Up to [cvs.NetBSD.org] / pkgsrc / ham / hamlib
Request diff between arbitrary revisions
Keyword substitution: kv
Default branch: MAIN
ham/hamlib: Update to 4.7.2
Upstream NEWS, less bugfixes and minor improvements:
Version 4.7.2
* 2026-06-21
* rigctld: Fix send_raw stack out-of-bounds write and uninitialized memory;
CVE-2026-54634/GitHub GHSA-gpcq-c37x-pr4. (TNX George Baltz)
* rigctld: Fix stack/heap overflow primitive in read_string_generic +
auth bypass in rigctld + weak password handling; GitHub GHSA-f72v-7gmh-m9mj.
(TNX George Baltz)
Update committed in freeze, because:
- micro update
- good upstream history of micro being micro
- 6 dependencies (<25)
- carries CVE and would be pulled up anyway
and
- 5 deps build, and freedv is broken by a codec2 update
ham/hamlib: Update to 4.7.1
Upstream NEWS, less bugfixes and minor improvements:
Version 4.7.1
* 2026-04-15
* Add power off capability to Flrig backend. (TNX Philip Rose)
* New simplecat backend. Supports Bunzee Labs DDX. (TNX Dhiru Kholia)
* Add new rig model Harris PRC-138. (TNX Antonio Regazzoni)
ham/hamlib: Update to 4.7.0
Version 4.7.0
* 2026-02-15
* Revamp Kenwood voice memory handler - Fixes TS-890S & TS-990S (n3gb)
* libusb is now detected using the pkg-config facility.
* Some internal functions change names to avoid conflicts with apps.
* POSIX threads are required to build and run Hamlib. Note that it was
actually the case for 4.6.x, but now the configuration step will
fail instead of the compilation. (n3gb)
* Functions rig_get_conf, rot_get_conf, amp_get_conf deprecated;
use *_get_conf2() instead. Also rig_set_trn and rig_get_trn deprecated.
* Reduce/repair excess output from cppcheck.sh - mostly cosmetic changes (WIP)
Output from `wc -l cppcheck.log` - 4.6.2: 981 now: 581
* Remove dead getopt code. GitHub PR #1709. (TNX Daniele Forsi)
* Move rig_cache to separate(calloc) storage. Prepare for other moves.
Issue #1420
* Many fixes for SWIG binding generation and improved Python support
and testing. (TNX Daniele Forsi).
* Fix AGC for IC-R75, fix AGC for all Icom rigs. (TNX Mark Fine).
* Separate PMR-171 and Q900 into new the GUOHETEC backend, add
additional support add clean up code. (TNX FVsonar).
* New Drake R8 backend. (TNX Mark Fine)
* New AF6SA WRC rotator backend. (TNX Michael Morgan)
* New Yaesu FTX-1 model support (alpha). (TNX Jeremy Miller).
* Update QRPLabs QMX backend for max serial rate of 230400 bps. (TNX Mooneer Salem)
* Updates to Icom IC-F8101. (TNX Mitchell Winkle and George Baltz)
* New rig model Icom ID-52A/W Plus. (TNX Martin Andrich)
* Fix memory leaks in rigctld and rigctltcp. (TNX Geroge Baltz)
* Fix Skywatcher backend for firmware that doesn't echo commands. (TNX Daniel Forsi)
* Various manual page updates. (TNX Daniel Forsi)
* Additional Yaesu FTX-1 capabilities. (TNX KJ5HST)
* Refactor repeater offset and ANTIVOX with lookup tables in newcat.c (TNX KJ5HST)
* Fix unbounded string usage in tests/*ctl_parse.c. May cause crashes or worse.
Reported by Vlatko Kosturjak with Marlink Cyber. (TNX George Baltz for the fix)
* Add extended commands for the IC-7300MK2--closes GitHub #1985. (TNX George Baltz)
* Revert updating FLRig model name. (TNX Peter Sumner & Philip Rose)
* Add manual pages for rigctltcp, rigtestlibusb, rigtestmcast, and rigtestmcastrx.
Pause building rigfreqwalk as the code does not align with the required
commandline parameters.
ham/hamlib: Update to 4.6.5 Upstream NEWS: bugfixes
ham/hamlib: Update to 4.6.4
Upstream news, less bug fixes:
Version 4.6.4
* 2025-07-18--Hamlib's 25th birthday!!!
