Annotation of pkgsrc/pkgtools/pkg_rolling-replace/files/pkg_rolling-replace.sh, revision 1.14
1.1 gdt 1: #!/bin/sh
2:
1.14 ! gdt 3: # $NetBSD: pkg_rolling-replace.sh,v 1.13 2007/08/08 11:28:04 tnn Exp $
1.1 gdt 4: #<license>
5: # Copyright (c) 2006 BBN Technologies Corp. All rights reserved.
6: #
7: # Redistribution and use in source and binary forms, with or without
8: # modification, are permitted provided that the following conditions
9: # are met:
10: # 1. Redistributions of source code must retain the above copyright
11: # notice, this list of conditions and the following disclaimer.
12: # 2. Redistributions in binary form must reproduce the above copyright
13: # notice, this list of conditions and the following disclaimer in the
14: # documentation and/or other materials provided with the distribution.
15: # 3. Neither the name of BBN Technologies nor the names of its contributors
16: # may be used to endorse or promote products derived from this software
17: # without specific prior written permission.
18: #
19: # THIS SOFTWARE IS PROVIDED BY BBN TECHNOLOGIES AND CONTRIBUTORS ``AS IS''
20: # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21: # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22: # ARE DISCLAIMED. IN NO EVENT SHALL BBN TECHNOLOGIES OR CONTRIBUTORS BE
23: # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24: # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25: # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26: # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27: # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28: # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29: # POSSIBILITY OF SUCH DAMAGE.
30: #
31: # Effort sponsored in part by the Defense Advanced Research Projects
32: # Agency (DARPA) and the Department of the Interior National Business
33: # Center under agreement number NBCHC050166.
34: #</license>
35:
36: # REVIEW NOTATION LEGEND
37: # XXX marks things that are broken/kludgy
38: # TODO marks things that need to be done
39: # FIXED marks items fixed, needs review and deletion of FIXED comment
40:
41: # Items to be completed for initial release:
42:
43: # TODO: move bulk of help into a real man page.
44:
45: # Items for future work (some imply changes in pkgsrc, not necessarily here)
46: #
47: # Make a pass over all packages for build depends, and rememeber
48: # which packages have been so checked. Check newly unsafe packages.
49: # The current lazy evaluation can perhaps fail to do things in the
50: # right order. Alternatively, explain why the current scheme is safe
51: # and preferred.
52: #
53: # Consider expansion to update via binary packages. This raises
54: # interesting questions about ABIs and binary builds
55: #
56: # Deal with conflicts in a smarter way, perhaps more automatically.
57: # This is hard because just removing packages is not ok.
58: #
59: # Handle foo being split into foo and foo-share. Now, make replace
60: # of foo pulls in foo-share which conflicts with foo. This needlessly
61: # loses.
62: #
63:
1.3 tnn 64: # Substituted by pkgsrc at pre-configure time.
1.4 tnn 65: MAKE="@MAKE@"
1.3 tnn 66:
1.4 tnn 67: test -z "$MAKECONF" && MAKECONF="@MAKECONF@"
1.7 tnn 68: test -f "$MAKECONF" && test -z "$PKGSRCDIR" && PKGSRCDIR="` \
69: printf '.include "%s"\n_print_pkgsrcdir:\n\t@echo "${PKGSRCDIR}"\n' \
1.8 tnn 70: "$MAKECONF" | "$MAKE" -f - BSD_PKG_MK=1 _print_pkgsrcdir`"
1.3 tnn 71: test -z "$PKGSRCDIR" && PKGSRCDIR=/usr/pkgsrc
1.12 tnn 72: test -z "$PKG_CHK" && PKG_CHK="@PKG_CHK@"
73: test -z "$PKG_INFO" && PKG_INFO="@PKG_INFO_CMD@"
1.1 gdt 74:
75: unset PKG_PATH || true #or pkgsrc makefiles will complain
76:
77: usage()
78: {
79: echo "Usage: pkg_rolling-replace [opts]
80: -h This help
81: -n Don't actually do make replace
1.13 tnn 82: -r Just replace, don't create binary packages
83: -s Replace even if the ABIs are still compatible ("strict")
1.1 gdt 84: -u Update mismatched packages
85: -v Verbose
86: -x <pkg> exclude <pkg> from update check
87:
88: pkg_rolling-replace does 'make replace' on one package at a time,
89: tsorting the packages being replaced according to their
90: interdependencies, which avoids most duplicate rebuilds.
