Annotation of src/sys/dev/dm/dm_target_linear.c, revision 1.20

1.20    ! tkusumi     1: /*        $NetBSD: dm_target_linear.c,v 1.19 2019/12/01 06:53:31 tkusumi Exp $      */
1.2       haad        2: 
                      3: /*
                      4:  * Copyright (c) 2008 The NetBSD Foundation, Inc.
                      5:  * All rights reserved.
                      6:  *
                      7:  * This code is derived from software contributed to The NetBSD Foundation
                      8:  * by Adam Hamsik.
                      9:  *
                     10:  * Redistribution and use in source and binary forms, with or without
                     11:  * modification, are permitted provided that the following conditions
                     12:  * are met:
                     13:  * 1. Redistributions of source code must retain the above copyright
                     14:  *    notice, this list of conditions and the following disclaimer.
                     15:  * 2. Redistributions in binary form must reproduce the above copyright
                     16:  *    notice, this list of conditions and the following disclaimer in the
                     17:  *    documentation and/or other materials provided with the distribution.
                     18:  *
                     19:  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
                     20:  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
                     21:  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
                     22:  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
                     23:  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
                     24:  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
                     25:  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
                     26:  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
                     27:  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
                     28:  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
                     29:  * POSSIBILITY OF SUCH DAMAGE.
                     30:  */
1.17      christos   31: #include <sys/cdefs.h>
1.20    ! tkusumi    32: __KERNEL_RCSID(0, "$NetBSD: dm_target_linear.c,v 1.19 2019/12/01 06:53:31 tkusumi Exp $");
1.2       haad       33: 
                     34: /*
                     35:  * This file implements initial version of device-mapper dklinear target.
                     36:  */
                     37: 
                     38: #include <sys/types.h>
                     39: #include <sys/param.h>
                     40: 
                     41: #include <sys/buf.h>
                     42: #include <sys/kmem.h>
                     43: #include <sys/vnode.h>
1.11      uebayasi   44: #include <sys/lwp.h>
1.2       haad       45: 
                     46: #include <machine/int_fmtio.h>
                     47: 
                     48: #include "dm.h"
                     49: 
                     50: /*
                     51:  * Allocate target specific config data, and link them to table.
                     52:  * This function is called only when, flags is not READONLY and
1.9       haad       53:  * therefore we can add things to pdev list. This should not a
1.6       yamt       54:  * problem because this routine is called only from dm_table_load_ioctl.
1.2       haad       55:  * @argv[0] is name,
                     56:  * @argv[1] is physical data offset.
                     57:  */
                     58: int
1.9       haad       59: dm_target_linear_init(dm_dev_t * dmv, void **target_config, char *params)
1.2       haad       60: {
                     61:        dm_target_linear_config_t *tlc;
                     62:        dm_pdev_t *dmp;
                     63: 
1.8       haad       64:        char **ap, *argv[3];
                     65: 
1.9       haad       66:        if (params == NULL)
1.8       haad       67:                return EINVAL;
1.9       haad       68: 
1.8       haad       69:        /*
                     70:         * Parse a string, containing tokens delimited by white space,
                     71:         * into an argument vector
                     72:         */
                     73:        for (ap = argv; ap < &argv[2] &&
1.9       haad       74:            (*ap = strsep(&params, " \t")) != NULL;) {
1.8       haad       75:                if (**ap != '\0')
                     76:                        ap++;
                     77:        }
1.2       haad       78: 
1.8       haad       79:        aprint_debug("Linear target init function called %s--%s!!\n",
                     80:            argv[0], argv[1]);
1.9       haad       81: 
1.2       haad       82:        /* Insert dmp to global pdev list */
1.8       haad       83:        if ((dmp = dm_pdev_insert(argv[0])) == NULL)
1.2       haad       84:                return ENOENT;
1.9       haad       85: 
1.15      chs        86:        tlc = kmem_alloc(sizeof(dm_target_linear_config_t), KM_SLEEP);
1.2       haad       87:        tlc->pdev = dmp;
1.8       haad       88:        tlc->offset = atoi(argv[1]);
1.2       haad       89: 
1.9       haad       90:        *target_config = tlc;
1.2       haad       91: 
                     92:        return 0;
                     93: }
1.17      christos   94: 
1.2       haad       95: /*
                     96:  * Status routine is called to get params string, which is target
                     97:  * specific. When dm_table_status_ioctl is called with flag
                     98:  * DM_STATUS_TABLE_FLAG I have to sent params string back.
                     99:  */
                    100: char *
                    101: dm_target_linear_status(void *target_config)
                    102: {
                    103:        dm_target_linear_config_t *tlc;
                    104:        char *params;
1.8       haad      105:        tlc = target_config;
                    106: 
1.2       haad      107:        aprint_debug("Linear target status function called\n");
                    108: 
1.18      chs       109:        params = kmem_alloc(DM_MAX_PARAMS_SIZE, KM_SLEEP);
1.9       haad      110:        aprint_normal("%s %" PRIu64, tlc->pdev->name, tlc->offset);
                    111:        snprintf(params, DM_MAX_PARAMS_SIZE, "%s %" PRIu64,
1.8       haad      112:            tlc->pdev->name, tlc->offset);
                    113: 
1.2       haad      114:        return params;
                    115: }
1.17      christos  116: 
1.2       haad      117: /*
                    118:  * Do IO operation, called from dmstrategy routine.
