Annotation of src/sys/dev/dm/dm_ioctl.c, revision 1.2

1.2     ! haad        1: /*        $NetBSD: dm_ioctl.c,v 1.1.2.23 2008/12/03 00:10:41 haad Exp $      */
        !             2: 
        !             3: /*
        !             4:  * Copyright (c) 2008 The NetBSD Foundation, Inc.
        !             5:  * All rights reserved.
        !             6:  *
        !             7:  * This code is derived from software contributed to The NetBSD Foundation
        !             8:  * by Adam Hamsik.
        !             9:  *
        !            10:  * Redistribution and use in source and binary forms, with or without
        !            11:  * modification, are permitted provided that the following conditions
        !            12:  * are met:
        !            13:  * 1. Redistributions of source code must retain the above copyright
        !            14:  *    notice, this list of conditions and the following disclaimer.
        !            15:  * 2. Redistributions in binary form must reproduce the above copyright
        !            16:  *    notice, this list of conditions and the following disclaimer in the
        !            17:  *    documentation and/or other materials provided with the distribution.
        !            18:  *
        !            19:  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
        !            20:  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
        !            21:  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
        !            22:  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
        !            23:  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
        !            24:  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
        !            25:  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
        !            26:  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
        !            27:  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
        !            28:  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
        !            29:  * POSSIBILITY OF SUCH DAMAGE.
        !            30:  */
        !            31: 
        !            32: /*
        !            33:  * Locking is used to synchronise between ioctl calls and between dm_table's
        !            34:  * users.
        !            35:  *
        !            36:  * ioctl locking:
        !            37:  * Simple reference counting, to count users of device will be used routines
        !            38:  * dm_dev_busy/dm_dev_unbusy are used for that.
        !            39:  * dm_dev_lookup/dm_dev_rem call dm_dev_busy before return(caller is therefore
        !            40:  * holder of reference_counter last).
        !            41:  *
        !            42:  * ioctl routines which change/remove dm_dev parameters must wait on
        !            43:  * dm_dev::dev_cv and when last user will call dm_dev_unbusy they will wake
        !            44:  * up them.
        !            45:  *
        !            46:  * table_head locking:
        !            47:  * To access table entries dm_table_* routines must be used. 
        !            48:  *
        !            49:  * dm_table_get_entry will increment table users reference
        !            50:  * counter. It will return active or inactive table depedns 
        !            51:  * on uint8_t argument.
        !            52:  *
        !            53:  * dm_table_release must be called for every table_entry from
        !            54:  * dm_table_get_entry. Between these to calls tables can'tbe switched
        !            55:  * or destroyed. 
        !            56:  *
        !            57:  * dm_table_head_init initialize talbe_entries SLISTS and io_cv.
        !            58:  *
        !            59:  * dm_table_head_destroy destroy cv.
        !            60:  *
        !            61:  * There are two types of users for dm_table_head first type will
        !            62:  * only read list and try to do anything with it e.g. dmstrategy,
        !            63:  * dm_table_size etc. There is another user for table_head which wants
        !            64:  * to change table lists e.g. dm_dev_resume_ioctl, dm_dev_remove_ioctl,
        !            65:  * dm_table_clear_ioctl.
        !            66:  * 
        !            67:  * NOTE: It is not allowed to call dm_table_destroy, dm_table_switch_tables
        !            68:  *       with hold table reference counter. Table reference counter is hold
        !            69:  *       after calling dm_table_get_entry routine. After calling this
        !            70:  *       function user must call dm_table_release before any writer table
        !            71:  *       operation.
        !            72:  *
        !            73:  * Example: dm_table_get_entry
        !            74:  *          dm_table_destroy/dm_table_switch_tables
        !            75:  * This exaple will lead to deadlock situation because after dm_table_get_entry
        !            76:  * table reference counter is != 0 and dm_table_destroy have to wait on cv until
        !            77:  * reference counter is 0.
        !            78:  *
        !            79:  */
        !            80: 
        !            81: #include <sys/types.h>
        !            82: #include <sys/param.h>
        !            83: 
        !            84: #include <sys/disklabel.h>
        !            85: #include <sys/kmem.h>
        !            86: #include <sys/malloc.h>
        !            87: #include <sys/vnode.h>
        !            88: 
        !            89: #include <machine/int_fmtio.h>
        !            90: 
        !            91: #include "netbsd-dm.h"
        !            92: #include "dm.h"
        !            93: 
        !            94: static uint32_t      sc_minor_num; 
        !            95: 
        !            96: #define DM_REMOVE_FLAG(flag, name) do {                                        \
        !            97:                prop_dictionary_get_uint32(dm_dict,DM_IOCTL_FLAGS,&flag); \
        !            98:                flag &= ~name;                                          \
        !            99:                prop_dictionary_set_uint32(dm_dict,DM_IOCTL_FLAGS,flag); \
        !           100:        } while (/*CONSTCOND*/0)
        !           101: 
        !           102: #define DM_ADD_FLAG(flag, name) do {                                   \
        !           103:                prop_dictionary_get_uint32(dm_dict,DM_IOCTL_FLAGS,&flag); \
        !           104:                flag |= name;                                           \
        !           105:                prop_dictionary_set_uint32(dm_dict,DM_IOCTL_FLAGS,flag); \
        !           106:        } while (/*CONSTCOND*/0)
        !           107: 
        !           108: static int dm_dbg_print_flags(int);
        !           109: 
        !           110: /*
        !           111:  * Print flags sent to the kernel from libevmapper.
