Annotation of pkgsrc/pkgtools/pkg_rolling-replace/files/pkg_rolling-replace.sh, revision 1.29

1.1       gdt         1: #!/bin/sh
                      2: 
1.29    ! gdt         3: # $NetBSD: pkg_rolling-replace.sh,v 1.28 2010/02/11 12:54:27 tnn Exp $
1.1       gdt         4: #<license>
                      5: # Copyright (c) 2006 BBN Technologies Corp.  All rights reserved.
                      6: #
                      7: # Redistribution and use in source and binary forms, with or without
                      8: # modification, are permitted provided that the following conditions
                      9: # are met:
                     10: # 1. Redistributions of source code must retain the above copyright
                     11: #    notice, this list of conditions and the following disclaimer.
                     12: # 2. Redistributions in binary form must reproduce the above copyright
                     13: #    notice, this list of conditions and the following disclaimer in the
                     14: #    documentation and/or other materials provided with the distribution.
                     15: # 3. Neither the name of BBN Technologies nor the names of its contributors
                     16: #    may be used to endorse or promote products derived from this software
                     17: #    without specific prior written permission.
                     18: #
                     19: # THIS SOFTWARE IS PROVIDED BY BBN TECHNOLOGIES AND CONTRIBUTORS ``AS IS''
                     20: # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
                     21: # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
                     22: # ARE DISCLAIMED.  IN NO EVENT SHALL BBN TECHNOLOGIES OR CONTRIBUTORS BE
                     23: # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
                     24: # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
                     25: # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
                     26: # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
                     27: # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
                     28: # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
                     29: # POSSIBILITY OF SUCH DAMAGE.
                     30: #
                     31: # Effort sponsored in part by the Defense Advanced Research Projects
                     32: # Agency (DARPA) and the Department of the Interior National Business
                     33: # Center under agreement number NBCHC050166.
                     34: #</license>
                     35: 
                     36: # REVIEW NOTATION LEGEND
                     37: #   XXX marks things that are broken/kludgy
                     38: #   TODO marks things that need to be done
                     39: #   FIXED marks items fixed, needs review and deletion of FIXED comment
                     40: 
                     41: # Items to be completed for initial release:
                     42: 
                     43: # TODO: move bulk of help into a real man page.
                     44: 
                     45: # Items for future work (some imply changes in pkgsrc, not necessarily here)
                     46: #
                     47: #   Make a pass over all packages for build depends, and rememeber
                     48: # which packages have been so checked.  Check newly unsafe packages.
                     49: # The current lazy evaluation can perhaps fail to do things in the
                     50: # right order.  Alternatively, explain why the current scheme is safe
                     51: # and preferred.
                     52: #
                     53: #   Consider expansion to update via binary packages.  This raises
                     54: # interesting questions about ABIs and binary builds
                     55: #
                     56: #   Deal with conflicts in a smarter way, perhaps more automatically.
                     57: # This is hard because just removing packages is not ok.
                     58: #
                     59: #   Handle foo being split into foo and foo-share.  Now, make replace
                     60: # of foo pulls in foo-share which conflicts with foo.  This needlessly
                     61: # loses.
                     62: #
                     63: 
1.3       tnn        64: # Substituted by pkgsrc at pre-configure time.
