Up to [cvs.NetBSD.org] / pkgsrc / sysutils / dbus
Request diff between arbitrary revisions
Keyword substitution: kv
Default branch: MAIN
dbus: comment out Solaris-only flag not supported on Illumos, says meson; I don't know how to check for that in particular, but we have Illumos bulk builds and none for Solaris, so let's fix these.
dbus: update to 1.16.4. dbus 1.16.4 (2026-11-12) ======================== Security support scope: • Add `SECURITY.md` documenting various security considerations (dbus!597, dbus!603, dbus!606; Simon McVittie, ooonea) Denial-of-service fixes: • Prevent a denial-of-service vulnerability on the system bus: if a privileged user was running a monitor such as `dbus-monitor --system` or `busctl monitor --system`, then an unprivileged user could cause the dbus-daemon to crash by arranging for delivery of a broadcast signal from the dbus-daemon to be prevented, for example by filling up the outgoing message queue towards a client that subscribed to it. This vulnerability could be seen as an incomplete fix for CVE-2023-34969. Thanks to Ma Penghui, KylinSoft Corporation. (dbus#576, CVE-2026-120749; Simon McVittie, David King) • Prevent a denial-of-service vulnerability on the system bus in which a client could cause a busy-loop by shutting down its socket while outgoing messages were pending. Thanks to AISLE in partnership with Red Hat. (dbus#587, RHEL-239613, CVE ID pending; David King, Simon McVittie) • On platforms that implement `struct cmsgcred` (in practice this is believed to mean FreeBSD and DragonFlyBSD), prevent a denial-of-service in which a local `AF_UNIX` client could send unexpected file descriptors to the system bus, which would have been ignored but not closed. Thanks to AISLE in partnership with Red Hat. (dbus#588, RHEL-239934, CVE ID pending; Simon McVittie, David King) • On platforms where poll() is emulated using select() (in practice this is believed to mean macOS and Interix), prevent a denial-of-service in which the system bus would crash if file descriptors above 1024 were polled, and harden it against busy-looping if an invalid file descriptor was polled. Thanks to AISLE in partnership with Red Hat. (dbus#584, RHEL-239610, CVE ID pending; Simon McVittie) • In servers listening on the `nonce-tcp:` transport, do not allow a client to make the server block for more than 1 second. Use of this transport on multi-user systems is discouraged. Thanks to AISLE in partnership with Red Hat. (dbus#586, RHEL-239294, CVE ID pending; David King, Simon McVittie) Bug fixes: • Avoid a busy-loop on non-Linux operating systems that can report end-of-stream with POLLHUP but neither POLLIN nor POLLERR, such as FreeBSD and OpenBSD (dbus#553, Gleb Popov) • Avoid a possible busy-loop when blocking on a DBusPendingCall with its timeout set to DBUS_TIMEOUT_INFINITE (dbus!524, dbus!525; Gleb Popov, Simon McVittie) • Avoid a rare assertion failure when waiting on a condition variable (dbus#556, Johan Bolmsjö) • Defend against fd watches potentially being removed by a watch callback (dbus#585, RHEL-239597; Simon McVittie, David King) • Fix a memory leak during autolaunching if dbus-launch or launchctl fails (dbus!560, Oleg Tsvetkov) • Correct commented-out default auth_timeout in system.conf (dbus!519, Simon McVittie) • When built with Meson, fix CMake builds that discover libdbus via CMake rather than pkg-config metadata (dbus!542, Zephyr Lykos) • When built with Meson and fallback subprojects are enabled, disable unnecessary features and try to link them statically (dbus!516, Simon McVittie) • On non-Linux platforms, never try to compile with Linux epoll support, even if the OS has a compatibility interface for epoll (dbus#557; Alan Coopersmith, Jonathan Perkins) • Fix compiler warnings in dbus-send(1) (dbus!558, dbus!559; Simon McVittie) • Avoid deprecation warnings if compiled against Expat 2.9.0 or later (dbus!561, dbus!564; Oleg Tsvetkov, Simon McVittie) • Update fallback subprojects for GLib and Expat (dbus!426, dbus!429, dbus!576; Simon McVittie) Internal changes: • Skip a known-failing test on all FreeBSD versions (dbus#308, Simon McVittie) • Fix test failure if DBUS_TEST_DBUS_MONITOR is unset (dbus#424, Philip Withnall) • CI fixes (dbus#546, dbus#547, dbus#548, dbus#558, dbus#572, dbus#578, dbus#580, dbus#582, dbus!528, dbus!531, dbus!556, dbus!557, dbus!569, dbus!577, dbus!580, dbus!589, dbus!599; Simon McVittie, Gleb Popov, Ralf Habacker)
*: recursive bump for pcre2 10.49
*: revbump for pcre2 symbol versioning change
*: recursive bump for pcre2 10.48
*: recursive bump for pcre2 Running an old binary against the new pcre doesn't work: /usr/pkg/lib/libpcre2-8.so.0: version PCRE2_10.47 required by /usr/pkg/lib/libglib-2.0.so.0 not defined
dbus: Explicitly disable inotify on SunOS.
Work around 'ld: error: undefined symbol: environ' breakage on FreeBSD See e.g. <https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=268518>
dbus: Fix SunOS fallout.
dbus: fix pkg-config file Bump PKGREVISION.
dbus: update to 1.16.2.
Based in wip/dbus, tested by pin@
dbus 1.16.2 (2025-02-27)
========================
Build system:
• The branch used for development releases has been renamed to `main`.
Please see CONTRIBUTING.md for details of how to update existing checkouts.
(dbus#530, Simon McVittie)
Bug fixes:
• On Linux, fix build regression with libselinux ≥ 3.8 and verbose mode
enabled (Debian#1096212, dbus!511; Simon McVittie)
Internal changes:
• Documentation updates
dbus 1.16.0 (2024-12-16)
========================
The “one hundred pink frogs” release.
1.16.x is a new stable branch, superseding 1.14.x.
Summary of major changes between 1.14.x and 1.16.0
--------------------------------------------------
Build system and dependencies:
• The Meson build system is the recommended way to build dbus on Unix.
This requires Meson 0.56 and Python 3.5.
· Projects that depend on libdbus can build it as a Meson subproject.
See tests/use-as-subproject/meson.build for suggested build options.
• CMake continues to be available as an alternative build system,
and is recommended on Windows. This requires CMake 3.10.
• A C99 compiler such as gcc, clang, or Visual Studio 2015 is required.
A C11 compiler such as gcc, clang, or Visual Studio 2019 is recommended.
• On platforms with larger-than-64-bit pointers, a C11 compiler is required
Behaviour changes:
• As a result of the move from Autotools to Meson as the recommended
build system on Unix, the names of all build-time options have changed.
Not all Meson options are a 1:1 replacement for their closest equivalent
in Autotools, so the options used for a dbus build should be reviewed.
• If `meson install` is run as root, and traditional (non-systemd)
activation is enabled, the ownership and setuid permission of
dbus-daemon-launch-helper are not set automatically.
This is not the same as the historical behaviour of the Autotools build
system, which would set the ownership and permissions automatically if
run as uid 0.
The ownership and permissions must now be set by OS distribution packaging,
or as a manual post-installation step if dbus is installed directly
without going via a packaging system (which is not recommended).
• On Unix, the well-known system bus socket is in the runtime state
directory by default (normally /run)
(see 1.15.4 for more details)
• On Linux with systemd, dbus-daemon starts as the target user/group
(retaining CAP_AUDIT_WRITE) instead of starting as root and
dropping privileges
Feature removals:
• Autotools build system
• pam_console/pam_foreground integration
(Autotools --with-console-auth, CMake -DDBUS_CONSOLE_AUTH_DIR)
New features and significant bug fixes:
• ProcessFD in GetConnectionCredentials() on Linux
(see 1.15.8 for more details)
• On Unix, the system message bus now loads .service files from /etc and /run
• Use close_range() to close unwanted file descriptors or mark them
close-on-exec, if available
• Use 64-bit timestamps internally on 32-bit platforms, for Y2038 safety
• Use APIs that can return 64-bit timestamps and inode numbers on
32-bit glibc
• AF_UNIX sockets are available on sufficiently recent Windows
• dbus-send can send arrays of variants, variant values in dictionaries,
and nested variants
• Portability to CPU architectures with larger-than-64-bit pointers
Changes since 1.15.92 release candidate
---------------------------------------
Dependencies:
• Building with CMake now requires CMake ≥ 3.10.
Bug fixes:
• Avoid deprecation warnings with newer Meson versions
(dbus!507, Simon McVittie)
• Avoid deprecation warnings with newer CMake versions
(dbus#541, Ralf Habacker)
Tests and CI enhancements:
• When building with CMake, set the same environment variables as Meson.
This improves test coverage. (dbus#533, Ralf Habacker)
• Remove a remaining reference to Debian 11, which is EOL
(dbus!508, Simon McVittie)
dbus 1.15.92 (2024-12-11)
=========================
The "future flyer" release.
This is a second release-candidate for the new dbus 1.16.x stable branch.
Build-time configuration changes:
• When building with Meson, the embedded_tests option has been renamed
to intrusive_tests. This option adds test instrumentation in libdbus
and dbus-daemon, which reduces performance and is not secure.
For production builds of dbus in OS distributions, it must be false
(-Dintrusive_tests=false, which is the default)
During development, it should be set true (-Dintrusive_tests=true)
for full test coverage. (dbus#537, Simon McVittie)
• Similarly, when building with CMake, the DBUS_BUILD_TESTS option no
longer enables intrusive test instrumentation. A new option
-DDBUS_ENABLE_INTRUSIVE_TESTS=ON is equivalent to the Meson build
system's -Dintrusive_tests=true.
Bug fixes:
• If a DBusWatch callback fails because there is insufficient memory,
make sure to retry it within a finite time (dbus#536, Petr Malat)
• On macOS with launchd enabled, if the session bus launchd integration
is not correctly configured, don't treat that as a fatal error that
prevents connecting to the system bus (dbus#510, Mohamed Akram)
• If intrusive test instrumentation is enabled, older versions of dbus
would simulate an out-of-memory condition once per 2**32 allocations,
even if not specifically requested. This is no longer done.
(dbus#535, Simon McVittie)
• Fix compilation on non-Linux platforms with glibc, such as
Debian GNU/Hurd (dbus#539, Simon McVittie)
• Avoid test failures with non-trivial NSS modules, similar to dbus#256
(dbus#540, Simon McVittie)
• When built with CMake, make paths in DBus1Config relocatable
(dbus!499, Ralf Habacker)
dbus 1.15.90 (2024-12-06)
=========================
The “futuristic flyer” release.
This is a release-candidate for the new dbus 1.16.x stable branch.
Build-time configuration changes:
• The experimental Containers1 interface has been removed from this branch.
It is incomplete and not ready for production use, and has been
compile-time-disabled and impossible to enable without patching
since 1.13.20. To reduce confusion, delete the code completely.
It remains present on the git `main` branch for 1.17.x, and will
hopefully be reinstated during the 1.17.x cycle.
(dbus!488, dbus!490; Simon McVittie)
Bug fixes:
• Fix the Devhelp index for API documentation (dbus!486, Simon McVittie)
• Fix detection of socketpair() on Solaris 10 (dbus#531, Simon McVittie)
• Avoid undefined signed integer overflow when calculating hash table
indexes (dbus!487, Jami Kettunen)
dbus 1.15.12 (2024-10-29)
=========================
Enhancements:
• D-Bus Specification 0.43:
· Recommend loading system services from /etc/dbus-1/system-services
and /run/dbus-1/system-services (dbus!467, Luca Boccassi)
· Reorganise documentation of the message bus to make it easier to add
new interfaces (dbus!472, Simon McVittie)
· Document o.fd.DBus.Debug.Stats interface (dbus!472, Simon McVittie)
· Document o.fd.DBus.Verbose interface (dbus!472, Simon McVittie)
· Formatting improvements (dbus!471, dbus!472; Simon McVittie)
· Don't imply that all clients need to support obsolete message bus
implementations (dbus!471, Simon McVittie)
• API design advice:
· Document typical approaches to emulating nullable types in the D-Bus
type system (dbus!446, Zeeshan Ali Khan)
• On Unix, additionally load system services from:
· /etc/dbus-1/system-services, reserved for use by either the local system
administrator, or software such as asset managers and configuration
management frameworks acting on their behalf
· /run/dbus-1/system-services, for ephemeral services
(dbus!467, Luca Boccassi)
Bug fixes:
• Increase file descriptor soft limit to hard limit before testing file
descriptor passing, and correctly skip the test for flooding the bus
with fds when the limit is too low, fixing test failures on Solaris
(dbus#176, Alan Coopersmith)
• When building API documentation with Doxygen, always generate a working
link in the index HTML page
(dbus#519, dbus!470; Ralf Habacker, Simon McVittie)
• When building with Meson, add (more) test dependencies so that 'meson test'
does not always need to be preceded by 'meson compile'
(dbus!468, Simon McVittie)
• When installing with Meson, don't fail if we are installing as root but
the user/group that will own the setuid dbus-daemon-launch-helper do not
yet exist (dbus#492, Jordan Williams)
• When building with Meson on Solaris, fix detection and build of
Solaris audit API integration
(dbus!477, Alan Coopersmith)
• Fix service activation timeouts when built with embedded tests (test
instrumentation) and run on a platform with a large file descriptor limit
(dbus#527, Simon McVittie)
• Fix test failures on platforms where deleting the current working
directory is not allowed, such as Solaris
(dbus!480, Alan Coopersmith)
Internal changes:
• CI fixes (dbus!474, Simon McVittie)
dbus 1.15.10 (2024-09-25)
=========================
Build-time configuration changes:
• The Autotools build system has been removed. Its replacement is Meson.
(dbus#443, Ralf Habacker)
Enhancements:
• Use 64-bit timestamps internally.
This will allow 32-bit builds of libdbus to continue working after 2038
if there is OS-level support for 64-bit time_t, either opt-in
(as on 32-bit glibc systems) or by default. (dbus!444, Alexander Kanavin)
• When building with CMake, build more HTML documentation
(dbus#504, Ralf Habacker)
Bug fixes:
• Don't crash if configured to watch more than 128 directories with
inotify (dbus#481, hongjinghao)
• Never add (uid_t) -1, (gid_t) -1 or (pid_t) 0 to credentials
(dbus!464, Alyssa Ross)
• Fix a regression since 1.15.0 for "autolaunch:" on Windows
(dbus#503, Thomas Sondergaard)
• When building with Meson, don't use stdatomic.h if it exists but is
non-functional, for example under Visual Studio 2022
(dbus#494, Thomas Sondergaard)
• When building with Meson, add test dependencies so that 'meson test'
does not always need to be preceded by 'meson compile'
(dbus!465, Alyssa Ross)
• When building with Meson, really enable launchd if appropriate
(dbus!463, Alyssa Ross)
• In the test suite, use a more widely-implemented group name 'tty'
in preference to 'bin' (dbus#514, Alyssa Ross)
• Ensure that `dbus-test-tool spam` options cannot leave the payload
length uninitialized (dbus!469, Simon McVittie)
• Fix compiler warnings with gcc 14 (dbus!469, Simon McVittie)
Documentation:
• Clarify ownership transfer of pending call in
dbus_connection_send_with_reply() (dbus!455, Wiebe Cazemier)
• Explicitly document dbus-send exit status (dbus#452, Philip Withnall)
• Refer to d-spy in preference to unmaintaned D-Feet
(dbus!460, Ludovico de Nittis)
• Update URL to Bustle tool (dbus!460, Ludovico de Nittis)
Internal changes:
• Replace _dbus_string_append_int(), _dbus_string_append_uint() with
calls to _dbus_string_append_printf()
(dbus!445, Simon McVittie)
• Clean up unused macros in CMake build
(dbus!463, Alyssa Ross)
• Internal CI changes
(dbus#487, dbus#488, dbus#489, dbus#509;
Ralf Habacker, Simon McVittie)
dbus 1.15.8 (2023-08-21)
========================
Build-time configuration changes:
• For this version of dbus, Meson is the recommended build system for all
Unix platforms. CMake continues to be recommended for Windows, but this
recommendation might change to Meson in a future release, so please
test the Meson build. See INSTALL for details.
• Autotools-generated files are no longer included in the tarball release.
The Autotools build system is likely to be removed in a future dbus
release, so Autotools users should migrate to Meson as soon as possible.
It is still possible to build using Autotools, by following the same
procedure as for a git clone (starting with the `./autogen.sh` script).
Enhancements:
• D-Bus Specification 0.42:
· GetConnectionCredentials can return ProcessFD
(dbus!420, dbus!398; Luca Boccassi)
• On Linux with sufficiently new glibc and kernel headers, report a pinned
process file descriptor (pidfd) as the ProcessFD member of the
GetConnectionCredentials() result
(dbus!420, dbus!398; Luca Boccassi)
• On Linux with systemd, start as the target user/group (retaining
CAP_AUDIT_WRITE to preserve the ability to write to the audit log),
instead of starting as root and dropping privileges
(dbus!399, Luca Boccassi)
• On 32-bit glibc systems, opt-in to 64-bit timestamps if possible.
This will allow 32-bit builds of libdbus to continue working after 2038.
(dbus#465, Simon McVittie)
• On 32-bit glibc systems when built with CMake, also opt-in to large
file sizes, offsets and inode numbers, as was done for Autotools
since 1.12.x and Meson since the Meson build was introduced
(dbus#465, fd.o #93545; Simon McVittie)
• Avoid known dbus-daemon options being interpreted as optional arguments
(dbus#467, Xin Shi)
• If libdbus is a Meson subproject in a larger project, announce it as an
implementation of the dbus-1 dependency (dbus!415, Barnabás Pőcze)
• When built with CMake, get the version number from Meson instead of
Autotools, in preparation for the Autotools build system being removed
(dbus!382, Ralf Habacker)
• When built with Meson, disable some unwanted warnings when either
assertions or checks is disabled (dbus!412, Simon McVittie)
• Use C11 <stdatomic.h> if possible (dbus!431, Simon McVittie)
• Expand coverage of SPDX/REUSE copyright/license information
(dbus!427, Simon McVittie)
• On Linux, let dbus-daemon start up successfully (with a warning) if
inotify initialization fails, even if DBUS_FATAL_WARNINGS=1 is present
in the environment (dbus#473, Simon McVittie)
• On Unix, provide a better error message when looking up a user by name
or user ID fails (dbus!442, Simon McVittie)
Bug fixes:
• Avoid a dbus-daemon crash if re-creating a connection's policy fails.
If it isn't possible to re-create its policy (for example if it belongs
to a user account that has been deleted or if the Name Service Switch is
broken, on a system not supporting SO_PEERGROUPS), we now log a warning,
continue to use its current policy, and continue to reload other
connections' policies. (dbus#343; Peter Benie, Simon McVittie)
• If getting the groups from a user ID fails, report the error correctly,
instead of logging "(null)" (dbus#343, Simon McVittie)
• Return the primary group ID in GetConnectionCredentials()' UnixGroupIDs
field for processes with a valid-but-empty supplementary group list
(dbus!422, cptpcrd)
• `sudo meson install` without a DESTDIR is now possible, although
strongly discouraged on production systems (dbus#436, Simon McVittie)
• Fix a Meson deprecation warning (dbus#439, Simon McVittie)
Tests and CI enhancements:
• Internal CI changes
(dbus#455, dbus!414, dbus#468, dbus#469, dbus!424, dbus!430, dbus#436,
dbus#470; Ralf Habacker, Simon McVittie)
dbus 1.15.6 (2023-06-06)
========================
Denial-of-service fixes:
• Fix an assertion failure in dbus-daemon when a privileged Monitoring
connection (dbus-monitor, busctl monitor, gdbus monitor or similar)
is active, and a message from the bus driver cannot be delivered to a
client connection due to <deny> rules or outgoing message quota. This
is a denial of service if triggered maliciously by a local attacker.
(dbus#457; hongjinghao, Simon McVittie)
Enhancements:
• Special-case reading pseudo-files from Linux /proc to take into
account the filesystem's unusual semantics (dbus!401, Luca Boccassi)
Other fixes:
• Fix compilation on compilers not supporting __FUNCTION__
(dbus!404, Barnabás Pőcze)
• Fix some memory leaks on out-of-memory conditions
(dbus!403, Barnabás Pőcze)
• Documentation:
· Update the README to recommend building with Meson
(dbus!402, Ahmed Abdelfattah)
· Fix syntax of a code sample in dbus-api-design
(dbus!396; Yen-Chin, Lee)
• CMake build fixes:
· Detect presence of <sys/syscall.h> (dbus!400, Luca Boccassi)
Tests and CI enhancements:
• Fix CI pipelines after freedesktop/freedesktop#540
(dbus!405, dbus#456; Simon McVittie)
• Ensure the messagebus user is created if necessary
(dbus#445, Ralf Habacker)
dbus 1.15.4 (2023-02-08)
========================
Dependencies:
• Building with CMake now requires CMake ≥ 3.9.
Build-time configuration changes:
• On Unix platforms, a path in the runtime state directory (often /run)
is now used for the well-known system bus socket by default. OS
distributors should check that the path used is equivalent to the
interoperable path /var/run/dbus/system_bus_socket, especially if
running on an OS where /var/run is not guaranteed to be a symbolic
link to /run.
