The NetBSD Project

CVS log for pkgsrc/emulators/vice/PLIST

[BACK] Up to [cvs.NetBSD.org] / pkgsrc / emulators / vice

Request diff between arbitrary revisions


Keyword substitution: kv
Default branch: MAIN


Revision 1.38: download - view: text, markup, annotated - select for diffs
Thu Jan 15 20:39:25 2026 UTC (10 months ago) by rhialto
Branches: MAIN
CVS tags: pkgsrc-2026Q3-base, pkgsrc-2026Q3, pkgsrc-2026Q2-base, pkgsrc-2026Q2, pkgsrc-2026Q1-base, pkgsrc-2026Q1, HEAD
Diff to: previous 1.37: preferred, colored
Changes since revision 1.37: +2 -2 lines
emulators/vice: fix package build (PLIST)

If the option vice-x64 was not enabled, x64 is installed as a link to x64sc,
so it should be unconditional in the PLIST.

No version bump: without the option (default), the package was broken.
If you had set the option, there is no change.

Revision 1.37: download - view: text, markup, annotated - select for diffs
Sun Jan 11 14:15:03 2026 UTC (10 months ago) by rhialto
Branches: MAIN
Diff to: previous 1.36: preferred, colored
Changes since revision 1.36: +85 -93 lines
emulators/vice: update to 3.10

changes: many. The full list is at http://vice-emu.sourceforge.io/NEWS .

Revision 1.36: download - view: text, markup, annotated - select for diffs
Fri Jan 31 17:49:02 2025 UTC (21 months, 2 weeks ago) by rhialto
Branches: MAIN
CVS tags: pkgsrc-2025Q4-base, pkgsrc-2025Q4, pkgsrc-2025Q3-base, pkgsrc-2025Q3, pkgsrc-2025Q2-base, pkgsrc-2025Q2, pkgsrc-2025Q1-base, pkgsrc-2025Q1
Diff to: previous 1.35: preferred, colored
Changes since revision 1.35: +28 -12 lines
emulators/vice: update to 3.9

changes: many. The full list is at http://vice-emu.sourceforge.io/NEWS .

There is a new way of screen recording which uses the ffmpeg program and
sockets, instead of the ffmpeg library, which keeps changing its API.
This may or may not work (deadlock), depending on emulator or screen settings.
Using the built-in lossless ZMBV format is a good alternative.

Revision 1.35: download - view: text, markup, annotated - select for diffs
Sat Jan 6 15:35:26 2024 UTC (2 years, 10 months ago) by rhialto
Branches: MAIN
CVS tags: pkgsrc-2024Q4-base, pkgsrc-2024Q4, pkgsrc-2024Q3-base, pkgsrc-2024Q3, pkgsrc-2024Q2-base, pkgsrc-2024Q2, pkgsrc-2024Q1-base, pkgsrc-2024Q1
Diff to: previous 1.34: preferred, colored
Changes since revision 1.34: +73 -92 lines
emulators/vice: update to 3.8

Changes: too many to list; see https://vice-emu.sourceforge.io/NEWS

Revision 1.34: download - view: text, markup, annotated - select for diffs
Sat Dec 31 18:30:00 2022 UTC (3 years, 10 months ago) by rhialto
Branches: MAIN
CVS tags: pkgsrc-2023Q4-base, pkgsrc-2023Q4, pkgsrc-2023Q3-base, pkgsrc-2023Q3, pkgsrc-2023Q2-base, pkgsrc-2023Q2, pkgsrc-2023Q1-base, pkgsrc-2023Q1
Diff to: previous 1.33: preferred, colored
Changes since revision 1.33: +271 -188 lines
emulators/vice: updated to 3.7.1

Small extract from the release notes:

- Added Debian packages of development builds of the SDL2 and Gtk3 UIs and the
  headless build (amd64 only).

  You can find bleeding edge development builds on github:

  https://github.com/VICE-Team/svn-mirror/releases

- Renamed all included ROM files to use a more elaborate naming scheme, for
  example as in "kernal-901227-01.bin".

- CRT emulation improvements:
  - uses measured (different) color coordinates for odd/even lines when possible
  - added option for U-only delay line (1084 style)

- More realistic handling of the case when two paddles are selected at the same
  time.

- Keyboard handling was rewritten / fixed
  - The case when two host keys are mapped to different CBM keys with different
    modifiers is handled differently (correctly) now, so some old keymap(s) may
    expose detail errors as a result - please report them!
  - Fixed Shiftlock/Capslock mapping
  - All extra keys that are not in the regular matrix are handled in generic
    code now.
    - used by C128 40/80 and CAPS keys, Restore
    - extra keys can operate in "non locking" mode

- More realistic behaviour of the virtual drive
  - always return 'files scratched' (instead of 'file not found'), even if the
    file does not exist

- More realistic behaviour when mounting images:
  - When attaching a d64 image to a 1571 drive, create an 'unformatted' image for
    the second side.
  - Create empty tracks for non existing tracks also when mounting gcr images

- SID fixes:
  - use a few more bits for better accuracy when calculating the 8580 filter
    DAC values.
  - fix filter ringing/self oscillating with 6581 and 8580

- CIA fixes:
  - Improved the CIA shift register.
  - Fix the case when pb changes value after changing the control bits for
    pb/pb7 output. Fixes the turn disk space detection of the 'Love' demo.

- Add SPT (Stupid Pet Tricks) userport joystick adapter emulation.

- Fixed use of SO_REUSEPORT on server sockets - this allowed multiple VICE
  instances to bind to the same port, with an indeterminant one receiving each
  incoming connection. Now uses SO_REUSEADDR instead, which allows use of a
  port that remains in the TIME_WAIT state after a previous process closed,
  but does not allow use of a port that is still in active use.

- Add DragonFly BSD support.

- Remove Android support.

and much more, for the full list see the included NEWS file.

Revision 1.33: download - view: text, markup, annotated - select for diffs
Thu Jan 27 18:23:39 2022 UTC (4 years, 9 months ago) by rhialto
Branches: MAIN
CVS tags: pkgsrc-2022Q4-base, pkgsrc-2022Q4, pkgsrc-2022Q3-base, pkgsrc-2022Q3, pkgsrc-2022Q2-base, pkgsrc-2022Q2, pkgsrc-2022Q1-base, pkgsrc-2022Q1
Diff to: previous 1.32: preferred, colored
Changes since revision 1.32: +60 -22 lines
emulators/vice: update to 3.6.1

* Changes in Vice 3.6.1
=======================

This is a service release which fixes some regressions and annoyances reported
by our users after the 3.6 release.

See https://vice-emu.sourceforge.io/NEWS or the NEWS file in the distfile.

Revision 1.32: download - view: text, markup, annotated - select for diffs
Wed Dec 29 14:31:24 2021 UTC (4 years, 10 months ago) by rhialto
Branches: MAIN
Diff to: previous 1.31: preferred, colored
Changes since revision 1.31: +69 -40 lines
emulators/vice: update to 3.6.

Changes: over 250 lines even when condensing the format.
See https://vice-emu.sourceforge.io/NEWS or the NEWS file in the distfile.

In general: lots of added and improved emulations of various extra hardware.

Revision 1.31: download - view: text, markup, annotated - select for diffs
Sat Apr 3 13:07:29 2021 UTC (5 years, 7 months ago) by rhialto
Branches: MAIN
CVS tags: pkgsrc-2021Q4-base, pkgsrc-2021Q4, pkgsrc-2021Q3-base, pkgsrc-2021Q3, pkgsrc-2021Q2-base, pkgsrc-2021Q2
Diff to: previous 1.30: preferred, colored
Changes since revision 1.30: +2 -1 lines
Fix PLIST for options gtk3 and vice-x64.

No version bump needed, since the combination would not build a package:
unexpected file share/applications/vice-org-x64.desktop.

Revision 1.30: download - view: text, markup, annotated - select for diffs
Sat Jan 9 05:20:58 2021 UTC (5 years, 10 months ago) by mef
Branches: MAIN
CVS tags: pkgsrc-2021Q1-base, pkgsrc-2021Q1
Diff to: previous 1.29: preferred, colored
Changes since revision 1.29: +1 -2 lines
(emulators/vice) Add dos2unix-[0-9]* for DEPENDS, adjust PLIST

Revision 1.29: download - view: text, markup, annotated - select for diffs
Fri Jan 1 12:46:03 2021 UTC (5 years, 10 months ago) by rhialto
Branches: MAIN
Diff to: previous 1.28: preferred, colored
Changes since revision 1.28: +237 -133 lines
emulators/vice: update to 3.5

The changes in the NEWS file for this version are more than 450 lines,
but here is a small part:

* Upgrading
===========

If you run into trouble please try removing any VICE configuration files
left over from previous installs.
(vice.ini / .vicerc / vice2.cfg / vice-sdl.ini depending on platform)

Before reporting bugs, always try with a clean config: Run the emulator
with the "-default" command line argument or use "restore default config"
in the UI).


