Annotation of htdocs/docs/pkgsrc/pkgsrc.txt, revision 1.5

1.1       dsieger     1: The pkgsrc guide
                      2: 
                      3: Documentation on the NetBSD packages system
                      4: 
                      5: Alistair Crooks
                      6: 
                      7: <agc@NetBSD.org>
                      8: 
                      9: Hubert Feyrer
                     10: 
                     11: <hubertf@NetBSD.org>
                     12: 
                     13: The pkgsrc Developers
                     14: 
1.4       rillig     15: Copyright   1994-2007 The NetBSD Foundation, Inc
1.1       dsieger    16: 
1.4       rillig     17: $NetBSD: pkgsrc.xml,v 1.25 2007/08/15 06:32:38 rillig Exp $
1.1       dsieger    18: 
                     19: Abstract
                     20: 
                     21: pkgsrc is a centralized package management system for Unix-like operating
                     22: systems. This guide provides information for users and developers of pkgsrc. It
                     23: covers installation of binary and source packages, creation of binary and
                     24: source packages and a high-level overview about the infrastructure.
                     25: 
                     26: -------------------------------------------------------------------------------
                     27: 
                     28: Table of Contents
                     29: 
                     30: 1. What is pkgsrc?
                     31: 
                     32:     1.1. Introduction
                     33: 
                     34:         1.1.1. Why pkgsrc?
                     35:         1.1.2. Supported platforms
                     36: 
                     37:     1.2. Overview
                     38:     1.3. Terminology
                     39: 
                     40:         1.3.1. Roles involved in pkgsrc
                     41: 
                     42:     1.4. Typography
                     43: 
                     44: I. The pkgsrc user's guide
                     45: 
                     46:     2. Where to get pkgsrc and how to keep it up-to-date
                     47: 
                     48:         2.1. Getting pkgsrc for the first time
                     49: 
                     50:             2.1.1. As tar file
                     51:             2.1.2. Via SUP
                     52:             2.1.3. Via anonymous CVS
                     53: 
                     54:         2.2. Keeping pkgsrc up-to-date
                     55: 
                     56:             2.2.1. Via tar files
                     57:             2.2.2. Via CVS
                     58: 
                     59:     3. Using pkgsrc on systems other than NetBSD
                     60: 
                     61:         3.1. Binary distribution
                     62:         3.2. Bootstrapping pkgsrc
                     63:         3.3. Platform-specific notes
                     64: 
                     65:             3.3.1. Darwin (Mac OS X)
                     66:             3.3.2. FreeBSD
                     67:             3.3.3. Interix
                     68:             3.3.4. IRIX
                     69:             3.3.5. Linux
                     70:             3.3.6. OpenBSD
                     71:             3.3.7. Solaris
                     72: 
                     73:     4. Using pkgsrc
                     74: 
                     75:         4.1. Using binary packages
                     76: 
                     77:             4.1.1. Finding binary packages
                     78:             4.1.2. Installing binary packages
                     79:             4.1.3. Deinstalling packages
                     80:             4.1.4. Getting information about installed packages
                     81:             4.1.5. Checking for security vulnerabilities in installed packages
                     82:             4.1.6. Finding if newer versions of your installed packages are in
                     83:                 pkgsrc
                     84:             4.1.7. Other administrative functions
                     85:             4.1.8. A word of warning
                     86: 
                     87:         4.2. Building packages from source
                     88: 
                     89:             4.2.1. Requirements
                     90:             4.2.2. Fetching distfiles
                     91:             4.2.3. How to build and install
                     92: 
                     93:     5. Configuring pkgsrc
                     94: 
                     95:         5.1. General configuration
                     96:         5.2. Variables affecting the build process
1.4       rillig     97:         5.3. Variables affecting the installion process
                     98:         5.4. Selecting and configuring the compiler
1.1       dsieger    99: 
1.4       rillig    100:             5.4.1. Selecting the compiler
                    101:             5.4.2. Additional flags to the compiler (CFLAGS)
                    102:             5.4.3. Additional flags to the linker (LDFLAGS)
1.1       dsieger   103: 
1.4       rillig    104:         5.5. Developer/advanced settings
                    105:         5.6. Selecting Build Options
1.1       dsieger   106: 
                    107:     6. Creating binary packages
                    108: 
                    109:         6.1. Building a single binary package
                    110:         6.2. Settings for creation of binary packages
                    111:         6.3. Doing a bulk build of all packages
                    112: 
                    113:             6.3.1. Configuration
                    114:             6.3.2. Other environmental considerations
                    115:             6.3.3. Operation
                    116:             6.3.4. What it does
                    117:             6.3.5. Disk space requirements
                    118:             6.3.6. Setting up a sandbox for chrooted builds
                    119:             6.3.7. Building a partial set of packages
                    120:             6.3.8. Uploading results of a bulk build
                    121: 
                    122:         6.4. Creating a multiple CD-ROM packages collection
                    123: 
                    124:             6.4.1. Example of cdpack
                    125: 
                    126:     7. Directory layout of the installed files
                    127: 
                    128:         7.1. File system layout in ${LOCALBASE}
                    129:         7.2. File system layout in ${VARBASE}
                    130: 
                    131:     8. Frequently Asked Questions
                    132: 
                    133:         8.1. Are there any mailing lists for pkg-related discussion?
                    134:         8.2. Where's the pkgviews documentation?
                    135:         8.3. Utilities for package management (pkgtools)
                    136:         8.4. How to use pkgsrc as non-root
                    137:         8.5. How to resume transfers when fetching distfiles?
1.4       rillig    138:         8.6. How can I install/use modular X.org from pkgsrc?
                    139:         8.7. How to fetch files from behind a firewall
                    140:         8.8. How do I tell make fetch to do passive FTP?
                    141:         8.9. How to fetch all distfiles at once
                    142:         8.10. What does "Don't know how to make /usr/share/tmac/tmac.andoc"
1.1       dsieger   143:             mean?
1.4       rillig    144:         8.11. What does "Could not find bsd.own.mk" mean?
                    145:         8.12. Using 'sudo' with pkgsrc
                    146:         8.13. How do I change the location of configuration files?
                    147:         8.14. Automated security checks
                    148:         8.15. Why do some packages ignore my CFLAGS?
                    149:         8.16. A package does not build. What shall I do?
                    150:         8.17. What does "Makefile appears to contain unresolved cvs/rcs/???
1.1       dsieger   151:             merge conflicts" mean?
                    152: 
                    153: II. The pkgsrc developer's guide
                    154: 
                    155:     9. Creating a new pkgsrc package from scratch
                    156: 
                    157:         9.1. Common types of packages
                    158: 
                    159:             9.1.1. Perl modules
                    160:             9.1.2. KDE applications
                    161: 
                    162:         9.2. Examples
                    163: 
                    164:             9.2.1. How the www/nvu package came into pkgsrc
                    165: 
                    166:     10. Package components - files, directories and contents
                    167: 
                    168:         10.1. Makefile
                    169:         10.2. distinfo
                    170:         10.3. patches/*
                    171: 
                    172:             10.3.1. Structure of a single patch file
                    173:             10.3.2. Creating patch files
                    174:             10.3.3. Sources where the patch files come from
                    175:             10.3.4. Patching guidelines
                    176:             10.3.5. Feedback to the author
                    177: 
                    178:         10.4. Other mandatory files
                    179:         10.5. Optional files
                    180: 
                    181:             10.5.1. Files affecting the binary package
                    182:             10.5.2. Files affecting the build process
                    183:             10.5.3. Files affecting nothing at all
                    184: 
                    185:         10.6. work*
                    186:         10.7. files/*
                    187: 
                    188:     11. Programming in Makefiles
                    189: 
                    190:         11.1. Caveats
                    191:         11.2. Makefile variables
                    192: 
                    193:             11.2.1. Naming conventions
                    194: 
                    195:         11.3. Code snippets
                    196: 
                    197:             11.3.1. Adding things to a list
                    198:             11.3.2. Converting an internal list into an external list
                    199:             11.3.3. Passing variables to a shell command
                    200:             11.3.4. Quoting guideline
                    201:             11.3.5. Workaround for a bug in BSD Make
                    202: 
                    203:     12. PLIST issues
                    204: 
                    205:         12.1. RCS ID
                    206:         12.2. Semi-automatic PLIST generation
                    207:         12.3. Tweaking output of make print-PLIST
                    208:         12.4. Variable substitution in PLIST
                    209:         12.5. Man page compression
                    210:         12.6. Changing PLIST source with PLIST_SRC
                    211:         12.7. Platform-specific and differing PLISTs
                    212:         12.8. Sharing directories between packages
                    213: 
                    214:     13. Buildlink methodology
                    215: 
                    216:         13.1. Converting packages to use buildlink3
                    217:         13.2. Writing buildlink3.mk files
                    218: 
                    219:             13.2.1. Anatomy of a buildlink3.mk file
                    220:             13.2.2. Updating BUILDLINK_API_DEPENDS.pkg in buildlink3.mk files
                    221: 
                    222:         13.3. Writing builtin.mk files
                    223: 
                    224:             13.3.1. Anatomy of a builtin.mk file
                    225:             13.3.2. Global preferences for native or pkgsrc software
                    226: 
                    227:     14. The pkginstall framework
                    228: 
                    229:         14.1. Files and directories outside the installation prefix
                    230: 
                    231:             14.1.1. Directory manipulation
                    232:             14.1.2. File manipulation
                    233: 
                    234:         14.2. Configuration files
                    235: 
                    236:             14.2.1. How PKG_SYSCONFDIR is set
                    237:             14.2.2. Telling the software where configuration files are
                    238:             14.2.3. Patching installations
                    239:             14.2.4. Disabling handling of configuration files
                    240: 
                    241:         14.3. System startup scripts
                    242: 
                    243:             14.3.1. Disabling handling of system startup scripts
                    244: 
                    245:         14.4. System users and groups
                    246:         14.5. System shells
                    247: 
                    248:             14.5.1. Disabling shell registration
                    249: 
                    250:         14.6. Fonts
                    251: 
                    252:             14.6.1. Disabling automatic update of the fonts databases
                    253: 
                    254:     15. Options handling
                    255: 
                    256:         15.1. Global default options
                    257:         15.2. Converting packages to use bsd.options.mk
                    258:         15.3. Option Names
                    259: 
                    260:     16. The build process
                    261: 
                    262:         16.1. Introduction
                    263:         16.2. Program location
                    264:         16.3. Directories used during the build process
                    265:         16.4. Running a phase
                    266:         16.5. The fetch phase
                    267: 
                    268:             16.5.1. What to fetch and where to get it from
                    269:             16.5.2. How are the files fetched?
                    270: 
                    271:         16.6. The checksum phase
                    272:         16.7. The extract phase
                    273:         16.8. The patch phase
                    274:         16.9. The tools phase
                    275:         16.10. The wrapper phase
                    276:         16.11. The configure phase
                    277:         16.12. The build phase
                    278:         16.13. The test phase
                    279:         16.14. The install phase
                    280:         16.15. The package phase
                    281:         16.16. Cleaning up
                    282:         16.17. Other helpful targets
                    283: 
                    284:     17. Tools needed for building or running
                    285: 
                    286:         17.1. Tools for pkgsrc builds
                    287:         17.2. Tools needed by packages
                    288:         17.3. Tools provided by platforms
                    289:         17.4. Questions regarding the tools
                    290: 
                    291:     18. Making your package work
                    292: 
                    293:         18.1. General operation
                    294: 
                    295:             18.1.1. Portability of packages
                    296:             18.1.2. How to pull in user-settable variables from mk.conf
                    297:             18.1.3. User interaction
                    298:             18.1.4. Handling licenses
                    299:             18.1.5. Restricted packages
                    300:             18.1.6. Handling dependencies
                    301:             18.1.7. Handling conflicts with other packages
                    302:             18.1.8. Packages that cannot or should not be built
                    303:             18.1.9. Packages which should not be deleted, once installed
                    304:             18.1.10. Handling packages with security problems
                    305:             18.1.11. How to handle incrementing versions when fixing an
                    306:                 existing package
                    307:             18.1.12. Substituting variable text in the package files (the SUBST
                    308:                 framework)
                    309: 
                    310:         18.2. Fixing problems in the fetch phase
                    311: 
                    312:             18.2.1. Packages whose distfiles aren't available for plain
                    313:                 downloading
                    314:             18.2.2. How to handle modified distfiles with the 'old' name
                    315: 
                    316:         18.3. Fixing problems in the configure phase
                    317: 
                    318:             18.3.1. Shared libraries - libtool
                    319:             18.3.2. Using libtool on GNU packages that already support libtool
                    320:             18.3.3. GNU Autoconf/Automake
                    321: 
                    322:         18.4. Programming languages
                    323: 
                    324:             18.4.1. C, C++, and Fortran
                    325:             18.4.2. Java
                    326:             18.4.3. Packages containing perl scripts
                    327:             18.4.4. Other programming languages
                    328: 
                    329:         18.5. Fixing problems in the build phase
                    330: 
                    331:             18.5.1. Compiling C and C++ code conditionally
                    332:             18.5.2. How to handle compiler bugs
                    333:             18.5.3. Undefined reference to "..."
                    334:             18.5.4. Running out of memory
                    335: 
                    336:         18.6. Fixing problems in the install phase
                    337: 
                    338:             18.6.1. Creating needed directories
                    339:             18.6.2. Where to install documentation
                    340:             18.6.3. Installing highscore files
1.4       rillig    341:             18.6.4. Adding DESTDIR support to packages
                    342:             18.6.5. Packages with hardcoded paths to other interpreters
                    343:             18.6.6. Packages installing perl modules
                    344:             18.6.7. Packages installing info files
                    345:             18.6.8. Packages installing man pages
                    346:             18.6.9. Packages installing GConf2 data files
                    347:             18.6.10. Packages installing scrollkeeper data files
                    348:             18.6.11. Packages installing X11 fonts
                    349:             18.6.12. Packages installing GTK2 modules
                    350:             18.6.13. Packages installing SGML or XML data
                    351:             18.6.14. Packages installing extensions to the MIME database
                    352:             18.6.15. Packages using intltool
                    353:             18.6.16. Packages installing startup scripts
                    354:             18.6.17. Packages installing TeX modules
                    355:             18.6.18. Packages supporting running binaries in emulation
                    356:             18.6.19. Packages installing hicolor theme icons
                    357:             18.6.20. Packages installing desktop files
1.1       dsieger   358: 
                    359:         18.7. Marking packages as having problems
                    360: 
                    361:     19. Debugging
                    362:     20. Submitting and Committing
                    363: 
                    364:         20.1. Submitting binary packages
                    365:         20.2. Submitting source packages (for non-NetBSD-developers)
                    366:         20.3. General notes when adding, updating, or removing packages
                    367:         20.4. Committing: Importing a package into CVS
                    368:         20.5. Updating a package to a newer version
                    369:         20.6. Moving a package in pkgsrc
                    370: 
                    371:     21. Frequently Asked Questions
                    372:     22. GNOME packaging and porting
                    373: 
                    374:         22.1. Meta packages
                    375:         22.2. Packaging a GNOME application
                    376:         22.3. Updating GNOME to a newer version
                    377:         22.4. Patching guidelines
                    378: 
                    379: III. The pkgsrc infrastructure internals
                    380: 
                    381:     23. Design of the pkgsrc infrastructure
                    382: 
                    383:         23.1. The meaning of variable definitions
                    384:         23.2. Avoiding problems before they arise
                    385:         23.3. Variable evaluation
                    386: 
                    387:             23.3.1. At load time
                    388:             23.3.2. At runtime
                    389: 
                    390:         23.4. How can variables be specified?
                    391:         23.5. Designing interfaces for Makefile fragments
                    392: 
                    393:             23.5.1. Procedures with parameters
                    394:             23.5.2. Actions taken on behalf of parameters
                    395: 
                    396:         23.6. The order in which files are loaded
                    397: 
                    398:             23.6.1. The order in bsd.prefs.mk
                    399:             23.6.2. The order in bsd.pkg.mk
                    400: 
                    401:     24. Regression tests
                    402: 
                    403:         24.1. The regression tests framework
                    404:         24.2. Running the regression tests
                    405:         24.3. Adding a new regression test
                    406: 
                    407:             24.3.1. Overridable functions
                    408:             24.3.2. Helper functions
                    409: 
                    410:     25. Porting pkgsrc
                    411: 
                    412:         25.1. Porting pkgsrc to a new operating system
                    413:         25.2. Adding support for a new compiler
                    414: 
                    415: A. A simple example package: bison
                    416: 
                    417:     A.1. files
                    418: 
                    419:         A.1.1. Makefile
                    420:         A.1.2. DESCR
                    421:         A.1.3. PLIST
                    422:         A.1.4. Checking a package with pkglint
                    423: 
                    424:     A.2. Steps for building, installing, packaging
                    425: 
                    426: B. Build logs
                    427: 
                    428:     B.1. Building figlet
                    429:     B.2. Packaging figlet
                    430: 
                    431: C. Directory layout of the pkgsrc FTP server
                    432: 
                    433:     C.1. bootstrap-pkgsrc: Bootstrap kits
                    434:     C.2. distfiles: The distributed source files
                    435:     C.3. iso: Currently empty
                    436:     C.4. misc: Miscellaneous things
1.3       rillig    437:     C.5. packages: Binary packages
1.1       dsieger   438:     C.6. current, pkgsrc-200xQy: source packages
                    439: 
                    440: D. Editing guidelines for the pkgsrc guide
                    441: 
                    442:     D.1. Make targets
                    443:     D.2. Procedure
                    444: 
                    445: List of Tables
                    446: 
                    447: 1.1. Platforms supported by pkgsrc
                    448: 3.1. Binary kits and available packages
                    449: 10.1. Patching examples
                    450: 22.1. PLIST handling for GNOME packages
                    451: 
                    452: Chapter 1. What is pkgsrc?
                    453: 
                    454: Table of Contents
                    455: 
                    456: 1.1. Introduction
                    457: 
                    458:     1.1.1. Why pkgsrc?
                    459:     1.1.2. Supported platforms
                    460: 
                    461: 1.2. Overview
                    462: 1.3. Terminology
                    463: 
                    464:     1.3.1. Roles involved in pkgsrc
                    465: 
                    466: 1.4. Typography
                    467: 
                    468: 1.1. Introduction
                    469: 
                    470: There is a lot of software freely available for Unix-based systems, which is
                    471: usually available in form of the source code. Before such software can be used,
                    472: it needs to be configured to the local system, compiled and installed, and this
                    473: is exactly what The NetBSD Packages Collection (pkgsrc) does. pkgsrc also has
                    474: some basic commands to handle binary packages, so that not every user has to
                    475: build the packages for himself, which is a time-costly task.
                    476: 
                    477: pkgsrc currently contains several thousand packages, including:
                    478: 
                    479:   * www/apache - The Apache web server
                    480: 
                    481:   * www/firefox - The Firefox web browser
                    482: 
                    483:   * meta-pkgs/gnome - The GNOME Desktop Environment
                    484: 
                    485:   * meta-pkgs/kde3 - The K Desktop Environment
                    486: 
                    487: ...just to name a few.
                    488: 
                    489: pkgsrc has built-in support for handling varying dependencies, such as pthreads
                    490: and X11, and extended features such as IPv6 support on a range of platforms.
                    491: 
                    492: 1.1.1. Why pkgsrc?
                    493: 
                    494: pkgsrc provides the following key features:
                    495: 
                    496:   * Easy building of software from source as well as the creation and
                    497:     installation of binary packages. The source and latest patches are
                    498:     retrieved from a master or mirror download site, checksum verified, then
                    499:     built on your system. Support for binary-only distributions is available
                    500:     for both native platforms and NetBSD emulated platforms.
                    501: 
                    502:   * All packages are installed in a consistent directory tree, including
                    503:     binaries, libraries, man pages and other documentation.
                    504: 
                    505:   * Package dependencies, including when performing package updates, are
                    506:     handled automatically. The configuration files of various packages are
                    507:     handled automatically during updates, so local changes are preserved.
                    508: 
                    509:   * Like NetBSD, pkgsrc is designed with portability in mind and consists of
                    510:     highly portable code. This allows the greatest speed of development when
                    511:     porting to new a platform. This portability also ensures that pkgsrc is
                    512:     consistent across all platforms.
                    513: 
                    514:   * The installation prefix, acceptable software licenses, international
                    515:     encryption requirements and build-time options for a large number of
                    516:     packages are all set in a simple, central configuration file.
                    517: 
                    518:   * The entire source (not including the distribution files) is freely
                    519:     available under a BSD license, so you may extend and adapt pkgsrc to your
                    520:     needs. Support for local packages and patches is available right out of the
                    521:     box, so you can configure it specifically for your environment.
                    522: 
                    523: The following principles are basic to pkgsrc:
                    524: 
                    525:   * "It should only work if it's right." ? That means, if a package contains
                    526:     bugs, it's better to find them and to complain about them rather than to
                    527:     just install the package and hope that it works. There are numerous checks
                    528:     in pkgsrc that try to find such bugs: Static analysis tools (pkgtools/
                    529:     pkglint), build-time checks (portability of shell scripts), and
                    530:     post-installation checks (installed files, references to shared libraries,
                    531:     script interpreters).
                    532: 
                    533:   * "If it works, it should work everywhere" ? Like NetBSD has been ported to
                    534:     many hardware architectures, pkgsrc has been ported to many operating
                    535:     systems. Care is taken that packages behave the same on all platforms.
                    536: 
                    537: 1.1.2. Supported platforms
                    538: 
                    539: pkgsrc consists of both a source distribution and a binary distribution for
                    540: these operating systems. After retrieving the required source or binaries, you
                    541: can be up and running with pkgsrc in just minutes!
                    542: 
                    543: pkgsrc was derived from FreeBSD's ports system, and initially developed for
                    544: NetBSD only. Since then, pkgsrc has grown a lot, and now supports the following
                    545: platforms:
                    546: 
                    547: Table 1.1. Platforms supported by pkgsrc
                    548: 
                    549: +----------------------------------------------------------------+
                    550: |                  Platform                   |Date Support Added|
                    551: |---------------------------------------------+------------------|
                    552: |NetBSD                                       |     Aug 1997     |
                    553: |---------------------------------------------+------------------|
                    554: |Solaris                                      |     Mar 1999     |
                    555: |---------------------------------------------+------------------|
                    556: |Linux                                        |     Jun 1999     |
                    557: |---------------------------------------------+------------------|
                    558: |Darwin (Mac OS X)                            |     Oct 2001     |
                    559: |---------------------------------------------+------------------|
                    560: |FreeBSD                                      |     Nov 2002     |
                    561: |---------------------------------------------+------------------|
                    562: |OpenBSD                                      |     Nov 2002     |
                    563: |---------------------------------------------+------------------|
                    564: |IRIX                                         |     Dec 2002     |
                    565: |---------------------------------------------+------------------|
                    566: |BSD/OS                                       |     Dec 2003     |
                    567: |---------------------------------------------+------------------|
                    568: |AIX                                          |     Dec 2003     |
                    569: |---------------------------------------------+------------------|
                    570: |Interix (Microsoft Windows Services for Unix)|     Mar 2004     |
                    571: |---------------------------------------------+------------------|
                    572: |DragonFlyBSD                                 |     Oct 2004     |
                    573: |---------------------------------------------+------------------|
                    574: |OSF/1                                        |     Nov 2004     |
                    575: |---------------------------------------------+------------------|
                    576: |HP-UX                                        |     Apr 2007     |
                    577: +----------------------------------------------------------------+
                    578: 
                    579: 
                    580: 1.2. Overview
                    581: 
                    582: This document is divided into three parts. The first, The pkgsrc user's guide,
                    583: describes how one can use one of the packages in the Package Collection, either
                    584: by installing a precompiled binary package, or by building one's own copy using
                    585: the NetBSD package system. The second part, The pkgsrc developer's guide,
                    586: explains how to prepare a package so it can be easily built by other NetBSD
                    587: users without knowing about the package's building details. The third part, The
                    588: pkgsrc infrastructure internals is intended for those who want to understand
                    589: how pkgsrc is implemented.
                    590: 
                    591: This document is available in various formats: HTML, PDF, PS, TXT.
                    592: 
                    593: 1.3. Terminology
                    594: 
                    595: There has been a lot of talk about "ports", "packages", etc. so far. Here is a
                    596: description of all the terminology used within this document.
                    597: 
                    598: Package
                    599: 
                    600:     A set of files and building instructions that describe what's necessary to
                    601:     build a certain piece of software using pkgsrc. Packages are traditionally
                    602:     stored under /usr/pkgsrc.
                    603: 
                    604: The NetBSD package system
                    605: 
                    606:     This is the former name of "pkgsrc". It is part of the NetBSD operating
                    607:     system and can be bootstrapped to run on non-NetBSD operating systems as
                    608:     well. It handles building (compiling), installing, and removing of
                    609:     packages.
                    610: 
                    611: Distfile
                    612: 
                    613:     This term describes the file or files that are provided by the author of
                    614:     the piece of software to distribute his work. All the changes necessary to
                    615:     build on NetBSD are reflected in the corresponding package. Usually the
                    616:     distfile is in the form of a compressed tar-archive, but other types are
                    617:     possible, too. Distfiles are usually stored below /usr/pkgsrc/distfiles.
                    618: 
                    619: Port
                    620: 
                    621:     This is the term used by FreeBSD and OpenBSD people for what we call a
                    622:     package. In NetBSD terminology, "port" refers to a different architecture.
                    623: 
                    624: Precompiled/binary package
                    625: 
                    626:     A set of binaries built with pkgsrc from a distfile and stuffed together in
                    627:     a single .tgz file so it can be installed on machines of the same machine
                    628:     architecture without the need to recompile. Packages are usually generated
                    629:     in /usr/pkgsrc/packages; there is also an archive on ftp.NetBSD.org.
                    630: 
                    631:     Sometimes, this is referred to by the term "package" too, especially in the
                    632:     context of precompiled packages.
                    633: 
                    634: Program
                    635: 
                    636:     The piece of software to be installed which will be constructed from all
                    637:     the files in the distfile by the actions defined in the corresponding
                    638:     package.
                    639: 
                    640: 1.3.1. Roles involved in pkgsrc
                    641: 
                    642: pkgsrc users
                    643: 
                    644:     The pkgsrc users are people who use the packages provided by pkgsrc.
                    645:     Typically they are system administrators. The people using the software
                    646:     that is inside the packages (maybe called "end users") are not covered by
                    647:     the pkgsrc guide.
                    648: 
                    649:     There are two kinds of pkgsrc users: Some only want to install pre-built
                    650:     binary packages. Others build the pkgsrc packages from source, either for
                    651:     installing them directly or for building binary packages themselves. For
                    652:     pkgsrc users Part I, "The pkgsrc user's guide" should provide all necessary
                    653:     documentation.
                    654: 
                    655: package maintainers
                    656: 
                    657:     A package maintainer creates packages as described in Part II, "The pkgsrc
                    658:     developer's guide".
                    659: 
                    660: infrastructure developers
                    661: 
                    662:     These people are involved in all those files that live in the mk/ directory
                    663:     and below. Only these people should need to read through Part III, "The
                    664:     pkgsrc infrastructure internals", though others might be curious, too.
                    665: 
                    666: 1.4. Typography
                    667: 
                    668: When giving examples for commands, shell prompts are used to show if the
                    669: command should/can be issued as root, or if "normal" user privileges are
                    670: sufficient. We use a # for root's shell prompt, and a % for users' shell
                    671: prompt, assuming they use the C-shell or tcsh.
                    672: 
                    673: Part I. The pkgsrc user's guide
                    674: 
                    675: Table of Contents
                    676: 
                    677: 2. Where to get pkgsrc and how to keep it up-to-date
                    678: 
                    679:     2.1. Getting pkgsrc for the first time
                    680: 
                    681:         2.1.1. As tar file
                    682:         2.1.2. Via SUP
                    683:         2.1.3. Via anonymous CVS
                    684: 
                    685:     2.2. Keeping pkgsrc up-to-date
                    686: 
                    687:         2.2.1. Via tar files
                    688:         2.2.2. Via CVS
                    689: 
                    690: 3. Using pkgsrc on systems other than NetBSD
                    691: 
                    692:     3.1. Binary distribution
                    693:     3.2. Bootstrapping pkgsrc
                    694:     3.3. Platform-specific notes
                    695: 
                    696:         3.3.1. Darwin (Mac OS X)
                    697:         3.3.2. FreeBSD
                    698:         3.3.3. Interix
                    699:         3.3.4. IRIX
                    700:         3.3.5. Linux
                    701:         3.3.6. OpenBSD
                    702:         3.3.7. Solaris
                    703: 
                    704: 4. Using pkgsrc
                    705: 
                    706:     4.1. Using binary packages
                    707: 
                    708:         4.1.1. Finding binary packages
                    709:         4.1.2. Installing binary packages
                    710:         4.1.3. Deinstalling packages
                    711:         4.1.4. Getting information about installed packages
                    712:         4.1.5. Checking for security vulnerabilities in installed packages
                    713:         4.1.6. Finding if newer versions of your installed packages are in
                    714:             pkgsrc
                    715:         4.1.7. Other administrative functions
                    716:         4.1.8. A word of warning
                    717: 
                    718:     4.2. Building packages from source
                    719: 
                    720:         4.2.1. Requirements
                    721:         4.2.2. Fetching distfiles
                    722:         4.2.3. How to build and install
                    723: 
                    724: 5. Configuring pkgsrc
                    725: 
                    726:     5.1. General configuration
                    727:     5.2. Variables affecting the build process
1.4       rillig    728:     5.3. Variables affecting the installion process
                    729:     5.4. Selecting and configuring the compiler
1.1       dsieger   730: 
1.4       rillig    731:         5.4.1. Selecting the compiler
                    732:         5.4.2. Additional flags to the compiler (CFLAGS)
                    733:         5.4.3. Additional flags to the linker (LDFLAGS)
1.1       dsieger   734: 
1.4       rillig    735:     5.5. Developer/advanced settings
                    736:     5.6. Selecting Build Options
1.1       dsieger   737: 
                    738: 6. Creating binary packages
                    739: 
                    740:     6.1. Building a single binary package
                    741:     6.2. Settings for creation of binary packages
                    742:     6.3. Doing a bulk build of all packages
                    743: 
                    744:         6.3.1. Configuration
                    745:         6.3.2. Other environmental considerations
                    746:         6.3.3. Operation
                    747:         6.3.4. What it does
                    748:         6.3.5. Disk space requirements
                    749:         6.3.6. Setting up a sandbox for chrooted builds
                    750:         6.3.7. Building a partial set of packages
                    751:         6.3.8. Uploading results of a bulk build
                    752: 
                    753:     6.4. Creating a multiple CD-ROM packages collection
                    754: 
                    755:         6.4.1. Example of cdpack
                    756: 
                    757: 7. Directory layout of the installed files
                    758: 
                    759:     7.1. File system layout in ${LOCALBASE}
                    760:     7.2. File system layout in ${VARBASE}
                    761: 
                    762: 8. Frequently Asked Questions
                    763: 
                    764:     8.1. Are there any mailing lists for pkg-related discussion?
