Annotation of htdocs/docs/pkgsrc/pkgsrc.txt, revision 1.75
1.1 dsieger 1: The pkgsrc guide
2:
3: Documentation on the NetBSD packages system
4:
5: Alistair Crooks
6:
7: <agc@NetBSD.org>
8:
9: Hubert Feyrer
10:
11: <hubertf@NetBSD.org>
12:
13: The pkgsrc Developers
14:
1.4 rillig 15: Copyright 1994-2007 The NetBSD Foundation, Inc
1.1 dsieger 16:
1.6 rillig 17: $NetBSD: pkgsrc.xml,v 1.26 2007/09/18 08:17:21 rillig Exp $
1.1 dsieger 18:
19: Abstract
20:
21: pkgsrc is a centralized package management system for Unix-like operating
22: systems. This guide provides information for users and developers of pkgsrc. It
23: covers installation of binary and source packages, creation of binary and
24: source packages and a high-level overview about the infrastructure.
25:
26: -------------------------------------------------------------------------------
27:
28: Table of Contents
29:
30: 1. What is pkgsrc?
31:
32: 1.1. Introduction
33:
34: 1.1.1. Why pkgsrc?
35: 1.1.2. Supported platforms
36:
37: 1.2. Overview
38: 1.3. Terminology
39:
40: 1.3.1. Roles involved in pkgsrc
41:
42: 1.4. Typography
43:
44: I. The pkgsrc user's guide
45:
46: 2. Where to get pkgsrc and how to keep it up-to-date
47:
48: 2.1. Getting pkgsrc for the first time
49:
1.52 asau 50: 2.1.1. As tar archive
1.24 wiz 51: 2.1.2. Via anonymous CVS
1.1 dsieger 52:
53: 2.2. Keeping pkgsrc up-to-date
54:
55: 2.2.1. Via tar files
56: 2.2.2. Via CVS
57:
58: 3. Using pkgsrc on systems other than NetBSD
59:
60: 3.1. Binary distribution
61: 3.2. Bootstrapping pkgsrc
62: 3.3. Platform-specific notes
63:
1.46 obache 64: 3.3.1. Cygwin
65: 3.3.2. Darwin (Mac OS X)
66: 3.3.3. FreeBSD
1.58 ryoon 67: 3.3.4. GNU/kFreeBSD
68: 3.3.5. Interix
69: 3.3.6. IRIX
70: 3.3.7. Linux
71: 3.3.8. MirBSD
72: 3.3.9. OpenBSD
73: 3.3.10. Solaris
1.1 dsieger 74:
75: 4. Using pkgsrc
76:
77: 4.1. Using binary packages
78:
79: 4.1.1. Finding binary packages
80: 4.1.2. Installing binary packages
81: 4.1.3. Deinstalling packages
82: 4.1.4. Getting information about installed packages
83: 4.1.5. Checking for security vulnerabilities in installed packages
84: 4.1.6. Finding if newer versions of your installed packages are in
85: pkgsrc
86: 4.1.7. Other administrative functions
87: 4.1.8. A word of warning
88:
89: 4.2. Building packages from source
90:
91: 4.2.1. Requirements
92: 4.2.2. Fetching distfiles
93: 4.2.3. How to build and install
94:
95: 5. Configuring pkgsrc
96:
97: 5.1. General configuration
98: 5.2. Variables affecting the build process
1.9 rillig 99: 5.3. Variables affecting the installation process
1.4 rillig 100: 5.4. Selecting and configuring the compiler
1.1 dsieger 101:
1.4 rillig 102: 5.4.1. Selecting the compiler
103: 5.4.2. Additional flags to the compiler (CFLAGS)
104: 5.4.3. Additional flags to the linker (LDFLAGS)
1.1 dsieger 105:
1.4 rillig 106: 5.5. Developer/advanced settings
107: 5.6. Selecting Build Options
1.1 dsieger 108:
109: 6. Creating binary packages
110:
111: 6.1. Building a single binary package
112: 6.2. Settings for creation of binary packages
113:
1.6 rillig 114: 7. Creating binary packages for everything in pkgsrc (bulk builds)
115:
1.71 wiz 116: 7.1. Preparations
117: 7.2. Running a pbulk-style bulk build
1.6 rillig 118:
1.71 wiz 119: 7.2.1. Configuration
1.6 rillig 120:
1.71 wiz 121: 7.3. Requirements of a full bulk build
1.66 asau 122: 7.4. Creating a multiple CD-ROM packages collection
1.6 rillig 123:
1.66 asau 124: 7.4.1. Example of cdpack
1.6 rillig 125:
126: 8. Directory layout of the installed files
127:
128: 8.1. File system layout in ${LOCALBASE}
129: 8.2. File system layout in ${VARBASE}
130:
131: 9. Frequently Asked Questions
132:
133: 9.1. Are there any mailing lists for pkg-related discussion?
134: 9.2. Where's the pkgviews documentation?
135: 9.3. Utilities for package management (pkgtools)
136: 9.4. How to use pkgsrc as non-root
137: 9.5. How to resume transfers when fetching distfiles?
138: 9.6. How can I install/use modular X.org from pkgsrc?
139: 9.7. How to fetch files from behind a firewall
1.65 wiz 140: 9.8. How to fetch files from HTTPS sites
141: 9.9. How do I tell make fetch to do passive FTP?
142: 9.10. How to fetch all distfiles at once
143: 9.11. What does "Don't know how to make /usr/share/tmac/tmac.andoc"
1.24 wiz 144: mean?
1.65 wiz 145: 9.12. What does "Could not find bsd.own.mk" mean?
146: 9.13. Using 'sudo' with pkgsrc
147: 9.14. How do I change the location of configuration files?
148: 9.15. Automated security checks
149: 9.16. Why do some packages ignore my CFLAGS?
150: 9.17. A package does not build. What shall I do?
151: 9.18. What does "Makefile appears to contain unresolved cvs/rcs/???
1.24 wiz 152: merge conflicts" mean?
1.1 dsieger 153:
154: II. The pkgsrc developer's guide
155:
1.6 rillig 156: 10. Creating a new pkgsrc package from scratch
1.1 dsieger 157:
1.6 rillig 158: 10.1. Common types of packages
1.1 dsieger 159:
1.6 rillig 160: 10.1.1. Perl modules
1.66 asau 161: 10.1.2. KDE3 applications
1.17 imil 162: 10.1.3. Python modules and programs
1.1 dsieger 163:
1.6 rillig 164: 10.2. Examples
1.1 dsieger 165:
1.6 rillig 166: 10.2.1. How the www/nvu package came into pkgsrc
1.1 dsieger 167:
1.6 rillig 168: 11. Package components - files, directories and contents
1.1 dsieger 169:
1.6 rillig 170: 11.1. Makefile
171: 11.2. distinfo
172: 11.3. patches/*
1.1 dsieger 173:
1.6 rillig 174: 11.3.1. Structure of a single patch file
175: 11.3.2. Creating patch files
176: 11.3.3. Sources where the patch files come from
177: 11.3.4. Patching guidelines
178: 11.3.5. Feedback to the author
1.1 dsieger 179:
1.6 rillig 180: 11.4. Other mandatory files
181: 11.5. Optional files
1.1 dsieger 182:
1.6 rillig 183: 11.5.1. Files affecting the binary package
184: 11.5.2. Files affecting the build process
185: 11.5.3. Files affecting nothing at all
1.1 dsieger 186:
1.6 rillig 187: 11.6. work*
188: 11.7. files/*
1.1 dsieger 189:
1.6 rillig 190: 12. Programming in Makefiles
1.1 dsieger 191:
1.6 rillig 192: 12.1. Caveats
193: 12.2. Makefile variables
1.1 dsieger 194:
1.6 rillig 195: 12.2.1. Naming conventions
1.1 dsieger 196:
1.6 rillig 197: 12.3. Code snippets
1.1 dsieger 198:
1.6 rillig 199: 12.3.1. Adding things to a list
200: 12.3.2. Converting an internal list into an external list
201: 12.3.3. Passing variables to a shell command
202: 12.3.4. Quoting guideline
203: 12.3.5. Workaround for a bug in BSD Make
1.1 dsieger 204:
1.6 rillig 205: 13. PLIST issues
1.1 dsieger 206:
1.6 rillig 207: 13.1. RCS ID
208: 13.2. Semi-automatic PLIST generation
209: 13.3. Tweaking output of make print-PLIST
210: 13.4. Variable substitution in PLIST
211: 13.5. Man page compression
212: 13.6. Changing PLIST source with PLIST_SRC
213: 13.7. Platform-specific and differing PLISTs
214: 13.8. Sharing directories between packages
1.1 dsieger 215:
1.6 rillig 216: 14. Buildlink methodology
1.1 dsieger 217:
1.6 rillig 218: 14.1. Converting packages to use buildlink3
219: 14.2. Writing buildlink3.mk files
1.1 dsieger 220:
1.6 rillig 221: 14.2.1. Anatomy of a buildlink3.mk file
1.27 wiz 222: 14.2.2. Updating BUILDLINK_API_DEPENDS.pkg and
223: BUILDLINK_ABI_DEPENDS.pkg in buildlink3.mk files
1.1 dsieger 224:
1.6 rillig 225: 14.3. Writing builtin.mk files
1.1 dsieger 226:
1.6 rillig 227: 14.3.1. Anatomy of a builtin.mk file
228: 14.3.2. Global preferences for native or pkgsrc software
1.1 dsieger 229:
1.6 rillig 230: 15. The pkginstall framework
1.1 dsieger 231:
1.6 rillig 232: 15.1. Files and directories outside the installation prefix
1.1 dsieger 233:
1.6 rillig 234: 15.1.1. Directory manipulation
235: 15.1.2. File manipulation
1.1 dsieger 236:
1.6 rillig 237: 15.2. Configuration files
1.1 dsieger 238:
1.6 rillig 239: 15.2.1. How PKG_SYSCONFDIR is set
240: 15.2.2. Telling the software where configuration files are
241: 15.2.3. Patching installations
242: 15.2.4. Disabling handling of configuration files
1.1 dsieger 243:
1.6 rillig 244: 15.3. System startup scripts
1.1 dsieger 245:
1.6 rillig 246: 15.3.1. Disabling handling of system startup scripts
1.1 dsieger 247:
1.6 rillig 248: 15.4. System users and groups
249: 15.5. System shells
1.1 dsieger 250:
1.6 rillig 251: 15.5.1. Disabling shell registration
1.1 dsieger 252:
1.6 rillig 253: 15.6. Fonts
1.1 dsieger 254:
1.6 rillig 255: 15.6.1. Disabling automatic update of the fonts databases
1.1 dsieger 256:
1.6 rillig 257: 16. Options handling
1.1 dsieger 258:
1.6 rillig 259: 16.1. Global default options
260: 16.2. Converting packages to use bsd.options.mk
261: 16.3. Option Names
1.7 rillig 262: 16.4. Determining the options of dependencies
1.1 dsieger 263:
1.6 rillig 264: 17. The build process
1.1 dsieger 265:
1.6 rillig 266: 17.1. Introduction
267: 17.2. Program location
268: 17.3. Directories used during the build process
269: 17.4. Running a phase
270: 17.5. The fetch phase
1.1 dsieger 271:
1.6 rillig 272: 17.5.1. What to fetch and where to get it from
273: 17.5.2. How are the files fetched?
1.1 dsieger 274:
1.6 rillig 275: 17.6. The checksum phase
276: 17.7. The extract phase
277: 17.8. The patch phase
278: 17.9. The tools phase
279: 17.10. The wrapper phase
280: 17.11. The configure phase
281: 17.12. The build phase
282: 17.13. The test phase
283: 17.14. The install phase
284: 17.15. The package phase
285: 17.16. Cleaning up
286: 17.17. Other helpful targets
1.1 dsieger 287:
1.6 rillig 288: 18. Tools needed for building or running
1.1 dsieger 289:
1.6 rillig 290: 18.1. Tools for pkgsrc builds
291: 18.2. Tools needed by packages
292: 18.3. Tools provided by platforms
293: 18.4. Questions regarding the tools
1.1 dsieger 294:
1.6 rillig 295: 19. Making your package work
1.1 dsieger 296:
1.6 rillig 297: 19.1. General operation
1.1 dsieger 298:
1.6 rillig 299: 19.1.1. Portability of packages
1.24 wiz 300: 19.1.2. How to pull in user-settable variables from mk.conf
1.6 rillig 301: 19.1.3. User interaction
302: 19.1.4. Handling licenses
303: 19.1.5. Restricted packages
304: 19.1.6. Handling dependencies
305: 19.1.7. Handling conflicts with other packages
306: 19.1.8. Packages that cannot or should not be built
307: 19.1.9. Packages which should not be deleted, once installed
308: 19.1.10. Handling packages with security problems
309: 19.1.11. How to handle incrementing versions when fixing an
1.1 dsieger 310: existing package
1.6 rillig 311: 19.1.12. Substituting variable text in the package files (the SUBST
1.1 dsieger 312: framework)
313:
1.6 rillig 314: 19.2. Fixing problems in the fetch phase
1.1 dsieger 315:
1.6 rillig 316: 19.2.1. Packages whose distfiles aren't available for plain
1.1 dsieger 317: downloading
1.6 rillig 318: 19.2.2. How to handle modified distfiles with the 'old' name
1.1 dsieger 319:
1.6 rillig 320: 19.3. Fixing problems in the configure phase
1.1 dsieger 321:
1.6 rillig 322: 19.3.1. Shared libraries - libtool
323: 19.3.2. Using libtool on GNU packages that already support libtool
324: 19.3.3. GNU Autoconf/Automake
325:
326: 19.4. Programming languages
327:
328: 19.4.1. C, C++, and Fortran
329: 19.4.2. Java
330: 19.4.3. Packages containing perl scripts
1.41 wiz 331: 19.4.4. Packages containing shell scripts
332: 19.4.5. Other programming languages
1.6 rillig 333:
334: 19.5. Fixing problems in the build phase
335:
336: 19.5.1. Compiling C and C++ code conditionally
337: 19.5.2. How to handle compiler bugs
1.24 wiz 338: 19.5.3. Undefined reference to "..."
1.6 rillig 339: 19.5.4. Running out of memory
340:
341: 19.6. Fixing problems in the install phase
342:
343: 19.6.1. Creating needed directories
344: 19.6.2. Where to install documentation
345: 19.6.3. Installing highscore files
346: 19.6.4. Adding DESTDIR support to packages
347: 19.6.5. Packages with hardcoded paths to other interpreters
348: 19.6.6. Packages installing perl modules
349: 19.6.7. Packages installing info files
350: 19.6.8. Packages installing man pages
1.7 rillig 351: 19.6.9. Packages installing GConf data files
1.18 mishka 352: 19.6.10. Packages installing scrollkeeper/rarian data files
1.6 rillig 353: 19.6.11. Packages installing X11 fonts
354: 19.6.12. Packages installing GTK2 modules
355: 19.6.13. Packages installing SGML or XML data
356: 19.6.14. Packages installing extensions to the MIME database
357: 19.6.15. Packages using intltool
358: 19.6.16. Packages installing startup scripts
359: 19.6.17. Packages installing TeX modules
360: 19.6.18. Packages supporting running binaries in emulation
361: 19.6.19. Packages installing hicolor theme icons
362: 19.6.20. Packages installing desktop files
363:
364: 19.7. Marking packages as having problems
365:
366: 20. Debugging
367: 21. Submitting and Committing
368:
369: 21.1. Submitting binary packages
370: 21.2. Submitting source packages (for non-NetBSD-developers)
371: 21.3. General notes when adding, updating, or removing packages
1.34 wiz 372: 21.4. Committing: Adding a package to CVS
1.6 rillig 373: 21.5. Updating a package to a newer version
1.21 snj 374: 21.6. Renaming a package in pkgsrc
375: 21.7. Moving a package in pkgsrc
1.6 rillig 376:
377: 22. Frequently Asked Questions
378: 23. GNOME packaging and porting
379:
380: 23.1. Meta packages
381: 23.2. Packaging a GNOME application
382: 23.3. Updating GNOME to a newer version
383: 23.4. Patching guidelines
1.1 dsieger 384:
385: III. The pkgsrc infrastructure internals
386:
1.6 rillig 387: 24. Design of the pkgsrc infrastructure
1.1 dsieger 388:
1.6 rillig 389: 24.1. The meaning of variable definitions
390: 24.2. Avoiding problems before they arise
391: 24.3. Variable evaluation
1.1 dsieger 392:
1.6 rillig 393: 24.3.1. At load time
394: 24.3.2. At runtime
1.1 dsieger 395:
1.6 rillig 396: 24.4. How can variables be specified?
397: 24.5. Designing interfaces for Makefile fragments
1.1 dsieger 398:
1.6 rillig 399: 24.5.1. Procedures with parameters
400: 24.5.2. Actions taken on behalf of parameters
1.1 dsieger 401:
1.6 rillig 402: 24.6. The order in which files are loaded
1.1 dsieger 403:
1.6 rillig 404: 24.6.1. The order in bsd.prefs.mk
405: 24.6.2. The order in bsd.pkg.mk
1.1 dsieger 406:
1.6 rillig 407: 25. Regression tests
1.1 dsieger 408:
1.6 rillig 409: 25.1. The regression tests framework
410: 25.2. Running the regression tests
411: 25.3. Adding a new regression test
1.1 dsieger 412:
1.6 rillig 413: 25.3.1. Overridable functions
414: 25.3.2. Helper functions
1.1 dsieger 415:
1.6 rillig 416: 26. Porting pkgsrc
1.1 dsieger 417:
1.6 rillig 418: 26.1. Porting pkgsrc to a new operating system
419: 26.2. Adding support for a new compiler
1.1 dsieger 420:
421: A. A simple example package: bison
422:
423: A.1. files
424:
425: A.1.1. Makefile
426: A.1.2. DESCR
427: A.1.3. PLIST
428: A.1.4. Checking a package with pkglint
429:
430: A.2. Steps for building, installing, packaging
431:
432: B. Build logs
433:
434: B.1. Building figlet
435: B.2. Packaging figlet
436:
437: C. Directory layout of the pkgsrc FTP server
438:
1.23 jakllsch 439: C.1. distfiles: The distributed source files
440: C.2. misc: Miscellaneous things
441: C.3. packages: Binary packages
442: C.4. reports: Bulk build reports
443: C.5. current, pkgsrc-20xxQy: source packages
1.1 dsieger 444:
445: D. Editing guidelines for the pkgsrc guide
446:
447: D.1. Make targets
448: D.2. Procedure
449:
450: List of Tables
451:
452: 1.1. Platforms supported by pkgsrc
1.6 rillig 453: 11.1. Patching examples
454: 23.1. PLIST handling for GNOME packages
1.1 dsieger 455:
456: Chapter 1. What is pkgsrc?
457:
458: Table of Contents
459:
460: 1.1. Introduction
461:
462: 1.1.1. Why pkgsrc?
463: 1.1.2. Supported platforms
464:
465: 1.2. Overview
466: 1.3. Terminology
467:
468: 1.3.1. Roles involved in pkgsrc
469:
470: 1.4. Typography
471:
472: 1.1. Introduction
473:
474: There is a lot of software freely available for Unix-based systems, which is
475: usually available in form of the source code. Before such software can be used,
476: it needs to be configured to the local system, compiled and installed, and this
477: is exactly what The NetBSD Packages Collection (pkgsrc) does. pkgsrc also has
478: some basic commands to handle binary packages, so that not every user has to
479: build the packages for himself, which is a time-costly task.
480:
481: pkgsrc currently contains several thousand packages, including:
482:
483: * www/apache - The Apache web server
484:
485: * www/firefox - The Firefox web browser
486:
487: * meta-pkgs/gnome - The GNOME Desktop Environment
488:
489: * meta-pkgs/kde3 - The K Desktop Environment
490:
491: ...just to name a few.
492:
493: pkgsrc has built-in support for handling varying dependencies, such as pthreads
494: and X11, and extended features such as IPv6 support on a range of platforms.
495:
496: 1.1.1. Why pkgsrc?
497:
498: pkgsrc provides the following key features:
499:
500: * Easy building of software from source as well as the creation and
501: installation of binary packages. The source and latest patches are
502: retrieved from a master or mirror download site, checksum verified, then
503: built on your system. Support for binary-only distributions is available
504: for both native platforms and NetBSD emulated platforms.
505:
506: * All packages are installed in a consistent directory tree, including
507: binaries, libraries, man pages and other documentation.
508:
509: * Package dependencies, including when performing package updates, are
510: handled automatically. The configuration files of various packages are
511: handled automatically during updates, so local changes are preserved.
512:
513: * Like NetBSD, pkgsrc is designed with portability in mind and consists of
514: highly portable code. This allows the greatest speed of development when
1.26 spz 515: porting to a new platform. This portability also ensures that pkgsrc is
1.1 dsieger 516: consistent across all platforms.
517:
518: * The installation prefix, acceptable software licenses, international
519: encryption requirements and build-time options for a large number of
520: packages are all set in a simple, central configuration file.
521:
522: * The entire source (not including the distribution files) is freely
523: available under a BSD license, so you may extend and adapt pkgsrc to your
524: needs. Support for local packages and patches is available right out of the
525: box, so you can configure it specifically for your environment.
526:
527: The following principles are basic to pkgsrc:
528:
529: * "It should only work if it's right." ? That means, if a package contains
530: bugs, it's better to find them and to complain about them rather than to
531: just install the package and hope that it works. There are numerous checks
532: in pkgsrc that try to find such bugs: Static analysis tools (pkgtools/
533: pkglint), build-time checks (portability of shell scripts), and
534: post-installation checks (installed files, references to shared libraries,
535: script interpreters).
536:
537: * "If it works, it should work everywhere" ? Like NetBSD has been ported to
538: many hardware architectures, pkgsrc has been ported to many operating
539: systems. Care is taken that packages behave the same on all platforms.
540:
541: 1.1.2. Supported platforms
542:
543: pkgsrc consists of both a source distribution and a binary distribution for
544: these operating systems. After retrieving the required source or binaries, you
545: can be up and running with pkgsrc in just minutes!
546:
547: pkgsrc was derived from FreeBSD's ports system, and initially developed for
548: NetBSD only. Since then, pkgsrc has grown a lot, and now supports the following
549: platforms:
550:
551: Table 1.1. Platforms supported by pkgsrc
552:
553: +----------------------------------------------------------------+
554: | Platform |Date Support Added|
555: |---------------------------------------------+------------------|
556: |NetBSD | Aug 1997 |
557: |---------------------------------------------+------------------|
558: |Solaris | Mar 1999 |
559: |---------------------------------------------+------------------|
560: |Linux | Jun 1999 |
561: |---------------------------------------------+------------------|
562: |Darwin (Mac OS X) | Oct 2001 |
563: |---------------------------------------------+------------------|
564: |FreeBSD | Nov 2002 |
565: |---------------------------------------------+------------------|
566: |OpenBSD | Nov 2002 |
567: |---------------------------------------------+------------------|
568: |IRIX | Dec 2002 |
569: |---------------------------------------------+------------------|
570: |BSD/OS | Dec 2003 |
571: |---------------------------------------------+------------------|
572: |AIX | Dec 2003 |
573: |---------------------------------------------+------------------|
574: |Interix (Microsoft Windows Services for Unix)| Mar 2004 |
575: |---------------------------------------------+------------------|
576: |DragonFlyBSD | Oct 2004 |
577: |---------------------------------------------+------------------|
578: |OSF/1 | Nov 2004 |
579: |---------------------------------------------+------------------|
580: |HP-UX | Apr 2007 |
1.24 wiz 581: |---------------------------------------------+------------------|
582: |Haiku | Sep 2010 |
1.46 obache 583: |---------------------------------------------+------------------|
1.58 ryoon 584: |MirBSD | Jan 2011 |
1.46 obache 585: |---------------------------------------------+------------------|
586: |Minix3 | Nov 2011 |
587: |---------------------------------------------+------------------|
588: |Cygwin | Mar 2013 |
1.58 ryoon 589: |---------------------------------------------+------------------|
590: |GNU/kFreeBSD | Jul 2013 |
1.1 dsieger 591: +----------------------------------------------------------------+
592:
593:
594: 1.2. Overview
595:
596: This document is divided into three parts. The first, The pkgsrc user's guide,
597: describes how one can use one of the packages in the Package Collection, either
598: by installing a precompiled binary package, or by building one's own copy using
599: the NetBSD package system. The second part, The pkgsrc developer's guide,
600: explains how to prepare a package so it can be easily built by other NetBSD
601: users without knowing about the package's building details. The third part, The
602: pkgsrc infrastructure internals is intended for those who want to understand
603: how pkgsrc is implemented.
604:
605: This document is available in various formats: HTML, PDF, PS, TXT.
606:
607: 1.3. Terminology
608:
609: There has been a lot of talk about "ports", "packages", etc. so far. Here is a
610: description of all the terminology used within this document.
611:
612: Package
613:
614: A set of files and building instructions that describe what's necessary to
615: build a certain piece of software using pkgsrc. Packages are traditionally
616: stored under /usr/pkgsrc.
617:
618: The NetBSD package system
619:
620: This is the former name of "pkgsrc". It is part of the NetBSD operating
621: system and can be bootstrapped to run on non-NetBSD operating systems as
622: well. It handles building (compiling), installing, and removing of
623: packages.
624:
625: Distfile
626:
627: This term describes the file or files that are provided by the author of
628: the piece of software to distribute his work. All the changes necessary to
629: build on NetBSD are reflected in the corresponding package. Usually the
630: distfile is in the form of a compressed tar-archive, but other types are
631: possible, too. Distfiles are usually stored below /usr/pkgsrc/distfiles.
632:
633: Port
634:
635: This is the term used by FreeBSD and OpenBSD people for what we call a
636: package. In NetBSD terminology, "port" refers to a different architecture.
637:
638: Precompiled/binary package
639:
640: A set of binaries built with pkgsrc from a distfile and stuffed together in
641: a single .tgz file so it can be installed on machines of the same machine
642: architecture without the need to recompile. Packages are usually generated
643: in /usr/pkgsrc/packages; there is also an archive on ftp.NetBSD.org.
644:
645: Sometimes, this is referred to by the term "package" too, especially in the
646: context of precompiled packages.
647:
648: Program
649:
650: The piece of software to be installed which will be constructed from all
651: the files in the distfile by the actions defined in the corresponding
652: package.
653:
654: 1.3.1. Roles involved in pkgsrc
655:
656: pkgsrc users
657:
658: The pkgsrc users are people who use the packages provided by pkgsrc.
659: Typically they are system administrators. The people using the software
660: that is inside the packages (maybe called "end users") are not covered by
661: the pkgsrc guide.
662:
663: There are two kinds of pkgsrc users: Some only want to install pre-built
664: binary packages. Others build the pkgsrc packages from source, either for
665: installing them directly or for building binary packages themselves. For
666: pkgsrc users Part I, "The pkgsrc user's guide" should provide all necessary
667: documentation.
668:
669: package maintainers
670:
671: A package maintainer creates packages as described in Part II, "The pkgsrc
672: developer's guide".
673:
674: infrastructure developers
675:
676: These people are involved in all those files that live in the mk/ directory
677: and below. Only these people should need to read through Part III, "The
678: pkgsrc infrastructure internals", though others might be curious, too.
679:
680: 1.4. Typography
681:
682: When giving examples for commands, shell prompts are used to show if the
683: command should/can be issued as root, or if "normal" user privileges are
684: sufficient. We use a # for root's shell prompt, and a % for users' shell
685: prompt, assuming they use the C-shell or tcsh.
686:
687: Part I. The pkgsrc user's guide
688:
689: Table of Contents
690:
691: 2. Where to get pkgsrc and how to keep it up-to-date
692:
693: 2.1. Getting pkgsrc for the first time
694:
1.52 asau 695: 2.1.1. As tar archive
1.24 wiz 696: 2.1.2. Via anonymous CVS
1.1 dsieger 697:
698: 2.2. Keeping pkgsrc up-to-date
699:
700: 2.2.1. Via tar files
701: 2.2.2. Via CVS
702:
703: 3. Using pkgsrc on systems other than NetBSD
704:
705: 3.1. Binary distribution
706: 3.2. Bootstrapping pkgsrc
707: 3.3. Platform-specific notes
708:
1.46 obache 709: 3.3.1. Cygwin
710: 3.3.2. Darwin (Mac OS X)
711: 3.3.3. FreeBSD
1.58 ryoon 712: 3.3.4. GNU/kFreeBSD
713: 3.3.5. Interix
714: 3.3.6. IRIX
715: 3.3.7. Linux
716: 3.3.8. MirBSD
717: 3.3.9. OpenBSD
718: 3.3.10. Solaris
1.1 dsieger 719:
720: 4. Using pkgsrc
721:
722: 4.1. Using binary packages
723:
724: 4.1.1. Finding binary packages
725: 4.1.2. Installing binary packages
726: 4.1.3. Deinstalling packages
727: 4.1.4. Getting information about installed packages
728: 4.1.5. Checking for security vulnerabilities in installed packages
729: 4.1.6. Finding if newer versions of your installed packages are in
730: pkgsrc
731: 4.1.7. Other administrative functions
732: 4.1.8. A word of warning
733:
734: 4.2. Building packages from source
735:
736: 4.2.1. Requirements
737: 4.2.2. Fetching distfiles
738: 4.2.3. How to build and install
739:
740: 5. Configuring pkgsrc
741:
742: 5.1. General configuration
743: 5.2. Variables affecting the build process
1.9 rillig 744: 5.3. Variables affecting the installation process
1.4 rillig 745: 5.4. Selecting and configuring the compiler
1.1 dsieger 746:
1.4 rillig 747: 5.4.1. Selecting the compiler
748: 5.4.2. Additional flags to the compiler (CFLAGS)
749: 5.4.3. Additional flags to the linker (LDFLAGS)
1.1 dsieger 750:
1.4 rillig 751: 5.5. Developer/advanced settings
752: 5.6. Selecting Build Options
1.1 dsieger 753:
754: 6. Creating binary packages
755:
756: 6.1. Building a single binary package
757: 6.2. Settings for creation of binary packages
758:
1.6 rillig 759: 7. Creating binary packages for everything in pkgsrc (bulk builds)
760:
1.71 wiz 761: 7.1. Preparations
762: 7.2. Running a pbulk-style bulk build
1.6 rillig 763:
1.71 wiz 764: 7.2.1. Configuration
1.6 rillig 765:
1.71 wiz 766: 7.3. Requirements of a full bulk build
1.66 asau 767: 7.4. Creating a multiple CD-ROM packages collection
1.6 rillig 768:
1.66 asau 769: 7.4.1. Example of cdpack
1.6 rillig 770:
771: 8. Directory layout of the installed files
772:
773: 8.1. File system layout in ${LOCALBASE}
774: 8.2. File system layout in ${VARBASE}
775:
776: 9. Frequently Asked Questions
777:
778: 9.1. Are there any mailing lists for pkg-related discussion?
779: 9.2. Where's the pkgviews documentation?
780: 9.3. Utilities for package management (pkgtools)
781: 9.4. How to use pkgsrc as non-root
782: 9.5. How to resume transfers when fetching distfiles?
783: 9.6. How can I install/use modular X.org from pkgsrc?
784: 9.7. How to fetch files from behind a firewall
1.65 wiz 785: 9.8. How to fetch files from HTTPS sites
786: 9.9. How do I tell make fetch to do passive FTP?
787: 9.10. How to fetch all distfiles at once
788: 9.11. What does "Don't know how to make /usr/share/tmac/tmac.andoc" mean?
789: 9.12. What does "Could not find bsd.own.mk" mean?
790: 9.13. Using 'sudo' with pkgsrc
791: 9.14. How do I change the location of configuration files?
792: 9.15. Automated security checks
793: 9.16. Why do some packages ignore my CFLAGS?
794: 9.17. A package does not build. What shall I do?
795: 9.18. What does "Makefile appears to contain unresolved cvs/rcs/??? merge
1.24 wiz 796: conflicts" mean?
1.1 dsieger 797:
798: Chapter 2. Where to get pkgsrc and how to keep it up-to-date
799:
800: Table of Contents
801:
802: 2.1. Getting pkgsrc for the first time
803:
1.52 asau 804: 2.1.1. As tar archive
1.24 wiz 805: 2.1.2. Via anonymous CVS
1.1 dsieger 806:
807: 2.2. Keeping pkgsrc up-to-date
808:
809: 2.2.1. Via tar files
810: 2.2.2. Via CVS
811:
812: Before you download and extract the files, you need to decide where you want to
813: extract them. When using pkgsrc as root user, pkgsrc is usually installed in /
814: usr/pkgsrc. You are though free to install the sources and binary packages
815: wherever you want in your filesystem, provided that the pathname does not
816: contain white-space or other characters that are interpreted specially by the
817: shell and some other programs. A safe bet is to use only letters, digits,
818: underscores and dashes.
819:
820: 2.1. Getting pkgsrc for the first time
821:
1.25 wiz 822: Before you download any pkgsrc files, you should decide whether you want the
1.1 dsieger 823: current branch or the stable branch. The latter is forked on a quarterly basis
824: from the current branch and only gets modified for security updates. The names
825: of the stable branches are built from the year and the quarter, for example
1.22 snj 826: 2009Q1.
1.1 dsieger 827:
828: The second step is to decide how you want to download pkgsrc. You can get it as
1.24 wiz 829: a tar file or via CVS. Both ways are described here.
1.1 dsieger 830:
1.52 asau 831: Note that tar archive contains CVS working copy. Thus you can switch to using
832: CVS at any later time.
1.1 dsieger 833:
1.52 asau 834: Note also that quarterly branch is not frozen in stone. It receives critical
835: updates.
836:
837: 2.1.1. As tar archive
838:
839: The primary download location for all pkgsrc files is http://ftp.NetBSD.org/pub
840: /pkgsrc/ or ftp://ftp.NetBSD.org/pub/pkgsrc/ (it points to the same location).
841: There are a number of subdirectories for different purposes, which are
1.1 dsieger 842: described in detail in Appendix C, Directory layout of the pkgsrc FTP server.
843:
1.52 asau 844: The tar archive for the current branch is in the directory current and is
845: called pkgsrc.tar.gz. It is autogenerated daily.
846:
847: To save download time we provide bzip2- and xz-compressed archives which are
848: published at pkgsrc.tar.bz2 and pkgsrc.tar.xz respectively.
849:
850: You can fetch the same files using FTP.
1.1 dsieger 851:
1.59 jnemeth 852: The tar file for the stable branch 2013Q1 is in the directory pkgsrc-2013Q1 and
853: is also called pkgsrc.tar.gz.
1.1 dsieger 854:
1.12 weinem 855: To download a pkgsrc stable tarball, run:
856:
1.59 jnemeth 857: $ ftp ftp://ftp.NetBSD.org/pub/pkgsrc/pkgsrc-20xxQy/pkgsrc.tar.gz
1.12 weinem 858:
1.25 wiz 859: Where pkgsrc-20xxQy is the stable branch to be downloaded, for example, "
1.59 jnemeth 860: pkgsrc-2013Q1".
1.12 weinem 861:
1.52 asau 862: You can use fetch it also using "wget", "curl", or your web browser.
863:
1.12 weinem 864: Then, extract it with:
865:
1.23 jakllsch 866: $ tar -xzf pkgsrc-20xxQy.tar.gz -C /usr
1.12 weinem 867:
868: This will create the directory pkgsrc/ in /usr/ and all the package source will
869: be stored under /usr/pkgsrc/.
870:
871: To download pkgsrc-current, run:
872:
873: $ ftp ftp://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc.tar.gz
1.1 dsieger 874:
1.24 wiz 875: 2.1.2. Via anonymous CVS
1.1 dsieger 876:
1.24 wiz 877: To fetch a specific pkgsrc stable branch, run:
1.1 dsieger 878:
1.40 wiz 879: $ cd /usr && cvs -q -z2 -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -r pkgsrc-20xxQy -P pkgsrc
1.1 dsieger 880:
1.25 wiz 881: Where pkgsrc-20xxQy is the stable branch to be checked out, for example, "
882: pkgsrc-2009Q1"
1.13 weinem 883:
1.24 wiz 884: This will create the directory pkgsrc/ in your /usr/ directory and all the
885: package source will be stored under /usr/pkgsrc/.
886:
887: To fetch the pkgsrc current branch, run:
1.1 dsieger 888:
1.40 wiz 889: $ cd /usr && cvs -q -z2 -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -P pkgsrc
1.1 dsieger 890:
1.30 dholland 891: Refer to the list of available mirrors to choose a faster CVS mirror, if
892: needed.
1.1 dsieger 893:
1.24 wiz 894: If you get error messages from rsh, you need to set CVS_RSH variable. E.g.:
1.1 dsieger 895:
1.40 wiz 896: $ cd /usr && env CVS_RSH=ssh cvs -q -z2 -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -P pkgsrc
1.1 dsieger 897:
1.24 wiz 898: Refer to documentation on your command shell how to set CVS_RSH=ssh
899: permanently. For Bourne shells, you can set it in your .profile or better
900: globally in /etc/profile:
901:
902: # set CVS remote shell command
903: CVS_RSH=ssh
904: export CVS_RSH
1.12 weinem 905:
1.13 weinem 906: By default, CVS doesn't do things like most people would expect it to do. But
907: there is a way to convince CVS, by creating a file called .cvsrc in your home
1.12 weinem 908: directory and saving the following lines to it. This file will save you lots of
909: headache and some bug reports, so we strongly recommend it. You can find an
910: explanation of this file in the CVS documentation.
1.2 rillig 911:
912: # recommended CVS configuration file from the pkgsrc guide
1.40 wiz 913: cvs -q -z2
1.2 rillig 914: checkout -P
1.4 rillig 915: update -dP
916: diff -upN
1.2 rillig 917: rdiff -u
1.24 wiz 918: release -d
1.1 dsieger 919:
920: 2.2. Keeping pkgsrc up-to-date
921:
922: The preferred way to keep pkgsrc up-to-date is via CVS (which also works if you
923: have first installed it via a tar file). It saves bandwidth and hard disk
924: activity, compared to downloading the tar file again.
925:
926: 2.2.1. Via tar files
927:
928: Warning
929:
930: When updating from a tar file, you first need to completely remove the old
931: pkgsrc directory. Otherwise those files that have been removed from pkgsrc in
932: the mean time will not be removed on your local disk, resulting in
933: inconsistencies. When removing the old files, any changes that you have done to
934: the pkgsrc files will be lost after updating. Therefore updating via CVS is
935: strongly recommended.
936:
937: Note that by default the distfiles and the binary packages are saved in the
938: pkgsrc tree, so don't forget to rescue them before updating. You can also
939: configure pkgsrc to use other than the default directories by setting the
940: DISTDIR and PACKAGES variables. See Chapter 5, Configuring pkgsrc for the
941: details.
942:
943: To update pkgsrc from a tar file, download the tar file as explained above.
944: Then, make sure that you have not made any changes to the files in the pkgsrc
945: directory. Remove the pkgsrc directory and extract the new tar file. Done.
946:
947: 2.2.2. Via CVS
948:
1.26 spz 949: To update pkgsrc via CVS, change to the pkgsrc directory and run cvs:
1.12 weinem 950:
1.26 spz 951: $ cd /usr/pkgsrc && cvs update -dP
952:
953: If you get error messages from rsh, you need to set CVS_RSH variable as
954: described above. E.g.:
955:
956: $ cd /usr/pkgsrc && env CVS_RSH=ssh cvs up -dP
1.1 dsieger 957:
958: 2.2.2.1. Switching between different pkgsrc branches
959:
960: When updating pkgsrc, the CVS program keeps track of the branch you selected.
961: But if you, for whatever reason, want to switch from the stable branch to the
962: current one, you can do it by adding the option "-A" after the "update"
1.25 wiz 963: keyword. To switch from the current branch back to the stable branch, add the "
964: -rpkgsrc-2009Q3" option.
1.1 dsieger 965:
966: 2.2.2.2. What happens to my changes when updating?
967:
968: When you update pkgsrc, the CVS program will only touch those files that are
969: registered in the CVS repository. That means that any packages that you created
970: on your own will stay unmodified. If you change files that are managed by CVS,
971: later updates will try to merge your changes with those that have been done by
972: others. See the CVS manual, chapter "update" for details.
973:
974: Chapter 3. Using pkgsrc on systems other than NetBSD
975:
976: Table of Contents
977:
978: 3.1. Binary distribution
979: 3.2. Bootstrapping pkgsrc
980: 3.3. Platform-specific notes
981:
1.46 obache 982: 3.3.1. Cygwin
983: 3.3.2. Darwin (Mac OS X)
984: 3.3.3. FreeBSD
1.58 ryoon 985: 3.3.4. GNU/kFreeBSD
986: 3.3.5. Interix
987: 3.3.6. IRIX
988: 3.3.7. Linux
989: 3.3.8. MirBSD
990: 3.3.9. OpenBSD
991: 3.3.10. Solaris
1.1 dsieger 992:
993: 3.1. Binary distribution
994:
1.9 rillig 995: See Section 4.1, "Using binary packages".
1.1 dsieger 996:
997: 3.2. Bootstrapping pkgsrc
998:
1.44 asau 999: pkgsrc can be bootstrapped for use in two different modes: privileged and
1000: unprivileged one. In unprivileged mode in contrast to privileged one all
1.45 asau 1001: programs are installed under one particular user and cannot utilise privileged
1.44 asau 1002: operations (packages don't create special users and all special file
1003: permissions like setuid are ignored).
1004:
1.1 dsieger 1005: Installing the bootstrap kit from source should be as simple as:
1006:
1.60 asau 1007: # env CVS_RSH=ssh cvs -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -P pkgsrc
1.1 dsieger 1008: # cd pkgsrc/bootstrap
1009: # ./bootstrap
1010:
1011:
1.44 asau 1012: To bootstrap in unprivileged mode pass "--unprivileged" flag to bootstrap
1013:
1014: By default, in privileged mode pkgsrc uses /usr/pkg for prefix where programs
1015: will be installed in, and /var/db/pkg for the package database directory where
1016: pkgsrc will do its internal bookkeeping, /var is used as varbase, where
1017: packages install their persistent data. In unprivileged mode pkgsrc uses ~/pkg
1018: for prefix, ~/pkg/var/db/pkg for the package database, and ~/pkg/var for
1019: varbase.
1020:
1021: You can change default layout using command-line arguments. Run "./bootstrap
1022: --help" to get details.
1.1 dsieger 1023:
1024: Note
1025:
1026: The bootstrap installs a bmake tool. Use this bmake when building via pkgsrc.
1027: For examples in this guide, use bmake instead of "make".
1028:
1.44 asau 1029: Note
1030:
1031: It is possible to bootstrap multiple instances of pkgsrc using non-intersecting
1032: directories. Use bmake corresponding to the installation you're working with to
1033: build and install packages.
1034:
1.1 dsieger 1035: 3.3. Platform-specific notes
1036:
1037: Here are some platform-specific notes you should be aware of.
1038:
1.46 obache 1039: 3.3.1. Cygwin
1040:
1041: Cygwin 1.7.x and later are supported.
1042:
1043: You need to install minimal base packages in `Base' category plus any of
1044: compiler, gcc, gcc4, and/or clang. For gcc and gcc4, C and C++ compiler will be
1045: installed by default, but you can install Fortran compiler additionally because
1046: it will be required to use libtool. If it is not installed (or too old),
1047: Fortran compiler will be installed with pkgsrc automatically.
1048:
1049: As noted in Cygwin FAQ: `Why doesn't su work?', su(1) command has been in
1050: Cygwin distribution, but it has never worked. Unless you bootstrap pkgsrc with
1051: the --unprivileged option, workaround is:
1052:
1053: * Right click "Cygwin Terminal" in your Start Menu, then pick "Run as
1054: administrator".
1055:
1056: 3.3.2. Darwin (Mac OS X)
1.1 dsieger 1057:
1.42 asau 1058: Darwin 5.x and up are supported.
1059:
1060: Before you start, you need to download and install the Mac OS X Developer Tools
1061: from Apple's Developer Connection. This requires (free) membership. See http://
1062: developer.apple.com/macosx/ for details. Also, make sure you install X11 (an
1063: optional package included with the Developer Tools) if you intend to build
1064: packages that use the X11 Window System. (If you don't want or need the full
1065: Xcode GUI, download and install Command Line Tools for Xcode.)
1.1 dsieger 1066:
1.46 obache 1067: 3.3.3. FreeBSD
1.1 dsieger 1068:
1.30 dholland 1069: FreeBSD 8.3 and 9.0 have been tested and are supported, other versions may
1.1 dsieger 1070: work.
1071:
1072: Care should be taken so that the tools that this kit installs do not conflict
1073: with the FreeBSD userland tools. There are several steps:
1074:
1075: 1. FreeBSD stores its ports pkg database in /var/db/pkg. It is therefore
1076: recommended that you choose a different location (e.g. /usr/pkgdb) by using
1077: the --pkgdbdir option to the bootstrap script.
1078:
1079: 2. If you do not intend to use the FreeBSD ports tools, it's probably a good
1080: idea to move them out of the way to avoid confusion, e.g.
1081:
1082: # cd /usr/sbin
1083: # mv pkg_add pkg_add.orig
1084: # mv pkg_create pkg_create.orig
1085: # mv pkg_delete pkg_delete.orig
1086: # mv pkg_info pkg_info.orig
1087:
1088:
1.4 rillig 1089: 3. An example mk.conf file will be placed in /etc/mk.conf.example file when
1090: you use the bootstrap script.
1.1 dsieger 1091:
1.58 ryoon 1092: 3.3.4. GNU/kFreeBSD
1093:
1094: Debian GNU/kFreeBSD is the only GNU/kFreeBSD distribution now. Debian GNU/
1095: kFreeBSD 7.0 or later is tested and supported.
1096:
1097: You should install ncurses (libncurses and libncurses-dev) packages.
1098:
1099: 3.3.5. Interix
1.1 dsieger 1100:
1101: Interix is a POSIX-compatible subsystem for the Windows NT kernel, providing a
1102: Unix-like environment with a tighter kernel integration than available with
1103: Cygwin. It is part of the Windows Services for Unix package, available for free
1104: for any licensed copy of Windows 2000, XP (not including XP Home), or 2003. SFU
1105: can be downloaded from http://www.microsoft.com/windows/sfu/.
1106:
1107: Services for Unix 3.5 has been tested. 3.0 or 3.1 may work, but are not
1108: officially supported. (The main difference in 3.0/3.1 is lack of pthreads, but
1109: other parts of libc may also be lacking.)
1110:
1111: Services for Unix Applications (aka SUA) is an integrated component of Windows
1.24 wiz 1112: Server 2003 R2 (5.2), Windows Vista and Windows Server 2008 (6.0), Windows 7
1.25 wiz 1113: and Windows Server 2008 R2 (6.1). As of this writing, the SUA's Interix 6.0
1114: (32bit) and 6.1 (64bit) subsystems have been tested. Other versions may work as
1115: well. The Interix 5.x subsystem has not yet been tested with pkgsrc.
1.1 dsieger 1116:
1.58 ryoon 1117: 3.3.5.1. When installing Interix/SFU
1.1 dsieger 1118:
1119: At an absolute minimum, the following packages must be installed from the
1120: Windows Services for Unix 3.5 distribution in order to use pkgsrc:
1121:
1122: * Utilities -> Base Utilities
1123:
1124: * Interix GNU Components -> (all)
1125:
1126: * Remote Connectivity
1127:
1128: * Interix SDK
1129:
1130: When using pkgsrc on Interix, DO NOT install the Utilities subcomponent "UNIX
1131: Perl". That is Perl 5.6 without shared module support, installed to /usr/local,
1132: and will only cause confusion. Instead, install Perl 5.8 from pkgsrc (or from a
1133: binary package).
1134:
1135: The Remote Connectivity subcomponent "Windows Remote Shell Service" does not
1136: need to be installed, but Remote Connectivity itself should be installed in
1137: order to have a working inetd.
1138:
1139: During installation you may be asked whether to enable setuid behavior for
1140: Interix programs, and whether to make pathnames default to case-sensitive.
1141: Setuid should be enabled, and case-sensitivity MUST be enabled. (Without
1142: case-sensitivity, a large number of packages including perl will not build.)
1143:
1144: NOTE: Newer Windows service packs change the way binary execution works (via
1145: the Data Execution Prevention feature). In order to use pkgsrc and other
1146: gcc-compiled binaries reliably, a hotfix containing POSIX.EXE, PSXDLL.DLL,
1147: PSXRUN.EXE, and PSXSS.EXE (899522 or newer) must be installed. Hotfixes are
1.14 jmcneill 1148: available from Microsoft through a support contract; however, Debian Interix
1149: Port has made most Interix hotfixes available for personal use from http://
1150: www.debian-interix.net/hotfixes/.
1.1 dsieger 1151:
1152: In addition to the hotfix noted above, it may be necessary to disable Data
1153: Execution Prevention entirely to make Interix functional. This may happen only
1154: with certain types of CPUs; the cause is not fully understood at this time. If
1155: gcc or other applications still segfault repeatedly after installing one of the
1156: hotfixes note above, the following option can be added to the appropriate
1157: "boot.ini" line on the Windows boot drive: /NoExecute=AlwaysOff (WARNING, this
1158: will disable DEP completely, which may be a security risk if applications are
1159: often run as a user in the Administrators group!)
1160:
1.58 ryoon 1161: 3.3.5.2. What to do if Interix/SFU is already installed
1.1 dsieger 1162:
1163: If SFU is already installed and you wish to alter these settings to work with
1164: pkgsrc, note the following things.
1165:
1166: * To uninstall UNIX Perl, use Add/Remove Programs, select Microsoft Windows
1167: Services for UNIX, then click Change. In the installer, choose Add or
1168: Remove, then uncheck Utilities->UNIX Perl.
1169:
1170: * To enable case-sensitivity for the file system, run REGEDIT.EXE, and change
1171: the following registry key:
1172:
1173: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\kernel
1174:
1175: Set the DWORD value "obcaseinsensitive" to 0; then reboot.
1176:
1177: * To enable setuid binaries (optional), run REGEDIT.EXE, and change the
1178: following registry key:
1179:
1180: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Services for UNIX
1181:
1182: Set the DWORD value "EnableSetuidBinaries" to 1; then reboot.
1183:
1.58 ryoon 1184: 3.3.5.3. Important notes for using pkgsrc
1.1 dsieger 1185:
1186: The package manager (either the pkgsrc "su" user, or the user running
1187: "pkg_add") must be a member of the local Administrators group. Such a user must
1188: also be used to run the bootstrap. This is slightly relaxed from the normal
1189: pkgsrc requirement of "root".
1190:
1191: The package manager should use a umask of 002. "make install" will
1192: automatically complain if this is not the case. This ensures that directories
1193: written in /var/db/pkg are Administrators-group writeable.
1194:
1195: The popular Interix binary packages from http://www.interopsystems.com/ use an
1196: older version of pkgsrc's pkg_* tools. Ideally, these should NOT be used in
1197: conjunction with pkgsrc. If you choose to use them at the same time as the
1198: pkgsrc packages, ensure that you use the proper pkg_* tools for each type of
1199: binary package.
1200:
1201: The TERM setting used for DOS-type console windows (including those invoked by
1202: the csh and ksh startup shortcuts) is "interix". Most systems don't have a
1203: termcap/terminfo entry for it, but the following .termcap entry provides
1204: adequate emulation in most cases:
1205:
1206: interix:kP=\E[S:kN=\E[T:kH=\E[U:dc@:DC@:tc=pcansi:
1207:
1208:
1.58 ryoon 1209: 3.3.5.4. Limitations of the Interix platform
1.1 dsieger 1210:
1211: Though Interix suffices as a familiar and flexible substitute for a full
1212: Unix-like platform, it has some drawbacks that should be noted for those
1213: desiring to make the most of Interix.
1214:
1215: * X11:
1216:
1217: Interix comes with the standard set of X11R6 client libraries, and can run
1218: X11 based applications, but it does not come with an X server. Some options
1219: are StarNet X-Win32, Hummingbird Exceed (available in a trimmed version for
1220: Interix from Interop Systems as the Interop X Server), and the free X11
1221: server included with Cygwin.
1222:
1223: * X11 acceleration:
1224:
1225: Because Interix runs in a completely different NT subsystem from Win32
1226: applications, it does not currently support various X11 protocol extensions
1227: for acceleration (such as MIT-SHM or DGA). Most interactive applications to
1228: a local X server will run reasonably fast, but full motion video and other
1229: graphics intensive applications may require a faster-than-expected CPU.
