Annotation of pkgsrc/pkgtools/pkg_rolling-replace/files/pkg_rolling-replace.sh, revision 1.6
1.1 gdt 1: #!/bin/sh
2:
1.6 ! tnn 3: # $NetBSD: pkg_rolling-replace.sh,v 1.5 2007/05/20 13:35:56 tnn Exp $
1.1 gdt 4: #<license>
5: # Copyright (c) 2006 BBN Technologies Corp. All rights reserved.
6: #
7: # Redistribution and use in source and binary forms, with or without
8: # modification, are permitted provided that the following conditions
9: # are met:
10: # 1. Redistributions of source code must retain the above copyright
11: # notice, this list of conditions and the following disclaimer.
12: # 2. Redistributions in binary form must reproduce the above copyright
13: # notice, this list of conditions and the following disclaimer in the
14: # documentation and/or other materials provided with the distribution.
15: # 3. Neither the name of BBN Technologies nor the names of its contributors
16: # may be used to endorse or promote products derived from this software
17: # without specific prior written permission.
18: #
19: # THIS SOFTWARE IS PROVIDED BY BBN TECHNOLOGIES AND CONTRIBUTORS ``AS IS''
20: # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21: # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22: # ARE DISCLAIMED. IN NO EVENT SHALL BBN TECHNOLOGIES OR CONTRIBUTORS BE
23: # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24: # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25: # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26: # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27: # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28: # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29: # POSSIBILITY OF SUCH DAMAGE.
30: #
31: # Effort sponsored in part by the Defense Advanced Research Projects
32: # Agency (DARPA) and the Department of the Interior National Business
33: # Center under agreement number NBCHC050166.
34: #</license>
35:
36: # REVIEW NOTATION LEGEND
37: # XXX marks things that are broken/kludgy
38: # TODO marks things that need to be done
39: # FIXED marks items fixed, needs review and deletion of FIXED comment
40:
41: # Items to be completed for initial release:
42:
43: # TODO: move bulk of help into a real man page.
44:
45: # Items for future work (some imply changes in pkgsrc, not necessarily here)
46: #
47: # Make a pass over all packages for build depends, and rememeber
48: # which packages have been so checked. Check newly unsafe packages.
49: # The current lazy evaluation can perhaps fail to do things in the
50: # right order. Alternatively, explain why the current scheme is safe
51: # and preferred.
52: #
53: # Consider expansion to update via binary packages. This raises
54: # interesting questions about ABIs and binary builds
55: #
56: # Deal with conflicts in a smarter way, perhaps more automatically.
57: # This is hard because just removing packages is not ok.
58: #
59: # Handle foo being split into foo and foo-share. Now, make replace
60: # of foo pulls in foo-share which conflicts with foo. This needlessly
61: # loses.
62: #
63:
1.3 tnn 64: # Substituted by pkgsrc at pre-configure time.
1.4 tnn 65: MAKE="@MAKE@"
1.3 tnn 66:
67: test -z "$PKG_DBDIR" && PKG_DBDIR=/var/db/pkg
1.4 tnn 68: test -z "$MAKECONF" && MAKECONF="@MAKECONF@"
69: test -f "$MAKECONF" && test -z "$PKGSRCDIR" && \
1.6 ! tnn 70: PKGSRCDIR="`(cat "$MAKECONF"; \
! 71: printf '\n_print_pkgsrcdir:\n\t@echo "${PKGSRCDIR}"\n') | \
! 72: "$MAKE" BSD_PKG_MK=1 -f - _print_pkgsrcdir`"
1.3 tnn 73: test -z "$PKGSRCDIR" && PKGSRCDIR=/usr/pkgsrc
1.1 gdt 74:
75: unset PKG_PATH || true #or pkgsrc makefiles will complain
76:
77: usage()
78: {
79: echo "Usage: pkg_rolling-replace [opts]
80: -h This help
81: -n Don't actually do make replace
82: -u Update mismatched packages
83: -v Verbose
84: -x <pkg> exclude <pkg> from update check
85:
86: pkg_rolling-replace does 'make replace' on one package at a time,
87: tsorting the packages being replaced according to their
88: interdependencies, which avoids most duplicate rebuilds.
89:
90: pkg_rolling-replace can be used in one of two ways:
91:
92: - 'make replace' is unsafe in that, if the replaced package's ABI
93: changes, its dependent packages may break. If this happens, run
94: 'pkg_rolling-replace' (no arguments) to rebuild them against the
95: new version.