(dbus#180; Issam E. Maghni, Simon McVittie)
· With Autotools, this is controlled by --runstatedir, which defaults
to ${localstatedir}/run but is often set to /run by OS distributors.
The path to the system bus socket can be overridden with the
--with-system-socket option if required.
· With CMake, this is controlled by the RUNSTATEDIR option, which has
behaviour similar to Autotools. There is no separate option for the
path to the system bus socket.
· With Meson, this is controlled by the runtime_dir option, which
defaults to /run if the installation prefix is set to /usr, or has
behaviour similar to Autotools otherwise. The path to the system bus
socket can be overridden with the system_socket option if required.
Denial of service fixes:
• Fix an incorrect assertion that could be used to crash dbus-daemon or
other users of DBusServer prior to authentication, if libdbus was compiled
with assertions enabled.
We recommend that production builds of dbus, for example in OS distributions,
should be compiled with checks but without assertions.
(dbus#421, Ralf Habacker; thanks to Evgeny Vereshchagin)
Enhancements:
• D-Bus Specification 0.41:
· Clarify handling of /run vs. /var/run on Unix systems
(dbus#180, Simon McVittie)
• Add dbus_connection_set_builtin_filters_enabled(), intended to be called
by tools that use BecomeMonitor() such as dbus-monitor
(dbus#301, Kai A. Hiller)
• When using the Meson build system, dbus can now be used as a subproject.
To avoid colliding with a separate system copy of dbus, building it as a
static library with tests, tools and the message bus disabled is
strongly recommended. See test/use-as-subproject for sample code.
(dbus!368, dbus!388; Daniel Wagner)
Other fixes:
• When connected to a dbus-broker, stop dbus-monitor from incorrectly
replying to Peer method calls that were sent to the dbus-broker with
a NULL destination (dbus#301, Kai A. Hiller)
• Fix out-of-bounds varargs read in the dbus-daemon's config-parser.
This is not attacker-triggerable and appears to be harmless in practice,
but is technically undefined behaviour and is detected as such by
AddressSanitizer. (dbus!357, Evgeny Vereshchagin)
• Avoid a data race in multi-threaded use of DBusCounter
(dbus#426, Ralf Habacker)
• Fix a crash with some glibc versions when non-auditable SELinux events
are logged (dbus!386, Jeremi Piotrowski)
• If dbus_message_demarshal() runs out of memory while validating a message,
report it as NoMemory rather than InvalidArgs (dbus#420, Simon McVittie)
• Use C11 _Alignof if available, for better standards-compliance
(dbus!389, Khem Raj)
• Stop including an outdated copy of pkg.m4 in the git tree
(dbus!365, Simon McVittie)
• Meson build fixes:
· Use -fvisibility=hidden on Unix if supported, in particular on Linux
(dbus!383, dbus#437; Simon McVittie)
· Fix build on macOS, and any other platform that has
CLOCK_MONOTONIC but not pthread_condattr_setclock()
(dbus#419, Jordan Williams)
• Documentation:
· Consistently use Gitlab bug reporting URL (dbus!372, Marco Trevisan)
• Licensing:
· Use MIT license for some test files that did not previous specify a
license, with permission from their authors (dbus!359, Simon McVittie)
· Add more SPDX/REUSE license markers
(dbus!311, dbus!369, dbus!370, dbus!371, dbus!375, dbus!376;
Ralf Habacker, Simon McVittie)
· Correct syntax of some SPDX license markers (dbus!360, Ralf Habacker)
• Tests fixes:
· Fix an assertion failure in test-autolaunch-win
(dbus#422, Ralf Habacker)
· Expand test coverage under CMake (dbus!322, Ralf Habacker)
· Fix the test-apparmor-activation test after dbus#416
(dbus!380, Dave Jones)
Internal changes:
• Add static assertions for some things we assume about pointers
(dbus!345, Simon McVittie)
• Refactoring (dbus!356, dbus#430, dbus#431; Simon McVittie, Xin Shi)
• Fix CI builds with recent git versions (dbus#447, Simon McVittie)
• Build dbus with clang during CI (dbus!358, Evgeny Vereshchagin)
dbus 1.15.2 (2022-10-05)
========================
This development release incorporates the same denial-of-service fixes and
security hardening as dbus 1.14.4.
Behaviour changes:
• On Linux, dbus-daemon and other uses of DBusServer now create a
path-based Unix socket, unix:path=..., when asked to listen on a
unix:tmpdir=... address. This makes unix:tmpdir=... equivalent to
unix:dir=... on all platforms.
Previous versions would have created an abstract socket, unix:abstract=...,
in this situation.
This change primarily affects the well-known session bus when run via
dbus-launch(1) or dbus-run-session(1). The user bus, enabled by configuring
dbus with --enable-user-session and running it on a systemd system,
already used path-based Unix sockets and is unaffected by this change.
This behaviour change prevents a sandbox escape via the session bus socket
in sandboxing frameworks that can share the network namespace with the host
system, such as Flatpak.
This change might cause a regression in situations where the abstract socket
is intentionally shared between the host system and a chroot or container,
such as some use-cases of schroot(1). That regression can be resolved by
using a bind-mount to share either the D-Bus socket, or the whole /tmp
directory, with the chroot or container.
(dbus#416, Simon McVittie)
Denial of service fixes:
Evgeny Vereshchagin discovered several ways in which an authenticated
local attacker could cause a crash (denial of service) in
dbus-daemon --system or a custom DBusServer. In uncommon configurations
these could potentially be carried out by an authenticated remote attacker.
• An invalid array of fixed-length elements where the length of the array
is not a multiple of the length of the element would cause an assertion
failure in debug builds or an out-of-bounds read in production builds.
This was a regression in version 1.3.0.
(dbus#413, CVE-2022-42011; Simon McVittie)
• A syntactically invalid type signature with incorrectly nested parentheses
and curly brackets would cause an assertion failure in debug builds.
Similar messages could potentially result in a crash or incorrect message
processing in a production build, although we are not aware of a practical
example. (dbus#418, CVE-2022-42010; Simon McVittie)
• A message in non-native endianness with out-of-band Unix file descriptors
would cause a use-after-free and possible memory corruption in production
builds, or an assertion failure in debug builds. This was a regression in
version 1.3.0. (dbus#417, CVE-2022-42012; Simon McVittie)
Enhancements:
• D-Bus Specification 0.40 (dbus#416, Simon McVittie)
· Clarify that unix:tmpdir is not required to use abstract sockets,
even where supported
· Mention implications of abstract sockets for Linux namespacing
dbus 1.15.0 (2022-09-22)
========================
Dependencies:
• On platforms where a pointer is larger than 64 bits, dbus requires at
least a C11 compiler.
On other platforms, dbus now requires either a C99 compiler such as
gcc or clang, or Microsoft Visual Studio 2015 or later. Some workarounds
for pre-C99 environments are currently still present, but we plan to
remove them during this development cycle.
• Building with CMake now requires CMake ≥ 3.4.
• Building with Meson requires Meson ≥ 0.56 and Python ≥ 3.5.
Feature removal:
• Remove support for the obsolete pam_console and pam_foreground modules
(the Autotools --with-console-auth-dir= and CMake -DDBUS_CONSOLE_AUTH_DIR=
options, which have been deprecated since dbus 1.11.18).
(dbus#181, fd.o#101629)
Build-time configuration changes:
• Add a Meson build system. This is currently considered experimental,
but the intention is for it to replace Autotools and/or CMake in future
releases, preferably both. Please test!
(dbus!303, dbus!325; Félix Piédallu, Marc-André Lureau, Simon McVittie)
· This requires Meson 0.56 or newer, and Python 3.5 or newer.
· Expat can be built as a subproject using Meson's "wrap" mechanism,
if desired. This should make it considerably easier to build dbus
for Windows or other platforms without a library packaging system.
· GLib can also be built as a subproject using Meson's "wrap" mechanism,
if desired. This should make it considerably easier to build full
test coverage on Windows or other platforms without a library
packaging system.
• Please note that not all Meson build options correspond 1:1 to how
the closest equivalents in Autotools or CMake behave, and the Meson
build options are subject to change.
Distributors and developers evaluating the Meson build should check
that they are configuring dbus the way they intend to.
Enhancements:
• D-Bus Specification 0.39:
· Document how to represent internationalized domain names in D-Bus
names (dbus!324, Simon McVittie)
· Improve documentation of AF_UNIX sockets (Marc-André Lureau)
• On Unix, speed up closing file descriptors for subprocesses by using
closefrom() or close_range() where available
(dbus#278; rim, Simon McVittie)
• On Windows, dbus can now use AF_UNIX sockets, not just TCP.
This requires Windows 10 build 17063 or later at runtime,
and either Windows 10 SDK 17063 or mingw-w64 version 9.0.0 or later
at compile-time. (dbus!249, Marc-André Lureau)
• Teach dbus-send to handle variants in containers: arrays of variants,
variant values in dictionaries, and nested variants
(dbus!206, Frederik Van Bogaert)
• Detect programming errors with Windows mutexes if assertions are
enabled, similar to what we already did for pthreads mutexes
(dbus#369, Ralf Habacker)
• Move license text into LICENSES, and start to use SPDX markers
(Simon McVittie, Ralf Habacker)
Fixes:
• Portability to CPU architectures with larger-than-64-bit pointers
(dbus!335, dbus!318; Alex Richardson)
• Fix build failure on FreeBSD (dbus!277, Alex Richardson)
• Fix build failure on macOS with launchd enabled
(dbus!287, Dawid Wróbel)
• Preserve errno on failure to open /proc/self/oom_score_adj
(dbus!285, Gentoo#834725; Mike Gilbert)
• Improve dbus-launch --autolaunch so it can pick up an existing bus from
Linux XDG_RUNTIME_DIR or macOS launchd, even if X11 autolaunching was
disabled (dbus#385, dbus#392; Simon McVittie, Alex Richardson)
• Correctly escape AF_UNIX socket paths when converting them to D-Bus
address strings (dbus#405, Marc-André Lureau)
• On Linux, don't log warnings if oom_score_adj is read-only but does not
need to be changed (dbus!291, Simon McVittie)
• Slightly improve error-handling for inotify
(dbus!235, Simon McVittie)
• Don't crash if dbus-daemon is asked to watch more than 128 directories
for changes (dbus!302, Jan Tojnar)
• Silence various compiler warnings
(dbus!275, dbus!289, dbus!305, dbus!307, dbus!312, dbus!315;
Ralf Habacker, Simon McVittie, Alex Richardson, Marc-André Lureau)
• On Windows, use safer locking patterns for the system-global mutex used
to implement autolaunching (dbus#368, dbus#370; Ralf Habacker)
• Index dbus-arch-deps.h for API documentation when building out-of-tree
(dbus!312, Marc-André Lureau)
• Silence xmlto warnings when building man pages
(dbus!312, Marc-André Lureau)
• Fix build failure when checks are disabled but assertions are enabled
(dbus#412, Johannes Kauffmann)
• Use C99 flexible arrays in the memory pool implementation for better
support for modern compilers
(dbus!343, dbus!344; Alex Richardson, Simon McVittie)
• Autotools build system fixes:
· Don't treat --with-x or --with-x=yes as a request to disable X11,
fixing a regression in 1.13.20. Instead, require X11 libraries and
fail if they cannot be detected. (dbus!263, Lars Wendler)
· When a CMake project uses an Autotools-built libdbus in a
non-standard prefix, find dbus-arch-deps.h successfully
(dbus#314, Simon McVittie)
· Don't include generated XML catalog in source releases
(dbus!317, Jan Tojnar)
· Improve robustness of detecting gcc __sync atomic builtins
(dbus!320, Alex Richardson)
• CMake build system fixes:
· Detect endianness correctly, fixing interoperability with other D-Bus
implementations on big-endian systems (dbus#375, Ralf Habacker)
· Fix a race condition generating man pages and HTML documentation
(dbus#381, Ralf Habacker)
· When building for Unix, install session and system bus setup
in the intended locations
(dbus!267, dbus!297; Ralf Habacker, Alex Richardson)
· Detect setresuid() and getresuid() (dbus!319, Alex Richardson)
· Detect backtrace() on FreeBSD (dbus!281, Alex Richardson)
· Don't include headers from parent directory (dbus!282, Alex Richardson)
· Fix -Wunused-command-line-argument on FreeBSD
(dbus!278, Alex Richardson)
· Only add warning flags if the compiler supports them
(dbus!276, Alex Richardson)
· Distinguish between host and target TMPDIR when cross-compiling
(dbus!279, Alex Richardson)
· Improve compiler warning detection (dbus#387, Ralf Habacker)
· Allow TEST_SOCKET_DIR to be overridden (dbus!295, Ralf Habacker)
· Fix detection of atomic operations (dbus!306, Alex Richardson)
· Use DWARF 2 instead of STABS for debug symbols on Windows, for
compatibility with newer gcc versions (dbus!323, Marc-André Lureau)
· Fix use of paths relative to the dbus project directory when dbus is
vendored into a larger CMake project (dbus!332, Jordan Williams)
Tests and CI enhancements:
• Add an automated test for Windows autolaunching
(dbus#235, Ralf Habacker)
• Avoid compiler warnings in test code
(dbus#383, dbus!274, dbus!275; Simon McVittie, Ralf Habacker)
• Avoid LeakSanitizer warnings in test code
(dbus!326, Simon McVittie)
• Speed up a particularly slow unit test by a factor of 30
(dbus!328, Simon McVittie)
• On Unix, skip tests that switch uid if run in a container that is
unable to do so, instead of failing (dbus#407, Simon McVittie)
• On Unix, consistently create test sockets in DBUS_TEST_SOCKET_DIR and
not the build directory, allowing the build directory to be mounted with
a non-POSIX filesystem (dbus!334, Alex Richardson)
• Gitlab-CI improvements
(dbus#383, dbus#388, dbus!262, dbus!288, dbus!292, dbus!296, dbus!299,
dbus!301;
Ralf Habacker, Simon McVittie, Alex Richardson)
• Added FreeBSD Gitlab-CI build jobs
(dbus!280, dbus!347; Alex Richardson)
• Use the latest MSYS2 packages for CI
(Ralf Habacker, Simon McVittie)
dbus: remove reference to MESSAGE.rcd to fix build
sysutils/dbus: update to 1.14.10 dbus 1.14.10 (2023-09-01) ========================= Bug fixes: • Avoid a dbus-daemon crash if re-creating a connection's policy fails. If it isn't possible to re-create its policy (for example if it belongs to a user account that has been deleted or if the Name Service Switch is broken, on a system not supporting SO_PEERGROUPS), we now log a warning, continue to use its current policy, and continue to reload other connections' policies. (dbus#343; Peter Benie, Simon McVittie) • If getting the groups from a user ID fails, report the error correctly, instead of logging "(null)" (dbus#343, Simon McVittie) • Return the primary group ID in GetConnectionCredentials()' UnixGroupIDs field for processes with a valid-but-empty supplementary group list (dbus!422, cptpcrd)
dbus: update to 1.14.8.
dbus 1.14.8 (2023-06-06)
========================
Denial-of-service fixes:
• Fix an assertion failure in dbus-daemon when a privileged Monitoring
connection (dbus-monitor, busctl monitor, gdbus monitor or similar)
is active, and a message from the bus driver cannot be delivered to a
client connection due to <deny> rules or outgoing message quota. This
is a denial of service if triggered maliciously by a local attacker.
(dbus#457; hongjinghao, Simon McVittie)
Other fixes:
• Fix compilation on compilers not supporting __FUNCTION__
(dbus!404, Barnabás Pőcze)
• Fix some memory leaks on out-of-memory conditions
(dbus!403, Barnabás Pőcze)
• Documentation:
· Fix syntax of a code sample in dbus-api-design
(dbus!396; Yen-Chin, Lee)
Tests and CI enhancements:
• Fix CI pipelines after freedesktop/freedesktop#540
(dbus!405, dbus#456; Simon McVittie)
Mass-change BUILD_DEPENDS to TOOL_DEPENDS outside mk/. Almost all uses, if not all of them, are wrong, according to the semantics of BUILD_DEPENDS (packages built for target available for use _by_ tools at build-time) and TOOL_DEPEPNDS (packages built for host available for use _as_ tools at build-time). No change to BUILD_DEPENDS as used correctly inside buildlink3. As proposed on tech-pkg: https://mail-index.netbsd.org/tech-pkg/2023/06/03/msg027632.html
dbus: update to 1.14.6.
dbus 1.14.6 (2023-02-08)
========================
Denial of service fixes:
• Fix an incorrect assertion that could be used to crash dbus-daemon or
other users of DBusServer prior to authentication, if libdbus was compiled
with assertions enabled.
We recommend that production builds of dbus, for example in OS distributions,
should be compiled with checks but without assertions.
(dbus#421, Ralf Habacker; thanks to Evgeny Vereshchagin)
Other fixes:
• When connected to a dbus-broker, stop dbus-monitor from incorrectly
replying to Peer method calls that were sent to the dbus-broker with
a NULL destination (dbus#301, Kai A. Hiller)
• Fix out-of-bounds varargs read in the dbus-daemon's config-parser.
This is not attacker-triggerable and appears to be harmless in practice,
but is technically undefined behaviour and is detected as such by
AddressSanitizer. (dbus!357, Evgeny Vereshchagin)
• Avoid a data race in multi-threaded use of DBusCounter
(dbus#426, Ralf Habacker)
• Fix a crash with some glibc versions when non-auditable SELinux events
are logged (dbus!386, Jeremi Piotrowski)
• If dbus_message_demarshal() runs out of memory while validating a message,
report it as NoMemory rather than InvalidArgs (dbus#420, Simon McVittie)
• Use C11 _Alignof if available, for better standards-compliance
(dbus!389, Khem Raj)
• Stop including an outdated copy of pkg.m4 in the git tree
(dbus!365, Simon McVittie)
• Documentation:
· Consistently use Gitlab bug reporting URL (dbus!372, Marco Trevisan)
• Tests fixes:
· Fix the test-apparmor-activation test after dbus#416
(dbus!380, Dave Jones)
Internal changes:
• Fix CI builds with recent git versions (dbus#447, Simon McVittie)
dbus: update to 1.14.4. dbus 1.14.4 (2022-10-05) ======================== This is a security update for the dbus 1.14.x stable branch, fixing denial-of-service issues (CVE-2022-42010, -42011, -42012) and applying security hardening (dbus#416). Behaviour changes: • On Linux, dbus-daemon and other uses of DBusServer now create a path-based Unix socket, unix:path=..., when asked to listen on a unix:tmpdir=... address. This makes unix:tmpdir=... equivalent to unix:dir=... on all platforms. Previous versions would have created an abstract socket, unix:abstract=..., in this situation. This change primarily affects the well-known session bus when run via dbus-launch(1) or dbus-run-session(1). The user bus, enabled by configuring dbus with --enable-user-session and running it on a systemd system, already used path-based Unix sockets and is unaffected by this change. This behaviour change prevents a sandbox escape via the session bus socket in sandboxing frameworks that can share the network namespace with the host system, such as Flatpak. This change might cause a regression in situations where the abstract socket is intentionally shared between the host system and a chroot or container, such as some use-cases of schroot(1). That regression can be resolved by using a bind-mount to share either the D-Bus socket, or the whole /tmp directory, with the chroot or container. (dbus#416, Simon McVittie) Denial of service fixes: Evgeny Vereshchagin discovered several ways in which an authenticated local attacker could cause a crash (denial of service) in dbus-daemon --system or a custom DBusServer. In uncommon configurations these could potentially be carried out by an authenticated remote attacker. • An invalid array of fixed-length elements where the length of the array is not a multiple of the length of the element would cause an assertion failure in debug builds or an out-of-bounds read in production builds. This was a regression in version 1.3.0. (dbus#413, CVE-2022-42011; Simon McVittie) • A syntactically invalid type signature with incorrectly nested parentheses and curly brackets would cause an assertion failure in debug builds. Similar messages could potentially result in a crash or incorrect message processing in a production build, although we are not aware of a practical example. (dbus#418, CVE-2022-42010; Simon McVittie) • A message in non-native endianness with out-of-band Unix file descriptors would cause a use-after-free and possible memory corruption in production builds, or an assertion failure in debug builds. This was a regression in version 1.3.0. (dbus#417, CVE-2022-42012; Simon McVittie)
dbus: update to 1.14.2.
dbus 1.14.2 (2022-09-26)
========================
Fixes:
• Fix build failure on FreeBSD (dbus!277, Alex Richardson)
• Fix build failure on macOS with launchd enabled
(dbus!287, Dawid Wróbel)
• Preserve errno on failure to open /proc/self/oom_score_adj
(dbus!285, Gentoo#834725; Mike Gilbert)
• On Linux, don't log warnings if oom_score_adj is read-only but does not
need to be changed (dbus!291, Simon McVittie)
• Slightly improve error-handling for inotify
(dbus!235, Simon McVittie)
• Don't crash if dbus-daemon is asked to watch more than 128 directories
for changes (dbus!302, Jan Tojnar)
• Autotools build system fixes:
· Don't treat --with-x or --with-x=yes as a request to disable X11,
fixing a regression in 1.13.20. Instead, require X11 libraries and
fail if they cannot be detected. (dbus!263, Lars Wendler)
· When a CMake project uses an Autotools-built libdbus in a
non-standard prefix, find dbus-arch-deps.h successfully
(dbus#314, Simon McVittie)
· Don't include generated XML catalog in source releases
(dbus!317, Jan Tojnar)
· Improve robustness of detecting gcc __sync atomic builtins
(dbus!320, Alex Richardson)
• CMake build system fixes:
· Detect endianness correctly, fixing interoperability with other D-Bus
implementations on big-endian systems (dbus#375, Ralf Habacker)
· When building for Unix, install session and system bus setup
in the intended locations
(dbus!267, dbus!297; Ralf Habacker, Alex Richardson)
· Detect setresuid() and getresuid() (dbus!319, Alex Richardson)
· Detect backtrace() on FreeBSD (dbus!281, Alex Richardson)
· Don't include headers from parent directory (dbus!282, Alex Richardson)
· Distinguish between host and target TMPDIR when cross-compiling
(dbus!279, Alex Richardson)
· Fix detection of atomic operations (dbus!306, Alex Richardson)
Tests and CI enhancements:
• On Unix, skip tests that switch uid if run in a container that is
unable to do so, instead of failing (dbus#407, Simon McVittie)
• Use the latest MSYS2 packages for CI
(Ralf Habacker, Simon McVittie)
dbus: Add SunOS socket libs for socketpair(). Bump PKGREVISION as this was a configure test that was failing. The build would succeed, but the resulting binaries would just break at runtime with a "you do not have socketpair support" error. Thanks for that, dbus.
dbus: build fix for x11 option
dbus: candidate fix for PR 56763 To fix interaction between dbus and xfce4. Debugging by martin@ Bump PKGREVISION.
dbus: update to 1.14.0.
