Annotation of pkgsrc/lang/python/pyversion.mk, revision 1.174

1.174   ! gdt         1: # $NetBSD: pyversion.mk,v 1.173 2025/07/22 14:30:26 gdt Exp $
1.44      rillig      2: 
1.171     gdt         3: # This file provides an interface to decide which version of python
                      4: # should be used in building a package.  It should be directly
                      5: # included by packages as a way to depend on python when none of the
                      6: # other methods are appropriate, e.g. a package that produces a binary
                      7: # that embeds python.  It is indirectly included by the other methods.
                      8: #
                      9: # There are three kinds of python versions:
1.173     gdt        10: #   - 2.7: Very old, and only usable if explicitly marked as supported.
                     11: #   - old 3.x: Usable if explicitly marked as supported and requested,
1.174   ! gdt        12: #     but not part of defaults because too many packages fail,
1.171     gdt        13: #     and it's painful for no gain to have to explicitly exclude it.
1.174   ! gdt        14: #   - current 3.x: Usable unless a package is specifically marked.
        !            15: #     Includes the default version, older versions not yet too
        !            16: #     troublesome, and often a version newer than default.
1.171     gdt        17: #
1.172     gdt        18: # The value of "current 3.x" is defined by the default value of
1.174   ! gdt        19: # PYTHON_VERSIONS_ACCEPTED.
1.172     gdt        20: #
1.173     gdt        21: # For any given package, there are a set of python3 versions that one
                     22: # can use with the upstream code, and perhaps a reduced version that
                     23: # pkgsrc chooses to use, often due to dependencies in pkgsrc not
                     24: # supporting an older version.  The set of versions is expressed in
                     25: # one of several ways, but not a mixture:
                     26: #  - No variables set, meaning that the supported versions are exactly
1.174   ! gdt        27: #    those in the default value of PYTHON_VERSIONS_ACCEPTED.
1.173     gdt        28: #  - PYTHON_VERSIONS_ACCEPTED set, meaning that is the set of
                     29: #    buildable versions.  This can include values not in the default,
                     30: #    and it can omit values in the default.
                     31: #  - PYTHON_VERSIONS_INCOMPATIBLE set, meaning that the set of
                     32: #    buildable versions is the default value of
                     33: #    PYTHON_VERSIONS_ACCEPTED, minus the INCOMPATIBLE versions.  This
1.174   ! gdt        34: #    is preferred when omitting a specific old or new version, so that
        !            35: #    as versions are added and removed from DEFAULT, the set updates.
1.173     gdt        36: # NB: If a version is in the ACCEPTED set, that version must also be
                     37: # in the ACCEPTED set of every (recursive) dependency.
1.172     gdt        38: #
1.171     gdt        39: # The general plan for version selection (ignoring 2.7) is:
                     40: #   - If PYTHON_VERSION_REQD is set, choose it (and fail if not in
                     41: #       PYTHON_VERSIONS_ACCEPTED).
                     42: #   - If PYTHON_VERSION_DEFAULT is in PYTHON_VERSIONS_ACCEPTED, choose
                     43: #     it.
                     44: #   - Otherwise, choose the first version in PYTHON_VERSIONS_ACCEPTED.
                     45: #
                     46: # With 2.7, 27 is considered included in PYTHON_VERSIONS_ACCEPTED if
                     47: # PYTHON_27_ACCEPTED is defined.  If so, then:
                     48: #   - If PYTHON_VERSION_REQD is 27, 27 is used.
                     49: #   - If PYTHON_VERSION_DEFAULT is not in PYTHON_VERSIONS_ACCEPTED,
                     50: #     then the highest version in ACCEPTED is chosen.  (For a package
                     51: #     that supports only 27, this will be 27.)
1.44      rillig     52: #
1.48      rillig     53: # === User-settable variables ===
1.44      rillig     54: #
                     55: # PYTHON_VERSION_DEFAULT
1.172     gdt        56: #      The preferred Python version to use.  Typical use is to move
                     57: #      to a newer version before pkgsrc moves.  Another possible use
                     58: #      is to stay on an older version when pkgsrc advances.
1.171     gdt        59: #      
1.172     gdt        60: #      Reasonable values: Default value of PYTHON_VERSIONS_ACCEPTED.
1.171     gdt        61: #      Possible values: Reasonable values and "old 3.x".