1.4       tnn        65: MAKE="@MAKE@"
1.15      tnn        66: AWK="@AWK@"
1.3       tnn        67: 
1.19      apb        68: if [ -z "$MAKECONF" ] ; then
                     69:     for mkconf in "@MAKECONF@" "@PREFIX@/etc/mk.conf" /etc/mk.conf ; do
                     70:        if [ -f "$mkconf" ] ; then
                     71:            MAKECONF="$mkconf"
                     72:            break
                     73:        fi
                     74:     done
                     75: fi
                     76: if [ -z "$MAKECONF" -o ! -f "$MAKECONF" ] ; then
                     77:     MAKECONF=/dev/null
                     78: fi
1.7       tnn        79: test -f "$MAKECONF" && test -z "$PKGSRCDIR" && PKGSRCDIR="` \
                     80:     printf '.include "%s"\n_print_pkgsrcdir:\n\t@echo "${PKGSRCDIR}"\n' \
1.8       tnn        81:     "$MAKECONF" | "$MAKE" -f - BSD_PKG_MK=1 _print_pkgsrcdir`"
1.19      apb        82: if [ -z "$PKGSRCDIR" ] ; then
                     83:     for dir in . .. ../.. /usr/pkgsrc ; do
                     84:        if [ -f "${dir}/mk/bsd.pkg.mk" ]; then
                     85:            case "${dir}" in
                     86:            /*) PKGSRCDIR="${dir}" ;;
                     87:            *)  PKGSRCDIR="$( cd "${dir}" >/dev/null 2>&1 && pwd )" ;;
                     88:            esac
                     89:            break
                     90:        fi
                     91:     done
                     92: fi
                     93: test -z "$PKGSRCDIR" && echo >&2 "Please set PKGSRCDIR" && exit 1
1.12      tnn        94: test -z "$PKG_CHK" && PKG_CHK="@PKG_CHK@"
                     95: test -z "$PKG_INFO" && PKG_INFO="@PKG_INFO_CMD@"
1.1       gdt        96: 
1.19      apb        97: export PKGSRCDIR
                     98: 
1.1       gdt        99: unset PKG_PATH || true  #or pkgsrc makefiles will complain
                    100: 
                    101: usage()
                    102: {
                    103:     echo "Usage: pkg_rolling-replace [opts]
                    104:         -h         This help
1.22      sno       105:         -F         Fetch sources (including depends) only, don't build
                    106:         -k         Keep running, even on error
1.1       gdt       107:         -n         Don't actually do make replace
1.13      tnn       108:         -r         Just replace, don't create binary packages
                    109:         -s         Replace even if the ABIs are still compatible ("strict")
1.17      apb       110:         -u         Update outdated packages
1.1       gdt       111:         -v         Verbose
1.25      sno       112:        -D VAR=VAL Passes given variables and values to make
1.22      sno       113:         -L <path>  Log to path (<path>/pkgdir/pkg)
1.20      wiz       114:         -X <pkg>   exclude <pkg> from being rebuilt
1.17      apb       115:         -x <pkg>   exclude <pkg> from outdated check
1.1       gdt       116: 
                    117: pkg_rolling-replace does 'make replace' on one package at a time,
                    118: tsorting the packages being replaced according to their
                    119: interdependencies, which avoids most duplicate rebuilds.
                    120: 
                    121: pkg_rolling-replace can be used in one of two ways:
                    122: 
                    123:     - 'make replace' is unsafe in that, if the replaced package's ABI
                    124:       changes, its dependent packages may break.  If this happens, run
                    125:       'pkg_rolling-replace' (no arguments) to rebuild them against the
                    126:       new version.
                    127: 
                    128:     - 'pkg_chk -u' will delete all your mismatched (outdated)
                    129:       packages, then reinstall them one at a time, leaving you without
                    130:       those packages in the meantime.  'pkg_rolling-replace -u' will
                    131:       instead upgrade them in place, allowing you to keep using your
                    132:       system in the meantime (maybe...if you're lucky...because
                    133:       pkg_rolling-replace replaces the \"deepest\" dependency first,
                    134:       things could still break if that happens to be a fundamental
                    135:       library whose ABI has changed).
                    136: "
                    137:     exit 1
                    138: }
                    139: 
                    140: # pkg_rolling-replace's output is intermingled with pkgsrc make
                    141: # output.  Thus, we use a different prefix.  pkgsrc uses '===>' for
                    142: # major steps, and '=>' for minor ones.  Thus, we use 'RR>'.
