Annotation of src/sys/dev/raidframe/raidframevar.h, revision 1.3.2.2
1.3.2.1 skrll 1: /* $NetBSD: raidframevar.h,v 1.7 2004/06/02 22:58:28 drochner Exp $ */
1.1 oster 2: /*-
3: * Copyright (c) 1996, 1997, 1998 The NetBSD Foundation, Inc.
4: * All rights reserved.
5: *
6: * This code is derived from software contributed to The NetBSD Foundation
7: * by Greg Oster
8: *
9: * Redistribution and use in source and binary forms, with or without
10: * modification, are permitted provided that the following conditions
11: * are met:
12: * 1. Redistributions of source code must retain the above copyright
13: * notice, this list of conditions and the following disclaimer.
14: * 2. Redistributions in binary form must reproduce the above copyright
15: * notice, this list of conditions and the following disclaimer in the
16: * documentation and/or other materials provided with the distribution.
17: * 3. All advertising materials mentioning features or use of this software
18: * must display the following acknowledgement:
19: * This product includes software developed by the NetBSD
20: * Foundation, Inc. and its contributors.
21: * 4. Neither the name of The NetBSD Foundation nor the names of its
22: * contributors may be used to endorse or promote products derived
23: * from this software without specific prior written permission.
24: *
25: * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
26: * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
27: * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28: * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
29: * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
30: * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
31: * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
32: * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
33: * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
34: * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
35: * POSSIBILITY OF SUCH DAMAGE.
36: */
37: /*
38: * Copyright (c) 1995 Carnegie-Mellon University.
39: * All rights reserved.
40: *
41: * Author: Mark Holland
42: *
43: * Permission to use, copy, modify and distribute this software and
44: * its documentation is hereby granted, provided that both the copyright
45: * notice and this permission notice appear in all copies of the
46: * software, derivative works or modified versions, and any portions
47: * thereof, and that both notices appear in supporting documentation.
48: *
49: * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
50: * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
51: * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
52: *
53: * Carnegie Mellon requests users of this software to return to
54: *
55: * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
56: * School of Computer Science
57: * Carnegie Mellon University
58: * Pittsburgh PA 15213-3890
59: *
60: * any improvements or extensions that they make and grant Carnegie the
61: * rights to redistribute these changes.
62: */
63:
64: /*
65: * Copyright (c) 1995 Carnegie-Mellon University.
66: * All rights reserved.
67: *
68: * Author: Jim Zelenka
69: *
70: * Permission to use, copy, modify and distribute this software and
71: * its documentation is hereby granted, provided that both the copyright
72: * notice and this permission notice appear in all copies of the
73: * software, derivative works or modified versions, and any portions
74: * thereof, and that both notices appear in supporting documentation.
75: *
76: * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
77: * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
78: * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
79: *
80: * Carnegie Mellon requests users of this software to return to
81: *
82: * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
83: * School of Computer Science
84: * Carnegie Mellon University
85: * Pittsburgh PA 15213-3890
86: *
87: * any improvements or extensions that they make and grant Carnegie the
88: * rights to redistribute these changes.
89: */
90:
91: /*****************************************************
92: *
93: * raidframevar.h
94: *
95: * main header file for using raidframe in the kernel.
96: *
97: *****************************************************/
98:
99:
100: #ifndef _RF_RAIDFRAMEVAR_H_
101: #define _RF_RAIDFRAMEVAR_H_
102:
1.3.2.1 skrll 103: #ifndef _STANDALONE
1.1 oster 104: #include <sys/ioctl.h>
105:
106: #include <sys/errno.h>
107: #include <sys/types.h>
108:
109: #include <sys/uio.h>
110: #include <sys/param.h>
111: #include <sys/proc.h>
112: #include <sys/lock.h>
113:
1.2 thorpej 114: #include <sys/mallocvar.h>
1.3.2.1 skrll 115: #endif
1.2 thorpej 116:
1.1 oster 117: /*
118: * First, define system-dependent types and constants.
