment --- Pull out ipsec_fill_saidx_bymbuf (NFC) --- Don't abuse key_checkrequest just for looking up sav It does more than expected for example key_acquire. --- Fix SP is broken on transport mode isr->saidx was modified accidentally in ipsec_nextisr. Reported by christos@ Helped investigations by christos@ and knakahara@ --- Constify isr at many places (NFC) --- Include socketvar.h for softnet_lock --- Fix buffer length for ipsec_logsastr
Sync with HEAD
Make IPsec SPD MP-safe We use localcount(9), not psref(9), to make the sptree and secpolicy (SP) entries MP-safe because SPs need to be referenced over opencrypto processing that executes a callback in a different context. SPs on sockets aren't managed by the sptree and can be destroyed in softint. localcount_drain cannot be used in softint so we delay the destruction of such SPs to a thread context. To do so, a list to manage such SPs is added (key_socksplist) and key_timehandler_spd deletes dead SPs in the list. For more details please read the locking notes in key.c. Proposed on tech-kern@ and tech-net@
Sync with HEAD
Add missing KEY_FREESP to ip6_forward
Sync with HEAD
Sync with HEAD
Do ND in L2_output in the same manner as arpresolve The benefits of this change are: - The flow is consistent with IPv4 (and FreeBSD and OpenBSD) - old: ip6_output => nd6_output (do ND if needed) => L2_output (lookup a stored cache) - new: ip6_output => L2_output (lookup a cache. Do ND if cache not found) - We can remove some workarounds in nd6_output - We can move L2 specific operations to their own place - The performance slightly improves because one cache lookup is reduced
Sync with HEAD
ip6_sprintf -> IN6_PRINT so that we pass the size.
Make ip6_sprintf(), in_fmtaddr(), lla_snprintf() and icmp6_redirect_diag() mpsafe. Reviewed by ozaki-r@
Get rid of unnecessary header inclusions
Sync with HEAD. (Note that most of these changes are simply $NetBSD$ tag issues.)
Add rtcache_unref to release points of rtentry stemming from rtcache In the MP-safe world, a rtentry stemming from a rtcache can be freed at any points. So we need to protect rtentries somehow say by reference couting or passive references. Regardless of the method, we need to call some release function of a rtentry after using it. The change adds a new function rtcache_unref to release a rtentry. At this point, this function does nothing because for now we don't add a reference to a rtentry when we get one from a rtcache. We will add something useful in a further commit. This change is a part of changes for MP-safe routing table. It is separated to avoid one big change that makes difficult to debug by bisecting.
Sync with HEAD
Make ipforward_rt and ip6_forward_rt percpu Sharing one rtcache between CPUs is just a bad idea. Reviewed by knakahara@
Sync with HEAD
Add missing NULL checks for m_get_rcvif_psref
Avoid storing a pointer of an interface in a mbuf
Having a pointer of an interface in a mbuf isn't safe if we remove big
kernel locks; an interface object (ifnet) can be destroyed anytime in any
packet processing and accessing such object via a pointer is racy. Instead
we have to get an object from the interface collection (ifindex2ifnet) via
an interface index (if_index) that is stored to a mbuf instead of an
pointer.
The change provides two APIs: m_{get,put}_rcvif_psref that use psref(9)
for sleep-able critical sections and m_{get,put}_rcvif that use
pserialize(9) for other critical sections. The change also adds another
API called m_get_rcvif_NOMPSAFE, that is NOT MP-safe and for transition
moratorium, i.e., it is intended to be used for places where are not
planned to be MP-ified soon.
The change adds some overhead due to psref to performance sensitive paths,
however the overhead is not serious, 2% down at worst.
Proposed on tech-kern and tech-net.
Sync with HEAD
sprinkle _KERNEL_OPT
Use time_uptime instead of time_second to avoid time leaps Some codes in sys/net* use time_second to manage time periods such as cache expirations. However, time_second doesn't increase monotonically and can leap by say settimeofday(2) according to time_second(9). We should use time_uptime instead of it to avoid such time leaps. This change replaces time_second with time_uptime. Additionally it converts a time based on time_uptime to a time based on time_second when the kernel passes the time to userland programs that expect the latter, and vice versa. Note that we shouldn't leak time_uptime to other hosts over the netowrk. My investigation shows there is no such leak: http://mail-index.netbsd.org/tech-net/2015/08/06/msg005332.html Discussed on tech-kern and tech-net.
