The NetBSD Project

CVS log for pkgsrc/textproc/groff/Makefile

[BACK] Up to [cvs.NetBSD.org] / pkgsrc / textproc / groff

Request diff between arbitrary revisions


Keyword substitution: kv
Default branch: MAIN


Revision 1.108: download - view: text, markup, annotated - select for diffs
Thu Jul 30 11:22:04 2026 UTC (3 months, 2 weeks ago) by jperkin
Branches: MAIN
CVS tags: pkgsrc-2026Q3-base, pkgsrc-2026Q3, HEAD
Diff to: previous 1.107: preferred, colored
Changes since revision 1.107: +5 -21 lines
groff: Enable new compatibility wrappers option.

Adam's update also broke groff on illumos by dropping a patch required to avoid
the non-GNU system macros.  Upstream now provides a new compatibility wrappers
argument that has a "manual" option which will install the wrappers with "-os"
suffixes, rather than doing the previous renaming dance.

This helps to simplify the install a lot.  The groff-native an.tmac, m.tmac,
etc files can now be specified directly in the PLIST, and any -os.tmac wrapper
files installed to site-tmac will be picked up by the existing PLIST-local.

While here add TEST_TARGET, I guess they haven't been ran for recent updates.

Revision 1.107: download - view: text, markup, annotated - select for diffs
Mon Jul 27 11:07:02 2026 UTC (3 months, 2 weeks ago) by wiz
Branches: MAIN
Diff to: previous 1.106: preferred, colored
Changes since revision 1.106: +2 -2 lines
groff: enable groff-docs by default again

Fallout was option-specific in the bulk environment, see tech-pkg.

Bump PKGREVISION.

Revision 1.106: download - view: text, markup, annotated - select for diffs
Fri Jul 24 11:29:33 2026 UTC (3 months, 3 weeks ago) by wiz
Branches: MAIN
Diff to: previous 1.105: preferred, colored
Changes since revision 1.105: +2 -3 lines
groff: remove default-on netpbm dependency

This causes a dependency cycle on macOS via cmake -> ... -> groff ->
netpbm -> libjpeg-turbo -> cmake.

Add it to existing ghostscript option, since both are needed for
full-featured grohtml output now.

Add comments explaining both this and the uchardet option, based on
the configure output.

Bump PKGREVISION.

Revision 1.105: download - view: text, markup, annotated - select for diffs
Tue Jul 21 10:42:16 2026 UTC (3 months, 3 weeks ago) by wiz
Branches: MAIN
Diff to: previous 1.104: preferred, colored
Changes since revision 1.104: +2 -2 lines
groff: make uchardet dependency optional, default off

Bump PKGREVISION.

This should fix a dependency cycle observed in the macOS builds;
uchardet needs cmake, and cmake there wants groff.

Revision 1.104: download - view: text, markup, annotated - select for diffs
Sun Jul 19 08:05:45 2026 UTC (3 months, 4 weeks ago) by adam
Branches: MAIN
Diff to: previous 1.103: preferred, colored
Changes since revision 1.103: +13 -18 lines
groff: updated to 1.24.1

VERSION 1.24.1
==============

This release corrects bugs in the groff 1.24.0 release, adds automated
test scripts, revises a misleading diagnostic message, and improves
documentation.  There are no new features.


VERSION 1.24.0
==============

Noteworthy incompatible changes
-------------------------------

*  If your roff(7) documents follow any of the requests `cf`, `hpf`,
   `hpfa`, `mso`, `msoquiet`, `nx`, `open`, `opena`, `so`, `soquiet`, or
   `trf` with a comment after their file name argument, and did not
   place that comment immediately after the file name, you are likely to
   get a diagnostic message resembling the following.

    warning: cannot open macro file 'e.tmac ': No such file or directory

   Or, less likely, the formatter will open the wrong file, one with
   spaces at the end of its name.  That is because these requests are
   now able to process file names containing space characters.  (This
   change also makes the request syntax consistent with that of `ds`,
   `as`, and others.)  A quick fix is to place the comment escape
   sequence as early as possible.  For example, we would change:

     .mso e.tmac \" Load Eric Allman's package.

   to:

     .mso e.tmac\" Load Eric Allman's package.

   to tell the formatter to load the "e.tmac" file rather than
   "e.tmac ".  See the items below for further details.

*  If your roff(7) documents specify a file name that starts with a
   neutral double quote (") to any of the requests `cf`, `hpf`,
   `hpfa`, `mso`, `msoquiet`, `nx`, `open`, `opena`, `so`, `soquiet`, or
   `trf`, you are likely to get a diagnostic message, or the formatter
   will open a file of the same name except for the leading neutral
   double quote.  That is because these requests are now able to process
   file names containing leading space characters.  (This change also
   makes the request syntax consistent with that of `ds`, `as`, and
   others.)  The solution is to add an additional neutral double quote
   to the start of the file name argument.  For example, we would
   change:

     .so "5150".lrc

   to:

     .so ""5150".lrc

   to tell the formatter to read a file named '"5150".lrc', where the
   neutral single quotes bracket the file name.

*  groff mdoc(7)'s font customization feature, undocumented but
   analogous to that of 4.4BSD mdoc, now expects the strings that
   designate font names to be precisely that: font _names_ (or abstract
   styles, or mounting positions), rather than arbitrary *roff syntax.
   (String interpolations remain acceptable, as long as what they
   interpolate is a valid argument to the `ft` request or `\f[xxx]`
   escape sequence.)

*  Support for terminal devices using the CCSID 1047 (EBCDIC) encoding
   has been withdrawn.  See below for motivation and a workaround.

troff
-----

*  troff now recognizes an -S option, which "locks" safer mode,
   rejecting any subsequent specification of -U on the command line with
   an error diagnostic.

*  The `cf` request is now disabled in safer mode; as with `pi` and
   `sy`, you must specify troff's "unsafe mode" option `-U` to use it.
   Alternatively, use the `trf` request, available since groff 0.6
   (circa 1990), to embed a file in GNU troff's output while discarding
   characters (most C0 and C1 controls) that are invalid as GNU troff
   input--and incidentally also undefined in GNU troff output.

*  The `hpfcode` request now emits an error when used, advising of its
   planned withdrawal, but then proceeds with normal behavior.  The
   documented replacement mechanism, the `hcode` request, has existed
   since groff 1.02 (June 1991) at the latest.

*  The `mso` request no longer attempts to open a macro file named, say,
   "tmac.s" if "s.tmac" was specified as the argument and not found, nor
   vice versa.  This feature was a convenience for some old AT&T troff
   installations, but few of those remain in the field, and of those
   that we know to survive, few use a macro file naming convention for
   which this feature is any help.  (DWB 3.3 and Solaris do not, and we
   think other System V troffs don't, either.  Only Plan 9 troff does.)
   `mso` now simply processes the macro search path for a file name
   matching the request argument, and succeeds or fails depending on an
   exact match.

   If you desire this functionality for portability (keeping in mind
   that `mso` is itself a groff extension), consider the following.

     .\" Load the ms package, whatever it might be named.
     .\" troffs without groff extensions must know its full path.
     .if !\n(.g .so /path/to/tmac.s
     .\" The following requests do nothing on non-GNU troffs.
     .do msoquiet s.tmac\" If file present, defines `LP` macro.
     .do if !d LP .msoquiet tmac.s

*  GNU troff no longer accepts nonpositive page lengths.  Attempting to
   set one with the `pl` request clamps the page length to the vertical
   motion quantum as `ll` does with the horizontal motion quantum in
   AT&T and GNU troffs.

*  GNU troff no longer accepts a newline as a delimiter for the
   parameterized escape sequences `\A`, `\b`, `\o`, `\w`, `\X`, and
   `\Z`.

*  GNU troff no longer accepts C0 controls or Latin-1 Supplement
   characters in identifiers.  We prohibit C0 controls to make the
   language less tolerant of unreadable input, and Latin-1 Supplement
   code points to enable us to pivot to reading UTF-8-encoded input in a
   future release.  (Thus, we plan for Latin-1 Supplement characters to
   again be accepted in identifiers, but only as components of multibyte
   UTF-8 sequences.)

*  The `color`, `cp`, `kern`, `linetabs`, and `vpt` requests now
   interpret arguments with negative values as instructions to disable
   the corresponding feature, using the *roff integer-to-Boolean
   conversion idiom instead of the C/C++ one.  Thus, if you invoke these
   requests with a register interpolation as an argument, the outcome
   agrees with an `if` test of the register's value.

*  GNU troff now implements saturating rather than wrapping integer
   arithmetic.  Where before overflow would cause an error diagnostic
   and abort evaluation of the expression, the formatter now emits a
   warning diagnostic in the "range" category and continues evaluation.

*  GNU troff now strips a leading neutral double quote from the argument
   to the `cf`, `hpf`, `hpfa`, `lf`, `mso`, `msoquiet`, `nx`, `pi`,
   `pso`, `so`, `soquiet`, `sy`, and `trf` requests, and the second
   argument to the `open` and `opena` requests, allowing it to contain
   embedded leading spaces.

*  GNU troff now accepts space characters in the argument to the `cf`,
   `hpf`, `hpfa`, `lf`, `mso`, `msoquiet`, `nx`, `so`, `soquiet`, and
   `trf` requests, and the second argument to the `open` and `opena`
   requests.  See "soelim" below.

*  The foregoing two changes make the syntax of the listed requests
   consistent with that of `ds`, `as`, and others that take arguments
   that the formatter reads to the next newline.

*  The "number" warning category has been withdrawn.  The diagnostic
   that formerly used it has been promoted to an error.

*  The "el" warning category has been withdrawn.  If enabled (which it
   was not by default), the formatter would emit a diagnostic if it
   inferred an imbalance between `ie` and `el` requests.  Unfortunately
   its technique wasn't reliable and sometimes spuriously issued these
   warnings, and making it perfectly reliable did not look tractable.
   We recommend using brace escape sequences `\{` and `\}` to ensure
   that your control flow structures remain maintainable.

*  The "right-brace" warning category has been withdrawn.  If enabled
   (which it was not by default), the formatter would emit a diagnostic
   in exactly one circumstance: when a numeric expression was expected
   (as, for instance, the second argument to an `nr` request) but a
   right brace escape sequence `\}` was encountered instead.  This
   diagnostic still issues, but it is now an error.

*  GNU troff now performs some limited processing/transformation of the
   argument to the `\X` escape sequence and its counterpart `device`
   request, to address the requirement that some documents have to pass
   metadata that must encode non-ASCII characters in device extension
   commands.  (For example, a document author may desire a document's
   section headings containing non-ASCII code points to appear correctly
   in PDF bookmarks.  Further, GNU troff encodes its output page
   description language only in ASCII.)  This change is expected to be
   of significance mainly to developers of output drivers for groff;
   groff_diff(7) describes the transformations.  If you have been using
   `\X` or `.device` to pass ASCII data to the output driver as a device
   extension command and require that it remain precisely as-is, use the
   `\!` escape sequence or `output` request, and prefix your data with
   "x X ", the device-independent troff means of expressing a device
   extension command (see groff_out(5)).

*  In nroff mode (in other words, when producing output for devices that
   claim to be terminals), the formatter now reports warning diagnostics
   regarding certain output problems using units of lines (vertically)
   and character cells [ens] (horizontally) instead of inches (or the
   unit configured with the `warnscale` request) to describe the drawing
   position where the problem occurred.

*  The device-independent page description language produced by GNU
   troff now reports unbreakable spaces (those produced with the `\~`
   escape sequence) as word boundaries with the documentary 'w' command,
   just as it does for regular breakable spaces.

*  A new request, `hydefault`, and read-only register, `.hydefault`,
   manage the default automatic hyphenation mode of an environment.
   This resolves a long-standing problem of *roff formatting.

     When processing input like this,
     .nh
     and we temporarily shut off automatic hyphenation,
     .hy
     the foregoing request would not do exactly what we expect.

   AT&T and other troffs apply a hyphenation mode of 1 to the final
   input line (and subsequent ones), rather than restoring the mode in
   use before the `nh` request.  Apart from overturning user
   expectations, for GNU troff "1" is not an appropriate mode for its
   English hyphenation patterns.  (For example, "alibi" would break as
   "ali-bi" instead of "al-ibi" after this argumentless `hy`
   invocation.)  With updates to groff's localization files accompanying
   this release, the foregoing input now works as desired.

*  A new read-only, string-valued register, `.trap`, interpolates the
   name of the next page location trap after the drawing position.

*  New registers `.it`, `.itc`, and `.itm` are available.  These
   read-only (and, in the case of `.itm`, string-valued) registers
   report the number of lines remaining in a pending input trap, a
   Boolean indication of whether that pending input trap honors output
   line continuation (cf. the `it` and `itc` requests), and the name of
   the macro associated with the pending input trap, respectively.

*  A new request, `pchar`, reports to the standard error stream details
   of any class or ordinary, special, or indexed character arguments.

*  A new request, `pcolor`, reports to the standard error stream details
   of each color name specified as an argument, including its color
   space identifier and channel value assignments.  Without arguments,
   all defined colors are listed.  (A device's default stroke and/or
   fill colors, "default", are not listed since they are immutable and
   their details unknown to the formatter.)

*  A new request, `pcomposite`, reports to the standard error stream the
   list of configured composite character mappings.

*  A new request, `pfp`, reports to the standard error stream the
   list of occupied font mounting positions and the corresponding
   abstract style name or font information.

*  A new request, `pftr`, reports to the standard error stream the
   list of configured font translations.

*  A new request, `phw`, reports to the standard error stream the
   list of hyphenation exceptions associated with the current
   hyphenation language.

*  A new request, `pline`, reports to the standard error stream the list
   of output nodes (an internal data structure) corresponding to the
   pending output line.  The list is empty if no such nodes exist.

*  The `pm` request now interprets any arguments as a sequence of macro,
   string, or diversion names, and reports their contents.

*  The `pnr` request now additionally reports the autoincrementation
   amount and interpolation format of each register (if it is not
   string-valued).

*  The `pnr` request now accepts arguments.  It treats each as
   identifying a register and reports its properties to the standard
   error stream.

*  A new request, `pstream`, reports to the standard error stream the
   name of each stream opened with the `open` or `opena` requests, the
   name of the file backing it, and its mode (writing or appending).

*  The `ptr` request has been renamed to `pwh` (mnemonic: "Print WHen
   traps will spring").  As a rule, debugging requests starting with `p`
   correspond to a request name that manipulates the objects reported on
   when the `p` is removed.  However, `ptr` had nothing to do with the
   `tr` request.  The only exceptions to the stated rule of `p`-removal
   are now `line`, `m`, and `stream`, none of which are request names.

*  The `hla` request, when invoked with no arguments, now clears the
   hyphenation language, disabling automatic hyphenation.

*  The read-only registers `.m` and `.M` now interpolate "default" when
   the default color is selected as the stroke or fill color,
   respectively, rather than interpolating nothing.

*  Numeric expression contexts that accept the `z` and `u` scaling
   units, such as the `ps` request and `\s` escape sequence, now also
   accept `p` and `s`.

*  troff's `-c` command-line option now also removes the `color`
   request's ability to enable multi-color output.

eqn
---

*  The "gifont" primitive replaces "gfont" as the means of configuring
   the global italic face in preprocessed equations.  "gfont" remains
   recognized as a synonym for backward compatibility.  The new name is
   intended to ease acquisition of the eqn language in light of GNU
   eqn's thirty-year-old extensions "gbfont" and "grfont".

*  New parameters tunable with the GNU eqn "set" primitive, "half_space"
   and "full_space", enable a document to configure the space widths
   produced by the eqn tokens '^' and '~', respectively.  Previously,
   their widths were determined by the "thin_space" and "thick_space"
   parameters used to tune GNU eqn's automatic spacing computations.

*  The new "reset" primitive restores a named parameter to its default.

groff
-----

*  The groff command now encodes the fate of failing processes in the
   pipeline it constructs and runs so that this information cannot be
   confused with groff's own error conditions (such as a usage error,
   which now produces an exit status of 2).  See the section "Exit
   status" of groff(1) for details.

*  groff now passes the -S option to pic and troff if it is specified.

nroff
-----

*  nroff now recognizes the -a, -D, -I, and -Z options and passes them
   to groff.

*  nroff now supports clustered options ("-tzms", for example) as groff,
   troff, and other GNU getopt-using programs do.

pic
---

*  A new command, `polygon`, supports drawing polygons using arbitrary
   vertices.  The command furthermore accepts the `fill[ed]` modifier.
   You can address a polygon's vertices and the midpoints of its edges
   with the new `.v[er[tex]]` and `.mid[point]` syntax suffixed to an
   object identifier, analogously to the existing compass point and
   `.c[enter]` feature.  Thanks to Duncan Losin.

*  pic's -S option now "locks" safer mode, rejecting any subsequent
   specification of -U on the command line with an error diagnostic.

soelim
------

*  soelim no longer requires embedded space characters in `so` arguments
   to be backslash-escaped.  (It continues to support that syntax, even
   though neither the AT&T nor GNU troff formatters ever have.)  You can
   now embed a sequence of leading spaces in the argument by prefixing
   it with a with a neutral double quote character ("), which the
   program discards.  These changes are to better align this program's
   parsing rules with the language of the formatter; consider the `ds`
   and `as` requests.

Macro packages
--------------

*  Keith Marshall's pdfmark package is no longer distributed with groff,
   but is now separately maintained.  Please visit
   <https://savannah.nongnu.org/projects/groff-pdfmark> for the latest
   version.

*  mom version 2.6 is distributed with this release.  It supports
   multi-line headings.  Thanks to Peter Schaffter.

*  The device-specific macro files loaded by "troffrc" automatically on
   startup, such as "html.tmac", no longer perform font translations for
   some font names used by varieties of AT&T troff ('C', 'Hb', 'HX', and
   several others).

   These names are not portable: in AT&T troff, the font repertoire,
   like the special character repertoire, was device-dependent.  Since
   groff 1.23.0, GNU troff diagnoses attempts to use nonexistent font
   names.  We recommend addressing such portability issues wherever
   suits you: (1) in a document, perhaps by using `ie` and `el` requests
   and the `.g` register to test whether the formatter claims support
   for groff extensions, then `ie` and `el` again with the `F` groff
   conditional expression operator to check for font availability, and
   to perform font remappings with the groff `ftr` request as desired;
   (2) doing so in your "troffrc" file; or (3) by modifying these macro
   files similarly.  Users of the "dvi" and "lbp" output devices should
   be aware that these devices don't supply full families of monospaced
   fonts (and never have).  See grodvi(1) and grolbp(1) for lists of
   font names supported by each device.

   The legacy names are retained for the "pdf" and "ps" devices for this
   release; however, use of them prompts one warning in the "font"
   category from the formatter per deprecated name.  We expect to
   withdraw support for the names completely in a future groff release.
   See gropdf(1) and grops(1) for lists of font names supported by each
   device.