        !           112:  */
        !           113: static int
        !           114: dm_dbg_print_flags(int flags)
        !           115: {
        !           116:        aprint_debug("dbg_print --- %d\n",flags);
        !           117:        
        !           118:        if (flags & DM_READONLY_FLAG)
        !           119:                aprint_debug("dbg_flags: DM_READONLY_FLAG set In/Out\n");
        !           120: 
        !           121:        if (flags & DM_SUSPEND_FLAG)
        !           122:                aprint_debug("dbg_flags: DM_SUSPEND_FLAG set In/Out \n");
        !           123: 
        !           124:        if (flags & DM_PERSISTENT_DEV_FLAG)
        !           125:                aprint_debug("db_flags: DM_PERSISTENT_DEV_FLAG set In\n");
        !           126: 
        !           127:        if (flags & DM_STATUS_TABLE_FLAG)
        !           128:                aprint_debug("dbg_flags: DM_STATUS_TABLE_FLAG set In\n");
        !           129: 
        !           130:        if (flags & DM_ACTIVE_PRESENT_FLAG)
        !           131:                aprint_debug("dbg_flags: DM_ACTIVE_PRESENT_FLAG set Out\n");
        !           132: 
        !           133:        if (flags & DM_INACTIVE_PRESENT_FLAG)
        !           134:                aprint_debug("dbg_flags: DM_INACTIVE_PRESENT_FLAG set Out\n");
        !           135: 
        !           136:        if (flags & DM_BUFFER_FULL_FLAG)
        !           137:                aprint_debug("dbg_flags: DM_BUFFER_FULL_FLAG set Out\n");
        !           138: 
        !           139:        if (flags & DM_SKIP_BDGET_FLAG)
        !           140:                aprint_debug("dbg_flags: DM_SKIP_BDGET_FLAG set In\n");
        !           141: 
        !           142:        if (flags & DM_SKIP_LOCKFS_FLAG)
        !           143:                aprint_debug("dbg_flags: DM_SKIP_LOCKFS_FLAG set In\n");
        !           144: 
        !           145:        if (flags & DM_NOFLUSH_FLAG)
        !           146:                aprint_debug("dbg_flags: DM_NOFLUSH_FLAG set In\n");
        !           147:        
        !           148:        return 0;
        !           149: }
        !           150: 
        !           151: /*
        !           152:  * Get version ioctl call I do it as default therefore this
        !           153:  * function is unused now.
        !           154:  */
        !           155: int
        !           156: dm_get_version_ioctl(prop_dictionary_t dm_dict)
        !           157: {
        !           158:        return 0;
        !           159: }
        !           160: 
        !           161: /*
        !           162:  * Get list of all available targets from global
        !           163:  * target list and sent them back to libdevmapper.
        !           164:  */
        !           165: int
        !           166: dm_list_versions_ioctl(prop_dictionary_t dm_dict)
        !           167: {
        !           168:        prop_array_t target_list;
        !           169:        uint32_t flags;
        !           170: 
        !           171:        flags = 0;
        !           172: 
        !           173:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_FLAGS, &flags);
        !           174:        
        !           175:        dm_dbg_print_flags(flags);
        !           176: 
        !           177:        target_list = dm_target_prop_list();
        !           178: 
        !           179:        prop_dictionary_set(dm_dict, DM_IOCTL_CMD_DATA, target_list);
        !           180: 
        !           181:        prop_object_release(target_list);
        !           182:        
        !           183:        return 0;
        !           184: }
        !           185: 
        !           186: /*
        !           187:  * Create in-kernel entry for device. Device attributes such as name, uuid are
        !           188:  * taken from proplib dictionary.
        !           189:  *
        !           190:  */
        !           191: int
        !           192: dm_dev_create_ioctl(prop_dictionary_t dm_dict)
        !           193: {
        !           194:        dm_dev_t *dmv;
        !           195:        const char *name, *uuid;
        !           196:        int r, flags;
        !           197:        
        !           198:        r = 0;
        !           199:        flags = 0;
        !           200:        name = NULL;    
        !           201:        uuid = NULL;
        !           202: 
        !           203:        /* Get needed values from dictionary. */
        !           204:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_NAME, &name);
        !           205:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_UUID, &uuid);
        !           206:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_FLAGS, &flags);
        !           207:        
        !           208:        dm_dbg_print_flags(flags);
        !           209: 
        !           210:        /* Lookup name and uuid if device already exist quit. */
        !           211:        if ((dmv = dm_dev_lookup(name, uuid, -1)) != NULL) {
        !           212:                DM_ADD_FLAG(flags, DM_EXISTS_FLAG); /* Device already exists */
        !           213:                dm_dev_unbusy(dmv);
        !           214:                return EEXIST;
        !           215:        }
        !           216: 
        !           217:        if ((dmv = dm_dev_alloc()) == NULL)
        !           218:                return ENOMEM;
        !           219:                
        !           220:        if (uuid)
        !           221:                strncpy(dmv->uuid, uuid, DM_UUID_LEN);
        !           222:        else 
        !           223:                dmv->uuid[0] = '\0';
        !           224:                
        !           225:        if (name)
        !           226:                strlcpy(dmv->name, name, DM_NAME_LEN);
        !           227: 
        !           228:        dmv->minor = atomic_inc_32_nv(&sc_minor_num);
        !           229: 
        !           230:        dmv->flags = 0; /* device flags are set when needed */
        !           231:        dmv->ref_cnt = 0;
        !           232:        dmv->event_nr = 0;
        !           233:        dmv->dev_type = 0;
        !           234:        
        !           235:        mutex_init(&dmv->dev_mtx, MUTEX_DEFAULT, IPL_NONE);
        !           236:        cv_init(&dmv->dev_cv, "dm_dev");
        !           237: 
        !           238:        dm_table_head_init(&dmv->table_head);
        !           239:        
        !           240:        if (flags & DM_READONLY_FLAG)
        !           241:                dmv->flags |= DM_READONLY_FLAG;
        !           242: 
        !           243:        prop_dictionary_set_uint32(dm_dict, DM_IOCTL_MINOR, dmv->minor);
        !           244:        
        !           245:        if ((r = dm_dev_insert(dmv)) != 0){
        !           246:                dm_dev_free(dmv);
        !           247:        }
        !           248:        
        !           249:        DM_ADD_FLAG(flags, DM_EXISTS_FLAG);
        !           250:        DM_REMOVE_FLAG(flags, DM_INACTIVE_PRESENT_FLAG);
        !           251:        
        !           252:        return r;
        !           253: }
        !           254: 
        !           255: /*
        !           256:  * Get list of created device-mapper devices fromglobal list and
        !           257:  * send it to kernel.