Sync with HEAD
Pull up following revision(s) (requested by maxv in ticket #427): sys/compat/svr4/svr4_schedctl.c: revision 1.8 sys/netinet/tcp_timer.c: revision 1.88 sys/miscfs/genfs/layer_vfsops.c: revision 1.45 sys/compat/svr4/svr4_ioctl.c: revision 1.37 sys/ufs/chfs/chfs_vfsops.c: revision 1.14 sys/miscfs/fdesc/fdesc_vfsops.c: revision 1.91 sys/compat/linux/arch/i386/linux_ptrace.c: revision 1.30 sys/compat/common/kern_time_50.c: revision 1.28 sys/netinet6/ip6_forward.c: revision 1.74 sys/miscfs/umapfs/umap_vnops.c: revision 1.57 sys/compat/svr4/svr4_fcntl.c: revision 1.74 distrib/sets/lists/comp/mi: revision 1.1931 sys/netinet6/udp6_output.c: revision 1.46 sys/fs/puffs/puffs_compat.c: revision 1.3 sys/fs/udf/udf_rename.c: revision 1.11 sys/compat/svr4/svr4_filio.c: revision 1.24 sys/fs/udf/udf_rename.c: revision 1.12 sys/netinet/tcp_usrreq.c: revision 1.202 sys/miscfs/umapfs/umap_subr.c: revision 1.29 sys/compat/linux/common/linux_fadvise64.c: revision 1.3 sys/netinet/if_atm.c: revision 1.34 sys/miscfs/procfs/procfs_subr.c: revision 1.106 sys/miscfs/genfs/layer_subr.c: revision 1.37 sys/netinet/tcp_sack.c: revision 1.30 sys/compat/freebsd/freebsd_misc.c: revision 1.33 sys/compat/freebsd/freebsd_file.c: revision 1.33 sys/ufs/chfs/chfs_vnode.c: revision 1.12 sys/compat/svr4/svr4_ttold.c: revision 1.34 sys/compat/linux/common/linux_file.c: revision 1.114 sys/compat/linux/arch/mips/linux_machdep.c: revision 1.43 sys/compat/linux/common/linux_signal.c: revision 1.76 sys/compat/common/compat_util.c: revision 1.46 sys/compat/linux/arch/arm/linux_ptrace.c: revision 1.18 sys/compat/svr4/svr4_sockio.c: revision 1.36 sys/compat/linux/arch/arm/linux_machdep.c: revision 1.32 sys/compat/svr4/svr4_signal.c: revision 1.66 sys/kern/kern_exec.c: revision 1.410 sys/fs/puffs/puffs_vfsops.c: revision 1.115 sys/compat/svr4/svr4_exec_elf64.c: revision 1.15 sys/compat/linux/arch/i386/linux_machdep.c: revision 1.159 sys/compat/linux/arch/alpha/linux_machdep.c: revision 1.50 sys/compat/linux32/common/linux32_misc.c: revision 1.24 sys/netinet/in_pcb.c: revision 1.153 sys/sys/malloc.h: revision 1.116 sys/compat/common/if_43.c: revision 1.9 share/man/man9/Makefile: revision 1.380 sys/netinet/tcp_vtw.c: revision 1.12 sys/miscfs/umapfs/umap_vfsops.c: revision 1.95 sys/ufs/ext2fs/ext2fs_vfsops.c: revision 1.186 sys/compat/common/uipc_syscalls_43.c: revision 1.46 sys/ufs/ext2fs/ext2fs_vnops.c: revision 1.115 sys/fs/puffs/puffs_msgif.c: revision 1.97 sys/compat/svr4/svr4_ipc.c: revision 1.27 sys/compat/linux/common/linux_exec.c: revision 1.117 sys/ufs/ext2fs/ext2fs_readwrite.c: revision 1.66 sys/netinet/tcp_output.c: revision 1.179 sys/compat/svr4/svr4_termios.c: revision 1.28 sys/fs/udf/udf_strat_bootstrap.c: revision 1.4 sys/fs/puffs/puffs_subr.c: revision 1.67 sys/fs/puffs/puffs_node.c: revision 1.36 sys/miscfs/overlay/overlay_vnops.c: revision 1.21 sys/fs/cd9660/cd9660_node.c: revision 1.34 sys/netinet/raw_ip.c: revision 1.146 sys/sys/mallocvar.h: revision 1.13 sys/miscfs/overlay/overlay_vfsops.c: revision 1.63 share/man/man9/malloc.9: revision 1.50 sys/netinet6/dest6.c: revision 1.18 sys/compat/linux/common/linux_uselib.c: revision 1.33 sys/compat/linux/common/linux_socket.c: revision 1.120 share/man/man9/malloc.9: revision 1.51 sys/netinet/tcp_subr.c: revision 1.257 sys/compat/linux/common/linux_socketcall.c: revision 1.45 sys/compat/linux/common/linux_fadvise64_64.c: revision 1.3 sys/compat/freebsd/freebsd_ipc.c: revision 1.17 sys/compat/linux/common/linux_misc_notalpha.c: revision 1.109 sys/compat/linux/arch/alpha/linux_pipe.c: revision 1.17 sys/netinet6/in6_pcb.c: revision 1.132 sys/netinet6/in6_ifattach.c: revision 1.94 sys/compat/svr4/svr4_exec_elf32.c: revision 1.15 sys/miscfs/nullfs/null_vfsops.c: revision 1.90 sys/fs/cd9660/cd9660_util.c: revision 1.12 sys/compat/linux/arch/powerpc/linux_machdep.c: revision 1.48 sys/compat/freebsd/freebsd_exec_elf32.c: revision 1.20 