1.14.x is a new stable branch, superseding 1.12.x.
Summary of major changes between 1.12.x and 1.14.0
--------------------------------------------------
Dependencies:
• On Unix platforms, if getpwnam_r() and getgrnam_r() are implemented,
they must be POSIX-conformant. The non-POSIX signature seen in ancient
Solaris versions will no longer work.
...
Deprecations:
• Third-party software should install default dbus policies for the system
bus into ${datadir}/dbus-1/system.d (this has been supported since dbus
1.10, released in August 2015). Installing default dbus policies in
${sysconfdir}/dbus-1/system.d is now considered to be deprecated. Policy
files in ${sysconfdir}/dbus-1/system.d continue to be read, but this
directory should only be used by system administrators wishing to
override the default policies.
The ${datadir} applicable to dbus is usually /usr/share and the
${sysconfdir} is usually /etc.
• A similar pattern applies to the session bus policies in session.d.
• The dbus-send(1) man page now documents --bus and --peer instead of
the old --address synonym for --peer, which has been deprecated since
the introduction of --bus and --peer in 1.7.6
• The dbus-daemon man page now has scarier warnings about
<allow_anonymous/> and non-local TCP, which are insecure and should
not be used, particularly for the standard system and session buses
• DBusServer (and hence the dbus-daemon) no longer accepts usernames
(login names) for the recommended EXTERNAL authentication mechanism,
only numeric user IDs or the empty string. See 1.13.0 release notes
for full details.
New features:
• On Linux 4.13 or later when built against a suitable glibc version,
GetConnectionCredentials() now includes UnixGroupIDs, the effective
group IDs of the initiator of the connection, taken from
SO_PEERGROUPS.
• On Linux 4.13 or later, <policy group="…"> now uses the SO_PEERGROUPS
credentials-passing socket option to get the effective group IDs
of the initiator of the connection. See 1.13.4 release notes for details.
• Add a --sender option to dbus-send, which requests a name and holds it
until the signal has been sent
• dbus-daemon <allow> and <deny> rules can now specify a
send_destination_prefix attribute, which is like a combination of
send_destination and the arg0namespace keyword in match rules.
See 1.13.12 release notes for more details
• The dbus-daemon now filters the messages that it relays, removing
header fields that it does not understand. Clients must not rely on
this behaviour unless they have confirmed that they are connected to
a suitable message bus implementation, for example by querying its
Features property.
• The dbus-daemon now emits a signal, ActivatableServicesChanged, when
the list of activatable services may have changed. Support for this
signal can be discovered by querying the Features property.
• It is now possible to disable traditional (non-systemd) service
activation at build-time (Autotools: --disable-traditional-activation,
CMake: -DENABLE_TRADITIONAL_ACTIVATION=OFF). See 1.13.10 release notes
for details.
• The API reference manual can be built as a Qt compiled help file if
qhelpgenerator(-qt5) is available. See 1.13.16 release notes for details.
Miscellaneous behaviour changes:
• When using the "user bus" (--enable-user-session), put the dbus-daemon
in the session slice
• Several environment variables set by systemd are no longer passed
on to activated services
• If the dbus-daemon is compiled for Linux with systemd support, it
now informs systemd that it is ready for use via the sd_notify()
mechanism
Use the right variable to check for MKPIE
Fix dbus PIE build Only remove -fPIE and -pie when PKGSRC_MKPIE is no. The buildlink transforms make the tools become non-pie. This causes the PIE checks to fail.
dbus: let the RC script work unprivileged This takes advantage of the introduction of the SYSCONFBASE variable. Tested on NetBSD/amd64. Bumps PKGREVISION.
dbus: Create VARBASE/lib/dbus directory
dbus: switch from pkgsrc-only var/db/dbus to default var/lib/dbus This path is what other code, notably glib2, expects. While here, remove a compatibility patch for NetBSD 5/6. Bump PKGREVISION.
dbus: Simplify MESSAGE, make it only appear for INIT_SYSTEM=rc.d
dbus: update to 1.12.20. dbus 1.12.20 (2020-07-02) ========================= The “temporary nemesis” release. Maybe security fixes: • On Unix, avoid a use-after-free if two usernames have the same numeric uid. In older versions this could lead to a crash (denial of service) or other undefined behaviour, possibly including incorrect authorization decisions if <policy group=...> is used. Like Unix filesystems, D-Bus' model of identity cannot distinguish between users of different names with the same numeric uid, so this configuration is not advisable on systems where D-Bus will be used. Thanks to Daniel Onaca. (dbus#305, dbus!166; Simon McVittie) Other fixes: • On Solaris and its derivatives, if a cmsg header is truncated, ensure that we do not overrun the buffer used for fd-passing, even if the kernel tells us to. (dbus#304, dbus!165; Andy Fiddaman)
Pullup ticket #6233 - requested by wiz
sysutils/dbus: security fix
Revisions pulled up:
- sysutils/dbus/Makefile 1.121
- sysutils/dbus/distinfo 1.93
---
Module Name: pkgsrc
Committed By: wiz
Date: Tue Jun 9 07:13:31 UTC 2020
Modified Files:
pkgsrc/sysutils/dbus: Makefile distinfo
Log Message:
dbus: update to 1.12.18.
dbus 1.12.18 (2020-06-02)
=========================
The “telepathic vines” release.
Denial of service fixes:
• CVE-2020-12049: If a message contains more file descriptors than can
be sent, close those that did get through before reporting error.
Previously, a local attacker could cause the system dbus-daemon (or
another system service with its own DBusServer) to run out of file
descriptors, by repeatedly connecting to the server and sending fds that
would get leaked.
Thanks to Kevin Backhouse of GitHub Security Lab.
(dbus#294, GHSL-2020-057; Simon McVittie)
Other fixes:
• Fix a crash when the dbus-daemon is terminated while one or more
monitors are active (dbus#291, dbus!140; Simon McVittie)
• The dbus-send(1) man page now documents --bus and --peer instead of
the old --address synonym for --peer, which has been deprecated since
the introduction of --bus and --peer in 1.7.6
(fd.o #48816, dbus!115; Chris Morin)
• Fix a wrong environment variable name in dbus-daemon(1)
(dbus#275, dbus!122; Mubin, Philip Withnall)
• Fix formatting of dbus_message_append_args example
(dbus!126, Felipe Franciosi)
• Avoid a test failure on Linux when built in a container as uid 0, but
without the necessary privileges to increase resource limits
(dbus!58, Debian #908092; Simon McVittie)
• When building with CMake, cope with libX11 in a non-standard location
(dbus!129, Tuomo Rinne)
dbus: update to 1.12.18. dbus 1.12.18 (2020-06-02) ========================= The “telepathic vines” release. Denial of service fixes: • CVE-2020-12049: If a message contains more file descriptors than can be sent, close those that did get through before reporting error. Previously, a local attacker could cause the system dbus-daemon (or another system service with its own DBusServer) to run out of file descriptors, by repeatedly connecting to the server and sending fds that would get leaked. Thanks to Kevin Backhouse of GitHub Security Lab. (dbus#294, GHSL-2020-057; Simon McVittie) Other fixes: • Fix a crash when the dbus-daemon is terminated while one or more monitors are active (dbus#291, dbus!140; Simon McVittie) • The dbus-send(1) man page now documents --bus and --peer instead of the old --address synonym for --peer, which has been deprecated since the introduction of --bus and --peer in 1.7.6 (fd.o #48816, dbus!115; Chris Morin) • Fix a wrong environment variable name in dbus-daemon(1) (dbus#275, dbus!122; Mubin, Philip Withnall) • Fix formatting of dbus_message_append_args example (dbus!126, Felipe Franciosi) • Avoid a test failure on Linux when built in a container as uid 0, but without the necessary privileges to increase resource limits (dbus!58, Debian #908092; Simon McVittie) • When building with CMake, cope with libX11 in a non-standard location (dbus!129, Tuomo Rinne)
all: migrate several HOMEPAGEs to https pkglint --only "https instead of http" -r -F With manual adjustments afterwards since pkglint 19.4.4 fixed a few indentations in unrelated lines. This mainly affects projects hosted at SourceForce, as well as freedesktop.org, CTAN and GNU.
sysutils: align variable assignments pkglint -Wall -F --only aligned --only indent -r Manually excluded consolekit and dc-tools since pkglint didn't get the formatting correct.
dbus: update to 1.12.16. dbus 1.12.16 (2019-06-11) ========================= The “tree cat” release. Security fixes: • CVE-2019-12749: Do not attempt to carry out DBUS_COOKIE_SHA1 authentication for identities that differ from the user running the DBusServer. Previously, a local attacker could manipulate symbolic links in their own home directory to bypass authentication and connect to a DBusServer with elevated privileges. The standard system and session dbus-daemons in their default configuration were immune to this attack because they did not allow DBUS_COOKIE_SHA1, but third-party users of DBusServer such as Upstart could be vulnerable. Thanks to Joe Vennix of Apple Information Security. (dbus#269, Simon McVittie)
dbus: update to 1.12.14. dbus 1.12.14 (2019-05-17) ========================= The “reclaimed floorboards” release. Enhancements: • Raise soft fd limit to match hard limit, even if unprivileged. This makes session buses with many clients, or with clients that make heavy use of fd-passing, less likely to suffer from fd exhaustion. (dbus!103, Simon McVittie) Fixes: • If a privileged dbus-daemon has a hard fd limit greater than 64K, don't reduce it to 64K, ensuring that we can put back the original fd limits when carrying out traditional (non-systemd) activation. This fixes a regression with systemd >= 240 in which system services inherited dbus-daemon's hard and soft limit of 64K fds, instead of the intended soft limit of 1K and hard limit of 512K or 1M. (dbus!103, Debian#928877; Simon McVittie) • Fix build failures caused by an AX_CODE_COVERAGE API change in newer autoconf-archive versions (dbus#249, dbus!88; Simon McVittie) • Fix build failures with newer autoconf-archive versions that include AX_-prefixed shell variable names (dbus#249, dbus!86; Simon McVittie) • Parse section/group names in .service files according to the syntax from the Desktop Entry Specification, rejecting control characters and non-ASCII in section/group names (dbus#208, David King) • Fix various -Wlogical-op issues that cause build failure with newer gcc versions (dbus#225, dbus!109; David King) • Don't assume we can set permissions on a directory, for the benefit of MSYS and Cygwin builds (dbus#216, dbus!110; Simon McVittie) • Don't overwrite PKG_CONFIG_PATH and related environment variables when the pkg-config-based version of DBus1Config is used in a CMake project (dbus#267, dbus!96; Clemens Lang)
dbus: update to 1.12.12.
dbus 1.12.12 (2018-12-04)
=========================
The “draconic disciple” release.
dbus version control is now hosted on freedesktop.org's Gitlab
installation, and bug reports and feature requests have switched from
Bugzilla bugs (indicated by "fd.o #nnn") to Gitlab issues ("dbus#nnn")
and merge requests ("dbus!nnn").
Enhancements:
• Reference the freedesktop.org Code of Conduct (Simon McVittie)
Fixes:
• Stop the dbus-daemon leaking memory (an error message) if delivering
the message that triggered auto-activation is forbidden. This is
technically a denial of service because the dbus-daemon will
run out of memory eventually, but it's a very slow and noisy one,
because all the rejected messages are also very likely to have
been logged to the system log, and its scope is typically limited by
the finite number of activatable services available.
(dbus#234, Simon McVittie)
• Remove __attribute__((__malloc__)) attribute on dbus_realloc(),
which does not meet the criteria for that attribute in gcc 4.7+,
potentially leading to miscompilation (fd.o #107741, Simon McVittie)
• Fix some small O(1) memory leaks (fd.o #107320, Simon McVittie)
• Fix printf formats for pointer-sized integers on 64-bit Windows
(fd.o #105662, Ralf Habacker)
• Always use select()-based poll() emulation on Darwin-based OSs
(macOS, etc.) and on Interix, similar to what libcurl does
(dbus#232, dbus!19; Simon McVittie)
• Extend a test timeout to avoid spurious failures in CI
(dbus!26, Simon McVittie)
Tests and CI:
• Add Travis-CI builds for 64-bit Windows using mingw-w64
(fd.o #105662, Ralf Habacker)
• Add Gitlab-CI integration (fd.o #108177, Simon McVittie)
dbus: update to 1.12.10. Fix pkglint warnings while here. dbus 1.12.10 (2018-08-02) ========================= The “beam deflection” release. Fixes: • Prevent reading up to 3 bytes beyond the end of a truncated message. This could in principle be an information leak or denial of service on the system bus, but is not believed to be exploitable to crash the system bus or leak interesting information in practice. (fd.o #107332, Simon McVittie) • Fix build with gcc 8 -Werror=cast-function-type (fd.o #107349, Simon McVittie) • Fix warning from gcc 8 about suspicious use of strncpy() when populating struct sockaddr_un (fd.o #107350, Simon McVittie) • Fix a minor memory leak when a DBusServer listens on a new address (fd.o #107194, Simon McVittie) • Fix an invalid NULL argument to rmdir() if a nonce-tcp DBusServer runs out of memory (fd.o #107194, Simon McVittie) • Don't use misleading errno-derived error names if getaddrinfo() or getnameinfo() fails with a code other than EAI_SYSTEM (fd.o #106395, Simon McVittie) • Skip tests that require working TCP if we are in a container environment where 127.0.0.1 cannot be resolved (fd.o #106812, Simon McVittie)
dbus: update to 1.12.8. dbus 1.12.8 (2018-04-30) ======================== The “golden super-velociraptor” release. Enhancements: • The Devhelp documentation index is now in version 2 format (fd.o #106186, Simon McVittie) • Give the dbus-daemon man page some scarier warnings about <allow_anonymous/> and non-local TCP, which are insecure and should not be used, particularly for the standard system and session buses (fd.o #106004, Simon McVittie) Fixes: • Fix installation of Ducktype documentation with newer yelp-build versions (fd.o #106171, Simon McVittie)
dbus: update to 1.12.6. dbus 1.12.6 (2018-03-01) ======================== The “just the one swan, actually” release. Fixes: • Increase system dbus-daemon's RLIMIT_NOFILE rlimit before it drops privileges, because it won't have permission afterwards. This fixes a regression in dbus 1.10.18 and 1.11.0 which made the standard system bus more susceptible to deliberate or accidental denial of service. (fd.o #105165, David King)
dbus: update to 1.12.4.
dbus 1.12.4 (2018-02-08)
========================
The “Stria Campania 115” release.
Fixes:
• When iterating the DBusConnection while blocking on a pending call,
don't wait for I/O if that pending call already has a result; and make
sure that whether it has a result is propagated in a thread-safe way.
This prevents certain multi-threaded calling patterns from blocking
until their timeout even when they should have succeeded sooner.
(fd.o #102839; Manish Narang, Michael Searle)
• Report the correct error if OOM is reached while trying to listen
on a TCP socket (fd.o #89104, Simon McVittie)
• Fix assertion failures in recovery from OOM while setting up a
DBusServer (fd.o #89104, Simon McVittie)
• Add a missing space to a warning message (fd.o #103729, Thomas Zajic)
• Expand ${bindir} correctly when pkg-config is asked for dbus_daemondir
(fd.o #104265, Benedikt Heine)
• On Linux systems with systemd < 237, if ${localstatedir}/dbus doesn't
exist, create it before trying to create ${localstatedir}/dbus/machine-id
(fd.o #104577, Chris Lesiak)
• Fix escaping in dbus-api-design document (fd.o #104925, Philip Withnall)
dbus: update to 1.12.2.
dbus 1.12.2 (2017-11-13)
========================
The “spider pumpkin” release.
Enhancements:
• Log a warning if a new connection cannot be accepted due to an
out-of-memory condition or failure to identify its AppArmor or
SELinux context (fd.o #103592, Simon McVittie)
Fixes:
• Make use of $(MKDIR_P) compatible with install-sh, fixing build when a
GNU-compatible `mkdir -p` is not available (fd.o #103521, ilovezfs)
• When building for Windows with Autotools, avoid `echo -e`, fixing
cross-compilation on non-GNU platforms like macOS
(fd.o #103493, Tony Theodore)
• Fix crashes in the server side of the nonce-tcp: transport under
various error conditions. This transport should normally only be used
on Windows, where AF_UNIX sockets are unavailable; the unix: transport
is the only one recommended for production use on Unix platforms.
(fd.o #103597, Simon McVittie)
Internal changes:
• Improve test coverage on Travis-CI (Simon McVittie)
dbus 1.12.0 (2017-10-30)
========================
The “gingerbread skull” release.
1.12.x is a new stable branch, recommended for use in OS
distributions.
Summary of major changes between 1.10.x and 1.12.0
--------------------------------------------------
Dependencies:
• Expat >= 2.1.0 is required.
• GLib >= 2.40 is required if full test coverage is enabled.
• [Linux] libselinux >= 2.0.86 is required if SELinux support is
enabled.
• [Unix] dbus now requires an <inttypes.h> that defines C99 constants
such as PRId64 and PRIu64, except when building for Windows.
• [Autotools] Building from git (but not from tarballs) with Autotools
now requires macros from the GNU Autoconf Archive.
• [CMake] Builds done using CMake now require CMake 3.0.2.
Build-time configuration changes:
• Expat is now found using pkg-config. See the release notes for
1.11.14.
• The --disable-compiler-optimisations and --enable-compiler-coverage
options no longer exist. See the release notes for 1.11.4 and 1.11.8.
• [Unix] The --enable-abstract-sockets and --disable-abstract-sockets
options no longer exist. See the release notes for 1.11.20.
• [Unix] Flag files in /var/run/console/${username} are no longer
checked for at_console by default. See the release notes for 1.11.18.
• [Unix, Cygwin] Init scripts are no longer provided by upstream dbus,
and packagers will now need to add these downstream (most already do).
See the release notes for 1.11.18.
• [Unix] The process ID file no longer has a different default location
on Red Hat derivatives. See the release notes for 1.11.18.
• [Unix] ${runstatedir} is now independent of ${localstatedir} with
recent Autotools versions. See the release notes for 1.11.16.
• [Windows] The WINDRES variable is no longer used. See the release
notes for 1.11.22.
Deprecations:
• Eavesdropping is officially deprecated in favour of BecomeMonitor.
See the release notes for spec version 0.31 (in dbus 1.11.14).
• [Unix] Flag files in /var/run/console/${username} are deprecated.
See the release notes for 1.11.18.
New APIs:
• <allow> and <deny> rules in dbus-daemon configuration can now
include send_broadcast="true", send_broadcast="false",
max_unix_fds="N", min_unix_fds="N" (for some integer N).
See the release notes for 1.11.18.
• dbus_try_get_local_machine_id() is like
dbus_get_local_machine_id(), but returns a DBusError.
• New APIs around DBusMessageIter to simplify cleanup.
See the release notes for 1.11.16.
• The message bus daemon now implements the standard Introspectable,
Peer and Properties interfaces. See the release notes for
dbus 1.11.14 and spec version 0.31.
• DTDs for introspection XML and bus configuration are installed.
• dbus can be compiled to be relocatable, making it more suitable for
binary bundling with other software. On Windows, this is on by
default.
• [Unix] A new unix:dir=… address family resembles unix:tmpdir=… but
never uses Linux abstract sockets, which is advantageous for
containers. On non-Linux it is equivalent to unix:tmpdir=….
See the release notes for dbus 1.11.14 and spec version 0.31.
• [Unix] New option "dbus-launch --exit-with-x11".
• [Unix] Session managers can create transient .service files in
$XDG_RUNTIME_DIR/dbus-1/services. See the release notes for 1.11.12.
• [Unix] A sysusers.d snippet can create the messagebus user on-demand.
Miscellaneous behaviour changes:
• [Unix] The session bus now logs to syslog if it was started by
dbus-launch.
• [Unix] Internal warnings are logged to syslog if configured.