*  Hyperlink support is now enabled by default on PDF and terminal
   devices for an (man) and doc (mdoc) documents.  Instructions and
   commented code for disabling it are in the "man.local" and
   "mdoc.local" files.

*  The `PDFPIC` macro implemented in the "pdfpic.tmac" macro file now
   uses identify(1) (from ImageMagick/GraphicsMagick) and file(1), if
   available, to attempt to determine the dimensions of an image to be
   embedded in a PDF document.  See also the item regarding gropdf(1)
   below.  Thanks to Deri James.

*  The an (man) package now supports use of its hyperlink macros (`UR`,
   `UE`, `MT`, and `ME`) in paragraph tags (that is, on the next line
   after a `TP` macro call).  Use of the `MR` man page cross reference
   macro in a tag was already supported in groff 1.23.0.

*  The behavior of the an (man) package's `SY` and `YS` macros has been
   expanded to enable greater user control over vertical spacing and to
   make them convenient for synopsizing C language functions, not just
   commands.  `SY` no longer puts vertical space on the output, and
   initially breaks the output line _only_ if it is encountered
   repeatedly without a preceding `YS` call.  The computed indentation
   of synopsis lines after the first now also includes the width of
   anything already on the output line, so that you can precede the `SY`
   call with, for instance, the C language data type used for the return
   value in a function prototype.  The `SY` macro now accepts an
   optional second argument.  This second argument is typeset in bold,
   replaces the fixed-width space that is appended to the synopsis
   keyword in `SY`'s single-argument form, and is used in computation of
   the indentation of non-initial synopsis lines.  However, this
   computed indentation can now also be overridden with that of the
   previous synopsis item.  To do this, give any argument to the `YS`
   macro call "closing" the synopsis whose indentation you want to
   reuse.  When you're done with such a grouped synopsis, leave the
   argument off the final `YS` call.

   In a "Synopsis" section of a man page, existing synopses consisting
   of a single item require no migration.  This is the most common case.

   For others, where before you would write...

   .SY mv
   .I source
   .I destination
   .YS
   .
   .SY mv
   .I source
   \&.\|.\|.\&
   .I destination-directory
   .YS

   ...you would now write the following.

   .SY mv
   .I source
   .I destination
   .YS
   .
   .P
   .SY mv
   .I source
   \&.\|.\|.\&
   .I destination-directory
   .YS

   (That is, simply add a paragraphing macro.)

    And where before you would write...

   .SY mv
   .B \-h
   .
   .SY mv
   .B \-\-help
   .YS

    ...you would now write the following.

   .SY mv
   .B \-h
   .YS
   .
   .SY mv
   .B \-\-help
   .YS

   (That is, simply add `YS` after the first synopsis item.)

   Likely the biggest benefit of these changes is that it is now much
   easier to format C function prototypes with these macros.  Here's how
   we would synopsize a somewhat complex standard C library function.

   .B "#include <stdio.h>"
   .P
   .B void *\c
   .SY bsearch (
   .BI const\~void\~*\~ key ,
   .BI const\~void\~*\~ base ,
   .BI size_t\~ nmemb ,
   .BI int\~(* compar )\c
   .B (const\~void\~*, const\~void\~*));
   .YS

*  The an (man), doc (mdoc), and doc-old (mdoc-old) macro packages have
   changed the default line length when formatting on terminals from 78n
   to 80n.  The latter is a vastly more common device configuration, but
   that line length had been avoided since the groff 1.18 release in
   July 2002 (prior to that, the line length was 65n, as in AT&T nroff),
   for an undocumented reason.  That reason appears to have been the
   interaction of bugs in GNU tbl(1) with an aspect of grotty(1)'s
   design.  Those bugs have been resolved.  A man(1) program can still
   instruct groff to format for any desired line length by setting the
   `LL` register on {g,n,t}roff's command line.

*  The an (man) and doc (mdoc) macro packages use slightly different
   vertical margins than previously, to align more closely with the
   traditional implementations of these packages.  Per man(7) in the
   AT&T Unix System III manual (June 1980), the text area was 6.5 by 10
   inches (on typesetters).  When formatting for terminals with
   continuous rendering disabled (by default, it is enabled), the page
   footer now sets one line higher than before.

*  The an (man) and doc (mdoc) macro packages have added additional
   registers `BP`, `PO`, and `TS` for user configuration of man page
   rendering at formatting time.  As noted in groff_man(7) and
   groff_mdoc(7), documents should never manipulate these.

*  The an (man) and doc (mdoc) macro packages now support a `BP`
   register to configure the ("base") paragraph inset amount; that is
   the amount used by man(7) for paragraphs not within an `RS`/`RE`
   relative inset, and in mdoc(7) for all paragraphs.  Formerly, the
   `IN` register configured this amount with other indentation and inset
   amount parameters used by man(7).  (In mdoc(7), it had no other
   purpose.)  The base paragraph indentation default is now 5n,
   corresponding to that used by historical man(7) and mdoc(7)
   implementations going back to Unix Version 7 (1979) and 4.3BSD-Reno
   (1990), respectively.

*  The an (man) and doc (mdoc) macro packages now support a `PO`
   register to configure the page offset used by the formatter.

*  The an (man) macro package now supports a `TS` register to configure
   the minimum space required between the tag of a `TP` paragraph and
   its body.  (If the width of the tag's formatted text plus this space
   exceeds the paragraph indentation, the line is broken after the tag.)
   This parameter, formerly hard-coded as `1n`, now defaults to `2n`.

*  The an (man) macro package's `IP` macro no longer honors the formerly
   hard-coded 1n tag separation noted in the previous item.  This means
   that the first argument to the `IP` macro can abut the text of the
   paragraph with no intervening space.  If you use a word instead of
   punctuation or a list enumerator for `IP`'s first argument, consider
   migrating to `TP`.

*  The "an-ext.tmac" macro file, loaded automatically by the an (man)
   macro package, no longer defines `DS` and `DE` macros.  It had
   defined them as empty (undocumentedly) since groff 1.20 (2009).

*  The doc (mdoc) macro package's `Mt` macro now sets its argument in
   roman, not italics (or whatever the string `doc-Pa-font` was
   configured to use).  A new string, `doc-Mt-font`, for use in
   "mdoc.local" files and similar, supports configuration of this face.

*  The doc (mdoc) macro package now performs font family switches
   inline (that is, on the same output line) to Courier much less
   frequently when formatting for typesetters, affecting the `Ar`, `Cm`,
   `Er`, `Fa`, `Fd`, `Fl`, `Fn`, `Ft`, `Ic`, `Li`, and `Nm` macros.
   This change was made to reduce the ambiguity of space widths when
   typesetting the monospaced Courier and proportional Times fonts
   adjacently.  Bear in mind that you can use the "mdoc.local" file to
   customize the font used to render nearly any mdoc(7) macro's
   arguments; this mechanism has been in place since 1992.

*  The doc (mdoc) macro package's `Ql` macro now operates more simply;
   it no longer (ever) quotes its arguments when formatting for
   typesetters.  In practice, it does not seem difficult to distinguish
   even single characters in Courier from those in Times.  (If it is, an
   _explicit_ quoting macro like `Sq` or `Dq` should be used.)

*  The doc (mdoc) macro package's `Lk`, `Mt`, and `Xr` macros now
   produce hyperlinks on HTML, PDF, and terminal devices.  See above
   regarding hyperlink support being enabled by default.

*  The doc (mdoc) macro package now honors the `U` register and `MF`
   string as the an (man) package does.

*  The new macro file "koi8-r.tmac" supports the KOI8-R character
   encoding, which supports the new Russian locale for groff.

*  The m (mm) macro package now uses a 3v bottom margin rather than 2v.
   (Using the default type size and vertical spacing, the result is a
   half-inch margin, just like the existing top margin.)  When
   formatting for terminals, content aligned to the bottom of the page
   (footers, footnotes, `BS`/`BE` bottom blocks, and similar) now sets
   one line higher than before.  Further, the margin between the body
   text and any page footers is now 2v, like that between the body text
   and page headers, not 1v.

*  The m (mm) macro package's `Limsp` register (a GNU extension) has
   been removed; see the item regarding the `LI` macro below.

*  The m (mm) macro package's `Le` register now defaults to `1`,
   consistently with the `Lf`, `Lt`, and `Lx` registers of similar
   purpose, but inconsistently with DWB 3.3 mm.  Explicitly assigning
   the `Le` register in a document's preamble works as it always has.

*  The m (mm) macro package's `AST` macro (a GNU extension) is
   deprecated, warns upon usage, and is slated for withdrawal in a
   future release.  Assign to the new string `Abstract` instead.

*  The m (mm) macro package's `ISODATE` macro (a GNU extension) is
   deprecated, warns upon usage, and is slated for withdrawal in a
   future release.  Assign to the new register `Isodate` instead.

*  The m (mm) macro package's `EPIC` macro (a GNU extension) now
   interprets its "width" argument in ens by default, and its "height"
   argument in vees, instead of basic units, for consistency with the
   rest of the package.

*  Similarly, the m (mm) macro package's `PIC` macro (a GNU extension)
   now interprets an argument to its `-I` option in ens instead of ems
   by default.

*  The m (mm) macro package no longer superscripts _and_ brackets a
   reference mark (the `Rf` string).  Instead, the new `Rfstyle`
   register controls its formatting.  The default, 0, selects bracketing
   in nroff mode and superscripting in troff mode.  Set `Rfstyle` to 3
   in a document to obtain groff mm's previous mark formatting behavior.

*  The m (mm) macro package's `Li` register now defaults to 5 ens (not
   6) to align with the `Pi` register default.

*  The m (mm) macro package's `Li` register now configures the text
   indentation of items in `RL` lists (as it long has for `AL` lists)
   instead of hard-coding a value of 6 ens as DWB 3.3 mm does.

*  The m (mm) macro package's `BVL` (a GNU extension) and `VL` macros'
   first arguments are now optional.  If omitted, the paragraph
   indentation amount (register `Pi`) is used for list items' text
   indentations.

*  The m (mm) macro package's `DL` macro now uses the `EM` string as the
   mark instead of an em dash special character literal.  (The latter
   remains the default definition of the `EM` string.)

*  The m (mm) macro package's `DS` macro now interprets its third
   argument (a right-hand indentation) in ens by default, for
   consistency with the rest of the package.  This is a difference from
   DWB mm (which passed the value unprocessed to the `ll` request, which
   itself uses ems), and groff mm's own historical behavior, which used
   basic units.

*  The m (mm) macro package's `HU` macro now supports an optional second
   argument as a GNU extension.  It corresponds to the optional third
   argument of the `H` macro.

*  The m (mm) macro package's `IND` macro (a GNU extension), now calls
   `SK` only if no `TXIND` macro is defined, instead of performing this
   action as part of the fallback when no `TYIND` macro is defined.

*  The m (mm) macro package now supports a user-definable hook macro
   `AFX`, which if defined is called by `AF` in lieu of the latter's
   normal operation.  Applications include customization of letterhead.

*  The m (mm) macro package now supports a user-definable hook macro
   `RPX`, which if defined is called by `RP` in lieu of the latter's
   normal operation (breaking the page [potentially], and formatting the
   reference list caption string `Rp`).

*  The m (mm) macro package's `LI` macro now interprets its second
   argument as a Boolean value indicating whether a space should
   separate the list item mark from its prefix (the first argument).
   Thus, where you formerly specified "2" to indicate no such
   separation, you would now use "0", matching the semantics of the
   former `Limsp` register.  "2" continues to be recognized and handled
   as before, but prompts a warning; migrate your documents.

*  The m (mm) macro package now supports an `Aumt` string to suppress
   the appearance of positional arguments to the `AU` macro in the
   document heading used by memorandum types 0-3 and 6.  By default, all
   such arguments appear, except the second (author initials).  For
   example, a value of "3 4" more accurately reproduces London &
   Reiser's 1978 paper describing the porting of Unix to the VAX-11/780.

*  The m (mm) macro package now supports an `Rpfmt` string specifying
   the `LB` macro arguments that the package uses to format the items in
   an `RP` reference list.

*  The m (mm) macro package now supports the `E` register as DWB mm did.

*  The m (mm) macro package now supports DWB mm's `Rg` string.

*  The m (mm) macro package's `nP` macro now behaves more like DWB mm's.
   It applies a temporary indentation to the second output line of a
   paragraph to align it with the start of the paragraph text (not the
   tag/label) in the first, and resets the paragraph counter when the
   first- or second-level section heading number increments.

*  The m (mm) macro package's `Iso` register is now named `Isodate` to
   make its meaning less ambiguous.  The old name remains as an alias.

*  The m (mm) macro package's `Rpe` register is now named `Rpej` for
   better symmetry with `Ej`.  The old name remains as an alias.

*  The m (mm) macro package has renamed several strings to make their
   purposes less obscure; they determine the content of captions, not
   list items.
     `Licon` -> `Captc`
     `Liec`  -> `Capec`
     `Liex`  -> `Capex`
     `Lifg`  -> `Capfg`
     `Litb`  -> `Captb`
   The old names remain as aliases.

*  The m (mm) macro package has renamed the `Tcst` string to `Tcstatus`
   to make its purpose less obscure.  The old name remains as an alias.

*  The m (mm) macro package recognizes new register names `Ftnum` and
   `Rfnum` for the automatically incrementing footnote and reference
   counters.  The old, DWB-compatible but cryptic, names `:p` and `:R`
   remain supported.

*  The s (ms) macro package now sets the vertical spacing register
   defaults for normal (`VS`) and footnote (`FVS`) text to 120% of the
   type size configured in the `PS` and `FPS` registers, respectively,
   rather than 2 points larger, to comport with generally accepted
   typesetting principles.  Thus, when formatting a document with a type
   size of 20 points, the vertical spacing now defaults to 24 points
   rather than 22.

*  The s (ms) macro package now subtracts one vee from the footer trap
   location computed using the `FM` register.  When using the default
   `FM` value of `1i`, this makes the size of the margin from the footer
   baseline to the bottom of the page 3 vees or one half-inch,
   consistently with that between the header baseline and the page top.
   While a bug fix, and consistent with DWB 3.3 ms, this computation is
   inconsistent with Seventh Edition Unix ms and Heirloom Doctools ms.
   When formatting for terminals, footers now set one line higher than
   before.  The size of the footnote area is not affected; instead there
   is a 1v smaller margin between its bottom and the footer baseline.

Output drivers
--------------

*  grohtml(1), the (X)HTML output driver, supports a new `-k` command-
   line option that takes a mandatory argument, either "ascii" or
   "utf-8", which it recognizes case-insensitively.  This feature
   configures representation of character entities in the output.  Based
   on work by TANAKA Takuji.

*  gropdf(1), the PDF output driver, now allows embedding of JFIF/JPEG
   and JPEG 2000 image file formats.  If PerlMagick is installed, many
   more image file formats, including PNG, PAM, and GIF, can be
   embedded.  See also the item regarding `PDFPIC` above.  Thanks to
   Deri James.

*  gropdf now supplies its own "SS" (slanted symbol) font to improve
   rendering of documents requiring slanted lowercase Greek letters,
   such as those employing the eqn(1) preprocessor.  groff supplies the
   font in PFB format, and gropdf automatically embeds it, as it is not
   a standard PDF font.  Formerly, groff's "pdf.tmac" file defined
   fallback characters for lowercase Greek letters, applying a slant of
   16 degrees to the upright glyphs available in the standard symbol
   font "S".  That technique produced glyphs slightly larger than those
   in grops's "SS" font.  Thanks to Deri James.

*  gropdf now subsets embedded fonts by default, meaning that it stores
   only the glyphs a document actually uses.  Font subsetting usually
   reduces the size of the PDF gropdf creates.  Thanks to Deri James.

*  gropdf supports a new `--opt` command-line option, permitting a few
   features, including font subsetting, to be selectively enabled.
   Thanks to Deri James.

*  gropdf now emits PDFs that conform to the PDF 1.7 standard (also
   known as ISO 32000).  Its new `--pdfver` command-line option permits
   production of PDF 1.4-conformant output instead.  Thanks to Deri
   James.

*  gropdf supports a new `pdf: pagenumbering` device extension command
   and `pdfpagenumbering` convenience macro, allowing control of the
   page numbers in a PDF reader's overview panel.  It is common for a
   document to number early pages with Roman numerals and then restart
   page enumeration at decimal 1 for its main matter.  Thanks to Deri
   James.

*  gropdf now offers its own implementations of the "pdfmark" macro
   package's "pdfhref" and other macros, supporting internal (bookmarks,
   named destinations) and external (URL) hyperlinks, and the
   specification of hotspots for link text.  For example, when bundling
   multiple man pages into a collection, as the supplied
   groff-man-pages.pdf document and the Linux man-pages project do,
   references to man pages within the collection are supported with
   internal hyperlinks, and those outside with external ones.  Thanks to
   Deri James.

*  gropdf now supports characters outside the Unicode Basic Latin subset
   in bookmarks, named destinations, and external hyperlinks.  (They
   must be encoded using groff's Unicode special character escape
   sequences; the preconv preprocessor is helpful to simply this
   requirement.)  Thanks to Deri James.

*  gropdf now recognizes a `GROPDF_OPTIONS` environment variable,
   interpreting it as a space-separated list of command-line options.
   Explicit command-line options override any settings from this
   environment variable.  You can use this variable to obviate passing
   options to gropdf via groff's `-P` option.  Thanks to Deri James.

*  grops(1), the PostScript output driver, now supports fonts encoded
   using UTF-16.  Indicate the encoding by including the string
   "-UTF16-" within the font's name as specified by the "internalname"
   directive in its font description file.  Thanks to TANAKA Takuji.

*  The PostScript output driver grops(1) no longer accepts spaces as
   field separators in its "download" file; this is so that spaces can
   appear in font file names, and to better align the syntax of this
   file with that used by gropdf(1).  The download file for grops
   shipped by groff has long used tabs rather than spaces for field
   separation.

*  The PostScript output driver grops(1)'s macro file "ps.tmac" no
   longer defines fallback special characters `\[S ,]` and `\[S ,]` to
   simulate support for what Unicode calls LATIN {CAPITAL,SMALL} LETTER
   S WITH COMMA BELOW.  The file's definition constructed these glyphs
   by overstriking the Basic Latin "S" (or "s") with a cedilla accent,
   which is regarded as less orthographically acceptable than in the
   past.  A user's document or macro file can still do exactly what
   "ps.tmac" used to.

     .fchar \[S ,] \o'S\[ac]'
     .hcode \[S ,]s
     .fchar \[s ,] \o's\[ac]'
     .hcode \[s ,]s

*  The PostScript output driver grops(1) once again accepts a file name
   containing slashes as a document prolog or resource (such as a font
   to be downloaded into the document).  This is a restoration of groff
   1.22.4 and earlier behavior; groff's 1.23.0 change of not accepting a
   file name containing slashes as an encoding or font description
   remains in place.  (We impose this restriction because the output
   driver interprets the contents of these files; it does not interpret
   the PostScript prolog or resource files.)