96:
97: - 'pkg_chk -u' will delete all your mismatched (outdated)
98: packages, then reinstall them one at a time, leaving you without
99: those packages in the meantime. 'pkg_rolling-replace -u' will
100: instead upgrade them in place, allowing you to keep using your
101: system in the meantime (maybe...if you're lucky...because
102: pkg_rolling-replace replaces the \"deepest\" dependency first,
103: things could still break if that happens to be a fundamental
104: library whose ABI has changed).
105: "
106: exit 1
107: }
108:
109: # pkg_rolling-replace's output is intermingled with pkgsrc make
110: # output. Thus, we use a different prefix. pkgsrc uses '===>' for
111: # major steps, and '=>' for minor ones. Thus, we use 'RR>'.
112:
113: OPI='RR>'
114: OPC='rr>' # continuation
115:
116:
117: # Echo the names of packages needing updates, versions stripped. This
118: # has been tested with pkg_chk 1.76. Older versions are not
119: # supported. Newer versions may or may not work (patches welcome).
120: check_packages_mismatched()
121: {
122: pkg_chk -u -q | while read line; do
123: # duplicate output of pkg_chk to stderr (bypass $(...) or `...`)
124: echo "${OPC} $line" > /dev/stderr
125: # Look for the first thing that looks like pkg-version rather
126: # than category/pkg and remove the version.
127: for word in $line; do
1.5 tnn 128: if [ "$(echo $word | egrep '^[^/]+-[0-9][^-/]*$')" ]; then
129: echo $word | sed 's/-[0-9][^-]*$//'
1.1 gdt 130: break #done with this line
131: fi
132: done
133: done
134: }
135:
136: # usage: check_packages_w_flag flag
137: # echo packages with flag=YES
138: check_packages_w_flag()
139: {
140: _flag=$1; shift
141: for pkgver in $(pkg_info -e '*'); do
142: if pkg_info -Bq $pkgver \
143: | egrep "^$_flag=[Yy][Ee][Ss]" > /dev/null; then
1.5 tnn 144: echo $pkgver | sed 's/-[0-9][^-]*$//'
1.1 gdt 145: fi
146: done
147: }
148:
149: # echo dep->pkg edges for all installed packages
150: depgraph_installed()
151: {
152: for pkgver in $(pkg_info -e '*'); do
1.5 tnn 153: pkg=$(echo $pkgver | sed 's/-[0-9][^-]*$//')
1.1 gdt 154: # Include $pkg as a node without dependencies in case it has none.
155: echo $pkg $pkg
156: for depver in $(pkg_info -Nq $pkg); do
1.5 tnn 157: dep=$(echo $depver | sed 's/-[0-9][^-]*$//')
1.1 gdt 158: echo $dep $pkg
159: done
160: done
161: }
162:
163: # usage: who_requires pkg --in-graph DEPGRAPH
164: who_requires()
165: {
166: _target=$1; shift
167: test "$1" = '--in-graph' && shift || return $((false))
168:
169: while [ $# -gt 0 ]; do
170: _dep=$1; _pkg=$2; shift 2;
171: if [ $_dep = $_target -a $_dep != $_pkg ]; then
172: echo $_pkg
173: fi
174: done
175: }
176:
177: # usage: is_member x list
178: # return true (0) if x appears in list, false (1) otherwise
179: is_member()
180: {
181: _x="$1"; shift;
182: while [ $# -gt 0 -a "$1" != "$_x" ]; do
183: shift
184: done
185:
186: test $# -gt 0
187: }
188:
189: # usage: exclude list1 --from list2
190: # echo list2 with items from list1 excluded
191: exclude()
192: {
193: _excl=
194: while [ $# -gt 0 -a $1 != "--from" ]; do
195: _excl="$_excl $1"
196: shift
197: done
198: if [ $# -gt 0 ]; then
199: shift #discard '--from'
200: fi
201: while [ $# -gt 0 ]; do
202: is_member $1 $_excl || echo $1
203: shift
204: done
205: }
206:
207: # usage: uniquify list
208: # just does sort -u on list (equiv. to sort | uniq)
209: # CAUTION: reorders list
210: uniqify()
211: {