91:
92: pkg_rolling-replace can be used in one of two ways:
93:
94: - 'make replace' is unsafe in that, if the replaced package's ABI
95: changes, its dependent packages may break. If this happens, run
96: 'pkg_rolling-replace' (no arguments) to rebuild them against the
97: new version.
98:
99: - 'pkg_chk -u' will delete all your mismatched (outdated)
100: packages, then reinstall them one at a time, leaving you without
101: those packages in the meantime. 'pkg_rolling-replace -u' will
102: instead upgrade them in place, allowing you to keep using your
103: system in the meantime (maybe...if you're lucky...because
104: pkg_rolling-replace replaces the \"deepest\" dependency first,
105: things could still break if that happens to be a fundamental
106: library whose ABI has changed).
107: "
108: exit 1
109: }
110:
111: # pkg_rolling-replace's output is intermingled with pkgsrc make
112: # output. Thus, we use a different prefix. pkgsrc uses '===>' for
113: # major steps, and '=>' for minor ones. Thus, we use 'RR>'.
114:
115: OPI='RR>'
116: OPC='rr>' # continuation
117:
118:
119: # Echo the names of packages needing updates, versions stripped. This
120: # has been tested with pkg_chk 1.76. Older versions are not
121: # supported. Newer versions may or may not work (patches welcome).
122: check_packages_mismatched()
123: {
1.12 tnn 124: ${PKG_CHK} -u -q | while read line; do
1.1 gdt 125: # duplicate output of pkg_chk to stderr (bypass $(...) or `...`)
1.11 tnn 126: echo "${OPC} $line" 1>&2
1.1 gdt 127: # Look for the first thing that looks like pkg-version rather
128: # than category/pkg and remove the version.
129: for word in $line; do
1.5 tnn 130: if [ "$(echo $word | egrep '^[^/]+-[0-9][^-/]*$')" ]; then
131: echo $word | sed 's/-[0-9][^-]*$//'
1.1 gdt 132: break #done with this line
133: fi
134: done
135: done
136: }
137:
138: # usage: check_packages_w_flag flag
139: # echo packages with flag=YES
140: check_packages_w_flag()
141: {
142: _flag=$1; shift
1.12 tnn 143: for pkgver in $(${PKG_INFO} -e '*'); do
144: if ${PKG_INFO} -Bq $pkgver \
1.1 gdt 145: | egrep "^$_flag=[Yy][Ee][Ss]" > /dev/null; then
1.5 tnn 146: echo $pkgver | sed 's/-[0-9][^-]*$//'
1.1 gdt 147: fi
148: done
149: }
150:
151: # echo dep->pkg edges for all installed packages
152: depgraph_installed()
153: {
1.12 tnn 154: for pkgver in $(${PKG_INFO} -e '*'); do
1.5 tnn 155: pkg=$(echo $pkgver | sed 's/-[0-9][^-]*$//')
1.1 gdt 156: # Include $pkg as a node without dependencies in case it has none.
