Annotation of pkgsrc/pkgtools/pkg_rolling-replace/files/pkg_rolling-replace.sh, revision 1.42

1.1       gdt         1: #!/bin/sh
                      2: 
1.42    ! tnn         3: # $NetBSD: pkg_rolling-replace.sh,v 1.41 2021/01/09 19:12:46 rhialto Exp $
1.1       gdt         4: #<license>
                      5: # Copyright (c) 2006 BBN Technologies Corp.  All rights reserved.
                      6: #
                      7: # Redistribution and use in source and binary forms, with or without
                      8: # modification, are permitted provided that the following conditions
                      9: # are met:
                     10: # 1. Redistributions of source code must retain the above copyright
                     11: #    notice, this list of conditions and the following disclaimer.
                     12: # 2. Redistributions in binary form must reproduce the above copyright
                     13: #    notice, this list of conditions and the following disclaimer in the
                     14: #    documentation and/or other materials provided with the distribution.
                     15: # 3. Neither the name of BBN Technologies nor the names of its contributors
                     16: #    may be used to endorse or promote products derived from this software
                     17: #    without specific prior written permission.
                     18: #
                     19: # THIS SOFTWARE IS PROVIDED BY BBN TECHNOLOGIES AND CONTRIBUTORS ``AS IS''
                     20: # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
                     21: # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
                     22: # ARE DISCLAIMED.  IN NO EVENT SHALL BBN TECHNOLOGIES OR CONTRIBUTORS BE
                     23: # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
                     24: # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
                     25: # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
                     26: # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
                     27: # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
                     28: # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
                     29: # POSSIBILITY OF SUCH DAMAGE.
                     30: #
                     31: # Effort sponsored in part by the Defense Advanced Research Projects
                     32: # Agency (DARPA) and the Department of the Interior National Business
                     33: # Center under agreement number NBCHC050166.
                     34: #</license>
                     35: 
                     36: # REVIEW NOTATION LEGEND
                     37: #   XXX marks things that are broken/kludgy
                     38: #   TODO marks things that need to be done
                     39: #   FIXED marks items fixed, needs review and deletion of FIXED comment
                     40: 
                     41: # Items to be completed for initial release:
                     42: 
                     43: # TODO: move bulk of help into a real man page.
                     44: 
                     45: # Items for future work (some imply changes in pkgsrc, not necessarily here)
                     46: #
                     47: #   Make a pass over all packages for build depends, and rememeber
                     48: # which packages have been so checked.  Check newly unsafe packages.
                     49: # The current lazy evaluation can perhaps fail to do things in the
                     50: # right order.  Alternatively, explain why the current scheme is safe
                     51: # and preferred.
                     52: #
                     53: #   Consider expansion to update via binary packages.  This raises
                     54: # interesting questions about ABIs and binary builds
                     55: #
                     56: #   Deal with conflicts in a smarter way, perhaps more automatically.
                     57: # This is hard because just removing packages is not ok.
                     58: #
                     59: #   Handle foo being split into foo and foo-share.  Now, make replace
                     60: # of foo pulls in foo-share which conflicts with foo.  This needlessly
                     61: # loses.
                     62: #
                     63: 
1.3       tnn        64: # Substituted by pkgsrc at pre-configure time.
