Up to [cvs.NetBSD.org] / pkgsrc / net / sslh
Request diff between arbitrary revisions
Keyword substitution: kv
Default branch: MAIN
sslh: update to 2.2.4. v2.2.4: Fix CVE-2025-46806 for "Misaligned Memory Accesses in `is_openvpn_protocol()`" Fix CVE-2025-46807 for "File Descriptor Exhaustion in sslh-select and sslh-ev" Fix potential parsing of undefined data in syslog probe (no CVE assigned) Thanks to Matthias Gerstner of the SUSE security team for the security review that found these defects! v2.2.3: Reverse older commit: version.h cannot be included without breaking the build (everything recompiles every time) and the release archive creation (which relies on git tags). v2.2.2: Fix potential vulnerability similar to CVE-2020-28935 v2.2.1: Added a boolean setting "is_unix" for listen and protocol entries. This will use the 'host' setting as a path name to a socket file, and connections (listening or connecting) will be performed on Unix socket instead of Internet sockets. Support HAProxy's proxyprotocol on the backend server side. Lots of documentation about a new, simpler way to perform transparent proxying. New "verbose" option that overrides all other verbose settings. v2.1.3: Fix Landlock access to /etc/hosts.deny and /etc/hosts.allow. v2.1.2: Fix inetd mode. v2.1.1: Various minor fixes. v2.1.0: Support for the Landlock LSM. After initial setup, sslh gives up all local file access rights. Reintroduced --ssl as an alias to --tls. Introduce autoconf to adapt to landlock presence. Close connexion without error message if remote client forcefully closes connexion, for Windows. v2.0.1: Fix resolve_on_forward setting, which would crash sslh reliably. v2.0.0: v2.0: New sslh-ev: this is functionally equivalent to sslh-select (mono-process, only forks for specified protocols), but based on libev, which should make it scalable to large numbers of connections. New log system: instead of --verbose with arbitrary levels, there are now several message classes. Each message class can be set to go to stderr, syslog, or both. Classes are documented in example.cfg. UDP connections are now managed in a hash to avoid linear searches. The downside is that the number of UDP connections is a hard limit, configurable with the 'udp_max_connections', which defaults to 1024. Timeouts are managed with lists. inetd merges stderr output to what is sent to the client, which is a security issue as it might give information to an attacker. When inetd is activated, stderr is forcibly closed. New protocol-level option `resolve_on_forward`, requests that target names are resolved at each connection instead of at startup. Useful for dynamic DNS situations. (Paul Schroeder/milkpirate) New probe for MSRDP (akappner).
net/sslh: update to 1.21 v1.21 Added TCP_FASTOPEN support for client sockets (if tfo_ok is specified in their configuration) and for listenint socket, if all client protocols support it. (Craig Andrews) Added 'minlength' option to skip a probe if less than that many bytes have been received (mostly for regex) Moved configuration and command-line management to use conf2struct. Hopefully this should be transparent to users. Update Let's Encrypt entry in example.cfg for tls-alpn-01 challenges; tls-sni-* challenges are now deprecated. Log to syslog even if in foreground (for people who use fail2ban) Use syslog_facility: "none" to disable syslog output. v1.21b Added TCP_FASTOPEN support for client sockets (if tfo_ok is specified in their configuration) and for listenint socket, if all client protocols support it. (Craig Andrews) Added 'minlength' option to skip a probe if less than that many bytes have been received (mostly for regex) Moved configuration and command-line management to use conf2struct. Changes are: * command line option <-F|--config> no longer defaults to /etc/sslh.cfg, so you have to specify it explicitly. * command line option <-v|--verbose> takes a mandatory integer parameter Update Let's Encrypt entry in example.cfg for tls-alpn-01 challenges; tls-sni-* challenges are now deprecated. Log to syslog even if in foreground (for people who use fail2ban) Use syslog_facility: "none" to disable syslog output. Changed exit code for illegal command line parameter from 1 to 6 (for testing purposes) v1.21c Removed support for 'ssl' and fix a related segfault bug. (use tls instead of ssl)
Fix packaging. More files installed, so bump PKGREVISION.
Update sslh to 1.16. Patch provided by Nils Ratusznik in PR pkg/49257.
Changelog for sslh is the following :
v1.16: 11FEB2014
Probes made more resilient, to incoming data containing NULLs. Also made
them behave properly when receiving too short packets to probe on the
first incoming packet.
(Ondrej KuznÃk)
Libcap support: Keep only CAP_NET_ADMIN if started as root with
transparent proxying and dropping priviledges (enable USELIBCAP in
Makefile). This avoids having to mess with filesystem capabilities.
(Sebastian Schmidt/yath)
Fixed bugs related to getpeername that would cause sslh to quit
erroneously (getpeername can return actual errors if connections are
dropped before getting to getpeername).
Set IP_FREEDBIND if available to bind to addresses that don't yet exist.