* Changes in Vice 3.5
=====================

This release completes the transition to the new GTK3 based GUI and fixes a
bunch of long standing issues (see below).

** general
----------

- Remove explicit support for OS/2, AmigaOS. These platforms should be able to
  use the SDL port.
- VICE used to store its ROMs, keymaps etc into $PREFIX/lib[64]/vice, which
  isn't correct. Now VICE installs its data into $PREFIX/share/vice, which
  makes a lot more sense. The documentation location has changed as well, now
  the documentation is installed in $PREFIX/share/doc/vice.
  On Windows, the binaries and DLLs have been moved into /bin, according to the
  requirements of GTK/GDK.
- Emulator timing is now directly driven by the host system audio device.
  If sound emulation is disabled, timing is synchronized with the host clock.
  As part of this change, the choice of sound synchronization method has been
  removed.
- Emulation now occurs in blocks of time directly related to the sound fragment
  size. Previously, emulation of an entire frame happened as quickly as possible
  and then the host system would sleep until it is time to emulate the next
  entire frame. This means that user input is now visible to the emulated
  software with lower latency than before.
- Audio latency is much lower on all platforms, and new lower latency defaults
  have been set. Users are encouraged to try using smaller fragment sizes and
  experiment with finding the lowest stable buffer size on their system.
- Support for changing the emulator timing to target generating a specific number
  of video frames per second. Useful for smooth PAL scrolling on a 50Hz CRT, and
  also fun for playing games at 60fps to match a typical LCD screen refresh.
- The default behaviour on CPU JAM was changed to "continue" to better match
  the behaviour of the real machines. Additionally a "CPU JAM" message will
  be displayed in the status bar.
- A "quit emulator" option was added to the CPU JAM dialog
- The CPU JAM dialog now shows the number of the device whose CPU has crashed.
- Proper support for dual drives has been added
- Relative file support on the filesystem device
- Autostarting works from any drive (select the drive in the attach disk dialog)
- Added support for 2nd and 3rd joystick button (potx/poty), currently only via
  keyboard and via unix joystick driver.
- Added mapping for the THEC64 joystick
- New LT.Kernal emulation
- New CMD-HD emulation
- New CMD RAM-Link emulation
- New D9090/60 emulation
- New icons for the applications.
- We now use proper binary prefixes for memory sizes.
  Welcome in the 21st century!
- Recalculate the palette parameters when the videochip type changes, now we can
  actually see the subtle color differences :)
- Emulate a switch present on some compatible datasettes (not the Commodore
  ones). Turning the switch on makes the sound recorded on the tape audible.
- Fixed/improved "native" screenshots. It will now work with all videochips and
  always generate "best effort" results.
- The emulators will look for the config file at an alternative location first,
  before looking at the system wide location.
  - for windows that is the location of the .exe files
  - for Linux that is ~/.vicerc
- Fixed lightgun/pen emulation
  - use poty instead of potx for trigger for magnum lightphaser and inkwell
    lightpen
  - tweak lightphaser offset against a bunch of games
- Handling of settings and resources was improved a bit:
  - always reset resources to default before loading a settings file
  - new "-addconfig" option (or "load additional settings") loads additional
    resources from a file without resetting to defaults before. this can be used
    to keep custom setups separate from the regular settings.
- Fixed sysfile search path order.
  The order now is $HOME/.local -> path-of-binary -> VICE_DATADIR
- Fixed a bug in .tap file handling that caused some .tap files to not work in
  the preview widget(s)
- A bunch of files have been removed from the source tree because they didn't
  really belong there and/or contained outdated info:
  - hardware-sids.txt, the old info is now at
    https://vice-emu.pokefinder.org/index.php/Hardware_SID_Status
  - SDL-support.txt, the old info is now at
    https://vice-emu.pokefinder.org/index.php/SDL_Status
  - ffmpeg-support.txt, the old info is now at
    https://vice-emu.pokefinder.org/index.php/FFMPEG_Status
- Another bunch of files were removed because their content was hopelessly
  outdated and/or could be moved to other files:
  - removed ancient CHANGELOG files. Read NEWS for the recent changes. Refer to
    the SVN log for the gory details.
  - moved contents from FEEDBACK to README

** build system
---------------

Many changes and simplifications were made in the build system, to make
it more reproducible and match the expected standard behaviour:

etc etc.

Revision 1.28: download - view: text, markup, annotated - select for diffs
Tue Dec 31 14:42:22 2019 UTC (6 years, 10 months ago) by rhialto
Branches: MAIN
CVS tags: pkgsrc-2020Q4-base, pkgsrc-2020Q4, pkgsrc-2020Q3-base, pkgsrc-2020Q3, pkgsrc-2020Q2-base, pkgsrc-2020Q2, pkgsrc-2020Q1-base, pkgsrc-2020Q1
Diff to: previous 1.27: preferred, colored
Changes since revision 1.27: +71 -60 lines
emulators/vice: update to 3.4

Much shortened from vice-3.4/NEWS or http://vice-emu.sourceforge.net/NEWS :

* Changes in Vice 3.4
=====================

We also needs support in fixing the various keyboard mappings, please test the
keyboard in your favourite OS and port and report any problems.

** General
----------

- Remove support for Syllable OS, SCO, QNX4, QNX6, SGI, AIX, OpenStep/NextStep/
  Rhapsody, Solaris/OpenIndiana and remaining traces of Minix, NeXT, SKYOS,
  UNIXWARE, Sortix

- Remove remaining traces of support for WATCOM, MSVC, OpenWatcom

- Remove aRts support

- Remove YUV rendering

- Remove generation of .chm, .hlp and .info files. Please use the .pdf or .html

- skip building x64 unless --enable-x64 is passed to configure

- do not use the new/experimental 8580 filters unless --enable-new8580filter
  is passed to configure

- update pattern generator for uninitialized ram. changed defaults so all
  raminitpattern tests pass.

- remove block device disk image (rawdrive) "support". in linux it was never
  needed (just use the device file) and on windows it was never implemented.

- added support for the IP232 protocol that was used by the long lost VICE1.19
  hack, and which is supported by tcpser for emulating DTR/DCD (carrier detect)

- various userport rs232 fixes

- always save gifs as gif89

- added a couple shift flags to keyboard maps to support virtual cbm/ctrl and
  mandatory pressed host modifiers. not all keymaps have been updated yet.

- ACIA IRQ fix

- create empty half tracks when mounting d64. fixes skew.d64

- new headless port that can be enabled by passing --enable-headlessui to
  configure. this can be used to build an emulator without video output, which
  may be useful for scripting.

[ omitted sections: ]
** Autostart fixes
** Snapshot fixes
** 6510 fixes
** VIC-II fixes
** VIC fixes
** SID fixes
** Monitor
** vdrive
** C-64 fixes
** C-128 fixes
** Gtk3 UI
** SDL fixes
** macOS fixes

Revision 1.27: download - view: text, markup, annotated - select for diffs
Mon Dec 31 15:38:55 2018 UTC (7 years, 10 months ago) by rhialto
Branches: MAIN
CVS tags: pkgsrc-2019Q4-base, pkgsrc-2019Q4, pkgsrc-2019Q3-base, pkgsrc-2019Q3, pkgsrc-2019Q2-base, pkgsrc-2019Q2, pkgsrc-2019Q1-base, pkgsrc-2019Q1
Diff to: previous 1.26: preferred, colored
Changes since revision 1.26: +58 -109 lines
emulators/vice: update to 3.3.

