Annotation of src/sys/dev/dm/dm_target_linear.c, revision 1.28

1.28    ! tkusumi     1: /*        $NetBSD: dm_target_linear.c,v 1.27 2019/12/12 16:28:24 tkusumi Exp $      */
1.2       haad        2: 
                      3: /*
                      4:  * Copyright (c) 2008 The NetBSD Foundation, Inc.
                      5:  * All rights reserved.
                      6:  *
                      7:  * This code is derived from software contributed to The NetBSD Foundation
                      8:  * by Adam Hamsik.
                      9:  *
                     10:  * Redistribution and use in source and binary forms, with or without
                     11:  * modification, are permitted provided that the following conditions
                     12:  * are met:
                     13:  * 1. Redistributions of source code must retain the above copyright
                     14:  *    notice, this list of conditions and the following disclaimer.
                     15:  * 2. Redistributions in binary form must reproduce the above copyright
                     16:  *    notice, this list of conditions and the following disclaimer in the
                     17:  *    documentation and/or other materials provided with the distribution.
                     18:  *
                     19:  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
                     20:  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
                     21:  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
                     22:  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
                     23:  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
                     24:  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
                     25:  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
                     26:  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
                     27:  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
                     28:  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
                     29:  * POSSIBILITY OF SUCH DAMAGE.
                     30:  */
1.17      christos   31: #include <sys/cdefs.h>
1.28    ! tkusumi    32: __KERNEL_RCSID(0, "$NetBSD: dm_target_linear.c,v 1.27 2019/12/12 16:28:24 tkusumi Exp $");
1.2       haad       33: 
                     34: /*
                     35:  * This file implements initial version of device-mapper dklinear target.
                     36:  */
                     37: 
                     38: #include <sys/types.h>
                     39: #include <sys/param.h>
                     40: 
                     41: #include <sys/buf.h>
                     42: #include <sys/kmem.h>
1.11      uebayasi   43: #include <sys/lwp.h>
1.2       haad       44: 
                     45: #include <machine/int_fmtio.h>
                     46: 
                     47: #include "dm.h"
                     48: 
                     49: /*
                     50:  * Allocate target specific config data, and link them to table.
                     51:  * This function is called only when, flags is not READONLY and
1.9       haad       52:  * therefore we can add things to pdev list. This should not a
1.6       yamt       53:  * problem because this routine is called only from dm_table_load_ioctl.
1.2       haad       54:  * @argv[0] is name,
                     55:  * @argv[1] is physical data offset.
                     56:  */
                     57: int
1.27      tkusumi    58: dm_target_linear_init(dm_table_entry_t *table_en, int argc, char **argv)
1.2       haad       59: {
                     60:        dm_target_linear_config_t *tlc;
                     61:        dm_pdev_t *dmp;
                     62: 
1.27      tkusumi    63:        /*
                     64:        if (argc != 2) {
                     65:                printf("Linear target takes 2 args\n");
1.8       haad       66:                return EINVAL;
                     67:        }
1.27      tkusumi    68:        */
1.2       haad       69: 
1.8       haad       70:        aprint_debug("Linear target init function called %s--%s!!\n",
                     71:            argv[0], argv[1]);
1.9       haad       72: 
1.2       haad       73:        /* Insert dmp to global pdev list */
1.8       haad       74:        if ((dmp = dm_pdev_insert(argv[0])) == NULL)
1.2       haad       75:                return ENOENT;
1.9       haad       76: 
1.15      chs        77:        tlc = kmem_alloc(sizeof(dm_target_linear_config_t), KM_SLEEP);
1.2       haad       78:        tlc->pdev = dmp;
1.8       haad       79:        tlc->offset = atoi(argv[1]);
1.2       haad       80: 
1.25      tkusumi    81:        table_en->target_config = tlc;
1.2       haad       82: 
                     83:        return 0;
                     84: }
1.17      christos   85: 
1.2       haad       86: /*
                     87:  * Status routine is called to get params string, which is target
                     88:  * specific. When dm_table_status_ioctl is called with flag
                     89:  * DM_STATUS_TABLE_FLAG I have to sent params string back.
                     90:  */
                     91: char *
                     92: dm_target_linear_status(void *target_config)
                     93: {
                     94:        dm_target_linear_config_t *tlc;
                     95:        char *params;
1.8       haad       96:        tlc = target_config;
                     97: 
1.2       haad       98:        aprint_debug("Linear target status function called\n");
                     99: 
1.18      chs       100:        params = kmem_alloc(DM_MAX_PARAMS_SIZE, KM_SLEEP);
1.9       haad      101:        snprintf(params, DM_MAX_PARAMS_SIZE, "%s %" PRIu64,
1.8       haad      102:            tlc->pdev->name, tlc->offset);
                    103: 
1.2       haad      104:        return params;
                    105: }
1.17      christos  106: 
1.2       haad      107: /*
                    108:  * Do IO operation, called from dmstrategy routine.