1.4       tnn        65: MAKE="@MAKE@"
1.15      tnn        66: AWK="@AWK@"
1.3       tnn        67: 
1.19      apb        68: if [ -z "$MAKECONF" ] ; then
                     69:     for mkconf in "@MAKECONF@" "@PREFIX@/etc/mk.conf" /etc/mk.conf ; do
                     70:        if [ -f "$mkconf" ] ; then
                     71:            MAKECONF="$mkconf"
                     72:            break
                     73:        fi
                     74:     done
                     75: fi
                     76: if [ -z "$MAKECONF" -o ! -f "$MAKECONF" ] ; then
                     77:     MAKECONF=/dev/null
                     78: fi
1.7       tnn        79: test -f "$MAKECONF" && test -z "$PKGSRCDIR" && PKGSRCDIR="` \
                     80:     printf '.include "%s"\n_print_pkgsrcdir:\n\t@echo "${PKGSRCDIR}"\n' \
1.8       tnn        81:     "$MAKECONF" | "$MAKE" -f - BSD_PKG_MK=1 _print_pkgsrcdir`"
1.19      apb        82: if [ -z "$PKGSRCDIR" ] ; then
                     83:     for dir in . .. ../.. /usr/pkgsrc ; do
                     84:        if [ -f "${dir}/mk/bsd.pkg.mk" ]; then
                     85:            case "${dir}" in
                     86:            /*) PKGSRCDIR="${dir}" ;;
                     87:            *)  PKGSRCDIR="$( cd "${dir}" >/dev/null 2>&1 && pwd )" ;;
                     88:            esac
                     89:            break
                     90:        fi
                     91:     done
                     92: fi
                     93: test -z "$PKGSRCDIR" && echo >&2 "Please set PKGSRCDIR" && exit 1
1.12      tnn        94: test -z "$PKG_CHK" && PKG_CHK="@PKG_CHK@"
1.42    ! tnn        95: test -z "$PKG_ADMIN" && PKG_ADMIN="@PKG_ADMIN_CMD@"
1.12      tnn        96: test -z "$PKG_INFO" && PKG_INFO="@PKG_INFO_CMD@"
1.1       gdt        97: 
1.19      apb        98: export PKGSRCDIR
                     99: 
1.1       gdt       100: unset PKG_PATH || true  #or pkgsrc makefiles will complain
                    101: 
                    102: usage()
                    103: {
                    104:     echo "Usage: pkg_rolling-replace [opts]
                    105:         -h         This help
1.34      abs       106:         -B         Pass -B to pkg_chk (only applies with -u)
1.22      sno       107:         -F         Fetch sources (including depends) only, don't build
                    108:         -k         Keep running, even on error
1.1       gdt       109:         -n         Don't actually do make replace
1.13      tnn       110:         -r         Just replace, don't create binary packages
                    111:         -s         Replace even if the ABIs are still compatible ("strict")
1.41      rhialto   112:         -u         Update mismatched packages
1.1       gdt       113:         -v         Verbose
1.25      sno       114:        -D VAR=VAL Passes given variables and values to make
1.22      sno       115:         -L <path>  Log to path (<path>/pkgdir/pkg)
1.20      wiz       116:         -X <pkg>   exclude <pkg> from being rebuilt
1.41      rhialto   117:         -x <pkg>   exclude <pkg> from mismatch check
1.1       gdt       118: 
                    119: pkg_rolling-replace does 'make replace' on one package at a time,
                    120: tsorting the packages being replaced according to their
                    121: interdependencies, which avoids most duplicate rebuilds.
                    122: 
                    123: pkg_rolling-replace can be used in one of two ways:
                    124: 
                    125:     - 'make replace' is unsafe in that, if the replaced package's ABI
                    126:       changes, its dependent packages may break.  If this happens, run
                    127:       'pkg_rolling-replace' (no arguments) to rebuild them against the
                    128:       new version.
                    129: 
1.41      rhialto   130:     - 'pkg_chk -u' will delete all your mismatched packages (where the
                    131:       package version does not match the pkgsrc version), then reinstall
                    132:       them one at a time, leaving you without those packages in the
                    133:       meantime.  'pkg_rolling-replace -u' will instead upgrade them in
                    134:       place, allowing you to keep using your system in the meantime
                    135:       (maybe...if you're lucky...because pkg_rolling-replace replaces
                    136:       the \"deepest\" dependency first, things could still break if that
                    137:       happens to be a fundamental library whose ABI has changed).
1.1       gdt       138: "
                    139:     exit 1
                    140: }
                    141: 
                    142: # pkg_rolling-replace's output is intermingled with pkgsrc make
                    143: # output.  Thus, we use a different prefix.  pkgsrc uses '===>' for
                    144: # major steps, and '=>' for minor ones.  Thus, we use 'RR>'.
                    145: 
                    146: OPI='RR>'
                    147: OPC='rr>' # continuation
                    148: 
                    149: 
                    150: # Echo the names of packages needing updates, versions stripped.  This
                    151: # has been tested with pkg_chk 1.76.  Older versions are not
                    152: # supported.  Newer versions may or may not work (patches welcome).
