Annotation of pkgsrc/lang/python/pyversion.mk, revision 1.173

1.173   ! gdt         1: # $NetBSD: pyversion.mk,v 1.172 2025/07/22 12:24:28 gdt Exp $
1.44      rillig      2: 
1.171     gdt         3: # This file provides an interface to decide which version of python
                      4: # should be used in building a package.  It should be directly
                      5: # included by packages as a way to depend on python when none of the
                      6: # other methods are appropriate, e.g. a package that produces a binary
                      7: # that embeds python.  It is indirectly included by the other methods.
                      8: #
                      9: # There are three kinds of python versions:
1.173   ! gdt        10: #   - 2.7: Very old, and only usable if explicitly marked as supported.
        !            11: #   - old 3.x: Usable if explicitly marked as supported and requested,
1.171     gdt        12: #     but globally disabled by default because too many packages fail,
                     13: #     and it's painful for no gain to have to explicitly exclude it.
                     14: #     Bulk builds do not build these versions.
1.173   ! gdt        15: #   - current 3.x: Usable unless marked as not accepted.  Includes the
1.171     gdt        16: #     default version, older versions not yet too troublesome, and
                     17: #     often a version newer than default.
                     18: #
1.172     gdt        19: # The value of "current 3.x" is defined by the default value of
                     20: # PYTHON_VERSIONS_ACCEPTED.  pbulk uses this set to determine which
                     21: # python versions are built during a bulk build.
                     22: #
1.173   ! gdt        23: # For any given package, there are a set of python3 versions that one
        !            24: # can use with the upstream code, and perhaps a reduced version that
        !            25: # pkgsrc chooses to use, often due to dependencies in pkgsrc not
        !            26: # supporting an older version.  The set of versions is expressed in
        !            27: # one of several ways, but not a mixture:
        !            28: #  - No variables set, meaning that the supported versions are exactly
        !            29: #   those in the default value of PYTHON_VERSIONS_ACCEPTED.
        !            30: #  - PYTHON_VERSIONS_ACCEPTED set, meaning that is the set of
        !            31: #    buildable versions.  This can include values not in the default,
        !            32: #    and it can omit values in the default.
        !            33: #  - PYTHON_VERSIONS_INCOMPATIBLE set, meaning that the set of
        !            34: #    buildable versions is the default value of
        !            35: #    PYTHON_VERSIONS_ACCEPTED, minus the INCOMPATIBLE versions.  This
        !            36: #    is preferred when omitting a specific old version, so that when a
        !            37: #    new version is added, it is included.
        !            38: # NB: If a version is in the ACCEPTED set, that version must also be
        !            39: # in the ACCEPTED set of every (recursive) dependency.
1.172     gdt        40: #
1.171     gdt        41: # The general plan for version selection (ignoring 2.7) is:
                     42: #   - If PYTHON_VERSION_REQD is set, choose it (and fail if not in
                     43: #       PYTHON_VERSIONS_ACCEPTED).
                     44: #   - If PYTHON_VERSION_DEFAULT is in PYTHON_VERSIONS_ACCEPTED, choose
                     45: #     it.
                     46: #   - Otherwise, choose the first version in PYTHON_VERSIONS_ACCEPTED.
                     47: #
                     48: # With 2.7, 27 is considered included in PYTHON_VERSIONS_ACCEPTED if
                     49: # PYTHON_27_ACCEPTED is defined.  If so, then:
                     50: #   - If PYTHON_VERSION_REQD is 27, 27 is used.
                     51: #   - If PYTHON_VERSION_DEFAULT is not in PYTHON_VERSIONS_ACCEPTED,
                     52: #     then the highest version in ACCEPTED is chosen.  (For a package
                     53: #     that supports only 27, this will be 27.)
1.44      rillig     54: #
1.48      rillig     55: # === User-settable variables ===
1.44      rillig     56: #
                     57: # PYTHON_VERSION_DEFAULT
1.172     gdt        58: #      The preferred Python version to use.  Typical use is to move
                     59: #      to a newer version before pkgsrc moves.  Another possible use
                     60: #      is to stay on an older version when pkgsrc advances.
1.171     gdt        61: #      
1.172     gdt        62: #      Reasonable values: Default value of PYTHON_VERSIONS_ACCEPTED.
1.171     gdt        63: #      Possible values: Reasonable values and "old 3.x".
