Annotation of pkgsrc/pkgtools/pkg_rolling-replace/files/pkg_rolling-replace.sh, revision 1.27
1.1 gdt 1: #!/bin/sh
2:
1.27 ! tnn 3: # $NetBSD: pkg_rolling-replace.sh,v 1.26 2010/02/11 12:07:33 tnn Exp $
1.1 gdt 4: #<license>
5: # Copyright (c) 2006 BBN Technologies Corp. All rights reserved.
6: #
7: # Redistribution and use in source and binary forms, with or without
8: # modification, are permitted provided that the following conditions
9: # are met:
10: # 1. Redistributions of source code must retain the above copyright
11: # notice, this list of conditions and the following disclaimer.
12: # 2. Redistributions in binary form must reproduce the above copyright
13: # notice, this list of conditions and the following disclaimer in the
14: # documentation and/or other materials provided with the distribution.
15: # 3. Neither the name of BBN Technologies nor the names of its contributors
16: # may be used to endorse or promote products derived from this software
17: # without specific prior written permission.
18: #
19: # THIS SOFTWARE IS PROVIDED BY BBN TECHNOLOGIES AND CONTRIBUTORS ``AS IS''
20: # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21: # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22: # ARE DISCLAIMED. IN NO EVENT SHALL BBN TECHNOLOGIES OR CONTRIBUTORS BE
23: # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24: # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25: # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26: # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27: # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28: # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29: # POSSIBILITY OF SUCH DAMAGE.
30: #
31: # Effort sponsored in part by the Defense Advanced Research Projects
32: # Agency (DARPA) and the Department of the Interior National Business
33: # Center under agreement number NBCHC050166.
34: #</license>
35:
36: # REVIEW NOTATION LEGEND
37: # XXX marks things that are broken/kludgy
38: # TODO marks things that need to be done
39: # FIXED marks items fixed, needs review and deletion of FIXED comment
40:
41: # Items to be completed for initial release:
42:
43: # TODO: move bulk of help into a real man page.
44:
45: # Items for future work (some imply changes in pkgsrc, not necessarily here)
46: #
47: # Make a pass over all packages for build depends, and rememeber
48: # which packages have been so checked. Check newly unsafe packages.
49: # The current lazy evaluation can perhaps fail to do things in the
50: # right order. Alternatively, explain why the current scheme is safe
51: # and preferred.
52: #
53: # Consider expansion to update via binary packages. This raises
54: # interesting questions about ABIs and binary builds
55: #
56: # Deal with conflicts in a smarter way, perhaps more automatically.
57: # This is hard because just removing packages is not ok.
58: #
59: # Handle foo being split into foo and foo-share. Now, make replace
60: # of foo pulls in foo-share which conflicts with foo. This needlessly
61: # loses.
62: #
63:
1.3 tnn 64: # Substituted by pkgsrc at pre-configure time.
1.4 tnn 65: MAKE="@MAKE@"
1.15 tnn 66: AWK="@AWK@"
1.3 tnn 67:
1.19 apb 68: if [ -z "$MAKECONF" ] ; then
69: for mkconf in "@MAKECONF@" "@PREFIX@/etc/mk.conf" /etc/mk.conf ; do
70: if [ -f "$mkconf" ] ; then
71: MAKECONF="$mkconf"
72: break
73: fi
74: done
75: fi
76: if [ -z "$MAKECONF" -o ! -f "$MAKECONF" ] ; then
77: MAKECONF=/dev/null
78: fi
1.7 tnn 79: test -f "$MAKECONF" && test -z "$PKGSRCDIR" && PKGSRCDIR="` \
