Annotation of src/sys/dev/raidframe/raidframevar.h, revision 1.2
1.2 ! thorpej 1: /* $NetBSD: raidframevar.h,v 1.1 2001/10/04 15:43:58 oster Exp $ */
1.1 oster 2: /*-
3: * Copyright (c) 1996, 1997, 1998 The NetBSD Foundation, Inc.
4: * All rights reserved.
5: *
6: * This code is derived from software contributed to The NetBSD Foundation
7: * by Greg Oster
8: *
9: * Redistribution and use in source and binary forms, with or without
10: * modification, are permitted provided that the following conditions
11: * are met:
12: * 1. Redistributions of source code must retain the above copyright
13: * notice, this list of conditions and the following disclaimer.
14: * 2. Redistributions in binary form must reproduce the above copyright
15: * notice, this list of conditions and the following disclaimer in the
16: * documentation and/or other materials provided with the distribution.
17: * 3. All advertising materials mentioning features or use of this software
18: * must display the following acknowledgement:
19: * This product includes software developed by the NetBSD
20: * Foundation, Inc. and its contributors.
21: * 4. Neither the name of The NetBSD Foundation nor the names of its
22: * contributors may be used to endorse or promote products derived
23: * from this software without specific prior written permission.
24: *
25: * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
26: * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
27: * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28: * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
29: * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
30: * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
31: * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
32: * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
33: * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
34: * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
35: * POSSIBILITY OF SUCH DAMAGE.
36: */
37: /*
38: * Copyright (c) 1995 Carnegie-Mellon University.
39: * All rights reserved.
40: *
41: * Author: Mark Holland
42: *
43: * Permission to use, copy, modify and distribute this software and
44: * its documentation is hereby granted, provided that both the copyright
45: * notice and this permission notice appear in all copies of the
46: * software, derivative works or modified versions, and any portions
47: * thereof, and that both notices appear in supporting documentation.
48: *
49: * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
50: * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
51: * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
52: *
53: * Carnegie Mellon requests users of this software to return to
54: *
55: * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
56: * School of Computer Science
57: * Carnegie Mellon University
58: * Pittsburgh PA 15213-3890
59: *
60: * any improvements or extensions that they make and grant Carnegie the
61: * rights to redistribute these changes.
62: */
63:
64: /*
65: * Copyright (c) 1995 Carnegie-Mellon University.
66: * All rights reserved.
67: *
68: * Author: Jim Zelenka
69: *
70: * Permission to use, copy, modify and distribute this software and
71: * its documentation is hereby granted, provided that both the copyright
72: * notice and this permission notice appear in all copies of the
73: * software, derivative works or modified versions, and any portions
74: * thereof, and that both notices appear in supporting documentation.
75: *
76: * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
77: * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
78: * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
79: *
80: * Carnegie Mellon requests users of this software to return to
81: *
82: * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
83: * School of Computer Science
84: * Carnegie Mellon University
85: * Pittsburgh PA 15213-3890
86: *
87: * any improvements or extensions that they make and grant Carnegie the
88: * rights to redistribute these changes.
89: */
90:
91: /*****************************************************
92: *
93: * raidframevar.h
94: *
95: * main header file for using raidframe in the kernel.
96: *
97: *****************************************************/
98:
99:
100: #ifndef _RF_RAIDFRAMEVAR_H_
101: #define _RF_RAIDFRAMEVAR_H_
102:
103:
104: #include <sys/ioctl.h>
105:
106: #include <sys/errno.h>
107: #include <sys/types.h>
108:
109: #include <sys/uio.h>
110: #include <sys/param.h>
111: #include <sys/proc.h>
112: #include <sys/lock.h>
113:
1.2 ! thorpej 114: #include <sys/mallocvar.h>
! 115:
1.1 oster 116: /*
117: * First, define system-dependent types and constants.
118: *
119: * If the machine is big-endian, RF_BIG_ENDIAN should be 1.
120: * Otherwise, it should be 0.
121: *
122: * The various integer types should be self-explanatory; we
123: * use these elsewhere to avoid size confusion.