212: for _x in $*; do echo $_x; done | sort -u
213: }
214:
215: verbose()
216: {
217: if [ -n "$opt_v" ]; then
218: echo "$@"
219: fi
220: }
221:
222: vsleep()
223: {
224: if [ -n "$opt_v" ]; then
225: sleep $1
226: fi
227: }
228:
229: ######################################################################
230: ##
231: ## main()
232: ##
233:
234: EXCLUDE=
235:
236: args=$(getopt hnuvx: $*)
237: if [ $? -ne 0 ]; then
238: opt_h=1
239: fi
240: set -- $args
241: while [ $# -gt 0 ]; do
242: case "$1" in
243: -h) opt_h=1 ;;
244: -n) opt_n=1 ;;
245: -u) opt_u=1 ;;
246: -v) opt_v=1 ;;
247: -x) EXCLUDE="$EXCLUDE $(echo $2 | sed 's/,/ /g')" ; shift ;;
248: --) shift; break ;;
249: esac
250: shift
251: done
252:
253: if [ -n "$opt_h" ]; then
254: usage
255: fi
256:
257: MISMATCH_TODO=
258: if [ -n "$opt_u" ]; then
259: echo "${OPI} Checking for mismatched installed packages using pkg_chk"
260: MISMATCH_TODO=$(check_packages_mismatched)
261: echo "${OPI} Excluding the following mismatched packages:"
262: echo "${OPC} EXCLUDE=[$EXCLUDE]"
263: MISMATCH_TODO=$(exclude $EXCLUDE --from $MISMATCH_TODO)
264: fi
265:
266: echo "${OPI} Checking for rebuild-requested installed packages (rebuild=YES)"
267: REBUILD_TODO=$(check_packages_w_flag 'rebuild')
268:
269: echo "${OPI} Checking for unsafe installed packages (unsafe_depends=YES)"
270: UNSAFE_TODO=$(check_packages_w_flag 'unsafe_depends')
271:
272: # DEPGRAPH_INSTALLED is rebuilt each round. DEPGRAPH_SRC will collect
273: # edges that we discover using 'make show-depends', but that weren't
274: # listed as depends by the installed version of a package, and
275: # DEPENDS_CHECKED lists packages for which we've already done that
276: # check.
277: DEPGRAPH_INSTALLED=
278: DEPGRAPH_SRC=
279: DEPENDS_CHECKED=
280:
281: verbose "${OPI} Packages to rebuild:"
282: verbose "${OPC} MISMATCH_TODO=[$(echo $MISMATCH_TODO)]" #strip newlines
283: verbose "${OPC} REBUILD_TODO=[$(echo $REBUILD_TODO)]"
284: verbose "${OPC} UNSAFE_TODO=[$(echo $UNSAFE_TODO)]"
285: vsleep 2
286:
287: REPLACE_TODO=$(uniqify $MISMATCH_TODO $REBUILD_TODO $UNSAFE_TODO)
288: depgraph_built=0
289:
290: while [ -n "$REPLACE_TODO" ]; do
291: # don't rebuild depgraph if we continued from new-depends step below
292: if [ "$depgraph_built" -eq 0 ]; then
293: echo "${OPI} Building dependency graph for installed packages"
294: DEPGRAPH_INSTALLED=$(depgraph_installed)
295: depgraph_built=1
296: fi
297:
298: echo "${OPI} Tsorting dependency graph"
299: TSORTED=$(echo $DEPGRAPH_INSTALLED $DEPGRAPH_SRC | tsort)
300: for pkg in $TSORTED; do
301: if is_member $pkg $REPLACE_TODO; then
302: break;
303: fi
304: done
305: pkgdir=$(pkg_info -Bq $pkg | awk -F= '/PKGPATH=/{print $2}')
306: echo "${OPI} Selecting $pkg ($pkgdir) as next package to replace"
307: sleep 1
308:
309: # Newer versions in pkgsrc sometimes have more depends than are
310: # recorded for the installed version (this is entirely to be
311: # expected as packages are split, renamed, and add new features).
312: # When this happens, add the new edges to the graph and re-tsort.
313: # Don't re-tsort if the new edges were already installed once
314: # (otherwise we'll go into a loop).
315:
316: # XXX I'm not sure that DEPENDS_CHECKED is necessary, or whether
317: # simply ignoring new deps that aren't in $REPLACE_TODO would have
318: # been sufficient. The DEPENDS_CHECKED approach causes one extra
319: # tsort in some cases, which isn't overly expensive.