1230:
1231: * Audio:
1232:
1233: Interix has no native support for audio output. For audio support, pkgsrc
1234: uses the esound client/server audio system on Interix. Unlike on most
1235: platforms, the audio/esound package does not contain the esd server
1236: component. To output audio via an Interix host, the emulators/cygwin_esound
1237: package must also be installed.
1238:
1239: * CD/DVDs, USB, and SCSI:
1240:
1241: Direct device access is not currently supported in Interix, so it is not
1242: currently possible to access CD/DVD drives, USB devices, or SCSI devices
1243: through non-filesystem means. Among other things, this makes it impossible
1244: to use Interix directly for CD/DVD burning.
1245:
1246: * Tape drives:
1247:
1248: Due to the same limitations as for CD-ROMs and SCSI devices, tape drives
1249: are also not directly accessible in Interix. However, support is in work to
1250: make tape drive access possible by using Cygwin as a bridge (similarly to
1251: audio bridged via Cygwin's esound server).
1252:
1.58 ryoon 1253: 3.3.5.5. Known issues for pkgsrc on Interix
1.1 dsieger 1254:
1255: It is not necessary, in general, to have a "root" user on the Windows system;
1256: any member of the local Administrators group will suffice. However, some
1257: packages currently assume that the user named "root" is the privileged user. To
1258: accommodate these, you may create such a user; make sure it is in the local
1259: group Administrators (or your language equivalent).
1260:
1261: pkg_add creates directories of mode 0755, not 0775, in $PKG_DBDIR. For the time
1262: being, install packages as the local Administrator (or your language
1263: equivalent), or run the following command after installing a package to work
1264: around the issue:
1265:
1266: # chmod -R g+w $PKG_DBDIR
1267:
1268:
1.58 ryoon 1269: 3.3.6. IRIX
1.1 dsieger 1270:
1271: You will need a working C compiler, either gcc or SGI's MIPS and MIPSpro
1272: compiler (cc/c89). Please set the CC environment variable according to your
1273: preference. If you do not have a license for the MIPSpro compiler suite, you
1274: can download a gcc tardist file from http://freeware.sgi.com/.
1275:
1276: Please note that you will need IRIX 6.5.17 or higher, as this is the earliest
1277: version of IRIX providing support for if_indextoname(3), if_nametoindex(3),
1278: etc.
1279:
1280: At this point in time, pkgsrc only supports one ABI at a time. That is, you
1281: cannot switch between the old 32-bit ABI, the new 32-bit ABI and the 64-bit
1282: ABI. If you start out using "abi=n32", that's what all your packages will be
1283: built with.
1284:
1285: Therefore, please make sure that you have no conflicting CFLAGS in your
1.4 rillig 1286: environment or the mk.conf. Particularly, make sure that you do not try to link
1287: n32 object files with lib64 or vice versa. Check your /etc/compiler.defaults!
1.1 dsieger 1288:
1289: If you have the actual pkgsrc tree mounted via NFS from a different host,
1290: please make sure to set WRKOBJDIR to a local directory, as it appears that IRIX
1291: linker occasionally runs into issues when trying to link over a network-mounted
1292: file system.
1293:
1294: The bootstrapping process should set all the right options for programs such as
1295: imake(1), but you may want to set some options depending on your local setup.
1296: Please see pkgsrc/mk/defaults/mk.conf and, of course, your compiler's man pages
1297: for details.
1298:
1299: If you are using SGI's MIPSPro compiler, please set
1300:
1301: PKGSRC_COMPILER= mipspro
1302:
1303:
1.4 rillig 1304: in mk.conf. Otherwise, pkgsrc will assume you are using gcc and may end up
1.1 dsieger 1305: passing invalid flags to the compiler. Note that bootstrap should create an
1306: appropriate mk.conf.example by default.
1307:
1308: If you have both the MIPSPro compiler chain installed as well as gcc, but want
1309: to make sure that MIPSPro is used, please set your PATH to not include the
1310: location of gcc (often /usr/freeware/bin), and (important) pass the
1311: '--preserve-path' flag.
1312:
1.58 ryoon 1313: 3.3.7. Linux
1.1 dsieger 1314:
1315: Some versions of Linux (for example Debian GNU/Linux) need either libtermcap or
1316: libcurses (libncurses). Installing the distributions libncurses-dev package (or
1317: equivalent) should fix the problem.
1318:
1319: pkgsrc supports both gcc (GNU Compiler Collection) and icc (Intel C++
1320: Compiler). gcc is the default. icc 8.0 and 8.1 on i386 have been tested.
1321:
1322: To bootstrap using icc, assuming the default icc installation directory:
1323:
1.32 wiz 1324: env ICCBASE=/opt/intel/cc/10.1.008 ./bootstrap --compiler=icc
1.1 dsieger 1325:
1326:
1327: Note
1328:
1.32 wiz 1329: For icc 8.0 you must add `LDFLAGS=-static-libcxa' to this.
1.1 dsieger 1330:
1.32 wiz 1331: For icc 8.1 you must add `LDFLAGS=-i-static' instead.
1.1 dsieger 1332:
1.32 wiz 1333: For icc 10.1 neither of these appears to be necessary.
1.1 dsieger 1334:
1.32 wiz 1335: Use a value for ICCBASE that corresponds to the directory where icc is
1336: installed. After bootstrapping, set ICCBASE in mk.conf:
1.1 dsieger 1337:
1.32 wiz 1338: ICCBASE= /opt/intel/cc/10.1.008
1.1 dsieger 1339:
1340:
1.32 wiz 1341: The pkgsrc default for ICCBASE is /opt/intel_cc_80. This is the default install
1342: directory for icc 8.0. If you are using a more recent version, be sure to set
1343: the correct path explicitly.
1.1 dsieger 1344:
1345: pkgsrc uses the static linking method of the runtime libraries provided by icc,
1346: so binaries can be run on other systems which do not have the shared libraries
1347: installed.
1348:
1349: Libtool, however, extracts a list of libraries from the ld(1) command run when
1350: linking a C++ shared library and records it, throwing away the -Bstatic and
1351: -Bdynamic options interspersed between the libraries. This means that
1352: libtool-linked C++ shared libraries will have a runtime dependency on the icc
1353: libraries until this is fixed in libtool.
1354:
1.58 ryoon 1355: 3.3.8. MirBSD
1356:
1357: pkgsrc has been tested on MirBSD #10-current (2011 and newer). Older versions
1358: might also work. Releases before #10 are not supported.
1359:
1360: The package tools of the (older) native ports tree, MirPorts, have the same
1361: names as the ones used by pkgsrc. Care should be taken that the right tools are
1362: used. When installing packages from source, use the bmake command for pkgsrc
1363: and mmake for MirPorts.
1364:
1365: pkgsrc and MirPorts use the same location for the package database, /var/db/
1366: pkg. It is strongly recommended to use /usr/pkg/db instead, so that the pkgsrc
1367: tree is self-contained. This is also the default setting used in the binary
1368: package builds.
1369:
1370: Binary packages for MirBSD/i386 can be found on the pkgsrc ftp server. The
1371: bootstrap kit there already contains the pkgin package manager. See the pkgsrc
1372: on MirOS page for more details.
1373:
1374: 3.3.9. OpenBSD
1.1 dsieger 1375:
1.30 dholland 1376: OpenBSD 5.1 has been tested and supported, other versions may work.
1.1 dsieger 1377:
1378: Care should be taken so that the tools that this kit installs do not conflict
1379: with the OpenBSD userland tools. There are several steps:
1380:
1381: 1. OpenBSD stores its ports pkg database in /var/db/pkg. It is therefore
1382: recommended that you choose a different location (e.g. /usr/pkgdb) by using
1383: the --pkgdbdir option to the bootstrap script.
1384:
1385: 2. If you do not intend to use the OpenBSD ports tools, it's probably a good
1386: idea to move them out of the way to avoid confusion, e.g.
1387:
1388: # cd /usr/sbin
1389: # mv pkg_add pkg_add.orig
1390: # mv pkg_create pkg_create.orig
1391: # mv pkg_delete pkg_delete.orig
1392: # mv pkg_info pkg_info.orig
1393:
1394:
1.4 rillig 1395: 3. An example mk.conf file will be placed in /etc/mk.conf.example file when
1396: you use the bootstrap script. OpenBSD's make program uses mk.conf as well.
1397: You can work around this by enclosing all the pkgsrc-specific parts of the
1398: file with:
1.1 dsieger 1399:
1400: .ifdef BSD_PKG_MK
1401: # pkgsrc stuff, e.g. insert defaults/mk.conf or similar here
1402: .else
1403: # OpenBSD stuff
1404: .endif
1405:
1406:
1.58 ryoon 1407: 3.3.10. Solaris
1.1 dsieger 1408:
1.36 wiz 1409: Solaris 2.6 through 10 are supported on both x86 and sparc. You will need a
1410: working C compiler. Both gcc 4.5.3 and Sun WorkShop 5 have been tested.
1.1 dsieger 1411:
1412: The following packages are required on Solaris 8 for the bootstrap process and
1413: to build packages.
1414:
1415: * SUNWsprot
1416:
1417: * SUNWarc
1418:
1419: * SUNWbtool
1420:
1421: * SUNWtoo
1422:
1423: * SUNWlibm
1424:
1425: Please note that the use of GNU binutils on Solaris is not supported, as of
1426: June 2006.
1427:
1428: Whichever compiler you use, please ensure the compiler tools and your $prefix
1429: are in your PATH. This includes /usr/ccs/{bin,lib} and e.g. /usr/pkg/
1430: {bin,sbin}.
1431:
1.58 ryoon 1432: 3.3.10.1. If you are using gcc
1.1 dsieger 1433:
1434: It makes life much simpler if you only use the same gcc consistently for
1435: building all packages.
1436:
1437: It is recommended that an external gcc be used only for bootstrapping, then
1.36 wiz 1438: either build gcc from lang/gcc46 or install a binary gcc package, then remove
1439: gcc used during bootstrapping.
1.1 dsieger 1440:
1441: Binary packages of gcc can be found through http://www.sunfreeware.com/.
1442:
1.58 ryoon 1443: 3.3.10.2. If you are using Sun WorkShop
1.1 dsieger 1444:
1445: You will need at least the following packages installed (from WorkShop 5.0)
1446:
1447: * SPROcc - Sun WorkShop Compiler C 5.0
1448:
1449: * SPROcpl - Sun WorkShop Compiler C++ 5.0
1450:
1451: * SPROild - Sun WorkShop Incremental Linker
1452:
1453: * SPROlang - Sun WorkShop Compilers common components
1454:
1455: You should set the following variables in your mk.conf file:
1456:
1457: CC= cc
1458: CXX= CC
1459: CPP= cc -E
1460: CXXCPP= CC -E
1461:
1462: Note
1463:
1464: The CPP setting might break some packages that use the C preprocessor for
1465: processing things other than C source code.
1466:
1.58 ryoon 1467: 3.3.10.3. Building 64-bit binaries with SunPro
1.1 dsieger 1468:
1469: To build 64-bit packages, you just need to have the following lines in your
1470: mk.conf file:
1471:
1472: PKGSRC_COMPILER= sunpro
1473: ABI= 64
1474:
1475: Note
1476:
1477: This setting has been tested for the SPARC architecture. Intel and AMD machines
1478: need some more work.
1479:
1.58 ryoon 1480: 3.3.10.4. Common problems
1.1 dsieger 1481:
1482: Sometimes, when using libtool, /bin/ksh crashes with a segmentation fault. The
1483: workaround is to use another shell for the configure scripts, for example by
1484: installing shells/bash and adding the following lines to your mk.conf:
1485:
1486: CONFIG_SHELL= ${LOCALBASE}/bin/bash
1487: WRAPPER_SHELL= ${LOCALBASE}/bin/bash
1488:
1489:
1490: Then, rebuild the devel/libtool-base package.
1491:
1492: Chapter 4. Using pkgsrc
1493:
1494: Table of Contents
1495:
1496: 4.1. Using binary packages
1497:
1498: 4.1.1. Finding binary packages
1499: 4.1.2. Installing binary packages
1500: 4.1.3. Deinstalling packages
1501: 4.1.4. Getting information about installed packages
1502: 4.1.5. Checking for security vulnerabilities in installed packages
1503: 4.1.6. Finding if newer versions of your installed packages are in pkgsrc
1504: 4.1.7. Other administrative functions
1505: 4.1.8. A word of warning
1506:
1507: 4.2. Building packages from source
1508:
1509: 4.2.1. Requirements
1510: 4.2.2. Fetching distfiles
1511: 4.2.3. How to build and install
1512:
1513: Basically, there are two ways of using pkgsrc. The first is to only install the
1514: package tools and to use binary packages that someone else has prepared. This
1515: is the "pkg" in pkgsrc. The second way is to install the "src" of pkgsrc, too.
1516: Then you are able to build your own packages, and you can still use binary
1517: packages from someone else.
1518:
1519: 4.1. Using binary packages
1520:
1.9 rillig 1521: On the ftp.NetBSD.org server and its mirrors, there are collections of binary
1522: packages, ready to be installed. These binary packages have been built using
1523: the default settings for the directories, that is:
1524:
1525: * /usr/pkg for LOCALBASE, where most of the files are installed,
1526:
1527: * /usr/pkg/etc for configuration files,
1528:
1529: * /var for VARBASE, where those files are installed that may change after
1530: installation.
1531:
1532: If you cannot use these directories for whatever reasons (maybe because you're
1533: not root), you cannot use these binary packages, but have to build the packages
1534: yourself, which is explained in Section 3.2, "Bootstrapping pkgsrc".
1.1 dsieger 1535:
1536: 4.1.1. Finding binary packages
1537:
1.5 weinem 1538: To install binary packages, you first need to know from where to get them. The
1539: first place where you should look is on the main pkgsrc FTP server in the
1540: directory /pub/pkgsrc/packages.
1541:
1542: This directory contains binary packages for multiple platforms. First, select
1543: your operating system. (Ignore the directories with version numbers attached to
1544: it, they just exist for legacy reasons.) Then, select your hardware
1545: architecture, and in the third step, the OS version and the "version" of
1.9 rillig 1546: pkgsrc.
1547:
1548: In this directory, you often find a file called bootstrap.tar.gz which contains
1549: the package management tools. If the file is missing, it is likely that your
1550: operating system already provides those tools. Download the file and extract it
1551: in the / directory. It will create the directories /usr/pkg (containing the
1552: tools for managing binary packages) and /var/db/pkg (the database of installed
1553: packages).
1.1 dsieger 1554:
1555: 4.1.2. Installing binary packages
1556:
1.9 rillig 1557: In the directory from the last section, there is a subdirectory called All,
1558: which contains all the binary packages that are available for the platform,
1559: excluding those that may not be distributed via FTP or CDROM (depending on
1.24 wiz 1560: which medium you are using).
1.9 rillig 1561:
1562: To install packages directly from an FTP or HTTP server, run the following
1563: commands in a Bourne-compatible shell (be sure to su to root first):
1564:
1565: # PATH="/usr/pkg/sbin:$PATH"
1566: # PKG_PATH="ftp://ftp.NetBSD.org/pub/pkgsrc/packages/OPSYS/ARCH/VERSIONS/All"
1567: # export PATH PKG_PATH
1568:
1569: Instead of URLs, you can also use local paths, for example if you are
1570: installing from a set of CDROMs, DVDs or an NFS-mounted repository. If you want
1571: to install packages from multiple sources, you can separate them by a semicolon
1572: in PKG_PATH.
1573:
1574: After these preparations, installing a package is very easy:
1575:
1576: # pkg_add openoffice2
1577: # pkg_add kde-3.5.7
1578: # pkg_add ap2-php5-*
1.1 dsieger 1579:
1580: Note that any prerequisite packages needed to run the package in question will
1581: be installed, too, assuming they are present where you install from.
1582:
1.25 wiz 1583: Adding packages might install vulnerable packages. Thus you should run
1.24 wiz 1584: pkg_admin audit regularly, especially after installing new packages, and verify
1585: that the vulnerabilities are acceptable for your configuration.
1.1 dsieger 1586:
1587: After you've installed packages, be sure to have /usr/pkg/bin and /usr/pkg/sbin
1588: in your PATH so you can actually start the just installed program.
1589:
1590: 4.1.3. Deinstalling packages
1591:
1592: To deinstall a package, it does not matter whether it was installed from source
1593: code or from a binary package. The pkg_delete command does not know it anyway.
1594: To delete a package, you can just run pkg_delete package-name. The package name
1595: can be given with or without version number. Wildcards can also be used to
1596: deinstall a set of packages, for example *emacs*. Be sure to include them in
1597: quotes, so that the shell does not expand them before pkg_delete sees them.
1598:
1599: The -r option is very powerful: it removes all the packages that require the
1600: package in question and then removes the package itself. For example:
1601:
1602: # pkg_delete -r jpeg
1603:
1604:
1605: will remove jpeg and all the packages that used it; this allows upgrading the
1606: jpeg package.
1607:
1608: 4.1.4. Getting information about installed packages
1609:
1610: The pkg_info shows information about installed packages or binary package
1611: files.
1612:
1613: 4.1.5. Checking for security vulnerabilities in installed packages
1614:
1615: The NetBSD Security-Officer and Packages Groups maintain a list of known
1616: security vulnerabilities to packages which are (or have been) included in
1617: pkgsrc. The list is available from the NetBSD FTP site at ftp://ftp.NetBSD.org/
1618: pub/pkgsrc/distfiles/vulnerabilities.
1619:
1.23 jakllsch 1620: Through pkg_admin fetch-pkg-vulnerabilities, this list can be downloaded
1621: automatically, and a security audit of all packages installed on a system can
1622: take place.
1623:
1624: There are two components to auditing. The first step, pkg_admin
1625: fetch-pkg-vulnerabilities, is for downloading the list of vulnerabilities from
1626: the NetBSD FTP site. The second step, pkg_admin audit, checks to see if any of
1627: your installed packages are vulnerable. If a package is vulnerable, you will
1628: see output similar to the following:
1.1 dsieger 1629:
1630: Package samba-2.0.9 has a local-root-shell vulnerability, see
1631: http://www.samba.org/samba/whatsnew/macroexploit.html
1632:
1.23 jakllsch 1633: You may wish to have the vulnerabilities file downloaded daily so that it
1634: remains current. This may be done by adding an appropriate entry to the root
1635: users crontab(5) entry. For example the entry
1636:
1637: # download vulnerabilities file
1638: 0 3 * * * /usr/sbin/pkg_admin fetch-pkg-vulnerabilities >/dev/null 2>&1
1639:
1640:
1641: will update the vulnerability list every day at 3AM. You may wish to do this
1642: more often than once a day. In addition, you may wish to run the package audit
1643: from the daily security script. This may be accomplished by adding the
1644: following line to /etc/security.local:
1645:
1646: /usr/sbin/pkg_admin audit
1647:
1.1 dsieger 1648:
1649: 4.1.6. Finding if newer versions of your installed packages are in pkgsrc
1650:
1.12 weinem 1651: Install pkgtools/lintpkgsrc and run lintpkgsrc with the "-i" argument to check
1652: if your packages are up-to-date, e.g.
1.1 dsieger 1653:
1654: % lintpkgsrc -i
1655: ...
1656: Version mismatch: 'tcsh' 6.09.00 vs 6.10.00
1657:
1658:
1659: You can then use make update to update the package on your system and rebuild
1660: any dependencies.
1661:
1662: 4.1.7. Other administrative functions
1663:
1664: The pkg_admin executes various administrative functions on the package system.
1665:
1666: 4.1.8. A word of warning
1667:
1668: Please pay very careful attention to the warnings expressed in the pkg_add(1)
1669: manual page about the inherent dangers of installing binary packages which you
1670: did not create yourself, and the security holes that can be introduced onto
1671: your system by indiscriminate adding of such files.
1672:
1673: The same warning of course applies to every package you install from source
1674: when you haven't completely read and understood the source code of the package,
1675: the compiler that is used to build the package and all the other tools that are
1676: involved.
1677:
1678: 4.2. Building packages from source
1679:
1680: After obtaining pkgsrc, the pkgsrc directory now contains a set of packages,
1.25 wiz 1681: organized into categories. You can browse the online index of packages, or run
1.1 dsieger 1682: make readme from the pkgsrc directory to build local README.html files for all
1683: packages, viewable with any web browser such as www/lynx or www/firefox.
1684:
1685: The default prefix for installed packages is /usr/pkg. If you wish to change
1686: this, you should do so by setting LOCALBASE in mk.conf. You should not try to
1687: use multiple different LOCALBASE definitions on the same system (inside a
1688: chroot is an exception).
1689:
1690: The rest of this chapter assumes that the package is already in pkgsrc. If it
1691: is not, see Part II, "The pkgsrc developer's guide" for instructions how to
1692: create your own packages.
1693:
1694: 4.2.1. Requirements
1695:
1696: To build packages from source, you need a working C compiler. On NetBSD, you
1697: need to install the "comp" and the "text" distribution sets. If you want to
1698: build X11-related packages, the "xbase" and "xcomp" distribution sets are
1699: required, too.
1700:
1701: 4.2.2. Fetching distfiles
1702:
1703: The first step for building a package is downloading the distfiles (i.e. the
1704: unmodified source). If they have not yet been downloaded, pkgsrc will fetch
1705: them automatically.
1706:
1707: If you have all files that you need in the distfiles directory, you don't need
1708: to connect. If the distfiles are on CD-ROM, you can mount the CD-ROM on /cdrom
1709: and add:
1710:
1711: DISTDIR=/cdrom/pkgsrc/distfiles
1712:
1713: to your mk.conf.
1714:
1715: By default a list of distribution sites will be randomly intermixed to prevent
1716: huge load on servers which holding popular packages (for example,
1717: SourceForge.net mirrors). Thus, every time when you need to fetch yet another
1718: distfile all the mirrors will be tried in new (random) order. You can turn this
1719: feature off by setting MASTER_SORT_RANDOM=NO (for PKG_DEVELOPERs it's already
1720: disabled).
1721:
1722: You can overwrite some of the major distribution sites to fit to sites that are
1723: close to your own. By setting one or two variables you can modify the order in
1724: which the master sites are accessed. MASTER_SORT contains a whitespace
1725: delimited list of domain suffixes. MASTER_SORT_REGEX is even more flexible, it
1726: contains a whitespace delimited list of regular expressions. It has higher
1727: priority than MASTER_SORT. Have a look at pkgsrc/mk/defaults/mk.conf to find
1728: some examples. This may save some of your bandwidth and time.
1729:
1730: You can change these settings either in your shell's environment, or, if you
1.4 rillig 1731: want to keep the settings, by editing the mk.conf file, and adding the
1.1 dsieger 1732: definitions there.
1733:
1734: If a package depends on many other packages (such as meta-pkgs/kde3), the build
1735: process may alternate between periods of downloading source, and compiling. To
1736: ensure you have all the source downloaded initially you can run the command:
1737:
1738: % make fetch-list | sh
1739:
1740: which will output and run a set of shell commands to fetch the necessary files
1741: into the distfiles directory. You can also choose to download the files
1742: manually.
1743:
1744: 4.2.3. How to build and install
1745:
1746: Once the software has downloaded, any patches will be applied, then it will be
1747: compiled for you. This may take some time depending on your computer, and how
1748: many other packages the software depends on and their compile time.
1749:
1750: Note
1751:
1752: If using bootstrap or pkgsrc on a non-NetBSD system, use the pkgsrc bmake
1753: command instead of "make" in the examples in this guide.
1754:
1755: For example, type
1756:
1757: % cd misc/figlet
1758: % make
1759:
1760:
1761: at the shell prompt to build the various components of the package.
1762:
1763: The next stage is to actually install the newly compiled program onto your
1764: system. Do this by entering:
1765:
1766: % make install
1767:
1768:
1769: while you are still in the directory for whatever package you are installing.
1770:
1771: Installing the package on your system may require you to be root. However,
1772: pkgsrc has a just-in-time-su feature, which allows you to only become root for
1773: the actual installation step.
1774:
1775: That's it, the software should now be installed and setup for use. You can now
1776: enter:
1777:
1778: % make clean
1779:
1780:
1781: to remove the compiled files in the work directory, as you shouldn't need them
1782: any more. If other packages were also added to your system (dependencies) to
1783: allow your program to compile, you can tidy these up also with the command:
1784:
1785: % make clean-depends
1786:
1787:
1788: Taking the figlet utility as an example, we can install it on our system by
1789: building as shown in Appendix B, Build logs.
1790:
1791: The program is installed under the default root of the packages tree - /usr/
1792: pkg. Should this not conform to your tastes, set the LOCALBASE variable in your
1793: environment, and it will use that value as the root of your packages tree. So,
1794: to use /usr/local, set LOCALBASE=/usr/local in your environment. Please note
1795: that you should use a directory which is dedicated to packages and not shared
1796: with other programs (i.e., do not try and use LOCALBASE=/usr). Also, you should
1797: not try to add any of your own files or directories (such as src/, obj/, or
1798: pkgsrc/) below the LOCALBASE tree. This is to prevent possible conflicts
1799: between programs and other files installed by the package system and whatever
1800: else may have been installed there.
1801:
1.4 rillig 1802: Some packages look in mk.conf to alter some configuration options at build
1.1 dsieger 1803: time. Have a look at pkgsrc/mk/defaults/mk.conf to get an overview of what will
1804: be set there by default. Environment variables such as LOCALBASE can be set in
1.4 rillig 1805: mk.conf to save having to remember to set them each time you want to use
1.1 dsieger 1806: pkgsrc.
1807:
1808: Occasionally, people want to "look under the covers" to see what is going on
1809: when a package is building or being installed. This may be for debugging
1810: purposes, or out of simple curiosity. A number of utility values have been
1811: added to help with this.
1812:
1813: 1. If you invoke the make(1) command with PKG_DEBUG_LEVEL=2, then a huge
1814: amount of information will be displayed. For example,
1815:
1816: make patch PKG_DEBUG_LEVEL=2
1817:
1.25 wiz 1818: will show all the commands that are invoked, up to and including the "patch
1819: " stage.
1.1 dsieger 1820:
1821: 2. If you want to know the value of a certain make(1) definition, then the
1822: VARNAME definition should be used, in conjunction with the show-var target.
1823: e.g. to show the expansion of the make(1) variable LOCALBASE:
1824:
1825: % make show-var VARNAME=LOCALBASE
1826: /usr/pkg
1827: %
1828:
1829:
1830: If you want to install a binary package that you've either created yourself
1831: (see next section), that you put into pkgsrc/packages manually or that is
1832: located on a remote FTP server, you can use the "bin-install" target. This
1833: target will install a binary package - if available - via pkg_add(1), else do a
1834: make package. The list of remote FTP sites searched is kept in the variable
1835: BINPKG_SITES, which defaults to ftp.NetBSD.org. Any flags that should be added
1836: to pkg_add(1) can be put into BIN_INSTALL_FLAGS. See pkgsrc/mk/defaults/mk.conf
1837: for more details.
1838:
1839: A final word of warning: If you set up a system that has a non-standard setting
1840: for LOCALBASE, be sure to set that before any packages are installed, as you
1841: cannot use several directories for the same purpose. Doing so will result in
1842: pkgsrc not being able to properly detect your installed packages, and fail
1843: miserably. Note also that precompiled binary packages are usually built with
1844: the default LOCALBASE of /usr/pkg, and that you should not install any if you
1845: use a non-standard LOCALBASE.
1846:
1847: Chapter 5. Configuring pkgsrc
1848:
1849: Table of Contents
1850:
1851: 5.1. General configuration
1852: 5.2. Variables affecting the build process
1.9 rillig 1853: 5.3. Variables affecting the installation process
1.4 rillig 1854: 5.4. Selecting and configuring the compiler
1.1 dsieger 1855:
1.4 rillig 1856: 5.4.1. Selecting the compiler
1857: 5.4.2. Additional flags to the compiler (CFLAGS)
1858: 5.4.3. Additional flags to the linker (LDFLAGS)
1.1 dsieger 1859:
1.4 rillig 1860: 5.5. Developer/advanced settings
1861: 5.6. Selecting Build Options
1.1 dsieger 1862:
1863: The whole pkgsrc system is configured in a single file, usually called mk.conf.
1864: In which directory pkgsrc looks for that file depends on the installation. On
1865: NetBSD, when you use make(1) from the base system, it is in the directory /etc
1866: /. In all other cases the default location is ${PREFIX}/etc/, depending on
1867: where you told the bootstrap program to install the binary packages.
1868:
1869: During the bootstrap, an example configuration file is created. To use that,
1870: you have to create the directory ${PREFIX}/etc and copy the example file there.
1871:
1872: The format of the configuration file is that of the usual BSD-style Makefiles.
1873: The whole pkgsrc configuration is done by setting variables in this file. Note
1874: that you can define all kinds of variables, and no special error checking (for
1875: example for spelling mistakes) takes place, so you have to try it out to see if
1876: it works.
1877:
1878: 5.1. General configuration
1879:
1880: In this section, you can find some variables that apply to all pkgsrc packages.
1881: A complete list of the variables that can be configured by the user is
1882: available in mk/defaults/mk.conf, together with some comments that describe
1883: each variable's intent.
1884:
1885: * LOCALBASE: Where packages will be installed. The default is /usr/pkg. Do
1886: not mix binary packages with different LOCALBASEs!
1887:
1888: * CROSSBASE: Where "cross" category packages will be installed. The default
1889: is ${LOCALBASE}/cross.
1890:
1891: * X11BASE: Where X11 is installed on the system. The default is /usr/X11R6.
1892:
1893: * DISTDIR: Where to store the downloaded copies of the original source
1894: distributions used for building pkgsrc packages. The default is $
1895: {PKGSRCDIR}/distfiles.
1896:
1897: * PKG_DBDIR: Where the database about installed packages is stored. The
1898: default is /var/db/pkg.
1899:
1900: * MASTER_SITE_OVERRIDE: If set, override the packages' MASTER_SITES with this
1901: value.
1902:
1903: * MASTER_SITE_BACKUP: Backup location(s) for distribution files and patch
1904: files if not found locally or in ${MASTER_SITES} or ${PATCH_SITES}
1.26 spz 1905: respectively. The defaults are ftp://ftp.NetBSD.org/pub/pkgsrc/distfiles/$
1906: {DIST_SUBDIR}/ and ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/$
1.1 dsieger 1907: {DIST_SUBDIR}/.
1908:
1909: * BINPKG_SITES: List of sites carrying binary pkgs. rel and arch are replaced
1910: with OS release ("2.0", etc.) and architecture ("mipsel", etc.).
1911:
1.23 jakllsch 1912: * ACCEPTABLE_LICENSES: List of acceptable licenses. License names are
1913: case-sensitive. Whenever you try to build a package whose license is not in
1914: this list, you will get an error message. If the license condition is
1915: simple enough, the error message will include specific instructions on how
1916: to change this variable.
1.1 dsieger 1917:
1918: 5.2. Variables affecting the build process
1919:
1920: XXX
1921:
1922: * PACKAGES: The top level directory for the binary packages. The default is $
1923: {PKGSRCDIR}/packages.
1924:
1925: * WRKOBJDIR: The top level directory where, if defined, the separate working
1926: directories will get created, and symbolically linked to from ${WRKDIR}
1927: (see below). This is useful for building packages on several architectures,
1928: then ${PKGSRCDIR} can be NFS-mounted while ${WRKOBJDIR} is local to every
1929: architecture. (It should be noted that PKGSRCDIR should not be set by the
1930: user ? it is an internal definition which refers to the root of the pkgsrc
1931: tree. It is possible to have many pkgsrc tree instances.)
1932:
1933: * LOCALPATCHES: Directory for local patches that aren't part of pkgsrc. See
1.6 rillig 1934: Section 11.3, "patches/*" for more information.
1.1 dsieger 1935:
1936: * PKGMAKECONF: Location of the mk.conf file used by a package's BSD-style
1937: Makefile. If this is not set, MAKECONF is set to /dev/null to avoid picking
1938: up settings used by builds in /usr/src.
1939:
1940: * DEPENDS_TARGET: By default, dependencies are only installed, and no binary
1.66 asau 1941: package is created for them. You can set this variable to package-install
1942: to automatically create binary packages after installing dependencies.
1.1 dsieger 1943:
1.9 rillig 1944: 5.3. Variables affecting the installation process
1.1 dsieger 1945:
1.25 wiz 1946: Most packages support installation into a subdirectory of WRKDIR. This allows a
1947: package to be built, before the actual filesystem is touched. DESTDIR support
1948: exists in two variations:
1.4 rillig 1949:
1950: * Basic DESTDIR support means that the package installation and packaging is
1951: still run as root.
1952:
1953: * Full DESTDIR support can run the complete build, installation and packaging
1954: as normal user. Root privileges are only needed to add packages.
1955:
1.25 wiz 1956: DESTDIR support is now the default. To switch back to non-DESTDIR, you can set
1957: USE_DESTDIR=no; this setting will be deprecated though, so it's preferable to
1958: convert a package to DESTDIR instead.
1.4 rillig 1959:
1960: With basic DESTDIR support, make clean needs to be run as root.
1961:
1.17 imil 1962: Considering the foo/bar package, DESTDIR full support can be tested using the
1963: following commands
1964:
1965: $ id
1966: uid=1000(myusername) gid=100(users) groups=100(users),0(wheel)
1967: $ mkdir $HOME/packages
1968: $ cd $PKGSRCDIR/foo/bar
1969:
1970: Verify DESTDIR full support, no root privileges should be needed
1971:
1.66 asau 1972: $ make stage-install
1.17 imil 1973:
1974: Create a package without root privileges
1975:
1.66 asau 1976: $ make PACKAGES=$HOME/packages package
1.17 imil 1977:
1978: For the following command, you must be able to gain root privileges using su(1)
1979:
1.66 asau 1980: $ make PACKAGES=$HOME/packages install
1.17 imil 1981:
1982: Then, as a simple user
1983:
1984: $ make clean
1985:
1.4 rillig 1986: 5.4. Selecting and configuring the compiler
1987:
1988: 5.4.1. Selecting the compiler
1.1 dsieger 1989:
1990: By default, pkgsrc will use GCC to build packages. This may be overridden by
1991: setting the following variables in /etc/mk.conf:
1992:
1993: PKGSRC_COMPILER:
1994:
1995: This is a list of values specifying the chain of compilers to invoke when
1996: building packages. Valid values are:
1997:
1.66 asau 1998: + ccc: Compaq C Compilers (Tru64)
1999:
2000: + ccache: compiler cache (chainable)
2001:
2002: + clang: Clang C and Objective-C compiler
2003:
1.42 asau 2004: + distcc: distributed C/C++ (chainable)
1.1 dsieger 2005:
1.66 asau 2006: + f2c: Fortran 77 to C compiler (chainable)
2007:
2008: + icc: Intel C++ Compiler (Linux)
2009:
2010: + ido: SGI IRIS Development Option cc (IRIX 5)
1.1 dsieger 2011:
1.42 asau 2012: + gcc: GNU C/C++ Compiler
1.1 dsieger 2013:
1.66 asau 2014: + hp: HP-UX C/aC++ compilers
2015:
1.42 asau 2016: + mipspro: Silicon Graphics, Inc. MIPSpro (n32/n64)
1.1 dsieger 2017:
1.66 asau 2018: + mipspro-ucode: Silicon Graphics, Inc. MIPSpro (o32)
1.1 dsieger 2019:
1.42 asau 2020: + sunpro: Sun Microsystems, Inc. WorkShip/Forte/Sun ONE Studio
1.1 dsieger 2021:
1.66 asau 2022: + xlc: IBM's XL C/C++ compiler suite (Darwin/MacOSX)
2023:
1.1 dsieger 2024: The default is "gcc". You can use ccache and/or distcc with an appropriate
2025: PKGSRC_COMPILER setting, e.g. "ccache gcc". This variable should always be
2026: terminated with a value for a real compiler. Note that only one real
2027: compiler should be listed (e.g. "sunpro gcc" is not allowed).
2028:
2029: GCC_REQD:
2030:
2031: This specifies the minimum version of GCC to use when building packages. If
2032: the system GCC doesn't satisfy this requirement, then pkgsrc will build and
2033: install one of the GCC packages to use instead.
2034:
1.4 rillig 2035: 5.4.2. Additional flags to the compiler (CFLAGS)
1.1 dsieger 2036:
2037: If you wish to set the CFLAGS variable, please make sure to use the += operator
2038: instead of the = operator:
2039:
2040: CFLAGS+= -your -flags
2041:
2042: Using CFLAGS= (i.e. without the "+") may lead to problems with packages that
1.16 jnemeth 2043: need to add their own flags. You may want to take a look at the devel/cpuflags
1.24 wiz 2044: package if you're interested in optimization specifically for the current CPU.
1.1 dsieger 2045:
1.4 rillig 2046: 5.4.3. Additional flags to the linker (LDFLAGS)
1.1 dsieger 2047:
2048: If you want to pass flags to the linker, both in the configure step and the
2049: build step, you can do this in two ways. Either set LDFLAGS or LIBS. The
2050: difference between the two is that LIBS will be appended to the command line,
2051: while LDFLAGS come earlier. LDFLAGS is pre-loaded with rpath settings for ELF
2052: machines depending on the setting of USE_IMAKE or the inclusion of mk/
2053: x11.buildlink3.mk. As with CFLAGS, if you do not wish to override these
2054: settings, use the += operator:
2055:
2056: LDFLAGS+= -your -linkerflags
2057:
1.4 rillig 2058: 5.5. Developer/advanced settings
1.1 dsieger 2059:
2060: XXX
2061:
2062: * PKG_DEVELOPER: Run some sanity checks that package developers want:
2063:
1.42 asau 2064: + make sure patches apply with zero fuzz
1.1 dsieger 2065:
1.42 asau 2066: + run check-shlibs to see that all binaries will find their shared libs.
1.1 dsieger 2067:
2068: * PKG_DEBUG_LEVEL: The level of debugging output which is displayed whilst
2069: making and installing the package. The default value for this is 0, which
2070: will not display the commands as they are executed (normal, default, quiet
2071: operation); the value 1 will display all shell commands before their
2072: invocation, and the value 2 will display both the shell commands before
2073: their invocation, and their actual execution progress with set -x will be
2074: displayed.
2075:
1.4 rillig 2076: 5.6. Selecting Build Options
1.1 dsieger 2077:
2078: Some packages have build time options, usually to select between different
2079: dependencies, enable optional support for big dependencies or enable
2080: experimental features.
2081:
2082: To see which options, if any, a package supports, and which options are
2083: mutually exclusive, run make show-options, for example:
2084:
2085: The following options are supported by this package:
2086: ssl Enable SSL support.
2087: Exactly one of the following gecko options is required:
2088: firefox Use firefox as gecko rendering engine.
2089: mozilla Use mozilla as gecko rendering engine.
2090: At most one of the following database options may be selected:
2091: mysql Enable support for MySQL database.
2092: pgsql Enable support for PostgreSQL database.
2093:
2094: These options are enabled by default: firefox
2095: These options are currently enabled: mozilla ssl
2096:
1.4 rillig 2097: The following variables can be defined in mk.conf to select which options to
2098: enable for a package: PKG_DEFAULT_OPTIONS, which can be used to select or
1.1 dsieger 2099: disable options for all packages that support them, and PKG_OPTIONS.pkgbase,
2100: which can be used to select or disable options specifically for package pkgbase
2101: . Options listed in these variables are selected, options preceded by "-" are
2102: disabled. A few examples:
2103:
1.4 rillig 2104: $ grep "PKG.*OPTION" mk.conf
1.1 dsieger 2105: PKG_DEFAULT_OPTIONS= -arts -dvdread -esound
2106: PKG_OPTIONS.kdebase= debug -sasl
2107: PKG_OPTIONS.apache= suexec
2108:
1.11 rillig 2109: It is important to note that options that were specifically suggested by the
1.19 snj 2110: package maintainer must be explicitly removed if you do not wish to include the
2111: option. If you are unsure you can view the current state with make show-options
2112: .
1.11 rillig 2113:
1.1 dsieger 2114: The following settings are consulted in the order given, and the last setting
2115: that selects or disables an option is used:
2116:
2117: 1. the default options as suggested by the package maintainer
2118:
2119: 2. the options implied by the settings of legacy variables (see below)
2120:
2121: 3. PKG_DEFAULT_OPTIONS
2122:
2123: 4. PKG_OPTIONS.pkgbase
2124:
2125: For groups of mutually exclusive options, the last option selected is used, all
2126: others are automatically disabled. If an option of the group is explicitly
2127: disabled, the previously selected option, if any, is used. It is an error if no
2128: option from a required group of options is selected, and building the package
2129: will fail.
2130:
2131: Before the options framework was introduced, build options were selected by
1.4 rillig 2132: setting a variable (often named USE_FOO) in mk.conf for each option. To ease
2133: transition to the options framework for the user, these legacy variables are
2134: converted to the appropriate options setting (PKG_OPTIONS.pkgbase)
2135: automatically. A warning is issued to prompt the user to update mk.conf to use
2136: the options framework directly. Support for the legacy variables will be
1.1 dsieger 2137: removed eventually.
2138:
2139: Chapter 6. Creating binary packages
2140:
2141: Table of Contents
2142:
2143: 6.1. Building a single binary package
2144: 6.2. Settings for creation of binary packages
2145:
2146: 6.1. Building a single binary package
2147:
2148: Once you have built and installed a package, you can create a binary package
2149: which can be installed on another system with pkg_add(1). This saves having to
2150: build the same package on a group of hosts and wasting CPU time. It also
2151: provides a simple means for others to install your package, should you
2152: distribute it.
2153:
2154: To create a binary package, change into the appropriate directory in pkgsrc,
2155: and run make package:
2156:
2157: # cd misc/figlet
2158: # make package
2159:
2160:
2161: This will build and install your package (if not already done), and then build
2162: a binary package from what was installed. You can then use the pkg_* tools to
2163: manipulate it. Binary packages are created by default in /usr/pkgsrc/packages,
2164: in the form of a gzipped tar file. See Section B.2, "Packaging figlet" for a
2165: continuation of the above misc/figlet example.
2166:
1.6 rillig 2167: See Chapter 21, Submitting and Committing for information on how to submit such
1.1 dsieger 2168: a binary package.
2169:
2170: 6.2. Settings for creation of binary packages
2171:
1.6 rillig 2172: See Section 17.17, "Other helpful targets".
2173:
2174: Chapter 7. Creating binary packages for everything in pkgsrc (bulk builds)
2175:
2176: Table of Contents
2177:
1.71 wiz 2178: 7.1. Preparations
2179: 7.2. Running a pbulk-style bulk build
1.6 rillig 2180:
1.71 wiz 2181: 7.2.1. Configuration
1.6 rillig 2182:
1.71 wiz 2183: 7.3. Requirements of a full bulk build
1.66 asau 2184: 7.4. Creating a multiple CD-ROM packages collection
1.6 rillig 2185:
1.66 asau 2186: 7.4.1. Example of cdpack
1.6 rillig 2187:
1.71 wiz 2188: For a number of reasons you may want to build binary packages for a large
2189: selected set of packages in pkgsrc or even for all pkgsrc packages. For
2190: instance, when you have multiple machines that should run the same software, it
2191: is wasted time if they all build their packages themselves from source. Or you
2192: may want to build a list of packages you want and check them before deploying
2193: onto production system. There is a way of getting a set of binary packages: The
2194: bulk build system, or pbulk ("p" stands for "parallel). This chapter describes
2195: how to set it up so that the packages are most likely to be usable later.
2196:
2197: 7.1. Preparations
2198:
2199: First of all, you have to decide whether you build all packages or a limited
2200: set of them. Full bulk builds usually consume a lot more resources, both space
2201: and time, than builds for some practical sets of packages. There exists a
2202: number of particularly heavy packages that are not actually interesting to a
2203: wide audience. For a limited bulk builds you need to make a list of packages
2204: you want to build. Note, that all their dependencies will be built, so you
2205: don't need to track them manually.
2206:
2207: During bulk builds various packages are installed and deinstalled in /usr/pkg
2208: (or whatever LOCALBASE is), so make sure that you don't need any package during
2209: the builds. Essentially, you should provide fresh system, either a chroot
2210: environment or something even more restrictive, depending on what the operating
2211: system provides, or dedicate the whole physical machine. As a useful side
2212: effect this makes sure that bulk builds cannot break anything in your system.
2213: There have been numerous cases where certain packages tried to install files
2214: outside the LOCALBASE or wanted to edit some files in /etc.
1.6 rillig 2215:
1.71 wiz 2216: 7.2. Running a pbulk-style bulk build
1.6 rillig 2217:
1.15 rillig 2218: Running a pbulk-style bulk build works roughly as follows:
2219:
2220: * First, build the pbulk infrastructure in a fresh pkgsrc location.
2221:
2222: * Then, build each of the packages from a clean installation directory using
2223: the infrastructure.
2224:
1.71 wiz 2225: 7.2.1. Configuration
1.6 rillig 2226:
1.68 asau 2227: To simplify configuration we provide helper script mk/pbulk/pbulk.sh.
1.6 rillig 2228:
1.68 asau 2229: In order to use it, prepare a clear system (real one, chroot environment, jail,
2230: zone, virtual machine). Configure network access to fetch distribution files.
2231: Create user with name "pbulk".
2232:
2233: Fetch and extract pkgsrc. Use a command like one of these:
2234:
1.72 wiz 2235: # (cd /usr && ftp -o - http://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc.tar.gz | tar -zxf-)
2236: # (cd /usr && fetch -o - http://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc.tar.gz | tar -zxf-)
2237: # (cd /usr && cvs -Q -z3 -d anoncvs@anoncvs.NetBSD.org:/cvsroot get -P pkgsrc)
1.68 asau 2238:
2239: Or any other way that fits (e.g., curl, wget).
2240:
2241: Deploy and configure pbulk tools, e.g.:
2242:
2243: # sh pbulk.sh -n # native (NetBSD)
2244: # sh pbulk.sh -n -c mk.conf.frag # native, apply settings from given mk.conf fragment
2245: # sh pbulk.sh -nlc mk.conf.frag # native, apply settings, configure for limited build
2246:
2247: Note
2248:
2249: mk.conf.frag is a fragment of mk.conf that contains settings you want to apply
2250: to packages you build. For instance,
2251:
2252: PKG_DEVELOPER= yes # perform more checks
2253: X11_TYPE= modular # use pkgsrc X11
2254: SKIP_LICENSE_CHECK= yes # accept all licences (useful when building all packages)
2255:
2256: If configured for limited list, replace the list in /usr/pbulk/etc/pbulk.list
2257: with your list of packages one per line without empty lines or comments. E.g.:
2258:
2259: www/firefox
2260: mail/thunderbird
2261: misc/libreoffice4
2262:
1.69 asau 2263: At this point you can also review configuration in /usr/pbulk/etc and make
2264: final amendments, if wanted.
2265:
1.68 asau 2266: Start it:
2267:
2268: # /usr/pbulk/bin/bulkbuild
2269:
2270: After it finishes, you'll have /mnt filled with distribution files, binary
2271: packages, and reports, plain text summary in /mnt/bulklog/meta/report.txt
2272:
2273: Note
2274:
2275: The pbulk.sh script does not cover all possible use cases. While being ready to
2276: run, it serves as a good starting point to understand and build more complex
2277: setups. The script is kept small enough for better understanding.
2278:
2279: Note
2280:
2281: The pbulk.sh script supports running unprivileged bulk build and helps
2282: configuring distributed bulk builds.
1.15 rillig 2283:
1.71 wiz 2284: 7.3. Requirements of a full bulk build
2285:
2286: A complete bulk build requires lots of disk space. Some of the disk space can
2287: be read-only, some other must be writable. Some can be on remote filesystems
2288: (such as NFS) and some should be local. Some can be temporary filesystems,
2289: others must survive a sudden reboot.
2290:
2291: * 40 GB for the distfiles (read-write, remote, temporary)
2292:
2293: * 30 GB for the binary packages (read-write, remote, permanent)
2294:
2295: * 1 GB for the pkgsrc tree (read-only, remote, permanent)
2296:
2297: * 5 GB for LOCALBASE (read-write, local, temporary)
2298:
2299: * 10 GB for the log files (read-write, remote, permanent)
2300:
2301: * 5 GB for temporary files (read-write, local, temporary)
2302:
1.66 asau 2303: 7.4. Creating a multiple CD-ROM packages collection
1.1 dsieger 2304:
2305: After your pkgsrc bulk-build has completed, you may wish to create a CD-ROM set
2306: of the resulting binary packages to assist in installing packages on other
2307: machines. The pkgtools/cdpack package provides a simple tool for creating the
2308: ISO 9660 images. cdpack arranges the packages on the CD-ROMs in a way that
2309: keeps all the dependencies for a given package on the same CD as that package.
2310:
1.66 asau 2311: 7.4.1. Example of cdpack
1.1 dsieger 2312:
2313: Complete documentation for cdpack is found in the cdpack(1) man page. The
2314: following short example assumes that the binary packages are left in /usr/
2315: pkgsrc/packages/All and that sufficient disk space exists in /u2 to hold the
2316: ISO 9660 images.
2317:
2318: # mkdir /u2/images
2319: # pkg_add /usr/pkgsrc/packages/All/cdpack
2320: # cdpack /usr/pkgsrc/packages/All /u2/images
2321:
2322:
2323: If you wish to include a common set of files (COPYRIGHT, README, etc.) on each
2324: CD in the collection, then you need to create a directory which contains these
2325: files. e.g.
2326:
2327: # mkdir /tmp/common
2328: # echo "This is a README" > /tmp/common/README
2329: # echo "Another file" > /tmp/common/COPYING
2330: # mkdir /tmp/common/bin
2331: # echo "#!/bin/sh" > /tmp/common/bin/myscript
2332: # echo "echo Hello world" >> /tmp/common/bin/myscript
2333: # chmod 755 /tmp/common/bin/myscript
2334:
2335:
2336: Now create the images:
2337:
2338: # cdpack -x /tmp/common /usr/pkgsrc/packages/All /u2/images
2339:
2340: Each image will contain README, COPYING, and bin/myscript in their root
2341: directories.
2342:
1.6 rillig 2343: Chapter 8. Directory layout of the installed files
1.1 dsieger 2344:
2345: Table of Contents
2346:
1.6 rillig 2347: 8.1. File system layout in ${LOCALBASE}
2348: 8.2. File system layout in ${VARBASE}
1.1 dsieger 2349:
2350: The files that are installed by pkgsrc are organized in a way that is similar
2351: to what you find in the /usr directory of the base system. But some details are
2352: different. This is because pkgsrc initially came from FreeBSD and had adopted
2353: its file system hierarchy. Later it was largely influenced by NetBSD. But no
2354: matter which operating system you are using pkgsrc with, you can expect the
2355: same layout for pkgsrc.
2356:
2357: There are mainly four root directories for pkgsrc, which are all configurable
2358: in the bootstrap/bootstrap script. When pkgsrc has been installed as root, the
2359: default locations are:
2360:
2361: LOCALBASE= /usr/pkg
2362: PKG_SYSCONFBASE= /usr/pkg/etc
2363: VARBASE= /var
2364: PKG_DBDIR= /var/db/pkg
2365:
2366: In unprivileged mode (when pkgsrc has been installed as any other user), the
2367: default locations are:
2368:
2369: LOCALBASE= ${HOME}/pkg
2370: PKG_SYSCONFBASE= ${HOME}/pkg/etc
2371: VARBASE= ${HOME}/pkg/var
2372: PKG_DBDIR= ${HOME}/pkg/var/db/pkg
2373:
2374: What these four directories are for, and what they look like is explained
2375: below.
2376:
1.25 wiz 2377: * LOCALBASE corresponds to the /usr directory in the base system. It is the "
2378: main" directory where the files are installed and contains the well-known
1.1 dsieger 2379: subdirectories like bin, include, lib, share and sbin.
2380:
2381: * VARBASE corresponds to /var in the base system. Some programs (especially
2382: games, network daemons) need write access to it during normal operation.
2383:
2384: * PKG_SYSCONFDIR corresponds to /etc in the base system. It contains
2385: configuration files of the packages, as well as pkgsrc's mk.conf itself.
2386:
1.6 rillig 2387: 8.1. File system layout in ${LOCALBASE}
1.1 dsieger 2388:
2389: The following directories exist in a typical pkgsrc installation in $
2390: {LOCALBASE}.
2391:
2392: bin
2393:
2394: Contains executable programs that are intended to be directly used by the
2395: end user.
2396:
2397: emul
2398:
2399: Contains files for the emulation layers of various other operating systems,
2400: especially for NetBSD.
2401:
2402: etc (the usual location of ${PKG_SYSCONFDIR})
2403:
2404: Contains the configuration files.