1.163     wiz        62: #      Default: 312
1.44      rillig     63: #
1.104     cheusov    64: # === Infrastructure variables ===
                     65: #
1.101     cheusov    66: # PYTHON_VERSION_REQD
1.171     gdt        67: #      Python version to use. This variable should not be set by the
                     68: #      user or in packages.  Normally it is used by bulk build tools,
                     69: #      or e.g. as "make PYTHON_VERSION_REQD=311 replace".
1.101     cheusov    70: #
                     71: #      Possible: ${PYTHON_VERSIONS_ACCEPTED}
                     72: #      Default:  ${PYTHON_VERSION_DEFAULT}
                     73: #
1.48      rillig     74: # === Package-settable variables ===
1.44      rillig     75: #
                     76: # PYTHON_VERSIONS_ACCEPTED
1.171     gdt        77: #      The Python versions that can be used to build the package.
                     78: #      Order is significant, with the first feasible value chosen;
                     79: #      normal practice is to list all feasible versions in decreasing
                     80: #      order.
1.44      rillig     81: #
1.171     gdt        82: #      Possible values: 313 312 311
1.170     wiz        83: #      Default: 313 312 311
1.92      joerg      84: #
1.171     gdt        85: # PYTHON_27_ACCEPTED
                     86: #       Set if the package can build with 2.7.  (27 should not be
                     87: #       placed in PYTHON_VERSIONS_ACCEPTED.)
                     88: #
1.44      rillig     89: # PYTHON_VERSIONS_INCOMPATIBLE
1.171     gdt        90: #      The Python versions that cannot be used to build the package.
                     91: #      Any "current 3.x" version that fails to build and work must be
                     92: #      listed.  "Old 3.x" versions may be listed, and if present
                     93: #      should not be pruned (as long as the old lang/pythonNN version
                     94: #      is in pkgsrc).  However it is not a consequential error if it
                     95: #      is missing, as those are not built by default in bulk builds.
                     96: #      (27 should not be listed as incompatible, as that's true
                     97: #      unless PYTHON_27_ACCEPTED is set.)
1.44      rillig     98: #
1.171     gdt        99: #      Possible values: 39 310 311 312 313
1.113     wiz       100: #      Default: (empty)
1.44      rillig    101: #
                    102: # PYTHON_FOR_BUILD_ONLY
                    103: #      Whether Python is needed only at build time or at run time.
                    104: #
1.125     ryoon     105: #      Possible values: yes no test tool
1.108     riastrad  106: #      Default: no
1.44      rillig    107: #
1.103     cheusov   108: # PYTHON_SELF_CONFLICT
                    109: #      If set to "yes", additional CONFLICTS entries are added for
1.153     gdt       110: #      registering a conflict between pyNN-<modulename> packages,
                    111: #      covering all versions.  (Expressing CONFLICTS that are limited
                    112: #      to some versions must be done with a hand-written CONFLICTS
                    113: #      entry.)
1.103     cheusov   114: #
                    115: #      Possible values: yes no
                    116: #      Default: no
                    117: #
1.52      rillig    118: # === Defined variables ===
                    119: #
1.148     wiz       120: # PYTHON_VERSION
                    121: #      Version of python that will be used in this build, as
                    122: #      a three-digit number of major_version * 100 + minor_version.
                    123: #
1.166     adam      124: #      Examples: 207, 309, 310, 311, 312, 313
1.148     wiz       125: #
1.52      rillig    126: # PYPKGPREFIX
                    127: #      The prefix to use in PKGNAME for extensions which are meant
                    128: #      to be installed for multiple Python versions.
                    129: #
1.163     wiz       130: #      Example: py312
1.52      rillig    131: #
                    132: # PYVERSSUFFIX
                    133: #      The suffix to executables and in the library path, equal to
                    134: #      sys.version[0:3].