• [Unix] Exceeding an anti-DoS limit is logged to syslog if configured,
or to stderr.
dbus: update to 1.10.24. D-Bus 1.10.24 (2017-09-25) == The “pirate wizard” release. Fixes: • When parsing dbus-daemon configuration, tell Expat not to use cryptographic-quality entropy as a salt for its hash tables: we trust the configuration files, so we are not concerned about algorithmic complexity attacks via hash table collisions. This prevents dbus-daemon --system from holding up the boot process (and causing early-boot system services like systemd, logind, networkd to time out) on entropy-starved embedded systems. (fd.o #101858, Simon McVittie) • Increase listen() backlog of AF_UNIX sockets to the maximum possible, minimizing failed connections under heavy load (fd.o #95264, Lennart Poettering) (backported from 1.11.4) • Avoid a -Werror=declaration-after-statement build failure on Solaris (fd.o #102145, Alan Coopersmith) • When using the Monitoring interface, match messages' destinations (fd.o #92074, Simon McVittie) (backported from 1.11.0)
Updated dbus to 1.10.22. D-Bus 1.10.22 (2017-07-27) == The “roof terrace” release. Fixes: • dbus_message_iter_append_basic() no longer leaks memory if it fails to append a file descriptor to a message. (fd.o #101568, Simon McVittie) • dbus_message_iter_open_container() no longer leaks memory if it runs out of memory. (fd.o #101568, Simon McVittie) • dbus_message_append_args_valist() no longer leaks memory if given an unsupported type. This situation is still considered to be a programming error which needs to be corrected by the user of libdbus. (fd.o #101568, Simon McVittie) • Wrap test-pending-call-disconnected with dbus-run-session so that it can pass in environments that are not already running a D-Bus session bus, fixing a build-time test regression in 1.10.20 (fd.o #101698, Simon McVittie) • Ensure that tests fail if they would otherwise have tried to connect to the real session bus (fd.o #101698, Simon McVittie) • Make build-time tests cope with finding Python 3, but not Python 2 (fd.o #101716, Simon McVittie)
Updated dbus to 1.10.20. D-Bus 1.10.20 (2017-06-29) == The “suggesting a delivery gone horribly wrong” release. Fixes: • Fix a reference leak when blocking on a pending call on a connection that has been disconnected (fd.o #101481, Shin-ichi MORITA) • Don't put timestamps in the Doxygen-generated documentation, for closer-to-reproducible builds (fd.o #100692, Simon McVittie) • Avoid an assertion failure when connecting to a semicolon-separated series of addresses, one of which fails (fd.o #101257, Simon McVittie) Documentation: • Update git URIs in HACKING document to sync up with cgit.freedesktop.org (fd.o #100715, Simon McVittie)
Updated dbus to 1.10.18. D-Bus 1.10.18 (2017-04-05) == The “can't handle a self-referential paradox” release. Fixes: • Re-order dbus-daemon startup so that on SELinux systems, the thread that reads AVC notifications retains the ability to write to the audit log (fd.o #92832, Debian #857660; Laurent Bigonville) • Fix a harmless read overflow and some memory leaks in a unit test (fd.o #100568, Philip Withnall)
Use local Docbook DTDs. Fixes issue where xmllint --nonet doesn't actually work.
Updated dbus to 1.10.16. D-Bus 1.10.16 (2017-02-16) == The “super digging powers” release. The fixes in this release are arguably security fixes, but if they affect you, please take this opportunity to rethink how you are configuring dbus. Enhancements: • Do the Travis-CI build in Docker containers for Ubuntu LTS, Debian stable and Debian testing in addition to the older Ubuntu that is the default (fd.o #98889, Simon McVittie) Fixes: • Prevent symlink attacks in the nonce-tcp transport on Unix that could allow an attacker to overwrite a file named "nonce", in a directory that the user running dbus-daemon can write, with a random value known only to the user running dbus-daemon. This is unlikely to be exploitable in practice, particularly since the nonce-tcp transport is really only useful on Windows. On Unix systems we strongly recommend using only the unix: and systemd: transports, together with EXTERNAL authentication. These are the only transports and authentication mechanisms enabled by default, (fd.o #99828, Simon McVittie) • Avoid symlink attacks in the "embedded tests", which are not enabled by default and should never be enabled in production builds of dbus. (fd.o #99828, Simon McVittie)
Updated dbus to 1.10.14. D-Bus 1.10.14 (2016-11-28) == The “Well, other bands know more than three chords” release. Fixes: • Work around an undesired effect of the fix for CVE-2014-3637 (fd.o #80559), in which processes that frequently send fds, such as logind during a flood of new PAM sessions, can get disconnected for continuously having at least one fd "in flight" for too long; dbus-daemon interprets that as a potential denial of service attack. The workaround is to disable that check for uid 0 process such as logind, with a message in the system log. The bug remains open while we look for a more general solution. (fd.o #95263, LP#1591411; Simon McVittie) • Don't run the test test-dbus-launch-x11.sh if X11 autolaunching was disabled at compile time. That test is not expected to work in that configuration. (fd.o #98665, Simon McVittie)
Remove broken and incorrect DEINSTALL script, these directories are correctly handled by OWN_DIRS. Bump PKGREVISION.
Updated dbus to 1.10.12. D-Bus 1.10.12 (2016-10-10) == The “not excessively inhospitable” release. Security fixes: • Do not treat ActivationFailure message received from root-owned systemd name as a format string. In principle this is a security vulnerability, but we do not believe it is exploitable in practice, because only privileged processes can own the org.freedesktop.systemd1 bus name, and systemd does not appear to send activation failures that contain "%". Please note that this probably *was* exploitable in dbus versions older than 1.6.30, 1.8.16 and 1.9.10 due to a missing check which at the time was only thought to be a denial of service vulnerability (CVE-2015-0245). If you are still running one of those versions, patch or upgrade immediately. (fd.o #98157, Simon McVittie) Other fixes: • Harden dbus-daemon against malicious or incorrect ActivationFailure messages by rejecting them if they do not come from a privileged process, or if systemd activation is not enabled (fd.o #98157, Simon McVittie) • Avoid undefined behaviour when setting reply serial number without going via union DBusBasicValue (fd.o #98035, Marc Mutz) • autogen.sh: fail cleanly if autoconf fails (Simon McVittie)
Updated dbus to 1.10.10.
D-Bus 1.10.10 (2016-08-15)
==
The “tungsten door” release.
Fixes:
• On Linux, when dbus-daemon is run with reduced susceptibility to the
OOM killer (typically via systemd), do not let child processes inherit
that setting (fd.o #32851; Kimmo Hämäläinen, WaLyong Cho)
• Output valid shell syntax in ~/.dbus/session-bus/ if the bus address
contains a semicolon (fd.o #94746, Thiago Macieira)
• Fix memory leaks and thread safety in subprocess starting on Windows
(fd.o #95191, Ralf Habacker)
• Do not require systemd to have a service file if using it for activation
(fd.o #93194; Simon McVittie; backport from 1.11.0)
• Stop test-dbus-daemon incorrectly failing on platforms that cannot
discover the process ID of clients (fd.o #96653, Руслан Ижбулатов)
• In tests that exercise correct handling of crashing D-Bus services,
suppress Windows crash handler (fd.o #95155; Yiyang Fei, Ralf Habacker)
• Explicitly check for stdint.h (Ioan-Adrian Ratiu)
• update-activation-environment: produce better diagnostics on error
(fd.o #96653, Simon McVittie)
• Don't fail the build with an unused const variable warning under gcc 6
(fd.o #97282; Thomas Zimmermann, Simon McVittie)
• Merge dbus-1.10-ci branch, containing backports from 1.11.0 in build/test
code to support continuous integration (fd.o #93194, Simon McVittie)
· Avoid -Wunused-label when compiling with libselinux but no libaudit
· In development builds, allow OOM tests to be disabled as documented
· Accept and ignore the --tap argument in all "embedded tests", and run
all automated tests with that argument for better diagnostics
· Fix the systemd activation test under CMake by installing the required
files
· In Automake, fix shell syntax for installcheck-local with no DESTDIR
· In Automake, don't try to run manual tests in installcheck
· In CMake, don't run manual-tcp test as an automated test
· Add travis-ci.org build machinery
File changed, bump pkgrevision. (thanks wiz@!)
Update dbus to 1.10.8 g/c CONFIGURE_ARGS_GROUPS (Unused since PR pkg/50075 point 13) ) D-Bus 1.10.8 (2016-03-07) == The "digestive biscuits" release. Fixes: * Enable "large file support" on systems where it exists: dbus-daemon is not expected to open large files, but it might need to stat files that happen to have large inode numbers (fd.o #93545, Hongxu Jia) * Eliminate padding inside DBusMessageIter on 64-bit platforms, which might result in a pedantic C compiler not copying the entire contents of a DBusMessageIter; statically assert that this is not an ABI change in practice (fd.o #94136, Simon McVittie) * Document dbus-test-tool echo --sleep-ms=N instead of incorrect --sleep=N (fd.o #94244, Dmitri Iouchtchenko) * Correctly report test failures in C tests from run-test.sh (fd.o #93379; amit tewari, Simon McVittie) * When tests are enabled, run all the marshal-validate tests, not just the even-numbered ones (fd.o #93908, Nick Lewycky) * Correct the expected error from one marshal-validate test, which was previously not run due to the above bug (fd.o #93908, Simon McVittie)
Use OPSYSVARS.
Sorry, 1.[odd number] is unstable branch, revert to 1.10.6. Thanks wiz.
Update 1.10.6 to 1.11.0
-----------------------
D-Bus 1.11.0 (2015-12-02)
==
The "peppermint deer" release.
Dependencies:
- On non-Windows platforms, dbus now requires an <inttypes.h> that defines
C99 constants such as PRId64 and PRIu64.
Enhancements:
- D-Bus Specification version 0.27
Specify that services should not reply if NO_REPLY_EXPECTED was used
(fd.o #75749, Lars Uebernickel)
- Add a script to do continuous-integration builds, and metadata to run it
on travis-ci.org. To use this, clone the dbus git repository on GitHub
and set it up with travis-ci.org; the only special setting needed is
"only build branches with a .travis.yml". (fd.o #93194, Simon McVittie)
- If dbus-daemon is run with --systemd-activation, do not require
org.freedesktop.systemd1.service to exist (fd.o #93194, Simon McVittie)
Fixes:
- Re-order dbus-daemon startup so that on SELinux systems, the thread
that reads AVC notifications retains the ability to write to the
audit log (fd.o #92832, Laurent Bigonville)
- Print 64-bit integers on non-GNU Unix platforms (fd.o #92043, Natanael Copa)
- When using the Monitoring interface, match messages' destinations
(fd.o #92074, Simon McVittie)
- On Linux with systemd, stop installing a reference to the obsolete
dbus.target, and enable dbus.socket statically (fd.o #78412, #92402;
Simon McVittie)
- On Windows, when including configuration files with <include> or
<includedir>, apply the same relocation as for the Exec paths
in .service files (fd.o #92028, Simon McVittie)
- Add support for backtraces on Windows (fd.o #92721, Ralf Habacker)
- Fix many -Wpointer-sign warnings (fd.o #93069, Ralf Habacker)
Make post-install commands more resilient.
Update dbus to 1.10.6. Document patches. D-Bus 1.10.6 (2015-12-01) == The “marzipan beetles” release. Fixes: • On Unix when running tests as root, don't assert that root and the dbus-daemon user can still call UpdateActivationEnvironment; assert that those privileged users can call BecomeMonitor instead (fd.o #93036, Simon McVittie) • On Windows, fix a memory leak in the autolaunch transport (fd.o #92899, Simon McVittie) • On Windows Autotools builds, don't run tests that rely on dbus-run-session and other Unix-specifics (fd.o #92899, Simon McVittie)
Update dbus to 1.10.4:
D-Bus 1.10.4 (2015-11-17)
==
The “Frostburn Canyon” release.
Enhancements:
• GetConnectionCredentials, GetConnectionUnixUser and
GetConnectionUnixProcessID with argument "org.freedesktop.DBus"
will now return details of the dbus-daemon itself. This is required
to be able to call SetEnvironment on systemd.
(fd.o #92857, Jan Alexander Steffens)
Fixes:
• Make UpdateActivationEnvironment always fail with AccessDenied on the
system bus. Previously, it was possible to configure it so root could
call it, but the environment variables were not actually used,
because the launch helper would discard them.
(fd.o #92857, Jan Alexander Steffens)
• On Unix with --systemd-activation on a user bus, make
UpdateActivationEnvironment pass on its arguments to systemd's
SetEnvironment method, solving inconsistency between the environments
used for traditional activation and systemd user-service activation.
(fd.o #92857, Jan Alexander Steffens)
• On Windows, don't crash if <syslog/> or --syslog is used
(fd.o #92538, Ralf Habacker)
• On Windows, fix a memory leak when setting a DBusError from a Windows
error (fd.o #92721, Ralf Habacker)
• On Windows, don't go into infinite recursion if we abort the process
with backtraces enabled (fd.o #92721, Ralf Habacker)
• Fix various failing tests, variously on Windows and cross-platform:
· don't test system.conf features (users, groups) that only make sense
on the system bus, which is not supported on Windows
· don't call _dbus_warn() when we skip a test, since it is fatal
· fix computation of expected <standard_session_servicedirs/>
· when running TAP tests, translate newlines to Unix format, fixing
cross-compiled tests under Wine on Linux
· don't stress-test refcounting under Wine, where it's really slow
· stop assuming that a message looped-back to the test will be received
immediately
· skip some system bus tests on Windows since they make no sense there
(fd.o #92538, fd.o #92721; Ralf Habacker, Simon McVittie)
"docbook-xsl" is an indirect dependency, xmlto depends on it.
Needs DocBook to build.
Update dbus to 1.10.2:
D-Bus 1.10.2 (2015-10-26)
==
The “worst pies in London” release.
Fixes:
• Correct error handling for activation: if there are multiple attempts
to activate the same service and it fails immediately, the first attempt
would get the correct reply, but the rest would time out. We now send
the same error reply to each attempt. (fd.o #92200, Simon McVittie)
• If BecomeMonitor is called with a syntactically invalid match rule,
don't crash with an assertion failure, fixing a regression in 1.9.10.
This was not exploitable as a denial of service, because the check
for a privileged user is done first. (fd.o #92298, Simon McVittie)
• On Linux with --enable-user-session, add the bus address to the
environment of systemd services for better backwards compatibility
(fd.o #92612, Jan Alexander Steffens)
• On Windows, fix the logic for replacing the installation prefix
in service files' Exec lines (fd.o #83539; Milan Crha, Simon McVittie)
• On Windows, if installed in the conventional layout with ${prefix}/etc
and ${prefix}/share, use relative paths between bus configuration files
to allow the tree to be relocated (fd.o #92028, Simon McVittie)
• Make more of the regression tests pass in Windows builds (fd.o #92538,
Simon McVittie)
Explicitly prevent the configure script from picking up a per-user tmp directory.
Bump PKGREVISION. * Prepare target directories for DBus consumers. O.K. wiz@.
Remove CONFIGURE_ARGS.enable scheme, in favor of normal CONFIGURE_ARGS. No functional change intended, so no PKGREVISION++. From David Shao via PR pkg/50075 and private followup.
Update to 1.10.0:
D-Bus 1.10.0 (2015-08-25)
==
The “0x20” release.
This is a new stable branch, recommended for use in OS distributions.
Fixes since 1.9.20:
• distribute test/tap-test.sh.in, even if the tarball was built without
tests enabled (fd.o #91684, Simon McVittie)
• work around a fd leak in libcap-ng < 0.7.7 (fd.o #91684, Simon McVittie)
Summary of major changes since 1.8.0:
• The basic setup for the well-known system and session buses is
now done in read-only files in ${datadir} (normally /usr/share).
See the NEWS entry for 1.9.18 for details.
• AppArmor integration has been merged, with features similar to the
pre-existing SELinux integration. It is mostly compatible with the
patches previously shipped by Ubuntu, with one significant change:
Ubuntu's GetConnectionAppArmorSecurityContext method has been superseded
by GetConnectionCredentials and was not included.
• The --enable-user-session configure option can be enabled
by OS integrators intending to use systemd to provide a session bus
per user (in effect, treating all concurrent graphical and non-graphical
login sessions as one large session).
• The new listenable address mode "unix:runtime=yes" listens on
$XDG_RUNTIME_DIR/bus, the same AF_UNIX socket used by the systemd
user session. libdbus and "dbus-launch --autolaunch" will connect to
this address by default. GLib ≥ 2.45.3 and sd-bus ≥ 209 have a
matching default.
• All executables are now dynamically linked to libdbus-1.
Previously, some executables, most notably dbus-daemon, were statically
linked to a specially-compiled variant of libdbus. This results in
various private functions in the _dbus namespace being exposed by the
shared library. These are not API, and must not be used outside
the dbus source tree.
• On platforms with ELF symbol versioning, all public symbols
are versioned LIBDBUS_1_3.
New bus APIs:
• org.freedesktop.DBus.GetConnectionCredentials returns
LinuxSecurityLabel where supported
• org.freedesktop.DBus.Monitoring interface (privileged)
· BecomeMonitor method supersedes match rules with eavesdrop=true,
which are now deprecated
• org.freedesktop.DBus.Stats interface (semi-privileged)
· now enabled by default
· new GetAllMatchRules method
New executables:
• dbus-test-tool
• dbus-update-activation-environment
New optional dependencies:
• The systemd: pseudo-transport requires libsystemd or libsd-daemon
• Complete documentation requires Ducktype and yelp-tools
• Full test coverage requires GLib 2.36 and PyGI
• AppArmor integration requires libapparmor and optionally libaudit
Dependencies removed:
• dbus-glib
D-Bus 1.9.20 (2015-08-06)
==
The “Remember Tomorrow” release.
This is a release-candidate for D-Bus 1.10.0. OS distribution vendors
should test it.
Fixes:
• Don't second-guess what the ABI of poll() is, allowing it to be used
on Integrity RTOS and other unusual platforms (fd.o #90314;
Rolland Dudemaine, Simon McVittie)
• Don't duplicate audit subsystem integration if AppArmor and SELinux are
both enabled (fd.o #89225, Simon McVittie)
• Log audit events for AppArmor/SELinux policy violations whenever
we have CAP_AUDIT_WRITE, even if not the system bus
(fd.o #83856, Laurent Bigonville)
D-Bus 1.9.18 (2015-07-21)
==
The “Pirate Elite” release.
Configuration changes:
• The basic setup for the well-known system and session buses is now done
in read-only files in ${datadir}, moving a step closer to systems
that can operate with an empty /etc directory. In increasing order
of precedence:
· ${datadir}/dbus-1/s*.conf now perform the basic setup such as setting
the default message policies.
· ${sysconfdir}/dbus-1/s*.conf are now optional. By default
dbus still installs a trivial version of each, for documentation
purposes; putting configuration directives in these files is deprecated.
· ${datadir}/dbus-1/s*.d/ are now available for third-party software
to install "drop-in" configuration snippets (any packages
using those directories should explicitly depend on at least this
version of dbus).
· ${sysconfdir}/dbus-1/s*.d/ are also still available for sysadmins
or third-party software to install "drop-in" configuration snippets
· ${sysconfdir}/dbus-1/s*-local.conf are still available for sysadmins'
overrides
${datadir} is normally /usr/share, ${sysconfdir} is normally /etc,
and "s*" refers to either system or session as appropriate.
(fd.o #89280, Dimitri John Ledkov)
Fixes:
• Fix a memory leak when GetConnectionCredentials() succeeds
(fd.o #91008, Jacek Bukarewicz)
• Ensure that dbus-monitor does not reply to messages intended for others,
resulting in its own disconnection (fd.o #90952, Simon McVittie)
D-Bus 1.9.16 (2015-05-14)
==
The “titanium barns” release.
Dependencies:
• Automake 1.13 is now required when compiling from git or modifying
the build system.
Security hardening:
• On Unix platforms, change the default configuration for the session bus
to only allow EXTERNAL authentication (secure kernel-mediated
credentials-passing), as was already done for the system bus.
This avoids falling back to DBUS_COOKIE_SHA1, which relies on strongly
unpredictable pseudo-random numbers.
If you are using D-Bus over the (unencrypted!) tcp: or nonce-tcp: transport,
in conjunction with DBUS_COOKIE_SHA1 and a shared home directory using
NFS or similar, you will need to reconfigure the session bus to accept
DBUS_COOKIE_SHA1 by commenting out the <auth> element. This configuration
is not recommended.
(fd.o #90414, Simon McVittie)
• When asked for random numbers for DBUS_COOKIE_SHA1, the nonce-tcp:
transport, UUIDs or any other reason, fail if we cannot obtain entropy
(from /dev/urandom or CryptGenRandom()) or an out-of-memory condition
occurs, instead of silently falling back to low-entropy pseudorandom
numbers from rand(). (fd.o #90414; Simon McVittie, Ralf Habacker)
Enhancements:
• Add dbus_message_iter_get_element_count()
(fd.o #30350; Christian Dywan, Simon McVittie)
• Introduce new internal DBusSocket and DBusPollable types so we can
stop treating the Windows SOCKET type as if it was int. DBusSocket
is specifically a socket, cross-platform. DBusPollable is whatever
_dbus_poll() can act on, i.e. a fd on Unix or a SOCKET on Windows.