sys/miscfs/procfs/procfs_vfsops.c: revision 1.94 sys/compat/linux/arch/powerpc/linux_ptrace.c: revision 1.28 sys/compat/linux/common/linux_sched.c: revision 1.67 sys/compat/linux/common/linux_exec_aout.c: revision 1.67 sys/compat/linux/common/linux_pipe.c: revision 1.67 sys/compat/linux/common/linux_llseek.c: revision 1.34 sys/compat/linux/arch/mips/linux_ptrace.c: revision 1.10 Do not uselessly include <sys/malloc.h>. Cleanup: - remove struct kmembuckets (dead) - correctly deadify MALLOC_XX - remove MALLOC_DEFINE_LIMIT and MALLOC_JUSTDEFINE_LIMIT (dead) - remove malloc_roundup(), malloc_type_setlimit(), MALLOC_DEFINE_LIMIT() and MALLOC_JUSTDEFINE_LIMIT() from man 9 malloc New sentence, new line. Bump date for previous. Obsolete malloc_roundup(9), malloc_type_setlimit(9) and MALLOC_DEFINE_LIMIT(9) man pages.
call vsnprintf instead of snprintf; provide more detail
Merge some common code in the failed forwarding case, while providing better diagnostics, and fixing leaks.
Do not uselessly include <sys/malloc.h>.
Rebase to HEAD as of a few days ago.
Rebase.
Introduce 2 new variables: ipsec_enabled and ipsec_used. Ipsec enabled is controlled by sysctl and determines if is allowed. ipsec_used is set automatically based on ipsec being enabled, and rules existing.
sync with head.
for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.
this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")
sync with head
- Rewrite parts of pfil(9): use array to store hooks and thus be more cache friendly (there are only few hooks in the system). Make the structures opaque and the interface more strict. - Remove PFIL_HOOKS option by making pfil(9) mandatory.
resync from head
IPSEC has not come in two speeds for a long time now (IPSEC == kame, FAST_IPSEC). Make everything refer to IPSEC to avoid confusion.
sync with head
sync to latest -current.
remove KAME IPSEC, replaced by FAST_IPSEC
merge to -current.
rename the IPSEC in-kernel CPP variable and config(8) option to KAME_IPSEC, and make IPSEC define it so that existing kernel config files work as before Now the default can be easily be changed to FAST_IPSEC just by setting the IPSEC alias to FAST_IPSEC.
sync to netbsd-5
sync with head
Explicitly include opt_gateway.h when depending on GATEWAY.
Pull up the following revisions(s) (requested by joerg in ticket #1366): sys/netinet6/ip6_forward.c: revision 1.67 Clear cksum flags before any further processing like ip_forward does. Many drivers set the UDP/TCP v4 flags even for v6 traffic and if the packet is encapsulated with gif, the IPv6 header would get corrupted by ip_output.
Pull up the following revisions(s) (requested by joerg in ticket #1366): sys/netinet6/ip6_forward.c: revision 1.67 Clear cksum flags before any further processing like ip_forward does. Many drivers set the UDP/TCP v4 flags even for v6 traffic and if the packet is encapsulated with gif, the IPv6 header would get corrupted by ip_output.
Pull up the following revisions(s) (requested by joerg in ticket #1139): sys/netinet6/ip6_forward.c: revision 1.67 Clear cksum flags before any further processing like ip_forward does. Many drivers set the UDP/TCP v4 flags even for v6 traffic and if the packet is encapsulated with gif, the IPv6 header would get corrupted by ip_output.
Pull up the following revisions(s) (requested by joerg in ticket #1139): sys/netinet6/ip6_forward.c: revision 1.67 Clear cksum flags before any further processing like ip_forward does. Many drivers set the UDP/TCP v4 flags even for v6 traffic and if the packet is encapsulated with gif, the IPv6 header would get corrupted by ip_output.
Clear cksum flags before any further processing like ip_forward does. Many drivers set the UDP/TCP v4 flags even for v6 traffic and if the packet is encapsulated with gif, the IPv6 header would get corrupted by ip_output. Patch suggested by bad@
Sync with HEAD. Commit is split, to avoid a "too many arguments" protocol error.
sync with head.