                    135: #
1.163     wiz       136: #      Example: 3.12
1.52      rillig    137: #
1.46      rillig    138: # Keywords: python
                    139: #
1.2       drochner  140: 
                    141: .if !defined(PYTHON_PYVERSION_MK)
                    142: PYTHON_PYVERSION_MK=   defined
1.1       drochner  143: 
1.66      joerg     144: # derive a python version from the package name if possible
                    145: # optionally handled quoted package names
                    146: .if defined(PKGNAME_REQD) && !empty(PKGNAME_REQD:Mpy[0-9][0-9]-*) || \
                    147:     defined(PKGNAME_REQD) && !empty(PKGNAME_REQD:M*-py[0-9][0-9]-*)
1.121     rillig    148: PYTHON_VERSION_REQD?=  ${PKGNAME_REQD:C/(^.*-|^)py([0-9][0-9])-.*/\2/}
1.146     markd     149: .elif defined(PKGNAME_REQD) && !empty(PKGNAME_REQD:Mpy[0-9][0-9][0-9]-*) || \
                    150:     defined(PKGNAME_REQD) && !empty(PKGNAME_REQD:M*-py[0-9][0-9][0-9]-*)
                    151: PYTHON_VERSION_REQD?=  ${PKGNAME_REQD:C/(^.*-|^)py([0-9][0-9][0-9])-.*/\2/}
1.66      joerg     152: .elif defined(PKGNAME_OLD) && !empty(PKGNAME_OLD:Mpy[0-9][0-9]-*) || \
                    153:       defined(PKGNAME_OLD) && !empty(PKGNAME_OLD:M*-py[0-9][0-9]-*)
1.121     rillig    154: PYTHON_VERSION_REQD?=  ${PKGNAME_OLD:C/(^.*-|^)py([0-9][0-9])-.*/\2/}
1.146     markd     155: .elif defined(PKGNAME_OLD) && !empty(PKGNAME_OLD:Mpy[0-9][0-9][0-9]-*) || \
                    156:       defined(PKGNAME_OLD) && !empty(PKGNAME_OLD:M*-py[0-9][0-9][0-9]-*)
                    157: PYTHON_VERSION_REQD?=  ${PKGNAME_OLD:C/(^.*-|^)py([0-9][0-9][0-9])-.*/\2/}
1.66      joerg     158: .endif
                    159: 
1.168     tnn       160: .include "../../mk/bsd.fast.prefs.mk"
1.1       drochner  161: 
1.46      rillig    162: BUILD_DEFS+=           PYTHON_VERSION_DEFAULT
                    163: BUILD_DEFS_EFFECTS+=   PYPACKAGE
                    164: 
1.163     wiz       165: PYTHON_VERSION_DEFAULT?=               312
1.170     wiz       166: PYTHON_VERSIONS_ACCEPTED?=             313 312 311
1.160     wiz       167: .if defined(PYTHON_27_ACCEPTED)
                    168: PYTHON_VERSIONS_ACCEPTED+=             27
                    169: .endif
1.56      joerg     170: PYTHON_VERSIONS_INCOMPATIBLE?=         # empty by default
                    171: 
1.1       drochner  172: # transform the list into individual variables
                    173: .for pv in ${PYTHON_VERSIONS_ACCEPTED}
1.121     rillig    174: .  if empty(PYTHON_VERSIONS_INCOMPATIBLE:M${pv})
1.1       drochner  175: _PYTHON_VERSION_${pv}_OK=      yes
1.56      joerg     176: _PYTHON_VERSIONS_ACCEPTED+=    ${pv}
1.121     rillig    177: .  endif
1.1       drochner  178: .endfor
                    179: 
                    180: #
                    181: # choose a python version where to add,
                    182: # try to be intelligent
                    183: #
1.136     gutterid  184: # if a version is explicitly required, take it
1.2       drochner  185: .if defined(PYTHON_VERSION_REQD)
1.40      joerg     186: # but check if it is acceptable first, error out otherwise
1.121     rillig    187: .  if defined(_PYTHON_VERSION_${PYTHON_VERSION_REQD}_OK)
1.2       drochner  188: _PYTHON_VERSION=       ${PYTHON_VERSION_REQD}
1.121     rillig    189: .  endif
1.40      joerg     190: .else
                    191: # if the default is accepted, it is first choice
1.121     rillig    192: .  if !defined(_PYTHON_VERSION)
                    193: .    if defined(_PYTHON_VERSION_${PYTHON_VERSION_DEFAULT}_OK)
1.1       drochner  194: _PYTHON_VERSION=       ${PYTHON_VERSION_DEFAULT}
1.121     rillig    195: .    endif
                    196: .  endif
1.1       drochner  197: # prefer an already installed version, in order of "accepted"
1.121     rillig    198: .  if !defined(_PYTHON_VERSION)
                    199: .    for pv in ${PYTHON_VERSIONS_ACCEPTED}
                    200: .      if defined(_PYTHON_VERSION_${pv}_OK)
1.1       drochner  201: _PYTHON_VERSION?=      ${pv}
1.121     rillig    202: .      endif
                    203: .    endfor
                    204: .  endif
1.1       drochner  205: .endif
1.40      joerg     206: 
1.87      wiz       207: #
                    208: # Variable assignment for multi-python packages
                    209: MULTI+=        PYTHON_VERSION_REQD=${_PYTHON_VERSION}
                    210: 
1.40      joerg     211: # No supported version found, annotate to simplify statements below.