        !           258:  *
        !           259:  * Output dictionary:
        !           260:  *
        !           261:  * <key>cmd_data</key>
        !           262:  *  <array>
        !           263:  *   <dict>
        !           264:  *    <key>name<key>
        !           265:  *    <string>...</string>
        !           266:  *
        !           267:  *    <key>dev</key>
        !           268:  *    <integer>...</integer>
        !           269:  *   </dict>
        !           270:  *  </array>
        !           271:  * 
        !           272:  */
        !           273: int
        !           274: dm_dev_list_ioctl(prop_dictionary_t dm_dict)
        !           275: {
        !           276:        prop_array_t dev_list;
        !           277: 
        !           278:        uint32_t flags;
        !           279:        
        !           280:        flags = 0;
        !           281:        
        !           282:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_FLAGS, &flags);
        !           283:        
        !           284:        dm_dbg_print_flags(flags);
        !           285:        
        !           286:        dev_list = dm_dev_prop_list();
        !           287: 
        !           288:        prop_dictionary_set(dm_dict, DM_IOCTL_CMD_DATA, dev_list);
        !           289:        prop_object_release(dev_list);
        !           290:        
        !           291:        return 0;
        !           292: }
        !           293: 
        !           294: /*
        !           295:  * Rename selected devices old name is in struct dm_ioctl.
        !           296:  * newname is taken from dictionary
        !           297:  *
        !           298:  * <key>cmd_data</key>
        !           299:  *  <array>
        !           300:  *   <string>...</string>
        !           301:  *  </array>
        !           302:  */
        !           303: int
        !           304: dm_dev_rename_ioctl(prop_dictionary_t dm_dict)
        !           305: {
        !           306:        prop_array_t cmd_array;
        !           307:        dm_dev_t *dmv;
        !           308:        
        !           309:        const char *name, *uuid, *n_name;
        !           310:        uint32_t flags, minor;
        !           311: 
        !           312:        name = NULL;
        !           313:        uuid = NULL;
        !           314:        minor = 0;
        !           315:        
        !           316:        /* Get needed values from dictionary. */
        !           317:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_NAME, &name);
        !           318:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_UUID, &uuid);
        !           319:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_FLAGS, &flags);
        !           320:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_MINOR, &minor);
        !           321: 
        !           322:        dm_dbg_print_flags(flags);
        !           323:        
        !           324:        cmd_array = prop_dictionary_get(dm_dict, DM_IOCTL_CMD_DATA);
        !           325: 
        !           326:        prop_array_get_cstring_nocopy(cmd_array, 0, &n_name);
        !           327:        
        !           328:        if (strlen(n_name) + 1 > DM_NAME_LEN)
        !           329:                return EINVAL;
        !           330:        
        !           331:        if ((dmv = dm_dev_rem(name, uuid, minor)) == NULL) {
        !           332:                DM_REMOVE_FLAG(flags, DM_EXISTS_FLAG);
        !           333:                return ENOENT;
        !           334:        }
        !           335: 
        !           336:        /* change device name */
        !           337:        /* XXX How to deal with this change, name only used in
        !           338:         * dm_dev_routines, should I add dm_dev_change_name which will run under the
        !           339:         * dm_dev_list mutex ?
        !           340:         */
        !           341:        strlcpy(dmv->name, n_name, DM_NAME_LEN);
        !           342:        
        !           343:        prop_dictionary_set_uint32(dm_dict, DM_IOCTL_OPEN, dmv->table_head.io_cnt);
        !           344:        prop_dictionary_set_uint32(dm_dict, DM_IOCTL_MINOR, dmv->minor);
        !           345:        prop_dictionary_set_cstring(dm_dict, DM_IOCTL_UUID, dmv->uuid);
        !           346: 
        !           347:        dm_dev_insert(dmv);
        !           348:        
        !           349:        return 0;
        !           350: }
        !           351: 
        !           352: /*
        !           353:  * Remove device from global list I have to remove active
        !           354:  * and inactive tables first.