1.163     wiz        64: #      Default: 312
1.44      rillig     65: #
1.104     cheusov    66: # === Infrastructure variables ===
                     67: #
1.101     cheusov    68: # PYTHON_VERSION_REQD
1.171     gdt        69: #      Python version to use. This variable should not be set by the
                     70: #      user or in packages.  Normally it is used by bulk build tools,
                     71: #      or e.g. as "make PYTHON_VERSION_REQD=311 replace".
1.101     cheusov    72: #
                     73: #      Possible: ${PYTHON_VERSIONS_ACCEPTED}
                     74: #      Default:  ${PYTHON_VERSION_DEFAULT}
                     75: #
1.48      rillig     76: # === Package-settable variables ===
1.44      rillig     77: #
                     78: # PYTHON_VERSIONS_ACCEPTED
1.171     gdt        79: #      The Python versions that can be used to build the package.
                     80: #      Order is significant, with the first feasible value chosen;
                     81: #      normal practice is to list all feasible versions in decreasing
                     82: #      order.
1.44      rillig     83: #
1.171     gdt        84: #      Possible values: 313 312 311
1.170     wiz        85: #      Default: 313 312 311
1.92      joerg      86: #
1.171     gdt        87: # PYTHON_27_ACCEPTED
                     88: #       Set if the package can build with 2.7.  (27 should not be
                     89: #       placed in PYTHON_VERSIONS_ACCEPTED.)
                     90: #
1.44      rillig     91: # PYTHON_VERSIONS_INCOMPATIBLE
1.171     gdt        92: #      The Python versions that cannot be used to build the package.
                     93: #      Any "current 3.x" version that fails to build and work must be
                     94: #      listed.  "Old 3.x" versions may be listed, and if present
                     95: #      should not be pruned (as long as the old lang/pythonNN version
                     96: #      is in pkgsrc).  However it is not a consequential error if it
                     97: #      is missing, as those are not built by default in bulk builds.
                     98: #      (27 should not be listed as incompatible, as that's true
                     99: #      unless PYTHON_27_ACCEPTED is set.)
1.44      rillig    100: #
1.171     gdt       101: #      Possible values: 39 310 311 312 313
1.113     wiz       102: #      Default: (empty)
1.44      rillig    103: #
                    104: # PYTHON_FOR_BUILD_ONLY
                    105: #      Whether Python is needed only at build time or at run time.
                    106: #
1.125     ryoon     107: #      Possible values: yes no test tool
1.108     riastrad  108: #      Default: no
1.44      rillig    109: #
1.103     cheusov   110: # PYTHON_SELF_CONFLICT
                    111: #      If set to "yes", additional CONFLICTS entries are added for
1.153     gdt       112: #      registering a conflict between pyNN-<modulename> packages,
                    113: #      covering all versions.  (Expressing CONFLICTS that are limited
                    114: #      to some versions must be done with a hand-written CONFLICTS
                    115: #      entry.)
1.103     cheusov   116: #
                    117: #      Possible values: yes no
                    118: #      Default: no
                    119: #
1.52      rillig    120: # === Defined variables ===
                    121: #
1.148     wiz       122: # PYTHON_VERSION
                    123: #      Version of python that will be used in this build, as
                    124: #      a three-digit number of major_version * 100 + minor_version.
                    125: #
1.166     adam      126: #      Examples: 207, 309, 310, 311, 312, 313
1.148     wiz       127: #
1.52      rillig    128: # PYPKGPREFIX
                    129: #      The prefix to use in PKGNAME for extensions which are meant
                    130: #      to be installed for multiple Python versions.
                    131: #
1.163     wiz       132: #      Example: py312
1.52      rillig    133: #
                    134: # PYVERSSUFFIX
                    135: #      The suffix to executables and in the library path, equal to
                    136: #      sys.version[0:3].
