Annotation of pkgsrc/lang/python/files/Setup, revision 1.2
1.1 tron 1: # -*- makefile -*-
2: # The file Setup is used by the makesetup script to construct the files
3: # Makefile and config.c, from Makefile.pre and config.c.in,
4: # respectively. The file Setup itself is initially copied from
5: # Setup.in; once it exists it will not be overwritten, so you can edit
6: # Setup to your heart's content. Note that Makefile.pre is created
7: # from Makefile.pre.in by the toplevel configure script.
8:
9: # (VPATH notes: Setup and Makefile.pre are in the build directory, as
10: # are Makefile and config.c; the *.in files are in the source
11: # directory.)
12:
13: # Each line in this file describes one or more optional modules.
14: # Comment out lines to suppress modules.
15: # Lines have the following structure:
16: #
17: # <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
18: #
19: # <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
20: # <cpparg> is anything starting with -I, -D, -U or -C
21: # <library> is anything ending in .a or beginning with -l or -L
22: # <module> is anything else but should be a valid Python
23: # identifier (letters, digits, underscores, beginning with non-digit)
24: #
25: # (As the makesetup script changes, it may recognize some other
26: # arguments as well, e.g. *.so and *.sl as libraries. See the big
27: # case statement in the makesetup script.)
28: #
29: # Lines can also have the form
30: #
31: # <name> = <value>
32: #
33: # which defines a Make variable definition inserted into Makefile.in
34: #
35: # Finally, if a line contains just the word "*shared*" (without the
36: # quotes but with the stars), then the following modules will not be
37: # included in the config.c file, nor in the list of objects to be
38: # added to the library archive, and their linker options won't be
39: # added to the linker options, but rules to create their .o files and
40: # their shared libraries will still be added to the Makefile, and
41: # their names will be collected in the Make variable SHAREDMODS. This
42: # is used to build modules as shared libraries. (They must be
43: # installed using "make sharedinstall".) (For compatibility,
44: # *noconfig* has the same effect as *shared*.)
45:
46: # NOTE: As a standard policy, as many modules as can be supported by a
47: # platform should be present. The distribution comes with all modules
48: # enabled that are supported by most platforms and don't require you
49: # to ftp sources from elsewhere.
50:
51:
52: # Some special rules to define PYTHONPATH.
53: # Edit the definitions below to indicate which options you are using.
54: # Don't add any whitespace or comments!
55:
56: # Directories where library files get installed.
57: # DESTLIB is for Python modules; MACHDESTLIB for shared libraries.
58: DESTLIB=$(LIBDEST)
59: MACHDESTLIB=$(BINLIBDEST)
60:
61: # NOTE: all the paths are now relative to the prefix that is computed
62: # at run time!
63:
64: # Standard path -- don't edit.
65: # No leading colon since this is the first entry.
66: # Empty since this is now just the runtime prefix.
67: DESTPATH=
68:
69: # Site specific path components -- should begin with : if non-empty
70: SITEPATH=
71:
72: # Standard path components for test modules
73: TESTPATH=:test
74:
75: # Path components for machine- or system-dependent modules and shared libraries
76: MACHDEPPATH=:plat-$(MACHDEP)
77:
78: COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(STDWINPATH)$(TKPATH)
79: PYTHONPATH=$(COREPYTHONPATH)
80:
81:
82: # The modules listed here can't be built as shared libraries for
83: # various reasons; therefore they are listed here instead of in the
84: # normal order.
85:
86: # Some modules that are normally always on:
87:
88: regex regexmodule.c regexpr.c # Regular expressions, GNU Emacs style
89: pcre pcremodule.c pypcre.c # Regular expressions, Perl style (for re.py)
90: posix posixmodule.c # posix (UNIX) system calls
91: signal signalmodule.c # signal(2)
92:
93: # The SGI specific GL module:
94:
95: #gl glmodule.c cgensupport.c -I$(srcdir) -lgl -lX11
96:
97: # The thread module is now automatically enabled, see Setup.thread.
98:
99: # Pure module. Cannot be linked dynamically.