* Changes in VICE 3.3
=====================

This release stabilizes and introduces the GTK3 UI as the primary user interface
for all major ports. For "lesser" platforms we still have the SDL1/SDL2 based
interface. All other user interfaces have been removed. RIP

** General
----------

- Old, unmaintained, ports removed:
  * MacOS Cocoa: use SDL or Gtk3
  * WinVice: use SDL or Gtk3
  * BeOS/Haiku: use SDL
  * AmigaOS: use SDL
  * Unix Xaw: use SDL or Gtk3
  * Unix Gtk2: use SDL or Gtk3
  * OS/2: use SDL

- Fix building against external ffmpeg >= 4.0

- Fix errors in multi-SID code

- added single SNES pad emulation (compatible to Ninjas adapter/TrapThem64)

- Make VICE much faster by using -O3 vs -O2

- add a slot number before the literal name of a game-controller, which is less
  confusing when more than one controller of the same type is used

- fix parsing of the commandline with -config first

- added dutch to list of keyboard mappings

(more details in the included share/doc/vice/NEWS file)

Revision 1.26: download - view: text, markup, annotated - select for diffs
Sat Jul 14 16:05:19 2018 UTC (8 years, 4 months ago) by maya
Branches: MAIN
CVS tags: pkgsrc-2018Q4-base, pkgsrc-2018Q4, pkgsrc-2018Q3-base, pkgsrc-2018Q3
Diff to: previous 1.25: preferred, colored
Changes since revision 1.25: +76 -16 lines
vice: update to 3.2.

From Rhialto (maintainer) in PR pkg/53449.
I had to add DEPENDS on xa65. This might only be a BUILD_DEPENDS.

To build on netbsd-current, I needed the hack in
https://mail-index.netbsd.org/tech-kern/2018/07/14/msg023684.html
(I hope to avoid needing to patch the package!)

renamed the "gtk3" option to "gtk3wip", and removed it from
PKG_SUGGESTED_OPTIONS because the gtk3 gui is a Work In
Progress. See configure --help:
  --enable-native-gtk3ui  enables WIP native GTK3 UI support
  --enable-debug-gtk3ui    enables debugging for the WIP GTK3 port


Notable changes in VICE 3.2

- New (experimental) GTK3 native port, this and the SDL(2) port will replace
  all other ports (which will get removed) in VICE 3.3 and onward.

Full NEWS: https://sourceforge.net/p/vice-emu/code/HEAD/tree/tags/v3.2/vice/NEWS

Revision 1.25: download - view: text, markup, annotated - select for diffs
Wed Aug 16 17:54:09 2017 UTC (9 years, 3 months ago) by adam
Branches: MAIN
CVS tags: pkgsrc-2018Q2-base, pkgsrc-2018Q2, pkgsrc-2018Q1-base, pkgsrc-2018Q1, pkgsrc-2017Q4-base, pkgsrc-2017Q4, pkgsrc-2017Q3-base, pkgsrc-2017Q3
Diff to: previous 1.24: preferred, colored
Changes since revision 1.24: +197 -26 lines
Changes in VICE 3.1

General
- New support for double sided 1571 g64 and p64 images.
- SID filter improvements.

C64(SC)/SCPU64/C64DTV/C128 changes
- New joyport script64 dongle emulation.
- New joyport vizawrite64 dongle emulation.
- Fixed joyport paperclip64 dongle emulation.
- Fixed StarDOS emulation.

XVIC
- Fixed VIA emulation.

C1541
- Fixed commands and added new commands.

BeOS/Haiku changes
- New drag & drop support: dragging a file from Tracker into the window
  now autostarts it, and dragging text into the window pastes it.

Revision 1.24: download - view: text, markup, annotated - select for diffs
Wed Dec 12 09:58:03 2012 UTC (13 years, 11 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2017Q2-base, pkgsrc-2017Q2, pkgsrc-2017Q1-base, pkgsrc-2017Q1, pkgsrc-2016Q4-base, pkgsrc-2016Q4, pkgsrc-2016Q3-base, pkgsrc-2016Q3, pkgsrc-2016Q2-base, pkgsrc-2016Q2, pkgsrc-2016Q1-base, pkgsrc-2016Q1, pkgsrc-2015Q4-base, pkgsrc-2015Q4, pkgsrc-2015Q3-base, pkgsrc-2015Q3, pkgsrc-2015Q2-base, pkgsrc-2015Q2, pkgsrc-2015Q1-base, pkgsrc-2015Q1, pkgsrc-2014Q4-base, pkgsrc-2014Q4, pkgsrc-2014Q3-base, pkgsrc-2014Q3, pkgsrc-2014Q2-base, pkgsrc-2014Q2, pkgsrc-2014Q1-base, pkgsrc-2014Q1, pkgsrc-2013Q4-base, pkgsrc-2013Q4, pkgsrc-2013Q3-base, pkgsrc-2013Q3, pkgsrc-2013Q2-base, pkgsrc-2013Q2, pkgsrc-2013Q1-base, pkgsrc-2013Q1, pkgsrc-2012Q4-base, pkgsrc-2012Q4
Diff to: previous 1.23: preferred, colored
Changes since revision 1.23: +44 -10 lines
Update to 2.4, provided by Olaf 'Rhialto' Seibert in PR/47223.
While here, add missing tex-pdftex build dependency (for vice.pdf) and
fix ffmpeg option build.

Changes: Lots of extra hardware is emulated (including the long
awaited SuperPET 6809 parts), and several new host platforms are
added.

Revision 1.22.6.1: download - view: text, markup, annotated - select for diffs
Sat Apr 16 21:27:34 2011 UTC (15 years, 7 months ago) by spz
Branches: pkgsrc-2011Q1
Diff to: previous 1.22: preferred, colored; next MAIN 1.23: preferred, colored
Changes since revision 1.22: +7 -29 lines
Pullup ticket #3410 - requested by wiz
emulators/vice: build fix for NetBSD 5

Revisions pulled up:
- emulators/vice/DESCR                                          1.2
- emulators/vice/Makefile                                       1.89-1.90
- emulators/vice/PLIST                                          1.23
- emulators/vice/PLIST.sdl                                      1.1
- emulators/vice/PLIST.x11                                      1.1
- emulators/vice/distinfo                                       1.38
- emulators/vice/options.mk                                     1.6
- emulators/vice/patches/patch-aa                               1.11
- emulators/vice/patches/patch-ab                               1.11
- emulators/vice/patches/patch-ac                               deleted
- emulators/vice/patches/patch-ad                               deleted

-----------------------------------------------------------------------------
   Module Name:	pkgsrc
   Committed By:	wiz
   Date:		Mon Apr  4 13:42:08 UTC 2011

   Modified Files:
   	pkgsrc/emulators/vice: DESCR Makefile PLIST distinfo options.mk
   	pkgsrc/emulators/vice/patches: patch-aa patch-ab
   Added Files:
   	pkgsrc/emulators/vice: PLIST.sdl PLIST.x11
   Removed Files:
   	pkgsrc/emulators/vice/patches: patch-ac patch-ad

   Log Message:
   Update to 2.3, provided by Olaf 'Rhialto' Seibert in PR 44820, with a
   slight fix.

   * Changes in VICE 2.3
   ======================

   ** General
   ----------

   - Added x64sc, the accurate C64 emulator:

     * VIC-II emulation rewritten from scratch using results from extensive
       testing with newly written test programs on real hardware.

     * Emulation is done on a cycle by cycle basis combined with pixel exact
       dot clock domain handling.

     * Accurate handling of all possible in-line splits of VIC-II registers
       and graphics data.

     * C64 model and even individual chip revisions can be selected for very
       detailed emulation of their differences.

     * Equally accurate PAL, NTSC and PAL-N emulation.

     We believe x64sc is one of the most accurate C64 emulators at the
     moment.

   - Drive improvements, including weak bit emulation.

   - Major reSID overhaul:

     * Emulation of all known pipeline delays for full cycle accuracy.
     * New shift register model based on revectorized die photograps.
     * Accurate DAC models based on revectorized die photograps.
     * Emulation of floating waveform DAC input for waveform 0.
     * Advanced 6581 transistor level filter model based on revectorized
       die photograps, yielding unprecedented accuracy.

   - CRT Emulation (former "PAL emulation") is now available regardless of
     video mode or -chip and works in all emulators.

     NOTE: Color gamma range changed. You may need to set to 2.200 manually.
     (ColorGamma=2200)

   - Added "True aspect ratio" option.

   - Sound buffer overflows reduced and the error replaced with a warning.

   - Various monitor improvements (io details, expansion port status ...)

   - Removed little used Emulator ID feature.

   - VIA wrap handling rewritten to fix problems with timer 2.

   - Added autostart option to do LOAD ,8 instead of ,8,1.

   - RESTORE key presses are now distributed randomly across a frame.