*  grotty(1) now supports devices recognizing ECMA-48/ISO 6429 SGR 38
   and 48 escape sequences that select RGB colors using 8 bits per color
   channel.  A new command-line option, `-t`, configures emission of
   these escape sequences instead of the SGR 30-37 and 40-47 sequences
   supporting 3- or 4-bit color.  Thanks to Deri James.

   Example:

   $ groff -T utf8 -P -t <<EOF
   .defcolor pink rgb #ffc0cb
   .defcolor springgreen rgb #00ff7f
   Hello, \f[B]\m[pink]colorful \m[springgreen]world\m[default]\f[]!
   .pl \n[nl]u
   EOF

*  gxditview(1), the X11 output driver and document previewer, now
   accepts the option `-v` as a synonym of `--version` (and `-version`).
   This change aligns it with other groff output drivers, and makes it
   work correctly with "groff -vX".

Utilities
---------

*  afmtodit now recognizes a '-q' option to suppress diagnostics
   reporting duplicate mappings in favor of a count thereof, and the
   "BuildFoundries" script uses it.  Recent versions of the URW fonts
   have tons of duplicate mappings (for groff's purposes) and to our
   knowledge these are all harmless.

*  grog no longer supports the `--ligatures` and `--run` options.
   Simulate the former (which was specific to the "pdf" output device)
   with the option sequence "-P -U -P y", and the latter by using the
   command substitution feature of your shell; see section "Examples" of
   groff(1).

*  groff now offers install-font.bash, a shell script that interactively
   assists the configuration of fonts for use with the GNU troff
   formatter and the gropdf and grops output drivers.  For now, it is
   provided as an example, as it lacks a man page.  You can change to
   its directory and run "bash install-font.bash -H" for a man page-like
   description of its features and operation.

Miscellaneous
-------------

*  The contributed programs gperl and gpinyin no longer accept
   abbreviated forms of the long options `--help` and `--version`.  The
   respective synonymous short options `-h` and `-v` remain.

*  Font description files now support a variant of the "charset"
   directive: "charset-range" works like the existing "charset"
   directive except that the glyph descriptions use a `name` of the form
   "uEEEE..uFFFF" (where "EEEE" and "FFFF" are hexadecimal digit
   sequences), and apply the metrics identically to all glyphs in the
   designated range.  Thanks to TANAKA Takuji.

*  groff now ships font description files usable with the "ps", "html",
   "xhtml", and "utf8" output devices to support East Asian fonts.
   (Caveat: with few exceptions, groff does not ship font files
   themselves.)  These are intended as abstractions of faces to permit
   consistent naming while allowing custom font selections, just as with
   the 12 text typefaces supported across output devices for Latin
   scripts in groff (three families of four styles each).  These CJK
   font descriptions are not organized into groff font families, but are
   similarly arranged.

      CSH: Simplified Chinese, Hei style
      CSS: Simplified Chinese, Song style
      CTH: Traditional Chinese, Hei style
      CTS: Traditional Chinese, Song style
      JPG: Japanese, Gothic style
      JPM: Japanese, Mincho style
      KOG: Korean, Gothic style
      KOM: Korean, Mincho style

   Thanks to TANAKA Takuji.

*  The commands addftinfo, grodvi, post-grohtml, grolbp, grolj4, grops,
   grotty, eqn, pre-grohtml, gxditview, pic, preconv, refer, soelim,
   tbl, groff, troff, hpftodit, indxbib, lkbib, lookbib, tfmtodit, and
   xtotroff now exit with status 2 instead of 1 on usage errors.  grn
   now exits with status 2 on a usage error instead of a successful
   status (0).

*  Support for terminal devices using the CCSID 1047 (EBCDIC) encoding
   has been withdrawn.  This change partially clears the way for GNU
   troff to interpret UTF-8 input directly (without preconv(1)
   preprocessor usage) in the future.  Use iconv(1) to convert a code
   page 1047 document to US-ASCII or ISO Latin-1 prior to its input to
   GNU troff.  preconv(1), and therefore groff(1)'s `-k` and `-K`
   options, can do this as well if preconv is built with iconv support.
   Use `preconv -v` to determine this fact.

*  groff's "configure" script now tries harder to determine an
   appropriate paper format for the system; its output reports how it
   made its determination.  Any existing "/etc/papersize" file is one of
   the resources it consults.

*  groff's "configure" script now supports a "--without-urw-fonts"
   option, for use on systems where the URW replacement fonts for
   PostScript and PDF standard fonts are unavailable or not desired.  It
   also silences the lengthy warning the script issues when these fonts
   and their metric files are not found.  Configuring without URW font
   support reduces the gropdf(1) output driver's functionality; see
   subsection "Feature service levels and URW font support" of that man
   page for details.

*  You can now specify any paper format you like--including the file
   specification "/etc/papersize" for systems using "libpaper"--as the
   default that the groff build writes to generated device description
   files ("DESC") for the "dvi", "lbp", "lj4", "pdf", and "ps" output
   drivers.  (The paper format must still be valid; see groff_font(5).)

     Example: ./configure PAGE=/etc/papersize --prefix=/opt/gnu

*  Building groff no longer requires the PSUtils package.

*  Building groff no longer requires the makeinfo command.  Since groff
   1.23.0, we ship groff's Texinfo manual in several formats as part of
   groff's distribution archive.  We ask that distributors provide their
   users with all formats appropriate to the platform (GNU Info, HTML,
   plain text, TeX DVI, and PDF).  Thanks to onf.

*  Polish language input documents are now supported, including
   hyphenation patterns from the CTAN project and localized strings
   for the man, ms, me, mm, and mom packages.  Thanks to Dariusz
   Chilimoniuk.

*  Russian language input documents using the KOI8-R encoding are now
   supported, including hyphenation patterns from the ruhyphen project
   and localized strings for the man, ms, me, mm, and mom packages.
   Thanks to Nikita Ivanov.

*  Spanish language input documents are now supported, including
   hyphenation patterns from the hyph-utf8 project and localized strings
   for the man, ms, me, mm, and mom packages.  Thanks to Eloi Monta<F1><E9>s.

*  The localization macro files now set up an appropriate hyphenation
   mode default.  For Chinese and Japanese, this is zero.

*  If groff programs have their current time overridden by the
   SOURCE_DATE_EPOCH environment variable, then that time is always
   displayed in UTC.  That environment variable is normally only set
   when specifically requesting build systems to produce reproducible
   output, and it is useful for reproducibility test harnesses to vary
   the TZ environment variable and ensure that it does not affect the
   output of the build; those harnesses have no way to set TZ=UTC only
   for groff programs.  People setting SOURCE_DATE_EPOCH are likely to
   be more in the "system programmer" camp as described in the release
   notes for 1.23.0, so it is easier to defend time-zone-invariant
   output to them.  In all other cases, the current time remains
   displayed in local time.  Thanks to Colin Watson.

*  The minimum version of Perl required to build groff is now 5.8 (18
   July 2002), incremented from 5.6.1.

*  groff now looks for the Netpbm program pamcut(1) rather than
   pnmcut(1).  Per its developers, the former was introduced in 2001
   ago and the latter withdrawn in 2009.

*  The Makefile macro `DEVICE` has been renamed to `DEFAULT_DEVICE`; be
   aware if your builds don't use "ps" as the default output device.

*  The groff_diff(7) man page no longer contains examples.  They remain
   in groff's Texinfo manual.

*  groff's Texinfo manual now adapts its content to the groff command
   prefix configured at build time.  If the build is configured without
   a leading "g"--omitting it has been groff's default for many years,
   possibly forever--then our Texinfo manual now omits that prefix when
   mentioning the affected commands (all replacements for AT&T troff
   commands).  This way, if you select a command prefix, say "limbo",
   and rebuild the Texinfo manual, the manual reflects the prefix used
   by your build configuration, and talks about "limboeqn",
   "limbotroff", "limborefer", and so on.

Revision 1.103: download - view: text, markup, annotated - select for diffs
Tue Jun 30 08:12:08 2026 UTC (4 months, 2 weeks ago) by wiz
Branches: MAIN
Diff to: previous 1.102: preferred, colored
Changes since revision 1.102: +1 -9 lines
groff: clean up

Remove references to non-existent files, and REPLACE_* for files
that don't have an interpreter line. NFCI

Revision 1.102: download - view: text, markup, annotated - select for diffs
Wed Jan 29 10:31:53 2025 UTC (21 months, 2 weeks ago) by jperkin
Branches: MAIN
CVS tags: pkgsrc-2026Q2-base, pkgsrc-2026Q2, pkgsrc-2026Q1-base, pkgsrc-2026Q1, pkgsrc-2025Q4-base, pkgsrc-2025Q4, pkgsrc-2025Q3-base, pkgsrc-2025Q3, pkgsrc-2025Q2-base, pkgsrc-2025Q2, pkgsrc-2025Q1-base, pkgsrc-2025Q1
Diff to: previous 1.101: preferred, colored
Changes since revision 1.101: +2 -1 lines
groff: Fix another regression in previous update.

an.tmac was changed to load an.tmac, causing infinite loops.  Revert back to
loading andoc.tmac as per previous version.  Fixes build of e.g. enchant2.

Bump PKGREVISION.

Revision 1.101: download - view: text, markup, annotated - select for diffs
Mon Jan 13 06:31:28 2025 UTC (22 months ago) by wiz
Branches: MAIN
Diff to: previous 1.100: preferred, colored
Changes since revision 1.100: +2 -3 lines
groff: fix a pkglint warning

Revision 1.100: download - view: text, markup, annotated - select for diffs
Fri Jan 10 03:21:20 2025 UTC (22 months ago) by ktnb
Branches: MAIN
Diff to: previous 1.99: preferred, colored
Changes since revision 1.99: +2 -3 lines
groff: update to 1.23.0

- Major documentation overhaul
- Many bug fixes and improvements

Revision 1.99: download - view: text, markup, annotated - select for diffs
Mon Aug 14 05:25:22 2023 UTC (3 years, 3 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2024Q4-base, pkgsrc-2024Q4, pkgsrc-2024Q3-base, pkgsrc-2024Q3, pkgsrc-2024Q2-base, pkgsrc-2024Q2, pkgsrc-2024Q1-base, pkgsrc-2024Q1, pkgsrc-2023Q4-base, pkgsrc-2023Q4, pkgsrc-2023Q3-base, pkgsrc-2023Q3
Diff to: previous 1.98: preferred, colored
Changes since revision 1.98: +2 -2 lines
*: recursive bump for Python 3.11 as new default

Revision 1.98: download - view: text, markup, annotated - select for diffs
Thu Jun 1 16:28:16 2023 UTC (3 years, 5 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2023Q2-base, pkgsrc-2023Q2
Diff to: previous 1.97: preferred, colored
Changes since revision 1.97: +2 -2 lines
*: switch to py-pspdfutils instead of psutils

Revision 1.97: download - view: text, markup, annotated - select for diffs
Tue Jun 28 11:36:10 2022 UTC (4 years, 4 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2023Q1-base, pkgsrc-2023Q1, pkgsrc-2022Q4-base, pkgsrc-2022Q4, pkgsrc-2022Q3-base, pkgsrc-2022Q3
Diff to: previous 1.96: preferred, colored
Changes since revision 1.96: +2 -2 lines
*: recursive bump for perl 5.36

Revision 1.96: download - view: text, markup, annotated - select for diffs
Mon May 24 19:54:24 2021 UTC (5 years, 5 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2022Q2-base, pkgsrc-2022Q2, pkgsrc-2022Q1-base, pkgsrc-2022Q1, pkgsrc-2021Q4-base, pkgsrc-2021Q4, pkgsrc-2021Q3-base, pkgsrc-2021Q3, pkgsrc-2021Q2-base, pkgsrc-2021Q2
Diff to: previous 1.95: preferred, colored
Changes since revision 1.95: +2 -2 lines
*: recursive bump for perl 5.34

Revision 1.95: download - view: text, markup, annotated - select for diffs
Mon Aug 31 18:11:42 2020 UTC (6 years, 2 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2021Q1-base, pkgsrc-2021Q1, pkgsrc-2020Q4-base, pkgsrc-2020Q4, pkgsrc-2020Q3-base, pkgsrc-2020Q3
Diff to: previous 1.94: preferred, colored
Changes since revision 1.94: +2 -2 lines
*: bump PKGREVISION for perl-5.32.

Revision 1.94: download - view: text, markup, annotated - select for diffs
Fri Apr 3 19:47:00 2020 UTC (6 years, 7 months ago) by jperkin
Branches: MAIN
CVS tags: pkgsrc-2020Q2-base, pkgsrc-2020Q2
Diff to: previous 1.93: preferred, colored
Changes since revision 1.93: +2 -2 lines
groff: Now requires yacc due to ypp patch.

Revision 1.93: download - view: text, markup, annotated - select for diffs
Sat Jan 18 23:35:26 2020 UTC (6 years, 9 months ago) by rillig
Branches: MAIN
CVS tags: pkgsrc-2020Q1-base, pkgsrc-2020Q1
Diff to: previous 1.92: preferred, colored
Changes since revision 1.92: +2 -2 lines
all: migrate several HOMEPAGEs to https

pkglint --only "https instead of http" -r -F

With manual adjustments afterwards since pkglint 19.4.4 fixed a few
indentations in unrelated lines.

This mainly affects projects hosted at SourceForce, as well as
freedesktop.org, CTAN and GNU.

Revision 1.92: download - view: text, markup, annotated - select for diffs
Mon Nov 4 21:45:55 2019 UTC (7 years ago) by rillig
Branches: MAIN
CVS tags: pkgsrc-2019Q4-base, pkgsrc-2019Q4
Diff to: previous 1.91: preferred, colored
Changes since revision 1.91: +2 -2 lines
textproc: align variable assignments

pkglint -Wall -F --only aligned --only indent -r

No manual corrections.

Revision 1.91: download - view: text, markup, annotated - select for diffs
Mon Nov 4 21:43:36 2019 UTC (7 years ago) by rillig
Branches: MAIN
Diff to: previous 1.90: preferred, colored
Changes since revision 1.90: +3 -3 lines
textproc: align variable assignments

pkglint -Wall -F --only aligned --only indent -r

No manual corrections.

Revision 1.90: download - view: text, markup, annotated - select for diffs
Sun Aug 11 13:23:24 2019 UTC (7 years, 3 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2019Q3-base, pkgsrc-2019Q3
Diff to: previous 1.89: preferred, colored
Changes since revision 1.89: +2 -2 lines
Bump PKGREVISIONs for perl 5.30.0

Revision 1.89: download - view: text, markup, annotated - select for diffs
Fri May 24 16:14:44 2019 UTC (7 years, 5 months ago) by ryoon
Branches: MAIN
CVS tags: pkgsrc-2019Q2-base, pkgsrc-2019Q2
Diff to: previous 1.88: preferred, colored
Changes since revision 1.88: +3 -2 lines
It seems that libiconv is not needed. Bump PKGREVISION

Revision 1.88: download - view: text, markup, annotated - select for diffs
Mon Apr 1 16:48:37 2019 UTC (7 years, 7 months ago) by ryoon
Branches: MAIN
Diff to: previous 1.87: preferred, colored
Changes since revision 1.87: +7 -4 lines
Update to 1.22.4

Changelog:
VERSION 1.22.4
==============

Troff
-----

o The `hy' request has been extended.  Value 16 enables hyphenation before
  the last character, and value 32 enables hyphenation after the first
  character.


PDFPIC
------

o PDFPIC has been corrected so the behaviour is the same whether you use the
  PostScript or PDF drivers.  However, this means that any documents which
  were written using the old behaviour will not be rendered correctly if
  using the PDF driver with the new version.

  The change would mean that documents which relied on the previous
  behaviour are likely to have a gap underneath the image which was not
  there before.  If you see this effect there are three ways you can restore
  the previous behaviour:

  Add the line ".nr PDFPIC_NOSPACE 1" to the document before the first call
  to .PDFPIC.

  If it is just a single document which exhibits this behaviour you can run
  groff adding "-rPDFPIC_NOSPACE=1" to the command line.

  If you have many documents which rely on the previous behaviour you can
  set an environment variable "export GROFF_PDFPIC_NOSPACE=1" which will
  restore the previous behaviour for all runs.

  Note that this change has no effect if you were using .PDFPIC with the
  PostScript driver--only if you used it with the PDF driver.


Gropdf
------

o Type 1 font loading is fixed to handle newer Ghostscript versions.

o Handling of glyphs above position 255 is improved to allow many more
  glyphs to be used.

o New macros .pdftransition and .pdfpause are introduced to allow creation
  of presentation slides.  Partially backward-compatible with present.tmac,
  specifically the PAUSE, BLOCKS and BLOCKE commands.  Supports all the
  transition types introduced in PDF v1.5 (see the gropdf man page).


Miscellaneous
-------------

o A new 'configure' option --with-compatibility-wrappers controls how groff
  compatibility wrappers for vendor-provided non-GNU macro sets are
  installed (see ./configure --help).

o eqn2graph, grap2graph, and pic2graph now attempt to adapt to very old
  installed versions of the ImageMagick and GraphicsMagick programs
  "convert".  They search the output of convert's "-help" option, and use
  "-trim" if that string is found; otherwise, the old "-crop 0x0" method
  (which produces incompatible results on versions that _do_ support
  "-trim") is used.  The programs emit a warning to standard error if the
  search fails and the old method is used.

o eqn2graph no longer supports the "-unsafe" option.  It did nothing.

o groffer now supports the output of XHTML.  Use the "--xhtml" or
  "--mode=xhtml" command-line options to generate it.

o Much work has been done, and is ongoing, to make groff's man pages better
  examples for man page writers to follow.  groff_man(7) itself has been
  expanded and largely rewritten to more precisely document the macro
  package's behavior and to be more helpful and accessible to man page
  writers who may never read any other groff documentation.

Revision 1.87: download - view: text, markup, annotated - select for diffs
Wed Aug 22 09:46:45 2018 UTC (8 years, 2 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2019Q1-base, pkgsrc-2019Q1, pkgsrc-2018Q4-base, pkgsrc-2018Q4, pkgsrc-2018Q3-base, pkgsrc-2018Q3
Diff to: previous 1.86: preferred, colored
Changes since revision 1.86: +2 -2 lines
Recursive bump for perl5-5.28.0

Revision 1.86: download - view: text, markup, annotated - select for diffs
Tue Aug 1 15:09:53 2017 UTC (9 years, 3 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2018Q2-base, pkgsrc-2018Q2, pkgsrc-2018Q1-base, pkgsrc-2018Q1, pkgsrc-2017Q4-base, pkgsrc-2017Q4, pkgsrc-2017Q3-base, pkgsrc-2017Q3
Diff to: previous 1.85: preferred, colored
Changes since revision 1.85: +1 -3 lines
Switch from mdocml to mandoc; remove obsolete references.

