Annotation of src/sys/dev/raidframe/rf_diskqueue.c, revision 1.13
1.13 ! oster 1: /* $NetBSD: rf_diskqueue.c,v 1.12 2000/03/04 03:27:13 oster Exp $ */
1.1 oster 2: /*
3: * Copyright (c) 1995 Carnegie-Mellon University.
4: * All rights reserved.
5: *
6: * Author: Mark Holland
7: *
8: * Permission to use, copy, modify and distribute this software and
9: * its documentation is hereby granted, provided that both the copyright
10: * notice and this permission notice appear in all copies of the
11: * software, derivative works or modified versions, and any portions
12: * thereof, and that both notices appear in supporting documentation.
13: *
14: * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
15: * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
16: * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
17: *
18: * Carnegie Mellon requests users of this software to return to
19: *
20: * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
21: * School of Computer Science
22: * Carnegie Mellon University
23: * Pittsburgh PA 15213-3890
24: *
25: * any improvements or extensions that they make and grant Carnegie the
26: * rights to redistribute these changes.
27: */
28:
1.13 ! oster 29: /****************************************************************************
1.1 oster 30: *
31: * rf_diskqueue.c -- higher-level disk queue code
32: *
33: * the routines here are a generic wrapper around the actual queueing
1.6 oster 34: * routines. The code here implements thread scheduling, synchronization,
1.1 oster 35: * and locking ops (see below) on top of the lower-level queueing code.
36: *
1.13 ! oster 37: * to support atomic RMW, we implement "locking operations". When a
! 38: * locking op is dispatched to the lower levels of the driver, the
! 39: * queue is locked, and no further I/Os are dispatched until the queue
! 40: * receives & completes a corresponding "unlocking operation". This
! 41: * code relies on the higher layers to guarantee that a locking op
! 42: * will always be eventually followed by an unlocking op. The model
! 43: * is that the higher layers are structured so locking and unlocking
! 44: * ops occur in pairs, i.e. an unlocking op cannot be generated until
! 45: * after a locking op reports completion. There is no good way to
! 46: * check to see that an unlocking op "corresponds" to the op that
! 47: * currently has the queue locked, so we make no such attempt. Since
! 48: * by definition there can be only one locking op outstanding on a
! 49: * disk, this should not be a problem.
! 50: *
! 51: * In the kernel, we allow multiple I/Os to be concurrently dispatched
! 52: * to the disk driver. In order to support locking ops in this
! 53: * environment, when we decide to do a locking op, we stop dispatching
! 54: * new I/Os and wait until all dispatched I/Os have completed before
! 55: * dispatching the locking op.
! 56: *
! 57: * Unfortunately, the code is different in the 3 different operating
! 58: * states (user level, kernel, simulator). In the kernel, I/O is
! 59: * non-blocking, and we have no disk threads to dispatch for us.
! 60: * Therefore, we have to dispatch new I/Os to the scsi driver at the
! 61: * time of enqueue, and also at the time of completion. At user
! 62: * level, I/O is blocking, and so only the disk threads may dispatch
! 63: * I/Os. Thus at user level, all we can do at enqueue time is enqueue
! 64: * and wake up the disk thread to do the dispatch.
