Annotation of src/sys/compat/linux/common/linux_exec.c, revision 1.3

1.3     ! fvdl        1: /*     $NetBSD: linux_exec.c,v 1.2 1995/03/05 23:23:37 fvdl Exp $      */
1.1       fvdl        2: 
                      3: /*
                      4:  * Copyright (c) 1995 Frank van der Linden
                      5:  * All rights reserved.
                      6:  *
                      7:  * Redistribution and use in source and binary forms, with or without
                      8:  * modification, are permitted provided that the following conditions
                      9:  * are met:
                     10:  * 1. Redistributions of source code must retain the above copyright
                     11:  *    notice, this list of conditions and the following disclaimer.
                     12:  * 2. Redistributions in binary form must reproduce the above copyright
                     13:  *    notice, this list of conditions and the following disclaimer in the
                     14:  *    documentation and/or other materials provided with the distribution.
                     15:  * 3. All advertising materials mentioning features or use of this software
                     16:  *    must display the following acknowledgement:
                     17:  *      This product includes software developed for the NetBSD Project
                     18:  *      by Frank van der Linden
                     19:  * 4. The name of the author may not be used to endorse or promote products
                     20:  *    derived from this software without specific prior written permission
                     21:  *
                     22:  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
                     23:  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
                     24:  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
                     25:  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
                     26:  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
                     27:  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
                     28:  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
                     29:  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
                     30:  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
                     31:  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
                     32:  *
                     33:  * based on kern/exec_aout.c and compat/sunos/sunos_exec.c
                     34:  */
                     35: 
                     36: #include <sys/param.h>
                     37: #include <sys/systm.h>
                     38: #include <sys/filedesc.h>
                     39: #include <sys/kernel.h>
                     40: #include <sys/proc.h>
                     41: #include <sys/mount.h>
                     42: #include <sys/malloc.h>
                     43: #include <sys/namei.h>
                     44: #include <sys/vnode.h>
                     45: #include <sys/file.h>
                     46: #include <sys/resourcevar.h>
                     47: #include <sys/wait.h>
                     48: 
                     49: #include <sys/mman.h>
                     50: #include <vm/vm.h>
                     51: #include <vm/vm_param.h>
                     52: #include <vm/vm_map.h>
                     53: #include <vm/vm_kern.h>
                     54: #include <vm/vm_pager.h>
                     55: 
                     56: #include <machine/cpu.h>
                     57: #include <machine/reg.h>
                     58: #include <machine/exec.h>
                     59: 
                     60: #include <compat/linux/linux_types.h>
                     61: #include <compat/linux/linux_syscallargs.h>
                     62: #include <compat/linux/linux_util.h>
                     63: #include <compat/linux/linux_exec.h>
                     64: 
                     65: int
                     66: exec_linux_aout_makecmds(p, epp)
                     67:        struct proc *p;
                     68:        struct exec_package *epp;
                     69: {
                     70:        struct exec *linux_ep = epp->ep_hdr;
                     71:        int machtype, magic;
                     72:        int error = ENOEXEC;
                     73: 
                     74:        magic = LINUX_N_MAGIC(linux_ep);
                     75:        machtype = LINUX_N_MACHTYPE(linux_ep);
                     76: 
                     77: 
                     78:        if (machtype != LINUX_MID_MACHINE)
                     79:                return (ENOEXEC);
                     80: 
                     81:        switch (magic) {
                     82:        case QMAGIC:
                     83:                error = exec_linux_aout_prep_qmagic(p, epp);
                     84:                break;
                     85:        case ZMAGIC:
                     86:                error = exec_linux_aout_prep_zmagic(p, epp);
                     87:                break;
                     88:        case NMAGIC:
                     89:                error = exec_linux_aout_prep_nmagic(p, epp);
                     90:                break;
                     91:        case OMAGIC:
                     92:                error = exec_linux_aout_prep_omagic(p, epp);
                     93:                break;
                     94:        }
1.3     ! fvdl       95:        if (error == 0) {
        !            96:                epp->ep_sigcode = linux_sigcode;
        !            97:                epp->ep_esigcode = linux_esigcode;
1.1       fvdl       98:                epp->ep_emul = EMUL_LINUX;
1.3     ! fvdl       99:        }
1.1       fvdl      100:        return error;
                    101: }
                    102: 
                    103: /*
                    104:  * Since text starts at 0x400 in Linux ZMAGIC executables, and 0x400
                    105:  * is very likely not page aligned on most architectures, it is treated
                    106:  * as an NMAGIC here. XXX
                    107:  */
                    108: 
                    109: int
                    110: exec_linux_aout_prep_zmagic(p, epp)
                    111:        struct proc *p;
                    112:        struct exec_package *epp;
                    113: {
                    114:        struct exec *execp = epp->ep_hdr;
                    115: 
                    116:        epp->ep_taddr = LINUX_N_TXTADDR(*execp, ZMAGIC);
                    117:        epp->ep_tsize = execp->a_text;
                    118:        epp->ep_daddr = LINUX_N_DATADDR(*execp, ZMAGIC);
                    119:        epp->ep_dsize = execp->a_data + execp->a_bss;
                    120:        epp->ep_entry = execp->a_entry;
                    121: 
                    122:        /* set up command for text segment */
                    123:        NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_readvn, execp->a_text,
                    124:            epp->ep_taddr, epp->ep_vp, LINUX_N_TXTOFF(*execp, ZMAGIC),
                    125:            VM_PROT_READ|VM_PROT_EXECUTE);
                    126: 
                    127:        /* set up command for data segment */
                    128:        NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_readvn, execp->a_data,
                    129:            epp->ep_daddr, epp->ep_vp, LINUX_N_DATOFF(*execp, ZMAGIC),
                    130:            VM_PROT_READ|VM_PROT_WRITE|VM_PROT_EXECUTE);
                    131: 
                    132:        /* set up command for bss segment */
                    133:        NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_zero, execp->a_bss,
                    134:            epp->ep_daddr + execp->a_data, NULLVP, 0,
                    135:            VM_PROT_READ|VM_PROT_WRITE|VM_PROT_EXECUTE);
                    136: 
                    137:        return exec_aout_setup_stack(p, epp);
                    138: }
                    139: 
                    140: /*
                    141:  * exec_aout_prep_nmagic(): Prepare Linux NMAGIC package.
                    142:  * Not different from the normal stuff.
                    143:  */
                    144: 
                    145: int
                    146: exec_linux_aout_prep_nmagic(p, epp)
                    147:        struct proc *p;
                    148:        struct exec_package *epp;
                    149: {
                    150:        struct exec *execp = epp->ep_hdr;
                    151:        long bsize, baddr;
                    152: 
                    153:        epp->ep_taddr = LINUX_N_TXTADDR(*execp, NMAGIC);
                    154:        epp->ep_tsize = execp->a_text;
                    155:        epp->ep_daddr = LINUX_N_DATADDR(*execp, NMAGIC);
                    156:        epp->ep_dsize = execp->a_data + execp->a_bss;
                    157:        epp->ep_entry = execp->a_entry;
                    158: 
                    159:        /* set up command for text segment */
                    160:        NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_readvn, execp->a_text,
                    161:            epp->ep_taddr, epp->ep_vp, LINUX_N_TXTOFF(*execp, NMAGIC),
                    162:            VM_PROT_READ|VM_PROT_EXECUTE);
                    163: 
                    164:        /* set up command for data segment */
                    165:        NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_readvn, execp->a_data,
                    166:            epp->ep_daddr, epp->ep_vp, LINUX_N_DATOFF(*execp, NMAGIC),
                    167:            VM_PROT_READ|VM_PROT_WRITE|VM_PROT_EXECUTE);
                    168: 
                    169:        /* set up command for bss segment */
                    170:        baddr = roundup(epp->ep_daddr + execp->a_data, NBPG);
                    171:        bsize = epp->ep_daddr + epp->ep_dsize - baddr;
                    172:        if (bsize > 0)
                    173:                NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_zero, bsize, baddr,
                    174:                    NULLVP, 0, VM_PROT_READ|VM_PROT_WRITE|VM_PROT_EXECUTE);
                    175: 
                    176:        return exec_aout_setup_stack(p, epp);
                    177: }
                    178: 
                    179: /*
                    180:  * exec_aout_prep_omagic(): Prepare Linux OMAGIC package.
                    181:  * Business as usual.
