Up to [cvs.NetBSD.org] / pkgsrc / security / ipv6-toolkit
Request diff between arbitrary revisions
Keyword substitution: kv
Default branch: MAIN
*: recursive bump for perl5 5.44.0
security/ipv6-toolkit: Update to v2.2
SI6 Networks IPv6 Toolkit 2.2
* All: Ensure consistency in version numbers across tools and documentation.
* path6: Fix bug that prevented setting TCP flags
* blackhole6: Fixed bug that lead to errors for paths >= 10 hops
* blackhole6: Polished the code
Removed unnecessary comments, and prevented some internal errors to make it
to the tool output.
* blackhole6: Set different default destination port numbers for TCP and UDP
The default UDP destination port has been changed to port 53.
SI6 Networks IPv6 Toolkit v2.1 (Jan)
* addr6: Add support for accepting only one address per prefix
Option '--block-dup-preflen' was added
* scan6: Fix bug in smart scan
There was a bug in the generation of low-byte and pattern-byte addresses.
* scan6: Improve VMWare scans
We have now added vSphere and ESX server entries
* scan6: Fix bug in default ports
When port-scanning, if not range was specified, the tool would not scan
any ports.
* script6: Add alias for "get-alexa-domains"
Some documents were using the "get-alexa" script name (rather than
"get-alexa-domains") but the short name of the script had been removed.
Now added.
SI6 Networks IPv6 Toolkit v2.0 (Guille)
* path6: New tool
Added a fully-IPv6-capable traceroute tool, named path6.
* script6: New tool
Added a new tool which incorporates new functionality and also provides
a shortcut to other existing tools.
* blackhole6: New tool
Added a new tool isolates IPv6 blackholes.
* udp6: New tool
Added a new tool that can send arbirary UDP/IPv6 packets.
* All: Fix bug when reading packets
lipcap "internals" together with select() would cause (at times)
delays when reading packets.
* All: Add support for Solaris
Solaris is now a supported platform.
* All: Fix bug in next hop determination
A bug caused, in some scenarios, the tools to fail with "cannot find
next hop".
* All: Fix support for loopback interface
The tools failed to set the "virtual" "Ether Proto" for packets sent
on the loopback interface, and hence they were discarded.
* All: Add support for domain names
All tools now support domain names in their "-d" options.
* addr6: Fix bug in address scope filtering
A bug caused address scope filters to behave incorrectly.
* addr6: Fix error in manual page
Some of the long-option names were incorrect.
* scan6: Fixes bug in address range computation
Prefixes that were not multiple of 16 resulted in bogus address ranges.
* scan6: Add support for port scanning
scan6 now implements several techniques for TCP and UDP port scanning.
* scan6: Add support for heuristic host scanning
scan6 can now automatically infer the IID type of a target and reduce
the search space accordingly (just "-d example.com/64" or
"-d IPV6ADDRESS/64".
* tcp6: Add TCP probe mode
Probe mode allows you to employ tcp6 for simple probing (e.g.,
port scanning)
* tcp6: Add "--open-mode" and "--close-mode" options
These two options allow you to cause a TCP connection at a remote
node to transition to any specific state (and hene perform e.g.,
FIN-WAIT-2 floods)
* tcp6: Add "--data" option
This options allows to set a specific TCP payload from the
command-line (e.g., an HTTP "GET" command).
* script6: Fix bug in get-aaaa, get-ns, and get-mx
Domains that had a CNAME would be skipped.
* frag6: Fix bug in Frag ID assessment
Probes are now sent every 10ms rather than in batches, to minimize packet
reordering.
SI6 Networks IPv6 Toolkit v1.5.3
* All: Fix packet size issues
Many tools were using a (sometimes non-initialized) max_packet_size
variable, instead of the corresponding member of the idata structure.
* All: Add support for some Mac OS version
The toolkit would not compile on Lion (10.7.5) or Snow Leopard (10.6.8),
as a result of inconsistencies of how BYTE_ORDER-related constants were
(not) set in those versions of Mac OS.
SI6 Networks IPv6 Toolkit v1.5.2
* All: Add support for GNU Debian/kfreebsd
The toolkit would not build on GNU Debian/kfreebsd before this release.
* tcp6: Add support for TCP/IPv6 probes
tcp6 can now send TCP/IPv6 packets ("--probe-mode" option), and read the
TCP response packets, if any. This can be leveraged for port scans, and
miscellaneous measurements.
SI6 Networks IPv6 Toolkit v1.5.1
* Fix Mac OS breakage
libipv6.h had incorrect definitions for "struct tcp_hdr".
SI6 Networks IPv6 Toolkit v1.5
* All: Improved the next-hop determination
Since the toolkit employs libpcap (as there is no portable way to forge
IPv6 addresses and do other tricks), it was relying on the user specifying
a network interface ("-i" was mandatory for all tools) and that routers
would send Router Advertisements on the local links. This not only was
rather inconvenient for users (specifying a network interface was not
warranted), but also meant that in setups where RAs where not available
(e.g., manual configuration), the tools would fail. The toolkit now
employs routing sockets (in BSDs) or Netlink (in Linux), and only uses
"sending RAs" as a fall-back in case of failure (IPv6 not configured on
the local host).
* All: Improved source address selection
This is closely related to the previous bullet.
* All: More code moved to libipv6
More and more code was moved to libipv6 and removed to the individual tool
source files. As with some of the above, this was painful and
time-consuming, but was necessary -- and in the long run it will make
code maintenance easier.
* All: libipv6 used throughout all tools
This was rather painful and non-exciting, but necessary.