        !           355:  */
        !           356: int
        !           357: dm_dev_remove_ioctl(prop_dictionary_t dm_dict)
        !           358: {
        !           359:        dm_dev_t *dmv;
        !           360:        const char *name, *uuid;
        !           361:        uint32_t flags, minor;
        !           362:        
        !           363:        flags = 0;
        !           364:        name = NULL;
        !           365:        uuid = NULL;
        !           366:        
        !           367:        /* Get needed values from dictionary. */
        !           368:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_NAME, &name);
        !           369:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_UUID, &uuid);
        !           370:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_FLAGS, &flags);
        !           371:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_MINOR, &minor);
        !           372:        
        !           373:        dm_dbg_print_flags(flags);
        !           374:        
        !           375:        /* Remove device from global device list */
        !           376:        if ((dmv = dm_dev_rem(name, uuid, minor)) == NULL){
        !           377:                DM_REMOVE_FLAG(flags, DM_EXISTS_FLAG);
        !           378:                return ENOENT;
        !           379:        }
        !           380: 
        !           381:        /* Destroy active table first.  */
        !           382:        dm_table_destroy(&dmv->table_head, DM_TABLE_ACTIVE);
        !           383:        
        !           384:        /* Destroy inactive table if exits, too. */
        !           385:        dm_table_destroy(&dmv->table_head, DM_TABLE_INACTIVE);
        !           386:        
        !           387:        dm_table_head_destroy(&dmv->table_head);
        !           388: 
        !           389:        mutex_destroy(&dmv->dev_mtx);
        !           390:        cv_destroy(&dmv->dev_cv);
        !           391:        
        !           392:        /* Destroy device */
        !           393:        (void)dm_dev_free(dmv);
        !           394: 
        !           395:        return 0;
        !           396: }
        !           397: 
        !           398: /*
        !           399:  * Return actual state of device to libdevmapper.
        !           400:  */
        !           401: int
        !           402: dm_dev_status_ioctl(prop_dictionary_t dm_dict)
        !           403: {
        !           404:        dm_dev_t *dmv;
        !           405:        const char *name, *uuid;
        !           406:        uint32_t flags, j, minor;
        !           407:        
        !           408:        name = NULL;
        !           409:        uuid = NULL;
        !           410:        flags = 0;
        !           411:        j = 0;
        !           412:        
        !           413:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_NAME, &name);
        !           414:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_UUID, &uuid);
        !           415:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_FLAGS, &flags);
        !           416:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_MINOR, &minor);
        !           417:                
        !           418:        if ((dmv = dm_dev_lookup(name, uuid, minor)) == NULL) {
        !           419:                DM_REMOVE_FLAG(flags, DM_EXISTS_FLAG);
        !           420:                return ENOENT;
        !           421:        }
        !           422: 
        !           423:        dm_dbg_print_flags(dmv->flags);
        !           424:        
        !           425:        prop_dictionary_set_uint32(dm_dict, DM_IOCTL_OPEN, dmv->table_head.io_cnt);
        !           426:        prop_dictionary_set_uint32(dm_dict, DM_IOCTL_MINOR, dmv->minor);
        !           427:        prop_dictionary_set_cstring(dm_dict, DM_IOCTL_UUID, dmv->uuid);
        !           428: 
        !           429:        if (dmv->flags & DM_SUSPEND_FLAG)
        !           430:                DM_ADD_FLAG(flags, DM_SUSPEND_FLAG);
        !           431: 
        !           432:        /* Add status flags for tables I have to check both 
        !           433:           active and inactive tables. */
        !           434:        if ((j = dm_table_get_target_count(&dmv->table_head, DM_TABLE_ACTIVE))) {
        !           435:                DM_ADD_FLAG(flags, DM_ACTIVE_PRESENT_FLAG);
        !           436:        } else
        !           437:                DM_REMOVE_FLAG(flags, DM_ACTIVE_PRESENT_FLAG);
        !           438:        
        !           439:        prop_dictionary_set_uint32(dm_dict, DM_IOCTL_TARGET_COUNT, j);
        !           440:        
        !           441:        if (dm_table_get_target_count(&dmv->table_head, DM_TABLE_INACTIVE))
        !           442:                DM_ADD_FLAG(flags, DM_INACTIVE_PRESENT_FLAG);
        !           443:        else
        !           444:                DM_REMOVE_FLAG(flags, DM_INACTIVE_PRESENT_FLAG);
        !           445: 
        !           446:        dm_dev_unbusy(dmv);
        !           447:        
        !           448:        return 0;
        !           449: }
        !           450: 
        !           451: /*
        !           452:  * Set only flag to suggest that device is suspended. This call is
        !           453:  * not supported in NetBSD.
        !           454:  *
        !           455:  */
        !           456: int
        !           457: dm_dev_suspend_ioctl(prop_dictionary_t dm_dict)
        !           458: {
        !           459:        dm_dev_t *dmv;
        !           460:        const char *name, *uuid;
        !           461:        uint32_t flags, minor;
        !           462:                
        !           463:        name = NULL;
        !           464:        uuid = NULL;
        !           465:        flags = 0;
        !           466:        
        !           467:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_NAME, &name);
        !           468:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_UUID, &uuid);
        !           469:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_FLAGS, &flags);
        !           470:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_MINOR, &minor);
        !           471:        
        !           472:        if ((dmv = dm_dev_lookup(name, uuid, minor)) == NULL){
        !           473:                DM_REMOVE_FLAG(flags, DM_EXISTS_FLAG);
        !           474:                return ENOENT;
        !           475:        }
        !           476:        
        !           477:        atomic_or_32(&dmv->flags, DM_SUSPEND_FLAG);
        !           478:        
        !           479:        dm_dbg_print_flags(dmv->flags);
        !           480:        
        !           481:        prop_dictionary_set_uint32(dm_dict, DM_IOCTL_OPEN, dmv->table_head.io_cnt);
        !           482:        prop_dictionary_set_uint32(dm_dict, DM_IOCTL_FLAGS, dmv->flags);
        !           483:        prop_dictionary_set_uint32(dm_dict, DM_IOCTL_MINOR, dmv->minor);
        !           484:        
        !           485:        dm_dev_unbusy(dmv);
        !           486:                
        !           487:        /* Add flags to dictionary flag after dmv -> dict copy */
        !           488:        DM_ADD_FLAG(flags, DM_EXISTS_FLAG); 
        !           489:        
        !           490:        return 0;
        !           491: }
        !           492: 
        !           493: /*
        !           494:  * Simulate Linux behaviour better and switch tables here and not in
        !           495:  * dm_table_load_ioctl. 