                    182:  */
                    183: 
                    184: int
                    185: exec_linux_aout_prep_omagic(p, epp)
                    186:        struct proc *p;
                    187:        struct exec_package *epp;
                    188: {
                    189:        struct exec *execp = epp->ep_hdr;
                    190:        long dsize, bsize, baddr;
                    191: 
                    192:        epp->ep_taddr = LINUX_N_TXTADDR(*execp, OMAGIC);
                    193:        epp->ep_tsize = execp->a_text;
                    194:        epp->ep_daddr = LINUX_N_DATADDR(*execp, OMAGIC);
                    195:        epp->ep_dsize = execp->a_data + execp->a_bss;
                    196:        epp->ep_entry = execp->a_entry;
                    197: 
                    198:        /* set up command for text and data segments */
                    199:        NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_readvn,
                    200:            execp->a_text + execp->a_data, epp->ep_taddr, epp->ep_vp,
                    201:            LINUX_N_TXTOFF(*execp, OMAGIC), VM_PROT_READ|VM_PROT_WRITE|VM_PROT_EXECUTE);
                    202: 
                    203:        /* set up command for bss segment */
                    204:        baddr = roundup(epp->ep_daddr + execp->a_data, NBPG);
                    205:        bsize = epp->ep_daddr + epp->ep_dsize - baddr;
                    206:        if (bsize > 0)
                    207:                NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_zero, bsize, baddr,
                    208:                    NULLVP, 0, VM_PROT_READ|VM_PROT_WRITE|VM_PROT_EXECUTE);
                    209: 
                    210:        /*
                    211:         * Make sure (# of pages) mapped above equals (vm_tsize + vm_dsize);
                    212:         * obreak(2) relies on this fact. Both `vm_tsize' and `vm_dsize' are
                    213:         * computed (in execve(2)) by rounding *up* `ep_tsize' and `ep_dsize'
                    214:         * respectively to page boundaries.
                    215:         * Compensate `ep_dsize' for the amount of data covered by the last
                    216:         * text page. 
                    217:         */
                    218:        dsize = epp->ep_dsize + execp->a_text - roundup(execp->a_text, NBPG);
                    219:        epp->ep_dsize = (dsize > 0) ? dsize : 0;
                    220:        return exec_aout_setup_stack(p, epp);
                    221: }
                    222: 
                    223: int
                    224: exec_linux_aout_prep_qmagic(p, epp)
                    225:        struct proc *p;
                    226:        struct exec_package *epp;
                    227: {
                    228:        struct exec *execp = epp->ep_hdr;
                    229: 
                    230:        epp->ep_taddr = LINUX_N_TXTADDR(*execp, QMAGIC);
                    231:        epp->ep_tsize = execp->a_text;
                    232:        epp->ep_daddr = LINUX_N_DATADDR(*execp, QMAGIC);
                    233:        epp->ep_dsize = execp->a_data + execp->a_bss;
                    234:        epp->ep_entry = execp->a_entry;
                    235: 
                    236:        /*
                    237:         * check if vnode is in open for writing, because we want to
                    238:         * demand-page out of it.  if it is, don't do it, for various
                    239:         * reasons
                    240:         */
                    241:        if ((execp->a_text != 0 || execp->a_data != 0) &&
                    242:            epp->ep_vp->v_writecount != 0) {
                    243: #ifdef DIAGNOSTIC
                    244:                if (epp->ep_vp->v_flag & VTEXT)
                    245:                        panic("exec: a VTEXT vnode has writecount != 0\n");
                    246: #endif
                    247:                return ETXTBSY;
                    248:        }
                    249:        epp->ep_vp->v_flag |= VTEXT;
                    250: 
                    251:        /* set up command for text segment */
                    252:        NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_pagedvn, execp->a_text,
                    253:            epp->ep_taddr, epp->ep_vp, LINUX_N_TXTOFF(*execp, QMAGIC),
                    254:            VM_PROT_READ|VM_PROT_EXECUTE);
                    255: 
                    256:        /* set up command for data segment */
                    257:        NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_pagedvn, execp->a_data,
                    258:            epp->ep_daddr, epp->ep_vp, LINUX_N_DATOFF(*execp, QMAGIC),
                    259:            VM_PROT_READ|VM_PROT_WRITE|VM_PROT_EXECUTE);
                    260: 
                    261:        /* set up command for bss segment */
                    262:        NEW_VMCMD(&epp->ep_vmcmds, vmcmd_map_zero, execp->a_bss,
                    263:            epp->ep_daddr + execp->a_data, NULLVP, 0,
                    264:            VM_PROT_READ|VM_PROT_WRITE|VM_PROT_EXECUTE);
                    265: 
                    266:        return exec_aout_setup_stack(p, epp);
                    267: }
                    268: 
                    269: /*
                    270:  * The Linux system call to load shared libraries. The current shared
                    271:  * libraries are just (QMAGIC) a.out files that are mapped onto a fixed
                    272:  * address * in the process' address space. The address is given in
                    273:  * a_entry. Read in the header, set up some VM commands and run them.
                    274:  *
                    275:  * Yes, both text and data are mapped at once, so we're left with
                    276:  * writeable text for the shared libs. The Linux crt0 seemed to break
                    277:  * sometimes when data was mapped seperately. It munmapped a uselib()
                    278:  * of ld.so by hand, which failed with shared text and data for ld.so
                    279:  * Yuck.