                    137: #
1.163     wiz       138: #      Example: 3.12
1.52      rillig    139: #
1.46      rillig    140: # Keywords: python
                    141: #
1.2       drochner  142: 
                    143: .if !defined(PYTHON_PYVERSION_MK)
                    144: PYTHON_PYVERSION_MK=   defined
1.1       drochner  145: 
1.66      joerg     146: # derive a python version from the package name if possible
                    147: # optionally handled quoted package names
                    148: .if defined(PKGNAME_REQD) && !empty(PKGNAME_REQD:Mpy[0-9][0-9]-*) || \
                    149:     defined(PKGNAME_REQD) && !empty(PKGNAME_REQD:M*-py[0-9][0-9]-*)
1.121     rillig    150: PYTHON_VERSION_REQD?=  ${PKGNAME_REQD:C/(^.*-|^)py([0-9][0-9])-.*/\2/}
1.146     markd     151: .elif defined(PKGNAME_REQD) && !empty(PKGNAME_REQD:Mpy[0-9][0-9][0-9]-*) || \
                    152:     defined(PKGNAME_REQD) && !empty(PKGNAME_REQD:M*-py[0-9][0-9][0-9]-*)
                    153: PYTHON_VERSION_REQD?=  ${PKGNAME_REQD:C/(^.*-|^)py([0-9][0-9][0-9])-.*/\2/}
1.66      joerg     154: .elif defined(PKGNAME_OLD) && !empty(PKGNAME_OLD:Mpy[0-9][0-9]-*) || \
                    155:       defined(PKGNAME_OLD) && !empty(PKGNAME_OLD:M*-py[0-9][0-9]-*)
1.121     rillig    156: PYTHON_VERSION_REQD?=  ${PKGNAME_OLD:C/(^.*-|^)py([0-9][0-9])-.*/\2/}
1.146     markd     157: .elif defined(PKGNAME_OLD) && !empty(PKGNAME_OLD:Mpy[0-9][0-9][0-9]-*) || \
                    158:       defined(PKGNAME_OLD) && !empty(PKGNAME_OLD:M*-py[0-9][0-9][0-9]-*)
                    159: PYTHON_VERSION_REQD?=  ${PKGNAME_OLD:C/(^.*-|^)py([0-9][0-9][0-9])-.*/\2/}
1.66      joerg     160: .endif
                    161: 
1.168     tnn       162: .include "../../mk/bsd.fast.prefs.mk"
1.1       drochner  163: 
1.46      rillig    164: BUILD_DEFS+=           PYTHON_VERSION_DEFAULT
                    165: BUILD_DEFS_EFFECTS+=   PYPACKAGE
                    166: 
1.163     wiz       167: PYTHON_VERSION_DEFAULT?=               312
1.170     wiz       168: PYTHON_VERSIONS_ACCEPTED?=             313 312 311
1.160     wiz       169: .if defined(PYTHON_27_ACCEPTED)
                    170: PYTHON_VERSIONS_ACCEPTED+=             27
                    171: .endif
1.56      joerg     172: PYTHON_VERSIONS_INCOMPATIBLE?=         # empty by default
                    173: 
1.1       drochner  174: # transform the list into individual variables
                    175: .for pv in ${PYTHON_VERSIONS_ACCEPTED}
1.121     rillig    176: .  if empty(PYTHON_VERSIONS_INCOMPATIBLE:M${pv})
1.1       drochner  177: _PYTHON_VERSION_${pv}_OK=      yes
1.56      joerg     178: _PYTHON_VERSIONS_ACCEPTED+=    ${pv}
1.121     rillig    179: .  endif
1.1       drochner  180: .endfor
                    181: 
                    182: #
                    183: # choose a python version where to add,
                    184: # try to be intelligent
                    185: #
1.136     gutterid  186: # if a version is explicitly required, take it
1.2       drochner  187: .if defined(PYTHON_VERSION_REQD)
1.40      joerg     188: # but check if it is acceptable first, error out otherwise
1.121     rillig    189: .  if defined(_PYTHON_VERSION_${PYTHON_VERSION_REQD}_OK)
1.2       drochner  190: _PYTHON_VERSION=       ${PYTHON_VERSION_REQD}
1.121     rillig    191: .  endif
1.40      joerg     192: .else
                    193: # if the default is accepted, it is first choice
1.121     rillig    194: .  if !defined(_PYTHON_VERSION)
                    195: .    if defined(_PYTHON_VERSION_${PYTHON_VERSION_DEFAULT}_OK)
1.1       drochner  196: _PYTHON_VERSION=       ${PYTHON_VERSION_DEFAULT}
1.121     rillig    197: .    endif
                    198: .  endif
1.1       drochner  199: # prefer an already installed version, in order of "accepted"
1.121     rillig    200: .  if !defined(_PYTHON_VERSION)
                    201: .    for pv in ${PYTHON_VERSIONS_ACCEPTED}
                    202: .      if defined(_PYTHON_VERSION_${pv}_OK)
1.1       drochner  203: _PYTHON_VERSION?=      ${pv}
1.121     rillig    204: .      endif
                    205: .    endfor
                    206: .  endif
1.1       drochner  207: .endif
1.40      joerg     208: 
1.87      wiz       209: #
                    210: # Variable assignment for multi-python packages
                    211: MULTI+=        PYTHON_VERSION_REQD=${_PYTHON_VERSION}
                    212: 
1.40      joerg     213: # No supported version found, annotate to simplify statements below.