124: *
125: * LONGSHIFT is lg(sizeof(long)) (that is, log base two of sizeof(long)
126: *
127: */
128:
129: #include <sys/types.h>
130: #include <machine/endian.h>
131: #include <machine/limits.h>
132:
133: #if BYTE_ORDER == BIG_ENDIAN
134: #define RF_IS_BIG_ENDIAN 1
135: #elif BYTE_ORDER == LITTLE_ENDIAN
136: #define RF_IS_BIG_ENDIAN 0
137: #else
138: #error byte order not defined
139: #endif
140: typedef int8_t RF_int8;
141: typedef u_int8_t RF_uint8;
142: typedef int16_t RF_int16;
143: typedef u_int16_t RF_uint16;
144: typedef int32_t RF_int32;
145: typedef u_int32_t RF_uint32;
146: typedef int64_t RF_int64;
147: typedef u_int64_t RF_uint64;
148: #if LONG_BIT == 32
149: #define RF_LONGSHIFT 2
150: #elif LONG_BIT == 64
151: #define RF_LONGSHIFT 3
152: #else
153: #error word size not defined
154: #endif
155:
156: /*
157: * These are just zero and non-zero. We don't use "TRUE"
158: * and "FALSE" because there's too much nonsense trying
159: * to get them defined exactly once on every platform, given
160: * the different places they may be defined in system header
161: * files.
162: */
163: #define RF_TRUE 1
164: #define RF_FALSE 0
1.2 ! thorpej 165:
! 166: /* Malloc types. */
! 167: MALLOC_DECLARE(M_RAIDFRAME);
1.1 oster 168:
169: /*
170: * Now, some generic types
171: */
172: typedef RF_uint64 RF_IoCount_t;
173: typedef RF_uint64 RF_Offset_t;
174: typedef RF_uint32 RF_PSSFlags_t;
175: typedef RF_uint64 RF_SectorCount_t;
176: typedef RF_uint64 RF_StripeCount_t;
177: typedef RF_int64 RF_SectorNum_t;/* these are unsigned so we can set them to
178: * (-1) for "uninitialized" */
179: typedef RF_int64 RF_StripeNum_t;
180: typedef RF_int64 RF_RaidAddr_t;
181: typedef int RF_RowCol_t; /* unsigned so it can be (-1) */
182: typedef RF_int64 RF_HeadSepLimit_t;
183: typedef RF_int64 RF_ReconUnitCount_t;
184: typedef int RF_ReconUnitNum_t;
185:
186: typedef char RF_ParityConfig_t;
187:
188: typedef char RF_DiskQueueType_t[1024];
189: #define RF_DISK_QUEUE_TYPE_NONE ""
190:
191: /* values for the 'type' field in a reconstruction buffer */
192: typedef int RF_RbufType_t;
193: #define RF_RBUF_TYPE_EXCLUSIVE 0 /* this buf assigned exclusively to
194: * one disk */
195: #define RF_RBUF_TYPE_FLOATING 1 /* this is a floating recon buf */
196: #define RF_RBUF_TYPE_FORCED 2 /* this rbuf was allocated to complete
197: * a forced recon */
198:
199: typedef char RF_IoType_t;
200: #define RF_IO_TYPE_READ 'r'
201: #define RF_IO_TYPE_WRITE 'w'
202: #define RF_IO_TYPE_NOP 'n'
203: #define RF_IO_IS_R_OR_W(_type_) (((_type_) == RF_IO_TYPE_READ) \
204: || ((_type_) == RF_IO_TYPE_WRITE))
205:
206: typedef void (*RF_VoidFuncPtr) (void *,...);
207:
208: typedef RF_uint32 RF_AccessStripeMapFlags_t;
209: typedef RF_uint32 RF_DiskQueueDataFlags_t;
210: typedef RF_uint32 RF_DiskQueueFlags_t;
211: typedef RF_uint32 RF_RaidAccessFlags_t;
212:
213: #define RF_DISKQUEUE_DATA_FLAGS_NONE ((RF_DiskQueueDataFlags_t)0)
214:
215: typedef struct RF_AccessStripeMap_s RF_AccessStripeMap_t;
216: typedef struct RF_AccessStripeMapHeader_s RF_AccessStripeMapHeader_t;
217: typedef struct RF_AllocListElem_s RF_AllocListElem_t;
218: typedef struct RF_CallbackDesc_s RF_CallbackDesc_t;
219: typedef struct RF_ChunkDesc_s RF_ChunkDesc_t;
220: typedef struct RF_CommonLogData_s RF_CommonLogData_t;
221: typedef struct RF_Config_s RF_Config_t;
222: typedef struct RF_CumulativeStats_s RF_CumulativeStats_t;
223: typedef struct RF_DagHeader_s RF_DagHeader_t;
224: typedef struct RF_DagList_s RF_DagList_t;
225: typedef struct RF_DagNode_s RF_DagNode_t;