                    143: 
                    144: OPI='RR>'
                    145: OPC='rr>' # continuation
                    146: 
                    147: 
                    148: # Echo the names of packages needing updates, versions stripped.  This
                    149: # has been tested with pkg_chk 1.76.  Older versions are not
                    150: # supported.  Newer versions may or may not work (patches welcome).
                    151: check_packages_mismatched()
                    152: {
1.12      tnn       153:     ${PKG_CHK} -u -q | while read line; do
1.1       gdt       154:         # duplicate output of pkg_chk to stderr (bypass $(...) or `...`)
1.11      tnn       155:         echo "${OPC} $line" 1>&2
1.1       gdt       156:        # Look for the first thing that looks like pkg-version rather
                    157:        # than category/pkg and remove the version.
                    158:         for word in $line; do
1.5       tnn       159:             if [ "$(echo $word | egrep '^[^/]+-[0-9][^-/]*$')" ]; then
                    160:                 echo $word | sed 's/-[0-9][^-]*$//'
1.1       gdt       161:                 break  #done with this line
                    162:             fi
                    163:         done
                    164:     done
                    165: }
                    166: 
                    167: # usage: check_packages_w_flag flag
                    168: # echo packages with flag=YES
                    169: check_packages_w_flag()
                    170: {
                    171:     _flag=$1; shift
1.12      tnn       172:     for pkgver in $(${PKG_INFO} -e '*'); do
                    173:         if ${PKG_INFO} -Bq $pkgver \
1.1       gdt       174:                 | egrep "^$_flag=[Yy][Ee][Ss]" > /dev/null; then
1.5       tnn       175:             echo $pkgver | sed 's/-[0-9][^-]*$//'
1.1       gdt       176:         fi
                    177:     done
                    178: }
                    179: 
                    180: # echo dep->pkg edges for all installed packages
                    181: depgraph_installed()
                    182: {
1.15      tnn       183:        ${PKG_INFO} -N '*' | ${AWK} '                                   \
                    184:                /^Information for/ {                                    \
                    185:                        pkg=$3; sub("-[0-9][^-]*:$", "", pkg);          \
                    186:                        print pkg" "pkg;                                \
                    187:                        state=1;                                        \
                    188:                }                                                       \
1.16      gdt       189:                /^\** PACKAGE MAY NOT BE DELETED \**$/ { state=3; }     \
1.15      tnn       190:                /^./ {                                                  \
                    191:                        if (state == 2) {                               \
                    192:                                dep=$1; sub("-[0-9][^-]*$", "", dep);   \
                    193:                                print dep" "pkg;                        \
                    194:                        }                                               \
                    195:                }                                                       \
                    196:                /^Built using/ {                                        \
                    197:                        state=2                                         \
                    198:                }                                                       \
                    199:        '
1.1       gdt       200: }
                    201: 
                    202: # usage: who_requires pkg --in-graph DEPGRAPH
                    203: who_requires()
                    204: {
                    205:     _target=$1; shift
                    206:     test "$1" = '--in-graph' && shift || return $((false))
                    207: 
                    208:     while [ $# -gt 0 ]; do
                    209:         _dep=$1; _pkg=$2; shift 2;
                    210:         if [ $_dep = $_target -a $_dep != $_pkg ]; then