1.1       drochner  214: .if !defined(_PYTHON_VERSION)
1.40      joerg     215: _PYTHON_VERSION=       none
1.148     wiz       216: # since no supported version is found and no build will happen,
                    217: # choose a numeric default
                    218: PYTHON_VERSION=                0
1.115     obache    219: PKG_FAIL_REASON+=      "No valid Python version"
1.142     gdt       220: PYPKGPREFIX=           none
                    221: PYVERSSUFFIX=          none
1.148     wiz       222: .else
                    223: PYTHON_VERSION=                ${_PYTHON_VERSION:C/^(.)(.)$/\10\2/}
1.1       drochner  224: .endif
                    225: 
1.103     cheusov   226: # Additional CONFLICTS
                    227: .if ${PYTHON_SELF_CONFLICT:U:tl} == "yes"
1.121     rillig    228: .  for i in ${PYTHON_VERSIONS_ACCEPTED:N${_PYTHON_VERSION}}
1.134     nia       229: .    if empty(PYTHON_VERSIONS_INCOMPATIBLE:M${i})
1.121     rillig    230: CONFLICTS+=    ${PKGNAME:S/py${_PYTHON_VERSION}/py${i}/:C/-[0-9].*$/-[0-9]*/}
1.134     nia       231: .    endif
1.121     rillig    232: .  endfor
1.103     cheusov   233: .endif # PYCONFLICTS
                    234: 
                    235: #
1.100     drochner  236: PLIST_VARS+=   py2x py3x
                    237: 
1.115     obache    238: .if empty(_PYTHON_VERSION:Mnone)
1.121     rillig    239: PYPACKAGE=                             python${_PYTHON_VERSION}
                    240: PYVERSSUFFIX=                          ${_PYTHON_VERSION:C/^([0-9])/\1./1}
                    241: BUILDLINK_API_DEPENDS.${PYPACKAGE}?=   ${PYPACKAGE}>=${PYVERSSUFFIX}
                    242: PYPKGSRCDIR=                           ../../lang/${PYPACKAGE}
1.149     riastrad  243: PYDEPENDENCY=                          ${BUILDLINK_API_DEPENDS.${PYPACKAGE}:=:${PYPKGSRCDIR}}
1.121     rillig    244: PYPKGPREFIX=                           py${_PYTHON_VERSION}
1.115     obache    245: .endif
1.114     obache    246: .if !empty(_PYTHON_VERSION:M3*)
1.121     rillig    247: PLIST.py3x=                            yes
1.114     obache    248: .endif
                    249: .if !empty(_PYTHON_VERSION:M2*)
1.121     rillig    250: PLIST.py2x=                            yes
1.1       drochner  251: .endif
1.5       drochner  252: 
1.38      rillig    253: PTHREAD_OPTS+= require
1.33      jlam      254: .include "../../mk/pthread.buildlink3.mk"
1.38      rillig    255: 
1.109     riastrad  256: PYTHON_FOR_BUILD_ONLY?=                no
1.37      kristerw  257: .if defined(PYPKGSRCDIR)
1.108     riastrad  258: .  if !empty(PYTHON_FOR_BUILD_ONLY:M[tT][oO][oO][lL])
                    259: TOOL_DEPENDS+=                 ${PYDEPENDENCY}
1.125     ryoon     260: .  elif !empty(PYTHON_FOR_BUILD_ONLY:M[tT][eE][sS][tT])
                    261: TEST_DEPENDS+=                 ${PYDEPENDENCY}
1.107     riastrad  262: .  else
1.108     riastrad  263: .    if !empty(PYTHON_FOR_BUILD_ONLY:M[yY][eE][sS])
                    264: BUILDLINK_DEPMETHOD.python?=   build
1.169     jperkin   265: .    else
                    266: BUILDLINK_DEPMETHOD.python?=   full
1.108     riastrad  267: .    endif
1.107     riastrad  268: .    include "${PYPKGSRCDIR}/buildlink3.mk"
1.167     riastrad  269: .    if ${USE_CROSS_COMPILE:tl} == "yes"