                    280:  *
                    281:  * Because of the problem with ZMAGIC executables (text starts
                    282:  * at 0x400 in the file, but needs t be mapped at 0), ZMAGIC
                    283:  * shared libs are not handled very efficiently :-(
                    284:  */
                    285: 
                    286: int
                    287: linux_uselib(p, uap, retval)
                    288:        struct proc *p;
                    289:        struct linux_uselib_args /* {
                    290:                syscallarg(char *) path;
                    291:        } */ *uap;
                    292:        register_t *retval;
                    293: {
                    294:        caddr_t sg;
                    295:        long bsize, dsize, tsize, taddr, baddr, daddr;
                    296:        struct nameidata ni;
                    297:        struct vnode *vp;
                    298:        struct exec hdr;
                    299:        struct exec_vmcmd_set vcset;
                    300:        int rem, i, magic, error;
                    301: 
                    302:        sg = stackgap_init();
1.2       fvdl      303:        CHECK_ALT_EXIST(p, &sg, SCARG(uap, path));
1.1       fvdl      304: 
                    305:        NDINIT(&ni, LOOKUP, FOLLOW, UIO_USERSPACE, SCARG(uap, path), p);
                    306: 
                    307:        if ((error = namei(&ni)))
                    308:                return error;
                    309: 
                    310:        vp = ni.ni_vp;
                    311: 
                    312:        if ((error = vn_rdwr(UIO_READ, vp, (caddr_t) &hdr, LINUX_AOUT_HDR_SIZE,
                    313:                             0, UIO_SYSSPACE, IO_NODELOCKED, p->p_ucred,
                    314:                             &rem, p))) {
                    315:                vrele(vp);
                    316:                return error;
                    317:        }
                    318: 
                    319:        if (rem != 0) {
                    320:                vrele(vp);
                    321:                return ENOEXEC;
                    322:        }
                    323: 
                    324:        magic = LINUX_N_MAGIC(&hdr);
                    325:        taddr = hdr.a_entry & (~(NBPG - 1));
                    326:        tsize = hdr.a_text;
                    327:        daddr = taddr + tsize;
                    328:        dsize = hdr.a_data + hdr.a_bss;
                    329: 
                    330:        if ((hdr.a_text != 0 || hdr.a_data != 0) && vp->v_writecount != 0) {
                    331:                vrele(vp);
                    332:                 return ETXTBSY;
                    333:         }
                    334:        vp->v_flag |= VTEXT;
                    335: 
                    336:        vcset.evs_cnt = 0;
                    337:        vcset.evs_used = 0;
                    338: 
                    339:        NEW_VMCMD(&vcset,
                    340:                  magic == ZMAGIC ? vmcmd_map_readvn : vmcmd_map_pagedvn,
                    341:                  hdr.a_text + hdr.a_data, taddr,
                    342:                  vp, LINUX_N_TXTOFF(hdr, magic),
                    343:                  VM_PROT_READ|VM_PROT_EXECUTE|VM_PROT_WRITE);
                    344: 
                    345:        baddr = roundup(daddr + hdr.a_data, NBPG);
                    346:        bsize = daddr + dsize - baddr;
                    347:         if (bsize > 0) {
                    348:                 NEW_VMCMD(&vcset, vmcmd_map_zero, bsize, baddr,
                    349:                     NULLVP, 0, VM_PROT_READ|VM_PROT_WRITE|VM_PROT_EXECUTE);
                    350:        }
                    351: 
                    352:        for (i = 0; i < vcset.evs_used && !error; i++) {
                    353:                struct exec_vmcmd *vcp;
                    354: 
                    355:                vcp = &vcset.evs_cmds[i];
                    356:                error = (*vcp->ev_proc)(p, vcp);
                    357:        }
                    358: 
                    359:        kill_vmcmds(&vcset);
                    360: 
                    361:        vrele(vp);
                    362: 
                    363:        return error;
                    364: }
                    365: 
                    366: /*
                    367:  * Execve(2). Just check the alternate emulation path, and pass it on
                    368:  * to the NetBSD execve().
                    369:  */
                    370: int
                    371: linux_execve(p, uap, retval)
                    372:        struct proc *p;
                    373:        struct linux_execve_args /* {
                    374:                syscallarg(char *) path;
                    375:                syscallarg(char **) argv;
                    376:                syscallarg(char **) envp;
                    377:        } */ *uap;
                    378:        register_t *retval;
                    379: {
                    380:        caddr_t sg;
                    381: 
                    382:        sg = stackgap_init();
1.2       fvdl      383:        CHECK_ALT_EXIST(p, &sg, SCARG(uap, path));
1.1       fvdl      384: 
                    385:        return execve(p, uap, retval);
                    386: }

CVSweb <webmaster@jp.NetBSD.org>