        !           496:  */
        !           497: int
        !           498: dm_dev_resume_ioctl(prop_dictionary_t dm_dict)
        !           499: {
        !           500:        dm_dev_t *dmv;
        !           501:        const char *name, *uuid;
        !           502:        uint32_t flags, minor;
        !           503: 
        !           504:        name = NULL;
        !           505:        uuid = NULL;
        !           506:        flags = 0;
        !           507:        
        !           508: /*     char *xml;
        !           509:        xml = prop_dictionary_externalize(dm_dict);
        !           510:        printf("%s\n",xml);*/
        !           511:        
        !           512:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_NAME, &name);
        !           513:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_UUID, &uuid);
        !           514:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_FLAGS, &flags);
        !           515:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_MINOR, &minor);
        !           516:        
        !           517:        /* Remove device from global device list */
        !           518:        if ((dmv = dm_dev_lookup(name, uuid, minor)) == NULL){
        !           519:                DM_REMOVE_FLAG(flags, DM_EXISTS_FLAG);
        !           520:                return ENOENT;
        !           521:        }
        !           522: 
        !           523:        atomic_and_32(&dmv->flags, ~(DM_SUSPEND_FLAG | DM_INACTIVE_PRESENT_FLAG));
        !           524:        atomic_or_32(&dmv->flags, DM_ACTIVE_PRESENT_FLAG);
        !           525: 
        !           526:        dm_table_switch_tables(&dmv->table_head);
        !           527:                
        !           528:        DM_ADD_FLAG(flags, DM_EXISTS_FLAG);     
        !           529: 
        !           530:        dmgetdisklabel(dmv->dk_label, &dmv->table_head);
        !           531:        
        !           532:        prop_dictionary_set_uint32(dm_dict, DM_IOCTL_OPEN, dmv->table_head.io_cnt);
        !           533:        prop_dictionary_set_uint32(dm_dict, DM_IOCTL_FLAGS, dmv->flags);
        !           534:        prop_dictionary_set_uint32(dm_dict, DM_IOCTL_MINOR, dmv->minor);
        !           535: 
        !           536:        dm_dev_unbusy(dmv);
        !           537: 
        !           538:        /* Destroy inactive table after resume. */
        !           539:        dm_table_destroy(&dmv->table_head, DM_TABLE_INACTIVE);
        !           540:        
        !           541:        return 0;
        !           542: }
        !           543: 
        !           544: /*
        !           545:  * Table management routines
        !           546:  * lvm2tools doens't send name/uuid to kernel with table
        !           547:  * for lookup I have to use minor number.
        !           548:  */
        !           549: 
        !           550: /*
        !           551:  * Remove inactive table from device. Routines which work's with inactive tables
        !           552:  * doesn't need to synchronise with dmstrategy. They can synchronise themselves with mutex?.
        !           553:  *
        !           554:  */
        !           555: int
        !           556: dm_table_clear_ioctl(prop_dictionary_t dm_dict)
        !           557: {
        !           558:        dm_dev_t *dmv;
        !           559:        const char *name, *uuid;
        !           560:        uint32_t flags, minor;
        !           561: 
        !           562:        dmv  = NULL;
        !           563:        name = NULL;
        !           564:        uuid = NULL;
        !           565:        flags = 0;
        !           566:        minor = 0;
        !           567:        
        !           568:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_NAME, &name);
        !           569:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_UUID, &uuid);
        !           570:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_FLAGS, &flags);
        !           571:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_MINOR, &minor);
        !           572:        
        !           573:        aprint_debug("Clearing inactive table from device: %s--%s\n",
        !           574:            name, uuid);
        !           575:        
        !           576:        if ((dmv = dm_dev_lookup(name, uuid, minor)) == NULL){
        !           577:                DM_REMOVE_FLAG(flags, DM_EXISTS_FLAG);
        !           578:                return ENOENT;
        !           579:        }
        !           580:        
        !           581:        /* Select unused table */
        !           582:        dm_table_destroy(&dmv->table_head, DM_TABLE_INACTIVE);
        !           583: 
        !           584:        atomic_and_32(&dmv->flags, ~DM_INACTIVE_PRESENT_FLAG);
        !           585: 
        !           586:        dm_dev_unbusy(dmv);
        !           587:        
        !           588:        return 0;
        !           589: }
        !           590: 
        !           591: /*
        !           592:  * Get list of physical devices for active table.
        !           593:  * Get dev_t from pdev vnode and insert it into cmd_array.
        !           594:  *
        !           595:  * XXX. This function is called from lvm2tools to get information
        !           596:  *      about physical devices, too e.g. during vgcreate. 