119: *
120: * If the machine is big-endian, RF_BIG_ENDIAN should be 1.
121: * Otherwise, it should be 0.
122: *
123: * The various integer types should be self-explanatory; we
124: * use these elsewhere to avoid size confusion.
125: *
126: * LONGSHIFT is lg(sizeof(long)) (that is, log base two of sizeof(long)
127: *
128: */
129:
130: #include <sys/types.h>
131: #include <machine/endian.h>
132: #include <machine/limits.h>
133:
134: #if BYTE_ORDER == BIG_ENDIAN
135: #define RF_IS_BIG_ENDIAN 1
136: #elif BYTE_ORDER == LITTLE_ENDIAN
137: #define RF_IS_BIG_ENDIAN 0
138: #else
139: #error byte order not defined
140: #endif
141: typedef int8_t RF_int8;
142: typedef u_int8_t RF_uint8;
143: typedef int16_t RF_int16;
144: typedef u_int16_t RF_uint16;
145: typedef int32_t RF_int32;
146: typedef u_int32_t RF_uint32;
147: typedef int64_t RF_int64;
148: typedef u_int64_t RF_uint64;
149: #if LONG_BIT == 32
150: #define RF_LONGSHIFT 2
151: #elif LONG_BIT == 64
152: #define RF_LONGSHIFT 3
153: #else
154: #error word size not defined
155: #endif
156:
157: /*
158: * These are just zero and non-zero. We don't use "TRUE"
159: * and "FALSE" because there's too much nonsense trying
160: * to get them defined exactly once on every platform, given
161: * the different places they may be defined in system header
162: * files.
163: */
164: #define RF_TRUE 1
165: #define RF_FALSE 0
1.2 thorpej 166:
167: /* Malloc types. */
1.3 tron 168: #ifdef _KERNEL
1.2 thorpej 169: MALLOC_DECLARE(M_RAIDFRAME);
1.3 tron 170: #endif
1.1 oster 171:
172: /*
173: * Now, some generic types
174: */
175: typedef RF_uint64 RF_IoCount_t;
176: typedef RF_uint64 RF_Offset_t;
177: typedef RF_uint32 RF_PSSFlags_t;
178: typedef RF_uint64 RF_SectorCount_t;
179: typedef RF_uint64 RF_StripeCount_t;
180: typedef RF_int64 RF_SectorNum_t;/* these are unsigned so we can set them to
181: * (-1) for "uninitialized" */
182: typedef RF_int64 RF_StripeNum_t;
183: typedef RF_int64 RF_RaidAddr_t;
184: typedef int RF_RowCol_t; /* unsigned so it can be (-1) */
185: typedef RF_int64 RF_HeadSepLimit_t;
186: typedef RF_int64 RF_ReconUnitCount_t;
187: typedef int RF_ReconUnitNum_t;
188:
189: typedef char RF_ParityConfig_t;
190:
191: typedef char RF_DiskQueueType_t[1024];
192: #define RF_DISK_QUEUE_TYPE_NONE ""
193:
194: /* values for the 'type' field in a reconstruction buffer */
195: typedef int RF_RbufType_t;
196: #define RF_RBUF_TYPE_EXCLUSIVE 0 /* this buf assigned exclusively to
197: * one disk */
198: #define RF_RBUF_TYPE_FLOATING 1 /* this is a floating recon buf */
199: #define RF_RBUF_TYPE_FORCED 2 /* this rbuf was allocated to complete
200: * a forced recon */
201:
202: typedef char RF_IoType_t;
203: #define RF_IO_TYPE_READ 'r'
204: #define RF_IO_TYPE_WRITE 'w'
205: #define RF_IO_TYPE_NOP 'n'