                    765:     8.2. Where's the pkgviews documentation?
                    766:     8.3. Utilities for package management (pkgtools)
                    767:     8.4. How to use pkgsrc as non-root
                    768:     8.5. How to resume transfers when fetching distfiles?
1.4       rillig    769:     8.6. How can I install/use modular X.org from pkgsrc?
                    770:     8.7. How to fetch files from behind a firewall
                    771:     8.8. How do I tell make fetch to do passive FTP?
                    772:     8.9. How to fetch all distfiles at once
                    773:     8.10. What does "Don't know how to make /usr/share/tmac/tmac.andoc" mean?
                    774:     8.11. What does "Could not find bsd.own.mk" mean?
                    775:     8.12. Using 'sudo' with pkgsrc
                    776:     8.13. How do I change the location of configuration files?
                    777:     8.14. Automated security checks
                    778:     8.15. Why do some packages ignore my CFLAGS?
                    779:     8.16. A package does not build. What shall I do?
                    780:     8.17. What does "Makefile appears to contain unresolved cvs/rcs/??? merge
1.1       dsieger   781:         conflicts" mean?
                    782: 
                    783: Chapter 2. Where to get pkgsrc and how to keep it up-to-date
                    784: 
                    785: Table of Contents
                    786: 
                    787: 2.1. Getting pkgsrc for the first time
                    788: 
                    789:     2.1.1. As tar file
                    790:     2.1.2. Via SUP
                    791:     2.1.3. Via anonymous CVS
                    792: 
                    793: 2.2. Keeping pkgsrc up-to-date
                    794: 
                    795:     2.2.1. Via tar files
                    796:     2.2.2. Via CVS
                    797: 
                    798: Before you download and extract the files, you need to decide where you want to
                    799: extract them. When using pkgsrc as root user, pkgsrc is usually installed in /
                    800: usr/pkgsrc. You are though free to install the sources and binary packages
                    801: wherever you want in your filesystem, provided that the pathname does not
                    802: contain white-space or other characters that are interpreted specially by the
                    803: shell and some other programs. A safe bet is to use only letters, digits,
                    804: underscores and dashes.
                    805: 
                    806: 2.1. Getting pkgsrc for the first time
                    807: 
                    808: Before you download any pkgsrc files, you should decide whether you want the
                    809: current branch or the stable branch. The latter is forked on a quarterly basis
                    810: from the current branch and only gets modified for security updates. The names
                    811: of the stable branches are built from the year and the quarter, for example
                    812: 2007Q1.
                    813: 
                    814: The second step is to decide how you want to download pkgsrc. You can get it as
                    815: a tar file, via SUP, or via CVS. All three ways are described here.
                    816: 
                    817: 2.1.1. As tar file
                    818: 
                    819: The primary download location for all pkgsrc files is ftp://ftp.NetBSD.org/pub/
                    820: pkgsrc/. There are a number of subdirectories for different purposes, which are
                    821: described in detail in Appendix C, Directory layout of the pkgsrc FTP server.
                    822: 
                    823: The tar file for the current branch is in the directory current and is called
                    824: pkgsrc.tar.gz. It is autogenerated daily.
                    825: 
                    826: The tar file for the stable branch 2007Q1 is in the directory pkgsrc-2007Q1 and
                    827: is also called pkgsrc-2007Q1.tar.gz.
                    828: 
                    829: After downloading the tar file, change to the directory where you want to have
                    830: pkgsrc. This is usually /usr. Then, run gzcat pkgsrc.tar.gz | tar xf - to
                    831: extract the files.
                    832: 
                    833: 2.1.2. Via SUP
                    834: 
                    835: As an alternative to the tar file, you can get pkgsrc via the Software Update
                    836: Protocol, SUP. To do so, make sure your supfile has a line
                    837: 
                    838: release=pkgsrc
                    839: 
                    840: in it, see the examples in /usr/share/examples/supfiles, and that the /usr/
                    841: pkgsrc directory exists. Then, simply run sup -v /path/to/your/supfile.
                    842: 
                    843: 2.1.3. Via anonymous CVS
                    844: 
                    845: To get pkgsrc via CVS, make sure you have cvs(1) installed. To do an initial
                    846: (full) checkout of pkgsrc, you first have to set some environment variables.
                    847: For the C-Shell, type:
                    848: 
                    849:     % setenv CVSROOT anoncvs@anoncvs.NetBSD.org:/cvsroot
                    850:     % setenv CVS_RSH ssh
                    851: 
                    852: Or, the same for the bourne shell:
                    853: 
                    854:     $ CVSROOT="anoncvs@anoncvs.NetBSD.org:/cvsroot"
                    855:     $ CVS_RSH="ssh"
                    856:     $ export CVSROOT CVS_RSH
                    857: 
1.2       rillig    858: By default, cvs doesn't do things like most people would expect it to do, and
                    859: this is unlikely to change. But there is a way to convince cvs, by creating a
                    860: file called .cvsrc in your home directory and saving the following lines to it.
                    861: This file will save you lots of headache and some bug reports, so we strongly
                    862: recommend it. You can find an explanation of this file in the CVS
                    863: documentation.
                    864: 
                    865: # recommended CVS configuration file from the pkgsrc guide
                    866: checkout -P
1.4       rillig    867: update -dP
1.2       rillig    868: release -d
1.4       rillig    869: diff -upN
1.2       rillig    870: cvs -q -z3
                    871: rdiff -u
                    872: 
1.1       dsieger   873: Then, you change to the directory where you want to have your copy of pkgsrc.
                    874: In most cases this is /usr. In that directory you run the checkout command,
                    875: which is cvs -q checkout -P pkgsrc for the current branch and cvs -q checkout
                    876: -rpkgsrc-2007Q1 -P pkgsrc for the stable branch. This command will create a
                    877: directory called pkgsrc with all the pkgsrc files in it.
                    878: 
                    879: 2.2. Keeping pkgsrc up-to-date
                    880: 
                    881: The preferred way to keep pkgsrc up-to-date is via CVS (which also works if you
                    882: have first installed it via a tar file). It saves bandwidth and hard disk
                    883: activity, compared to downloading the tar file again.
                    884: 
                    885: 2.2.1. Via tar files
                    886: 
                    887: Warning
                    888: 
                    889: When updating from a tar file, you first need to completely remove the old
                    890: pkgsrc directory. Otherwise those files that have been removed from pkgsrc in
                    891: the mean time will not be removed on your local disk, resulting in
                    892: inconsistencies. When removing the old files, any changes that you have done to
                    893: the pkgsrc files will be lost after updating. Therefore updating via CVS is
                    894: strongly recommended.
                    895: 
                    896: Note that by default the distfiles and the binary packages are saved in the
                    897: pkgsrc tree, so don't forget to rescue them before updating. You can also
                    898: configure pkgsrc to use other than the default directories by setting the
                    899: DISTDIR and PACKAGES variables. See Chapter 5, Configuring pkgsrc for the
                    900: details.
                    901: 
                    902: To update pkgsrc from a tar file, download the tar file as explained above.
                    903: Then, make sure that you have not made any changes to the files in the pkgsrc
                    904: directory. Remove the pkgsrc directory and extract the new tar file. Done.
                    905: 
                    906: 2.2.2. Via CVS
                    907: 
                    908: To update pkgsrc via CVS, make sure the environment variable CVS_RSH is set as
                    909: above. Then, change to the pkgsrc directory and run cvs -q update -dP.
                    910: 
                    911: 2.2.2.1. Switching between different pkgsrc branches
                    912: 
                    913: When updating pkgsrc, the CVS program keeps track of the branch you selected.
                    914: But if you, for whatever reason, want to switch from the stable branch to the
                    915: current one, you can do it by adding the option "-A" after the "update"
                    916: keyword. To switch from the current branch back to the stable branch, add the
                    917: "-rpkgsrc-2007Q1" option.
                    918: 
                    919: 2.2.2.2. What happens to my changes when updating?
                    920: 
                    921: When you update pkgsrc, the CVS program will only touch those files that are
                    922: registered in the CVS repository. That means that any packages that you created
                    923: on your own will stay unmodified. If you change files that are managed by CVS,
                    924: later updates will try to merge your changes with those that have been done by
                    925: others. See the CVS manual, chapter "update" for details.
                    926: 
                    927: Chapter 3. Using pkgsrc on systems other than NetBSD
                    928: 
                    929: Table of Contents
                    930: 
                    931: 3.1. Binary distribution
                    932: 3.2. Bootstrapping pkgsrc
                    933: 3.3. Platform-specific notes
                    934: 
                    935:     3.3.1. Darwin (Mac OS X)
                    936:     3.3.2. FreeBSD
                    937:     3.3.3. Interix
                    938:     3.3.4. IRIX
                    939:     3.3.5. Linux
                    940:     3.3.6. OpenBSD
                    941:     3.3.7. Solaris
                    942: 
                    943: 3.1. Binary distribution
                    944: 
                    945: We provide a bootstrap kit in both source and binary form for other platforms
                    946: than NetBSD, consisting of the pkg administration tools and other tools
                    947: required to use pkgsrc and build packages.
                    948: 
                    949: Note
                    950: 
                    951: Older binary snapshots are available in the bootstrap-pkgsrc/archive directory
                    952: on ftp.NetBSD.org.
                    953: 
                    954: Table 3.1. Binary kits and available packages
                    955: 
                    956: +------------------------------------------------------------------------------+
                    957: |             Platform              |Latest snapshot|Binary kit|Binary packages|
                    958: |-----------------------------------+---------------+----------+---------------|
                    959: |Darwin 5.5/powerpc (Mac OS X       |20021209       |binary kit|               |
                    960: |10.1.5)                            |               |          |               |
                    961: |-----------------------------------+---------------+----------+---------------|
                    962: |Darwin 6.6/powerpc (Mac OS X       |20030623       |binary kit|               |
                    963: |10.2.6)                            |               |          |               |
                    964: |-----------------------------------+---------------+----------+---------------|
                    965: |Darwin 7.6/powerpc (Mac OS X       |20041219       |binary kit|binary packages|
                    966: |10.3.6)                            |               |          |               |
                    967: |-----------------------------------+---------------+----------+---------------|
                    968: |Darwin 7.8/powerpc (Mac OS X       |20050320       |binary kit|               |
                    969: |10.3.8)                            |               |          |               |
                    970: |-----------------------------------+---------------+----------+---------------|
                    971: |Darwin 8.1/powerpc (Mac OS X       |20050625       |binary kit|binary packages|
                    972: |10.4.1)                            |               |          |               |
                    973: |-----------------------------------+---------------+----------+---------------|
                    974: |Debian GNU Linux/i386              |20031023       |binary kit|               |
                    975: |-----------------------------------+---------------+----------+---------------|
                    976: |Fedora Core 2 Linux/i386           |20050618       |binary kit|               |
                    977: |-----------------------------------+---------------+----------+---------------|
                    978: |Fedora Core 4 Linux/i386           |20060105       |binary kit|               |
                    979: |-----------------------------------+---------------+----------+---------------|
                    980: |FreeBSD 3.5/i386                   |20030411       |binary kit|               |
                    981: |-----------------------------------+---------------+----------+---------------|
                    982: |FreeBSD 4.7/i386                   |20021211       |binary kit|               |
                    983: |-----------------------------------+---------------+----------+---------------|
                    984: |FreeBSD 5.0/i386                   |20030411       |binary kit|               |
                    985: |-----------------------------------+---------------+----------+---------------|
                    986: |FreeBSD 5.1/i386                   |20030630       |binary kit|               |
                    987: |-----------------------------------+---------------+----------+---------------|
                    988: |FreeBSD 5.2.1/i386                 |20040227       |binary kit|               |
                    989: |-----------------------------------+---------------+----------+---------------|
                    990: |FreeBSD 5.3/i386                   |20050119       |binary kit|               |
                    991: |-----------------------------------+---------------+----------+---------------|
                    992: |HP-UX 11.11/hppa                   |20070421       |binary kit|               |
                    993: |-----------------------------------+---------------+----------+---------------|
                    994: |Interix 3.5                        |20061106       |binary kit|               |
                    995: |-----------------------------------+---------------+----------+---------------|
                    996: |IRIX 6.5 n32-bit ABI               |20040911       |binary kit|binary packages|
                    997: |-----------------------------------+---------------+----------+---------------|
                    998: |IRIX 6.5 64-bit ABI                |20040912       |binary kit|binary packages|
                    999: |-----------------------------------+---------------+----------+---------------|
                   1000: |OpenBSD 3.2/i386                   |20030420       |binary kit|               |
                   1001: |-----------------------------------+---------------+----------+---------------|
                   1002: |OpenBSD 3.3/i386                   |20030503       |binary kit|               |
                   1003: |-----------------------------------+---------------+----------+---------------|
                   1004: |OpenBSD 3.5/i386                   |20040703       |binary kit|               |
                   1005: |-----------------------------------+---------------+----------+---------------|
                   1006: |OSF1 5.1/alpha                     |20070420       |binary kit|               |
                   1007: |-----------------------------------+---------------+----------+---------------|
                   1008: |Slackware Linux 8.1/i386           |20030417       |binary kit|               |
                   1009: |-----------------------------------+---------------+----------+---------------|
                   1010: |Slackware Linux 9/i386             |20040703       |binary kit|               |
                   1011: |-----------------------------------+---------------+----------+---------------|
                   1012: |Solaris 8/sparc                    |20050220       |binary kit|               |
                   1013: |-----------------------------------+---------------+----------+---------------|
                   1014: |Solaris 8/i386                     |20050220       |binary kit|               |
                   1015: |-----------------------------------+---------------+----------+---------------|
                   1016: |Solaris 9/sparc                    |20060713       |binary kit|               |
                   1017: |-----------------------------------+---------------+----------+---------------|
                   1018: |Solaris 9/i386                     |20030411       |binary kit|               |
                   1019: +------------------------------------------------------------------------------+
                   1020: 
                   1021: 
                   1022: Simply download the binary kit for your platform, and extract it into / e.g.
                   1023: 
                   1024: # cd /
                   1025: # gzip -c -d /tmp/bootstrap-pkgsrc-SunOS-5.9-sparc-20031023.tar.gz \
                   1026:   | tar -xpf -
                   1027: 
                   1028: Of course, as with any binary distributions, you should verify the checksum
                   1029: against the SUM or CKSUM file and inspect the contents before extracting it.
                   1030: 
                   1031: 3.2. Bootstrapping pkgsrc
                   1032: 
                   1033: Installing the bootstrap kit from source should be as simple as:
                   1034: 
                   1035: # env CVS_RSH=ssh cvs -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout pkgsrc
                   1036: # cd pkgsrc/bootstrap
                   1037: # ./bootstrap
                   1038: 
                   1039: 
                   1040: See Chapter 2, Where to get pkgsrc and how to keep it up-to-date for other ways
                   1041: to get pkgsrc before bootstrapping. The given bootstrap command will use the
                   1042: defaults of /usr/pkg for the prefix where programs will be installed in, and /
                   1043: var/db/pkg for the package database directory where pkgsrc will do its internal
                   1044: bookkeeping. However, these can also be set using command-line arguments.
                   1045: 
                   1046: Binary packages for the pkgsrc tools and an initial set of packages is
                   1047: available for supported platforms. An up-to-date list of these can be found on
                   1048: www.pkgsrc.org. Note that this only works for privileged builds that install
                   1049: into /usr/pkg.
                   1050: 
                   1051: Note
                   1052: 
                   1053: The bootstrap installs a bmake tool. Use this bmake when building via pkgsrc.
                   1054: For examples in this guide, use bmake instead of "make".
                   1055: 
                   1056: 3.3. Platform-specific notes
                   1057: 
                   1058: Here are some platform-specific notes you should be aware of.
                   1059: 
                   1060: 3.3.1. Darwin (Mac OS X)
                   1061: 
                   1062: Darwin 5.x and up are supported. There are two methods of using pkgsrc on Mac
                   1063: OS X, by using a disk image, or a UFS or HFSX partition.
                   1064: 
                   1065: Before you start, you will need to download and install the Mac OS X Developer
                   1066: Tools from Apple's Developer Connection. See http://developer.apple.com/macosx/
                   1067: for details. Also, make sure you install X11 for Mac OS X and the X11 SDK from
                   1068: http://www.apple.com/macosx/x11/download/ if you intend to build packages that
                   1069: use the X11 Window System.
                   1070: 
                   1071: If you already have a UFS or HFSX partition, or have a spare partition that you
                   1072: can format as UFS or HFSX, it is recommended to use that instead of the disk
                   1073: image. It'll be somewhat faster and will mount automatically at boot time,
                   1074: where you must manually mount a disk image.
                   1075: 
                   1076: Note
                   1077: 
                   1078: You cannot use an ordinary HFS+ file system for pkgsrc, because pkgsrc
                   1079: currently requires the file system to be case-sensitive. You can, however, use
                   1080: a case-sensitive HFS+ (aka HFSX) file system as found in Darwin 7.0 and newer.
                   1081: 
                   1082: 3.3.1.1. Using a disk image
                   1083: 
                   1084: Create the disk image:
                   1085: 
                   1086: # cd pkgsrc/bootstrap
                   1087: # ./darwindiskimage create ~/Documents/NetBSD 1024 # megabytes - season to taste
                   1088: # ./darwindiskimage mount ~/Documents/NetBSD
                   1089: # sudo chown `id -u`:`id -g` /Volumes/NetBSD
                   1090: 
                   1091: Note
                   1092: 
                   1093: darwindiskimage will mount the filesystem nosuid, which will cause problems for
                   1094: packages that depend on setgid. In the case of UFS, it will also mount the
                   1095: filesystem asynchronous, which is somewhat dangerous according to the mount(8)
                   1096: man page. In the case of HFSX, it will disable journalling.
                   1097: 
                   1098: Allow suid:
                   1099: 
                   1100: # sudo mount -u -o suid /Volumes/NetBSD
                   1101: 
1.5     ! weinem   1102: Changing the build directory:
        !          1103: 
        !          1104: After bootstrapping you need to change the default package build directory to
        !          1105: somewhere outside the disk image so it doesn't get filled up in the process of
        !          1106: building packages. Add something like that to mk.conf.
        !          1107: 
        !          1108:           WRKOBJDIR?=           /tmp/pkgsrc         # build here instead of in pkgsrc
        !          1109: 
        !          1110: 
1.1       dsieger  1111: 3.3.1.2. Using a UFS or HFSX partition
                   1112: 
                   1113: By default, /usr will be on your root file system, normally HFS+. It is
                   1114: possible to use the default prefix of /usr/pkg by symlinking /usr/pkg to a
                   1115: directory on a UFS or HFSX file system. Obviously, another symlink is required
                   1116: if you want to place the package database directory outside the prefix. e.g.
                   1117: 
                   1118: # ./bootstrap --pkgdbdir /usr/pkg/pkgdb
                   1119: 
                   1120: If you created your partitions at the time of installing Mac OS X and formatted
                   1121: the target partition as UFS or HFSX, it should automatically mount on /Volumes/
                   1122: <volume name> when the machine boots. If you are (re)formatting a partition as
                   1123: UFS or HFSX, you need to ensure that the partition map correctly reflects
                   1124: "Apple_UFS" or "Apple_HFSX" and not "Apple_HFS".
                   1125: 
                   1126: The problem is that none of the disk tools will let you touch a disk that is
                   1127: booted from. You can unmount the partition, but even if you newfs it, the
                   1128: partition type will be incorrect and the automounter won't mount it. It can be
                   1129: mounted manually, but it won't appear in Finder.
                   1130: 
                   1131: You'll need to boot off of the OS X Installation (User) CD. When the
                   1132: Installation program starts, go up to the menu and select Disk Utility. Now,
                   1133: you will be able to select the partition you want to be UFS or HFSX, and Format
                   1134: it Apple UFS or HFSX. Quit the Disk Utility, quit the installer which will
                   1135: reboot your machine. The new UFS or HFSX file system will appear in Finder.
                   1136: 
                   1137: Be aware that the permissions on the new file system will be writable by root
                   1138: only.
                   1139: 
                   1140: This note is as of 10.2 (Jaguar) and applies to earlier versions. Hopefully
                   1141: Apple will fix Disk Utility in 10.3 (Panther).
                   1142: 
                   1143: 3.3.2. FreeBSD
                   1144: 
                   1145: FreeBSD 4.7 and 5.0 have been tested and are supported, other versions may
                   1146: work.
                   1147: 
                   1148: Care should be taken so that the tools that this kit installs do not conflict
                   1149: with the FreeBSD userland tools. There are several steps:
                   1150: 
                   1151:  1. FreeBSD stores its ports pkg database in /var/db/pkg. It is therefore
                   1152:     recommended that you choose a different location (e.g. /usr/pkgdb) by using
                   1153:     the --pkgdbdir option to the bootstrap script.
                   1154: 
                   1155:  2. If you do not intend to use the FreeBSD ports tools, it's probably a good
                   1156:     idea to move them out of the way to avoid confusion, e.g.
                   1157: 
                   1158:     # cd /usr/sbin
                   1159:     # mv pkg_add pkg_add.orig
                   1160:     # mv pkg_create pkg_create.orig
                   1161:     # mv pkg_delete pkg_delete.orig
                   1162:     # mv pkg_info pkg_info.orig
                   1163: 
                   1164: 
1.4       rillig   1165:  3. An example mk.conf file will be placed in /etc/mk.conf.example file when
                   1166:     you use the bootstrap script.
1.1       dsieger  1167: 
                   1168: 3.3.3. Interix
                   1169: 
                   1170: Interix is a POSIX-compatible subsystem for the Windows NT kernel, providing a
                   1171: Unix-like environment with a tighter kernel integration than available with
                   1172: Cygwin. It is part of the Windows Services for Unix package, available for free
                   1173: for any licensed copy of Windows 2000, XP (not including XP Home), or 2003. SFU
                   1174: can be downloaded from http://www.microsoft.com/windows/sfu/.
                   1175: 
                   1176: Services for Unix 3.5 has been tested. 3.0 or 3.1 may work, but are not
                   1177: officially supported. (The main difference in 3.0/3.1 is lack of pthreads, but
                   1178: other parts of libc may also be lacking.)
                   1179: 
                   1180: Services for Unix Applications (aka SUA) is an integrated component of Windows
                   1181: Server 2003 R2 and Windows Vista. As of this writing, SUA's Interix 5.x
                   1182: subsystem has not yet been tested with pkgsrc.
                   1183: 
                   1184: 3.3.3.1. When installing Interix/SFU
                   1185: 
                   1186: At an absolute minimum, the following packages must be installed from the
                   1187: Windows Services for Unix 3.5 distribution in order to use pkgsrc:
                   1188: 
                   1189:   * Utilities -> Base Utilities
                   1190: 
                   1191:   * Interix GNU Components -> (all)
                   1192: 
                   1193:   * Remote Connectivity
                   1194: 
                   1195:   * Interix SDK
                   1196: 
                   1197: When using pkgsrc on Interix, DO NOT install the Utilities subcomponent "UNIX
                   1198: Perl". That is Perl 5.6 without shared module support, installed to /usr/local,
                   1199: and will only cause confusion. Instead, install Perl 5.8 from pkgsrc (or from a
                   1200: binary package).
                   1201: 
                   1202: The Remote Connectivity subcomponent "Windows Remote Shell Service" does not
                   1203: need to be installed, but Remote Connectivity itself should be installed in
                   1204: order to have a working inetd.
                   1205: 
                   1206: During installation you may be asked whether to enable setuid behavior for
                   1207: Interix programs, and whether to make pathnames default to case-sensitive.
                   1208: Setuid should be enabled, and case-sensitivity MUST be enabled. (Without
                   1209: case-sensitivity, a large number of packages including perl will not build.)
                   1210: 
                   1211: NOTE: Newer Windows service packs change the way binary execution works (via
                   1212: the Data Execution Prevention feature). In order to use pkgsrc and other
                   1213: gcc-compiled binaries reliably, a hotfix containing POSIX.EXE, PSXDLL.DLL,
                   1214: PSXRUN.EXE, and PSXSS.EXE (899522 or newer) must be installed. Hotfixes are
                   1215: available from Microsoft through a support contract; however, a NetBSD
                   1216: developer has made most Interix hotfixes available for personal use from http:/
                   1217: /www.duh.org/interix/hotfixes.php.
                   1218: 
                   1219: In addition to the hotfix noted above, it may be necessary to disable Data
                   1220: Execution Prevention entirely to make Interix functional. This may happen only
                   1221: with certain types of CPUs; the cause is not fully understood at this time. If
                   1222: gcc or other applications still segfault repeatedly after installing one of the
                   1223: hotfixes note above, the following option can be added to the appropriate
                   1224: "boot.ini" line on the Windows boot drive: /NoExecute=AlwaysOff (WARNING, this
                   1225: will disable DEP completely, which may be a security risk if applications are
                   1226: often run as a user in the Administrators group!)
                   1227: 
                   1228: 3.3.3.2. What to do if Interix/SFU is already installed
                   1229: 
                   1230: If SFU is already installed and you wish to alter these settings to work with
                   1231: pkgsrc, note the following things.
                   1232: 
                   1233:   * To uninstall UNIX Perl, use Add/Remove Programs, select Microsoft Windows
                   1234:     Services for UNIX, then click Change. In the installer, choose Add or
                   1235:     Remove, then uncheck Utilities->UNIX Perl.
                   1236: 
                   1237:   * To enable case-sensitivity for the file system, run REGEDIT.EXE, and change
                   1238:     the following registry key:
                   1239: 
                   1240:     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\kernel
                   1241: 
                   1242:     Set the DWORD value "obcaseinsensitive" to 0; then reboot.
                   1243: 
                   1244:   * To enable setuid binaries (optional), run REGEDIT.EXE, and change the
                   1245:     following registry key:
                   1246: 
                   1247:     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Services for UNIX
                   1248: 
                   1249:     Set the DWORD value "EnableSetuidBinaries" to 1; then reboot.
                   1250: 
                   1251: 3.3.3.3. Important notes for using pkgsrc
                   1252: 
                   1253: The package manager (either the pkgsrc "su" user, or the user running
                   1254: "pkg_add") must be a member of the local Administrators group. Such a user must
                   1255: also be used to run the bootstrap. This is slightly relaxed from the normal
                   1256: pkgsrc requirement of "root".
                   1257: 
                   1258: The package manager should use a umask of 002. "make install" will
                   1259: automatically complain if this is not the case. This ensures that directories
                   1260: written in /var/db/pkg are Administrators-group writeable.
                   1261: 
                   1262: The popular Interix binary packages from http://www.interopsystems.com/ use an
                   1263: older version of pkgsrc's pkg_* tools. Ideally, these should NOT be used in
                   1264: conjunction with pkgsrc. If you choose to use them at the same time as the
                   1265: pkgsrc packages, ensure that you use the proper pkg_* tools for each type of
                   1266: binary package.
                   1267: 
                   1268: The TERM setting used for DOS-type console windows (including those invoked by
                   1269: the csh and ksh startup shortcuts) is "interix". Most systems don't have a
                   1270: termcap/terminfo entry for it, but the following .termcap entry provides
                   1271: adequate emulation in most cases:
                   1272: 
                   1273: interix:kP=\E[S:kN=\E[T:kH=\E[U:dc@:DC@:tc=pcansi:
                   1274: 
                   1275: 
                   1276: 3.3.3.4. Limitations of the Interix platform
                   1277: 
                   1278: Though Interix suffices as a familiar and flexible substitute for a full
                   1279: Unix-like platform, it has some drawbacks that should be noted for those
                   1280: desiring to make the most of Interix.
                   1281: 
                   1282:   * X11:
                   1283: 
                   1284:     Interix comes with the standard set of X11R6 client libraries, and can run
                   1285:     X11 based applications, but it does not come with an X server. Some options
                   1286:     are StarNet X-Win32, Hummingbird Exceed (available in a trimmed version for
                   1287:     Interix from Interop Systems as the Interop X Server), and the free X11
                   1288:     server included with Cygwin.