Update security/ipv6-toolkit to version 1.4.1 Changes since previous version: SI6 Networks' IPv6 Toolkit v1.4.1 * frag6: Fixed bug that prevented Ethernet header from being filled A bug in the code caused Ethernet frames to go on te wire without any of their header fields completed. * All: Use of library to avoid code replication An "libipv6" library was created, such that common functions do not need to be replicated for each tool. ni6, ns6, rs6, and tcp6 now employ such library. pkgsrc changes: * address6 and its man page are no longer installed * extend the Makefile changes to include the correct linkage for rs6 and tcp6 i.e. include the libipv6 object mentioned above
update security/ipv6-toolkit to version 1.4nb1 code was added to fix the compiler uninitialised warning (thanks!), but the distfile name didn't change since it was packaged originally, so do the DIST_SUBDIR dance, and bump package version to nb1
Update ipv6-toolkit to version 1.4 from 1.3.4
Pkgsrc changes:
+ quieten warnings from gcc 4.5.3 about uninitialised variables
Distribution changes:
SI6 Networks' IPv6 Toolkit v1.4 release
* frag6: Fixed the flooding option
Fixed the fragment size used when employing the flooding option. It was
prevously sending fragment sizes that where not a multiple of eight, and
hence these fragments were dropped.
* scan6: Added support for 64-bit encoding of IPv4 addresses
Option "--tgt-ipv4" was augmented to support both encodings (32 bit
and 64 bit) of embedded IPv4 addresses.
* tcp6: Fixed response to Neighbor Solicitations
tcp6 was not responding to incomming Neighbor Solicitations. Hence, when
packets were sent from spoofed addresses, tcp6 would never receive the
response packets, because the NSs sent by the local router or target node
would never be responded.
* tcp6: Added support for TCP Window-based attacks
tcp6 can now close the window after sending an app-layer command, and
also "modulate" the TCP window to circumvent trivial mitigations for these
attacks ("--window-mode" and "--win-modulate" options).
* tcp6: Support for multiple connection-establishment types
tcp6 can now cause e.g. TCP simultaneous opens (see the "--open-mode"
option).
* tcp6: Support for multiple connection-termination types
tcp6 can now perform multiple connection-termination types (see the
"--close-mode" option).
* tcp6: Support for sending application layer requests
tcp6 can now send application-layer requests with the "--data" option.
* Many improvements to the manual pages.
Fixed the troff encoding of many manual pages. Added ipv6toolkit(7), that
describes a general description of the toolkit.
* All: Fixed bug in link-layer destination address selection
Tools now try to find a local router or perform Neighbor Discovery only
when necessary (i.e., underlying link-layer is *not* loopback or tunnel,
destination address is *not* link-local, and a link-layer destination
address has *not* been specified).
* All: Fixed bug in option handling
Incorrect data type was used for the return value of getopt_long(), thus
leading to problems in some architectures.
* All: Fixed a number of issues with pcap_next_ex()
The timeout parameter of pcap_next_ex() is now based on the platform (the
previous constant value had different semantics in different platforms).
Additionally, handle the case where pcap_next_ex() returns no packets.
* All: General improvements and clean-up
The development process now includes building the toolkit with the clang
compiler (in addition to gcc), which has lead to the identification of a
number of issues.
* All: Improved support for building the toolkit.
The toolkit now contains one makefile for pmake, and another for GNU make.
Added support for the DESTDIR variable. Appropriate paths are selected
based on the value of a number of variables. Configuration file is
dynamically generated, with the right path to the oui.txt file.
Update security/ipv6-toolkit from version 1.3.3 to 1.3.4 Changes from previous version: * IPv6-host tracking support in the scan6 tool. * A new tool, address6, to analyze IPv6 addresses * Minor bug fixes * PDF manual pages have been removed * additional manual pages pkgsrc changes: * patch to avoid "uninitialised variable" warning from compiler
Update security/ipv6-toolkit to version 1.3.3 This minor update incorporates the "--tgt-known-iids" option, which can be used to track systems across networks, even if they employ the so-called "Privacy Address" (and yes, that includes Microsoft Windows systems).
The distfile changed on the master site after the original digest was created, so put the new version of the distfile into a DIST_DUBDIR. New distfile has been verified to contain the pkgsrc patch -- which actually caused the change in the distfile.
Update ipv6-toolkit from 1.3beta to 1.3 Changes since previous version: + Minor documentation updates + gmake no longer needed to build + updated patch - still needed to quieten compiler for ctype warnings (reported upstream)
Fix the package name to reflect that this is version 1.3beta
Initial import of the SI6 ipv6-toolkit, a security assessment and troubleshooting package for ipv6, into the Packages Collection. This is version 1.3b. The SI6 Networks' IPv6 toolkit is a set of IPv6 security/trouble-shooting tools, that can send arbitrary IPv6-based packets. flow6: A tool to perform a security asseessment of the IPv6 Flow Label. frag6: A tool to perform IPv6 fragmentation-based attacks and to perform a security assessment of a number of fragmentation-related aspects. icmp6: A tool to perform attacks based on ICMPv6 error messages. jumbo6: A tool to assess potential flaws in the handling of IPv6 Jumbograms. na6: A tool to send arbitrary Neighbor Advertisement messages. ni6: A tool to send arbitrary ICMPv6 Node Information messages, and assess possible flaws in the processing of such packets. ns6: A tool to send arbitrary Neighbor Solicitation messages. ra6: A tool to send arbitrary Router Advertisement messages. rd6: A tool to send arbitrary ICMPv6 Redirect messages. rs6: A tool to send arbitrary Router Solicitation messages. scan6: An IPv6 address scanning tool. tcp6: A tool to send arbitrary TCP segments and perform a variety of TCP-based attacks.
Initial revision