80: printf '.include "%s"\n_print_pkgsrcdir:\n\t@echo "${PKGSRCDIR}"\n' \
1.8 tnn 81: "$MAKECONF" | "$MAKE" -f - BSD_PKG_MK=1 _print_pkgsrcdir`"
1.19 apb 82: if [ -z "$PKGSRCDIR" ] ; then
83: for dir in . .. ../.. /usr/pkgsrc ; do
84: if [ -f "${dir}/mk/bsd.pkg.mk" ]; then
85: case "${dir}" in
86: /*) PKGSRCDIR="${dir}" ;;
87: *) PKGSRCDIR="$( cd "${dir}" >/dev/null 2>&1 && pwd )" ;;
88: esac
89: break
90: fi
91: done
92: fi
93: test -z "$PKGSRCDIR" && echo >&2 "Please set PKGSRCDIR" && exit 1
1.12 tnn 94: test -z "$PKG_CHK" && PKG_CHK="@PKG_CHK@"
95: test -z "$PKG_INFO" && PKG_INFO="@PKG_INFO_CMD@"
1.1 gdt 96:
1.19 apb 97: export PKGSRCDIR
98:
1.1 gdt 99: unset PKG_PATH || true #or pkgsrc makefiles will complain
100:
101: usage()
102: {
103: echo "Usage: pkg_rolling-replace [opts]
104: -h This help
1.22 sno 105: -F Fetch sources (including depends) only, don't build
106: -k Keep running, even on error
1.1 gdt 107: -n Don't actually do make replace
1.13 tnn 108: -r Just replace, don't create binary packages
109: -s Replace even if the ABIs are still compatible ("strict")
1.17 apb 110: -u Update outdated packages
1.1 gdt 111: -v Verbose
1.25 sno 112: -D VAR=VAL Passes given variables and values to make
1.22 sno 113: -L <path> Log to path (<path>/pkgdir/pkg)
1.20 wiz 114: -X <pkg> exclude <pkg> from being rebuilt
1.17 apb 115: -x <pkg> exclude <pkg> from outdated check
1.1 gdt 116:
117: pkg_rolling-replace does 'make replace' on one package at a time,
118: tsorting the packages being replaced according to their
119: interdependencies, which avoids most duplicate rebuilds.
120:
121: pkg_rolling-replace can be used in one of two ways:
122:
123: - 'make replace' is unsafe in that, if the replaced package's ABI
124: changes, its dependent packages may break. If this happens, run
125: 'pkg_rolling-replace' (no arguments) to rebuild them against the
126: new version.
127:
128: - 'pkg_chk -u' will delete all your mismatched (outdated)
129: packages, then reinstall them one at a time, leaving you without
130: those packages in the meantime. 'pkg_rolling-replace -u' will
131: instead upgrade them in place, allowing you to keep using your
132: system in the meantime (maybe...if you're lucky...because
133: pkg_rolling-replace replaces the \"deepest\" dependency first,
134: things could still break if that happens to be a fundamental
135: library whose ABI has changed).
136: "
137: exit 1
138: }
139:
140: # pkg_rolling-replace's output is intermingled with pkgsrc make
141: # output. Thus, we use a different prefix. pkgsrc uses '===>' for
142: # major steps, and '=>' for minor ones. Thus, we use 'RR>'.
143:
144: OPI='RR>'
145: OPC='rr>' # continuation
146:
147:
148: # Echo the names of packages needing updates, versions stripped. This
149: # has been tested with pkg_chk 1.76. Older versions are not
150: # supported. Newer versions may or may not work (patches welcome).
151: check_packages_mismatched()
152: {
1.12 tnn 153: ${PKG_CHK} -u -q | while read line; do
1.1 gdt 154: # duplicate output of pkg_chk to stderr (bypass $(...) or `...`)
1.11 tnn 155: echo "${OPC} $line" 1>&2
1.1 gdt 156: # Look for the first thing that looks like pkg-version rather
157: # than category/pkg and remove the version.
158: for word in $line; do
1.5 tnn 159: if [ "$(echo $word | egrep '^[^/]+-[0-9][^-/]*$')" ]; then
160: echo $word | sed 's/-[0-9][^-]*$//'
1.1 gdt 161: break #done with this line
162: fi
163: done
164: done
165: }
166:
167: # usage: check_packages_w_flag flag