Sync with HEAD.
bzero -> memset
Sync with HEAD.
sync with head.
Make IPSEC and FAST_IPSEC stats per-cpu. Use <net/net_stats.h> and netstat_sysctl().
Make ip6 and icmp6 stats per-cpu.
Change IPv6 stats from a structure to an array of uint64_t's. Note: This is ABI-compatible with the old ip6stat structure; old netstat binaries will continue to work properly.
sync with HEAD
imported Mobile IPv6 code developed by the SHISA project (http://www.mobileip.jp/).
Sync with HEAD.
sync with head
Sync with HEAD
Use rtcache_validate() instead of rtcache_getrt(). Shorten staircase in in6_losing().
Good-bye, rtcache_check(). Call both rtcache_validate() and rtcache_update(,1) instead of rtcache_check().
Sync with HEAD
Save some rtcache_getrt() calls.
sync with HEAD
Sync with HEAD
Sync with head.
Poison struct route->ro_rt uses in the kernel by changing the name to _ro_rt. Use rtcache_getrt() to access a route cache's struct rtentry *. Introduce struct ifnet->if_dl that always points at the interface identifier/link-layer address. Make code that treated the first ifaddr on struct ifnet->if_addrlist as the interface address use if_dl, instead. Remove stale debugging code from net/route.c. Move the rtflush() code into rtcache_clear() and delete rtflush(). Delete rtalloc(), because nothing uses it any more. Make ND6_HINT an inline, lowercase subroutine, nd6_hint. I've done my best to convert IP Filter, the ISO stack, and the AppleTalk stack to rtcache_getrt(). They compile, but I have not tested them. I have given the changes to PF, GRE, IPv4 and IPv6 stacks a lot of exercise.
sync with head.
Sync with head.
Sync with head.
Update to today's netbsd-4.
Pull up following revision(s) (requested by degroote in ticket #667): sys/netinet/tcp_input.c: revision 1.260 sys/netinet/tcp_output.c: revision 1.154 sys/netinet/tcp_subr.c: revision 1.210 sys/netinet6/icmp6.c: revision 1.129 sys/netinet6/in6_proto.c: revision 1.70 sys/netinet6/ip6_forward.c: revision 1.54 sys/netinet6/ip6_input.c: revision 1.94 sys/netinet6/ip6_output.c: revision 1.114 sys/netinet6/raw_ip6.c: revision 1.81 sys/netipsec/ipcomp_var.h: revision 1.4 sys/netipsec/ipsec.c: revision 1.26 via patch,1.31-1.32 sys/netipsec/ipsec6.h: revision 1.5 sys/netipsec/ipsec_input.c: revision 1.14 sys/netipsec/ipsec_netbsd.c: revision 1.18,1.26 sys/netipsec/ipsec_output.c: revision 1.21 via patch sys/netipsec/key.c: revision 1.33,1.44 sys/netipsec/xform_ipcomp.c: revision 1.9 sys/netipsec/xform_ipip.c: revision 1.15 sys/opencrypto/deflate.c: revision 1.8 Commit my SoC work Add ipv6 support for fast_ipsec Note that currently, packet with extensions headers are not correctly supported Change the ipcomp logic Add sysctl tree to modify the fast_ipsec options related to ipv6. Similar to the sysctl kame interface. Choose the good default policy, depending of the adress family of the desired policy Increase the refcount for the default ipv6 policy so nobody can reclaim it Always compute the sp index even if we don't have any sp in spd. It will let us to choose the right default policy (based on the adress family requested). While here, fix an error message Use dynamic array instead of an static array to decompress. It lets us to decompress any data, whatever is the radio decompressed data / compressed data. It fixes the last issues with fast_ipsec and ipcomp. While here, bzero -> memset, bcopy -> memcpy, FREE -> free Reviewed a long time ago by sam@
Ansify + add a few comments, from Karl Sjödahl
sync with head.
Eliminate address family-specific route caches (struct route, struct
route_in6, struct route_iso), replacing all caches with a struct
route.
The principle benefit of this change is that all of the protocol
families can benefit from route cache-invalidation, which is
necessary for correct routing. Route-cache invalidation fixes an
ancient PR, kern/3508, at long last; it fixes various other PRs,
also.
Discussions with and ideas from Joerg Sonnenberger influenced this
work tremendously. Of course, all design oversights and bugs are
mine.