* Add CW sending capability to Flex SmartSDR. (TNX Michael Morgan)
ham/hamlib: Update to 4.6.3
Upstream news, less most bug fixes:
Version 4.6.3
* 2025-06-10
* Release dedicated to the memory of Michael Black, W9MDB (SK). Mike was a
long-time contributor to Hamlib and led development of the project for over
five years from 2020 to 2025. Mike passed away on March 28, 2025 due to
complications from ALS (Lou Gehrig's disease).
* Restore IC-7300 spectrum data callback - regression in 4.6 (n3gb)
* IC-705 filter selection bandwidth for FM and WFM (TNX Kenji Rikitake)
* IC-705 COMP, VD, and ID meter calibration values (TNX Kenji Rikitake)
* Add rig CODAN 2110
ham/hamlib: Update to 4.6.2
Upstream NEWS:
Version 4.6.2
* Add missing levels for IC746/PRO RIG_LEVEL_RFPOWER_METER,RIG_LEVEL_RFPOWER_METER_WATTS,RIG_LEVEL_SWR,RIG_LEVEL_ALC
* Fix IC905 for gpredict
* Fix potential segfault on QMX
* Fix pmr171
ham/hamlib: Update to 4.6.1
packaging: Drop bugfix patch adopted by upstream.
Upstream NEWS:
Version 4.6.1
* Fix C++ builds failing on rig_list_foreach function
* Fix IC9100 rigctld startup to end up on VFOA
* Fix grig build by removing sys/socket.h -- apparently not needed
* Add new QMX entry to fix incompability with QDX
* Fix IC746/PROT to not use data byte
* FLRig to add DATA-U DATA-L modes
* Fix TS570 RIG_LEVEL_STRENGTH with cal table
* Remove get_powerstat from IC785X -- not supported
* Fix SDRConsole by removing lots of things it does not have
ham/hamlib: Update to 4.6
Upstream NEWS, less bugfixes, addition of radios, and minor improvements.
Version 4.6 (2024-12-24)
* send_raw can now take hex digits as colon-separated -- e.g. send_raw icom xfe:xfe:x94:xe0:03:xfd
* Added macros for applications to obtain pointers to Hamlib structures(issues #1445, #1420, #487).
Internal conversion is still a WIP, but use of these macros will make the final cutover transparent to applications.
* Unify behavior of all rigctl split commands
* Make the set_split_* commands modify the state of the specified split VFO -- the current or targeted VFO do not have any effect
* Make the set_split_* commands enable split automatically if not enabled
* Make the get_split_* commands return frequency of 0 Hz, mode NONE and filter of 0 Hz if split is not enabled
* Allow all split commands to avoid VFO swapping if supported by the rig model
* Expose "Targetable features" (RIG_TARGETABLE_*) in dump_caps output to allow clients to determine which commands can be executed without VFO swapping
* Added VOICE/CW memory capability to many rigs -- thanks to David Balharrie M0DGB/G8FKH
* Add -# --skip_init option to rigctl to skip rig initialization -- useful for executing commands quickly
* rig_caps is no longer constant -- this may break some 3rd party relying on the "const" declaration. Here's an example of how to handle compatibility.
#ifdef RIGCAPS_NOT_CONST
static int add_to_list(struct rig_caps* rc, void*)
#else
static int add_to_list(const struct rig_caps* rc, void*)
#endif
* Hamlib now starts a multicast server that sends out rig information. Does not receive commands yet.
See README.multicast
* rigctld has new -b/bind-all option to try all interfaces -- restores original behavior. This was done to fix duplicate rigctld instances on Windows
* Yaesu rigs can now use send_morse to send keyer message 1-5 or a CW message up to 50 chars (which will use memory 1)
* rig set level METER can now take SWR,COMP,ALC,IC/ID,DB,PO,VDD,TEMP arguments to set which meter to display
* Added parm BANDSELECT for Yaesu rigs
'p BANDSELECT' returns current band of VFOA
'P BANDSELECT BAND160M' example selects the 160M band
'P BANDSELECT ?' shows bands available for the rig
* Added rig_cm108_get/set_bit to API and get/set_gpio to rigctl(d) for GPIO1,2,3,4 access on CM108
* Add client_version to rigctld so client can report it's version for future use/compatibility/alternatives
* Add --set-conf=tuner_control_pathname=hamlib_tuner_control (default)
If file exists then it will be called with 0/1 (Off/On) argument
with 'U TUNER 0' or 'U TUNER 1"
Default path is for current directory
*: recursive bump for Python 3.11 as new default
ham/hamlib: Update to 4.5.5 Upstream changes since 4.5.4: bugfixes and minor improvements
ham/hamlib: Update to 4.5.4 (This is a micro release.)