206: #define RF_IO_IS_R_OR_W(_type_) (((_type_) == RF_IO_TYPE_READ) \
207: || ((_type_) == RF_IO_TYPE_WRITE))
208:
209: typedef void (*RF_VoidFuncPtr) (void *,...);
210:
211: typedef RF_uint32 RF_AccessStripeMapFlags_t;
212: typedef RF_uint32 RF_DiskQueueDataFlags_t;
213: typedef RF_uint32 RF_DiskQueueFlags_t;
214: typedef RF_uint32 RF_RaidAccessFlags_t;
215:
216: #define RF_DISKQUEUE_DATA_FLAGS_NONE ((RF_DiskQueueDataFlags_t)0)
217:
218: typedef struct RF_AccessStripeMap_s RF_AccessStripeMap_t;
219: typedef struct RF_AccessStripeMapHeader_s RF_AccessStripeMapHeader_t;
220: typedef struct RF_AllocListElem_s RF_AllocListElem_t;
221: typedef struct RF_CallbackDesc_s RF_CallbackDesc_t;
222: typedef struct RF_ChunkDesc_s RF_ChunkDesc_t;
223: typedef struct RF_CommonLogData_s RF_CommonLogData_t;
224: typedef struct RF_Config_s RF_Config_t;
225: typedef struct RF_CumulativeStats_s RF_CumulativeStats_t;
226: typedef struct RF_DagHeader_s RF_DagHeader_t;
227: typedef struct RF_DagList_s RF_DagList_t;
228: typedef struct RF_DagNode_s RF_DagNode_t;
229: typedef struct RF_DeclusteredConfigInfo_s RF_DeclusteredConfigInfo_t;
230: typedef struct RF_DiskId_s RF_DiskId_t;
231: typedef struct RF_DiskMap_s RF_DiskMap_t;
232: typedef struct RF_DiskQueue_s RF_DiskQueue_t;
233: typedef struct RF_DiskQueueData_s RF_DiskQueueData_t;
234: typedef struct RF_DiskQueueSW_s RF_DiskQueueSW_t;
235: typedef struct RF_Etimer_s RF_Etimer_t;
236: typedef struct RF_EventCreate_s RF_EventCreate_t;
237: typedef struct RF_FreeList_s RF_FreeList_t;
238: typedef struct RF_LockReqDesc_s RF_LockReqDesc_t;
239: typedef struct RF_LockTableEntry_s RF_LockTableEntry_t;
240: typedef struct RF_MCPair_s RF_MCPair_t;
241: typedef struct RF_OwnerInfo_s RF_OwnerInfo_t;
242: typedef struct RF_ParityLog_s RF_ParityLog_t;
243: typedef struct RF_ParityLogAppendQueue_s RF_ParityLogAppendQueue_t;
244: typedef struct RF_ParityLogData_s RF_ParityLogData_t;
245: typedef struct RF_ParityLogDiskQueue_s RF_ParityLogDiskQueue_t;
246: typedef struct RF_ParityLogQueue_s RF_ParityLogQueue_t;
247: typedef struct RF_ParityLogRecord_s RF_ParityLogRecord_t;
248: typedef struct RF_PerDiskReconCtrl_s RF_PerDiskReconCtrl_t;
249: typedef struct RF_PSStatusHeader_s RF_PSStatusHeader_t;
250: typedef struct RF_PhysDiskAddr_s RF_PhysDiskAddr_t;
251: typedef struct RF_PropHeader_s RF_PropHeader_t;
252: typedef struct RF_Raid_s RF_Raid_t;
253: typedef struct RF_RaidAccessDesc_s RF_RaidAccessDesc_t;
254: typedef struct RF_RaidDisk_s RF_RaidDisk_t;
255: typedef struct RF_RaidLayout_s RF_RaidLayout_t;
256: typedef struct RF_RaidReconDesc_s RF_RaidReconDesc_t;
257: typedef struct RF_ReconBuffer_s RF_ReconBuffer_t;
258: typedef struct RF_ReconConfig_s RF_ReconConfig_t;