2405:
2406: include
2407:
2408: Contains headers for the C and C++ programming languages.
2409:
2410: info
2411:
2412: Contains GNU info files of various packages.
2413:
2414: lib
2415:
2416: Contains shared and static libraries.
2417:
2418: libdata
2419:
2420: Contains data files that don't change after installation. Other data files
2421: belong into ${VARBASE}.
2422:
2423: libexec
2424:
2425: Contains programs that are not intended to be used by end users, such as
2426: helper programs or network daemons.
2427:
2428: libexec/cgi-bin
2429:
2430: Contains programs that are intended to be executed as CGI scripts by a web
2431: server.
2432:
2433: man (the usual value of ${PKGMANDIR})
2434:
2435: Contains brief documentation in form of manual pages.
2436:
2437: sbin
2438:
2439: Contains programs that are intended to be used only by the super-user.
2440:
2441: share
2442:
2443: Contains platform-independent data files that don't change after
2444: installation.
2445:
2446: share/doc
2447:
2448: Contains documentation files provided by the packages.
2449:
2450: share/examples
2451:
2452: Contains example files provided by the packages. Among others, the original
2453: configuration files are saved here and copied to ${PKG_SYSCONFDIR} during
2454: installation.
2455:
2456: share/examples/rc.d
2457:
2458: Contains the original files for rc.d scripts.
2459:
2460: var (the usual location of ${VARBASE})
2461:
2462: Contains files that may be modified after installation.
2463:
1.6 rillig 2464: 8.2. File system layout in ${VARBASE}
1.1 dsieger 2465:
2466: db/pkg (the usual location of ${PKG_DBDIR})
2467:
2468: Contains information about the currently installed packages.
2469:
2470: games
2471:
2472: Contains highscore files.
2473:
2474: log
2475:
2476: Contains log files.
2477:
2478: run
2479:
2480: Contains informational files about daemons that are currently running.
2481:
1.6 rillig 2482: Chapter 9. Frequently Asked Questions
1.1 dsieger 2483:
2484: Table of Contents
2485:
1.6 rillig 2486: 9.1. Are there any mailing lists for pkg-related discussion?
2487: 9.2. Where's the pkgviews documentation?
2488: 9.3. Utilities for package management (pkgtools)
2489: 9.4. How to use pkgsrc as non-root
2490: 9.5. How to resume transfers when fetching distfiles?
2491: 9.6. How can I install/use modular X.org from pkgsrc?
2492: 9.7. How to fetch files from behind a firewall
1.65 wiz 2493: 9.8. How to fetch files from HTTPS sites
2494: 9.9. How do I tell make fetch to do passive FTP?
2495: 9.10. How to fetch all distfiles at once
2496: 9.11. What does "Don't know how to make /usr/share/tmac/tmac.andoc" mean?
2497: 9.12. What does "Could not find bsd.own.mk" mean?
2498: 9.13. Using 'sudo' with pkgsrc
2499: 9.14. How do I change the location of configuration files?
2500: 9.15. Automated security checks
2501: 9.16. Why do some packages ignore my CFLAGS?
2502: 9.17. A package does not build. What shall I do?
2503: 9.18. What does "Makefile appears to contain unresolved cvs/rcs/??? merge
1.24 wiz 2504: conflicts" mean?
1.1 dsieger 2505:
2506: This section contains hints, tips & tricks on special things in pkgsrc that we
2507: didn't find a better place for in the previous chapters, and it contains items
2508: for both pkgsrc users and developers.
2509:
1.6 rillig 2510: 9.1. Are there any mailing lists for pkg-related discussion?
1.1 dsieger 2511:
2512: The following mailing lists may be of interest to pkgsrc users:
2513:
2514: * pkgsrc-users: This is a general purpose list for most issues regarding
2515: pkgsrc, regardless of platform, e.g. soliciting user help for pkgsrc
2516: configuration, unexpected build failures, using particular packages,
2517: upgrading pkgsrc installations, questions regarding the pkgsrc release
2518: branches, etc. General announcements or proposals for changes that impact
2519: the pkgsrc user community, e.g. major infrastructure changes, new features,
2520: package removals, etc., may also be posted.
2521:
2522: * pkgsrc-bulk: A list where the results of pkgsrc bulk builds are sent and
2523: discussed.
2524:
2525: * pkgsrc-changes: This list is for those who are interested in getting a
2526: commit message for every change committed to pkgsrc. It is also available
2527: in digest form, meaning one daily message containing all commit messages
2528: for changes to the package source tree in that 24 hour period.
2529:
2530: To subscribe, do:
2531:
2532: % echo subscribe listname | mail majordomo@NetBSD.org
2533:
2534: Archives for all these mailing lists are available from http://
2535: mail-index.NetBSD.org/.
2536:
1.6 rillig 2537: 9.2. Where's the pkgviews documentation?
1.1 dsieger 2538:
2539: Pkgviews is tightly integrated with buildlink. You can find a pkgviews User's
2540: guide in pkgsrc/mk/buildlink3/PKGVIEWS_UG.
2541:
1.6 rillig 2542: 9.3. Utilities for package management (pkgtools)
1.1 dsieger 2543:
2544: The directory pkgsrc/pkgtools contains a number of useful utilities for both
2545: users and developers of pkgsrc. This section attempts only to make the reader
2546: aware of the utilities and when they might be useful, and not to duplicate the
2547: documentation that comes with each package.
2548:
2549: Utilities used by pkgsrc (automatically installed when needed):
2550:
2551: * pkgtools/x11-links: Symlinks for use by buildlink.
2552:
2553: OS tool augmentation (automatically installed when needed):
2554:
2555: * pkgtools/digest: Calculates various kinds of checksums (including SHA1).
2556:
2557: * pkgtools/libnbcompat: Compatibility library for pkgsrc tools.
2558:
2559: * pkgtools/mtree: Installed on non-BSD systems due to lack of native mtree.
2560:
2561: * pkgtools/pkg_install: Up-to-date replacement for /usr/sbin/pkg_install, or
2562: for use on operating systems where pkg_install is not present.
2563:
2564: Utilities used by pkgsrc (not automatically installed):
2565:
2566: * pkgtools/pkg_tarup: Create a binary package from an already-installed
2567: package. Used by make replace to save the old package.
2568:
2569: * pkgtools/dfdisk: Adds extra functionality to pkgsrc, allowing it to fetch
2570: distfiles from multiple locations. It currently supports the following
2571: methods: multiple CD-ROMs and network FTP/HTTP connections.
2572:
2573: * devel/cpuflags: Determine the best compiler flags to optimise code for your
1.24 wiz 2574: current CPU and compiler.
1.1 dsieger 2575:
2576: Utilities for keeping track of installed packages, being up to date, etc:
2577:
1.65 wiz 2578: * pkgtools/pkgin: A package update tool similar to apt(1). Download, install,
2579: and upgrade binary packages easily.
2580:
1.1 dsieger 2581: * pkgtools/pkg_chk: Reports on packages whose installed versions do not match
2582: the latest pkgsrc entries.
2583:
2584: * pkgtools/pkgdep: Makes dependency graphs of packages, to aid in choosing a
2585: strategy for updating.
2586:
2587: * pkgtools/pkgdepgraph: Makes graphs from the output of pkgtools/pkgdep (uses
2588: graphviz).
2589:
1.12 weinem 2590: * pkgtools/pkglint: The pkglint(1) program checks a pkgsrc entry for errors.
2591:
2592: * pkgtools/lintpkgsrc: The lintpkgsrc(1) program does various checks on the
2593: complete pkgsrc system.
1.1 dsieger 2594:
2595: * pkgtools/pkgsurvey: Report what packages you have installed.
2596:
2597: Utilities for people maintaining or creating individual packages:
2598:
2599: * pkgtools/pkgdiff: Automate making and maintaining patches for a package
2600: (includes pkgdiff, pkgvi, mkpatches, etc.).
2601:
1.65 wiz 2602: * pkgtools/url2pkg: Aids in converting to pkgsrc.
1.1 dsieger 2603:
2604: Utilities for people maintaining pkgsrc (or: more obscure pkg utilities)
2605:
2606: * pkgtools/pkg_comp: Build packages in a chrooted area.
2607:
2608: * pkgtools/libkver: Spoof kernel version for chrooted cross builds.
2609:
1.6 rillig 2610: 9.4. How to use pkgsrc as non-root
1.1 dsieger 2611:
2612: If you want to use pkgsrc as non-root user, you can set some variables to make
2613: pkgsrc work under these conditions. At the very least, you need to set
2614: UNPRIVILEGED to "yes"; this will turn on unprivileged mode and set multiple
2615: related variables to allow installation of packages as non-root.
2616:
2617: In case the defaults are not enough, you may want to tune some other variables
2618: used. For example, if the automatic user/group detection leads to incorrect
2619: values (or not the ones you would like to use), you can change them by setting
2620: UNPRIVILEGED_USER and UNPRIVILEGED_GROUP respectively.
2621:
2622: As regards bootstrapping, please note that the bootstrap script will ease
2623: non-root configuration when given the "--ignore-user-check" flag, as it will
2624: choose and use multiple default directories under ~/pkg as the installation
2625: targets. These directories can be overridden by the "--prefix" flag provided by
2626: the script, as well as some others that allow finer tuning of the tree layout.
2627:
1.6 rillig 2628: 9.5. How to resume transfers when fetching distfiles?
1.1 dsieger 2629:
2630: By default, resuming transfers in pkgsrc is disabled, but you can enable this
1.4 rillig 2631: feature by adding the option PKG_RESUME_TRANSFERS=YES into mk.conf. If, during
2632: a fetch step, an incomplete distfile is found, pkgsrc will try to resume it.
1.1 dsieger 2633:
1.61 wiz 2634: You can also use a different program than the platform default program by
2635: changing the FETCH_USING variable. You can specify the program by using of ftp,
2636: fetch, wget or curl. Alternatively, fetching can be disabled by using the value
2637: manual. A value of custom disables the system defaults and dependency tracking
2638: for the fetch program. In that case you have to provide FETCH_CMD,
2639: FETCH_BEFORE_ARGS, FETCH_RESUME_ARGS, FETCH_OUTPUT_ARGS, FETCH_AFTER_ARGS.
1.1 dsieger 2640:
1.16 jnemeth 2641: For example, if you want to use wget to download, you'll have to use something
2642: like:
1.1 dsieger 2643:
1.16 jnemeth 2644: FETCH_USING= wget
1.1 dsieger 2645:
1.6 rillig 2646: 9.6. How can I install/use modular X.org from pkgsrc?
1.1 dsieger 2647:
1.4 rillig 2648: If you want to use modular X.org from pkgsrc instead of your system's own X11
2649: (/usr/X11R6, /usr/openwin, ...) you will have to add the following line into
1.1 dsieger 2650: mk.conf:
2651:
1.4 rillig 2652: X11_TYPE=modular
1.1 dsieger 2653:
2654: Note
2655:
1.4 rillig 2656: The DragonFly operating system defaults to using modular X.org from pkgsrc.
1.1 dsieger 2657:
1.6 rillig 2658: 9.7. How to fetch files from behind a firewall
1.1 dsieger 2659:
2660: If you are sitting behind a firewall which does not allow direct connections to
2661: Internet hosts (i.e. non-NAT), you may specify the relevant proxy hosts. This
2662: is done using an environment variable in the form of a URL, e.g. in Amdahl, the
2663: machine "orpheus.amdahl.com" is one of the firewalls, and it uses port 80 as
2664: the proxy port number. So the proxy environment variables are:
2665:
2666: ftp_proxy=ftp://orpheus.amdahl.com:80/
2667: http_proxy=http://orpheus.amdahl.com:80/
2668:
1.65 wiz 2669: 9.8. How to fetch files from HTTPS sites
2670:
2671: Some fetch tools are not prepared to support HTTPS by default (for example, the
2672: one in NetBSD 6.0), or the one installed by the pkgsrc bootstrap (to avoid an
2673: openssl dependency that low in the dependency graph).
2674:
2675: Usually you won't notice, because distribution files are mirrored weekly to "
2676: ftp.NetBSD.org", but that might not be often enough if you are following
2677: pkgsrc-current. In that case, set FETCH_USING in your mk.conf file to "curl" or
2678: "wget", which are both compiled with HTTPS support by default. Of course, these
2679: tools need to be installed before you can use them this way.
2680:
2681: 9.9. How do I tell make fetch to do passive FTP?
1.1 dsieger 2682:
2683: This depends on which utility is used to retrieve distfiles. From bsd.pkg.mk,
2684: FETCH_CMD is assigned the first available command from the following list:
2685:
2686: * ${LOCALBASE}/bin/ftp
2687:
2688: * /usr/bin/ftp
2689:
2690: On a default NetBSD installation, this will be /usr/bin/ftp, which
2691: automatically tries passive connections first, and falls back to active
2692: connections if the server refuses to do passive. For the other tools, add the
1.4 rillig 2693: following to your mk.conf file: PASSIVE_FETCH=1.
1.1 dsieger 2694:
2695: Having that option present will prevent /usr/bin/ftp from falling back to
2696: active transfers.
2697:
1.65 wiz 2698: 9.10. How to fetch all distfiles at once
1.1 dsieger 2699:
2700: You would like to download all the distfiles in a single batch from work or
2701: university, where you can't run a make fetch. There is an archive of distfiles
2702: on ftp.NetBSD.org, but downloading the entire directory may not be appropriate.
2703:
2704: The answer here is to do a make fetch-list in /usr/pkgsrc or one of its
2705: subdirectories, carry the resulting list to your machine at work/school and use
2706: it there. If you don't have a NetBSD-compatible ftp(1) (like tnftp) at work,
2707: don't forget to set FETCH_CMD to something that fetches a URL:
2708:
2709: At home:
2710:
2711: % cd /usr/pkgsrc
2712: % make fetch-list FETCH_CMD=wget DISTDIR=/tmp/distfiles >/tmp/fetch.sh
2713: % scp /tmp/fetch.sh work:/tmp
2714:
2715: At work:
2716:
2717: % sh /tmp/fetch.sh
2718:
2719: then tar up /tmp/distfiles and take it home.
2720:
2721: If you have a machine running NetBSD, and you want to get all distfiles (even
2722: ones that aren't for your machine architecture), you can do so by using the
2723: above-mentioned make fetch-list approach, or fetch the distfiles directly by
2724: running:
2725:
2726: % make mirror-distfiles
2727:
2728: If you even decide to ignore NO_{SRC,BIN}_ON_{FTP,CDROM}, then you can get
2729: everything by running:
2730:
2731: % make fetch NO_SKIP=yes
2732:
1.65 wiz 2733: 9.11. What does "Don't know how to make /usr/share/tmac/tmac.andoc" mean?
1.1 dsieger 2734:
2735: When compiling the pkgtools/pkg_install package, you get the error from make
2736: that it doesn't know how to make /usr/share/tmac/tmac.andoc? This indicates
2737: that you don't have installed the "text" set (nroff, ...) from the NetBSD base
2738: distribution on your machine. It is recommended to do that to format man pages.
2739:
2740: In the case of the pkgtools/pkg_install package, you can get away with setting
1.4 rillig 2741: NOMAN=YES either in the environment or in mk.conf.
1.1 dsieger 2742:
1.65 wiz 2743: 9.12. What does "Could not find bsd.own.mk" mean?
1.1 dsieger 2744:
2745: You didn't install the compiler set, comp.tgz, when you installed your NetBSD
2746: machine. Please get and install it, by extracting it in /:
2747:
2748: # cd /
2749: # tar --unlink -zxvpf .../comp.tgz
2750:
2751: comp.tgz is part of every NetBSD release. Get the one that corresponds to your
2752: release (determine via uname -r).
2753:
1.65 wiz 2754: 9.13. Using 'sudo' with pkgsrc
1.1 dsieger 2755:
2756: When installing packages as non-root user and using the just-in-time su(1)
2757: feature of pkgsrc, it can become annoying to type in the root password for each
2758: required package installed. To avoid this, the sudo package can be used, which
2759: does password caching over a limited time. To use it, install sudo (either as
1.4 rillig 2760: binary package or from security/sudo) and then put the following into your
2761: mk.conf, somewhere after the definition of the LOCALBASE variable:
1.1 dsieger 2762:
2763: .if exists(${LOCALBASE}/bin/sudo)
2764: SU_CMD= ${LOCALBASE}/bin/sudo /bin/sh -c
2765: .endif
2766:
1.65 wiz 2767: 9.14. How do I change the location of configuration files?
1.1 dsieger 2768:
2769: As the system administrator, you can choose where configuration files are
2770: installed. The default settings make all these files go into ${PREFIX}/etc or
2771: some of its subdirectories; this may be suboptimal depending on your
2772: expectations (e.g., a read-only, NFS-exported PREFIX with a need of per-machine
2773: configuration of the provided packages).
2774:
2775: In order to change the defaults, you can modify the PKG_SYSCONFBASE variable
1.4 rillig 2776: (in mk.conf) to point to your preferred configuration directory; some common
2777: examples include /etc or /etc/pkg.
1.1 dsieger 2778:
2779: Furthermore, you can change this value on a per-package basis by setting the
2780: PKG_SYSCONFDIR.${PKG_SYSCONFVAR} variable. PKG_SYSCONFVAR's value usually
2781: matches the name of the package you would like to modify, that is, the contents
2782: of PKGBASE.
2783:
2784: Note that after changing these settings, you must rebuild and reinstall any
2785: affected packages.
2786:
1.65 wiz 2787: 9.15. Automated security checks
1.1 dsieger 2788:
2789: Please be aware that there can often be bugs in third-party software, and some
2790: of these bugs can leave a machine vulnerable to exploitation by attackers. In
2791: an effort to lessen the exposure, the NetBSD packages team maintains a database
2792: of known-exploits to packages which have at one time been included in pkgsrc.
2793: The database can be downloaded automatically, and a security audit of all
1.14 jmcneill 2794: packages installed on a system can take place. To do this, refer to the
2795: following two tools (installed as part of the pkgtools/pkg_install package):
1.1 dsieger 2796:
1.21 snj 2797: 1. pkg_admin fetch-pkg-vulnerabilities, an easy way to download a list of the
2798: security vulnerabilities information. This list is kept up to date by the
1.26 spz 2799: pkgsrc security team, and is distributed from the NetBSD ftp server:
1.1 dsieger 2800:
1.26 spz 2801: ftp://ftp.NetBSD.org/pkgsrc/distfiles/pkg-vulnerabilities
1.1 dsieger 2802:
1.21 snj 2803: 2. pkg_admin audit, an easy way to audit the current machine, checking each
1.24 wiz 2804: known vulnerability. If a vulnerable package is installed, it will be shown
2805: by output to stdout, including a description of the type of vulnerability,
2806: and a URL containing more information.
1.1 dsieger 2807:
1.14 jmcneill 2808: Use of these tools is strongly recommended! After "pkg_install" is installed,
2809: please read the package's message, which you can get by running pkg_info -D
2810: pkg_install.
1.1 dsieger 2811:
2812: If this package is installed, pkgsrc builds will use it to perform a security
2813: check before building any package. See Section 5.2, "Variables affecting the
2814: build process" for ways to control this check.
2815:
1.65 wiz 2816: 9.16. Why do some packages ignore my CFLAGS?
1.1 dsieger 2817:
2818: When you add your own preferences to the CFLAGS variable in your mk.conf, these
2819: flags are passed in environment variables to the ./configure scripts and to
2820: make(1). Some package authors ignore the CFLAGS from the environment variable
2821: by overriding them in the Makefiles of their package.
2822:
2823: Currently there is no solution to this problem. If you really need the package
2824: to use your CFLAGS you should run make patch in the package directory and then
2825: inspect any Makefile and Makefile.in for whether they define CFLAGS explicitly.
2826: Usually you can remove these lines. But be aware that some "smart" programmers
2827: write so bad code that it only works for the specific combination of CFLAGS
2828: they have chosen.
2829:
1.65 wiz 2830: 9.17. A package does not build. What shall I do?
1.1 dsieger 2831:
2832: 1. Make sure that your copy of pkgsrc is consistent. A case that occurs often
2833: is that people only update pkgsrc in parts, because of performance reasons.
2834: Since pkgsrc is one large system, not a collection of many small systems,
2835: there are sometimes changes that only work when the whole pkgsrc tree is
2836: updated.
2837:
1.25 wiz 2838: 2. Make sure that you don't have any CVS conflicts. Search for "<<<<<<" or "
2839: >>>>>>" in all your pkgsrc files.
1.1 dsieger 2840:
1.25 wiz 2841: 3. Make sure that you don't have old copies of the packages extracted. Run
1.1 dsieger 2842: make clean clean-depends to verify this.
2843:
2844: 4. If the problem still exists, write a mail to the pkgsrc-users mailing list.
2845:
1.65 wiz 2846: 9.18. What does "Makefile appears to contain unresolved cvs/rcs/??? merge
1.1 dsieger 2847: conflicts" mean?
2848:
2849: You have modified a file from pkgsrc, and someone else has modified that same
2850: file afterwards in the CVS repository. Both changes are in the same region of
2851: the file, so when you updated pkgsrc, the cvs command marked the conflicting
2852: changes in the file. Because of these markers, the file is no longer a valid
2853: Makefile.
2854:
2855: Have a look at that file, and if you don't need your local changes anymore, you
2856: can remove that file and run cvs -q update -dP in that directory to download
2857: the current version.
2858:
2859: Part II. The pkgsrc developer's guide
2860:
2861: This part of the book deals with creating and modifying packages. It starts
2862: with a "HOWTO"-like guide on creating a new package. The remaining chapters are
2863: more like a reference manual for pkgsrc.
2864:
2865: Table of Contents
2866:
1.6 rillig 2867: 10. Creating a new pkgsrc package from scratch
1.1 dsieger 2868:
1.6 rillig 2869: 10.1. Common types of packages
1.1 dsieger 2870:
1.6 rillig 2871: 10.1.1. Perl modules
1.66 asau 2872: 10.1.2. KDE3 applications
1.17 imil 2873: 10.1.3. Python modules and programs
1.1 dsieger 2874:
1.6 rillig 2875: 10.2. Examples
1.1 dsieger 2876:
1.6 rillig 2877: 10.2.1. How the www/nvu package came into pkgsrc
1.1 dsieger 2878:
1.6 rillig 2879: 11. Package components - files, directories and contents
1.1 dsieger 2880:
1.6 rillig 2881: 11.1. Makefile
2882: 11.2. distinfo
2883: 11.3. patches/*
1.1 dsieger 2884:
1.6 rillig 2885: 11.3.1. Structure of a single patch file
2886: 11.3.2. Creating patch files
2887: 11.3.3. Sources where the patch files come from
2888: 11.3.4. Patching guidelines
2889: 11.3.5. Feedback to the author
1.1 dsieger 2890:
1.6 rillig 2891: 11.4. Other mandatory files
2892: 11.5. Optional files
1.1 dsieger 2893:
1.6 rillig 2894: 11.5.1. Files affecting the binary package
2895: 11.5.2. Files affecting the build process
2896: 11.5.3. Files affecting nothing at all
1.1 dsieger 2897:
1.6 rillig 2898: 11.6. work*
2899: 11.7. files/*
1.1 dsieger 2900:
1.6 rillig 2901: 12. Programming in Makefiles
1.1 dsieger 2902:
1.6 rillig 2903: 12.1. Caveats
2904: 12.2. Makefile variables
1.1 dsieger 2905:
1.6 rillig 2906: 12.2.1. Naming conventions
1.1 dsieger 2907:
1.6 rillig 2908: 12.3. Code snippets
1.1 dsieger 2909:
1.6 rillig 2910: 12.3.1. Adding things to a list
2911: 12.3.2. Converting an internal list into an external list
2912: 12.3.3. Passing variables to a shell command
2913: 12.3.4. Quoting guideline
2914: 12.3.5. Workaround for a bug in BSD Make
1.1 dsieger 2915:
1.6 rillig 2916: 13. PLIST issues
1.1 dsieger 2917:
1.6 rillig 2918: 13.1. RCS ID
2919: 13.2. Semi-automatic PLIST generation
2920: 13.3. Tweaking output of make print-PLIST
2921: 13.4. Variable substitution in PLIST
2922: 13.5. Man page compression
2923: 13.6. Changing PLIST source with PLIST_SRC
2924: 13.7. Platform-specific and differing PLISTs
2925: 13.8. Sharing directories between packages
1.1 dsieger 2926:
1.6 rillig 2927: 14. Buildlink methodology
1.1 dsieger 2928:
1.6 rillig 2929: 14.1. Converting packages to use buildlink3
2930: 14.2. Writing buildlink3.mk files
1.1 dsieger 2931:
1.6 rillig 2932: 14.2.1. Anatomy of a buildlink3.mk file
1.27 wiz 2933: 14.2.2. Updating BUILDLINK_API_DEPENDS.pkg and BUILDLINK_ABI_DEPENDS.
2934: pkg in buildlink3.mk files
1.1 dsieger 2935:
1.6 rillig 2936: 14.3. Writing builtin.mk files
1.1 dsieger 2937:
1.6 rillig 2938: 14.3.1. Anatomy of a builtin.mk file
2939: 14.3.2. Global preferences for native or pkgsrc software
1.1 dsieger 2940:
1.6 rillig 2941: 15. The pkginstall framework
1.1 dsieger 2942:
1.6 rillig 2943: 15.1. Files and directories outside the installation prefix
1.1 dsieger 2944:
1.6 rillig 2945: 15.1.1. Directory manipulation
2946: 15.1.2. File manipulation
1.1 dsieger 2947:
1.6 rillig 2948: 15.2. Configuration files
1.1 dsieger 2949:
1.6 rillig 2950: 15.2.1. How PKG_SYSCONFDIR is set
2951: 15.2.2. Telling the software where configuration files are
2952: 15.2.3. Patching installations
2953: 15.2.4. Disabling handling of configuration files
1.1 dsieger 2954:
1.6 rillig 2955: 15.3. System startup scripts
1.1 dsieger 2956:
1.6 rillig 2957: 15.3.1. Disabling handling of system startup scripts
1.1 dsieger 2958:
1.6 rillig 2959: 15.4. System users and groups
2960: 15.5. System shells
1.1 dsieger 2961:
1.6 rillig 2962: 15.5.1. Disabling shell registration
1.1 dsieger 2963:
1.6 rillig 2964: 15.6. Fonts
1.1 dsieger 2965:
1.6 rillig 2966: 15.6.1. Disabling automatic update of the fonts databases
1.1 dsieger 2967:
1.6 rillig 2968: 16. Options handling
1.1 dsieger 2969:
1.6 rillig 2970: 16.1. Global default options
2971: 16.2. Converting packages to use bsd.options.mk
2972: 16.3. Option Names
1.7 rillig 2973: 16.4. Determining the options of dependencies
1.1 dsieger 2974:
1.6 rillig 2975: 17. The build process
1.1 dsieger 2976:
1.6 rillig 2977: 17.1. Introduction
2978: 17.2. Program location
2979: 17.3. Directories used during the build process
2980: 17.4. Running a phase
2981: 17.5. The fetch phase
1.1 dsieger 2982:
1.6 rillig 2983: 17.5.1. What to fetch and where to get it from
2984: 17.5.2. How are the files fetched?
1.1 dsieger 2985:
1.6 rillig 2986: 17.6. The checksum phase
2987: 17.7. The extract phase
2988: 17.8. The patch phase
2989: 17.9. The tools phase
2990: 17.10. The wrapper phase
2991: 17.11. The configure phase
2992: 17.12. The build phase
2993: 17.13. The test phase
2994: 17.14. The install phase
2995: 17.15. The package phase
2996: 17.16. Cleaning up
2997: 17.17. Other helpful targets
1.1 dsieger 2998:
1.6 rillig 2999: 18. Tools needed for building or running
1.1 dsieger 3000:
1.6 rillig 3001: 18.1. Tools for pkgsrc builds
3002: 18.2. Tools needed by packages
3003: 18.3. Tools provided by platforms
3004: 18.4. Questions regarding the tools
1.1 dsieger 3005:
1.6 rillig 3006: 19. Making your package work
1.1 dsieger 3007:
1.6 rillig 3008: 19.1. General operation
1.1 dsieger 3009:
1.6 rillig 3010: 19.1.1. Portability of packages
1.24 wiz 3011: 19.1.2. How to pull in user-settable variables from mk.conf
1.6 rillig 3012: 19.1.3. User interaction
3013: 19.1.4. Handling licenses
3014: 19.1.5. Restricted packages
3015: 19.1.6. Handling dependencies
3016: 19.1.7. Handling conflicts with other packages
3017: 19.1.8. Packages that cannot or should not be built
3018: 19.1.9. Packages which should not be deleted, once installed
3019: 19.1.10. Handling packages with security problems
3020: 19.1.11. How to handle incrementing versions when fixing an existing
1.1 dsieger 3021: package
1.6 rillig 3022: 19.1.12. Substituting variable text in the package files (the SUBST
1.1 dsieger 3023: framework)
3024:
1.6 rillig 3025: 19.2. Fixing problems in the fetch phase
1.1 dsieger 3026:
1.6 rillig 3027: 19.2.1. Packages whose distfiles aren't available for plain downloading
3028: 19.2.2. How to handle modified distfiles with the 'old' name
1.1 dsieger 3029:
1.6 rillig 3030: 19.3. Fixing problems in the configure phase
1.1 dsieger 3031:
1.6 rillig 3032: 19.3.1. Shared libraries - libtool
3033: 19.3.2. Using libtool on GNU packages that already support libtool
3034: 19.3.3. GNU Autoconf/Automake
3035:
3036: 19.4. Programming languages
3037:
3038: 19.4.1. C, C++, and Fortran
3039: 19.4.2. Java
3040: 19.4.3. Packages containing perl scripts
1.41 wiz 3041: 19.4.4. Packages containing shell scripts
3042: 19.4.5. Other programming languages
1.6 rillig 3043:
3044: 19.5. Fixing problems in the build phase
3045:
3046: 19.5.1. Compiling C and C++ code conditionally
3047: 19.5.2. How to handle compiler bugs
1.24 wiz 3048: 19.5.3. Undefined reference to "..."
1.6 rillig 3049: 19.5.4. Running out of memory
3050:
3051: 19.6. Fixing problems in the install phase
3052:
3053: 19.6.1. Creating needed directories
3054: 19.6.2. Where to install documentation
3055: 19.6.3. Installing highscore files
3056: 19.6.4. Adding DESTDIR support to packages
3057: 19.6.5. Packages with hardcoded paths to other interpreters
3058: 19.6.6. Packages installing perl modules
3059: 19.6.7. Packages installing info files
3060: 19.6.8. Packages installing man pages
1.7 rillig 3061: 19.6.9. Packages installing GConf data files
1.18 mishka 3062: 19.6.10. Packages installing scrollkeeper/rarian data files
1.6 rillig 3063: 19.6.11. Packages installing X11 fonts
3064: 19.6.12. Packages installing GTK2 modules
3065: 19.6.13. Packages installing SGML or XML data
3066: 19.6.14. Packages installing extensions to the MIME database
3067: 19.6.15. Packages using intltool
3068: 19.6.16. Packages installing startup scripts
3069: 19.6.17. Packages installing TeX modules
3070: 19.6.18. Packages supporting running binaries in emulation
3071: 19.6.19. Packages installing hicolor theme icons
3072: 19.6.20. Packages installing desktop files
3073:
3074: 19.7. Marking packages as having problems
3075:
3076: 20. Debugging
3077: 21. Submitting and Committing
3078:
3079: 21.1. Submitting binary packages
3080: 21.2. Submitting source packages (for non-NetBSD-developers)
3081: 21.3. General notes when adding, updating, or removing packages
1.34 wiz 3082: 21.4. Committing: Adding a package to CVS
1.6 rillig 3083: 21.5. Updating a package to a newer version
1.21 snj 3084: 21.6. Renaming a package in pkgsrc
3085: 21.7. Moving a package in pkgsrc
1.6 rillig 3086:
3087: 22. Frequently Asked Questions
3088: 23. GNOME packaging and porting
3089:
3090: 23.1. Meta packages
3091: 23.2. Packaging a GNOME application
3092: 23.3. Updating GNOME to a newer version
3093: 23.4. Patching guidelines
1.1 dsieger 3094:
1.6 rillig 3095: Chapter 10. Creating a new pkgsrc package from scratch
1.1 dsieger 3096:
3097: Table of Contents
3098:
1.6 rillig 3099: 10.1. Common types of packages
1.1 dsieger 3100:
1.6 rillig 3101: 10.1.1. Perl modules
1.66 asau 3102: 10.1.2. KDE3 applications
1.17 imil 3103: 10.1.3. Python modules and programs
1.1 dsieger 3104:
1.6 rillig 3105: 10.2. Examples
1.1 dsieger 3106:
1.6 rillig 3107: 10.2.1. How the www/nvu package came into pkgsrc
1.1 dsieger 3108:
3109: When you find a package that is not yet in pkgsrc, you most likely have a URL
3110: from where you can download the source code. Starting with this URL, creating a
3111: package involves only a few steps.
3112:
3113: 1. First, install the packages pkgtools/url2pkg and pkgtools/pkglint.
3114:
3115: 2. Then, choose one of the top-level directories as the category in which you
3116: want to place your package. You can also create a directory of your own
3117: (maybe called local). In that category directory, create another directory
3118: for your package and change into it.
3119:
3120: 3. Run the program url2pkg, which will ask you for a URL. Enter the URL of the
3121: distribution file (in most cases a .tar.gz file) and watch how the basic
3122: ingredients of your package are created automatically. The distribution
3123: file is extracted automatically to fill in some details in the Makefile
3124: that would otherwise have to be done manually.
3125:
3126: 4. Examine the extracted files to determine the dependencies of your package.
3127: Ideally, this is mentioned in some README file, but things may differ. For
3128: each of these dependencies, look where it exists in pkgsrc, and if there is
3129: a file called buildlink3.mk in that directory, add a line to your package
3130: Makefile which includes that file just before the last line. If the
1.26 spz 3131: buildlink3.mk file does not exist, it must be created first. The
3132: buildlink3.mk file makes sure that the package's include files and
3133: libraries are provided.
3134:
3135: If you just need binaries from a package, add a DEPENDS line to the
3136: Makefile, which specifies the version of the dependency and where it can be
3137: found in pkgsrc. This line should be placed in the third paragraph. If the
1.1 dsieger 3138: dependency is only needed for building the package, but not when using it,
3139: use BUILD_DEPENDS instead of DEPENDS. Your package may then look like this:
3140:
3141: [...]
3142:
1.66 asau 3143: BUILD_DEPENDS+= libxslt-[0-9]*:../../textproc/libxslt
1.1 dsieger 3144: DEPENDS+= screen-[0-9]*:../../misc/screen
3145: DEPENDS+= screen>=4.0:../../misc/screen
3146:
3147: [...]
3148:
3149: .include "../../category/package/buildlink3.mk"
3150: .include "../../devel/glib2/buildlink3.mk"
3151: .include "../../mk/bsd.pkg.mk"
3152:
3153: 5. Run pkglint to see what things still need to be done to make your package a
3154: "good" one. If you don't know what pkglint's warnings want to tell you, try
3155: pkglint --explain or pkglint -e, which outputs additional explanations.
3156:
3157: 6. In many cases the package is not yet ready to build. You can find
1.6 rillig 3158: instructions for the most common cases in the next section, Section 10.1,
1.1 dsieger 3159: "Common types of packages". After you have followed the instructions over
3160: there, you can hopefully continue here.
3161:
3162: 7. Run bmake clean to clean the working directory from the extracted files.
3163: Besides these files, a lot of cache files and other system information has
3164: been saved in the working directory, which may become wrong after you
3165: edited the Makefile.
3166:
3167: 8. Now, run bmake to build the package. For the various things that can go
1.6 rillig 3168: wrong in this phase, consult Chapter 19, Making your package work.
1.1 dsieger 3169:
1.25 wiz 3170: 9. When the package builds fine, the next step is to install the package. Run
1.1 dsieger 3171: bmake install and hope that everything works.
3172:
3173: 10. Up to now, the file PLIST, which contains a list of the files that are
3174: installed by the package, is nearly empty. Run bmake print-PLIST >PLIST to
3175: generate a probably correct list. Check the file using your preferred text
3176: editor to see if the list of files looks plausible.
3177:
3178: 11. Run pkglint again to see if the generated PLIST contains garbage or not.
3179:
3180: 12. When you ran bmake install, the package has been registered in the database
3181: of installed files, but with an empty list of files. To fix this, run bmake
3182: deinstall and bmake install again. Now the package is registered with the
3183: list of files from PLIST.
3184:
3185: 13. Run bmake package to create a binary package from the set of installed
3186: files.
3187:
1.6 rillig 3188: 10.1. Common types of packages
1.1 dsieger 3189:
1.6 rillig 3190: 10.1.1. Perl modules
1.1 dsieger 3191:
3192: Simple Perl modules are handled automatically by url2pkg, including
3193: dependencies.
3194:
1.66 asau 3195: 10.1.2. KDE3 applications
1.1 dsieger 3196:
1.66 asau 3197: KDE3 applications should always include meta-pkgs/kde3/kde3.mk, which contains
3198: numerous settings that are typical of KDE3 packages.
1.1 dsieger 3199:
1.17 imil 3200: 10.1.3. Python modules and programs
3201:
3202: Python modules and programs packages are easily created using a set of
3203: predefined variables.
3204:
1.63 wiz 3205: If some Python versions are not supported by the software, set the
3206: PYTHON_VERSIONS_INCOMPATIBLE variable to the Python versions that are not
3207: supported, e.g.
1.17 imil 3208:
1.64 wiz 3209: PYTHON_VERSIONS_INCOMPATIBLE= 26
1.17 imil 3210:
3211: If the packaged software is a Python module, include "../../lang/python/
1.25 wiz 3212: extension.mk". In this case, the package directory should be called "
3213: py-software" and PKGNAME should be set to "${PYPKGPREFIX}-${DISTNAME}", e.g.
1.17 imil 3214:
3215: DISTNAME= foopymodule-1.2.10
3216: PKGNAME= ${PYPKGPREFIX}-${DISTNAME}
3217:
1.63 wiz 3218: If it is an application, include "../../lang/python/application.mk". In order
3219: to correctly set the path to the Python interpreter, use the REPLACE_PYTHON
3220: variable and set it to the list of files (paths relative to WRKSRC) that must
3221: be corrected. For example:
1.17 imil 3222:
1.63 wiz 3223: REPLACE_PYTHON= *.py
1.17 imil 3224:
1.63 wiz 3225: Most Python packages use either "distutils" or easy-setup ("eggs"). If the
3226: software uses "distutils", include "../../lang/python/distutils.mk". so pkgsrc
3227: will use this framework. "distutils" uses a script called setup.py, if the "
3228: distutils" driver is not called setup.py, set the PYSETUP variable to the name
3229: of the script.
3230:
3231: Otherwise, if the packaged software is egg-aware, you only need to include "..
3232: /../lang/python/egg.mk".
3233:
3234: Some Python modules have separate distributions for Python-2.x and Python-3.x
3235: support. In pkgsrc this is handled by the versioned_dependencies.mk file. Set
3236: PYTHON_VERSIONED_DEPENDENCIES to the list of packages that should be depended
3237: upon and include "../../lang/python/versioned_dependencies.mk", then the pkgsrc
3238: infrastructure will depend on the appropriate package version. For example:
1.17 imil 3239:
1.63 wiz 3240: PYTHON_VERSIONED_DEPENDENCIES=dateutil dns
3241:
3242: Look inside versioned_dependencies.mk for a list of supported packages.
1.17 imil 3243:
1.6 rillig 3244: 10.2. Examples
1.1 dsieger 3245:
1.6 rillig 3246: 10.2.1. How the www/nvu package came into pkgsrc
1.1 dsieger 3247:
1.6 rillig 3248: 10.2.1.1. The initial package
1.1 dsieger 3249:
3250: Looking at the file pkgsrc/doc/TODO, I saw that the "nvu" package has not yet
3251: been imported into pkgsrc. As the description says it has to do with the web,
3252: the obvious choice for the category is "www".
3253:
3254: $ mkdir www/nvu
3255: $ cd www/nvu
3256:
3257: The web site says that the sources are available as a tar file, so I fed that
3258: URL to the url2pkg program:
3259:
3260: $ url2pkg http://cvs.nvu.com/download/nvu-1.0-sources.tar.bz2
3261:
3262: My editor popped up, and I added a PKGNAME line below the DISTNAME line, as the
3263: package name should not have the word "sources" in it. I also filled in the
3264: MAINTAINER, HOMEPAGE and COMMENT fields. Then the package Makefile looked like
3265: that:
3266:
1.2 rillig 3267: # $NetBSD$
1.1 dsieger 3268: #
3269:
3270: DISTNAME= nvu-1.0-sources
3271: PKGNAME= nvu-1.0
3272: CATEGORIES= www
3273: MASTER_SITES= http://cvs.nvu.com/download/
3274: EXTRACT_SUFX= .tar.bz2
3275:
3276: MAINTAINER= rillig@NetBSD.org
3277: HOMEPAGE= http://cvs.nvu.com/
3278: COMMENT= Web Authoring System
3279:
3280: # url2pkg-marker (please do not remove this line.)
3281: .include "../../mk/bsd.pkg.mk"
3282:
3283: Then, I quit the editor and watched pkgsrc downloading a large source archive:
3284:
3285: url2pkg> Running "make makesum" ...
3286: => Required installed package digest>=20010302: digest-20060826 found
3287: => Fetching nvu-1.0-sources.tar.bz2
3288: Requesting http://cvs.nvu.com/download/nvu-1.0-sources.tar.bz2
3289: 100% |*************************************| 28992 KB 150.77 KB/s00:00 ETA
3290: 29687976 bytes retrieved in 03:12 (150.77 KB/s)
3291: url2pkg> Running "make extract" ...
3292: => Required installed package digest>=20010302: digest-20060826 found
3293: => Checksum SHA1 OK for nvu-1.0-sources.tar.bz2
3294: => Checksum RMD160 OK for nvu-1.0-sources.tar.bz2
3295: work.bacc -> /tmp/roland/pkgsrc/www/nvu/work.bacc
3296: ===> Installing dependencies for nvu-1.0
3297: ===> Overriding tools for nvu-1.0
3298: ===> Extracting for nvu-1.0
3299: url2pkg> Adjusting the Makefile.
3300:
3301: Remember to correct CATEGORIES, HOMEPAGE, COMMENT, and DESCR when you're done!
3302:
3303: Good luck! (See pkgsrc/doc/pkgsrc.txt for some more help :-)
3304:
1.6 rillig 3305: 10.2.1.2. Fixing all kinds of problems to make the package work
1.1 dsieger 3306:
3307: Now that the package has been extracted, let's see what's inside it. The
3308: package has a README.txt, but that only says something about mozilla, so it's
3309: probably useless for seeing what dependencies this package has. But since there
3310: is a GNU configure script in the package, let's hope that it will complain
3311: about everything it needs.
3312:
3313: $ bmake
3314: => Required installed package digest>=20010302: digest-20060826 found
3315: => Checksum SHA1 OK for nvu-1.0-sources.tar.bz2
3316: => Checksum RMD160 OK for nvu-1.0-sources.tar.bz2
3317: ===> Patching for nvu-1.0
3318: ===> Creating toolchain wrappers for nvu-1.0
3319: ===> Configuring for nvu-1.0
3320: [...]
3321: configure: error: Perl 5.004 or higher is required.
3322: [...]
3323: WARNING: Please add USE_TOOLS+=perl to the package Makefile.
3324: [...]
3325:
3326: That worked quite well. So I opened the package Makefile in my editor, and
3327: since it already has a USE_TOOLS line, I just appended "perl" to it. Since the
3328: dependencies of the package have changed now, and since a perl wrapper is
3329: automatically installed in the "tools" phase, I need to build the package from
3330: scratch.
3331:
3332: $ bmake clean
3333: ===> Cleaning for nvu-1.0
3334: $ bmake
3335: [...]
3336: *** /tmp/roland/pkgsrc/www/nvu/work.bacc/.tools/bin/make is not \
3337: GNU Make. You will not be able to build Mozilla without GNU Make.
3338: [...]
3339:
3340: So I added "gmake" to the USE_TOOLS line and tried again (from scratch).
3341:
3342: [...]
3343: checking for GTK - version >= 1.2.0... no
3344: *** Could not run GTK test program, checking why...
3345: [...]
3346:
3347: Now to the other dependencies. The first question is: Where is the GTK package
3348: hidden in pkgsrc?
3349:
3350: $ echo ../../*/gtk*
3351: [many packages ...]
3352: $ echo ../../*/gtk
3353: ../../x11/gtk
3354: $ echo ../../*/gtk2
3355: ../../x11/gtk2
3356: $ echo ../../*/gtk2/bui*
3357: ../../x11/gtk2/buildlink3.mk
3358:
3359: The first try was definitely too broad. The second one had exactly one result,
3360: which is very good. But there is one pitfall with GNOME packages. Before GNOME
3361: 2 had been released, there were already many GNOME 1 packages in pkgsrc. To be
3362: able to continue to use these packages, the GNOME 2 packages were imported as
3363: separate packages, and their names usually have a "2" appended. So I checked
3364: whether this was the case here, and indeed it was.
3365:
3366: Since the GTK2 package has a buildlink3.mk file, adding the dependency is very
3367: easy. I just inserted an .include line before the last line of the package
3368: Makefile, so that it now looks like this:
3369:
3370: [...]
3371: .include "../../x11/gtk2/buildlink3.mk"
3372: .include "../../mk/bsd.pkg.mk
3373:
3374: After another bmake clean && bmake, the answer was:
3375:
3376: [...]
3377: checking for gtk-config... /home/roland/pkg/bin/gtk-config
3378: checking for GTK - version >= 1.2.0... no
3379: *** Could not run GTK test program, checking why...
3380: *** The test program failed to compile or link. See the file config.log for the
3381: *** exact error that occured. This usually means GTK was incorrectly installed
3382: *** or that you have moved GTK since it was installed. In the latter case, you
3383: *** may want to edit the gtk-config script: /home/roland/pkg/bin/gtk-config
3384: configure: error: Test for GTK failed.
3385: [...]
3386:
3387: In this particular case, the assumption that "every package prefers GNOME 2"
3388: had been wrong. The first of the lines above told me that this package really
3389: wanted to have the GNOME 1 version of GTK. If the package had looked for GTK2,
3390: it would have looked for pkg-config instead of gtk-config. So I changed the x11
3391: /gtk2 to x11/gtk in the package Makefile, and tried again.
3392:
3393: [...]
1.59 jnemeth 3394: cc -o xpidl.o -c -DOSTYPE=\"NetBSD3\" -DOSARCH=\"NetBSD\" [...]
1.1 dsieger 3395: In file included from xpidl.c:42:
3396: xpidl.h:53:24: libIDL/IDL.h: No such file or directory
3397: In file included from xpidl.c:42:
3398: xpidl.h:132: error: parse error before "IDL_ns"
3399: [...]
3400:
3401: The package still does not find all of its dependencies. Now the question is:
3402: Which package provides the libIDL/IDL.h header file?
3403:
3404: $ echo ../../*/*idl*
3405: ../../devel/py-idle ../../wip/idled ../../x11/acidlaunch
3406: $ echo ../../*/*IDL*
3407: ../../net/libIDL
3408:
3409: Let's take the one from the second try. So I included the ../../net/libIDL/
3410: buildlink3.mk file and tried again. But the error didn't change. After digging
3411: through some of the code, I concluded that the build process of the package was
3412: broken and couldn't have ever worked, but since the Mozilla source tree is
3413: quite large, I didn't want to fix it. So I added the following to the package
3414: Makefile and tried again:
3415:
3416: CPPFLAGS+= -I${BUILDLINK_PREFIX.libIDL}/include/libIDL-2.0
3417: BUILDLINK_TRANSFORM+= -l:IDL:IDL-2
3418:
3419: The latter line is needed because the package expects the library libIDL.so,
3420: but only libIDL-2.so is available. So I told the compiler wrapper to rewrite
3421: that on the fly.
3422:
3423: The next problem was related to a recent change of the FreeType interface. I
3424: looked up in www/seamonkey which patch files were relevant for this issue and
3425: copied them to the patches directory. Then I retried, fixed the patches so that
3426: they applied cleanly and retried again. This time, everything worked.
3427:
1.6 rillig 3428: 10.2.1.3. Installing the package
1.1 dsieger 3429:
3430: $ bmake CHECK_FILES=no install
3431: [...]
3432: $ bmake print-PLIST >PLIST
3433: $ bmake deinstall
3434: $ bmake install
3435:
1.6 rillig 3436: Chapter 11. Package components - files, directories and contents
1.1 dsieger 3437:
3438: Table of Contents
3439:
1.6 rillig 3440: 11.1. Makefile
3441: 11.2. distinfo
3442: 11.3. patches/*
3443:
3444: 11.3.1. Structure of a single patch file
3445: 11.3.2. Creating patch files
3446: 11.3.3. Sources where the patch files come from
3447: 11.3.4. Patching guidelines
3448: 11.3.5. Feedback to the author
3449:
3450: 11.4. Other mandatory files
3451: 11.5. Optional files
3452:
3453: 11.5.1. Files affecting the binary package
3454: 11.5.2. Files affecting the build process
3455: 11.5.3. Files affecting nothing at all
1.1 dsieger 3456:
1.6 rillig 3457: 11.6. work*
3458: 11.7. files/*
1.1 dsieger 3459:
3460: Whenever you're preparing a package, there are a number of files involved which
3461: are described in the following sections.
3462:
1.6 rillig 3463: 11.1. Makefile
1.1 dsieger 3464:
3465: Building, installation and creation of a binary package are all controlled by
3466: the package's Makefile. The Makefile describes various things about a package,
3467: for example from where to get it, how to configure, build, and install it.
3468:
3469: A package Makefile contains several sections that describe the package.
3470:
3471: In the first section there are the following variables, which should appear
3472: exactly in the order given here. The order and grouping of the variables is
3473: mostly historical and has no further meaning.
3474:
3475: * DISTNAME is the basename of the distribution file to be downloaded from the
3476: package's website.
3477:
1.66 asau 3478: * PKGNAME is the name of the package, as used by pkgsrc. You need to provide
3479: it if DISTNAME (which is the default) is not a good name for the package in
3480: pkgsrc or DISTNAME is not provided (no distribution file is required).
3481: Usually it is the pkgsrc directory name together with the version number.
3482: It must match the regular expression ^[A-Za-z0-9][A-Za-z0-9-_.+]*$, that
3483: is, it starts with a letter or digit, and contains only letters, digits,
3484: dashes, underscores, dots and plus signs.
1.1 dsieger 3485:
3486: * SVR4_PKGNAME is the name of the package file to create if the PKGNAME isn't
3487: unique on a SVR4 system. The default is PKGNAME, which may be shortened
3488: when you use pkgtools/gensolpkg. Only add SVR4_PKGNAME if PKGNAME does not
3489: produce an unique package name on a SVR4 system. The length of SVR4_PKGNAME
3490: is limited to 5 characters.
3491:
3492: * CATEGORIES is a list of categories which the package fits in. You can
3493: choose any of the top-level directories of pkgsrc for it.
3494:
3495: Currently the following values are available for CATEGORIES. If more than
3496: one is used, they need to be separated by spaces:
3497:
3498: archivers cross geography meta-pkgs security
3499: audio databases graphics misc shells
3500: benchmarks devel ham multimedia sysutils
3501: biology editors inputmethod net textproc
3502: cad emulators lang news time
3503: chat finance mail parallel wm
3504: comms fonts math pkgtools www
3505: converters games mbone print x11
3506:
3507: * MASTER_SITES, DYNAMIC_MASTER_SITES, DIST_SUBDIR, EXTRACT_SUFX and DISTFILES
1.6 rillig 3508: are discussed in detail in Section 17.5, "The fetch phase".
1.1 dsieger 3509:
3510: The second section contains information about separately downloaded patches, if
3511: any.
3512:
3513: * PATCHFILES: Name(s) of additional files that contain distribution patches.
3514: There is no default. pkgsrc will look for them at PATCH_SITES. They will
3515: automatically be uncompressed before patching if the names end with .gz or
3516: .Z.
3517:
3518: * PATCH_SITES: Primary location(s) for distribution patch files (see
3519: PATCHFILES below) if not found locally.
3520:
3521: The third section contains the following variables.
3522:
3523: * MAINTAINER is the email address of the person who feels responsible for
3524: this package, and who is most likely to look at problems or questions
3525: regarding this package which have been reported with send-pr(1). Other
1.14 jmcneill 3526: developers may contact the MAINTAINER before making changes to the package,
3527: but are not required to do so. When packaging a new program, set MAINTAINER
3528: to yourself. If you really can't maintain the package for future updates,
3529: set it to <pkgsrc-users@NetBSD.org>.