(fd.o #89444; Ralf Habacker, Simon McVittie)
• All regression tests now output TAP <https://testanything.org/>
(fd.o #89846, Simon McVittie)
• Internal APIs consistently use signed values for timestamps
(fd.o #18494, Peter McCurdy)
• Improve diagnostics when UpdateActivationEnvironment calls are rejected
(fd.o #88812, Simon McVittie)
• Clean up a lot of compiler warnings
(fd.o #17289, fd.o #89284; Ralf Habacker, Simon McVittie)
Fixes:
• Add locking to DBusCounter's reference count and notify function
(fd.o #89297, Adrian Szyndela)
• Ensure that DBusTransport's reference count is protected by the
corresponding DBusConnection's lock (fd.o #90312, Adrian Szyndela)
• Correctly release DBusServer mutex before early-return if we run out
of memory while copying authentication mechanisms (fd.o #90021,
Ralf Habacker)
• Make dbus-test-tool and dbus-update-activation-environment portable
to Windows (fd.o #90089, Ralf Habacker)
• Correctly initialize all fields of DBusTypeReader (fd.o #90021;
Ralf Habacker, Simon McVittie)
• Fix some missing \n in verbose (debug log) messages (fd.o #90004,
Ralf Habacker)
• Clean up some memory and fd leaks in test code and tools
(fd.o #90021, Ralf Habacker)
• Fix a NULL dereference if the dbus-daemon cannot read a configuration
directory for a reason that is not ENOENT (fd.o #90021, Ralf Habacker)
• CMake generates a versioned shared library even if the revision is 0,
as it usually is on the development branch. (fd.o #89450, Ralf Habacker)
D-Bus 1.9.14 (2015-03-02)
==
The “don't stand in the poison cloud” release.
Dependencies:
• dbus-daemon and dbus-daemon-launch-helper now require libdbus. They
were previously linked to a static version of libdbus.
• The tests no longer require dbus-glib in order to exercise the libdbus
shared library; they are always linked to libdbus now.
Build-time configuration:
• The new --enable-user-session option, off by default, can be enabled
by OS integrators intending to use systemd to provide a session bus
per user (in effect, treating all concurrent graphical and non-graphical
login sessions as one large session)
Enhancements:
• All executables are now linked dynamically to libdbus.
(fd.o #83115; Bertrand SIMONNET, Simon McVittie, Ralf Habacker)
• On platforms that support them (GNU libc and possibly others),
libdbus now has versioned symbols for its public API.
All public symbols (visible in the header files) are currently
versioned as LIBDBUS_1_3; private symbols starting with _dbus or
dbus_internal have a version that changes with each release, and
must not be used by applications. (also fd.o #83115)
• New listenable address mode "unix:runtime=yes" which listens on
a real filesystem (non-abstract) socket $XDG_RUNTIME_DIR/bus
(fd.o #61303; Colin Walters, Alexander Larsson, Simon McVittie)
• Add optional systemd units for a per-user bus listening on
$XDG_RUNTIME_DIR/bus (fd.o #61301; Simon McVittie, Colin Walters)
• On Unix platforms, both libdbus and "dbus-launch --autolaunch"
default to connecting to $XDG_RUNTIME_DIR/bus if it is a socket
(also fd.o #61301)
• New dbus-update-activation-environment tool uploads environment
variables to "dbus-daemon --session" and optionally "systemd --user",
primarily as a way to keep the per-user bus compatible with
distributions' existing X11 login scripts (also fd.o #61301)
• <includedir/> elements in dbus-daemon configuration are now silently
ignored if the directory does not exist. (fd.o #89280, Dimitri John Ledkov)
• Add microsecond-resolution timestamps to the default output of
dbus-monitor and dbus-send (fd.o #88896; Ralf Habacker, Simon McVittie)
Fixes:
• Fix a race condition in the 'monitor' test introduced in 1.9.10
(fd.o #89222, Simon McVittie)
D-Bus 1.9.12 (2015-02-19)
==
The “monster lasagna” release.
Dependencies:
• Ducktype and yelp-tools are now required to build complete documentation
(they are optional for normal builds).
Enhancements:
• D-Bus Specification version 0.26
· GetConnectionCredentials can return LinuxSecurityLabel or WindowsSID
· document the BecomeMonitor method
• On Linux, add LinuxSecurityLabel to GetConnectionCredentials
(fd.o #89041; Tyler Hicks, Simon McVittie)
• On Linux, add support for AppArmor mediation of message sending and
receiving and name ownership (paralleling existing SELinux mediation
support), and eavesdropping (a new check, currently AppArmor-specific)
(fd.o #75113; John Johansen, Tyler Hicks, Simon McVittie)
• In dbus-send and dbus-monitor, pretty-print \0-terminated bytestrings
that have printable ASCII contents; we previously only did this for
unterminated bytestrings (fd.o #89109, Simon McVittie)
• Add a guide to designing good D-Bus APIs (fd.o #88994, Philip Withnall)
• On Windows, add WindowsSID to GetConnectionCredentials
(fd.o #54445, Ralf Habacker)
• Improve clarity of dbus-monitor --profile output and add more columns
(fd.o #89165, Ralf Habacker)
• Add a man page for dbus-test-tool, and build it under CMake as well
as Autotools (fd.o#89086, Simon McVittie)
• If dbus-daemon was compiled with --enable-verbose, add a D-Bus API
to control it at runtime, overriding the DBUS_VERBOSE environment variable
(fd.o #88896, Ralf Habacker)
Fixes:
• Reduce the number of file descriptors used in the fd-passing test,
avoiding failure under the default Linux fd limit, and automatically
skip it if the rlimit is too small (fd.o #88998, Simon McVittie)
D-Bus 1.9.10 (2015-02-09)
==
The “sad cyborgs” release.
Security fixes merged from 1.8.16:
• Do not allow non-uid-0 processes to send forged ActivationFailure
messages. On Linux systems with systemd activation, this would
allow a local denial of service: unprivileged processes could
flood the bus with these forged messages, winning the race with
the actual service activation and causing an error reply
to be sent back when service auto-activation was requested.
This does not prevent the real service from being started,
so the attack only works while the real service is not running.
(CVE-2015-0245, fd.o #88811; Simon McVittie)
Enhancements:
• The new Monitoring interface in the dbus-daemon lets dbus-monitor and
similar tools receive messages without altering the security properties
of the system bus, by calling the new BecomeMonitor method on a
private connection. This bypasses the normal <allow> and <deny> rules
entirely, so to preserve normal message-privacy assumptions, only root
is allowed to do this on the system bus. Restricted environments,
such as Linux with LSMs, should lock down access to the Monitoring
interface. (fd.o #46787, Simon McVittie)
• dbus-monitor uses BecomeMonitor to capture more traffic, if the
dbus-daemon supports it and access permissions allow it.
It still supports the previous approach ("eavesdropping" match rules)
for compatibility with older bus daemons. (fd.o #46787, Simon)
• dbus-monitor can now log the message stream as binary data for later
analysis, with either no extra framing beyond the normal D-Bus headers,
or libpcap-compatible framing treating each D-Bus message
as a captured packet. (fd.o #46787, Simon)
Other fixes:
• Fix some CMake build regressions (fd.o #88964, Ralf Habacker)
• On Unix, forcibly terminate regression tests after 60 seconds to
prevent them from blocking continuous integration frameworks
(fd.o #46787, Simon)
D-Bus 1.9.8 (2015-02-03)
==
The “all the types of precipitation” release.
Dependencies:
• full test coverage now requires GLib 2.36
• full test coverage now requires PyGI (PyGObject 3,
"import gi.repository.GObject") instead of the
obsolete PyGObject 2 ("import gobject")
Enhancements:
• add GLib-style "installed tests" (fd.o #88810, Simon McVittie)
• better regression test coverage, including systemd activation
(fd.o #57952, #88810; Simon McVittie)
Fixes:
• fatal errors correctly make the dbus-daemon exit even if <syslog/> is
turned off (fd.o #88808, Simon McVittie)
• TCP sockets on Windows no longer fail to listen approximately 1 time
in 256, caused by a logic error that should have always made it fail but
was mitigated by incorrect endianness for the port number
(fd.o #87999, Ralf Habacker)
• fix some Windows build failures (fd.o #88009, #88010; Ralf Habacker)
• on Windows, allow up to 8K connections to the dbus-daemon instead of the
previous 64, completing a previous fix which only worked under
Autotools (fd.o #71297, Ralf Habacker)
• on Windows, if the IP family is unspecified only use IPv4,
to mitigate IPv6 not working correctly (fd.o #87999, Ralf Habacker)
• fix some unlikely memory leaks on OOM (fd.o #88087, Simon McVittie)
• lcov code coverage analysis works again (fd.o #88808, Simon McVittie)
• fix an unused function error with --disable-embedded-tests (fd.o #87837,
Thiago Macieira)
D-Bus 1.9.6 (2015-01-05)
==
The “I do have a bread knife” release.
Security hardening:
• Do not allow calls to UpdateActivationEnvironment from uids other than
the uid of the dbus-daemon. If a system service installs unsafe
security policy rules that allow arbitrary method calls
(such as CVE-2014-8148) then this prevents memory consumption and
possible privilege escalation via UpdateActivationEnvironment.
We believe that in practice, privilege escalation here is avoided
by dbus-daemon-launch-helper sanitizing its environment; but
it seems better to be safe.
• Do not allow calls to UpdateActivationEnvironment or the Stats interface
on object paths other than /org/freedesktop/DBus. Some system services
install unsafe security policy rules that allow arbitrary method calls
to any destination, method and interface with a specified object path;
while less bad than allowing arbitrary method calls, these security
policies are still harmful, since dbus-daemon normally offers the
same API on all object paths and other system services might behave
similarly.
Other fixes:
• Add missing initialization so GetExtendedTcpTable doesn't crash on
Windows Vista SP0 (fd.o #77008, Илья А. Ткаченко)
D-Bus 1.9.4 (2014-11-24)
==
The “extra-sturdy caramel” release.
Fixes:
• Partially revert the CVE-2014-3639 patch by increasing the default
authentication timeout on the system bus from 5 seconds back to 30
seconds, since this has been reported to cause boot regressions for
some users, mostly with parallel boot (systemd) on slower hardware.
On fast systems where local users are considered particularly hostile,
administrators can return to the 5 second timeout (or any other value
in milliseconds) by saving this as /etc/dbus-1/system-local.conf:
<busconfig>
<limit name="auth_timeout">5000</limit>
</busconfig>
(fd.o #86431, Simon McVittie)
• Add a message in syslog/the Journal when the auth_timeout is exceeded
(fd.o #86431, Simon McVittie)
• Send back an AccessDenied error if the addressed recipient is not allowed
to receive a message (and in builds with assertions enabled, don't
assert under the same conditions). (fd.o #86194, Jacek Bukarewicz)
D-Bus 1.9.2 (2014-11-10)
==
The “structurally unsound flapjack” release.
Security fixes:
• Increase dbus-daemon's RLIMIT_NOFILE rlimit to 65536
so that CVE-2014-3636 part A cannot exhaust the system bus'
file descriptors, completing the incomplete fix in 1.8.8.
(CVE-2014-7824, fd.o #85105; Simon McVittie, Alban Crequy)
Enhancements:
• D-Bus Specification version 0.25
· new value 'const' for EmitsChangedSignal annotation
(fd.o #72958, Lennart Poettering)
· new ALLOW_INTERACTIVE_AUTHORIZATION flag, for PolicyKit and similar
(fd.o #83449; Lennart Poettering, Simon McVittie)
· annotate table of types with reserved/basic/container, and for
basic types, fixed/string-like
· clarify arbitrary limits by quoting them in mebibytes
• New API: add accessors for the ALLOW_INTERACTIVE_AUTHORIZATION flag
(fd.o #83449, Simon McVittie)
• Add dbus-test-tool, a D-Bus swiss army knife with multiple subcommands,
useful for debugging and performance testing:
· dbus-test-tool spam: send repeated messages
· dbus-test-tool echo: send an empty reply for all method calls
· dbus-test-tool black-hole: do not reply to method calls
(fd.o #34140; Alban Crequy, Simon McVittie, Will Thompson)
• Add support for process ID in credentials-passing on NetBSD
(fd.o #69702, Patrick Welche)
• Add an example script to find potentially undesired match rules
(fd.o #84598, Alban Crequy)
• Document the central assumption that makes our use of credentials-passing
secure (fd.o #83499, Simon McVittie)
• Replace the dbus-glib section of the tutorial with a GDBus recommendation,
and add some links to GDBus and QtDBus documentation (fd.o #25140,
Simon McVittie)
Fixes:
• Use a less confusing NoReply message when disconnected with a reply pending
(fd.o #76112, Simon McVittie)
• Make the .pc file relocatable by letting pkg-config do all variable
expansion itself (fd.o #75858, Руслан Ижбулатов)
• Fix a build failure on platforms with kqueue, which regressed in 1.9.0
(fd.o #85563, Patrick Welche)
• Consistently save errno after socket calls (fd.o #83625, Simon McVittie)
• In dbus-spawn, when the grandchild process exits due to a failed exec(),
do not lose the exec() errno (fd.o #24821, Simon McVittie)
• Do not fail the tests if a parent process has leaked non-close-on-exec
file descriptors to us (fd.o #73689, fd.o #83899; Simon McVittie)
• Do not fail the tests on Unix platforms with incomplete
credentials-passing support, but do fail if we can't pass credentials
on a platform where it is known to work: Linux, FreeBSD, OpenBSD, NetBSD
(fd.o #69702, Simon McVittie)
• Detect accept4, dirfd, inotify_init1, pipe2, and Unix fd passing
when building with cmake, and expand test coverage there
(fd.o #73689; Ralf Habacker, Simon McVittie)
D-Bus 1.9.0 (2014-10-01)
==
The “tiered cheeses” release.
Requirements:
• Support for the systemd: (LISTEN_FDS) pseudo-transport on Linux now
requires either the libsystemd or libsd-daemon shared library, dropping the
embedded convenience copy of sd-daemon (fd.o #71818, Simon)
Build-time configuration changes:
• The Stats interface is now enabled by default, and locked-down to
root-only on the system bus. Configure with --disable-stats
to disable it altogether on memory- or disk-constrained systems,
or see ${docdir}/examples/ to open it up to non-root users on the
system bus or restrict access on the session bus.
(fd.o #80759; Simon McVittie, Alban Crequy)
• The CMake build system now builds the same shared library name as Autotools
on at least Linux and Windows:
- on Linux (and perhaps other Unix platforms), it previously built
libdbus-1.so, but now builds libdbus-1.so.3.* with development
symlink libdbus-1.so and SONAME/symlink libdbus-1.so.3
- on Windows, it previously built either libdbus-1.dll (release) or
libdbus-1d.dll (debug), but now builds libdbus-1-3.dll, copied to
libdbus-1.dll for compatibility with older applications.
(fd.o #74117, Ralf Habacker)
Enhancements:
• D-Bus Specification version 0.24
· document how to quote match rules (fd.o #24307, Simon McVittie)
· explicitly say that most message types never expect a reply
regardles of whether they have NO_REPLY_EXPECTED
(fd.o #75749, Simon McVittie)
• on Unix platforms, disable Nagle's algorithm on TCP connections to improve
initial latency (fd.o #75544, Matt Hoosier)
• use backtrace() if it is in -lexecinfo instead of libc, as on NetBSD
(fd.o #69702, Patrick Welche)
• in dbus-monitor, print more information about file descriptors
(fd.o #80603, Alban Crequy)
• do not install system bus configuration if built for Windows
(fd.o #83583; Ralf Habacker, Simon McVittie)
• Add GetAllMatchRules to the Stats interface (fd.o #24307, Alban Crequy)
• Add a regression test for file descriptor passing (fd.o #83622,
Simon McVittie)
Fixes:
• fix an incorrect error message if a Unix socket path is too long
(fd.o #73887, Antoine Jacoutot)
• in an MSYS/Cygwin environment, pass Unix-style filenames to xmlto,
fixing documentation generation (fd.o #75860, Руслан Ижбулатов)
• in Unix with X11, avoid giving dbus-launch a misleading argv[0]
in ps(1) (fd.o #69716, Chengwei Yang)
• avoid calling poll() with timeout < -1, which is considered invalid
on FreeBSD and NetBSD (fd.o #78480, Jaap Boender)
• be portable to BSD-derived platforms where O_CLOEXEC is unavailable in libc
(like Mac OS X 10.6), or available in libc but unsupported by the kernel
(fd.o #77032; rmvsxop, OBATA Akio, Patrick Welche)
• Fix include path for test/internal/*.c with cmake (Ralf Habacker)
• Documentation improvements
(fd.o #80795, #84313; Thomas Haller, Sebastian Rasmussen)
• in dbus-monitor, do not leak file descriptors that we have monitored
(fd.o #80603, Alban Crequy)
• Set the close-on-exec flag for the inotify file descriptor, even
if built with CMake or older libc (fd.o #73689, Simon McVittie)
• Remove some LGPL code from the Windows dbus-daemon
(fd.o #57272, Ralf Habacker)
Update to 1.8.20: D-Bus 1.8.20 (2015-07-21) == The “Iguana Vanguard” release. Fixes: • Fix a memory leak when GetConnectionCredentials() succeeds (fd.o #91008, Jacek Bukarewicz) • Ensure that dbus-monitor does not reply to messages intended for others (fd.o #90952, Simon McVittie)
Build manpages and xml docs, adding introspect files needed in other packages in order to be able to use 'xsltproc --nonet' (e.g. empathy, upower, ...) Update smf files to better deal with creating /var/run/dbus structures on SunOS update PKGREVISION
Update to 1.8.18: D-Bus 1.8.18 (2015-05-14) == The “unicorn rifts” release. Security hardening: • On Unix platforms, change the default configuration for the session bus to only allow EXTERNAL authentication (secure kernel-mediated credentials-passing), as was already done for the system bus. This avoids falling back to DBUS_COOKIE_SHA1, which relies on strongly unpredictable pseudo-random numbers; under certain circumstances (/dev/urandom unreadable or malloc() returns NULL), dbus could fall back to using rand(), which does not have the desired unpredictability. The fallback to rand() has not been changed in this stable-branch since the necessary code changes for correct error-handling are rather intrusive. If you are using D-Bus over the (unencrypted!) tcp: or nonce-tcp: transport, in conjunction with DBUS_COOKIE_SHA1 and a shared home directory using NFS or similar, you will need to reconfigure the session bus to accept DBUS_COOKIE_SHA1 by commenting out the <auth> element. This configuration is not recommended. (fd.o #90414, Simon McVittie) Other fixes: • Add locking to DBusCounter's reference count and notify function (fd.o #89297, Adrian Szyndela) • Ensure that DBusTransport's reference count is protected by the corresponding DBusConnection's lock (fd.o #90312, Adrian Szyndela) • On Windows, listen on the same port for IPv4 and IPv6 (previously broken by an endianness mistake), and fix a failure to bind TCP sockets on approximately 1 attempt in 256 (fd.o #87999, Ralf Habacker) • Correctly release DBusServer mutex before early-return if we run out of memory while copying authentication mechanisms (fd.o #90004, Ralf Habacker) • Fix some missing \n in verbose (debug log) messages (fd.o #90004, Ralf Habacker) • Clean up some memory leaks in test code (fd.o #90004, Ralf Habacker)
Remove more references to python-2.6.
Update to 1.8.16: D-Bus 1.8.16 (2015-02-09) == The “poorly concealed wrestlers” release. Security fixes: • Do not allow non-uid-0 processes to send forged ActivationFailure messages. On Linux systems with systemd activation, this would allow a local denial of service: unprivileged processes could flood the bus with these forged messages, winning the race with the actual service activation and causing an error reply to be sent back when service auto-activation was requested. This does not prevent the real service from being started, so it only works while the real service is not running. (CVE-2015-0245, fd.o #88811; Simon McVittie) Other fixes: • fix a Windows build failure (fd.o #88009, Ralf Habacker) • on Windows, allow up to 8K connections to the dbus-daemon instead of the previous 64, completing a previous fix which only worked under Autotools (fd.o #71297, Ralf Habacker)
PR 49591: Make launchd integration a package option, disabled by default for now. launchd integration currently requires manual steps as described in MESSAGE.launchd. We may want to make it default once we have a framework for automatic launchd support.
PR 49591: Add MESSAGE.launchd to let Darwin users know about the launchd agent configuration file.
Install launchd script on Darwin. From Youri Mouton in PR 49591. Bump PKGREVISION.
Update to 1.8.14: D-Bus 1.8.14 (2015-01-05) == The “40lb of roofing nails” release. Security hardening: • Do not allow calls to UpdateActivationEnvironment from uids other than the uid of the dbus-daemon. If a system service installs unsafe security policy rules that allow arbitrary method calls (such as CVE-2014-8148) then this prevents memory consumption and possible privilege escalation via UpdateActivationEnvironment. We believe that in practice, privilege escalation here is avoided by dbus-daemon-launch-helper sanitizing its environment; but it seems better to be safe. • Do not allow calls to UpdateActivationEnvironment or the Stats interface on object paths other than /org/freedesktop/DBus. Some system services install unsafe security policy rules that allow arbitrary method calls to any destination, method and interface with a specified object path; while less bad than allowing arbitrary method calls, these security policies are still harmful, since dbus-daemon normally offers the same API on all object paths and other system services might behave similarly. Other fixes: • Add missing initialization so GetExtendedTcpTable doesn't crash on Windows Vista SP0 (fd.o #77008, Илья А. Ткаченко)
Update to 1.8.12:
D-Bus 1.8.12 (2014-11-24)
==
The “days of fuchsia passed” release.