226: typedef struct RF_DeclusteredConfigInfo_s RF_DeclusteredConfigInfo_t;
227: typedef struct RF_DiskId_s RF_DiskId_t;
228: typedef struct RF_DiskMap_s RF_DiskMap_t;
229: typedef struct RF_DiskQueue_s RF_DiskQueue_t;
230: typedef struct RF_DiskQueueData_s RF_DiskQueueData_t;
231: typedef struct RF_DiskQueueSW_s RF_DiskQueueSW_t;
232: typedef struct RF_Etimer_s RF_Etimer_t;
233: typedef struct RF_EventCreate_s RF_EventCreate_t;
234: typedef struct RF_FreeList_s RF_FreeList_t;
235: typedef struct RF_LockReqDesc_s RF_LockReqDesc_t;
236: typedef struct RF_LockTableEntry_s RF_LockTableEntry_t;
237: typedef struct RF_MCPair_s RF_MCPair_t;
238: typedef struct RF_OwnerInfo_s RF_OwnerInfo_t;
239: typedef struct RF_ParityLog_s RF_ParityLog_t;
240: typedef struct RF_ParityLogAppendQueue_s RF_ParityLogAppendQueue_t;
241: typedef struct RF_ParityLogData_s RF_ParityLogData_t;
242: typedef struct RF_ParityLogDiskQueue_s RF_ParityLogDiskQueue_t;
243: typedef struct RF_ParityLogQueue_s RF_ParityLogQueue_t;
244: typedef struct RF_ParityLogRecord_s RF_ParityLogRecord_t;
245: typedef struct RF_PerDiskReconCtrl_s RF_PerDiskReconCtrl_t;
246: typedef struct RF_PSStatusHeader_s RF_PSStatusHeader_t;
247: typedef struct RF_PhysDiskAddr_s RF_PhysDiskAddr_t;
248: typedef struct RF_PropHeader_s RF_PropHeader_t;
249: typedef struct RF_Raid_s RF_Raid_t;
250: typedef struct RF_RaidAccessDesc_s RF_RaidAccessDesc_t;
251: typedef struct RF_RaidDisk_s RF_RaidDisk_t;
252: typedef struct RF_RaidLayout_s RF_RaidLayout_t;
253: typedef struct RF_RaidReconDesc_s RF_RaidReconDesc_t;
254: typedef struct RF_ReconBuffer_s RF_ReconBuffer_t;
255: typedef struct RF_ReconConfig_s RF_ReconConfig_t;
256: typedef struct RF_ReconCtrl_s RF_ReconCtrl_t;
257: typedef struct RF_ReconDoneProc_s RF_ReconDoneProc_t;
258: typedef struct RF_ReconEvent_s RF_ReconEvent_t;
259: typedef struct RF_ReconMap_s RF_ReconMap_t;
260: typedef struct RF_ReconMapListElem_s RF_ReconMapListElem_t;
261: typedef struct RF_ReconParityStripeStatus_s RF_ReconParityStripeStatus_t;
262: typedef struct RF_RedFuncs_s RF_RedFuncs_t;
263: typedef struct RF_RegionBufferQueue_s RF_RegionBufferQueue_t;
264: typedef struct RF_RegionInfo_s RF_RegionInfo_t;
265: typedef struct RF_ShutdownList_s RF_ShutdownList_t;
266: typedef struct RF_SpareTableEntry_s RF_SpareTableEntry_t;
267: typedef struct RF_SparetWait_s RF_SparetWait_t;
268: typedef struct RF_StripeLockDesc_s RF_StripeLockDesc_t;
269: typedef struct RF_ThreadGroup_s RF_ThreadGroup_t;
270: typedef struct RF_ThroughputStats_s RF_ThroughputStats_t;
271:
272: /*
273: * Important assumptions regarding ordering of the states in this list
274: * have been made!!! Before disturbing this ordering, look at code in
275: * sys/dev/raidframe/rf_states.c
276: */
277: typedef enum RF_AccessState_e {
278: /* original states */
279: rf_QuiesceState, /* handles queisence for reconstruction */
280: rf_IncrAccessesCountState, /* count accesses in flight */
281: rf_DecrAccessesCountState,
282: rf_MapState, /* map access to disk addresses */
283: rf_LockState, /* take stripe locks */
284: rf_CreateDAGState, /* create DAGs */
285: rf_ExecuteDAGState, /* execute DAGs */
286: rf_ProcessDAGState, /* DAGs are completing- check if correct,
287: * or if we need to retry */
288: rf_CleanupState, /* release stripe locks, clean up */
289: rf_LastState /* must be the last state */
290: } RF_AccessState_t;
291:
292:
293: /* Some constants related to RAIDframe. These are arbitrary and
294: can be modified at will. */
295:
296: #define RF_MAXROW 10