3530:
3531: * OWNER should be used instead of MAINTAINER when you do not want other
3532: developers to update or change the package without contacting you first. A
3533: package Makefile should contain one of MAINTAINER or OWNER, but not both.
1.1 dsieger 3534:
3535: * HOMEPAGE is a URL where users can find more information about the package.
3536:
3537: * COMMENT is a one-line description of the package (should not include the
3538: package name).
3539:
3540: Other variables that affect the build:
3541:
3542: * WRKSRC: The directory where the interesting distribution files of the
3543: package are found. The default is ${WRKDIR}/${DISTNAME}, which works for
3544: most packages.
3545:
3546: If a package doesn't create a subdirectory for itself (most GNU software
3547: does, for instance), but extracts itself in the current directory, you
3548: should set WRKSRC=${WRKDIR}.
3549:
3550: If a package doesn't create a subdirectory with the name of DISTNAME but
3551: some different name, set WRKSRC to point to the proper name in ${WRKDIR},
3552: for example WRKSRC=${WRKDIR}/${DISTNAME}/unix. See lang/tcl and x11/tk for
3553: other examples.
3554:
3555: The name of the working directory created by pkgsrc is taken from the
3556: WRKDIR_BASENAME variable. By default, its value is work. If you want to use
3557: the same pkgsrc tree for building different kinds of binary packages, you
3558: can change the variable according to your needs. Two other variables handle
3559: common cases of setting WRKDIR_BASENAME individually. If OBJHOSTNAME is
1.4 rillig 3560: defined in mk.conf, the first component of the host's name is attached to
3561: the directory name. If OBJMACHINE is defined, the platform name is
1.1 dsieger 3562: attached, which might look like work.i386 or work.sparc.
3563:
3564: Please pay attention to the following gotchas:
3565:
3566: * Add MANCOMPRESSED if man pages are installed in compressed form by the
3567: package. For packages using BSD-style makefiles which honor MANZ, there is
3568: MANCOMPRESSED_IF_MANZ.
3569:
3570: * Replace /usr/local with "${PREFIX}" in all files (see patches, below).
3571:
1.6 rillig 3572: * If the package installs any info files, see Section 19.6.7, "Packages
1.1 dsieger 3573: installing info files".
3574:
1.6 rillig 3575: 11.2. distinfo
1.1 dsieger 3576:
3577: The distinfo file contains the message digest, or checksum, of each distfile
3578: needed for the package. This ensures that the distfiles retrieved from the
3579: Internet have not been corrupted during transfer or altered by a malign force
3580: to introduce a security hole. Due to recent rumor about weaknesses of digest
3581: algorithms, all distfiles are protected using both SHA1 and RMD160 message
3582: digests, as well as the file size.
3583:
3584: The distinfo file also contains the checksums for all the patches found in the
1.6 rillig 3585: patches directory (see Section 11.3, "patches/*").
1.1 dsieger 3586:
3587: To regenerate the distinfo file, use the make makedistinfo or make mdi command.
3588:
3589: Some packages have different sets of distfiles depending on the platform, for
1.24 wiz 3590: example lang/openjdk7. These are kept in the same distinfo file and care should
3591: be taken when upgrading such a package to ensure distfile information is not
3592: lost.
1.1 dsieger 3593:
1.6 rillig 3594: 11.3. patches/*
1.1 dsieger 3595:
3596: Many packages still don't work out-of-the box on the various platforms that are
3597: supported by pkgsrc. Therefore, a number of custom patch files are needed to
3598: make the package work. These patch files are found in the patches/ directory.
3599:
3600: In the patch phase, these patches are applied to the files in WRKSRC directory
1.25 wiz 3601: after extracting them, in alphabetic order.
1.1 dsieger 3602:
1.6 rillig 3603: 11.3.1. Structure of a single patch file
1.1 dsieger 3604:
3605: The patch-* files should be in diff -bu format, and apply without a fuzz to
3606: avoid problems. (To force patches to apply with fuzz you can set
3607: PATCH_FUZZ_FACTOR=-F2). Furthermore, each patch should contain only changes for
3608: a single file, and no file should be patched by more than one patch file. This
3609: helps to keep future modifications simple.
3610:
3611: Each patch file is structured as follows: In the first line, there is the RCS
3612: Id of the patch itself. The second line should be empty for aesthetic reasons.
3613: After that, there should be a comment for each change that the patch does.
3614: There are a number of standard cases:
3615:
3616: * Patches for commonly known vulnerabilities should mention the vulnerability
3617: ID (CAN, CVE).
3618:
3619: * Patches that change source code should mention the platform and other
3620: environment (for example, the compiler) that the patch is needed for.
3621:
1.25 wiz 3622: In all, the patch should be commented so that any developer who knows the code
3623: of the application can make some use of the patch. Special care should be taken
3624: for the upstream developers, since we generally want that they accept our
3625: patches, so we have less work in the future.
1.1 dsieger 3626:
1.6 rillig 3627: 11.3.2. Creating patch files
1.1 dsieger 3628:
3629: One important thing to mention is to pay attention that no RCS IDs get stored
3630: in the patch files, as these will cause problems when later checked into the
3631: NetBSD CVS tree. Use the pkgdiff command from the pkgtools/pkgdiff package to
3632: avoid these problems.
3633:
3634: For even more automation, we recommend using mkpatches from the same package to
3635: make a whole set of patches. You just have to backup files before you edit them
1.25 wiz 3636: to filename.orig, e.g. with cp -p filename filename.orig or, easier, by using
1.1 dsieger 3637: pkgvi again from the same package. If you upgrade a package this way, you can
1.25 wiz 3638: easily compare the new set of patches with the previously existing one with
3639: patchdiff. The files in patches are replaced by new files, so carefully check
3640: if you want to take all the changes.
1.1 dsieger 3641:
3642: When you have finished a package, remember to generate the checksums for the
1.6 rillig 3643: patch files by using the make makepatchsum command, see Section 11.2,
1.1 dsieger 3644: "distinfo".
3645:
3646: When adding a patch that corrects a problem in the distfile (rather than e.g.
3647: enforcing pkgsrc's view of where man pages should go), send the patch as a bug
3648: report to the maintainer. This benefits non-pkgsrc users of the package, and
3649: usually makes it possible to remove the patch in future version.
3650:
1.25 wiz 3651: The file names of the patch files are usually of the form patch-
3652: path_to_file__with__underscores.c. Many packages still use the previous
3653: convention patch-[a-z][a-z], but new patches should be of the form containing
3654: the filename. mkpatches included in pkgtools/pkgdiff takes care of the name
3655: automatically.
1.2 rillig 3656:
1.6 rillig 3657: 11.3.3. Sources where the patch files come from
1.1 dsieger 3658:
3659: If you want to share patches between multiple packages in pkgsrc, e.g. because
3660: they use the same distfiles, set PATCHDIR to the path where the patch files can
3661: be found, e.g.:
3662:
3663: PATCHDIR= ${.CURDIR}/../xemacs/patches
3664:
3665: Patch files that are distributed by the author or other maintainers can be
3666: listed in PATCHFILES.
3667:
3668: If it is desired to store any patches that should not be committed into pkgsrc,
3669: they can be kept outside the pkgsrc tree in the $LOCALPATCHES directory. The
3670: directory tree there is expected to have the same "category/package" structure
3671: as pkgsrc, and patches are expected to be stored inside these dirs (also known
3672: as $LOCALPATCHES/$PKGPATH). For example, if you want to keep a private patch
3673: for pkgsrc/graphics/png, keep it in $LOCALPATCHES/graphics/png/mypatch. All
3674: files in the named directory are expected to be patch files, and they are
3675: applied after pkgsrc patches are applied.
3676:
1.6 rillig 3677: 11.3.4. Patching guidelines
1.1 dsieger 3678:
3679: When fixing a portability issue in the code do not use preprocessor magic to
3680: check for the current operating system nor platform. Doing so hurts portability
3681: to other platforms because the OS-specific details are not abstracted
3682: appropriately.
3683:
3684: The general rule to follow is: instead of checking for the operating system the
3685: application is being built on, check for the specific features you need. For
3686: example, instead of assuming that kqueue is available under NetBSD and using
3687: the __NetBSD__ macro to conditionalize kqueue support, add a check that detects
3688: kqueue itself ? yes, this generally involves patching the configure script.
3689: There is absolutely nothing that prevents some OSes from adopting interfaces
3690: from other OSes (e.g. Linux implementing kqueue), something that the above
3691: checks cannot take into account.
3692:
3693: Of course, checking for features generally involves more work on the
3694: developer's side, but the resulting changes are cleaner and there are chances
3695: they will work on many other platforms. Not to mention that there are higher
3696: chances of being later integrated into the mainstream sources. Remember: It
3697: doesn't work unless it is right!
3698:
3699: Some typical examples:
3700:
1.6 rillig 3701: Table 11.1. Patching examples
1.1 dsieger 3702:
3703: +-------------------------------------------------------------------------------------------+
3704: | Where | Incorrect | Correct |
3705: |---------+--------------------------+------------------------------------------------------|
3706: | |case ${target_os} in | |
3707: |configure|netbsd*) have_kvm=yes ;; |AC_CHECK_LIB(kvm, kvm_open, have_kvm=yes, have_kvm=no)|
3708: |script |*) have_kvm=no ;; | |
3709: | |esac | |
3710: |---------+--------------------------+------------------------------------------------------|
1.2 rillig 3711: |C source |#if defined(__NetBSD__) |#if defined(HAVE_SYS_EVENT_H) |
3712: |file |# include <sys/event.h> |# include <sys/event.h> |
3713: | |#endif |#endif |
1.1 dsieger 3714: |---------+--------------------------+------------------------------------------------------|
3715: | |int |int |
3716: | |monitor_file(...) |monitor_file(...) |
3717: | |{ |{ |
3718: | |#if defined(__NetBSD__) |#if defined(HAVE_KQUEUE) |
3719: |C source | int fd = kqueue();| int fd = kqueue(); |
3720: |file | ... | ... |
3721: | |#else |#else |
3722: | | ... | ... |
3723: | |#endif |#endif |
3724: | |} |} |
3725: +-------------------------------------------------------------------------------------------+
3726:
3727:
3728: For more information, please read the Making packager-friendly software article
3729: (part 1, part 2). It summarizes multiple details on how to make software easier
3730: to package; all the suggestions in it were collected from our experience in
3731: pkgsrc work, so they are possibly helpful when creating patches too.
3732:
1.6 rillig 3733: 11.3.5. Feedback to the author
1.1 dsieger 3734:
3735: Always, always, always feed back any portability fixes or improvements you do
3736: to a package to the mainstream developers. This is the only way to get their
3737: attention on portability issues and to ensure that future versions can be built
3738: out-of-the box on NetBSD. Furthermore, any user that gets newer distfiles will
3739: get the fixes straight from the packaged code.
3740:
3741: This generally involves cleaning up the patches (because sometimes the patches
1.41 wiz 3742: that are added to pkgsrc are quick hacks), filing bug reports in the
1.1 dsieger 3743: appropriate trackers for the projects and working with the mainstream authors
3744: to accept your changes. It is extremely important that you do it so that the
3745: packages in pkgsrc are kept simple and thus further changes can be done without
3746: much hassle.
3747:
1.25 wiz 3748: When you have done this, please add a URL to the upstream bug report to the
3749: patch comment.
3750:
1.1 dsieger 3751: Support the idea of free software!
3752:
1.6 rillig 3753: 11.4. Other mandatory files
1.1 dsieger 3754:
3755: DESCR
3756:
3757: A multi-line description of the piece of software. This should include any
3758: credits where they are due. Please bear in mind that others do not share
3759: your sense of humour (or spelling idiosyncrasies), and that others will
3760: read everything that you write here.
3761:
3762: PLIST
3763:
3764: This file governs the files that are installed on your system: all the
3765: binaries, manual pages, etc. There are other directives which may be
3766: entered in this file, to control the creation and deletion of directories,
1.6 rillig 3767: and the location of inserted files. See Chapter 13, PLIST issues for more
1.1 dsieger 3768: information.
3769:
1.6 rillig 3770: 11.5. Optional files
1.1 dsieger 3771:
1.6 rillig 3772: 11.5.1. Files affecting the binary package
1.1 dsieger 3773:
3774: INSTALL
3775:
3776: This shell script is invoked twice by pkg_add(1). First time after package
3777: extraction and before files are moved in place, the second time after the
3778: files to install are moved in place. This can be used to do any custom
3779: procedures not possible with @exec commands in PLIST. See pkg_add(1) and
1.6 rillig 3780: pkg_create(1) for more information. See also Section 15.1, "Files and
1.29 wiz 3781: directories outside the installation prefix". Please note that you can
3782: modify variables in it easily by using FILES_SUBST in the package's
3783: Makefile:
3784:
3785: FILES_SUBST+= SOMEVAR="somevalue"
3786:
3787: replaces "@SOMEVAR@" with "somevalue" in the INSTALL. By default,
3788: substitution is performed for PREFIX, LOCALBASE, X11BASE, VARBASE, and a
3789: few others, type make help topic=FILES_SUBST for a complete list.
1.1 dsieger 3790:
3791: DEINSTALL
3792:
3793: This script is executed before and after any files are removed. It is this
3794: script's responsibility to clean up any additional messy details around the
3795: package's installation, since all pkg_delete knows is how to delete the
3796: files created in the original distribution. See pkg_delete(1) and
1.29 wiz 3797: pkg_create(1) for more information. The same methods to replace variables
3798: can be used as for the INSTALL file.
1.1 dsieger 3799:
3800: MESSAGE
3801:
3802: This file is displayed after installation of the package. Useful for things
3803: like legal notices on almost-free software and hints for updating config
3804: files after installing modules for apache, PHP etc. Please note that you
3805: can modify variables in it easily by using MESSAGE_SUBST in the package's
3806: Makefile:
3807:
3808: MESSAGE_SUBST+= SOMEVAR="somevalue"
3809:
3810: replaces "${SOMEVAR}" with "somevalue" in MESSAGE. By default, substitution
3811: is performed for PKGNAME, PKGBASE, PREFIX, LOCALBASE, X11PREFIX, X11BASE,
1.16 jnemeth 3812: PKG_SYSCONFDIR, ROOT_GROUP, and ROOT_USER.
1.1 dsieger 3813:
3814: You can display a different or additional files by setting the MESSAGE_SRC
3815: variable. Its default is MESSAGE, if the file exists.
3816:
3817: ALTERNATIVES
3818:
1.66 asau 3819: This file is used by the alternatives framework. It creates, configures,
3820: and destroys generic wrappers used to run programs with similar interfaces.
3821: See pkg_alternatives(8) from pkgtools/pkg_alternatives for more
3822: information.
3823:
3824: Each line of the file contains two filenames, first the wrapper and then
3825: the alternative provided by the package. Both paths are relative to PREFIX.
1.1 dsieger 3826:
1.6 rillig 3827: 11.5.2. Files affecting the build process
1.1 dsieger 3828:
3829: Makefile.common
3830:
3831: This file contains arbitrary things that could also go into a Makefile, but
3832: its purpose is to be used by more than one package. This file should only
3833: be used when the packages that will use the file are known in advance. For
3834: other purposes it is often better to write a *.mk file and give it a good
3835: name that describes what it does.
3836:
3837: buildlink3.mk
3838:
3839: This file contains the dependency information for the buildlink3 framework
1.6 rillig 3840: (see Chapter 14, Buildlink methodology).
1.1 dsieger 3841:
3842: hacks.mk
3843:
3844: This file contains workarounds for compiler bugs and similar things. It is
3845: included automatically by the pkgsrc infrastructure, so you don't need an
3846: extra .include line for it.
3847:
3848: options.mk
3849:
3850: This file contains the code for the package-specific options (see
1.6 rillig 3851: Chapter 16, Options handling) that can be selected by the user. If a
1.1 dsieger 3852: package has only one or two options, it is equally acceptable to put the
3853: code directly into the Makefile.
3854:
1.6 rillig 3855: 11.5.3. Files affecting nothing at all
1.1 dsieger 3856:
3857: README*
3858:
3859: These files do not take place in the creation of a package and thus are
3860: purely informative to the package developer.
3861:
3862: TODO
3863:
3864: This file contains things that need to be done to make the package even
3865: better.
3866:
1.6 rillig 3867: 11.6. work*
1.1 dsieger 3868:
3869: When you type make, the distribution files are unpacked into the directory
3870: denoted by WRKDIR. It can be removed by running make clean. Besides the
3871: sources, this directory is also used to keep various timestamp files. The
3872: directory gets removed completely on clean. The default is ${.CURDIR}/work or $
3873: {.CURDIR}/work.${MACHINE_ARCH} if OBJMACHINE is set.
3874:
1.6 rillig 3875: 11.7. files/*
1.1 dsieger 3876:
3877: If you have any files that you wish to be placed in the package prior to
3878: configuration or building, you could place these files here and use a ${CP}
3879: command in the "pre-configure" target to achieve this. Alternatively, you could
3880: simply diff the file against /dev/null and use the patch mechanism to manage
3881: the creation of this file.
3882:
3883: If you want to share files in this way with other packages, set the FILESDIR
3884: variable to point to the other package's files directory, e.g.:
3885:
3886: FILESDIR=${.CURDIR}/../xemacs/files
3887:
1.6 rillig 3888: Chapter 12. Programming in Makefiles
1.1 dsieger 3889:
3890: Table of Contents
3891:
1.6 rillig 3892: 12.1. Caveats
3893: 12.2. Makefile variables
1.1 dsieger 3894:
1.6 rillig 3895: 12.2.1. Naming conventions
1.1 dsieger 3896:
1.6 rillig 3897: 12.3. Code snippets
1.1 dsieger 3898:
1.6 rillig 3899: 12.3.1. Adding things to a list
3900: 12.3.2. Converting an internal list into an external list
3901: 12.3.3. Passing variables to a shell command
3902: 12.3.4. Quoting guideline
3903: 12.3.5. Workaround for a bug in BSD Make
1.1 dsieger 3904:
3905: Pkgsrc consists of many Makefile fragments, each of which forms a well-defined
3906: part of the pkgsrc system. Using the make(1) system as a programming language
3907: for a big system like pkgsrc requires some discipline to keep the code correct
3908: and understandable.
3909:
3910: The basic ingredients for Makefile programming are variables (which are
3911: actually macros) and shell commands. Among these shell commands may even be
3912: more complex ones like awk(1) programs. To make sure that every shell command
3913: runs as intended it is necessary to quote all variables correctly when they are
3914: used.
3915:
3916: This chapter describes some patterns, that appear quite often in Makefiles,
3917: including the pitfalls that come along with them.
3918:
1.6 rillig 3919: 12.1. Caveats
1.1 dsieger 3920:
3921: * When you are creating a file as a target of a rule, always write the data
3922: to a temporary file first and finally rename that file. Otherwise there
3923: might occur an error in the middle of generating the file, and when the
3924: user runs make(1) for the second time, the file exists and will not be
3925: regenerated properly. Example:
3926:
3927: wrong:
3928: @echo "line 1" > ${.TARGET}
3929: @echo "line 2" >> ${.TARGET}
3930: @false
3931:
3932: correct:
3933: @echo "line 1" > ${.TARGET}.tmp
3934: @echo "line 2" >> ${.TARGET}.tmp
3935: @false
3936: @mv ${.TARGET}.tmp ${.TARGET}
3937:
3938: When you run make wrong twice, the file wrong will exist, although there
3939: was an error message in the first run. On the other hand, running make
3940: correct gives an error message twice, as expected.
3941:
3942: You might remember that make(1) sometimes removes ${.TARGET} in case of
3943: error, but this only happens when it is interrupted, for example by
3944: pressing ^C. This does not happen when one of the commands fails (like
3945: false(1) above).
3946:
1.6 rillig 3947: 12.2. Makefile variables
1.1 dsieger 3948:
3949: Makefile variables contain strings that can be processed using the five
3950: operators ``='', ``+='', ``?='', ``:='', and ``!='', which are described in the
3951: make(1) man page.
3952:
3953: When a variable's value is parsed from a Makefile, the hash character ``#'' and
3954: the backslash character ``\'' are handled specially. If a backslash is followed
3955: by a newline, any whitespace immediately in front of the backslash, the
3956: backslash, the newline, and any whitespace immediately behind the newline are
3957: replaced with a single space. A backslash character and an immediately
3958: following hash character are replaced with a single hash character. Otherwise,
3959: the backslash is passed as is. In a variable assignment, any hash character
3960: that is not preceded by a backslash starts a comment that continues upto the
3961: end of the logical line.
3962:
3963: Note: Because of this parsing algorithm the only way to create a variable
3964: consisting of a single backslash is using the ``!='' operator, for example:
3965: BACKSLASH!=echo "\\".
3966:
3967: So far for defining variables. The other thing you can do with variables is
3968: evaluating them. A variable is evaluated when it is part of the right side of
3969: the ``:='' or the ``!='' operator, or directly before executing a shell command
3970: which the variable is part of. In all other cases, make(1) performs lazy
3971: evaluation, that is, variables are not evaluated until there's no other way.
3972: The ``modifiers'' mentioned in the man page also evaluate the variable.
3973:
3974: Some of the modifiers split the string into words and then operate on the
3975: words, others operate on the string as a whole. When a string is split into
3976: words, it is split as you would expect it from sh(1).
3977:
3978: No rule without exception?the .for loop does not follow the shell quoting rules
3979: but splits at sequences of whitespace.
3980:
3981: There are several types of variables that should be handled differently.
3982: Strings and two types of lists.
3983:
3984: * Strings can contain arbitrary characters. Nevertheless, you should restrict
3985: yourself to only using printable characters. Examples are PREFIX and
3986: COMMENT.
3987:
3988: * Internal lists are lists that are never exported to any shell command.
3989: Their elements are separated by whitespace. Therefore, the elements
3990: themselves cannot have embedded whitespace. Any other characters are
3991: allowed. Internal lists can be used in .for loops. Examples are DEPENDS and
3992: BUILD_DEPENDS.
3993:
3994: * External lists are lists that may be exported to a shell command. Their
3995: elements can contain any characters, including whitespace. That's why they
3996: cannot be used in .for loops. Examples are DISTFILES and MASTER_SITES.
3997:
1.6 rillig 3998: 12.2.1. Naming conventions
1.1 dsieger 3999:
4000: * All variable names starting with an underscore are reserved for use by the
4001: pkgsrc infrastructure. They shall not be used by package Makefiles.
4002:
4003: * In .for loops you should use lowercase variable names for the iteration
4004: variables.
4005:
4006: * All list variables should have a ``plural'' name, e.g. PKG_OPTIONS or
4007: DISTFILES.
4008:
1.6 rillig 4009: 12.3. Code snippets
1.1 dsieger 4010:
4011: This section presents you with some code snippets you should use in your own
4012: code. If you don't find anything appropriate here, you should test your code
4013: and add it here.
4014:
1.6 rillig 4015: 12.3.1. Adding things to a list
1.1 dsieger 4016:
4017: STRING= foo * bar `date`
4018: INT_LIST= # empty
4019: ANOTHER_INT_LIST= apache-[0-9]*:../../www/apache
4020: EXT_LIST= # empty
4021: ANOTHER_EXT_LIST= a=b c=d
4022:
4023: INT_LIST+= ${STRING} # 1
4024: INT_LIST+= ${ANOTHER_INT_LIST} # 2
4025: EXT_LIST+= ${STRING:Q} # 3
4026: EXT_LIST+= ${ANOTHER_EXT_LIST} # 4
4027:
4028: When you add a string to an external list (example 3), it must be quoted. In
4029: all other cases, you must not add a quoting level. You must not merge internal
4030: and external lists, unless you are sure that all entries are correctly
4031: interpreted in both lists.
4032:
1.6 rillig 4033: 12.3.2. Converting an internal list into an external list
1.1 dsieger 4034:
4035: EXT_LIST= # empty
4036: .for i in ${INT_LIST}
4037: EXT_LIST+= ${i:Q}""
4038: .endfor
4039:
4040: This code converts the internal list INT_LIST into the external list EXT_LIST.
4041: As the elements of an internal list are unquoted they must be quoted here. The
4042: reason for appending "" is explained below.
4043:
1.6 rillig 4044: 12.3.3. Passing variables to a shell command
1.1 dsieger 4045:
4046: Sometimes you may want to print an arbitrary string. There are many ways to get
4047: it wrong and only few that can handle every nastiness.
4048:
4049: STRING= foo bar < > * `date` $$HOME ' "
4050: EXT_LIST= string=${STRING:Q} x=second\ item
4051:
4052: all:
4053: echo ${STRING} # 1
4054: echo "${STRING}" # 2
4055: echo "${STRING:Q}" # 3
4056: echo ${STRING:Q} # 4
4057: echo x${STRING:Q} | sed 1s,.,, # 5
4058: printf "%s\\n" ${STRING:Q}"" # 6
4059: env ${EXT_LIST} /bin/sh -c 'echo "$$string"; echo "$$x"'
4060:
4061: Example 1 leads to a syntax error in the shell, as the characters are just
4062: copied.
4063:
4064: Example 2 leads to a syntax error too, and if you leave out the last "
4065: character from ${STRING}, date(1) will be executed. The $HOME shell variable
4066: would be evaluated, too.
4067:
4068: Example 3 outputs each space character preceded by a backslash (or not),
4069: depending on the implementation of the echo(1) command.
4070:
4071: Example 4 handles correctly every string that does not start with a dash. In
4072: that case, the result depends on the implementation of the echo(1) command. As
4073: long as you can guarantee that your input does not start with a dash, this form
4074: is appropriate.
4075:
4076: Example 5 handles even the case of a leading dash correctly.
4077:
4078: Example 6 also works with every string and is the light-weight solution, since
4079: it does not involve a pipe, which has its own problems.
4080:
4081: The EXT_LIST does not need to be quoted because the quoting has already been
4082: done when adding elements to the list.
4083:
4084: As internal lists shall not be passed to the shell, there is no example for it.
4085:
1.6 rillig 4086: 12.3.4. Quoting guideline
1.1 dsieger 4087:
4088: There are many possible sources of wrongly quoted variables. This section lists
4089: some of the commonly known ones.
4090:
4091: * Whenever you use the value of a list, think about what happens to leading
4092: or trailing whitespace. If the list is a well-formed shell expression, you
4093: can apply the :M* modifier to strip leading and trailing whitespace from
4094: each word. The :M operator first splits its argument according to the rules
4095: of the shell, and then creates a new list consisting of all words that
4096: match the shell glob expression *, that is: all. One class of situations
4097: where this is needed is when adding a variable like CPPFLAGS to
4098: CONFIGURE_ARGS. If the configure script invokes other configure scripts, it
4099: strips the leading and trailing whitespace from the variable and then
4100: passes it to the other configure scripts. But these configure scripts
4101: expect the (child) CPPFLAGS variable to be the same as the parent CPPFLAGS.
4102: That's why we better pass the CPPFLAGS value properly trimmed. And here is
4103: how we do it:
4104:
4105: CPPFLAGS= # empty
4106: CPPFLAGS+= -Wundef -DPREFIX=\"${PREFIX:Q}\"
4107: CPPFLAGS+= ${MY_CPPFLAGS}
4108:
4109: CONFIGURE_ARGS+= CPPFLAGS=${CPPFLAGS:M*:Q}
4110:
4111: all:
4112: echo x${CPPFLAGS:Q}x # leading and trailing whitespace
4113: echo x${CONFIGURE_ARGS}x # properly trimmed
4114:
4115: * The example above contains one bug: The ${PREFIX} is a properly quoted
4116: shell expression, but there is the C compiler after it, which also expects
4117: a properly quoted string (this time in C syntax). The version above is
4118: therefore only correct if ${PREFIX} does not have embedded backslashes or
4119: double quotes. If you want to allow these, you have to add another layer of
4120: quoting to each variable that is used as a C string literal. You cannot use
4121: the :Q operator for it, as this operator only works for the shell.
4122:
4123: * Whenever a variable can be empty, the :Q operator can have surprising
4124: results. Here are two completely different cases which can be solved with
4125: the same trick.
4126:
4127: EMPTY= # empty
4128: empty_test:
4129: for i in a ${EMPTY:Q} c; do \
4130: echo "$$i"; \
4131: done
4132:
4133: for_test:
4134: .for i in a:\ a:\test.txt
4135: echo ${i:Q}
4136: echo "foo"
4137: .endfor
4138:
4139: The first example will only print two of the three lines we might have
4140: expected. This is because ${EMPTY:Q} expands to the empty string, which the
4141: shell cannot see. The workaround is to write ${EMPTY:Q}"". This pattern can
4142: be often found as ${TEST} -z ${VAR:Q} or as ${TEST} -f ${FNAME:Q} (both of
4143: these are wrong).
4144:
4145: The second example will only print three lines instead of four. The first
4146: line looks like a:\ echo foo. This is because the backslash of the value a:
4147: \ is interpreted as a line-continuation by make(1), which makes the second
4148: line the arguments of the echo(1) command from the first line. To avoid
4149: this, write ${i:Q}"".
4150:
1.6 rillig 4151: 12.3.5. Workaround for a bug in BSD Make
1.1 dsieger 4152:
4153: The pkgsrc bmake program does not handle the following assignment correctly. In
4154: case _othervar_ contains a ``-'' character, one of the closing braces is
4155: included in ${VAR} after this code executes.
4156:
4157: VAR:= ${VAR:N${_othervar_:C/-//}}
4158:
4159: For a more complex code snippet and a workaround, see the package regress/
4160: make-quoting, testcase bug1.
4161:
1.6 rillig 4162: Chapter 13. PLIST issues
1.1 dsieger 4163:
4164: Table of Contents
4165:
1.6 rillig 4166: 13.1. RCS ID
4167: 13.2. Semi-automatic PLIST generation
4168: 13.3. Tweaking output of make print-PLIST
4169: 13.4. Variable substitution in PLIST
4170: 13.5. Man page compression
4171: 13.6. Changing PLIST source with PLIST_SRC
4172: 13.7. Platform-specific and differing PLISTs
4173: 13.8. Sharing directories between packages
1.1 dsieger 4174:
4175: The PLIST file contains a package's "packing list", i.e. a list of files that
4176: belong to the package (relative to the ${PREFIX} directory it's been installed
4177: in) plus some additional statements - see the pkg_create(1) man page for a full
4178: list. This chapter addresses some issues that need attention when dealing with
4179: the PLIST file (or files, see below!).
4180:
1.6 rillig 4181: 13.1. RCS ID
1.1 dsieger 4182:
4183: Be sure to add a RCS ID line as the first thing in any PLIST file you write:
4184:
1.2 rillig 4185: @comment $NetBSD$
1.1 dsieger 4186:
4187:
1.6 rillig 4188: 13.2. Semi-automatic PLIST generation
1.1 dsieger 4189:
4190: You can use the make print-PLIST command to output a PLIST that matches any new
1.6 rillig 4191: files since the package was extracted. See Section 17.17, "Other helpful
1.1 dsieger 4192: targets" for more information on this target.
4193:
1.6 rillig 4194: 13.3. Tweaking output of make print-PLIST
1.1 dsieger 4195:
1.6 rillig 4196: If you have used any of the *-dirs packages, as explained in Section 13.8,
1.1 dsieger 4197: "Sharing directories between packages", you may have noticed that make
4198: print-PLIST outputs a set of @comments instead of real @dirrm lines. You can
4199: also do this for specific directories and files, so that the results of that
4200: command are very close to reality. This helps a lot during the update of
4201: packages.
4202:
4203: The PRINT_PLIST_AWK variable takes a set of AWK patterns and actions that are
4204: used to filter the output of print-PLIST. You can append any chunk of AWK
4205: scripting you like to it, but be careful with quoting.
4206:
4207: For example, to get all files inside the libdata/foo directory removed from the
4208: resulting PLIST:
4209:
4210: PRINT_PLIST_AWK+= /^libdata\/foo/ { next; }
4211:
4212:
4213: And to get all the @dirrm lines referring to a specific (shared) directory
4214: converted to @comments:
4215:
4216: PRINT_PLIST_AWK+= /^@dirrm share\/specific/ { print "@comment " $$0; next; }
4217:
4218:
1.6 rillig 4219: 13.4. Variable substitution in PLIST
1.1 dsieger 4220:
4221: A number of variables are substituted automatically in PLISTs when a package is
4222: installed on a system. This includes the following variables:
4223:
4224: ${MACHINE_ARCH}, ${MACHINE_GNU_ARCH}
4225:
4226: Some packages like emacs and perl embed information about which
4227: architecture they were built on into the pathnames where they install their
4228: files. To handle this case, PLIST will be preprocessed before actually
4229: used, and the symbol "${MACHINE_ARCH}" will be replaced by what uname -p
4230: gives. The same is done if the string ${MACHINE_GNU_ARCH} is embedded in
4231: PLIST somewhere - use this on packages that have GNU autoconf-created
4232: configure scripts.
4233:
4234: Legacy note
4235:
4236: There used to be a symbol "$ARCH" that was replaced by the output of uname
4237: -m, but that's no longer supported and has been removed.
4238:
4239: ${OPSYS}, ${LOWER_OPSYS}, ${OS_VERSION}
4240:
4241: Some packages want to embed the OS name and version into some paths. To do
4242: this, use these variables in the PLIST:
4243:
1.42 asau 4244: + ${OPSYS} - output of "uname -s"
1.1 dsieger 4245:
1.42 asau 4246: + ${LOWER_OPSYS} - lowercase common name (eg. "solaris")
1.1 dsieger 4247:
1.42 asau 4248: + ${OS_VERSION} - "uname -r"
1.1 dsieger 4249:
4250: For a complete list of values which are replaced by default, please look in
4251: bsd.pkg.mk (and search for PLIST_SUBST).
4252:
4253: If you want to change other variables not listed above, you can add variables
4254: and their expansions to this variable in the following way, similar to
1.6 rillig 4255: MESSAGE_SUBST (see Section 11.5, "Optional files"):
1.1 dsieger 4256:
4257: PLIST_SUBST+= SOMEVAR="somevalue"
4258:
4259:
4260: This replaces all occurrences of "${SOMEVAR}" in the PLIST with "somevalue".
4261:
1.19 snj 4262: The PLIST_VARS variable can be used to simplify the common case of
4263: conditionally including some PLIST entries. It can be done by adding
4264: PLIST_VARS+=foo and setting the corresponding PLIST.foo variable to yes if the
4265: entry should be included. This will substitute "${PLIST.foo}" in the PLIST with
4266: either """" or ""@comment "". For example, in Makefile:
1.18 mishka 4267:
4268: PLIST_VARS+= foo
4269: .if condition
4270: PLIST.foo= yes
4271: .else
4272:
4273:
4274: And then in PLIST:
4275:
4276: @comment $NetBSD$
4277: bin/bar
4278: man/man1/bar.1
4279: ${PLIST.foo}bin/foo
4280: ${PLIST.foo}man/man1/foo.1
4281: ${PLIST.foo}share/bar/foo.data
4282: ${PLIST.foo}@dirrm share/bar
4283:
4284:
1.6 rillig 4285: 13.5. Man page compression
1.1 dsieger 4286:
4287: Man pages should be installed in compressed form if MANZ is set (in
4288: bsd.own.mk), and uncompressed otherwise. To handle this in the PLIST file, the
4289: suffix ".gz" is appended/removed automatically for man pages according to MANZ
4290: and MANCOMPRESSED being set or not, see above for details. This modification of
4291: the PLIST file is done on a copy of it, not PLIST itself.
4292:
1.6 rillig 4293: 13.6. Changing PLIST source with PLIST_SRC
1.1 dsieger 4294:
4295: To use one or more files as source for the PLIST used in generating the binary
4296: package, set the variable PLIST_SRC to the names of that file(s). The files are
4297: later concatenated using cat(1), and the order of things is important. The
4298: default for PLIST_SRC is ${PKGDIR}/PLIST.
4299:
1.6 rillig 4300: 13.7. Platform-specific and differing PLISTs
1.1 dsieger 4301:
4302: Some packages decide to install a different set of files based on the operating
4303: system being used. These differences can be automatically handled by using the
4304: following files:
4305:
4306: * PLIST.common
4307:
4308: * PLIST.${OPSYS}
4309:
4310: * PLIST.${MACHINE_ARCH}
4311:
4312: * PLIST.${OPSYS}-${MACHINE_ARCH}
4313:
4314: * PLIST.common_end
4315:
1.6 rillig 4316: 13.8. Sharing directories between packages
1.1 dsieger 4317:
4318: A "shared directory" is a directory where multiple (and unrelated) packages
1.23 jakllsch 4319: install files. These directories were problematic because you had to add
1.1 dsieger 4320: special tricks in the PLIST to conditionally remove them, or have some
4321: centralized package handle them.
4322:
1.23 jakllsch 4323: In pkgsrc, it is now easy: Each package should create directories and install
4324: files as needed; pkg_delete will remove any directories left empty after
4325: uninstalling a package.
1.1 dsieger 4326:
1.23 jakllsch 4327: If a package needs an empty directory to work, create the directory during
4328: installation as usual, and also add an entry to the PLIST:
1.1 dsieger 4329:
1.23 jakllsch 4330: @pkgdir path/to/empty/directory
1.1 dsieger 4331:
4332:
1.6 rillig 4333: Chapter 14. Buildlink methodology
1.1 dsieger 4334:
4335: Table of Contents
4336:
1.6 rillig 4337: 14.1. Converting packages to use buildlink3
4338: 14.2. Writing buildlink3.mk files
1.1 dsieger 4339:
1.6 rillig 4340: 14.2.1. Anatomy of a buildlink3.mk file
1.27 wiz 4341: 14.2.2. Updating BUILDLINK_API_DEPENDS.pkg and BUILDLINK_ABI_DEPENDS.pkg in
4342: buildlink3.mk files
1.1 dsieger 4343:
1.6 rillig 4344: 14.3. Writing builtin.mk files
1.1 dsieger 4345:
1.6 rillig 4346: 14.3.1. Anatomy of a builtin.mk file
4347: 14.3.2. Global preferences for native or pkgsrc software
1.1 dsieger 4348:
4349: Buildlink is a framework in pkgsrc that controls what headers and libraries are
4350: seen by a package's configure and build processes. This is implemented in a two
4351: step process:
4352:
4353: 1. Symlink headers and libraries for dependencies into BUILDLINK_DIR, which by
4354: default is a subdirectory of WRKDIR.
4355:
4356: 2. Create wrapper scripts that are used in place of the normal compiler tools
4357: that translate -I${LOCALBASE}/include and -L${LOCALBASE}/lib into
4358: references to BUILDLINK_DIR. The wrapper scripts also make native compiler
4359: on some operating systems look like GCC, so that packages that expect GCC
4360: won't require modifications to build with those native compilers.
4361:
4362: This normalizes the environment in which a package is built so that the package
4363: may be built consistently despite what other software may be installed. Please
4364: note that the normal system header and library paths, e.g. /usr/include, /usr/
4365: lib, etc., are always searched -- buildlink3 is designed to insulate the
4366: package build from non-system-supplied software.
4367:
1.6 rillig 4368: 14.1. Converting packages to use buildlink3
1.1 dsieger 4369:
1.25 wiz 4370: The process of converting packages to use the buildlink3 framework ("bl3ifying"
4371: ) is fairly straightforward. The things to keep in mind are:
1.1 dsieger 4372:
4373: 1. Ensure that the build always calls the wrapper scripts instead of the
4374: actual toolchain. Some packages are tricky, and the only way to know for
4375: sure is the check ${WRKDIR}/.work.log to see if the wrappers are being
4376: invoked.
4377:
4378: 2. Don't override PREFIX from within the package Makefile, e.g. Java VMs,
4379: standalone shells, etc., because the code to symlink files into $
4380: {BUILDLINK_DIR} looks for files relative to "pkg_info -qp pkgname".
4381:
4382: 3. Remember that only the buildlink3.mk files that you list in a package's
4383: Makefile are added as dependencies for that package.
4384:
4385: If a dependency on a particular package is required for its libraries and
4386: headers, then we replace:
4387:
4388: DEPENDS+= foo>=1.1.0:../../category/foo
4389:
4390: with
4391:
4392: .include "../../category/foo/buildlink3.mk"
4393:
4394: The buildlink3.mk files usually define the required dependencies. If you need a
4395: newer version of the dependency when using buildlink3.mk files, then you can
4396: define it in your Makefile; for example:
4397:
4398: BUILDLINK_API_DEPENDS.foo+= foo>=1.1.0
4399: .include "../../category/foo/buildlink3.mk"
4400:
4401: There are several buildlink3.mk files in pkgsrc/mk that handle special package
4402: issues:
4403:
4404: * bdb.buildlink3.mk chooses either the native or a pkgsrc Berkeley DB
4405: implementation based on the values of BDB_ACCEPTED and BDB_DEFAULT.
4406:
4407: * curses.buildlink3.mk: If the system comes with neither Curses nor NCurses,
4408: this will take care to install the devel/ncurses package.
4409:
4410: * krb5.buildlink3.mk uses the value of KRB5_ACCEPTED to choose between adding
4411: a dependency on Heimdal or MIT-krb5 for packages that require a Kerberos 5
4412: implementation.
4413:
4414: * motif.buildlink3.mk checks for a system-provided Motif installation or adds
1.46 obache 4415: a dependency on x11/lesstif, x11/motif or x11/openmotif. The user can set
4416: MOTIF_TYPE to "dt", "lesstif", "motif" or "openmotif" to choose which Motif
4417: version will be used.
1.1 dsieger 4418:
1.57 wiz 4419: * readline.buildlink3.mk checks for a system-provided GNU readline or
4420: editline (libedit) installation, or adds a dependency on devel/readline,
4421: devel/editline. The user can set READLINE_DEFAULT to choose readline
1.56 ryoon 4422: implementation. If your package really needs GNU readline library, its
4423: Makefile should include devel/readline/buildlink3.mk instead of
4424: readline.buildlink3.mk.
4425:
1.1 dsieger 4426: * oss.buildlink3.mk defines several variables that may be used by packages
4427: that use the Open Sound System (OSS) API.
4428:
1.36 wiz 4429: * pgsql.buildlink3.mk will accept any of the Postgres versions in the
4430: variable PGSQL_VERSIONS_ACCEPTED and default to the version
4431: PGSQL_VERSION_DEFAULT. See the file for more information.
1.1 dsieger 4432:
4433: * pthread.buildlink3.mk uses the value of PTHREAD_OPTS and checks for native
4434: pthreads or adds a dependency on devel/pth as needed.
4435:
4436: * xaw.buildlink3.mk uses the value of XAW_TYPE to choose a particular Athena
4437: widgets library.
4438:
4439: The comments in those buildlink3.mk files provide a more complete description
4440: of how to use them properly.
4441:
1.6 rillig 4442: 14.2. Writing buildlink3.mk files
1.1 dsieger 4443:
4444: A package's buildlink3.mk file is included by Makefiles to indicate the need to
4445: compile and link against header files and libraries provided by the package. A
4446: buildlink3.mk file should always provide enough information to add the correct
4447: type of dependency relationship and include any other buildlink3.mk files that
4448: it needs to find headers and libraries that it needs in turn.
4449:
4450: To generate an initial buildlink3.mk file for further editing, Rene Hexel's
4451: pkgtools/createbuildlink package is highly recommended. For most packages, the
4452: following command will generate a good starting point for buildlink3.mk files:
4453:
4454: % cd pkgsrc/category/pkgdir
4455: % createbuildlink >buildlink3.mk
4456:
4457:
1.6 rillig 4458: 14.2.1. Anatomy of a buildlink3.mk file
1.1 dsieger 4459:
4460: The following real-life example buildlink3.mk is taken from pkgsrc/graphics/
4461: tiff:
4462:
1.19 snj 4463: # $NetBSD: buildlink3.mk,v 1.16 2009/03/20 19:24:45 joerg Exp $
1.1 dsieger 4464:
1.19 snj 4465: BUILDLINK_TREE+= tiff
1.1 dsieger 4466:
1.19 snj 4467: .if !defined(TIFF_BUILDLINK3_MK)
4468: TIFF_BUILDLINK3_MK:=
1.1 dsieger 4469:
1.19 snj 4470: BUILDLINK_API_DEPENDS.tiff+= tiff>=3.6.1
4471: BUILDLINK_ABI_DEPENDS.tiff+= tiff>=3.7.2nb1
1.1 dsieger 4472: BUILDLINK_PKGSRCDIR.tiff?= ../../graphics/tiff
4473:
4474: .include "../../devel/zlib/buildlink3.mk"
4475: .include "../../graphics/jpeg/buildlink3.mk"
1.19 snj 4476: .endif # TIFF_BUILDLINK3_MK
1.1 dsieger 4477:
1.19 snj 4478: BUILDLINK_TREE+= -tiff
1.1 dsieger 4479:
1.19 snj 4480: The header and footer manipulate BUILDLINK_TREE, which is common across all
4481: buildlink3.mk files and is used to track the dependency tree.
1.1 dsieger 4482:
1.19 snj 4483: The main section is protected from multiple inclusion and controls how the
1.1 dsieger 4484: dependency on pkg is added. Several important variables are set in the section:
4485:
4486: * BUILDLINK_API_DEPENDS.pkg is the actual dependency recorded in the
4487: installed package; this should always be set using += to ensure that we're
4488: appending to any pre-existing list of values. This variable should be set
1.27 wiz 4489: to the first version of the package that had an backwards-incompatible API
4490: change.
1.1 dsieger 4491:
4492: * BUILDLINK_PKGSRCDIR.pkg is the location of the pkg pkgsrc directory.
4493:
4494: * BUILDLINK_DEPMETHOD.pkg (not shown above) controls whether we use
4495: BUILD_DEPENDS or DEPENDS to add the dependency on pkg. The build dependency
4496: is selected by setting BUILDLINK_DEPMETHOD.pkg to "build". By default, the
4497: full dependency is used.
4498:
4499: * BUILDLINK_INCDIRS.pkg and BUILDLINK_LIBDIRS.pkg (not shown above) are lists
4500: of subdirectories of ${BUILDLINK_PREFIX.pkg} to add to the header and
4501: library search paths. These default to "include" and "lib" respectively.
4502:
4503: * BUILDLINK_CPPFLAGS.pkg (not shown above) is the list of preprocessor flags
4504: to add to CPPFLAGS, which are passed on to the configure and build phases.
4505: The "-I" option should be avoided and instead be handled using
4506: BUILDLINK_INCDIRS.pkg as above.
4507:
4508: The following variables are all optionally defined within this second section
4509: (protected against multiple inclusion) and control which package files are
4510: symlinked into ${BUILDLINK_DIR} and how their names are transformed during the
4511: symlinking:
4512:
4513: * BUILDLINK_FILES.pkg (not shown above) is a shell glob pattern relative to $
4514: {BUILDLINK_PREFIX.pkg} to be symlinked into ${BUILDLINK_DIR}, e.g. include/
4515: *.h.
4516:
4517: * BUILDLINK_FILES_CMD.pkg (not shown above) is a shell pipeline that outputs
4518: to stdout a list of files relative to ${BUILDLINK_PREFIX.pkg}. The
4519: resulting files are to be symlinked into ${BUILDLINK_DIR}. By default, this
4520: takes the +CONTENTS of a pkg and filters it through $
4521: {BUILDLINK_CONTENTS_FILTER.pkg}.
4522:
4523: * BUILDLINK_CONTENTS_FILTER.pkg (not shown above) is a filter command that
4524: filters +CONTENTS input into a list of files relative to $
4525: {BUILDLINK_PREFIX.pkg} on stdout. By default for overwrite packages,
4526: BUILDLINK_CONTENTS_FILTER.pkg outputs the contents of the include and lib
4527: directories in the package +CONTENTS, and for pkgviews packages, it outputs
4528: any libtool archives in lib directories.
4529:
4530: * BUILDLINK_FNAME_TRANSFORM.pkg (not shown above) is a list of sed arguments
4531: used to transform the name of the source filename into a destination
4532: filename, e.g. -e "s|/curses.h|/ncurses.h|g".
4533:
1.19 snj 4534: This section can additionally include any buildlink3.mk needed for pkg's
4535: library dependencies. Including these buildlink3.mk files means that the
4536: headers and libraries for these dependencies are also symlinked into $
4537: {BUILDLINK_DIR} whenever the pkg buildlink3.mk file is included. Dependencies
4538: are only added for directly include buildlink3.mk files.
1.1 dsieger 4539:
1.48 wiz 4540: When providing a buildlink3.mk and including other buildlink3.mk files in it,
1.51 wiz 4541: please only add necessary ones, i.e., those whose libraries or header files are
1.48 wiz 4542: automatically exposed when the package is use.
4543:
4544: In particular, if only an executable (bin/foo) is linked against a library,
4545: that library does not need to be propagated in the buildlink3.mk file.
4546:
4547: The following steps should help you decide if a buildlink3.mk file needs to be
4548: included:
4549:
4550: * Look at the installed header files: What headers do they include? The
4551: packages providing these files must be buildlinked.
4552:
1.50 wiz 4553: * Run ldd on all installed libraries and look against what other libraries
4554: they link. Some of the packages providing these probably need to be
4555: buildlinked; however, it's not automatic, since e.g. GTK on some systems
4556: pulls in the X libraries, so they will show up in the ldd output, while on
1.51 wiz 4557: others (like OS X) it won't. ldd output can thus only be used as a hint.
1.50 wiz 4558:
1.27 wiz 4559: 14.2.2. Updating BUILDLINK_API_DEPENDS.pkg and BUILDLINK_ABI_DEPENDS.pkg in
4560: buildlink3.mk files
1.1 dsieger 4561:
1.27 wiz 4562: These two variables differ in that one describes source compatibility (API) and
4563: the other binary compatibility (ABI). The difference is that a change in the
4564: API breaks compilation of programs while changes in the ABI stop compiled
4565: programs from running.
4566:
1.28 wiz 4567: Changes to the BUILDLINK_API_DEPENDS.pkg variable in a buildlink3.mk file
4568: happen very rarely. One possible reason is that all packages depending on this
4569: already need a newer version. In case it is bumped see the description below.
1.27 wiz 4570:
4571: The most common example of an ABI change is that the major version of a shared
4572: library is increased. In this case, BUILDLINK_ABI_DEPENDS.pkg should be
4573: adjusted to require at least the new package version. Then the packages that
4574: depend on this package need their PKGREVISIONs increased and, if they have
4575: buildlink3.mk files, their BUILDLINK_ABI_DEPENDS.pkg adjusted, too. This is
4576: needed so pkgsrc will require the correct package dependency and not settle for
4577: an older one when building the source.
1.1 dsieger 4578:
1.6 rillig 4579: See Section 19.1.6, "Handling dependencies" for more information about
1.1 dsieger 4580: dependencies on other packages, including the BUILDLINK_ABI_DEPENDS and
4581: ABI_DEPENDS definitions.
4582:
4583: Please take careful consideration before adjusting BUILDLINK_API_DEPENDS.pkg or
4584: BUILDLINK_ABI_DEPENDS.pkg as we don't want to cause unneeded package deletions
4585: and rebuilds. In many cases, new versions of packages work just fine with older
4586: dependencies.
4587:
4588: Also it is not needed to set BUILDLINK_ABI_DEPENDS.pkg when it is identical to
4589: BUILDLINK_API_DEPENDS.pkg.
4590:
1.6 rillig 4591: 14.3. Writing builtin.mk files
1.1 dsieger 4592:
4593: Some packages in pkgsrc install headers and libraries that coincide with
4594: headers and libraries present in the base system. Aside from a buildlink3.mk
4595: file, these packages should also include a builtin.mk file that includes the
4596: necessary checks to decide whether using the built-in software or the pkgsrc
4597: software is appropriate.
4598:
4599: The only requirements of a builtin.mk file for pkg are:
4600:
4601: 1. It should set USE_BUILTIN.pkg to either "yes" or "no" after it is included.
4602:
4603: 2. It should not override any USE_BUILTIN.pkg which is already set before the
4604: builtin.mk file is included.
4605:
4606: 3. It should be written to allow multiple inclusion. This is very important
4607: and takes careful attention to Makefile coding.
4608:
1.6 rillig 4609: 14.3.1. Anatomy of a builtin.mk file
1.1 dsieger 4610:
4611: The following is the recommended template for builtin.mk files:
4612:
4613: .if !defined(IS_BUILTIN.foo)
4614: #
4615: # IS_BUILTIN.foo is set to "yes" or "no" depending on whether "foo"
4616: # genuinely exists in the system or not.