Fixes:
• Partially revert the CVE-2014-3639 patch by increasing the default
authentication timeout on the system bus from 5 seconds back to 30
seconds, since this has been reported to cause boot regressions for
some users, mostly with parallel boot (systemd) on slower hardware.
On fast systems where local users are considered particularly hostile,
administrators can return to the 5 second timeout (or any other value
in milliseconds) by saving this as /etc/dbus-1/system-local.conf:
<busconfig>
<limit name="auth_timeout">5000</limit>
</busconfig>
(fd.o #86431, Simon McVittie)
• Add a message in syslog/the Journal when the auth_timeout is exceeded
(fd.o #86431, Simon McVittie)
• Send back an AccessDenied error if the addressed recipient is not allowed
to receive a message (and in builds with assertions enabled, don't
assert under the same conditions). (fd.o #86194, Jacek Bukarewicz)
Update dbus to 1.8.10 The "tenants with a leaking roof get priority" release. Security fixes: * Increase dbus-daemon's RLIMIT_NOFILE rlimit to 65536 so that CVE-2014-3636 part A cannot exhaust the system bus' file descriptors, completing the incomplete fix in 1.8.8. (CVE-2014-7824, fd.o #85105; Simon McVittie, Alban Crequy)
Update to 1.8.8, many security fixes. D-Bus 1.8.8 (2014-09-16) == The "smashy smashy egg man" release. Security fixes: * Do not accept an extra fd in the padding of a cmsg message, which could lead to a 4-byte heap buffer overrun. (CVE-2014-3635, fd.o #83622; Simon McVittie) * Reduce default for maximum Unix file descriptors passed per message from 1024 to 16, preventing a uid with the default maximum number of connections from exhausting the system bus' file descriptors under Linux's default rlimit. Distributors or system administrators with a more restrictive fd limit may wish to reduce these limits further. Additionally, on Linux this prevents a second denial of service in which the dbus-daemon can be made to exceed the maximum number of fds per sendmsg() and disconnect the process that would have received them. (CVE-2014-3636, fd.o #82820; Alban Crequy) * Disconnect connections that still have a fd pending unmarshalling after a new configurable limit, pending_fd_timeout (defaulting to 150 seconds), removing the possibility of creating an abusive connection that cannot be disconnected by setting up a circular reference to a connection's file descriptor. (CVE-2014-3637, fd.o #80559; Alban Crequy) * Reduce default for maximum pending replies per connection from 8192 to 128, mitigating an algorithmic complexity denial-of-service attack (CVE-2014-3638, fd.o #81053; Alban Crequy) * Reduce default for authentication timeout on the system bus from 30 seconds to 5 seconds, avoiding denial of service by using up all unauthenticated connection slots; and when all unauthenticated connection slots are used up, make new connection attempts block instead of disconnecting them. (CVE-2014-3639, fd.o #80919; Alban Crequy) Other fixes: * Check for libsystemd from systemd >= 209, falling back to the older separate libraries if not found (Umut Tezduyar Lindskog, Simon McVittie) * On Linux, use prctl() to disable core dumps from a test executable that deliberately raises SIGSEGV to test dbus-daemon's handling of that condition (fd.o #83772, Simon McVittie) * Fix compilation with --enable-stats (fd.o #81043, Gentoo #507232; Alban Crequy) * Improve documentation for running tests on Windows (fd.o #41252, Ralf Habacker)
Add smf support and solaris-specific console_user verification bump PKGREVISION
Pullup ticket #4442 - requested by wiz
sysutils/dbus: security update
Revisions pulled up:
- sysutils/dbus/Makefile 1.72
- sysutils/dbus/distinfo 1.57
---
Module Name: pkgsrc
Committed By: wiz
Date: Sun Jul 6 14:54:32 UTC 2014
Modified Files:
pkgsrc/sysutils/dbus: Makefile distinfo
Log Message:
Update to 1.8.6:
D-Bus 1.8.6 (2014-06-02)
==
Security fixes:
• On Linux ≥ 2.6.37-rc4, if sendmsg() fails with ETOOMANYREFS, silently drop
the message. This prevents an attack in which a malicious client can
make dbus-daemon disconnect a system service, which is a local
denial of service.
(fd.o #80163, CVE-2014-3532; Alban Crequy)
• Track remaining Unix file descriptors correctly when more than one
message in quick succession contains fds. This prevents another attack
in which a malicious client can make dbus-daemon disconnect a system
service.
(fd.o #79694, fd.o #80469, CVE-2014-3533; Alejandro Martínez Suárez,
Simon McVittie, Alban Crequy)
Other fixes:
• When dbus-launch --exit-with-session starts a dbus-daemon but then cannot
attach to a session, kill the dbus-daemon as intended
(fd.o #74698, Роман Донченко)
Update to 1.8.6: D-Bus 1.8.6 (2014-06-02) == Security fixes: • On Linux ≥ 2.6.37-rc4, if sendmsg() fails with ETOOMANYREFS, silently drop the message. This prevents an attack in which a malicious client can make dbus-daemon disconnect a system service, which is a local denial of service. (fd.o #80163, CVE-2014-3532; Alban Crequy) • Track remaining Unix file descriptors correctly when more than one message in quick succession contains fds. This prevents another attack in which a malicious client can make dbus-daemon disconnect a system service. (fd.o #79694, fd.o #80469, CVE-2014-3533; Alejandro Martínez Suárez, Simon McVittie, Alban Crequy) Other fixes: • When dbus-launch --exit-with-session starts a dbus-daemon but then cannot attach to a session, kill the dbus-daemon as intended (fd.o #74698, Роман Донченко)
Bump PKGREVISION for O_CLOEXEC patch change and libexecinfo detection.
Fix build failure on Linux (PLIST issue)
Update to 1.8.4: D-Bus 1.8.4 (2014-06-10) == Security fix: • Alban Crequy at Collabora Ltd. discovered and fixed a denial-of-service flaw in dbus-daemon, part of the reference implementation of D-Bus. Additionally, in highly unusual environments the same flaw could lead to a side channel between processes that should not be able to communicate. (CVE-2014-3477, fd.o #78979)
Update to 1.8.2: D-Bus 1.8.2 (2014-04-30) == The “nobody wants red” release. Enhancements: • in the CMake build system, add some hints for Linux users cross-compiling Windows D-Bus binaries to be able to run tests under Wine (fd.o #41252, Ralf Habacker) • add Documentation key to dbus.service (fd.o #77447, Cameron Norman) Fixes: • in "dbus-uuidgen --ensure", try to copy systemd's /etc/machine-id to /var/lib/dbus/machine-id instead of generating an entirely new ID (fd.o #77941, Simon McVittie) • if dbus-launch receives an X error very quickly, do not kill unrelated processes (fd.o #74698, Роман Донченко) • on Windows, allow up to 8K connections to the dbus-daemon, instead of the previous 64 (fd.o #71297; Cristian Onet, Ralf Habacker) • cope with \r\n newlines in regression tests, since on Windows, dbus-daemon.exe uses text mode (fd.o #75863, Руслан Ижбулатов)
Fix poll() wrapper: all negative timeouts are acceptable as infinity on Linux, but on *BSD, only -1 means infinite.
Update to 1.8.0:
D-Bus 1.8.0 (2014-01-20)
==
The “Wolverine distrusts my printer” release.
This starts a new stable branch. The 1.6.x branch is now considered to be
outdated, and will only receive fixes for serious bugs such as security
flaws. The 1.4.x and 1.2.x branches no longer have upstream support and
are unlikely to get any more releases, but if distributors still need to
support them, please share security patches via upstream.
Summary of changes since 1.6.x:
• libdbus always behaves as if dbus_threads_init_default() had been called
(thread-safety by default)
• new dbus-run-session tool, replacing certain misuses of dbus-launch
• dbus-monitor can talk to outdated versions of dbus-daemon again
• new org.freedesktop.DBus.GetConnectionCredentials method
• GetConnectionUnixProcessID also works correctly on Windows, returning
the Windows process ID
• GetConnectionWindowsSID returns the correct SID on Windows
• expat is required, libxml2 can no longer be used as a substitute
• the userDB cache is required, and cannot be disabled
• a 64-bit integer type (either int, long, long long or _int64) is required
• better systemd-journald integration on Linux
• fixed long-standing fd and array leaks when failing to parse a message
• fixed referenced-but-never-freed parent nodes (effectively memory leaks)
when using certain object-path allocation patterns, notably in Avahi
• better defaults for Windows support
• better CMake support
• better portability to mingw32, FreeBSD, NetBSD, QNX and Hurd
• the source language for the man pages is now Docbook XML
Enhancements since 1.7.10:
• Enhance the CMake build system to check for GLib and compile/run
a subset of the regression tests (fd.o #41252, #73495; Ralf Habacker)
Fixes since 1.7.10:
• don't rely on va_copy(), use DBUS_VA_COPY() wrapper (fd.o #72840,
Ralf Habacker)
• fix compilation of systemd journal support on older systemd versions where
sd-journal.h doesn't include syslog.h (fd.o #73455, Ralf Habacker)
• fix compilation on older MSVC versions by including stdlib.h
(fd.o #73455, Ralf Habacker)
• Allow <allow_anonymous/> to appear in an included configuration file
(fd.o #73475, Matt Hoosier)
Test behaviour changes since 1.7.10:
• If the tests crash with an assertion failure, they no longer default to
blocking for a debugger to be attached. Set DBUS_BLOCK_ON_ABORT in the
environment if you want the old behaviour.
• To improve debuggability, the dbus-daemon and dbus-daemon-eavesdrop tests
can be run with an external dbus-daemon by setting
DBUS_TEST_DAEMON_ADDRESS in the environment. Test-cases that require
an unusually-configured dbus-daemon are skipped.
D-Bus 1.7.10 (2014-01-06)
==
The “weighted companion cube” release.
This is a release candidate for D-Bus 1.8.
D-Bus Specification 0.23:
• don't require messages with no INTERFACE to be dispatched
(fd.o #68597, Simon McVittie)
• document "tcp:bind=..." and "nonce-tcp:bind=..." (fd.o #72301,
Chengwei Yang)
• define "listenable" and "connectable" addresses, and discuss
the difference (fd.o #61303, Simon McVittie)
Enhancements:
• support printing Unix file descriptors in dbus-send, dbus-monitor
(fd.o #70592, Robert Ancell)
• don't install systemd units if --disable-systemd is given
(fd.o #71818, Chengwei Yang)
Fixes:
• don't leak memory on out-of-memory while listing activatable or
active services (fd.o #71526, Radoslaw Pajak)
• fix undefined behaviour in a regression test (fd.o #69924, DreamNik)
• escape Unix socket addresses correctly (fd.o #46013, Chengwei Yang)
• on SELinux systems, don't assume that SECCLASS_DBUS, DBUS__ACQUIRE_SVC
and DBUS__SEND_MSG are numerically equal to their values in the
reference policy (fd.o #88719, osmond sun)
• define PROCESS_QUERY_LIMITED_INFORMATION if missing from MinGW < 4 headers
(fd.o #71366, Matt Fischer)
• define WIN32_LEAN_AND_MEAN to avoid conflicts between winsock.h and
winsock2.h (fd.o #71405, Matt Fischer)
• do not return failure from _dbus_read_nonce() with no error set,
preventing a potential crash (fd.o #72298, Chengwei Yang)
• on BSD systems, avoid some O(1)-per-process memory and fd leaks in kqueue,
preventing test failures (fd.o #69332, fd.o #72213; Chengwei Yang)
• fix warning spam on Hurd by not trying to set SO_REUSEADDR on Unix sockets,
which doesn't do anything anyway on at least Linux and FreeBSD
(fd.o #69492, Simon McVittie)
• fix use of TCP sockets on FreeBSD and Hurd by tolerating EINVAL from
sendmsg() with SCM_CREDS (retrying with plain send()), and looking
for credentials more correctly (fd.o #69492, Simon McVittie)
• ensure that tests run with a temporary XDG_RUNTIME_DIR to avoid
getting mixed up in XDG/systemd "user sessions" (fd.o #61301,
Simon McVittie)
• refresh cached policy rules for existing connections when bus
configuration changes (fd.o #39463, Chengwei Yang)
D-Bus 1.7.8 (2013-11-01)
==
The “extreme hills” release.
Dependencies:
• If systemd support is enabled, libsystemd-journal is now required.
Enhancements:
• When activating a non-systemd service under systemd, annotate its
stdout/stderr with its bus name in the Journal. Known limitation:
because the socket is opened before forking, the process will still be
logged as if it had dbus-daemon's process ID and user ID.
(fd.o #68559, Chengwei Yang)
• Document more configuration elements in dbus-daemon(1)
(fd.o #69125, Chengwei Yang)
Fixes:
• Don't leak string arrays or fds if dbus_message_iter_get_args_valist()
unpacks them and then encounters an error (fd.o #21259, Chengwei Yang)
• If compiled with libaudit, retain CAP_AUDIT_WRITE so we can write
disallowed method calls to the audit log, fixing a regression in 1.7.6
(fd.o #49062, Colin Walters)
• path_namespace='/' in match rules incorrectly matched nothing; it
now matches everything. (fd.o #70799, Simon McVittie)
D-Bus 1.7.6 (2013-10-09)
==
The “CSI Shrewsbury” release.
Build-time configuration changes:
• Directory change notification via dnotify on Linux is no longer
supported; it hadn't compiled successfully since 2010 in any case.
If you don't have inotify (Linux) or kqueue (*BSD), you will need
to send SIGHUP to the dbus-daemon when its configuration changes.
(fd.o #33001, Chengwei Yang)
• Compiling with --disable-userdb-cache is no longer supported;
it didn't work since at least 2008, and would lead to an extremely
slow dbus-daemon even it worked. (fd.o #15589, #17133, #66947;
Chengwei Yang)
• The DBUS_DISABLE_ASSERTS CMake option didn't actually disable most
assertions. It has been renamed to DBUS_DISABLE_ASSERT to be consistent
with the Autotools build system. (fd.o #66142, Chengwei Yang)
• --with-valgrind=auto enables Valgrind instrumentation if and only if
valgrind headers are available. The default is still --with-valgrind=no.
(fd.o #56925, Simon McVittie)
Dependencies:
• Platforms with no 64-bit integer type are no longer supported.
(fd.o #65429, Simon McVittie)
• GNU make is now (documented to be) required. (fd.o #48277, Simon McVittie)
• Full test coverage no longer requires dbus-glib, although the tests do not
exercise the shared library (only a static copy) if dbus-glib is missing.
(fd.o #68852, Simon McVittie)
Enhancements:
• D-Bus Specification 0.22
· Document GetAdtAuditSessionData() and
GetConnectionSELinuxSecurityContext() (fd.o #54445, Simon)
· Fix example .service file (fd.o #66481, Chengwei Yang)
· Don't claim D-Bus is "low-latency" (lower than what?), just
give factual statements about it supporting async use
(fd.o #65141, Justin Lee)
· Document the contents of .service files, and the fact that
system services' filenames are constrained
(fd.o #66608; Simon McVittie, Chengwei Yang)
• Be thread-safe by default on all platforms, even if
dbus_threads_init_default() has not been called. For compatibility with
older libdbus, library users should continue to call
dbus_threads_init_default(): it is harmless to do so.
(fd.o #54972, Simon McVittie)
• Add GetConnectionCredentials() method (fd.o #54445, Simon)
• New API: dbus_setenv(), a simple wrapper around setenv().
Note that this is not thread-safe. (fd.o #39196, Simon)
• Add dbus-send --peer=ADDRESS (connect to a given peer-to-peer connection,
like --address=ADDRESS in previous versions) and dbus-send --bus=ADDRESS
(connect to a given bus, like dbus-monitor --address=ADDRESS).
dbus-send --address still exists for backwards compatibility,
but is no longer documented. (fd.o #48816, Andrey Mazo)
• Windows-specific:
· "dbus-daemon --nofork" is allowed on Windows again. (fd.o #68852,
Simon McVittie)
Fixes:
• Avoid an infinite busy-loop if a signal interrupts waitpid()
(fd.o #68945, Simon McVittie)
• Clean up memory for parent nodes when objects are unexported
(fd.o #60176, Thomas Fitzsimmons)
• Make dbus_connection_set_route_peer_messages(x, FALSE) behave as
documented. Previously, it assumed its second parameter was TRUE.
(fd.o #69165, Chengwei Yang)
• Escape addresses containing non-ASCII characters correctly
(fd.o #53499, Chengwei Yang)
• Document <servicedir> search order correctly (fd.o #66994, Chengwei Yang)
• Don't crash on "dbus-send --session / x.y.z" which regressed in 1.7.4.
(fd.o #65923, Chengwei Yang)
• If malloc() returns NULL in _dbus_string_init() or similar, don't free
an invalid pointer if the string is later freed (fd.o #65959, Chengwei Yang)
• If malloc() returns NULL in dbus_set_error(), don't va_end() a va_list
that was never va_start()ed (fd.o #66300, Chengwei Yang)
• fix build failure with --enable-stats (fd.o #66004, Chengwei Yang)
• fix a regression test on platforms with strict alignment (fd.o #67279,
Colin Walters)
• Avoid calling function parameters "interface" since certain Windows headers
have a namespace-polluting macro of that name (fd.o #66493, Ivan Romanov)
• Assorted Doxygen fixes (fd.o #65755, Chengwei Yang)
• Various thread-safety improvements to static variables (fd.o #68610,
Simon McVittie)
• Make "make -j check" work (fd.o #68852, Simon McVittie)
• Fix a NULL pointer dereference on an unlikely error path
(fd.o #69327, Sviatoslav Chagaev)
• Improve valgrind memory pool tracking (fd.o #69326,
Sviatoslav Chagaev)
• Don't over-allocate memory in dbus-monitor (fd.o #69329,
Sviatoslav Chagaev)
• dbus-monitor can monitor dbus-daemon < 1.5.6 again
(fd.o #66107, Chengwei Yang)
• Unix-specific:
· If accept4() fails with EINVAL, as it can on older Linux kernels
with newer glibc, try accept() instead of going into a busy-loop.
(fd.o #69026, Chengwei Yang)
· If socket() or socketpair() fails with EINVAL or EPROTOTYPE,
for instance on Hurd or older Linux with a new glibc, try without
SOCK_CLOEXEC. (fd.o #69073; Pino Toscano, Chengwei Yang)
· Fix a file descriptor leak on an error code path.
(fd.o #69182, Sviatoslav Chagaev)
· dbus-run-session: clear some unwanted environment variables
(fd.o #39196, Simon)
· dbus-run-session: compile on FreeBSD (fd.o #66197, Chengwei Yang)
· Don't fail the autolaunch test if there is no DISPLAY (fd.o #40352, Simon)
· Use dbus-launch from the builddir for testing, not the installed copy
(fd.o #37849, Chengwei Yang)
· Fix compilation if writev() is unavailable (fd.o #69409,
Vasiliy Balyasnyy)
· Remove broken support for LOCAL_CREDS credentials passing, and
document where each credential-passing scheme is used (fd.o #60340,
Simon McVittie)
· Make autogen.sh work on *BSD by not assuming GNU coreutils functionality
(fd.o #35881, #69787; Chengwei Yang)
· dbus-monitor: be portable to NetBSD (fd.o #69842, Chengwei Yang)
· dbus-launch: stop using non-portable asprintf (fd.o #37849, Simon)
· Improve error reporting from the setuid activation helper (fd.o #66728,
Chengwei Yang)
• Windows-specific:
· Remove unavailable command-line options from 'dbus-daemon --help'
(fd.o #42441, Ralf Habacker)
· Add support for looking up local TCPv4 clients' credentials on
Windows XP via the undocumented AllocateAndGetTcpExTableFromStack
function (fd.o #66060, Ralf Habacker)
· Fix insufficient dependency-tracking (fd.o #68505, Simon McVittie)
· Don't include wspiapi.h, fixing a compiler warning (fd.o #68852,
Simon McVittie)
• Internal changes:
· add DBUS_ENABLE_ASSERT, DBUS_ENABLE_CHECKS for less confusing
conditionals (fd.o #66142, Chengwei Yang)
· improve verbose-mode output (fd.o #63047, Colin Walters)
· consolidate Autotools and CMake build (fd.o #64875, Ralf Habacker)
· fix various unused variables, unusual build configurations
etc. (fd.o #65712, #65990, #66005, #66257, #69165, #69410, #70218;
Chengwei Yang, Vasiliy Balyasnyy)
D-Bus 1.7.4 (2013-06-13)
==
The “but is your thread-safety thread-safe?” release.
Security fixes:
• CVE-2013-2168: Fix misuse of va_list that could be used as a denial
of service for system services. Vulnerability reported by Alexandru Cornea.
(Simon)
Dependencies:
• The Windows version of libdbus now contains a C++ source file, used
to provide global initialization when the library is loaded.
gcc (mingw*) users should ensure that g++ is also installed.
• The libxml2-based configuration reader (which hasn't worked for 2.5 years,
and was never the recommended option) has been removed. Expat is now a
hard dependency.
Enhancements:
• It should now be safe to call dbus_threads_init_default() from any thread,
at any time. Authors of loadable modules and plugins that use libdbus
should consider doing so during initialization.