Revision 1.85: download - view: text, markup, annotated - select for diffs
Wed Jan 18 13:44:46 2017 UTC (9 years, 9 months ago) by leot
Branches: MAIN
CVS tags: pkgsrc-2017Q2-base, pkgsrc-2017Q2, pkgsrc-2017Q1-base, pkgsrc-2017Q1
Diff to: previous 1.84: preferred, colored
Changes since revision 1.84: +2 -2 lines
Update PLIST.{,docs} in order to fix building of groff without the `groff-docs'
option.
Bump PKGREVISION

Noticed by and thanks to Hiroshi Hakoyama via PR pkg/51896.

Revision 1.84: download - view: text, markup, annotated - select for diffs
Wed Aug 3 10:31:28 2016 UTC (10 years, 3 months ago) by leot
Branches: MAIN
CVS tags: pkgsrc-2016Q4-base, pkgsrc-2016Q4, pkgsrc-2016Q3-base, pkgsrc-2016Q3
Diff to: previous 1.83: preferred, colored
Changes since revision 1.83: +2 -2 lines
Instead of using find(1) in font/devpdf/Makefile.sub just use grep(1) following
what upstream does (`-maxdepth' option can be problematic on some platforms).

Should fix pkg/51332 reported by Hiroshi Hakoyama

From <maya>

Revision 1.83: download - view: text, markup, annotated - select for diffs
Sat Jul 9 06:39:05 2016 UTC (10 years, 4 months ago) by wiz
Branches: MAIN
Diff to: previous 1.82: preferred, colored
Changes since revision 1.82: +2 -2 lines
Bump PKGREVISION for perl-5.24.0 for everything mentioning perl.

Revision 1.82: download - view: text, markup, annotated - select for diffs
Thu Apr 21 08:35:46 2016 UTC (10 years, 6 months ago) by jperkin
Branches: MAIN
CVS tags: pkgsrc-2016Q2-base, pkgsrc-2016Q2
Diff to: previous 1.81: preferred, colored
Changes since revision 1.81: +3 -3 lines
Use PKGMANDIR.

Revision 1.81: download - view: text, markup, annotated - select for diffs
Sat Oct 3 07:45:26 2015 UTC (11 years, 1 month ago) by richard
Branches: MAIN
CVS tags: pkgsrc-2016Q1-base, pkgsrc-2016Q1, pkgsrc-2015Q4-base, pkgsrc-2015Q4
Diff to: previous 1.80: preferred, colored
Changes since revision 1.80: +8 -8 lines
Fix symlinks to not be relative and ride last PKGREVISION bump

Revision 1.80: download - view: text, markup, annotated - select for diffs
Fri Oct 2 11:33:14 2015 UTC (11 years, 1 month ago) by richard
Branches: MAIN
Diff to: previous 1.79: preferred, colored
Changes since revision 1.79: +26 -7 lines
gnu updates for groff with special fixup for chem.1 manpage not g' prefixed
add dependency to gtexinfo when building docs
remove special SunOS processing which seems unnecessary now.

TODO: there are still some apparent fonts issues indicated in the build logs

Revision 1.79: download - view: text, markup, annotated - select for diffs
Fri Jun 12 10:51:20 2015 UTC (11 years, 5 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2015Q3-base, pkgsrc-2015Q3, pkgsrc-2015Q2-base, pkgsrc-2015Q2
Diff to: previous 1.78: preferred, colored
Changes since revision 1.78: +2 -1 lines
Recursive PKGREVISION bump for all packages mentioning 'perl',
having a PKGNAME of p5-*, or depending such a package,
for perl-5.22.0.

Revision 1.78: download - view: text, markup, annotated - select for diffs
Sun Mar 8 23:29:23 2015 UTC (11 years, 8 months ago) by joerg
Branches: MAIN
CVS tags: pkgsrc-2015Q1-base, pkgsrc-2015Q1
Diff to: previous 1.77: preferred, colored
Changes since revision 1.77: +2 -1 lines
Fix config.guess/config.sub overrides.

Revision 1.77: download - view: text, markup, annotated - select for diffs
Sat Jan 17 12:10:01 2015 UTC (11 years, 10 months ago) by wiedi
Branches: MAIN
Diff to: previous 1.76: preferred, colored
Changes since revision 1.76: +2 -2 lines
SunOS needs __EXTENSIONS__

Revision 1.76: download - view: text, markup, annotated - select for diffs
Thu Jan 8 09:02:27 2015 UTC (11 years, 10 months ago) by wiz
Branches: MAIN
Diff to: previous 1.75: preferred, colored
Changes since revision 1.75: +6 -13 lines
Update to 1.22.3:

VERSION 1.22.3
==============

Gxditview
---------

o X11 resources for `gxditview', which were previously installed in
  /usr/X11/lib/X11/app-defaults no matter which `prefix' was set, are
  now installed in appresdir=$prefix/lib/X11/app-defaults.  If
  `appresdir' is not a standard X11 resource directory, the environment
  variable XFILESEARCHPATH should be set to this path.  The standard
  default directories depends on the system `libXt'.  Common directories
  include:

   /usr/lib/X11/app-defaults
   /usr/share/X11/app-defaults
   /etc/X11/app-defaults

  Note that if the option `--with-appresdir' is passed to `configure',
  the `prefix' will not be added to `appresdir'.


Glilypond
---------

o This new preprocessor (contributed by Bernd Warken) allows embedding of
  code for GNU LilyPond (http://www.lilypond.org), a music typesetter.  The
  data gets automatically processed and embedded as EPS images.


Gperl
-----

o Bernd Warken contributed a new preprocessor to handle Perl code that can
  be evaluated and then processed by groff.


Gpinyin
-------

o Another preprocessor from Bernd Warken to pretty-print Pinyin syllables
  like `guo2wang2' as `guówáng'.


Pdfroff
-------

o The pdfroff utility script now activates its `--no-toc-relocation' option
  by default, unless a request similar to:

     .if !\n[PHASE] .tm pdfroff-option:set toc_relocation=enabled

  is invoked during input file processing; (`.if !\n[PHASE] ...' ensures
  that the effect of the `.tm' request is restricted to the document setup
  phase of processing, as pdfroff sets it to 1 or 2 in the output phase,
  but leaves it unset in the setup phase).

  The bundled `spdf.tmac' macro package, which implicitly activates
  `-mpdfmark' for `ms' macro users, ensures that TOC relocation is
  appropriately enabled, when the `.TC' macro is invoked.


Macro Packages
--------------

o The -mom macro package now has full support for eqn, pic, and tbl, as well
  as captioning and labelling of pdf images and preprocessor output.  Lists
  of Figures, Equations, and Tables can now be autogenerated.  PDF_IMAGE has
  a new FRAME option.

o A French introduction to the -me macro package has been added (file
  `meintro_fr.me').

o In -mdoc, command %C is now available, providing a city or place
  reference.


VERSION 1.22.2
==============

Tbl
---

o The character `#' can now be used as an eqn delimiter within tables.


Eqn
---

o A GNU extension

    delim on

  has been added to reactivate delimiters which have been disabled with
  `delim off'.


VERSION 1.22.1
==============

(There was no release 1.22.)

Groff
-----

o A new option `-j' has been added to call the `chem' preprocessor.

Tbl
---

o Improved line numbering support.

Macro Packages
--------------

o Support for the `refer' preprocessor has been added to the -mm macro
  package.

o In -me, the `TH' macro was changed for compatibility with line number
  support in tables.

  `bl' now works inside of blocks.

  The behaviour of centered blocks has been improved.

  Line numbering support has been improved.

o The -mom macro package has reached version 2.0, focusing on PDF output
  with gropdf (using the new `pdfmom' wrapper script).  See the file
  `version-2.html' of the -mom documentation for a list of the many changes.

o Some generic Unicode fallback characters (mainly Roman numerals) have been
  added.

Gropdf
------

o A new driver for generating PDF output directly, contributed by Deri James
  <deri@chuzzlewit.myzen.co.uk>.  Note that this driver is written in Perl,
  thus you need a working Perl installation to run this output device.

Pdfmom
------

o A new wrapper around groff that facilitates the production of PDF
  documents from files formatted with the -mom macros.


VERSION 1.21
============

Troff
-----

o The new `lsm' request specifies a macro to be invoked when leading spaces
  in an input line are encountered (which are removed then).  Number
  registers `lsn' and `lss' hold the number of removed leading spaces and
  the corresponding horizontal space, respectively.

o There is a new warning category `file', enabled by default.  The `mso'
  request emits warnings in this category when the requested macro file does
  not exist.

o The new `class' request assigns a short name to a set of characters
  which can be referred to in the `cflags' request.  This is especially
  useful to control line-breaking and hyphenation rules in CJK languages.

o Three new values for the `cflags' request have been added, which are
  needed for proper CJK support.

    128  prohibit before but allow break after character
    256  prohibit after but allow break before character
    512  allow break before and after character

Tbl
---

o A new global option `nowarn' suppresses warnings if tables are longer than
  the current line width.

Afmtodit
--------

o New option `-o' to specify the name of the output file.

Macro Packages
--------------

o A new macro `%U' has been added to the mdoc package to indicate a URL
  reference within an .Rs/.Re environment.

o Rudimentary support for the Japanese script has been added, most suitable
  for man page handling as output by grotty.  The file `ja.tmac' contains
  the necessary setup to allow line breaks before and after CJK characters
  (with proper exceptions).  Note, however, that no inter-character spacing
  is implemented yet -- this usually causes many warnings about bad line
  breaks.

Revision 1.75: download - view: text, markup, annotated - select for diffs
Fri Jul 18 10:11:35 2014 UTC (12 years, 4 months ago) by ryoon
Branches: MAIN
CVS tags: pkgsrc-2014Q4-base, pkgsrc-2014Q4, pkgsrc-2014Q3-base, pkgsrc-2014Q3
Diff to: previous 1.74: preferred, colored
Changes since revision 1.74: +4 -1 lines
Fix SCO OpenServer 5.0.7/3.2 build.

Revision 1.74: download - view: text, markup, annotated - select for diffs
Thu May 29 23:37:34 2014 UTC (12 years, 5 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2014Q2-base, pkgsrc-2014Q2
Diff to: previous 1.73: preferred, colored
Changes since revision 1.73: +2 -2 lines
Bump for perl-5.20.0.
Do it for all packages that
* mention perl, or
* have a directory name starting with p5-*, or
* depend on a package starting with p5-
like last time, for 5.18, where this didn't lead to complaints.
Let me know if you have any this time.

Revision 1.73: download - view: text, markup, annotated - select for diffs
Thu Sep 19 10:11:47 2013 UTC (13 years, 2 months ago) by fhajny
Branches: MAIN
CVS tags: pkgsrc-2014Q1-base, pkgsrc-2014Q1, pkgsrc-2013Q4-base, pkgsrc-2013Q4, pkgsrc-2013Q3-base, pkgsrc-2013Q3
Diff to: previous 1.72: preferred, colored
Changes since revision 1.72: +2 -2 lines
Step back from requiring gmake, remove unneeded bits that break bmake.

Revision 1.72: download - view: text, markup, annotated - select for diffs
Wed Sep 18 09:58:09 2013 UTC (13 years, 2 months ago) by fhajny
Branches: MAIN
Diff to: previous 1.71: preferred, colored
Changes since revision 1.71: +2 -2 lines
Needs gmake to install chem (fixes at least SunOS).

Revision 1.71: download - view: text, markup, annotated - select for diffs
Tue Sep 17 21:15:37 2013 UTC (13 years, 2 months ago) by joerg
Branches: MAIN
Diff to: previous 1.70: preferred, colored
Changes since revision 1.70: +3 -2 lines
Installs chem now, so add it to the PLIST, fix the interpreter path and
bump revision.

Revision 1.70: download - view: text, markup, annotated - select for diffs
Thu Sep 12 10:39:24 2013 UTC (13 years, 2 months ago) by jperkin
Branches: MAIN
Diff to: previous 1.69: preferred, colored
Changes since revision 1.69: +3 -3 lines
Adjust CONFLICTS with mdocml, versions after and including 1.12.0nb3
no longer conflict with this package.

Bump PKGREVISION.

Revision 1.69: download - view: text, markup, annotated - select for diffs
Fri May 31 12:42:07 2013 UTC (13 years, 5 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2013Q2-base, pkgsrc-2013Q2
Diff to: previous 1.68: preferred, colored
Changes since revision 1.68: +2 -2 lines
Bump all packages for perl-5.18, that
a) refer 'perl' in their Makefile, or
b) have a directory name of p5-*, or
c) have any dependency on any p5-* package

Like last time, where this caused no complaints.

Revision 1.68: download - view: text, markup, annotated - select for diffs
Wed Apr 24 10:06:52 2013 UTC (13 years, 6 months ago) by sbd
Branches: MAIN
Diff to: previous 1.67: preferred, colored
Changes since revision 1.67: +2 -2 lines
Revbump for all packages that have USE_TOOLS+=gs

Revision 1.67: download - view: text, markup, annotated - select for diffs
Thu Oct 25 06:55:52 2012 UTC (14 years ago) by asau
Branches: MAIN
CVS tags: pkgsrc-2013Q1-base, pkgsrc-2013Q1, pkgsrc-2012Q4-base, pkgsrc-2012Q4
Diff to: previous 1.66: preferred, colored
Changes since revision 1.66: +1 -2 lines
Drop superfluous PKG_DESTDIR_SUPPORT, "user-destdir" is default these days.

Revision 1.66: download - view: text, markup, annotated - select for diffs
Sun Oct 21 21:23:45 2012 UTC (14 years ago) by cheusov
Branches: MAIN
Diff to: previous 1.65: preferred, colored
Changes since revision 1.65: +6 -3 lines
Add CONFLICTS with mdocml and ja-groff; Add LICENSE; Fix pkglint warning

Revision 1.65: download - view: text, markup, annotated - select for diffs
Wed Oct 3 21:57:48 2012 UTC (14 years, 1 month ago) by wiz
Branches: MAIN
Diff to: previous 1.64: preferred, colored
Changes since revision 1.64: +2 -2 lines
Bump all packages that use perl, or depend on a p5-* package, or
are called p5-*.

I hope that's all of them.

Revision 1.64: download - view: text, markup, annotated - select for diffs
Thu May 31 09:24:53 2012 UTC (14 years, 5 months ago) by fhajny
Branches: MAIN
CVS tags: pkgsrc-2012Q3-base, pkgsrc-2012Q3, pkgsrc-2012Q2-base, pkgsrc-2012Q2
Diff to: previous 1.63: preferred, colored
Changes since revision 1.63: +2 -9 lines
Bypass a troff check in configure to stop introducing an unneeded
g-prefix on SunOS, brings PLIST consistency across operating systems.

Revision 1.63: download - view: text, markup, annotated - select for diffs
Sat Mar 31 20:17:13 2012 UTC (14 years, 7 months ago) by hans
Branches: MAIN
CVS tags: pkgsrc-2012Q1-base, pkgsrc-2012Q1
Diff to: previous 1.62: preferred, colored
Changes since revision 1.62: +6 -3 lines
Make CFLAGS.SunOS specific to gcc>=4.6

On SunOS, gcc 4.6 and later enable c99 and XPG6 features for c++, but
the configure check for iconv uses plain c and gets a pre-XPG6 prototype
for iconv(). This inconsistency then leads to failure when building
preconv.

Revision 1.62: download - view: text, markup, annotated - select for diffs
Wed Feb 29 13:34:24 2012 UTC (14 years, 8 months ago) by hans
Branches: MAIN
Diff to: previous 1.61: preferred, colored
Changes since revision 1.61: +3 -1 lines
Set CFLAGS.SunOS to get a XPG6 iconv to fix the build of preconv.

Revision 1.61: download - view: text, markup, annotated - select for diffs
Wed Feb 29 13:33:00 2012 UTC (14 years, 8 months ago) by hans
Branches: MAIN
Diff to: previous 1.60: preferred, colored
Changes since revision 1.60: +2 -1 lines
Revert libiconv buildlink change, breaks on systems with builtin iconv.

Revision 1.60: download - view: text, markup, annotated - select for diffs
Tue Feb 28 15:09:04 2012 UTC (14 years, 8 months ago) by hans
Branches: MAIN
Diff to: previous 1.59: preferred, colored
Changes since revision 1.59: +2 -3 lines
Buildlink against converters/libiconv instead of just depending on it.
Fixes a build problem seen on SunOS, and shouldn't negatively affect
other systems.

Revision 1.57.2.2: download - view: text, markup, annotated - select for diffs
Thu Jul 28 02:30:24 2011 UTC (15 years, 3 months ago) by sbd
Branches: pkgsrc-2011Q2
Diff to: previous 1.57.2.1: preferred, colored; branchpoint 1.57: preferred, colored; next MAIN 1.58: preferred, colored
Changes since revision 1.57.2.1: +1 -1 lines
Pullup ticket #3481 - requested by tez
textproc/groff security/portablity update

Revisions pulled up:
- textproc/groff/Makefile                                       1.59
- textproc/groff/distinfo                                       1.16
- textproc/groff/patches/patch-contrib_pdfmark_pdfroff.sh       1.2

---
   Module Name:   pkgsrc
   Committed By:  tez
   Date:          Wed Jul 27 16:33:25 UTC 2011
   Modified Files:
         pkgsrc/textproc/groff: Makefile distinfo
         pkgsrc/textproc/groff/patches: patch-contrib_pdfmark_pdfroff.sh
   Log Message:
   Adjust pdfroff security patch to not use '-p' option to mktemp which is
   missing on some platforms.  fixes PR#45181

Revision 1.59: download - view: text, markup, annotated - select for diffs
Wed Jul 27 16:33:25 2011 UTC (15 years, 3 months ago) by tez
Branches: MAIN
CVS tags: pkgsrc-2011Q4-base, pkgsrc-2011Q4, pkgsrc-2011Q3-base, pkgsrc-2011Q3
Diff to: previous 1.58: preferred, colored
Changes since revision 1.58: +1 -1 lines
Adjust pdfroff security patch to not use '-p' option to mktemp which is
missing on some platforms.  fixes PR#45181

Revision 1.57.2.1: download - view: text, markup, annotated - select for diffs
Thu Jul 21 04:24:07 2011 UTC (15 years, 4 months ago) by sbd
Branches: pkgsrc-2011Q2
Diff to: previous 1.57: preferred, colored
Changes since revision 1.57: +4 -2 lines
Pullup ticket #3477 - requested by tez
textproc/groff security fix

Revisions pulled up:
- textproc/groff/Makefile                                       1.58
- textproc/groff/distinfo                                       1.15
- textproc/groff/patches/patch-config.guess                     1.1
- textproc/groff/patches/patch-configure                        1.1
- textproc/groff/patches/patch-contrib_eqn2graph_eqn2graph.sh   1.1
- textproc/groff/patches/patch-contrib_gdiffmk_tests_runtests.in 1.1
- textproc/groff/patches/patch-contrib_grap2graph_grap2graph.sh 1.1
- textproc/groff/patches/patch-contrib_groffer_perl_groffer.pl  1.1
- textproc/groff/patches/patch-contrib_groffer_perl_roff2.pl    1.1
- textproc/groff/patches/patch-contrib_pdfmark_pdfroff.man      1.1
- textproc/groff/patches/patch-contrib_pdfmark_pdfroff.sh       1.1
- textproc/groff/patches/patch-contrib_pic2graph_pic2graph.sh   1.1
- textproc/groff/patches/patch-doc_fixinfo.sh                   1.1
- textproc/groff/patches/patch-doc_groff.info-2                 1.1
- textproc/groff/patches/patch-gendef.sh                        1.1
- textproc/groff/patches/patch-src_roff_groff_pipeline.c        1.1

---
   Module Name:    pkgsrc
   Committed By:   tez
   Date:           Tue Jul 19 21:09:40 UTC 2011

   Modified Files:
           pkgsrc/textproc/groff: Makefile distinfo
   Added Files:
           pkgsrc/textproc/groff/patches: patch-config.guess patch-configure
               patch-contrib_eqn2graph_eqn2graph.sh
               patch-contrib_gdiffmk_tests_runtests.in
               patch-contrib_grap2graph_grap2graph.sh
               patch-contrib_groffer_perl_groffer.pl
               patch-contrib_groffer_perl_roff2.pl
               patch-contrib_pdfmark_pdfroff.man patch-contrib_pdfmark_pdfroff.sh
               patch-contrib_pic2graph_pic2graph.sh patch-doc_fixinfo.sh
               patch-doc_groff.info-2 patch-gendef.sh
               patch-src_roff_groff_pipeline.c

   Log Message:
   Fix many temporary file handling issues, including in pdfroff
   (resolves CVE-2009-5044 / SA44999)
   Patches copied from:

   http://cvsweb.openwall.com/cgi/cvsweb.cgi/Owl/packages/groff/groff-1.20.1-owl-tmp.diff?rev=1.2
   Modified for pkgsrc and excluded a documentaion change to doc/groff.texinfo
   that changes a `makeinfo' is too old warning into a fatal error.

