Up to [cvs.NetBSD.org] / pkgsrc / sysutils / apcupsd
Request diff between arbitrary revisions
Keyword substitution: kv
Default branch: MAIN
sysutils/apcupsd: fix location of HTML documentation
Sort PLIST files. Unsorted entries in PLIST files have generated a pkglint warning for at least 12 years. Somewhat more recently, pkglint has learned to sort PLIST files automatically. Since pkglint 5.4.23, the sorting is only done in obvious, simple cases. These have been applied by running: pkglint -Cnone,PLIST -Wnone,plist-sort -r -F
Update apcupsd to 3.14 branch revision r2365
3.14.14 was tagged but not released, 3.14.13 is the last release, hence
apcupsd-3.14.13r2365.
- Remove use of BSD USB driver; all platforms except Linux use generic-usb now
- i18n support removed
3.14.14 -- 30 May 2015
BUG FIXES
* win32: Fix missing DLLs when installing only apctray
* Fixes for socket error handling. Resolves apcaccess crash when connection
fails as well as several other theoretical issues.
* MODBUS/USB error handling (COMMLOST) improvements for faulty USB links
* Fix hiddev binding when usbfs is mounted on /dev/bus/usb instead of
/proc/bus/usb. This is necessary for switching between MODBUS/USB and
USB/HID on Linux.
* Update GPLv2 text and FSF address to match current versions from FSF.
* Various fixes for potential issues suggested by Coverity Scan
3.14.13 -- 02 February 2015
NEW FEATURES
* MODBUS USB support
Previous releases supported MODBUS serial (RS232). This release adds
support for MODBUS over USB. This protocol is preferable to the normal
USB HID driver because it offers access to more UPS data readouts and
controls. The only configuration file change needed versus MODBUS serial
is to change UPSCABLE to usb and use an empty DEVICE setting. See the
MODBUS section of the apcupsd manual for more details.
* Support for Apple Notification Center on Mac OS X (replaces Growl)
* Apple install packages and binaries are signed with an Apple Developer
key for compatibility with Gate Keeper
* Windows USB driver has been updated with additional USB identifiers to
support future APC products.
BUG FIXES
* Use launchd for startup on Mac OS X as the old Startup Items mechanism is
no longer supported in 10.10 and above
* Fix apcaccess on ARM systems where char is unsigned by default
* Fix several potential issues identified by Coverity static analysis
* Numerous other fixes and improvements all over the code, many of them
submitted by users...Thank you!
MISC
* Windows port now builds with the same configure and make system as the
other targets, no need to maintain a special hardcoded Makefile.
* Many cleanups to the Windows port codebase
* Prebuilt binaries for Mac OS X no longer support PowerPC systems or
Mac OS X 10.4 and older
3.14.12 -- 29 March 2014 (Maintenance Release)
NEW FEATURES
* apcaccess and apcupsd status format updates to ease parsing by scripts
* UPS name is included in subject line of emails in default scripts
* Default event scripts pull SYSADMIN and APCUPSD_MAIL definitions from a
common config file so they can easily be configured in one place
BUG FIXES
* Fix issue with certain Back-UPS USB models repeatedly cycling power on/off
after killpower is issued
* Fix display of battery level during MODBUS calibration
* Fix apctest EEPROM setting on various models
* Close and reopen serial port during extended COMMLOST in apcsmart driver
(helps recover connection when USB serial port dongles are reconnected)
* Avoid probing non-APC USB devices as it can cause lockups
* Fix issue with service failing to start on Windows during boot with USB UPS
* Fix bogus lock file error when config file error forces early termination
* Fix MODBUS NOMOUTV reading for voltages other than 120VAC
* Fix LOADPCT (CI_LOAD) on MODBUS driver
* Fix issue with net driver not reporting MODEL value
3.14.11 -- 31 January 2014 (Maintenance Release)
NEW FEATURES
* MODBUS protocol support
Over the summer, APC publicly released documentation[1] on a new UPS
control and monitoring protocol, loosely referred to as MODBUS (after the
historic industrial control protocol it is based on). The new protocol
operates over RS232 serial lines as well as USB connections and is intended
to supplement APC's proprietary Microlink protocol. Microlink is not going
away, but APC has realized that third parties require access to UPS status
and control information. Rather than publicly open Microlink, they have
created another protocol to operate along side it.
Many existing Microlink UPSes can be upgraded to support MODBUS via a
firmware update. See [2]. Certain older models are not upgradeable. APC
support will be your best contact for determining if your UPS supports a
MODBUS upgrade the information linked below does not make it clear.