                    153: check_packages_mismatched()
                    154: {
1.39      gdt       155:     ${PKG_CHK} -u -q $opt_B | egrep -v missing | while read line; do
1.1       gdt       156:         # duplicate output of pkg_chk to stderr (bypass $(...) or `...`)
1.11      tnn       157:         echo "${OPC} $line" 1>&2
1.1       gdt       158:        # Look for the first thing that looks like pkg-version rather
                    159:        # than category/pkg and remove the version.
                    160:         for word in $line; do
1.5       tnn       161:             if [ "$(echo $word | egrep '^[^/]+-[0-9][^-/]*$')" ]; then
1.41      rhialto   162:                if [ -z "$opt_F" ]; then
1.42    ! tnn       163:                    ${PKG_ADMIN} set mismatch=YES "$word" 1>&2
1.41      rhialto   164:                fi
1.5       tnn       165:                 echo $word | sed 's/-[0-9][^-]*$//'
1.1       gdt       166:                 break  #done with this line
                    167:             fi
                    168:         done
                    169:     done
                    170: }
                    171: 
                    172: # usage: check_packages_w_flag flag
                    173: # echo packages with flag=YES
                    174: check_packages_w_flag()
                    175: {
                    176:     _flag=$1; shift
1.12      tnn       177:     for pkgver in $(${PKG_INFO} -e '*'); do
                    178:         if ${PKG_INFO} -Bq $pkgver \
1.1       gdt       179:                 | egrep "^$_flag=[Yy][Ee][Ss]" > /dev/null; then
1.5       tnn       180:             echo $pkgver | sed 's/-[0-9][^-]*$//'
1.1       gdt       181:         fi
                    182:     done
                    183: }
                    184: 
                    185: # echo dep->pkg edges for all installed packages
                    186: depgraph_installed()
                    187: {
1.15      tnn       188:        ${PKG_INFO} -N '*' | ${AWK} '                                   \
                    189:                /^Information for/ {                                    \
                    190:                        pkg=$3; sub("-[0-9][^-]*:$", "", pkg);          \
                    191:                        print pkg" "pkg;                                \
                    192:                        state=1;                                        \
                    193:                }                                                       \
1.16      gdt       194:                /^\** PACKAGE MAY NOT BE DELETED \**$/ { state=3; }     \
1.15      tnn       195:                /^./ {                                                  \
                    196:                        if (state == 2) {                               \
                    197:                                dep=$1; sub("-[0-9][^-]*$", "", dep);   \
                    198:                                print dep" "pkg;                        \
                    199:                        }                                               \
                    200:                }                                                       \
                    201:                /^Built using/ {                                        \
                    202:                        state=2                                         \
                    203:                }                                                       \
                    204:        '
1.1       gdt       205: }
                    206: 
                    207: # usage: who_requires pkg --in-graph DEPGRAPH
                    208: who_requires()
                    209: {
                    210:     _target=$1; shift
                    211:     test "$1" = '--in-graph' && shift || return $((false))
                    212: 
                    213:     while [ $# -gt 0 ]; do
                    214:         _dep=$1; _pkg=$2; shift 2;
                    215:         if [ $_dep = $_target -a $_dep != $_pkg ]; then
                    216:             echo $_pkg
                    217:         fi
                    218:     done
                    219: }
                    220: 
                    221: # usage: is_member x list