   Added patch to make pdfroff.sh use -dSAFER
   See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=538338 for details.

Revision 1.58: download - view: text, markup, annotated - select for diffs
Tue Jul 19 21:09:38 2011 UTC (15 years, 4 months ago) by tez
Branches: MAIN
Diff to: previous 1.57: preferred, colored
Changes since revision 1.57: +3 -1 lines
Fix many temporary file handling issues, including in pdfroff
(resolves CVE-2009-5044 / SA44999)
Patches copied from:
 http://cvsweb.openwall.com/cgi/cvsweb.cgi/Owl/packages/groff/groff-1.20.1-owl-tmp.diff?rev=1.2
Modified for pkgsrc and excluded a documentaion change to doc/groff.texinfo
that changes a `makeinfo' is too old warning into a fatal error.

Added patch to make pdfroff.sh use -dSAFER
See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=538338 for details.

Revision 1.57: download - view: text, markup, annotated - select for diffs
Tue Apr 26 12:07:14 2011 UTC (15 years, 6 months ago) by obache
Branches: MAIN
CVS tags: pkgsrc-2011Q2-base
Branch point for: pkgsrc-2011Q2
Diff to: previous 1.56: preferred, colored
Changes since revision 1.56: +8 -2 lines
replace shebang for perl scripts.

Bump PKGREVISION.

Revision 1.56: download - view: text, markup, annotated - select for diffs
Thu Feb 4 13:13:57 2010 UTC (16 years, 9 months ago) by tnn
Branches: MAIN
CVS tags: pkgsrc-2011Q1-base, pkgsrc-2011Q1, pkgsrc-2010Q4-base, pkgsrc-2010Q4, pkgsrc-2010Q3-base, pkgsrc-2010Q3, pkgsrc-2010Q2-base, pkgsrc-2010Q2, pkgsrc-2010Q1-base, pkgsrc-2010Q1
Diff to: previous 1.55: preferred, colored
Changes since revision 1.55: +10 -15 lines
move comment

Revision 1.55: download - view: text, markup, annotated - select for diffs
Thu Feb 4 12:49:03 2010 UTC (16 years, 9 months ago) by tnn
Branches: MAIN
Diff to: previous 1.54: preferred, colored
Changes since revision 1.54: +12 -24 lines
Give up trying to code for the various tmac prefix cases and just
do that part dynamically.

Revision 1.54: download - view: text, markup, annotated - select for diffs
Mon Dec 7 00:01:04 2009 UTC (16 years, 11 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2009Q4-base, pkgsrc-2009Q4
Diff to: previous 1.53: preferred, colored
Changes since revision 1.53: +2 -2 lines
Drop MAINTAINER.

Revision 1.53: download - view: text, markup, annotated - select for diffs
Wed Oct 21 16:51:46 2009 UTC (17 years ago) by tnn
Branches: MAIN
Diff to: previous 1.52: preferred, colored
Changes since revision 1.52: +6 -4 lines
resolve lib/charset.alias conflicts. PR pkg/42199

Revision 1.52: download - view: text, markup, annotated - select for diffs
Fri Aug 14 15:41:18 2009 UTC (17 years, 3 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2009Q3-base, pkgsrc-2009Q3
Diff to: previous 1.51: preferred, colored
Changes since revision 1.51: +2 -1 lines
Mark as not make-jobs safe. Fails with -j16 for me.

Revision 1.51: download - view: text, markup, annotated - select for diffs
Sat Aug 1 19:13:15 2009 UTC (17 years, 3 months ago) by dholland
Branches: MAIN
Diff to: previous 1.50: preferred, colored
Changes since revision 1.50: +38 -12 lines
Rearrange how the conditional plist substitutions are done to be more
flexible. Adjust Solaris case to not expect gan.tmac. Fixes PR 35295.
Bump PKGREVISION as a precaution.

Revision 1.50: download - view: text, markup, annotated - select for diffs
Tue Feb 24 20:41:45 2009 UTC (17 years, 8 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2009Q2-base, pkgsrc-2009Q2, pkgsrc-2009Q1-base, pkgsrc-2009Q1
Diff to: previous 1.49: preferred, colored
Changes since revision 1.49: +3 -7 lines
Update to 1.20.1:

VERSION 1.20.1
==============

A packaging error made it necessary to publish this release.  No
user-visible changes.


VERSION 1.20
============

Groff
-----

o XHTML support has been added to grohtml and can be specified by
  -Txhtml.  This option also utilizes the MathML capability of
  eqn and combines the outputs of both in the final XHTML file.
  Users can also specify the `-P-V' option together with `-Txhtml'
  in groff.  This has the effect of creating an XHTML validator
  button at the bottom of each page.

o Some options have been added to control a new preprocessor,
  `preconv' (see below): `-k' activates it, `-K' sets the input
  encoding, and `-D' sets the default encoding.

o A new environment variable `GROFF_ENCODING' sets the encoding
  of input files; it implies command option `-k'.

Troff
-----

o Two new requests `device' and `devicem' have been added which are
  equivalents to the \X and \Y escapes, respectively.

o A new read-only number register `.br' is available which is set to 1
  if a macro is called as .foo and to 0 if called as 'foo.  This allows to
  reliably modify requests.

    .als bp@orig bp
    .de bp
    .  tm before bp
    .  ie \\n[.br] .bp@orig
    .  el 'bp@orig
    .  tm after bp
    ..

o A new request `fzoom' has been added to adjust the optical size of a
  font in relation to the others.  The zoom factor is given in integer
  multiples of 1/1000th.  In the following example, the CR font is
  magnified by 10% (the zoom factor is 1.1).

    .fam P
    .fzoom CR 1100
    .ps 12
    Palatino and \f[CR]Courier\f[]

  The new number register `.zoom' holds the zoom value of the current font,
  in multiples of 1/1000th.

o The `cflags' request has been extended with a new flag value 64, to be
  used in combination with values 2 (break before character) and 4 (break
  after character).  If set, the hyphenation codes of the surrounding
  characters are ignored.

o A new debugging request, `pev', has been added to print all of the current
  known environments to stderr.  It first prints the state of the current
  environment, then iterates through all of the known environments, printing
  each except the one that is current.

o A new escape `\$^' has been added.  It represents the parameters of a
  macro as if they were an argument to the `ds' request.  This is used by
  `trace.tmac'.

o A new read-only number register `.O' is available which returns the
  current suppression level as set by the `\O' escape.

o The space width emitted by the `\|' and `\^' escape sequences can be
  controlled on a per-font basis.  If there is a glyph named `\|' or `\^',
  respectively (note the leading backslash), defined in the current font
  file, use this glyph's width instead of the default value.

  This behaviour is not new, but hasn't been documented before.

Nroff
-----

o Two new command line options `-w' and `-W' are accepted and passed to
  groff to enable and disable warning messages, respectively.

Preconv
-------

o This is a new preprocessor to convert various input encodings to something
  groff understands (this is, ASCII and \[uXXXX] entities, with `XXXX' a
  hexadecimal number with 4 to 6 digits, representing a Unicode input code).
  Normally, preconv should be invoked with options `-k' and `-K' of groff.
  See the preconv man page for details.

Pic
---

o int(x) now really behaves as documented: It truncates the non-integer part
  of x, this is, it rounds towards zero and not towards the next integer
  less than or equal to x.

o Pic now supports up to 32 macro arguments (and up to 16 on EBCDIC
  platforms).

o Heinz-J
  `yslanted', which can change the shape of boxes into arbitrary
  parallelograms.

Tbl
---

o Latest versions of DWB tbl introduced an `x' column specifier for a single
  column expanded to the line width.  GNU tbl has now been extended to
  support even multiple `x' specifiers within a table.

o To avoid collision with the new `x' specifier, a block formatting macro
  must now be selected with specifier letter `m'.

Eqn
---

o Eric S. Raymond has added a new device type to eqn, MathML.  When
  -TMathML is enabled, eqn now emits MathML formula markup rather than
  groff commands.  The new groff -Txhtml device uses this.

Chem
----

o The preprocessor `chem' was added.  `chem' is a roff language to generate
  chemical structure diagrams.  It generates `pic' output.

Grops
-----

o The PS font definition files have been regenerated with newer AFM versions
  from Adobe's 35 core fonts as present in most Level 2 PS printers.  The
  changes are minor (most notably, the addition of the `Euro' glyph and an
  extended set of kerning values).

  For backwards compatibility, the old set of font definition files is still
  available; for details please read the man page of grops.

Grotty
------

o \D'p...' is now supported if the polygon consists entirely of horizontal
   and vertical lines.

Grohtml
-------

o XHTML support has been added.

o New command line option `-V' (to be used in XHTML mode) to produce an
  XHTML validator button.

o New command line option `-y' to produce a right-justified groff signature
  at the end of the document (in combination with option `-V').

Gxditview
---------

o Support for keyboard navigation has been improved.

o Similar to other X11 applications, there are now two resource files,
  `GXditview' and `GXditview-color'.

Groffer
-------

o `groffer' version 1.* exists now in a shell and a Perl version.

Afmtodit
--------

o New option `-c' to output more font information as comments.

o New option `-k' to suppress output of kerning data.

o New option `-f NAME' to set the internal name of the groff font.

Macro Packages
--------------

o Joachim Walsdorff contributed the `hdtbl' package for the generation of
  tables, using a syntax very similar to the HTML table model.  For
  example, a table with two cells and two rows looks like this:

    .TBL cols=2
    .  TR .TD 1*1 .TD 1*2
    .  TR .TD 2*1 .TD 2*2
    .ETB

  Here the same table using a more expanded syntax:

    .TBL cols=2
    .  TR
    .    TD 1*1
    .    TD 1*2
    .  TR
    .    TD 2*1
    .    TD 2*2
    .ETB

  Tables can be nested; `hdtbl' works without a preprocessor so that the
  full capability of groff's macro engine is available.

  This package currently works with `-Tps' only.

o -mandoc now supports multiple man pages (in either man or mdoc format).

o Fabrice M
  possible to get French localization of the main macro packages (-ms, -mm,
  -me, and -mom, but not -man and -mdoc which are localized differently) by
  appending `-mfr' to the list of macro packages.  Example:

    groff -ms -mfr foo > foo.ps

  Note that latin-9 input encoding is used for French (to support the `oe'
  ligature).

o Swedish macro localization (with `-msv') has been added.

o German macro localization (with `-mde' and `-mden' for traditional and
  new orthography, respectively) has been added.

o Czech macro localization (with `-mcs') has been added.

  Note that latin-2 input encoding is used for Czech.

o A new macro `Dx' has been added to the mdoc package which identifies the
  DragonFly OS.

o If mdoc is used to print multiple man pages (together with the -rcR=0
  command line option), each man page now starts a new page.

o -mtrace has been considerably improved, now showing number and string
  register assignments, among other things.  See the groff_trace man page
  for details.

o The PSPIC macro now works with all devices (producing a hollow
  rectangle on devices which don't support inclusion of PS images) and
  is loaded in troffrc at start-up.

o A new auxiliary macro package `62bit' has been added which provides some
  macros for adding, multiplying, and dividing signed 62bit integers (mainly
  to handle normal groff number operations without risking overflow errors).

o For -ms, Eric S. Raymond contributed support for ancient Bell Labs
  localisms `.SC', `.UC', `.P1', and `.P2'.  The latter three are enabled
  only after .SC is called.

o A new string, `SN-STYLE', has been added to the ms macros, controlling
  the formatting of section numbers in headings defined by `.NH'.

o The new macro package `ptx' provides a template definition for the `.xx'
  macro as needed by GNU ptx (for creating permuted indices).

Revision 1.49: download - view: text, markup, annotated - select for diffs
Mon Feb 16 10:50:23 2009 UTC (17 years, 9 months ago) by wiz
Branches: MAIN
Diff to: previous 1.48: preferred, colored
Changes since revision 1.48: +11 -3 lines
Convert to user-destdir. Fix an interpreter path while here.
Bump PKGREVISION for the latter.

Revision 1.48: download - view: text, markup, annotated - select for diffs
Mon Nov 10 17:21:38 2008 UTC (18 years ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2008Q4-base, pkgsrc-2008Q4
Diff to: previous 1.47: preferred, colored
Changes since revision 1.47: +2 -2 lines
Bump PKGREVISION for libXaw API depends bump due to libXaw8 removal.

Revision 1.47: download - view: text, markup, annotated - select for diffs
Sat Sep 8 21:58:00 2007 UTC (19 years, 2 months ago) by jlam
Branches: MAIN
CVS tags: pkgsrc-2008Q3-base, pkgsrc-2008Q3, pkgsrc-2008Q2-base, pkgsrc-2008Q2, pkgsrc-2008Q1-base, pkgsrc-2008Q1, pkgsrc-2007Q4-base, pkgsrc-2007Q4, pkgsrc-2007Q3-base, pkgsrc-2007Q3, cwrapper, cube-native-xorg-base, cube-native-xorg
Diff to: previous 1.46: preferred, colored
Changes since revision 1.46: +2 -5 lines
Convert to use the features framework.

Revision 1.46: download - view: text, markup, annotated - select for diffs
Thu Sep 6 21:51:54 2007 UTC (19 years, 2 months ago) by jlam
Branches: MAIN
Diff to: previous 1.45: preferred, colored
Changes since revision 1.45: +2 -3 lines
Convert all libnbcompat/buildlink3.mk references to inplace.mk.

Revision 1.45: download - view: text, markup, annotated - select for diffs
Sun Aug 5 08:47:57 2007 UTC (19 years, 3 months ago) by tnn
Branches: MAIN
Diff to: previous 1.44: preferred, colored
Changes since revision 1.44: +8 -2 lines
OSF1 needs getopt_long like IRIX. Add another PLIST conditional for OSF1.

Revision 1.44: download - view: text, markup, annotated - select for diffs
Wed Aug 1 22:33:03 2007 UTC (19 years, 3 months ago) by joerg
Branches: MAIN
Diff to: previous 1.43: preferred, colored
Changes since revision 1.43: +2 -2 lines
To disable CHECK_PERMS, it works better to spell the option NO.
*blush*

Revision 1.43: download - view: text, markup, annotated - select for diffs
Tue Jul 31 14:39:50 2007 UTC (19 years, 3 months ago) by joerg
Branches: MAIN
Diff to: previous 1.42: preferred, colored
Changes since revision 1.42: +3 -1 lines
On some platforms, groff is needed to build checkperms, so disable
the check here.

Revision 1.42: download - view: text, markup, annotated - select for diffs
Fri Jul 20 01:05:11 2007 UTC (19 years, 4 months ago) by tnn
Branches: MAIN
Diff to: previous 1.41: preferred, colored
Changes since revision 1.41: +7 -1 lines
Fix PLIST problem on HP-UX.

Revision 1.41: download - view: text, markup, annotated - select for diffs
Mon Feb 19 11:19:48 2007 UTC (19 years, 9 months ago) by rillig
Branches: MAIN
CVS tags: pkgsrc-2007Q2-base, pkgsrc-2007Q2, pkgsrc-2007Q1-base, pkgsrc-2007Q1
Diff to: previous 1.40: preferred, colored
Changes since revision 1.40: +2 -2 lines
IRIX 6 doesn't have getopt_long as well.

Revision 1.40: download - view: text, markup, annotated - select for diffs
Mon Oct 23 12:54:05 2006 UTC (20 years ago) by dmcmahill
Branches: MAIN
CVS tags: pkgsrc-2006Q4-base, pkgsrc-2006Q4
Diff to: previous 1.39: preferred, colored
Changes since revision 1.39: +4 -1 lines
Auto-generate the portion of the PLIST for ${PREFIX}/lib/groff/site-tmac
as what ends up in there is based on details of what ones os may or may
not come with.  Fixes packaging on solaris and probably others.

Revision 1.39: download - view: text, markup, annotated - select for diffs
Tue Oct 3 13:40:22 2006 UTC (20 years, 1 month ago) by schwarz
Branches: MAIN
Diff to: previous 1.38: preferred, colored
Changes since revision 1.38: +6 -1 lines

added support for IRIX 5

Revision 1.38: download - view: text, markup, annotated - select for diffs
Mon Jul 24 16:49:12 2006 UTC (20 years, 3 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2006Q3-base, pkgsrc-2006Q3
Diff to: previous 1.37: preferred, colored
Changes since revision 1.37: +7 -7 lines
Add groff-docs option, enabled by default.

When turning it off, you can get rid of the netpbm, psutils,
and ghostscript dependencies. Might help in bootstrapping some
platforms. Based on a patch from schmonz@.

While here, improve PLIST by trying to remove an additional directory
and bump PKGREVISION for that.