ham/hamlib: Update to 4.5.3 upstream changes are bugfixes/minor
ham/hamlib: Use github as MASTER_SITES Upstream just documented the github/sourceforge relationship. (Same bits, so no change to package.)
ham/hamlib: Add commented-out github fetch variables (This is still on sourceforge.)
ham/hamlib: Adjust comments about distfiles (This is a comment-only change.)
ham/hamlib: Recover from using a github distfile The distfile from github is currently broken, or has been attacked, and our distinfo scheme caught that. Or perhaps it was always not ok. Switch to sourceforge which serves a file that has a sensible diff from 4.3.1 and matches the distinfo I generated earlier. No change to binary package, but PKGREVISION++ because of MASTER_SITES change.
ham/hamlib: Miscellaneous cleanup (NFCI) Drop PKGREVISION; ride previous update. Adjust MASTER_SITES and HOMEPAGE and explain the dual-forge situation. GC support for a different version in distfile and WRKDIR, hoping that it won't be needed again.
nham/hamlib: Update to 4.5
Upstream NEWS does not indicate an ABI break, and there is no shlib
major change.
Upstream NEWS, less most new radios, bugfixes, and minor improvements:
Version 4.5 (2022-10-30)
* New rotator utility https://www.pianetaradio.it/blog/catrotator/
* Kenwood rigs should now support AI command packets
* Add get_separator and set_separator and -S option for rigctld -- node-red applicability
* Add GRBLTRK rotor project -- two axis rotor
* enum meter_level_e is deprecated and will be removed in 4.6
* Add SDRPlay SDRUno rig -- can now use Data/Pkt in WSJTX
* Add ability to use cat_string to FLRig via the "w" and "W" commands
* Add -B/--mapa2b to rigctlcom
Allows rigctlcom to map set_freq on VFOA to VFOB instead
This will allow CW Skimmer to work with some rigs (e.g. IC7300) using FM
mode on VFOA and CW mode on VFOB and split mode transmit on VFOB.
Clicking on CW Skimmer will change VFOB instead of VFOA to allow working
dxpeditions where the fox is staying on frequency
* Add password capability to rigctld via -A switch.
rigctld -A will produce a consistent shared key for any specific password that can used in \password and rig_set_password
TBD The shared key can also be placed in .hamlib_settings
* Asynchronous rig data output handling to support transceive and spectrum data. Mikael, OH3BHX
Example for the IC-7300 to multicast on port 20001 and provide async rig information
rigctld --port=20001 --model=3073 --serial-speed=115200 --rig-file=/dev/serial/... --set-conf=rts_state=OFF --set-conf=dtr_state=OFF --multicast-addr=224.0.0.1 --multicast-port=20001 --set-conf=async=1
Also, spectrum data output needs to be enabled with: \set_func SPECTRUM 1
* See new set_conf option async for some Icom rigs
* Multicast UDP packet output for asynchronous data. Mikael, OH3BHX
* Rig state poll routine to serve commonly used data like frequency and mode from cache. Mikael, OH3BHX
* deprecated hamlib_port_t at front of rig_state structure -- new one at end of structure
* New rig_send_raw to send/read raw command to rig
* New RIG_LEVEL_BAND_SELECT for Yaesu rigs
* New rig_get_conf2 to replace rig_get_conf buffer overflow potential
* New rot_get_conf2 to reaplce rot_get_conf buffer overflow potential
* Added Barrett 4050 -- not functional yet
* Deprecated: rigctl commands \set_trn (A) and \get_trn (a) as they never worked as intended
* Deprecated: field rig_caps.transceive and RIG_TRN_* macros
Version 4.4 (2021-12-02)
* Icom rigs now default filter 2 when setting PKTUSB but user can override
* Add Android sensor as a rotator
* Added rig_get_vfo to some Icom rigs that have XCHG or 0x25 command capability
* Added ability to build hamlib with docker
* Faster serial i/o noticeable on higher baud rates
*: recursive bump for perl 5.36
hamlib: add CHECK_PORTABILITY_SKIP
ham/hamlib: Note that workaround has been reported upstream
ham/hamlib: Update to 4.3.1
packaging:
- Adjust upstream program testlibusb to have rigctl_ prefix to avoid
collisions.