168: # echo packages with flag=YES
169: check_packages_w_flag()
170: {
171: _flag=$1; shift
1.12 tnn 172: for pkgver in $(${PKG_INFO} -e '*'); do
173: if ${PKG_INFO} -Bq $pkgver \
1.1 gdt 174: | egrep "^$_flag=[Yy][Ee][Ss]" > /dev/null; then
1.5 tnn 175: echo $pkgver | sed 's/-[0-9][^-]*$//'
1.1 gdt 176: fi
177: done
178: }
179:
180: # echo dep->pkg edges for all installed packages
181: depgraph_installed()
182: {
1.15 tnn 183: ${PKG_INFO} -N '*' | ${AWK} ' \
184: /^Information for/ { \
185: pkg=$3; sub("-[0-9][^-]*:$", "", pkg); \
186: print pkg" "pkg; \
187: state=1; \
188: } \
1.16 gdt 189: /^\** PACKAGE MAY NOT BE DELETED \**$/ { state=3; } \
1.15 tnn 190: /^./ { \
191: if (state == 2) { \
192: dep=$1; sub("-[0-9][^-]*$", "", dep); \
193: print dep" "pkg; \
194: } \
195: } \
196: /^Built using/ { \
197: state=2 \
198: } \
199: '
1.1 gdt 200: }
201:
202: # usage: who_requires pkg --in-graph DEPGRAPH
203: who_requires()
204: {
205: _target=$1; shift
206: test "$1" = '--in-graph' && shift || return $((false))
207:
208: while [ $# -gt 0 ]; do
209: _dep=$1; _pkg=$2; shift 2;
210: if [ $_dep = $_target -a $_dep != $_pkg ]; then
211: echo $_pkg
212: fi
213: done
214: }
215:
216: # usage: is_member x list
217: # return true (0) if x appears in list, false (1) otherwise
218: is_member()
219: {
220: _x="$1"; shift;
221: while [ $# -gt 0 -a "$1" != "$_x" ]; do
222: shift
223: done
224:
225: test $# -gt 0
226: }
227:
228: # usage: exclude list1 --from list2
229: # echo list2 with items from list1 excluded
230: exclude()
231: {
232: _excl=
233: while [ $# -gt 0 -a $1 != "--from" ]; do
234: _excl="$_excl $1"
235: shift
236: done
237: if [ $# -gt 0 ]; then
238: shift #discard '--from'
239: fi
240: while [ $# -gt 0 ]; do
241: is_member $1 $_excl || echo $1
242: shift
243: done
244: }
245:
246: # usage: uniquify list
247: # just does sort -u on list (equiv. to sort | uniq)
248: # CAUTION: reorders list
249: uniqify()
250: {
251: for _x in $*; do echo $_x; done | sort -u
252: }
253:
254: verbose()
255: {
256: if [ -n "$opt_v" ]; then
257: echo "$@"
258: fi
259: }
260:
261: vsleep()
262: {
263: if [ -n "$opt_v" ]; then
264: sleep $1
265: fi
266: }
267:
1.22 sno 268: report()
269: {
1.26 tnn 270: for a in $SUCCEEDED; do
1.22 sno 271: verbose "+ $a"
272: done
273:
274: for a in $FAILED; do
275: verbose "- $a"
276: done
277: }
278:
1.13 tnn 279: abort()
280: {
1.26 tnn 281: echo "*** $1"
282: echo "*** Please read the errors listed above, fix the problem,"
283: echo "*** then re-run pkg_rolling-replace to continue."
284: report
285: exit 1
286: }
287:
288: error()
289: {
290: if [ -n "$opt_k" ]; then
291: abort "$1"
292: fi
293: echo "*** $1"
294: }
295:
296: mark_as_succeeded()
297: {
1.27 ! tnn 298: SUCCEEDED=$(uniqify $SUCCEEDED $1)
1.26 tnn 299: }
300:
301: mark_as_failed()
302: {
1.27 ! tnn 303: FAILED=$(uniqify $FAILED $1)
1.13 tnn 304: }
305:
1.22 sno 306: todo()
307: {
308: if [ -z "$opt_F" ]; then
309: verbose "${OPI} Packages to rebuild:"
310: verbose "${OPC} MISMATCH_TODO=[$(echo $MISMATCH_TODO)]" #strip newlines
311: verbose "${OPC} REBUILD_TODO=[$(echo $REBUILD_TODO)]"
312: verbose "${OPC} UNSAFE_TODO=[$(echo $UNSAFE_TODO)]"
313: REPLACE_TODO=$(uniqify $MISMATCH_TODO $REBUILD_TODO $UNSAFE_TODO)
314: else
315: REPLACE_TODO=$(uniqify $MISMATCH_TODO)
316: verbose "${OPI} Packages to fetch:"
317: verbose "${OPC} MISMATCH_TODO=[$(echo $MISMATCH_TODO)]" #strip newlines
318: fi
319: REPLACE_TODO=$(exclude $REALLYEXCLUDE --from $REPLACE_TODO)
320: if [ -n "$FAILED" ]; then