Revision 1.37: download - view: text, markup, annotated - select for diffs
Fri Apr 7 19:54:17 2006 UTC (20 years, 7 months ago) by jlam
Branches: MAIN
CVS tags: pkgsrc-2006Q2-base, pkgsrc-2006Q2
Diff to: previous 1.36: preferred, colored
Changes since revision 1.36: +2 -2 lines
List info files directly in the PLIST and honor PKG{INFO,MAN}DIR.

Revision 1.36: download - view: text, markup, annotated - select for diffs
Sun Mar 12 16:26:09 2006 UTC (20 years, 8 months ago) by rillig
Branches: MAIN
CVS tags: pkgsrc-2006Q1-base, pkgsrc-2006Q1
Diff to: previous 1.35: preferred, colored
Changes since revision 1.35: +8 -3 lines
Fixed the path to the sed interpreter. Bumped PKGREVISION.

Revision 1.35: download - view: text, markup, annotated - select for diffs
Sun Mar 5 19:23:21 2006 UTC (20 years, 8 months ago) by wiz
Branches: MAIN
Diff to: previous 1.34: preferred, colored
Changes since revision 1.34: +7 -1 lines
(Hopefully) fix Solaris PLIST. Addresses PR 32966 by Neil Hoggarth.

Revision 1.34: download - view: text, markup, annotated - select for diffs
Sun Feb 5 23:11:02 2006 UTC (20 years, 9 months ago) by joerg
Branches: MAIN
Diff to: previous 1.33: preferred, colored
Changes since revision 1.33: +2 -2 lines
Recursive revision bump / recommended bump for gettext ABI change.

Revision 1.33: download - view: text, markup, annotated - select for diffs
Sat Dec 31 16:28:40 2005 UTC (20 years, 10 months ago) by ben
Branches: MAIN
Diff to: previous 1.32: preferred, colored
Changes since revision 1.32: +1 -5 lines
> When building on Interix, add Xext to X_EXTRA_LIBS.  The xditview
> program requires Xaw, which requires the Xlib shape routines, which on
> Interix are in Xext.  http://www.faqs.org/faqs/x-faq/part6/section-27.html

Move fix from Makefile to options.mk, so it is only used when the x11
option is enabled.

Revision 1.32: download - view: text, markup, annotated - select for diffs
Sat Dec 31 14:40:38 2005 UTC (20 years, 10 months ago) by ben
Branches: MAIN
Diff to: previous 1.31: preferred, colored
Changes since revision 1.31: +5 -1 lines
When building on Interix, add Xext to X_EXTRA_LIBS.  The xditview
program requires Xaw, which requires the Xlib shape routines, which on
Interix are in Xext.  http://www.faqs.org/faqs/x-faq/part6/section-27.html

Revision 1.31: download - view: text, markup, annotated - select for diffs
Fri Dec 9 20:40:56 2005 UTC (20 years, 11 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2005Q4-base, pkgsrc-2005Q4
Diff to: previous 1.30: preferred, colored
Changes since revision 1.30: +4 -1 lines
Add x11 option to the package, on by default.

Addresses PR 23130 by reed@

Revision 1.30: download - view: text, markup, annotated - select for diffs
Wed Dec 7 17:51:51 2005 UTC (20 years, 11 months ago) by wiz
Branches: MAIN
Diff to: previous 1.29: preferred, colored
Changes since revision 1.29: +2 -3 lines
Update to 1.19.2. SunOS PLIST not updated, someone please merge
it into the normal PLIST.

VERSION 1.19.2
==============

Troff
-----

o Analogously to the .ft and \f pair, two new requests `gcolor' and
  `fcolor' (which pair with \m and \M, respectively) have been added to
  set the glyph and background colours.

o A new read-only, string-valued register `.sty' returns the name of the
  current style.

o Two new conditional operators `F <name>' and `S <name>' have been added.
  `F' is true if a font <name> exists.  `S' is true if a style <name> has
  been registered.

o Cyrillic characters have been added to the `utf8' and `html' output
  devices.

Pic
---

o The `by' argument in a `for' loop can now be negative if it is additive.
  For the multiplicative case, it must be greater than zero.

Eqn
---

o The following keywords aren't new but haven't been documented previously:

    undef NAME    (to undefine a macro)
    copy  "FILE"  (a synonym for `include')
    space n       (to modify the vertical spacing before and after
                   an equation)

o The following macros aren't new but haven't been documented previously:

    Alpha, ..., Omega   (the same as `ALPHA', ..., `OMEGA')
    ldots               (three dots on the base line)
    dollar              (a dollar glyph)

o The following keywords have been extended.  Again, this isn't new but
  hasn't been documented previously:

    col n { ... }
    lcol n { ... }
    rcol n { ... }
    ccol n { ... }
    pile n { ... }
    lpile n { ... }
    rpile n { ... }
    cpile n { ... }   (set vertical spacing between rows to N)

Grohtml
-------

o This device driver has been raised to beta stage; its set of tags should
  be stable now.

o New command line option `-s' to set the base point size.

o New command line option `-S' to set the split level while generating
  multiple files.

Grotty
------

o Experimental support for zero-width and double-width characters.

Gxditview
---------

o On platforms which have the X Window System this program is now built and
  installed automatically.

Xtotroff
--------

o This program to create font definition files for xditview isn't new but
  hasn't been installed previously.

Groffer
-------

o A security problem (reported as CAN-2004-0969) has been fixed.

Gdiffmk
-------

o A new script contributed by Mike Bianchi.  It compares two groff, nroff,
  or troff documents and creates an output with added margin characters
  (using `.mc') to indicate the differences.

Pdfroff
-------

o A new wrapper script contributed by Keith Marshall to easily create PDF
  documents with groff.

Macro packages
--------------

o ms.tmac

  . Support for fractional point sizes: A value for the `PS', `VS', `FPS',
    and `VPS' register larger than or equal to 1000 is always divided by
    1000.  For example, `.nr PS 10250' sets the document's font size to
    10.25 points.

  . The `Ds' and `De' macros provided in ms since groff version 1.19 have
    been removed; the equivalent `DS' and `DE' macros should be used
    instead.  X11 documents which actually use `Ds' and `De' always load a
    specific macro file from the X11 distribution (`macros.t') which
    provides proper definitions for the two macros.

  . The following registers have been added for improving layout control:

    PORPHANS
      Defines number of lines following `LP', `PP', `QP', `IP' or `XP' which
      must be kept together, before any automatic page break.

    HORPHANS
      Sets number of lines of following paragraph which must be kept with a
      heading, defined by `NH' or `SH', before any automatic page break.

    GROWPS
      Sets the first level of heading (set with `NH') which will keep the
      same point size as body text.

    PSINCR
      Sets the point size increment for each level of heading (set with
      `NH'), below the threshold level set by `GROWPS'; e.g., if
      \n[PS] = 10, \n[GROWPS] = 3 and \n[PSINCR] = 2.0p, then `.NH 1' will
      produce 14pt headings, `.NH 2' will produce 12pt, and all other levels
      will remain at 10pt (because \n[PS] = 10).

  . The `SH' macro now accepts a numeric argument, to make heading size
    match that of `NH' with same argument value when the `GROWPS'/`PSINCR'
    feature is enabled.

  Please refer to the documentation of the ms package for other, minor
  improvements.

o me.tmac

  The section type set with the `++' request is available in the `_M'
  register.  This isn't new but hasn't been documented before.

o www.tmac

  The `HR' macro no longer causes an empty line for non-HTML devices.

  A new macro `HEAD' has been added to directly add data to the
  <head>...</head> block.

  New macros `OLS' and `OLE' to start and end an ordered list.

  New macros `DLS' and `DLE' to start and end a definition list.

Pdfmark
-------

o A new macro package contributed by Keith Marshall which implements PDF
  marks.  This is in alpha stage currently.

Miscellaneous
-------------

o Two new keywords to the DESC file have been added which are needed for
  grohtml: `image_generator' and `unscaled_charwidths'.  The former gives
  the name of the program which creates PNG images, and the latter makes
  troff always use unscaled character widths.

Revision 1.29: download - view: text, markup, annotated - select for diffs
Mon Dec 5 20:51:03 2005 UTC (20 years, 11 months ago) by rillig
Branches: MAIN
Diff to: previous 1.28: preferred, colored
Changes since revision 1.28: +4 -4 lines
Fixed pkglint warnings. The warnings are mostly quoting issues, for
example MAKE_ENV+=FOO=${BAR} is changed to MAKE_ENV+=FOO=${BAR:Q}. Some
other changes are outlined in

    http://mail-index.netbsd.org/tech-pkg/2005/12/02/0034.html

Revision 1.28: download - view: text, markup, annotated - select for diffs
Mon Nov 28 06:41:22 2005 UTC (20 years, 11 months ago) by jlam
Branches: MAIN
Diff to: previous 1.27: preferred, colored
Changes since revision 1.27: +2 -3 lines
Change all instances of including mk/ghostscript.mk into asking for
the appropriate tool via USE_TOOLS (usually "gs:run"), and remove
ghostscript.mk.  This change removes a rather out-dated file from
pkgsrc and switches packages to use the more compact implementation
of the Ghostcript-handling inside the tools framework.

Revision 1.27: download - view: text, markup, annotated - select for diffs
Sat Jul 16 01:19:24 2005 UTC (21 years, 4 months ago) by jlam
Branches: MAIN
CVS tags: pkgsrc-2005Q3-base, pkgsrc-2005Q3
Diff to: previous 1.26: preferred, colored
Changes since revision 1.26: +2 -2 lines
Get rid of USE_PERL5.  The new way to express needing the Perl executable
around at either build-time or at run-time is:

	USE_TOOLS+=	perl		# build-time
	USE_TOOLS+=	perl:run	# run-time

Also remove some places where perl5/buildlink3.mk was being included
by a package Makefile, but all that the package wanted was the Perl
executable.

Revision 1.26: download - view: text, markup, annotated - select for diffs
Fri Jun 24 20:53:20 2005 UTC (21 years, 4 months ago) by kristerw
Branches: MAIN
Diff to: previous 1.25: preferred, colored
Changes since revision 1.25: +2 -2 lines
Change the CONFIGURE_ENV to use the variables users are supposed to set,
rather than the autoconf cache variables.

Revision 1.25: download - view: text, markup, annotated - select for diffs
Mon Jun 20 16:29:55 2005 UTC (21 years, 5 months ago) by kristerw
Branches: MAIN
CVS tags: pkgsrc-2005Q2-base, pkgsrc-2005Q2
Diff to: previous 1.24: preferred, colored
Changes since revision 1.24: +3 -2 lines
Prevent paths to the build directories from being included in the package.
Bump PKGREVISION.

Revision 1.24: download - view: text, markup, annotated - select for diffs
Mon Apr 11 21:47:34 2005 UTC (21 years, 7 months ago) by tv
Branches: MAIN
Diff to: previous 1.23: preferred, colored
Changes since revision 1.23: +1 -2 lines
Remove USE_BUILDLINK3 and NO_BUILDLINK; these are no longer used.

Revision 1.23: download - view: text, markup, annotated - select for diffs
Mon Mar 14 04:36:52 2005 UTC (21 years, 8 months ago) by tv
Branches: MAIN
CVS tags: pkgsrc-2005Q1-base, pkgsrc-2005Q1
Diff to: previous 1.22: preferred, colored
Changes since revision 1.22: +1 -3 lines
Make build/work on Interix.

How ugly: a hypot(near0, near0) can result in a NaN if round-off error
somehow makes the a^2+b^2 result negative.  Work around it with an
"#ifdef __INTERIX"-only fix.

Revision 1.22: download - view: text, markup, annotated - select for diffs
Tue Jan 18 12:54:59 2005 UTC (21 years, 10 months ago) by tv
Branches: MAIN
Diff to: previous 1.21: preferred, colored
Changes since revision 1.21: +3 -1 lines
Temporarily mark as NOT_FOR_PLATFORM=Interix due to endless loop in build.

Revision 1.21: download - view: text, markup, annotated - select for diffs
Fri Dec 17 18:53:54 2004 UTC (21 years, 11 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2004Q4-base, pkgsrc-2004Q4
Diff to: previous 1.20: preferred, colored
Changes since revision 1.20: +2 -2 lines
Fix insecure temporary file handling in groffer. Bump PKGREVISION.

Revision 1.20: download - view: text, markup, annotated - select for diffs
Sat Nov 13 22:04:53 2004 UTC (22 years ago) by jlam
Branches: MAIN
Diff to: previous 1.19: preferred, colored
Changes since revision 1.19: +2 -2 lines
Replace USE_GCC_SHLIB with "USE_LANGUAGE=c c++" (the latter implies the
former) for applications that are known to require C++.

Revision 1.19: download - view: text, markup, annotated - select for diffs
Mon Aug 2 16:14:24 2004 UTC (22 years, 3 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2004Q3-base, pkgsrc-2004Q3
Diff to: previous 1.18: preferred, colored
Changes since revision 1.18: +2 -1 lines
Add two patches:
. build fix for sparc64
. bug fix to make xorg-docs build
Both from official groff CVS via Werner Lemberg.

Bump PKGREVISION.

Revision 1.18: download - view: text, markup, annotated - select for diffs
Sun Jul 11 13:40:05 2004 UTC (22 years, 4 months ago) by wiz
Branches: MAIN
Diff to: previous 1.17: preferred, colored
Changes since revision 1.17: +2 -3 lines
Update to 1.19.1:

Groff
-----

o The argument of the command line option `-I' is now also passed to troff
  and grops, specifying a directory to search for files on the command line,
  files named in `so' and `psbb' requests, and files named in \X'ps: file'
  and \X'ps: import' escapes.

o If option `-V' is used more than once, the commands will be both printed
  on standard error and run.

Troff
-----

o Two new read-only, string-valued registers `.m' and `.M' return the
  name of the current drawing and background color, respectively.

o New read-only register `.U' which is set to 1 if in safer mode and set
  to 0 if in unsafe mode.

o An input encoding file for latin-5 (a.k.a. ISO 8859-9) has been added.
  Example use:

    groff -Tdvi -mlatin5 my_file > my_file.dvi

  Note that some output devices don't support all glyphs of this encoding.

o If the `return' request is called with an argument, it exits twice,
  namely the current macro and the macro one level higher.  This is
  used to define a wrapper macro for `return' in trace.tmac.

o For completeness, two new requests have been added: `dei1' and `ami1'.
  They are equivalent to `dei' and `ami', respectively, but the macros
  are executed with compatibility mode off (similar to `de1' and `am1').

o New command line option `-I' to specify a directory for files (both
  those on the command line and those named in `psbb' requests).  This is
  also handled by the groff wrapper program.

o Since version 1.19 you can say `.vs 0'.  Older versions emit a warning
  and convert this to `.vs \n[.V]'.

  This hasn't been documented properly.  Note that `.vs 0' isn't saved in a
  diversion since it doesn't result in vertical motion.

Pic
___

o Dashed and dotted ellipses have been implemented.

Tbl
---

o New key character `x' to make tbl call a user-defined macro on a table
  cell.  Patch by Heinz-Jürgen Oertel <hj.oertel@surfeu.de>.

Grap2graph
----------

o A new script contributed by Eric S. Raymond <esr@thyrsus.com>.  It
  converts a grap diagram into a cropped image.  Since it uses gs and the
  PNM library, virtually all graphics formats are available for output.
  [Note that the grap program itself isn't part of the groff package;
  see the file MORE.STUFF how to obtain grap.]

Grohtml
-------

o New option `-j' to emit output splitted into multiple files.

Grops
-----

o New command line option `-I' to specify a directory to search for files
  on the command line and files named in \X'ps: import' and \X'ps: file'
  escapes.  This is also handled by the groff wrapper program.

o The default value for the `broken' keyword in the DESC file is now 0.

Grolj4
------

o A new man page `lj4_font(5)' documents how fonts are accessed with
  grolj4.

o The built-in fonts for LJ4 and newer PCL 5 devices have been completely
  revised, mainly to access as much glyphs as possible.  The provided
  metric files should be compatible with recent PCL 5 printers also.
  Additionally, font description files have been added for the Arial and
  Times New Roman family, the MS symbol, and Wingdings fonts.

Afmtodit
--------

o New option `-x' to prevent use of built-in Adobe Glyph List.

Hpftodit
--------

o Completely revised to handle HP TrueType metric files also.  See the
  hpftodit manual page for more details.

Groffer
-------

o This version is a rewrite of groffer in many parts, but it is kept in
  the old single script style.

  New options: --text, --mode text, --tty-viewer, --X, --mode X,
  --X-viewer, --html, --mode html, --html-view, --apropos-data,
  --apropos-devel, --apropos-progs.

  New documentation file: README_SH.

  Enhancement of the configuration files and the `apropos' handling.

Macro Packages
--------------

o www.tmac: New macro `JOBNAME' to split output into multiple files.

o In mdoc, multiple calls to `.Lb' are now supported in the LIBRARY
  section.

Revision 1.17: download - view: text, markup, annotated - select for diffs
Fri Apr 30 15:11:28 2004 UTC (22 years, 6 months ago) by reed
Branches: MAIN
CVS tags: pkgsrc-2004Q2-base, pkgsrc-2004Q2
Diff to: previous 1.16: preferred, colored
Changes since revision 1.16: +16 -6 lines
This configures the to-be-installed mdoc.local file so the
"volume-operating-system" macro is ${OPSYS}.  And sets the default
.Os value to "pkgsrc" as suggested by wiz@.  (It was hard-coded
"NetBSD\~1.6".)

Usually the mdoc.local "volume-operating-system" definition is for
the operating system name often displayed on top of man pages. And
"operating-system" is for the default .Os value (operating system
and version/release) and is usually displayed at bottom of man page.

Bump PKGREVISION.

This closes my PR #23100.

Revision 1.16: download - view: text, markup, annotated - select for diffs
Sun Apr 18 19:45:11 2004 UTC (22 years, 7 months ago) by wiz
Branches: MAIN
Diff to: previous 1.15: preferred, colored
Changes since revision 1.15: +2 -2 lines
Convert to bl3.

Revision 1.15: download - view: text, markup, annotated - select for diffs
Sat Aug 9 11:27:47 2003 UTC (23 years, 3 months ago) by seb
Branches: MAIN
CVS tags: pkgsrc-2004Q1-base, pkgsrc-2004Q1, pkgsrc-2003Q4-base, pkgsrc-2003Q4
Diff to: previous 1.14: preferred, colored
Changes since revision 1.14: +1 -2 lines
USE_NEW_TEXINFO is unnecessary now.

Revision 1.14: download - view: text, markup, annotated - select for diffs
Thu Jul 31 22:02:07 2003 UTC (23 years, 3 months ago) by seb
Branches: MAIN
Diff to: previous 1.13: preferred, colored
Changes since revision 1.13: +1 -2 lines
With USE_NEW_TEXINFO, texinfo.mk should not be included by the package
Makefile so remove this inclusion.