For now, apcupsd supports MODBUS over RS232 serial only. It DOES NOT yet
support MODBUS over USB. See the apcupsd manual[3] for information on
setting up apcupsd.conf for MODBUS UPSes.
[1] http://www.apc.com/whitepaper/?an=176
[2] http://www.schneider-electric.us/support/index?page=content&country=ITB&lang=EN&id=FA164737
[3] http://www.apcupsd.com/manual/manual.html
* Windows USB driver is now digitally signed thanks to Jernej Simoncic
<jernej's-sflist@eternallybored.org>
3.14.10 -- 13 September 2011 (Maintenance Release)
BUG FIXES
* Fix missing status and spurrious incorrect status on newer BackUPS CS
models using USB interface.
* USB compatibility fixes for Mac OS X Lion
* USB driver support for newer Microlink models on Mac OS X Lion and Windows
* Ignore transitions to battery due to calibration (possible if user
initiates calibration, then exits apctest and starts apcupsd before
calibration completes.
* Fix truncation of long UPS model names such as "Smart-UPS RT 5000 XL"
* Fix MODEL vs. APCMODEL confusion. Remove APCMODEL and rename old MODEL
aka 'mode' to DRIVER.
Remove example rc.d scripts from PLISTs. These are now handled dynamically if INIT_SYSTEM is set to "rc.d", or ignored otherwise.
Actually install the manual (manual.html), but don't install WML-formatted docs.
PR/38104 - remove conflict with nut: rename upsimage.cgi to apcupsimage.cgi OK by maintainer.
Pullup ticket #3493 - requested by bouyer
sysutils/apcupsd: build fix
Revisions pulled up:
- sysutils/apcupsd/Makefile 1.62
- sysutils/apcupsd/PLIST 1.13
- sysutils/apcupsd/distinfo 1.15
- sysutils/apcupsd/options.mk 1.3
- sysutils/apcupsd/patches/patch-aa deleted
- sysutils/apcupsd/patches/patch-ae 1.7
- sysutils/apcupsd/patches/patch-af 1.7
- sysutils/apcupsd/patches/patch-ag 1.5
- sysutils/apcupsd/patches/patch-ai 1.5
- sysutils/apcupsd/patches/patch-aj 1.8
- sysutils/apcupsd/patches/patch-al 1.5
- sysutils/apcupsd/patches/patch-an 1.6
- sysutils/apcupsd/patches/patch-ao 1.7
---
Module Name: pkgsrc
Committed By: bouyer
Date: Mon Aug 1 14:54:51 UTC 2011
Modified Files:
pkgsrc/sysutils/apcupsd: Makefile PLIST distinfo options.mk
pkgsrc/sysutils/apcupsd/patches: patch-ae patch-af patch-ag patch-ai
patch-aj patch-al patch-an patch-ao
Removed Files:
pkgsrc/sysutils/apcupsd/patches: patch-aa
Log Message:
Update to 3.14.9.
Dragonfly users, please test that is still builds !
pkgsrc change: as snmp support doesn't depend on net-snmp
anymore, remove snmp option and always build snmp support.
cgi option now depend on graphics/gd/
User-visible changes sinces 3.14.3:
2010-08-30 14:18 adk0212
* src/drivers/snmplite/: mge-mib.cpp, mge-oids.h, mibs.cpp:
Add support for MGE SNMP MIB. Contributed by Lars Täer
<taeuber@bbaw.de>
2010-07-30 18:04 adk0212
* src/drivers/snmplite/: apc-mib.cpp, apc-oids.h, mib.cpp, oids.h,
rfc1628-mib.cpp, rfc1628-oids.h, snmplite.cpp, snmplite.h:
Add support for RFC1628 SNMP MIB. Refactor APC MIB and create
MibStrategy struct for associating MIB/CI mapping with
corresponding processing function. RFC1628 strategy is coded per
the MIB but untested.
2010-01-10 10:29 adk0212
* include/defines.h, src/apctest.c, src/drivers/usb/usb.c:
Add apctest support for reading/setting self-test interval on USB.