                   1289: 
                   1290:   * X11 acceleration:
                   1291: 
                   1292:     Because Interix runs in a completely different NT subsystem from Win32
                   1293:     applications, it does not currently support various X11 protocol extensions
                   1294:     for acceleration (such as MIT-SHM or DGA). Most interactive applications to
                   1295:     a local X server will run reasonably fast, but full motion video and other
                   1296:     graphics intensive applications may require a faster-than-expected CPU.
                   1297: 
                   1298:   * Audio:
                   1299: 
                   1300:     Interix has no native support for audio output. For audio support, pkgsrc
                   1301:     uses the esound client/server audio system on Interix. Unlike on most
                   1302:     platforms, the audio/esound package does not contain the esd server
                   1303:     component. To output audio via an Interix host, the emulators/cygwin_esound
                   1304:     package must also be installed.
                   1305: 
                   1306:   * CD/DVDs, USB, and SCSI:
                   1307: 
                   1308:     Direct device access is not currently supported in Interix, so it is not
                   1309:     currently possible to access CD/DVD drives, USB devices, or SCSI devices
                   1310:     through non-filesystem means. Among other things, this makes it impossible
                   1311:     to use Interix directly for CD/DVD burning.
                   1312: 
                   1313:   * Tape drives:
                   1314: 
                   1315:     Due to the same limitations as for CD-ROMs and SCSI devices, tape drives
                   1316:     are also not directly accessible in Interix. However, support is in work to
                   1317:     make tape drive access possible by using Cygwin as a bridge (similarly to
                   1318:     audio bridged via Cygwin's esound server).
                   1319: 
                   1320: 3.3.3.5. Known issues for pkgsrc on Interix
                   1321: 
                   1322: It is not necessary, in general, to have a "root" user on the Windows system;
                   1323: any member of the local Administrators group will suffice. However, some
                   1324: packages currently assume that the user named "root" is the privileged user. To
                   1325: accommodate these, you may create such a user; make sure it is in the local
                   1326: group Administrators (or your language equivalent).
                   1327: 
                   1328: pkg_add creates directories of mode 0755, not 0775, in $PKG_DBDIR. For the time
                   1329: being, install packages as the local Administrator (or your language
                   1330: equivalent), or run the following command after installing a package to work
                   1331: around the issue:
                   1332: 
                   1333: # chmod -R g+w $PKG_DBDIR
                   1334: 
                   1335: 
                   1336: 3.3.4. IRIX
                   1337: 
                   1338: You will need a working C compiler, either gcc or SGI's MIPS and MIPSpro
                   1339: compiler (cc/c89). Please set the CC environment variable according to your
                   1340: preference. If you do not have a license for the MIPSpro compiler suite, you
                   1341: can download a gcc tardist file from http://freeware.sgi.com/.
                   1342: 
                   1343: Please note that you will need IRIX 6.5.17 or higher, as this is the earliest
                   1344: version of IRIX providing support for if_indextoname(3), if_nametoindex(3),
                   1345: etc.
                   1346: 
                   1347: At this point in time, pkgsrc only supports one ABI at a time. That is, you
                   1348: cannot switch between the old 32-bit ABI, the new 32-bit ABI and the 64-bit
                   1349: ABI. If you start out using "abi=n32", that's what all your packages will be
                   1350: built with.
                   1351: 
                   1352: Therefore, please make sure that you have no conflicting CFLAGS in your
1.4       rillig   1353: environment or the mk.conf. Particularly, make sure that you do not try to link
                   1354: n32 object files with lib64 or vice versa. Check your /etc/compiler.defaults!
1.1       dsieger  1355: 
                   1356: If you have the actual pkgsrc tree mounted via NFS from a different host,
                   1357: please make sure to set WRKOBJDIR to a local directory, as it appears that IRIX
                   1358: linker occasionally runs into issues when trying to link over a network-mounted
                   1359: file system.
                   1360: 
                   1361: The bootstrapping process should set all the right options for programs such as
                   1362: imake(1), but you may want to set some options depending on your local setup.
                   1363: Please see pkgsrc/mk/defaults/mk.conf and, of course, your compiler's man pages
                   1364: for details.
                   1365: 
                   1366: If you are using SGI's MIPSPro compiler, please set
                   1367: 
                   1368: PKGSRC_COMPILER=        mipspro
                   1369: 
                   1370: 
1.4       rillig   1371: in mk.conf. Otherwise, pkgsrc will assume you are using gcc and may end up
1.1       dsieger  1372: passing invalid flags to the compiler. Note that bootstrap should create an
                   1373: appropriate mk.conf.example by default.
                   1374: 
                   1375: If you have both the MIPSPro compiler chain installed as well as gcc, but want
                   1376: to make sure that MIPSPro is used, please set your PATH to not include the
                   1377: location of gcc (often /usr/freeware/bin), and (important) pass the
                   1378: '--preserve-path' flag.
                   1379: 
                   1380: 3.3.5. Linux
                   1381: 
                   1382: Some versions of Linux (for example Debian GNU/Linux) need either libtermcap or
                   1383: libcurses (libncurses). Installing the distributions libncurses-dev package (or
                   1384: equivalent) should fix the problem.
                   1385: 
                   1386: pkgsrc supports both gcc (GNU Compiler Collection) and icc (Intel C++
                   1387: Compiler). gcc is the default. icc 8.0 and 8.1 on i386 have been tested.
                   1388: 
                   1389: To bootstrap using icc, assuming the default icc installation directory:
                   1390: 
                   1391: env CC=/opt/intel_cc_80/bin/icc LDFLAGS=-static-libcxa \
                   1392: ac_cv___attribute__=yes ./bootstrap
                   1393: 
                   1394: 
                   1395: Note
                   1396: 
                   1397: icc 8.1 needs the `-i-static' argument instead of -static-libcxa.
                   1398: 
                   1399: icc supports __attribute__, but the GNU configure test uses a nested function,
                   1400: which icc does not support. #undef'ing __attribute__ has the unfortunate
                   1401: side-effect of breaking many of the Linux header files, which cannot be
                   1402: compiled properly without __attribute__. The test must be overridden so that
                   1403: __attribute__ is assumed supported by the compiler.
                   1404: 
1.4       rillig   1405: After bootstrapping, you should set PKGSRC_COMPILER in mk.conf:
1.1       dsieger  1406: 
                   1407: PKGSRC_COMPILER=        icc
                   1408: 
                   1409: 
                   1410: The default installation directory for icc is /opt/intel_cc_80, which is also
                   1411: the pkgsrc default. If you have installed it into a different directory, set
1.4       rillig   1412: ICCBASE in mk.conf:
1.1       dsieger  1413: 
                   1414: ICCBASE=                /opt/icc
                   1415: 
                   1416: 
                   1417: pkgsrc uses the static linking method of the runtime libraries provided by icc,
                   1418: so binaries can be run on other systems which do not have the shared libraries
                   1419: installed.
                   1420: 
                   1421: Libtool, however, extracts a list of libraries from the ld(1) command run when
                   1422: linking a C++ shared library and records it, throwing away the -Bstatic and
                   1423: -Bdynamic options interspersed between the libraries. This means that
                   1424: libtool-linked C++ shared libraries will have a runtime dependency on the icc
                   1425: libraries until this is fixed in libtool.
                   1426: 
                   1427: 3.3.6. OpenBSD
                   1428: 
                   1429: OpenBSD 3.0 and 3.2 are tested and supported.
                   1430: 
                   1431: Care should be taken so that the tools that this kit installs do not conflict
                   1432: with the OpenBSD userland tools. There are several steps:
                   1433: 
                   1434:  1. OpenBSD stores its ports pkg database in /var/db/pkg. It is therefore
                   1435:     recommended that you choose a different location (e.g. /usr/pkgdb) by using
                   1436:     the --pkgdbdir option to the bootstrap script.
                   1437: 
                   1438:  2. If you do not intend to use the OpenBSD ports tools, it's probably a good
                   1439:     idea to move them out of the way to avoid confusion, e.g.
                   1440: 
                   1441:     # cd /usr/sbin
                   1442:     # mv pkg_add pkg_add.orig
                   1443:     # mv pkg_create pkg_create.orig
                   1444:     # mv pkg_delete pkg_delete.orig
                   1445:     # mv pkg_info pkg_info.orig
                   1446: 
                   1447: 
1.4       rillig   1448:  3. An example mk.conf file will be placed in /etc/mk.conf.example file when
                   1449:     you use the bootstrap script. OpenBSD's make program uses mk.conf as well.
                   1450:     You can work around this by enclosing all the pkgsrc-specific parts of the
                   1451:     file with:
1.1       dsieger  1452: 
                   1453:     .ifdef BSD_PKG_MK
                   1454:     # pkgsrc stuff, e.g. insert defaults/mk.conf or similar here
                   1455:     .else
                   1456:     # OpenBSD stuff
                   1457:     .endif
                   1458: 
                   1459: 
                   1460: 3.3.7. Solaris
                   1461: 
                   1462: Solaris 2.6 through 9 are supported on both x86 and sparc. You will need a
                   1463: working C compiler. Both gcc 2.95.3 and Sun WorkShop 5 have been tested.
                   1464: 
                   1465: The following packages are required on Solaris 8 for the bootstrap process and
                   1466: to build packages.
                   1467: 
                   1468:   * SUNWsprot
                   1469: 
                   1470:   * SUNWarc
                   1471: 
                   1472:   * SUNWbtool
                   1473: 
                   1474:   * SUNWtoo
                   1475: 
                   1476:   * SUNWlibm
                   1477: 
                   1478: Please note that the use of GNU binutils on Solaris is not supported, as of
                   1479: June 2006.
                   1480: 
                   1481: Whichever compiler you use, please ensure the compiler tools and your $prefix
                   1482: are in your PATH. This includes /usr/ccs/{bin,lib} and e.g. /usr/pkg/
                   1483: {bin,sbin}.
                   1484: 
                   1485: 3.3.7.1. If you are using gcc
                   1486: 
                   1487: It makes life much simpler if you only use the same gcc consistently for
                   1488: building all packages.
                   1489: 
                   1490: It is recommended that an external gcc be used only for bootstrapping, then
                   1491: either build gcc from lang/gcc or install a binary gcc package, then remove gcc
                   1492: used during bootstrapping.
                   1493: 
                   1494: Binary packages of gcc can be found through http://www.sunfreeware.com/.
                   1495: 
                   1496: 3.3.7.2. If you are using Sun WorkShop
                   1497: 
                   1498: You will need at least the following packages installed (from WorkShop 5.0)
                   1499: 
                   1500:   * SPROcc - Sun WorkShop Compiler C 5.0
                   1501: 
                   1502:   * SPROcpl - Sun WorkShop Compiler C++ 5.0
                   1503: 
                   1504:   * SPROild - Sun WorkShop Incremental Linker
                   1505: 
                   1506:   * SPROlang - Sun WorkShop Compilers common components
                   1507: 
                   1508: You should set the following variables in your mk.conf file:
                   1509: 
                   1510: CC=     cc
                   1511: CXX=    CC
                   1512: CPP=    cc -E
                   1513: CXXCPP= CC -E
                   1514: 
                   1515: Note
                   1516: 
                   1517: The CPP setting might break some packages that use the C preprocessor for
                   1518: processing things other than C source code.
                   1519: 
                   1520: 3.3.7.3. Building 64-bit binaries with SunPro
                   1521: 
                   1522: To build 64-bit packages, you just need to have the following lines in your
                   1523: mk.conf file:
                   1524: 
                   1525: PKGSRC_COMPILER=        sunpro
                   1526: ABI=                    64
                   1527: 
                   1528: Note
                   1529: 
                   1530: This setting has been tested for the SPARC architecture. Intel and AMD machines
                   1531: need some more work.
                   1532: 
                   1533: 3.3.7.4. Common problems
                   1534: 
                   1535: Sometimes, when using libtool, /bin/ksh crashes with a segmentation fault. The
                   1536: workaround is to use another shell for the configure scripts, for example by
                   1537: installing shells/bash and adding the following lines to your mk.conf:
                   1538: 
                   1539: CONFIG_SHELL=   ${LOCALBASE}/bin/bash
                   1540: WRAPPER_SHELL=  ${LOCALBASE}/bin/bash
                   1541: 
                   1542: 
                   1543: Then, rebuild the devel/libtool-base package.
                   1544: 
                   1545: Chapter 4. Using pkgsrc
                   1546: 
                   1547: Table of Contents
                   1548: 
                   1549: 4.1. Using binary packages
                   1550: 
                   1551:     4.1.1. Finding binary packages
                   1552:     4.1.2. Installing binary packages
                   1553:     4.1.3. Deinstalling packages
                   1554:     4.1.4. Getting information about installed packages
                   1555:     4.1.5. Checking for security vulnerabilities in installed packages
                   1556:     4.1.6. Finding if newer versions of your installed packages are in pkgsrc
                   1557:     4.1.7. Other administrative functions
                   1558:     4.1.8. A word of warning
                   1559: 
                   1560: 4.2. Building packages from source
                   1561: 
                   1562:     4.2.1. Requirements
                   1563:     4.2.2. Fetching distfiles
                   1564:     4.2.3. How to build and install
                   1565: 
                   1566: Basically, there are two ways of using pkgsrc. The first is to only install the
                   1567: package tools and to use binary packages that someone else has prepared. This
                   1568: is the "pkg" in pkgsrc. The second way is to install the "src" of pkgsrc, too.
                   1569: Then you are able to build your own packages, and you can still use binary
                   1570: packages from someone else.
                   1571: 
                   1572: 4.1. Using binary packages
                   1573: 
                   1574: To use binary packages, you need some tools to manage them. On NetBSD, these
                   1575: tools are already installed. On all other operating systems, you need to
1.5     ! weinem   1576: install them first. For some platforms, these tools are already packages in an
        !          1577: archive, ready to be extracted in the / directory. They can be found in the
        !          1578: bootstrap-pkgsrc directory of the FTP server.
1.1       dsieger  1579: 
                   1580: These pre-built package tools use /usr/pkg for the base directory, and /var/db/
                   1581: pkg for the database of installed packages. If you cannot use these directories
                   1582: for whatever reasons (maybe because you're not root), you have to build the
                   1583: package tools yourself, which is explained in Section 3.2, "Bootstrapping
                   1584: pkgsrc".
                   1585: 
                   1586: 4.1.1. Finding binary packages
                   1587: 
1.5     ! weinem   1588: To install binary packages, you first need to know from where to get them. The
        !          1589: first place where you should look is on the main pkgsrc FTP server in the
        !          1590: directory /pub/pkgsrc/packages.
        !          1591: 
        !          1592: This directory contains binary packages for multiple platforms. First, select
        !          1593: your operating system. (Ignore the directories with version numbers attached to
        !          1594: it, they just exist for legacy reasons.) Then, select your hardware
        !          1595: architecture, and in the third step, the OS version and the "version" of
        !          1596: pkgsrc. This directory contains a subdirectory called All, where (almost) all
        !          1597: binary packages are stored. Almost, because vulnerable packages are moved to
        !          1598: the vulnerable directory so they don't get installed accidentally.
1.1       dsieger  1599: 
                   1600: 4.1.2. Installing binary packages
                   1601: 
                   1602: If you have the files on a CD-ROM or downloaded them to your hard disk, you can
                   1603: install them with the following command (be sure to su to root first):
                   1604: 
                   1605: # pkg_add /path/to/package.tgz
                   1606: 
                   1607: If you have FTP access and you don't want to download the packages via FTP
                   1608: prior to installation, you can do this automatically by giving pkg_add an FTP
                   1609: URL:
                   1610: 
1.5     ! weinem   1611: # pkg_add ftp://ftp.NetBSD.org/pub/pkgsrc/packages/OPSYS/ARCH/VERSIONS/All/package
1.1       dsieger  1612: 
                   1613: Note that any prerequisite packages needed to run the package in question will
                   1614: be installed, too, assuming they are present where you install from.
                   1615: 
                   1616: To save some typing, you can set the PKG_PATH environment variable to a
                   1617: semicolon-separated list of paths (including remote URLs); trailing slashes are
                   1618: not allowed.
                   1619: 
                   1620: Additionally to the All directory there exists a vulnerable directory to which
                   1621: binary packages with known vulnerabilities are moved, since removing them could
                   1622: cause missing dependencies. To use these packages, add the vulnerable directory
                   1623: to your PKG_PATH. However, you should run security/audit-packages regularly,
                   1624: especially after installing new packages, and verify that the vulnerabilities
                   1625: are acceptable for your configuration. An example PKG_PATH would be: ftp://
                   1626: ftp.NetBSD.org/pub/NetBSD/packages/<OSVERSION>/<ARCH>/All;ftp://ftp.NetBSD.org/
                   1627: pub/NetBSD/packages/<OSVERSION>/<ARCH>/vulnerable Please note that semicolon
                   1628: (';') is a shell meta-character, so you'll probably have to quote it.
                   1629: 
                   1630: After you've installed packages, be sure to have /usr/pkg/bin and /usr/pkg/sbin
                   1631: in your PATH so you can actually start the just installed program.
                   1632: 
                   1633: 4.1.3. Deinstalling packages
                   1634: 
                   1635: To deinstall a package, it does not matter whether it was installed from source
                   1636: code or from a binary package. The pkg_delete command does not know it anyway.
                   1637: To delete a package, you can just run pkg_delete package-name. The package name
                   1638: can be given with or without version number. Wildcards can also be used to
                   1639: deinstall a set of packages, for example *emacs*. Be sure to include them in
                   1640: quotes, so that the shell does not expand them before pkg_delete sees them.
                   1641: 
                   1642: The -r option is very powerful: it removes all the packages that require the
                   1643: package in question and then removes the package itself. For example:
                   1644: 
                   1645: # pkg_delete -r jpeg
                   1646: 
                   1647: 
                   1648: will remove jpeg and all the packages that used it; this allows upgrading the
                   1649: jpeg package.
                   1650: 
                   1651: 4.1.4. Getting information about installed packages
                   1652: 
                   1653: The pkg_info shows information about installed packages or binary package
                   1654: files.
                   1655: 
                   1656: 4.1.5. Checking for security vulnerabilities in installed packages
                   1657: 
                   1658: The NetBSD Security-Officer and Packages Groups maintain a list of known
                   1659: security vulnerabilities to packages which are (or have been) included in
                   1660: pkgsrc. The list is available from the NetBSD FTP site at ftp://ftp.NetBSD.org/
                   1661: pub/pkgsrc/distfiles/vulnerabilities.
                   1662: 
                   1663: Through security/audit-packages, this list can be downloaded automatically, and
                   1664: a security audit of all packages installed on a system can take place.
                   1665: 
                   1666: There are two components to security/audit-packages. The first component,
                   1667: "download-vulnerability-list", is for downloading the list of vulnerabilities
                   1668: from the NetBSD FTP site. The second component, "audit-packages", checks to see
                   1669: if any of your installed packages are vulnerable. If a package is vulnerable,
                   1670: you will see output similar to the following:
                   1671: 
                   1672: Package samba-2.0.9 has a local-root-shell vulnerability, see
                   1673:     http://www.samba.org/samba/whatsnew/macroexploit.html
                   1674: 
                   1675: One can set up security/audit-packages to download the vulnerabilities file
                   1676: daily, and include a package audit in the daily security script. Details on
                   1677: this are located in the MESSAGE file for security/audit-packages.
                   1678: 
                   1679: 4.1.6. Finding if newer versions of your installed packages are in pkgsrc
                   1680: 
                   1681: Install pkgtools/pkglint and run lintpkgsrc with the "-i" argument to check if
                   1682: your packages are up-to-date, e.g.
                   1683: 
                   1684: % lintpkgsrc -i
                   1685: ...
                   1686: Version mismatch: 'tcsh' 6.09.00 vs 6.10.00
                   1687: 
                   1688: 
                   1689: You can then use make update to update the package on your system and rebuild
                   1690: any dependencies.
                   1691: 
                   1692: 4.1.7. Other administrative functions
                   1693: 
                   1694: The pkg_admin executes various administrative functions on the package system.
                   1695: 
                   1696: 4.1.8. A word of warning
                   1697: 
                   1698: Please pay very careful attention to the warnings expressed in the pkg_add(1)
                   1699: manual page about the inherent dangers of installing binary packages which you
                   1700: did not create yourself, and the security holes that can be introduced onto
                   1701: your system by indiscriminate adding of such files.
                   1702: 
                   1703: The same warning of course applies to every package you install from source
                   1704: when you haven't completely read and understood the source code of the package,
                   1705: the compiler that is used to build the package and all the other tools that are
                   1706: involved.
                   1707: 
                   1708: 4.2. Building packages from source
                   1709: 
                   1710: After obtaining pkgsrc, the pkgsrc directory now contains a set of packages,
                   1711: organized into categories. You can browse the online index of packages, or run
                   1712: make readme from the pkgsrc directory to build local README.html files for all
                   1713: packages, viewable with any web browser such as www/lynx or www/firefox.
                   1714: 
                   1715: The default prefix for installed packages is /usr/pkg. If you wish to change
                   1716: this, you should do so by setting LOCALBASE in mk.conf. You should not try to
                   1717: use multiple different LOCALBASE definitions on the same system (inside a
                   1718: chroot is an exception).
                   1719: 
                   1720: The rest of this chapter assumes that the package is already in pkgsrc. If it
                   1721: is not, see Part II, "The pkgsrc developer's guide" for instructions how to
                   1722: create your own packages.
                   1723: 
                   1724: 4.2.1. Requirements
                   1725: 
                   1726: To build packages from source, you need a working C compiler. On NetBSD, you
                   1727: need to install the "comp" and the "text" distribution sets. If you want to
                   1728: build X11-related packages, the "xbase" and "xcomp" distribution sets are
                   1729: required, too.
                   1730: 
                   1731: 4.2.2. Fetching distfiles
                   1732: 
                   1733: The first step for building a package is downloading the distfiles (i.e. the
                   1734: unmodified source). If they have not yet been downloaded, pkgsrc will fetch
                   1735: them automatically.
                   1736: 
                   1737: If you have all files that you need in the distfiles directory, you don't need
                   1738: to connect. If the distfiles are on CD-ROM, you can mount the CD-ROM on /cdrom
                   1739: and add:
                   1740: 
                   1741: DISTDIR=/cdrom/pkgsrc/distfiles
                   1742: 
                   1743: to your mk.conf.
                   1744: 
                   1745: By default a list of distribution sites will be randomly intermixed to prevent
                   1746: huge load on servers which holding popular packages (for example,
                   1747: SourceForge.net mirrors). Thus, every time when you need to fetch yet another
                   1748: distfile all the mirrors will be tried in new (random) order. You can turn this
                   1749: feature off by setting MASTER_SORT_RANDOM=NO (for PKG_DEVELOPERs it's already
                   1750: disabled).
                   1751: 
                   1752: You can overwrite some of the major distribution sites to fit to sites that are
                   1753: close to your own. By setting one or two variables you can modify the order in
                   1754: which the master sites are accessed. MASTER_SORT contains a whitespace
                   1755: delimited list of domain suffixes. MASTER_SORT_REGEX is even more flexible, it
                   1756: contains a whitespace delimited list of regular expressions. It has higher
                   1757: priority than MASTER_SORT. Have a look at pkgsrc/mk/defaults/mk.conf to find
                   1758: some examples. This may save some of your bandwidth and time.
                   1759: 
                   1760: You can change these settings either in your shell's environment, or, if you
1.4       rillig   1761: want to keep the settings, by editing the mk.conf file, and adding the
1.1       dsieger  1762: definitions there.
                   1763: 
                   1764: If a package depends on many other packages (such as meta-pkgs/kde3), the build
                   1765: process may alternate between periods of downloading source, and compiling. To
                   1766: ensure you have all the source downloaded initially you can run the command:
                   1767: 
                   1768: % make fetch-list | sh
                   1769: 
                   1770: which will output and run a set of shell commands to fetch the necessary files
                   1771: into the distfiles directory. You can also choose to download the files
                   1772: manually.
                   1773: 
                   1774: 4.2.3. How to build and install
                   1775: 
                   1776: Once the software has downloaded, any patches will be applied, then it will be
                   1777: compiled for you. This may take some time depending on your computer, and how
                   1778: many other packages the software depends on and their compile time.
                   1779: 
                   1780: Note
                   1781: 
                   1782: If using bootstrap or pkgsrc on a non-NetBSD system, use the pkgsrc bmake
                   1783: command instead of "make" in the examples in this guide.
                   1784: 
                   1785: For example, type
                   1786: 
                   1787: % cd misc/figlet
                   1788: % make
                   1789: 
                   1790: 
                   1791: at the shell prompt to build the various components of the package.
                   1792: 
                   1793: The next stage is to actually install the newly compiled program onto your
                   1794: system. Do this by entering:
                   1795: 
                   1796: % make install
                   1797: 
                   1798: 
                   1799: while you are still in the directory for whatever package you are installing.
                   1800: 
                   1801: Installing the package on your system may require you to be root. However,
                   1802: pkgsrc has a just-in-time-su feature, which allows you to only become root for
                   1803: the actual installation step.
                   1804: 
                   1805: That's it, the software should now be installed and setup for use. You can now
                   1806: enter:
                   1807: 
                   1808: % make clean
                   1809: 
                   1810: 
                   1811: to remove the compiled files in the work directory, as you shouldn't need them
                   1812: any more. If other packages were also added to your system (dependencies) to
                   1813: allow your program to compile, you can tidy these up also with the command:
                   1814: 
                   1815: % make clean-depends
                   1816: 
                   1817: 
                   1818: Taking the figlet utility as an example, we can install it on our system by
                   1819: building as shown in Appendix B, Build logs.
                   1820: 
                   1821: The program is installed under the default root of the packages tree - /usr/
                   1822: pkg. Should this not conform to your tastes, set the LOCALBASE variable in your
                   1823: environment, and it will use that value as the root of your packages tree. So,
                   1824: to use /usr/local, set LOCALBASE=/usr/local in your environment. Please note
                   1825: that you should use a directory which is dedicated to packages and not shared
                   1826: with other programs (i.e., do not try and use LOCALBASE=/usr). Also, you should
                   1827: not try to add any of your own files or directories (such as src/, obj/, or
                   1828: pkgsrc/) below the LOCALBASE tree. This is to prevent possible conflicts
                   1829: between programs and other files installed by the package system and whatever
                   1830: else may have been installed there.
                   1831: 
1.4       rillig   1832: Some packages look in mk.conf to alter some configuration options at build
1.1       dsieger  1833: time. Have a look at pkgsrc/mk/defaults/mk.conf to get an overview of what will
                   1834: be set there by default. Environment variables such as LOCALBASE can be set in
1.4       rillig   1835: mk.conf to save having to remember to set them each time you want to use
1.1       dsieger  1836: pkgsrc.
                   1837: 
                   1838: Occasionally, people want to "look under the covers" to see what is going on
                   1839: when a package is building or being installed. This may be for debugging
                   1840: purposes, or out of simple curiosity. A number of utility values have been
                   1841: added to help with this.
                   1842: 
                   1843:  1. If you invoke the make(1) command with PKG_DEBUG_LEVEL=2, then a huge
                   1844:     amount of information will be displayed. For example,
                   1845: 
                   1846:     make patch PKG_DEBUG_LEVEL=2
                   1847: 
                   1848:     will show all the commands that are invoked, up to and including the
                   1849:     "patch" stage.
                   1850: 
                   1851:  2. If you want to know the value of a certain make(1) definition, then the
                   1852:     VARNAME definition should be used, in conjunction with the show-var target.
                   1853:     e.g. to show the expansion of the make(1) variable LOCALBASE:
                   1854: 
                   1855:     % make show-var VARNAME=LOCALBASE
                   1856:     /usr/pkg
                   1857:     %
                   1858: 
                   1859: 
                   1860: If you want to install a binary package that you've either created yourself
                   1861: (see next section), that you put into pkgsrc/packages manually or that is
                   1862: located on a remote FTP server, you can use the "bin-install" target. This
                   1863: target will install a binary package - if available - via pkg_add(1), else do a
                   1864: make package. The list of remote FTP sites searched is kept in the variable
                   1865: BINPKG_SITES, which defaults to ftp.NetBSD.org. Any flags that should be added
                   1866: to pkg_add(1) can be put into BIN_INSTALL_FLAGS. See pkgsrc/mk/defaults/mk.conf
                   1867: for more details.
                   1868: 
                   1869: A final word of warning: If you set up a system that has a non-standard setting
                   1870: for LOCALBASE, be sure to set that before any packages are installed, as you
                   1871: cannot use several directories for the same purpose. Doing so will result in
                   1872: pkgsrc not being able to properly detect your installed packages, and fail
                   1873: miserably. Note also that precompiled binary packages are usually built with
                   1874: the default LOCALBASE of /usr/pkg, and that you should not install any if you
                   1875: use a non-standard LOCALBASE.
                   1876: 
                   1877: Chapter 5. Configuring pkgsrc
                   1878: 
                   1879: Table of Contents
                   1880: 
                   1881: 5.1. General configuration
                   1882: 5.2. Variables affecting the build process
1.4       rillig   1883: 5.3. Variables affecting the installion process
                   1884: 5.4. Selecting and configuring the compiler
1.1       dsieger  1885: 
1.4       rillig   1886:     5.4.1. Selecting the compiler
                   1887:     5.4.2. Additional flags to the compiler (CFLAGS)
                   1888:     5.4.3. Additional flags to the linker (LDFLAGS)
1.1       dsieger  1889: 
1.4       rillig   1890: 5.5. Developer/advanced settings
                   1891: 5.6. Selecting Build Options
1.1       dsieger  1892: 
                   1893: The whole pkgsrc system is configured in a single file, usually called mk.conf.