Also convert SunOS' PLIST to USE_NEW_TEXINFO.

Revision 1.13: download - view: text, markup, annotated - select for diffs
Thu Jul 17 22:54:16 2003 UTC (23 years, 4 months ago) by grant
Branches: MAIN
Diff to: previous 1.12: preferred, colored
Changes since revision 1.12: +2 -2 lines
s/netbsd.org/NetBSD.org/

Revision 1.12: download - view: text, markup, annotated - select for diffs
Tue Jul 1 10:12:54 2003 UTC (23 years, 4 months ago) by wiz
Branches: MAIN
Diff to: previous 1.11: preferred, colored
Changes since revision 1.11: +11 -6 lines
Pull over some patches from src/ (disabling SGR and a bug fix).
Add mdoc.local from src/gnu/usr.bin/groff/tmac.
Convert to USE_NEW_TEXINFO.
Bump PKGREVISION.

Revision 1.11: download - view: text, markup, annotated - select for diffs
Thu Jun 5 03:31:00 2003 UTC (23 years, 5 months ago) by grant
Branches: MAIN
Diff to: previous 1.10: preferred, colored
Changes since revision 1.10: +2 -1 lines
despite the fact this does not (yet) build with lang/gcc on Solaris,
it does use gcc shlibs, so set USE_GCC_SHLIB.

Revision 1.10: download - view: text, markup, annotated - select for diffs
Sun May 25 07:20:05 2003 UTC (23 years, 5 months ago) by jmc
Branches: MAIN
Diff to: previous 1.9: preferred, colored
Changes since revision 1.9: +2 -2 lines
Bump PKGREVSION after html fixes

Revision 1.9: download - view: text, markup, annotated - select for diffs
Thu May 22 01:50:07 2003 UTC (23 years, 6 months ago) by jmc
Branches: MAIN
Diff to: previous 1.8: preferred, colored
Changes since revision 1.8: +4 -2 lines
In order for the html interface to work this needs ghostscript, psutils
and netpbm needs to be done as DEPENDS instead of BUILD_DEPENDS.

Revision 1.8: download - view: text, markup, annotated - select for diffs
Thu May 15 08:11:01 2003 UTC (23 years, 6 months ago) by wiz
Branches: MAIN
Diff to: previous 1.7: preferred, colored
Changes since revision 1.7: +4 -1 lines
Add BUILD_DEPENDS on netpbm, and add thus installed images to PLIST.
Bump PKGREVISION to 1.

Revision 1.7: download - view: text, markup, annotated - select for diffs
Wed May 7 13:18:25 2003 UTC (23 years, 6 months ago) by wiz
Branches: MAIN
Diff to: previous 1.6: preferred, colored
Changes since revision 1.6: +2 -3 lines
Update to 1.19.
Troff
-----

o Input encoding files for latin-9 (a.k.a. latin-0 and ISO 8859-15) and
  latin-2 (ISO 8859-2) have been added.  Example use:

    groff -Tdvi -mlatin9 my_file > my_file.dvi

  You still need proper fonts with the necessary glyphs.  Out of the box,
  the groff package supports latin-9 only for -Tps, -Tdvi, and -Tutf8,
  and latin-2 only for -Tdvi and -Tutf8.

o Composite glyphs are now supported.  To do this, a subset of the Adobe
  Glyph List (AGL) Algorithm as described in

    http://partners.adobe.com/asn/developer/typeforum/unicodegn.html

  is used to construct glyph names based on Unicode character codes.  The
  existing groff glyph names are frozen; no glyph names which can't be
  constructed algorithmically will be added in the future.

  The \[...] escape sequence has been extended to specify multiple glyph
  components.  Example:

    \[A ho]

  this accesses a glyph with the name `u0041_0328'.

  Some groff glyphs which are useful as composites map to `wrong' Unicode
  code points.  For example, `ho' maps to U+02DB which is a spacing
  ogonek, whereas a non-spacing ogonek U+0328 is needed for composite
  glyphs.  The new request

    .composite from to

  will change the mapping while a composite glyph name is constructed.
  To make \[A ho] yield the expected result,

    .composite ho u0328

  is needed.  [The new file `composite.tmac' loaded at start-up already
  contains proper calls to `.composite'.]

  Please refer to the info pages of groff and to the groff_char man page
  for more details.

o A new request `fschar' has been added to define font-specific fallback
  characters.  They are searched after the list of fonts declared with the
  `fspecial' request but before the list of fonts declared with `special'.

o Fallback characters defined with `fschar' can be removed with the
  new `rfschar' request.

o A new request `schar' has been added to define global fallback
  characters.  They are searched after the list of fonts declared with the
  `special' request but before the already mounted special fonts.

o In groff versions 1.18 and 1.18.1, \D'f ...' didn't move the current
  point horizontally.  Despite of being silly, this change has been
  reverted for backwards compatibility.  Consequently, the intermediate
  output command `Df' also moves the position horizontally again.

  \D'f ...' is deprecated since it depends on the horizontal resolution of
  the output device (given with the `hor' parameter in the DESC file).
  Use the new \D'Fg ...' escape instead.

o For orthogonality, new \D subcommands to change the fill color are
  available:

    \D'Fr ...' (rgb)
    \D'Fc ...' (cmy)
    \D'Fg ...' (gray)
    \D'Fk ...' (cmyk)
    \D'Fd'     (default color)

  The arguments are the same as with the `defcolor' request.  The current
  position is *not* changed.

o The values set with \H and \S are now available in number registers
  \n[.height] and \n[.slant], respectively.

o The `.pe' number register isn't new but hasn't been documented before.
  It is set to 1 during a page ejection caused by the `bp' request.

o The new glyph symbol `tno' is a textual variant of `no'.

o The new glyph symbol `+e' represents U+03F5, GREEK LUNATE EPSILON SYMBOL.
  (Well, it is not really new since it has been previously supported by
  grolj4.)  The mapping for both the dvi and lj4 symbol font has been
  changed accordingly so that Greek small letter epsilon, `*e', has the
  same glyph shape as with other devices.

Grops
-----

o The font `freeeuro.pfa' has been added to provide various default glyph
  shapes for `eu' and `Eu'.

o It is now possible to access all glyphs in a Type 1 font, not only 256
  (provided the font file created by afmtodit has proper entries).  grops
  constructs additional encoding vectors on the fly if necessary.

o The paper size is now emitted via the %%DocumentMedia and PageSize
  mechanisms so that it is no longer required to tell `gv' or `ps2pdf'
  about the paper size.  The `broken' flag value 16 omits this feature
  (the used PostScript command `setpagedevice' is a LanguageLevel 2
  extension).  Patch by Egil Kvaleberg <egil@kvaleberg.no>.

o Non-slanted PostScript metrics have been changed again; they no longer
  contain negative left italic correction values.  This assures correct
  spacing with eqn.

Grodvi
------

o The font cmtex10 has been added as the special font `SC' to the DVI fonts.
  It is used as a font-specific special font for CW and CWI.

o New options -l and -p to set landscape orientation and the paper size.
  grodvi now emits a `papersize' special which is understood by DVI drivers
  like dvips.

  Consequently, the DESC file should contain a `papersize' keyword.

o The glyph shapes for \[*f] and \[*e] have been exchanged with \[+f] and
  \[+e], respectively, to be in sync with all other devices.

o Glyphs \[HE] and \[DI] have been replaced with \[u2662] and \[u2661],
  respectively, since the former two glyphs have a black (filled) shape
  which grodvi doesn't provide by default (it never has actually).

Grolj4
------

o The glyphs \[*e] and \[+e] have been exchanged to be in sync with
  all other devices.

o The glyph \[~=] is now called \[|=].  Similar to other devices, \[~=]
  is now another name for glyph \[~~].

Grotty
------

o New option `-r'.  It is similar to the -i option except it tells grotty to
  use the `reverse video' attribute to render italic fonts.

Pic
---

o New command `figname' to set the name of a picture's output box in TeX
  mode.

Refer
-----

o The environment variable `REFER' to override the name of the default
  database isn't new but hasn't been documented before.

Soelim
------

o New option `-r' to avoid emission of `.lf' lines.

o New option `-t' to emit TeX comment lines (giving current file and the
  line number) instead of `.lf' lines.

Afmtodit
--------

o Unencoded glyphs in an AFM file are output also (since grops can now emit
  multiple encoding vectors for a single font).

o New option `-m' to prevent negative left italic correction values.

o The mapping and encoding file together with file `DESC' are now searched
  in the default font directory also.  Please refer to the man page of
  afmtodit for more details.

Macro Packages
--------------

o Larry Kollar <kollar@alltel.net> and others made the man macros more
  customizable.

  . New command line options -rFT, -rIN, and -rSN to set the vertical
    location of the footer line, the body text indentation, and the
    sub-subheading indentation.

  . New command line option -rHY (similar to the ms macros) to control
    hyphenation.

  . New macros `.PT' and `.BT' to print the header and footer strings.
    They can be replaced with a customized version in `man.local'.

  . The string `HF' now holds the typeface to print headings and
    subheadings.

  . Similar to the ms macros, the LT register now defaults to LL if not
    explicitly specified on the command line.

o troff's start-up file `troffrc' now includes `papersize.tmac' to set
  the paper size with the command line option `-dpaper=<size>'.

  Possible values for `<size>' are the same as the predefined `papersize'
  values in the DESC file (only lowercase; see the groff_font man page)
  except a7-d7.  An appended `l' (ell) character denotes landscape
  orientation.  Examples: `a4', `c3l', `letterl'.

  Most output drivers need additional command line switches `-p' and
  `-l' to override the default paper length and orientation as set in
  the driver specific DESC file.

  For example, use the following for PS output on A4 paper in landscape
  orientation:

    groff -Tps -dpaper=a4l -P-pa4 -P-l -ms foo.ms > foo.ps

Revision 1.6: download - view: text, markup, annotated - select for diffs
Tue Feb 25 10:17:11 2003 UTC (23 years, 8 months ago) by wiz
Branches: MAIN
Diff to: previous 1.5: preferred, colored
Changes since revision 1.5: +2 -1 lines
Make ``.Nm ""'' work. Patch from Christian Limpach (chris at pin lu)
on tech-userlevel. PKGREVISION -> 1.

Revision 1.5: download - view: text, markup, annotated - select for diffs
Sun Jan 5 01:07:57 2003 UTC (23 years, 10 months ago) by salo
Branches: MAIN
CVS tags: netbsd-1-6-1-base, netbsd-1-6-1
Diff to: previous 1.4: preferred, colored
Changes since revision 1.4: +1 -3 lines
Sync PLIST with reality on Solaris.  Switch to new automatic PLIST.${OPSYS}
handling.

XXX: Other OSes might need to use the same PLIST as Solaris does but i can't
     test it.

Revision 1.4: download - view: text, markup, annotated - select for diffs
Sat Jan 4 11:20:13 2003 UTC (23 years, 10 months ago) by wiz
Branches: MAIN
Diff to: previous 1.3: preferred, colored
Changes since revision 1.3: +6 -2 lines
Update to 1.18.1.
[XXX: Solaris PLIST needs merging/update]

Changes since 1.16.1:
[If you don't read all of them, please note at least that you will
have to use less's -R option to view man pages, like
``${PREFIX}/bin/nroff -mdoc somemanpage.1 | less -R'' .]

VERSION 1.18.1
==============

Troff
-----

o The non-slanted PostScript font definition files have been regenerated to
  include left and right italic correction values. Applying those to a glyph
  (this is, prepending the glyph with `\,' and appending `\/' to the glyph)
  sets the glyph width to the real value given by the horizontal bounding
  box values. Without those escapes, the advance width for the particular
  glyph is used (which can differ considerably).

  Most users will neither need this feature nor notice a difference in
  existing documents (provided \, and \/ is used as advertised, namely for
  italic fonts only); its main goal is to improve image generation with
  grohtml.

  This is an experimental change, and feedback is welcome.

Tbl
---

o Added global option `nospaces' to ignore leading and trailing spaces in
  data items.

Grolbp
------

o The option -w (--linewidth) has been added (similar to other device
  drivers) to set the default line width.

Grn
---

o Support for b-spline and Bezier curves has been added.

Groffer
-------

o New option `--shell' to select the shell under which groffer shall run.

Macro Packages
--------------

o The string `Am' (producing an ampersand) has been added to mdoc for
  compatibility with NetBSD.

o `.IX' is now deprecated for mom; you should use `.IQ' (Indent Quit)
  instead.

o In mom, new inlines `FWD', `BCK', `UP', and `DOWN' deal with horizontal
  and vertical movements; please refer to contrib/mom/NEWS for more
  details.

o New macro ENDNOTES_HDRFTR_CENTER for mom to better control headers.

Miscellaneous
-------------

o The `papersize' keyword in the DESC file now accepts multiple arguments.
  It is scanned from left to the right, and the first valid argument is
  used. This makes it possible to provide a fallback paper size.

  Example:

    papersize /etc/papersize a4

o A local font directory has been prepended to the default font path; it
  defaults to /usr/local/share/groff/site-font.  Similar to the normal
  font searching process, files must be placed into a devXXX subdirectory,
  e.g.

    /usr/local/share/groff/site-font/devps/FOO

  for a PostScript font definition file FOO.


VERSION 1.18
============

***************************************************************************
*                                                                         *
*  PLEASE READ THE CHANGES BELOW REGARDING GROTTY, GROFF'S TTY FRONTEND.  *
*                                                                         *
***************************************************************************

Troff
-----

o Color support has been added to troff and pic (and to the device drivers
  grops, grodvi, grotty, and grohtml -- other preprocessors and drivers will
  follow).  A new function `defcolor' defines colors; the escape sequence
  `\m' sets the drawing color, the escape sequence `\M' specifies the
  background color for closed objects created with \D'...' commands.
  `\m[]' and `\M[]' switch back to the previous color.  `\m' and `\M'
  correspond to the new troff output command sets starting with `m' and
  `DF'.  The device-specific default color is called `default' and can't be
  redefined.

  Use the `color' request to toggle the usage of colors (default is on); the
  read-only register `.color' is 0 if colors are not active, and non-zero
  otherwise.

  The old `Df' output command is mapped onto `DFg'; all color output
  commands don't change the current font position (consequently, `Df'
  doesn't either).

  Outputting color can be disabled in troff and groff with the option -c
  (it is always disabled in compatibility mode).  See the section on grotty
  for the GROFF_NO_SGR environment variable also.

  For defining color components as fractions between 0 and 1, a new scaling
  indicator `f' has been introduced: 1f = 65536u.  For testing whether a
  color is defined (with .if and .ie), a new conditional operator `m' is
  available.

  More details can be found in the groff_diff.7 manual page and in
  groff.texinfo.

o Similar to \m and \M, \f[] switches back to the previous font.  \fP
  (and \f[P]) is still valid for backwards compatibility.

o The new escape \F is the same as `.fam'; \F[] switches back to previous
  family -- \F[P] selects family `P'.

o Two new glyph symbols are available: `eu' is the official Euro symbol;
  `Eu' is a font-specific glyph variant.

o The new glyph symbols `t+-', `tdi', and `tmu' are textual variants of
  `+-', `di', and `mu', respectively.

o Latin-1 character 181 (PS name `mu', Unicode name U+00B5 MICRO SIGN) has
  got the troff glyph name `mc'.

o -Tutf8 is now available on EBCDIC hosts.

o Strings can take arguments, using this syntax: \*[foo arg1 arg2 ...].
  Example:

    .ds xxx This is a \\$1 test.
    \*[xxx nice]

o It is now possible to have whitespace between the first and second dot (or
  the name of the ending macro) to end a macro definition.  Example:

    .de !
    ..
    .
    .de foo
    .  nop Hello, I'm `foo'.
    .  nop I will now define `bar'.
    .  de bar !
    .    nop Hello, I'm `bar'.
    .  !
    ..

o `.fn' is a new string-valued register which returns the (internal) real
  font name; styles and families are properly concatenated.

o Three new read/write registers `seconds', `minutes', and `hours' contain
  the current time, set at start-up of troff.  Use the `af' request to
  control their output format.

o The new request `fchar' can be used to provide fallback characters.  It
  has the same syntax as the `char' request; the only difference is that a
  character defined with `.char' hides the glyph with the same name in the
  current font, whereas a character defined with `.fchar' is checked only if
  the particular glyph isn't found in the current font.  This test happens
  before checking special fonts.

o In analogy to the `tmc' request, `.writec' is the same as `.write' but
  doesn't emit a final newline.

o The new request `itc' is a variant of `.it' for which a line interrupted
  with \c counts as one input line.

o Two new requests `ds1' and `as1' which are similar to `ds' and `as' but
  with compatibility mode disabled during expansion of strings defined by
  them.

o The syntax of the `substring' request has been changed: The first
  character in a string now has index 0, the last character has index -1.
  Note that this is an incompatible change.

o To emit strings directly to the intermediate output, a new `output'
  request has been added; it is similar to `\!' used at the top level.

o `.hpf' has been extended.  It can now handle most TeX hyphenation
  pattern files without modification.  To do that, the commands \patterns,
  \hyphenation, and \endinput are recognized.  Please refer to groff_diff.7
  for more information.

o `hpfcode' is a new request to provide an input encoding mapping for the
  `hpf' request.

o The new request `hpfa' appends hyphenation patterns (`hpf' replaces
  already existing patterns).

o A new request `ami' (append macro indirect) has been added.  The first and
  second parameter of `ami' are taken from string registers rather than
  directly; this very special request is needed to make `trace.tmac'
  independent from the escape character (which might even be disabled).

o The new request `sizes' is similar to the `sizes' command in DESC files.
  It expects the same syntax; the data must be on a single line, and the
  final `0' can be omitted.

o `trin' (translate input) is a new request which is similar to `tr' with
  the exception that the `asciify' request will use the character code (if
  any) before the character translation.  Example:

    .trin ax
    .di xxx
    a
    .br
    .di
    .xxx
    .trin aa
    .asciify xxx
    .xxx

  The result is `x a'.  Using `tr', the result would be `x x'.

o The request `pvs' isn't new, but hasn't been documented before.  It
  adds vertical space after a line has been output.  This makes it an
  alternative to the `ls' request to produce double-spaced documents.
  The read-only register `.pvs' holds the current amount of the
  post-vertical line space.

o For compatibility with plan 9's troff, multiple `pi' requests are
  supported:

    .pi foo
    .pi bar

  is now equivalent to

    .pi foo | bar

o A new escape sequence `\O' is available to disable and enable glyph
  output.  Please see groff_diff.7 and groff.texinfo for more details.

o The escapes `\%', `\&', `\)', and `\:' no longer cause an error in \X;
  they are ignored now.  Additionally `\ ' and `\~' are converted to
  single space characters.

o The default tab distance in nroff mode is now 0.8i to be compatible
  with UNIX troff.

o Using the latin-1 input character 0xAD (soft hyphen) for the `shc'
  request was a bad idea.  Instead, it is now translated to `\%', and
  the default hyphenation character is again \[hy].  Note that the glyph
  \[shc] is not useful for typographic purposes; it only exists to have
  glyph names for all latin-1 characters.