259: typedef struct RF_ReconCtrl_s RF_ReconCtrl_t;
260: typedef struct RF_ReconDoneProc_s RF_ReconDoneProc_t;
261: typedef struct RF_ReconEvent_s RF_ReconEvent_t;
262: typedef struct RF_ReconMap_s RF_ReconMap_t;
263: typedef struct RF_ReconMapListElem_s RF_ReconMapListElem_t;
264: typedef struct RF_ReconParityStripeStatus_s RF_ReconParityStripeStatus_t;
265: typedef struct RF_RedFuncs_s RF_RedFuncs_t;
266: typedef struct RF_RegionBufferQueue_s RF_RegionBufferQueue_t;
267: typedef struct RF_RegionInfo_s RF_RegionInfo_t;
268: typedef struct RF_ShutdownList_s RF_ShutdownList_t;
269: typedef struct RF_SpareTableEntry_s RF_SpareTableEntry_t;
270: typedef struct RF_SparetWait_s RF_SparetWait_t;
271: typedef struct RF_StripeLockDesc_s RF_StripeLockDesc_t;
272: typedef struct RF_ThreadGroup_s RF_ThreadGroup_t;
273: typedef struct RF_ThroughputStats_s RF_ThroughputStats_t;
274:
275: /*
276: * Important assumptions regarding ordering of the states in this list
277: * have been made!!! Before disturbing this ordering, look at code in
278: * sys/dev/raidframe/rf_states.c
279: */
280: typedef enum RF_AccessState_e {
281: /* original states */
282: rf_QuiesceState, /* handles queisence for reconstruction */
283: rf_IncrAccessesCountState, /* count accesses in flight */
284: rf_MapState, /* map access to disk addresses */
285: rf_LockState, /* take stripe locks */
286: rf_CreateDAGState, /* create DAGs */
287: rf_ExecuteDAGState, /* execute DAGs */
288: rf_ProcessDAGState, /* DAGs are completing- check if correct,
289: * or if we need to retry */
290: rf_CleanupState, /* release stripe locks, clean up */
1.3.2.1 skrll 291: rf_DecrAccessesCountState,
1.1 oster 292: rf_LastState /* must be the last state */
293: } RF_AccessState_t;
294:
295:
296: /* Some constants related to RAIDframe. These are arbitrary and
297: can be modified at will. */
298:
299: #define RF_MAXROW 10
300: #define RF_MAXCOL 40
301: #define RF_MAXSPARE 10
302: #define RF_MAXDBGV 75 /* max number of debug variables */
303: #define RF_MAX_DISKS 128 /* max disks per array */
304: #define RF_SPAREMAP_NAME_LEN 128
305: #define RF_PROTECTED_SECTORS 64L /* # of sectors at start of disk to
306: exclude from RAID address space */
307:
308: struct RF_SpareTableEntry_s {
309: u_int spareDisk; /* disk to which this block is spared */
310: u_int spareBlockOffsetInSUs; /* offset into spare table for that
311: * disk */
312: };
313:
314: union RF_GenericParam_u {
315: void *p;
316: RF_uint64 v;
317: };
318: typedef union RF_GenericParam_u RF_DagParam_t;
319: typedef union RF_GenericParam_u RF_CBParam_t;
320:
321: /* the raidframe configuration, passed down through an ioctl.
322: * the driver can be reconfigured (with total loss of data) at any time,
323: * but it must be shut down first.