        !           597:  */
        !           598: int
        !           599: dm_table_deps_ioctl(prop_dictionary_t dm_dict)
        !           600: {
        !           601:        dm_dev_t *dmv;
        !           602:        dm_table_t *tbl;
        !           603:        dm_table_entry_t *table_en;
        !           604: 
        !           605:        prop_array_t cmd_array;
        !           606:        const char *name, *uuid;
        !           607:        uint32_t flags, minor;
        !           608:        
        !           609:        size_t i;
        !           610: 
        !           611:        name = NULL;
        !           612:        uuid = NULL;
        !           613:        dmv  = NULL;
        !           614:        flags = 0;
        !           615:        
        !           616:        i = 0;
        !           617: 
        !           618:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_NAME, &name);
        !           619:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_UUID, &uuid);
        !           620:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_FLAGS, &flags);
        !           621:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_MINOR, &minor);
        !           622: 
        !           623:        /* create array for dev_t's */
        !           624:        cmd_array = prop_array_create();
        !           625: 
        !           626:        if ((dmv = dm_dev_lookup(name, uuid, minor)) == NULL){
        !           627:                DM_REMOVE_FLAG(flags, DM_EXISTS_FLAG);
        !           628:                return ENOENT;
        !           629:        }
        !           630: 
        !           631:        prop_dictionary_set_uint32(dm_dict, DM_IOCTL_MINOR, dmv->minor);
        !           632:        prop_dictionary_set_cstring(dm_dict, DM_IOCTL_NAME, dmv->name);
        !           633:        prop_dictionary_set_cstring(dm_dict, DM_IOCTL_UUID, dmv->uuid);
        !           634:        
        !           635:        aprint_debug("Getting table deps for device: %s\n", dmv->name);
        !           636: 
        !           637:        tbl = dm_table_get_entry(&dmv->table_head, DM_TABLE_ACTIVE);
        !           638: 
        !           639:        SLIST_FOREACH(table_en, tbl, next)
        !           640:                        table_en->target->deps(table_en, cmd_array);
        !           641: 
        !           642:        dm_table_release(&dmv->table_head, DM_TABLE_ACTIVE);
        !           643:        dm_dev_unbusy(dmv);
        !           644:                
        !           645:        prop_dictionary_set(dm_dict, DM_IOCTL_CMD_DATA, cmd_array);
        !           646:        prop_object_release(cmd_array);
        !           647:        
        !           648:        return 0;
        !           649: }
        !           650: 
        !           651: /*
        !           652:  * Load new table/tables to device.
        !           653:  * Call apropriate target init routine open all physical pdev's and
        !           654:  * link them to device. For other targets mirror, strip, snapshot
        !           655:  * etc. also add dependency devices to upcalls list.
        !           656:  *
        !           657:  * Load table to inactive slot table are switched in dm_device_resume_ioctl.
        !           658:  * This simulates Linux behaviour better there should not be any difference.
        !           659:  *
        !           660:  */
        !           661: int
        !           662: dm_table_load_ioctl(prop_dictionary_t dm_dict)
        !           663: {
        !           664:        dm_dev_t *dmv;
        !           665:        dm_table_entry_t *table_en, *last_table;
        !           666:        dm_table_t  *tbl;
        !           667:        dm_target_t *target;
        !           668: 
        !           669:        prop_object_iterator_t iter;
        !           670:        prop_array_t cmd_array;
        !           671:        prop_dictionary_t target_dict;
        !           672:        
        !           673:        const char *name, *uuid, *type;
        !           674: 
        !           675:        uint32_t flags, ret, minor;
        !           676: 
        !           677:        char *str;
        !           678: 
        !           679:        ret = 0;
        !           680:        flags = 0;
        !           681:        name = NULL;
        !           682:        uuid = NULL;
        !           683:        dmv = NULL;
        !           684:        last_table = NULL;
        !           685:        str = NULL;
        !           686: 
        !           687: /*     char *xml;
        !           688:        xml = prop_dictionary_externalize(dm_dict);
        !           689:        printf("%s\n",xml);*/
        !           690:                
        !           691:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_NAME, &name);
        !           692:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_UUID, &uuid);
        !           693:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_FLAGS, &flags);
        !           694:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_MINOR, &minor);
        !           695:        
        !           696:        cmd_array = prop_dictionary_get(dm_dict, DM_IOCTL_CMD_DATA);
        !           697:        iter = prop_array_iterator(cmd_array);
        !           698:        dm_dbg_print_flags(flags);      
        !           699:        
        !           700:        if ((dmv = dm_dev_lookup(name, uuid, minor)) == NULL){
        !           701:                DM_REMOVE_FLAG(flags, DM_EXISTS_FLAG);
        !           702:                return ENOENT;
        !           703:        }
        !           704:        
        !           705:        aprint_debug("Loading table to device: %s--%d\n",name,dmv->table_head.cur_active_table);
        !           706:        
        !           707:        /*
        !           708:         * I have to check if this table slot is not used by another table list.
        !           709:         * if it is used I should free them.