1.150     riastrad  270: TOOL_DEPENDS+=                 ${PYDEPENDENCY}
                    271: MAKE_ENV+=                     PYTHONPATH=${WRKDIR:Q}/.pysite:${_CROSS_DESTDIR:Q}${LOCALBASE:Q}/${PYLIB:Q}
                    272: pre-configure: ${WRKDIR}/.pysite/sitecustomize.py
1.151     riastrad  273: .include "${PYPKGSRCDIR}/platname.mk"
1.150     riastrad  274: ${WRKDIR}/.pysite/sitecustomize.py:
                    275:        @${STEP_MSG} "Creating Python sitecustomize.py for cross-compiling"
                    276:        ${RUN} ${MKDIR} ${.TARGET:H}
                    277:        ${RUN} ( \
                    278:                ${ECHO} "import sys" && \
1.151     riastrad  279:                ${PRINTF} "sys.platform = '%s'\\n" ${PY_PLATNAME:Q} && \
1.150     riastrad  280:                for v in \
                    281:                        sys.base_exec_prefix \
                    282:                        sys.base_prefix \
                    283:                        sys.exec_prefix \
                    284:                        sys.prefix \
                    285:                ; do \
                    286:                        ${PRINTF} "%s = '%s'\\n" "$$v" ${LOCALBASE:Q}; \
                    287:                done; \
                    288:        ) >${.TARGET}.tmp
                    289:        ${RUN} ${MV} -f ${.TARGET}.tmp ${.TARGET}
                    290: .    endif
1.107     riastrad  291: .  endif
1.37      kristerw  292: .endif
1.11      jlam      293: 
                    294: PYTHONBIN=     ${LOCALBASE}/bin/python${PYVERSSUFFIX}
1.150     riastrad  295: TOOL_PYTHONBIN=        ${TOOLBASE}/bin/python${PYVERSSUFFIX}
                    296: .if exists(${TOOL_PYTHONBIN}m)
                    297: PYTHONCONFIG=  ${TOOLBASE}/bin/python${PYVERSSUFFIX}m-config
1.127     markd     298: .else
1.150     riastrad  299: PYTHONCONFIG=  ${TOOLBASE}/bin/python${PYVERSSUFFIX}-config
1.127     markd     300: .endif
1.73      joerg     301: PY_COMPILE_ALL= \
1.150     riastrad  302:        ${TOOL_PYTHONBIN} ${PREFIX}/lib/python${PYVERSSUFFIX}/compileall.py -q
1.73      joerg     303: PY_COMPILE_O_ALL= \
1.150     riastrad  304:        ${TOOL_PYTHONBIN} -O ${PREFIX}/lib/python${PYVERSSUFFIX}/compileall.py -q
1.11      jlam      305: 
1.139     adam      306: PYINC=         include/python${PYVERSSUFFIX}
                    307: PYLIB=         lib/python${PYVERSSUFFIX}
                    308: PYSITELIB=     ${PYLIB}/site-packages
1.72      joerg     309: 
1.161     hauke     310: # Expect paths directly under PREFIX, but allow for ${PLIST.*} prefix(es)
                    311: PRINT_PLIST_AWK+=      /(^|^\$$.+\})${PYINC:S|/|\\/|g}/ \
1.82      obache    312:                        { gsub(/${PYINC:S|/|\\/|g}/, "$${PYINC}") }
1.161     hauke     313: PRINT_PLIST_AWK+=      /(^|^\$$.+\})${PYSITELIB:S|/|\\/|g}/ \
1.82      obache    314:                        { gsub(/${PYSITELIB:S|/|\\/|g}/, "$${PYSITELIB}") }
1.161     hauke     315: PRINT_PLIST_AWK+=      /(^|^\$$.+\})${PYLIB:S|/|\\/|g}/ \
1.82      obache    316:                        { gsub(/${PYLIB:S|/|\\/|g}/, "$${PYLIB}") }
1.2       drochner  317: 
1.150     riastrad  318: ALL_ENV+=              PYTHON=${TOOL_PYTHONBIN}
1.147     gdt       319: .if defined(USE_CMAKE) || defined(BUILD_USES_CMAKE)