324: */
325: struct RF_Config_s {
326: RF_RowCol_t numRow, numCol, numSpare; /* number of rows, columns,
327: * and spare disks */
328: dev_t devs[RF_MAXROW][RF_MAXCOL]; /* device numbers for disks
329: * comprising array */
330: char devnames[RF_MAXROW][RF_MAXCOL][50]; /* device names */
331: dev_t spare_devs[RF_MAXSPARE]; /* device numbers for spare
332: * disks */
333: char spare_names[RF_MAXSPARE][50]; /* device names */
334: RF_SectorNum_t sectPerSU; /* sectors per stripe unit */
335: RF_StripeNum_t SUsPerPU;/* stripe units per parity unit */
336: RF_StripeNum_t SUsPerRU;/* stripe units per reconstruction unit */
337: RF_ParityConfig_t parityConfig; /* identifies the RAID architecture to
338: * be used */
339: RF_DiskQueueType_t diskQueueType; /* 'f' = fifo, 'c' = cvscan,
340: * not used in kernel */
341: char maxOutstandingDiskReqs; /* # concurrent reqs to be sent to a
342: * disk. not used in kernel. */
343: char debugVars[RF_MAXDBGV][50]; /* space for specifying debug
344: * variables & their values */
345: unsigned int layoutSpecificSize; /* size in bytes of
346: * layout-specific info */
347: void *layoutSpecific; /* a pointer to a layout-specific structure to
348: * be copied in */
349: int force; /* if !0, ignore many fatal
350: configuration conditions */
351: /*
352: "force" is used to override cases where the component labels would
353: indicate that configuration should not proceed without user
354: intervention
355: */
356: };
357:
358: typedef RF_uint32 RF_ReconReqFlags_t;
359: /* flags that can be put in the rf_recon_req structure */
360: #define RF_FDFLAGS_NONE 0x0 /* just fail the disk */
361: #define RF_FDFLAGS_RECON 0x1 /* fail and initiate recon */
362:
363: struct rf_recon_req { /* used to tell the kernel to fail a disk */
364: RF_RowCol_t row, col;
365: RF_ReconReqFlags_t flags;
366: void *raidPtr; /* used internally; need not be set at ioctl
367: * time */
368: struct rf_recon_req *next; /* used internally; need not be set at
369: * ioctl time */
370: };
371:
372: struct RF_SparetWait_s {
373: int C, G, fcol; /* C = # disks in row, G = # units in stripe,
374: * fcol = which disk has failed */
375:
376: RF_StripeCount_t SUsPerPU; /* this stuff is the info required to
377: * create a spare table */
378: int TablesPerSpareRegion;
379: int BlocksPerTable;
380: RF_StripeCount_t TableDepthInPUs;
381: RF_StripeCount_t SpareSpaceDepthPerRegionInSUs;
382:
383: RF_SparetWait_t *next; /* used internally; need not be set at ioctl
384: * time */
385: };
386: /*
387: * A physical disk can be in one of several states:
388: * IF YOU ADD A STATE, CHECK TO SEE IF YOU NEED TO MODIFY RF_DEAD_DISK().
389: */
390: enum RF_DiskStatus_e {
391: rf_ds_optimal, /* no problems */
392: rf_ds_failed, /* reconstruction ongoing */
393: rf_ds_reconstructing, /* reconstruction complete to spare, dead disk
394: * not yet replaced */
395: rf_ds_dist_spared, /* reconstruction complete to distributed
396: * spare space, dead disk not yet replaced */
397: rf_ds_spared, /* reconstruction complete to distributed
398: * spare space, dead disk not yet replaced */
399: rf_ds_spare, /* an available spare disk */
400: rf_ds_used_spare /* a spare which has been used, and hence is
401: * not available */
402: };
403: typedef enum RF_DiskStatus_e RF_DiskStatus_t;
404:
405: struct RF_RaidDisk_s {
406: char devname[56]; /* name of device file */
407: RF_DiskStatus_t status; /* whether it is up or down */
408: RF_RowCol_t spareRow; /* if in status "spared", this identifies the
409: * spare disk */
410: RF_RowCol_t spareCol; /* if in status "spared", this identifies the
411: * spare disk */
412: RF_SectorCount_t numBlocks; /* number of blocks, obtained via READ
413: * CAPACITY */
414: int blockSize;
415: RF_SectorCount_t partitionSize; /* The *actual* and *full* size of
416: the partition, from the disklabel */
417: int auto_configured;/* 1 if this component was autoconfigured.