DETAILS
1 I added to each address family a pool of sockaddrs. I have
introduced routines for allocating, copying, and duplicating,
and freeing sockaddrs:
struct sockaddr *sockaddr_alloc(sa_family_t af, int flags);
struct sockaddr *sockaddr_copy(struct sockaddr *dst,
const struct sockaddr *src);
struct sockaddr *sockaddr_dup(const struct sockaddr *src, int flags);
void sockaddr_free(struct sockaddr *sa);
sockaddr_alloc() returns either a sockaddr from the pool belonging
to the specified family, or NULL if the pool is exhausted. The
returned sockaddr has the right size for that family; sa_family
and sa_len fields are initialized to the family and sockaddr
length---e.g., sa_family = AF_INET and sa_len = sizeof(struct
sockaddr_in). sockaddr_free() puts the given sockaddr back into
its family's pool.
sockaddr_dup() and sockaddr_copy() work analogously to strdup()
and strcpy(), respectively. sockaddr_copy() KASSERTs that the
family of the destination and source sockaddrs are alike.
The 'flags' argumet for sockaddr_alloc() and sockaddr_dup() is
passed directly to pool_get(9).
2 I added routines for initializing sockaddrs in each address
family, sockaddr_in_init(), sockaddr_in6_init(), sockaddr_iso_init(),
etc. They are fairly self-explanatory.
3 structs route_in6 and route_iso are no more. All protocol families
use struct route. I have changed the route cache, 'struct route',
so that it does not contain storage space for a sockaddr. Instead,
struct route points to a sockaddr coming from the pool the sockaddr
belongs to. I added a new method to struct route, rtcache_setdst(),
for setting the cache destination:
int rtcache_setdst(struct route *, const struct sockaddr *);
rtcache_setdst() returns 0 on success, or ENOMEM if no memory is
available to create the sockaddr storage.
It is now possible for rtcache_getdst() to return NULL if, say,
rtcache_setdst() failed. I check the return value for NULL
everywhere in the kernel.
4 Each routing domain (struct domain) has a list of live route
caches, dom_rtcache. rtflushall(sa_family_t af) looks up the
domain indicated by 'af', walks the domain's list of route caches
and invalidates each one.
Sync with HEAD.
Add IPv6 Fast Forward - the IPv4 counterpart: If ip6_forward successfully forwards a packet, a cache, in this case a ip6flow struct entry, will be created. ether_input and friends will then be able to call ip6flow_fastforward with the packet which will then be passed to if_output (unless an issue is found - in that case the packet is passed back to ip6_input). ok matt@ christos@ dyoung@ and joerg@
- sync with head. - move sched_changepri back to kern_synch.c as it doesn't know PPQ anymore.
sync with head.
KNF: de-__P, bzero -> memset, bcmp -> memcmp. Remove extraneous
parentheses in return statements.
Cosmetic: don't open-code TAILQ_FOREACH().
Cosmetic: change types of variables to avoid oodles of casts: in
in6_src.c, avoid casts by changing several route_in6 pointers
to struct route pointers. Remove unnecessary casts to caddr_t
elsewhere.
Pave the way for eliminating address family-specific route caches:
soon, struct route will not embed a sockaddr, but it will hold
a reference to an external sockaddr, instead. We will set the
destination sockaddr using rtcache_setdst(). (I created a stub
for it, but it isn't used anywhere, yet.) rtcache_free() will
free the sockaddr. I have extracted from rtcache_free() a helper
subroutine, rtcache_clear(). rtcache_clear() will "forget" a
cached route, but it will not forget the destination by releasing
the sockaddr. I use rtcache_clear() instead of rtcache_free()
in rtcache_update(), because rtcache_update() is not supposed
to forget the destination.
Constify:
1 Introduce const accessor for route->ro_dst, rtcache_getdst().
2 Constify the 'dst' argument to ifnet->if_output(). This
led me to constify a lot of code called by output routines.
3 Constify the sockaddr argument to protosw->pr_ctlinput. This
led me to constify a lot of code called by ctlinput routines.
4 Introduce const macros for converting from a generic sockaddr
to family-specific sockaddrs, e.g., sockaddr_in: satocsin6,
satocsin, et cetera.
Commit my SoC work Add ipv6 support for fast_ipsec Note that currently, packet with extensions headers are not correctly supported Change the ipcomp logic
Sync with head.
bzero -> memset
Sync with head.
sync with head.
sync with head.
Introduce new helper functions to abstract the route caching. rtcache_init and rtcache_init_noclone lookup ro_dst and store the result in ro_rt, taking care of the reference counting and calling the domain specific route cache. rtcache_free checks if a route was cashed and frees the reference. rtcache_copy copies ro_dst of the given struct route, checking that enough space is available and incrementing the reference count of the cached rtentry if necessary. rtcache_check validates that the cached route is still up. If it isn't, it tries to look it up again. Afterwards ro_rt is either a valid again or NULL. rtcache_copy is used internally. Adjust to callers of rtalloc/rtflush in the tree to check the sanity of ro_dst first (if necessary). If it doesn't fit the expectations, free the cache, otherwise check if the cached route is still valid. After that combination, a single check for ro_rt == NULL is enough to decide whether a new lookup needs to be done with a different ro_dst. Make the route checking in gre stricter by repeating the loop check after revalidation. Remove some unused RADIX_MPATH code in in6_src.c. The logic is slightly changed here to first validate the route and check RTF_GATEWAY afterwards. This is sementically equivalent though. etherip doesn't need sc_route_expire similiar to the gif changes from dyoung@ earlier. Based on the earlier patch from dyoung@, reviewed and discussed with him.
sync with head.