   - Improved accuracy of CIA interrupts. (6526/6526A selectable)

   ** C64/C128 changes
   -------------------

   - Cartridge emulation improvements. Many broken cartridges fixed, and the
     following ones added:

     * Action Replay 2
     * Action Replay 3
     * Capture
     * Diashow Maker
     * EXOS
     * Final Cartridge Plus
     * Freeze Frame
     * Freeze Machine
     * Game Killer
     * MACH 5
     * Magic Voice
     * MMC Replay
     * Prophet 64
     * Snapshot 64
     * Super Explode V5
     * Super Snapshot

   - Added emulation of the passthrough port of MMC64, Magic Voice and IEEE488
     cartridges.

   - CIA TOD 50/60 Hz toggle emulation fixed.

   - Improved 1351/paddles port MUX emulation.

   ** C64 changes
   --------------

   - Added Drean (PAL-N) emulation.

   - Fixed bug with autostart mode Inject-to-RAM.  It now writes to RAM under
     I/O correctly.

   ** C128 changes
   ---------------

   - Fixed a bug with autostarting t64 images.

   ** VIC20 changes
   ----------------

   - Added Vic Flash Plugin cartridge emulation.

   - Fixed video cache & reverse bug.

   - Fixed bug in attaching 4kB cartridges.

   - Fixed autostarting bug, mostly seen with tape images.

   ** PLUS4 changes
   ----------------

   - Fixed crashes in NTSC mode.

   - Added v364 speech emulation.

   ** PET changes
   --------------

   - Added DWW emulation.

   - Added userport DAC emulation.

   ** CBM2 changes
   ---------------

   - Split 5x0 and 6x0/7x0 settings in the configuration file.

   ** Unix changes
   ---------------

   - (Xaw) The menus can now be operated without holding the
     mouse button down. Keyboard control is also available
     (Shift-Alt-Z for left menu, Shift-Alt-X for right menu).

   - (Xaw) Lightpen/gun support added.

   - (GTK+) Fixed aspect ratio option added.

   ** SDL UI changes
   -----------------

   - Added vsid UI, FFMPEG and printer menus. The UI is complete.

   To generate a diff of this commit:
   cvs rdiff -u -r1.1 -r1.2 pkgsrc/emulators/vice/DESCR
   cvs rdiff -u -r1.88 -r1.89 pkgsrc/emulators/vice/Makefile
   cvs rdiff -u -r1.22 -r1.23 pkgsrc/emulators/vice/PLIST
   cvs rdiff -u -r0 -r1.1 pkgsrc/emulators/vice/PLIST.sdl \
       pkgsrc/emulators/vice/PLIST.x11
   cvs rdiff -u -r1.37 -r1.38 pkgsrc/emulators/vice/distinfo
   cvs rdiff -u -r1.5 -r1.6 pkgsrc/emulators/vice/options.mk
   cvs rdiff -u -r1.10 -r1.11 pkgsrc/emulators/vice/patches/patch-aa \
       pkgsrc/emulators/vice/patches/patch-ab
   cvs rdiff -u -r1.19 -r0 pkgsrc/emulators/vice/patches/patch-ac
   cvs rdiff -u -r1.14 -r0 pkgsrc/emulators/vice/patches/patch-ad

-----------------------------------------------------------------------------
   Module Name:	pkgsrc
   Committed By:	tron
   Date:		Sat Apr 16 11:05:33 UTC 2011

   Modified Files:
   	pkgsrc/emulators/vice: Makefile

   Log Message:
   Fix build problem under NetBSD/i386 current.


   To generate a diff of this commit:
   cvs rdiff -u -r1.89 -r1.90 pkgsrc/emulators/vice/Makefile

Revision 1.23: download - view: text, markup, annotated - select for diffs
Mon Apr 4 13:42:08 2011 UTC (15 years, 7 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2012Q3-base, pkgsrc-2012Q3, pkgsrc-2012Q2-base, pkgsrc-2012Q2, pkgsrc-2012Q1-base, pkgsrc-2012Q1, pkgsrc-2011Q4-base, pkgsrc-2011Q4, pkgsrc-2011Q3-base, pkgsrc-2011Q3, pkgsrc-2011Q2-base, pkgsrc-2011Q2
Diff to: previous 1.22: preferred, colored
Changes since revision 1.22: +8 -30 lines
Update to 2.3, provided by Olaf 'Rhialto' Seibert in PR 44820, with a
slight fix.

* Changes in VICE 2.3
======================

** General
----------

- Added x64sc, the accurate C64 emulator:

  * VIC-II emulation rewritten from scratch using results from extensive
    testing with newly written test programs on real hardware.

  * Emulation is done on a cycle by cycle basis combined with pixel exact
    dot clock domain handling.

  * Accurate handling of all possible in-line splits of VIC-II registers
    and graphics data.

  * C64 model and even individual chip revisions can be selected for very
    detailed emulation of their differences.

  * Equally accurate PAL, NTSC and PAL-N emulation.

  We believe x64sc is one of the most accurate C64 emulators at the
  moment.

- Drive improvements, including weak bit emulation.

- Major reSID overhaul:

  * Emulation of all known pipeline delays for full cycle accuracy.
  * New shift register model based on revectorized die photograps.
  * Accurate DAC models based on revectorized die photograps.
  * Emulation of floating waveform DAC input for waveform 0.
  * Advanced 6581 transistor level filter model based on revectorized
    die photograps, yielding unprecedented accuracy.

- CRT Emulation (former "PAL emulation") is now available regardless of
  video mode or -chip and works in all emulators.

  NOTE: Color gamma range changed. You may need to set to 2.200 manually.
  (ColorGamma=2200)

- Added "True aspect ratio" option.

- Sound buffer overflows reduced and the error replaced with a warning.

- Various monitor improvements (io details, expansion port status ...)

- Removed little used Emulator ID feature.

- VIA wrap handling rewritten to fix problems with timer 2.

- Added autostart option to do LOAD ,8 instead of ,8,1.

- RESTORE key presses are now distributed randomly across a frame.

- Improved accuracy of CIA interrupts. (6526/6526A selectable)

** C64/C128 changes
-------------------

- Cartridge emulation improvements. Many broken cartridges fixed, and the
  following ones added:

  * Action Replay 2
  * Action Replay 3
  * Capture
  * Diashow Maker
  * EXOS
  * Final Cartridge Plus
  * Freeze Frame
  * Freeze Machine
  * Game Killer
  * MACH 5
  * Magic Voice
  * MMC Replay
  * Prophet 64
  * Snapshot 64
  * Super Explode V5
  * Super Snapshot

- Added emulation of the passthrough port of MMC64, Magic Voice and IEEE488
  cartridges.

- CIA TOD 50/60 Hz toggle emulation fixed.

- Improved 1351/paddles port MUX emulation.

** C64 changes
--------------

- Added Drean (PAL-N) emulation.

- Fixed bug with autostart mode Inject-to-RAM.  It now writes to RAM under
  I/O correctly.

** C128 changes
---------------

- Fixed a bug with autostarting t64 images.

** VIC20 changes
----------------

- Added Vic Flash Plugin cartridge emulation.

- Fixed video cache & reverse bug.

- Fixed bug in attaching 4kB cartridges.

- Fixed autostarting bug, mostly seen with tape images.

** PLUS4 changes
----------------

- Fixed crashes in NTSC mode.

- Added v364 speech emulation.

** PET changes
--------------

- Added DWW emulation.

- Added userport DAC emulation.

** CBM2 changes
---------------

- Split 5x0 and 6x0/7x0 settings in the configuration file.

** Unix changes
---------------

- (Xaw) The menus can now be operated without holding the
  mouse button down. Keyboard control is also available
  (Shift-Alt-Z for left menu, Shift-Alt-X for right menu).

- (Xaw) Lightpen/gun support added.

- (GTK+) Fixed aspect ratio option added.

** SDL UI changes
-----------------

- Added vsid UI, FFMPEG and printer menus. The UI is complete.

Revision 1.22: download - view: text, markup, annotated - select for diffs
Sat Jul 24 09:44:57 2010 UTC (16 years, 3 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2011Q1-base, pkgsrc-2010Q4-base, pkgsrc-2010Q4, pkgsrc-2010Q3-base, pkgsrc-2010Q3
Branch point for: pkgsrc-2011Q1
Diff to: previous 1.21: preferred, colored
Changes since revision 1.21: +27 -70 lines
Update to 2.2, based on wip package by Olaf Seibert, with additional
fixes to get png, jpeg, and ffmpeg support.