- Note that sunos patch should be sent upstream.
Version 4.3.1
* 2021-09-14
* Bug fix release
Version 4.3
* 2021-09-01
* libusb-1.0.23 or greater is now required or use --without-libusb
* Generating documentation now requires GNU source-highlighter.
* Added IC-575
* Less VFO swapping of newer Icom rigs -- zero swapping in WSJTX and JTDX
* Dual rotator control in rotctl -R option
* Started work on simulators -- very crude right now but usable to debug some things
* Overhaul of rig split -- reverse split (VFOA=RX VFOB=TX) should work for rigs capable of it
Starting VFO does not matter -- rig will end up on RX VFO
S VFOA 1 VFOB
S VFOB 1 VFOA
S Main 1 Sub
S Sub 1 Main
Version 4.2
* 2021-05-17
* New rig_get_mode_bandwidths -- returns token set for bandwidths for given mode
Rig command: \get_mode_bandwidths CW
Mode=CW
Normal=500Hz
Narrow=50Hz
Wide=2400Hz
* New rig_get_info -- returns token set for all vfos where order does not matter
This is a string return to allow for easy future expansion without changing the API
New tokens may be introduced and can be skipped if not used by clients
Rig command: \get_rig_info
VFO=Main Freq=145000000 Mode=None Width=0 RX=1 TX=1
VFO=VFOB Freq=145000000 Mode=FM Width=15000 RX=0 TX=0
Split=0 SatMode=0
Rig=Dummy
App=Hamlib
Version=20210429
CRC=0xf49f4708
* New rig_get_vfo_info
Rig command: \get_vfo_info VFOA
Freq: 145000000
Mode: None
Width: 0
Split: 0
SatMode: 0
* FILPATHLEN has changed to HAMLIB_FILPATHLEN
* USRP lib and gnuradio are deprecated and will be removed in 5.0
* Added Radan rotator
* Added Malachite SDR
* Major rework for PRM80
* Add twiddle_timeout and twiddle_rit --set-conf options
rigctld --set-conf=twiddle_timeout=5,twiddle_rit=1
This will set the twiddle timeout to 5 seconds and turn on twiddle_rit
For twiddle timeout VFOB will not be polled for 5 seconds after VFO twiddling
is detected
* rigctld --twiddle is deprecated and will be removed in 5.0 along with
get_twiddle and set_twiddle
* Rework Doxygen manual including default layout for Doxygen 1.9.1. So far
the amplifier, rotator, and utilities API sections have been updated. The
rig (radio) section remains to be updated.
*: recursive bump for perl 5.34
ham/hamlib: Update to 4.1
Version 4.1
2021-01-31
* rigctld and rigs should be more robust for disconnect problems
* Several fixes for Icom and Yaesu rigs
* Nobody should need to use rig->caps or rig->state anymore
If you need a variable added please contact us.
Note that rig->state abstraction is not implemented yet...no need known
* New rig_get_caps_int and rig_get_caps_cptr functions to replace using caps-> values
* New rig_get_function to replace using caps-> function pointers
* Fix shared library problem with WSJTX, JTDX, and JS8Call
* New model Barrett 950
Version 4.0
2020-11-29
* API/ABI changes, advance ABI to 4 0 0.
* Add GPIO and GPION options for DCD. Jeroen Vreeken
* New backend: ELAD FDM DUO. Giovanni, HB9EIK.
* New RIG_LEVEL_RFPOWER_METER_WATTS level
* All channel functions now take a vfo argument
* New rotator backend: iOptron. Bob, KD8CGH
* New model: Icom IC-R8600. Ekki, DF4OR
* New utility: rigctlcom. Mike, W9MDB
* New model: FT847UNI for unidirectional early serial numbers. Mike, W9MDB
* Remove GNU Texinfo files and build system dependency.
* Rig model numbers have changed to allow future growth
* Fix a lot of static code analysis errors and warnings. Mike, W9MDB
* Rearrange directory structure to put rigs and rotators sources
under their own subdirectories. Mike, W9MDB
* rig_get_channel changed to add read_only flag.