1.1       drochner  212: .if !defined(_PYTHON_VERSION)
1.40      joerg     213: _PYTHON_VERSION=       none
1.148     wiz       214: # since no supported version is found and no build will happen,
                    215: # choose a numeric default
                    216: PYTHON_VERSION=                0
1.115     obache    217: PKG_FAIL_REASON+=      "No valid Python version"
1.142     gdt       218: PYPKGPREFIX=           none
                    219: PYVERSSUFFIX=          none
1.148     wiz       220: .else
                    221: PYTHON_VERSION=                ${_PYTHON_VERSION:C/^(.)(.)$/\10\2/}
1.1       drochner  222: .endif
                    223: 
1.103     cheusov   224: # Additional CONFLICTS
                    225: .if ${PYTHON_SELF_CONFLICT:U:tl} == "yes"
1.121     rillig    226: .  for i in ${PYTHON_VERSIONS_ACCEPTED:N${_PYTHON_VERSION}}
1.134     nia       227: .    if empty(PYTHON_VERSIONS_INCOMPATIBLE:M${i})
1.121     rillig    228: CONFLICTS+=    ${PKGNAME:S/py${_PYTHON_VERSION}/py${i}/:C/-[0-9].*$/-[0-9]*/}
1.134     nia       229: .    endif
1.121     rillig    230: .  endfor
1.103     cheusov   231: .endif # PYCONFLICTS
                    232: 
                    233: #
1.100     drochner  234: PLIST_VARS+=   py2x py3x
                    235: 
1.115     obache    236: .if empty(_PYTHON_VERSION:Mnone)
1.121     rillig    237: PYPACKAGE=                             python${_PYTHON_VERSION}
                    238: PYVERSSUFFIX=                          ${_PYTHON_VERSION:C/^([0-9])/\1./1}
                    239: BUILDLINK_API_DEPENDS.${PYPACKAGE}?=   ${PYPACKAGE}>=${PYVERSSUFFIX}
                    240: PYPKGSRCDIR=                           ../../lang/${PYPACKAGE}
1.149     riastrad  241: PYDEPENDENCY=                          ${BUILDLINK_API_DEPENDS.${PYPACKAGE}:=:${PYPKGSRCDIR}}
1.121     rillig    242: PYPKGPREFIX=                           py${_PYTHON_VERSION}
1.115     obache    243: .endif
1.114     obache    244: .if !empty(_PYTHON_VERSION:M3*)
1.121     rillig    245: PLIST.py3x=                            yes
1.114     obache    246: .endif
                    247: .if !empty(_PYTHON_VERSION:M2*)
1.121     rillig    248: PLIST.py2x=                            yes
1.1       drochner  249: .endif
1.5       drochner  250: 
1.38      rillig    251: PTHREAD_OPTS+= require
1.33      jlam      252: .include "../../mk/pthread.buildlink3.mk"
1.38      rillig    253: 
1.109     riastrad  254: PYTHON_FOR_BUILD_ONLY?=                no
1.37      kristerw  255: .if defined(PYPKGSRCDIR)
1.108     riastrad  256: .  if !empty(PYTHON_FOR_BUILD_ONLY:M[tT][oO][oO][lL])
                    257: TOOL_DEPENDS+=                 ${PYDEPENDENCY}
1.125     ryoon     258: .  elif !empty(PYTHON_FOR_BUILD_ONLY:M[tT][eE][sS][tT])
                    259: TEST_DEPENDS+=                 ${PYDEPENDENCY}
1.107     riastrad  260: .  else
1.108     riastrad  261: .    if !empty(PYTHON_FOR_BUILD_ONLY:M[yY][eE][sS])
                    262: BUILDLINK_DEPMETHOD.python?=   build
1.169     jperkin   263: .    else
                    264: BUILDLINK_DEPMETHOD.python?=   full
1.108     riastrad  265: .    endif
1.107     riastrad  266: .    include "${PYPKGSRCDIR}/buildlink3.mk"
1.167     riastrad  267: .    if ${USE_CROSS_COMPILE:tl} == "yes"