157: echo $pkg $pkg
1.12 tnn 158: for depver in $(${PKG_INFO} -Nq $pkg); do
1.5 tnn 159: dep=$(echo $depver | sed 's/-[0-9][^-]*$//')
1.1 gdt 160: echo $dep $pkg
161: done
162: done
163: }
164:
165: # usage: who_requires pkg --in-graph DEPGRAPH
166: who_requires()
167: {
168: _target=$1; shift
169: test "$1" = '--in-graph' && shift || return $((false))
170:
171: while [ $# -gt 0 ]; do
172: _dep=$1; _pkg=$2; shift 2;
173: if [ $_dep = $_target -a $_dep != $_pkg ]; then
174: echo $_pkg
175: fi
176: done
177: }
178:
179: # usage: is_member x list
180: # return true (0) if x appears in list, false (1) otherwise
181: is_member()
182: {
183: _x="$1"; shift;
184: while [ $# -gt 0 -a "$1" != "$_x" ]; do
185: shift
186: done
187:
188: test $# -gt 0
189: }
190:
191: # usage: exclude list1 --from list2
192: # echo list2 with items from list1 excluded
193: exclude()
194: {
195: _excl=
196: while [ $# -gt 0 -a $1 != "--from" ]; do
197: _excl="$_excl $1"
198: shift
199: done
200: if [ $# -gt 0 ]; then
201: shift #discard '--from'
202: fi
203: while [ $# -gt 0 ]; do
204: is_member $1 $_excl || echo $1
205: shift
206: done
207: }
208:
209: # usage: uniquify list
210: # just does sort -u on list (equiv. to sort | uniq)
211: # CAUTION: reorders list
212: uniqify()
213: {
214: for _x in $*; do echo $_x; done | sort -u
215: }
216:
217: verbose()
218: {
219: if [ -n "$opt_v" ]; then
220: echo "$@"
221: fi
222: }
223:
224: vsleep()
225: {
226: if [ -n "$opt_v" ]; then
227: sleep $1
228: fi
229: }
230:
1.13 tnn 231: abort()
232: {
233: echo "*** $1"
234: echo "*** Please read the errors listed above, fix the problem,"
235: echo "*** then re-run pkg_rolling-replace to continue."
236: exit 1
237: }
238:
1.1 gdt 239: ######################################################################
240: ##
241: ## main()
242: ##
243:
244: EXCLUDE=
245:
1.13 tnn 246: args=$(getopt hnursvx: $*)
1.1 gdt 247: if [ $? -ne 0 ]; then
248: opt_h=1
249: fi
250: set -- $args
251: while [ $# -gt 0 ]; do
252: case "$1" in
253: -h) opt_h=1 ;;
254: -n) opt_n=1 ;;
1.13 tnn 255: -r) opt_r=1 ;;
256: -s) opt_s=1 ;;
1.1 gdt 257: -u) opt_u=1 ;;
258: -v) opt_v=1 ;;
259: -x) EXCLUDE="$EXCLUDE $(echo $2 | sed 's/,/ /g')" ; shift ;;
260: --) shift; break ;;
261: esac
262: shift
263: done
264:
265: if [ -n "$opt_h" ]; then
266: usage
267: fi
268:
1.13 tnn 269: if [ -n "$opt_s" ]; then
270: UNSAFE_VAR=unsafe_depends_strict
271: else
272: UNSAFE_VAR=unsafe_depends
273: fi
274:
1.1 gdt 275: MISMATCH_TODO=
276: if [ -n "$opt_u" ]; then
277: echo "${OPI} Checking for mismatched installed packages using pkg_chk"
278: MISMATCH_TODO=$(check_packages_mismatched)
279: echo "${OPI} Excluding the following mismatched packages:"
280: echo "${OPC} EXCLUDE=[$EXCLUDE]"
281: MISMATCH_TODO=$(exclude $EXCLUDE --from $MISMATCH_TODO)
282: fi
283:
284: echo "${OPI} Checking for rebuild-requested installed packages (rebuild=YES)"
285: REBUILD_TODO=$(check_packages_w_flag 'rebuild')
286:
1.13 tnn 287: echo "${OPI} Checking for unsafe installed packages (${UNSAFE_VAR}=YES)"
288: UNSAFE_TODO=$(check_packages_w_flag ${UNSAFE_VAR})
1.1 gdt 289:
290: # DEPGRAPH_INSTALLED is rebuilt each round. DEPGRAPH_SRC will collect
291: # edges that we discover using 'make show-depends', but that weren't
292: # listed as depends by the installed version of a package, and
293: # DEPENDS_CHECKED lists packages for which we've already done that
294: # check.