1.135     nia       320: # used by FindPython
1.164     wiz       321: CMAKE_CONFIGURE_ARGS+=         -DPython_EXECUTABLE:FILEPATH=${TOOL_PYTHONBIN}
                    322: CMAKE_CONFIGURE_ARGS+=         -DPython_INCLUDE_DIR:PATH=${BUILDLINK_DIR}/${PYINC}
1.135     nia       323: # used by FindPython2
                    324: .  if !empty(_PYTHON_VERSION:M2*)
1.164     wiz       325: CMAKE_CONFIGURE_ARGS+=         -DPython2_EXECUTABLE:FILEPATH=${TOOL_PYTHONBIN}
                    326: CMAKE_CONFIGURE_ARGS+=         -DPython2_INCLUDE_DIR:PATH=${BUILDLINK_DIR}/${PYINC}
1.135     nia       327: .  endif
                    328: # used by FindPython3
                    329: .  if !empty(_PYTHON_VERSION:M3*)
1.164     wiz       330: CMAKE_CONFIGURE_ARGS+=         -DPython3_EXECUTABLE:FILEPATH=${TOOL_PYTHONBIN}
                    331: CMAKE_CONFIGURE_ARGS+=         -DPython3_INCLUDE_DIR:PATH=${BUILDLINK_DIR}/${PYINC}
1.135     nia       332: .  endif
1.80      drochner  333: # used by FindPythonInterp.cmake and FindPythonLibs.cmake
1.164     wiz       334: CMAKE_CONFIGURE_ARGS+=         -DPYVERSSUFFIX:STRING=${PYVERSSUFFIX}
1.116     dbj       335: # set this explicitly, as by default it will prefer the built in framework
1.126     bsiegert  336: # on Darwin
1.164     wiz       337: CMAKE_CONFIGURE_ARGS+=         -DPYTHON_INCLUDE_DIR:PATH=${BUILDLINK_DIR}/${PYINC}
                    338: CMAKE_CONFIGURE_ARGS+=         -DPYTHON_INCLUDE_PATH:PATH=${BUILDLINK_DIR}/${PYINC}
                    339: CMAKE_CONFIGURE_ARGS+=         -DPYTHON_EXECUTABLE:FILEPATH=${TOOL_PYTHONBIN}
1.80      drochner  340: .endif
1.47      rillig    341: 
1.131     rillig    342: _VARGROUPS+=           pyversion
                    343: _USER_VARS.pyversion=  PYTHON_VERSION_DEFAULT
                    344: _PKG_VARS.pyversion=   \
                    345:        PYTHON_VERSIONS_ACCEPTED PYTHON_VERSIONS_INCOMPATIBLE           \
1.147     gdt       346:        PYTHON_SELF_CONFLICT PYTHON_FOR_BUILD_ONLY USE_CMAKE BUILD_USES_CMAKE
1.131     rillig    347: _SYS_VARS.pyversion=   \
1.161     hauke     348:        PYTHON_VERSION PYTHON_VERSION_REQD PYPACKAGE PYVERSSUFFIX       \
                    349:        PYPKGSRCDIR PYPKGPREFIX PYTHONBIN PYTHONCONFIG PY_COMPILE_ALL   \
1.164     wiz       350:        PY_COMPILE_O_ALL PYINC PYLIB PYSITELIB CMAKE_CONFIGURE_ARGS             \
1.150     riastrad  351:        TOOL_PYTHONBIN
1.131     rillig    352: _USE_VARS.pyversion=   \
                    353:        PKGNAME_REQD PKGNAME_OLD LOCALBASE PREFIX BUILDLINK_DIR PKGNAME
                    354: _DEF_VARS.pyversion=   \
                    355:        CONFLICTS MULTI PLIST_VARS BUILDLINK_API_DEPENDS.${PYPACKAGE}   \
                    356:        PYDEPENDENCY PLIST.py2x PLIST.py3x PTHREAD_OPTS TOOL_DEPENDS    \
                    357:        TEST_DEPENDS BUILDLINK_DEPMETHOD.python PRINT_PLIST_AWK ALL_ENV \
                    358:        _PYTHON_VERSIONS_ACCEPTED _PYTHON_VERSION
                    359: _IGN_VARS.pyversion=   _PYTHON_*
                    360: _LISTED_VARS.pyversion=        *_ARGS
                    361: _SORTED_VARS.pyversion=        *_DEPENDS *_ENV
                    362: 
1.2       drochner  363: .endif # PYTHON_PYVERSION_MK

CVSweb <webmaster@jp.NetBSD.org>