* Changes in VICE 2.2
======================

** General
----------

- On autostart, do not change true drive emulation (TDE) anymore by
  default. The old behaviour can be switched on again by specifiying
  -autostart-handle-tde on the command line.
  There is one drawback of this behaviour: If TDE is switched on, an
  image attached must fit to the drive type set. For example, when you
  attach a .D81, you must have the drive type set to 1581, or the
  autostart will fail.

- Added automatic Warp mode during autostart. If this resource is enabled then
  VICE automatically enables the warp mode and then loads a file. After
  loading the warp mode is disabled again and then the program is started.

- Autostarting a PRG file can now be done in three different ways:

  * "Virtual FS": This mode mounts the directory where the file resides as a
    virtual filesystem on drive #8 and then loads the PRG via virtual drive
    traps. This was the only way of autostarting in previous VICE versions
    and is still the default.

  * "Inject to RAM": The PRG file is loaded from VICE directly into the RAM of
    the emulated machine. Then the memory setup of a Basic LOAD is simulated
    and the program is run. This is the fastest mode available but may lack
    compatibility as no actual load operation was performed in the emulator.
    However, no drive setup is altered during the operation.

  * "Diskimage": VICE creates a temporary new disk image and copies the
    contents of the PRG file onto it. Then this image is mounted in drive #8
    and the program is loaded from there. If TDE is enabled then the load
    operation is most compatible. The disk image stays attached until a new
    image is mounted.

- Improved PAL emulation is now available for Unix/Xaw XVideo mode, and
  AmigaOS. Only the YUV packed modes work, the planar modes still use the
  old code paths, though.

- Sound core has been reworked to enable lower latency of operation.
  Approximately 50 ms latency values are now routinely reached, and some
  people have reported that as low as 30 ms still works for them.

- New SDL port. See ReadmeSDL.txt for details.

- New win64 ports, both amd64/x64 and ia64 are supported (msvc compile only).

- New SDL based armle, mipsle, ppcbe and shle QNX 6.x ports.

- New SDL based M68k and sparc SunOS ports.

- New SDL based Syllable port.

- New SDL based Dingoo port.

- Remote monitor (in other words: TCP/IP interface to VICE monitor) added.

- Fixed non-6502/6510 CPU handling in monitor.

** C64/C128 changes
-------------------

- ReSID's resampler has been optimized with MMX assembly. Some long-standing
  bugs in resample-interpolate mode were also fixed.

- ReSID-FP has been optimized, too. It clocks the analog parts at half the
  rate now, which saves CPU during filter emulation especially for 6581 modes.

- Added SFX Sound Sampler and SFX Sound Expander emulation.

- Added EasyFlash cartridge emulation.

- Added paddle emulation.

- Added lightpen/lightgun emulation, currently only available for the following
  ports: SDL, GTK+, cocoa, win32/win64 and msdos.

- Added support for the following userport joystick adapters: CGA/Protovision,
  DXS/HIT, PET (normally only used on the PET/CBM2), Hummer (normally only
  used on the C64DTV) and OEM (normally only used on the VIC20).

** C128 changes
---------------

- Added RAM banks 2 and 3 support.

- Improved the VDC emulation.

- Stereo SID $D7xx range support.

** VIC20 changes
----------------

- New cycle exact emulation core.  Handles accesses to unconnected
  address space and in-line graphics data changes correctly.
  (fixes "Impossiblator 3" and others)

- Improved VIC emulation (in-line color/reverse mode changes on half-chars).

- Cartridge handling rewritten.

- Added Mega-Cart cartridge emulation.

- Added Final Expansion cartridge emulation.

- Default memory configuration changed from full to unexpanded.

- Added paddle emulation.

- Added lightpen/lightgun emulation, currently only available for the following
  ports: SDL, GTK+, cocoa, win32/win64 and msdos.

- Corrected the joystick support, since the VIC20 can only have one joystick
  attached on the joystick port.

- Added support for the following userport joystick adapters: CGA/Protovision
  (normally only used on the C64/C128), PET (normally only used on the
  PET/CBM2), Hummer (normally only used on the C64DTV) and OEM.

** PLUS4 changes
----------------

- Added Digibooster SID Cart add-on emulation.

- Added SID Cart joystick port emulation.

- Fixed bug in tape recording.

- Improved graphics handling.

** C64DTV changes
-----------------

- Replaced old DTVSID emulation with ReSID-DTV.

- Minor bug fixes and emulation improvements.

- Added support for the following userport joystick adapters: CGA/Protovision
  (normally only used on the C64/C128), PET (normally only used for the PET),
  Hummer and OEM (normally only used on the VIC20).

** PET changes
--------------

- Corrected the joystick support, since the only way a PET can use a joystick
  is by a userport joystick adapter, the following userport joystick adapters
  are currently supported: CGA/Protovision (normally only used on the
  C64/C128), PET, Hummer (normally only used on the C64DTV) and OEM (normally
  only used on the VIC20).

** CBM2 changes
---------------

- Corrected the joystick support, since the only way a CBM2 can use a joystick
  is by a userport joystick adapter, the following userport joystick adapters
  are currently supported: CGA/Protovision (normally only used on the
  C64/C128), PET, Hummer (normally only used on the C64DTV) and OEM (normally
  only used on the VIC20).

** Unix changes
---------------

- Rudimentary PulseAudio sound driver has been added.

- Added support for dynamic loading of FFMPEG libraries.

- Added support for dynamic loading of OpenCBM and Lame library

* Changes in VICE 2.1
======================

** General
----------

- The VICEplus project has been joined with VICE. Thus, x64dtv is now
  part of VICE.

- We can be contacted via IRC: #vice-dev on freenode

- Added a more accurate ReSID engine using floating point math (ReSID-FP).

- Added support for the USB HardSID.

- PAL emulation has been rewritten and optimized.

- Fixed the ACIA 6551 emulation. (x64/x128/xcbm2/xpet/xplus4)

- Monitor commands help text is now translated too
  (in ports where translation is available at all)

- Monitor IO command now displays IO area even if it is currently
  banked out.

- GCR file handling (.G64) issues an error message if the .G64 does not
  have the expected outline. Before, VICE just silently ignored such
  files.

- IRQ handling fix

** C64/C128 changes
-------------------

- Fixed the digimax sound generation.

- Added the RR clockport disable functionality at $DF00.0. Allows
  to disable the RRnet.

- Improved REU compatibility and timing.

** C64 changes
--------------

- Added isepic cartridge emulation.

- Added Double Quick Brown Box cartridge emulation.

** VIC20 changes
----------------

- Improved the sound emulation.

- Fixed the lowest note bug.

- Improved VIC emulation (exact in-line color/reverse mode changes).

** C64DTV changes
-----------------

- New emulator.

** Unix changes
---------------

- XRandR fullscreen implemented

- Command line option `-fullscreen' is supposed to do something
  useful.

- Vsync code imported from win32 (based on openGL extension).
  see also doc/openGLsync-howto.txt.

- Vidmode (fullscreen support) is broken and therefore marked as
  deprecated. It will be removed in the next release if no-one takes
  responsibility to fix the broken code and is willing to maintain the
  code.

- PAL Emulation (new implementation, improved speed) should be usable
  again (it was broken on certain display depths).

- Log messages are always english.

- Only x11 keymaps will be installed when doing a 'make install'.

- MIDI cartridge emulation for x128, x64 and xvic.

* Changes in VICE 2.0
======================

** General
----------

- VICE development has moved to public services:
  http://sf.net/projects/vice-emu
  You can read the latest development in the Subversion
  repository, file bug reports, and similar things.
  Check it out!

- New Openserver 5.x, Openserver 6.x and Unixware ports.

- New AROS64 port.

- New QNX 4.x port.

- New HPUX (HPPA and IA64) ports.

- New SkyOS port.

- New Atari Mint port.

- New Solaris Express aka OpenSolaris aka Solaris 11 port.

** C64/C128 changes
-------------------

- Improved $01 behaviour with regards to unused bit fall-off.

- New experimental NEOS and Amiga mouse support.

- Added a working RTC to the emulation of the IDE64 cartridge.

- New more precise PAL emulation, works only with double size
  and double scan.

- Added support for the Action Replay 4 and StarDos cartridges.

- Improved REU compatibility

- Fixed CPU timing bug introduced in 1.22 (demo "Borderless").

- Fixed bugs in the CIA emulation (demo "So-phisticated",
  W. Lorenz testsuite).

- Fixed various bugs in VIC-II emulation: Sprite x-positioning,
  Latch X/Y, video mode changes, DEN bit handling, raster IRQ,
  NTSC sprites and sprites in full/debugging border mode (list
  of fixed demos/games too long to mention here).