1.1 oster 65: *
1.13 ! oster 66: ****************************************************************************/
1.1 oster 67:
68: #include "rf_types.h"
69: #include "rf_threadstuff.h"
70: #include "rf_raid.h"
71: #include "rf_diskqueue.h"
72: #include "rf_alloclist.h"
73: #include "rf_acctrace.h"
74: #include "rf_etimer.h"
75: #include "rf_configure.h"
76: #include "rf_general.h"
77: #include "rf_freelist.h"
78: #include "rf_debugprint.h"
79: #include "rf_shutdown.h"
80: #include "rf_cvscan.h"
81: #include "rf_sstf.h"
82: #include "rf_fifo.h"
1.11 oster 83: #include "rf_kintf.h"
1.1 oster 84:
85: static int init_dqd(RF_DiskQueueData_t *);
86: static void clean_dqd(RF_DiskQueueData_t *);
87: static void rf_ShutdownDiskQueueSystem(void *);
88:
89: #define Dprintf1(s,a) if (rf_queueDebug) rf_debug_printf(s,(void *)((unsigned long)a),NULL,NULL,NULL,NULL,NULL,NULL,NULL)
90: #define Dprintf2(s,a,b) if (rf_queueDebug) rf_debug_printf(s,(void *)((unsigned long)a),(void *)((unsigned long)b),NULL,NULL,NULL,NULL,NULL,NULL)
91: #define Dprintf3(s,a,b,c) if (rf_queueDebug) rf_debug_printf(s,(void *)((unsigned long)a),(void *)((unsigned long)b),(void *)((unsigned long)c),NULL,NULL,NULL,NULL,NULL)
92:
1.13 ! oster 93: /*****************************************************************************
1.1 oster 94: *
1.13 ! oster 95: * the disk queue switch defines all the functions used in the
! 96: * different queueing disciplines queue ID, init routine, enqueue
! 97: * routine, dequeue routine
1.1 oster 98: *
1.13 ! oster 99: ****************************************************************************/
1.1 oster 100:
101: static RF_DiskQueueSW_t diskqueuesw[] = {
1.6 oster 102: {"fifo", /* FIFO */
103: rf_FifoCreate,
104: rf_FifoEnqueue,
105: rf_FifoDequeue,
106: rf_FifoPeek,
1.1 oster 107: rf_FifoPromote},
108:
1.6 oster 109: {"cvscan", /* cvscan */
110: rf_CvscanCreate,
111: rf_CvscanEnqueue,
112: rf_CvscanDequeue,
113: rf_CvscanPeek,
114: rf_CvscanPromote},
115:
116: {"sstf", /* shortest seek time first */
117: rf_SstfCreate,
118: rf_SstfEnqueue,
119: rf_SstfDequeue,
120: rf_SstfPeek,
1.1 oster 121: rf_SstfPromote},
122:
1.6 oster 123: {"scan", /* SCAN (two-way elevator) */
124: rf_ScanCreate,
125: rf_SstfEnqueue,
126: rf_ScanDequeue,
127: rf_ScanPeek,
1.1 oster 128: rf_SstfPromote},
129:
1.6 oster 130: {"cscan", /* CSCAN (one-way elevator) */
131: rf_CscanCreate,
132: rf_SstfEnqueue,
133: rf_CscanDequeue,
134: rf_CscanPeek,
1.1 oster 135: rf_SstfPromote},
136:
137: };
138: #define NUM_DISK_QUEUE_TYPES (sizeof(diskqueuesw)/sizeof(RF_DiskQueueSW_t))
139:
140: static RF_FreeList_t *rf_dqd_freelist;
141:
142: #define RF_MAX_FREE_DQD 256
143: #define RF_DQD_INC 16
144: #define RF_DQD_INITIAL 64
145:
146: #include <sys/buf.h>
147:
1.6 oster 148: static int
149: init_dqd(dqd)
150: RF_DiskQueueData_t *dqd;
151: {
1.13 ! oster 152:
1.9 oster 153: dqd->bp = (struct buf *) malloc(sizeof(struct buf),
154: M_RAIDFRAME, M_NOWAIT);
1.1 oster 155: if (dqd->bp == NULL) {
1.6 oster 156: return (ENOMEM);
1.1 oster 157: }
1.6 oster 158: memset(dqd->bp, 0, sizeof(struct buf)); /* if you don't do it, nobody
159: * else will.. */
160: return (0);
1.1 oster 161: }
162:
1.6 oster 163: static void
164: clean_dqd(dqd)
165: RF_DiskQueueData_t *dqd;
1.1 oster 166: {
1.6 oster 167: free(dqd->bp, M_RAIDFRAME);
168: }
169: /* configures a single disk queue */
1.9 oster 170:
1.7 oster 171: int
1.9 oster 172: rf_ConfigureDiskQueue(
173: RF_Raid_t * raidPtr,
174: RF_DiskQueue_t * diskqueue,
175: RF_RowCol_t r, /* row & col -- debug only. BZZT not any
1.6 oster 176: * more... */
1.9 oster 177: RF_RowCol_t c,
178: RF_DiskQueueSW_t * p,
179: RF_SectorCount_t sectPerDisk,
180: dev_t dev,
181: int maxOutstanding,
182: RF_ShutdownList_t ** listp,
183: RF_AllocListElem_t * clList)
1.6 oster 184: {
185: int rc;
186:
187: diskqueue->row = r;
188: diskqueue->col = c;
189: diskqueue->qPtr = p;