                   1894: In which directory pkgsrc looks for that file depends on the installation. On
                   1895: NetBSD, when you use make(1) from the base system, it is in the directory /etc
                   1896: /. In all other cases the default location is ${PREFIX}/etc/, depending on
                   1897: where you told the bootstrap program to install the binary packages.
                   1898: 
                   1899: During the bootstrap, an example configuration file is created. To use that,
                   1900: you have to create the directory ${PREFIX}/etc and copy the example file there.
                   1901: 
                   1902: The format of the configuration file is that of the usual BSD-style Makefiles.
                   1903: The whole pkgsrc configuration is done by setting variables in this file. Note
                   1904: that you can define all kinds of variables, and no special error checking (for
                   1905: example for spelling mistakes) takes place, so you have to try it out to see if
                   1906: it works.
                   1907: 
                   1908: 5.1. General configuration
                   1909: 
                   1910: In this section, you can find some variables that apply to all pkgsrc packages.
                   1911: A complete list of the variables that can be configured by the user is
                   1912: available in mk/defaults/mk.conf, together with some comments that describe
                   1913: each variable's intent.
                   1914: 
                   1915:   * LOCALBASE: Where packages will be installed. The default is /usr/pkg. Do
                   1916:     not mix binary packages with different LOCALBASEs!
                   1917: 
                   1918:   * CROSSBASE: Where "cross" category packages will be installed. The default
                   1919:     is ${LOCALBASE}/cross.
                   1920: 
                   1921:   * X11BASE: Where X11 is installed on the system. The default is /usr/X11R6.
                   1922: 
                   1923:   * DISTDIR: Where to store the downloaded copies of the original source
                   1924:     distributions used for building pkgsrc packages. The default is $
                   1925:     {PKGSRCDIR}/distfiles.
                   1926: 
                   1927:   * PKG_DBDIR: Where the database about installed packages is stored. The
                   1928:     default is /var/db/pkg.
                   1929: 
                   1930:   * MASTER_SITE_OVERRIDE: If set, override the packages' MASTER_SITES with this
                   1931:     value.
                   1932: 
                   1933:   * MASTER_SITE_BACKUP: Backup location(s) for distribution files and patch
                   1934:     files if not found locally or in ${MASTER_SITES} or ${PATCH_SITES}
                   1935:     respectively. The defaults are ftp://ftp.NetBSD.org/pub/NetBSD/packages/
                   1936:     distfiles/${DIST_SUBDIR}/ and ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/$
                   1937:     {DIST_SUBDIR}/.
                   1938: 
                   1939:   * BINPKG_SITES: List of sites carrying binary pkgs. rel and arch are replaced
                   1940:     with OS release ("2.0", etc.) and architecture ("mipsel", etc.).
                   1941: 
                   1942:   * ACCEPTABLE_LICENSES: List of acceptable licenses. Whenever you try to build
                   1943:     a package whose license is not in this list, you will get an error message
                   1944:     that includes instructions on how to change this variable.
                   1945: 
                   1946: 5.2. Variables affecting the build process
                   1947: 
                   1948: XXX
                   1949: 
                   1950:   * PACKAGES: The top level directory for the binary packages. The default is $
                   1951:     {PKGSRCDIR}/packages.
                   1952: 
                   1953:   * WRKOBJDIR: The top level directory where, if defined, the separate working
                   1954:     directories will get created, and symbolically linked to from ${WRKDIR}
                   1955:     (see below). This is useful for building packages on several architectures,
                   1956:     then ${PKGSRCDIR} can be NFS-mounted while ${WRKOBJDIR} is local to every
                   1957:     architecture. (It should be noted that PKGSRCDIR should not be set by the
                   1958:     user ? it is an internal definition which refers to the root of the pkgsrc
                   1959:     tree. It is possible to have many pkgsrc tree instances.)
                   1960: 
                   1961:   * LOCALPATCHES: Directory for local patches that aren't part of pkgsrc. See
                   1962:     Section 10.3, "patches/*" for more information.
                   1963: 
                   1964:   * PKGMAKECONF: Location of the mk.conf file used by a package's BSD-style
                   1965:     Makefile. If this is not set, MAKECONF is set to /dev/null to avoid picking
                   1966:     up settings used by builds in /usr/src.
                   1967: 
                   1968:   * DEPENDS_TARGET: By default, dependencies are only installed, and no binary
                   1969:     package is created for them. You can set this variable to package to
                   1970:     automatically create binary packages after installing dependencies.
                   1971: 
1.4       rillig   1972: 5.3. Variables affecting the installion process
1.1       dsieger  1973: 
1.4       rillig   1974: A growing number of packages support installation into a subdirectory of
                   1975: WRKDIR. This allows a package to be built, before the actual filesystem is
                   1976: touched. DESTDIR support exists in two variations:
                   1977: 
                   1978:   * Basic DESTDIR support means that the package installation and packaging is
                   1979:     still run as root.
                   1980: 
                   1981:   * Full DESTDIR support can run the complete build, installation and packaging
                   1982:     as normal user. Root privileges are only needed to add packages.
                   1983: 
                   1984: To use the DESTDIR support, set either USE_DESTDIR=yes to use the basic support
                   1985: for packages that offer it or USE_DESTDIR=full to get the full support with
                   1986: fallback to basic support. USE_DESTDIR=full needs pkgtools/pkg_install version
                   1987: 20070802 (or newer). It might become the default DESTDIR support later.
                   1988: 
                   1989: DESTDIR support changes the behaviour of various targets slightly. To install a
                   1990: package after building it, use package-install. package and install don't do
                   1991: that any longer. package-install can be used as DEPENDS_TARGET. bin-install
                   1992: will ask for the root password to install the package and fail, package-install
                   1993: will ask again.
                   1994: 
                   1995: With basic DESTDIR support, make clean needs to be run as root.
                   1996: 
                   1997: 5.4. Selecting and configuring the compiler
                   1998: 
                   1999: 5.4.1. Selecting the compiler
1.1       dsieger  2000: 
                   2001: By default, pkgsrc will use GCC to build packages. This may be overridden by
                   2002: setting the following variables in /etc/mk.conf:
                   2003: 
                   2004: PKGSRC_COMPILER:
                   2005: 
                   2006:     This is a list of values specifying the chain of compilers to invoke when
                   2007:     building packages. Valid values are:
                   2008: 
                   2009:       * distcc: distributed C/C++ (chainable)
                   2010: 
                   2011:       * ccache: compiler cache (chainable)
                   2012: 
                   2013:       * gcc: GNU C/C++ Compiler
                   2014: 
                   2015:       * mipspro: Silicon Graphics, Inc. MIPSpro (n32/n64)
                   2016: 
                   2017:       * mipspro: Silicon Graphics, Inc. MIPSpro (o32)
                   2018: 
                   2019:       * sunpro: Sun Microsystems, Inc. WorkShip/Forte/Sun ONE Studio
                   2020: 
                   2021:     The default is "gcc". You can use ccache and/or distcc with an appropriate
                   2022:     PKGSRC_COMPILER setting, e.g. "ccache gcc". This variable should always be
                   2023:     terminated with a value for a real compiler. Note that only one real
                   2024:     compiler should be listed (e.g. "sunpro gcc" is not allowed).
                   2025: 
                   2026: GCC_REQD:
                   2027: 
                   2028:     This specifies the minimum version of GCC to use when building packages. If
                   2029:     the system GCC doesn't satisfy this requirement, then pkgsrc will build and
                   2030:     install one of the GCC packages to use instead.
                   2031: 
1.4       rillig   2032: 5.4.2. Additional flags to the compiler (CFLAGS)
1.1       dsieger  2033: 
                   2034: If you wish to set the CFLAGS variable, please make sure to use the += operator
                   2035: instead of the = operator:
                   2036: 
                   2037: CFLAGS+=        -your -flags
                   2038: 
                   2039: Using CFLAGS= (i.e. without the "+") may lead to problems with packages that
                   2040: need to add their own flags. Also, you may want to take a look at the devel/
                   2041: cpuflags package if you're interested in optimization for the current CPU.
                   2042: 
1.4       rillig   2043: 5.4.3. Additional flags to the linker (LDFLAGS)
1.1       dsieger  2044: 
                   2045: If you want to pass flags to the linker, both in the configure step and the
                   2046: build step, you can do this in two ways. Either set LDFLAGS or LIBS. The
                   2047: difference between the two is that LIBS will be appended to the command line,
                   2048: while LDFLAGS come earlier. LDFLAGS is pre-loaded with rpath settings for ELF
                   2049: machines depending on the setting of USE_IMAKE or the inclusion of mk/
                   2050: x11.buildlink3.mk. As with CFLAGS, if you do not wish to override these
                   2051: settings, use the += operator:
                   2052: 
                   2053: LDFLAGS+=        -your -linkerflags
                   2054: 
1.4       rillig   2055: 5.5. Developer/advanced settings
1.1       dsieger  2056: 
                   2057: XXX
                   2058: 
                   2059:   * PKG_DEVELOPER: Run some sanity checks that package developers want:
                   2060: 
                   2061:       o make sure patches apply with zero fuzz
                   2062: 
                   2063:       o run check-shlibs to see that all binaries will find their shared libs.
                   2064: 
                   2065:   * PKG_DEBUG_LEVEL: The level of debugging output which is displayed whilst
                   2066:     making and installing the package. The default value for this is 0, which
                   2067:     will not display the commands as they are executed (normal, default, quiet
                   2068:     operation); the value 1 will display all shell commands before their
                   2069:     invocation, and the value 2 will display both the shell commands before
                   2070:     their invocation, and their actual execution progress with set -x will be
                   2071:     displayed.
                   2072: 
1.4       rillig   2073: 5.6. Selecting Build Options
1.1       dsieger  2074: 
                   2075: Some packages have build time options, usually to select between different
                   2076: dependencies, enable optional support for big dependencies or enable
                   2077: experimental features.
                   2078: 
                   2079: To see which options, if any, a package supports, and which options are
                   2080: mutually exclusive, run make show-options, for example:
                   2081: 
                   2082:     The following options are supported by this package:
                   2083:         ssl      Enable SSL support.
                   2084:     Exactly one of the following gecko options is required:
                   2085:         firefox  Use firefox as gecko rendering engine.
                   2086:         mozilla  Use mozilla as gecko rendering engine.
                   2087:     At most one of the following database options may be selected:
                   2088:         mysql    Enable support for MySQL database.
                   2089:         pgsql    Enable support for PostgreSQL database.
                   2090: 
                   2091:     These options are enabled by default: firefox
                   2092:     These options are currently enabled: mozilla ssl
                   2093: 
1.4       rillig   2094: The following variables can be defined in mk.conf to select which options to
                   2095: enable for a package: PKG_DEFAULT_OPTIONS, which can be used to select or
1.1       dsieger  2096: disable options for all packages that support them, and PKG_OPTIONS.pkgbase,
                   2097: which can be used to select or disable options specifically for package pkgbase
                   2098: . Options listed in these variables are selected, options preceded by "-" are
                   2099: disabled. A few examples:
                   2100: 
1.4       rillig   2101: $ grep "PKG.*OPTION" mk.conf
1.1       dsieger  2102: PKG_DEFAULT_OPTIONS=    -arts -dvdread -esound
                   2103: PKG_OPTIONS.kdebase=    debug -sasl
                   2104: PKG_OPTIONS.apache=     suexec
                   2105: 
                   2106: The following settings are consulted in the order given, and the last setting
                   2107: that selects or disables an option is used:
                   2108: 
                   2109:  1. the default options as suggested by the package maintainer
                   2110: 
                   2111:  2. the options implied by the settings of legacy variables (see below)
                   2112: 
                   2113:  3. PKG_DEFAULT_OPTIONS
                   2114: 
                   2115:  4. PKG_OPTIONS.pkgbase
                   2116: 
                   2117: For groups of mutually exclusive options, the last option selected is used, all
                   2118: others are automatically disabled. If an option of the group is explicitly
                   2119: disabled, the previously selected option, if any, is used. It is an error if no
                   2120: option from a required group of options is selected, and building the package
                   2121: will fail.
                   2122: 
                   2123: Before the options framework was introduced, build options were selected by
1.4       rillig   2124: setting a variable (often named USE_FOO) in mk.conf for each option. To ease
                   2125: transition to the options framework for the user, these legacy variables are
                   2126: converted to the appropriate options setting (PKG_OPTIONS.pkgbase)
                   2127: automatically. A warning is issued to prompt the user to update mk.conf to use
                   2128: the options framework directly. Support for the legacy variables will be
1.1       dsieger  2129: removed eventually.
                   2130: 
                   2131: Chapter 6. Creating binary packages
                   2132: 
                   2133: Table of Contents
                   2134: 
                   2135: 6.1. Building a single binary package
                   2136: 6.2. Settings for creation of binary packages
                   2137: 6.3. Doing a bulk build of all packages
                   2138: 
                   2139:     6.3.1. Configuration
                   2140:     6.3.2. Other environmental considerations
                   2141:     6.3.3. Operation
                   2142:     6.3.4. What it does
                   2143:     6.3.5. Disk space requirements
                   2144:     6.3.6. Setting up a sandbox for chrooted builds
                   2145:     6.3.7. Building a partial set of packages
                   2146:     6.3.8. Uploading results of a bulk build
                   2147: 
                   2148: 6.4. Creating a multiple CD-ROM packages collection
                   2149: 
                   2150:     6.4.1. Example of cdpack
                   2151: 
                   2152: 6.1. Building a single binary package
                   2153: 
                   2154: Once you have built and installed a package, you can create a binary package
                   2155: which can be installed on another system with pkg_add(1). This saves having to
                   2156: build the same package on a group of hosts and wasting CPU time. It also
                   2157: provides a simple means for others to install your package, should you
                   2158: distribute it.
                   2159: 
                   2160: To create a binary package, change into the appropriate directory in pkgsrc,
                   2161: and run make package:
                   2162: 
                   2163: # cd misc/figlet
                   2164: # make package
                   2165: 
                   2166: 
                   2167: This will build and install your package (if not already done), and then build
                   2168: a binary package from what was installed. You can then use the pkg_* tools to
                   2169: manipulate it. Binary packages are created by default in /usr/pkgsrc/packages,
                   2170: in the form of a gzipped tar file. See Section B.2, "Packaging figlet" for a
                   2171: continuation of the above misc/figlet example.
                   2172: 
                   2173: See Chapter 20, Submitting and Committing for information on how to submit such
                   2174: a binary package.
                   2175: 
                   2176: 6.2. Settings for creation of binary packages
                   2177: 
                   2178: See Section 16.17, "Other helpful targets".
                   2179: 
                   2180: 6.3. Doing a bulk build of all packages
                   2181: 
                   2182: If you want to get a full set of precompiled binary packages, this section
                   2183: describes how to get them. Beware that the bulk build will remove all currently
                   2184: installed packages from your system!
                   2185: 
                   2186: Having an FTP server configured either on the machine doing the bulk builds or
                   2187: on a nearby NFS server can help to make the packages available to other
                   2188: machines that can then save time by installing only the binary packages. See
                   2189: ftpd(8) for more information. If you use a remote NFS server's storage, be sure
                   2190: to not actually compile on NFS storage, as this slows things down a lot.
                   2191: 
                   2192: 6.3.1. Configuration
                   2193: 
                   2194: 6.3.1.1. build.conf
                   2195: 
                   2196: The build.conf file is the main configuration file for bulk builds. You can
                   2197: configure how your copy of pkgsrc is kept up to date, how the distfiles are
                   2198: downloaded, how the packages are built and how the report is generated. You can
                   2199: find an annotated example file in pkgsrc/mk/bulk/build.conf-example. To use it,
                   2200: copy build.conf-example to build.conf and edit it, following the comments in
                   2201: that file.
                   2202: 
1.4       rillig   2203: 6.3.1.2. mk.conf
1.1       dsieger  2204: 
1.4       rillig   2205: You may want to set variables in mk.conf. Look at pkgsrc/mk/defaults/mk.conf
                   2206: for details of the default settings. You will want to ensure that
1.1       dsieger  2207: ACCEPTABLE_LICENSES meet your local policy. As used in this example,
1.4       rillig   2208: _ACCEPTABLE=yes completely bypasses the license check.
1.1       dsieger  2209: 
                   2210: PACKAGES?=      ${_PKGSRCDIR}/packages/${MACHINE_ARCH}
                   2211: WRKOBJDIR?=     /usr/tmp/pkgsrc   # build here instead of in pkgsrc
                   2212: BSDSRCDIR=      /usr/src
                   2213: BSDXSRCDIR=     /usr/xsrc         # for x11/xservers
                   2214: OBJHOSTNAME?=   yes               # use work.`hostname`
                   2215: FAILOVER_FETCH= yes               # insist on the correct checksum
                   2216: PKG_DEVELOPER?= yes
                   2217: _ACCEPTABLE=    yes
                   2218: 
                   2219: Some options that are especially useful for bulk builds can be found at the top
                   2220: lines of the file mk/bulk/bsd.bulk-pkg.mk. The most useful options of these are
                   2221: briefly described here.
                   2222: 
                   2223:   * If you are on a slow machine, you may want to set USE_BULK_BROKEN_CHECK to
                   2224:     "no".
                   2225: 
                   2226:   * If you are doing bulk builds from a read-only copy of pkgsrc, you have to
                   2227:     set BULKFILESDIR to the directory where all log files are created.
                   2228:     Otherwise the log files are created in the pkgsrc directory.
                   2229: 
                   2230:   * Another important variable is BULK_PREREQ, which is a list of packages that
                   2231:     should be always available while building other packages.
                   2232: 
                   2233: Some other options are scattered in the pkgsrc infrastructure:
                   2234: 
                   2235:   * ALLOW_VULNERABLE_PACKAGES should be set to yes. The purpose of the bulk
                   2236:     builds is creating binary packages, no matter if they are vulnerable or
                   2237:     not. When uploading the packages to a public server, the vulnerable
                   2238:     packages will be put into a directory of their own. Leaving this variable
                   2239:     unset would prevent the bulk build system from even trying to build them,
                   2240:     so possible building errors would not show up.
                   2241: 
                   2242:   * CHECK_FILES (pkgsrc/mk/check/check-files.mk) can be set to "yes" to check
                   2243:     that the installed set of files matches the PLIST.
                   2244: 
                   2245:   * CHECK_INTERPRETER (pkgsrc/mk/check/check-interpreter.mk) can be set to
                   2246:     "yes" to check that the installed "#!"-scripts will find their interpreter.
                   2247: 
                   2248:   * PKGSRC_RUN_TEST can be set to "yes" to run each package's self-test before
                   2249:     installing it. Note that some packages make heavy use of "good" random
                   2250:     numbers, so you need to assure that the machine on which you are doing the
                   2251:     bulk builds is not completely idle. Otherwise some test programs will seem
                   2252:     to hang, while they are just waiting for new random data to be available.
                   2253: 
                   2254: 6.3.1.3. pre-build.local
                   2255: 
                   2256: It is possible to configure the bulk build to perform certain site-specific
                   2257: tasks at the end of the pre-build stage. If the file pre-build.local exists in
                   2258: /usr/pkgsrc/mk/bulk, it will be executed (as a sh(1) script) at the end of the
                   2259: usual pre-build stage. An example use of pre-build.local is to have the line:
                   2260: 
                   2261: echo "I do not have enough disk space to build this pig." \
                   2262:         > misc/openoffice/$BROKENF
                   2263: 
                   2264: to prevent the system from trying to build a particular package which requires
                   2265: nearly 3 GB of disk space.
                   2266: 
                   2267: 6.3.2. Other environmental considerations
                   2268: 
                   2269: As /usr/pkg will be completely deleted at the start of bulk builds, make sure
                   2270: your login shell is placed somewhere else. Either drop it into /usr/local/bin
                   2271: (and adjust your login shell in the passwd file), or (re-)install it via
                   2272: pkg_add(1) from /etc/rc.local, so you can login after a reboot (remember that
                   2273: your current process won't die if the package is removed, you just can't start
                   2274: any new instances of the shell any more). Also, if you use NetBSD earlier than
                   2275: 1.5, or you still want to use the pkgsrc version of ssh for some reason, be
                   2276: sure to install ssh before starting it from rc.local:
                   2277: 
                   2278: (cd /usr/pkgsrc/security/ssh && make bulk-install)
                   2279: if [ -f /usr/pkg/etc/rc.d/sshd ]; then
                   2280:   /usr/pkg/etc/rc.d/sshd
                   2281: fi
                   2282: 
                   2283: Not doing so will result in you being not able to log in via ssh after the bulk
                   2284: build is finished or if the machine gets rebooted or crashes. You have been
                   2285: warned! :)
                   2286: 
                   2287: 6.3.3. Operation
                   2288: 
                   2289: Make sure you don't need any of the packages still installed.
                   2290: 
                   2291: Warning
                   2292: 
                   2293: During the bulk build, all packages, their configuration files and some more
                   2294: files from /var, /home and possibly other locations will be removed! So don't
                   2295: run a bulk build with privileges that might harm your system.
                   2296: 
                   2297: Be sure to remove all other things that might interfere with builds, like some
                   2298: libs installed in /usr/local, etc. then become root and type:
                   2299: 
                   2300: # cd /usr/pkgsrc
                   2301: # sh mk/bulk/build
                   2302: 
                   2303: 
                   2304: If for some reason your last build didn't complete (power failure, system
                   2305: panic, ...), you can continue it by running:
                   2306: 
                   2307: # sh mk/bulk/build restart
                   2308: 
                   2309: At the end of the bulk build, you will get a summary via mail, and find build
                   2310: logs in the directory specified by FTP in the build.conf file.
                   2311: 
                   2312: 6.3.4. What it does
                   2313: 
                   2314: The bulk builds consist of three steps:
                   2315: 
                   2316: 1. pre-build
                   2317: 
                   2318:     The script updates your pkgsrc tree via (anon)cvs, then cleans out any
                   2319:     broken distfiles, and removes all packages installed.
                   2320: 
                   2321: 2. the bulk build
                   2322: 
                   2323:     This is basically "make bulk-package" with an optimised order in which
                   2324:     packages will be built. Packages that don't require other packages will be
                   2325:     built first, and packages with many dependencies will be built later.
                   2326: 
                   2327: 3. post-build
                   2328: 
                   2329:     Generates a report that's placed in the directory specified in the
                   2330:     build.conf file named broken.html, a short version of that report will also
                   2331:     be mailed to the build's admin.
                   2332: 
                   2333: During the build, a list of broken packages will be compiled in /usr/pkgsrc
                   2334: /.broken (or .../.broken.${MACHINE} if OBJMACHINE is set), individual build
                   2335: logs of broken builds can be found in the package's directory. These files are
                   2336: used by the bulk-targets to mark broken builds to not waste time trying to
                   2337: rebuild them, and they can be used to debug these broken package builds later.
                   2338: 
                   2339: 6.3.5. Disk space requirements
                   2340: 
                   2341: Currently, roughly the following requirements are valid for NetBSD 2.0/i386:
                   2342: 
                   2343:   * 10 GB - distfiles (NFS ok)
                   2344: 
                   2345:   * 8 GB - full set of all binaries (NFS ok)
                   2346: 
                   2347:   * 5 GB - temp space for compiling (local disk recommended)
                   2348: 
                   2349: Note that all pkgs will be de-installed as soon as they are turned into a
                   2350: binary package, and that sources are removed, so there is no excessively huge
                   2351: demand to disk space. Afterwards, if the package is needed again, it will be
                   2352: installed via pkg_add(1) instead of building again, so there are no cycles
                   2353: wasted by recompiling.
                   2354: 
                   2355: 6.3.6. Setting up a sandbox for chrooted builds
                   2356: 
                   2357: If you don't want all the packages nuked from a machine (rendering it useless
                   2358: for anything but pkg compiling), there is the possibility of doing the package
                   2359: bulk build inside a chroot environment.
                   2360: 
                   2361: The first step is to set up a chroot sandbox, e.g. /usr/sandbox. This can be
                   2362: done by using null mounts, or manually.
                   2363: 
                   2364: There is a shell script called pkgsrc/mk/bulk/mksandbox which will set up the
                   2365: sandbox environment using null mounts. It will also create a script called
                   2366: sandbox in the root of the sandbox environment, which will allow the null
                   2367: mounts to be activated using the sandbox mount command and deactivated using
                   2368: the sandbox umount command.
                   2369: 
                   2370: To set up a sandbox environment by hand, after extracting all the sets from a
                   2371: NetBSD installation or doing a make distribution DESTDIR=/usr/sandbox in /usr/
                   2372: src/etc, be sure the following items are present and properly configured:
                   2373: 
                   2374:  1. Kernel
                   2375: 
                   2376:     # cp /netbsd /usr/sandbox
                   2377: 
                   2378:  2. /dev/*
                   2379: 
                   2380:     # cd /usr/sandbox/dev ; sh MAKEDEV all
                   2381: 
                   2382:  3. /etc/resolv.conf (for security/smtpd and mail):
                   2383: 
                   2384:     # cp /etc/resolv.conf /usr/sandbox/etc
                   2385: 
                   2386:  4. Working(!) mail config (hostname, sendmail.cf):
                   2387: 
                   2388:     # cp /etc/mail/sendmail.cf /usr/sandbox/etc/mail
                   2389: 
                   2390:  5. /etc/localtime (for security/smtpd):
                   2391: 
                   2392:     # ln -sf /usr/share/zoneinfo/UTC /usr/sandbox/etc/localtime
                   2393: 
                   2394:  6. /usr/src (system sources, e. g. for sysutils/aperture):
                   2395: 
                   2396:     # ln -s ../disk1/cvs .
                   2397:               # ln -s cvs/src-2.0 src
                   2398: 
                   2399:  7. Create /var/db/pkg (not part of default install):
                   2400: 
                   2401:     # mkdir /usr/sandbox/var/db/pkg
                   2402: 
                   2403:  8. Create /usr/pkg (not part of default install):
                   2404: 
                   2405:     # mkdir /usr/sandbox/usr/pkg
                   2406: 
                   2407:  9. Checkout pkgsrc via cvs into /usr/sandbox/usr/pkgsrc:
                   2408: 
                   2409:     # cd /usr/sandbox/usr
                   2410:     # cvs -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -d -P pkgsrc
                   2411: 
                   2412: 
                   2413:     Do not mount/link this to the copy of your pkgsrc tree you do development
                   2414:     in, as this will likely cause problems!
                   2415: 
                   2416: 10. Make /usr/sandbox/usr/pkgsrc/packages and .../distfiles point somewhere
                   2417:     appropriate. NFS- and/or nullfs-mounts may come in handy!
                   2418: 
1.4       rillig   2419: 11. Edit mk.conf, see Section 6.3.1.2, "mk.conf".
1.1       dsieger  2420: 
                   2421: 12. Adjust mk/bulk/build.conf to suit your needs.
                   2422: 
                   2423: When the chroot sandbox is set up, you can start the build with the following
                   2424: steps:
                   2425: 
                   2426: # cd /usr/sandbox/usr/pkgsrc
                   2427: # sh mk/bulk/do-sandbox-build
                   2428: 
                   2429: 
                   2430: This will just jump inside the sandbox and start building. At the end of the
                   2431: build, mail will be sent with the results of the build. Created binary pkgs
                   2432: will be in /usr/sandbox/usr/pkgsrc/packages (wherever that points/mounts to/
                   2433: from).
                   2434: 
                   2435: 6.3.7. Building a partial set of packages
                   2436: 
                   2437: In addition to building a complete set of all packages in pkgsrc, the pkgsrc/mk
                   2438: /bulk/build script may be used to build a subset of the packages contained in
1.4       rillig   2439: pkgsrc. By setting SPECIFIC_PKGS in mk.conf, the variables
1.1       dsieger  2440: 
                   2441:   * SITE_SPECIFIC_PKGS
                   2442: 
                   2443:   * HOST_SPECIFIC_PKGS
                   2444: 
                   2445:   * GROUP_SPECIFIC_PKGS
                   2446: 
                   2447:   * USER_SPECIFIC_PKGS
                   2448: 
                   2449: will define the set of packages which should be built. The bulk build code will
                   2450: also include any packages which are needed as dependencies for the explicitly
                   2451: listed packages.
                   2452: 
                   2453: One use of this is to do a bulk build with SPECIFIC_PKGS in a chroot sandbox
                   2454: periodically to have a complete set of the binary packages needed for your site
                   2455: available without the overhead of building extra packages that are not needed.
                   2456: 
                   2457: 6.3.8. Uploading results of a bulk build
                   2458: 
                   2459: This section describes how pkgsrc developers can upload binary pkgs built by
                   2460: bulk builds to ftp.NetBSD.org.
                   2461: 
                   2462: If you would like to automatically create checksum files for the binary
                   2463: packages you intend to upload, remember to set MKSUMS=yes in your mk/bulk/
                   2464: build.conf.
                   2465: 
                   2466: If you would like to PGP sign the checksum files (highly recommended!),
                   2467: remember to set SIGN_AS=username@NetBSD.org in your mk/bulk/build.conf. This
                   2468: will prompt you for your GPG password to sign the files before uploading
                   2469: everything.