297: #define RF_MAXCOL 40
298: #define RF_MAXSPARE 10
299: #define RF_MAXDBGV 75 /* max number of debug variables */
300: #define RF_MAX_DISKS 128 /* max disks per array */
301: #define RF_SPAREMAP_NAME_LEN 128
302: #define RF_PROTECTED_SECTORS 64L /* # of sectors at start of disk to
303: exclude from RAID address space */
304:
305: struct RF_SpareTableEntry_s {
306: u_int spareDisk; /* disk to which this block is spared */
307: u_int spareBlockOffsetInSUs; /* offset into spare table for that
308: * disk */
309: };
310:
311: union RF_GenericParam_u {
312: void *p;
313: RF_uint64 v;
314: };
315: typedef union RF_GenericParam_u RF_DagParam_t;
316: typedef union RF_GenericParam_u RF_CBParam_t;
317:
318: /* the raidframe configuration, passed down through an ioctl.
319: * the driver can be reconfigured (with total loss of data) at any time,
320: * but it must be shut down first.
321: */
322: struct RF_Config_s {
323: RF_RowCol_t numRow, numCol, numSpare; /* number of rows, columns,
324: * and spare disks */
325: dev_t devs[RF_MAXROW][RF_MAXCOL]; /* device numbers for disks
326: * comprising array */
327: char devnames[RF_MAXROW][RF_MAXCOL][50]; /* device names */
328: dev_t spare_devs[RF_MAXSPARE]; /* device numbers for spare
329: * disks */
330: char spare_names[RF_MAXSPARE][50]; /* device names */
331: RF_SectorNum_t sectPerSU; /* sectors per stripe unit */
332: RF_StripeNum_t SUsPerPU;/* stripe units per parity unit */
333: RF_StripeNum_t SUsPerRU;/* stripe units per reconstruction unit */
334: RF_ParityConfig_t parityConfig; /* identifies the RAID architecture to
335: * be used */
336: RF_DiskQueueType_t diskQueueType; /* 'f' = fifo, 'c' = cvscan,
337: * not used in kernel */
338: char maxOutstandingDiskReqs; /* # concurrent reqs to be sent to a
339: * disk. not used in kernel. */
340: char debugVars[RF_MAXDBGV][50]; /* space for specifying debug
341: * variables & their values */
342: unsigned int layoutSpecificSize; /* size in bytes of
343: * layout-specific info */
344: void *layoutSpecific; /* a pointer to a layout-specific structure to
345: * be copied in */
346: int force; /* if !0, ignore many fatal
347: configuration conditions */
348: /*
349: "force" is used to override cases where the component labels would
350: indicate that configuration should not proceed without user
351: intervention
352: */
353: };
354:
355: typedef RF_uint32 RF_ReconReqFlags_t;
356: /* flags that can be put in the rf_recon_req structure */
357: #define RF_FDFLAGS_NONE 0x0 /* just fail the disk */
358: #define RF_FDFLAGS_RECON 0x1 /* fail and initiate recon */
359:
360: struct rf_recon_req { /* used to tell the kernel to fail a disk */
361: RF_RowCol_t row, col;
362: RF_ReconReqFlags_t flags;
363: void *raidPtr; /* used internally; need not be set at ioctl
364: * time */
365: struct rf_recon_req *next; /* used internally; need not be set at
366: * ioctl time */
367: };
368:
369: struct RF_SparetWait_s {
370: int C, G, fcol; /* C = # disks in row, G = # units in stripe,
371: * fcol = which disk has failed */
372:
373: RF_StripeCount_t SUsPerPU; /* this stuff is the info required to
374: * create a spare table */
375: int TablesPerSpareRegion;
376: int BlocksPerTable;
377: RF_StripeCount_t TableDepthInPUs;
378: RF_StripeCount_t SpareSpaceDepthPerRegionInSUs;
379:
380: RF_SparetWait_t *next; /* used internally; need not be set at ioctl
381: * time */
382: };
383: /*
384: * A physical disk can be in one of several states:
385: * IF YOU ADD A STATE, CHECK TO SEE IF YOU NEED TO MODIFY RF_DEAD_DISK().