                    211:             echo $_pkg
                    212:         fi
                    213:     done
                    214: }
                    215: 
                    216: # usage: is_member x list
                    217: # return true (0) if x appears in list, false (1) otherwise
                    218: is_member()
                    219: {
                    220:     _x="$1"; shift;
                    221:     while [ $# -gt 0 -a "$1" != "$_x" ]; do
                    222:         shift
                    223:     done
                    224: 
                    225:     test $# -gt 0
                    226: }
                    227: 
                    228: # usage: exclude list1 --from list2
                    229: # echo list2 with items from list1 excluded
                    230: exclude()
                    231: {
                    232:     _excl=
                    233:     while [ $# -gt 0 -a $1 != "--from" ]; do
                    234:         _excl="$_excl $1"
                    235:         shift
                    236:     done
                    237:     if [ $# -gt 0 ]; then
                    238:         shift  #discard '--from'
                    239:     fi
                    240:     while [ $# -gt 0 ]; do
                    241:         is_member $1 $_excl || echo $1
                    242:         shift
                    243:     done
                    244: }
                    245: 
                    246: # usage: uniquify list
                    247: # just does sort -u on list (equiv. to sort | uniq)
                    248: # CAUTION: reorders list
                    249: uniqify()
                    250: {
                    251:     for _x in $*; do echo $_x; done | sort -u
                    252: }
                    253: 
                    254: verbose()
                    255: {
                    256:     if [ -n "$opt_v" ]; then
                    257:         echo "$@"
                    258:     fi
                    259: }
                    260: 
                    261: vsleep()
                    262: {
                    263:     if [ -n "$opt_v" ]; then
                    264:         sleep $1
                    265:     fi
                    266: }
                    267: 
1.22      sno       268: report()
                    269: {
1.26      tnn       270:     for a in $SUCCEEDED; do
1.22      sno       271:         verbose "+ $a"
                    272:     done
                    273: 
                    274:     for a in $FAILED; do
                    275:         verbose "- $a"
                    276:     done
                    277: }
                    278: 
1.13      tnn       279: abort()
                    280: {
1.26      tnn       281:     echo "*** $1"
                    282:     echo "*** Please read the errors listed above, fix the problem,"
                    283:     echo "*** then re-run pkg_rolling-replace to continue."
                    284:     report
                    285:     exit 1
                    286: }
                    287: 
                    288: error()
                    289: {
1.28      tnn       290:     if [ -z "$opt_k" ]; then
1.26      tnn       291:         abort "$1"
                    292:     fi
                    293:     echo "*** $1"
                    294: }
                    295: 
                    296: mark_as_succeeded()
                    297: {
1.27      tnn       298:     SUCCEEDED=$(uniqify $SUCCEEDED $1)
1.26      tnn       299: }
                    300: 
                    301: mark_as_failed()
                    302: {
1.27      tnn       303:     FAILED=$(uniqify $FAILED $1)
1.13      tnn       304: }
                    305: 
1.22      sno       306: todo()
                    307: {
                    308:     if [ -z "$opt_F" ]; then
                    309:         verbose "${OPI} Packages to rebuild:"
                    310:         verbose "${OPC} MISMATCH_TODO=[$(echo $MISMATCH_TODO)]"  #strip newlines
                    311:         verbose "${OPC} REBUILD_TODO=[$(echo $REBUILD_TODO)]"
                    312:         verbose "${OPC} UNSAFE_TODO=[$(echo $UNSAFE_TODO)]"
                    313:         REPLACE_TODO=$(uniqify $MISMATCH_TODO $REBUILD_TODO $UNSAFE_TODO)