                   2470: 
                   2471: Then, make sure that you have RSYNC_DST set properly in your mk/bulk/build.conf
                   2472: file, i.e. adjust it to something like one of the following:
                   2473: 
                   2474: RSYNC_DST=ftp.NetBSD.org:/pub/NetBSD/packages/packages-200xQy/NetBSD-a.b.c/arch/upload
                   2475: 
                   2476: Please use appropriate values for "packages-200xQy", "NetBSD-a.b.c" and "arch"
                   2477: here. If your login on ftp.NetBSD.org is different from your local login, write
                   2478: your login directly into the variable, e.g. my local account is "feyrer", but
                   2479: for my login "hubertf", I use:
                   2480: 
                   2481: RSYNC_DST=hubertf@ftp.NetBSD.org:/pub/NetBSD/packages/packages-200xQy/NetBSD-a.b.c/arch/upload
                   2482: 
                   2483: A separate upload directory is used here to allow "closing" the directory
                   2484: during upload. To do so, run the following command on ftp.NetBSD.org next:
                   2485: 
                   2486: nbftp% mkdir -p -m 750 /pub/NetBSD/packages/packages-200xQy/NetBSD-a.b.c/arch/upload
                   2487: 
                   2488: Please note that /pub/NetBSD/packages is only appropriate for packages for the
                   2489: NetBSD operating system. Binary packages for other operating systems should go
                   2490: into /pub/pkgsrc.
                   2491: 
                   2492: Before uploading the binary pkgs, ssh authentication needs to be set up. This
                   2493: example shows how to set up temporary keys for the root account inside the
                   2494: sandbox (assuming that no keys should be present there usually):
                   2495: 
                   2496: # chroot /usr/sandbox
                   2497: chroot-# rm $HOME/.ssh/id-dsa*
                   2498: chroot-# ssh-keygen -t dsa
                   2499: chroot-# cat $HOME/.ssh/id-dsa.pub
                   2500: 
                   2501: 
                   2502: Now take the output of id-dsa.pub and append it to your ~/.ssh/authorized_keys
                   2503: file on ftp.NetBSD.org. You can remove the key after the upload is done!
                   2504: 
                   2505: Next, test if your ssh connection really works:
                   2506: 
                   2507: chroot-# ssh ftp.NetBSD.org date
                   2508: 
                   2509: Use "-l yourNetBSDlogin" here as appropriate!
                   2510: 
                   2511: Now after all this works, you can exit the sandbox and start the upload:
                   2512: 
                   2513: chroot-# exit
                   2514: # cd /usr/sandbox/usr/pkgsrc
                   2515: # sh mk/bulk/do-sandbox-upload
                   2516: 
                   2517: 
                   2518: The upload process may take quite some time. Use ls(1) or du(1) on the FTP
                   2519: server to monitor progress of the upload. The upload script will take care of
                   2520: not uploading restricted packages and putting vulnerable packages into the
                   2521: vulnerable subdirectory.
                   2522: 
                   2523: After the upload has ended, first thing is to revoke ssh access:
                   2524: 
                   2525: nbftp% vi ~/.ssh/authorized_keys
                   2526:       Gdd:x!
                   2527: 
                   2528: Use whatever is needed to remove the key you've entered before! Last, move the
                   2529: uploaded packages out of the upload directory to have them accessible to
                   2530: everyone:
                   2531: 
                   2532: nbftp% cd /pub/NetBSD/packages/packages-200xQy/NetBSD-a.b.c/arch
                   2533: nbftp% mv upload/* .
                   2534: nbftp% rmdir upload
                   2535: nbftp% chmod 755 .
                   2536: 
                   2537: 
                   2538: 6.4. Creating a multiple CD-ROM packages collection
                   2539: 
                   2540: After your pkgsrc bulk-build has completed, you may wish to create a CD-ROM set
                   2541: of the resulting binary packages to assist in installing packages on other
                   2542: machines. The pkgtools/cdpack package provides a simple tool for creating the
                   2543: ISO 9660 images. cdpack arranges the packages on the CD-ROMs in a way that
                   2544: keeps all the dependencies for a given package on the same CD as that package.
                   2545: 
                   2546: 6.4.1. Example of cdpack
                   2547: 
                   2548: Complete documentation for cdpack is found in the cdpack(1) man page. The
                   2549: following short example assumes that the binary packages are left in /usr/
                   2550: pkgsrc/packages/All and that sufficient disk space exists in /u2 to hold the
                   2551: ISO 9660 images.
                   2552: 
                   2553: # mkdir /u2/images
                   2554: # pkg_add /usr/pkgsrc/packages/All/cdpack
                   2555: # cdpack /usr/pkgsrc/packages/All /u2/images
                   2556: 
                   2557: 
                   2558: If you wish to include a common set of files (COPYRIGHT, README, etc.) on each
                   2559: CD in the collection, then you need to create a directory which contains these
                   2560: files. e.g.
                   2561: 
                   2562: # mkdir /tmp/common
                   2563: # echo "This is a README" > /tmp/common/README
                   2564: # echo "Another file" > /tmp/common/COPYING
                   2565: # mkdir /tmp/common/bin
                   2566: # echo "#!/bin/sh" > /tmp/common/bin/myscript
                   2567: # echo "echo Hello world" >> /tmp/common/bin/myscript
                   2568: # chmod 755 /tmp/common/bin/myscript
                   2569: 
                   2570: 
                   2571: Now create the images:
                   2572: 
                   2573: # cdpack -x /tmp/common /usr/pkgsrc/packages/All /u2/images
                   2574: 
                   2575: Each image will contain README, COPYING, and bin/myscript in their root
                   2576: directories.
                   2577: 
                   2578: Chapter 7. Directory layout of the installed files
                   2579: 
                   2580: Table of Contents
                   2581: 
                   2582: 7.1. File system layout in ${LOCALBASE}
                   2583: 7.2. File system layout in ${VARBASE}
                   2584: 
                   2585: The files that are installed by pkgsrc are organized in a way that is similar
                   2586: to what you find in the /usr directory of the base system. But some details are
                   2587: different. This is because pkgsrc initially came from FreeBSD and had adopted
                   2588: its file system hierarchy. Later it was largely influenced by NetBSD. But no
                   2589: matter which operating system you are using pkgsrc with, you can expect the
                   2590: same layout for pkgsrc.
                   2591: 
                   2592: There are mainly four root directories for pkgsrc, which are all configurable
                   2593: in the bootstrap/bootstrap script. When pkgsrc has been installed as root, the
                   2594: default locations are:
                   2595: 
                   2596: LOCALBASE=              /usr/pkg
                   2597: PKG_SYSCONFBASE=        /usr/pkg/etc
                   2598: VARBASE=                /var
                   2599: PKG_DBDIR=              /var/db/pkg
                   2600: 
                   2601: In unprivileged mode (when pkgsrc has been installed as any other user), the
                   2602: default locations are:
                   2603: 
                   2604: LOCALBASE=              ${HOME}/pkg
                   2605: PKG_SYSCONFBASE=        ${HOME}/pkg/etc
                   2606: VARBASE=                ${HOME}/pkg/var
                   2607: PKG_DBDIR=              ${HOME}/pkg/var/db/pkg
                   2608: 
                   2609: What these four directories are for, and what they look like is explained
                   2610: below.
                   2611: 
                   2612:   * LOCALBASE corresponds to the /usr directory in the base system. It is the
                   2613:     "main" directory where the files are installed and contains the well-known
                   2614:     subdirectories like bin, include, lib, share and sbin.
                   2615: 
                   2616:   * VARBASE corresponds to /var in the base system. Some programs (especially
                   2617:     games, network daemons) need write access to it during normal operation.
                   2618: 
                   2619:   * PKG_SYSCONFDIR corresponds to /etc in the base system. It contains
                   2620:     configuration files of the packages, as well as pkgsrc's mk.conf itself.
                   2621: 
                   2622: 7.1. File system layout in ${LOCALBASE}
                   2623: 
                   2624: The following directories exist in a typical pkgsrc installation in $
                   2625: {LOCALBASE}.
                   2626: 
                   2627: bin
                   2628: 
                   2629:     Contains executable programs that are intended to be directly used by the
                   2630:     end user.
                   2631: 
                   2632: emul
                   2633: 
                   2634:     Contains files for the emulation layers of various other operating systems,
                   2635:     especially for NetBSD.
                   2636: 
                   2637: etc (the usual location of ${PKG_SYSCONFDIR})
                   2638: 
                   2639:     Contains the configuration files.
                   2640: 
                   2641: include
                   2642: 
                   2643:     Contains headers for the C and C++ programming languages.
                   2644: 
                   2645: info
                   2646: 
                   2647:     Contains GNU info files of various packages.
                   2648: 
                   2649: lib
                   2650: 
                   2651:     Contains shared and static libraries.
                   2652: 
                   2653: libdata
                   2654: 
                   2655:     Contains data files that don't change after installation. Other data files
                   2656:     belong into ${VARBASE}.
                   2657: 
                   2658: libexec
                   2659: 
                   2660:     Contains programs that are not intended to be used by end users, such as
                   2661:     helper programs or network daemons.
                   2662: 
                   2663: libexec/cgi-bin
                   2664: 
                   2665:     Contains programs that are intended to be executed as CGI scripts by a web
                   2666:     server.
                   2667: 
                   2668: man (the usual value of ${PKGMANDIR})
                   2669: 
                   2670:     Contains brief documentation in form of manual pages.
                   2671: 
                   2672: sbin
                   2673: 
                   2674:     Contains programs that are intended to be used only by the super-user.
                   2675: 
                   2676: share
                   2677: 
                   2678:     Contains platform-independent data files that don't change after
                   2679:     installation.
                   2680: 
                   2681: share/doc
                   2682: 
                   2683:     Contains documentation files provided by the packages.
                   2684: 
                   2685: share/examples
                   2686: 
                   2687:     Contains example files provided by the packages. Among others, the original
                   2688:     configuration files are saved here and copied to ${PKG_SYSCONFDIR} during
                   2689:     installation.
                   2690: 
                   2691: share/examples/rc.d
                   2692: 
                   2693:     Contains the original files for rc.d scripts.
                   2694: 
                   2695: var (the usual location of ${VARBASE})
                   2696: 
                   2697:     Contains files that may be modified after installation.
                   2698: 
                   2699: 7.2. File system layout in ${VARBASE}
                   2700: 
                   2701: db/pkg (the usual location of ${PKG_DBDIR})
                   2702: 
                   2703:     Contains information about the currently installed packages.
                   2704: 
                   2705: games
                   2706: 
                   2707:     Contains highscore files.
                   2708: 
                   2709: log
                   2710: 
                   2711:     Contains log files.
                   2712: 
                   2713: run
                   2714: 
                   2715:     Contains informational files about daemons that are currently running.
                   2716: 
                   2717: Chapter 8. Frequently Asked Questions
                   2718: 
                   2719: Table of Contents
                   2720: 
                   2721: 8.1. Are there any mailing lists for pkg-related discussion?
                   2722: 8.2. Where's the pkgviews documentation?
                   2723: 8.3. Utilities for package management (pkgtools)
                   2724: 8.4. How to use pkgsrc as non-root
                   2725: 8.5. How to resume transfers when fetching distfiles?
1.4       rillig   2726: 8.6. How can I install/use modular X.org from pkgsrc?
                   2727: 8.7. How to fetch files from behind a firewall
                   2728: 8.8. How do I tell make fetch to do passive FTP?
                   2729: 8.9. How to fetch all distfiles at once
                   2730: 8.10. What does "Don't know how to make /usr/share/tmac/tmac.andoc" mean?
                   2731: 8.11. What does "Could not find bsd.own.mk" mean?
                   2732: 8.12. Using 'sudo' with pkgsrc
                   2733: 8.13. How do I change the location of configuration files?
                   2734: 8.14. Automated security checks
                   2735: 8.15. Why do some packages ignore my CFLAGS?
                   2736: 8.16. A package does not build. What shall I do?
                   2737: 8.17. What does "Makefile appears to contain unresolved cvs/rcs/??? merge
1.1       dsieger  2738:     conflicts" mean?
                   2739: 
                   2740: This section contains hints, tips & tricks on special things in pkgsrc that we
                   2741: didn't find a better place for in the previous chapters, and it contains items
                   2742: for both pkgsrc users and developers.
                   2743: 
                   2744: 8.1. Are there any mailing lists for pkg-related discussion?
                   2745: 
                   2746: The following mailing lists may be of interest to pkgsrc users:
                   2747: 
                   2748:   * pkgsrc-users: This is a general purpose list for most issues regarding
                   2749:     pkgsrc, regardless of platform, e.g. soliciting user help for pkgsrc
                   2750:     configuration, unexpected build failures, using particular packages,
                   2751:     upgrading pkgsrc installations, questions regarding the pkgsrc release
                   2752:     branches, etc. General announcements or proposals for changes that impact
                   2753:     the pkgsrc user community, e.g. major infrastructure changes, new features,
                   2754:     package removals, etc., may also be posted.
                   2755: 
                   2756:   * pkgsrc-bulk: A list where the results of pkgsrc bulk builds are sent and
                   2757:     discussed.
                   2758: 
                   2759:   * pkgsrc-changes: This list is for those who are interested in getting a
                   2760:     commit message for every change committed to pkgsrc. It is also available
                   2761:     in digest form, meaning one daily message containing all commit messages
                   2762:     for changes to the package source tree in that 24 hour period.
                   2763: 
                   2764: To subscribe, do:
                   2765: 
                   2766: % echo subscribe listname | mail majordomo@NetBSD.org
                   2767: 
                   2768: Archives for all these mailing lists are available from http://
                   2769: mail-index.NetBSD.org/.
                   2770: 
                   2771: 8.2. Where's the pkgviews documentation?
                   2772: 
                   2773: Pkgviews is tightly integrated with buildlink. You can find a pkgviews User's
                   2774: guide in pkgsrc/mk/buildlink3/PKGVIEWS_UG.
                   2775: 
                   2776: 8.3. Utilities for package management (pkgtools)
                   2777: 
                   2778: The directory pkgsrc/pkgtools contains a number of useful utilities for both
                   2779: users and developers of pkgsrc. This section attempts only to make the reader
                   2780: aware of the utilities and when they might be useful, and not to duplicate the
                   2781: documentation that comes with each package.
                   2782: 
                   2783: Utilities used by pkgsrc (automatically installed when needed):
                   2784: 
                   2785:   * pkgtools/x11-links: Symlinks for use by buildlink.
                   2786: 
                   2787: OS tool augmentation (automatically installed when needed):
                   2788: 
                   2789:   * pkgtools/digest: Calculates various kinds of checksums (including SHA1).
                   2790: 
                   2791:   * pkgtools/libnbcompat: Compatibility library for pkgsrc tools.
                   2792: 
                   2793:   * pkgtools/mtree: Installed on non-BSD systems due to lack of native mtree.
                   2794: 
                   2795:   * pkgtools/pkg_install: Up-to-date replacement for /usr/sbin/pkg_install, or
                   2796:     for use on operating systems where pkg_install is not present.
                   2797: 
                   2798: Utilities used by pkgsrc (not automatically installed):
                   2799: 
                   2800:   * pkgtools/pkg_tarup: Create a binary package from an already-installed
                   2801:     package. Used by make replace to save the old package.
                   2802: 
                   2803:   * pkgtools/dfdisk: Adds extra functionality to pkgsrc, allowing it to fetch
                   2804:     distfiles from multiple locations. It currently supports the following
                   2805:     methods: multiple CD-ROMs and network FTP/HTTP connections.
                   2806: 
                   2807:   * pkgtools/xpkgwedge: Put X11 packages someplace else (enabled by default).
                   2808: 
                   2809:   * devel/cpuflags: Determine the best compiler flags to optimise code for your
                   2810:     current CPU and compiler.
                   2811: 
                   2812: Utilities for keeping track of installed packages, being up to date, etc:
                   2813: 
                   2814:   * pkgtools/pkg_chk: Reports on packages whose installed versions do not match
                   2815:     the latest pkgsrc entries.
                   2816: 
                   2817:   * pkgtools/pkgdep: Makes dependency graphs of packages, to aid in choosing a
                   2818:     strategy for updating.
                   2819: 
                   2820:   * pkgtools/pkgdepgraph: Makes graphs from the output of pkgtools/pkgdep (uses
                   2821:     graphviz).
                   2822: 
                   2823:   * pkgtools/pkglint: The pkglint(1) program checks a pkgsrc entry for errors,
                   2824:     lintpkgsrc(1) does various checks on the complete pkgsrc system.
                   2825: 
                   2826:   * pkgtools/pkgsurvey: Report what packages you have installed.
                   2827: 
                   2828: Utilities for people maintaining or creating individual packages:
                   2829: 
                   2830:   * pkgtools/pkgdiff: Automate making and maintaining patches for a package
                   2831:     (includes pkgdiff, pkgvi, mkpatches, etc.).
                   2832: 
                   2833:   * pkgtools/rpm2pkg, pkgtools/url2pkg: Aids in converting to pkgsrc.
                   2834: 
                   2835:   * pkgtools/gensolpkg: Convert pkgsrc to a Solaris package.
                   2836: 
                   2837: Utilities for people maintaining pkgsrc (or: more obscure pkg utilities)
                   2838: 
                   2839:   * pkgtools/pkg_comp: Build packages in a chrooted area.
                   2840: 
                   2841:   * pkgtools/libkver: Spoof kernel version for chrooted cross builds.
                   2842: 
                   2843: 8.4. How to use pkgsrc as non-root
                   2844: 
                   2845: If you want to use pkgsrc as non-root user, you can set some variables to make
                   2846: pkgsrc work under these conditions. At the very least, you need to set
                   2847: UNPRIVILEGED to "yes"; this will turn on unprivileged mode and set multiple
                   2848: related variables to allow installation of packages as non-root.
                   2849: 
                   2850: In case the defaults are not enough, you may want to tune some other variables
                   2851: used. For example, if the automatic user/group detection leads to incorrect
                   2852: values (or not the ones you would like to use), you can change them by setting
                   2853: UNPRIVILEGED_USER and UNPRIVILEGED_GROUP respectively.
                   2854: 
                   2855: As regards bootstrapping, please note that the bootstrap script will ease
                   2856: non-root configuration when given the "--ignore-user-check" flag, as it will
                   2857: choose and use multiple default directories under ~/pkg as the installation
                   2858: targets. These directories can be overridden by the "--prefix" flag provided by
                   2859: the script, as well as some others that allow finer tuning of the tree layout.
                   2860: 
                   2861: 8.5. How to resume transfers when fetching distfiles?
                   2862: 
                   2863: By default, resuming transfers in pkgsrc is disabled, but you can enable this
1.4       rillig   2864: feature by adding the option PKG_RESUME_TRANSFERS=YES into mk.conf. If, during
                   2865: a fetch step, an incomplete distfile is found, pkgsrc will try to resume it.
1.1       dsieger  2866: 
                   2867: You can also use a different program than the default ftp(1) by changing the
                   2868: FETCH_CMD variable. Don't forget to set FETCH_RESUME_ARGS and FETCH_OUTPUT_ARGS
                   2869: if you are not using default values.
                   2870: 
                   2871: For example, if you want to use wget to resume downloads, you'll have to use
                   2872: something like:
                   2873: 
                   2874: FETCH_CMD=             wget
                   2875: FETCH_BEFORE_ARGS=     --passive-ftp
                   2876: FETCH_RESUME_ARGS=     -c
                   2877: FETCH_OUTPUT_ARGS=     -O
                   2878: 
1.4       rillig   2879: 8.6. How can I install/use modular X.org from pkgsrc?
1.1       dsieger  2880: 
1.4       rillig   2881: If you want to use modular X.org from pkgsrc instead of your system's own X11
                   2882: (/usr/X11R6, /usr/openwin, ...) you will have to add the following line into
1.1       dsieger  2883: mk.conf:
                   2884: 
1.4       rillig   2885: X11_TYPE=modular
1.1       dsieger  2886: 
                   2887: Note
                   2888: 
1.4       rillig   2889: The DragonFly operating system defaults to using modular X.org from pkgsrc.
1.1       dsieger  2890: 
1.4       rillig   2891: 8.7. How to fetch files from behind a firewall
1.1       dsieger  2892: 
                   2893: If you are sitting behind a firewall which does not allow direct connections to
                   2894: Internet hosts (i.e. non-NAT), you may specify the relevant proxy hosts. This
                   2895: is done using an environment variable in the form of a URL, e.g. in Amdahl, the
                   2896: machine "orpheus.amdahl.com" is one of the firewalls, and it uses port 80 as
                   2897: the proxy port number. So the proxy environment variables are:
                   2898: 
                   2899: ftp_proxy=ftp://orpheus.amdahl.com:80/
                   2900: http_proxy=http://orpheus.amdahl.com:80/
                   2901: 
1.4       rillig   2902: 8.8. How do I tell make fetch to do passive FTP?
1.1       dsieger  2903: 
                   2904: This depends on which utility is used to retrieve distfiles. From bsd.pkg.mk,
                   2905: FETCH_CMD is assigned the first available command from the following list:
                   2906: 
                   2907:   * ${LOCALBASE}/bin/ftp
                   2908: 
                   2909:   * /usr/bin/ftp
                   2910: 
                   2911: On a default NetBSD installation, this will be /usr/bin/ftp, which
                   2912: automatically tries passive connections first, and falls back to active
                   2913: connections if the server refuses to do passive. For the other tools, add the
1.4       rillig   2914: following to your mk.conf file: PASSIVE_FETCH=1.
1.1       dsieger  2915: 
                   2916: Having that option present will prevent /usr/bin/ftp from falling back to
                   2917: active transfers.
                   2918: 
1.4       rillig   2919: 8.9. How to fetch all distfiles at once
1.1       dsieger  2920: 
                   2921: You would like to download all the distfiles in a single batch from work or
                   2922: university, where you can't run a make fetch. There is an archive of distfiles
                   2923: on ftp.NetBSD.org, but downloading the entire directory may not be appropriate.
                   2924: 
                   2925: The answer here is to do a make fetch-list in /usr/pkgsrc or one of its
                   2926: subdirectories, carry the resulting list to your machine at work/school and use
                   2927: it there. If you don't have a NetBSD-compatible ftp(1) (like tnftp) at work,
                   2928: don't forget to set FETCH_CMD to something that fetches a URL:
                   2929: 
                   2930: At home:
                   2931: 
                   2932: % cd /usr/pkgsrc
                   2933: % make fetch-list FETCH_CMD=wget DISTDIR=/tmp/distfiles >/tmp/fetch.sh
                   2934: % scp /tmp/fetch.sh work:/tmp
                   2935: 
                   2936: At work:
                   2937: 
                   2938: % sh /tmp/fetch.sh
                   2939: 
                   2940: then tar up /tmp/distfiles and take it home.
                   2941: 
                   2942: If you have a machine running NetBSD, and you want to get all distfiles (even
                   2943: ones that aren't for your machine architecture), you can do so by using the
                   2944: above-mentioned make fetch-list approach, or fetch the distfiles directly by
                   2945: running:
                   2946: 
                   2947: % make mirror-distfiles
                   2948: 
                   2949: If you even decide to ignore NO_{SRC,BIN}_ON_{FTP,CDROM}, then you can get
                   2950: everything by running:
                   2951: 
                   2952: % make fetch NO_SKIP=yes
                   2953: 
1.4       rillig   2954: 8.10. What does "Don't know how to make /usr/share/tmac/tmac.andoc" mean?
1.1       dsieger  2955: 
                   2956: When compiling the pkgtools/pkg_install package, you get the error from make
                   2957: that it doesn't know how to make /usr/share/tmac/tmac.andoc? This indicates
                   2958: that you don't have installed the "text" set (nroff, ...) from the NetBSD base
                   2959: distribution on your machine. It is recommended to do that to format man pages.
                   2960: 
                   2961: In the case of the pkgtools/pkg_install package, you can get away with setting
1.4       rillig   2962: NOMAN=YES either in the environment or in mk.conf.
1.1       dsieger  2963: 
1.4       rillig   2964: 8.11. What does "Could not find bsd.own.mk" mean?
1.1       dsieger  2965: 
                   2966: You didn't install the compiler set, comp.tgz, when you installed your NetBSD
                   2967: machine. Please get and install it, by extracting it in /:
                   2968: 
                   2969: # cd /
                   2970: # tar --unlink -zxvpf .../comp.tgz
                   2971: 
                   2972: comp.tgz is part of every NetBSD release. Get the one that corresponds to your
                   2973: release (determine via uname -r).
                   2974: 
1.4       rillig   2975: 8.12. Using 'sudo' with pkgsrc
1.1       dsieger  2976: 
                   2977: When installing packages as non-root user and using the just-in-time su(1)
                   2978: feature of pkgsrc, it can become annoying to type in the root password for each
                   2979: required package installed. To avoid this, the sudo package can be used, which
                   2980: does password caching over a limited time. To use it, install sudo (either as
1.4       rillig   2981: binary package or from security/sudo) and then put the following into your
                   2982: mk.conf, somewhere after the definition of the LOCALBASE variable:
1.1       dsieger  2983: 
                   2984: .if exists(${LOCALBASE}/bin/sudo)
                   2985: SU_CMD=        ${LOCALBASE}/bin/sudo /bin/sh -c
                   2986: .endif
                   2987: 
1.4       rillig   2988: 8.13. How do I change the location of configuration files?
1.1       dsieger  2989: 
                   2990: As the system administrator, you can choose where configuration files are
                   2991: installed. The default settings make all these files go into ${PREFIX}/etc or
                   2992: some of its subdirectories; this may be suboptimal depending on your
                   2993: expectations (e.g., a read-only, NFS-exported PREFIX with a need of per-machine
                   2994: configuration of the provided packages).
                   2995: 
                   2996: In order to change the defaults, you can modify the PKG_SYSCONFBASE variable
1.4       rillig   2997: (in mk.conf) to point to your preferred configuration directory; some common
                   2998: examples include /etc or /etc/pkg.
1.1       dsieger  2999: 
                   3000: Furthermore, you can change this value on a per-package basis by setting the
                   3001: PKG_SYSCONFDIR.${PKG_SYSCONFVAR} variable. PKG_SYSCONFVAR's value usually
                   3002: matches the name of the package you would like to modify, that is, the contents
                   3003: of PKGBASE.
                   3004: 
                   3005: Note that after changing these settings, you must rebuild and reinstall any
                   3006: affected packages.
                   3007: 
1.4       rillig   3008: 8.14. Automated security checks
1.1       dsieger  3009: 
                   3010: Please be aware that there can often be bugs in third-party software, and some
                   3011: of these bugs can leave a machine vulnerable to exploitation by attackers. In
                   3012: an effort to lessen the exposure, the NetBSD packages team maintains a database
                   3013: of known-exploits to packages which have at one time been included in pkgsrc.
                   3014: The database can be downloaded automatically, and a security audit of all
                   3015: packages installed on a system can take place. To do this, install the security
                   3016: /audit-packages package. It has two components:
                   3017: 
                   3018:  1. download-vulnerability-list, an easy way to download a list of the security
                   3019:     vulnerabilities information. This list is kept up to date by the NetBSD
                   3020:     security officer and the NetBSD packages team, and is distributed from the
                   3021:     NetBSD ftp server:
                   3022: 
                   3023:     ftp://ftp.NetBSD.org/pub/NetBSD/packages/distfiles/pkg-vulnerabilities
                   3024: 
                   3025:  2. audit-packages, an easy way to audit the current machine, checking each
                   3026:     vulnerability which is known. If a vulnerable package is installed, it will
                   3027:     be shown by output to stdout, including a description of the type of
                   3028:     vulnerability, and a URL containing more information.
                   3029: 
                   3030: Use of the security/audit-packages package is strongly recommended! After
                   3031: "audit-packages" is installed, please read the package's message, which you can
                   3032: get by running pkg_info -D audit-packages.
                   3033: 
                   3034: If this package is installed, pkgsrc builds will use it to perform a security
                   3035: check before building any package. See Section 5.2, "Variables affecting the
                   3036: build process" for ways to control this check.
                   3037: 
1.4       rillig   3038: 8.15. Why do some packages ignore my CFLAGS?
1.1       dsieger  3039: 
                   3040: When you add your own preferences to the CFLAGS variable in your mk.conf, these
                   3041: flags are passed in environment variables to the ./configure scripts and to
                   3042: make(1). Some package authors ignore the CFLAGS from the environment variable
                   3043: by overriding them in the Makefiles of their package.
                   3044: 
                   3045: Currently there is no solution to this problem. If you really need the package
                   3046: to use your CFLAGS you should run make patch in the package directory and then
                   3047: inspect any Makefile and Makefile.in for whether they define CFLAGS explicitly.
                   3048: Usually you can remove these lines. But be aware that some "smart" programmers
                   3049: write so bad code that it only works for the specific combination of CFLAGS
                   3050: they have chosen.
                   3051: 
1.4       rillig   3052: 8.16. A package does not build. What shall I do?
1.1       dsieger  3053: 
                   3054:  1. Make sure that your copy of pkgsrc is consistent. A case that occurs often
                   3055:     is that people only update pkgsrc in parts, because of performance reasons.
                   3056:     Since pkgsrc is one large system, not a collection of many small systems,
                   3057:     there are sometimes changes that only work when the whole pkgsrc tree is
                   3058:     updated.
                   3059: 
                   3060:  2. Make sure that you don't have any CVS conflicts. Search for "<<<<<<" or
                   3061:     ">>>>>>" in all your pkgsrc files.
                   3062: 
                   3063:  3. Make sure that you don't have old copies of the packages extracted. Run
                   3064:     make clean clean-depends to verify this.
                   3065: 
                   3066:  4. If the problem still exists, write a mail to the pkgsrc-users mailing list.
                   3067: 
1.4       rillig   3068: 8.17. What does "Makefile appears to contain unresolved cvs/rcs/??? merge
1.1       dsieger  3069: conflicts" mean?