321: REPLACE_TODO=$(exclude $FAILED --from $REPLACE_TODO)
322: fi
323: vsleep 2
324: }
325:
1.1 gdt 326: ######################################################################
327: ##
328: ## main()
329: ##
330:
331: EXCLUDE=
1.25 sno 332: MAKE_VAR="IN_PKG_ROLLING_REPLACE=1"
333: MAKE_VAR_SEP=" "
1.1 gdt 334:
1.25 sno 335: args=$(getopt FhknursvD:x:X:L: $*)
1.1 gdt 336: if [ $? -ne 0 ]; then
337: opt_h=1
338: fi
339: set -- $args
340: while [ $# -gt 0 ]; do
341: case "$1" in
1.22 sno 342: -F) opt_F=1 ;;
1.1 gdt 343: -h) opt_h=1 ;;
1.22 sno 344: -k) opt_k=1 ;;
1.1 gdt 345: -n) opt_n=1 ;;
1.13 tnn 346: -r) opt_r=1 ;;
347: -s) opt_s=1 ;;
1.1 gdt 348: -u) opt_u=1 ;;
349: -v) opt_v=1 ;;
1.25 sno 350: -D) MAKE_VAR="${MAKE_VAR}${MAKE_VAR_SEP}$2"; MAKE_VAR_SEP=" "; shift ;;
1.1 gdt 351: -x) EXCLUDE="$EXCLUDE $(echo $2 | sed 's/,/ /g')" ; shift ;;
1.17 apb 352: -X) REALLYEXCLUDE="$REALLYEXCLUDE $(echo $2 | sed 's/,/ /g')" ; shift ;;
1.22 sno 353: -L) LOGPATH="$2"; shift ;;
1.1 gdt 354: --) shift; break ;;
355: esac
356: shift
357: done
358:
359: if [ -n "$opt_h" ]; then
360: usage
361: fi
362:
1.13 tnn 363: if [ -n "$opt_s" ]; then
364: UNSAFE_VAR=unsafe_depends_strict
365: else
366: UNSAFE_VAR=unsafe_depends
367: fi
368:
1.25 sno 369: MAKE="${MAKE}${MAKE_VAR_SEP}${MAKE_VAR}"
370:
1.26 tnn 371: SUCCEEDED=""
1.22 sno 372: FAILED=""
373:
1.1 gdt 374: MISMATCH_TODO=
1.22 sno 375: if [ -n "$opt_u" -o -n "$opt_F" ]; then
1.1 gdt 376: echo "${OPI} Checking for mismatched installed packages using pkg_chk"
377: MISMATCH_TODO=$(check_packages_mismatched)
378: echo "${OPI} Excluding the following mismatched packages:"
379: echo "${OPC} EXCLUDE=[$EXCLUDE]"
380: MISMATCH_TODO=$(exclude $EXCLUDE --from $MISMATCH_TODO)
381: fi
382:
1.22 sno 383: if [ -z "$opt_F" ]; then
384: echo "${OPI} Checking for rebuild-requested installed packages (rebuild=YES)"
385: REBUILD_TODO=$(check_packages_w_flag 'rebuild')
1.1 gdt 386:
1.22 sno 387: echo "${OPI} Checking for unsafe installed packages (${UNSAFE_VAR}=YES)"
388: UNSAFE_TODO=$(check_packages_w_flag ${UNSAFE_VAR})
389: fi
1.1 gdt 390:
391: # DEPGRAPH_INSTALLED is rebuilt each round. DEPGRAPH_SRC will collect
392: # edges that we discover using 'make show-depends', but that weren't
393: # listed as depends by the installed version of a package, and
394: # DEPENDS_CHECKED lists packages for which we've already done that
395: # check.
396: DEPGRAPH_INSTALLED=
397: DEPGRAPH_SRC=
398: DEPENDS_CHECKED=
399:
1.22 sno 400: todo
1.1 gdt 401:
402: depgraph_built=0
403:
404: while [ -n "$REPLACE_TODO" ]; do
1.22 sno 405: fail=
406:
1.1 gdt 407: # don't rebuild depgraph if we continued from new-depends step below
408: if [ "$depgraph_built" -eq 0 ]; then
409: echo "${OPI} Building dependency graph for installed packages"
410: DEPGRAPH_INSTALLED=$(depgraph_installed)
411: depgraph_built=1
412: fi
413:
414: echo "${OPI} Tsorting dependency graph"
415: TSORTED=$(echo $DEPGRAPH_INSTALLED $DEPGRAPH_SRC | tsort)
416: for pkg in $TSORTED; do
417: if is_member $pkg $REPLACE_TODO; then
418: break;
419: fi
420: done
1.21 tnn 421: pkgdir=$(${PKG_INFO} -Q PKGPATH $pkg)
1.26 tnn 422: [ -n "$pkgdir" ] || abort "Couldn't extract PKGPATH from installed package $pkg"
423:
1.1 gdt 424: echo "${OPI} Selecting $pkg ($pkgdir) as next package to replace"
425: sleep 1
426:
427: # Newer versions in pkgsrc sometimes have more depends than are
428: # recorded for the installed version (this is entirely to be
429: # expected as packages are split, renamed, and add new features).