4617: #
4618: IS_BUILTIN.foo?= no
4619:
4620: # BUILTIN_PKG.foo should be set here if "foo" is built-in and its package
4621: # version can be determined.
4622: #
4623: . if !empty(IS_BUILTIN.foo:M[yY][eE][sS])
4624: BUILTIN_PKG.foo?= foo-1.0
4625: . endif
4626: .endif # IS_BUILTIN.foo
4627:
4628: .if !defined(USE_BUILTIN.foo)
4629: USE_BUILTIN.foo?= ${IS_BUILTIN.foo}
4630: . if defined(BUILTIN_PKG.foo)
4631: . for _depend_ in ${BUILDLINK_API_DEPENDS.foo}
4632: . if !empty(USE_BUILTIN.foo:M[yY][eE][sS])
4633: USE_BUILTIN.foo!= \
4634: ${PKG_ADMIN} pmatch '${_depend_}' ${BUILTIN_PKG.foo} \
4635: && ${ECHO} "yes" || ${ECHO} "no"
4636: . endif
4637: . endfor
4638: . endif
4639: .endif # USE_BUILTIN.foo
4640:
4641: CHECK_BUILTIN.foo?= no
4642: .if !empty(CHECK_BUILTIN.foo:M[nN][oO])
4643: #
4644: # Here we place code that depends on whether USE_BUILTIN.foo is set to
4645: # "yes" or "no".
4646: #
4647: .endif # CHECK_BUILTIN.foo
4648:
4649: The first section sets IS_BUILTIN.pkg depending on if pkg really exists in the
4650: base system. This should not be a base system software with similar
4651: functionality to pkg; it should only be "yes" if the actual package is included
4652: as part of the base system. This variable is only used internally within the
4653: builtin.mk file.
4654:
4655: The second section sets BUILTIN_PKG.pkg to the version of pkg in the base
4656: system if it exists (if IS_BUILTIN.pkg is "yes"). This variable is only used
4657: internally within the builtin.mk file.
4658:
4659: The third section sets USE_BUILTIN.pkg and is required in all builtin.mk files.
4660: The code in this section must make the determination whether the built-in
4661: software is adequate to satisfy the dependencies listed in
4662: BUILDLINK_API_DEPENDS.pkg. This is typically done by comparing BUILTIN_PKG.pkg
1.25 wiz 4663: against each of the dependencies in BUILDLINK_API_DEPENDS.pkg. USE_BUILTIN.pkg
1.1 dsieger 4664: must be set to the correct value by the end of the builtin.mk file. Note that
4665: USE_BUILTIN.pkg may be "yes" even if IS_BUILTIN.pkg is "no" because we may make
4666: the determination that the built-in version of the software is similar enough
4667: to be used as a replacement.
4668:
4669: The last section is guarded by CHECK_BUILTIN.pkg, and includes code that uses
4670: the value of USE_BUILTIN.pkg set in the previous section. This typically
4671: includes, e.g., adding additional dependency restrictions and listing
4672: additional files to symlink into ${BUILDLINK_DIR} (via BUILDLINK_FILES.pkg).
4673:
1.6 rillig 4674: 14.3.2. Global preferences for native or pkgsrc software
1.1 dsieger 4675:
4676: When building packages, it's possible to choose whether to set a global
4677: preference for using either the built-in (native) version or the pkgsrc version
4678: of software to satisfy a dependency. This is controlled by setting
1.25 wiz 4679: PREFER_PKGSRC and PREFER_NATIVE. These variables take values of either "yes", "
4680: no", or a list of packages. PREFER_PKGSRC tells pkgsrc to use the pkgsrc
1.1 dsieger 4681: versions of software, while PREFER_NATIVE tells pkgsrc to use the built-in
4682: versions. Preferences are determined by the most specific instance of the
4683: package in either PREFER_PKGSRC or PREFER_NATIVE. If a package is specified in
4684: neither or in both variables, then PREFER_PKGSRC has precedence over
4685: PREFER_NATIVE. For example, to require using pkgsrc versions of software for
4686: all but the most basic bits on a NetBSD system, you can set:
4687:
4688: PREFER_PKGSRC= yes
4689: PREFER_NATIVE= getopt skey tcp_wrappers
4690:
4691: A package must have a builtin.mk file to be listed in PREFER_NATIVE, otherwise
4692: it is simply ignored in that list.
4693:
1.6 rillig 4694: Chapter 15. The pkginstall framework
1.1 dsieger 4695:
4696: Table of Contents
4697:
1.6 rillig 4698: 15.1. Files and directories outside the installation prefix
1.1 dsieger 4699:
1.6 rillig 4700: 15.1.1. Directory manipulation
4701: 15.1.2. File manipulation
1.1 dsieger 4702:
1.6 rillig 4703: 15.2. Configuration files
1.1 dsieger 4704:
1.6 rillig 4705: 15.2.1. How PKG_SYSCONFDIR is set
4706: 15.2.2. Telling the software where configuration files are
4707: 15.2.3. Patching installations
4708: 15.2.4. Disabling handling of configuration files
1.1 dsieger 4709:
1.6 rillig 4710: 15.3. System startup scripts
1.1 dsieger 4711:
1.6 rillig 4712: 15.3.1. Disabling handling of system startup scripts
1.1 dsieger 4713:
1.6 rillig 4714: 15.4. System users and groups
4715: 15.5. System shells
1.1 dsieger 4716:
1.6 rillig 4717: 15.5.1. Disabling shell registration
1.1 dsieger 4718:
1.6 rillig 4719: 15.6. Fonts
1.1 dsieger 4720:
1.6 rillig 4721: 15.6.1. Disabling automatic update of the fonts databases
1.1 dsieger 4722:
4723: This chapter describes the framework known as pkginstall, whose key features
4724: are:
4725:
4726: * Generic installation and manipulation of directories and files outside the
4727: pkgsrc-handled tree, LOCALBASE.
4728:
4729: * Automatic handling of configuration files during installation, provided
4730: that packages are correctly designed.
4731:
4732: * Generation and installation of system startup scripts.
4733:
4734: * Registration of system users and groups.
4735:
4736: * Registration of system shells.
4737:
4738: * Automatic updating of fonts databases.
4739:
4740: The following sections inspect each of the above points in detail.
4741:
4742: You may be thinking that many of the things described here could be easily done
4743: with simple code in the package's post-installation target (post-install). This
4744: is incorrect, as the code in them is only executed when building from source.
4745: Machines using binary packages could not benefit from it at all (as the code
4746: itself could be unavailable). Therefore, the only way to achieve any of the
4747: items described above is by means of the installation scripts, which are
4748: automatically generated by pkginstall.
4749:
1.6 rillig 4750: 15.1. Files and directories outside the installation prefix
1.1 dsieger 4751:
4752: As you already know, the PLIST file holds a list of files and directories that
4753: belong to a package. The names used in it are relative to the installation
4754: prefix (${PREFIX}), which means that it cannot register files outside this
4755: directory (absolute path names are not allowed). Despite this restriction, some
4756: packages need to install files outside this location; e.g., under ${VARBASE} or
4757: ${PKG_SYSCONFDIR}. The only way to achieve this is to create such files during
4758: installation time by using installation scripts.
4759:
4760: The generic installation scripts are shell scripts that can contain arbitrary
4761: code. The list of scripts to execute is taken from the INSTALL_FILE variable,
4762: which defaults to INSTALL. A similar variable exists for package removal
4763: (DEINSTALL_FILE, whose default is DEINSTALL). These scripts can run arbitrary
4764: commands, so they have the potential to create and manage files anywhere in the
4765: file system.
4766:
4767: Using these general installation files is not recommended, but may be needed in
4768: some special cases. One reason for avoiding them is that the user has to trust
4769: the packager that there is no unwanted or simply erroneous code included in the
4770: installation script. Also, previously there were many similar scripts for the
4771: same functionality, and fixing a common error involved finding and changing all
4772: of them.
4773:
4774: The pkginstall framework offers another, standardized way. It provides generic
4775: scripts to abstract the manipulation of such files and directories based on
4776: variables set in the package's Makefile. The rest of this section describes
4777: these variables.
4778:
1.6 rillig 4779: 15.1.1. Directory manipulation
1.1 dsieger 4780:
4781: The following variables can be set to request the creation of directories
4782: anywhere in the file system:
4783:
4784: * MAKE_DIRS and OWN_DIRS contain a list of directories that should be created
4785: and should attempt to be destroyed by the installation scripts. The
4786: difference between the two is that the latter prompts the administrator to
4787: remove any directories that may be left after deinstallation (because they
4788: were not empty), while the former does not.
4789:
4790: * MAKE_DIRS_PERMS and OWN_DIRS_PERMS contain a list of tuples describing
4791: which directories should be created and should attempt to be destroyed by
4792: the installation scripts. Each tuple holds the following values, separated
4793: by spaces: the directory name, its owner, its group and its numerical mode.
4794: For example:
4795:
4796: MAKE_DIRS_PERMS+= ${VARBASE}/foo/private ${ROOT_USER} ${ROOT_GROUP} 0700
4797:
4798: The difference between the two is exactly the same as their non-PERMS
4799: counterparts.
4800:
1.6 rillig 4801: 15.1.2. File manipulation
1.1 dsieger 4802:
4803: Creating non-empty files outside the installation prefix is tricky because the
4804: PLIST forces all files to be inside it. To overcome this problem, the only
4805: solution is to extract the file in the known place (i.e., inside the
4806: installation prefix) and copy it to the appropriate location during
4807: installation (done by the installation scripts generated by pkginstall). We
4808: will call the former the master file in the following paragraphs, which
4809: describe the variables that can be used to automatically and consistently
4810: handle files outside the installation prefix:
4811:
1.31 wiz 4812: * CONF_FILES and REQD_FILES are pairs of master and target files. During
1.1 dsieger 4813: installation time, the master file is copied to the target one if and only
4814: if the latter does not exist. Upon deinstallation, the target file is
4815: removed provided that it was not modified by the installation.
4816:
4817: The difference between the two is that the latter prompts the administrator
4818: to remove any files that may be left after deinstallation (because they
4819: were not empty), while the former does not.
4820:
1.31 wiz 4821: * CONF_FILES_PERMS and REQD_FILES_PERMS contain tuples describing master
1.1 dsieger 4822: files as well as their target locations. For each of them, it also
4823: specifies their owner, their group and their numeric permissions, in this
4824: order. For example:
4825:
1.31 wiz 4826: REQD_FILES_PERMS+= ${PREFIX}/share/somefile ${VARBASE}/somefile ${ROOT_USER} ${ROOT_GROUP} 0700
1.1 dsieger 4827:
4828: The difference between the two is exactly the same as their non-PERMS
4829: counterparts.
4830:
1.6 rillig 4831: 15.2. Configuration files
1.1 dsieger 4832:
4833: Configuration files are special in the sense that they are installed in their
4834: own specific directory, PKG_SYSCONFDIR, and need special treatment during
4835: installation (most of which is automated by pkginstall). The main concept you
4836: must bear in mind is that files marked as configuration files are automatically
4837: copied to the right place (somewhere inside PKG_SYSCONFDIR) during installation
4838: if and only if they didn't exist before. Similarly, they will not be removed if
4839: they have local modifications. This ensures that administrators never lose any
4840: custom changes they may have made.
4841:
1.6 rillig 4842: 15.2.1. How PKG_SYSCONFDIR is set
1.1 dsieger 4843:
4844: As said before, the PKG_SYSCONFDIR variable specifies where configuration files
4845: shall be installed. Its contents are set based upon the following variables:
4846:
4847: * PKG_SYSCONFBASE: The configuration's root directory. Defaults to ${PREFIX}/
4848: etc although it may be overridden by the user to point to his preferred
4849: location (e.g., /etc, /etc/pkg, etc.). Packages must not use it directly.
4850:
4851: * PKG_SYSCONFSUBDIR: A subdirectory of PKG_SYSCONFBASE under which the
4852: configuration files for the package being built shall be installed. The
4853: definition of this variable only makes sense in the package's Makefile
4854: (i.e., it is not user-customizable).
4855:
1.68 asau 4856: As an example, consider the Apache package, www/apache24, which places its
1.1 dsieger 4857: configuration files under the httpd/ subdirectory of PKG_SYSCONFBASE. This
4858: should be set in the package Makefile.
4859:
4860: * PKG_SYSCONFVAR: Specifies the name of the variable that holds this
4861: package's configuration directory (if different from PKG_SYSCONFBASE). It
4862: defaults to PKGBASE's value, and is always prefixed with PKG_SYSCONFDIR.
4863:
4864: * PKG_SYSCONFDIR.${PKG_SYSCONFVAR}: Holds the directory where the
4865: configuration files for the package identified by PKG_SYSCONFVAR's shall be
4866: placed.
4867:
4868: Based on the above variables, pkginstall determines the value of
4869: PKG_SYSCONFDIR, which is the only variable that can be used within a package to
4870: refer to its configuration directory. The algorithm used to set its value is
4871: basically the following:
4872:
4873: 1. If PKG_SYSCONFDIR.${PKG_SYSCONFVAR} is set, its value is used.
4874:
4875: 2. If the previous variable is not defined but PKG_SYSCONFSUBDIR is set in the
4876: package's Makefile, the resulting value is ${PKG_SYSCONFBASE}/$
4877: {PKG_SYSCONFSUBDIR}.
4878:
4879: 3. Otherwise, it is set to ${PKG_SYSCONFBASE}.
4880:
4881: It is worth mentioning that ${PKG_SYSCONFDIR} is automatically added to
1.16 jnemeth 4882: OWN_DIRS. See Section 15.1.1, "Directory manipulation" what this means. This
4883: does not apply to subdirectories of ${PKG_SYSCONFDIR}, they still have to be
4884: created with OWN_DIRS or MAKE_DIRS.
1.1 dsieger 4885:
1.6 rillig 4886: 15.2.2. Telling the software where configuration files are
1.1 dsieger 4887:
4888: Given that pkgsrc (and users!) expect configuration files to be in a known
4889: place, you need to teach each package where it shall install its files. In some
4890: cases you will have to patch the package Makefiles to achieve it. If you are
4891: lucky, though, it may be as easy as passing an extra flag to the configuration
4892: script; this is the case of GNU Autoconf- generated files:
4893:
4894: CONFIGURE_ARGS+= --sysconfdir=${PKG_SYSCONFDIR}
4895:
4896: Note that this specifies where the package has to look for its configuration
4897: files, not where they will be originally installed (although the difference is
4898: never explicit, unfortunately).
4899:
1.6 rillig 4900: 15.2.3. Patching installations
1.1 dsieger 4901:
4902: As said before, pkginstall automatically handles configuration files. This
4903: means that the packages themselves must not touch the contents of $
4904: {PKG_SYSCONFDIR} directly. Bad news is that many software installation scripts
4905: will, out of the box, mess with the contents of that directory. So what is the
4906: correct procedure to fix this issue?
4907:
4908: You must teach the package (usually by manually patching it) to install any
4909: configuration files under the examples hierarchy, share/examples/${PKGBASE}/.
4910: This way, the PLIST registers them and the administrator always has the
4911: original copies available.
4912:
4913: Once the required configuration files are in place (i.e., under the examples
4914: hierarchy), the pkginstall framework can use them as master copies during the
4915: package installation to update what is in ${PKG_SYSCONFDIR}. To achieve this,
4916: the variables CONF_FILES and CONF_FILES_PERMS are used. Check out
1.6 rillig 4917: Section 15.1.2, "File manipulation" for information about their syntax and
1.1 dsieger 4918: their purpose. Here is an example, taken from the mail/mutt package:
4919:
4920: EGDIR= ${PREFIX}/share/doc/mutt/samples
4921: CONF_FILES= ${EGDIR}/Muttrc ${PKG_SYSCONFDIR}/Muttrc
4922:
4923: Note that the EGDIR variable is specific to that package and has no meaning
4924: outside it.
4925:
1.6 rillig 4926: 15.2.4. Disabling handling of configuration files
1.1 dsieger 4927:
4928: The automatic copying of config files can be toggled by setting the environment
4929: variable PKG_CONFIG prior to package installation.
4930:
1.6 rillig 4931: 15.3. System startup scripts
1.1 dsieger 4932:
4933: System startup scripts are special files because they must be installed in a
4934: place known by the underlying OS, usually outside the installation prefix.
1.6 rillig 4935: Therefore, the same rules described in Section 15.1, "Files and directories
1.1 dsieger 4936: outside the installation prefix" apply, and the same solutions can be used.
4937: However, pkginstall provides a special mechanism to handle these files.
4938:
4939: In order to provide system startup scripts, the package has to:
4940:
4941: 1. Store the script inside ${FILESDIR}, with the .sh suffix appended.
4942: Considering the print/cups package as an example, it has a cupsd.sh in its
4943: files directory.
4944:
4945: 2. Tell pkginstall to handle it, appending the name of the script, without its
4946: extension, to the RCD_SCRIPTS variable. Continuing the previous example:
4947:
4948: RCD_SCRIPTS+= cupsd
4949:
4950: Once this is done, pkginstall will do the following steps for each script in an
4951: automated fashion:
4952:
4953: 1. Process the file found in the files directory applying all the
4954: substitutions described in the FILES_SUBST variable.
4955:
4956: 2. Copy the script from the files directory to the examples hierarchy, $
4957: {PREFIX}/share/examples/rc.d/. Note that this master file must be
4958: explicitly registered in the PLIST.
4959:
4960: 3. Add code to the installation scripts to copy the startup script from the
4961: examples hierarchy into the system-wide startup scripts directory.
4962:
1.6 rillig 4963: 15.3.1. Disabling handling of system startup scripts
1.1 dsieger 4964:
4965: The automatic copying of config files can be toggled by setting the environment
4966: variable PKG_RCD_SCRIPTS prior to package installation. Note that the scripts
4967: will be always copied inside the examples hierarchy, ${PREFIX}/share/examples/
4968: rc.d/, no matter what the value of this variable is.
4969:
1.6 rillig 4970: 15.4. System users and groups
1.1 dsieger 4971:
4972: If a package needs to create special users and/or groups during installation,
4973: it can do so by using the pkginstall framework.
4974:
4975: Users can be created by adding entries to the PKG_USERS variable. Each entry
4976: has the following syntax:
4977:
4978: user:group
4979:
4980: Further specification of user details may be done by setting per-user
4981: variables. PKG_UID.user is the numeric UID for the user. PKG_GECOS.user is the
4982: user's description or comment. PKG_HOME.user is the user's home directory, and
4983: defaults to /nonexistent if not specified. PKG_SHELL.user is the user's shell,
4984: and defaults to /sbin/nologin if not specified.
4985:
4986: Similarly, groups can be created by adding entries to the PKG_GROUPS variable,
4987: whose syntax is:
4988:
4989: group
4990:
4991: The numeric GID of the group may be set by defining PKG_GID.group.
4992:
4993: If a package needs to create the users and groups at an earlier stage, then it
4994: can set USERGROUP_PHASE to either configure or build to indicate the phase
4995: before which the users and groups are created. In this case, the numeric UIDs
4996: and GIDs of the created users and groups are automatically hardcoded into the
4997: final installation scripts.
4998:
1.6 rillig 4999: 15.5. System shells
1.1 dsieger 5000:
5001: Packages that install system shells should register them in the shell database,
5002: /etc/shells, to make things easier to the administrator. This must be done from
5003: the installation scripts to keep binary packages working on any system.
5004: pkginstall provides an easy way to accomplish this task.
5005:
5006: When a package provides a shell interpreter, it has to set the PKG_SHELL
5007: variable to its absolute file name. This will add some hooks to the
5008: installation scripts to handle it. Consider the following example, taken from
5009: shells/zsh:
5010:
5011: PKG_SHELL= ${PREFIX}/bin/zsh
5012:
1.6 rillig 5013: 15.5.1. Disabling shell registration
1.1 dsieger 5014:
5015: The automatic registration of shell interpreters can be disabled by the
5016: administrator by setting the PKG_REGISTER_SHELLS environment variable to NO.
5017:
1.6 rillig 5018: 15.6. Fonts
1.1 dsieger 5019:
5020: Packages that install X11 fonts should update the database files that index the
5021: fonts within each fonts directory. This can easily be accomplished within the
5022: pkginstall framework.
5023:
5024: When a package installs X11 fonts, it must list the directories in which fonts
5025: are installed in the FONTS_DIRS.type variables, where type can be one of "ttf",
5026: "type1" or "x11". This will add hooks to the installation scripts to run the
5027: appropriate commands to update the fonts database files within each of those
5028: directories. For convenience, if the directory path is relative, it is taken to
5029: be relative to the package's installation prefix. Consider the following
5030: example, taken from fonts/dbz-ttf:
5031:
1.67 wiz 5032: FONTS_DIRS.ttf= ${PREFIX}/share/fonts/X11/TTF
1.1 dsieger 5033:
1.6 rillig 5034: 15.6.1. Disabling automatic update of the fonts databases
1.1 dsieger 5035:
5036: The automatic update of fonts databases can be disabled by the administrator by
5037: setting the PKG_UPDATE_FONTS_DB environment variable to NO.
5038:
1.6 rillig 5039: Chapter 16. Options handling
1.1 dsieger 5040:
5041: Table of Contents
5042:
1.6 rillig 5043: 16.1. Global default options
5044: 16.2. Converting packages to use bsd.options.mk
5045: 16.3. Option Names
1.7 rillig 5046: 16.4. Determining the options of dependencies
1.1 dsieger 5047:
5048: Many packages have the ability to be built to support different sets of
5049: features. bsd.options.mk is a framework in pkgsrc that provides generic
5050: handling of those options that determine different ways in which the packages
5051: can be built. It's possible for the user to specify exactly which sets of
5052: options will be built into a package or to allow a set of global default
5053: options apply.
5054:
1.7 rillig 5055: There are two broad classes of behaviors that one might want to control via
5056: options. One is whether some particular feature is enabled in a program that
5057: will be built anyway, often by including or not including a dependency on some
5058: other package. The other is whether or not an additional program will be built
5059: as part of the package. Generally, it is better to make a split package for
5060: such additional programs instead of using options, because it enables binary
5061: packages to be built which can then be added separately. For example, the foo
5062: package might have minimal dependencies (those packages without which foo
5063: doesn't make sense), and then the foo-gfoo package might include the GTK
5064: frontend program gfoo. This is better than including a gtk option to foo that
5065: adds gfoo, because either that option is default, in which case binary users
5066: can't get foo without gfoo, or not default, in which case they can't get gfoo.
5067: With split packages, they can install foo without having GTK, and later decide
5068: to install gfoo (pulling in GTK at that time). This is an advantage to source
5069: users too, avoiding the need for rebuilds.
5070:
5071: Plugins with widely varying dependencies should usually be split instead of
5072: options.
5073:
5074: It is often more work to maintain split packages, especially if the upstream
5075: package does not support this. The decision of split vs. option should be made
5076: based on the likelihood that users will want or object to the various pieces,
5077: the size of the dependencies that are included, and the amount of work.
5078:
5079: A further consideration is licensing. Non-free parts, or parts that depend on
5080: non-free dependencies (especially plugins) should almost always be split if
5081: feasible.
5082:
1.6 rillig 5083: 16.1. Global default options
1.1 dsieger 5084:
5085: Global default options are listed in PKG_DEFAULT_OPTIONS, which is a list of
5086: the options that should be built into every package if that option is
1.4 rillig 5087: supported. This variable should be set in mk.conf.
1.1 dsieger 5088:
1.6 rillig 5089: 16.2. Converting packages to use bsd.options.mk
1.1 dsieger 5090:
5091: The following example shows how bsd.options.mk should be used by the
5092: hypothetical ``wibble'' package, either in the package Makefile, or in a file,
5093: e.g. options.mk, that is included by the main package Makefile.
5094:
5095: PKG_OPTIONS_VAR= PKG_OPTIONS.wibble
5096: PKG_SUPPORTED_OPTIONS= wibble-foo ldap
5097: PKG_OPTIONS_OPTIONAL_GROUPS= database
5098: PKG_OPTIONS_GROUP.database= mysql pgsql
5099: PKG_SUGGESTED_OPTIONS= wibble-foo
5100: PKG_OPTIONS_LEGACY_VARS+= WIBBLE_USE_OPENLDAP:ldap
5101: PKG_OPTIONS_LEGACY_OPTS+= foo:wibble-foo
5102:
5103: .include "../../mk/bsd.prefs.mk"
5104:
5105: # this package was previously named wibble2
5106: .if defined(PKG_OPTIONS.wibble2)
5107: PKG_LEGACY_OPTIONS+= ${PKG_OPTIONS.wibble2}
5108: PKG_OPTIONS_DEPRECATED_WARNINGS+= \
5109: "Deprecated variable PKG_OPTIONS.wibble2 used, use ${PKG_OPTIONS_VAR} instead."
5110: .endif
5111:
5112: .include "../../mk/bsd.options.mk"
5113:
5114: # Package-specific option-handling
5115:
5116: ###
5117: ### FOO support
5118: ###
5119: .if !empty(PKG_OPTIONS:Mwibble-foo)
5120: CONFIGURE_ARGS+= --enable-foo
5121: .endif
5122:
5123: ###
5124: ### LDAP support
5125: ###
5126: .if !empty(PKG_OPTIONS:Mldap)
5127: . include "../../databases/openldap-client/buildlink3.mk"
5128: CONFIGURE_ARGS+= --enable-ldap=${BUILDLINK_PREFIX.openldap-client}
5129: .endif
5130:
5131: ###
5132: ### database support
5133: ###
5134: .if !empty(PKG_OPTIONS:Mmysql)
5135: . include "../../mk/mysql.buildlink3.mk"
5136: .endif
5137: .if !empty(PKG_OPTIONS:Mpgsql)
5138: . include "../../mk/pgsql.buildlink3.mk"
5139: .endif
5140:
5141: The first section contains the information about which build options are
5142: supported by the package, and any default options settings if needed.
5143:
5144: 1. PKG_OPTIONS_VAR is the name of the make(1) variable that the user can set
5145: to override the default options. It should be set to PKG_OPTIONS.pkgbase.
5146: Do not set it to PKG_OPTIONS.${PKGBASE}, since PKGBASE is not defined at
5147: the point where the options are processed.
5148:
5149: 2. PKG_SUPPORTED_OPTIONS is a list of build options supported by the package.
5150:
5151: 3. PKG_OPTIONS_OPTIONAL_GROUPS is a list of names of groups of mutually
5152: exclusive options. The options in each group are listed in
5153: PKG_OPTIONS_GROUP.groupname. The most specific setting of any option from
5154: the group takes precedence over all other options in the group. Options
5155: from the groups will be automatically added to PKG_SUPPORTED_OPTIONS.
5156:
5157: 4. PKG_OPTIONS_REQUIRED_GROUPS is like PKG_OPTIONS_OPTIONAL_GROUPS, but
5158: building the packages will fail if no option from the group is selected.
5159:
5160: 5. PKG_OPTIONS_NONEMPTY_SETS is a list of names of sets of options. At least
5161: one option from each set must be selected. The options in each set are
5162: listed in PKG_OPTIONS_SET.setname. Options from the sets will be
5163: automatically added to PKG_SUPPORTED_OPTIONS. Building the package will
5164: fail if no option from the set is selected.
5165:
5166: 6. PKG_SUGGESTED_OPTIONS is a list of build options which are enabled by
5167: default.
5168:
5169: 7. PKG_OPTIONS_LEGACY_VARS is a list of "USE_VARIABLE:option" pairs that map
1.4 rillig 5170: legacy mk.conf variables to their option counterparts. Pairs should be
1.1 dsieger 5171: added with "+=" to keep the listing of global legacy variables. A warning
5172: will be issued if the user uses a legacy variable.
5173:
5174: 8. PKG_OPTIONS_LEGACY_OPTS is a list of "old-option:new-option" pairs that map
5175: options that have been renamed to their new counterparts. Pairs should be
5176: added with "+=" to keep the listing of global legacy options. A warning
5177: will be issued if the user uses a legacy option.
5178:
5179: 9. PKG_LEGACY_OPTIONS is a list of options implied by deprecated variables
5180: used. This can be used for cases that neither PKG_OPTIONS_LEGACY_VARS nor
5181: PKG_OPTIONS_LEGACY_OPTS can handle, e. g. when PKG_OPTIONS_VAR is renamed.
5182:
5183: 10. PKG_OPTIONS_DEPRECATED_WARNINGS is a list of warnings about deprecated
5184: variables or options used, and what to use instead.
5185:
5186: A package should never modify PKG_DEFAULT_OPTIONS or the variable named in
5187: PKG_OPTIONS_VAR. These are strictly user-settable. To suggest a default set of
5188: options, use PKG_SUGGESTED_OPTIONS.
5189:
5190: PKG_OPTIONS_VAR must be defined before including bsd.options.mk. If none of
5191: PKG_SUPPORTED_OPTIONS, PKG_OPTIONS_OPTIONAL_GROUPS, and
5192: PKG_OPTIONS_REQUIRED_GROUPS are defined (as can happen with platform-specific
5193: options if none of them is supported on the current platform), PKG_OPTIONS is
5194: set to the empty list and the package is otherwise treated as not using the
5195: options framework.
5196:
5197: After the inclusion of bsd.options.mk, the variable PKG_OPTIONS contains the
5198: list of selected build options, properly filtered to remove unsupported and
5199: duplicate options.
5200:
5201: The remaining sections contain the logic that is specific to each option. The
5202: correct way to check for an option is to check whether it is listed in
5203: PKG_OPTIONS:
5204:
5205: .if !empty(PKG_OPTIONS:Moption)
5206:
1.6 rillig 5207: 16.3. Option Names
1.1 dsieger 5208:
5209: Options that enable similar features in different packages (like optional
5210: support for a library) should use a common name in all packages that support it
5211: (like the name of the library). If another package already has an option with
5212: the same meaning, use the same name.
5213:
5214: Options that enable features specific to one package, where it's unlikely that
5215: another (unrelated) package has the same (or a similar) optional feature,
5216: should use a name prefixed with pkgname-.
5217:
5218: If a group of related packages share an optional feature specific to that
5219: group, prefix it with the name of the "main" package (e. g.
5220: djbware-errno-hack).
5221:
5222: For new options, add a line to mk/defaults/options.description. Lines have two
5223: fields, separated by tab. The first field is the option name, the second its
5224: description. The description should be a whole sentence (starting with an
5225: uppercase letter and ending with a period) that describes what enabling the
5226: option does. E. g. "Enable ispell support." The file is sorted by option names.
5227:
1.7 rillig 5228: 16.4. Determining the options of dependencies
5229:
5230: When writing buildlink3.mk files, it is often necessary to list different
5231: dependencies based on the options with which the package was built. For
5232: querying these options, the file pkgsrc/mk/pkg-build-options.mk should be used.
5233: A typical example looks like this:
5234:
5235: pkgbase := libpurple
5236: .include "../../mk/pkg-build-options.mk"
5237:
5238: .if !empty(PKG_BUILD_OPTIONS.libpurple:Mdbus)
5239: ...
5240: .endif
5241:
5242: Including pkg-build-options.mk here will set the variable
5243: PKG_BUILD_OPTIONS.libpurple to the build options of the libpurple package,
5244: which can then be queried like PKG_OPTIONS in the options.mk file. See the file
5245: pkg-build-options.mk for more details.
5246:
1.6 rillig 5247: Chapter 17. The build process
1.1 dsieger 5248:
5249: Table of Contents
5250:
1.6 rillig 5251: 17.1. Introduction
5252: 17.2. Program location
5253: 17.3. Directories used during the build process
5254: 17.4. Running a phase
5255: 17.5. The fetch phase
5256:
5257: 17.5.1. What to fetch and where to get it from
5258: 17.5.2. How are the files fetched?
5259:
5260: 17.6. The checksum phase
5261: 17.7. The extract phase
5262: 17.8. The patch phase
5263: 17.9. The tools phase
5264: 17.10. The wrapper phase
5265: 17.11. The configure phase
5266: 17.12. The build phase
5267: 17.13. The test phase
5268: 17.14. The install phase
5269: 17.15. The package phase
5270: 17.16. Cleaning up
5271: 17.17. Other helpful targets
1.1 dsieger 5272:
1.6 rillig 5273: 17.1. Introduction
1.1 dsieger 5274:
5275: This chapter gives a detailed description on how a package is built. Building a
5276: package is separated into different phases (for example fetch, build, install),
1.19 snj 5277: all of which are described in the following sections. Each phase is split into
5278: so-called stages, which take the name of the containing phase, prefixed by one
5279: of pre-, do- or post-. (Examples are pre-configure, post-build.) Most of the
5280: actual work is done in the do-* stages.
1.1 dsieger 5281:
5282: Never override the regular targets (like fetch), if you have to, override the
5283: do-* ones instead.
5284:
5285: The basic steps for building a program are always the same. First the program's
5286: source (distfile) must be brought to the local system and then extracted. After
5287: any pkgsrc-specific patches to compile properly are applied, the software can
5288: be configured, then built (usually by compiling), and finally the generated
5289: binaries, etc. can be put into place on the system.
5290:
5291: To get more details about what is happening at each step, you can set the
5292: PKG_VERBOSE variable, or the PATCH_DEBUG variable if you are just interested in
5293: more details about the patch step.
5294:
1.6 rillig 5295: 17.2. Program location
1.1 dsieger 5296:
5297: Before outlining the process performed by the NetBSD package system in the next
5298: section, here's a brief discussion on where programs are installed, and which
5299: variables influence this.
5300:
5301: The automatic variable PREFIX indicates where all files of the final program
5302: shall be installed. It is usually set to LOCALBASE (/usr/pkg), or CROSSBASE for
5303: pkgs in the cross category. The value of PREFIX needs to be put into the
5304: various places in the program's source where paths to these files are encoded.
1.6 rillig 5305: See Section 11.3, "patches/*" and Section 19.3.1, "Shared libraries - libtool"
1.1 dsieger 5306: for more details.
5307:
5308: When choosing which of these variables to use, follow the following rules:
5309:
5310: * PREFIX always points to the location where the current pkg will be
1.25 wiz 5311: installed. When referring to a pkg's own installation path, use "${PREFIX}"
5312: .
1.1 dsieger 5313:
5314: * LOCALBASE is where all non-X11 pkgs are installed. If you need to construct
5315: a -I or -L argument to the compiler to find includes and libraries
5316: installed by another non-X11 pkg, use "${LOCALBASE}". The name LOCALBASE
5317: stems from FreeBSD, which installed all packages in /usr/local. As pkgsrc
5318: leaves /usr/local for the system administrator, this variable is a
5319: misnomer.
5320:
5321: * X11BASE is where the actual X11 distribution (from xsrc, etc.) is
5322: installed. When looking for standard X11 includes (not those installed by a
5323: package), use "${X11BASE}".
5324:
5325: * X11-based packages are special in that they may be installed in either
5326: X11BASE or LOCALBASE.
5327:
5328: Usually, X11 packages should be installed under LOCALBASE whenever
5329: possible. Note that you will need to include ../../mk/x11.buildlink3.mk in
5330: them to request the presence of X11 and to get the right compilation flags.
5331:
5332: Even though, there are some packages that cannot be installed under
5333: LOCALBASE: those that come with app-defaults files. These packages are
5334: special and they must be placed under X11BASE. To accomplish this, set
5335: either USE_X11BASE or USE_IMAKE in your package.
5336:
5337: Some notes: If you need to find includes or libraries installed by a pkg
1.25 wiz 5338: that has USE_IMAKE or USE_X11BASE in its pkg Makefile, you need to look in
1.1 dsieger 5339: both ${X11BASE} and ${LOCALBASE}. To force installation of all X11 packages
5340: in LOCALBASE, the pkgtools/xpkgwedge package is enabled by default.
5341:
5342: * X11PREFIX should be used to refer to the installed location of an X11
5343: package. X11PREFIX will be set to X11BASE if xpkgwedge is not installed,
5344: and to LOCALBASE if xpkgwedge is installed.
5345:
5346: * If xpkgwedge is installed, it is possible to have some packages installed
5347: in X11BASE and some in LOCALBASE. To determine the prefix of an installed
5348: package, the EVAL_PREFIX definition can be used. It takes pairs in the
5349: format "DIRNAME=<package>", and the make(1) variable DIRNAME will be set to
5350: the prefix of the installed package <package>, or "${X11PREFIX}" if the
5351: package is not installed.
5352:
5353: This is best illustrated by example.
5354:
5355: The following lines are taken from pkgsrc/wm/scwm/Makefile:
5356:
5357: EVAL_PREFIX+= GTKDIR=gtk+
5358: CONFIGURE_ARGS+= --with-guile-prefix=${LOCALBASE:Q}
5359: CONFIGURE_ARGS+= --with-gtk-prefix=${GTKDIR:Q}
5360: CONFIGURE_ARGS+= --enable-multibyte
5361:
5362: Specific defaults can be defined for the packages evaluated using
5363: EVAL_PREFIX, by using a definition of the form:
5364:
5365: GTKDIR_DEFAULT= ${LOCALBASE}
5366:
5367: where GTKDIR corresponds to the first definition in the EVAL_PREFIX pair.
5368:
5369: * Within ${PREFIX}, packages should install files according to hier(7), with
5370: the exception that manual pages go into ${PREFIX}/man, not ${PREFIX}/share/
5371: man.
5372:
1.6 rillig 5373: 17.3. Directories used during the build process
1.1 dsieger 5374:
1.14 jmcneill 5375: When building a package, various directories are used to store source files,
1.1 dsieger 5376: temporary files, pkgsrc-internal files, and so on. These directories are
5377: explained here.
5378:
5379: Some of the directory variables contain relative pathnames. There are two
5380: common base directories for these relative directories: PKGSRCDIR/PKGPATH is
5381: used for directories that are pkgsrc-specific. WRKSRC is used for directories
5382: inside the package itself.
5383:
5384: PKGSRCDIR
5385:
5386: This is an absolute pathname that points to the pkgsrc root directory.
5387: Generally, you don't need it.
5388:
5389: PKGDIR
5390:
5391: This is an absolute pathname that points to the current package.
5392:
5393: PKGPATH
5394:
5395: This is a pathname relative to PKGSRCDIR that points to the current
5396: package.
5397:
5398: WRKDIR
5399:
5400: This is an absolute pathname pointing to the directory where all work takes
5401: place. The distfiles are extracted to this directory. It also contains
5402: temporary directories and log files used by the various pkgsrc frameworks,
5403: like buildlink or the wrappers.
5404:
5405: WRKSRC
5406:
5407: This is an absolute pathname pointing to the directory where the distfiles
5408: are extracted. It is usually a direct subdirectory of WRKDIR, and often
5409: it's the only directory entry that isn't hidden. This variable may be
5410: changed by a package Makefile.
5411:
1.14 jmcneill 5412: The CREATE_WRKDIR_SYMLINK definition takes either the value yes or no and
1.15 rillig 5413: defaults to no. It indicates whether a symbolic link to the WRKDIR is to be
1.14 jmcneill 5414: created in the pkgsrc entry's directory. If users would like to have their
5415: pkgsrc trees behave in a read-only manner, then the value of
5416: CREATE_WRKDIR_SYMLINK should be set to no.
5417:
1.6 rillig 5418: 17.4. Running a phase
1.1 dsieger 5419:
5420: You can run a particular phase by typing make phase, where phase is the name of
5421: the phase. This will automatically run all phases that are required for this
5422: phase. The default phase is build, that is, when you run make without
5423: parameters in a package directory, the package will be built, but not
5424: installed.
5425:
1.6 rillig 5426: 17.5. The fetch phase
1.1 dsieger 5427:
5428: The first step in building a package is to fetch the distribution files
1.25 wiz 5429: (distfiles) from the sites that are providing them. This is the task of the
1.1 dsieger 5430: fetch phase.
5431:
1.6 rillig 5432: 17.5.1. What to fetch and where to get it from
1.1 dsieger 5433:
5434: In simple cases, MASTER_SITES defines all URLs from where the distfile, whose
5435: name is derived from the DISTNAME variable, is fetched. The more complicated
5436: cases are described below.
5437:
5438: The variable DISTFILES specifies the list of distfiles that have to be fetched.
1.66 asau 5439: Its value defaults to ${DEFAULT_DISTFILES} and its value is ${DISTNAME}$
5440: {EXTRACT_SUFX}, so that most packages don't need to define it at all.
5441: EXTRACT_SUFX is .tar.gz by default, but can be changed freely. Note that if
5442: your package requires additional distfiles to the default one, you cannot just
5443: append the additional filenames using the += operator, but you have write for
5444: example:
1.1 dsieger 5445:
1.66 asau 5446: DISTFILES= ${DEFAULT_DISTFILES} additional-files.tar.gz
1.1 dsieger 5447:
5448: Each distfile is fetched from a list of sites, usually MASTER_SITES. If the
5449: package has multiple DISTFILES or multiple PATCHFILES from different sites, you
5450: can set SITES.distfile to the list of URLs where the file distfile (including
5451: the suffix) can be found.
5452:
5453: DISTFILES= ${DISTNAME}${EXTRACT_SUFX}
5454: DISTFILES+= foo-file.tar.gz
5455: SITES.foo-file.tar.gz= \
5456: http://www.somewhere.com/somehow/ \
5457: http://www.somewhereelse.com/mirror/somehow/
5458:
5459: When actually fetching the distfiles, each item from MASTER_SITES or SITES.*
5460: gets the name of each distfile appended to it, without an intermediate slash.
5461: Therefore, all site values have to end with a slash or other separator
5462: character. This allows for example to set MASTER_SITES to a URL of a CGI script
5463: that gets the name of the distfile as a parameter. In this case, the definition
5464: would look like:
5465:
5466: MASTER_SITES= http://www.example.com/download.cgi?file=
5467:
1.23 jakllsch 5468: The exception to this rule are URLs starting with a dash. In that case the URL
5469: is taken as is, fetched and the result stored under the name of the distfile.
1.66 asau 5470: You can use this style for the case when the download URL style does not match
5471: the above common case. For example, if permanent download URL is a redirector
5472: to the real download URL, or the download file name is offered by an HTTP
5473: Content-Disposition header. In the following example, foo-1.0.0.tar.gz will be
5474: created instead of the default v1.0.0.tar.gz.
5475:
5476: DISTNAME= foo-1.0.0
5477: MASTER_SITES= -http://www.example.com/archive/v1.0.0.tar.gz
1.23 jakllsch 5478:
1.1 dsieger 5479: There are some predefined values for MASTER_SITES, which can be used in
5480: packages. The names of the variables should speak for themselves.
5481:
5482: ${MASTER_SITE_APACHE}
5483: ${MASTER_SITE_BACKUP}
5484: ${MASTER_SITE_CYGWIN}
5485: ${MASTER_SITE_DEBIAN}
5486: ${MASTER_SITE_FREEBSD}
5487: ${MASTER_SITE_FREEBSD_LOCAL}
5488: ${MASTER_SITE_GENTOO}
5489: ${MASTER_SITE_GNOME}
5490: ${MASTER_SITE_GNU}
5491: ${MASTER_SITE_GNUSTEP}
1.66 asau 5492: ${MASTER_SITE_HASKELL_HACKAGE}
1.1 dsieger 5493: ${MASTER_SITE_IFARCHIVE}
5494: ${MASTER_SITE_KDE}
5495: ${MASTER_SITE_MOZILLA}
1.66 asau 5496: ${MASTER_SITE_MOZILLA_ALL}
5497: ${MASTER_SITE_MOZILLA_ESR}
1.1 dsieger 5498: ${MASTER_SITE_MYSQL}
1.66 asau 5499: ${MASTER_SITE_NETLIB}
1.1 dsieger 5500: ${MASTER_SITE_OPENOFFICE}
5501: ${MASTER_SITE_PERL_CPAN}
5502: ${MASTER_SITE_PGSQL}
1.66 asau 5503: ${MASTER_SITE_RUBYGEMS}
1.1 dsieger 5504: ${MASTER_SITE_R_CRAN}
5505: ${MASTER_SITE_SOURCEFORGE}
5506: ${MASTER_SITE_SOURCEFORGE_JP}
5507: ${MASTER_SITE_SUNSITE}
5508: ${MASTER_SITE_SUSE}
5509: ${MASTER_SITE_TEX_CTAN}
5510: ${MASTER_SITE_XCONTRIB}
5511: ${MASTER_SITE_XEMACS}
1.66 asau 5512: ${MASTER_SITE_XORG}
1.1 dsieger 5513:
5514: Some explanations for the less self-explaining ones: MASTER_SITE_BACKUP
5515: contains backup sites for packages that are maintained in ftp://ftp.NetBSD.org/
1.27 wiz 5516: pub/pkgsrc/distfiles/${DIST_SUBDIR}. MASTER_SITE_LOCAL contains local package
1.26 spz 5517: source distributions that are maintained in ftp://ftp.NetBSD.org/pub/pkgsrc/
5518: distfiles/LOCAL_PORTS/.
1.1 dsieger 5519:
5520: If you choose one of these predefined sites, you may want to specify a
5521: subdirectory of that site. Since these macros may expand to more than one
5522: actual site, you must use the following construct to specify a subdirectory:
5523:
5524: MASTER_SITES= ${MASTER_SITE_GNU:=subdirectory/name/}
5525: MASTER_SITES= ${MASTER_SITE_SOURCEFORGE:=project_name/}
5526:
5527: Note the trailing slash after the subdirectory name.
5528:
1.6 rillig 5529: 17.5.2. How are the files fetched?
1.1 dsieger 5530:
5531: The fetch phase makes sure that all the distfiles exist in a local directory
5532: (DISTDIR, which can be set by the pkgsrc user). If the files do not exist, they
5533: are fetched using commands of the form
5534:
5535: ${FETCH_CMD} ${FETCH_BEFORE_ARGS} ${site}${file} ${FETCH_AFTER_ARGS}
5536:
5537: where ${site} varies through several possibilities in turn: first,
5538: MASTER_SITE_OVERRIDE is tried, then the sites specified in either SITES.file if
5539: defined, else MASTER_SITES or PATCH_SITES, as applies, then finally the value
5540: of MASTER_SITE_BACKUP. The order of all except the first and the last can be
5541: optionally sorted by the user, via setting either MASTER_SORT_RANDOM, and
5542: MASTER_SORT_AWK or MASTER_SORT_REGEX.
5543:
1.16 jnemeth 5544: The specific command and arguments used depend on the FETCH_USING parameter.
5545: The example above is for FETCH_USING=custom.
5546:
1.1 dsieger 5547: The distfiles mirror run by the NetBSD Foundation uses the mirror-distfiles
5548: target to mirror the distfiles, if they are freely distributable. Packages
5549: setting NO_SRC_ON_FTP (usually to "${RESTRICTED}") will not have their
5550: distfiles mirrored.
5551:
1.6 rillig 5552: 17.6. The checksum phase
1.1 dsieger 5553:
5554: After the distfile(s) are fetched, their checksum is generated and compared
5555: with the checksums stored in the distinfo file. If the checksums don't match,
5556: the build is aborted. This is to ensure the same distfile is used for building,
5557: and that the distfile wasn't changed, e.g. by some malign force, deliberately
5558: changed distfiles on the master distribution site or network lossage.
5559:
1.6 rillig 5560: 17.7. The extract phase
1.1 dsieger 5561:
5562: When the distfiles are present on the local system, they need to be extracted,
5563: as they usually come in the form of some compressed archive format.
5564:
5565: By default, all DISTFILES are extracted. If you only need some of them, you can
5566: set the EXTRACT_ONLY variable to the list of those files.
5567:
5568: Extracting the files is usually done by a little program, mk/extract/extract,
5569: which already knows how to extract various archive formats, so most likely you
5570: will not need to change anything here. But if you need, the following variables
5571: may help you:
5572:
5573: EXTRACT_OPTS_{BIN,LHA,PAX,RAR,TAR,ZIP,ZOO}
5574:
5575: Use these variables to override the default options for an extract command,
5576: which are defined in mk/extract/extract.
5577:
5578: EXTRACT_USING
5579:
1.14 jmcneill 5580: This variable can be set to bsdtar, gtar, nbtar (which is the default
5581: value), pax, or an absolute pathname pointing to the command with which tar
5582: archives should be extracted. It is preferred to choose bsdtar over gtar if
5583: NetBSD's pax-as-tar is not good enough.
1.1 dsieger 5584:
5585: If the extract program doesn't serve your needs, you can also override the
5586: EXTRACT_CMD variable, which holds the command used for extracting the files.
5587: This command is executed in the ${WRKSRC} directory. During execution of this
5588: command, the shell variable extract_file holds the absolute pathname of the
5589: file that is going to be extracted.
5590:
5591: And if that still does not suffice, you can override the do-extract target in
5592: the package Makefile.
5593:
1.6 rillig 5594: 17.8. The patch phase
1.1 dsieger 5595:
5596: After extraction, all the patches named by the PATCHFILES, those present in the
5597: patches subdirectory of the package as well as in $LOCALPATCHES/$PKGPATH (e.g.
5598: /usr/local/patches/graphics/png) are applied. Patchfiles ending in .Z or .gz
5599: are uncompressed before they are applied, files ending in .orig or .rej are
5600: ignored. Any special options to patch(1) can be handed in PATCH_DIST_ARGS. See
1.6 rillig 5601: Section 11.3, "patches/*" for more details.
1.1 dsieger 5602:
5603: By default patch(1) is given special args to make it fail if the patches apply
5604: with some lines of fuzz. Please fix (regen) the patches so that they apply
5605: cleanly. The rationale behind this is that patches that don't apply cleanly may
5606: end up being applied in the wrong place, and cause severe harm there.
5607:
1.6 rillig 5608: 17.9. The tools phase
1.1 dsieger 5609:
1.6 rillig 5610: This is covered in Chapter 18, Tools needed for building or running.
1.1 dsieger 5611:
1.6 rillig 5612: 17.10. The wrapper phase
1.1 dsieger 5613:
5614: This phase creates wrapper programs for the compilers and linkers. The
5615: following variables can be used to tweak the wrappers.
5616:
5617: ECHO_WRAPPER_MSG
5618:
5619: The command used to print progress messages. Does nothing by default. Set
5620: to ${ECHO} to see the progress messages.
5621:
5622: WRAPPER_DEBUG
5623:
5624: This variable can be set to yes (default) or no, depending on whether you
5625: want additional information in the wrapper log file.
5626:
5627: WRAPPER_UPDATE_CACHE
5628:
5629: This variable can be set to yes or no, depending on whether the wrapper
5630: should use its cache, which will improve the speed. The default value is
5631: yes, but is forced to no if the platform does not support it.
5632:
5633: WRAPPER_REORDER_CMDS
5634:
5635: A list of reordering commands. A reordering command has the form reorder:l:
5636: lib1:lib2. It ensures that that -llib1 occurs before -llib2.
5637:
5638: WRAPPER_TRANSFORM_CMDS
5639:
5640: A list of transformation commands. [TODO: investigate further]
5641:
1.6 rillig 5642: 17.11. The configure phase
1.1 dsieger 5643:
5644: Most pieces of software need information on the header files, system calls, and
5645: library routines which are available on the platform they run on. The process
5646: of determining this information is known as configuration, and is usually
5647: automated. In most cases, a script is supplied with the distfiles, and its
5648: invocation results in generation of header files, Makefiles, etc.
5649:
5650: If the package contains a configure script, this can be invoked by setting
5651: HAS_CONFIGURE to "yes". If the configure script is a GNU autoconf script, you
5652: should set GNU_CONFIGURE to "yes" instead. What happens in the configure phase
5653: is roughly:
5654:
5655: .for d in ${CONFIGURE_DIRS}
5656: cd ${WRKSRC} \
5657: && cd ${d} \
5658: && env ${CONFIGURE_ENV} ${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}
5659: .endfor
5660:
5661: CONFIGURE_DIRS (default: ".") is a list of pathnames relative to WRKSRC. In
5662: each of these directories, the configure script is run with the environment
5663: CONFIGURE_ENV and arguments CONFIGURE_ARGS. The variables CONFIGURE_ENV,
5664: CONFIGURE_SCRIPT (default: "./configure") and CONFIGURE_ARGS may all be changed
5665: by the package.
5666:
1.38 wiz 5667: If the program uses the Perl way of configuration (mainly Perl modules, but not
5668: only), i.e. a file called Makefile.PL, it should include ../../lang/perl5/
5669: module.mk. To set any parameter for Makefile.PL use the MAKE_PARAMS variable
5670: (e.g., MAKE_PARAMS+=foo=bar
5671:
1.1 dsieger 5672: If the program uses an Imakefile for configuration, the appropriate steps can
5673: be invoked by setting USE_IMAKE to "yes". (If you only want the package
5674: installed in ${X11PREFIX} but xmkmf not being run, set USE_X11BASE instead.)