Here are various changes designed to protect against bad IPv4 routing caused by stale route caches (struct route). Route caches are sprinkled throughout PCBs, the IP fast-forwarding table, and IP tunnel interfaces (gre, gif, stf). Stale IPv6 and ISO route caches will be treated by separate patches. Thank you to Christoph Badura for suggesting the general approach to invalidating route caches that I take here. Here are the details: Add hooks to struct domain for tracking and for invalidating each domain's route caches: dom_rtcache, dom_rtflush, and dom_rtflushall. Introduce helper subroutines, rtflush(ro) for invalidating a route cache, rtflushall(family) for invalidating all route caches in a routing domain, and rtcache(ro) for notifying the domain of a new cached route. Chain together all IPv4 route caches where ro_rt != NULL. Provide in_rtcache() for adding a route to the chain. Provide in_rtflush() and in_rtflushall() for invalidating IPv4 route caches. In in_rtflush(), set ro_rt to NULL, and remove the route from the chain. In in_rtflushall(), walk the chain and remove every route cache. In rtrequest1(), call rtflushall() to invalidate route caches when a route is added. In gif(4), discard the workaround for stale caches that involves expiring them every so often. Replace the pattern 'RTFREE(ro->ro_rt); ro->ro_rt = NULL;' with a call to rtflush(ro). Update ipflow_fastforward() and all other users of route caches so that they expect a cached route, ro->ro_rt, to turn to NULL. Take care when moving a 'struct route' to rtflush() the source and to rtcache() the destination. In domain initializers, use .dom_xxx tags. KNF here and there.
Use the queue(3) macros instead of open-coding them. Shorten staircases. Remove unnecessary casts. Where appropriate, s/8/NBBY/. De-__P(). KNF. No functional changes intended.
sync with head
sync with head
Merge from HEAD.
Fix a minor printf found while reading the code
sync with head.
sync with head.
Sync with head.
merge FreeBSD timecounters from branch simonb-timecounters
- struct timeval time is gone
time.tv_sec -> time_second
- struct timeval mono_time is gone
mono_time.tv_sec -> time_uptime
- access to time via
{get,}{micro,nano,bin}time()
get* versions are fast but less precise
- support NTP nanokernel implementation (NTP API 4)
- further reading:
Timecounter Paper: http://phk.freebsd.dk/pubs/timecounter.pdf
NTP Nanokernel: http://www.eecis.udel.edu/~mills/ntp/html/kern.html
Adapt for timecounters: mostly use get*time(), use bintime's for timeout calculations and use "time_second" instead of "time.tv_sec".
sync with head.
Better support of IPv6 scoped addresses.
- most of the kernel code will not care about the actual encoding of
scope zone IDs and won't touch "s6_addr16[1]" directly.
- similarly, most of the kernel code will not care about link-local
scoped addresses as a special case.
- scope boundary check will be stricter. For example, the current
*BSD code allows a packet with src=::1 and dst=(some global IPv6
address) to be sent outside of the node, if the application do:
s = socket(AF_INET6);
bind(s, "::1");
sendto(s, some_global_IPv6_addr);
This is clearly wrong, since ::1 is only meaningful within a single
node, but the current implementation of the *BSD kernel cannot
reject this attempt.
- and, while there, don't try to remove the ff02::/32 interface route
entry in in6_ifdetach() as it's already gone.
This also includes some level of support for the standard source
address selection algorithm defined in RFC3484, which will be
completed on in the future.
From the KAME project via JINMEI Tatuya.
Approved by core@.
merge ktrace-lwp.
Sync with HEAD. Here we go again...
- avoid shadowed variables - sprinkle const.
sync with -current
sync with head. xen and whitespace. xen part is not finished.
Sync with HEAD. Hi Perry!
nuke trailing whitespace
Fix the sync with head I botched.
Sync with HEAD.
Sync with HEAD
prevent mbuf leak on IPsec tunnel mode. from iij seil team
error could be left uninitialized when we jump into "senderr"
Pullup rev 1.39 (requested by itojun in ticket #99) Shouldn't check scope match when encapsulating packet into tunnel mode.
