Annotation of src/sys/dev/dm/dm_target_linear.c, revision 1.16

1.16    ! mbalmer     1: /*        $NetBSD: dm_target_linear.c,v 1.15 2017/06/01 02:45:09 chs Exp $      */
1.2       haad        2: 
                      3: /*
                      4:  * Copyright (c) 2008 The NetBSD Foundation, Inc.
                      5:  * All rights reserved.
                      6:  *
                      7:  * This code is derived from software contributed to The NetBSD Foundation
                      8:  * by Adam Hamsik.
                      9:  *
                     10:  * Redistribution and use in source and binary forms, with or without
                     11:  * modification, are permitted provided that the following conditions
                     12:  * are met:
                     13:  * 1. Redistributions of source code must retain the above copyright
                     14:  *    notice, this list of conditions and the following disclaimer.
                     15:  * 2. Redistributions in binary form must reproduce the above copyright
                     16:  *    notice, this list of conditions and the following disclaimer in the
                     17:  *    documentation and/or other materials provided with the distribution.
                     18:  *
                     19:  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
                     20:  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
                     21:  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
                     22:  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
                     23:  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
                     24:  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
                     25:  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
                     26:  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
                     27:  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
                     28:  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
                     29:  * POSSIBILITY OF SUCH DAMAGE.
                     30:  */
                     31: 
                     32: 
                     33: /*
                     34:  * This file implements initial version of device-mapper dklinear target.
                     35:  */
                     36: 
                     37: #include <sys/types.h>
                     38: #include <sys/param.h>
                     39: 
                     40: #include <sys/buf.h>
                     41: #include <sys/kmem.h>
                     42: #include <sys/vnode.h>
1.11      uebayasi   43: #include <sys/lwp.h>
1.2       haad       44: 
                     45: #include <machine/int_fmtio.h>
                     46: 
                     47: #include "dm.h"
                     48: 
                     49: /*
                     50:  * Allocate target specific config data, and link them to table.
                     51:  * This function is called only when, flags is not READONLY and
1.9       haad       52:  * therefore we can add things to pdev list. This should not a
1.6       yamt       53:  * problem because this routine is called only from dm_table_load_ioctl.
1.2       haad       54:  * @argv[0] is name,
                     55:  * @argv[1] is physical data offset.
                     56:  */
                     57: int
1.9       haad       58: dm_target_linear_init(dm_dev_t * dmv, void **target_config, char *params)
1.2       haad       59: {
                     60:        dm_target_linear_config_t *tlc;
                     61:        dm_pdev_t *dmp;
                     62: 
1.8       haad       63:        char **ap, *argv[3];
                     64: 
1.9       haad       65:        if (params == NULL)
1.8       haad       66:                return EINVAL;
1.9       haad       67: 
1.8       haad       68:        /*
                     69:         * Parse a string, containing tokens delimited by white space,
                     70:         * into an argument vector
                     71:         */
                     72:        for (ap = argv; ap < &argv[2] &&
1.9       haad       73:            (*ap = strsep(&params, " \t")) != NULL;) {
1.8       haad       74:                if (**ap != '\0')
                     75:                        ap++;
                     76:        }
1.2       haad       77: 
1.8       haad       78:        aprint_debug("Linear target init function called %s--%s!!\n",
                     79:            argv[0], argv[1]);
1.9       haad       80: 
1.2       haad       81:        /* Insert dmp to global pdev list */
1.8       haad       82:        if ((dmp = dm_pdev_insert(argv[0])) == NULL)
1.2       haad       83:                return ENOENT;
1.9       haad       84: 
1.15      chs        85:        tlc = kmem_alloc(sizeof(dm_target_linear_config_t), KM_SLEEP);
1.2       haad       86:        tlc->pdev = dmp;
1.9       haad       87:        tlc->offset = 0;        /* default settings */
                     88: 
1.2       haad       89:        /* Check user input if it is not leave offset as 0. */
1.8       haad       90:        tlc->offset = atoi(argv[1]);
1.2       haad       91: 
1.9       haad       92:        *target_config = tlc;
1.2       haad       93: 
                     94:        dmv->dev_type = DM_LINEAR_DEV;
1.9       haad       95: 
1.2       haad       96:        return 0;
                     97: }
                     98: /*
                     99:  * Status routine is called to get params string, which is target
                    100:  * specific. When dm_table_status_ioctl is called with flag
                    101:  * DM_STATUS_TABLE_FLAG I have to sent params string back.
                    102:  */
                    103: char *
                    104: dm_target_linear_status(void *target_config)
                    105: {
                    106:        dm_target_linear_config_t *tlc;
                    107:        char *params;
1.8       haad      108:        tlc = target_config;
                    109: 
1.2       haad      110:        aprint_debug("Linear target status function called\n");
                    111: 
1.8       haad      112:        if ((params = kmem_alloc(DM_MAX_PARAMS_SIZE, KM_NOSLEEP)) == NULL)
1.2       haad      113:                return NULL;
                    114: 
1.9       haad      115:        aprint_normal("%s %" PRIu64, tlc->pdev->name, tlc->offset);
                    116:        snprintf(params, DM_MAX_PARAMS_SIZE, "%s %" PRIu64,
1.8       haad      117:            tlc->pdev->name, tlc->offset);
                    118: 
1.2       haad      119:        return params;
                    120: }
                    121: /*
                    122:  * Do IO operation, called from dmstrategy routine.