418: 0 otherwise. */
419: dev_t dev;
420: };
421: /* The per-component label information that the user can set */
422: typedef struct RF_ComponentInfo_s {
423: int row; /* the row number of this component */
424: int column; /* the column number of this component */
425: int serial_number; /* a user-specified serial number for this
426: RAID set */
427: } RF_ComponentInfo_t;
428:
429: /* The per-component label information */
430: typedef struct RF_ComponentLabel_s {
431: int version; /* The version of this label. */
432: int serial_number; /* a user-specified serial number for this
433: RAID set */
434: int mod_counter; /* modification counter. Changed (usually
435: by incrementing) every time the label
436: is changed */
437: int row; /* the row number of this component */
438: int column; /* the column number of this component */
439: int num_rows; /* number of rows in this RAID set */
440: int num_columns; /* number of columns in this RAID set */
441: int clean; /* 1 when clean, 0 when dirty */
442: int status; /* rf_ds_optimal, rf_ds_dist_spared, whatever. */
443: /* stuff that will be in version 2 of the label */
444: int sectPerSU; /* Sectors per Stripe Unit */
445: int SUsPerPU; /* Stripe Units per Parity Units */
446: int SUsPerRU; /* Stripe Units per Reconstruction Units */
447: int parityConfig; /* '0' == RAID0, '1' == RAID1, etc. */
448: int maxOutstanding; /* maxOutstanding disk requests */
449: int blockSize; /* size of component block.
450: (disklabel->d_secsize) */
451: int numBlocks; /* number of blocks on this component. May
452: be smaller than the partition size. */
453: int partitionSize; /* number of blocks on this *partition*.
454: Must exactly match the partition size
455: from the disklabel. */
456: int future_use[33]; /* Future expansion */
457: int autoconfigure; /* automatically configure this RAID set.
458: 0 == no, 1 == yes */
459: int root_partition; /* Use this set as /
460: 0 == no, 1 == yes*/
461: int last_unit; /* last unit number (e.g. 0 for /dev/raid0)
462: of this component. Used for autoconfigure
463: only. */
464: int config_order; /* 0 .. n. The order in which the component
465: should be auto-configured. E.g. 0 is will
466: done first, (and would become raid0).
467: This may be in conflict with last_unit!!?! */
468: /* Not currently used. */
469: int future_use2[44]; /* More future expansion */
470: } RF_ComponentLabel_t;
471:
472: typedef struct RF_SingleComponent_s {
473: int row;
474: int column;
475: char component_name[50]; /* name of the component */
476: } RF_SingleComponent_t;
477:
478: typedef struct RF_DeviceConfig_s {
479: u_int rows;
480: u_int cols;
481: u_int maxqdepth;
482: int ndevs;
483: RF_RaidDisk_t devs[RF_MAX_DISKS];
484: int nspares;
485: RF_RaidDisk_t spares[RF_MAX_DISKS];
486: } RF_DeviceConfig_t;
487:
488: typedef struct RF_ProgressInfo_s {
489: RF_uint64 remaining;
490: RF_uint64 completed;
491: RF_uint64 total;
492: } RF_ProgressInfo_t;
493:
1.3.2.1 skrll 494: #ifndef _STANDALONE
1.1 oster 495: typedef struct RF_LayoutSW_s {
496: RF_ParityConfig_t parityConfig;
497: const char *configName;
498:
499: #ifndef _KERNEL