Macro Packages
--------------

o Peter Schaffter <df191@ncf.ca> has contributed a new major macro package
  called `mom', mainly for non-scientific writers, which takes care of
  many typographic issues.  It comes with a complete reference (in HTML
  format) and some examples.  `mom' has been designed to format documents
  for PostScript output only.

o Two macros `AT' (AT&T) and `UC' (Univ. of California) have been added to
  the man macros for compatibility with older BSD releases.

o Both the man and mdoc macro packages now use the LL and LT registers for
  setting the line and title length, respectively (similar to those
  registers in the ms macro package).  If not set on the command line or
  in a macro file loaded before the macro package itself, they default to
  78n in nroff mode and 6.5i in troff mode.

o The `-xwidth' specifier in the mdoc macro package has been removed.  Its
  functionality is now integrated directly into `-width'.  Similarly,
  `-column' has been extended to provide this functionality also.

o A new macro `Ex' has been added to the mdoc macro package to document an
  exit status.

o The PSPIC macro has been extended to work with DVI output (`pspic.tmac' is
  now automatically loaded for -Tdvi), using a dvips special to load the EPS
  file.

o The trace.tmac package now traces calls to `am' also.  Additionally, it
  works in compatibility mode.

o `troff.1' has been split.  Differences to UNIX troff are now documented
  in the new man page `groff_diff.7'.

o `groff_mwww.7' has been renamed to `groff_www.7'.  The file mwww.tmac
  has been removed.

o `groff_ms.7' has been completely rewritten.  It now contains a complete
  reference to the ms macros.

o `groff_trace.7' documents the trace macro package.

o Changes in www.tmac:

    Note that HTML support is still in alpha change, so it is rather likely
    that both macro names and macro syntax will change.  Some of the macros
    mentioned below aren't really new but haven't been documented properly
    before.

    The following macros have been renamed:

        MAILTO     -> MTO
        IMAGE      -> IMG
        LINE       -> HR

    For consistency, the macros `URL', `FTL', and `MTO' now all have the
    address as the first parameter followed by the description.

    By default, grohtml generates links to all section headings at the top
    of the document.  Use the new `LK' macro to specify a different place.

    For specifying the background color and a background image, use the
    new macros `BCL' and `BGIMG', respectively.

    The macro `NHR' has been added; it suppresses the generation of top and
    bottom rules which grohtml emits by default.

    The new macro `HX' determines the cut-off point for automatic link
    generation to headings.

    The image position parameter names in `IMG' have been changed to `-L',
    `-R', and `-C'.

    New macro `PIMG' for inclusion of a PNG image (it will automatically
    convert it into an EPS file if not -Thtml is used).

    New macro `MPIMG' for putting a PNG image into the left or right margin
    (it will automatically convert it into an EPS file if not
    -Thtml is used).

    New macros `HnS', `HnE' to start and end a header line block.

    New macro `DC' to produce dropcap characters.

    New macro `HTL' to generate an HTML title line only but no H1 heading.

    New macros `ULS' and `ULE' to start and end an unordered list.  The new
    macro `LI' inserts a list item.

Groff
-----

o The new command line option `-c' disables color output (which is always
  disabled in compatibility mode).

Nroff
-----

o Two new command line options `-c' and `-C'; the former passes `-c' to
  grotty (switching to the old output scheme); the latter passes `-C' to
  groff (enabling compatibility mode).

Pic
---

o New keywords `color' (or `colour', `colored', `coloured'), `outline' (or
  `outlined'), and `shaded' are available.  `outline' sets the color of the
  outline, `shaded' the fill color, and `color' sets both.  Example:

    circle shaded "green" outline "black" ;

  Filled arrows always use the outline color for filling.

  Color support for TeX output is not implemented yet.

Pic2graph
---------

o A new script contributed by Eric S. Raymond <esr@thyrsus.com>.  It
  converts a PIC diagram into a cropped image.  Since it uses gs and the PNM
  library, virtually all graphics formats are available for output.

Eqn2graph
---------

o A new script contributed by Eric S. Raymond <esr@thyrsus.com>.  It
  converts an EQN diagram into a cropped image.  Since it uses gs and the PNM
  library, virtually all graphics formats are available for output.

Groffer
-------

o A new script contributed by Bernd Warken <bwarken@mayn.de>.  It displays
  groff files and man pages on X and tty, taking care of most parameters
  automatically.

Grog
----

o Documents using the mom macro package are recognized.

Grops
-----

o Color support has been added.

o A new option `-p' is available to select the output paper size.  It has
  the same syntax as the new `papersize' keyword in the DESC file.

Grodvi
------

o By default, font sizes are now available in the range 5-10000pt, similar
  to PS fonts. If you want the old behaviour (i.e., font sizes at discrete
  values only), insert the following at the start of your document:

    .if '\*[.T]'dvi' \
    .  sizes 500 600 700 800 900 1000 1095 1200 1400 1440 1600 \
             1728 1800 2000 2074 2200 2400 2488 2800 3600

o A new font file HBI (using cmssbxo10; this is slanted sans serif bold
  extended) has been added.

o Two font families are now available: `T' and `H'.

o EC and TC fonts have been integrated.  Use `-mec' (calling the file
  ec.tmac) to switch to them.  Those fonts give a much better coverage of
  the symbols defined by groff than the CM fonts.

  Note that ec.tmac must be called before any language-specific files; it
  doesn't take care of hcode values.

o Color support has been added.  For drawing commands, colors are translated
  to gray values currently.

Grotty
------

o Color support has been added, using the SGR (ISO 6429, sometimes called
  ANSI color) escape sequences.

o SGR escape sequences are now used by default for underlining and bold
  printing also, no longer using the backspace character trick.  To revert
  to the old behaviour, use the `-c' switch.

  Note that you have to use the `-R' option of `less' to make SGR escapes
  display correctly.  On the other hand, terminal programs and consoles like
  `xterm' which support SGR sequences natively can directly display the
  output of grotty.  Consequently, the options `-b', `-B', `-u', and `-U'
  work only in combination with `-c' and are ignored silently otherwise.

  For the `man' program, it may be necessary to add the `-R' option of
  `less' to the $PAGER environment variable; alternatively, you can use
  `man's `-P' option (or adapt its configuration file accordingly).  See
  man(1) for more details.

o If the environment variable GROFF_NO_SGR is set, SGR output is disabled,
  reverting to the old behaviour.

o A new special \X'tty: sgr n' has been added; if n is non-zero or missing,
  enable SGR output (the default).

o If the new option `-i' is used (only in SGR mode), grotty sends escape
  sequences to set the italic font attribute instead of the underline
  attribute for italic fonts.  Note that many terminals don't have support
  for this (including xterm).

Grohtml
-------

o Color support for glyphs has been added.

o New option `-h' to select the style of headings in HTML output.

o New option `-b' to set the background colour to white.

o New options `-a' and `-g' to control the number of bits for anti-aliasing
  used for text and graphics, respectively.  Default value is 4; 0 means
  no anti-aliasing.

o groff character/glyph entities now map onto HTML 4 character entities.

Grolbp
------

o Valid paper sizes are now specified as with the new `papersize' keyword
  in the DESC file.  Specifically, the old custom paper type format
  `custAAAxBBB' is no longer supported.

Miscellaneous
-------------

o A new manual page `ditroff.7' is available.

o The groff texinfo manual will now be installed, together with a bunch
  of examples.

o A new keyword `papersize' has been added to the DESC file format.  Its
  argument is either

  . a predefined paper format (e.g. `A4' or `letter')

  . a file name pointing to a file which must contain a paper size
    specification in its first line (e.g. `/etc/papersize')

  . a custom paper size definition like `35c,4i'

  See groff_font(5) for more details.  This keyword only affects the
  physical dimensions of the output medium; grops, grolj4, and grolbp use it
  currently.  troff completely ignores it.

VERSION 1.17.2
==============

This is major bug-fixing release which should replace 1.17.1.

Troff
-----

o The `IMAGE' macro in www.tmac has changed: Now the optional 2nd parameter
  gives the horizontal image location (left, centered, or right), and the
  optional 3rd and 4th parameter the image dimensions.

VERSION 1.17.1
==============

This is mainly a bug-fixing release.

Troff
-----

o Two new requests `de1' and `am1' which are similar to `de' and `am' but
  with compatibility mode disabled during expansion of macros defined by
  them.

o Added request `brp'.  This is the same as `\p'.

o Similar to other versions of troff, the `ns' request now works in all
  diversions, not only in the top-level one.

o New read-only number register `.ns'.  Returns 1 if in no-space mode,
  0 otherwise.

Nroff
-----

o Options -p (pic) and -t (tbl) added.

o The environment variable GROFF_BIN_PATH is now checked before PATH for
  finding groff.

Grohtml
-------

o New option `-D dir' to specify a directory in which all images are placed.

o New option `-I stem' to specify an image name stame.  If not given,
  `grohtml-XXX' is used (`XXX' is the process ID).

VERSION 1.17
============

Groff
-----

o `-mFOO' now searches first for `FOO.tmac' and then for `tmac.FOO'.  The
  old behaviour has been changed to overcome problems with platforms which
  have an 8+3 file name limit, and platforms which have other versions of
  troff installed also.  Additionally, all macro files have been renamed
  using the latter scheme to avoid 8+3 name clashes.

o The new environment variable GROFF_BIN_PATH is checked for programs groff
  is calling (preprocessors, troff, and output devices) before PATH.  If not
  set, it defaults to the directory where the groff binary is located.
  Previously, it was PATH only.  The nroff script only uses GROFF_BIN_PATH
  to find the groff binary but passes both the GROFF_BIN_PATH and PATH
  environment variables to groff.

Troff
-----

o The mdoc package has been completely rewritten, using the full power of
  GNU troff to remove limitations of Unix troff (which is no longer
  supported).  Most important changes are:

  . No argument limit
  . Almost all macros are parsed and callable (if it makes sense)
  . `.Lb': prints library names
  . `.Nm <punctuation>' now works as expected; `.Nm "" <punctuation>' has
    been withdrawn
  . Updated `.St' command
  . `.Fx': prints FreeBSD
  . `.Ox': prints OpenBSD
  . `.Bsx': prints BSD/OS
  . `.Brq', `.Bro', `.Brc': brace enclosure macros
  . `.Bd -centered': center lines
  . `.Bl -xwidth <string>': interpret <string> and use the resulting width
  . Support for double-sided printing (-rD1 command line switch)
  . Support for 11pt and 12pt document sizes (-rS11, -rS12 command line
    switches)

  `groff_mdoc.7' replaces `groff_mdoc.samples.7'; it now completely
  documents the mdoc package.

  Great care has been taken to assure backwards compatibility.  If you
  encounter any abnormal results, please report them to bug-groff@gnu.org.

o A new command line option for the `man' macros (similar to the `mdoc'
  package) has been implemented: `-rcR=1' (now the default in nroff mode)
  produces one single, very long page instead of multiple pages.  `-rcR=0'
  deactivates it.

o The `return' request has been added to return immediately from a macro.

o A new request `nop' (no operation) has been added which is similar to
  `if 1'.  For example,

    .if t \{\
    Hallo!
    .\}

  can now be written as

    .if t \{\
    .  nop Hallo!
    .\}

o `box' and `boxa' are two new requests which behave similarly to `di' and
  `da' but don't include a partially filled line (which is restored after
  ending the diversion).

o The `asciify' request has been extended to `unformat' space characters
  and some other escape sequences also.

  `\ ' is no longer unformatted as a space but remains an unpaddable,
  unbreakable space character.

o The new `unformat' request is similar to `asciify' but only handles space
  characters and tabs specially if the diversion is reread, retaining font
  information.  This makes it possible to reformat diversions; for example
  the following

    .ll 3i
    .
    a01 a02 a03 a04 a05 a06 a07 a08 a09 a10.
    .
    .box box1
    .ev 1
    .nf
    \f[B]b01 b02 b03 b04 b05 b06 b07 b08 b09 b10.\f[P]
    .br
    .ev
    .box
    .
    c01 c02 c03 c04 c05 c06 c07 c08 c09 c10.
    .
    .unformat box1
    .box1

  gives

    a01  a02  a03  a04 a05 a06 a07
    a08 a09 a10.  c01 c02 c03  c04
    c05  c06 c07 c08 c09 c10.  b01
    b02 b03 b04 b05  b06  b07  b08
    b09 b10.

  Without the `unformat' request, space characters are converted to word
  space nodes which are no longer stretchable, and the result would be

    a01  a02  a03  a04 a05 a06 a07
    a08 a09 a10.  c01 c02 c03  c04
    c05  c06 c07 c08 c09 c10.  b01
    b02 b03 b04 b05 b06 b07 b08
    b09 b10.

o The new request `linetabs' controls the `line-tabs' mode.  In line-tabs
  mode, tab distances are computed relative to the (current) output line.
  Otherwise they are taken relative to the input line.  For example, the
  following

    .ds x a\t\c
    .ds y b\t\c
    .ds z c
    .ta 1i 3i
    \*x
    \*y
    \*z

  yields

    a         b         c

  In line-tabs mode, the same code gives

    a         b                   c

  The new read-only number register `.linetabs' returns 1 if in line-tabs
  mode, and 0 otherwise.

o Two new requests `tm1' and `tmc' have been added to improve writing
  messages to the terminal.  `tm1' is similar to `tm' but allows leading
  whitespace.  `tmc' is similar to `tm1' but doesn't emit a final newline.

o For compatibility with sqtroff, the request `output' has been added.
  The behaviour is similar to `\!' at the top-level, that is, it directly
  inserts its argument into the intermediate output format.  The syntax
  is similar to .tm1, allowing leading whitespace.

o The new `spreadwarn' request will make troff warn if spaces in an output
  line are widened by a given limit or more.

o Use `warnscale' to change the scaling indicator troff will use for
  warning messages.

o A new request `dei' (define indirect) has been added.  The first and
  second parameter of `dei' are taken from string registers rather than
  directly; this very special request is needed to make `trace.tmac'
  independent from the escape character (which might even be disabled).

o It is now possible to save and restore the escape character with two new
  requests `ecs' and `ecr'.

o The new escape sequence \B'...' is an analogon to `\A': If the string
  within the delimiters is a valid numeric expression, return character `1',
  and `0' otherwise.

o The new escape sequence `\:' inserts a zero-width break point.  This is
  similar to `\%' but without a soft hyphen character.

o The `tr' request can now map characters onto `\~'.

o Calling the `fam' request without an argument switches back to the
  previous font family.

o The new read-only register `.int' is set to a positive value if the last
  output line is interrupted (i.e., if the input line contains `\c').

o The `writem' request is not new, but hasn't been documented before.  This
  is similar to `write' but instead of a string the contents of a given
  macro or string is written to a stream.

o The read/write number register `hp' to get/set the current horizontal
  position relative to the input line isn't new but hasn't been documented
  properly before.

o `\X' and `\Y' are now transparent for end-of-sentence recognition.

o The `cu' request in nroff mode now works as documented (i.e., it
  underlines spaces also).

Grog
----

o The grog script now works in non-compatibility mode also (which is the
  default).  As usual, use the `-C' option to activate compatibility mode.

Grops
-----

o A new option `-P' resp. a new environment variable `GROPS_PROLOGUE' has
  been added to select a different prologue file.

o The effect of the former `-mpsnew' option to access more Type 1 characters
  is now the default and no longer available.  To get the old behaviour
  (i.e., emulation of some glyphs by composition) use `-mpsold'.

Miscellaneous
-------------

o For security reasons the following changes have been done:

  . The tmac.safer file has been replaced with a built-in solution; .open,
    .opena, .pso, .sy, and .pi are completely disabled in safer mode (which
    is the default); to enable these requests the `-U' command line flag
    must be used.

  . Files specified with the .mso request or given with the `-m' command
    line option, and hyphenation patterns loaded with `.hpf' are no longer
    searched in the current directory by default (besides the usual tmac
    path).  Instead, the home directory is used.  To add the current
    directory, either use the `-U' or `-M' command line option or set the
    GROFF_TMAC_PATH environment variable to an appropriate value.

  . troffrc, troffrc-end, and eqnrc are neither searched in the current nor
    in the home directory (even if -U is given).  Use -M or GROFF_TMAC_PATH
    to change that.

  . Similarly, the current directory is no longer part of the font path.
    Use the `-F' command line option or the GROFF_FONT_PATH environment
    variable if you really need the current directory.

o groff now installs its data files into /usr/local/share/groff/<version> by
  default, following the GNU standard.  Additionally, a local tmac directory
  (by default /usr/local/share/groff/site-tmac) is scanned before the
  standard tmac directory.  Wrapper files for system-specific macro packages
  (if necessary) are put into /usr/local/lib/groff/site-tmac; this directory
  is searched before the local tmac directory.

o All programs now have option `-v' to show the version number; they exit
  immediately afterwards, following the GNU standards.  Additionally,
  `--version' and `--help' have been added, doing the obvious actions.

Revision 1.3: download - view: text, markup, annotated - select for diffs
Tue Aug 21 14:56:44 2001 UTC (25 years, 3 months ago) by wiz
Branches: MAIN
CVS tags: pkgviews-base, pkgviews, netbsd-1-6-RELEASE-base, netbsd-1-6, netbsd-1-5-PATCH003, buildlink2-base, buildlink2
Diff to: previous 1.2: preferred, colored
Changes since revision 1.2: +2 -2 lines
.ifdef wants the variable name without ${}.

Revision 1.2: download - view: text, markup, annotated - select for diffs
Thu Aug 16 14:43:44 2001 UTC (25 years, 3 months ago) by wiz
Branches: MAIN
Diff to: previous 1.1: preferred, colored
Changes since revision 1.1: +9 -1 lines
Fix PLIST on Solaris, and honor PAPERSIZE setting.
From Peter L. Petersen in private mail.

Revision 1.1.1.1 (vendor branch): download - view: text, markup, annotated - select for diffs
Mon May 14 14:08:08 2001 UTC (25 years, 6 months ago) by wiz
Branches: TNF
CVS tags: pkgsrc-base
Diff to: previous 1.1: preferred, colored
Changes since revision 1.1: +0 -0 lines
Initial import of groff-1.16.1 -- GNU groff text formatting system.

Revision 1.1: download - view: text, markup, annotated - select for diffs
Mon May 14 14:08:08 2001 UTC (25 years, 6 months ago) by wiz
Branches: MAIN
Initial revision

Diff request

This form allows you to request diffs between any two revisions of a file. You may select a symbolic revision name using the selection box or you may type in a numeric name using the type-in text box.

Log view options

CVSweb <webmaster@jp.NetBSD.org>