- RESTORE key is handled differently now, fixing an NMI bug
  because the NMI was asserted too long before.

** VIC20 changes
----------------

- Added unconnected c-bus floating byte support.

- New more precise PAL emulation, works only with double size
  and double scan.

** PET changes
--------------

- Added support for toggling CB2 sound output line.

** PLUS4 changes
----------------

- New more precise PAL emulation, works only with double size
  and double scan.

** Drive changes
----------------

- Fixed block allocation and interleave.

** Unix changes
---------------

- Broken DGA1/DGA2 code removed

- XRandR fullscreen implemented for all (but CRTC/VDC) videochips.

- XRandR/Fullscreen can now toggle the Statusbar/Menu

- Fixed unix mouse for single sized display.

- Fixed mouse grab and xaw menu popup.

- After a CPU jam user can select to resume emulation without
  reset.

** Miscellaneous changes
------------------------

- Added support for more 3rd party basic extenders to petcat.

- Extended BMP saving to support 24bit.

- Fixed the joystick code of all emulators to handle state changes
  on both joysticks at the same time.

- New monitor commands and features.

- New memmap feature which allows tracking of memory accesses,
  activated by the configure option --enable-memmap.

- Fixed bug in ffmpeg/FFV1 driver. Should be really lossless now.

Revision 1.21: download - view: text, markup, annotated - select for diffs
Sun Jun 14 17:51:09 2009 UTC (17 years, 5 months ago) by joerg
Branches: MAIN
CVS tags: pkgsrc-2010Q2-base, pkgsrc-2010Q2, pkgsrc-2010Q1-base, pkgsrc-2010Q1, pkgsrc-2009Q4-base, pkgsrc-2009Q4, pkgsrc-2009Q3-base, pkgsrc-2009Q3, pkgsrc-2009Q2-base, pkgsrc-2009Q2
Diff to: previous 1.20: preferred, colored
Changes since revision 1.20: +1 -12 lines
Remove @dirrm entries from PLISTs

Revision 1.20: download - view: text, markup, annotated - select for diffs
Thu Aug 30 12:22:59 2007 UTC (19 years, 2 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2009Q1-base, pkgsrc-2009Q1, pkgsrc-2008Q4-base, pkgsrc-2008Q4, pkgsrc-2008Q3-base, pkgsrc-2008Q3, pkgsrc-2008Q2-base, pkgsrc-2008Q2, pkgsrc-2008Q1-base, pkgsrc-2008Q1, pkgsrc-2007Q4-base, pkgsrc-2007Q4, pkgsrc-2007Q3-base, pkgsrc-2007Q3, cwrapper, cube-native-xorg-base, cube-native-xorg
Diff to: previous 1.19: preferred, colored
Changes since revision 1.19: +13 -1 lines
Update to 1.22:

* Changes in VICE 1.22
======================

** C128 changes
---------------

- Added 2 MHz mode support (experimental).

- The cursor keys are mapped differently in C64-mode now.

- Fixed C64-mode autostart support.

** VIC20 changes
----------------

- Improved the sound emulation where the 'volume change click' is
  concerned, and normalized the audio output level.

** VIC-II
---------

- The VIC-II border mode can be selected now (normal, full, debug).

- Some sprite fixes needed for Krestage 3 demo.

** Drive changes
----------------

- Improved drive LED emulation.

** Unix changes
---------------

- Fixed the "black screen" bug caused by some X11 library security
  update.

- Fixed the usb support for bsd based platforms.

- Changed the preferred libdir and docdir for netbsd and freebsd.

- Xaw/XRandR fullscreen mode is supposed to work.

** C1541 changes
----------------

- Fixed some unlynx bugs.

Revision 1.19: download - view: text, markup, annotated - select for diffs
Sun Apr 15 19:13:08 2007 UTC (19 years, 7 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2007Q2-base, pkgsrc-2007Q2
Diff to: previous 1.18: preferred, colored
Changes since revision 1.18: +4 -1 lines
Update to 1.21:

* Changes in VICE 1.21
======================

** General
----------

- Added sound recording support.

- Added aiff, iff, mp3 and wav sound dump drivers.

** C128 changes
---------------

- Added digimax support.

- Fixed some minor VDC graphics bugs.

** C64 changes
--------------

- Added MMC64 support.

- Added digimax support.

- Added Action Replay III support.

- Improved compatibility of TFE emulation.

** PET changes
--------------

- Added SID cartridge support.

- Extended the PET REU emulation to include 512/1024/2048KB.

** PLUS4 changes
----------------

- Added SID cartridge support.

- Fixed some minor TED graphics bug.

** VIC20 changes
----------------

- Added SID cartridge support.

** Drive changes
----------------

- Added support for Dolphin DOS 2 & 3 and Professional DOS 1571.
  The GUI is partially missing, command line switches have to be used.

** Unix changes
---------------

- New Hungarian translations.

- Fixed some bug in the XAW file selector.

- New fullscreen mode based on XRandR - although restriced to XVideo
  HW scaling. See also BUGS.

- Raster synchronization based on openGL extension
  `GLX_SGI_video_sync'. See openGL-sync.txt for details.

- Fixed colormap handling on certain Gnome systems (sporadic black
  menus, e.g. reported by some FC users).

- ffmpeg support should work again.

** MS-Windows changes
---------------------

- Added Hungarian translations.

- Added giflib/libungif dll support.

** OS/2 changes
---------------

- Fixed a video resource bug that prevented VICE from running.

** Mac OSX X11 changes
----------------------

- Added Gtk+ Port

- Introduced single "smart" Application Bundle VICE.app

- Added command line launcher for Terminal.app and xterm

- Added build scripts for all external libraries and universal builds
  of VICE

** AmigaOS changes
------------------

- Fixed some UI dialog bugs.

- Added Hungarian translations.

- Added more (previously missing) UI elements.

- Added native MorphOS icons.

- Fixed for native AmigaOS4 compile.

- Added VBCC build scripts.

- New experimental ppc-warpos port.

- New experimental ppc-powerup port.

** BeOS changes
---------------

- Fixed to also run on ZETA.

- New ppc-beos port.

- Added (previously missing) UI elements.

** Miscellaneous changes
------------------------

- Fixed the setting of illegal filenames.

Revision 1.18: download - view: text, markup, annotated - select for diffs
Wed Feb 7 19:43:29 2007 UTC (19 years, 9 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2007Q1-base, pkgsrc-2007Q1
Diff to: previous 1.17: preferred, colored
Changes since revision 1.17: +18 -2 lines
Update to 1.20:

* Changes in VICE 1.20
======================

** General
----------

- New GP2X port.

- New AmigaOS3, AmigaOS4, MorphOS and AROS (x86/ppc) ports.

- Mac OSX X11 port is included in the main distribution now.

- Fixed some unusual CPU opcodes.

** C64 changes
--------------

- Fixed some longstanding RMW to IO area VIC-II DMA timing bug.

- Added Mikro Assembler, Dela EP7x8, Dela EP256 and Rex EP256
  cart support.

- Fixed the KCS cart emulation.

- Added swiftlink and turbo232 support.

- Added +256k memory expansion support.

- Added I/O source read collision detection support, making
  simultanious use of multiple expansions possible, like on
  the real machine.

- Fixed the RR-net address decoding and REU compatibility.

- Fixed a problem with traps using the SX Kernal ROM.

- Some IDE64 ultimax bug has been fixed.

** PET changes
--------------

- Added 128kb REU memory expansion support.

** PLUS4 changes
----------------

- Added 256k csory memory expansion support.

- Added 256k, 1024k and 4096k hannes memory expansion support.

** Unix changes
---------------

- Gnome1 is no longer supported.

- Gnome2 is now supported - everthing except the Image preview with
  CBM font should work.

- Gnome 2 port supports dimmable drive LED now.

- Added experimental ParSID support.

- Added support for minix3.

- Fixed some compile problems with the ffmpeg library.

** MS-Windows changes
---------------------

- Added experimental ParSID support.

** MS-DOS changes
-----------------

- Added experimental ParSID support.

** Mac OSX X11 changes
----------------------

- Added support for Intel build.

- Added USB joystick support.

** Miscellaneous changes
------------------------

- Added support for more 3rd party basic extenders to petcat.

- Added a c64/c128 cartridge conversion program (cartconv).

- Added binary distribution (package) creation functionality.

- Fixed a bug in the trap emulation with caused programs probing
  devices on the IEC bus to fail.