295: DEPGRAPH_INSTALLED=
296: DEPGRAPH_SRC=
297: DEPENDS_CHECKED=
298:
299: verbose "${OPI} Packages to rebuild:"
300: verbose "${OPC} MISMATCH_TODO=[$(echo $MISMATCH_TODO)]" #strip newlines
301: verbose "${OPC} REBUILD_TODO=[$(echo $REBUILD_TODO)]"
302: verbose "${OPC} UNSAFE_TODO=[$(echo $UNSAFE_TODO)]"
303: vsleep 2
304:
305: REPLACE_TODO=$(uniqify $MISMATCH_TODO $REBUILD_TODO $UNSAFE_TODO)
306: depgraph_built=0
307:
308: while [ -n "$REPLACE_TODO" ]; do
309: # don't rebuild depgraph if we continued from new-depends step below
310: if [ "$depgraph_built" -eq 0 ]; then
311: echo "${OPI} Building dependency graph for installed packages"
312: DEPGRAPH_INSTALLED=$(depgraph_installed)
313: depgraph_built=1
314: fi
315:
316: echo "${OPI} Tsorting dependency graph"
317: TSORTED=$(echo $DEPGRAPH_INSTALLED $DEPGRAPH_SRC | tsort)
318: for pkg in $TSORTED; do
319: if is_member $pkg $REPLACE_TODO; then
320: break;
321: fi
322: done
1.14 ! gdt 323: pkgdir=$(${PKG_INFO} -Bq $pkg | awk -F= '/PKGPATH=/{print $2}' | sed -e 's/^ //')
1.1 gdt 324: echo "${OPI} Selecting $pkg ($pkgdir) as next package to replace"
325: sleep 1
326:
327: # Newer versions in pkgsrc sometimes have more depends than are
328: # recorded for the installed version (this is entirely to be
329: # expected as packages are split, renamed, and add new features).
330: # When this happens, add the new edges to the graph and re-tsort.
331: # Don't re-tsort if the new edges were already installed once
332: # (otherwise we'll go into a loop).
333:
334: # XXX I'm not sure that DEPENDS_CHECKED is necessary, or whether
335: # simply ignoring new deps that aren't in $REPLACE_TODO would have
336: # been sufficient. The DEPENDS_CHECKED approach causes one extra
337: # tsort in some cases, which isn't overly expensive.
338:
339: # XXX After tsorting and choosing what to 'make replace', we
340: # filter out packages that aren't already installed and marked for
341: # replacement. This is safe, since uninstalled depends will be
342: # pulled in automatically by 'make replace'; but in rare cases it
343: # might be non-optimal, leading to a duplicate rebuild that we
344: # would have avoided had we selected the uninstalled package in
345: # tsorted order and run 'make install' on it. This seems like
346: # such a rare case that the added complexity isn't worth it.
347:
348: if ! is_member $pkg $DEPENDS_CHECKED; then
349: echo "${OPI} Checking if $pkg has new depends..."
1.12 tnn 350: OLD_DEPENDS=$(${PKG_INFO} -Nq $pkg | sed 's/-[0-9][^-]*$//')
1.1 gdt 351: NEW_DEPENDS=
352: cd "$PKGSRCDIR/$pkgdir"
353: bdeps=$(${MAKE} show-depends VARNAME=BUILD_DEPENDS)
354: rdeps=$(${MAKE} show-depends)
355: for depver in $bdeps $rdeps; do
1.10 tnn 356: dep=$(echo $depver | sed -e 's/[:[].*$/0/' -e 's/[<>]=/-/' \
357: -e 's/-[0-9][^-]*$//')
1.1 gdt 358: if ! is_member $dep $OLD_DEPENDS $NEW_DEPENDS; then
359: NEW_DEPENDS="$NEW_DEPENDS $dep"
360: DEPGRAPH_SRC="$DEPGRAPH_SRC $dep $pkg"
361: fi
362: done
363: DEPENDS_CHECKED="$DEPENDS_CHECKED $pkg"
364: if [ -n "$NEW_DEPENDS" ]; then
365: echo "${OPI} $pkg has the following new depends (need to re-tsort):"
366: echo "${OPC} [$(echo $NEW_DEPENDS)]"
367: sleep 2
368: continue
369: fi
370: fi
371:
372: # Do make replace, with clean before, and package and clean afterwards.