                    222: # return true (0) if x appears in list, false (1) otherwise
                    223: is_member()
                    224: {
                    225:     _x="$1"; shift;
                    226:     while [ $# -gt 0 -a "$1" != "$_x" ]; do
                    227:         shift
                    228:     done
                    229: 
                    230:     test $# -gt 0
                    231: }
                    232: 
                    233: # usage: exclude list1 --from list2
                    234: # echo list2 with items from list1 excluded
                    235: exclude()
                    236: {
                    237:     _excl=
                    238:     while [ $# -gt 0 -a $1 != "--from" ]; do
                    239:         _excl="$_excl $1"
                    240:         shift
                    241:     done
                    242:     if [ $# -gt 0 ]; then
                    243:         shift  #discard '--from'
                    244:     fi
                    245:     while [ $# -gt 0 ]; do
                    246:         is_member $1 $_excl || echo $1
                    247:         shift
                    248:     done
                    249: }
                    250: 
                    251: # usage: uniquify list
                    252: # just does sort -u on list (equiv. to sort | uniq)
                    253: # CAUTION: reorders list
                    254: uniqify()
                    255: {
                    256:     for _x in $*; do echo $_x; done | sort -u
                    257: }
                    258: 
                    259: verbose()
                    260: {
                    261:     if [ -n "$opt_v" ]; then
                    262:         echo "$@"
                    263:     fi
                    264: }
                    265: 
                    266: vsleep()
                    267: {
                    268:     if [ -n "$opt_v" ]; then
                    269:         sleep $1
                    270:     fi
                    271: }
                    272: 
1.22      sno       273: report()
                    274: {
1.26      tnn       275:     for a in $SUCCEEDED; do
1.22      sno       276:         verbose "+ $a"
                    277:     done
                    278: 
                    279:     for a in $FAILED; do
                    280:         verbose "- $a"
                    281:     done
                    282: }
                    283: 
1.13      tnn       284: abort()
                    285: {
1.26      tnn       286:     echo "*** $1"
                    287:     echo "*** Please read the errors listed above, fix the problem,"
                    288:     echo "*** then re-run pkg_rolling-replace to continue."
                    289:     report
                    290:     exit 1
                    291: }
                    292: 
                    293: error()
                    294: {
1.28      tnn       295:     if [ -z "$opt_k" ]; then
1.26      tnn       296:         abort "$1"
                    297:     fi
                    298:     echo "*** $1"
                    299: }
                    300: 
                    301: mark_as_succeeded()
                    302: {
1.27      tnn       303:     SUCCEEDED=$(uniqify $SUCCEEDED $1)
1.26      tnn       304: }
                    305: 
                    306: mark_as_failed()
                    307: {
1.27      tnn       308:     FAILED=$(uniqify $FAILED $1)
1.13      tnn       309: }
                    310: 
1.22      sno       311: todo()
                    312: {
                    313:     if [ -z "$opt_F" ]; then
                    314:         verbose "${OPI} Packages to rebuild:"
                    315:         verbose "${OPC} MISMATCH_TODO=[$(echo $MISMATCH_TODO)]"  #strip newlines
                    316:         verbose "${OPC} REBUILD_TODO=[$(echo $REBUILD_TODO)]"
                    317:         verbose "${OPC} UNSAFE_TODO=[$(echo $UNSAFE_TODO)]"
                    318:         REPLACE_TODO=$(uniqify $MISMATCH_TODO $REBUILD_TODO $UNSAFE_TODO)
                    319:     else
                    320:         REPLACE_TODO=$(uniqify $MISMATCH_TODO)
                    321:         verbose "${OPI} Packages to fetch:"