5675: You can add variables to xmkmf's environment by adding them to the SCRIPTS_ENV
5676: variable.
5677:
1.11 rillig 5678: If the program uses cmake for configuration, the appropriate steps can be
5679: invoked by setting USE_CMAKE to "yes". You can add variables to cmake's
5680: environment by adding them to the CONFIGURE_ENV variable and arguments to cmake
5681: by adding them to the CMAKE_ARGS variable. The top directory argument is given
5682: by the CMAKE_ARG_PATH variable, that defaults to "." (relative to
5683: CONFIGURE_DIRS)
5684:
1.1 dsieger 5685: If there is no configure step at all, set NO_CONFIGURE to "yes".
5686:
1.6 rillig 5687: 17.12. The build phase
1.1 dsieger 5688:
5689: For building a package, a rough equivalent of the following code is executed.
5690:
5691: .for d in ${BUILD_DIRS}
5692: cd ${WRKSRC} \
5693: && cd ${d} \
5694: && env ${MAKE_ENV} \
5695: ${MAKE_PROGRAM} ${BUILD_MAKE_FLAGS} \
5696: -f ${MAKE_FILE} \
5697: ${BUILD_TARGET}
5698: .endfor
5699:
5700: BUILD_DIRS (default: ".") is a list of pathnames relative to WRKSRC. In each of
5701: these directories, MAKE_PROGRAM is run with the environment MAKE_ENV and
5702: arguments BUILD_MAKE_FLAGS. The variables MAKE_ENV, BUILD_MAKE_FLAGS, MAKE_FILE
5703: and BUILD_TARGET may all be changed by the package.
5704:
1.25 wiz 5705: The default value of MAKE_PROGRAM is "gmake" if USE_TOOLS contains "gmake", "
5706: make" otherwise. The default value of MAKE_FILE is "Makefile", and BUILD_TARGET
5707: defaults to "all".
1.1 dsieger 5708:
5709: If there is no build step at all, set NO_BUILD to "yes".
5710:
1.6 rillig 5711: 17.13. The test phase
1.1 dsieger 5712:
5713: [TODO]
5714:
1.6 rillig 5715: 17.14. The install phase
1.1 dsieger 5716:
5717: Once the build stage has completed, the final step is to install the software
5718: in public directories, so users can access the programs and files.
5719:
5720: In the install phase, a rough equivalent of the following code is executed.
5721: Additionally, before and after this code, much magic is performed to do
5722: consistency checks, registering the package, and so on.
5723:
5724: .for d in ${INSTALL_DIRS}
5725: cd ${WRKSRC} \
5726: && cd ${d} \
5727: && env ${MAKE_ENV} \
5728: ${MAKE_PROGRAM} ${INSTALL_MAKE_FLAGS} \
5729: -f ${MAKE_FILE} \
5730: ${INSTALL_TARGET}
5731: .endfor
5732:
5733: The variable's meanings are analogous to the ones in the build phase.
5734: INSTALL_DIRS defaults to BUILD_DIRS. INSTALL_TARGET is "install" by default,
5735: plus "install.man" if USE_IMAKE is defined and NO_INSTALL_MANPAGES is not
5736: defined.
5737:
5738: In the install phase, the following variables are useful. They are all
5739: variations of the install(1) command that have the owner, group and permissions
5740: preset. INSTALL is the plain install command. The specialized variants,
5741: together with their intended use, are:
5742:
5743: INSTALL_PROGRAM_DIR
5744:
5745: directories that contain binaries
5746:
5747: INSTALL_SCRIPT_DIR
5748:
5749: directories that contain scripts
5750:
5751: INSTALL_LIB_DIR
5752:
5753: directories that contain shared and static libraries
5754:
5755: INSTALL_DATA_DIR
5756:
5757: directories that contain data files
5758:
5759: INSTALL_MAN_DIR
5760:
5761: directories that contain man pages
5762:
5763: INSTALL_PROGRAM
5764:
5765: binaries that can be stripped from debugging symbols
5766:
5767: INSTALL_SCRIPT
5768:
5769: binaries that cannot be stripped
5770:
5771: INSTALL_GAME
5772:
5773: game binaries
5774:
5775: INSTALL_LIB
5776:
5777: shared and static libraries
5778:
5779: INSTALL_DATA
5780:
5781: data files
5782:
5783: INSTALL_GAME_DATA
5784:
5785: data files for games
5786:
5787: INSTALL_MAN
5788:
5789: man pages
5790:
5791: Some other variables are:
5792:
5793: INSTALLATION_DIRS
5794:
5795: A list of directories relative to PREFIX that are created by pkgsrc at the
5796: beginning of the install phase. The package is supposed to create all
5797: needed directories itself before installing files to it and list all other
5798: directories here.
5799:
1.25 wiz 5800: In the rare cases that a package shouldn't install anything, set NO_INSTALL to
1.1 dsieger 5801: "yes". This is mostly relevant for packages in the regress category.
5802:
1.6 rillig 5803: 17.15. The package phase
1.1 dsieger 5804:
5805: Once the install stage has completed, a binary package of the installed files
5806: can be built. These binary packages can be used for quick installation without
5807: previous compilation, e.g. by the make bin-install or by using pkg_add.
5808:
5809: By default, the binary packages are created in ${PACKAGES}/All and symlinks are
5810: created in ${PACKAGES}/category, one for each category in the CATEGORIES
5811: variable. PACKAGES defaults to pkgsrc/packages.
5812:
1.6 rillig 5813: 17.16. Cleaning up
1.1 dsieger 5814:
5815: Once you're finished with a package, you can clean the work directory by
5816: running make clean. If you want to clean the work directories of all
5817: dependencies too, use make clean-depends.
5818:
1.6 rillig 5819: 17.17. Other helpful targets
1.1 dsieger 5820:
5821: pre/post-*
5822:
5823: For any of the main targets described in the previous section, two
5824: auxiliary targets exist with "pre-" and "post-" used as a prefix for the
5825: main target's name. These targets are invoked before and after the main
5826: target is called, allowing extra configuration or installation steps be
5827: performed from a package's Makefile, for example, which a program's
5828: configure script or install target omitted.
5829:
5830: do-*
5831:
5832: Should one of the main targets do the wrong thing, and should there be no
5833: variable to fix this, you can redefine it with the do-* target. (Note that
5834: redefining the target itself instead of the do-* target is a bad idea, as
5835: the pre-* and post-* targets won't be called anymore, etc.) You will not
5836: usually need to do this.
5837:
5838: reinstall
5839:
5840: If you did a make install and you noticed some file was not installed
5841: properly, you can repeat the installation with this target, which will
5842: ignore the "already installed" flag.
5843:
5844: This is the default value of DEPENDS_TARGET except in the case of make
5845: update and make package, where the defaults are "package" and "update",
5846: respectively.
5847:
5848: deinstall
5849:
5850: This target does a pkg_delete(1) in the current directory, effectively
5851: de-installing the package. The following variables can be used to tune the
5852: behaviour:
5853:
5854: PKG_VERBOSE
5855:
5856: Add a "-v" to the pkg_delete(1) command.
5857:
5858: DEINSTALLDEPENDS
5859:
5860: Remove all packages that require (depend on) the given package. This
5861: can be used to remove any packages that may have been pulled in by a
5862: given package, e.g. if make deinstall DEINSTALLDEPENDS=1 is done in
1.25 wiz 5863: pkgsrc/x11/kde, this is likely to remove whole KDE. Works by adding "-R
5864: " to the pkg_delete(1) command line.
1.1 dsieger 5865:
5866: bin-install
5867:
5868: Install a binary package from local disk and via FTP from a list of sites
5869: (see the BINPKG_SITES variable), and do a make package if no binary package
5870: is available anywhere. The arguments given to pkg_add can be set via
5871: BIN_INSTALL_FLAGS e.g., to do verbose operation, etc.
5872:
5873: update
5874:
5875: This target causes the current package to be updated to the latest version.
5876: The package and all depending packages first get de-installed, then current
5877: versions of the corresponding packages get compiled and installed. This is
5878: similar to manually noting which packages are currently installed, then
5879: performing a series of make deinstall and make install (or whatever
5880: UPDATE_TARGET is set to) for these packages.
5881:
5882: You can use the "update" target to resume package updating in case a
5883: previous make update was interrupted for some reason. However, in this
5884: case, make sure you don't call make clean or otherwise remove the list of
5885: dependent packages in WRKDIR. Otherwise, you lose the ability to
5886: automatically update the current package along with the dependent packages
5887: you have installed.
5888:
5889: Resuming an interrupted make update will only work as long as the package
5890: tree remains unchanged. If the source code for one of the packages to be
5891: updated has been changed, resuming make update will most certainly fail!
5892:
1.4 rillig 5893: The following variables can be used either on the command line or in
1.1 dsieger 5894: mk.conf to alter the behaviour of make update:
5895:
5896: UPDATE_TARGET
5897:
5898: Install target to recursively use for the updated package and the
5899: dependent packages. Defaults to DEPENDS_TARGET if set, "install"
1.25 wiz 5900: otherwise for make update. Other good targets are "package" or "
5901: bin-install". Do not set this to "update" or you will get stuck in an
1.1 dsieger 5902: endless loop!
5903:
5904: NOCLEAN
5905:
5906: Don't clean up after updating. Useful if you want to leave the work
5907: sources of the updated packages around for inspection or other
1.25 wiz 5908: purposes. Be sure you eventually clean up the source tree (see the "
5909: clean-update" target below) or you may run into troubles with old
1.1 dsieger 5910: source code still lying around on your next make or make update.
5911:
5912: REINSTALL
5913:
5914: Deinstall each package before installing (making DEPENDS_TARGET). This
5915: may be necessary if the "clean-update" target (see below) was called
5916: after interrupting a running make update.
5917:
5918: DEPENDS_TARGET
5919:
5920: Allows you to disable recursion and hardcode the target for packages.
5921: The default is "update" for the update target, facilitating a recursive
5922: update of prerequisite packages. Only set DEPENDS_TARGET if you want to
5923: disable recursive updates. Use UPDATE_TARGET instead to just set a
5924: specific target for each package to be installed during make update
5925: (see above).
5926:
5927: clean-update
5928:
5929: Clean the source tree for all packages that would get updated if make
5930: update was called from the current directory. This target should not be
5931: used if the current package (or any of its depending packages) have already
5932: been de-installed (e.g., after calling make update) or you may lose some
1.25 wiz 5933: packages you intended to update. As a rule of thumb: only use this target
1.1 dsieger 5934: before the first time you run make update and only if you have a dirty
5935: package tree (e.g., if you used NOCLEAN).
5936:
5937: If you are unsure about whether your tree is clean, you can either perform
5938: a make clean at the top of the tree, or use the following sequence of
5939: commands from the directory of the package you want to update (before
5940: running make update for the first time, otherwise you lose all the packages
5941: you wanted to update!):
5942:
5943: # make clean-update
5944: # make clean CLEANDEPENDS=YES
5945: # make update
5946:
5947:
1.4 rillig 5948: The following variables can be used either on the command line or in
1.1 dsieger 5949: mk.conf to alter the behaviour of make clean-update:
5950:
5951: CLEAR_DIRLIST
5952:
5953: After make clean, do not reconstruct the list of directories to update
5954: for this package. Only use this if make update successfully installed
5955: all packages you wanted to update. Normally, this is done automatically
5956: on make update, but may have been suppressed by the NOCLEAN variable
5957: (see above).
5958:
5959: replace
5960:
5961: Update the installation of the current package. This differs from update in
5962: that it does not replace dependent packages. You will need to install
5963: pkgtools/pkg_tarup for this target to work.
5964:
5965: Be careful when using this target! There are no guarantees that dependent
5966: packages will still work, in particular they will most certainly break if
5967: you make replace a library package whose shared library major version
5968: changed between your installed version and the new one. For this reason,
5969: this target is not officially supported and only recommended for advanced
5970: users.
5971:
5972: info
5973:
5974: This target invokes pkg_info(1) for the current package. You can use this
5975: to check which version of a package is installed.
5976:
5977: index
5978:
5979: This is a top-level command, i.e. it should be used in the pkgsrc
5980: directory. It creates a database of all packages in the local pkgsrc tree,
5981: including dependencies, comment, maintainer, and some other useful
5982: information. Individual entries are created by running make describe in the
5983: packages' directories. This index file is saved as pkgsrc/INDEX. It can be
5984: displayed in verbose format by running make print-index. You can search in
5985: it with make search key=something. You can extract a list of all packages
5986: that depend on a particular one by running make show-deps PKG=somepackage.
5987:
5988: Running this command takes a very long time, some hours even on fast
5989: machines!
5990:
5991: readme
5992:
5993: This target generates a README.html file, which can be viewed using a
5994: browser such as www/firefox or www/links. The generated files contain
5995: references to any packages which are in the PACKAGES directory on the local
5996: host. The generated files can be made to refer to URLs based on
5997: FTP_PKG_URL_HOST and FTP_PKG_URL_DIR. For example, if I wanted to generate
5998: README.html files which pointed to binary packages on the local machine, in
5999: the directory /usr/packages, set FTP_PKG_URL_HOST=file://localhost and
6000: FTP_PKG_URL_DIR=/usr/packages. The ${PACKAGES} directory and its
6001: subdirectories will be searched for all the binary packages.
6002:
6003: The target can be run at the toplevel or in category directories, in which
6004: case it descends recursively.
6005:
6006: readme-all
6007:
6008: This is a top-level command, run it in pkgsrc. Use this target to create a
6009: file README-all.html which contains a list of all packages currently
6010: available in the NetBSD Packages Collection, together with the category
6011: they belong to and a short description. This file is compiled from the
6012: pkgsrc/*/README.html files, so be sure to run this after a make readme.
6013:
6014: cdrom-readme
6015:
6016: This is very much the same as the "readme" target (see above), but is to be
6017: used when generating a pkgsrc tree to be written to a CD-ROM. This target
6018: also produces README.html files, and can be made to refer to URLs based on
6019: CDROM_PKG_URL_HOST and CDROM_PKG_URL_DIR.
6020:
6021: show-distfiles
6022:
6023: This target shows which distfiles and patchfiles are needed to build the
6024: package (ALLFILES, which contains all DISTFILES and PATCHFILES, but not
6025: patches/*).
6026:
6027: show-downlevel
6028:
6029: This target shows nothing if the package is not installed. If a version of
6030: this package is installed, but is not the version provided in this version
6031: of pkgsrc, then a warning message is displayed. This target can be used to
6032: show which of your installed packages are downlevel, and so the old
6033: versions can be deleted, and the current ones added.
6034:
6035: show-pkgsrc-dir
6036:
6037: This target shows the directory in the pkgsrc hierarchy from which the
6038: package can be built and installed. This may not be the same directory as
6039: the one from which the package was installed. This target is intended to be
6040: used by people who may wish to upgrade many packages on a single host, and
1.25 wiz 6041: can be invoked from the top-level pkgsrc Makefile by using the "
6042: show-host-specific-pkgs" target.
1.1 dsieger 6043:
6044: show-installed-depends
6045:
6046: This target shows which installed packages match the current package's
6047: DEPENDS. Useful if out of date dependencies are causing build problems.
6048:
6049: check-shlibs
6050:
6051: After a package is installed, check all its binaries and (on ELF platforms)
6052: shared libraries to see if they find the shared libs they need. Run by
1.4 rillig 6053: default if PKG_DEVELOPER is set in mk.conf.
1.1 dsieger 6054:
6055: print-PLIST
6056:
6057: After a "make install" from a new or upgraded pkg, this prints out an
6058: attempt to generate a new PLIST from a find -newer work/.extract_done. An
6059: attempt is made to care for shared libs etc., but it is strongly
6060: recommended to review the result before putting it into PLIST. On upgrades,
6061: it's useful to diff the output of this command against an already existing
6062: PLIST file.
6063:
6064: If the package installs files via tar(1) or other methods that don't update
6065: file access times, be sure to add these files manually to your PLIST, as
6066: the "find -newer" command used by this target won't catch them!
6067:
1.6 rillig 6068: See Section 13.3, "Tweaking output of make print-PLIST" for more
1.1 dsieger 6069: information on this target.
6070:
6071: bulk-package
6072:
6073: Used to do bulk builds. If an appropriate binary package already exists, no
6074: action is taken. If not, this target will compile, install and package it
1.66 asau 6075: (and its depends, if PKG_DEPENDS is set properly. See Chapter 7, Creating
6076: binary packages for everything in pkgsrc (bulk builds)). After creating the
6077: binary package, the sources, the just-installed package and its required
6078: packages are removed, preserving free disk space.
1.1 dsieger 6079:
6080: Beware that this target may deinstall all packages installed on a system!
6081:
6082: bulk-install
6083:
6084: Used during bulk-installs to install required packages. If an up-to-date
1.25 wiz 6085: binary package is available, it will be installed via pkg_add(1). If not,
1.1 dsieger 6086: make bulk-package will be executed, but the installed binary won't be
6087: removed.
6088:
6089: A binary package is considered "up-to-date" to be installed via pkg_add(1)
6090: if:
6091:
1.42 asau 6092: + None of the package's files (Makefile, ...) were modified since it was
1.1 dsieger 6093: built.
6094:
1.42 asau 6095: + None of the package's required (binary) packages were modified since it
1.1 dsieger 6096: was built.
6097:
6098: Beware that this target may deinstall all packages installed on a system!
6099:
1.6 rillig 6100: Chapter 18. Tools needed for building or running
1.1 dsieger 6101:
6102: Table of Contents
6103:
1.6 rillig 6104: 18.1. Tools for pkgsrc builds
6105: 18.2. Tools needed by packages
6106: 18.3. Tools provided by platforms
6107: 18.4. Questions regarding the tools
1.1 dsieger 6108:
6109: The USE_TOOLS definition is used both internally by pkgsrc and also for
6110: individual packages to define what commands are needed for building a package
6111: (like BUILD_DEPENDS) or for later run-time of an installed packaged (such as
6112: DEPENDS). If the native system provides an adequate tool, then in many cases, a
6113: pkgsrc package will not be used.
6114:
6115: When building a package, the replacement tools are made available in a
6116: directory (as symlinks or wrapper scripts) that is early in the executable
6117: search path. Just like the buildlink system, this helps with consistent builds.
6118:
6119: A tool may be needed to help build a specific package. For example, perl, GNU
6120: make (gmake) or yacc may be needed.
6121:
6122: Also a tool may be needed, for example, because the native system's supplied
6123: tool may be inefficient for building a package with pkgsrc. For example, a
6124: package may need GNU awk, bison (instead of yacc) or a better sed.
6125:
6126: The tools used by a package can be listed by running make show-tools.
6127:
1.6 rillig 6128: 18.1. Tools for pkgsrc builds
1.1 dsieger 6129:
6130: The default set of tools used by pkgsrc is defined in bsd.pkg.mk. This includes
6131: standard Unix tools, such as: cat, awk, chmod, test, and so on. These can be
6132: seen by running: make show-var VARNAME=USE_TOOLS.
6133:
6134: If a package needs a specific program to build then the USE_TOOLS variable can
6135: be used to define the tools needed.
6136:
1.6 rillig 6137: 18.2. Tools needed by packages
1.1 dsieger 6138:
1.29 wiz 6139: In the following examples, the :run means that it is needed at run-time (and
6140: becomes a DEPENDS). The default is a build dependency which can be set with
6141: :build. (So in this example, it is the same as gmake:build and
6142: pkg-config:build.)
1.1 dsieger 6143:
6144: USE_TOOLS+= gmake perl:run pkg-config
6145:
6146: When using the tools framework, a TOOLS_PATH.foo variable is defined which
6147: contains the full path to the appropriate tool. For example, TOOLS_PATH.bash
6148: could be "/bin/bash" on Linux systems.
6149:
6150: If you always need a pkgsrc version of the tool at run-time, then just use
6151: DEPENDS instead.
6152:
1.6 rillig 6153: 18.3. Tools provided by platforms
1.1 dsieger 6154:
6155: When improving or porting pkgsrc to a new platform, have a look at (or create)
6156: the corresponding platform specific make file fragment under pkgsrc/mk/tools/
6157: tools.${OPSYS}.mk which defines the name of the common tools. For example:
6158:
6159: .if exists(/usr/bin/bzcat)
6160: TOOLS_PLATFORM.bzcat?= /usr/bin/bzcat
6161: .elif exists(/usr/bin/bzip2)
6162: TOOLS_PLATFORM.bzcat?= /usr/bin/bzip2 -cd
6163: .endif
6164:
6165: TOOLS_PLATFORM.true?= true # shell builtin
6166:
1.6 rillig 6167: 18.4. Questions regarding the tools
1.1 dsieger 6168:
1.6 rillig 6169: 18.4.1. How do I add a new tool?
6170: 18.4.2. How do I get a list of all available tools?
6171: 18.4.3. How can I get a list of all the tools that a package is using while
1.1 dsieger 6172: being built? I want to know whether it uses sed or not.
6173:
1.6 rillig 6174: 18.4.1. How do I add a new tool?
1.1 dsieger 6175:
6176: TODO
6177:
1.6 rillig 6178: 18.4.2. How do I get a list of all available tools?
1.1 dsieger 6179:
6180: TODO
6181:
1.6 rillig 6182: 18.4.3. How can I get a list of all the tools that a package is using while
1.1 dsieger 6183: being built? I want to know whether it uses sed or not.
6184:
6185: Currently, you can't. (TODO: But I want to be able to do it.)
6186:
1.6 rillig 6187: Chapter 19. Making your package work
1.1 dsieger 6188:
6189: Table of Contents
6190:
1.6 rillig 6191: 19.1. General operation
1.1 dsieger 6192:
1.6 rillig 6193: 19.1.1. Portability of packages
1.24 wiz 6194: 19.1.2. How to pull in user-settable variables from mk.conf
1.6 rillig 6195: 19.1.3. User interaction
6196: 19.1.4. Handling licenses
6197: 19.1.5. Restricted packages
6198: 19.1.6. Handling dependencies
6199: 19.1.7. Handling conflicts with other packages
6200: 19.1.8. Packages that cannot or should not be built
6201: 19.1.9. Packages which should not be deleted, once installed
6202: 19.1.10. Handling packages with security problems
6203: 19.1.11. How to handle incrementing versions when fixing an existing
1.1 dsieger 6204: package
1.6 rillig 6205: 19.1.12. Substituting variable text in the package files (the SUBST
1.1 dsieger 6206: framework)
6207:
1.6 rillig 6208: 19.2. Fixing problems in the fetch phase
1.1 dsieger 6209:
1.6 rillig 6210: 19.2.1. Packages whose distfiles aren't available for plain downloading
6211: 19.2.2. How to handle modified distfiles with the 'old' name
1.1 dsieger 6212:
1.6 rillig 6213: 19.3. Fixing problems in the configure phase
1.1 dsieger 6214:
1.6 rillig 6215: 19.3.1. Shared libraries - libtool
6216: 19.3.2. Using libtool on GNU packages that already support libtool
6217: 19.3.3. GNU Autoconf/Automake
6218:
6219: 19.4. Programming languages
6220:
6221: 19.4.1. C, C++, and Fortran
6222: 19.4.2. Java
6223: 19.4.3. Packages containing perl scripts
1.41 wiz 6224: 19.4.4. Packages containing shell scripts
6225: 19.4.5. Other programming languages
1.6 rillig 6226:
6227: 19.5. Fixing problems in the build phase
6228:
6229: 19.5.1. Compiling C and C++ code conditionally
6230: 19.5.2. How to handle compiler bugs
1.24 wiz 6231: 19.5.3. Undefined reference to "..."
1.6 rillig 6232: 19.5.4. Running out of memory
6233:
6234: 19.6. Fixing problems in the install phase
6235:
6236: 19.6.1. Creating needed directories
6237: 19.6.2. Where to install documentation
6238: 19.6.3. Installing highscore files
6239: 19.6.4. Adding DESTDIR support to packages
6240: 19.6.5. Packages with hardcoded paths to other interpreters
6241: 19.6.6. Packages installing perl modules
6242: 19.6.7. Packages installing info files
6243: 19.6.8. Packages installing man pages
1.7 rillig 6244: 19.6.9. Packages installing GConf data files
1.18 mishka 6245: 19.6.10. Packages installing scrollkeeper/rarian data files
1.6 rillig 6246: 19.6.11. Packages installing X11 fonts
6247: 19.6.12. Packages installing GTK2 modules
6248: 19.6.13. Packages installing SGML or XML data
6249: 19.6.14. Packages installing extensions to the MIME database
6250: 19.6.15. Packages using intltool
6251: 19.6.16. Packages installing startup scripts
6252: 19.6.17. Packages installing TeX modules
6253: 19.6.18. Packages supporting running binaries in emulation
6254: 19.6.19. Packages installing hicolor theme icons
6255: 19.6.20. Packages installing desktop files
1.1 dsieger 6256:
1.6 rillig 6257: 19.7. Marking packages as having problems
1.1 dsieger 6258:
1.6 rillig 6259: 19.1. General operation
1.1 dsieger 6260:
1.6 rillig 6261: 19.1.1. Portability of packages
1.1 dsieger 6262:
6263: One appealing feature of pkgsrc is that it runs on many different platforms. As
6264: a result, it is important to ensure, where possible, that packages in pkgsrc
6265: are portable. This chapter mentions some particular details you should pay
6266: attention to while working on pkgsrc.
6267:
1.6 rillig 6268: 19.1.2. How to pull in user-settable variables from mk.conf
1.1 dsieger 6269:
6270: The pkgsrc user can configure pkgsrc by overriding several variables in the
1.4 rillig 6271: file pointed to by MAKECONF, which is mk.conf by default. When you want to use
6272: those variables in the preprocessor directives of make(1) (for example .if or
6273: .for), you need to include the file ../../mk/bsd.prefs.mk before, which in turn
6274: loads the user preferences.
1.1 dsieger 6275:
6276: But note that some variables may not be completely defined after ../../mk/
6277: bsd.prefs.mk has been included, as they may contain references to variables
6278: that are not yet defined. In shell commands this is no problem, since variables
6279: are actually macros, which are only expanded when they are used. But in the
6280: preprocessor directives mentioned above and in dependency lines (of the form
6281: target: dependencies) the variables are expanded at load time.
6282:
6283: Note
6284:
6285: Currently there is no exhaustive list of all variables that tells you whether
6286: they can be used at load time or only at run time, but it is in preparation.
6287:
1.6 rillig 6288: 19.1.3. User interaction
1.1 dsieger 6289:
6290: Occasionally, packages require interaction from the user, and this can be in a
6291: number of ways:
6292:
6293: * When fetching the distfiles, some packages require user interaction such as
6294: entering username/password or accepting a license on a web page.
6295:
6296: * When extracting the distfiles, some packages may ask for passwords.
6297:
6298: * help to configure the package before it is built
6299:
6300: * help during the build process
6301:
6302: * help during the installation of a package
6303:
6304: The INTERACTIVE_STAGE definition is provided to notify the pkgsrc mechanism of
6305: an interactive stage which will be needed, and this should be set in the
6306: package's Makefile, e.g.:
6307:
6308: INTERACTIVE_STAGE= build
6309:
6310:
6311: Multiple interactive stages can be specified:
6312:
6313: INTERACTIVE_STAGE= configure install
6314:
6315:
6316: The user can then decide to skip this package by setting the BATCH variable.
6317:
1.6 rillig 6318: 19.1.4. Handling licenses
1.1 dsieger 6319:
6320: Authors of software can choose the licence under which software can be copied.
6321: This is due to copyright law, and reasons for license choices are outside the
6322: scope of pkgsrc. The pkgsrc system recognizes that there are a number of
6323: licenses which some users may find objectionable or difficult or impossible to
6324: comply with. The Free Software Foundation has declared some licenses "Free",
6325: and the Open Source Initiative has a definition of "Open Source". The pkgsrc
6326: system, as a policy choice, does not label packages which have licenses that
6327: are Free or Open Source. However, packages without a license meeting either of
6328: those tests are labeled with a license tag denoting the license. Note that a
6329: package with no license to copy trivially does not meet either the Free or Open
6330: Source test.
6331:
6332: For packages which are not Free or Open Source, pkgsrc will not build the
6333: package unless the user has indicated to pkgsrc that packages with that
6334: particular license may be built. Note that this documentation avoids the term
6335: "accepted the license". The pkgsrc system is merely providing a mechanism to
6336: avoid accidentally building a package with a non-free license; judgement and
6337: responsibility remain with the user. (Installation of binary packages are not
6338: currently subject to this mechanism; this is a bug.)
6339:
6340: One might want to only install packages with a BSD license, or the GPL, and not
1.20 jnemeth 6341: the other. The free licenses are added to the default ACCEPTABLE_LICENSES
6342: variable. The user can override the default by setting the ACCEPTABLE_LICENSES
6343: variable with "=" instead of "+=". The licenses accepted by default are:
6344:
1.49 rodent 6345: apache-1.1 apache-2.0
6346: arphic-public
6347: artistic artistic-2.0
6348: boost-license
6349: cc-by-sa-v3.0
1.56 ryoon 6350: cc0-1.0-universal
1.49 rodent 6351: cddl-1.0
6352: cpl-1.0
6353: epl-v1.0
1.33 wiz 6354: gnu-fdl-v1.1 gnu-fdl-v1.2 gnu-fdl-v1.3
6355: gnu-gpl-v1
6356: gnu-gpl-v2 gnu-lgpl-v2 gnu-lgpl-v2.1
6357: gnu-gpl-v3 gnu-lgpl-v3
1.49 rodent 6358: ibm-public-license-1.0
6359: ipafont
6360: isc
6361: lppl-1.3c
6362: lucent
6363: miros
6364: mit
6365: mpl-1.0 mpl-1.1 mpl-2.0
6366: mplusfont
6367: ofl-v1.0 ofl-v1.1
1.33 wiz 6368: original-bsd modified-bsd 2-clause-bsd
1.49 rodent 6369: php
6370: png-license
1.33 wiz 6371: postgresql-license
1.49 rodent 6372: public-domain
6373: python-software-foundation
6374: qpl-v1.0
1.53 rodent 6375: sgi-free-software-b-v2.0
1.49 rodent 6376: sleepycat-public
6377: unlicense
6378: x11
1.33 wiz 6379: zlib
6380: zpl
1.20 jnemeth 6381:
1.1 dsieger 6382:
6383: The license tag mechanism is intended to address copyright-related issues
6384: surrounding building, installing and using a package, and not to address
1.20 jnemeth 6385: redistribution issues (see RESTRICTED and NO_SRC_ON_FTP, etc.). Packages with
6386: redistribution restrictions should set these tags.
1.1 dsieger 6387:
6388: Denoting that a package may be copied according to a particular license is done
6389: by placing the license in pkgsrc/licenses and setting the LICENSE variable to a
6390: string identifying the license, e.g. in graphics/xv:
6391:
6392: LICENSE= xv-license
6393:
6394:
6395: When trying to build, the user will get a notice that the package is covered by
6396: a license which has not been placed in the ACCEPTABLE_LICENSES variable:
6397:
6398: % make
6399: ===> xv-3.10anb9 has an unacceptable license: xv-license.
6400: ===> To view the license, enter "/usr/bin/make show-license".
6401: ===> To indicate acceptance, add this line to your /etc/mk.conf:
6402: ===> ACCEPTABLE_LICENSES+=xv-license
6403: *** Error code 1
6404:
6405:
6406: The license can be viewed with make show-license, and if the user so chooses,
1.4 rillig 6407: the line printed above can be added to mk.conf to convey to pkgsrc that it
1.1 dsieger 6408: should not in the future fail because of that license:
6409:
6410: ACCEPTABLE_LICENSES+=xv-license
6411:
6412:
1.49 rodent 6413: When adding a package with a new license, the following steps are required:
6414:
6415: 1. Check if the file can avoid the -license filename tag as described above by
6416: referencing Various Licenses and Comments about Them and Licenses by Name |
6417: Open Source Initiative. If this is the case, additionally add the license
6418: filename to:
6419:
6420: + DEFAULT_ACCEPTABLE_LICENSES in pkgsrc/mk/license.mk
6421:
6422: + default_acceptable_licenses in pkgsrc/pkgtools/pkg_install/files/lib/
6423: license.c
6424:
1.53 rodent 6425: + the ACCEPTABLE_LICENSES list in pkgsrc/doc/guide/files/fixes.xml
6426:
1.49 rodent 6427: with the proper syntax as demonstrated in those files, respectively.
6428:
6429: 2. The license text should be added to pkgsrc/licenses for displaying. A list
6430: of known licenses can be seen in this directory.
1.1 dsieger 6431:
6432: When the license changes (in a way other than formatting), please make sure
6433: that the new license has a different name (e.g., append the version number if
6434: it exists, or the date). Just because a user told pkgsrc to build programs
6435: under a previous version of a license does not mean that pkgsrc should build
6436: programs under the new licenses. The higher-level point is that pkgsrc does not
6437: evaluate licenses for reasonableness; the only test is a mechanistic test of
6438: whether a particular text has been approved by either of two bodies.
6439:
6440: The use of LICENSE=shareware, LICENSE=no-commercial-use, and similar language
6441: is deprecated because it does not crisply refer to a particular license text.
6442: Another problem with such usage is that it does not enable a user to tell
6443: pkgsrc to proceed for a single package without also telling pkgsrc to proceed
6444: for all packages with that tag.
6445:
1.6 rillig 6446: 19.1.5. Restricted packages
1.1 dsieger 6447:
6448: Some licenses restrict how software may be re-distributed. Because a license
6449: tag is required unless the package is Free or Open Source, all packages with
6450: restrictions should have license tags. By declaring the restrictions, package
6451: tools can automatically refrain from e.g. placing binary packages on FTP sites.
6452:
6453: There are four restrictions that may be encoded, which are the cross product of
6454: sources (distfiles) and binaries not being placed on FTP sites and CD-ROMs.
6455: Because this is rarely the exact language in any license, and because non-Free
6456: licenses tend to be different from each other, pkgsrc adopts a definition of
6457: FTP and CD-ROM. Pkgsrc uses "FTP" to mean that the source or binary file should
6458: not be made available over the Internet at no charge. Pkgsrc uses "CD-ROM" to
6459: mean that the source or binary may not be made available on some kind of media,
6460: together with other source and binary packages, and which is sold for a
6461: distribution charge.
6462:
6463: In order to encode these restrictions, the package system defines five make
6464: variables that can be set to note these restrictions:
6465:
6466: * RESTRICTED
6467:
6468: This variable should be set whenever a restriction exists (regardless of
6469: its kind). Set this variable to a string containing the reason for the
6470: restriction. It should be understood that those wanting to understand the
6471: restriction will have to read the license, and perhaps seek advice of
6472: counsel.
6473:
6474: * NO_BIN_ON_CDROM
6475:
6476: Binaries may not be placed on CD-ROM containing other binary packages, for
6477: which a distribution charge may be made. In this case, set this variable to
6478: ${RESTRICTED}.
6479:
6480: * NO_BIN_ON_FTP
6481:
6482: Binaries may not made available on the Internet without charge. In this
6483: case, set this variable to ${RESTRICTED}. If this variable is set, binary
6484: packages will not be included on ftp.NetBSD.org.
6485:
6486: * NO_SRC_ON_CDROM
6487:
6488: Distfiles may not be placed on CD-ROM, together with other distfiles, for
6489: which a fee may be charged. In this case, set this variable to $
6490: {RESTRICTED}.
6491:
6492: * NO_SRC_ON_FTP
6493:
6494: Distfiles may not made available via FTP at no charge. In this case, set
6495: this variable to ${RESTRICTED}. If this variable is set, the distfile(s)
6496: will not be mirrored on ftp.NetBSD.org.
6497:
1.33 wiz 6498: Please note that packages will to be removed from pkgsrc when the distfiles are
6499: not distributable and cannot be obtained for a period of one full quarter
6500: branch. Packages with manual / interactive fetch must have a maintainer and it
6501: is his/her responsibility to ensure this.
6502:
1.6 rillig 6503: 19.1.6. Handling dependencies
1.1 dsieger 6504:
6505: Your package may depend on some other package being present - and there are
6506: various ways of expressing this dependency. pkgsrc supports the BUILD_DEPENDS
6507: and DEPENDS definitions, the USE_TOOLS definition, as well as dependencies via
6508: buildlink3.mk, which is the preferred way to handle dependencies, and which
1.6 rillig 6509: uses the variables named above. See Chapter 14, Buildlink methodology for more
1.1 dsieger 6510: information.
6511:
6512: The basic difference between the two variables is as follows: The DEPENDS
6513: definition registers that pre-requisite in the binary package so it will be
6514: pulled in when the binary package is later installed, whilst the BUILD_DEPENDS
6515: definition does not, marking a dependency that is only needed for building the
6516: package.
6517:
6518: This means that if you only need a package present whilst you are building, it
6519: should be noted as a BUILD_DEPENDS.
6520:
6521: The format for a BUILD_DEPENDS and a DEPENDS definition is:
6522:
6523: <pre-req-package-name>:../../<category>/<pre-req-package>
6524:
6525:
6526: Please note that the "pre-req-package-name" may include any of the wildcard
6527: version numbers recognized by pkg_info(1).
6528:
1.55 wiz 6529: 1. If your package needs another package's binaries or libraries to build and
1.1 dsieger 6530: run, and if that package has a buildlink3.mk file available, use it:
6531:
6532: .include "../../graphics/jpeg/buildlink3.mk"
6533:
6534:
1.55 wiz 6535: 2. If your package needs another package's binaries or libraries only for
6536: building, and if that package has a buildlink3.mk file available, use it:
6537:
6538: .include "../../graphics/jpeg/buildlink3.mk"
6539:
6540:
6541: but set BUILDLINK_DEPMETHOD.jpeg?=build to make it a build dependency only.
6542: This case is rather rare.
6543:
6544: 3. If your package needs binaries from another package to build, use the
1.26 spz 6545: BUILD_DEPENDS definition:
1.1 dsieger 6546:
1.26 spz 6547: BUILD_DEPENDS+= scons-[0-9]*:../../devel/scons
1.1 dsieger 6548:
6549:
1.55 wiz 6550: 4. If your package needs a library with which to link and there is no
1.26 spz 6551: buildlink3.mk file available, create one. Using DEPENDS won't be sufficient
6552: because the include files and libraries will be hidden from the compiler.
1.1 dsieger 6553:
1.55 wiz 6554: 5. If your package needs some executable to be able to run correctly and if
1.26 spz 6555: there's no buildlink3.mk file, this is specified using the DEPENDS
6556: variable. The print/lyx package needs to be able to execute the latex
6557: binary from the teTeX package when it runs, and that is specified:
1.1 dsieger 6558:
1.26 spz 6559: DEPENDS+= teTeX-[0-9]*:../../print/teTeX
1.1 dsieger 6560:
6561:
1.55 wiz 6562: 6. You can use wildcards in package dependencies. Note that such wildcard
1.26 spz 6563: dependencies are retained when creating binary packages. The dependency is
6564: checked when installing the binary package and any package which matches
6565: the pattern will be used. Wildcard dependencies should be used with care.
1.1 dsieger 6566:
6567: The "-[0-9]*" should be used instead of "-*" to avoid potentially ambiguous
6568: matches such as "tk-postgresql" matching a "tk-*" DEPENDS.
6569:
6570: Wildcards can also be used to specify that a package will only build
6571: against a certain minimum version of a pre-requisite:
6572:
1.26 spz 6573: DEPENDS+= ImageMagick>=6.0:../../graphics/ImageMagick
1.1 dsieger 6574:
6575:
1.26 spz 6576: This means that the package will build using version 6.0 of ImageMagick or
6577: newer. Such a dependency may be warranted if, for example, the command line
6578: options of an executable have changed.
6579:
6580: If you need to depend on minimum versions of libraries, see the buildlink
6581: section of the pkgsrc guide.
1.1 dsieger 6582:
6583: For security fixes, please update the package vulnerabilities file. See
1.6 rillig 6584: Section 19.1.10, "Handling packages with security problems" for more
1.1 dsieger 6585: information.
6586:
1.59 jnemeth 6587: 7. If the package depends on either one of two (or more) packages, specify the
6588: "pre-req-package-name" as a comma-separated list between curly braces.
6589:
6590: As an example, take a package that depends on the Perl "version" module,
6591: which has been part of Perl itself since version 5.10.0. This either/or
6592: dependency is expressed as:
6593:
6594: DEPENDS+= {perl>=5.10.0,p5-version-[0-9]*}:../../devel/p5-version
6595:
6596:
1.1 dsieger 6597: If your package needs files from another package to build, add the relevant
6598: distribution files to DISTFILES, so they will be extracted automatically. See
6599: the print/ghostscript package for an example. (It relies on the jpeg sources
6600: being present in source form during the build.)
6601:
1.6 rillig 6602: 19.1.7. Handling conflicts with other packages
1.1 dsieger 6603:
6604: Your package may conflict with other packages a user might already have
6605: installed on his system, e.g. if your package installs the same set of files as
6606: another package in the pkgsrc tree.
6607:
6608: In this case you can set CONFLICTS to a space-separated list of packages
6609: (including version string) your package conflicts with.
6610:
6611: For example, x11/Xaw3d and x11/Xaw-Xpm install the same shared library, thus
6612: you set in pkgsrc/x11/Xaw3d/Makefile:
6613:
6614: CONFLICTS= Xaw-Xpm-[0-9]*
6615:
6616:
6617: and in pkgsrc/x11/Xaw-Xpm/Makefile:
6618:
6619: CONFLICTS= Xaw3d-[0-9]*
6620:
6621:
6622: Packages will automatically conflict with other packages with the name prefix
6623: and a different version string. "Xaw3d-1.5" e.g. will automatically conflict
6624: with the older version "Xaw3d-1.3".
6625:
1.6 rillig 6626: 19.1.8. Packages that cannot or should not be built
1.1 dsieger 6627:
6628: There are several reasons why a package might be instructed to not build under
6629: certain circumstances. If the package builds and runs on most platforms, the
6630: exceptions should be noted with NOT_FOR_PLATFORM. If the package builds and
6631: runs on a small handful of platforms, set ONLY_FOR_PLATFORM instead. Both
6632: ONLY_FOR_PLATFORM and NOT_FOR_PLATFORM are OS triples (OS-version-platform)
6633: that can use glob-style wildcards.
6634:
6635: Some packages are tightly bound to a specific version of an operating system,
6636: e.g. LKMs or sysutils/lsof. Such binary packages are not backwards compatible
6637: with other versions of the OS, and should be uploaded to a version specific
6638: directory on the FTP server. Mark these packages by setting OSVERSION_SPECIFIC
6639: to "yes". This variable is not currently used by any of the package system
6640: internals, but may be used in the future.
6641:
6642: If the package should be skipped (for example, because it provides
6643: functionality already provided by the system), set PKG_SKIP_REASON to a
6644: descriptive message. If the package should fail because some preconditions are
6645: not met, set PKG_FAIL_REASON to a descriptive message.
6646:
1.6 rillig 6647: 19.1.9. Packages which should not be deleted, once installed
1.1 dsieger 6648:
6649: To ensure that a package may not be deleted, once it has been installed, the
6650: PKG_PRESERVE definition should be set in the package Makefile. This will be
1.25 wiz 6651: carried into any binary package that is made from this pkgsrc entry. A "
6652: preserved" package will not be deleted using pkg_delete(1) unless the "-f"
1.1 dsieger 6653: option is used.
6654:
1.6 rillig 6655: 19.1.10. Handling packages with security problems
1.1 dsieger 6656:
6657: When a vulnerability is found, this should be noted in localsrc/security/
1.32 wiz 6658: advisories/pkg-vulnerabilities, and after committing that file, ask
6659: pkgsrc-security@NetBSD.org to update the file on ftp.NetBSD.org.
1.1 dsieger 6660:
6661: After fixing the vulnerability by a patch, its PKGREVISION should be increased
6662: (this is of course not necessary if the problem is fixed by using a newer
1.32 wiz 6663: release of the software), and the pattern in the pkg-vulnerabilities file must
6664: be updated.
1.1 dsieger 6665:
6666: Also, if the fix should be applied to the stable pkgsrc branch, be sure to
6667: submit a pullup request!
6668:
6669: Binary packages already on ftp.NetBSD.org will be handled semi-automatically by
6670: a weekly cron job.
6671:
1.6 rillig 6672: 19.1.11. How to handle incrementing versions when fixing an existing package
1.1 dsieger 6673:
6674: When making fixes to an existing package it can be useful to change the version
6675: number in PKGNAME. To avoid conflicting with future versions by the original
6676: author, a "nb1", "nb2", ... suffix can be used on package versions by setting
6677: PKGREVISION=1 (2, ...). The "nb" is treated like a "." by the package tools.
6678: e.g.
6679:
6680: DISTNAME= foo-17.42
6681: PKGREVISION= 9
6682:
6683:
6684: will result in a PKGNAME of "foo-17.42nb9". If you want to use the original
6685: value of PKGNAME without the "nbX" suffix, e.g. for setting DIST_SUBDIR, use
6686: PKGNAME_NOREV.
6687:
6688: When a new release of the package is released, the PKGREVISION should be
6689: removed, e.g. on a new minor release of the above package, things should be
6690: like:
6691:
6692: DISTNAME= foo-17.43
6693:
6694:
6695: PKGREVISION should be incremented for any non-trivial change in the resulting
6696: binary package. Without a PKGREVISION bump, someone with the previous version
6697: installed has no way of knowing that their package is out of date. Thus,
6698: changes without increasing PKGREVISION are essentially labeled "this is so
6699: trivial that no reasonable person would want to upgrade", and this is the rough
6700: test for when increasing PKGREVISION is appropriate. Examples of changes that
6701: do not merit increasing PKGREVISION are:
6702:
1.14 jmcneill 6703: * Changing HOMEPAGE, MAINTAINER, OWNER, or comments in Makefile.
1.1 dsieger 6704:
6705: * Changing build variables if the resulting binary package is the same.
6706:
6707: * Changing DESCR.
6708:
6709: * Adding PKG_OPTIONS if the default options don't change.
6710:
6711: Examples of changes that do merit an increase to PKGREVISION include:
6712:
6713: * Security fixes
6714:
6715: * Changes or additions to a patch file
6716:
6717: * Changes to the PLIST
6718:
1.12 weinem 6719: * A dependency is changed or renamed.
6720:
1.1 dsieger 6721: PKGREVISION must also be incremented when dependencies have ABI changes.
6722:
1.6 rillig 6723: 19.1.12. Substituting variable text in the package files (the SUBST framework)
1.1 dsieger 6724:
6725: When you want to replace the same text in multiple files or when the
6726: replacement text varies, patches alone cannot help. This is where the SUBST
6727: framework comes in. It provides an easy-to-use interface for replacing text in
6728: files. Example:
6729:
6730: SUBST_CLASSES+= fix-paths
6731: SUBST_STAGE.fix-paths= pre-configure
6732: SUBST_MESSAGE.fix-paths= Fixing absolute paths.
6733: SUBST_FILES.fix-paths= src/*.c
6734: SUBST_FILES.fix-paths+= scripts/*.sh
6735: SUBST_SED.fix-paths= -e 's,"/usr/local,"${PREFIX},g'
6736: SUBST_SED.fix-paths+= -e 's,"/var/log,"${VARBASE}/log,g'
6737:
6738:
6739: SUBST_CLASSES is a list of identifiers that are used to identify the different
6740: SUBST blocks that are defined. The SUBST framework is heavily used by pkgsrc,
6741: so it is important to always use the += operator with this variable. Otherwise
6742: some substitutions may be skipped.
6743:
6744: The remaining variables of each SUBST block are parameterized with the
6745: identifier from the first line (fix-paths in this case.) They can be seen as
6746: parameters to a function call.
6747:
6748: SUBST_STAGE.* specifies the stage at which the replacement will take place. All
6749: combinations of pre-, do- and post- together with a phase name are possible,
6750: though only few are actually used. Most commonly used are post-patch and
6751: pre-configure. Of these two, pre-configure should be preferred because then it
6752: is possible to run bmake patch and have the state after applying the patches
6753: but before making any other changes. This is especially useful when you are
6754: debugging a package in order to create new patches for it. Similarly,
6755: post-build is preferred over pre-install, because the install phase should
6756: generally be kept as simple as possible. When you use post-build, you have the
6757: same files in the working directory that will be installed later, so you can
6758: check if the substitution has succeeded.
6759:
6760: SUBST_MESSAGE.* is an optional text that is printed just before the
6761: substitution is done.
6762:
6763: SUBST_FILES.* is the list of shell globbing patterns that specifies the files
6764: in which the substitution will take place. The patterns are interpreted
6765: relatively to the WRKSRC directory.
6766:
6767: SUBST_SED.* is a list of arguments to sed(1) that specify the actual
6768: substitution. Every sed command should be prefixed with -e, so that all SUBST
6769: blocks look uniform.
6770:
6771: There are some more variables, but they are so seldomly used that they are only
6772: documented in the mk/subst.mk file.
6773:
1.6 rillig 6774: 19.2. Fixing problems in the fetch phase
1.1 dsieger 6775:
1.6 rillig 6776: 19.2.1. Packages whose distfiles aren't available for plain downloading
1.1 dsieger 6777:
6778: If you need to download from a dynamic URL you can set DYNAMIC_MASTER_SITES and
6779: a make fetch will call files/getsite.sh with the name of each file to download
6780: as an argument, expecting it to output the URL of the directory from which to
6781: download it. graphics/ns-cult3d is an example of this usage.
6782:
6783: If the download can't be automated, because the user must submit personal
6784: information to apply for a password, or must pay for the source, or whatever,
6785: you can set FETCH_MESSAGE to a list of lines that are displayed to the user
6786: before aborting the build. Example:
6787:
6788: FETCH_MESSAGE= "Please download the files"
6789: FETCH_MESSAGE+= " "${DISTFILES:Q}
6790: FETCH_MESSAGE+= "manually from "${MASTER_SITES:Q}"."
6791:
6792:
1.6 rillig 6793: 19.2.2. How to handle modified distfiles with the 'old' name
1.1 dsieger 6794:
6795: Sometimes authors of a software package make some modifications after the
6796: software was released, and they put up a new distfile without changing the
6797: package's version number. If a package is already in pkgsrc at that time, the
6798: checksum will no longer match. The contents of the new distfile should be
6799: compared against the old one before changing anything, to make sure the
6800: distfile was really updated on purpose, and that no trojan horse or so crept
6801: in. Please mention that the distfiles were compared and what was found in your
1.54 rodent 6802: commit message.
6803:
6804: Then, the correct way to work around this is to set DIST_SUBDIR to a unique
6805: directory name, usually based on PKGNAME_NOREV. All DISTFILES and PATCHFILES
6806: for this package will be put in that subdirectory of the local distfiles
6807: directory. (See Section 19.1.11, "How to handle incrementing versions when
6808: fixing an existing package" for more details.) In case this happens more often,
6809: PKGNAME can be used (thus including the nbX suffix) or a date stamp can be
6810: appended, like ${PKGNAME_NOREV}-YYYYMMDD.
6811:
6812: DIST_SUBDIR is also used when a distfile's name does not contain a version and
6813: the distfile is apt to change. In cases where the likelihood of this is very
6814: small, DIST_SUBDIR might not be required. Additionally, DIST_SUBDIR must not be
6815: removed unless the distfile name changes, even if a package is being moved or
6816: renamed.
6817:
6818: Do not forget regenerating the distinfo file after that, since it contains the
6819: DIST_SUBDIR path in the filenames. Also, increase the PKGREVISION if the
6820: installed package is different. Furthermore, a mail to the package's authors
6821: seems appropriate telling them that changing distfiles after releases without
6822: changing the file names is not good practice.
1.1 dsieger 6823:
1.6 rillig 6824: 19.3. Fixing problems in the configure phase
1.1 dsieger 6825:
1.6 rillig 6826: 19.3.1. Shared libraries - libtool
1.1 dsieger 6827:
6828: pkgsrc supports many different machines, with different object formats like
6829: a.out and ELF, and varying abilities to do shared library and dynamic loading
6830: at all. To accompany this, varying commands and options have to be passed to
6831: the compiler, linker, etc. to get the Right Thing, which can be pretty annoying
6832: especially if you don't have all the machines at your hand to test things. The
6833: devel/libtool pkg can help here, as it just "knows" how to build both static
6834: and dynamic libraries from a set of source files, thus being
6835: platform-independent.
6836:
6837: Here's how to use libtool in a package in seven simple steps:
6838:
6839: 1. Add USE_LIBTOOL=yes to the package Makefile.