1.12 tnn 373: echo "${OPI} Replacing $(${PKG_INFO} -e $pkg)"
1.13 tnn 374: fail=
375: cmd="cd \"$PKGSRCDIR/$pkgdir\" && ${MAKE} clean && ${MAKE} replace || fail=1"
376: if [ -n "$opt_n" ]; then
377: echo "${OPI} Would run: $cmd"
378: else
379: eval "$cmd"
380: [ -z "$fail" ] || abort "'make replace' failed for package $pkg."
381: fi
1.1 gdt 382: if [ -z "$opt_n" ]; then
1.13 tnn 383: [ -z "$(${PKG_INFO} -Q unsafe_depends_strict $pkg)" ] || \
384: abort "package $pkg still has unsafe_depends_strict."
385: [ -z "$(${PKG_INFO} -Q unsafe_depends $pkg)" ] || \
386: abort "package $pkg still has unsafe_depends."
387: [ -z "$(${PKG_INFO} -Q rebuild $pkg)" ] || \
388: abort "package $pkg is still requested to be rebuilt."
1.1 gdt 389: fi
1.13 tnn 390: if [ -z "$opt_r" ]; then
391: echo "${OPI} Packaging $(${PKG_INFO} -e $pkg)"
392: cmd="${MAKE} package && ${MAKE} clean || fail=1"
393: if [ -n "$opt_n" ]; then
394: echo "${OPI} Would run: $cmd"
395: else
396: eval "$cmd"
397: [ -z "$fail" ] || abort "'make package' failed for package $pkg."
398: fi
1.1 gdt 399: fi
400: sleep 1
401:
402: # remove just-replaced package from all *_TODO lists
403: MISMATCH_TODO=$(exclude $pkg --from $MISMATCH_TODO)
404: REBUILD_TODO=$(exclude $pkg --from $REBUILD_TODO)
405: UNSAFE_TODO=$(exclude $pkg --from $UNSAFE_TODO)
406:
1.13 tnn 407: echo "${OPI} Re-checking for unsafe installed packages (${UNSAFE_VAR}=YES)"
1.1 gdt 408: if [ -n "$opt_n" ]; then
409: # With -n, the replace didn't happen, and thus the packages that would
410: # have been marked unsafe_depends=YES were not. Add the set that
411: # would have been marked so we can watch what pkg_rolling-replace
412: # would have done (approximately).
413: UNSAFE_TODO=$(uniqify $UNSAFE_TODO \
414: $(who_requires $pkg --in-graph $DEPGRAPH_INSTALLED))
415: sleep 1
416: else
1.13 tnn 417: UNSAFE_TODO=$(check_packages_w_flag ${UNSAFE_VAR})
1.1 gdt 418: fi
419:
420: verbose "${OPI} Packages to rebuild:"
421: verbose "${OPC} MISMATCH_TODO=[$(echo $MISMATCH_TODO)]" #strips newlines
422: verbose "${OPC} REBUILD_TODO=[$(echo $REBUILD_TODO)]"
423: verbose "${OPC} UNSAFE_TODO=[$(echo $UNSAFE_TODO)]"
424: vsleep 4
425:
426: REPLACE_TODO=$(uniqify $MISMATCH_TODO $REBUILD_TODO $UNSAFE_TODO)
427: depgraph_built=0
428: done
429:
430: echo "${OPI} No more packages to replace; done."
CVSweb <webmaster@jp.NetBSD.org>