500: /* layout-specific parsing */
501: int (*MakeLayoutSpecific) (FILE * fp, RF_Config_t * cfgPtr,
502: void *arg);
503: void *makeLayoutSpecificArg;
504: #else /* !KERNEL */
505:
506: /* initialization routine */
507: int (*Configure) (RF_ShutdownList_t ** shutdownListp,
508: RF_Raid_t * raidPtr, RF_Config_t * cfgPtr);
509:
510: /* routine to map RAID sector address -> physical (row, col, offset) */
511: void (*MapSector) (RF_Raid_t * raidPtr, RF_RaidAddr_t raidSector,
1.3.2.1 skrll 512: RF_RowCol_t * col,
1.1 oster 513: RF_SectorNum_t * diskSector, int remap);
514:
515: /* routine to map RAID sector address -> physical (r,c,o) of parity
516: * unit */
517: void (*MapParity) (RF_Raid_t * raidPtr, RF_RaidAddr_t raidSector,
1.3.2.1 skrll 518: RF_RowCol_t * col,
1.1 oster 519: RF_SectorNum_t * diskSector, int remap);
520:
521: /* routine to map RAID sector address -> physical (r,c,o) of Q unit */
522: void (*MapQ) (RF_Raid_t * raidPtr, RF_RaidAddr_t raidSector,
1.3.2.1 skrll 523: RF_RowCol_t * col,
1.1 oster 524: RF_SectorNum_t * diskSector, int remap);
525:
526: /* routine to identify the disks comprising a stripe */
527: void (*IdentifyStripe) (RF_Raid_t * raidPtr, RF_RaidAddr_t addr,
1.3.2.1 skrll 528: RF_RowCol_t ** diskids);
1.1 oster 529:
530: /* routine to select a dag */
531: void (*SelectionFunc) (RF_Raid_t * raidPtr, RF_IoType_t type,
532: RF_AccessStripeMap_t * asmap,
533: RF_VoidFuncPtr *);
534:
535: /* map a stripe ID to a parity stripe ID. This is typically the
536: * identity mapping */
537: void (*MapSIDToPSID) (RF_RaidLayout_t * layoutPtr,
538: RF_StripeNum_t stripeID,
539: RF_StripeNum_t * psID,
540: RF_ReconUnitNum_t * which_ru);
541:
542: /* get default head separation limit (may be NULL) */
543: RF_HeadSepLimit_t(*GetDefaultHeadSepLimit) (RF_Raid_t * raidPtr);
544:
545: /* get default num recon buffers (may be NULL) */
546: int (*GetDefaultNumFloatingReconBuffers) (RF_Raid_t * raidPtr);
547:
548: /* get number of spare recon units (may be NULL) */
549: RF_ReconUnitCount_t(*GetNumSpareRUs) (RF_Raid_t * raidPtr);
550:
551: /* spare table installation (may be NULL) */
552: int (*InstallSpareTable) (RF_Raid_t * raidPtr, RF_RowCol_t frow,
553: RF_RowCol_t fcol);
554:
555: /* recon buffer submission function */
556: int (*SubmitReconBuffer) (RF_ReconBuffer_t * rbuf, int keep_it,
557: int use_committed);
558:
559: /*
560: * verify that parity information for a stripe is correct
561: * see rf_parityscan.h for return vals
562: */
563: int (*VerifyParity) (RF_Raid_t * raidPtr, RF_RaidAddr_t raidAddr,
564: RF_PhysDiskAddr_t * parityPDA,
565: int correct_it, RF_RaidAccessFlags_t flags);
566:
567: /* number of faults tolerated by this mapping */
568: int faultsTolerated;
569:
570: /* states to step through in an access. Must end with "LastState". The
571: * default is DefaultStates in rf_layout.c */
1.3.2.1 skrll 572: const RF_AccessState_t *states;
1.1 oster 573:
574: RF_AccessStripeMapFlags_t flags;
575: #endif /* !KERNEL */
576: } RF_LayoutSW_t;
1.3.2.1 skrll 577: #endif
1.1 oster 578:
579: #endif /* !_RF_RAIDFRAMEVAR_H_ */
CVSweb <webmaster@jp.NetBSD.org>