100: # -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE
101: #WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE
102: #PURE_INCLS=-I/usr/local/include
103: #PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs
104: #pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS)
105:
106: # Uncommenting the following line tells makesetup that all following
107: # modules are to be built as shared libraries (see above for more
108: # detail):
109:
110: @NOSHARED@*shared*
111:
112: # GNU readline. Unlike previous Python incarnations, GNU readline is
113: # now incorporated in an optional module, configured in the Setup file
114: # instead of by a configure script switch. You may have to insert a
115: # -L option pointing to the directory where libreadline.* lives,
116: # and you may have to change -ltermcap to -ltermlib or perhaps remove
117: # it, depending on your system -- see the GNU readline instructions.
118: # It's okay for this to be a shared library, too.
119:
120: #readline readline.c -lreadline -ltermcap
121:
122:
123: # Modules that should always be present (non UNIX dependent):
124:
125: array arraymodule.c # array objects
126: cmath cmathmodule.c # -lm # complex math library functions
127: math mathmodule.c # -lm # math library functions, e.g. sin()
128: strop stropmodule.c # fast string operations implemented in C
129: struct structmodule.c # binary structure packing/unpacking
130: time timemodule.c # -lm # time operations and variables
131: operator operator.c # operator.add() and similar goodies
132:
133: #_locale _localemodule.c # access to ISO C locale support
134:
135:
136: # Modules with some UNIX dependencies -- on by default:
137: # (If you have a really backward UNIX, select and socket may not be
138: # supported...)
139:
140: fcntl fcntlmodule.c # fcntl(2) and ioctl(2)
141: pwd pwdmodule.c # pwd(3)
142: grp grpmodule.c # grp(3)
143: select selectmodule.c # select(2); not on ancient System V
144: socket socketmodule.c # socket(2); not on ancient System V
145: errno errnomodule.c # posix (UNIX) errno values
146:
147: # The crypt module is now disabled by default because it breaks builds
148: # on many systems (where -lcrypt is needed), e.g. Linux (I believe).
1.2 ! tron 149: crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems
1.1 tron 150:
151:
152: # Some more UNIX dependent modules -- off by default, since these
153: # are not supported by all UNIX systems:
154:
155: nis nismodule.c # Sun yellow pages -- not everywhere
156: termios termios.c # Steen Lumholt's termios module
157: resource resource.c # Jeremy Hylton's rlimit interface
158:
159:
160: # Multimedia modules -- off by default.
161: # These don't work for 64-bit platforms!!!
162: # These represent audio samples or images as strings:
163:
164: @NO64BIT@audioop audioop.c # Operations on audio samples
165: @NO64BIT@imageop imageop.c # Operations on images
166: @NO64BIT@rgbimg rgbimgmodule.c # Read SGI RGB image files (but coded portably)
167:
1.2 ! tron 168:
1.1 tron 169: # The stdwin module provides a simple, portable (between X11 and Mac)
170: # windowing interface. You need to ftp the STDWIN library, e.g. from
171: # ftp://ftp.cwi.nl/pub/stdwin. (If you get it elsewhere, be sure to
172: # get version 1.0 or higher!) The STDWIN variable must point to the
173: # STDWIN toplevel directory.
174:
175: # Uncomment and edit as needed:
176: #STDWIN=/ufs/guido/src/stdwin
177:
178: # Uncomment these lines:
179: #STDWINPATH=:lib-stdwin
180: #LIBTEXTEDIT=$(STDWIN)/$(MACHDEP)/Packs/textedit/libtextedit.a
181: #LIBX11STDWIN=$(STDWIN)/$(MACHDEP)/Ports/x11/libstdwin.a
182: #stdwin stdwinmodule.c -I$(STDWIN)/H $(LIBTEXTEDIT) $(LIBX11STDWIN) -lX11
183:
184: # Use this instead of the last two lines above for alphanumeric stdwin:
185: #LIBALFASTDWIN=$(STDWIN)/$(MACHDEP)/Ports/alfa/libstdwin.a
186: #stdwin stdwinmodule.c -I$(STDWIN)/H $(LIBTEXTEDIT) $(LIBALFASTDWIN) -ltermcap
187:
188:
189: # The md5 module implements the RSA Data Security, Inc. MD5
190: # Message-Digest Algorithm, described in RFC 1321. The necessary files
191: # md5c.c and md5.h are included here.