1.150     riastrad  268: TOOL_DEPENDS+=                 ${PYDEPENDENCY}
                    269: MAKE_ENV+=                     PYTHONPATH=${WRKDIR:Q}/.pysite:${_CROSS_DESTDIR:Q}${LOCALBASE:Q}/${PYLIB:Q}
                    270: pre-configure: ${WRKDIR}/.pysite/sitecustomize.py
1.151     riastrad  271: .include "${PYPKGSRCDIR}/platname.mk"
1.150     riastrad  272: ${WRKDIR}/.pysite/sitecustomize.py:
                    273:        @${STEP_MSG} "Creating Python sitecustomize.py for cross-compiling"
                    274:        ${RUN} ${MKDIR} ${.TARGET:H}
                    275:        ${RUN} ( \
                    276:                ${ECHO} "import sys" && \
1.151     riastrad  277:                ${PRINTF} "sys.platform = '%s'\\n" ${PY_PLATNAME:Q} && \
1.150     riastrad  278:                for v in \
                    279:                        sys.base_exec_prefix \
                    280:                        sys.base_prefix \
                    281:                        sys.exec_prefix \
                    282:                        sys.prefix \
                    283:                ; do \
                    284:                        ${PRINTF} "%s = '%s'\\n" "$$v" ${LOCALBASE:Q}; \
                    285:                done; \
                    286:        ) >${.TARGET}.tmp
                    287:        ${RUN} ${MV} -f ${.TARGET}.tmp ${.TARGET}
                    288: .    endif
1.107     riastrad  289: .  endif
1.37      kristerw  290: .endif
1.11      jlam      291: 
                    292: PYTHONBIN=     ${LOCALBASE}/bin/python${PYVERSSUFFIX}
1.150     riastrad  293: TOOL_PYTHONBIN=        ${TOOLBASE}/bin/python${PYVERSSUFFIX}
                    294: .if exists(${TOOL_PYTHONBIN}m)
                    295: PYTHONCONFIG=  ${TOOLBASE}/bin/python${PYVERSSUFFIX}m-config
1.127     markd     296: .else
1.150     riastrad  297: PYTHONCONFIG=  ${TOOLBASE}/bin/python${PYVERSSUFFIX}-config
1.127     markd     298: .endif
1.73      joerg     299: PY_COMPILE_ALL= \
1.150     riastrad  300:        ${TOOL_PYTHONBIN} ${PREFIX}/lib/python${PYVERSSUFFIX}/compileall.py -q
1.73      joerg     301: PY_COMPILE_O_ALL= \
1.150     riastrad  302:        ${TOOL_PYTHONBIN} -O ${PREFIX}/lib/python${PYVERSSUFFIX}/compileall.py -q
1.11      jlam      303: 
1.139     adam      304: PYINC=         include/python${PYVERSSUFFIX}
                    305: PYLIB=         lib/python${PYVERSSUFFIX}
                    306: PYSITELIB=     ${PYLIB}/site-packages
1.72      joerg     307: 
1.161     hauke     308: # Expect paths directly under PREFIX, but allow for ${PLIST.*} prefix(es)
                    309: PRINT_PLIST_AWK+=      /(^|^\$$.+\})${PYINC:S|/|\\/|g}/ \
1.82      obache    310:                        { gsub(/${PYINC:S|/|\\/|g}/, "$${PYINC}") }
1.161     hauke     311: PRINT_PLIST_AWK+=      /(^|^\$$.+\})${PYSITELIB:S|/|\\/|g}/ \
1.82      obache    312:                        { gsub(/${PYSITELIB:S|/|\\/|g}/, "$${PYSITELIB}") }
1.161     hauke     313: PRINT_PLIST_AWK+=      /(^|^\$$.+\})${PYLIB:S|/|\\/|g}/ \
1.82      obache    314:                        { gsub(/${PYLIB:S|/|\\/|g}/, "$${PYLIB}") }
1.2       drochner  315: 
1.150     riastrad  316: ALL_ENV+=              PYTHON=${TOOL_PYTHONBIN}
1.147     gdt       317: .if defined(USE_CMAKE) || defined(BUILD_USES_CMAKE)