320:
321: # XXX After tsorting and choosing what to 'make replace', we
322: # filter out packages that aren't already installed and marked for
323: # replacement. This is safe, since uninstalled depends will be
324: # pulled in automatically by 'make replace'; but in rare cases it
325: # might be non-optimal, leading to a duplicate rebuild that we
326: # would have avoided had we selected the uninstalled package in
327: # tsorted order and run 'make install' on it. This seems like
328: # such a rare case that the added complexity isn't worth it.
329:
330: if ! is_member $pkg $DEPENDS_CHECKED; then
331: echo "${OPI} Checking if $pkg has new depends..."
1.5 tnn 332: OLD_DEPENDS=$(pkg_info -Nq $pkg | sed 's/-[0-9][^-]*$//')
1.1 gdt 333: NEW_DEPENDS=
334: cd "$PKGSRCDIR/$pkgdir"
335: bdeps=$(${MAKE} show-depends VARNAME=BUILD_DEPENDS)
336: rdeps=$(${MAKE} show-depends)
337: for depver in $bdeps $rdeps; do
1.5 tnn 338: dep=$(echo $depver | sed -E -e 's/[:[].*$/0/' \
339: -e 's/(>=|<=|-)[0-9][^-]*$//')
1.1 gdt 340: if ! is_member $dep $OLD_DEPENDS $NEW_DEPENDS; then
341: NEW_DEPENDS="$NEW_DEPENDS $dep"
342: DEPGRAPH_SRC="$DEPGRAPH_SRC $dep $pkg"
343: fi
344: done
345: DEPENDS_CHECKED="$DEPENDS_CHECKED $pkg"
346: if [ -n "$NEW_DEPENDS" ]; then
347: echo "${OPI} $pkg has the following new depends (need to re-tsort):"
348: echo "${OPC} [$(echo $NEW_DEPENDS)]"
349: sleep 2
350: continue
351: fi
352: fi
353:
354: # Do make replace, with clean before, and package and clean afterwards.
355: echo "${OPI} Replacing $(pkg_info -e $pkg)"
356: FAIL=
357: if [ -z "$opt_n" ]; then
358: cd "$PKGSRCDIR/$pkgdir" \
359: && ${MAKE} clean && ${MAKE} replace && ${MAKE} package && ${MAKE} clean \
360: || FAIL=1
361: else
362: echo "cd $PKGSRCDIR/$pkgdir && ${MAKE} clean && ${MAKE} replace && ${MAKE} package && ${MAKE} clean"
363: fi
364: if [ -n "$FAIL" ]; then
365: echo "*** 'make replace' failed for package $pkg."
366: echo "*** Please read the errors listed above, fix the problem,"
367: echo "*** then re-run pkg_rolling-replace to continue."
368: exit 1
369: fi
370: sleep 1
371:
372: # remove just-replaced package from all *_TODO lists
373: MISMATCH_TODO=$(exclude $pkg --from $MISMATCH_TODO)
374: REBUILD_TODO=$(exclude $pkg --from $REBUILD_TODO)
375: UNSAFE_TODO=$(exclude $pkg --from $UNSAFE_TODO)
376:
377: echo "${OPI} Re-checking for unsafe installed packages (unsafe_depends=YES)"
378: if [ -n "$opt_n" ]; then
379: # With -n, the replace didn't happen, and thus the packages that would
380: # have been marked unsafe_depends=YES were not. Add the set that
381: # would have been marked so we can watch what pkg_rolling-replace
382: # would have done (approximately).
383: UNSAFE_TODO=$(uniqify $UNSAFE_TODO \
384: $(who_requires $pkg --in-graph $DEPGRAPH_INSTALLED))
385: sleep 1
386: else
387: UNSAFE_TODO=$(check_packages_w_flag 'unsafe_depends')
388: fi
389:
390: verbose "${OPI} Packages to rebuild:"
391: verbose "${OPC} MISMATCH_TODO=[$(echo $MISMATCH_TODO)]" #strips newlines
392: verbose "${OPC} REBUILD_TODO=[$(echo $REBUILD_TODO)]"
393: verbose "${OPC} UNSAFE_TODO=[$(echo $UNSAFE_TODO)]"
394: vsleep 4
395:
396: REPLACE_TODO=$(uniqify $MISMATCH_TODO $REBUILD_TODO $UNSAFE_TODO)
397: depgraph_built=0
398: done
399:
400: echo "${OPI} No more packages to replace; done."
CVSweb <webmaster@jp.NetBSD.org>