- Lots of small fixes to the monitor.

Revision 1.17: download - view: text, markup, annotated - select for diffs
Mon Apr 17 07:07:18 2006 UTC (20 years, 7 months ago) by jlam
Branches: MAIN
CVS tags: pkgsrc-2006Q4-base, pkgsrc-2006Q4, pkgsrc-2006Q3-base, pkgsrc-2006Q3, pkgsrc-2006Q2-base, pkgsrc-2006Q2
Diff to: previous 1.16: preferred, colored
Changes since revision 1.16: +7 -7 lines
Strip ${PKGLOCALEDIR} from PLISTs of packages that already obey
PKGLOCALEDIR and which install their locale files directly under
${PREFIX}/${PKGLOCALEDIR} and sort the PLIST file entries.  From now
on, pkgsrc/mk/plist/plist-locale.awk will automatically handle
transforming the PLIST to refer to the correct locale directory.

Revision 1.16: download - view: text, markup, annotated - select for diffs
Fri Mar 31 16:47:44 2006 UTC (20 years, 7 months ago) by jlam
Branches: MAIN
Diff to: previous 1.15: preferred, colored
Changes since revision 1.15: +20 -20 lines
* Welcome to the brave new world of gettext-0.14.5 -- if a source file
  includes <libintl.h>, then we must ensure that the resulting object
  is linked against -lintl.  This ensures that the correct *printf()
  functions are used across all platforms.

* List the info files directly in the PLIST.

* Leave the HTML documentation where it is originally installed so that
  it references image files correctly.

Bump the PKGREVISION to 3.

Revision 1.15: download - view: text, markup, annotated - select for diffs
Fri Feb 17 19:26:20 2006 UTC (20 years, 9 months ago) by wiz
Branches: MAIN
CVS tags: pkgsrc-2006Q1-base, pkgsrc-2006Q1
Diff to: previous 1.14: preferred, colored
Changes since revision 1.14: +3 -4 lines
Fix font handling. Move options handling to options.mk.
Fix pkglint warning. Bump PKGREVISION.

Revision 1.14: download - view: text, markup, annotated - select for diffs
Sun Dec 11 22:46:50 2005 UTC (20 years, 11 months ago) by dillo
Branches: MAIN
CVS tags: pkgsrc-2005Q4-base, pkgsrc-2005Q4
Diff to: previous 1.13: preferred, colored
Changes since revision 1.13: +3 -0 lines
Improve sun sound driver on NetBSD to support stereo and not to
rely on counting of played samples, which can get out of sync.
This may work on other platforms too, but I cannot test it.

Update to 1.18:

- Fixed a bug that caused the emulator to crash after 72 minutes.
- Added internal zlib and lpng support if no native libraries are
  found at compile time.
- Fixed video recording frame rate in NTSC mode.
- [C64] Added Structured Basic, Comal 80 and Ross cart support.
- [C64] Fixed the improper detaching of certain types of carts.
- [C64] The +60K expansion base address is now selectable for
  compatibility with the oldest version of the expansion.
- [C128] Improved the VDC emulation.

- Added support for more 3rd party basic extenders to petcat.
- Compiling for QNX 6.x works now (binary package is available).
- [C64] Binary packages for Solaris machines are available.
- [C64] Added full GeoRAM memory expansion support with sizes from 64KB to
  4MB.
- [C64] Added full RamCart memory expansion support.
- [C64] Added full +60K memory expansion support.
- [C64] Correct REU values after reset.
- [C128] Added full GeoRAM memory expansion support with sizes from 64KB to
  4MB.
- [C128] Added RamCart memory expansion support without the read-only option.
- [C128] Fixed some C64 mode bugs.
- [C128] Correct REU values after reset.
- New dutch translation.
- Language support has been extended to include commandline-options.
- BSD platform problems with using the sounduss and soundsun driver
  have been fixed.
- Problems compiling with older versions of libpng have been fixed.
- Problems with MAXPATHLEN and PATH_MAX when compiling have been
  fixed.
- New ALSA sound driver.
- Fixed some compile errors if GCC4 is used.
- Added support for more analog joysticks.
- Userport RS232 emulation should work as expected now.

Revision 1.13: download - view: text, markup, annotated - select for diffs
Sun Feb 6 23:10:09 2005 UTC (21 years, 9 months ago) by kristerw
Branches: MAIN
CVS tags: pkgsrc-2005Q3-base, pkgsrc-2005Q3, pkgsrc-2005Q2-base, pkgsrc-2005Q2, pkgsrc-2005Q1-base, pkgsrc-2005Q1
Diff to: previous 1.12: preferred, colored
Changes since revision 1.12: +7 -6 lines
Update VICE to 1.16.

Changes since 1.15:
** General
- Improved accuracy of 65xx processor core emulation.

** Drive changes
- Added support for idle traps to 1551 emulation.

** C64 changes
- Fixed crash using REU emulation.
- A timing problem has been fixed using old NTSC mode.
- Some stupid char ROM display bug has been fixed.

** C128 changes
- Fixed crash using REU emulation or CP/M mode.

** PLUS4 changes
- Added proper TAP support.

** Unix Changes
- Hardware scaling can be switched at runtime now.
- Fixed crash on machines with weird vidmode configurations.
- Fixed random crash if settings are saved.

** Miscellaneous changes
- Fixed some crash in the file system emulation.
- Improved datasette motor emulation.

Revision 1.12: download - view: text, markup, annotated - select for diffs
Tue Aug 31 15:53:09 2004 UTC (22 years, 2 months ago) by dillo
Branches: MAIN
CVS tags: pkgsrc-2004Q4-base, pkgsrc-2004Q4, pkgsrc-2004Q3-base, pkgsrc-2004Q3
Diff to: previous 1.11: preferred, colored
Changes since revision 1.11: +2 -1 lines
update to 1.15:

** General
- Improved event recording and playback.

** C64 changes
- Fixed some CPU opcodes.
- Added support for Magic Formel cart (preliminary).
- Improved TFE cart emulation.
- Fixed Final Cartridge III freeze bug.

** VIC20 changes
- Four true drives are supported now.
- The sound code has been rewritten.

** PLUS4 changes
- Added cartridge support.

** VIC-II
- Improved IRQ timing during DMA.

** Unix Changes
- Improved ROM set support.
- Added TFE and IDE64 cart support.
- Fixed crash on 64bit archs.
- Added BSD USB joystick support.
- Complete rework of french translation. Credits to Paul (alias Kaddict)!

** Miscellaneous changes
- Made fsdevice emulation to list non-PRG files again.
- Improved REL file handling of the virtual drive emulation.
- Fixed some bugs in the petcat tokenizer.

Revision 1.11: download - view: text, markup, annotated - select for diffs
Fri Jul 16 22:59:11 2004 UTC (22 years, 4 months ago) by kristerw
Branches: MAIN
Diff to: previous 1.10: preferred, colored
Changes since revision 1.10: +1 -2 lines
Do not install cbm-directory-charset.fon -- it is needed
for win32 only, and it makes the mkfontscale in NetBSD 2.0
dump core (PR xsrc/25587).

Bump PKGREVISION.

Revision 1.10: download - view: text, markup, annotated - select for diffs
Sat Jan 31 00:51:39 2004 UTC (22 years, 9 months ago) by kristerw
Branches: MAIN
CVS tags: pkgsrc-2004Q2-base, pkgsrc-2004Q2, pkgsrc-2004Q1-base, pkgsrc-2004Q1
Diff to: previous 1.9: preferred, colored
Changes since revision 1.9: +11 -8 lines
Update vice to 1.14.

Changes from VICE 1.13 include:

** General
- Added IEC devices which allow to access printer or file system
  devices even if true drive emulation is enabled.

** VIC-II
- Fixed some severe sprite collision detection bugs.

** Drive changes
- Increased the number of true drives to four.
- Support for 1570 and 1571CR drives has been added (1571CR is not
  fully implemented though).
- 1581 emulation is much more accurate now.

** Printer changes
- Added Star NL10 printer emulation.

Revision 1.8.2.1: download - view: text, markup, annotated - select for diffs
Sun Dec 7 12:24:55 2003 UTC (22 years, 11 months ago) by agc
Branches: pkgsrc-2003Q4
Diff to: previous 1.8: preferred, colored; next MAIN 1.9: preferred, colored
Changes since revision 1.8: +1 -8 lines
Pullup to the pkgsrc-2003Q4 branch a change necessitated by master-site
distfile changes, requested by Krister Walfridsson.