190: diskqueue->qHdr = (p->Create) (sectPerDisk, clList, listp);
191: diskqueue->dev = dev;
192: diskqueue->numOutstanding = 0;
193: diskqueue->queueLength = 0;
194: diskqueue->maxOutstanding = maxOutstanding;
195: diskqueue->curPriority = RF_IO_NORMAL_PRIORITY;
196: diskqueue->nextLockingOp = NULL;
197: diskqueue->unlockingOp = NULL;
198: diskqueue->numWaiting = 0;
199: diskqueue->flags = 0;
200: diskqueue->raidPtr = raidPtr;
201: diskqueue->rf_cinfo = &raidPtr->raid_cinfo[r][c];
202: rc = rf_create_managed_mutex(listp, &diskqueue->mutex);
203: if (rc) {
204: RF_ERRORMSG3("Unable to init mutex file %s line %d rc=%d\n", __FILE__,
205: __LINE__, rc);
206: return (rc);
207: }
208: rc = rf_create_managed_cond(listp, &diskqueue->cond);
209: if (rc) {
210: RF_ERRORMSG3("Unable to init cond file %s line %d rc=%d\n", __FILE__,
211: __LINE__, rc);
212: return (rc);
213: }
214: return (0);
1.1 oster 215: }
216:
1.6 oster 217: static void
218: rf_ShutdownDiskQueueSystem(ignored)
219: void *ignored;
220: {
221: RF_FREELIST_DESTROY_CLEAN(rf_dqd_freelist, next, (RF_DiskQueueData_t *), clean_dqd);
1.1 oster 222: }
223:
1.6 oster 224: int
225: rf_ConfigureDiskQueueSystem(listp)
226: RF_ShutdownList_t **listp;
227: {
228: int rc;
229:
230: RF_FREELIST_CREATE(rf_dqd_freelist, RF_MAX_FREE_DQD,
231: RF_DQD_INC, sizeof(RF_DiskQueueData_t));
232: if (rf_dqd_freelist == NULL)
233: return (ENOMEM);
234: rc = rf_ShutdownCreate(listp, rf_ShutdownDiskQueueSystem, NULL);
235: if (rc) {
236: RF_ERRORMSG3("Unable to add to shutdown list file %s line %d rc=%d\n",
237: __FILE__, __LINE__, rc);
238: rf_ShutdownDiskQueueSystem(NULL);
239: return (rc);
240: }
241: RF_FREELIST_PRIME_INIT(rf_dqd_freelist, RF_DQD_INITIAL, next,
242: (RF_DiskQueueData_t *), init_dqd);
243: return (0);
244: }
245:
246: int
247: rf_ConfigureDiskQueues(
248: RF_ShutdownList_t ** listp,
249: RF_Raid_t * raidPtr,
250: RF_Config_t * cfgPtr)
251: {
252: RF_DiskQueue_t **diskQueues, *spareQueues;
253: RF_DiskQueueSW_t *p;
254: RF_RowCol_t r, c;
255: int rc, i;
256:
257: raidPtr->maxQueueDepth = cfgPtr->maxOutstandingDiskReqs;
258:
259: for (p = NULL, i = 0; i < NUM_DISK_QUEUE_TYPES; i++) {
260: if (!strcmp(diskqueuesw[i].queueType, cfgPtr->diskQueueType)) {
261: p = &diskqueuesw[i];
262: break;
263: }
264: }
265: if (p == NULL) {
266: RF_ERRORMSG2("Unknown queue type \"%s\". Using %s\n", cfgPtr->diskQueueType, diskqueuesw[0].queueType);
267: p = &diskqueuesw[0];
268: }
1.10 oster 269: raidPtr->qType = p;
1.6 oster 270: RF_CallocAndAdd(diskQueues, raidPtr->numRow, sizeof(RF_DiskQueue_t *), (RF_DiskQueue_t **), raidPtr->cleanupList);
271: if (diskQueues == NULL) {
272: return (ENOMEM);
273: }
274: raidPtr->Queues = diskQueues;
275: for (r = 0; r < raidPtr->numRow; r++) {
1.7 oster 276: RF_CallocAndAdd(diskQueues[r], raidPtr->numCol +
277: ((r == 0) ? RF_MAXSPARE : 0),
278: sizeof(RF_DiskQueue_t), (RF_DiskQueue_t *),
279: raidPtr->cleanupList);
1.6 oster 280: if (diskQueues[r] == NULL)
281: return (ENOMEM);
282: for (c = 0; c < raidPtr->numCol; c++) {
1.9 oster 283: rc = rf_ConfigureDiskQueue(raidPtr, &diskQueues[r][c],
284: r, c, p,
285: raidPtr->sectorsPerDisk,
286: raidPtr->Disks[r][c].dev,
287: cfgPtr->maxOutstandingDiskReqs,
288: listp, raidPtr->cleanupList);
1.6 oster 289: if (rc)
290: return (rc);
291: }
292: }
293:
294: spareQueues = &raidPtr->Queues[0][raidPtr->numCol];
295: for (r = 0; r < raidPtr->numSpare; r++) {
1.9 oster 296: rc = rf_ConfigureDiskQueue(raidPtr, &spareQueues[r],
1.6 oster 297: 0, raidPtr->numCol + r, p,
298: raidPtr->sectorsPerDisk,
299: raidPtr->Disks[0][raidPtr->numCol + r].dev,
300: cfgPtr->maxOutstandingDiskReqs, listp,
301: raidPtr->cleanupList);
302: if (rc)
303: return (rc);
304: }
305: return (0);
306: }
1.1 oster 307: /* Enqueue a disk I/O
308: *
309: * Unfortunately, we have to do things differently in the different
310: * environments (simulator, user-level, kernel).