6840:
6841: 2. For library objects, use "${LIBTOOL} --mode=compile ${CC}" in place of "$
6842: {CC}". You could even add it to the definition of CC, if only libraries are
6843: being built in a given Makefile. This one command will build both PIC and
6844: non-PIC library objects, so you need not have separate shared and
6845: non-shared library rules.
6846:
6847: 3. For the linking of the library, remove any "ar", "ranlib", and "ld
6848: -Bshareable" commands, and instead use:
6849:
6850: ${LIBTOOL} --mode=link \
6851: ${CC} -o ${.TARGET:.a=.la} \
6852: ${OBJS:.o=.lo} \
6853: -rpath ${PREFIX}/lib \
6854: -version-info major:minor
6855:
6856:
6857: Note that the library is changed to have a .la extension, and the objects
6858: are changed to have a .lo extension. Change OBJS as necessary. This
6859: automatically creates all of the .a, .so.major.minor, and ELF symlinks (if
6860: necessary) in the build directory. Be sure to include "-version-info",
6861: especially when major and minor are zero, as libtool will otherwise strip
6862: off the shared library version.
6863:
6864: From the libtool manual:
6865:
6866: So, libtool library versions are described by three integers:
6867:
6868: CURRENT
6869: The most recent interface number that this library implements.
6870:
6871: REVISION
6872: The implementation number of the CURRENT interface.
6873:
6874: AGE
6875: The difference between the newest and oldest interfaces that
6876: this library implements. In other words, the library implements
6877: all the interface numbers in the range from number `CURRENT -
6878: AGE' to `CURRENT'.
6879:
6880: If two libraries have identical CURRENT and AGE numbers, then the
6881: dynamic linker chooses the library with the greater REVISION number.
6882:
6883:
6884: The "-release" option will produce different results for a.out and ELF
1.25 wiz 6885: (excluding symlinks) in only one case. An ELF library of the form "
6886: libfoo-release.so.x.y" will have a symlink of "libfoo.so.x.y" on an a.out
1.1 dsieger 6887: platform. This is handled automatically.
6888:
6889: The "-rpath argument" is the install directory of the library being built.
6890:
6891: In the PLIST, include only the .la file, the other files will be added
6892: automatically.
6893:
6894: 4. When linking shared object (.so) files, i.e. files that are loaded via
6895: dlopen(3), NOT shared libraries, use "-module -avoid-version" to prevent
6896: them getting version tacked on.
6897:
6898: The PLIST file gets the foo.so entry.
6899:
6900: 5. When linking programs that depend on these libraries before they are
6901: installed, preface the cc(1) or ld(1) line with "${LIBTOOL} --mode=link",
6902: and it will find the correct libraries (static or shared), but please be
6903: aware that libtool will not allow you to specify a relative path in -L
6904: (such as "-L../somelib"), because it expects you to change that argument to
6905: be the .la file. e.g.
6906:
6907: ${LIBTOOL} --mode=link ${CC} -o someprog -L../somelib -lsomelib
6908:
6909:
6910: should be changed to:
6911:
6912: ${LIBTOOL} --mode=link ${CC} -o someprog ../somelib/somelib.la
6913:
6914:
6915: and it will do the right thing with the libraries.
6916:
6917: 6. When installing libraries, preface the install(1) or cp(1) command with "$
6918: {LIBTOOL} --mode=install", and change the library name to .la. e.g.
6919:
1.23 jakllsch 6920: ${LIBTOOL} --mode=install ${BSD_INSTALL_LIB} ${SOMELIB:.a=.la} ${PREFIX}/lib
1.1 dsieger 6921:
6922:
6923: This will install the static .a, shared library, any needed symlinks, and
6924: run ldconfig(8).
6925:
6926: 7. In your PLIST, include only the .la file (this is a change from previous
6927: behaviour).
6928:
1.6 rillig 6929: 19.3.2. Using libtool on GNU packages that already support libtool
1.1 dsieger 6930:
6931: Add USE_LIBTOOL=yes to the package Makefile. This will override the package's
6932: own libtool in most cases. For older libtool using packages, libtool is made by
6933: ltconfig script during the do-configure step; you can check the libtool script
6934: location by doing make configure; find work*/ -name libtool.
6935:
6936: LIBTOOL_OVERRIDE specifies which libtool scripts, relative to WRKSRC, to
6937: override. By default, it is set to "libtool */libtool */*/libtool". If this
6938: does not match the location of the package's libtool script(s), set it as
6939: appropriate.
6940:
6941: If you do not need *.a static libraries built and installed, then use
6942: SHLIBTOOL_OVERRIDE instead.
6943:
6944: If your package makes use of the platform-independent library for loading
6945: dynamic shared objects, that comes with libtool (libltdl), you should include
6946: devel/libltdl/buildlink3.mk.
6947:
6948: Some packages use libtool incorrectly so that the package may not work or build
6949: in some circumstances. Some of the more common errors are:
6950:
6951: * The inclusion of a shared object (-module) as a dependent library in an
6952: executable or library. This in itself isn't a problem if one of two things
6953: has been done:
6954:
6955: 1. The shared object is named correctly, i.e. libfoo.la, not foo.la
6956:
6957: 2. The -dlopen option is used when linking an executable.
6958:
6959: * The use of libltdl without the correct calls to initialisation routines.
6960: The function lt_dlinit() should be called and the macro
6961: LTDL_SET_PRELOADED_SYMBOLS included in executables.
6962:
1.6 rillig 6963: 19.3.3. GNU Autoconf/Automake
1.1 dsieger 6964:
6965: If a package needs GNU autoconf or automake to be executed to regenerate the
6966: configure script and Makefile.in makefile templates, then they should be
6967: executed in a pre-configure target.
6968:
6969: For packages that need only autoconf:
6970:
6971: AUTOCONF_REQD= 2.50 # if default version is not good enough
6972: USE_TOOLS+= autoconf # use "autoconf213" for autoconf-2.13
6973: ...
6974:
6975: pre-configure:
6976: cd ${WRKSRC} && autoconf
6977:
6978: ...
6979:
6980:
6981: and for packages that need automake and autoconf:
6982:
6983: AUTOMAKE_REQD= 1.7.1 # if default version is not good enough
6984: USE_TOOLS+= automake # use "automake14" for automake-1.4
6985: ...
6986:
6987: pre-configure:
6988: set -e; cd ${WRKSRC}; \
6989: aclocal; autoheader; automake -a --foreign -i; autoconf
6990:
6991: ...
6992:
6993:
6994: Packages which use GNU Automake will almost certainly require GNU Make.
6995:
6996: There are times when the configure process makes additional changes to the
6997: generated files, which then causes the build process to try to re-execute the
6998: automake sequence. This is prevented by touching various files in the configure
6999: stage. If this causes problems with your package you can set AUTOMAKE_OVERRIDE=
7000: NO in the package Makefile.
7001:
1.6 rillig 7002: 19.4. Programming languages
1.1 dsieger 7003:
1.6 rillig 7004: 19.4.1. C, C++, and Fortran
1.1 dsieger 7005:
7006: Compilers for the C, C++, and Fortran languages comes with the NetBSD base
7007: system. By default, pkgsrc assumes that a package is written in C and will hide
1.6 rillig 7008: all other compilers (via the wrapper framework, see Chapter 14, Buildlink
1.1 dsieger 7009: methodology).
7010:
7011: To declare which language's compiler a package needs, set the USE_LANGUAGES
7012: variable. Allowed values currently are "c", "c++", and "fortran" (and any
7013: combination). The default is "c". Packages using GNU configure scripts, even if
7014: written in C++, usually need a C compiler for the configure phase.
7015:
1.6 rillig 7016: 19.4.2. Java
1.1 dsieger 7017:
7018: If a program is written in Java, use the Java framework in pkgsrc. The package
7019: must include ../../mk/java-vm.mk. This Makefile fragment provides the following
7020: variables:
7021:
7022: * USE_JAVA defines if a build dependency on the JDK is added. If USE_JAVA is
7023: set to "run", then there is only a runtime dependency on the JDK. The
7024: default is "yes", which also adds a build dependency on the JDK.
7025:
7026: * Set USE_JAVA2 to declare that a package needs a Java2 implementation. The
7027: supported values are "yes", "1.4", and "1.5". "yes" accepts any Java2
7028: implementation, "1.4" insists on versions 1.4 or above, and "1.5" only
7029: accepts versions 1.5 or above. This variable is not set by default.
7030:
1.25 wiz 7031: * PKG_JAVA_HOME is automatically set to the runtime location of the used Java
7032: implementation dependency. It may be used to set JAVA_HOME to a good value
7033: if the program needs this variable to be defined.
7034:
1.6 rillig 7035: 19.4.3. Packages containing perl scripts
1.1 dsieger 7036:
7037: If your package contains interpreted perl scripts, add "perl" to the USE_TOOLS
7038: variable and set REPLACE_PERL to ensure that the proper interpreter path is
7039: set. REPLACE_PERL should contain a list of scripts, relative to WRKSRC, that
1.74 wiz 7040: you want adjusted. Every occurrence of */bin/perl in a she-bang line will be
7041: replaced with the full path to the perl executable.
1.1 dsieger 7042:
7043: If a particular version of perl is needed, set the PERL5_REQD variable to the
7044: version number. The default is "5.0".
7045:
1.6 rillig 7046: See Section 19.6.6, "Packages installing perl modules" for information about
1.1 dsieger 7047: handling perl modules.
7048:
1.41 wiz 7049: 19.4.4. Packages containing shell scripts
7050:
7051: REPLACE_SH, REPLACE_BASH, REPLACE_CSH, and REPLACE_KSH can be used to replace
7052: shell hash bangs in files. Please use the appropriate one, prefering REPLACE_SH
1.74 wiz 7053: in case this shell is sufficient. Each should contain a list of scripts,
7054: relative to WRKSRC, that you want adjusted. Every occurrence of the matching
7055: shell in a she-bang line will be replaced with the full path to the shell
7056: executable. When using REPLACE_BASH, don't forget to add bash to USE_TOOLS.
1.41 wiz 7057:
7058: 19.4.5. Other programming languages
1.1 dsieger 7059:
7060: Currently, there is no special handling for other languages in pkgsrc. If a
7061: compiler package provides a buildlink3.mk file, include that, otherwise just
7062: add a (build) dependency on the appropriate compiler package.
7063:
1.6 rillig 7064: 19.5. Fixing problems in the build phase
1.1 dsieger 7065:
7066: The most common failures when building a package are that some platforms do not
7067: provide certain header files, functions or libraries, or they provide the
7068: functions in a library that the original package author didn't know. To work
7069: around this, you can rewrite the source code in most cases so that it does not
7070: use the missing functions or provides a replacement function.
7071:
1.6 rillig 7072: 19.5.1. Compiling C and C++ code conditionally
1.1 dsieger 7073:
7074: If a package already comes with a GNU configure script, the preferred way to
7075: fix the build failure is to change the configure script, not the code. In the
7076: other cases, you can utilize the C preprocessor, which defines certain macros
7077: depending on the operating system and hardware architecture it compiles for.
7078: These macros can be queried using for example #if defined(__i386). Almost every
7079: operating system, hardware architecture and compiler has its own macro. For
7080: example, if the macros __GNUC__, __i386__ and __NetBSD__ are all defined, you
7081: know that you are using NetBSD on an i386 compatible CPU, and your compiler is
7082: GCC.
7083:
7084: The list of the following macros for hardware and operating system depends on
7085: the compiler that is used. For example, if you want to conditionally compile
7086: code on Solaris, don't use __sun__, as the SunPro compiler does not define it.
7087: Use __sun instead.
7088:
1.6 rillig 7089: 19.5.1.1. C preprocessor macros to identify the operating system
1.1 dsieger 7090:
7091: To distinguish between 4.4 BSD-derived systems and the rest of the world, you
7092: should use the following code.
7093:
7094: #include <sys/param.h>
7095: #if (defined(BSD) && BSD >= 199306)
7096: /* BSD-specific code goes here */
7097: #else
7098: /* non-BSD-specific code goes here */
7099: #endif
7100:
7101: If this distinction is not fine enough, you can also test for the following
7102: macros.
7103:
1.46 obache 7104: Cygwin __CYGWIN__
7105: DragonFly __DragonFly__
1.1 dsieger 7106: FreeBSD __FreeBSD__
1.46 obache 7107: Haiku __HAIKU__
1.1 dsieger 7108: Interix __INTERIX
7109: IRIX __sgi (TODO: get a definite source for this)
7110: Linux linux, __linux, __linux__
1.46 obache 7111: MirBSD __MirBSD__ (__OpenBSD__ is also defined)
7112: Minix3 __minix
1.1 dsieger 7113: NetBSD __NetBSD__
7114: OpenBSD __OpenBSD__
7115: Solaris sun, __sun
7116:
1.6 rillig 7117: 19.5.1.2. C preprocessor macros to identify the hardware architecture
1.1 dsieger 7118:
7119: i386 i386, __i386, __i386__
7120: MIPS __mips
7121: SPARC sparc, __sparc
7122:
1.6 rillig 7123: 19.5.1.3. C preprocessor macros to identify the compiler
1.1 dsieger 7124:
7125: GCC __GNUC__ (major version), __GNUC_MINOR__
7126: MIPSpro _COMPILER_VERSION (0x741 for MIPSpro 7.41)
7127: SunPro __SUNPRO_C (0x570 for Sun C 5.7)
7128: SunPro C++ __SUNPRO_CC (0x580 for Sun C++ 5.8)
7129:
1.6 rillig 7130: 19.5.2. How to handle compiler bugs
1.1 dsieger 7131:
7132: Some source files trigger bugs in the compiler, based on combinations of
7133: compiler version and architecture and almost always relation to optimisation
7134: being enabled. Common symptoms are gcc internal errors or never finishing
7135: compiling a file.
7136:
7137: Typically, a workaround involves testing the MACHINE_ARCH and compiler version,
7138: disabling optimisation for that combination of file, MACHINE_ARCH and compiler,
7139: and documenting it in pkgsrc/doc/HACKS. See that file for a number of examples.
7140:
1.6 rillig 7141: 19.5.3. Undefined reference to "..."
1.1 dsieger 7142:
7143: This error message often means that a package did not link to a shared library
7144: it needs. The following functions are known to cause this error message over
7145: and over.
7146:
7147: +-----------------------------------------------------+
7148: | Function |Library |Affected platforms|
7149: |-------------------------+--------+------------------|
7150: |accept, bind, connect |-lsocket|Solaris |
7151: |-------------------------+--------+------------------|
7152: |crypt |-lcrypt |DragonFly, NetBSD |
7153: |-------------------------+--------+------------------|
7154: |dlopen, dlsym |-ldl |Linux |
7155: |-------------------------+--------+------------------|
7156: |gethost* |-lnsl |Solaris |
7157: |-------------------------+--------+------------------|
7158: |inet_aton |-lresolv|Solaris |
7159: |-------------------------+--------+------------------|
7160: |nanosleep, sem_*, timer_*|-lrt |Solaris |
7161: |-------------------------+--------+------------------|
7162: |openpty |-lutil |Linux |
7163: +-----------------------------------------------------+
7164:
7165: To fix these linker errors, it is often sufficient to say LIBS.OperatingSystem+
7166: = -lfoo to the package Makefile and then say bmake clean; bmake.
7167:
1.6 rillig 7168: 19.5.3.1. Special issue: The SunPro compiler
1.1 dsieger 7169:
7170: When you are using the SunPro compiler, there is another possibility. That
7171: compiler cannot handle the following code:
7172:
7173: extern int extern_func(int);
7174:
7175: static inline int
7176: inline_func(int x)
7177: {
7178: return extern_func(x);
7179: }
7180:
7181: int main(void)
7182: {
7183: return 0;
7184: }
7185:
7186: It generates the code for inline_func even if that function is never used. This
7187: code then refers to extern_func, which can usually not be resolved. To solve
7188: this problem you can try to tell the package to disable inlining of functions.
7189:
1.6 rillig 7190: 19.5.4. Running out of memory
1.1 dsieger 7191:
7192: Sometimes packages fail to build because the compiler runs into an operating
7193: system specific soft limit. With the UNLIMIT_RESOURCES variable pkgsrc can be
7194: told to unlimit the resources. Currently, the allowed values are "datasize" and
7195: "stacksize" (or both). Setting this variable is similar to running the shell
7196: builtin ulimit command to raise the maximum data segment size or maximum stack
7197: size of a process, respectively, to their hard limits.
7198:
1.6 rillig 7199: 19.6. Fixing problems in the install phase
1.1 dsieger 7200:
1.6 rillig 7201: 19.6.1. Creating needed directories
1.1 dsieger 7202:
7203: The BSD-compatible install supplied with some operating systems cannot create
7204: more than one directory at a time. As such, you should call ${INSTALL_*_DIR}
7205: like this:
7206:
7207: ${INSTALL_DATA_DIR} ${PREFIX}/dir1
7208: ${INSTALL_DATA_DIR} ${PREFIX}/dir2
7209:
7210:
7211: You can also just append "dir1 dir2" to the INSTALLATION_DIRS variable, which
7212: will automatically do the right thing.
7213:
1.6 rillig 7214: 19.6.2. Where to install documentation
1.1 dsieger 7215:
7216: In general, documentation should be installed into ${PREFIX}/share/doc/$
7217: {PKGBASE} or ${PREFIX}/share/doc/${PKGNAME} (the latter includes the version
7218: number of the package).
7219:
7220: Many modern packages using GNU autoconf allow to set the directory where HTML
7221: documentation is installed with the "--with-html-dir" option. Sometimes using
7222: this flag is needed because otherwise the documentation ends up in ${PREFIX}/
7223: share/doc/html or other places.
7224:
7225: An exception to the above is that library API documentation generated with the
7226: textproc/gtk-doc tools, for use by special browsers (devhelp) should be left at
7227: their default location, which is ${PREFIX}/share/gtk-doc. Such documentation
7228: can be recognized from files ending in .devhelp or .devhelp2. (It is also
7229: acceptable to install such files in ${PREFIX}/share/doc/${PKGBASE} or ${PREFIX}
7230: /share/doc/${PKGNAME}; the .devhelp* file must be directly in that directory
7231: then, no additional subdirectory level is allowed in this case. This is usually
7232: achieved by using "--with-html-dir=${PREFIX}/share/doc". ${PREFIX}/share/
7233: gtk-doc is preferred though.)
7234:
1.6 rillig 7235: 19.6.3. Installing highscore files
1.1 dsieger 7236:
7237: Certain packages, most of them in the games category, install a score file that
7238: allows all users on the system to record their highscores. In order for this to
7239: work, the binaries need to be installed setgid and the score files owned by the
1.36 wiz 7240: appropriate group and/or owner (traditionally the "games" user/group). Set
7241: USE_GAMESGROUP to yes to support this. The following variables, documented in
7242: more detail in mk/defaults/mk.conf, control this behaviour: GAMEDATAMODE,
7243: GAMEDIRMODE, GAMES_GROUP, GAMEMODE, GAME_USER.
1.1 dsieger 7244:
1.14 jmcneill 7245: A package should therefore never hard code file ownership or access permissions
1.1 dsieger 7246: but rely on INSTALL_GAME and INSTALL_GAME_DATA to set these correctly.
7247:
1.6 rillig 7248: 19.6.4. Adding DESTDIR support to packages
1.4 rillig 7249:
1.14 jmcneill 7250: DESTDIR support means that a package installs into a staging directory, not the
7251: final location of the files. Then a binary package is created which can be used
7252: for installation as usual. There are two ways: Either the package must install
1.25 wiz 7253: as root ("destdir") or the package can install as non-root user ("user-destdir"
7254: ).
1.14 jmcneill 7255:
1.39 wiz 7256: * PKG_DESTDIR_SUPPORT has to be set to "none", "destdir", or "user-destdir".
7257: By default PKG_DESTDIR_SUPPORT is set to "user-destdir" to help catching
7258: more potential packaging problems. If bsd.prefs.mk is included in the
7259: Makefile, PKG_DESTDIR_SUPPORT needs to be set before the inclusion.
1.14 jmcneill 7260:
1.4 rillig 7261: * All installation operations have to be prefixed with ${DESTDIR}.
7262:
7263: * automake gets this DESTDIR mostly right automatically. Many manual rules
7264: and pre/post-install often are incorrect; fix them.
7265:
1.17 imil 7266: * If files are installed with special owner/group use SPECIAL_PERMS.
1.4 rillig 7267:
7268: * In general, packages should support UNPRIVILEGED to be able to use DESTDIR.
7269:
1.6 rillig 7270: 19.6.5. Packages with hardcoded paths to other interpreters
1.1 dsieger 7271:
7272: Your package may also contain scripts with hardcoded paths to other
7273: interpreters besides (or as well as) perl. To correct the full pathname to the
7274: script interpreter, you need to set the following definitions in your Makefile
7275: (we shall use tclsh in this example):
7276:
7277: REPLACE_INTERPRETER+= tcl
7278: REPLACE.tcl.old= .*/bin/tclsh
7279: REPLACE.tcl.new= ${PREFIX}/bin/tclsh
7280: REPLACE_FILES.tcl= # list of tcl scripts which need to be fixed,
7281: # relative to ${WRKSRC}, just as in REPLACE_PERL
7282:
7283:
7284: Note
7285:
7286: Before March 2006, these variables were called _REPLACE.* and _REPLACE_FILES.*.
7287:
1.6 rillig 7288: 19.6.6. Packages installing perl modules
1.1 dsieger 7289:
7290: Makefiles of packages providing perl5 modules should include the Makefile
7291: fragment ../../lang/perl5/module.mk. It provides a do-configure target for the
7292: standard perl configuration for such modules as well as various hooks to tune
7293: this configuration. See comments in this file for details.
7294:
7295: Perl5 modules will install into different places depending on the version of
7296: perl used during the build process. To address this, pkgsrc will append lines
7297: to the PLIST corresponding to the files listed in the installed .packlist file
7298: generated by most perl5 modules. This is invoked by defining PERL5_PACKLIST to
1.48 wiz 7299: a space-separated list of packlist files relative to PERL5_PACKLIST_DIR
7300: (PERL5_INSTALLVENDORARCH by default), e.g.:
1.1 dsieger 7301:
1.48 wiz 7302: PERL5_PACKLIST= auto/Pg/.packlist
1.1 dsieger 7303:
7304:
1.48 wiz 7305: The perl5 config variables installarchlib, installscript, installvendorbin,
7306: installvendorscript, installvendorarch, installvendorlib, installvendorman1dir,
7307: and installvendorman3dir represent those locations in which components of perl5
7308: modules may be installed, provided as variable with uppercase and prefixed with
7309: PERL5_, e.g. PERL5_INSTALLARCHLIB and may be used by perl5 packages that don't
7310: have a packlist. These variables are also substituted for in the PLIST as
7311: uppercase prefixed with PERL5_SUB_.
1.1 dsieger 7312:
1.6 rillig 7313: 19.6.7. Packages installing info files
1.1 dsieger 7314:
7315: Some packages install info files or use the "makeinfo" or "install-info"
7316: commands. INFO_FILES should be defined in the package Makefile so that INSTALL
7317: and DEINSTALL scripts will be generated to handle registration of the info
7318: files in the Info directory file. The "install-info" command used for the info
7319: files registration is either provided by the system, or by a special purpose
7320: package automatically added as dependency if needed.
7321:
7322: PKGINFODIR is the directory under ${PREFIX} where info files are primarily
7323: located. PKGINFODIR defaults to "info" and can be overridden by the user.
7324:
7325: The info files for the package should be listed in the package PLIST; however
7326: any split info files need not be listed.
7327:
7328: A package which needs the "makeinfo" command at build time must add "makeinfo"
7329: to USE_TOOLS in its Makefile. If a minimum version of the "makeinfo" command is
7330: needed it should be noted with the TEXINFO_REQD variable in the package
7331: Makefile. By default, a minimum version of 3.12 is required. If the system does
7332: not provide a makeinfo command or if it does not match the required minimum, a
7333: build dependency on the devel/gtexinfo package will be added automatically.
7334:
7335: The build and installation process of the software provided by the package
7336: should not use the install-info command as the registration of info files is
1.25 wiz 7337: the task of the package INSTALL script, and it must use the appropriate
1.1 dsieger 7338: makeinfo command.
7339:
7340: To achieve this goal, the pkgsrc infrastructure creates overriding scripts for
7341: the install-info and makeinfo commands in a directory listed early in PATH.
7342:
7343: The script overriding install-info has no effect except the logging of a
7344: message. The script overriding makeinfo logs a message and according to the
7345: value of TEXINFO_REQD either runs the appropriate makeinfo command or exit on
7346: error.
7347:
1.6 rillig 7348: 19.6.8. Packages installing man pages
1.1 dsieger 7349:
7350: All packages that install manual pages should install them into the same
7351: directory, so that there is one common place to look for them. In pkgsrc, this
7352: place is ${PREFIX}/${PKGMANDIR}, and this expression should be used in
1.25 wiz 7353: packages. The default for PKGMANDIR is "man". Another often-used value is "
7354: share/man".
1.1 dsieger 7355:
7356: Note
7357:
7358: The support for a custom PKGMANDIR is far from complete.
7359:
7360: The PLIST files can just use man/ as the top level directory for the man page
7361: file entries, and the pkgsrc framework will convert as needed. In all other
7362: places, the correct PKGMANDIR must be used.
7363:
7364: Packages that are configured with GNU_CONFIGURE set as "yes", by default will
7365: use the ./configure --mandir switch to set where the man pages should be
7366: installed. The path is GNU_CONFIGURE_MANDIR which defaults to ${PREFIX}/$
7367: {PKGMANDIR}.
7368:
7369: Packages that use GNU_CONFIGURE but do not use --mandir, can set
7370: CONFIGURE_HAS_MANDIR to "no". Or if the ./configure script uses a non-standard
7371: use of --mandir, you can set GNU_CONFIGURE_MANDIR as needed.
7372:
1.6 rillig 7373: See Section 13.5, "Man page compression" for information on installation of
1.1 dsieger 7374: compressed manual pages.
7375:
1.7 rillig 7376: 19.6.9. Packages installing GConf data files
1.1 dsieger 7377:
1.7 rillig 7378: If a package installs .schemas or .entries files, used by GConf, you need to
1.1 dsieger 7379: take some extra steps to make sure they get registered in the database:
7380:
1.7 rillig 7381: 1. Include ../../devel/GConf/schemas.mk instead of its buildlink3.mk file.
7382: This takes care of rebuilding the GConf database at installation and
7383: deinstallation time, and tells the package where to install GConf data
1.1 dsieger 7384: files using some standard configure arguments. It also disallows any access
7385: to the database directly from the package.
7386:
7387: 2. Ensure that the package installs its .schemas files under ${PREFIX}/share/
7388: gconf/schemas. If they get installed under ${PREFIX}/etc, you will need to
7389: manually patch the package.
7390:
7391: 3. Check the PLIST and remove any entries under the etc/gconf directory, as
1.65 wiz 7392: they will be handled automatically. See Section 9.14, "How do I change the
1.1 dsieger 7393: location of configuration files?" for more information.
7394:
1.7 rillig 7395: 4. Define the GCONF_SCHEMAS variable in your Makefile with a list of all
1.1 dsieger 7396: .schemas files installed by the package, if any. Names must not contain any
7397: directories in them.
7398:
1.7 rillig 7399: 5. Define the GCONF_ENTRIES variable in your Makefile with a list of all
1.1 dsieger 7400: .entries files installed by the package, if any. Names must not contain any
7401: directories in them.
7402:
1.18 mishka 7403: 19.6.10. Packages installing scrollkeeper/rarian data files
1.1 dsieger 7404:
1.18 mishka 7405: If a package installs .omf files, used by scrollkeeper/rarian, you need to take
7406: some extra steps to make sure they get registered in the database:
1.1 dsieger 7407:
1.18 mishka 7408: 1. Include ../../mk/omf-scrollkeeper.mk instead of rarian's buildlink3.mk
7409: file. This takes care of rebuilding the scrollkeeper database at
7410: installation and deinstallation time, and disallows any access to it
7411: directly from the package.
1.1 dsieger 7412:
7413: 2. Check the PLIST and remove any entries under the libdata/scrollkeeper
7414: directory, as they will be handled automatically.
7415:
7416: 3. Remove the share/omf directory from the PLIST. It will be handled by
1.18 mishka 7417: rarian. (make print-PLIST does this automatically.)
1.1 dsieger 7418:
1.6 rillig 7419: 19.6.11. Packages installing X11 fonts
1.1 dsieger 7420:
7421: If a package installs font files, you will need to rebuild the fonts database
7422: in the directory where they get installed at installation and deinstallation
7423: time. This can be automatically done by using the pkginstall framework.
7424:
7425: You can list the directories where fonts are installed in the FONTS_DIRS.type
7426: variables, where type can be one of "ttf", "type1" or "x11". Also make sure
7427: that the database file fonts.dir is not listed in the PLIST.
7428:
7429: Note that you should not create new directories for fonts; instead use the
7430: standard ones to avoid that the user needs to manually configure his X server
7431: to find them.
7432:
1.6 rillig 7433: 19.6.12. Packages installing GTK2 modules
1.1 dsieger 7434:
7435: If a package installs GTK2 immodules or loaders, you need to take some extra
7436: steps to get them registered in the GTK2 database properly:
7437:
7438: 1. Include ../../x11/gtk2/modules.mk instead of its buildlink3.mk file. This
7439: takes care of rebuilding the database at installation and deinstallation
7440: time.
7441:
7442: 2. Set GTK2_IMMODULES=YES if your package installs GTK2 immodules.
7443:
7444: 3. Set GTK2_LOADERS=YES if your package installs GTK2 loaders.
7445:
7446: 4. Patch the package to not touch any of the GTK2 databases directly. These
7447: are:
7448:
1.42 asau 7449: + libdata/gtk-2.0/gdk-pixbuf.loaders
1.1 dsieger 7450:
1.42 asau 7451: + libdata/gtk-2.0/gtk.immodules
1.1 dsieger 7452:
7453: 5. Check the PLIST and remove any entries under the libdata/gtk-2.0 directory,
7454: as they will be handled automatically.
7455:
1.6 rillig 7456: 19.6.13. Packages installing SGML or XML data
1.1 dsieger 7457:
7458: If a package installs SGML or XML data files that need to be registered in
7459: system-wide catalogs (like DTDs, sub-catalogs, etc.), you need to take some
7460: extra steps:
7461:
7462: 1. Include ../../textproc/xmlcatmgr/catalogs.mk in your Makefile, which takes
7463: care of registering those files in system-wide catalogs at installation and
7464: deinstallation time.
7465:
7466: 2. Set SGML_CATALOGS to the full path of any SGML catalogs installed by the
7467: package.
7468:
7469: 3. Set XML_CATALOGS to the full path of any XML catalogs installed by the
7470: package.
7471:
7472: 4. Set SGML_ENTRIES to individual entries to be added to the SGML catalog.
7473: These come in groups of three strings; see xmlcatmgr(1) for more
7474: information (specifically, arguments recognized by the 'add' action). Note
7475: that you will normally not use this variable.
7476:
7477: 5. Set XML_ENTRIES to individual entries to be added to the XML catalog. These
7478: come in groups of three strings; see xmlcatmgr(1) for more information
7479: (specifically, arguments recognized by the 'add' action). Note that you
7480: will normally not use this variable.
7481:
1.6 rillig 7482: 19.6.14. Packages installing extensions to the MIME database
1.1 dsieger 7483:
7484: If a package provides extensions to the MIME database by installing .xml files
7485: inside ${PREFIX}/share/mime/packages, you need to take some extra steps to
7486: ensure that the database is kept consistent with respect to these new files:
7487:
7488: 1. Include ../../databases/shared-mime-info/mimedb.mk (avoid using the
7489: buildlink3.mk file from this same directory, which is reserved for
7490: inclusion from other buildlink3.mk files). It takes care of rebuilding the
7491: MIME database at installation and deinstallation time, and disallows any
7492: access to it directly from the package.
7493:
1.25 wiz 7494: 2. Check the PLIST and remove any entries under the share/mime directory,
1.1 dsieger 7495: except for files saved under share/mime/packages. The former are handled
7496: automatically by the update-mime-database program, but the latter are
7497: package-dependent and must be removed by the package that installed them in
7498: the first place.
7499:
7500: 3. Remove any share/mime/* directories from the PLIST. They will be handled by
7501: the shared-mime-info package.
7502:
1.6 rillig 7503: 19.6.15. Packages using intltool
1.1 dsieger 7504:
7505: If a package uses intltool during its build, add intltool to the USE_TOOLS,
7506: which forces it to use the intltool package provided by pkgsrc, instead of the
7507: one bundled with the distribution file.
7508:
7509: This tracks intltool's build-time dependencies and uses the latest available
7510: version; this way, the package benefits of any bug fixes that may have appeared
7511: since it was released.
7512:
1.6 rillig 7513: 19.6.16. Packages installing startup scripts
1.1 dsieger 7514:
7515: If a package contains a rc.d script, it won't be copied into the startup
7516: directory by default, but you can enable it, by adding the option
1.4 rillig 7517: PKG_RCD_SCRIPTS=YES in mk.conf. This option will copy the scripts into /etc/
7518: rc.d when a package is installed, and it will automatically remove the scripts
7519: when the package is deinstalled.
1.1 dsieger 7520:
1.6 rillig 7521: 19.6.17. Packages installing TeX modules
1.1 dsieger 7522:
7523: If a package installs TeX packages into the texmf tree, the ls-R database of
7524: the tree needs to be updated.
7525:
7526: Note
7527:
1.23 jakllsch 7528: Except the main TeX packages such as kpathsea, packages should install files
7529: into ${PREFIX}/share/texmf-dist, not ${PREFIX}/share/texmf.
1.1 dsieger 7530:
1.23 jakllsch 7531: 1. Include ../../print/kpathsea/texmf.mk. This takes care of rebuilding the
7532: ls-R database at installation and deinstallation time.
1.1 dsieger 7533:
1.23 jakllsch 7534: 2. If your package installs files into a texmf tree other than the one at $
7535: {PREFIX}/share/texmf-dist, set TEX_TEXMF_DIRS to the list of all texmf
7536: trees that need database update.
1.1 dsieger 7537:
7538: If your package also installs font map files that need to be registered
1.30 dholland 7539: using updmap, include ../../print/tex-tetex/map.mk and set TEX_MAP_FILES
7540: and/or TEX_MIXEDMAP_FILES to the list of all such font map files. Then
7541: updmap will be run automatically at installation/deinstallation to enable/
7542: disable font map files for TeX output drivers.
1.1 dsieger 7543:
7544: 3. Make sure that none of ls-R databases are included in PLIST, as they will
1.30 dholland 7545: be removed only by the kpathsea package.
1.1 dsieger 7546:
1.6 rillig 7547: 19.6.18. Packages supporting running binaries in emulation
1.1 dsieger 7548:
7549: There are some packages that provide libraries and executables for running
7550: binaries from a one operating system on a different one (if the latter supports
7551: it). One example is running Linux binaries on NetBSD.
7552:
7553: The pkgtools/rpm2pkg helps in extracting and packaging Linux rpm packages.
7554:
7555: The CHECK_SHLIBS can be set to no to avoid the check-shlibs target, which tests
7556: if all libraries for each installed executable can be found by the dynamic
7557: linker. Since the standard dynamic linker is run, this fails for emulation
7558: packages, because the libraries used by the emulation are not in the standard
7559: directories.
7560:
1.6 rillig 7561: 19.6.19. Packages installing hicolor theme icons
1.1 dsieger 7562:
7563: If a package installs images under the share/icons/hicolor and/or updates the
7564: share/icons/hicolor/icon-theme.cache database, you need to take some extra
7565: steps to make sure that the shared theme directory is handled appropriately and
7566: that the cache database is rebuilt:
7567:
7568: 1. Include ../../graphics/hicolor-icon-theme/buildlink3.mk.
7569:
7570: 2. Check the PLIST and remove the entry that refers to the theme cache.
7571:
7572: 3. Ensure that the PLIST does not remove the shared icon directories from the
7573: share/icons/hicolor hierarchy because they will be handled automatically.
7574:
7575: The best way to verify that the PLIST is correct with respect to the last two
7576: points is to regenerate it using make print-PLIST.
7577:
1.6 rillig 7578: 19.6.20. Packages installing desktop files
1.1 dsieger 7579:
7580: If a package installs .desktop files under share/applications and these include
1.54 rodent 7581: MIME information (MimeType key), you need to take extra steps to ensure that
7582: they are registered into the MIME database:
1.1 dsieger 7583:
7584: 1. Include ../../sysutils/desktop-file-utils/desktopdb.mk.
7585:
7586: 2. Check the PLIST and remove the entry that refers to the share/applications/
7587: mimeinfo.cache file. It will be handled automatically.
7588:
7589: The best way to verify that the PLIST is correct with respect to the last point
7590: is to regenerate it using make print-PLIST.
7591:
1.6 rillig 7592: 19.7. Marking packages as having problems
1.1 dsieger 7593:
1.23 jakllsch 7594: In some cases one does not have the time to solve a problem immediately. In
7595: this case, one can plainly mark a package as broken. For this, one just sets
7596: the variable BROKEN to the reason why the package is broken (similar to the
7597: RESTRICTED variable). A user trying to build the package will immediately be
7598: shown this message, and the build will not be even tried.
1.1 dsieger 7599:
1.23 jakllsch 7600: BROKEN packages are removed from pkgsrc in irregular intervals.
1.1 dsieger 7601:
1.6 rillig 7602: Chapter 20. Debugging
1.1 dsieger 7603:
7604: To check out all the gotchas when building a package, here are the steps that I
7605: do in order to get a package working. Please note this is basically the same as
7606: what was explained in the previous sections, only with some debugging aids.
7607:
1.4 rillig 7608: * Be sure to set PKG_DEVELOPER=yes in mk.conf.
1.1 dsieger 7609:
7610: * Install pkgtools/url2pkg, create a directory for a new package, change into
7611: it, then run url2pkg:
7612:
7613: % mkdir /usr/pkgsrc/category/examplepkg
7614: % cd /usr/pkgsrc/category/examplepkg
7615: % url2pkg http://www.example.com/path/to/distfile.tar.gz
7616:
7617: * Edit the Makefile as requested.
7618:
7619: * Fill in the DESCR file
7620:
7621: * Run make configure
7622:
7623: * Add any dependencies glimpsed from documentation and the configure step to
7624: the package's Makefile.
7625:
7626: * Make the package compile, doing multiple rounds of
7627:
7628: % make
7629: % pkgvi ${WRKSRC}/some/file/that/does/not/compile
7630: % mkpatches
7631: % patchdiff
7632: % mv ${WRKDIR}/.newpatches/* patches
7633: % make mps
7634: % make clean
7635:
7636: Doing this step as non-root user will ensure that no files are modified
7637: that shouldn't be, especially during the build phase. mkpatches, patchdiff
7638: and pkgvi are from the pkgtools/pkgdiff package.
7639:
1.6 rillig 7640: * Look at the Makefile, fix if necessary; see Section 11.1, "Makefile".
1.1 dsieger 7641:
7642: * Generate a PLIST:
7643:
7644: # make install
7645: # make print-PLIST >PLIST
7646: # make deinstall
7647: # make install
7648: # make deinstall
7649:
7650: You usually need to be root to do this. Look if there are any files left:
7651:
7652: # make print-PLIST
7653:
7654: If this reveals any files that are missing in PLIST, add them.
7655:
7656: * Now that the PLIST is OK, install the package again and make a binary
7657: package:
7658:
7659: # make reinstall
7660: # make package
7661:
7662: * Delete the installed package:
7663:
7664: # pkg_delete examplepkg
7665:
7666: * Repeat the above make print-PLIST command, which shouldn't find anything
7667: now:
7668:
7669: # make print-PLIST
7670:
7671: * Reinstall the binary package:
7672:
7673: # pkg_add .../examplepkg.tgz
7674:
7675: * Play with it. Make sure everything works.
7676:
7677: * Run pkglint from pkgtools/pkglint, and fix the problems it reports:
7678:
7679: # pkglint
7680:
1.6 rillig 7681: * Submit (or commit, if you have cvs access); see Chapter 21, Submitting and
1.1 dsieger 7682: Committing.
7683:
1.6 rillig 7684: Chapter 21. Submitting and Committing
1.1 dsieger 7685:
7686: Table of Contents
7687:
1.6 rillig 7688: 21.1. Submitting binary packages
7689: 21.2. Submitting source packages (for non-NetBSD-developers)
7690: 21.3. General notes when adding, updating, or removing packages
1.34 wiz 7691: 21.4. Committing: Adding a package to CVS
1.6 rillig 7692: 21.5. Updating a package to a newer version
1.21 snj 7693: 21.6. Renaming a package in pkgsrc
7694: 21.7. Moving a package in pkgsrc
1.1 dsieger 7695:
1.6 rillig 7696: 21.1. Submitting binary packages
1.1 dsieger 7697:
7698: Our policy is that we accept binaries only from pkgsrc developers to guarantee
7699: that the packages don't contain any trojan horses etc. This is not to annoy
7700: anyone but rather to protect our users! You're still free to put up your
7701: home-made binary packages and tell the world where to get them. NetBSD
1.66 asau 7702: developers doing bulk builds and wanting to upload them please see Chapter 7,
7703: Creating binary packages for everything in pkgsrc (bulk builds).
1.1 dsieger 7704:
1.6 rillig 7705: 21.2. Submitting source packages (for non-NetBSD-developers)
1.1 dsieger 7706:
7707: First, check that your package is complete, compiles and runs well; see
1.6 rillig 7708: Chapter 20, Debugging and the rest of this document. Next, generate an
1.1 dsieger 7709: uuencoded gzipped tar(1) archive that contains all files that make up the
7710: package. Finally, send this package to the pkgsrc bug tracking system, either
7711: with the send-pr(1) command, or if you don't have that, go to the web page
1.4 rillig 7712: http://www.NetBSD.org/support/send-pr.html, which contains some instructions
1.22 snj 7713: and a link to a form where you can submit packages. The sysutils/gtk-send-pr
7714: package is also available as a substitute for either of the above two tools.
1.1 dsieger 7715:
7716: In the form of the problem report, the category should be "pkg", the synopsis
7717: should include the package name and version number, and the description field
7718: should contain a short description of your package (contents of the COMMENT
1.25 wiz 7719: variable or DESCR file are OK). The uuencoded package data should go into the "
7720: fix" field.
1.1 dsieger 7721:
7722: If you want to submit several packages, please send a separate PR for each one,
7723: it's easier for us to track things that way.
7724:
7725: Alternatively, you can also import new packages into pkgsrc-wip ("pkgsrc
7726: work-in-progress"); see the homepage at http://pkgsrc-wip.sourceforge.net/ for
7727: details.
7728:
1.6 rillig 7729: 21.3. General notes when adding, updating, or removing packages
1.1 dsieger 7730:
7731: Please note all package additions, updates, moves, and removals in pkgsrc/doc/
7732: CHANGES-YYYY. It's very important to keep this file up to date and conforming
7733: to the existing format, because it will be used by scripts to automatically
7734: update pages on www.NetBSD.org and other sites. Additionally, check the pkgsrc/
7735: doc/TODO file and remove the entry for the package you updated or removed, in
7736: case it was mentioned there.
7737:
7738: When the PKGREVISION of a package is bumped, the change should appear in pkgsrc
7739: /doc/CHANGES-YYYY if it is security related or otherwise relevant. Mass bumps
7740: that result from a dependency being updated should not be mentioned. In all
7741: other cases it's the developer's decision.
7742:
7743: There is a make target that helps in creating proper CHANGES-YYYY entries: make
7744: changes-entry. It uses the optional CTYPE and NETBSD_LOGIN_NAME variables. The
7745: general usage is to first make sure that your CHANGES-YYYY file is up-to-date
7746: (to avoid having to resolve conflicts later-on) and then to cd to the package
7747: directory. For package updates, make changes-entry is enough. For new packages,
7748: or package moves or removals, set the CTYPE variable on the command line to
1.4 rillig 7749: "Added", "Moved", or "Removed". You can set NETBSD_LOGIN_NAME in mk.conf if
1.23 jakllsch 7750: your local login name is not the same as your NetBSD login name. The target
7751: also automatically removes possibly existing entries for the package in the
7752: TODO file. Don't forget to commit the changes, e.g. by using make
1.66 asau 7753: commit-changes-entry! If you are not using a checkout directly from
1.23 jakllsch 7754: cvs.NetBSD.org, but e.g. a local copy of the repository, you can set
7755: USE_NETBSD_REPO=yes. This makes the cvs commands use the main repository.
1.1 dsieger 7756:
1.34 wiz 7757: 21.4. Committing: Adding a package to CVS
1.1 dsieger 7758:
7759: This section is only of interest for pkgsrc developers with write access to the
1.34 wiz 7760: pkgsrc repository.
7761:
7762: When the package is finished, "cvs add" the files. Start by adding the
7763: directory and then files in the directory. Don't forget to add the new package
7764: to the category's Makefile. Make sure you don't forget any files; you can check
7765: by running "cvs status". An example:
7766:
7767: $ cd .../pkgsrc/category
7768: $ cvs add pkgname
7769: $ cd pkgname
7770: $ cvs add DESCR Makefile PLIST distinfo buildlink3.mk patches
7771: $ cvs add patches/p*
7772: $ cvs status | less
1.35 wiz 7773: $ cvs commit
1.34 wiz 7774: $ cd ..
7775: $ vi Makefile # add SUBDIRS+=pkgname line
1.35 wiz 7776: $ cvs commit Makefile
1.66 asau 7777: $ cd pkgname
1.73 jnemeth 7778: $ make CTYPE=Added commit-changes-entry
1.1 dsieger 7779:
7780: The commit message of the initial import should include part of the DESCR file,
7781: so people reading the mailing lists know what the package is/does.
7782:
1.34 wiz 7783: Also mention the new package in pkgsrc/doc/CHANGES-20xx.
7784:
7785: Previously, "cvs import" was suggested, but it was much easier to get wrong
7786: than "cvs add".
1.1 dsieger 7787:
1.6 rillig 7788: 21.5. Updating a package to a newer version
1.1 dsieger 7789:
7790: Please always put a concise, appropriate and relevant summary of the changes
7791: between old and new versions into the commit log when updating a package. There
7792: are various reasons for this:
7793:
7794: * A URL is volatile, and can change over time. It may go away completely or
7795: its information may be overwritten by newer information.
7796:
7797: * Having the change information between old and new versions in our CVS
7798: repository is very useful for people who use either cvs or anoncvs.
7799:
7800: * Having the change information between old and new versions in our CVS
7801: repository is very useful for people who read the pkgsrc-changes mailing
7802: list, so that they can make tactical decisions about when to upgrade the
7803: package.
7804:
7805: Please also recognize that, just because a new version of a package has been
7806: released, it should not automatically be upgraded in the CVS repository. We
7807: prefer to be conservative in the packages that are included in pkgsrc -
7808: development or beta packages are not really the best thing for most places in
7809: which pkgsrc is used. Please use your judgement about what should go into
7810: pkgsrc, and bear in mind that stability is to be preferred above new and
7811: possibly untested features.
7812:
1.21 snj 7813: 21.6. Renaming a package in pkgsrc
7814:
7815: Renaming packages is not recommended.
7816:
7817: When renaming packages, be sure to fix any references to old name in other
7818: Makefiles, options, buildlink files, etc.
7819:
7820: Also When renaming a package, please define SUPERSEDES to the package name and
7821: dewey version pattern(s) of the previous package name. This may be repeated for
7822: multiple renames. The new package would be an exact replacement.
7823:
7824: Note that "successor" in the CHANGES-YYYY file doesn't necessarily mean that it
7825: supersedes, as that successor may not be an exact replacement but is a
7826: suggestion for the replaced functionality.
7827:
7828: 21.7. Moving a package in pkgsrc
7829:
7830: It is preferred that packages are not renamed or moved, but if needed please
7831: follow these steps.
1.1 dsieger 7832:
7833: 1. Make a copy of the directory somewhere else.
7834:
7835: 2. Remove all CVS dirs.
7836:
7837: Alternatively to the first two steps you can also do:
7838:
7839: % cvs -d user@cvs.NetBSD.org:/cvsroot export -D today pkgsrc/category/package
7840:
7841: and use that for further work.
7842:
1.25 wiz 7843: 3. Fix CATEGORIES and any DEPENDS paths that just did "../package" instead of
1.1 dsieger 7844: "../../category/package".
7845:
1.21 snj 7846: 4. In the modified package's Makefile, consider setting PREV_PKGPATH to the
7847: previous category/package pathname. The PREV_PKGPATH can be used by tools
7848: for doing an update using pkgsrc building; for example, it can search the
7849: pkg_summary(5) database for PREV_PKGPATH (if no SUPERSEDES) and then use
7850: the corresponding new PKGPATH for that moved package. Note that it may have
7851: multiple matches, so the tool should also check on the PKGBASE too. The
7852: PREV_PKGPATH probably has no value unless SUPERSEDES is not set, i.e.
7853: PKGBASE stays the same.
7854:
7855: 5. cvs import the modified package in the new place.
1.1 dsieger 7856:
1.21 snj 7857: 6. Check if any package depends on it:
1.1 dsieger 7858:
7859: % cd /usr/pkgsrc
7860: % grep /package */*/Makefile* */*/buildlink*
7861:
1.21 snj 7862: 7. Fix paths in packages from step 5 to point to new location.
1.1 dsieger 7863:
1.21 snj 7864: 8. cvs rm (-f) the package at the old location.
1.1 dsieger 7865:
1.21 snj 7866: 9. Remove from oldcategory/Makefile.
1.1 dsieger 7867:
1.21 snj 7868: 10. Add to newcategory/Makefile.
1.1 dsieger 7869:
1.21 snj 7870: 11. Commit the changed and removed files:
1.1 dsieger 7871:
7872: % cvs commit oldcategory/package oldcategory/Makefile newcategory/Makefile
7873:
7874: (and any packages from step 5, of course).
7875:
1.6 rillig 7876: Chapter 22. Frequently Asked Questions
1.1 dsieger 7877:
7878: This section contains the answers to questions that may arise when you are
7879: writing a package. If you don't find your question answered here, first have a
7880: look in the other chapters, and if you still don't have the answer, ask on the
7881: pkgsrc-users mailing list.
7882:
1.6 rillig 7883: 22.1. What is the difference between MAKEFLAGS, .MAKEFLAGS and MAKE_FLAGS?
7884: 22.2. What is the difference between MAKE, GMAKE and MAKE_PROGRAM?
7885: 22.3. What is the difference between CC, PKG_CC and PKGSRC_COMPILER?
7886: 22.4. What is the difference between BUILDLINK_LDFLAGS, BUILDLINK_LDADD and
1.1 dsieger 7887: BUILDLINK_LIBS?
1.6 rillig 7888: 22.5. Why does make show-var VARNAME=BUILDLINK_PREFIX.foo say it's empty?
7889: 22.6. What does ${MASTER_SITE_SOURCEFORGE:=package/} mean? I don't understand
1.1 dsieger 7890: the := inside it.
1.6 rillig 7891: 22.7. Which mailing lists are there for package developers?
7892: 22.8. Where is the pkgsrc documentation?
7893: 22.9. I have a little time to kill. What shall I do?
1.1 dsieger 7894:
1.6 rillig 7895: 22.1. What is the difference between MAKEFLAGS, .MAKEFLAGS and MAKE_FLAGS?
1.1 dsieger 7896:
7897: MAKEFLAGS are the flags passed to the pkgsrc-internal invocations of make
7898: (1), while MAKE_FLAGS are the flags that are passed to the MAKE_PROGRAM
7899: when building the package. [FIXME: What is .MAKEFLAGS for?]
7900:
1.6 rillig 7901: 22.2. What is the difference between MAKE, GMAKE and MAKE_PROGRAM?
1.1 dsieger 7902:
7903: MAKE is the path to the make(1) program that is used in the pkgsrc
7904: infrastructure. GMAKE is the path to GNU Make, but you need to say
7905: USE_TOOLS+=gmake to use that. MAKE_PROGRAM is the path to the Make
7906: program that is used for building the package.
7907:
1.6 rillig 7908: 22.3. What is the difference between CC, PKG_CC and PKGSRC_COMPILER?
1.1 dsieger 7909:
7910: CC is the path to the real C compiler, which can be configured by the
7911: pkgsrc user. PKG_CC is the path to the compiler wrapper. PKGSRC_COMPILER
7912: is not a path to a compiler, but the type of compiler that should be
7913: used. See mk/compiler.mk for more information about the latter variable.