Pullup rev 1.38 (requested by itojun in ticket #96) Do not deref state.ro if it is NULL.
Pullup patch (requested by itojun in ticket #94) Correctly look at outer IPv6 header when forwarding packet into ipsec tunnel.
when ipsec tunnel mode is applied, we are originating packet (instead of forwarding). go to ip6_output() path for fragmentation and other processing. from kame
Do a jump optimization that eliminates some uninitialized variable warnings.
Pull up revision 1.39 (requested by itojun in ticket #1504): shouldn't check scope match when encapsulating packet into tunnel mode. iij seil team
shouldn't check scope match when encapsulating packet into tunnel mode. iij seil team
Pull up revision 1.38 (requested by itojun in ticket #1501): do not deref state.ro if it is NULL
Pull up revision 1.37 via patch (requested by itojun in ticket #1500): correctly look at outer IPv6 header when forwarding packet into ipsec tunnel. iij seil team
do not deref state.ro if it is NULL
correctly look at outer IPv6 header when forwarding packet into ipsec tunnel. iij seil team
make net.inet6.ip6.redirect actually work. from Tomoyuki Sahara via kame
minor KNF
KNF
use time.tv_sec directly
Pull up revision 1.22 (requested by itojun): do not forward packet back to point-to-point interface, if the packet matches the ipv6 prefix assigned to the p2p interface (= redirect case). this leads to pingpong, chews bandwidth. bad thing is that bad guy from remote can chew bandwidth. (follows upcoming internet draft)
sys/netinet6/ip6_forward.c 1.20 via patch Need opt_pfil_hooks.h for PFIL_HOOK. (masanobu)
sync kqueue with -current; this includes merge of gehenna-devsw branch, merge of i386 MP branch, and part of autoconf rototil work
Catch up to -current.
avoid from applying IPsec transport mode to the packets when the kernel forwards the packets. sync w/kame
catch up with -current on kqueue branch
catch up with -current.
Catch up to -current.
sync with latest KAME in6_ifaddr/prefix/default router manipulation. behavior changes: - two iocts used by ndp(8) are now obsolete (backward compat provided). use sysctl path instead. - lo0 does not get ::1 automatically. it will get ::1 when lo0 comes up.
typo
'fall through' is not a valid LINT keyword.
Catch up with -current.
attach nd_ifinfo structure into if_afdata. split IPv6 link MTU (advertised by RA) from real link MTU. sync with kame
Apply patch (requested by martti): Fix it so that IPFilter handles IPv6 traffic.
Pull up revision 1.12.2.5 (requested by martti): Updated IPFilter to 3.4.23. (This one re-adds filtering support for forwarded IPv6 packets.)
Sync kqueue branch with -current.
Catch up to -current.
reduce white space/cosmetic diffs w/kame.
Catch up to -current.
add RCSIDs
Sync the thorpej-mips-cache branch with -current.
Revert Darren Reed <darrenr@netbsd.org>'s unauthorized commit to the netbsd-1-5 branch, rev 1.12.2.5 of 2001/10/15 13:19:15. This may re-appear on the branch pending suitable review.
more whitespace sync with kame
Catch up to -current.
unifdef OLDIP6OUTPUT
add ipv6 filtering hooks with pfil_hook for forwarded packet case
Catch up with -current.
update to -current
sync with draft-ietf-ipngwg-p2p-pingpong-00.txt. apply special behavior only if ip6_dst is "neighbor" within p2p prefix. sync with kame
do not forward packet back to point-to-point interface, if the packet matches the ipv6 prefix assigned to the p2p interface (= redirect case). this leads to pingpong, chews bandwidth. bad thing is that bad guy from remote can chew bandwidth. (follows upcoming internet draft)
Catch up to -current.
senderr needs only be declared when PFIL_HOOKS is defined
run pfil_hooks for IPv6 forwarding path (note: ip6_forward() does not call ip6_output()).
Sync with HEAD
Catch up with -current.
enable FAKE_LOOPBACK_IF case by default. now traffic on loopback interface will be presented to bpf as normal wire format packet (without KAME scopeid in s6_addr16[1]). fix KAME PR 250 (host mistakenly accepts packets to fe80::x%lo0). sync with kame.
Sync with HEAD.
to sync with kame better, (1) remove register declaration for variables, (2) sync whitespaces, (3) update comments. (4) bring in some of portability and logging enhancements. no functional changes here.