                   3070: 
                   3071: You have modified a file from pkgsrc, and someone else has modified that same
                   3072: file afterwards in the CVS repository. Both changes are in the same region of
                   3073: the file, so when you updated pkgsrc, the cvs command marked the conflicting
                   3074: changes in the file. Because of these markers, the file is no longer a valid
                   3075: Makefile.
                   3076: 
                   3077: Have a look at that file, and if you don't need your local changes anymore, you
                   3078: can remove that file and run cvs -q update -dP in that directory to download
                   3079: the current version.
                   3080: 
                   3081: Part II. The pkgsrc developer's guide
                   3082: 
                   3083: This part of the book deals with creating and modifying packages. It starts
                   3084: with a "HOWTO"-like guide on creating a new package. The remaining chapters are
                   3085: more like a reference manual for pkgsrc.
                   3086: 
                   3087: Table of Contents
                   3088: 
                   3089: 9. Creating a new pkgsrc package from scratch
                   3090: 
                   3091:     9.1. Common types of packages
                   3092: 
                   3093:         9.1.1. Perl modules
                   3094:         9.1.2. KDE applications
                   3095: 
                   3096:     9.2. Examples
                   3097: 
                   3098:         9.2.1. How the www/nvu package came into pkgsrc
                   3099: 
                   3100: 10. Package components - files, directories and contents
                   3101: 
                   3102:     10.1. Makefile
                   3103:     10.2. distinfo
                   3104:     10.3. patches/*
                   3105: 
                   3106:         10.3.1. Structure of a single patch file
                   3107:         10.3.2. Creating patch files
                   3108:         10.3.3. Sources where the patch files come from
                   3109:         10.3.4. Patching guidelines
                   3110:         10.3.5. Feedback to the author
                   3111: 
                   3112:     10.4. Other mandatory files
                   3113:     10.5. Optional files
                   3114: 
                   3115:         10.5.1. Files affecting the binary package
                   3116:         10.5.2. Files affecting the build process
                   3117:         10.5.3. Files affecting nothing at all
                   3118: 
                   3119:     10.6. work*
                   3120:     10.7. files/*
                   3121: 
                   3122: 11. Programming in Makefiles
                   3123: 
                   3124:     11.1. Caveats
                   3125:     11.2. Makefile variables
                   3126: 
                   3127:         11.2.1. Naming conventions
                   3128: 
                   3129:     11.3. Code snippets
                   3130: 
                   3131:         11.3.1. Adding things to a list
                   3132:         11.3.2. Converting an internal list into an external list
                   3133:         11.3.3. Passing variables to a shell command
                   3134:         11.3.4. Quoting guideline
                   3135:         11.3.5. Workaround for a bug in BSD Make
                   3136: 
                   3137: 12. PLIST issues
                   3138: 
                   3139:     12.1. RCS ID
                   3140:     12.2. Semi-automatic PLIST generation
                   3141:     12.3. Tweaking output of make print-PLIST
                   3142:     12.4. Variable substitution in PLIST
                   3143:     12.5. Man page compression
                   3144:     12.6. Changing PLIST source with PLIST_SRC
                   3145:     12.7. Platform-specific and differing PLISTs
                   3146:     12.8. Sharing directories between packages
                   3147: 
                   3148: 13. Buildlink methodology
                   3149: 
                   3150:     13.1. Converting packages to use buildlink3
                   3151:     13.2. Writing buildlink3.mk files
                   3152: 
                   3153:         13.2.1. Anatomy of a buildlink3.mk file
                   3154:         13.2.2. Updating BUILDLINK_API_DEPENDS.pkg in buildlink3.mk files
                   3155: 
                   3156:     13.3. Writing builtin.mk files
                   3157: 
                   3158:         13.3.1. Anatomy of a builtin.mk file
                   3159:         13.3.2. Global preferences for native or pkgsrc software
                   3160: 
                   3161: 14. The pkginstall framework
                   3162: 
                   3163:     14.1. Files and directories outside the installation prefix
                   3164: 
                   3165:         14.1.1. Directory manipulation
                   3166:         14.1.2. File manipulation
                   3167: 
                   3168:     14.2. Configuration files
                   3169: 
                   3170:         14.2.1. How PKG_SYSCONFDIR is set
                   3171:         14.2.2. Telling the software where configuration files are
                   3172:         14.2.3. Patching installations
                   3173:         14.2.4. Disabling handling of configuration files
                   3174: 
                   3175:     14.3. System startup scripts
                   3176: 
                   3177:         14.3.1. Disabling handling of system startup scripts
                   3178: 
                   3179:     14.4. System users and groups
                   3180:     14.5. System shells
                   3181: 
                   3182:         14.5.1. Disabling shell registration
                   3183: 
                   3184:     14.6. Fonts
                   3185: 
                   3186:         14.6.1. Disabling automatic update of the fonts databases
                   3187: 
                   3188: 15. Options handling
                   3189: 
                   3190:     15.1. Global default options
                   3191:     15.2. Converting packages to use bsd.options.mk
                   3192:     15.3. Option Names
                   3193: 
                   3194: 16. The build process
                   3195: 
                   3196:     16.1. Introduction
                   3197:     16.2. Program location
                   3198:     16.3. Directories used during the build process
                   3199:     16.4. Running a phase
                   3200:     16.5. The fetch phase
                   3201: 
                   3202:         16.5.1. What to fetch and where to get it from
                   3203:         16.5.2. How are the files fetched?
                   3204: 
                   3205:     16.6. The checksum phase
                   3206:     16.7. The extract phase
                   3207:     16.8. The patch phase
                   3208:     16.9. The tools phase
                   3209:     16.10. The wrapper phase
                   3210:     16.11. The configure phase
                   3211:     16.12. The build phase
                   3212:     16.13. The test phase
                   3213:     16.14. The install phase
                   3214:     16.15. The package phase
                   3215:     16.16. Cleaning up
                   3216:     16.17. Other helpful targets
                   3217: 
                   3218: 17. Tools needed for building or running
                   3219: 
                   3220:     17.1. Tools for pkgsrc builds
                   3221:     17.2. Tools needed by packages
                   3222:     17.3. Tools provided by platforms
                   3223:     17.4. Questions regarding the tools
                   3224: 
                   3225: 18. Making your package work
                   3226: 
                   3227:     18.1. General operation
                   3228: 
                   3229:         18.1.1. Portability of packages
                   3230:         18.1.2. How to pull in user-settable variables from mk.conf
                   3231:         18.1.3. User interaction
                   3232:         18.1.4. Handling licenses
                   3233:         18.1.5. Restricted packages
                   3234:         18.1.6. Handling dependencies
                   3235:         18.1.7. Handling conflicts with other packages
                   3236:         18.1.8. Packages that cannot or should not be built
                   3237:         18.1.9. Packages which should not be deleted, once installed
                   3238:         18.1.10. Handling packages with security problems
                   3239:         18.1.11. How to handle incrementing versions when fixing an existing
                   3240:             package
                   3241:         18.1.12. Substituting variable text in the package files (the SUBST
                   3242:             framework)
                   3243: 
                   3244:     18.2. Fixing problems in the fetch phase
                   3245: 
                   3246:         18.2.1. Packages whose distfiles aren't available for plain downloading
                   3247:         18.2.2. How to handle modified distfiles with the 'old' name
                   3248: 
                   3249:     18.3. Fixing problems in the configure phase
                   3250: 
                   3251:         18.3.1. Shared libraries - libtool
                   3252:         18.3.2. Using libtool on GNU packages that already support libtool
                   3253:         18.3.3. GNU Autoconf/Automake
                   3254: 
                   3255:     18.4. Programming languages
                   3256: 
                   3257:         18.4.1. C, C++, and Fortran
                   3258:         18.4.2. Java
                   3259:         18.4.3. Packages containing perl scripts
                   3260:         18.4.4. Other programming languages
                   3261: 
                   3262:     18.5. Fixing problems in the build phase
                   3263: 
                   3264:         18.5.1. Compiling C and C++ code conditionally
                   3265:         18.5.2. How to handle compiler bugs
                   3266:         18.5.3. Undefined reference to "..."
                   3267:         18.5.4. Running out of memory
                   3268: 
                   3269:     18.6. Fixing problems in the install phase
                   3270: 
                   3271:         18.6.1. Creating needed directories
                   3272:         18.6.2. Where to install documentation
                   3273:         18.6.3. Installing highscore files
1.4       rillig   3274:         18.6.4. Adding DESTDIR support to packages
                   3275:         18.6.5. Packages with hardcoded paths to other interpreters
                   3276:         18.6.6. Packages installing perl modules
                   3277:         18.6.7. Packages installing info files
                   3278:         18.6.8. Packages installing man pages
                   3279:         18.6.9. Packages installing GConf2 data files
                   3280:         18.6.10. Packages installing scrollkeeper data files
                   3281:         18.6.11. Packages installing X11 fonts
                   3282:         18.6.12. Packages installing GTK2 modules
                   3283:         18.6.13. Packages installing SGML or XML data
                   3284:         18.6.14. Packages installing extensions to the MIME database
                   3285:         18.6.15. Packages using intltool
                   3286:         18.6.16. Packages installing startup scripts
                   3287:         18.6.17. Packages installing TeX modules
                   3288:         18.6.18. Packages supporting running binaries in emulation
                   3289:         18.6.19. Packages installing hicolor theme icons
                   3290:         18.6.20. Packages installing desktop files
1.1       dsieger  3291: 
                   3292:     18.7. Marking packages as having problems
                   3293: 
                   3294: 19. Debugging
                   3295: 20. Submitting and Committing
                   3296: 
                   3297:     20.1. Submitting binary packages
                   3298:     20.2. Submitting source packages (for non-NetBSD-developers)
                   3299:     20.3. General notes when adding, updating, or removing packages
                   3300:     20.4. Committing: Importing a package into CVS
                   3301:     20.5. Updating a package to a newer version
                   3302:     20.6. Moving a package in pkgsrc
                   3303: 
                   3304: 21. Frequently Asked Questions
                   3305: 22. GNOME packaging and porting
                   3306: 
                   3307:     22.1. Meta packages
                   3308:     22.2. Packaging a GNOME application
                   3309:     22.3. Updating GNOME to a newer version
                   3310:     22.4. Patching guidelines
                   3311: 
                   3312: Chapter 9. Creating a new pkgsrc package from scratch
                   3313: 
                   3314: Table of Contents
                   3315: 
                   3316: 9.1. Common types of packages
                   3317: 
                   3318:     9.1.1. Perl modules
                   3319:     9.1.2. KDE applications
                   3320: 
                   3321: 9.2. Examples
                   3322: 
                   3323:     9.2.1. How the www/nvu package came into pkgsrc
                   3324: 
                   3325: When you find a package that is not yet in pkgsrc, you most likely have a URL
                   3326: from where you can download the source code. Starting with this URL, creating a
                   3327: package involves only a few steps.
                   3328: 
                   3329:  1. First, install the packages pkgtools/url2pkg and pkgtools/pkglint.
                   3330: 
                   3331:  2. Then, choose one of the top-level directories as the category in which you
                   3332:     want to place your package. You can also create a directory of your own
                   3333:     (maybe called local). In that category directory, create another directory
                   3334:     for your package and change into it.
                   3335: 
                   3336:  3. Run the program url2pkg, which will ask you for a URL. Enter the URL of the
                   3337:     distribution file (in most cases a .tar.gz file) and watch how the basic
                   3338:     ingredients of your package are created automatically. The distribution
                   3339:     file is extracted automatically to fill in some details in the Makefile
                   3340:     that would otherwise have to be done manually.
                   3341: 
                   3342:  4. Examine the extracted files to determine the dependencies of your package.
                   3343:     Ideally, this is mentioned in some README file, but things may differ. For
                   3344:     each of these dependencies, look where it exists in pkgsrc, and if there is
                   3345:     a file called buildlink3.mk in that directory, add a line to your package
                   3346:     Makefile which includes that file just before the last line. If the
                   3347:     buildlink3.mk file does not exist, add a DEPENDS line to the Makefile,
                   3348:     which specifies the version of the dependency and where it can be found in
                   3349:     pkgsrc. This line should be placed in the third paragraph. If the
                   3350:     dependency is only needed for building the package, but not when using it,
                   3351:     use BUILD_DEPENDS instead of DEPENDS. Your package may then look like this:
                   3352: 
                   3353:     [...]
                   3354: 
                   3355:     BUILD_DEPENDS+= lua>=5.0:../../lang/lua
                   3356:     DEPENDS+=       screen-[0-9]*:../../misc/screen
                   3357:     DEPENDS+=       screen>=4.0:../../misc/screen
                   3358: 
                   3359:     [...]
                   3360: 
                   3361:     .include "../../category/package/buildlink3.mk"
                   3362:     .include "../../devel/glib2/buildlink3.mk"
                   3363:     .include "../../mk/bsd.pkg.mk"
                   3364: 
                   3365:  5. Run pkglint to see what things still need to be done to make your package a
                   3366:     "good" one. If you don't know what pkglint's warnings want to tell you, try
                   3367:     pkglint --explain or pkglint -e, which outputs additional explanations.
                   3368: 
                   3369:  6. In many cases the package is not yet ready to build. You can find
                   3370:     instructions for the most common cases in the next section, Section 9.1,
                   3371:     "Common types of packages". After you have followed the instructions over
                   3372:     there, you can hopefully continue here.
                   3373: 
                   3374:  7. Run bmake clean to clean the working directory from the extracted files.
                   3375:     Besides these files, a lot of cache files and other system information has
                   3376:     been saved in the working directory, which may become wrong after you
                   3377:     edited the Makefile.
                   3378: 
                   3379:  8. Now, run bmake to build the package. For the various things that can go
                   3380:     wrong in this phase, consult Chapter 18, Making your package work.
                   3381: 
                   3382:  9. When the package builds fine, the next step is to install the package. Run
                   3383:     bmake install and hope that everything works.
                   3384: 
                   3385: 10. Up to now, the file PLIST, which contains a list of the files that are
                   3386:     installed by the package, is nearly empty. Run bmake print-PLIST >PLIST to
                   3387:     generate a probably correct list. Check the file using your preferred text
                   3388:     editor to see if the list of files looks plausible.
                   3389: 
                   3390: 11. Run pkglint again to see if the generated PLIST contains garbage or not.
                   3391: 
                   3392: 12. When you ran bmake install, the package has been registered in the database
                   3393:     of installed files, but with an empty list of files. To fix this, run bmake
                   3394:     deinstall and bmake install again. Now the package is registered with the
                   3395:     list of files from PLIST.
                   3396: 
                   3397: 13. Run bmake package to create a binary package from the set of installed
                   3398:     files.
                   3399: 
                   3400: 9.1. Common types of packages
                   3401: 
                   3402: 9.1.1. Perl modules
                   3403: 
                   3404: Simple Perl modules are handled automatically by url2pkg, including
                   3405: dependencies.
                   3406: 
                   3407: 9.1.2. KDE applications
                   3408: 
                   3409: KDE applications should always include meta-pkgs/kde3/kde3.mk, which contains
                   3410: numerous settings that are typical of KDE packages.
                   3411: 
                   3412: 9.2. Examples
                   3413: 
                   3414: 9.2.1. How the www/nvu package came into pkgsrc
                   3415: 
                   3416: 9.2.1.1. The initial package
                   3417: 
                   3418: Looking at the file pkgsrc/doc/TODO, I saw that the "nvu" package has not yet
                   3419: been imported into pkgsrc. As the description says it has to do with the web,
                   3420: the obvious choice for the category is "www".
                   3421: 
                   3422: $ mkdir www/nvu
                   3423: $ cd www/nvu
                   3424: 
                   3425: The web site says that the sources are available as a tar file, so I fed that
                   3426: URL to the url2pkg program:
                   3427: 
                   3428: $ url2pkg http://cvs.nvu.com/download/nvu-1.0-sources.tar.bz2
                   3429: 
                   3430: My editor popped up, and I added a PKGNAME line below the DISTNAME line, as the
                   3431: package name should not have the word "sources" in it. I also filled in the
                   3432: MAINTAINER, HOMEPAGE and COMMENT fields. Then the package Makefile looked like
                   3433: that:
                   3434: 
1.2       rillig   3435: # $NetBSD$
1.1       dsieger  3436: #
                   3437: 
                   3438: DISTNAME=       nvu-1.0-sources
                   3439: PKGNAME=        nvu-1.0
                   3440: CATEGORIES=     www
                   3441: MASTER_SITES=   http://cvs.nvu.com/download/
                   3442: EXTRACT_SUFX=   .tar.bz2
                   3443: 
                   3444: MAINTAINER=     rillig@NetBSD.org
                   3445: HOMEPAGE=       http://cvs.nvu.com/
                   3446: COMMENT=        Web Authoring System
                   3447: 
                   3448: # url2pkg-marker (please do not remove this line.)
                   3449: .include "../../mk/bsd.pkg.mk"
                   3450: 
                   3451: Then, I quit the editor and watched pkgsrc downloading a large source archive:
                   3452: 
                   3453: url2pkg> Running "make makesum" ...
                   3454: => Required installed package digest>=20010302: digest-20060826 found
                   3455: => Fetching nvu-1.0-sources.tar.bz2
                   3456: Requesting http://cvs.nvu.com/download/nvu-1.0-sources.tar.bz2
                   3457: 100% |*************************************| 28992 KB  150.77 KB/s00:00 ETA
                   3458: 29687976 bytes retrieved in 03:12 (150.77 KB/s)
                   3459: url2pkg> Running "make extract" ...
                   3460: => Required installed package digest>=20010302: digest-20060826 found
                   3461: => Checksum SHA1 OK for nvu-1.0-sources.tar.bz2
                   3462: => Checksum RMD160 OK for nvu-1.0-sources.tar.bz2
                   3463: work.bacc -> /tmp/roland/pkgsrc/www/nvu/work.bacc
                   3464: ===> Installing dependencies for nvu-1.0
                   3465: ===> Overriding tools for nvu-1.0
                   3466: ===> Extracting for nvu-1.0
                   3467: url2pkg> Adjusting the Makefile.
                   3468: 
                   3469: Remember to correct CATEGORIES, HOMEPAGE, COMMENT, and DESCR when you're done!
                   3470: 
                   3471: Good luck! (See pkgsrc/doc/pkgsrc.txt for some more help :-)
                   3472: 
                   3473: 9.2.1.2. Fixing all kinds of problems to make the package work
                   3474: 
                   3475: Now that the package has been extracted, let's see what's inside it. The
                   3476: package has a README.txt, but that only says something about mozilla, so it's
                   3477: probably useless for seeing what dependencies this package has. But since there
                   3478: is a GNU configure script in the package, let's hope that it will complain
                   3479: about everything it needs.
                   3480: 
                   3481: $ bmake
                   3482: => Required installed package digest>=20010302: digest-20060826 found
                   3483: => Checksum SHA1 OK for nvu-1.0-sources.tar.bz2
                   3484: => Checksum RMD160 OK for nvu-1.0-sources.tar.bz2
                   3485: ===> Patching for nvu-1.0
                   3486: ===> Creating toolchain wrappers for nvu-1.0
                   3487: ===> Configuring for nvu-1.0
                   3488: [...]
                   3489: configure: error: Perl 5.004 or higher is required.
                   3490: [...]
                   3491: WARNING: Please add USE_TOOLS+=perl to the package Makefile.
                   3492: [...]
                   3493: 
                   3494: That worked quite well. So I opened the package Makefile in my editor, and
                   3495: since it already has a USE_TOOLS line, I just appended "perl" to it. Since the
                   3496: dependencies of the package have changed now, and since a perl wrapper is
                   3497: automatically installed in the "tools" phase, I need to build the package from
                   3498: scratch.
                   3499: 
                   3500: $ bmake clean
                   3501: ===> Cleaning for nvu-1.0
                   3502: $ bmake
                   3503: [...]
                   3504: *** /tmp/roland/pkgsrc/www/nvu/work.bacc/.tools/bin/make is not \
                   3505: GNU Make.  You will not be able to build Mozilla without GNU Make.
                   3506: [...]
                   3507: 
                   3508: So I added "gmake" to the USE_TOOLS line and tried again (from scratch).
                   3509: 
                   3510: [...]
                   3511: checking for GTK - version >= 1.2.0... no
                   3512: *** Could not run GTK test program, checking why...
                   3513: [...]
                   3514: 
                   3515: Now to the other dependencies. The first question is: Where is the GTK package
                   3516: hidden in pkgsrc?
                   3517: 
                   3518: $ echo ../../*/gtk*
                   3519: [many packages ...]
                   3520: $ echo ../../*/gtk
                   3521: ../../x11/gtk
                   3522: $ echo ../../*/gtk2
                   3523: ../../x11/gtk2
                   3524: $ echo ../../*/gtk2/bui*
                   3525: ../../x11/gtk2/buildlink3.mk
                   3526: 
                   3527: The first try was definitely too broad. The second one had exactly one result,
                   3528: which is very good. But there is one pitfall with GNOME packages. Before GNOME
                   3529: 2 had been released, there were already many GNOME 1 packages in pkgsrc. To be
                   3530: able to continue to use these packages, the GNOME 2 packages were imported as
                   3531: separate packages, and their names usually have a "2" appended. So I checked
                   3532: whether this was the case here, and indeed it was.
                   3533: 
                   3534: Since the GTK2 package has a buildlink3.mk file, adding the dependency is very
                   3535: easy. I just inserted an .include line before the last line of the package
                   3536: Makefile, so that it now looks like this:
                   3537: 
                   3538: [...]
                   3539: .include "../../x11/gtk2/buildlink3.mk"
                   3540: .include "../../mk/bsd.pkg.mk
                   3541: 
                   3542: After another bmake clean && bmake, the answer was:
                   3543: 
                   3544: [...]
                   3545: checking for gtk-config... /home/roland/pkg/bin/gtk-config
                   3546: checking for GTK - version >= 1.2.0... no
                   3547: *** Could not run GTK test program, checking why...
                   3548: *** The test program failed to compile or link. See the file config.log for the
                   3549: *** exact error that occured. This usually means GTK was incorrectly installed
                   3550: *** or that you have moved GTK since it was installed. In the latter case, you
                   3551: *** may want to edit the gtk-config script: /home/roland/pkg/bin/gtk-config
                   3552: configure: error: Test for GTK failed.
                   3553: [...]
                   3554: 
                   3555: In this particular case, the assumption that "every package prefers GNOME 2"
                   3556: had been wrong. The first of the lines above told me that this package really
                   3557: wanted to have the GNOME 1 version of GTK. If the package had looked for GTK2,
                   3558: it would have looked for pkg-config instead of gtk-config. So I changed the x11
                   3559: /gtk2 to x11/gtk in the package Makefile, and tried again.
                   3560: 
                   3561: [...]
                   3562: cc -o xpidl.o -c -DOSTYPE=\"NetBSD3\" -DOSARCH=\"NetBSD\"   -I../../../dist/include/xpcom -I../../../dist/include -I/tmp/roland/pkgsrc/www/nvu/work.bacc/mozilla/dist/include/nspr -I/usr/X11R6/include   -fPIC -DPIC -I/home/roland/pkg/include -I/usr/include  -I/usr/X11R6/include -Wall -W -Wno-unused -Wpointer-arith -Wcast-align -Wno-long-long -pedantic -O2 -I/home/roland/pkg/include -I/usr/include -Dunix -pthread -pipe  -DDEBUG -D_DEBUG -DDEBUG_roland -DTRACING -g -I/home/roland/pkg/include/glib/glib-1.2 -I/home/roland/pkg/lib/glib/include -I/usr/pkg/include/orbit-1.0   -I/home/roland/pkg/include -I/usr/include  -I/usr/X11R6/include -include ../../../mozilla-config.h -DMOZILLA_CLIENT -Wp,-MD,.deps/xpidl.pp xpidl.c
                   3563: In file included from xpidl.c:42:
                   3564: xpidl.h:53:24: libIDL/IDL.h: No such file or directory
                   3565: In file included from xpidl.c:42:
                   3566: xpidl.h:132: error: parse error before "IDL_ns"
                   3567: [...]
                   3568: 
                   3569: The package still does not find all of its dependencies. Now the question is:
                   3570: Which package provides the libIDL/IDL.h header file?
                   3571: 
                   3572: $ echo ../../*/*idl*
                   3573: ../../devel/py-idle ../../wip/idled ../../x11/acidlaunch
                   3574: $ echo ../../*/*IDL*
                   3575: ../../net/libIDL
                   3576: 
                   3577: Let's take the one from the second try. So I included the ../../net/libIDL/
                   3578: buildlink3.mk file and tried again. But the error didn't change. After digging
                   3579: through some of the code, I concluded that the build process of the package was
                   3580: broken and couldn't have ever worked, but since the Mozilla source tree is
                   3581: quite large, I didn't want to fix it. So I added the following to the package
                   3582: Makefile and tried again:
                   3583: 
                   3584: CPPFLAGS+=              -I${BUILDLINK_PREFIX.libIDL}/include/libIDL-2.0
                   3585: BUILDLINK_TRANSFORM+=   -l:IDL:IDL-2
                   3586: 
                   3587: The latter line is needed because the package expects the library libIDL.so,
                   3588: but only libIDL-2.so is available. So I told the compiler wrapper to rewrite
                   3589: that on the fly.
                   3590: 
                   3591: The next problem was related to a recent change of the FreeType interface. I
                   3592: looked up in www/seamonkey which patch files were relevant for this issue and
                   3593: copied them to the patches directory. Then I retried, fixed the patches so that
                   3594: they applied cleanly and retried again. This time, everything worked.
                   3595: 
                   3596: 9.2.1.3. Installing the package
                   3597: 
                   3598: $ bmake CHECK_FILES=no install
                   3599: [...]
                   3600: $ bmake print-PLIST >PLIST
                   3601: $ bmake deinstall
                   3602: $ bmake install
                   3603: 
                   3604: Chapter 10. Package components - files, directories and contents
                   3605: 
                   3606: Table of Contents
                   3607: 
                   3608: 10.1. Makefile
                   3609: 10.2. distinfo
                   3610: 10.3. patches/*
                   3611: 
                   3612:     10.3.1. Structure of a single patch file
                   3613:     10.3.2. Creating patch files
                   3614:     10.3.3. Sources where the patch files come from
                   3615:     10.3.4. Patching guidelines
                   3616:     10.3.5. Feedback to the author
                   3617: 
                   3618: 10.4. Other mandatory files
                   3619: 10.5. Optional files
                   3620: 
                   3621:     10.5.1. Files affecting the binary package
                   3622:     10.5.2. Files affecting the build process
                   3623:     10.5.3. Files affecting nothing at all
                   3624: 
                   3625: 10.6. work*
                   3626: 10.7. files/*
                   3627: 
                   3628: Whenever you're preparing a package, there are a number of files involved which
                   3629: are described in the following sections.
                   3630: 
                   3631: 10.1. Makefile
                   3632: 
                   3633: Building, installation and creation of a binary package are all controlled by
                   3634: the package's Makefile. The Makefile describes various things about a package,
                   3635: for example from where to get it, how to configure, build, and install it.
                   3636: 
                   3637: A package Makefile contains several sections that describe the package.
                   3638: 
                   3639: In the first section there are the following variables, which should appear
                   3640: exactly in the order given here. The order and grouping of the variables is
                   3641: mostly historical and has no further meaning.
                   3642: 
                   3643:   * DISTNAME is the basename of the distribution file to be downloaded from the
                   3644:     package's website.
                   3645: 
                   3646:   * PKGNAME is the name of the package, as used by pkgsrc. You only need to
                   3647:     provide it if DISTNAME (which is the default) is not a good name for the
                   3648:     package in pkgsrc. Usually it is the pkgsrc directory name together with
                   3649:     the version number. It must match the regular expression ^[A-Za-z0-9]
                   3650:     [A-Za-z0-9-_.+]*$, that is, it starts with a letter or digit, and contains
                   3651:     only letters, digits, dashes, underscores, dots and plus signs.
                   3652: 
                   3653:   * SVR4_PKGNAME is the name of the package file to create if the PKGNAME isn't
                   3654:     unique on a SVR4 system. The default is PKGNAME, which may be shortened
                   3655:     when you use pkgtools/gensolpkg. Only add SVR4_PKGNAME if PKGNAME does not
                   3656:     produce an unique package name on a SVR4 system. The length of SVR4_PKGNAME
                   3657:     is limited to 5 characters.
                   3658: 
                   3659:   * CATEGORIES is a list of categories which the package fits in. You can
                   3660:     choose any of the top-level directories of pkgsrc for it.
                   3661: 
                   3662:     Currently the following values are available for CATEGORIES. If more than
                   3663:     one is used, they need to be separated by spaces:
                   3664: 
                   3665:     archivers     cross         geography     meta-pkgs     security
                   3666:     audio         databases     graphics      misc          shells
                   3667:     benchmarks    devel         ham           multimedia    sysutils
                   3668:     biology       editors       inputmethod   net           textproc
                   3669:     cad           emulators     lang          news          time
                   3670:     chat          finance       mail          parallel      wm
                   3671:     comms         fonts         math          pkgtools      www
                   3672:     converters    games         mbone         print         x11
                   3673: 
                   3674:   * MASTER_SITES, DYNAMIC_MASTER_SITES, DIST_SUBDIR, EXTRACT_SUFX and DISTFILES
                   3675:     are discussed in detail in Section 16.5, "The fetch phase".
                   3676: 
                   3677: The second section contains information about separately downloaded patches, if
                   3678: any.
                   3679: 
                   3680:   * PATCHFILES: Name(s) of additional files that contain distribution patches.
                   3681:     There is no default. pkgsrc will look for them at PATCH_SITES. They will
                   3682:     automatically be uncompressed before patching if the names end with .gz or
                   3683:     .Z.