Also show current setting in UPS status. Contributed by James
Belleau <jpbelleau@gmail.com>
2009-10-25 11:03 adk0212
* configure, autoconf/config.h.in, autoconf/configure.in,
autoconf/variables.mak.in, include/struct.h,
platforms/etc/apcupsd.conf.in, src/drivers/Makefile,
src/drivers/drivers.c, src/drivers/snmplite/Makefile,
src/drivers/snmplite/asn.cpp, src/drivers/snmplite/asn.h,
src/drivers/snmplite/mib.cpp, src/drivers/snmplite/snmp.cpp,
src/drivers/snmplite/snmp.h, src/drivers/snmplite/snmplite.cpp,
src/drivers/snmplite/snmplite.h, src/lib/apcconfig.c,
src/lib/apcstatus.c:
Add SNMP Lite driver which does not depend on net-snmp library.
This makes it more portable and eliminates need to move libsnmp.so
to /lib in order to do a killpower on systems where /usr is
unmounted.
2009-09-01 20:30 adk0212
* src/apctest.c:
Implement battery calibration in apctest for USB models. Thanks to
James Belleau <james@belleau.net> for the original implementation
which has been modified somewhat in this commit.
2009-05-02 10:30 adk0212
* src/action.c:
Change log level of UPS self-test messages to WARNING from ALERT.
Given that self-test messages are routine, they do not belong at
LOG_ALERT. Contributed by Dave Ewart <davee@ceu.ox.ac.uk>.
2009-04-25 10:58 adk0212
* src/lib/apcconfig.c:
Remove EVENTFILE, EVENTFILEMAX config directives. These were
replaced by the plural versions that are in use today (EVENTSFILE,
EVENTSFILEMAX) almost 10 years ago. It's time to kill the old
names. (h/t Trevor Roydhouse <trev@sentry.org>)
2009-03-02 17:48 adk0212
* doc/apcupsd.man, include/drivers.h, include/extern.h,
src/action.c, src/apctest.c, src/apcupsd.c, src/device.c,
src/options.c, src/drivers/drivers.c,
src/drivers/apcsmart/apcsmart.h, src/drivers/apcsmart/smart.c,
src/drivers/apcsmart/smartoper.c, src/drivers/usb/usb.c,
src/drivers/usb/usb.h, src/lib/apclock.c:
Add support for turning the UPS off completely. This complements
existing hibernate (aka killpower) functionality. Turn-off is
implemented for apcsmart and USB drivers, subject to support for
the relevant commands in the UPS itself. Contributed by Keith
Campbell <campbell@econnectix.com>.
2008-06-29 11:12 adk0212
* src/action.c:
Fix bug in LOWBATT glitch handling. We must examine LOWBATT for
changes every time thru the status loop, not just during the
OnBattery state. Otherwise we can miss the initial LOWBATT
assertion, which defeats the glitch rejection logic.
2008-05-06 20:16 skoona
* src/gapcmon/gapcmon.c:
Corrected the use of NOMPOWER and the calc of current usage amount
2008-05-04 11:13 adk0212
* src/drivers/usb/usb.c:
Add a heuristic to fix up incorrect NOMINV or NOMOUTV. Some UPSes
(RS 500) report decivolts instead of volts. Reported by Kirill S.
Bychkov <yason@linklevel.net>.
2008-01-27 12:00 adk0212
* include/struct.h, platforms/etc/apcupsd.conf.in,
platforms/mingw/apcupsd.conf.in, src/device.c,
src/drivers/net/net.c, src/drivers/snmp/drv_powernet.c,
src/lib/apcconfig.c:
Add POLLTIME directive to control UPS polling interval. NETTIME is
accepted as a synonym for compatibility with old config files.
Update to 3.14.9.
Dragonfly users, please test that is still builds !
pkgsrc change: as snmp support doesn't depend on net-snmp
anymore, remove snmp option and always build snmp support.
cgi option now depend on graphics/gd/
User-visible changes sinces 3.14.3:
2010-08-30 14:18 adk0212
* src/drivers/snmplite/: mge-mib.cpp, mge-oids.h, mibs.cpp:
Add support for MGE SNMP MIB. Contributed by Lars Täer
<taeuber@bbaw.de>
2010-07-30 18:04 adk0212
* src/drivers/snmplite/: apc-mib.cpp, apc-oids.h, mib.cpp, oids.h,
rfc1628-mib.cpp, rfc1628-oids.h, snmplite.cpp, snmplite.h:
Add support for RFC1628 SNMP MIB. Refactor APC MIB and create
MibStrategy struct for associating MIB/CI mapping with
corresponding processing function. RFC1628 strategy is coded per
the MIB but untested.