                    322:         verbose "${OPC} MISMATCH_TODO=[$(echo $MISMATCH_TODO)]"  #strip newlines
                    323:     fi
                    324:     REPLACE_TODO=$(exclude $REALLYEXCLUDE --from $REPLACE_TODO)
                    325:     if [ -n "$FAILED" ]; then
                    326:         REPLACE_TODO=$(exclude $FAILED --from $REPLACE_TODO)
                    327:     fi
                    328:     vsleep 2
                    329: }
                    330: 
1.1       gdt       331: ######################################################################
                    332: ##
                    333: ## main()
                    334: ##
                    335: 
                    336: EXCLUDE=
1.25      sno       337: MAKE_VAR="IN_PKG_ROLLING_REPLACE=1"
                    338: MAKE_VAR_SEP=" "
1.1       gdt       339: 
1.34      abs       340: args=$(getopt BFhknursvD:x:X:L: $*)
1.1       gdt       341: if [ $? -ne 0 ]; then
                    342:     opt_h=1
                    343: fi
                    344: set -- $args
                    345: while [ $# -gt 0 ]; do
                    346:     case "$1" in
1.34      abs       347:         -B) opt_B=-B ;;
1.22      sno       348:         -F) opt_F=1 ;;
1.1       gdt       349:         -h) opt_h=1 ;;
1.22      sno       350:         -k) opt_k=1 ;;
1.1       gdt       351:         -n) opt_n=1 ;;
1.13      tnn       352:         -r) opt_r=1 ;;
                    353:         -s) opt_s=1 ;;
1.1       gdt       354:         -u) opt_u=1 ;;
                    355:         -v) opt_v=1 ;;
1.25      sno       356:        -D) MAKE_VAR="${MAKE_VAR}${MAKE_VAR_SEP}$2"; MAKE_VAR_SEP=" "; shift ;;
1.1       gdt       357:         -x) EXCLUDE="$EXCLUDE $(echo $2 | sed 's/,/ /g')" ; shift ;;
1.17      apb       358:         -X) REALLYEXCLUDE="$REALLYEXCLUDE $(echo $2 | sed 's/,/ /g')" ; shift ;;
1.22      sno       359:         -L) LOGPATH="$2"; shift ;;
1.1       gdt       360:         --) shift; break ;;
                    361:     esac
                    362:     shift
                    363: done
                    364: 
                    365: if [ -n "$opt_h" ]; then
                    366:     usage
                    367: fi
                    368: 
1.13      tnn       369: if [ -n "$opt_s" ]; then
                    370:     UNSAFE_VAR=unsafe_depends_strict
                    371: else
                    372:     UNSAFE_VAR=unsafe_depends
                    373: fi
                    374: 
1.25      sno       375: MAKE="${MAKE}${MAKE_VAR_SEP}${MAKE_VAR}"
                    376: 
1.26      tnn       377: SUCCEEDED=""
1.22      sno       378: FAILED=""
                    379: 
1.1       gdt       380: MISMATCH_TODO=
1.41      rhialto   381: if [ -n "$opt_u" ]; then
1.1       gdt       382:     echo "${OPI} Checking for mismatched installed packages using pkg_chk"
                    383:     MISMATCH_TODO=$(check_packages_mismatched)
1.41      rhialto   384: else
                    385:     echo "${OPI} Checking for mismatched installed packages (mismatch=YES)"
                    386:     MISMATCH_TODO=$(check_packages_w_flag 'mismatch')
1.1       gdt       387: fi
                    388: 
1.41      rhialto   389: echo "${OPI} Excluding the following mismatched packages:"
                    390: echo "${OPC} EXCLUDE=[$EXCLUDE]"
                    391: MISMATCH_TODO=$(exclude $EXCLUDE --from $MISMATCH_TODO)
                    392: 
1.22      sno       393: if [ -z "$opt_F" ]; then
                    394:     echo "${OPI} Checking for rebuild-requested installed packages (rebuild=YES)"
                    395:     REBUILD_TODO=$(check_packages_w_flag 'rebuild')
1.1       gdt       396: 
1.22      sno       397:     echo "${OPI} Checking for unsafe installed packages (${UNSAFE_VAR}=YES)"
                    398:     UNSAFE_TODO=$(check_packages_w_flag ${UNSAFE_VAR})
                    399: fi
1.1       gdt       400: 
                    401: # DEPGRAPH_INSTALLED is rebuilt each round.  DEPGRAPH_SRC will collect
                    402: # edges that we discover using 'make show-depends', but that weren't
                    403: # listed as depends by the installed version of a package, and
                    404: # DEPENDS_CHECKED lists packages for which we've already done that
                    405: # check.