                   3684: 
                   3685:   * PATCH_SITES: Primary location(s) for distribution patch files (see
                   3686:     PATCHFILES below) if not found locally.
                   3687: 
                   3688: The third section contains the following variables.
                   3689: 
                   3690:   * MAINTAINER is the email address of the person who feels responsible for
                   3691:     this package, and who is most likely to look at problems or questions
                   3692:     regarding this package which have been reported with send-pr(1). Other
                   3693:     developers should contact the MAINTAINER before making major changes to the
                   3694:     package. When packaging a new program, set MAINTAINER to yourself. If you
                   3695:     really can't maintain the package for future updates, set it to <
                   3696:     pkgsrc-users@NetBSD.org>.
                   3697: 
                   3698:   * HOMEPAGE is a URL where users can find more information about the package.
                   3699: 
                   3700:   * COMMENT is a one-line description of the package (should not include the
                   3701:     package name).
                   3702: 
                   3703: Other variables that affect the build:
                   3704: 
                   3705:   * WRKSRC: The directory where the interesting distribution files of the
                   3706:     package are found. The default is ${WRKDIR}/${DISTNAME}, which works for
                   3707:     most packages.
                   3708: 
                   3709:     If a package doesn't create a subdirectory for itself (most GNU software
                   3710:     does, for instance), but extracts itself in the current directory, you
                   3711:     should set WRKSRC=${WRKDIR}.
                   3712: 
                   3713:     If a package doesn't create a subdirectory with the name of DISTNAME but
                   3714:     some different name, set WRKSRC to point to the proper name in ${WRKDIR},
                   3715:     for example WRKSRC=${WRKDIR}/${DISTNAME}/unix. See lang/tcl and x11/tk for
                   3716:     other examples.
                   3717: 
                   3718:     The name of the working directory created by pkgsrc is taken from the
                   3719:     WRKDIR_BASENAME variable. By default, its value is work. If you want to use
                   3720:     the same pkgsrc tree for building different kinds of binary packages, you
                   3721:     can change the variable according to your needs. Two other variables handle
                   3722:     common cases of setting WRKDIR_BASENAME individually. If OBJHOSTNAME is
1.4       rillig   3723:     defined in mk.conf, the first component of the host's name is attached to
                   3724:     the directory name. If OBJMACHINE is defined, the platform name is
1.1       dsieger  3725:     attached, which might look like work.i386 or work.sparc.
                   3726: 
                   3727: Please pay attention to the following gotchas:
                   3728: 
                   3729:   * Add MANCOMPRESSED if man pages are installed in compressed form by the
                   3730:     package. For packages using BSD-style makefiles which honor MANZ, there is
                   3731:     MANCOMPRESSED_IF_MANZ.
                   3732: 
                   3733:   * Replace /usr/local with "${PREFIX}" in all files (see patches, below).
                   3734: 
1.4       rillig   3735:   * If the package installs any info files, see Section 18.6.7, "Packages
1.1       dsieger  3736:     installing info files".
                   3737: 
                   3738: 10.2. distinfo
                   3739: 
                   3740: The distinfo file contains the message digest, or checksum, of each distfile
                   3741: needed for the package. This ensures that the distfiles retrieved from the
                   3742: Internet have not been corrupted during transfer or altered by a malign force
                   3743: to introduce a security hole. Due to recent rumor about weaknesses of digest
                   3744: algorithms, all distfiles are protected using both SHA1 and RMD160 message
                   3745: digests, as well as the file size.
                   3746: 
                   3747: The distinfo file also contains the checksums for all the patches found in the
                   3748: patches directory (see Section 10.3, "patches/*").
                   3749: 
                   3750: To regenerate the distinfo file, use the make makedistinfo or make mdi command.
                   3751: 
                   3752: Some packages have different sets of distfiles depending on the platform, for
                   3753: example www/navigator). These are kept in the same distinfo file and care
                   3754: should be taken when upgrading such a package to ensure distfile information is
                   3755: not lost.
                   3756: 
                   3757: 10.3. patches/*
                   3758: 
                   3759: Many packages still don't work out-of-the box on the various platforms that are
                   3760: supported by pkgsrc. Therefore, a number of custom patch files are needed to
                   3761: make the package work. These patch files are found in the patches/ directory.
                   3762: 
                   3763: In the patch phase, these patches are applied to the files in WRKSRC directory
                   3764: after extracting them, in alphabetic order, so patch-aa is applied before
                   3765: patch-ab, etc.
                   3766: 
                   3767: 10.3.1. Structure of a single patch file
                   3768: 
                   3769: The patch-* files should be in diff -bu format, and apply without a fuzz to
                   3770: avoid problems. (To force patches to apply with fuzz you can set
                   3771: PATCH_FUZZ_FACTOR=-F2). Furthermore, each patch should contain only changes for
                   3772: a single file, and no file should be patched by more than one patch file. This
                   3773: helps to keep future modifications simple.
                   3774: 
                   3775: Each patch file is structured as follows: In the first line, there is the RCS
                   3776: Id of the patch itself. The second line should be empty for aesthetic reasons.
                   3777: After that, there should be a comment for each change that the patch does.
                   3778: There are a number of standard cases:
                   3779: 
                   3780:   * Patches that replace the == operator for test(1) with = in shell scripts
                   3781:     should contain a reference to , to avoid redundant explanations.
                   3782: 
                   3783:   * Patches for commonly known vulnerabilities should mention the vulnerability
                   3784:     ID (CAN, CVE).
                   3785: 
                   3786:   * Patches that change source code should mention the platform and other
                   3787:     environment (for example, the compiler) that the patch is needed for.
                   3788: 
                   3789: In all other cases, the patch should be commented so that any developer who
                   3790: knows the code of the application can make some use of the patch. Special care
                   3791: should be taken for the upstream developers, since we generally want that they
                   3792: accept our patches, so we have less work in the future.
                   3793: 
                   3794: 10.3.2. Creating patch files
                   3795: 
                   3796: One important thing to mention is to pay attention that no RCS IDs get stored
                   3797: in the patch files, as these will cause problems when later checked into the
                   3798: NetBSD CVS tree. Use the pkgdiff command from the pkgtools/pkgdiff package to
                   3799: avoid these problems.
                   3800: 
                   3801: For even more automation, we recommend using mkpatches from the same package to
                   3802: make a whole set of patches. You just have to backup files before you edit them
                   3803: to filename.orig, e.g. with cp -p filename filename.orig or, easier, by using
                   3804: pkgvi again from the same package. If you upgrade a package this way, you can
                   3805: easily compare the new set of patches with the previously existing one with
                   3806: patchdiff. Copy the patches you want to use or update from the work/.newpatches
                   3807: directory to patches/.
                   3808: 
                   3809: When you have finished a package, remember to generate the checksums for the
                   3810: patch files by using the make makepatchsum command, see Section 10.2,
                   3811: "distinfo".
                   3812: 
                   3813: When adding a patch that corrects a problem in the distfile (rather than e.g.
                   3814: enforcing pkgsrc's view of where man pages should go), send the patch as a bug
                   3815: report to the maintainer. This benefits non-pkgsrc users of the package, and
                   3816: usually makes it possible to remove the patch in future version.
                   3817: 
1.2       rillig   3818: The file names of the patch files are usually of the form patch-[a-z][a-z].
                   3819: 
1.1       dsieger  3820: 10.3.3. Sources where the patch files come from
                   3821: 
                   3822: If you want to share patches between multiple packages in pkgsrc, e.g. because
                   3823: they use the same distfiles, set PATCHDIR to the path where the patch files can
                   3824: be found, e.g.:
                   3825: 
                   3826: PATCHDIR= ${.CURDIR}/../xemacs/patches
                   3827: 
                   3828: Patch files that are distributed by the author or other maintainers can be
                   3829: listed in PATCHFILES.
                   3830: 
                   3831: If it is desired to store any patches that should not be committed into pkgsrc,
                   3832: they can be kept outside the pkgsrc tree in the $LOCALPATCHES directory. The
                   3833: directory tree there is expected to have the same "category/package" structure
                   3834: as pkgsrc, and patches are expected to be stored inside these dirs (also known
                   3835: as $LOCALPATCHES/$PKGPATH). For example, if you want to keep a private patch
                   3836: for pkgsrc/graphics/png, keep it in $LOCALPATCHES/graphics/png/mypatch. All
                   3837: files in the named directory are expected to be patch files, and they are
                   3838: applied after pkgsrc patches are applied.
                   3839: 
                   3840: 10.3.4. Patching guidelines
                   3841: 
                   3842: When fixing a portability issue in the code do not use preprocessor magic to
                   3843: check for the current operating system nor platform. Doing so hurts portability
                   3844: to other platforms because the OS-specific details are not abstracted
                   3845: appropriately.
                   3846: 
                   3847: The general rule to follow is: instead of checking for the operating system the
                   3848: application is being built on, check for the specific features you need. For
                   3849: example, instead of assuming that kqueue is available under NetBSD and using
                   3850: the __NetBSD__ macro to conditionalize kqueue support, add a check that detects
                   3851: kqueue itself ? yes, this generally involves patching the configure script.
                   3852: There is absolutely nothing that prevents some OSes from adopting interfaces
                   3853: from other OSes (e.g. Linux implementing kqueue), something that the above
                   3854: checks cannot take into account.
                   3855: 
                   3856: Of course, checking for features generally involves more work on the
                   3857: developer's side, but the resulting changes are cleaner and there are chances
                   3858: they will work on many other platforms. Not to mention that there are higher
                   3859: chances of being later integrated into the mainstream sources. Remember: It
                   3860: doesn't work unless it is right!
                   3861: 
                   3862: Some typical examples:
                   3863: 
                   3864: Table 10.1. Patching examples
                   3865: 
                   3866: +-------------------------------------------------------------------------------------------+
                   3867: |  Where  |        Incorrect         |                       Correct                        |
                   3868: |---------+--------------------------+------------------------------------------------------|
                   3869: |         |case ${target_os} in      |                                                      |
                   3870: |configure|netbsd*) have_kvm=yes ;;  |AC_CHECK_LIB(kvm, kvm_open, have_kvm=yes, have_kvm=no)|
                   3871: |script   |*)       have_kvm=no  ;;  |                                                      |
                   3872: |         |esac                      |                                                      |
                   3873: |---------+--------------------------+------------------------------------------------------|
1.2       rillig   3874: |C source |#if defined(__NetBSD__)   |#if defined(HAVE_SYS_EVENT_H)                         |
                   3875: |file     |#  include <sys/event.h>  |#  include <sys/event.h>                              |
                   3876: |         |#endif                    |#endif                                                |
1.1       dsieger  3877: |---------+--------------------------+------------------------------------------------------|
                   3878: |         |int                       |int                                                   |
                   3879: |         |monitor_file(...)         |monitor_file(...)                                     |
                   3880: |         |{                         |{                                                     |
                   3881: |         |#if defined(__NetBSD__)   |#if defined(HAVE_KQUEUE)                              |
                   3882: |C source |        int fd = kqueue();|        int fd = kqueue();                            |
                   3883: |file     |        ...               |        ...                                           |
                   3884: |         |#else                     |#else                                                 |
                   3885: |         |        ...               |        ...                                           |
                   3886: |         |#endif                    |#endif                                                |
                   3887: |         |}                         |}                                                     |
                   3888: +-------------------------------------------------------------------------------------------+
                   3889: 
                   3890: 
                   3891: For more information, please read the Making packager-friendly software article
                   3892: (part 1, part 2). It summarizes multiple details on how to make software easier
                   3893: to package; all the suggestions in it were collected from our experience in
                   3894: pkgsrc work, so they are possibly helpful when creating patches too.
                   3895: 
                   3896: 10.3.5. Feedback to the author
                   3897: 
                   3898: Always, always, always feed back any portability fixes or improvements you do
                   3899: to a package to the mainstream developers. This is the only way to get their
                   3900: attention on portability issues and to ensure that future versions can be built
                   3901: out-of-the box on NetBSD. Furthermore, any user that gets newer distfiles will
                   3902: get the fixes straight from the packaged code.
                   3903: 
                   3904: This generally involves cleaning up the patches (because sometimes the patches
                   3905: that are added to pkgsrc are quick hacks), filling bug reports in the
                   3906: appropriate trackers for the projects and working with the mainstream authors
                   3907: to accept your changes. It is extremely important that you do it so that the
                   3908: packages in pkgsrc are kept simple and thus further changes can be done without
                   3909: much hassle.
                   3910: 
                   3911: Support the idea of free software!
                   3912: 
                   3913: 10.4. Other mandatory files
                   3914: 
                   3915: DESCR
                   3916: 
                   3917:     A multi-line description of the piece of software. This should include any
                   3918:     credits where they are due. Please bear in mind that others do not share
                   3919:     your sense of humour (or spelling idiosyncrasies), and that others will
                   3920:     read everything that you write here.
                   3921: 
                   3922: PLIST
                   3923: 
                   3924:     This file governs the files that are installed on your system: all the
                   3925:     binaries, manual pages, etc. There are other directives which may be
                   3926:     entered in this file, to control the creation and deletion of directories,
                   3927:     and the location of inserted files. See Chapter 12, PLIST issues for more
                   3928:     information.
                   3929: 
                   3930: 10.5. Optional files
                   3931: 
                   3932: 10.5.1. Files affecting the binary package
                   3933: 
                   3934: INSTALL
                   3935: 
                   3936:     This shell script is invoked twice by pkg_add(1). First time after package
                   3937:     extraction and before files are moved in place, the second time after the
                   3938:     files to install are moved in place. This can be used to do any custom
                   3939:     procedures not possible with @exec commands in PLIST. See pkg_add(1) and
                   3940:     pkg_create(1) for more information. See also Section 14.1, "Files and
                   3941:     directories outside the installation prefix".
                   3942: 
                   3943: DEINSTALL
                   3944: 
                   3945:     This script is executed before and after any files are removed. It is this
                   3946:     script's responsibility to clean up any additional messy details around the
                   3947:     package's installation, since all pkg_delete knows is how to delete the
                   3948:     files created in the original distribution. See pkg_delete(1) and
                   3949:     pkg_create(1) for more information.
                   3950: 
                   3951: MESSAGE
                   3952: 
                   3953:     This file is displayed after installation of the package. Useful for things
                   3954:     like legal notices on almost-free software and hints for updating config
                   3955:     files after installing modules for apache, PHP etc. Please note that you
                   3956:     can modify variables in it easily by using MESSAGE_SUBST in the package's
                   3957:     Makefile:
                   3958: 
                   3959:     MESSAGE_SUBST+=  SOMEVAR="somevalue"
                   3960: 
                   3961:     replaces "${SOMEVAR}" with "somevalue" in MESSAGE. By default, substitution
                   3962:     is performed for PKGNAME, PKGBASE, PREFIX, LOCALBASE, X11PREFIX, X11BASE,
                   3963:     PKG_SYSCONFDIR, ROOT_GROUP, and ROOT_GROUP.
                   3964: 
                   3965:     You can display a different or additional files by setting the MESSAGE_SRC
                   3966:     variable. Its default is MESSAGE, if the file exists.
                   3967: 
                   3968: ALTERNATIVES
                   3969: 
                   3970:     FIXME: There is no documentation on the alternatives framework.
                   3971: 
                   3972: 10.5.2. Files affecting the build process
                   3973: 
                   3974: Makefile.common
                   3975: 
                   3976:     This file contains arbitrary things that could also go into a Makefile, but
                   3977:     its purpose is to be used by more than one package. This file should only
                   3978:     be used when the packages that will use the file are known in advance. For
                   3979:     other purposes it is often better to write a *.mk file and give it a good
                   3980:     name that describes what it does.
                   3981: 
                   3982: buildlink3.mk
                   3983: 
                   3984:     This file contains the dependency information for the buildlink3 framework
                   3985:     (see Chapter 13, Buildlink methodology).
                   3986: 
                   3987: hacks.mk
                   3988: 
                   3989:     This file contains workarounds for compiler bugs and similar things. It is
                   3990:     included automatically by the pkgsrc infrastructure, so you don't need an
                   3991:     extra .include line for it.
                   3992: 
                   3993: options.mk
                   3994: 
                   3995:     This file contains the code for the package-specific options (see
                   3996:     Chapter 15, Options handling) that can be selected by the user. If a
                   3997:     package has only one or two options, it is equally acceptable to put the
                   3998:     code directly into the Makefile.
                   3999: 
                   4000: 10.5.3. Files affecting nothing at all
                   4001: 
                   4002: README*
                   4003: 
                   4004:     These files do not take place in the creation of a package and thus are
                   4005:     purely informative to the package developer.
                   4006: 
                   4007: TODO
                   4008: 
                   4009:     This file contains things that need to be done to make the package even
                   4010:     better.
                   4011: 
                   4012: 10.6. work*
                   4013: 
                   4014: When you type make, the distribution files are unpacked into the directory
                   4015: denoted by WRKDIR. It can be removed by running make clean. Besides the
                   4016: sources, this directory is also used to keep various timestamp files. The
                   4017: directory gets removed completely on clean. The default is ${.CURDIR}/work or $
                   4018: {.CURDIR}/work.${MACHINE_ARCH} if OBJMACHINE is set.
                   4019: 
                   4020: 10.7. files/*
                   4021: 
                   4022: If you have any files that you wish to be placed in the package prior to
                   4023: configuration or building, you could place these files here and use a ${CP}
                   4024: command in the "pre-configure" target to achieve this. Alternatively, you could
                   4025: simply diff the file against /dev/null and use the patch mechanism to manage
                   4026: the creation of this file.
                   4027: 
                   4028: If you want to share files in this way with other packages, set the FILESDIR
                   4029: variable to point to the other package's files directory, e.g.:
                   4030: 
                   4031: FILESDIR=${.CURDIR}/../xemacs/files
                   4032: 
                   4033: Chapter 11. Programming in Makefiles
                   4034: 
                   4035: Table of Contents
                   4036: 
                   4037: 11.1. Caveats
                   4038: 11.2. Makefile variables
                   4039: 
                   4040:     11.2.1. Naming conventions
                   4041: 
                   4042: 11.3. Code snippets
                   4043: 
                   4044:     11.3.1. Adding things to a list
                   4045:     11.3.2. Converting an internal list into an external list
                   4046:     11.3.3. Passing variables to a shell command
                   4047:     11.3.4. Quoting guideline
                   4048:     11.3.5. Workaround for a bug in BSD Make
                   4049: 
                   4050: Pkgsrc consists of many Makefile fragments, each of which forms a well-defined
                   4051: part of the pkgsrc system. Using the make(1) system as a programming language
                   4052: for a big system like pkgsrc requires some discipline to keep the code correct
                   4053: and understandable.
                   4054: 
                   4055: The basic ingredients for Makefile programming are variables (which are
                   4056: actually macros) and shell commands. Among these shell commands may even be
                   4057: more complex ones like awk(1) programs. To make sure that every shell command
                   4058: runs as intended it is necessary to quote all variables correctly when they are
                   4059: used.
                   4060: 
                   4061: This chapter describes some patterns, that appear quite often in Makefiles,
                   4062: including the pitfalls that come along with them.
                   4063: 
                   4064: 11.1. Caveats
                   4065: 
                   4066:   * When you are creating a file as a target of a rule, always write the data
                   4067:     to a temporary file first and finally rename that file. Otherwise there
                   4068:     might occur an error in the middle of generating the file, and when the
                   4069:     user runs make(1) for the second time, the file exists and will not be
                   4070:     regenerated properly. Example:
                   4071: 
                   4072:     wrong:
                   4073:             @echo "line 1" > ${.TARGET}
                   4074:             @echo "line 2" >> ${.TARGET}
                   4075:             @false
                   4076: 
                   4077:     correct:
                   4078:             @echo "line 1" > ${.TARGET}.tmp
                   4079:             @echo "line 2" >> ${.TARGET}.tmp
                   4080:             @false
                   4081:             @mv ${.TARGET}.tmp ${.TARGET}
                   4082: 
                   4083:     When you run make wrong twice, the file wrong will exist, although there
                   4084:     was an error message in the first run. On the other hand, running make
                   4085:     correct gives an error message twice, as expected.
                   4086: 
                   4087:     You might remember that make(1) sometimes removes ${.TARGET} in case of
                   4088:     error, but this only happens when it is interrupted, for example by
                   4089:     pressing ^C. This does not happen when one of the commands fails (like
                   4090:     false(1) above).
                   4091: 
                   4092: 11.2. Makefile variables
                   4093: 
                   4094: Makefile variables contain strings that can be processed using the five
                   4095: operators ``='', ``+='', ``?='', ``:='', and ``!='', which are described in the
                   4096: make(1) man page.
                   4097: 
                   4098: When a variable's value is parsed from a Makefile, the hash character ``#'' and
                   4099: the backslash character ``\'' are handled specially. If a backslash is followed
                   4100: by a newline, any whitespace immediately in front of the backslash, the
                   4101: backslash, the newline, and any whitespace immediately behind the newline are
                   4102: replaced with a single space. A backslash character and an immediately
                   4103: following hash character are replaced with a single hash character. Otherwise,
                   4104: the backslash is passed as is. In a variable assignment, any hash character
                   4105: that is not preceded by a backslash starts a comment that continues upto the
                   4106: end of the logical line.
                   4107: 
                   4108: Note: Because of this parsing algorithm the only way to create a variable
                   4109: consisting of a single backslash is using the ``!='' operator, for example:
                   4110: BACKSLASH!=echo "\\".
                   4111: 
                   4112: So far for defining variables. The other thing you can do with variables is
                   4113: evaluating them. A variable is evaluated when it is part of the right side of
                   4114: the ``:='' or the ``!='' operator, or directly before executing a shell command
                   4115: which the variable is part of. In all other cases, make(1) performs lazy
                   4116: evaluation, that is, variables are not evaluated until there's no other way.
                   4117: The ``modifiers'' mentioned in the man page also evaluate the variable.
                   4118: 
                   4119: Some of the modifiers split the string into words and then operate on the
                   4120: words, others operate on the string as a whole. When a string is split into
                   4121: words, it is split as you would expect it from sh(1).
                   4122: 
                   4123: No rule without exception?the .for loop does not follow the shell quoting rules
                   4124: but splits at sequences of whitespace.
                   4125: 
                   4126: There are several types of variables that should be handled differently.
                   4127: Strings and two types of lists.
                   4128: 
                   4129:   * Strings can contain arbitrary characters. Nevertheless, you should restrict
                   4130:     yourself to only using printable characters. Examples are PREFIX and
                   4131:     COMMENT.
                   4132: 
                   4133:   * Internal lists are lists that are never exported to any shell command.
                   4134:     Their elements are separated by whitespace. Therefore, the elements
                   4135:     themselves cannot have embedded whitespace. Any other characters are
                   4136:     allowed. Internal lists can be used in .for loops. Examples are DEPENDS and
                   4137:     BUILD_DEPENDS.
                   4138: 
                   4139:   * External lists are lists that may be exported to a shell command. Their
                   4140:     elements can contain any characters, including whitespace. That's why they
                   4141:     cannot be used in .for loops. Examples are DISTFILES and MASTER_SITES.
                   4142: 
                   4143: 11.2.1. Naming conventions
                   4144: 
                   4145:   * All variable names starting with an underscore are reserved for use by the
                   4146:     pkgsrc infrastructure. They shall not be used by package Makefiles.
                   4147: 
                   4148:   * In .for loops you should use lowercase variable names for the iteration
                   4149:     variables.
                   4150: 
                   4151:   * All list variables should have a ``plural'' name, e.g. PKG_OPTIONS or
                   4152:     DISTFILES.
                   4153: 
                   4154: 11.3. Code snippets
                   4155: 
                   4156: This section presents you with some code snippets you should use in your own
                   4157: code. If you don't find anything appropriate here, you should test your code
                   4158: and add it here.
                   4159: 
                   4160: 11.3.1. Adding things to a list
                   4161: 
                   4162: STRING=                 foo * bar `date`
                   4163: INT_LIST=               # empty
                   4164: ANOTHER_INT_LIST=       apache-[0-9]*:../../www/apache
                   4165: EXT_LIST=               # empty
                   4166: ANOTHER_EXT_LIST=       a=b c=d
                   4167: 
                   4168: INT_LIST+=              ${STRING}               # 1
                   4169: INT_LIST+=              ${ANOTHER_INT_LIST}     # 2
                   4170: EXT_LIST+=              ${STRING:Q}             # 3
                   4171: EXT_LIST+=              ${ANOTHER_EXT_LIST}     # 4
                   4172: 
                   4173: When you add a string to an external list (example 3), it must be quoted. In
                   4174: all other cases, you must not add a quoting level. You must not merge internal
                   4175: and external lists, unless you are sure that all entries are correctly
                   4176: interpreted in both lists.
                   4177: 
                   4178: 11.3.2. Converting an internal list into an external list
                   4179: 
                   4180: EXT_LIST=       # empty
                   4181: .for i in ${INT_LIST}
                   4182: EXT_LIST+=      ${i:Q}""
                   4183: .endfor
                   4184: 
                   4185: This code converts the internal list INT_LIST into the external list EXT_LIST.
                   4186: As the elements of an internal list are unquoted they must be quoted here. The
                   4187: reason for appending "" is explained below.
                   4188: 
                   4189: 11.3.3. Passing variables to a shell command
                   4190: 
                   4191: Sometimes you may want to print an arbitrary string. There are many ways to get
                   4192: it wrong and only few that can handle every nastiness.
                   4193: 
                   4194: STRING=         foo bar <    > * `date` $$HOME ' "
                   4195: EXT_LIST=       string=${STRING:Q} x=second\ item
                   4196: 
                   4197: all:
                   4198:         echo ${STRING}                  # 1
                   4199:         echo "${STRING}"                # 2
                   4200:         echo "${STRING:Q}"              # 3
                   4201:         echo ${STRING:Q}                # 4
                   4202:         echo x${STRING:Q} | sed 1s,.,,  # 5
                   4203:         printf "%s\\n" ${STRING:Q}""    # 6
                   4204:         env ${EXT_LIST} /bin/sh -c 'echo "$$string"; echo "$$x"'
                   4205: 
                   4206: Example 1 leads to a syntax error in the shell, as the characters are just
                   4207: copied.
                   4208: 
                   4209: Example 2 leads to a syntax error too, and if you leave out the last "
                   4210: character from ${STRING}, date(1) will be executed. The $HOME shell variable
                   4211: would be evaluated, too.
                   4212: 
                   4213: Example 3 outputs each space character preceded by a backslash (or not),
                   4214: depending on the implementation of the echo(1) command.
                   4215: 
                   4216: Example 4 handles correctly every string that does not start with a dash. In
                   4217: that case, the result depends on the implementation of the echo(1) command. As
                   4218: long as you can guarantee that your input does not start with a dash, this form
                   4219: is appropriate.
                   4220: 
                   4221: Example 5 handles even the case of a leading dash correctly.
                   4222: 
                   4223: Example 6 also works with every string and is the light-weight solution, since
                   4224: it does not involve a pipe, which has its own problems.
                   4225: 
                   4226: The EXT_LIST does not need to be quoted because the quoting has already been
                   4227: done when adding elements to the list.
                   4228: 
                   4229: As internal lists shall not be passed to the shell, there is no example for it.
                   4230: 
                   4231: 11.3.4. Quoting guideline
                   4232: 
                   4233: There are many possible sources of wrongly quoted variables. This section lists
                   4234: some of the commonly known ones.
                   4235: 
                   4236:   * Whenever you use the value of a list, think about what happens to leading
                   4237:     or trailing whitespace. If the list is a well-formed shell expression, you
                   4238:     can apply the :M* modifier to strip leading and trailing whitespace from
                   4239:     each word. The :M operator first splits its argument according to the rules
                   4240:     of the shell, and then creates a new list consisting of all words that
                   4241:     match the shell glob expression *, that is: all. One class of situations
                   4242:     where this is needed is when adding a variable like CPPFLAGS to
                   4243:     CONFIGURE_ARGS. If the configure script invokes other configure scripts, it
                   4244:     strips the leading and trailing whitespace from the variable and then
                   4245:     passes it to the other configure scripts. But these configure scripts
                   4246:     expect the (child) CPPFLAGS variable to be the same as the parent CPPFLAGS.
                   4247:     That's why we better pass the CPPFLAGS value properly trimmed. And here is
                   4248:     how we do it:
                   4249: 
                   4250:     CPPFLAGS=               # empty
                   4251:     CPPFLAGS+=              -Wundef -DPREFIX=\"${PREFIX:Q}\"
                   4252:     CPPFLAGS+=              ${MY_CPPFLAGS}
                   4253: 
                   4254:     CONFIGURE_ARGS+=        CPPFLAGS=${CPPFLAGS:M*:Q}
                   4255: 
                   4256:     all:
                   4257:             echo x${CPPFLAGS:Q}x            # leading and trailing whitespace
                   4258:             echo x${CONFIGURE_ARGS}x        # properly trimmed
                   4259: 
                   4260:   * The example above contains one bug: The ${PREFIX} is a properly quoted
                   4261:     shell expression, but there is the C compiler after it, which also expects
                   4262:     a properly quoted string (this time in C syntax). The version above is
                   4263:     therefore only correct if ${PREFIX} does not have embedded backslashes or
                   4264:     double quotes. If you want to allow these, you have to add another layer of
                   4265:     quoting to each variable that is used as a C string literal. You cannot use
                   4266:     the :Q operator for it, as this operator only works for the shell.
                   4267: 
                   4268:   * Whenever a variable can be empty, the :Q operator can have surprising
                   4269:     results. Here are two completely different cases which can be solved with
                   4270:     the same trick.