430: # When this happens, add the new edges to the graph and re-tsort.
431: # Don't re-tsort if the new edges were already installed once
432: # (otherwise we'll go into a loop).
433:
434: # XXX I'm not sure that DEPENDS_CHECKED is necessary, or whether
435: # simply ignoring new deps that aren't in $REPLACE_TODO would have
436: # been sufficient. The DEPENDS_CHECKED approach causes one extra
437: # tsort in some cases, which isn't overly expensive.
438:
439: # XXX After tsorting and choosing what to 'make replace', we
440: # filter out packages that aren't already installed and marked for
441: # replacement. This is safe, since uninstalled depends will be
442: # pulled in automatically by 'make replace'; but in rare cases it
443: # might be non-optimal, leading to a duplicate rebuild that we
444: # would have avoided had we selected the uninstalled package in
445: # tsorted order and run 'make install' on it. This seems like
446: # such a rare case that the added complexity isn't worth it.
447:
448: if ! is_member $pkg $DEPENDS_CHECKED; then
449: echo "${OPI} Checking if $pkg has new depends..."
1.12 tnn 450: OLD_DEPENDS=$(${PKG_INFO} -Nq $pkg | sed 's/-[0-9][^-]*$//')
1.1 gdt 451: NEW_DEPENDS=
452: cd "$PKGSRCDIR/$pkgdir"
453: bdeps=$(${MAKE} show-depends VARNAME=BUILD_DEPENDS)
454: rdeps=$(${MAKE} show-depends)
455: for depver in $bdeps $rdeps; do
1.10 tnn 456: dep=$(echo $depver | sed -e 's/[:[].*$/0/' -e 's/[<>]=/-/' \
457: -e 's/-[0-9][^-]*$//')
1.1 gdt 458: if ! is_member $dep $OLD_DEPENDS $NEW_DEPENDS; then
459: NEW_DEPENDS="$NEW_DEPENDS $dep"
460: DEPGRAPH_SRC="$DEPGRAPH_SRC $dep $pkg"
461: fi
462: done
463: DEPENDS_CHECKED="$DEPENDS_CHECKED $pkg"
464: if [ -n "$NEW_DEPENDS" ]; then
465: echo "${OPI} $pkg has the following new depends (need to re-tsort):"
466: echo "${OPC} [$(echo $NEW_DEPENDS)]"
467: sleep 2
468: continue
469: fi
470: fi
471:
1.22 sno 472: pkgname=$(${PKG_INFO} -e $pkg)
473: if [ -n "$LOGPATH" ]; then
474: logdir="$LOGPATH/`dirname $pkgdir`"
475: logfile="$logdir/$pkgname"
476: @MKDIR@ "$logdir" || abort "mkdir -p '$logdir' failed"
477: exec 3>"$logfile"
478: tail -f "$logfile" &
479: TAILPID=$!
480: fi
481:
1.1 gdt 482: # Do make replace, with clean before, and package and clean afterwards.
1.13 tnn 483: fail=
1.23 sno 484: if [ -d "$PKGSRCDIR/$pkgdir" ]; then
485: cd "$PKGSRCDIR/$pkgdir";
1.22 sno 486: else
1.26 tnn 487: mark_as_failed $pkg
488: error "No package directory '$pkgdir' for $pkg."
1.22 sno 489: fi
1.23 sno 490:
491: if [ -z "$fail" ]; then
492: if [ -z "$opt_F" ]; then
493: echo "${OPI} Replacing $pkgname"
494: cmd="${MAKE} clean || fail=1"
495: if [ -n "$opt_n" ]; then
496: echo "${OPI} Would run: $cmd"
497: else
498: if [ -n "$logfile" ]; then
499: eval "$cmd" >&3 2>&3
500: else
501: eval "$cmd"
502: fi
503: if [ -n "$fail" ]; then
1.26 tnn 504: mark_as_failed $pkg
505: error "'make clean' failed for package $pkg."