                    406: DEPGRAPH_INSTALLED=
                    407: DEPGRAPH_SRC=
                    408: DEPENDS_CHECKED=
                    409: 
1.22      sno       410: todo
1.1       gdt       411: 
                    412: depgraph_built=0
                    413: 
                    414: while [ -n "$REPLACE_TODO" ]; do
1.22      sno       415:     fail=
                    416: 
1.1       gdt       417:     # don't rebuild depgraph if we continued from new-depends step below
                    418:     if [ "$depgraph_built" -eq 0 ]; then
                    419:         echo "${OPI} Building dependency graph for installed packages"
                    420:         DEPGRAPH_INSTALLED=$(depgraph_installed)
                    421:         depgraph_built=1
                    422:     fi
                    423: 
                    424:     echo "${OPI} Tsorting dependency graph"
                    425:     TSORTED=$(echo $DEPGRAPH_INSTALLED $DEPGRAPH_SRC | tsort)
1.29      gdt       426:     pkgdir=
1.1       gdt       427:     for pkg in $TSORTED; do
                    428:         if is_member $pkg $REPLACE_TODO; then
1.29      gdt       429:            pkgdir=$(${PKG_INFO} -Q PKGPATH $pkg)
1.40      gdt       430:            if [ -n "$pkgdir" ]; then
                    431:                break;
                    432:            else
                    433:                error "Couldn't extract PKGPATH from installed package $pkg"
                    434:            fi
1.1       gdt       435:         fi
                    436:     done
1.29      gdt       437:     # loop should never exit without selecting a package
                    438:     [ -n "$pkgdir" ] || abort "pkg_chk reports the following packages need replacing, but they are not installed: $REPLACE_TODO"
1.26      tnn       439: 
1.1       gdt       440:     echo "${OPI} Selecting $pkg ($pkgdir) as next package to replace"
                    441:     sleep 1
                    442: 
                    443:     # Newer versions in pkgsrc sometimes have more depends than are
                    444:     # recorded for the installed version (this is entirely to be
                    445:     # expected as packages are split, renamed, and add new features).
                    446:     # When this happens, add the new edges to the graph and re-tsort.
                    447:     # Don't re-tsort if the new edges were already installed once
                    448:     # (otherwise we'll go into a loop).
                    449: 
                    450:     # XXX I'm not sure that DEPENDS_CHECKED is necessary, or whether
                    451:     # simply ignoring new deps that aren't in $REPLACE_TODO would have
                    452:     # been sufficient.  The DEPENDS_CHECKED approach causes one extra
                    453:     # tsort in some cases, which isn't overly expensive.
                    454: 
                    455:     # XXX After tsorting and choosing what to 'make replace', we
                    456:     # filter out packages that aren't already installed and marked for
                    457:     # replacement.  This is safe, since uninstalled depends will be
                    458:     # pulled in automatically by 'make replace'; but in rare cases it
                    459:     # might be non-optimal, leading to a duplicate rebuild that we
                    460:     # would have avoided had we selected the uninstalled package in
                    461:     # tsorted order and run 'make install' on it.  This seems like
                    462:     # such a rare case that the added complexity isn't worth it.
                    463: 
1.30      gdt       464:     # Set PKGNAME_REQD to give underlying make processes a chance to
                    465:     # set options derived from the package name.  For example,
                    466:     # the appropriate version of Python can be derived from the
1.35      wiz       467:     # package name (so, when building py34-foo, use python-3.4,
1.33      wiz       468:     # not python-2.7).
1.32      gdt       469:     MAKE_SET_VARS="PKGNAME_REQD=${pkg}-*"
1.30      gdt       470: 
1.1       gdt       471:     if ! is_member $pkg $DEPENDS_CHECKED; then
                    472:        echo "${OPI} Checking if $pkg has new depends..."
1.12      tnn       473:        OLD_DEPENDS=$(${PKG_INFO} -Nq $pkg | sed 's/-[0-9][^-]*$//')
1.1       gdt       474:        NEW_DEPENDS=
                    475:        cd "$PKGSRCDIR/$pkgdir"
1.31      obache    476:        bdeps=$(@SETENV@ ${MAKE_SET_VARS} ${MAKE} show-depends VARNAME=BUILD_DEPENDS)
1.37      gdt       477:        tdeps=$(@SETENV@ ${MAKE_SET_VARS} ${MAKE} show-depends VARNAME=TOOL_DEPENDS)
1.31      obache    478:        rdeps=$(@SETENV@ ${MAKE_SET_VARS} ${MAKE} show-depends)
1.37      gdt       479:        for depver in $bdeps $tdeps $rdeps; do
1.10      tnn       480:            dep=$(echo $depver | sed -e 's/[:[].*$/0/' -e 's/[<>]=/-/' \
                    481:                -e 's/-[0-9][^-]*$//')
1.1       gdt       482:            if ! is_member $dep $OLD_DEPENDS $NEW_DEPENDS; then
                    483:                NEW_DEPENDS="$NEW_DEPENDS $dep"
                    484:                DEPGRAPH_SRC="$DEPGRAPH_SRC $dep $pkg"
                    485:            fi
                    486:        done
                    487:        DEPENDS_CHECKED="$DEPENDS_CHECKED $pkg"
                    488:        if [ -n "$NEW_DEPENDS" ]; then
                    489:            echo "${OPI} $pkg has the following new depends (need to re-tsort):"
                    490:            echo "${OPC} [$(echo $NEW_DEPENDS)]"
                    491:            sleep 2
                    492:            continue
                    493:        fi
                    494:     fi
                    495: 
1.22      sno       496:     pkgname=$(${PKG_INFO} -e $pkg)
                    497:     if [ -n "$LOGPATH" ]; then
                    498:         logdir="$LOGPATH/`dirname $pkgdir`"
                    499:         logfile="$logdir/$pkgname"
                    500:         @MKDIR@ "$logdir" || abort "mkdir -p '$logdir' failed"
                    501:         exec 3>"$logfile"
                    502:         tail -f "$logfile" &
                    503:         TAILPID=$!