(fd.o #54972, Simon McVittie)
• Improve dbus-send documentation and command-line parsing (fd.o #65424,
Chengwei Yang)
Unix-specific:
· dbus-run-session: experimental new tool to start a temporary D-Bus
session, e.g. for regression tests or a text console, replacing
certain uses of dbus-launch which weren't really correct
(fd.o #39196, Simon)
Other fixes:
• In dbus-daemon, don't crash if a .service file starts with key=value
(fd.o #60853, Chengwei Yang)
• Unix-specific:
· Fix a crash similar to CVE-2013-2168 the first time we try to use syslog
on a platform not defining LOG_PERROR, such as Solaris or QNX.
This regressed in 1.7.0. (Simon)
· Fix an assertion failure if we try to activate systemd services before
systemd connects to the bus (fd.o #50199, Chengwei Yang)
· Avoid compiler warnings for ignoring the return from write()
(Chengwei Yang)
• Windows-specific:
· Under cmake, install runtime libraries (DLLs) into bin/ instead of lib/
so that Windows finds them (fd.o #59733, Ralf Habacker)
D-Bus 1.7.2 (2013-04-25)
==
The “only partially opaque” release.
Configuration changes:
• On non-QNX Unix platforms, the default limit on fds per message in the
session bus configuration has reduced from 4096 to 1024. The default
limit used on the system bus was already 1024. On QNX, both limits are
reduced further, to 128.
Enhancements:
• D-Bus Specification 0.21
· Following Unicode Corrigendum #9, the noncharacters U+nFFFE, U+nFFFF,
U+FDD0..U+FDEF are allowed in UTF-8 strings again. (fd.o #63072,
Simon McVittie)
Fixes:
• Diagnose incorrect use of dbus_connection_get_data() with negative slot
(i.e. before allocating the slot) rather than returning junk
(fd.o #63127, Dan Williams)
• Fix a cmake build regression since 1.7.0 (fd.o #63682; Ralf Habacker,
Simon McVittie)
• Unix-specific:
· On Linux, link successfully with glibc 2.17 (fd.o #63166, Simon McVittie)
· Under systemd, log to syslog only, not stderr, avoiding duplication
(fd.o #61399, #39987; Colin Walters, Dagobert Michelsen)
· Under systemd, remove unnecessary dependency on syslog.socket
(fd.o #63531, Cristian Rodríguez)
· Include alloca.h for alloca() if available, fixing compilation on
Solaris 10 (fd.o #63071, Dagobert Michelsen)
· Allow use of systemd-logind without the rest of systemd
(fd.o #62585, Martin Pitt)
· When built with CMake, link to librt and use the right path for
meinproc's XSLT stylesheets (fd.o #61637, Ralf Habacker)
· Reduce the default limit on number of fds per message to 128 under
QNX, working around an arbitrary OS limit (fd.o #61176, Matt Fischer)
• Windows-specific:
· Do not claim that all bus clients have the dbus-daemon's credentials;
pick up local TCPv4 clients' credentials (process ID and security
identifier, i.e. user) using GetExtendedTcpTable() (fd.o #61787,
Ralf Habacker)
D-Bus 1.7.0 (2013-02-22)
==
The "Disingenuous Assertions" release.
This is a new development release, starting the 1.7.x branch. D-Bus 1.6
remains the recommended version for long-term-supported distributions
or the upcoming GNOME 3.8 release.
Build-time configuration changes:
• The --with-dbus-session-bus-default-address configure option is no longer
supported. Use the new --with-dbus-session-bus-connect-address and
--with-dbus-session-bus-listen-address options instead. On Windows, you
usually want them to have the same argument; on Unix, the defaults are
usually correct.
• Similarly, the DBUS_SESSION_BUS_DEFAULT_ADDRESS CMake variable is no longer
supported; use the new DBUS_SESSION_BUS_LISTEN_ADDRESS and
DBUS_SESSION_BUS_CONNECT_ADDRESS variables instead.
• cmake/cross-compile.sh has been removed. Instead, please use a
cross-toolchain file (-DCMAKE_TOOLCHAIN_FILE) as documented at
<http://www.vtk.org/Wiki/CMake_Cross_Compiling>; or use Autotools
as documented in "info automake Cross-Compilation", and set
PKG_CONFIG_PATH appropriately.
Requirements:
• Man pages now require xmlto (or either xmlto or meinproc, if using CMake).
• man2html is no longer used.
Enhancements:
• D-Bus Specification 0.20
· actually say that /org/freedesktop/DBus is the object that
implements o.fd.DBus (fd.o #51865, Colin Walters)
· various reorganisation for better clarity (fd.o #38252, Simon McVittie)
· stop claiming that all basic types work just like INT32 (strings don't!)
• The "source code" for the man pages is now Docbook XML, eliminating
the outdated duplicate copies used when building with CMake.
(fd.o #59805; Ralf Habacker, Simon McVittie)
Fixes:
• In the activation helper, when compiled for tests, do not reset the system
bus address, fixing the regression tests. (fd.o #52202, Simon)
• Fix building with Valgrind 3.8, at the cost of causing harmless warnings
with Valgrind 3.6 on some compilers (fd.o #55932, Arun Raghavan)
• Merge <servicehelper> from system-local.conf if necessary (fd.o #51560,
Krzysztof Konopko)
• Under CMake, prefer xmlto over meinproc (fd.o #59733, Ralf Habacker)
• Stop duplicating CMake's own logic to find libexpat
(fd.o #59733, Ralf Habacker)
• Don't assume CMake host and build system are the same (fd.o #59733,
Ralf Habacker)
• Avoid deprecation warnings for GLib 2.35 (fd.o #59971, Simon McVittie)
• Unix-specific:
· Check for functions in libpthread correctly, fixing compilation on
(at least) OpenBSD (fd.o #47239, Simon)
· Don't leak temporary fds pointing to /dev/null (fd.o #56927,
Michel HERMIER)
· Update sd-daemon.[ch] from systemd (fd.o #60681)
· Add partial support for QNX (fd.o #60339, fd.o #61176; Matt Fischer)
• Windows-specific:
· The default session bus listening and connecting address is now
"autolaunch:", which makes D-Bus on Windows interoperate with itself
and GDBus "out of the box". Use the configure options and cmake variables
described above if you require a different autolaunch scope.
(fd.o #38201, Simon McVittie)
· Avoid a CMake warning under Cygwin (fd.o #59401, Ralf Habacker)
• Create session.d, system.d directories under CMake (fd.o #41319,
Ralf Habacker)
Update to 1.6.18: D-Bus 1.6.18 (2013-11-01) == The “sunflower plains” release. Fixes: • path_namespace='/' in match rules incorrectly matched nothing; it now matches everything. (fd.o #70799, Simon McVittie)
Update to 1.6.16:
D-Bus 1.6.16 (2013-10-08)
==
The “Fortify Agility” release.
Fixes:
• Make dbus_connection_set_route_peer_messages(x, FALSE) behave as
documented. Previously, it assumed its second parameter was TRUE.
(fd.o #69165, Chengwei Yang)
• Fix a NULL pointer dereference on an unlikely error path
(fd.o #69327, Sviatoslav Chagaev)
• Unix-specific:
· If accept4() fails with EINVAL, as it can on older Linux kernels
with newer glibc, try accept() instead of going into a busy-loop.
(fd.o #69026, Chengwei Yang)
· If socket() or socketpair() fails with EINVAL or EPROTOTYPE,
for instance on Hurd or older Linux with a new glibc, try without
SOCK_CLOEXEC. (fd.o #69073; Pino Toscano, Chengwei Yang)
· Fix a file descriptor leak on an error code path.
(fd.o #69182, Sviatoslav Chagaev)
· Fix compilation if writev() is unavailable (fd.o #69409,
Vasiliy Balyasnyy)
Update to 1.6.14: D-Bus 1.6.14 (2013-09-05) == The “Restore Fatigue” release. Fixes: • Avoid an infinite busy-loop if a signal interrupts waitpid() (fd.o #68945, Simon McVittie) • Escape addresses containing non-ASCII characters correctly (fd.o #53499, Chengwei Yang) • If malloc() returns NULL in _dbus_string_init() or similar, don't free an invalid pointer if the string is later freed (fd.o #65959, Chengwei Yang) • If malloc() returns NULL in dbus_set_error(), don't va_end() a va_list that was never va_start()ed (fd.o #66300, Chengwei Yang) • Fix a regression test on platforms with strict alignment (fd.o #67279, Colin Walters) • Avoid calling function parameters "interface" since certain Windows headers have a namespace-polluting macro of that name (fd.o #66493, Ivan Romanov) • Make "make -j check" work (fd.o #68852, Simon McVittie)
Bump PKGREVISION of all packages which create users, to pick up change of sysutils/user_* packages.
Pullup ticket #4162 - requested by wiz
sysutils/dbus: security update
Revisions pulled up:
- sysutils/dbus/Makefile 1.60-1.61
- sysutils/dbus/distinfo 1.43-1.44
- sysutils/dbus/patches/patch-ab 1.21
---
Module Name: pkgsrc
Committed By: wiz
Date: Sun May 26 18:06:05 UTC 2013
Modified Files:
pkgsrc/sysutils/dbus: Makefile distinfo
pkgsrc/sysutils/dbus/patches: patch-ab
Log Message:
Update to 1.6.10:
D-Bus 1.6.10 (2013-04-24)
==
The “little-known facts about bananas” release.
• Following Unicode Corrigendum #9, the noncharacters U+nFFFE, U+nFFFF,
U+FDD0..U+FDEF are allowed in UTF-8 strings again.
(fd.o #63072, Simon McVittie)
• Diagnose incorrect use of dbus_connection_get_data() with negative slot
(i.e. before allocating the slot) rather than returning junk
(fd.o #63127, Dan Williams)
• In the activation helper, when compiled for tests, do not reset the system
bus address, fixing the regression tests. (fd.o #52202, Simon)
• Fix building with Valgrind 3.8, at the cost of causing harmless warnings
with Valgrind 3.6 on some compilers (fd.o #55932, Arun Raghavan)
• Don't leak temporary fds pointing to /dev/null (fd.o #56927, Michel HERMIER)
• Create session.d, system.d directories under CMake (fd.o #41319,
Ralf Habacker)
• Unix-specific:
· Include alloca.h for alloca() if available, fixing compilation on
Solaris 10 (fd.o #63071, Dagobert Michelsen)
---
Module Name: pkgsrc
Committed By: wiz
Date: Thu Jun 13 13:00:34 UTC 2013
Modified Files:
pkgsrc/sysutils/dbus: Makefile distinfo
Log Message:
Update to 1.6.12:
D-Bus 1.6.12 (2013-06-13)
==
Fixes:
• CVE-2013-2168: Fix misuse of va_list that could be used as a denial
of service for system services. Vulnerability reported by Alexandru Cornea.
(Simon)
• In dbus-daemon, don't crash if a .service file starts with key=value
(fd.o #60853, Chengwei Yang)
• Unix-specific:
· Fix an assertion failure if we try to activate systemd services before
systemd connects to the bus (fd.o #50199, Chengwei Yang)
· Avoid compiler warnings for ignoring the return from write()
(Chengwei Yang)
Update to 1.6.12:
D-Bus 1.6.12 (2013-06-13)
==
Fixes:
• CVE-2013-2168: Fix misuse of va_list that could be used as a denial
of service for system services. Vulnerability reported by Alexandru Cornea.
(Simon)
• In dbus-daemon, don't crash if a .service file starts with key=value
(fd.o #60853, Chengwei Yang)
• Unix-specific:
· Fix an assertion failure if we try to activate systemd services before
systemd connects to the bus (fd.o #50199, Chengwei Yang)
· Avoid compiler warnings for ignoring the return from write()
(Chengwei Yang)
Update to 1.6.10:
D-Bus 1.6.10 (2013-04-24)
==
The “little-known facts about bananas” release.
• Following Unicode Corrigendum #9, the noncharacters U+nFFFE, U+nFFFF,
U+FDD0..U+FDEF are allowed in UTF-8 strings again.
(fd.o #63072, Simon McVittie)
• Diagnose incorrect use of dbus_connection_get_data() with negative slot
(i.e. before allocating the slot) rather than returning junk
(fd.o #63127, Dan Williams)
• In the activation helper, when compiled for tests, do not reset the system
bus address, fixing the regression tests. (fd.o #52202, Simon)
• Fix building with Valgrind 3.8, at the cost of causing harmless warnings
with Valgrind 3.6 on some compilers (fd.o #55932, Arun Raghavan)
• Don't leak temporary fds pointing to /dev/null (fd.o #56927, Michel HERMIER)
• Create session.d, system.d directories under CMake (fd.o #41319,
Ralf Habacker)
• Unix-specific:
· Include alloca.h for alloca() if available, fixing compilation on
Solaris 10 (fd.o #63071, Dagobert Michelsen)
Fix build on OpenBSD/amd64 5.2. * librt should not be linked.
Drop superfluous PKG_DESTDIR_SUPPORT, "user-destdir" is default these days.
Update to 1.6.8:
D-Bus 1.6.8 (2012-09-28)
==
The "Fix one thing, break another" release.
• Follow up to CVE-2012-3524: The additional hardening
work to use __secure_getenv() as a followup to bug #52202
broke certain configurations of gnome-keyring. Given
the difficulty of making this work without extensive
changes to gnome-keyring, use of __secure_getenv() is
deferred.
D-Bus 1.6.6 (2012-09-28)
==
The "Clear the environment in your setuid binaries, please" release.
• CVE-2012-3524: Don't access environment variables (fd.o #52202)
Thanks to work and input from Colin Walters, Simon McVittie,
Geoffrey Thomas, and others.
• Unix-specific:
· Fix compilation on Solaris (fd.o #53286, Jonathan Perkin)
· Work around interdependent headers on OpenBSD by including sys/types.h
before each use of sys/socket.h (fd.o #54418, Brad Smith)
Fix PLIST divergence on Gentoo Linux, that has man2html in PATH. Disable detection of man2html forcibly.
_dbus_poll: Set the timeout value argument to poll to -1 whenever it is less than -1 to avoid kde4 session start hang From: Sverre Froyen Bump PKGREVISION
update to 1.6.4 this is a step of two major branches, to much to list here pkgsrc notes: -I've left out our NETBSD_ATOMIC_OPS patch because it is very invasive and gcc intrinsics are hopefully good enough -A workaround for non-standard behavior of vsnprintf has been added upstream, for HPUX as the comment says. We had a patch for __hpux||__sgi which is removed now - the sgi case should be checked.
remove repeated setting
Pullup ticket #3458 - requested by tez
sysutils/dbus security update
Revisions pulled up:
- sysutils/dbus/Makefile 1.52
- sysutils/dbus/distinfo 1.37
- sysutils/dbus/patches/patch-CVE-2011-2200 1.1
---
Module Name: pkgsrc
Committed By: tez
Date: Mon Jun 13 22:06:39 UTC 2011
Modified Files:
pkgsrc/sysutils/dbus: Makefile distinfo
Added Files:
pkgsrc/sysutils/dbus/patches: patch-CVE-2011-2200
Log Message:
Add patch for CVE-2011-2200 (SA44896) from
http://cgit.freedesktop.org/dbus/dbus/commit/?h=dbus-1.2&id=6519a1f77c61d753d4c97efd6e15630eb275336e
Add patch for CVE-2011-2200 (SA44896) from http://cgit.freedesktop.org/dbus/dbus/commit/?h=dbus-1.2&id=6519a1f77c61d753d4c97efd6e15630eb275336e
recursive bump from gettext-lib shlib bump.
Pullup ticket #3313 - requested by tron Security patch for "sysutils/dbus" Revisions pulled up: - sysutils/dbus/Makefile 1.50 - sysutils/dbus/distinfo 1.36 - sysutils/dbus/patches/patch-CVE-2010-4352-1 1.1 - sysutils/dbus/patches/patch-CVE-2010-4352-2 1.1 - sysutils/dbus/patches/patch-CVE-2010-4352-3 1.1 - sysutils/dbus/patches/patch-CVE-2010-4352-4 1.1 ------------------------------------------------------------------------- Module Name: pkgsrc Committed By: tron Date: Wed Dec 29 10:49:21 UTC 2010 Modified Files: pkgsrc/sysutils/dbus: Makefile distinfo Added Files: pkgsrc/sysutils/dbus/patches: patch-CVE-2010-4352-1 patch-CVE-2010-4352-2 patch-CVE-2010-4352-3 patch-CVE-2010-4352-4 Log Message: Add fix for vulnerability reported in CVE-2010-4352 (SA42580) taken from the "dbus" GIT repository.
Add fix for vulnerability reported in CVE-2010-4352 (SA42580) taken from the "dbus" GIT repository.
Bump revision for default options changes on DragonFly.
Exactly disable installation of init scripts. Fixes PLIST mismatch for RedHat and Slackware like distributions as reported by Aleksey Cheusov via PR#43369.
Added LICENSE information.
update to dbus-1.2.4.6permissive changes: fix CVE-2009-1189 (flaw in signature validation due to incomplete fix for CVE-2008-3834)
Only install messagebus.redhat and rc.messagebus.slackware iff on linux, plus set group on libexec/dbus-daemon-launch-helper
Set mode 4511 on libexec/dbus-daemon-launch-helper - now dhcpcd-gtk and gnome keyring manager work when everything is installed via binary packages - bump pkgrevision
Fix permissions for dbus-daemon-launch-helper, especially with user-destdir. Bump PKGREVISION.
pullup ticket #2627,#2631 - requested by wiz,he
dbus: update for security and build fix
revisions pulled up:
pkgsrc/sysutils/dbus/Makefile 1.40,1.41,1.42
pkgsrc/sysutils/dbus/distinfo 1.32,1.33
pkgsrc/sysutils/dbus/patches/patch-aa 1.10
pkgsrc/sysutils/dbus/patches/patch-ab 1.17
pkgsrc/sysutils/dbus/patches/patch-ad 1.5
Module Name: pkgsrc
Committed By: wiz
Date: Wed Jan 7 19:11:36 UTC 2009
Modified Files:
pkgsrc/sysutils/dbus: Makefile distinfo
pkgsrc/sysutils/dbus/patches: patch-aa
Added Files:
pkgsrc/sysutils/dbus/patches: patch-ad
Log Message:
Update to 1.2.4.2 on the "permissive" branch.
This addresses the security problem CVE-2008-4311. For more
details, read
http://lists.freedesktop.org/archives/dbus/2008-December/010769.html
------------------------------------------------------------------------
Module Name: pkgsrc
Committed By: he
Date: Fri Jan 9 21:47:33 UTC 2009
Modified Files:
pkgsrc/sysutils/dbus: Makefile distinfo
pkgsrc/sysutils/dbus/patches: patch-ab
Log Message:
Update from version 1.2.4.2 to version 1.2.4.2nb1.
Log Message:
Update from version 1.2.4.2 to version 1.2.4.2nb1.
Pkgsrc changes:
o Modify one of the patches with a patch reported as part of
PR#40347 to make this package build on NetBSD 4.0 and probably
earlier versions as well. Many thanks to Hasso Tepper for the
patch.
------------------------------------------------------------------------
Module Name: pkgsrc
Committed By: he
Date: Fri Jan 9 21:54:15 UTC 2009
Modified Files:
pkgsrc/sysutils/dbus: Makefile
Log Message:
Update from version 1.2.4.2nb1 to 1.2.4.2nb2.
Pkgsrc changes:
o Add BUILDLINK_TRANSFORM settings which deactivate -fPIE and -pie
in the compiler invocation. The configure script of this package
checks to see if gcc accepts those options, and uses them if it
does. However, apparently that does not mean that we universally
will be able to run the resulting executables -- on NetBSD/4.0
macppc the run-time linker says
"Unsupported relocation type 6 in non-PLT relocations"
Tested that the dbus-daemon executable remains runnable on both i386
and that it is so now on macppc.
Thanks to jmcneill@ and joerg@ for hints leading to this fix.
Update from version 1.2.4.2nb1 to 1.2.4.2nb2.
Pkgsrc changes:
o Add BUILDLINK_TRANSFORM settings which deactivate -fPIE and -pie
in the compiler invocation. The configure script of this package
checks to see if gcc accepts those options, and uses them if it
does. However, apparently that does not mean that we universally
will be able to run the resulting executables -- on NetBSD/4.0
macppc the run-time linker says
"Unsupported relocation type 6 in non-PLT relocations"
Tested that the dbus-daemon executable remains runnable on both i386
and that it is so now on macppc.
Thanks to jmcneill@ and joerg@ for hints leading to this fix.
Update from version 1.2.4.2 to version 1.2.4.2nb1. Pkgsrc changes: o Modify one of the patches with a patch reported as part of PR#40347 to make this package build on NetBSD 4.0 and probably earlier versions as well. Many thanks to Hasso Tepper for the patch.
Update to 1.2.4.2 on the "permissive" branch. This addresses the security problem CVE-2008-4311. For more details, read http://lists.freedesktop.org/archives/dbus/2008-December/010769.html
Make dbus really work on DragonFly and FreeBSD. The patch obtained from FreeBSD ports. Bump PKGREVISION.
Restore socket credentials fix that was lost 5 months ago, bump PKGREVISION and STOP BREAKING DBUS.
Avoid compiling in example directory path into executables. Noted by jmcneill. Bump PKGREVISION.