2010-01-10 10:29 adk0212
* include/defines.h, src/apctest.c, src/drivers/usb/usb.c:
Add apctest support for reading/setting self-test interval on USB.
Also show current setting in UPS status. Contributed by James
Belleau <jpbelleau@gmail.com>
2009-10-25 11:03 adk0212
* configure, autoconf/config.h.in, autoconf/configure.in,
autoconf/variables.mak.in, include/struct.h,
platforms/etc/apcupsd.conf.in, src/drivers/Makefile,
src/drivers/drivers.c, src/drivers/snmplite/Makefile,
src/drivers/snmplite/asn.cpp, src/drivers/snmplite/asn.h,
src/drivers/snmplite/mib.cpp, src/drivers/snmplite/snmp.cpp,
src/drivers/snmplite/snmp.h, src/drivers/snmplite/snmplite.cpp,
src/drivers/snmplite/snmplite.h, src/lib/apcconfig.c,
src/lib/apcstatus.c:
Add SNMP Lite driver which does not depend on net-snmp library.
This makes it more portable and eliminates need to move libsnmp.so
to /lib in order to do a killpower on systems where /usr is
unmounted.
2009-09-01 20:30 adk0212
* src/apctest.c:
Implement battery calibration in apctest for USB models. Thanks to
James Belleau <james@belleau.net> for the original implementation
which has been modified somewhat in this commit.
2009-05-02 10:30 adk0212
* src/action.c:
Change log level of UPS self-test messages to WARNING from ALERT.
Given that self-test messages are routine, they do not belong at
LOG_ALERT. Contributed by Dave Ewart <davee@ceu.ox.ac.uk>.
2009-04-25 10:58 adk0212
* src/lib/apcconfig.c:
Remove EVENTFILE, EVENTFILEMAX config directives. These were
replaced by the plural versions that are in use today (EVENTSFILE,
EVENTSFILEMAX) almost 10 years ago. It's time to kill the old
names. (h/t Trevor Roydhouse <trev@sentry.org>)
2009-03-02 17:48 adk0212
* doc/apcupsd.man, include/drivers.h, include/extern.h,
src/action.c, src/apctest.c, src/apcupsd.c, src/device.c,
src/options.c, src/drivers/drivers.c,
src/drivers/apcsmart/apcsmart.h, src/drivers/apcsmart/smart.c,
src/drivers/apcsmart/smartoper.c, src/drivers/usb/usb.c,
src/drivers/usb/usb.h, src/lib/apclock.c:
Add support for turning the UPS off completely. This complements
existing hibernate (aka killpower) functionality. Turn-off is
implemented for apcsmart and USB drivers, subject to support for
the relevant commands in the UPS itself. Contributed by Keith
Campbell <campbell@econnectix.com>.
2008-06-29 11:12 adk0212
* src/action.c:
Fix bug in LOWBATT glitch handling. We must examine LOWBATT for
changes every time thru the status loop, not just during the
OnBattery state. Otherwise we can miss the initial LOWBATT
assertion, which defeats the glitch rejection logic.
2008-05-06 20:16 skoona
* src/gapcmon/gapcmon.c:
Corrected the use of NOMPOWER and the calc of current usage amount
2008-05-04 11:13 adk0212
* src/drivers/usb/usb.c:
Add a heuristic to fix up incorrect NOMINV or NOMOUTV. Some UPSes
(RS 500) report decivolts instead of volts. Reported by Kirill S.
Bychkov <yason@linklevel.net>.
2008-01-27 12:00 adk0212
* include/struct.h, platforms/etc/apcupsd.conf.in,
platforms/mingw/apcupsd.conf.in, src/device.c,
src/drivers/net/net.c, src/drivers/snmp/drv_powernet.c,
src/lib/apcconfig.c:
Add POLLTIME directive to control UPS polling interval. NETTIME is
accepted as a synonym for compatibility with old config files.
Remove @dirrm entries from PLISTs
Convert to use PLIST_VARS instead of manually passing "@comment " through PLIST_SUBST to the plist module.
Add cgi and snmp options (on by default)
Properly handle config files in $PREFIX/etc. Not sure how this worked with the previous version of the package ... Pointed out by Bernd Ernesti.
Use a more up-to-date config file as example Add rc.d keywords to the startup script both suggested by Bernd Ernesti.
Update to 3.14.1, based on patches sent in PR pkg/35594 and pkg/36246.
As a side effect this should make apcupsd build on netbsd-4 and current.
pkgsrc changes: cgi and snmp are now enabled by default.