                    504:     fi
                    505: 
1.1       gdt       506:     # Do make replace, with clean before, and package and clean afterwards.
1.13      tnn       507:     fail=
1.23      sno       508:     if [ -d "$PKGSRCDIR/$pkgdir" ]; then
                    509:        cd "$PKGSRCDIR/$pkgdir";
1.22      sno       510:     else
1.36      gdt       511:        fail=1
1.26      tnn       512:         mark_as_failed $pkg
                    513:        error "No package directory '$pkgdir' for $pkg."
1.22      sno       514:     fi
1.23      sno       515: 
                    516:     if [ -z "$fail" ]; then
                    517:        if [ -z "$opt_F" ]; then
                    518:            echo "${OPI} Replacing $pkgname"
1.31      obache    519:            cmd="@SETENV@ ${MAKE_SET_VARS} ${MAKE} clean || fail=1"
1.23      sno       520:            if [ -n "$opt_n" ]; then
                    521:                echo "${OPI} Would run: $cmd"
                    522:            else
                    523:                if [ -n "$logfile" ]; then
                    524:                    eval "$cmd" >&3 2>&3
                    525:                else
                    526:                    eval "$cmd"
                    527:                fi
                    528:                if [ -n "$fail" ]; then
1.26      tnn       529:                     mark_as_failed $pkg
                    530:                    error "'make clean' failed for package $pkg."
1.23      sno       531:                fi
                    532:            fi
1.31      obache    533:            cmd="@SETENV@ ${MAKE_SET_VARS} ${MAKE} replace || fail=1" # XXX OLDNAME= support? xmlrpc-c -> xmlrpc-c-ss
1.23      sno       534:        else
                    535:            echo "${OPI} Fetching $pkgname"
1.31      obache    536:            cmd="@SETENV@ ${MAKE_SET_VARS} ${MAKE} fetch depends-fetch || fail=1"
1.23      sno       537:        fi
                    538:     fi
                    539: 
1.22      sno       540:     if [ -n "$opt_n" -a -z "$fail" ]; then
1.13      tnn       541:        echo "${OPI} Would run: $cmd"
1.22      sno       542:     elif [ -z "$fail" ]; then
                    543:         if [ -n "$logfile" ]; then
                    544:             eval "$cmd" >&3 2>&3
                    545:         else
                    546:             eval "$cmd"
                    547:         fi
                    548:        if [ -n "$fail" ]; then
1.26      tnn       549:             mark_as_failed $pkg
                    550:             error "'make replace' failed for package $pkg."
1.22      sno       551:         fi
1.13      tnn       552:     fi
1.22      sno       553:     if [ -z "$opt_n" -a -z "$opt_k" -a -z "$opt_F" ]; then
1.13      tnn       554:        [ -z "$(${PKG_INFO} -Q unsafe_depends_strict $pkg)" ] || \
                    555:            abort "package $pkg still has unsafe_depends_strict."
                    556:        [ -z "$(${PKG_INFO} -Q unsafe_depends $pkg)" ] || \
                    557:            abort "package $pkg still has unsafe_depends."