Update thorpej_scsipi to -current as of a month ago
pullup (approved by releng-1-5) do not try to look up port number on forwarding case. sys/netinet6/ip6_forward.c 1.16 -> 1.17
on ipsec policy lookup, do not try to lookup port numbers for forwarded packet. sync with kame.
pullup 1.15 -> 1.16 (aproved by releng-1-5) > do not forward packet with :: in the source. > this is not in the spec - we had rough consensus on it in ipngwg, > spec will get updated to include this behavior.
do not forward packet with :: in the source. this is not in the spec - we had rough consensus on it in ipngwg, spec will get updated to include this behavior.
pullup 1.13 -> 1.15 (approved by releng-1-5) 1.14 -> 1.15 s/IPSEC_IPV6FWD/IPSEC/. this should correct strange behavior on ipv6 forwarding (even if policy asks for tunnel mode encryption, packets go out in clear). sync with kame. 1.13 -> 1.14 date: 2000/07/06 12:51:41; author: itojun; state: Exp; lines: +2 -3 remove unnecessary #include <netkey/key_debug.h>. from kame.
s/IPSEC_IPV6FWD/IPSEC/. this should correct strange behavior on ipv6 forwarding (even if policy asks for tunnel mode encryption, packets go out in clear). sync with kame.
remove unnecessary #include <netkey/key_debug.h>. from kame.
mrege 1.12 -> 1.13: (approved by: releng-1-5) suppress too noisy warning on forward-over-loopback case. from kame
suppress too noisy warning on forward-over-loopback case. from kame
Sync w/ netbsd-1-5-base.
sync with kame. - use latest source address selection code - in6_src.c. - correct frag header insertion. - deep copy ip6 header portion in ip6_mloopback to avoid overwrite. - do not bark when we forward packet to loopback. - some cosmetics.
correct manipulation of link-local scoped address on loopback. now "telnet fe80::1%lo0" should work again. (we have another bug near here - will attack it soon)
do not mistakingly forward link-local scoped packet (the bug was added with "beyondscope" icmp6 support). "options FAKE_LOOPBACK_IF" will honor scope on loopback outputs. rcvif will be real interface, not the loopback, just like when multicast loopback. (sync with kame)
bring in recent KAME changes (only important and stable ones, as usual). - remove net.inet6.ip6.nd6_proxyall. introduce proxy NDP code works just like "arp -s". - revise source address selection. be more careful about use of yet-to-be-valid addresses as source. - as router, transmit ICMP6_DST_UNREACH_BEYONDSCOPE against out-of-scope packet forwarding attempt. - path MTU discovery takes care of routing header properly. - be more strict about mbuf chain parsing.
fix include pathname for better rfc2292 compliance.
bring in latest KAME ipsec tree. - interop issues in ipcomp is fixed - padding type (after ESP) is configurable - key database memory management (need more fixes) - policy specification is revisited XXX m->m_pkthdr.rcvif is still overloaded - hope to fix it soon
remove extra portability #ifdef (like #ifdef __FreeBSD__) in KAME IPv6/IPsec code, from netbsd-current repository. #ifdef'ed version is always available from ftp.kame.net. XXX please do not make too many diff-unfriendly changes, we'll need to take bunch of diffs on upgrade...
Pull up to last week's -current.
sync IPv6 part with latest KAME tree. IPsec part is left unmodified due to massive changes in KAME side. - IPv6 output goes through nd6_output - faith can capture IPv4 packets as well - you can run IPv4-to-IPv6 translator using heavily modified DNS servers - per-interface statistics (required for IPv6 MIB) - interface autoconfig is revisited - udp input handling has a big change for mapped address support. - introduce in4_cksum() for non-overwriting checksumming - introduce m_pulldown() - neighbor discovery cleanups/improvements - netinet/in.h strictly conforms to RFC2553 (no extra defs visible to userland) - IFA_STATS is fixed a bit (not tested) - and more more more. TODO: - cleanup os-independency #ifdef - avoid rcvif dual use (for IPsec) to help ifdetach (sorry for jumbo commit, I can't separate this any more...)
bring in latest KAME (as of 19991130, KAME/NetBSD141) into kame branch just for reference purposes. This commit includes 1.4 -> 1.4.1 sync for kame branch. The branch does not compile at all (due to the lack of ALTQ and some other source code). Please do not try to modify the branch, this is just for referenre purposes. synchronization to latest KAME will take place on HEAD branch soon.
Update from trunk.
remove reference to in6_systm.h (file itself will be removed afterwords)
RCS ID police.
Sync w/ -current.
file ip6_forward.c was added on branch chs-ubc2 on 1999-07-01 23:48:28 +0000
IPv6 kernel code, based on KAME/NetBSD 1.4, SNAP kit 19990628.
(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.
- sys/kern: do not assume single mbuf, accept chained mbuf on passing
data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen
In my understanding no code here is subject to export control so it
should be safe.
KAME/NetBSD 1.4 SNAP kit, dated 19990628. NOTE: this branch (kame) is used just for refernce. this may not compile due to multiple reasons.
file ip6_forward.c was initially added on branch kame.