* rigctl(d) f command also returns VFO now.
* caching of vfo, frequency, mode, and ptt speeds up rigctld for all.
* caching of kenwood/yaesu "IF" speeds up polling from WSJTX/JTDX.
* rig_get_channel now has read_only flag but it still needs to be
implemented based on rig behavior, so if you use rig_get_channel you
may get a RIG_ENIMPL error to contact us for fixing it.
* New rig backend for Elecraft K4.
* New rig backend for PowerSDR (Flex and Apache users).
* Many fixes and enhancements. Mike, W9MDB and many contributors
* PTT port is no longer shared by default, use --set-conf=ptt_share=1 to enable
*: bump PKGREVISION for perl-5.32.
*: Convert broken sourceforge HOMEPAGEs back to http
all: migrate several HOMEPAGEs to https pkglint --only "https instead of http" -r -F With manual adjustments afterwards since pkglint 19.4.4 fixed a few indentations in unrelated lines. This mainly affects projects hosted at SourceForce, as well as freedesktop.org, CTAN and GNU.
ham: align variable assignments pkglint -Wall -F --only aligned --only indent -r No manual corrections.
Bump PKGREVISIONs for perl 5.30.0
Recursive bump for perl5-5.28.0
hamlib: update to 3.3
Version 3.3
2018-08-20
* New models, R&S xk2100, TRXMAnager, Meade LX200
* HTML manual is now generated at 'make dist' so users don't
need GNU Info tools installed. TNX Greg, N1DAM for the suggestion.
* Handle longer udev generated file names up to 512 characters
* Add debug time stamps with new '-Z' option and '--debug-time-stamps'
options to rigctl, rotctl, rigctld, and rotctld utilities.
* rigctld/rotctld continue working after serial or TCP device
disappears.
* Updates and fixes to FT-817, K3, IC-7300, AOR 3030, TM-D710,
OMNI VII, TH-D72, Flrig, TS-590, piHPSDR, TS-2000, and netrigctl.
* Update utility manual pages (section 1) and remove their reference
material from the Info manual so it only needs to be update in one
file.
* Add new general project manual pages (section 7) and edit the Info
manual to match. These should not change much so keeping them in
sync should not be too much of a burden. The Info manual may be
removed at some point in the future.
* Last planned release of the present API/ABI. Future releases will
require recompilation and relinking by client programs using the C
library interface (programs that only use the network daemons should
be unaffected).
hamlib: update to 3.2
Version 3.2
2018-03-31
* New models, IC-7850/IC-7851 in IC-785x. Mike, W9MDB
* Fix ft991_get_mode, Mike, W9MDB
* New model, FT-891. Mike, W9MDB
* New Barrett 2050 backend, Mike, W9MDB
* New Flrig backend, Mike, W9MDB
* New model, IC-M710, Mike, W9MDB
* Build instructions and test script for Python3
* Rename autogen.sh to bootsrap and don't call configure
* micro-ham support. Christoph, DL1YCF
* New rotator, SPID MD-01/02 in ROT2 mode, Norvald Ryeng, LA6YKA
* New model, Flex 6400/6600, Mike, W9MDB
* New model, IC-7610, Mike, W9MDB
* Add support for CM108B PTT, Max Lock
* New model, Rohde & Schwarz XK2100, Mike, W9MDB
* Many other bug fixes and enhancements
hamlib: update to 3.1
Version 3.1
2016-12-31
* Fix kenwood_set_mode for ts590s and mode CW, RTTY or AM.
Tks Tom, DL1JBE
* Proper IPV6 and dual stack networking. Bill, G4WJS
* Add a new command line option '--no-restore-ai' ('-n') to rigctl.
Bill, G4WJS
* Fix missing PKTUSB mode setting code for FT-817 & FT-897. Bill, G4WJS
* New Prosistel rotor backend from IZ7CRX
* Install daemon man files to man1. Nate, N0NB
* Migrate from libusb-0.1 to libusb-1.0. Stephane, F8CFE
* Added support for Icom IC-2730. robinolejnik
* Added support for the Icom IC-7300. Mike, W9MDB
* Add send_morse to icom rigs. Mike, W9MDB
* added instructions how to compile on OSX. DH1TW
* New Perseus model. Stephane, F8CFE
* Added Lua binding and demo script. Ervin, HA2OS
* Added test to support Flex 6300. Bill, KB4AAA
* Many bug fixes and feature enhancements to the code base. See the
Git commit log for complete details.