Relevant changes since 3.12.4:
Unreliable MASTER/SLAVE networking mode is removed
PowerChute Network Shutdown driver (protocol available in the AP9617 family
of smart slot modules)
New configuration directives to set paths at runtime
pkglint cleanup; update HOMEPAGE/MASTER_SITES. From Sergey Svishchev in private mail.
Update to 3.12.4. Summary of changes since 3.8.6: * Support for USB UPSe (not enabled in pkgsrc) * new networking driver (net) that uses the NIS interface rather than the older master/slave networking * The apctest program has been enhanced to do EEPROM programming in a much more interactive way than the prior versions. * Added a ONBATTERYDELAY config, time to switch to onbattery state after a power failure. New event "offbattery", which is the same as mainsback but only sent if we got to state onbattery * new snmp driver, with trap support. * Battery disconnect and reconnect events
RCD_SCRIPTS_EXAMPLEDIR is no longer customizable. And always is defined as share/examples/rc.d which was the default before. This rc.d scripts are not automatically added to PLISTs now also. So add to each corresponding PLIST as required. This was discussed on tech-pkg in late January and late April. Todo: remove the RCD_SCRIPTS_EXAMPLEDIR uses in MESSAGES and elsewhere and remove the RCD_SCRIPTS_EXAMPLEDIR itself.
mk/bsd.pkg.install.mk now automatically registers
the RCD_SCRIPTS rc.d script(s) to the PLIST.
This GENERATE_PLIST idea is part of Greg A. Woods'
PR #22954.
This helps when the RC_SCRIPTS are installed to
a different ${RCD_SCRIPTS_EXAMPLEDIR}. (Later,
the default RCD_SCRIPTS_EXAMPLEDIR will be changed
to be more clear that they are the examples.)
These patches also remove the etc/rc.d/ scripts from PLISTs
(of packages that use RCD_SCRIPTS). (This also removes
now unused references from openssh* makefiles. Note that
qmail package has not been changed yet.)
I have been doing automatic PLIST registration for RC_SCRIPTS
for over a year. Not all of these packages have been tested,
but many have been tested and used.
Somethings maybe to do:
- a few packages still manually install the rc.d scripts to
hard-coded etc/rc.d. These need to be fixed.
- maybe remove from mk/${OPSYS}.pkg.dist mtree specifications too.
Update to 3.8.5. Summary of changes since 3.6.2: . New network interface to publish to clients the UPS status . New master/server network code that is more fault tolerant . Internationalization . Use GNU getopt . Logging on syslog . Events logged in a file like APC's PowerChute . Sync code removed: now only async processes are used . Updated documentation (HTTP version) . Bug fixes and enhancements: too many to tell them all . no more powersc script, is has been remplaced with apccontrol . In master/slave configurations, all masters and slaves must be updated at the same time. Version 3.8.0 is not compatible with versions prior to 3.8.0-pre4. . Support for the Back-UPS Office series of UPSes . Fixed dumb UPSes working with the Custom Simple cable. . Correction of a buffer overflow on certain newer UPSes. . More fault tolerant on startup in master/slave configuration. . Additional STATUS variables (number of times on battery, amount of time on batteries, time/date of last transfer to batteries, apcupsd start time/date). . apctest program for testing serial ports. . Automatic notification of certain events by email. . Detects Self Test and reports it as such rather than a Power Failure. . For SmartUPSes, apcupsd does a much better job of adapting to the actual features of the UPS and is more efficient. . Add Battery Runtime Calibration to apctest . UPSNAME now sets upsname if given. Otherwise, apcupsd attempts to get name from UPS, if not found, uses hostname, finally "default". . Added Ambient Temperature and Humidity to multimon (Carl Erhorn) A number of the configuration statements have changed since versions 3.6.2. You should either take the new apcupsd.conf file and modify it, or update your existing file. In general, we recommend starting with the new file. If you have used a prior version of apcupsd, the CONTROL script file (/sbin/powersc) has now been replaced by $SYSCONFDIR/apcupsd/apccontrol. Consequently, the CONTROL configuration statement is obsolete. The following configuration statements have been replaced by scripts called from SYSCONDFIR/apcupsd/apccontrol, and thus are obsolete: BATTCMD, LIMITCMN, LOADCMD, PWRCMD, REBOOTCMD, REMOTECMD, RETCMD, and TIMECMD. If you use the master/slave networking code, please be aware that the
Move pkg/ files into package's toplevel directory