                    123:  */
                    124: int
1.9       haad      125: dm_target_linear_strategy(dm_table_entry_t * table_en, struct buf * bp)
1.2       haad      126: {
                    127:        dm_target_linear_config_t *tlc;
                    128: 
                    129:        tlc = table_en->target_config;
1.9       haad      130: 
1.2       haad      131: /*     printf("Linear target read function called %" PRIu64 "!!\n",
                    132:        tlc->offset);*/
                    133: 
                    134:        bp->b_blkno += tlc->offset;
1.9       haad      135: 
1.2       haad      136:        VOP_STRATEGY(tlc->pdev->pdev_vnode, bp);
1.9       haad      137: 
1.2       haad      138:        return 0;
                    139: 
                    140: }
                    141: /*
1.10      haad      142:  * Sync underlying disk caches.
                    143:  */
                    144: int
                    145: dm_target_linear_sync(dm_table_entry_t * table_en)
                    146: {
                    147:        int cmd;
                    148:        dm_target_linear_config_t *tlc;
                    149: 
                    150:        tlc = table_en->target_config;
                    151: 
                    152:        cmd = 1;
                    153:        
                    154:        return VOP_IOCTL(tlc->pdev->pdev_vnode,  DIOCCACHESYNC, &cmd,
                    155:            FREAD|FWRITE, kauth_cred_get());    
                    156: }
                    157: /*
1.2       haad      158:  * Destroy target specific data. Decrement table pdevs.
                    159:  */
                    160: int
1.9       haad      161: dm_target_linear_destroy(dm_table_entry_t * table_en)
1.2       haad      162: {
                    163:        dm_target_linear_config_t *tlc;
                    164: 
                    165:        /*
                    166:         * Destroy function is called for every target even if it
                    167:         * doesn't have target_config.
                    168:         */
1.9       haad      169: 
1.2       haad      170:        if (table_en->target_config == NULL)
                    171:                return 0;
1.9       haad      172: 
1.2       haad      173:        tlc = table_en->target_config;
1.9       haad      174: 
1.2       haad      175:        /* Decrement pdev ref counter if 0 remove it */
                    176:        dm_pdev_decr(tlc->pdev);
1.9       haad      177: 
1.3       haad      178:        /* Unbusy target so we can unload it */
                    179:        dm_target_unbusy(table_en->target);
1.9       haad      180: 
1.2       haad      181:        kmem_free(table_en->target_config, sizeof(dm_target_linear_config_t));
                    182: 
                    183:        table_en->target_config = NULL;
1.9       haad      184: 
1.2       haad      185:        return 0;
                    186: }
1.16    ! mbalmer   187: /* Add this target pdev dependencies to prop_array_t */
1.2       haad      188: int
1.9       haad      189: dm_target_linear_deps(dm_table_entry_t * table_en, prop_array_t prop_array)
1.2       haad      190: {
                    191:        dm_target_linear_config_t *tlc;
1.9       haad      192: 
1.2       haad      193:        if (table_en->target_config == NULL)
                    194:                return ENOENT;
1.9       haad      195: 
1.2       haad      196:        tlc = table_en->target_config;
1.9       haad      197: 
1.14      hannken   198:        prop_array_add_uint64(prop_array,
                    199:            (uint64_t) tlc->pdev->pdev_vnode->v_rdev);
1.9       haad      200: 
1.2       haad      201:        return 0;
                    202: }
                    203: /*
                    204:  * Register upcall device.
                    205:  * Linear target doesn't need any upcall devices but other targets like
                    206:  * mirror, snapshot, multipath, stripe will use this functionality.
                    207:  */
                    208: int
1.9       haad      209: dm_target_linear_upcall(dm_table_entry_t * table_en, struct buf * bp)
1.2       haad      210: {
                    211:        return 0;
                    212: }
                    213: /*
1.12      mlelstv   214:  * Query physical block size of this target
                    215:  * For a linear target this is just the sector size of the underlying device
                    216:  */
                    217: int
                    218: dm_target_linear_secsize(dm_table_entry_t * table_en, unsigned *secsizep)
                    219: {
                    220:        dm_target_linear_config_t *tlc;
                    221:        unsigned secsize;
                    222: 
                    223:        secsize = 0;
                    224: 
                    225:        tlc = table_en->target_config;
                    226:        if (tlc != NULL)
                    227:                secsize = tlc->pdev->pdev_secsize;
                    228: 
                    229:        *secsizep = secsize;
                    230: 
                    231:        return 0;
                    232: }
                    233: /*
1.2       haad      234:  * Transform char s to uint64_t offset number.
                    235:  */
                    236: uint64_t
                    237: atoi(const char *s)
                    238: {
                    239:        uint64_t n;
                    240:        n = 0;
                    241: 
                    242:        while (*s != '\0') {
                    243:                if (!isdigit(*s))
                    244:                        break;
                    245: 
                    246:                n = (10 * n) + (*s - '0');
                    247:                s++;
                    248:        }
                    249: 
                    250:        return n;
                    251: }

CVSweb <webmaster@jp.NetBSD.org>