                    109:  */
                    110: int
1.24      tkusumi   111: dm_target_linear_strategy(dm_table_entry_t *table_en, struct buf *bp)
1.2       haad      112: {
                    113:        dm_target_linear_config_t *tlc;
                    114: 
                    115:        tlc = table_en->target_config;
1.9       haad      116: 
1.2       haad      117:        bp->b_blkno += tlc->offset;
1.9       haad      118: 
1.2       haad      119:        VOP_STRATEGY(tlc->pdev->pdev_vnode, bp);
1.9       haad      120: 
1.2       haad      121:        return 0;
                    122: }
1.17      christos  123: 
1.2       haad      124: /*
1.10      haad      125:  * Sync underlying disk caches.
                    126:  */
                    127: int
1.24      tkusumi   128: dm_target_linear_sync(dm_table_entry_t *table_en)
1.10      haad      129: {
                    130:        int cmd;
                    131:        dm_target_linear_config_t *tlc;
                    132: 
                    133:        tlc = table_en->target_config;
                    134: 
                    135:        cmd = 1;
1.23      tkusumi   136: 
1.10      haad      137:        return VOP_IOCTL(tlc->pdev->pdev_vnode,  DIOCCACHESYNC, &cmd,
1.23      tkusumi   138:            FREAD|FWRITE, kauth_cred_get());
1.10      haad      139: }
1.17      christos  140: 
1.10      haad      141: /*
1.2       haad      142:  * Destroy target specific data. Decrement table pdevs.
                    143:  */
                    144: int
1.24      tkusumi   145: dm_target_linear_destroy(dm_table_entry_t *table_en)
1.2       haad      146: {
                    147: 
                    148:        /*
                    149:         * Destroy function is called for every target even if it
                    150:         * doesn't have target_config.
                    151:         */
                    152:        if (table_en->target_config == NULL)
1.17      christos  153:                goto out;
1.9       haad      154: 
1.17      christos  155:        dm_target_linear_config_t *tlc = table_en->target_config;
1.9       haad      156: 
1.2       haad      157:        /* Decrement pdev ref counter if 0 remove it */
                    158:        dm_pdev_decr(tlc->pdev);
1.9       haad      159: 
1.17      christos  160:        kmem_free(tlc, sizeof(*tlc));
                    161: 
                    162: out:
1.3       haad      163:        /* Unbusy target so we can unload it */
                    164:        dm_target_unbusy(table_en->target);
1.2       haad      165:        return 0;
                    166: }
1.17      christos  167: 
1.16      mbalmer   168: /* Add this target pdev dependencies to prop_array_t */
1.2       haad      169: int
1.24      tkusumi   170: dm_target_linear_deps(dm_table_entry_t *table_en, prop_array_t prop_array)
1.2       haad      171: {
                    172:        dm_target_linear_config_t *tlc;
1.9       haad      173: 
1.2       haad      174:        if (table_en->target_config == NULL)
                    175:                return ENOENT;
1.9       haad      176: 
1.2       haad      177:        tlc = table_en->target_config;
1.9       haad      178: 
1.14      hannken   179:        prop_array_add_uint64(prop_array,
                    180:            (uint64_t) tlc->pdev->pdev_vnode->v_rdev);
1.9       haad      181: 
1.2       haad      182:        return 0;
                    183: }
1.17      christos  184: 
1.2       haad      185: /*
                    186:  * Register upcall device.
                    187:  * Linear target doesn't need any upcall devices but other targets like
                    188:  * mirror, snapshot, multipath, stripe will use this functionality.
                    189:  */
                    190: int
1.24      tkusumi   191: dm_target_linear_upcall(dm_table_entry_t *table_en, struct buf *bp)
1.2       haad      192: {
                    193:        return 0;
                    194: }
1.17      christos  195: 
1.2       haad      196: /*
1.12      mlelstv   197:  * Query physical block size of this target
                    198:  * For a linear target this is just the sector size of the underlying device
                    199:  */
                    200: int
1.24      tkusumi   201: dm_target_linear_secsize(dm_table_entry_t *table_en, unsigned *secsizep)
1.12      mlelstv   202: {
                    203:        dm_target_linear_config_t *tlc;
                    204:        unsigned secsize;
                    205: 
                    206:        secsize = 0;
                    207: 
                    208:        tlc = table_en->target_config;
                    209:        if (tlc != NULL)
                    210:                secsize = tlc->pdev->pdev_secsize;
                    211: 
                    212:        *secsizep = secsize;
                    213: 
                    214:        return 0;
                    215: }
1.17      christos  216: 
1.12      mlelstv   217: /*
1.2       haad      218:  * Transform char s to uint64_t offset number.
                    219:  */
                    220: uint64_t
                    221: atoi(const char *s)
                    222: {
                    223:        uint64_t n;
                    224:        n = 0;
                    225: 
                    226:        while (*s != '\0') {
                    227:                if (!isdigit(*s))
                    228:                        break;
                    229: 
                    230:                n = (10 * n) + (*s - '0');
                    231:                s++;
                    232:        }
                    233: 
                    234:        return n;
                    235: }

CVSweb <webmaster@jp.NetBSD.org>