                    314:     else
                    315:         REPLACE_TODO=$(uniqify $MISMATCH_TODO)
                    316:         verbose "${OPI} Packages to fetch:"
                    317:         verbose "${OPC} MISMATCH_TODO=[$(echo $MISMATCH_TODO)]"  #strip newlines
                    318:     fi
                    319:     REPLACE_TODO=$(exclude $REALLYEXCLUDE --from $REPLACE_TODO)
                    320:     if [ -n "$FAILED" ]; then
                    321:         REPLACE_TODO=$(exclude $FAILED --from $REPLACE_TODO)
                    322:     fi
                    323:     vsleep 2
                    324: }
                    325: 
1.1       gdt       326: ######################################################################
                    327: ##
                    328: ## main()
                    329: ##
                    330: 
                    331: EXCLUDE=
1.25      sno       332: MAKE_VAR="IN_PKG_ROLLING_REPLACE=1"
                    333: MAKE_VAR_SEP=" "
1.1       gdt       334: 
1.25      sno       335: args=$(getopt FhknursvD:x:X:L: $*)
1.1       gdt       336: if [ $? -ne 0 ]; then
                    337:     opt_h=1
                    338: fi
                    339: set -- $args
                    340: while [ $# -gt 0 ]; do
                    341:     case "$1" in
1.22      sno       342:         -F) opt_F=1 ;;
1.1       gdt       343:         -h) opt_h=1 ;;
1.22      sno       344:         -k) opt_k=1 ;;
1.1       gdt       345:         -n) opt_n=1 ;;
1.13      tnn       346:         -r) opt_r=1 ;;
                    347:         -s) opt_s=1 ;;
1.1       gdt       348:         -u) opt_u=1 ;;
                    349:         -v) opt_v=1 ;;
1.25      sno       350:        -D) MAKE_VAR="${MAKE_VAR}${MAKE_VAR_SEP}$2"; MAKE_VAR_SEP=" "; shift ;;
1.1       gdt       351:         -x) EXCLUDE="$EXCLUDE $(echo $2 | sed 's/,/ /g')" ; shift ;;
1.17      apb       352:         -X) REALLYEXCLUDE="$REALLYEXCLUDE $(echo $2 | sed 's/,/ /g')" ; shift ;;
1.22      sno       353:         -L) LOGPATH="$2"; shift ;;
1.1       gdt       354:         --) shift; break ;;
                    355:     esac
                    356:     shift
                    357: done
                    358: 
                    359: if [ -n "$opt_h" ]; then
                    360:     usage
                    361: fi
                    362: 
1.13      tnn       363: if [ -n "$opt_s" ]; then
                    364:     UNSAFE_VAR=unsafe_depends_strict
                    365: else
                    366:     UNSAFE_VAR=unsafe_depends
                    367: fi
                    368: 
1.25      sno       369: MAKE="${MAKE}${MAKE_VAR_SEP}${MAKE_VAR}"
                    370: 
1.26      tnn       371: SUCCEEDED=""
1.22      sno       372: FAILED=""
                    373: 
1.1       gdt       374: MISMATCH_TODO=
1.22      sno       375: if [ -n "$opt_u" -o -n "$opt_F" ]; then
1.1       gdt       376:     echo "${OPI} Checking for mismatched installed packages using pkg_chk"
                    377:     MISMATCH_TODO=$(check_packages_mismatched)
                    378:     echo "${OPI} Excluding the following mismatched packages:"
                    379:     echo "${OPC} EXCLUDE=[$EXCLUDE]"
                    380:     MISMATCH_TODO=$(exclude $EXCLUDE --from $MISMATCH_TODO)
                    381: fi
                    382: 
1.22      sno       383: if [ -z "$opt_F" ]; then
                    384:     echo "${OPI} Checking for rebuild-requested installed packages (rebuild=YES)"
                    385:     REBUILD_TODO=$(check_packages_w_flag 'rebuild')
1.1       gdt       386: 
1.22      sno       387:     echo "${OPI} Checking for unsafe installed packages (${UNSAFE_VAR}=YES)"
                    388:     UNSAFE_TODO=$(check_packages_w_flag ${UNSAFE_VAR})
                    389: fi
1.1       gdt       390: 
                    391: # DEPGRAPH_INSTALLED is rebuilt each round.  DEPGRAPH_SRC will collect
                    392: # edges that we discover using 'make show-depends', but that weren't
                    393: # listed as depends by the installed version of a package, and
                    394: # DEPENDS_CHECKED lists packages for which we've already done that
                    395: # check.