311: * At user level, all I/O is blocking, so we have 1 or more threads/disk
312: * and the thread that enqueues is different from the thread that dequeues.
313: * In the kernel, I/O is non-blocking and so we'd like to have multiple
314: * I/Os outstanding on the physical disks when possible.
315: *
316: * when any request arrives at a queue, we have two choices:
317: * dispatch it to the lower levels
318: * queue it up
319: *
320: * kernel rules for when to do what:
321: * locking request: queue empty => dispatch and lock queue,
322: * else queue it
323: * unlocking req : always dispatch it
324: * normal req : queue empty => dispatch it & set priority
325: * queue not full & priority is ok => dispatch it
326: * else queue it
327: *
328: * user-level rules:
329: * always enqueue. In the special case of an unlocking op, enqueue
330: * in a special way that will cause the unlocking op to be the next
331: * thing dequeued.
332: *
333: * simulator rules:
334: * Do the same as at user level, with the sleeps and wakeups suppressed.
335: */
1.6 oster 336: void
337: rf_DiskIOEnqueue(queue, req, pri)
338: RF_DiskQueue_t *queue;
339: RF_DiskQueueData_t *req;
340: int pri;
341: {
342: RF_ETIMER_START(req->qtime);
343: RF_ASSERT(req->type == RF_IO_TYPE_NOP || req->numSector);
344: req->priority = pri;
345:
346: if (rf_queueDebug && (req->numSector == 0)) {
347: printf("Warning: Enqueueing zero-sector access\n");
348: }
349: /*
350: * kernel
351: */
352: RF_LOCK_QUEUE_MUTEX(queue, "DiskIOEnqueue");
353: /* locking request */
354: if (RF_LOCKING_REQ(req)) {
355: if (RF_QUEUE_EMPTY(queue)) {
356: Dprintf3("Dispatching pri %d locking op to r %d c %d (queue empty)\n", pri, queue->row, queue->col);
357: RF_LOCK_QUEUE(queue);
358: rf_DispatchKernelIO(queue, req);
359: } else {
360: queue->queueLength++; /* increment count of number
361: * of requests waiting in this
362: * queue */
363: Dprintf3("Enqueueing pri %d locking op to r %d c %d (queue not empty)\n", pri, queue->row, queue->col);
364: req->queue = (void *) queue;
365: (queue->qPtr->Enqueue) (queue->qHdr, req, pri);
366: }
367: }
368: /* unlocking request */
369: else
370: if (RF_UNLOCKING_REQ(req)) { /* we'll do the actual unlock
371: * when this I/O completes */
372: Dprintf3("Dispatching pri %d unlocking op to r %d c %d\n", pri, queue->row, queue->col);
373: RF_ASSERT(RF_QUEUE_LOCKED(queue));
374: rf_DispatchKernelIO(queue, req);
375: }
376: /* normal request */
377: else
378: if (RF_OK_TO_DISPATCH(queue, req)) {
379: Dprintf3("Dispatching pri %d regular op to r %d c %d (ok to dispatch)\n", pri, queue->row, queue->col);
380: rf_DispatchKernelIO(queue, req);
381: } else {
382: queue->queueLength++; /* increment count of
383: * number of requests
384: * waiting in this queue */
385: Dprintf3("Enqueueing pri %d regular op to r %d c %d (not ok to dispatch)\n", pri, queue->row, queue->col);
386: req->queue = (void *) queue;
387: (queue->qPtr->Enqueue) (queue->qHdr, req, pri);
388: }
389: RF_UNLOCK_QUEUE_MUTEX(queue, "DiskIOEnqueue");
1.1 oster 390: }
1.6 oster 391:
1.1 oster 392:
393: /* get the next set of I/Os started, kernel version only */
1.6 oster 394: void
395: rf_DiskIOComplete(queue, req, status)
396: RF_DiskQueue_t *queue;
397: RF_DiskQueueData_t *req;
398: int status;
399: {
400: int done = 0;
401:
402: RF_LOCK_QUEUE_MUTEX(queue, "DiskIOComplete");
403:
404: /* unlock the queue: (1) after an unlocking req completes (2) after a
405: * locking req fails */
406: if (RF_UNLOCKING_REQ(req) || (RF_LOCKING_REQ(req) && status)) {
407: Dprintf2("DiskIOComplete: unlocking queue at r %d c %d\n", queue->row, queue->col);
408: RF_ASSERT(RF_QUEUE_LOCKED(queue) && (queue->unlockingOp == NULL));
409: RF_UNLOCK_QUEUE(queue);
410: }
411: queue->numOutstanding--;
412: RF_ASSERT(queue->numOutstanding >= 0);
413:
414: /* dispatch requests to the disk until we find one that we can't. */
415: /* no reason to continue once we've filled up the queue */
416: /* no reason to even start if the queue is locked */
417:
418: while (!done && !RF_QUEUE_FULL(queue) && !RF_QUEUE_LOCKED(queue)) {
419: if (queue->nextLockingOp) {
420: req = queue->nextLockingOp;
421: queue->nextLockingOp = NULL;
422: Dprintf3("DiskIOComplete: a pri %d locking req was pending at r %d c %d\n", req->priority, queue->row, queue->col);
423: } else {
424: req = (queue->qPtr->Dequeue) (queue->qHdr);
425: if (req != NULL) {
426: Dprintf3("DiskIOComplete: extracting pri %d req from queue at r %d c %d\n", req->priority, queue->row, queue->col);
427: } else {
428: Dprintf1("DiskIOComplete: no more requests to extract.\n", "");
429: }
430: }
431: if (req) {
432: queue->queueLength--; /* decrement count of number
433: * of requests waiting in this
434: * queue */
435: RF_ASSERT(queue->queueLength >= 0);
436: }
437: if (!req)
438: done = 1;
439: else
440: if (RF_LOCKING_REQ(req)) {
441: if (RF_QUEUE_EMPTY(queue)) { /* dispatch it */
442: Dprintf3("DiskIOComplete: dispatching pri %d locking req to r %d c %d (queue empty)\n", req->priority, queue->row, queue->col);
443: RF_LOCK_QUEUE(queue);
444: rf_DispatchKernelIO(queue, req);
445: done = 1;
446: } else { /* put it aside to wait for
447: * the queue to drain */
448: Dprintf3("DiskIOComplete: postponing pri %d locking req to r %d c %d\n", req->priority, queue->row, queue->col);
449: RF_ASSERT(queue->nextLockingOp == NULL);
450: queue->nextLockingOp = req;
451: done = 1;
452: }
453: } else
454: if (RF_UNLOCKING_REQ(req)) { /* should not happen:
455: * unlocking ops should
456: * not get queued */
457: RF_ASSERT(RF_QUEUE_LOCKED(queue)); /* support it anyway for
458: * the future */
459: Dprintf3("DiskIOComplete: dispatching pri %d unl req to r %d c %d (SHOULD NOT SEE THIS)\n", req->priority, queue->row, queue->col);
460: rf_DispatchKernelIO(queue, req);
461: done = 1;
462: } else
463: if (RF_OK_TO_DISPATCH(queue, req)) {
464: Dprintf3("DiskIOComplete: dispatching pri %d regular req to r %d c %d (ok to dispatch)\n", req->priority, queue->row, queue->col);
465: rf_DispatchKernelIO(queue, req);
466: } else { /* we can't dispatch it,
467: * so just re-enqueue
468: * it. */
469: /* potential trouble here if
470: * disk queues batch reqs */
471: Dprintf3("DiskIOComplete: re-enqueueing pri %d regular req to r %d c %d\n", req->priority, queue->row, queue->col);
472: queue->queueLength++;
473: (queue->qPtr->Enqueue) (queue->qHdr, req, req->priority);
474: done = 1;
475: }
476: }
477:
478: RF_UNLOCK_QUEUE_MUTEX(queue, "DiskIOComplete");
1.1 oster 479: }
480: /* promotes accesses tagged with the given parityStripeID from low priority
481: * to normal priority. This promotion is optional, meaning that a queue
482: * need not implement it. If there is no promotion routine associated with
483: * a queue, this routine does nothing and returns -1.