386: */
387: enum RF_DiskStatus_e {
388: rf_ds_optimal, /* no problems */
389: rf_ds_failed, /* reconstruction ongoing */
390: rf_ds_reconstructing, /* reconstruction complete to spare, dead disk
391: * not yet replaced */
392: rf_ds_dist_spared, /* reconstruction complete to distributed
393: * spare space, dead disk not yet replaced */
394: rf_ds_spared, /* reconstruction complete to distributed
395: * spare space, dead disk not yet replaced */
396: rf_ds_spare, /* an available spare disk */
397: rf_ds_used_spare /* a spare which has been used, and hence is
398: * not available */
399: };
400: typedef enum RF_DiskStatus_e RF_DiskStatus_t;
401:
402: struct RF_RaidDisk_s {
403: char devname[56]; /* name of device file */
404: RF_DiskStatus_t status; /* whether it is up or down */
405: RF_RowCol_t spareRow; /* if in status "spared", this identifies the
406: * spare disk */
407: RF_RowCol_t spareCol; /* if in status "spared", this identifies the
408: * spare disk */
409: RF_SectorCount_t numBlocks; /* number of blocks, obtained via READ
410: * CAPACITY */
411: int blockSize;
412: RF_SectorCount_t partitionSize; /* The *actual* and *full* size of
413: the partition, from the disklabel */
414: int auto_configured;/* 1 if this component was autoconfigured.
415: 0 otherwise. */
416: dev_t dev;
417: };
418: /* The per-component label information that the user can set */
419: typedef struct RF_ComponentInfo_s {
420: int row; /* the row number of this component */
421: int column; /* the column number of this component */
422: int serial_number; /* a user-specified serial number for this
423: RAID set */
424: } RF_ComponentInfo_t;
425:
426: /* The per-component label information */
427: typedef struct RF_ComponentLabel_s {
428: int version; /* The version of this label. */
429: int serial_number; /* a user-specified serial number for this
430: RAID set */
431: int mod_counter; /* modification counter. Changed (usually
432: by incrementing) every time the label
433: is changed */
434: int row; /* the row number of this component */
435: int column; /* the column number of this component */
436: int num_rows; /* number of rows in this RAID set */
437: int num_columns; /* number of columns in this RAID set */
438: int clean; /* 1 when clean, 0 when dirty */
439: int status; /* rf_ds_optimal, rf_ds_dist_spared, whatever. */
440: /* stuff that will be in version 2 of the label */
441: int sectPerSU; /* Sectors per Stripe Unit */
442: int SUsPerPU; /* Stripe Units per Parity Units */
443: int SUsPerRU; /* Stripe Units per Reconstruction Units */
444: int parityConfig; /* '0' == RAID0, '1' == RAID1, etc. */
445: int maxOutstanding; /* maxOutstanding disk requests */
446: int blockSize; /* size of component block.
447: (disklabel->d_secsize) */
448: int numBlocks; /* number of blocks on this component. May
449: be smaller than the partition size. */
450: int partitionSize; /* number of blocks on this *partition*.
451: Must exactly match the partition size
452: from the disklabel. */
453: int future_use[33]; /* Future expansion */
454: int autoconfigure; /* automatically configure this RAID set.
455: 0 == no, 1 == yes */
456: int root_partition; /* Use this set as /
457: 0 == no, 1 == yes*/
458: int last_unit; /* last unit number (e.g. 0 for /dev/raid0)
459: of this component. Used for autoconfigure
460: only. */
461: int config_order; /* 0 .. n. The order in which the component
462: should be auto-configured. E.g. 0 is will
463: done first, (and would become raid0).