Bump PKGREVISION for perl-5.24.0 for everything mentioning perl.
Update to 3.0.1. Packaging changes: Drop MAKE_JOBS_SAFE=no; it seems to build fine with -j4. Clean up workarounds for resolved issues. Drop rpc conditional, because upstream removed rpc entirely Upstream changes: Many bug fixes and new radios. Drop RPC. Rototill build system. Add readline support (not packaged yet). Change to single library instead of many.
Recursive PKGREVISION bump for all packages mentioning 'perl', having a PKGNAME of p5-*, or depending such a package, for perl-5.22.0.
Bump for perl-5.20.0. Do it for all packages that * mention perl, or * have a directory name starting with p5-*, or * depend on a package starting with p5- like last time, for 5.18, where this didn't lead to complaints. Let me know if you have any this time.
Disable RPC support on SmartOS.
Bump all packages for perl-5.18, that a) refer 'perl' in their Makefile, or b) have a directory name of p5-*, or c) have any dependency on any p5-* package Like last time, where this caused no complaints.
Update to 1.2.15.3. Note that MAKE_JOBS_SAFE=no seems unnecessary. Set LICENSE. Version 1.2.15.3 2012-11-01 * Fix configure.ac so that rigctld/rotcld work on Win32 platform * Add NSIS script to build executable installer on Win32 platform * Remove unsupported commands on IC-756 (non-Pro model) from AK6I * Fix set_split in netrigctl.c to properly accept the split value. TNX, N2ADR. * IC-R8500: Add RIG_LEVEL_AF to has_set_level. TNX John, EI7IG * ADAT updates from Frank, DG1SBG, needed for stable operation.
Bump all packages that use perl, or depend on a p5-* package, or are called p5-*. I hope that's all of them.
Drop superfluous PKG_DESTDIR_SUPPORT, "user-destdir" is default these days.
Version 1.2.15.2
2012-08-05
* Read eeprom value for digital mode from FT-857
* Clean up TS-950 series commands and read mode using IF command
* Fix GS-232A/B rotor command terminations
* Fix warnings and other issues found by mingw-w64
* Allow seamless access to ports higher than COM9 on Windows
* Fix ineffective packed attribute on WinRadio
* Correct low signal strength S-meter error on AR7030+
* Updates to HiQSDR by Jim, N2ADR
pkgsrc changes: Document patches from CVS history.
Add TEST_TARGET. Take maintainership.
Revert commit on wrong branch.
Add TEST_TARGET.
Update to 1.2.15.1. Upstream claims this is ABI compatible, so no revbump. Version 1.2.15.1 2012-03-11 * HD-1780 rotor endpoint limit fix * Quell adat compile warnings * Sort rig/rot list output from rig/rotctl (-l) by model # * TenTec Jupiter (TT538) fixes * Include various backend notes files * Document sorted -l output for <rig|rot>ctl[d] * Updates README.betatester and README.developer Version 1.2.15 2012-02-02 * New models: TT-599 Eagle, IC-RX7, IC-1275, HiQSDR, ADAT ADT-200A, DttSP UDP, TM-D710 * New rotator backends: Celestron (telescope mount) * Fixes and features: K3, various other rigs * Update LGPL/GPL header boilerplate * Quell various compiler errors * Add CM108 PTT capability Version 1.2.14 2011-08-01 * New models: SigFox Transfox, TH-D72A, IC-7410, IC-9100, IC-R9500, KX3, V4L2 API support (untested), * New rotator backends: IF-100, TS-7400 * Fixes and features: K3/KX3, Build Win32 from script, rigctld/rotctld ported to Mingw32, Win32 build fixes, remove obsolete bundled libtool files, rigctl improvements, FUNcube string test (works with V0.0 and V1.0), Yaesu newcat.c fixed to use rig->state.current_vfo to store vfo value, add a command to halt rigctld, select PTT source in Kenwood backends (TS-590S), make sure scan is stopped at IC-9000 opening, thd72 get channel data (alpha). See ChangeLog for a link to the online log. Correct typos and SF.net URIs. Version 1.2.13.1 * 2011-05-29 * Conversion to Git SCM and updated README documentation for Git SCM * Mingw32 build fixes * FUNcube dongle USB fixes for Win32 * Added kit/README.funcubedongle * Bug fix--K3 antenna selection function Version 1.2.13 2011-03-12 * New models: VX-1700, FUNcube Dongle, FiFi-SDR, KTH-SDR Si570, FT-DX5000, TS-590S, TH-F6A, PRM8060, SR-2200 * Rotor fixes and features: SPID * New Rotor backend: F1TE Tracker * Fixes and features: TS-440S, K2, K3, THF6A, THF7E, NewCAT rigs serial port defaults, TM-D700, FT-950, Si570 AVR-USB * Removed libtool tree from source tree * Removed old DocBook files * Allow USB device's VID/PID/Vendor/Product to be explicitly specified * Doxygen documentation updates and new style sheet
Reset maintainer for retired developers.