                    396: DEPGRAPH_INSTALLED=
                    397: DEPGRAPH_SRC=
                    398: DEPENDS_CHECKED=
                    399: 
1.22      sno       400: todo
1.1       gdt       401: 
                    402: depgraph_built=0
                    403: 
                    404: while [ -n "$REPLACE_TODO" ]; do
1.22      sno       405:     fail=
                    406: 
1.1       gdt       407:     # don't rebuild depgraph if we continued from new-depends step below
                    408:     if [ "$depgraph_built" -eq 0 ]; then
                    409:         echo "${OPI} Building dependency graph for installed packages"
                    410:         DEPGRAPH_INSTALLED=$(depgraph_installed)
                    411:         depgraph_built=1
                    412:     fi
                    413: 
                    414:     echo "${OPI} Tsorting dependency graph"
                    415:     TSORTED=$(echo $DEPGRAPH_INSTALLED $DEPGRAPH_SRC | tsort)
1.29    ! gdt       416:     pkgdir=
1.1       gdt       417:     for pkg in $TSORTED; do
                    418:         if is_member $pkg $REPLACE_TODO; then
1.29    ! gdt       419:            pkgdir=$(${PKG_INFO} -Q PKGPATH $pkg)
        !           420:            [ -n "$pkgdir" ] || abort "Couldn't extract PKGPATH from installed package $pkg"
1.1       gdt       421:             break;
                    422:         fi
                    423:     done
1.29    ! gdt       424:     # loop should never exit without selecting a package
        !           425:     [ -n "$pkgdir" ] || abort "pkg_chk reports the following packages need replacing, but they are not installed: $REPLACE_TODO"
1.26      tnn       426: 
1.1       gdt       427:     echo "${OPI} Selecting $pkg ($pkgdir) as next package to replace"
                    428:     sleep 1
                    429: 
                    430:     # Newer versions in pkgsrc sometimes have more depends than are
                    431:     # recorded for the installed version (this is entirely to be
                    432:     # expected as packages are split, renamed, and add new features).
                    433:     # When this happens, add the new edges to the graph and re-tsort.
                    434:     # Don't re-tsort if the new edges were already installed once
                    435:     # (otherwise we'll go into a loop).
                    436: 
                    437:     # XXX I'm not sure that DEPENDS_CHECKED is necessary, or whether
                    438:     # simply ignoring new deps that aren't in $REPLACE_TODO would have
                    439:     # been sufficient.  The DEPENDS_CHECKED approach causes one extra
                    440:     # tsort in some cases, which isn't overly expensive.
                    441: 
                    442:     # XXX After tsorting and choosing what to 'make replace', we
                    443:     # filter out packages that aren't already installed and marked for
                    444:     # replacement.  This is safe, since uninstalled depends will be
                    445:     # pulled in automatically by 'make replace'; but in rare cases it
                    446:     # might be non-optimal, leading to a duplicate rebuild that we
                    447:     # would have avoided had we selected the uninstalled package in
                    448:     # tsorted order and run 'make install' on it.  This seems like
                    449:     # such a rare case that the added complexity isn't worth it.
                    450: 
                    451:     if ! is_member $pkg $DEPENDS_CHECKED; then
                    452:        echo "${OPI} Checking if $pkg has new depends..."