7914:
1.6 rillig 7915: 22.4. What is the difference between BUILDLINK_LDFLAGS, BUILDLINK_LDADD and
1.1 dsieger 7916: BUILDLINK_LIBS?
7917:
7918: [FIXME]
7919:
1.6 rillig 7920: 22.5. Why does make show-var VARNAME=BUILDLINK_PREFIX.foo say it's empty?
1.1 dsieger 7921:
1.25 wiz 7922: For optimization reasons, some variables are only available in the "
7923: wrapper" phase and later. To "simulate" the wrapper phase, append
1.1 dsieger 7924: PKG_PHASE=wrapper to the above command.
7925:
1.6 rillig 7926: 22.6. What does ${MASTER_SITE_SOURCEFORGE:=package/} mean? I don't understand
1.1 dsieger 7927: the := inside it.
7928:
7929: The := is not really an assignment operator, like you might expect at
7930: first sight. Instead, it is a degenerate form of ${LIST:old_string=
7931: new_string}, which is documented in the make(1) man page and which you
7932: may have seen as in ${SRCS:.c=.o}. In the case of MASTER_SITE_*,
7933: old_string is the empty string and new_string is package/. That's where
7934: the : and the = fall together.
7935:
1.6 rillig 7936: 22.7. Which mailing lists are there for package developers?
1.1 dsieger 7937:
7938: tech-pkg
7939:
7940: This is a list for technical discussions related to pkgsrc
7941: development, e.g. soliciting feedback for changes to pkgsrc
7942: infrastructure, proposed new features, questions related to porting
7943: pkgsrc to a new platform, advice for maintaining a package, patches
7944: that affect many packages, help requests moved from pkgsrc-users when
7945: an infrastructure bug is found, etc.
7946:
7947: pkgsrc-bugs
7948:
7949: All bug reports in category "pkg" sent with send-pr(1) appear here.
7950: Please do not report your bugs here directly; use one of the other
7951: mailing lists.
7952:
1.6 rillig 7953: 22.8. Where is the pkgsrc documentation?
1.1 dsieger 7954:
7955: There are many places where you can find documentation about pkgsrc:
7956:
7957: * The pkgsrc guide (this document) is a collection of chapters that
7958: explain large parts of pkgsrc, but some chapters tend to be outdated.
7959: Which ones they are is hard to say.
7960:
7961: * On the mailing list archives (see http://mail-index.NetBSD.org/), you
7962: can find discussions about certain features, announcements of new
7963: parts of the pkgsrc infrastructure and sometimes even announcements
7964: that a certain feature has been marked as obsolete. The benefit here
7965: is that each message has a date appended to it.
7966:
7967: * Many of the files in the mk/ directory start with a comment that
7968: describes the purpose of the file and how it can be used by the
7969: pkgsrc user and package authors. An easy way to find this
7970: documentation is to run bmake help.
7971:
7972: * The CVS log messages are a rich source of information, but they tend
7973: to be highly abbreviated, especially for actions that occur often.
7974: Some contain a detailed description of what has changed, but they are
7975: geared towards the other pkgsrc developers, not towards an average
7976: pkgsrc user. They also only document changes, so if you don't know
7977: what has been before, these messages may not be worth too much to
7978: you.
7979:
7980: * Some parts of pkgsrc are only "implicitly documented", that is the
7981: documentation exists only in the mind of the developer who wrote the
7982: code. To get this information, use the cvs annotate command to see
7983: who has written it and ask on the tech-pkg mailing list, so that
7984: others can find your questions later (see above). To be sure that the
7985: developer in charge reads the mail, you may CC him or her.
7986:
1.6 rillig 7987: 22.9. I have a little time to kill. What shall I do?
1.1 dsieger 7988:
7989: This is not really an FAQ yet, but here's the answer anyway.
7990:
7991: * Run pkg_chk -N (from the pkgtools/pkg_chk package). It will tell you
7992: about newer versions of installed packages that are available, but
7993: not yet updated in pkgsrc.
7994:
7995: * Browse pkgsrc/doc/TODO ? it contains a list of suggested new packages
7996: and a list of cleanups and enhancements for pkgsrc that would be nice
7997: to have.
7998:
1.71 wiz 7999: * Review packages for which review was requested on the tech-pkg
8000: mailing list.
1.1 dsieger 8001:
1.6 rillig 8002: Chapter 23. GNOME packaging and porting
1.1 dsieger 8003:
8004: Table of Contents
8005:
1.6 rillig 8006: 23.1. Meta packages
8007: 23.2. Packaging a GNOME application
8008: 23.3. Updating GNOME to a newer version
8009: 23.4. Patching guidelines
1.1 dsieger 8010:
8011: Quoting GNOME's web site:
8012:
8013: The GNOME project provides two things: The GNOME desktop environment, an
8014: intuitive and attractive desktop for users, and the GNOME development
8015: platform, an extensive framework for building applications that integrate
8016: into the rest of the desktop.
8017:
8018: pkgsrc provides a seamless way to automatically build and install a complete
8019: GNOME environment under many different platforms. We can say with confidence
8020: that pkgsrc is one of the most advanced build and packaging systems for GNOME
8021: due to its included technologies buildlink3, the wrappers and tools framework
8022: and automatic configuration file management. Lots of efforts are put into
8023: achieving a completely clean deinstallation of installed software components.
8024:
8025: Given that pkgsrc is NetBSD's official packaging system, the above also means
8026: that great efforts are put into making GNOME work under this operating system.
8027: Recently, DragonFly BSD also adopted pkgsrc as its preferred packaging system,
8028: contributing lots of portability fixes to make GNOME build and install under
8029: it.
8030:
8031: This chapter is aimed at pkgsrc developers and other people interested in
8032: helping our GNOME porting and packaging efforts. It provides instructions on
8033: how to manage the existing packages and some important information regarding
8034: their internals.
8035:
8036: We need your help!
8037:
8038: Should you have some spare cycles to devote to NetBSD, pkgsrc and GNOME and are
8039: willing to learn new exciting stuff, please jump straight to the pending work
8040: list! There is still a long way to go to get a fully-functional GNOME desktop
8041: under NetBSD and we need your help to achieve it!
8042:
1.6 rillig 8043: 23.1. Meta packages
1.1 dsieger 8044:
8045: pkgsrc includes three GNOME-related meta packages:
8046:
8047: * meta-pkgs/gnome-base: Provides the core GNOME desktop environment. It only
8048: includes the necessary bits to get it to boot correctly, although it may
8049: lack important functionality for daily operation. The idea behind this
8050: package is to let end users build their own configurations on top of this
8051: one, first installing this meta package to achieve a functional setup and
8052: then adding individual applications.
8053:
8054: * meta-pkgs/gnome: Provides a complete installation of the GNOME platform and
8055: desktop as defined by the GNOME project; this is based on the components
8056: distributed in the platform/x.y/x.y.z/sources and desktop/x.y/x.y.z/sources
8057: directories of the official FTP server. Developer-only tools found in those
8058: directories are not installed unless required by some other component to
8059: work properly. Similarly, packages from the bindings set (bindings/x.y/
8060: x.y.z/sources) are not pulled in unless required as a dependency for an
8061: end-user component. This package "extends" meta-pkgs/gnome-base.
8062:
8063: * meta-pkgs/gnome-devel: Installs all the tools required to build a GNOME
8064: component when fetched from the CVS repository. These are required to let
8065: the autogen.sh scripts work appropriately.
8066:
8067: In all these packages, the DEPENDS lines are sorted in a way that eases
8068: updates: a package may depend on other packages listed before it but not on any
1.25 wiz 8069: listed after it. It is very important to keep this order to ease updates so...
1.1 dsieger 8070: do not change it to alphabetical sorting!
8071:
1.6 rillig 8072: 23.2. Packaging a GNOME application
1.1 dsieger 8073:
8074: Almost all GNOME applications are written in C and use a common set of tools as
8075: their build system. Things get different with the new bindings to other
8076: languages (such as Python), but the following will give you a general idea on
8077: the minimum required tools:
8078:
8079: * Almost all GNOME applications use the GNU Autotools as their build system.
8080: As a general rule you will need to tell this to your package:
8081:
8082: GNU_CONFIGURE=yes
8083: USE_LIBTOOL=yes
8084: USE_TOOLS+=gmake
8085:
8086: * If the package uses pkg-config to detect dependencies, add this tool to the
8087: list of required utilities:
8088:
8089: USE_TOOLS+=pkg-config
8090:
8091: Also use pkgtools/verifypc at the end of the build process to ensure that
8092: you did not miss to specify any dependency in your package and that the
8093: version requirements are all correct.
8094:
8095: * If the package uses intltool, be sure to add intltool to the USE_TOOLS to
8096: handle dependencies and to force the package to use the latest available
8097: version.
8098:
8099: * If the package uses gtk-doc (a documentation generation utility), do not
8100: add a dependency on it. The tool is rather big and the distfile should come
8101: with pregenerated documentation anyway; if it does not, it is a bug that
8102: you ought to report. For such packages you should disable gtk-doc (unless
8103: it is the default):
8104:
8105: CONFIGURE_ARGS+=--disable-gtk-doc
8106:
8107: The default location of installed HTML files (share/gtk-doc/<package-name>)
8108: is correct and should not be changed unless the package insists on
8109: installing them somewhere else. Otherwise programs as devhelp will not be
8110: able to open them. You can do that with an entry similar to:
8111:
8112: CONFIGURE_ARGS+=--with-html-dir=${PREFIX}/share/gtk-doc/...
8113:
8114: GNOME uses multiple shared directories and files under the installation prefix
8115: to maintain databases. In this context, shared means that those exact same
8116: directories and files are used among several different packages, leading to
8117: conflicts in the PLIST. pkgsrc currently includes functionality to handle the
8118: most common cases, so you have to forget about using @unexec ${RMDIR} lines in
8119: your file lists and omitting shared files from them. If you find yourself doing
8120: those, your package is most likely incorrect.
8121:
8122: The following table lists the common situations that result in using shared
8123: directories or files. For each of them, the appropriate solution is given.
1.25 wiz 8124: After applying the solution be sure to regenerate the package's file list with
1.1 dsieger 8125: make print-PLIST and ensure it is correct.
8126:
1.6 rillig 8127: Table 23.1. PLIST handling for GNOME packages
1.1 dsieger 8128:
8129: +-----------------------------------------------------------------------------+
8130: | If the package... | Then... |
8131: |-------------------------------------------+---------------------------------|
1.6 rillig 8132: | |See Section 19.6.10, "Packages |
1.18 mishka 8133: |Installs OMF files under share/omf. |installing scrollkeeper/rarian |
8134: | |data files". |
1.1 dsieger 8135: |-------------------------------------------+---------------------------------|
1.6 rillig 8136: |Installs icons under the share/icons/ |See Section 19.6.19, "Packages |
1.1 dsieger 8137: |hicolor hierarchy or updates share/icons/ |installing hicolor theme icons". |
8138: |hicolor/icon-theme.cache. | |
8139: |-------------------------------------------+---------------------------------|
1.6 rillig 8140: | |See Section 19.6.14, "Packages |
1.1 dsieger 8141: |Installs files under share/mime/packages. |installing extensions to the MIME|
8142: | |database". |
8143: |-------------------------------------------+---------------------------------|
1.6 rillig 8144: |Installs .desktop files under share/ |See Section 19.6.20, "Packages |
1.1 dsieger 8145: |applications and these include MIME |installing desktop files". |
8146: |information. | |
8147: +-----------------------------------------------------------------------------+
8148:
8149:
1.6 rillig 8150: 23.3. Updating GNOME to a newer version
1.1 dsieger 8151:
8152: When seeing GNOME as a whole, there are two kinds of updates:
8153:
8154: Major update
8155:
8156: Given that there is still a very long way for GNOME 3 (if it ever appears),
8157: we consider a major update one that goes from a 2.X version to a 2.Y one,
8158: where Y is even and greater than X. These are hard to achieve because they
8159: introduce lots of changes in the components' code and almost all GNOME
8160: distfiles are updated to newer versions. Some of them can even break API
8161: and ABI compatibility with the previous major version series. As a result,
8162: the update needs to be done all at once to minimize breakage.
8163:
8164: A major update typically consists of around 80 package updates and the
8165: addition of some new ones.
8166:
8167: Minor update
8168:
8169: We consider a minor update one that goes from a 2.A.X version to a 2.A.Y
8170: one where Y is greater than X. These are easy to achieve because they do
8171: not update all GNOME components, can be done in an incremental way and do
8172: not break API nor ABI compatibility.
8173:
8174: A minor update typically consists of around 50 package updates, although
8175: the numbers here may vary a lot.
8176:
8177: In order to update the GNOME components in pkgsrc to a new stable release
8178: (either major or minor), the following steps should be followed:
8179:
8180: 1. Get a list of all the tarballs that form the new release by using the
1.19 snj 8181: following commands. These will leave the full list of the components'
1.1 dsieger 8182: distfiles into the list.txt file:
8183:
8184: % echo ls "*.tar.bz2" | \
8185: ftp -V ftp://ftp.gnome.org/pub/gnome/platform/x.y/x.y.z/sources/ | \
8186: awk '{ print $9 }' >list.txt
8187: % echo ls "*.tar.bz2" | \
8188: ftp -V ftp://ftp.gnome.org/pub/gnome/desktop/x.y/x.y.z/sources/ | \
8189: awk '{ print $9 }' >>list.txt
8190:
8191: 2. Open each meta package's Makefile and bump their version to the release you
8192: are updating them to. The three meta packages should be always consistent
8193: with versioning. Obviously remove any PKGREVISIONs that might be in them.
8194:
8195: 3. For each meta package, update all its DEPENDS lines to match the latest
8196: versions as shown by the above commands. Do not list any newer version
8197: (even if found in the FTP) because the meta packages are supposed to list
8198: the exact versions that form a specific GNOME release. Exceptions are
8199: permitted here if a newer version solves a serious issue in the overall
8200: desktop experience; these typically come in the form of a revision bump in
8201: pkgsrc, not in newer versions from the developers.
8202:
8203: Packages not listed in the list.txt file should be updated to the latest
8204: version available (if found in pkgsrc). This is the case, for example, of
8205: the dependencies on the GNU Autotools in the meta-pkgs/gnome-devel meta
8206: package.
8207:
8208: 4. Generate a patch from the modified meta packages and extract the list of
8209: "new" lines. This will provide you an outline on what packages need to be
8210: updated in pkgsrc and in what order:
8211:
8212: % cvs diff -u gnome-devel gnome-base gnome | grep '^+D' >todo.txt
8213:
8214: 5. For major desktop updates it is recommended to zap all your installed
8215: packages and start over from scratch at this point.
8216:
8217: 6. Now comes the longest step by far: iterate over the contents of todo.txt
8218: and update the packages listed in it in order. For major desktop updates
8219: none of these should be committed until the entire set is completed because
8220: there are chances of breaking not-yet-updated packages.
8221:
8222: 7. Once the packages are up to date and working, commit them to the tree one
8223: by one with appropriate log messages. At the end, commit the three meta
8224: package updates and all the corresponding changes to the doc/CHANGES-<YEAR>
8225: and pkgsrc/doc/TODO files.
8226:
1.6 rillig 8227: 23.4. Patching guidelines
1.1 dsieger 8228:
8229: GNOME is a very big component in pkgsrc which approaches 100 packages. Please,
8230: it is very important that you always, always, always feed back any portability
8231: fixes you do to a GNOME package to the mainstream developers (see
1.6 rillig 8232: Section 11.3.5, "Feedback to the author"). This is the only way to get their
1.1 dsieger 8233: attention on portability issues and to ensure that future versions can be built
8234: out-of-the box on NetBSD. The less custom patches in pkgsrc, the easier further
8235: updates are. Those developers in charge of issuing major GNOME updates will be
8236: grateful if you do that.
8237:
8238: The most common places to report bugs are the GNOME's Bugzilla and the
8239: freedesktop.org's Bugzilla. Not all components use these to track bugs, but
8240: most of them do. Do not be short on your reports: always provide detailed
8241: explanations of the current failure, how it can be improved to achieve maximum
8242: portability and, if at all possible, provide a patch against CVS head. The more
8243: verbose you are, the higher chances of your patch being accepted.
8244:
8245: Also, please avoid using preprocessor magic to fix portability issues. While
8246: the FreeBSD GNOME people are doing a great job in porting GNOME to their
8247: operating system, the official GNOME sources are now plagued by conditionals
8248: that check for __FreeBSD__ and similar macros. This hurts portability. Please
1.6 rillig 8249: see our patching guidelines (Section 11.3.4, "Patching guidelines") for more
1.1 dsieger 8250: details.
8251:
8252: Part III. The pkgsrc infrastructure internals
8253:
8254: This part of the guide deals with everything from the infrastructure that is
8255: behind the interfaces described in the developer's guide. A casual package
8256: maintainer should not need anything from this part.
8257:
8258: Table of Contents
8259:
1.6 rillig 8260: 24. Design of the pkgsrc infrastructure
1.1 dsieger 8261:
1.6 rillig 8262: 24.1. The meaning of variable definitions
8263: 24.2. Avoiding problems before they arise
8264: 24.3. Variable evaluation
1.1 dsieger 8265:
1.6 rillig 8266: 24.3.1. At load time
8267: 24.3.2. At runtime
1.1 dsieger 8268:
1.6 rillig 8269: 24.4. How can variables be specified?
8270: 24.5. Designing interfaces for Makefile fragments
1.1 dsieger 8271:
1.6 rillig 8272: 24.5.1. Procedures with parameters
8273: 24.5.2. Actions taken on behalf of parameters
1.1 dsieger 8274:
1.6 rillig 8275: 24.6. The order in which files are loaded
1.1 dsieger 8276:
1.6 rillig 8277: 24.6.1. The order in bsd.prefs.mk
8278: 24.6.2. The order in bsd.pkg.mk
1.1 dsieger 8279:
1.6 rillig 8280: 25. Regression tests
1.1 dsieger 8281:
1.6 rillig 8282: 25.1. The regression tests framework
8283: 25.2. Running the regression tests
8284: 25.3. Adding a new regression test
1.1 dsieger 8285:
1.6 rillig 8286: 25.3.1. Overridable functions
8287: 25.3.2. Helper functions
1.1 dsieger 8288:
1.6 rillig 8289: 26. Porting pkgsrc
1.1 dsieger 8290:
1.6 rillig 8291: 26.1. Porting pkgsrc to a new operating system
8292: 26.2. Adding support for a new compiler
1.1 dsieger 8293:
1.6 rillig 8294: Chapter 24. Design of the pkgsrc infrastructure
1.1 dsieger 8295:
8296: Table of Contents
8297:
1.6 rillig 8298: 24.1. The meaning of variable definitions
8299: 24.2. Avoiding problems before they arise
8300: 24.3. Variable evaluation
1.1 dsieger 8301:
1.6 rillig 8302: 24.3.1. At load time
8303: 24.3.2. At runtime
1.1 dsieger 8304:
1.6 rillig 8305: 24.4. How can variables be specified?
8306: 24.5. Designing interfaces for Makefile fragments
1.1 dsieger 8307:
1.6 rillig 8308: 24.5.1. Procedures with parameters
8309: 24.5.2. Actions taken on behalf of parameters
1.1 dsieger 8310:
1.6 rillig 8311: 24.6. The order in which files are loaded
1.1 dsieger 8312:
1.6 rillig 8313: 24.6.1. The order in bsd.prefs.mk
8314: 24.6.2. The order in bsd.pkg.mk
1.1 dsieger 8315:
8316: The pkgsrc infrastructure consists of many small Makefile fragments. Each such
8317: fragment needs a properly specified interface. This chapter explains how such
8318: an interface looks like.
8319:
1.6 rillig 8320: 24.1. The meaning of variable definitions
1.1 dsieger 8321:
8322: Whenever a variable is defined in the pkgsrc infrastructure, the location and
8323: the way of definition provide much information about the intended use of that
8324: variable. Additionally, more documentation may be found in a header comment or
8325: in this pkgsrc guide.
8326:
8327: A special file is mk/defaults/mk.conf, which lists all variables that are
8328: intended to be user-defined. They are either defined using the ?= operator or
8329: they are left undefined because defining them to anything would effectively
8330: mean "yes". All these variables may be overridden by the pkgsrc user in the
8331: MAKECONF file.
8332:
8333: Outside this file, the following conventions apply: Variables that are defined
8334: using the ?= operator may be overridden by a package.
8335:
8336: Variables that are defined using the = operator may be used read-only at
8337: run-time.
8338:
8339: Variables whose name starts with an underscore must not be accessed outside the
8340: pkgsrc infrastructure at all. They may change without further notice.
8341:
8342: Note
8343:
8344: These conventions are currently not applied consistently to the complete pkgsrc
8345: infrastructure.
8346:
1.6 rillig 8347: 24.2. Avoiding problems before they arise
1.1 dsieger 8348:
8349: All variables that contain lists of things should default to being empty. Two
8350: examples that do not follow this rule are USE_LANGUAGES and DISTFILES. These
8351: variables cannot simply be modified using the += operator in package Makefiles
8352: (or other files included by them), since there is no guarantee whether the
8353: variable is already set or not, and what its value is. In the case of
8354: DISTFILES, the packages "know" the default value and just define it as in the
8355: following example.
8356:
8357: DISTFILES= ${DISTNAME}${EXTRACT_SUFX} additional-files.tar.gz
8358:
8359: Because of the selection of this default value, the same value appears in many
8360: package Makefiles. Similarly for USE_LANGUAGES, but in this case the default
8361: value ("c") is so short that it doesn't stand out. Nevertheless it is mentioned
8362: in many files.
8363:
1.6 rillig 8364: 24.3. Variable evaluation
1.1 dsieger 8365:
1.6 rillig 8366: 24.3.1. At load time
1.1 dsieger 8367:
8368: Variable evaluation takes place either at load time or at runtime, depending on
8369: the context in which they occur. The contexts where variables are evaluated at
8370: load time are:
8371:
8372: * The right hand side of the := and != operators,
8373:
8374: * Make directives like .if or .for,
8375:
8376: * Dependency lines.
8377:
8378: A special exception are references to the iteration variables of .for loops,
8379: which are expanded inline, no matter in which context they appear.
8380:
8381: As the values of variables may change during load time, care must be taken not
8382: to evaluate them by accident. Typical examples for variables that should not be
8383: evaluated at load time are DEPENDS and CONFIGURE_ARGS. To make the effect more
8384: clear, here is an example:
8385:
8386: CONFIGURE_ARGS= # none
8387: CFLAGS= -O
8388: CONFIGURE_ARGS+= CFLAGS=${CFLAGS:Q}
8389:
8390: CONFIGURE_ARGS:= ${CONFIGURE_ARGS}
8391:
8392: CFLAGS+= -Wall
8393:
8394:
8395: This code shows how the use of the := operator can quickly lead to unexpected
8396: results. The first paragraph is fairly common code. The second paragraph
8397: evaluates the CONFIGURE_ARGS variable, which results in CFLAGS=-O. In the third
8398: paragraph, the -Wall is appended to the CFLAGS, but this addition will not
8399: appear in CONFIGURE_ARGS. In actual code, the three paragraphs from above
8400: typically occur in completely unrelated files.
8401:
1.6 rillig 8402: 24.3.2. At runtime
1.1 dsieger 8403:
8404: After all the files have been loaded, the values of the variables cannot be
8405: changed anymore. Variables that are used in the shell commands are expanded at
8406: this point.
8407:
1.6 rillig 8408: 24.4. How can variables be specified?
1.1 dsieger 8409:
8410: There are many ways in which the definition and use of a variable can be
8411: restricted in order to detect bugs and violations of the (mostly unwritten)
8412: policies. See the pkglint developer's documentation for further details.
8413:
1.6 rillig 8414: 24.5. Designing interfaces for Makefile fragments
1.1 dsieger 8415:
8416: Most of the .mk files fall into one of the following classes. Cases where a
8417: file falls into more than one class should be avoided as it often leads to
8418: subtle bugs.
8419:
1.6 rillig 8420: 24.5.1. Procedures with parameters
1.1 dsieger 8421:
8422: In a traditional imperative programming language some of the .mk files could be
1.23 jakllsch 8423: described as procedures. They take some input parameters and?after
8424: inclusion?provide a result in output parameters. Since all variables in
8425: Makefiles have global scope care must be taken not to use parameter names that
8426: have already another meaning. For example, PKGNAME is a bad choice for a
8427: parameter name.
1.1 dsieger 8428:
8429: Procedures are completely evaluated at preprocessing time. That is, when
8430: calling a procedure all input parameters must be completely resolvable. For
8431: example, CONFIGURE_ARGS should never be an input parameter since it is very
8432: likely that further text will be added after calling the procedure, which would
8433: effectively apply the procedure to only a part of the variable. Also,
8434: references to other variables wit will be modified after calling the procedure.
8435:
8436: A procedure can declare its output parameters either as suitable for use in
8437: preprocessing directives or as only available at runtime. The latter
8438: alternative is for variables that contain references to other runtime
8439: variables.
8440:
8441: Procedures shall be written such that it is possible to call the procedure more
8442: than once. That is, the file must not contain multiple-inclusion guards.
8443:
8444: Examples for procedures are mk/bsd.options.mk and mk/buildlink3/bsd.builtin.mk.
8445: To express that the parameters are evaluated at load time, they should be
8446: assigned using the := operator, which should be used only for this purpose.
8447:
1.6 rillig 8448: 24.5.2. Actions taken on behalf of parameters
1.1 dsieger 8449:
8450: Action files take some input parameters and may define runtime variables. They
8451: shall not define loadtime variables. There are action files that are included
8452: implicitly by the pkgsrc infrastructure, while other must be included
8453: explicitly.
8454:
8455: An example for action files is mk/subst.mk.
8456:
1.6 rillig 8457: 24.6. The order in which files are loaded
1.1 dsieger 8458:
8459: Package Makefiles usually consist of a set of variable definitions, and include
8460: the file ../../mk/bsd.pkg.mk in the very last line. Before that, they may also
8461: include various other *.mk files if they need to query the availability of
8462: certain features like the type of compiler or the X11 implementation. Due to
8463: the heavy use of preprocessor directives like .if and .for, the order in which
8464: the files are loaded matters.
8465:
8466: This section describes at which point the various files are loaded and gives
8467: reasons for that order.
8468:
1.6 rillig 8469: 24.6.1. The order in bsd.prefs.mk
1.1 dsieger 8470:
8471: The very first action in bsd.prefs.mk is to define some essential variables
8472: like OPSYS, OS_VERSION and MACHINE_ARCH.
8473:
1.4 rillig 8474: Then, the user settings are loaded from the file specified in MAKECONF, which
8475: is usually mk.conf. After that, those variables that have not been overridden
8476: by the user are loaded from mk/defaults/mk.conf.
1.1 dsieger 8477:
8478: After the user settings, the system settings and platform settings are loaded,
8479: which may override the user settings.
8480:
8481: Then, the tool definitions are loaded. The tool wrappers are not yet in effect.
8482: This only happens when building a package, so the proper variables must be used
8483: instead of the direct tool names.
8484:
8485: As the last steps, some essential variables from the wrapper and the package
8486: system flavor are loaded, as well as the variables that have been cached in
8487: earlier phases of a package build.
8488:
1.6 rillig 8489: 24.6.2. The order in bsd.pkg.mk
1.1 dsieger 8490:
8491: First, bsd.prefs.mk is loaded.
8492:
8493: Then, the various *-vars.mk files are loaded, which fill default values for
8494: those variables that have not been defined by the package. These variables may
8495: later be used even in unrelated files.
8496:
8497: Then, the file bsd.pkg.error.mk provides the target error-check that is added
8498: as a special dependency to all other targets that use DELAYED_ERROR_MSG or
8499: DELAYED_WARNING_MSG.
8500:
8501: Then, the package-specific hacks from hacks.mk are included.
8502:
8503: Then, various other files follow. Most of them don't have any dependencies on
8504: what they need to have included before or after them, though some do.
8505:
8506: The code to check PKG_FAIL_REASON and PKG_SKIP_REASON is then executed, which
8507: restricts the use of these variables to all the files that have been included
8508: before. Appearances in later files will be silently ignored.
8509:
8510: Then, the files for the main targets are included, in the order of later
8511: execution, though the actual order should not matter.
8512:
8513: At last, some more files are included that don't set any interesting variables
8514: but rather just define make targets to be executed.
8515:
1.6 rillig 8516: Chapter 25. Regression tests
1.1 dsieger 8517:
8518: Table of Contents
8519:
1.6 rillig 8520: 25.1. The regression tests framework
8521: 25.2. Running the regression tests
8522: 25.3. Adding a new regression test
1.1 dsieger 8523:
1.6 rillig 8524: 25.3.1. Overridable functions
8525: 25.3.2. Helper functions
1.1 dsieger 8526:
8527: The pkgsrc infrastructure consists of a large codebase, and there are many
8528: corners where every little bit of a file is well thought out, making pkgsrc
8529: likely to fail as soon as anything is changed near those parts. To prevent most
8530: changes from breaking anything, a suite of regression tests should go along
8531: with every important part of the pkgsrc infrastructure. This chapter describes
8532: how regression tests work in pkgsrc and how you can add new tests.
8533:
1.6 rillig 8534: 25.1. The regression tests framework
1.1 dsieger 8535:
1.6 rillig 8536: 25.2. Running the regression tests
1.1 dsieger 8537:
1.25 wiz 8538: You first need to install the pkgtools/pkg_regress package, which provides the
1.1 dsieger 8539: pkg_regress command. Then you can simply run that command, which will run all
8540: tests in the regress category.
8541:
1.6 rillig 8542: 25.3. Adding a new regression test
1.1 dsieger 8543:
8544: Every directory in the regress category that contains a file called spec is
8545: considered a regression test. This file is a shell program that is included by
8546: the pkg_regress command. The following functions can be overridden to suit your
8547: needs.
8548:
1.6 rillig 8549: 25.3.1. Overridable functions
1.1 dsieger 8550:
8551: These functions do not take any parameters. They are all called in "set -e"
8552: mode, so you should be careful to check the exitcodes of any commands you run
8553: in the test.
8554:
8555: do_setup()
8556:
8557: This function prepares the environment for the test. By default it does
8558: nothing.
8559:
8560: do_test()
8561:
8562: This function runs the actual test. By default, it calls TEST_MAKE with the
8563: arguments MAKEARGS_TEST and writes its output including error messages into
8564: the file TEST_OUTFILE.
8565:
8566: check_result()
8567:
8568: This function is run after the test and is typically used to compare the
8569: actual output from the one that is expected. It can make use of the various
8570: helper functions from the next section.
8571:
8572: do_cleanup()
8573:
8574: This function cleans everything up after the test has been run. By default
8575: it does nothing.
8576:
1.6 rillig 8577: 25.3.2. Helper functions
1.1 dsieger 8578:
8579: exit_status(expected)
8580:
8581: This function compares the exitcode of the do_test() function with its
8582: first parameter. If they differ, the test will fail.
8583:
8584: output_require(regex...)
8585:
8586: This function checks for each of its parameters if the output from do_test
8587: () matches the extended regular expression. If it does not, the test will
8588: fail.
8589:
8590: output_prohibit(regex...)
8591:
8592: This function checks for each of its parameters if the output from do_test
8593: () does not match the extended regular expression. If any of the regular
8594: expressions matches, the test will fail.
8595:
1.6 rillig 8596: Chapter 26. Porting pkgsrc
1.1 dsieger 8597:
8598: Table of Contents
8599:
1.6 rillig 8600: 26.1. Porting pkgsrc to a new operating system
8601: 26.2. Adding support for a new compiler
1.1 dsieger 8602:
8603: The pkgsrc system has already been ported to many operating systems, hardware
8604: architectures and compilers. This chapter explains the necessary steps to make
8605: pkgsrc even more portable.
8606:
1.6 rillig 8607: 26.1. Porting pkgsrc to a new operating system
1.1 dsieger 8608:
8609: To port pkgsrc to a new operating system (called MyOS in this example), you
8610: need to touch the following files:
8611:
8612: pkgtools/bootstrap-mk-files/files/mods/MyOS.sys.mk
8613:
8614: This file contains some basic definitions, for example the name of the C
8615: compiler.
8616:
8617: mk/bsd.prefs.mk
8618:
8619: Insert code that defines the variables OPSYS, OS_VERSION, LOWER_OS_VERSION,
8620: LOWER_VENDOR, MACHINE_ARCH, OBJECT_FMT, APPEND_ELF, and the other variables
8621: that appear in this file.
8622:
8623: mk/platform/MyOS.mk
8624:
8625: This file contains the platform-specific definitions that are used by
8626: pkgsrc. Start by copying one of the other files and edit it to your needs.
8627:
8628: mk/tools/tools.MyOS.mk
8629:
8630: This file defines the paths to all the tools that are needed by one or the
8631: other package in pkgsrc, as well as by pkgsrc itself. Find out where these
8632: tools are on your platform and add them.
8633:
8634: Now, you should be able to build some basic packages, like lang/perl5, shells/
8635: bash.
8636:
1.6 rillig 8637: 26.2. Adding support for a new compiler
1.1 dsieger 8638:
8639: TODO
8640:
8641: Appendix A. A simple example package: bison
8642:
8643: Table of Contents
8644:
8645: A.1. files
8646:
8647: A.1.1. Makefile
8648: A.1.2. DESCR
8649: A.1.3. PLIST
8650: A.1.4. Checking a package with pkglint
8651:
8652: A.2. Steps for building, installing, packaging
8653:
8654: We checked to find a piece of software that wasn't in the packages collection,
1.25 wiz 8655: and picked GNU bison. Quite why someone would want to have bison when Berkeley
1.1 dsieger 8656: yacc is already present in the tree is beyond us, but it's useful for the
8657: purposes of this exercise.
8658:
8659: A.1. files
8660:
8661: A.1.1. Makefile
8662:
1.2 rillig 8663: # $NetBSD$
1.1 dsieger 8664: #
8665:
8666: DISTNAME= bison-1.25
8667: CATEGORIES= devel
8668: MASTER_SITES= ${MASTER_SITE_GNU}
8669:
1.30 dholland 8670: MAINTAINER= pkgsrc-users@NetBSD.org
1.1 dsieger 8671: HOMEPAGE= http://www.gnu.org/software/bison/bison.html
8672: COMMENT= GNU yacc clone
8673:
8674: GNU_CONFIGURE= yes
1.47 wiz 8675: INFO_FILES= yes
1.1 dsieger 8676:
8677: .include "../../mk/bsd.pkg.mk"
8678:
8679: A.1.2. DESCR
8680:
8681: GNU version of yacc. Can make re-entrant parsers, and numerous other
8682: improvements. Why you would want this when Berkeley yacc(1) is part
8683: of the NetBSD source tree is beyond me.
8684:
8685: A.1.3. PLIST
8686:
1.2 rillig 8687: @comment $NetBSD$
1.1 dsieger 8688: bin/bison
8689: man/man1/bison.1.gz
8690: share/bison.simple
8691: share/bison.hairy
8692:
8693: A.1.4. Checking a package with pkglint
8694:
8695: The NetBSD package system comes with pkgtools/pkglint which helps to check the
8696: contents of these files. After installation it is quite easy to use, just
8697: change to the directory of the package you wish to examine and execute pkglint:
8698:
8699: $ pkglint
8700: looks fine.
8701:
8702: Depending on the supplied command line arguments (see pkglint(1)), more checks
8703: will be performed. Use e.g. pkglint -Call -Wall for a very thorough check.
8704:
8705: A.2. Steps for building, installing, packaging
8706:
8707: Create the directory where the package lives, plus any auxiliary directories:
8708:
8709: # cd /usr/pkgsrc/lang
8710: # mkdir bison
8711: # cd bison
8712: # mkdir patches
8713:
1.6 rillig 8714: Create Makefile, DESCR and PLIST (see Chapter 11, Package components - files,
1.1 dsieger 8715: directories and contents) then continue with fetching the distfile:
8716:
8717: # make fetch
8718: >> bison-1.25.tar.gz doesn't seem to exist on this system.
8719: >> Attempting to fetch from ftp://prep.ai.mit.edu/pub/gnu//.
8720: Requesting ftp://prep.ai.mit.edu/pub/gnu//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/)
8721: ftp: Error retrieving file: 500 Internal error
8722:
8723: >> Attempting to fetch from ftp://wuarchive.wustl.edu/systems/gnu//.
8724: Requesting ftp://wuarchive.wustl.edu/systems/gnu//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/)
8725: ftp: Error retrieving file: 500 Internal error
8726:
8727: >> Attempting to fetch from ftp://ftp.freebsd.org/pub/FreeBSD/distfiles//.
8728: Requesting ftp://ftp.freebsd.org/pub/FreeBSD/distfiles//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/)
8729: Successfully retrieved file.
8730:
8731: Generate the checksum of the distfile into distinfo:
8732:
8733: # make makedistinfo
8734:
8735: Now compile:
8736:
8737: # make
8738: >> Checksum OK for bison-1.25.tar.gz.
8739: ===> Extracting for bison-1.25
8740: ===> Patching for bison-1.25
8741: ===> Ignoring empty patch directory
8742: ===> Configuring for bison-1.25
8743: creating cache ./config.cache
8744: checking for gcc... cc
8745: checking whether we are using GNU C... yes
8746: checking for a BSD compatible install... /usr/bin/install -c -o bin -g bin
8747: checking how to run the C preprocessor... cc -E
8748: checking for minix/config.h... no
8749: checking for POSIXized ISC... no
8750: checking whether cross-compiling... no
8751: checking for ANSI C header files... yes
8752: checking for string.h... yes
8753: checking for stdlib.h... yes
8754: checking for memory.h... yes
8755: checking for working const... yes
8756: checking for working alloca.h... no
8757: checking for alloca... yes
8758: checking for strerror... yes
8759: updating cache ./config.cache
8760: creating ./config.status
8761: creating Makefile
8762: ===> Building for bison-1.25
8763: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g LR0.c
8764: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g allocate.c
8765: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g closure.c
8766: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g conflicts.c
8767: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g derives.c
8768: cc -c -DXPFILE=\"/usr/pkg/share/bison.simple\" -DXPFILE1=\"/usr/pkg/share/bison.hairy\" -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -g ./files.c
8769: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g getargs.c
8770: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g gram.c
8771: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g lalr.c
8772: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g lex.c
8773: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g main.c
8774: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g nullable.c
8775: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g output.c
8776: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g print.c
8777: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g reader.c
8778: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g reduce.c
8779: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g symtab.c
8780: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g warshall.c
8781: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g version.c
8782: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g getopt.c
8783: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g getopt1.c
8784: cc -g -o bison LR0.o allocate.o closure.o conflicts.o derives.o files.o getargs.o gram.o lalr.o lex.o main.o nullable.o output.o print.o reader.o reduce.o symtab.o warshall.o version.o getopt.o getopt1.o
8785: ./files.c:240: warning: mktemp() possibly used unsafely, consider using mkstemp()
8786: rm -f bison.s1
8787: sed -e "/^#line/ s|bison|/usr/pkg/share/bison|" < ./bison.simple > bison.s1
8788:
8789: Everything seems OK, so install the files:
8790:
8791: # make install
8792: >> Checksum OK for bison-1.25.tar.gz.
8793: ===> Installing for bison-1.25
8794: sh ./mkinstalldirs /usr/pkg/bin /usr/pkg/share /usr/pkg/info /usr/pkg/man/man1
8795: rm -f /usr/pkg/bin/bison
8796: cd /usr/pkg/share; rm -f bison.simple bison.hairy
8797: rm -f /usr/pkg/man/man1/bison.1 /usr/pkg/info/bison.info*
8798: install -c -o bin -g bin -m 555 bison /usr/pkg/bin/bison
8799: /usr/bin/install -c -o bin -g bin -m 644 bison.s1 /usr/pkg/share/bison.simple
8800: /usr/bin/install -c -o bin -g bin -m 644 ./bison.hairy /usr/pkg/share/bison.hairy
8801: cd .; for f in bison.info*; do /usr/bin/install -c -o bin -g bin -m 644 $f /usr/pkg/info/$f; done
8802: /usr/bin/install -c -o bin -g bin -m 644 ./bison.1 /usr/pkg/man/man1/bison.1
8803: ===> Registering installation for bison-1.25
8804:
8805: You can now use bison, and also - if you decide so - remove it with pkg_delete
8806: bison. Should you decide that you want a binary package, do this now:
8807:
8808: # make package
8809: >> Checksum OK for bison-1.25.tar.gz.
8810: ===> Building package for bison-1.25
8811: Creating package bison-1.25.tgz
8812: Registering depends:.
8813: Creating gzip'd tar ball in '/u/pkgsrc/lang/bison/bison-1.25.tgz'
8814:
8815: Now that you don't need the source and object files any more, clean up:
8816:
8817: # make clean
8818: ===> Cleaning for bison-1.25
8819:
8820: Appendix B. Build logs
8821:
8822: Table of Contents
8823:
8824: B.1. Building figlet
8825: B.2. Packaging figlet
8826:
8827: B.1. Building figlet
8828:
8829: # make
8830: ===> Checking for vulnerabilities in figlet-2.2.1nb2
8831: => figlet221.tar.gz doesn't seem to exist on this system.
8832: => Attempting to fetch figlet221.tar.gz from ftp://ftp.figlet.org/pub/figlet/program/unix/.
8833: => [172219 bytes]
8834: Connected to ftp.plig.net.
8835: 220 ftp.plig.org NcFTPd Server (licensed copy) ready.
8836: 331 Guest login ok, send your complete e-mail address as password.
8837: 230-You are user #5 of 500 simultaneous users allowed.
8838: 230-
8839: 230- ___ _ _ _
8840: 230- | _| |_ ___ ___| |_|___ ___ ___ ___
8841: 230- | _| _| . |_| . | | | . |_| . | _| . |
8842: 230- |_| |_| | _|_| _|_|_|_ |_|___|_| |_ |
8843: 230- |_| |_| |___| |___|
8844: 230-
8845: 230-** Welcome to ftp.plig.org **
8846: 230-
8847: 230-Please note that all transfers from this FTP site are logged. If you
8848: 230-do not like this, please disconnect now.
8849: 230-
1.19 snj 8850: 230-This archive is available via
1.1 dsieger 8851: 230-
8852: 230-HTTP: http://ftp.plig.org/
8853: 230-FTP: ftp://ftp.plig.org/ (max 500 connections)
8854: 230-RSYNC: rsync://ftp.plig.org/ (max 30 connections)
8855: 230-
8856: 230-Please email comments, bug reports and requests for packages to be
8857: 230-mirrored to ftp-admin@plig.org.
8858: 230-
8859: 230-
8860: 230 Logged in anonymously.
8861: Remote system type is UNIX.
8862: Using binary mode to transfer files.
8863: 200 Type okay.
8864: 250 "/pub" is new cwd.
8865: 250-"/pub/figlet" is new cwd.
8866: 250-
8867: 250-Welcome to the figlet archive at ftp.figlet.org
8868: 250-
8869: 250- ftp://ftp.figlet.org/pub/figlet/
8870: 250-
8871: 250-The official FIGlet web page is:
8872: 250- http://www.figlet.org/
8873: 250-
8874: 250-If you have questions, please mailto:info@figlet.org. If you want to
8875: 250-contribute a font or something else, you can email us.
8876: 250
8877: 250 "/pub/figlet/program" is new cwd.
8878: 250 "/pub/figlet/program/unix" is new cwd.
8879: local: figlet221.tar.gz remote: figlet221.tar.gz
8880: 502 Unimplemented command.
8881: 227 Entering Passive Mode (195,40,6,41,246,104)
8882: 150 Data connection accepted from 84.128.86.72:65131; transfer starting for figlet221.tar.gz (172219 bytes).
8883: 38% |************** | 65800 64.16 KB/s 00:01 ETA
8884: 226 Transfer completed.
8885: 172219 bytes received in 00:02 (75.99 KB/s)
8886: 221 Goodbye.
8887: => Checksum OK for figlet221.tar.gz.
8888: ===> Extracting for figlet-2.2.1nb2
8889: ===> Required installed package ccache-[0-9]*: ccache-2.3nb1 found
8890: ===> Patching for figlet-2.2.1nb2
8891: ===> Applying pkgsrc patches for figlet-2.2.1nb2
8892: ===> Overriding tools for figlet-2.2.1nb2
8893: ===> Creating toolchain wrappers for figlet-2.2.1nb2
8894: ===> Configuring for figlet-2.2.1nb2
8895: ===> Building for figlet-2.2.1nb2
8896: gcc -O2 -DDEFAULTFONTDIR=\"/usr/pkg/share/figlet\" -DDEFAULTFONTFILE=\"standard.flf\" figlet.c zipio.c crc.c inflate.c -o figlet
8897: chmod a+x figlet
8898: gcc -O2 -o chkfont chkfont.c
8899: => Unwrapping files-to-be-installed.
8900: #
8901: # make install
8902: ===> Checking for vulnerabilities in figlet-2.2.1nb2
8903: ===> Installing for figlet-2.2.1nb2
8904: install -d -o root -g wheel -m 755 /usr/pkg/bin
8905: install -d -o root -g wheel -m 755 /usr/pkg/man/man6
8906: mkdir -p /usr/pkg/share/figlet
8907: cp figlet /usr/pkg/bin
8908: cp chkfont /usr/pkg/bin
8909: chmod 555 figlist showfigfonts
8910: cp figlist /usr/pkg/bin
8911: cp showfigfonts /usr/pkg/bin
8912: cp fonts/*.flf /usr/pkg/share/figlet
8913: cp fonts/*.flc /usr/pkg/share/figlet
8914: cp figlet.6 /usr/pkg/man/man6
8915: ===> Registering installation for figlet-2.2.1nb2
8916: #
8917:
8918: B.2. Packaging figlet
8919:
8920: # make package
8921: ===> Checking for vulnerabilities in figlet-2.2.1nb2
8922: ===> Packaging figlet-2.2.1nb2
8923: ===> Building binary package for figlet-2.2.1nb2
8924: Creating package /home/cvs/pkgsrc/packages/i386/All/figlet-2.2.1nb2.tgz
8925: Using SrcDir value of /usr/pkg
8926: Registering depends:.
8927: #
8928:
8929: Appendix C. Directory layout of the pkgsrc FTP server
8930:
8931: Table of Contents
8932:
1.23 jakllsch 8933: C.1. distfiles: The distributed source files
8934: C.2. misc: Miscellaneous things
8935: C.3. packages: Binary packages
8936: C.4. reports: Bulk build reports
8937: C.5. current, pkgsrc-20xxQy: source packages
1.1 dsieger 8938:
8939: As in other big projects, the directory layout of pkgsrc is quite complex for
8940: newbies. This chapter explains where you find things on the FTP server. The
8941: base directory on ftp.NetBSD.org is /pub/pkgsrc/. On other servers it may be
8942: different, but inside this directory, everything should look the same, no
8943: matter on which server you are. This directory contains some subdirectories,
8944: which are explained below.
8945:
1.23 jakllsch 8946: C.1. distfiles: The distributed source files
1.1 dsieger 8947:
8948: The directory distfiles contains lots of archive files from all pkgsrc
8949: packages, which are mirrored here. The subdirectories are called after their
8950: package names and are used when the distributed files have names that don't
8951: explicitly contain a version number or are otherwise too generic (for example
8952: release.tar.gz).
8953:
1.23 jakllsch 8954: C.2. misc: Miscellaneous things
1.1 dsieger 8955:
8956: This directory contains things that individual pkgsrc developers find worth
8957: publishing.
8958:
1.23 jakllsch 8959: C.3. packages: Binary packages
1.1 dsieger 8960:
1.3 rillig 8961: This directory contains binary packages for the various platforms that are
8962: supported by pkgsrc. Each subdirectory is of the form OPSYS/ARCH/OSVERSION_TAG.
8963: The meaning of these variables is:
8964:
8965: * OPSYS is the name of the operating system for which the packages have been
1.9 rillig 8966: built. The name is taken from the output of the uname command, so it may
8967: differ from the one you are used to hear.
1.3 rillig 8968:
1.8 rillig 8969: * ARCH is the hardware architecture of the platform for which the packages
1.10 hubertf 8970: have been built. It also includes the ABI (Application Binary Interface)
8971: for platforms that have several of them.
1.3 rillig 8972:
1.8 rillig 8973: * OSVERSION is the version of the operating system. For version numbers that
8974: change often (for example NetBSD-current), the often-changing part should
8975: be replaced with an x, for example 4.99.x.
1.3 rillig 8976:
1.23 jakllsch 8977: * TAG is either 20xxQy for a stable branch, or head for packages built from
1.8 rillig 8978: the HEAD branch. The latter should only be used when the packages are
8979: updated on a regular basis. Otherwise the date from checking out pkgsrc
8980: should be appended, for example head_20071015.
1.3 rillig 8981:
8982: The rationale for exactly this scheme is that the pkgsrc users looking for
8983: binary packages can quickly click through the directories on the server and
8984: find the best binary packages for their machines. Since they usually know the
8985: operating system and the hardware architecture, OPSYS and ARCH are placed
8986: first. After these choices, they can select the best combination of OSVERSION
8987: and TAG together, since it is usually the case that packages stay compatible
8988: between different version of the operating system.
8989:
8990: In each of these directories, there is a whole binary packages collection for a
8991: specific platform. It has a directory called All which contains all binary
8992: packages. Besides that, there are various category directories that contain
8993: symbolic links to the real binary packages.
1.1 dsieger 8994:
1.23 jakllsch 8995: C.4. reports: Bulk build reports
1.8 rillig 8996:
8997: Here are the reports from bulk builds, for those who want to fix packages that
8998: didn't build on some of the platforms. The structure of subdirectories should
1.23 jakllsch 8999: look like the one in Section C.3, "packages: Binary packages".
1.8 rillig 9000:
1.23 jakllsch 9001: C.5. current, pkgsrc-20xxQy: source packages
1.1 dsieger 9002:
9003: These directories contain the "real" pkgsrc, that is the files that define how
9004: to create binary packages from source archives.
9005:
9006: The directory pkgsrc contains a snapshot of the CVS repository, which is
9007: updated regularly. The file pkgsrc.tar.gz contains the same as the directory,
9008: ready to be downloaded as a whole.
9009:
9010: In the directories for the quarterly branches, there is an additional file
1.23 jakllsch 9011: called pkgsrc-20xxQy.tar.gz, which contains the state of pkgsrc when it was
1.1 dsieger 9012: branched.
9013:
9014: Appendix D. Editing guidelines for the pkgsrc guide
9015:
9016: Table of Contents
9017:
9018: D.1. Make targets
9019: D.2. Procedure
9020:
9021: This section contains information on editing the pkgsrc guide itself.
9022:
9023: D.1. Make targets
9024:
9025: The pkgsrc guide's source code is stored in pkgsrc/doc/guide/files, and several
9026: files are created from it:
9027:
9028: * pkgsrc/doc/pkgsrc.txt
9029:
9030: * pkgsrc/doc/pkgsrc.html
9031:
1.2 rillig 9032: * http://www.NetBSD.org/docs/pkgsrc/
1.1 dsieger 9033:
1.2 rillig 9034: * http://www.NetBSD.org/docs/pkgsrc/pkgsrc.pdf: The PDF version of the pkgsrc
9035: guide.
1.1 dsieger 9036:
1.2 rillig 9037: * http://www.NetBSD.org/docs/pkgsrc/pkgsrc.ps: PostScript version of the
9038: pkgsrc guide.
1.1 dsieger 9039:
9040: D.2. Procedure
9041:
9042: The procedure to edit the pkgsrc guide is:
9043:
9044: 1. Make sure you have the packages needed to regenerate the pkgsrc guide (and
1.46 obache 9045: other XML-based NetBSD documentation) installed. These are automatically
9046: installed when you install the meta-pkgs/pkgsrc-guide-tools package.
1.1 dsieger 9047:
9048: 2. Run cd doc/guide to get to the right directory. All further steps will take
9049: place here.
9050:
9051: 3. Edit the XML file(s) in files/.
9052:
9053: 4. Run bmake to check the pkgsrc guide for valid XML and to build the final
9054: output files. If you get any errors at this stage, you can just edit the
9055: files, as there are only symbolic links in the working directory, pointing
9056: to the files in files/.
9057:
9058: 5. (cd files && cvs commit)
9059:
9060: 6. Run bmake clean && bmake to regenerate the output files with the proper RCS
9061: Ids.
9062:
9063: 7. Run bmake regen to install and commit the files in both pkgsrc/doc and
9064: htdocs.
9065:
9066: Note
9067:
9068: If you have added, removed or renamed some chapters, you need to
9069: synchronize them using cvs add or cvs delete in the htdocs directory.
9070:
CVSweb <webmaster@jp.NetBSD.org>