        !           710:         */
        !           711:        if (dmv->flags & DM_INACTIVE_PRESENT_FLAG)
        !           712:                dm_table_destroy(&dmv->table_head, DM_TABLE_INACTIVE);
        !           713: 
        !           714:        dm_dbg_print_flags(dmv->flags);
        !           715:        tbl = dm_table_get_entry(&dmv->table_head, DM_TABLE_INACTIVE);
        !           716:        
        !           717:        aprint_debug("dmv->name = %s\n", dmv->name);
        !           718:        
        !           719:        prop_dictionary_set_uint32(dm_dict, DM_IOCTL_MINOR, dmv->minor);
        !           720: 
        !           721:        while((target_dict = prop_object_iterator_next(iter)) != NULL){
        !           722: 
        !           723:                prop_dictionary_get_cstring_nocopy(target_dict,
        !           724:                    DM_TABLE_TYPE, &type);
        !           725: 
        !           726:                /*
        !           727:                 * If we want to deny table with 2 or more different
        !           728:                 * target we should do it here
        !           729:                 */
        !           730:                if ((target = dm_target_lookup_name(type)) == NULL)
        !           731:                        return ENOENT;
        !           732:                
        !           733:                if ((table_en=kmem_alloc(sizeof(dm_table_entry_t),
        !           734:                            KM_NOSLEEP)) == NULL)
        !           735:                        return ENOMEM;
        !           736:                
        !           737:                prop_dictionary_get_uint64(target_dict, DM_TABLE_START,
        !           738:                    &table_en->start);
        !           739:                prop_dictionary_get_uint64(target_dict, DM_TABLE_LENGTH,
        !           740:                    &table_en->length);
        !           741: 
        !           742:                table_en->target = target;
        !           743:                table_en->dm_dev = dmv;
        !           744:                table_en->target_config = NULL;
        !           745:                
        !           746:                /*
        !           747:                 * There is a parameter string after dm_target_spec
        !           748:                 * structure which  points to /dev/wd0a 284 part of
        !           749:                 * table. String str points to this text. This can be
        !           750:                 * null and therefore it should be checked before we try to
        !           751:                 * use it.
        !           752:                 */
        !           753:                prop_dictionary_get_cstring(target_dict,
        !           754:                    DM_TABLE_PARAMS, (char**)&str);
        !           755:                
        !           756:                if (SLIST_EMPTY(tbl))
        !           757:                        /* insert this table to head */
        !           758:                        SLIST_INSERT_HEAD(tbl, table_en, next);
        !           759:                else
        !           760:                        SLIST_INSERT_AFTER(last_table, table_en, next);
        !           761:                
        !           762:                /*
        !           763:                 * Params string is different for every target,
        !           764:                 * therfore I have to pass it to target init
        !           765:                 * routine and parse parameters there.
        !           766:                 */
        !           767:                
        !           768:                if ((ret = target->init(dmv, &table_en->target_config,
        !           769:                            str)) != 0) {
        !           770: 
        !           771:                        dm_table_destroy(&dmv->table_head, DM_TABLE_INACTIVE);
        !           772:                        free(str, M_TEMP);
        !           773:                        
        !           774:                        return ret;
        !           775:                }
        !           776:                
        !           777:                last_table = table_en;
        !           778: 
        !           779:                free(str, M_TEMP);
        !           780:        }
        !           781:        prop_object_iterator_release(iter);
        !           782:        
        !           783:        DM_ADD_FLAG(flags, DM_INACTIVE_PRESENT_FLAG);
        !           784:        atomic_or_32(&dmv->flags, DM_INACTIVE_PRESENT_FLAG);
        !           785:        
        !           786:        dm_table_release(&dmv->table_head, DM_TABLE_INACTIVE);
        !           787:        dm_dev_unbusy(dmv);
        !           788:        return 0;
        !           789: }
        !           790: 
        !           791: /*
        !           792:  * Get description of all tables loaded to device from kernel
        !           793:  * and send it to libdevmapper.
        !           794:  *
        !           795:  * Output dictionary for every table:
        !           796:  *
        !           797:  * <key>cmd_data</key>
        !           798:  * <array>
        !           799:  *   <dict>
        !           800:  *    <key>type<key>
        !           801:  *    <string>...</string>
        !           802:  *
        !           803:  *    <key>start</key>
        !           804:  *    <integer>...</integer>
        !           805:  *
        !           806:  *    <key>length</key>
        !           807:  *    <integer>...</integer>
        !           808:  *
        !           809:  *    <key>params</key>
        !           810:  *    <string>...</string>
        !           811:  *   </dict>
        !           812:  * </array>
        !           813:  *
        !           814:  */
        !           815: int
        !           816: dm_table_status_ioctl(prop_dictionary_t dm_dict)
        !           817: {
        !           818:        dm_dev_t *dmv;
        !           819:        dm_table_t *tbl;
        !           820:        dm_table_entry_t *table_en;
        !           821: 
        !           822:        prop_array_t cmd_array;
        !           823:        prop_dictionary_t target_dict;
        !           824:        
        !           825:        uint32_t rec_size, minor;
        !           826:        
        !           827:        const char *name, *uuid;
        !           828:        char *params;
        !           829:        int flags;
        !           830:        
        !           831:        dmv = NULL;
        !           832:        uuid = NULL;
        !           833:        name = NULL;
        !           834:        params = NULL;
        !           835:        flags = 0;
        !           836:        rec_size = 0;
        !           837: 