192:
193: md5 md5module.c md5c.c
194:
195:
196: # The mpz module interfaces to the GNU Multiple Precision library.
197: # You need to ftp the GNU MP library.
198: # The GMP variable must point to the GMP source directory.
199: # This was originally written and tested against GMP 1.2 and 1.3.2.
200: # It has been modified by Rob Hooft to work with 2.0.2 as well, but I
201: # haven't tested it recently.
202:
203: # A compatible MP library unencombered by the GPL also exists. It was
204: # posted to comp.sources.misc in volume 40 and is widely available from
205: # FTP archive sites. One URL for it is:
206: # ftp://gatekeeper.dec.com/.b/usenet/comp.sources.misc/volume40/fgmp/part01.Z
207:
208: #GMP=/ufs/guido/src/gmp
209: #mpz mpzmodule.c -I$(GMP) $(GMP)/libgmp.a
210:
211:
212: # SGI IRIX specific modules -- off by default.
213:
214: # These module work on any SGI machine:
215:
216: # *** gl must be enabled higher up in this file ***
217: #fm fmmodule.c -lfm -lgl # Font Manager
218: #sgi sgimodule.c # sgi.nap() and a few more
219:
220: # This module requires the header file
221: # /usr/people/4Dgifts/iristools/include/izoom.h:
222: #imgfile imgfile.c -limage -lgutil -lgl -lm # Image Processing Utilities
223:
224:
225: # These modules require the Multimedia Development Option (I think):
226:
227: #al almodule.c -laudio # Audio Library
228: #cd cdmodule.c -lcdaudio -lds -lmediad # CD Audio Library
229: #cl clmodule.c -lcl -lawareaudio # Compression Library
230: #sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11 # Starter Video
231:
232:
233: # The FORMS library, by Mark Overmars, implements user interface
234: # components such as dialogs and buttons using SGI's GL and FM
235: # libraries. You must ftp the FORMS library separately from
236: # ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a.
237: # The FORMS variable must point to the FORMS subdirectory of the forms
238: # toplevel directory:
239:
240: #FORMS=/ufs/guido/src/forms/FORMS
241: #fl flmodule.c -I$(FORMS) $(FORMS)/libforms.a -lfm -lgl
242:
243:
244: # SunOS specific modules -- off by default:
245:
246: #sunaudiodev sunaudiodev.c
247:
248:
249: # George Neville-Neil's timing module:
250:
251: timing timingmodule.c
252:
253:
254: # The _tkinter module.
255: #
256: # The TKPATH variable is always enabled, to save you the effort.
257: TKPATH=:lib-tk
258:
259: # The command for _tkinter is long and site specific. Please
260: # uncomment and/or edit those parts as indicated. If you don't have a
261: # specific extension (e.g. Tix or BLT), leave the corresponding line
262: # commented out. (Leave the trailing backslashes in! If you
263: # experience strange errors, you may want to join all uncommented
264: # lines and remove the backslashes -- the backslash interpretation is
265: # done by the shell's "read" command and it may not be implemented on
266: # every system.
267:
268: # *** Always uncomment this (leave the leading underscore in!):
269: # _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
270: # *** Uncomment and edit to reflect where your X11 header files are:
271: # -I/usr/X11R6/include \
272: # *** Or uncomment this for Solaris:
273: # -I/usr/openwin/include \
274: # *** Uncomment and edit to reflect where your Tcl/Tk headers are:
275: # -I/usr/local/include \
276: # *** Uncomment and edit for Tix extension only:
277: # -DWITH_TIX -ltix4.1.8.0 \
278: # *** Uncomment and edit for BLT extension only:
279: # -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
280: # *** Uncomment and edit for PIL (TkImaging) extension only:
281: # -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \
282: # *** Uncomment and edit for TOGL extension only:
283: # -DWITH_TOGL togl.c \
284: # *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
285: # -L/usr/local/lib \
286: # *** Uncomment and edit to reflect your Tcl/Tk versions:
287: # -ltk8.0 -ltcl8.0 \
288: # *** Uncomment and edit to reflect where your X11 libraries are:
289: # -L/usr/X11R6/lib \
290: # *** Or uncomment this for Solaris:
291: # -L/usr/openwin/lib \
292: # *** Uncomment these for TOGL extension only:
293: # -lGL -lGLU -lXext -lXmu \
1.2 ! tron 294: # *** Uncomment for AIX:
! 295: # -lld \
1.1 tron 296: # *** Always uncomment this; X11 libraries to link with:
297: # -lX11
298:
299: # Lance Ellinghaus's modules:
300:
301: rotor rotormodule.c # enigma-inspired encryption
302: syslog syslogmodule.c # syslog daemon interface
303:
304:
305: # Lance's curses module. This requires the System V version of
306: # curses, sometimes known as ncurses (e.g. on Linux, link with
307: # -lncurses instead of -lcurses; on SunOS 4.1.3, insert -I/usr/5include
308: # -L/usr/5lib before -lcurses).