484: */
1.6 oster 485: int
486: rf_DiskIOPromote(queue, parityStripeID, which_ru)
487: RF_DiskQueue_t *queue;
488: RF_StripeNum_t parityStripeID;
489: RF_ReconUnitNum_t which_ru;
490: {
491: int retval;
492:
493: if (!queue->qPtr->Promote)
494: return (-1);
495: RF_LOCK_QUEUE_MUTEX(queue, "DiskIOPromote");
496: retval = (queue->qPtr->Promote) (queue->qHdr, parityStripeID, which_ru);
497: RF_UNLOCK_QUEUE_MUTEX(queue, "DiskIOPromote");
498: return (retval);
499: }
500:
501: RF_DiskQueueData_t *
502: rf_CreateDiskQueueData(
503: RF_IoType_t typ,
504: RF_SectorNum_t ssect,
505: RF_SectorCount_t nsect,
506: caddr_t buf,
507: RF_StripeNum_t parityStripeID,
508: RF_ReconUnitNum_t which_ru,
509: int (*wakeF) (void *, int),
510: void *arg,
511: RF_DiskQueueData_t * next,
512: RF_AccTraceEntry_t * tracerec,
513: void *raidPtr,
514: RF_DiskQueueDataFlags_t flags,
515: void *kb_proc)
516: {
517: RF_DiskQueueData_t *p;
518:
519: RF_FREELIST_GET_INIT(rf_dqd_freelist, p, next, (RF_DiskQueueData_t *), init_dqd);
520:
521: p->sectorOffset = ssect + rf_protectedSectors;
522: p->numSector = nsect;
523: p->type = typ;
524: p->buf = buf;
525: p->parityStripeID = parityStripeID;
526: p->which_ru = which_ru;
527: p->CompleteFunc = wakeF;
528: p->argument = arg;
529: p->next = next;
530: p->tracerec = tracerec;
531: p->priority = RF_IO_NORMAL_PRIORITY;
532: p->AuxFunc = NULL;
533: p->buf2 = NULL;
534: p->raidPtr = raidPtr;
535: p->flags = flags;
536: p->b_proc = kb_proc;
537: return (p);
538: }
539:
540: RF_DiskQueueData_t *
541: rf_CreateDiskQueueDataFull(
542: RF_IoType_t typ,
543: RF_SectorNum_t ssect,
544: RF_SectorCount_t nsect,
545: caddr_t buf,
546: RF_StripeNum_t parityStripeID,
547: RF_ReconUnitNum_t which_ru,
548: int (*wakeF) (void *, int),
549: void *arg,
550: RF_DiskQueueData_t * next,
551: RF_AccTraceEntry_t * tracerec,
552: int priority,
553: int (*AuxFunc) (void *,...),
554: caddr_t buf2,
555: void *raidPtr,
556: RF_DiskQueueDataFlags_t flags,
557: void *kb_proc)
558: {
559: RF_DiskQueueData_t *p;
560:
561: RF_FREELIST_GET_INIT(rf_dqd_freelist, p, next, (RF_DiskQueueData_t *), init_dqd);
562:
563: p->sectorOffset = ssect + rf_protectedSectors;
564: p->numSector = nsect;
565: p->type = typ;
566: p->buf = buf;
567: p->parityStripeID = parityStripeID;
568: p->which_ru = which_ru;
569: p->CompleteFunc = wakeF;
570: p->argument = arg;
571: p->next = next;
572: p->tracerec = tracerec;
573: p->priority = priority;
574: p->AuxFunc = AuxFunc;
575: p->buf2 = buf2;
576: p->raidPtr = raidPtr;
577: p->flags = flags;
578: p->b_proc = kb_proc;
579: return (p);
580: }
581:
582: void
583: rf_FreeDiskQueueData(p)
584: RF_DiskQueueData_t *p;
1.1 oster 585: {
1.6 oster 586: RF_FREELIST_FREE_CLEAN(rf_dqd_freelist, p, next, clean_dqd);
1.1 oster 587: }
CVSweb <webmaster@jp.NetBSD.org>