        !           838:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_NAME, &name);
        !           839:        prop_dictionary_get_cstring_nocopy(dm_dict, DM_IOCTL_UUID, &uuid);
        !           840:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_FLAGS, &flags);
        !           841:        prop_dictionary_get_uint32(dm_dict, DM_IOCTL_MINOR, &minor);
        !           842: 
        !           843:        cmd_array = prop_array_create();
        !           844:                
        !           845:        if ((dmv = dm_dev_lookup(name, uuid, minor)) == NULL){
        !           846:                DM_REMOVE_FLAG(flags, DM_EXISTS_FLAG);
        !           847:                return ENOENT;
        !           848:        }
        !           849: 
        !           850:        if (dm_table_get_target_count(&dmv->table_head, DM_TABLE_ACTIVE))
        !           851:                DM_ADD_FLAG(flags, DM_ACTIVE_PRESENT_FLAG);
        !           852:        else {
        !           853:                DM_REMOVE_FLAG(flags, DM_ACTIVE_PRESENT_FLAG);
        !           854:                
        !           855:                if (dm_table_get_target_count(&dmv->table_head, DM_TABLE_INACTIVE))
        !           856:                        DM_ADD_FLAG(flags, DM_INACTIVE_PRESENT_FLAG);
        !           857:                else {
        !           858:                        DM_REMOVE_FLAG(flags, DM_INACTIVE_PRESENT_FLAG);
        !           859:                }
        !           860:        }
        !           861:        
        !           862:        if (dmv->flags & DM_SUSPEND_FLAG)
        !           863:                DM_ADD_FLAG(flags, DM_SUSPEND_FLAG);
        !           864:        
        !           865:        prop_dictionary_set_uint32(dm_dict, DM_IOCTL_MINOR, dmv->minor);
        !           866:        
        !           867:        /* I should use mutex here and not rwlock there can be IO operation
        !           868:           during this ioctl on device. */
        !           869: 
        !           870:        aprint_debug("Status of device tables: %s--%d\n",
        !           871:            name, dmv->table_head.cur_active_table);
        !           872:        
        !           873:        tbl = dm_table_get_entry(&dmv->table_head, DM_TABLE_ACTIVE);
        !           874:        
        !           875:        SLIST_FOREACH(table_en, tbl, next)
        !           876:        {
        !           877:                target_dict = prop_dictionary_create();
        !           878:                aprint_debug("%016" PRIu64 ", length %016" PRIu64
        !           879:                    ", target %s\n", table_en->start, table_en->length,
        !           880:                    table_en->target->name);
        !           881: 
        !           882:                prop_dictionary_set_uint64(target_dict, DM_TABLE_START,
        !           883:                    table_en->start);
        !           884:                prop_dictionary_set_uint64(target_dict, DM_TABLE_LENGTH,
        !           885:                    table_en->length);
        !           886: 
        !           887:                prop_dictionary_set_cstring(target_dict, DM_TABLE_TYPE,
        !           888:                    table_en->target->name);
        !           889: 
        !           890:                /* dm_table_get_cur_actv.table ?? */
        !           891:                prop_dictionary_set_int32(target_dict, DM_TABLE_STAT,
        !           892:                    dmv->table_head.cur_active_table);
        !           893: 
        !           894:                if (flags |= DM_STATUS_TABLE_FLAG) {
        !           895:                        params = table_en->target->status
        !           896:                            (table_en->target_config);
        !           897: 
        !           898:                        if(params != NULL){
        !           899:                                prop_dictionary_set_cstring(target_dict,
        !           900:                                    DM_TABLE_PARAMS, params);
        !           901:                                
        !           902:                                kmem_free(params, strlen(params) + 1);
        !           903:                        }
        !           904:                }
        !           905: 
        !           906:                prop_array_add(cmd_array, target_dict);
        !           907:                prop_object_release(target_dict);
        !           908:        }
        !           909: 
        !           910:        dm_table_release(&dmv->table_head, DM_TABLE_ACTIVE);
        !           911:        dm_dev_unbusy(dmv);
        !           912:        
        !           913:        prop_dictionary_set(dm_dict, DM_IOCTL_CMD_DATA, cmd_array);
        !           914:        prop_object_release(cmd_array);
        !           915:        
        !           916:        return 0;
        !           917: }
        !           918: 
        !           919: 
        !           920: /*
        !           921:  * For every call I have to set kernel driver version.
        !           922:  * Because I can have commands supported only in other
        !           923:  * newer/later version. This routine is called for every 
        !           924:  * ioctl command.
        !           925:  */
        !           926: int
        !           927: dm_check_version(prop_dictionary_t dm_dict)
        !           928: {
        !           929:        size_t i;
        !           930:        int dm_version[3];
        !           931:        prop_array_t ver;
        !           932:        
        !           933:        ver = prop_dictionary_get(dm_dict, DM_IOCTL_VERSION);
        !           934:        
        !           935:        for(i=0; i < 3; i++) 
        !           936:                prop_array_get_uint32(ver, i, &dm_version[i]);
        !           937: 
        !           938:        if (DM_VERSION_MAJOR != dm_version[0] || DM_VERSION_MINOR < dm_version[1]){
        !           939:                aprint_debug("libdevmapper/kernel version mismatch "
        !           940:                    "kernel: %d.%d.%d libdevmapper: %d.%d.%d\n",
        !           941:                    DM_VERSION_MAJOR, DM_VERSION_MINOR, DM_VERSION_PATCHLEVEL,
        !           942:                    dm_version[0], dm_version[1], dm_version[2]);
        !           943:                
        !           944:                return EIO;
        !           945:        }
        !           946: 
        !           947:        prop_array_set_uint32(ver, 0, DM_VERSION_MAJOR);
        !           948:        prop_array_set_uint32(ver, 1, DM_VERSION_MINOR);
        !           949:        prop_array_set_uint32(ver, 2, DM_VERSION_PATCHLEVEL);
        !           950: 
        !           951:        return 0;
        !           952: }

CVSweb <webmaster@jp.NetBSD.org>