309:
310: #curses cursesmodule.c -lcurses -ltermcap
311:
312:
313:
314: # Tommy Burnette's 'new' module (creates new empty objects of certain kinds):
315:
316: new newmodule.c
317:
318:
319: # Generic (SunOS / SVR4) dynamic loading module.
320: # This is not needed for dynamic loading of Python modules --
321: # it is a highly experimental and dangerous device for calling
322: # *arbitrary* C functions in *arbitrary* shared libraries:
323:
324: #dl dlmodule.c
325:
326:
327: # Modules that provide persistent dictionary-like semantics. You will
328: # probably want to arrange for at least one of them to be available on
329: # your machine, though none are defined by default because of library
330: # dependencies. The Python module anydbm.py provides an
331: # implementation independent wrapper for these; dumbdbm.py provides
332: # similar functionality (but slower of course) implemented in Python.
333:
334: # The standard Unix dbm module:
335:
336: dbm dbmmodule.c # dbm(3) may require -lndbm or similar
337:
338: # Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm:
339:
340: #gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
341:
342:
343: # Berkeley DB interface.
344: #
345: # This requires the Berkeley DB code, see
346: # ftp://ftp.cs.berkeley.edu/pub/4bsd/db.1.85.tar.gz
347: #
348: # Edit the variables DB and DBPORT to point to the db top directory
349: # and the subdirectory of PORT where you built it.
350: #
351: # (See http://www.jenkon-dev.com/~rd/python/ for an interface to
352: # BSD DB 2.1.0.)
353:
354: #DB=/depot/sundry/src/berkeley-db/db.1.85
355: #DBPORT=$(DB)/PORT/irix.5.3
356: bsddb bsddbmodule.c # -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a
357:
358:
359:
1.2 ! tron 360: # David Wayne Williams' soundex module (obsolete -- this will disappear!)
1.1 tron 361: soundex soundex.c
362:
363: # Helper module for various ascii-encoders
364: binascii binascii.c
365:
366: # Fred Drake's interface to the Python parser
367: parser parsermodule.c
368:
369: # Digital Creations' cStringIO and cPickle
370: cStringIO cStringIO.c
371: cPickle cPickle.c
372:
373:
374: # Lee Busby's SIGFPE modules.
375: # The library to link fpectl with is platform specific.
376: # Choose *one* of the options below for fpectl:
377:
378: # For SGI IRIX (tested on 5.3):
379: #fpectl fpectlmodule.c -lfpe
380:
381: # For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):
382: # (Without the compiler you don't have -lsunmath.)
383: #fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm
384:
385: # For other systems: see instructions in fpectlmodule.c.
386: #fpectl fpectlmodule.c ...
387:
388: # Test module for fpectl. No extra libraries needed.
389: #fpetest fpetestmodule.c
390:
391: # Andrew Kuchling's zlib module.
392: # This require zlib 1.0.4 (or later). See http://quest.jpl.nasa.gov/zlib/
1.2 ! tron 393: # See http://www.cdrom.com/pub/infozip/zlib/
! 394: zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
1.1 tron 395:
396:
397: # Example -- included for reference only:
398: # xx xxmodule.c
CVSweb <webmaster@jp.NetBSD.org>