Don't use -Wl,--gc-sections as it strips .note.netbsd.* sections. Bump pkg revision.
on darwin configure script picks up private per-user tmp directory in /var/folders/xx/...+++... via the TMPDIR environment and cheerfully installs it in /usr/pkg/etc/dbus-1/session.conf meaning that only the user who installed the package will be able to write to that directory... except that dbus rejects directories with "+"'s in the filename so it won't work anyway. use configure --with-session-socket-dir=/tmp to work around this. found a description of this issue here: http://wiki.gnucash.org/wiki/MacOSX/Quartz in the "Running from the commandline" section. dbus also cannot cope with $DISPLAY containing "/" chars (like in darwin ... /tmp/launch-kcvznx/:0 ) so get rid of the ":" as described here: https://trac.macports.org/attachment/ticket/16833/patch-dbus-launch-x11.c.diff
pullup ticket #2554 - requested by tron
dbus: update package for security fix
revisions pulled up:
pkgsrc/sysutils/dbus/Makefile 1.33, 1.34
pkgsrc/sysutils/dbus/files/dbus.sh 1.9
pkgsrc/sysutils/dbus/distinfo 1.27
pkgsrc/sysutils/dbus/patches/patch-ab 1.14
Modified Files:
pkgsrc/sysutils/dbus: Makefile
pkgsrc/sysutils/dbus/files: dbus.sh
Log Message:
When removing a loop, remove both the beginning _and_ the end.
Bump PKGREVISION. Noted by Cem Kayali in pkgsrc-users@
------------------------------------------------------------------------
Module Name: pkgsrc
Committed By: tron
Date: Sun Oct 12 11:15:22 UTC 2008
Modified Files:
pkgsrc/sysutils/dbus: Makefile distinfo
pkgsrc/sysutils/dbus/patches: patch-ab
Log Message:
Update "dbus" package to version 1.2.4. Changes since 1.2.3:
- Security fix for CVE-2008-3834
- A small number of compilation and portability fixes
Update "dbus" package to version 1.2.4. Changes since 1.2.3: - Security fix for CVE-2008-3834 - A small number of compilation and portability fixes
When removing a loop, remove both the beginning _and_ the end. Bump PKGREVISION. Noted by Cem Kayali in pkgsrc-users@
Some maintainous to dbus pacakge, approved by agc@.
* Change "${VARBASE}/lib/dbus" to "${VARBASE}/db/dbus".
* Create "${VARBASE}/db/dbus" with OWN_DIRS_PERMS at install time.
* Generate "${VARBASE}/db/dbus/machine-id" file at install time.
* Install dbus-daemon-launch-helper with mode 04550 instead of 04750.
It solves start gimp successfully without running dbus-daemon as before.
Bump PKGREVISION.
Update to 1.2.3:
1.2.3:
* New UpdateActivationEnvironment bus API (#16669)
* Solaris Auditing (ADT) support (#15740)
* Various notable bug fixes: #16727, #16294, #15947 #15588
* Other more minor bugs
- Fix support for NetBSD's atomic ops. - Fix up some inconsistent handing of CONFIGURE_ARGS (mostly related to the debug option). - Add test target (commented out, see Makefile). - Add some patches from freedesktop.org git (see comments atop new patches). - Remove trailing comma from an enum in tools/dbus-monitor.c. Passes all tests on NetBSD/amd64 4.99.65, save for spawn test, which seems to hang (?). I'm also running GNOME now and everything seems to be in order.
update to 1.2.1, mostly from Blair Sadewitz There is some stuff in the pkg which is not completed or doesn't work yet, as support for NetBSD's new atomic increment ops, but this is not essential. It is a good moment to do the update right now because gtk2 was just updated, and there is just enough time before the next branch. This is a major update, too many changes to list here.
Drop maintainership Stop lying and drop maintainership of these packages. I have not maintained them for a very long time already, so leave room for fresh blood to take over them.
add a patch from upstream to fix a possible security bypass (CVE-2008-0595), bump PKGREVISION
Add patch supporting socket credentials for NetBSD, courtesy of jmcneill@. Bump rev.
Actually, better bump PKGREVISION since I know at least two pkgsrc/HPUX users that will benefit from the vsnprintf fix.
Make it easier to build and install packages "unprivileged", where
the owner of all installed files is a non-root user. This change
affects most packages that require special users or groups by making
them use the specified unprivileged user and group instead.
(1) Add two new variables PKG_GROUPS_VARS and PKG_USERS_VARS to
unprivileged.mk. These two variables are lists of other bmake
variables that define package-specific users and groups. Packages
that have user-settable variables for users and groups, e.g. apache
and APACHE_{USER,GROUP}, courier-mta and COURIER_{USER,GROUP},
etc., should list these variables in PKG_USERS_VARS and PKG_GROUPS_VARS
so that unprivileged.mk can know to set them to ${UNPRIVILEGED_USER}
and ${UNPRIVILEGED_GROUP}.
(2) Modify packages to use PKG_GROUPS_VARS and PKG_USERS_VARS.
Bump pkgrevision after changing the default for DBUS_USER (to make the name short enough to be more portable). As near as I can tell, no other pkgs actually care about what this username is.
Fix build with X11_TYPE=modular
Pullup ticket 1967 - requested by drochner security fix for dbus - pkgsrc/sysutils/dbus/Makefile patch - pkgsrc/sysutils/dbus/distinfo patch - pkgsrc/sysutils/dbus/patches/patch-ba patch Apply security patch from dbus 1.0.2 to dbus 0.92 to fix CVE-2006-6107.
Fix installation under RedHat and Slackware by always installing all possible start-up scripts. This also makes all installations consistent regardless of the underlying OS. Bump PKGREVISION to 1.
update to 1.0.2 changes: -Fix bug where calling dbus_threads_init_default would assert -Fix UUID output to match the spec -Clear up documentation on UUIDs -Fix security bug CVE-2006-6107 match rules can be removed by apps that did not create them -pthread fix pkgsrc changes: -create /var/lib/dbus on startup -build against X11 to get the automatic startup of the session bus (can be switched off per pkgsrc option)
Make the dbus user and group configurable, because (at least on NetBSD) the defaults messagebus:messagebus trigger daily security warnings (more than 8 characters). The default values are set in mk/defaults/mk.conf but kept the same for backwards compatibility, so no PKGREVISION bump.
update to 1.0.0 This is the first formal stable release; there were some fixes since 0.92, cleanup and documentation update. The protocol is now considered stable.
${DOCDIR} needs to be prefixed with DESTDIR as well.
DESTDIR support.
Every package should provide at least _some_ documentation. PKGREVISION++
Update to 0.92: - Add support for LOCAL_CREDS socket credentials so that we can connect to the system daemon under NetBSD. It was useless before... Changes since 0.91: - Proper thread locking added to pending calls - Threading semantics changed from init early to init before the second thread is started - Correctly error out when an application tries to acquire or release the org.freedesktop.DBus name instead of sending false result codes - kqueue directory watching code can now be used to monitor config file changes on FreeBSD - --with-dbus-daemondir configure switch added so the daemon can be installed separate from the user binaries - Makefiles fixed for cygwin - Various fixes for the ongoing Windows port - Fixed docs and comments to use the D-Bus spelling instead of D-BUS - Many memleaks and bugs fixed
Update to 0.91:
D-Bus 0.91 (24 July 2006)
==
- Remove some lingering bits left over from the bindings split
- Fix assertion causing D-Bus applications to crash when checks are enabled
- Fix a timeout bug which would block applications from being auto started
D-Bus 0.90 (17 July 2006)
==
- API/ABI freeze for 1.0
- Bindings are now split out into seperate packages
- ListActivatableNames added as a method on the bus
- Removed deprecated dbus_connection_disconnect (use dbus_connection_close)
- Shared connections are now unreffed on disconnect
- Fixed pending calls for threaded enviornments
- Pending calls get timed out on connection disconnect
- dbus_connection_send_with_reply returns TRUE and a NULL pending call
if you call it on a connection object which has been disconnected already
(it returns FALSE on Out of Memory errors only)
- dbus-monitor now correctly catches methods, not just signals
- dbus-monitor now prints object paths
D-BUS 0.62 (12 June 2006)
==
- Doc fixes
- Added support for all data-types for the dbus tools
- Fixed eavesdropping on method calls (dbus-monitor)
- Fixed silent dropping of method calls with interface=NULL
- Fixed console ownership problems in Solaris
- Fixed installation of dbus-signature.h and #include it in dbus/dbus.h
- Flush the user database cache on config reload
- GLib bindings:
- Fix memory leaks
- Fix properties in DBusGProxy so that they can be given in any
order
- Added lots of assertions to ensure correct use
- Remove duplicated code
- Fix static string pointer uses in GPtrArray-based collections
- Python bindings:
- Remove reference to sys/cdefs.h
- Qt4 bindings:
- Code reorganized
- Added the dbusidl2cpp, dbuscpp2xml and dbus tools
- Added example programs (ping-pong, complex ping-pong, listnames, chat)
- Updated selftests
- Fixed compilation and .moc- and .ui-file processing and cleaning
- Made central classes derive from QObject
- Enhance error reporting
- Many bugfixes
- Mono bindings:
- Minor bugfixes
Modify packages that set PKG_USERS and PKG_GROUPS to follow the new syntax as specified in pkgsrc/mk/install/bsd.pkginstall.mk:1.47.
Build the convenience library as -static, otherwise binutils generates incorrect relocation entries for errno on DragonFly. Bump revision.
Doesn't build without gettext.
Update dbus and dbus-glib to 0.61:
D-BUS 0.61 (24 Febuary 2006)
==
- Documentation all around
- dbus-launch now produces correct sh and csh syntax
- Nested arrays now work correctly
- GLib bindings:
- Inheriting from DBusGProxy is now possible
- GPtrArrays can now be marshalled
- org.freedesktop.DBus.GLib.ClientCSymbol annotation added
- Openning connections to arbitrary addresses now supported
- Python bindings:
- sender_keyword and path_keyword keywords added to signal listener API
- Byte types now demarshal to unsigned char
- calling methods now do the correct thing
- Qt bindings:
- both Qt3 and Qt4 bindings can be built at the same time
- Use the standard org.freedesktop.DBus.Method.NoReply annotation
for the "async" calls instead of creating one for us.
- Mono bindings:
- 64bit arch fixes
- Massive bug fixing all around
D-BUS 0.60 (30 November 2005)
==
- major ABI/API changes - sonames changed
- RequestName queuing behavior has changed (refer to dbus-specification)
- DBUS_NAME_FLAG_PROHIBIT_REPLACEMENT has been removed and
DBUS_NAME_FLAG_ALLOW_REPLACEMENT has been added to the flags
- signals emitted by the bus now show up in the introspect data
- auth EXTERNAL now supported on BSD varients
- ReleaseName method added to the bus to allow a service
to remove itself as owner of a bus name
- dbus_connection_read_write added for getting messages off the bus
in the absence of a mainloop
- Qt4 bindings added and the Qt3 bindings have been depricated
- python bindings:
- marshal using introspect data if available
- better exception handling and propigation
- private connections are now supported
- UTF-8 cleanups
- out_signature added to method decorators for specifying
how the return values should be marshaled
- sender_keyword added to method decorators for specifying
and argument to provide the unique name of the method caller
- async_callbacks added to method decorators
- multiple inheritance of classes now supported
- GLib bindings:
- respect NoReply annotations
- dbus_g_method_return_get_reply and dbus_g_method_return_send_reply
added to the lowlevel code for use when the dbus-glib marshalling
code is not adiquate
- numerous bug fixes all around
D-BUS 0.50 (06 September 2005)
===
This is a minor release from 0.36.2. The series number has changed
not because of any technical reasons but as an indication that we
are moving closer to 1.0. It is hoped that this will be the last
series to see major changes, most of which will be isolated to the
GLib and Python bindings, as we transition to concentrate more on
bug busting and code auditing.
- D-Bus builds on the Cygwin platform
- Makefile cleanups
- Various bug fixes
- Optimization of the dbus object tree
- Memleaks and GIL crasher bugs have been fixed in the Python bindings
D-BUS 0.36.2 (29 August 2005)
===
- Security: Restrict other users from connecting to another users
session bus
D-BUS 0.36.1 (24 August 2005)
===
- Python Bindings:
- fixed to work with hal-device-manager
- For 64bit builds everything is installed to lib64/python2.4/
since Python can't handle multilib
D-BUS 0.36 (23 August 2005)
===
- Maximum sized of cached messages have been reduced to 10K
- Match rules now allow matching on arguments inside the message
- introspect.xsl XSLT style sheet added for formatting introspection
data into XHTML for analysis
- Python bindings:
- now have working type objects for explicit
typecasting
- Variant type has been added
- Dictionaries, Variants and Arrays can all be passed the signiture or
type(s) of their children
- the optional timeout= keyword has been added when making method calls
- match on args has been implemented
- a .pth file has been added for dealing with libraries and python files
being in different directories such as in 64bit installs
- various bug fixes
- GLib bindings:
- deeply recursive types now supported
- many symbols are no longer exported as part of the public API
- various memleak and other bug fixes
D-BUS 0.35.2 (17 July 2005)
===
- Rename Unix Security Context to SELinux Security Context in API
- Fixed more dist errors that distcheck didn't pick up on
- Fixed various bugs in the python bindings that prevented them from working
D-BUS 0.35.1 (16 July 2005)
===
- Fixed dist error where python/dbus_bindings.pxd was being shipped
instead of dbus_bindings.pxd.in
- Use this instead of the 0.35 tarball
D-BUS 0.35 (15 July 2005)
===
- --with-dbus-user added to the configure scripts for configuring the
user the system bus runs on
- --with-console-auth-dir added to configure scripts for configuring the
directory to look in for console user locks
- service files for auto-starting D-Bus services now has the ability to pass
in command line arguments to the executable
- Huge auto-start bug squashed which caused some services not to start when
requested in rapid succession
- SE-Linux security contexts can now be appended to messages for inspection
by services that enforce their own security policies
- Colin says the GLib binding are ready for general consumption
- New GLib tutorial
- New GLib example code
- Python bindings are now version (0,42,0)
- Python bindings API has changed on the service side
- dbus.service has been split out as a seperate module
- dbus.service.Service is renamed to dbus.service.BusName
- dbus.service.Object has swapped the bus_name and object_path constructor
parameters to make it easier to do inheritance over the bus
- dbus.glib has been seperated out in order to lessen the dependency on glib
and to allow other mainloops to be integrated with the bindings including
a planned generic mainloop for non-gui apps.
- Python bindings now aquire the GIL when calling back into the python
interpreter. Fixes crashes when using threading and other random segfaults.
- New Python tutorial
- Numerous D-Bus bug fixes all around
D-BUS 0.34 (15 June 2005)
===
- dbus_connection_disconnect is deprecated in favor of dbus_connection_close
- The bus can now use D_NOTIFY (if available) to check when configuration files
have changed and reload them
- New dbus_message_has_path/member/interface API added
- The Ping message from the org.freedesktop.DBus.Peer interface is now handled
- Complete glib bindings overhaul (and are still under construction)
- Tutorial now has an updated GLib section
- GLib bindings can now send/receive hash tables, arrays and other complex types
- Python bindings overhaul (most public facing API's done)
- Python bindings have been split up into separate files
- Python added new type classes for hinting to the marshaler what type
to send over the wire
- Python bindings now have decorators for specifying exported methods and signals
- Numerous bug fixes
D-BUS 0.33 (25 Apr 2005)
===
- downgrade requirement from GTK+-2.6 to 2.4 for building gtk components
- python binding API's have been overhalled to be more "pythonic" and cleaner
- python bindings now export dbus.version which is set to (0,40,0)
- python bindings now implement the org.freedesktop.DBus.Introspectable interface
- python binding match rules are now more flexable
- make check has been fixed
- many, many major bug fixes
D-BUS 0.32 (29 Mar 2005)
===
- mono bindings now compiles correctly
- mono binding cleanups
- glib bindings generates wrappers for bus methods in dbus-glib-bindings.h
- glib binding cleanus
- users and groups can now be specified by UID and GID in config files
- numerous memory leak fixes
- various other fixes
D-BUS 0.31 (07 Mar 2005)
===
- land the new message args API and recursive type system
- add docs and fixed Doxygen warnings throught source
- split out some functions not needed in libdbus to *-util.c source files
- take out type convienience functions
- libdbus now back below 150K
- booleans are now 32-bit instead of 8-bit
- specification updated
- grand renaming to strip out the use of "service"
just say "name" instead (or "bus name" when ambiguous)
- rename dbus-daemon-1 to dbus-daemon throughout
- rename activation to auto-start
- auto-start on by default now
- note that libdbus is the low-level API
- python bindings updated to the new API
- mono bindings updated to the new API
- add 16 bit types
- dictionaries are now ARRAYS of DICT_ENTRY
- dbus-glib-tool renamed to dbus-binding-tool
- massive rewrite of the glib bindings
- saner names for the dbus interface, object path and service defines
- new functions for handling type signitures
- bump sonames for libdbus and libdbus-glib
- various small fixes
Recursive revision bump / recommended bump for gettext ABI change.
Bump BUILDLINK_RECOMMENDED of textproc/expat to 2.0.0 because of the shlib major bump. PKGREVISION++ for the dependencies.
The real user name in PKG_USERS does not need to be escaped with double backslashes anymore. A single backslash is enough. Changed the definition in all affected packages. For those that are not caught, an additional check is placed into bsd.pkginstall.mk.
Pullup ticket 594 - requested by grant beattie
kill some hardcoded instances of /sbin/nologin
Revisions pulled up:
- pkgsrc/mail/exim/Makefile 1.58
- pkgsrc/mail/exim3/Makefile 1.20
- pkgsrc/chat/ircd-hybrid/Makefile 1.17
- pkgsrc/net/openntpd/Makefile 1.13
- pkgsrc/security/pflkm/Makefile 1.9
- pkgsrc/sysutils/dbus/Makefile 1.5
Module Name: pkgsrc
Committed By: grant
Date: Tue Jul 12 04:07:41 UTC 2005
Modified Files:
pkgsrc/mail/exim: Makefile
pkgsrc/mail/exim3: Makefile
Log Message:
use ${NOLOGIN}, not hardcoded /sbin/nologin. fixes install on Solaris
and others.
----
Module Name: pkgsrc
Committed By: grant
Date: Tue Jul 12 04:15:50 UTC 2005
Modified Files:
pkgsrc/chat/ircd-hybrid: Makefile
pkgsrc/net/openntpd: Makefile
pkgsrc/security/pflkm: Makefile
pkgsrc/sysutils/dbus: Makefile
Log Message:
use ${NOLOGIN}, not hardcoded /sbin/nologin.
use ${NOLOGIN}, not hardcoded /sbin/nologin.
Update dbus and dbus-glib to 0.23.4: D-BUS 0.23.4 (11 Mar 2005) === - fix a failed assertion when trying to get replies from certain pending calls D-BUS 0.23.3 (9 Mar 2005) === - add back dbus_pending_call_get_reply() which was removed accidentally. - fix a memory leak in return messages - fix many memory leaks and lifecycle issues in the mono bindings. D-BUS 0.23.2 (18 Feb 2005) === - shuffle some code around in the mono bindings to deterministically finalize classes so that delegates are unregistered correctly. - backport a bunch of thread locking-related fixes from HEAD. D-BUS 0.23.1 (11 Feb 2005) === - fix a bug in which the bus daemon wouldn't recognize that a service owner quit - fix a bug in the mono bindings that would cause unmanaged code to call back into a delegate that had been garbage collected and crashed. D-BUS 0.23 (11 Jan 2005) === - add setgroups() to drop supplementary groups - updated SELinux support - add an "at console" security policy - fix a bug where org.freedesktop.DBus wasn't recognized as an existing service. - error out if --enable-mono is explicitly set and mono libs can't be found - set the max_match_rules_per_connection limit from the config file. - removed dbus_bug_get_with_g_main since it's been replaced by dbus_g_bus_get - fix fd leaks in socket code - lots and lots of mono binding updates, including fixes to make it compatible with Mono 1.1.3 - added --nofork option to override config file setting at runtime - added support for int64 and uint64 to the python bindings - lots of python binding updates - config file DTD updates - use SerivceOwnerChanges signal instead of ServiceCreated and ServiceDeleted - fixes to the authentication code - new init script for Slackware - print out the pid even when --fork is passed - increase preallocation sizes in DBusMessage to heavily reduce reallocs - lots of performance enhancements - lots more small bug fixes
The default location of the pkgsrc-installed rc.d scripts is now under share/examples/rc.d. The variable name already was named RCD_SCRIPTS_EXAMPLEDIR. This is from ideas from Greg Woods and others. Also bumped PKGREVISION for all packages using RCD_SCRIPTS mechanism (as requested by wiz).
Recreate the VARBASE/run/dbus directory before starting the daemon, in case it does not exist; this directory is removed at boot time by another script. Also, don't bother to create it with an OWN_DIRS_PERMS line, because the rc.d script will do it for us. Bump PKGREVISION to 1.
Initial import of dbus, version 0.22: D-BUS is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. D-BUS supports broadcast messages, asynchronous messages (thus decreasing latency), authentication, and more. It is designed to be low-overhead; messages are sent using a binary protocol, not using XML. D-BUS also supports a method call mapping for its messages, but it is not required; this makes using the system quite simple. This package provides the D-BUS core library and daemon, as well as some utilities that complement it.
Initial revision