1.12      tnn       453:        OLD_DEPENDS=$(${PKG_INFO} -Nq $pkg | sed 's/-[0-9][^-]*$//')
1.1       gdt       454:        NEW_DEPENDS=
                    455:        cd "$PKGSRCDIR/$pkgdir"
                    456:        bdeps=$(${MAKE} show-depends VARNAME=BUILD_DEPENDS)
                    457:        rdeps=$(${MAKE} show-depends)
                    458:        for depver in $bdeps $rdeps; do
1.10      tnn       459:            dep=$(echo $depver | sed -e 's/[:[].*$/0/' -e 's/[<>]=/-/' \
                    460:                -e 's/-[0-9][^-]*$//')
1.1       gdt       461:            if ! is_member $dep $OLD_DEPENDS $NEW_DEPENDS; then
                    462:                NEW_DEPENDS="$NEW_DEPENDS $dep"
                    463:                DEPGRAPH_SRC="$DEPGRAPH_SRC $dep $pkg"
                    464:            fi
                    465:        done
                    466:        DEPENDS_CHECKED="$DEPENDS_CHECKED $pkg"
                    467:        if [ -n "$NEW_DEPENDS" ]; then
                    468:            echo "${OPI} $pkg has the following new depends (need to re-tsort):"
                    469:            echo "${OPC} [$(echo $NEW_DEPENDS)]"
                    470:            sleep 2
                    471:            continue
                    472:        fi
                    473:     fi
                    474: 
1.22      sno       475:     pkgname=$(${PKG_INFO} -e $pkg)
                    476:     if [ -n "$LOGPATH" ]; then
                    477:         logdir="$LOGPATH/`dirname $pkgdir`"
                    478:         logfile="$logdir/$pkgname"
                    479:         @MKDIR@ "$logdir" || abort "mkdir -p '$logdir' failed"
                    480:         exec 3>"$logfile"
                    481:         tail -f "$logfile" &
                    482:         TAILPID=$!
                    483:     fi
                    484: 
1.1       gdt       485:     # Do make replace, with clean before, and package and clean afterwards.
1.13      tnn       486:     fail=
1.23      sno       487:     if [ -d "$PKGSRCDIR/$pkgdir" ]; then
                    488:        cd "$PKGSRCDIR/$pkgdir";
1.22      sno       489:     else
1.26      tnn       490:         mark_as_failed $pkg
                    491:        error "No package directory '$pkgdir' for $pkg."
1.22      sno       492:     fi
1.23      sno       493: 
                    494:     if [ -z "$fail" ]; then
                    495:        if [ -z "$opt_F" ]; then
                    496:            echo "${OPI} Replacing $pkgname"
                    497:            cmd="${MAKE} clean || fail=1"
                    498:            if [ -n "$opt_n" ]; then
                    499:                echo "${OPI} Would run: $cmd"
                    500:            else
                    501:                if [ -n "$logfile" ]; then
                    502:                    eval "$cmd" >&3 2>&3
                    503:                else
                    504:                    eval "$cmd"
                    505:                fi
                    506:                if [ -n "$fail" ]; then
1.26      tnn       507:                     mark_as_failed $pkg
                    508:                    error "'make clean' failed for package $pkg."
1.23      sno       509:                fi
                    510:            fi
1.25      sno       511:            cmd="${MAKE} replace || fail=1" # XXX OLDNAME= support? xmlrpc-c -> xmlrpc-c-ss
1.23      sno       512:        else
                    513:            echo "${OPI} Fetching $pkgname"
                    514:            cmd="${MAKE} fetch depends-fetch || fail=1"
                    515:        fi
                    516:     fi
                    517: 
1.22      sno       518:     if [ -n "$opt_n" -a -z "$fail" ]; then
1.13      tnn       519:        echo "${OPI} Would run: $cmd"
1.22      sno       520:     elif [ -z "$fail" ]; then
                    521:         if [ -n "$logfile" ]; then
                    522:             eval "$cmd" >&3 2>&3
                    523:         else
                    524:             eval "$cmd"
                    525:         fi
                    526:        if [ -n "$fail" ]; then
1.26      tnn       527:             mark_as_failed $pkg
                    528:             error "'make replace' failed for package $pkg."
1.22      sno       529:         fi
1.13      tnn       530:     fi
1.22      sno       531:     if [ -z "$opt_n" -a -z "$opt_k" -a -z "$opt_F" ]; then
1.13      tnn       532:        [ -z "$(${PKG_INFO} -Q unsafe_depends_strict $pkg)" ] || \
                    533:            abort "package $pkg still has unsafe_depends_strict."
                    534:        [ -z "$(${PKG_INFO} -Q unsafe_depends $pkg)" ] || \
                    535:            abort "package $pkg still has unsafe_depends."