1.135     nia       318: # used by FindPython
1.164     wiz       319: CMAKE_CONFIGURE_ARGS+=         -DPython_EXECUTABLE:FILEPATH=${TOOL_PYTHONBIN}
                    320: CMAKE_CONFIGURE_ARGS+=         -DPython_INCLUDE_DIR:PATH=${BUILDLINK_DIR}/${PYINC}
1.135     nia       321: # used by FindPython2
                    322: .  if !empty(_PYTHON_VERSION:M2*)
1.164     wiz       323: CMAKE_CONFIGURE_ARGS+=         -DPython2_EXECUTABLE:FILEPATH=${TOOL_PYTHONBIN}
                    324: CMAKE_CONFIGURE_ARGS+=         -DPython2_INCLUDE_DIR:PATH=${BUILDLINK_DIR}/${PYINC}
1.135     nia       325: .  endif
                    326: # used by FindPython3
                    327: .  if !empty(_PYTHON_VERSION:M3*)
1.164     wiz       328: CMAKE_CONFIGURE_ARGS+=         -DPython3_EXECUTABLE:FILEPATH=${TOOL_PYTHONBIN}
                    329: CMAKE_CONFIGURE_ARGS+=         -DPython3_INCLUDE_DIR:PATH=${BUILDLINK_DIR}/${PYINC}
1.135     nia       330: .  endif
1.80      drochner  331: # used by FindPythonInterp.cmake and FindPythonLibs.cmake
1.164     wiz       332: CMAKE_CONFIGURE_ARGS+=         -DPYVERSSUFFIX:STRING=${PYVERSSUFFIX}
1.116     dbj       333: # set this explicitly, as by default it will prefer the built in framework
1.126     bsiegert  334: # on Darwin
1.164     wiz       335: CMAKE_CONFIGURE_ARGS+=         -DPYTHON_INCLUDE_DIR:PATH=${BUILDLINK_DIR}/${PYINC}
                    336: CMAKE_CONFIGURE_ARGS+=         -DPYTHON_INCLUDE_PATH:PATH=${BUILDLINK_DIR}/${PYINC}
                    337: CMAKE_CONFIGURE_ARGS+=         -DPYTHON_EXECUTABLE:FILEPATH=${TOOL_PYTHONBIN}
1.80      drochner  338: .endif
1.47      rillig    339: 
1.131     rillig    340: _VARGROUPS+=           pyversion
                    341: _USER_VARS.pyversion=  PYTHON_VERSION_DEFAULT
                    342: _PKG_VARS.pyversion=   \
                    343:        PYTHON_VERSIONS_ACCEPTED PYTHON_VERSIONS_INCOMPATIBLE           \
1.147     gdt       344:        PYTHON_SELF_CONFLICT PYTHON_FOR_BUILD_ONLY USE_CMAKE BUILD_USES_CMAKE
1.131     rillig    345: _SYS_VARS.pyversion=   \
1.161     hauke     346:        PYTHON_VERSION PYTHON_VERSION_REQD PYPACKAGE PYVERSSUFFIX       \
                    347:        PYPKGSRCDIR PYPKGPREFIX PYTHONBIN PYTHONCONFIG PY_COMPILE_ALL   \
1.164     wiz       348:        PY_COMPILE_O_ALL PYINC PYLIB PYSITELIB CMAKE_CONFIGURE_ARGS             \
1.150     riastrad  349:        TOOL_PYTHONBIN
1.131     rillig    350: _USE_VARS.pyversion=   \
                    351:        PKGNAME_REQD PKGNAME_OLD LOCALBASE PREFIX BUILDLINK_DIR PKGNAME
                    352: _DEF_VARS.pyversion=   \
                    353:        CONFLICTS MULTI PLIST_VARS BUILDLINK_API_DEPENDS.${PYPACKAGE}   \
                    354:        PYDEPENDENCY PLIST.py2x PLIST.py3x PTHREAD_OPTS TOOL_DEPENDS    \
                    355:        TEST_DEPENDS BUILDLINK_DEPMETHOD.python PRINT_PLIST_AWK ALL_ENV \
                    356:        _PYTHON_VERSIONS_ACCEPTED _PYTHON_VERSION
                    357: _IGN_VARS.pyversion=   _PYTHON_*
                    358: _LISTED_VARS.pyversion=        *_ARGS
                    359: _SORTED_VARS.pyversion=        *_DEPENDS *_ENV
                    360: 
1.2       drochner  361: .endif # PYTHON_PYVERSION_MK

CVSweb <webmaster@jp.NetBSD.org>