	Module Name:    pkgsrc
	Committed By:   kristerw
	Date:           Thu Dec  4 00:42:04 UTC 2003

	Modified Files:
		pkgsrc/emulators/vice: Makefile PLIST distinfo
	Removed Files:
		pkgsrc/emulators/vice/patches: patch-ad

	Log Message:
	The 4064, SX-64, and C64 Game System dist files have been removed
	from the FTP.  Remove them from the package too.

	PKGREVISION++

Revision 1.9: download - view: text, markup, annotated - select for diffs
Thu Dec 4 00:42:04 2003 UTC (22 years, 11 months ago) by kristerw
Branches: MAIN
Diff to: previous 1.8: preferred, colored
Changes since revision 1.8: +1 -8 lines
The 4064, SX-64, and C64 Game System dist files have been removed
from the FTP.  Remove them from the package too.

PKGREVISION++

Revision 1.8: download - view: text, markup, annotated - select for diffs
Sun Sep 28 10:41:21 2003 UTC (23 years, 1 month ago) by kristerw
Branches: MAIN
CVS tags: pkgsrc-2003Q4-base
Branch point for: pkgsrc-2003Q4
Diff to: previous 1.7: preferred, colored
Changes since revision 1.7: +7 -4 lines
Update vice to 1.13.

Changes since 1.12 include:
** General
- Added new Scale2x render.
- Fixed NMI line emulation bug.

** C64 changes
- Better processor port initialization (some carts depend on this)
- Fixed a bug reading old snapshot files.
- Added SS5 CRT support and fixed the SS5 screen distortion bug.

** C128 changes
- Fixed some fast IEC bus related drive bugs
- Added some opcodes to the Z80 emulation.

** PLUS4 changes
- Many TED fixes.
- User port parallel cable.

** VIC-II
- The character ROM is now displayed in bitmap mode.
- Fixed some minor DMA timing, ECM mode and sprite bugs.

** SID changes
- New HardSID support.
- Catweasel support should work now.

** Unix changes
- ACIA emulation has been fixed.

Revision 1.7: download - view: text, markup, annotated - select for diffs
Mon Jun 30 12:06:09 2003 UTC (23 years, 4 months ago) by seb
Branches: MAIN
Diff to: previous 1.6: preferred, colored
Changes since revision 1.6: +1 -3 lines
Convert to USE_NEW_TEXINFO.

Revision 1.6: download - view: text, markup, annotated - select for diffs
Mon Jun 23 19:05:09 2003 UTC (23 years, 4 months ago) by kristerw
Branches: MAIN
Diff to: previous 1.5: preferred, colored
Changes since revision 1.5: +27 -9 lines
Update vice to 1.12.

Changes since 1.11 include:
** General changes
- Added -autoload switch which acts like -autostart but without
  actually starting the program.
- It is possible to use the printer emulation without switching off
  true drive emulation now.

** C64 changes
- Mouse emulation should work again.
- Improved trap emulation compatibility.

** C128 changes
- Fixed some VDC crashs.
- Added support for national firmware and keyboard mappings.
- Implemented fast IEC bus.

** PLUS4 changes
- New emulator.  Currently it contains many bugs and several features
  are missing.  Do not send any bug reports for now.

** VIC-II
- Fixed some raster interrupt emulation bugs.
- Some minor NTSC fixes.
- Reset should properly reset the VIC-II now.

** SID changes
- The ReSID state is saved in snapshots now.

** Drive changes
- Improved GCR sync detection.
- Added some more jobcodes to the 1581 emulation.
- RAM mirrors are properly emulated now.

Revision 1.5: download - view: text, markup, annotated - select for diffs
Sat Sep 7 09:17:11 2002 UTC (24 years, 2 months ago) by kristerw
Branches: MAIN
CVS tags: netbsd-1-6-1-base, netbsd-1-6-1
Diff to: previous 1.4: preferred, colored
Changes since revision 1.4: +49 -15 lines
Update emulators/vice to version 1.10.

Changes since vice-1.9 include:
** General
- The keyboard handling has been reworked. In most ports the keys can
  be assigned by *.vkm files.
- Fixed display bugs during warp mode.
- The autostart function prepares the drive with last accessed track,
  sector and buffer data now.
- The opcode fetch of the 65xx CPU emulation is more accurate now.

** C64 changes
- A processor port bug has been fixed, so IWM Diamonds works again.
- Fixed a bug in the Retro Replay emulation.
- Added support for IDE64 interface emulation.

** C128 changes
- Added DIN charset support.
- Added support for second color bank.

** VIC20 changes
- Access to unconnected address space has been fixed.

** VIC-II
- $d016 xsmooth emulation is cycle exact now!
- Many small bugs in the VIC-II emulation have been fixed.
- Accessing unconnected address space returns last phi1 data read by
  the VIC-II now.
- Fixed bug loading a snapshot image with sprites enabled.

** Drive changes
- Implemented firmware ROM mirrors.

** Tape changes
- The image content lister lists the contents of TAP images too.

Revision 1.4: download - view: text, markup, annotated - select for diffs
Thu Aug 8 11:59:36 2002 UTC (24 years, 3 months ago) by wiz
Branches: MAIN
CVS tags: netbsd-1-6-RELEASE-base, netbsd-1-6
Diff to: previous 1.3: preferred, colored
Changes since revision 1.3: +2 -11 lines
Bump to 1.9nb1: Do not install resid header files. Closes pkg/17880.
Also add xplus4 to PLIST.

Revision 1.3: download - view: text, markup, annotated - select for diffs
Mon Apr 22 21:02:10 2002 UTC (24 years, 7 months ago) by kristerw
Branches: MAIN
CVS tags: pkgviews-base, pkgviews, buildlink2-base, buildlink2
Diff to: previous 1.2: preferred, colored
Changes since revision 1.2: +20 -8 lines
Update vice to version 1.9.

Changes since vice-1.7 include:
** C64 changes
- The REU is emulated cycle exact now.
- Added support for Retro Replay cartridge.
- Fixed a CIA timer emulation bug.
- Frankie goes to Hollywood may work now.

** C128 changes
- VDC has been improved a lot (but not ready for RFO now).
- Fixed a stupid bug in the Z80 emulation.
- Fixed $ff01-$ff04 MMU register access.
- Added support for C64 type cartridges.

** VIC-II
- Fast PAL emulation has been added.
- Added VIC-II reengineered palette.
- Added also command line switches for:
  brightness, contrast, saturation, gamma
- New style luminance signals
- Using internal/external palette
- Various fixes to make more demos work.

** Drive changes
- True drive emulation is default now.
- A reset during autostart restores true drive emulation if enabled
  before.
- Relaxed disk change timing a bit and fixed the sync bit.  More
  programs will recognise the disk change now.
- Odd sized d64 images are supported now.

** General
- Real PAL filter emulation.

Revision 1.2: download - view: text, markup, annotated - select for diffs
Mon Feb 18 15:14:18 2002 UTC (24 years, 9 months ago) by seb
Branches: MAIN
CVS tags: netbsd-1-5-PATCH003
Diff to: previous 1.1: preferred, colored
Changes since revision 1.1: +3 -3 lines
Introduce new framework for handling info files generation and installation.

Summary of changes:
- removal of USE_GTEXINFO
- addition of mk/texinfo.mk
- inclusion of this file in package Makefiles requiring it
- `install-info' substituted by `${INSTALL_INFO}' in PLISTs
- tuning of mk/bsd.pkg.mk:
    removal of USE_GTEXINFO
    INSTALL_INFO added to PLIST_SUBST
    `${INSTALL_INFO}' replace `install-info' in target rules
    print-PLIST target now generate `${INSTALL_INFO}' instead of `install-info'
- a couple of new patch files added for a handful of packages
- setting of the TEXINFO_OVERRIDE "switch" in packages Makefiles requiring it
- devel/cssc marked requiring texinfo 4.0
- a couple of packages Makefiles were tuned with respect of INFO_FILES and
  makeinfo command usage

See -newly added by this commit- section 10.24 of Packages.txt for
further information.

Revision 1.1: download - view: text, markup, annotated - select for diffs
Wed Oct 31 23:54:04 2001 UTC (25 years ago) by zuntum
Branches: MAIN
Move pkg/ files into package's toplevel directory

Diff request

This form allows you to request diffs between any two revisions of a file. You may select a symbolic revision name using the selection box or you may type in a numeric name using the type-in text box.

Log view options

CVSweb <webmaster@jp.NetBSD.org>