Update to hamlib 1.2.12
Contributed by Makoto Fujiwara in PR 44035
Changes:
Version 1.2.12
2010-09-03
* New models: PCR-2500, RX331, TRP 8255 S R
* New rotator backends: DF9GR's ERC
* Fixes and features: Paragon, TS-690S, FT-920, FT-990, FT-2000,
Elektor SDR-USB, IC-7000, IC-7700, AR-8200, AR-8600
Version 1.2.11
2010-05-31
* New models: RA-3702, IC-738, IC-7600, IC-7700, AR 7030+,
FT-980, TT-536 Delta-II, R&S EB200
* New rotator backends: GS-232B, GS-232 (not A or B), ARS RCI, M2 RC2800
* Fixes and features: TH-F7E, FT-847, FT-736, FT-920, FT767GX, FT-747,
FT-950, FT-450, Yaesu NewCAT, PCR*, IC-706MkIIG, IC-7800, R-8A, Paragon
* rigctld/rotctld
* ltdl security update
* IPv6 ready
* bindings not built by default
Version 1.2.10
2009-11-02
* New models: IC-7200, PCR-1500, RX-340, R&S ESMC, BC898T,
Si570 AVR-USB, Paragon (skeleton)
* New rotator backend: SPID
* Fixes and features: TH-F7E, K2, FT-920, Yaesu NewCAT, IC-7000, IC-7800,
IC-910, IC-718, IC-756PROIII, Tentec Orion, Jupiter, RX320, AOR-8000,
PCR-1000, Video4Linux, all the kenwood backends, GS-232A
* ABI version in backend symbols
* expose PTT/DCD setup through rig_set_conf()
* Parallel port PTT now following cwdaemon (STROBE+INIT) interface
* bindings
* ltdl update
Version 1.2.9
2009-02-25
* New models: FT2000, FT9000, TT-588 Omni VII, FT-840, NRD525, Winradio G305, TRC-80
* New rotator backend: Heathkit HD 1780 Intellirotor
* Fixes and features: IC-706*, IC-910, K2, K3, DWT, PCR-100, PCR-1000, RX-320,
FT-450, FT-747, FT-817, FT-847, FT-857, FT-990, FT-1000D, Orion, netrot,
Rotor-EZ, dummy rig and dummy rotator
* Bug fix in qrb()
* Better assisted split operation
* ext_level/ext_parm examples
* Documentation update
Version 1.2.8
2008-11-02
* New models: BC235, BC250, BC780, PRO-2052,
BCD396T, BCD996T, K3, FT950
* New pseudo models: netrigctl/netrotctl, backends ala rpcrig/rpcrot,
but based on rigctld/rotctld
* New rotator backend: GS232A, PcRotor
* Removed microtune backend
* Fixes: DttSP, IC-275, IC-475, IC-725, IC-735, IC-756PRO, IC-761,
IC-775, IC-781, IC-706*, Kenwood TH/TM models, Orion,
BC245, BC895, FT-100, FT757GX, FT-857, FT-897, FT-920
* Numerous bindings fixes, esp. for memory channel works
* New commands available in rigctl
* New rotctld to go with rigctld rig daemon.
The protocol changed, but there's the compatibility
option -e to pass to the daemon for previous protocol.
Mark packages as MAKE_JOBS_SAFE=no that failed in a bulk build with MAKE_JOBS=2 and worked without.
DESTDIR support.
Add missing files to PLIST. Bump PKGREVISION.