464: This may be in conflict with last_unit!!?! */
465: /* Not currently used. */
466: int future_use2[44]; /* More future expansion */
467: } RF_ComponentLabel_t;
468:
469: typedef struct RF_SingleComponent_s {
470: int row;
471: int column;
472: char component_name[50]; /* name of the component */
473: } RF_SingleComponent_t;
474:
475: typedef struct RF_DeviceConfig_s {
476: u_int rows;
477: u_int cols;
478: u_int maxqdepth;
479: int ndevs;
480: RF_RaidDisk_t devs[RF_MAX_DISKS];
481: int nspares;
482: RF_RaidDisk_t spares[RF_MAX_DISKS];
483: } RF_DeviceConfig_t;
484:
485: typedef struct RF_ProgressInfo_s {
486: RF_uint64 remaining;
487: RF_uint64 completed;
488: RF_uint64 total;
489: } RF_ProgressInfo_t;
490:
491: typedef struct RF_LayoutSW_s {
492: RF_ParityConfig_t parityConfig;
493: const char *configName;
494:
495: #ifndef _KERNEL
496: /* layout-specific parsing */
497: int (*MakeLayoutSpecific) (FILE * fp, RF_Config_t * cfgPtr,
498: void *arg);
499: void *makeLayoutSpecificArg;
500: #else /* !KERNEL */
501:
502: /* initialization routine */
503: int (*Configure) (RF_ShutdownList_t ** shutdownListp,
504: RF_Raid_t * raidPtr, RF_Config_t * cfgPtr);
505:
506: /* routine to map RAID sector address -> physical (row, col, offset) */
507: void (*MapSector) (RF_Raid_t * raidPtr, RF_RaidAddr_t raidSector,
508: RF_RowCol_t * row, RF_RowCol_t * col,
509: RF_SectorNum_t * diskSector, int remap);
510:
511: /* routine to map RAID sector address -> physical (r,c,o) of parity
512: * unit */
513: void (*MapParity) (RF_Raid_t * raidPtr, RF_RaidAddr_t raidSector,
514: RF_RowCol_t * row, RF_RowCol_t * col,
515: RF_SectorNum_t * diskSector, int remap);
516:
517: /* routine to map RAID sector address -> physical (r,c,o) of Q unit */
518: void (*MapQ) (RF_Raid_t * raidPtr, RF_RaidAddr_t raidSector,
519: RF_RowCol_t * row, RF_RowCol_t * col,
520: RF_SectorNum_t * diskSector, int remap);
521:
522: /* routine to identify the disks comprising a stripe */
523: void (*IdentifyStripe) (RF_Raid_t * raidPtr, RF_RaidAddr_t addr,
524: RF_RowCol_t ** diskids,
525: RF_RowCol_t * outRow);
526:
527: /* routine to select a dag */
528: void (*SelectionFunc) (RF_Raid_t * raidPtr, RF_IoType_t type,
529: RF_AccessStripeMap_t * asmap,
530: RF_VoidFuncPtr *);
531:
532: /* map a stripe ID to a parity stripe ID. This is typically the
533: * identity mapping */
534: void (*MapSIDToPSID) (RF_RaidLayout_t * layoutPtr,
535: RF_StripeNum_t stripeID,
536: RF_StripeNum_t * psID,
537: RF_ReconUnitNum_t * which_ru);
538:
539: /* get default head separation limit (may be NULL) */
540: RF_HeadSepLimit_t(*GetDefaultHeadSepLimit) (RF_Raid_t * raidPtr);
541:
542: /* get default num recon buffers (may be NULL) */
543: int (*GetDefaultNumFloatingReconBuffers) (RF_Raid_t * raidPtr);
544:
545: /* get number of spare recon units (may be NULL) */
546: RF_ReconUnitCount_t(*GetNumSpareRUs) (RF_Raid_t * raidPtr);
547:
548: /* spare table installation (may be NULL) */
549: int (*InstallSpareTable) (RF_Raid_t * raidPtr, RF_RowCol_t frow,
550: RF_RowCol_t fcol);
551:
552: /* recon buffer submission function */
553: int (*SubmitReconBuffer) (RF_ReconBuffer_t * rbuf, int keep_it,
554: int use_committed);
555:
556: /*
557: * verify that parity information for a stripe is correct
558: * see rf_parityscan.h for return vals
559: */
560: int (*VerifyParity) (RF_Raid_t * raidPtr, RF_RaidAddr_t raidAddr,
561: RF_PhysDiskAddr_t * parityPDA,
562: int correct_it, RF_RaidAccessFlags_t flags);
563:
564: /* number of faults tolerated by this mapping */
565: int faultsTolerated;
566:
567: /* states to step through in an access. Must end with "LastState". The
568: * default is DefaultStates in rf_layout.c */
569: RF_AccessState_t *states;
570:
571: RF_AccessStripeMapFlags_t flags;
572: #endif /* !KERNEL */
573: } RF_LayoutSW_t;
574:
575: #endif /* !_RF_RAIDFRAMEVAR_H_ */
CVSweb <webmaster@jp.NetBSD.org>