                    119:  */
                    120: int
1.9       haad      121: dm_target_linear_strategy(dm_table_entry_t * table_en, struct buf * bp)
1.2       haad      122: {
                    123:        dm_target_linear_config_t *tlc;
                    124: 
                    125:        tlc = table_en->target_config;
1.9       haad      126: 
1.2       haad      127: /*     printf("Linear target read function called %" PRIu64 "!!\n",
                    128:        tlc->offset);*/
                    129: 
                    130:        bp->b_blkno += tlc->offset;
1.9       haad      131: 
1.2       haad      132:        VOP_STRATEGY(tlc->pdev->pdev_vnode, bp);
1.9       haad      133: 
1.2       haad      134:        return 0;
                    135: 
                    136: }
1.17      christos  137: 
1.2       haad      138: /*
1.10      haad      139:  * Sync underlying disk caches.
                    140:  */
                    141: int
                    142: dm_target_linear_sync(dm_table_entry_t * table_en)
                    143: {
                    144:        int cmd;
                    145:        dm_target_linear_config_t *tlc;
                    146: 
                    147:        tlc = table_en->target_config;
                    148: 
                    149:        cmd = 1;
                    150:        
                    151:        return VOP_IOCTL(tlc->pdev->pdev_vnode,  DIOCCACHESYNC, &cmd,
                    152:            FREAD|FWRITE, kauth_cred_get());    
                    153: }
1.17      christos  154: 
1.10      haad      155: /*
1.2       haad      156:  * Destroy target specific data. Decrement table pdevs.
                    157:  */
                    158: int
1.9       haad      159: dm_target_linear_destroy(dm_table_entry_t * table_en)
1.2       haad      160: {
                    161: 
                    162:        /*
                    163:         * Destroy function is called for every target even if it
                    164:         * doesn't have target_config.
                    165:         */
                    166:        if (table_en->target_config == NULL)
1.17      christos  167:                goto out;
1.9       haad      168: 
1.17      christos  169:        dm_target_linear_config_t *tlc = table_en->target_config;
                    170:        table_en->target_config = NULL;
1.9       haad      171: 
1.2       haad      172:        /* Decrement pdev ref counter if 0 remove it */
                    173:        dm_pdev_decr(tlc->pdev);
1.9       haad      174: 
1.17      christos  175:        kmem_free(tlc, sizeof(*tlc));
                    176: 
                    177: out:
1.3       haad      178:        /* Unbusy target so we can unload it */
                    179:        dm_target_unbusy(table_en->target);
1.2       haad      180:        return 0;
                    181: }
1.17      christos  182: 
1.16      mbalmer   183: /* Add this target pdev dependencies to prop_array_t */
1.2       haad      184: int
1.9       haad      185: dm_target_linear_deps(dm_table_entry_t * table_en, prop_array_t prop_array)
1.2       haad      186: {
                    187:        dm_target_linear_config_t *tlc;
1.9       haad      188: 
1.2       haad      189:        if (table_en->target_config == NULL)
                    190:                return ENOENT;
1.9       haad      191: 
1.2       haad      192:        tlc = table_en->target_config;
1.9       haad      193: 
1.14      hannken   194:        prop_array_add_uint64(prop_array,
                    195:            (uint64_t) tlc->pdev->pdev_vnode->v_rdev);
1.9       haad      196: 
1.2       haad      197:        return 0;
                    198: }
1.17      christos  199: 
1.2       haad      200: /*
                    201:  * Register upcall device.
                    202:  * Linear target doesn't need any upcall devices but other targets like
                    203:  * mirror, snapshot, multipath, stripe will use this functionality.
                    204:  */
                    205: int
1.9       haad      206: dm_target_linear_upcall(dm_table_entry_t * table_en, struct buf * bp)
1.2       haad      207: {
                    208:        return 0;
                    209: }
1.17      christos  210: 
1.2       haad      211: /*
1.12      mlelstv   212:  * Query physical block size of this target
                    213:  * For a linear target this is just the sector size of the underlying device
                    214:  */
                    215: int
                    216: dm_target_linear_secsize(dm_table_entry_t * table_en, unsigned *secsizep)
                    217: {
                    218:        dm_target_linear_config_t *tlc;
                    219:        unsigned secsize;
                    220: 
                    221:        secsize = 0;
                    222: 
                    223:        tlc = table_en->target_config;
                    224:        if (tlc != NULL)
                    225:                secsize = tlc->pdev->pdev_secsize;
                    226: 
                    227:        *secsizep = secsize;
                    228: 
                    229:        return 0;
                    230: }
1.17      christos  231: 
1.12      mlelstv   232: /*
1.2       haad      233:  * Transform char s to uint64_t offset number.
                    234:  */
                    235: uint64_t
                    236: atoi(const char *s)
                    237: {
                    238:        uint64_t n;
                    239:        n = 0;
                    240: 
                    241:        while (*s != '\0') {
                    242:                if (!isdigit(*s))
                    243:                        break;
                    244: 
                    245:                n = (10 * n) + (*s - '0');
                    246:                s++;
                    247:        }
                    248: 
                    249:        return n;
                    250: }

CVSweb <webmaster@jp.NetBSD.org>