Changelog for pkgsrc :
- now uses Github for fetching source, ${HOMEPAGE} says : "sslh is
managed in Git and pushed to Github" ;
- replaced #!/bin/bash with #!/bin/sh in genver.sh, choice of sh instead
of bash is because of a commit in sslh github :
https://github.com/yrutschle/sslh/commit/62cbb55b8e9c9b0bc878b094c5be815d58276b39
Remove example rc.d scripts from PLISTs. These are now handled dynamically if INIT_SYSTEM is set to "rc.d", or ignored otherwise.
Upate sslh to 1.15. Based on PR pkg/48320 by Nils Ratusznik. Pkgsrc change: * add startup script. ChangeLog: v1.15: 27JUL2013 Added --transparent option for transparent proxying. See README for iptables magic and capability management. Fixed bug in sslh-select: if number of opened file descriptor became bigger than FD_SETSIZE, bad things would happen. Fixed bug in sslh-select: if socket dropped while defered_data was present, sslh-select would crash. Increased FD_SETSIZE for Cygwin, as the default 64 is too low for even moderate load. v1.14: 21DEC2012 Corrected OpenVPN probe to support pre-shared secret mode (OpenVPN port-sharing code is... wrong). Thanks to Kai Ellinger for help in investigating and testing. Added an actual TLS/SSL probe. Added configurable --on-timeout protocol specification. Added a --anyprot protocol probe (equivalent to what --ssl was). Makefile respects the user's compiler and CFLAG choices (falling back to the current values if undefined), as well as LDFLAGS. (Michael Palimaka) Added "After" and "KillMode" to systemd.sslh.service (Thomas Weißschuh). Added LSB tags to etc.init.d.sslh (Thomas Varis). v1.13: 18MAY2012 Write PID file before dropping privileges. Added --background, which overrides 'foreground' configuration file setting. Added example systemd service file from Archlinux in scripts/ https://projects.archlinux.org/svntogit/community.git/tree/trunk/sslh.service?h=packages/sslh (Sébastien Luttringer) v1.12: 08MAY2012 Added support for configuration file. New protocol probes can be defined using regular expressions that match the first packet sent by the client. sslh now connects timed out connections to the first configured protocol instead of 'ssh' (just make sure ssh is the first defined protocol). sslh now tries protocols in the order in which they are defined (just make sure sslh is the last defined protocol). v1.11: 21APR2012 WARNING: defaults have been removed for --user and --pidfile options, update your start-up scripts! No longer stop sslh when reverse DNS requests fail for logging. Added HTTP probe. No longer create new session if running in foreground. No longer default to changing user to 'nobody'. If --user isn't specified, just run as current user. No longer create PID file by default, it should be explicitely set with --pidfile. No longer log to syslog if in foreground. Logs are instead output to stderr. The four changes above make it straightforward to integrate sslh with systemd, and should help with launchd. v1.10: 27NOV2011 Fixed calls referring to sockaddr length so they work with FreeBSD. Try target addresses in turn until one works if there are several (e.g. "localhost:22" resolves to an IPv6 address and an IPv4 address and sshd does not listen on IPv6). Fixed sslh-fork so killing the head process kills the listener processes. Heavily cleaned up test suite. Added stress test t_load script. Added coverage (requires lcov). Support for XMPP (Arnaud Gendre). Updated README.MacOSX (Aaron Madlon-Kay). v1.9: 02AUG2011 WARNING: This version does not work with FreeBSD and derivatives! WARNING: Options changed, you'll need to update your start-up scripts! Log format changed, you'll need to update log processing scripts! Now supports IPv6 throughout (both on listening and forwarding) Logs now contain IPv6 addresses, local forwarding address, and resolves names (unless --numeric is specified). Introduced long options. Options -l, -s and -o replaced by their long counterparts. Defaults for SSL and SSH options suppressed (it's legitimate to want to use sslh to mux OpenVPN and tinc while not caring about SSH nor SSL). Bind to multiple addresses with multiple -p options. Support for tinc VPN (experimental). Numeric logging option. v1.8: 15JUL2011 Changed log format to make it possible to link connections to subsequent logs from other services. Updated CentOS init.d script (Andre Krajnik). Fixed zombie issue with OpenBSD (The SA_NOCLDWAIT flag is not propagated to the child process, so we set up signals after the fork.) (François FRITZ) Added -o "OpenVPN" and OpenVPN probing and support. Added single-threaded, select(2)-based version. Added support for "Bold" SSH clients (clients that speak first) Thanks to Guillaume Ricaud for spotting a regression bug. Added -f "foreground" option. Added test suite. (only tests connexions. No test for libwrap, setsid, setuid and so on) and corresponding 'make test' target. Added README.MacOSX (thanks Aaron Madlon-Kay) Documented use with proxytunnel and corkscrew in README.
Add sslh-1.7a. sslh lets one accept both HTTPS and SSH connections on the same port.