Updated hamlib to version 1.2.7.1: * aor/: aor.c, aor.h, ar2700.c, ar5000.c, ar8000.c, ar8200.c, ar8600.c: implemented scanning * include/hamlib/riglist.h: added FT950 * set_ant/get_ant support for ts870s and ts2000 * kenwood/ts2000.c: S meter calibration
Updated hamlib to 1.2.6.2: Minor bugfix release
Updated hamlib to version 1.2.6:
* Improved TS570 functionality
* Improved Argonaut V functionality
* New models: IC7000, G313i/G313e
* Many Icom, Kenwood, and Tentec fixes.
* Build system fixes
Uses C++.
The configure script insists on a Python interpreter even if it doesn't need one. Overriding the PYTHON environment variable helps. This allows the package to build on NetBSD 3.0.
Updated hamlib to 1.2.5:
New in 1.2.5:
* frontend API: support for clonable rigs
rigmem: CSV format change
rigctl: new send_cmd for protocol debugging purpose
easy USB devices support
* new models: AR8600, AR2700, DWT (DLL based under Windows,
libusb based under other OS, need test)
* fixes: big AOR update, AR7030, Orion, NRD-545, RX-320,
FT-817, FT-990, TS-2000, Easycomm
* port: BSD fix of parallel port support
Recursive revision bump / recommended bump for gettext ABI change.
Remove USE_GNU_TOOLS and replace with the correct USE_TOOLS definitions: USE_GNU_TOOLS -> USE_TOOLS awk -> gawk m4 -> gm4 make -> gmake sed -> gsed yacc -> bison
Updated hamlib to 1.2.4: * new frontend API * added support for TS840, VR5000, FT1000MkV * bug fixes for TS570S, AR7030, AR3000A, FT897, IC746 * fixed 64bit int handling * added xBSD parallel support
Remove USE_BUILDLINK3 and NO_BUILDLINK; these are no longer used.
Always create a ${TOOLS_DIR}/bin/rpcgen to wrap the real rpcgen.
The wrapper will correctly set the CPP environment variable to a
stat((2)able path to a C preprocessor, then rely on the PATH to
find and invoke the real rpcgen.
Remove NO_EXPORT_CPP in package Makefiles where it was used just to
avoid problems with rpcgen. The build system now just does the right
thing automatically without needing package-specific knowledge.
This fixes PR pkg/27272.
Update of hamlib to 1.2.3: New models and bugfixes -
* frontend API: LEVEL_SQLSTAT marked as deprecated
* new backends: Racal, V4L radio cards, Watkins-Johnson 8888
* new models: IC-78, IC-7800, IC-R20, IC-756PROIII
* fixes: AOR 5k&8k: added S-Meter, 7030: fixed freq,
IC-R8500: calibrated S-Meter, legacy Jupiter and many others..
* port: mingw32 dist with gcc 3.4 version, and stdcall interface
to prepare for VisualBasic support.
Libtool fix for PR pkg/26633, and other issues. Update libtool to 1.5.10 in the process. (More information on tech-pkg.) Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and installing .la files. Bump PKGREVISION (only) of all packages depending directly on the above via a buildlink3 include.
New in 1.2.2: * new models: Ten-Tec (Orion), AOR 3030, Yaesu FRG's, Skanti * fixes: JRC NRD435 & NRD535, Drake, AOR3000, and many other * port: Fixes for BRK/RTS/DTR handling under win32 (-> Elektor304) * bindings: updated Visual Basic wrapper file * rigswr: new command to measure VSWR vs frequency
Create the directory for header files before trying to install them into it. The directory already existed as a '@dirrm' in the PLIST. Fixes a problem shown up by the bulk builds.
bl3ify and set NO_EXPORT_CPP to placate rpcgen.
Update hamlib to 1.2.0: Support for additional radios and many bug fixes
LIBTOOL_OVERRIDE and SHLIBTOOL_OVERRIDE are now lists of shell globs
relative to ${WRKSRC}. Remove redundant LIBTOOL_OVERRIDE settings that
are automatically handled by the default setting in bsd.pkg.mk.
replace deprecated USE_GMAKE with USE_GNU_TOOLS+=make.
Various patches to make this work with rpcgen that exports _rpcsvcdirty incorrectly
s/netbsd.org/NetBSD.org/
Added hamlib-1.1.4: API for digital communications equipment
Initial revision