                    558:        [ -z "$(${PKG_INFO} -Q rebuild $pkg)" ] || \
                    559:            abort "package $pkg is still requested to be rebuilt."
1.41      rhialto   560:        [ -z "$(${PKG_INFO} -Q mismatch $pkg)" ] || \
                    561:            abort "package $pkg is still a mismatched version."
1.1       gdt       562:     fi
1.18      gdt       563:     # If -r not given, make a binary package.
1.22      sno       564:     if [ -z "$opt_r" -a -z "$fail" -a -z "$opt_F" ]; then
1.13      tnn       565:        echo "${OPI} Packaging $(${PKG_INFO} -e $pkg)"
1.31      obache    566:        cmd="@SETENV@ ${MAKE_SET_VARS} ${MAKE} package || fail=1"
1.22      sno       567:        if [ -n "$opt_n" -a -z "$fail" ]; then
1.13      tnn       568:            echo "${OPI} Would run: $cmd"
1.22      sno       569:        elif [ -z "$fail" ]; then
                    570:             if [ -n "$logfile" ]; then
                    571:                 eval "$cmd" >&3 2>&3
                    572:             else
                    573:                 eval "$cmd"
                    574:             fi
                    575:             if [ -n "$fail" ]; then
1.26      tnn       576:                 mark_as_failed $pkg
                    577:                 error "'make package' failed for package $pkg."
1.22      sno       578:             fi
1.13      tnn       579:        fi
1.1       gdt       580:     fi
1.18      gdt       581:     # Clean
1.22      sno       582:     if [ -z "$opt_n" -a -z "$fail" -a -z "$opt_F" ]; then
1.31      obache    583:         cmd="@SETENV@ ${MAKE_SET_VARS} ${MAKE} clean || fail=1"
1.22      sno       584:         if [ -n "$logfile" ]; then
                    585:             eval "$cmd" >&3 2>&3
                    586:         else
                    587:             eval "$cmd"
                    588:         fi
                    589:        if [ -n "$fail" ]; then
1.26      tnn       590:             mark_as_failed $pkg
                    591:             error "'make clean' failed for package $pkg."
1.22      sno       592:         fi
                    593:     fi
                    594: 
                    595:     if [ -z "$fail" ]; then
1.26      tnn       596:         mark_as_succeeded $pkg
1.18      gdt       597:     fi
                    598: 
1.1       gdt       599:     sleep 1
                    600: 
                    601:     # remove just-replaced package from all *_TODO lists
                    602:     MISMATCH_TODO=$(exclude $pkg --from $MISMATCH_TODO)
                    603:     REBUILD_TODO=$(exclude $pkg --from $REBUILD_TODO)
                    604:     UNSAFE_TODO=$(exclude $pkg --from $UNSAFE_TODO)
                    605: 
1.13      tnn       606:     echo "${OPI} Re-checking for unsafe installed packages (${UNSAFE_VAR}=YES)"
1.1       gdt       607:     if [ -n "$opt_n" ]; then
                    608:        # With -n, the replace didn't happen, and thus the packages that would
                    609:        # have been marked unsafe_depends=YES were not.  Add the set that
                    610:        # would have been marked so we can watch what pkg_rolling-replace
                    611:        # would have done (approximately).
                    612:         UNSAFE_TODO=$(uniqify $UNSAFE_TODO \
                    613:             $(who_requires $pkg --in-graph $DEPGRAPH_INSTALLED))
                    614:         sleep 1
                    615:     else
1.13      tnn       616:         UNSAFE_TODO=$(check_packages_w_flag ${UNSAFE_VAR})
1.1       gdt       617:     fi
                    618: 
1.22      sno       619:     depgraph_built=0
                    620: 
                    621:     todo
                    622:     vsleep 2
1.1       gdt       623: 
1.22      sno       624:     if [ -n "$logfile" ]; then
                    625:         exec 3>&-
                    626:         kill $TAILPID
                    627:     fi
1.1       gdt       628: done
                    629: 
                    630: echo "${OPI} No more packages to replace; done."
1.22      sno       631: 
                    632: report

CVSweb <webmaster@jp.NetBSD.org>