1.23 sno 506: fi
507: fi
1.25 sno 508: cmd="${MAKE} replace || fail=1" # XXX OLDNAME= support? xmlrpc-c -> xmlrpc-c-ss
1.23 sno 509: else
510: echo "${OPI} Fetching $pkgname"
511: cmd="${MAKE} fetch depends-fetch || fail=1"
512: fi
513: fi
514:
1.22 sno 515: if [ -n "$opt_n" -a -z "$fail" ]; then
1.13 tnn 516: echo "${OPI} Would run: $cmd"
1.22 sno 517: elif [ -z "$fail" ]; then
518: if [ -n "$logfile" ]; then
519: eval "$cmd" >&3 2>&3
520: else
521: eval "$cmd"
522: fi
523: if [ -n "$fail" ]; then
1.26 tnn 524: mark_as_failed $pkg
525: error "'make replace' failed for package $pkg."
1.22 sno 526: fi
1.13 tnn 527: fi
1.22 sno 528: if [ -z "$opt_n" -a -z "$opt_k" -a -z "$opt_F" ]; then
1.13 tnn 529: [ -z "$(${PKG_INFO} -Q unsafe_depends_strict $pkg)" ] || \
530: abort "package $pkg still has unsafe_depends_strict."
531: [ -z "$(${PKG_INFO} -Q unsafe_depends $pkg)" ] || \
532: abort "package $pkg still has unsafe_depends."
533: [ -z "$(${PKG_INFO} -Q rebuild $pkg)" ] || \
534: abort "package $pkg is still requested to be rebuilt."
1.1 gdt 535: fi
1.18 gdt 536: # If -r not given, make a binary package.
1.22 sno 537: if [ -z "$opt_r" -a -z "$fail" -a -z "$opt_F" ]; then
1.13 tnn 538: echo "${OPI} Packaging $(${PKG_INFO} -e $pkg)"
1.22 sno 539: cmd="${MAKE} package || fail=1"
540: if [ -n "$opt_n" -a -z "$fail" ]; then
1.13 tnn 541: echo "${OPI} Would run: $cmd"
1.22 sno 542: elif [ -z "$fail" ]; then
543: if [ -n "$logfile" ]; then
544: eval "$cmd" >&3 2>&3
545: else
546: eval "$cmd"
547: fi
548: if [ -n "$fail" ]; then
1.26 tnn 549: mark_as_failed $pkg
550: error "'make package' failed for package $pkg."
1.22 sno 551: fi
1.13 tnn 552: fi
1.1 gdt 553: fi
1.18 gdt 554: # Clean
1.22 sno 555: if [ -z "$opt_n" -a -z "$fail" -a -z "$opt_F" ]; then
556: cmd="${MAKE} clean || fail=1"
557: if [ -n "$logfile" ]; then
558: eval "$cmd" >&3 2>&3
559: else
560: eval "$cmd"
561: fi
562: if [ -n "$fail" ]; then
1.26 tnn 563: mark_as_failed $pkg
564: error "'make clean' failed for package $pkg."
1.22 sno 565: fi
566: fi
567:
568: if [ -z "$fail" ]; then
1.26 tnn 569: mark_as_succeeded $pkg
1.18 gdt 570: fi
571:
1.1 gdt 572: sleep 1
573:
574: # remove just-replaced package from all *_TODO lists
575: MISMATCH_TODO=$(exclude $pkg --from $MISMATCH_TODO)
576: REBUILD_TODO=$(exclude $pkg --from $REBUILD_TODO)
577: UNSAFE_TODO=$(exclude $pkg --from $UNSAFE_TODO)
578:
1.13 tnn 579: echo "${OPI} Re-checking for unsafe installed packages (${UNSAFE_VAR}=YES)"
1.1 gdt 580: if [ -n "$opt_n" ]; then
581: # With -n, the replace didn't happen, and thus the packages that would
582: # have been marked unsafe_depends=YES were not. Add the set that
583: # would have been marked so we can watch what pkg_rolling-replace
584: # would have done (approximately).
585: UNSAFE_TODO=$(uniqify $UNSAFE_TODO \
586: $(who_requires $pkg --in-graph $DEPGRAPH_INSTALLED))
587: sleep 1
588: else
1.13 tnn 589: UNSAFE_TODO=$(check_packages_w_flag ${UNSAFE_VAR})
1.1 gdt 590: fi
591:
1.22 sno 592: depgraph_built=0
593:
594: todo
595: vsleep 2
1.1 gdt 596:
1.22 sno 597: if [ -n "$logfile" ]; then
598: exec 3>&-
599: kill $TAILPID
600: fi
1.1 gdt 601: done
602:
603: echo "${OPI} No more packages to replace; done."
1.22 sno 604:
605: report
CVSweb <webmaster@jp.NetBSD.org>