                    536:        [ -z "$(${PKG_INFO} -Q rebuild $pkg)" ] || \
                    537:            abort "package $pkg is still requested to be rebuilt."
1.1       gdt       538:     fi
1.18      gdt       539:     # If -r not given, make a binary package.
1.22      sno       540:     if [ -z "$opt_r" -a -z "$fail" -a -z "$opt_F" ]; then
1.13      tnn       541:        echo "${OPI} Packaging $(${PKG_INFO} -e $pkg)"
1.22      sno       542:         cmd="${MAKE} package || fail=1"
                    543:        if [ -n "$opt_n" -a -z "$fail" ]; then
1.13      tnn       544:            echo "${OPI} Would run: $cmd"
1.22      sno       545:        elif [ -z "$fail" ]; then
                    546:             if [ -n "$logfile" ]; then
                    547:                 eval "$cmd" >&3 2>&3
                    548:             else
                    549:                 eval "$cmd"
                    550:             fi
                    551:             if [ -n "$fail" ]; then
1.26      tnn       552:                 mark_as_failed $pkg
                    553:                 error "'make package' failed for package $pkg."
1.22      sno       554:             fi
1.13      tnn       555:        fi
1.1       gdt       556:     fi
1.18      gdt       557:     # Clean
1.22      sno       558:     if [ -z "$opt_n" -a -z "$fail" -a -z "$opt_F" ]; then
                    559:         cmd="${MAKE} clean || fail=1"
                    560:         if [ -n "$logfile" ]; then
                    561:             eval "$cmd" >&3 2>&3
                    562:         else
                    563:             eval "$cmd"
                    564:         fi
                    565:        if [ -n "$fail" ]; then
1.26      tnn       566:             mark_as_failed $pkg
                    567:             error "'make clean' failed for package $pkg."
1.22      sno       568:         fi
                    569:     fi
                    570: 
                    571:     if [ -z "$fail" ]; then
1.26      tnn       572:         mark_as_succeeded $pkg
1.18      gdt       573:     fi
                    574: 
1.1       gdt       575:     sleep 1
                    576: 
                    577:     # remove just-replaced package from all *_TODO lists
                    578:     MISMATCH_TODO=$(exclude $pkg --from $MISMATCH_TODO)
                    579:     REBUILD_TODO=$(exclude $pkg --from $REBUILD_TODO)
                    580:     UNSAFE_TODO=$(exclude $pkg --from $UNSAFE_TODO)
                    581: 
1.13      tnn       582:     echo "${OPI} Re-checking for unsafe installed packages (${UNSAFE_VAR}=YES)"
1.1       gdt       583:     if [ -n "$opt_n" ]; then
                    584:        # With -n, the replace didn't happen, and thus the packages that would
                    585:        # have been marked unsafe_depends=YES were not.  Add the set that
                    586:        # would have been marked so we can watch what pkg_rolling-replace
                    587:        # would have done (approximately).
                    588:         UNSAFE_TODO=$(uniqify $UNSAFE_TODO \
                    589:             $(who_requires $pkg --in-graph $DEPGRAPH_INSTALLED))
                    590:         sleep 1
                    591:     else
1.13      tnn       592:         UNSAFE_TODO=$(check_packages_w_flag ${UNSAFE_VAR})
1.1       gdt       593:     fi
                    594: 
1.22      sno       595:     depgraph_built=0
                    596: 
                    597:     todo
                    598:     vsleep 2
1.1       gdt       599: 
1.22      sno       600:     if [ -n "$logfile" ]; then
                    601:         exec 3>&-
                    602:         kill $TAILPID
                    603:     fi
1.1       gdt       604: done
                    605: 
                    606: echo "${OPI} No more packages to replace; done."
1.22      sno       607: 
                    608: report

CVSweb <webmaster@jp.NetBSD.org>