                   4271: 
                   4272:     EMPTY=                  # empty
                   4273:     empty_test:
                   4274:             for i in a ${EMPTY:Q} c; do \
                   4275:                 echo "$$i"; \
                   4276:             done
                   4277: 
                   4278:     for_test:
                   4279:     .for i in a:\ a:\test.txt
                   4280:             echo ${i:Q}
                   4281:             echo "foo"
                   4282:     .endfor
                   4283: 
                   4284:     The first example will only print two of the three lines we might have
                   4285:     expected. This is because ${EMPTY:Q} expands to the empty string, which the
                   4286:     shell cannot see. The workaround is to write ${EMPTY:Q}"". This pattern can
                   4287:     be often found as ${TEST} -z ${VAR:Q} or as ${TEST} -f ${FNAME:Q} (both of
                   4288:     these are wrong).
                   4289: 
                   4290:     The second example will only print three lines instead of four. The first
                   4291:     line looks like a:\ echo foo. This is because the backslash of the value a:
                   4292:     \ is interpreted as a line-continuation by make(1), which makes the second
                   4293:     line the arguments of the echo(1) command from the first line. To avoid
                   4294:     this, write ${i:Q}"".
                   4295: 
                   4296: 11.3.5. Workaround for a bug in BSD Make
                   4297: 
                   4298: The pkgsrc bmake program does not handle the following assignment correctly. In
                   4299: case _othervar_ contains a ``-'' character, one of the closing braces is
                   4300: included in ${VAR} after this code executes.
                   4301: 
                   4302: VAR:=   ${VAR:N${_othervar_:C/-//}}
                   4303: 
                   4304: For a more complex code snippet and a workaround, see the package regress/
                   4305: make-quoting, testcase bug1.
                   4306: 
                   4307: Chapter 12. PLIST issues
                   4308: 
                   4309: Table of Contents
                   4310: 
                   4311: 12.1. RCS ID
                   4312: 12.2. Semi-automatic PLIST generation
                   4313: 12.3. Tweaking output of make print-PLIST
                   4314: 12.4. Variable substitution in PLIST
                   4315: 12.5. Man page compression
                   4316: 12.6. Changing PLIST source with PLIST_SRC
                   4317: 12.7. Platform-specific and differing PLISTs
                   4318: 12.8. Sharing directories between packages
                   4319: 
                   4320: The PLIST file contains a package's "packing list", i.e. a list of files that
                   4321: belong to the package (relative to the ${PREFIX} directory it's been installed
                   4322: in) plus some additional statements - see the pkg_create(1) man page for a full
                   4323: list. This chapter addresses some issues that need attention when dealing with
                   4324: the PLIST file (or files, see below!).
                   4325: 
                   4326: 12.1. RCS ID
                   4327: 
                   4328: Be sure to add a RCS ID line as the first thing in any PLIST file you write:
                   4329: 
1.2       rillig   4330: @comment $NetBSD$
1.1       dsieger  4331: 
                   4332: 
                   4333: 12.2. Semi-automatic PLIST generation
                   4334: 
                   4335: You can use the make print-PLIST command to output a PLIST that matches any new
                   4336: files since the package was extracted. See Section 16.17, "Other helpful
                   4337: targets" for more information on this target.
                   4338: 
                   4339: 12.3. Tweaking output of make print-PLIST
                   4340: 
                   4341: If you have used any of the *-dirs packages, as explained in Section 12.8,
                   4342: "Sharing directories between packages", you may have noticed that make
                   4343: print-PLIST outputs a set of @comments instead of real @dirrm lines. You can
                   4344: also do this for specific directories and files, so that the results of that
                   4345: command are very close to reality. This helps a lot during the update of
                   4346: packages.
                   4347: 
                   4348: The PRINT_PLIST_AWK variable takes a set of AWK patterns and actions that are
                   4349: used to filter the output of print-PLIST. You can append any chunk of AWK
                   4350: scripting you like to it, but be careful with quoting.
                   4351: 
                   4352: For example, to get all files inside the libdata/foo directory removed from the
                   4353: resulting PLIST:
                   4354: 
                   4355: PRINT_PLIST_AWK+=       /^libdata\/foo/ { next; }
                   4356: 
                   4357: 
                   4358: And to get all the @dirrm lines referring to a specific (shared) directory
                   4359: converted to @comments:
                   4360: 
                   4361: PRINT_PLIST_AWK+=       /^@dirrm share\/specific/ { print "@comment " $$0; next; }
                   4362: 
                   4363: 
                   4364: 12.4. Variable substitution in PLIST
                   4365: 
                   4366: A number of variables are substituted automatically in PLISTs when a package is
                   4367: installed on a system. This includes the following variables:
                   4368: 
                   4369: ${MACHINE_ARCH}, ${MACHINE_GNU_ARCH}
                   4370: 
                   4371:     Some packages like emacs and perl embed information about which
                   4372:     architecture they were built on into the pathnames where they install their
                   4373:     files. To handle this case, PLIST will be preprocessed before actually
                   4374:     used, and the symbol "${MACHINE_ARCH}" will be replaced by what uname -p
                   4375:     gives. The same is done if the string ${MACHINE_GNU_ARCH} is embedded in
                   4376:     PLIST somewhere - use this on packages that have GNU autoconf-created
                   4377:     configure scripts.
                   4378: 
                   4379:     Legacy note
                   4380: 
                   4381:     There used to be a symbol "$ARCH" that was replaced by the output of uname
                   4382:     -m, but that's no longer supported and has been removed.
                   4383: 
                   4384: ${OPSYS}, ${LOWER_OPSYS}, ${OS_VERSION}
                   4385: 
                   4386:     Some packages want to embed the OS name and version into some paths. To do
                   4387:     this, use these variables in the PLIST:
                   4388: 
                   4389:       * ${OPSYS} - output of "uname -s"
                   4390: 
                   4391:       * ${LOWER_OPSYS} - lowercase common name (eg. "solaris")
                   4392: 
                   4393:       * ${OS_VERSION} - "uname -r"
                   4394: 
                   4395: For a complete list of values which are replaced by default, please look in
                   4396: bsd.pkg.mk (and search for PLIST_SUBST).
                   4397: 
                   4398: If you want to change other variables not listed above, you can add variables
                   4399: and their expansions to this variable in the following way, similar to
                   4400: MESSAGE_SUBST (see Section 10.5, "Optional files"):
                   4401: 
                   4402: PLIST_SUBST+=   SOMEVAR="somevalue"
                   4403: 
                   4404: 
                   4405: This replaces all occurrences of "${SOMEVAR}" in the PLIST with "somevalue".
                   4406: 
                   4407: 12.5. Man page compression
                   4408: 
                   4409: Man pages should be installed in compressed form if MANZ is set (in
                   4410: bsd.own.mk), and uncompressed otherwise. To handle this in the PLIST file, the
                   4411: suffix ".gz" is appended/removed automatically for man pages according to MANZ
                   4412: and MANCOMPRESSED being set or not, see above for details. This modification of
                   4413: the PLIST file is done on a copy of it, not PLIST itself.
                   4414: 
                   4415: 12.6. Changing PLIST source with PLIST_SRC
                   4416: 
                   4417: To use one or more files as source for the PLIST used in generating the binary
                   4418: package, set the variable PLIST_SRC to the names of that file(s). The files are
                   4419: later concatenated using cat(1), and the order of things is important. The
                   4420: default for PLIST_SRC is ${PKGDIR}/PLIST.
                   4421: 
                   4422: 12.7. Platform-specific and differing PLISTs
                   4423: 
                   4424: Some packages decide to install a different set of files based on the operating
                   4425: system being used. These differences can be automatically handled by using the
                   4426: following files:
                   4427: 
                   4428:   * PLIST.common
                   4429: 
                   4430:   * PLIST.${OPSYS}
                   4431: 
                   4432:   * PLIST.${MACHINE_ARCH}
                   4433: 
                   4434:   * PLIST.${OPSYS}-${MACHINE_ARCH}
                   4435: 
                   4436:   * PLIST.common_end
                   4437: 
                   4438: 12.8. Sharing directories between packages
                   4439: 
                   4440: A "shared directory" is a directory where multiple (and unrelated) packages
                   4441: install files. These directories are problematic because you have to add
                   4442: special tricks in the PLIST to conditionally remove them, or have some
                   4443: centralized package handle them.
                   4444: 
                   4445: Within pkgsrc, you'll find both approaches. If a directory is shared by a few
                   4446: unrelated packages, it's often not worth to add an extra package to remove it.
                   4447: Therefore, one simply does:
                   4448: 
                   4449: @unexec ${RMDIR} %D/path/to/shared/directory 2>/dev/null || ${TRUE}
                   4450: 
                   4451: 
                   4452: in the PLISTs of all affected packages, instead of the regular "@dirrm" line.
                   4453: 
                   4454: However, if the directory is shared across many packages, two different
                   4455: solutions are available:
                   4456: 
                   4457:  1. If the packages have a common dependency, the directory can be removed in
                   4458:     that. For example, see textproc/scrollkeeper, which removes the shared
                   4459:     directory share/omf.
                   4460: 
                   4461:  2. If the packages using the directory are not related at all (they have no
                   4462:     common dependencies), a *-dirs package is used.
                   4463: 
                   4464: From now on, we'll discuss the second solution. To get an idea of the *-dirs
                   4465: packages available, issue:
                   4466: 
                   4467: % cd .../pkgsrc
                   4468: % ls -d */*-dirs
                   4469: 
                   4470: 
                   4471: Their use from other packages is very simple. The USE_DIRS variable takes a
                   4472: list of package names (without the "-dirs" part) together with the required
                   4473: version number (always pick the latest one when writing new packages).
                   4474: 
                   4475: For example, if a package installs files under share/applications, it should
                   4476: have the following line in it:
                   4477: 
                   4478: USE_DIRS+=      xdg-1.1
                   4479: 
                   4480: 
                   4481: After regenerating the PLIST using make print-PLIST, you should get the right
                   4482: (commented out) lines.
                   4483: 
                   4484: Note that even if your package is using $X11BASE, it must not depend on the
                   4485: *-x11-dirs packages. Just specify the name without that part and pkgsrc (in
                   4486: particular, mk/dirs.mk) will take care of it.
                   4487: 
                   4488: Chapter 13. Buildlink methodology
                   4489: 
                   4490: Table of Contents
                   4491: 
                   4492: 13.1. Converting packages to use buildlink3
                   4493: 13.2. Writing buildlink3.mk files
                   4494: 
                   4495:     13.2.1. Anatomy of a buildlink3.mk file
                   4496:     13.2.2. Updating BUILDLINK_API_DEPENDS.pkg in buildlink3.mk files
                   4497: 
                   4498: 13.3. Writing builtin.mk files
                   4499: 
                   4500:     13.3.1. Anatomy of a builtin.mk file
                   4501:     13.3.2. Global preferences for native or pkgsrc software
                   4502: 
                   4503: Buildlink is a framework in pkgsrc that controls what headers and libraries are
                   4504: seen by a package's configure and build processes. This is implemented in a two
                   4505: step process:
                   4506: 
                   4507:  1. Symlink headers and libraries for dependencies into BUILDLINK_DIR, which by
                   4508:     default is a subdirectory of WRKDIR.
                   4509: 
                   4510:  2. Create wrapper scripts that are used in place of the normal compiler tools
                   4511:     that translate -I${LOCALBASE}/include and -L${LOCALBASE}/lib into
                   4512:     references to BUILDLINK_DIR. The wrapper scripts also make native compiler
                   4513:     on some operating systems look like GCC, so that packages that expect GCC
                   4514:     won't require modifications to build with those native compilers.
                   4515: 
                   4516: This normalizes the environment in which a package is built so that the package
                   4517: may be built consistently despite what other software may be installed. Please
                   4518: note that the normal system header and library paths, e.g. /usr/include, /usr/
                   4519: lib, etc., are always searched -- buildlink3 is designed to insulate the
                   4520: package build from non-system-supplied software.
                   4521: 
                   4522: 13.1. Converting packages to use buildlink3
                   4523: 
                   4524: The process of converting packages to use the buildlink3 framework
                   4525: ("bl3ifying") is fairly straightforward. The things to keep in mind are:
                   4526: 
                   4527:  1. Ensure that the build always calls the wrapper scripts instead of the
                   4528:     actual toolchain. Some packages are tricky, and the only way to know for
                   4529:     sure is the check ${WRKDIR}/.work.log to see if the wrappers are being
                   4530:     invoked.
                   4531: 
                   4532:  2. Don't override PREFIX from within the package Makefile, e.g. Java VMs,
                   4533:     standalone shells, etc., because the code to symlink files into $
                   4534:     {BUILDLINK_DIR} looks for files relative to "pkg_info -qp pkgname".
                   4535: 
                   4536:  3. Remember that only the buildlink3.mk files that you list in a package's
                   4537:     Makefile are added as dependencies for that package.
                   4538: 
                   4539: If a dependency on a particular package is required for its libraries and
                   4540: headers, then we replace:
                   4541: 
                   4542: DEPENDS+=       foo>=1.1.0:../../category/foo
                   4543: 
                   4544: with
                   4545: 
                   4546: .include "../../category/foo/buildlink3.mk"
                   4547: 
                   4548: The buildlink3.mk files usually define the required dependencies. If you need a
                   4549: newer version of the dependency when using buildlink3.mk files, then you can
                   4550: define it in your Makefile; for example:
                   4551: 
                   4552: BUILDLINK_API_DEPENDS.foo+=   foo>=1.1.0
                   4553: .include "../../category/foo/buildlink3.mk"
                   4554: 
                   4555: There are several buildlink3.mk files in pkgsrc/mk that handle special package
                   4556: issues:
                   4557: 
                   4558:   * bdb.buildlink3.mk chooses either the native or a pkgsrc Berkeley DB
                   4559:     implementation based on the values of BDB_ACCEPTED and BDB_DEFAULT.
                   4560: 
                   4561:   * curses.buildlink3.mk: If the system comes with neither Curses nor NCurses,
                   4562:     this will take care to install the devel/ncurses package.
                   4563: 
                   4564:   * krb5.buildlink3.mk uses the value of KRB5_ACCEPTED to choose between adding
                   4565:     a dependency on Heimdal or MIT-krb5 for packages that require a Kerberos 5
                   4566:     implementation.
                   4567: 
                   4568:   * motif.buildlink3.mk checks for a system-provided Motif installation or adds
                   4569:     a dependency on x11/lesstif or x11/openmotif. The user can set MOTIF_TYPE
                   4570:     to "dt", "lesstif", or "openmotif" to choose which Motif version will be
                   4571:     used.
                   4572: 
                   4573:   * oss.buildlink3.mk defines several variables that may be used by packages
                   4574:     that use the Open Sound System (OSS) API.
                   4575: 
                   4576:   * pgsql.buildlink3.mk will accept either Postgres 8.0, 8.1, or 8.2, whichever
                   4577:     is found installed. See the file for more information.
                   4578: 
                   4579:   * pthread.buildlink3.mk uses the value of PTHREAD_OPTS and checks for native
                   4580:     pthreads or adds a dependency on devel/pth as needed.
                   4581: 
                   4582:   * xaw.buildlink3.mk uses the value of XAW_TYPE to choose a particular Athena
                   4583:     widgets library.
                   4584: 
                   4585: The comments in those buildlink3.mk files provide a more complete description
                   4586: of how to use them properly.
                   4587: 
                   4588: 13.2. Writing buildlink3.mk files
                   4589: 
                   4590: A package's buildlink3.mk file is included by Makefiles to indicate the need to
                   4591: compile and link against header files and libraries provided by the package. A
                   4592: buildlink3.mk file should always provide enough information to add the correct
                   4593: type of dependency relationship and include any other buildlink3.mk files that
                   4594: it needs to find headers and libraries that it needs in turn.
                   4595: 
                   4596: To generate an initial buildlink3.mk file for further editing, Rene Hexel's
                   4597: pkgtools/createbuildlink package is highly recommended. For most packages, the
                   4598: following command will generate a good starting point for buildlink3.mk files:
                   4599: 
                   4600: % cd pkgsrc/category/pkgdir
                   4601: % createbuildlink >buildlink3.mk
                   4602: 
                   4603: 
                   4604: 13.2.1. Anatomy of a buildlink3.mk file
                   4605: 
                   4606: The following real-life example buildlink3.mk is taken from pkgsrc/graphics/
                   4607: tiff:
                   4608: 
1.2       rillig   4609: # $NetBSD: buildlink3.mk,v 1.7 2004/03/18 09:12:12 jlam Exp $
1.1       dsieger  4610: 
                   4611: BUILDLINK_DEPTH:=       ${BUILDLINK_DEPTH}+
                   4612: TIFF_BUILDLINK3_MK:=    ${TIFF_BUILDLINK3_MK}+
                   4613: 
                   4614: .if ${BUILDLINK_DEPTH} == "+"
                   4615: BUILDLINK_DEPENDS+=     tiff
                   4616: .endif
                   4617: 
                   4618: BUILDLINK_PACKAGES:=    ${BUILDLINK_PACKAGES:Ntiff}
                   4619: BUILDLINK_PACKAGES+=    tiff
                   4620: 
                   4621: .if ${TIFF_BUILDLINK3_MK} == "+"
                   4622: BUILDLINK_API_DEPENDS.tiff+=        tiff>=3.6.1
                   4623: BUILDLINK_PKGSRCDIR.tiff?=      ../../graphics/tiff
                   4624: .endif  # TIFF_BUILDLINK3_MK
                   4625: 
                   4626: .include "../../devel/zlib/buildlink3.mk"
                   4627: .include "../../graphics/jpeg/buildlink3.mk"
                   4628: 
                   4629: BUILDLINK_DEPTH:=       ${BUILDLINK_DEPTH:S/+$//}
                   4630: 
                   4631: The header and footer manipulate BUILDLINK_DEPTH, which is common across all
                   4632: buildlink3.mk files and is used to track at what depth we are including
                   4633: buildlink3.mk files.
                   4634: 
                   4635: The first section controls if the dependency on pkg is added. BUILDLINK_DEPENDS
                   4636: is the global list of packages for which dependencies are added by buildlink3.
                   4637: 
                   4638: The second section advises pkgsrc that the buildlink3.mk file for pkg has been
                   4639: included at some point. BUILDLINK_PACKAGES is the global list of packages for
                   4640: which buildlink3.mk files have been included. It must always be appended to
                   4641: within a buildlink3.mk file.
                   4642: 
                   4643: The third section is protected from multiple inclusion and controls how the
                   4644: dependency on pkg is added. Several important variables are set in the section:
                   4645: 
                   4646:   * BUILDLINK_API_DEPENDS.pkg is the actual dependency recorded in the
                   4647:     installed package; this should always be set using += to ensure that we're
                   4648:     appending to any pre-existing list of values. This variable should be set
                   4649:     to the first version of the package that had an API change.
                   4650: 
                   4651:   * BUILDLINK_PKGSRCDIR.pkg is the location of the pkg pkgsrc directory.
                   4652: 
                   4653:   * BUILDLINK_DEPMETHOD.pkg (not shown above) controls whether we use
                   4654:     BUILD_DEPENDS or DEPENDS to add the dependency on pkg. The build dependency
                   4655:     is selected by setting BUILDLINK_DEPMETHOD.pkg to "build". By default, the
                   4656:     full dependency is used.
                   4657: 
                   4658:   * BUILDLINK_INCDIRS.pkg and BUILDLINK_LIBDIRS.pkg (not shown above) are lists
                   4659:     of subdirectories of ${BUILDLINK_PREFIX.pkg} to add to the header and
                   4660:     library search paths. These default to "include" and "lib" respectively.
                   4661: 
                   4662:   * BUILDLINK_CPPFLAGS.pkg (not shown above) is the list of preprocessor flags
                   4663:     to add to CPPFLAGS, which are passed on to the configure and build phases.
                   4664:     The "-I" option should be avoided and instead be handled using
                   4665:     BUILDLINK_INCDIRS.pkg as above.
                   4666: 
                   4667: The following variables are all optionally defined within this second section
                   4668: (protected against multiple inclusion) and control which package files are
                   4669: symlinked into ${BUILDLINK_DIR} and how their names are transformed during the
                   4670: symlinking:
                   4671: 
                   4672:   * BUILDLINK_FILES.pkg (not shown above) is a shell glob pattern relative to $
                   4673:     {BUILDLINK_PREFIX.pkg} to be symlinked into ${BUILDLINK_DIR}, e.g. include/
                   4674:     *.h.
                   4675: 
                   4676:   * BUILDLINK_FILES_CMD.pkg (not shown above) is a shell pipeline that outputs
                   4677:     to stdout a list of files relative to ${BUILDLINK_PREFIX.pkg}. The
                   4678:     resulting files are to be symlinked into ${BUILDLINK_DIR}. By default, this
                   4679:     takes the +CONTENTS of a pkg and filters it through $
                   4680:     {BUILDLINK_CONTENTS_FILTER.pkg}.
                   4681: 
                   4682:   * BUILDLINK_CONTENTS_FILTER.pkg (not shown above) is a filter command that
                   4683:     filters +CONTENTS input into a list of files relative to $
                   4684:     {BUILDLINK_PREFIX.pkg} on stdout. By default for overwrite packages,
                   4685:     BUILDLINK_CONTENTS_FILTER.pkg outputs the contents of the include and lib
                   4686:     directories in the package +CONTENTS, and for pkgviews packages, it outputs
                   4687:     any libtool archives in lib directories.
                   4688: 
                   4689:   * BUILDLINK_FNAME_TRANSFORM.pkg (not shown above) is a list of sed arguments
                   4690:     used to transform the name of the source filename into a destination
                   4691:     filename, e.g. -e "s|/curses.h|/ncurses.h|g".
                   4692: 
                   4693: The last section includes any buildlink3.mk needed for pkg's library
                   4694: dependencies. Including these buildlink3.mk files means that the headers and
                   4695: libraries for these dependencies are also symlinked into ${BUILDLINK_DIR}
                   4696: whenever the pkg buildlink3.mk file is included.
                   4697: 
                   4698: 13.2.2. Updating BUILDLINK_API_DEPENDS.pkg in buildlink3.mk files
                   4699: 
                   4700: The situation that requires increasing the dependency listed in
                   4701: BUILDLINK_API_DEPENDS.pkg after a package update is when the API or interface
                   4702: to the header files change.
                   4703: 
                   4704: In this case, BUILDLINK_API_DEPENDS.pkg should be adjusted to require at least
                   4705: the new package version. In some cases, the packages that depend on this new
                   4706: version may need their PKGREVISIONs increased and, if they have buildlink3.mk
                   4707: files, their BUILDLINK_API_DEPENDS.pkg adjusted, too. This is needed so pkgsrc
                   4708: will require the correct package dependency and not settle for an older one
                   4709: when building the source.
                   4710: 
                   4711: BUILDLINK_ABI_DEPENDS.pkg should be increased when the binary interface or
                   4712: sonames (major number of the library version) of any installed shared libraries
                   4713: change. This is needed so that binary packages made using it will require the
                   4714: correct package dependency and not settle for an older one which will not
                   4715: contain the necessary shared libraries.
                   4716: 
                   4717: See Section 18.1.6, "Handling dependencies" for more information about
                   4718: dependencies on other packages, including the BUILDLINK_ABI_DEPENDS and
                   4719: ABI_DEPENDS definitions.
                   4720: 
                   4721: Please take careful consideration before adjusting BUILDLINK_API_DEPENDS.pkg or
                   4722: BUILDLINK_ABI_DEPENDS.pkg as we don't want to cause unneeded package deletions
                   4723: and rebuilds. In many cases, new versions of packages work just fine with older
                   4724: dependencies.
                   4725: 
                   4726: Also it is not needed to set BUILDLINK_ABI_DEPENDS.pkg when it is identical to
                   4727: BUILDLINK_API_DEPENDS.pkg.
                   4728: 
                   4729: 13.3. Writing builtin.mk files
                   4730: 
                   4731: Some packages in pkgsrc install headers and libraries that coincide with
                   4732: headers and libraries present in the base system. Aside from a buildlink3.mk
                   4733: file, these packages should also include a builtin.mk file that includes the
                   4734: necessary checks to decide whether using the built-in software or the pkgsrc
                   4735: software is appropriate.
                   4736: 
                   4737: The only requirements of a builtin.mk file for pkg are:
                   4738: 
                   4739:  1. It should set USE_BUILTIN.pkg to either "yes" or "no" after it is included.
                   4740: 
                   4741:  2. It should not override any USE_BUILTIN.pkg which is already set before the
                   4742:     builtin.mk file is included.
                   4743: 
                   4744:  3. It should be written to allow multiple inclusion. This is very important
                   4745:     and takes careful attention to Makefile coding.
                   4746: 
                   4747: 13.3.1. Anatomy of a builtin.mk file
                   4748: 
                   4749: The following is the recommended template for builtin.mk files:
                   4750: 
                   4751: .if !defined(IS_BUILTIN.foo)
                   4752: #
                   4753: # IS_BUILTIN.foo is set to "yes" or "no" depending on whether "foo"
                   4754: # genuinely exists in the system or not.
                   4755: #
                   4756: IS_BUILTIN.foo?=        no
                   4757: 
                   4758: # BUILTIN_PKG.foo should be set here if "foo" is built-in and its package
                   4759: # version can be determined.
                   4760: #
                   4761: .  if !empty(IS_BUILTIN.foo:M[yY][eE][sS])
                   4762: BUILTIN_PKG.foo?=       foo-1.0
                   4763: .  endif
                   4764: .endif  # IS_BUILTIN.foo
                   4765: 
                   4766: .if !defined(USE_BUILTIN.foo)
                   4767: USE_BUILTIN.foo?=       ${IS_BUILTIN.foo}
                   4768: .  if defined(BUILTIN_PKG.foo)
                   4769: .    for _depend_ in ${BUILDLINK_API_DEPENDS.foo}
                   4770: .      if !empty(USE_BUILTIN.foo:M[yY][eE][sS])
                   4771: USE_BUILTIN.foo!=                                                       \
                   4772:         ${PKG_ADMIN} pmatch '${_depend_}' ${BUILTIN_PKG.foo}            \
                   4773:         && ${ECHO} "yes" || ${ECHO} "no"
                   4774: .      endif
                   4775: .    endfor
                   4776: .  endif
                   4777: .endif  # USE_BUILTIN.foo
                   4778: 
                   4779: CHECK_BUILTIN.foo?=     no
                   4780: .if !empty(CHECK_BUILTIN.foo:M[nN][oO])
                   4781: #
                   4782: # Here we place code that depends on whether USE_BUILTIN.foo is set to
                   4783: # "yes" or "no".
                   4784: #
                   4785: .endif  # CHECK_BUILTIN.foo
                   4786: 
                   4787: The first section sets IS_BUILTIN.pkg depending on if pkg really exists in the
                   4788: base system. This should not be a base system software with similar
                   4789: functionality to pkg; it should only be "yes" if the actual package is included
                   4790: as part of the base system. This variable is only used internally within the
                   4791: builtin.mk file.
                   4792: 
                   4793: The second section sets BUILTIN_PKG.pkg to the version of pkg in the base
                   4794: system if it exists (if IS_BUILTIN.pkg is "yes"). This variable is only used
                   4795: internally within the builtin.mk file.
                   4796: 
                   4797: The third section sets USE_BUILTIN.pkg and is required in all builtin.mk files.
                   4798: The code in this section must make the determination whether the built-in
                   4799: software is adequate to satisfy the dependencies listed in
                   4800: BUILDLINK_API_DEPENDS.pkg. This is typically done by comparing BUILTIN_PKG.pkg
                   4801: against each of the dependencies in BUILDLINK_API_DEPENDS.pkg. USE_BUILTIN.pkg
                   4802: must be set to the correct value by the end of the builtin.mk file. Note that
                   4803: USE_BUILTIN.pkg may be "yes" even if IS_BUILTIN.pkg is "no" because we may make
                   4804: the determination that the built-in version of the software is similar enough
                   4805: to be used as a replacement.
                   4806: 
                   4807: The last section is guarded by CHECK_BUILTIN.pkg, and includes code that uses
                   4808: the value of USE_BUILTIN.pkg set in the previous section. This typically
                   4809: includes, e.g., adding additional dependency restrictions and listing
                   4810: additional files to symlink into ${BUILDLINK_DIR} (via BUILDLINK_FILES.pkg).
                   4811: 
                   4812: 13.3.2. Global preferences for native or pkgsrc software
                   4813: 
                   4814: When building packages, it's possible to choose whether to set a global
                   4815: preference for using either the built-in (native) version or the pkgsrc version
                   4816: of software to satisfy a dependency. This is controlled by setting
                   4817: PREFER_PKGSRC and PREFER_NATIVE. These variables take values of either "yes",
                   4818: "no", or a list of packages. PREFER_PKGSRC tells pkgsrc to use the pkgsrc
                   4819: versions of software, while PREFER_NATIVE tells pkgsrc to use the built-in
                   4820: versions. Preferences are determined by the most specific instance of the
                   4821: package in either PREFER_PKGSRC or PREFER_NATIVE. If a package is specified in
                   4822: neither or in both variables, then PREFER_PKGSRC has precedence over
                   4823: PREFER_NATIVE. For example, to require using pkgsrc versions of software for
                   4824: all but the most basic bits on a NetBSD system, you can set:
                   4825: 
                   4826: PREFER_PKGSRC=  yes
                   4827: PREFER_NATIVE=  getopt skey tcp_wrappers
                   4828: 
                   4829: A package must have a builtin.mk file to be listed in PREFER_NATIVE, otherwise
                   4830: it is simply ignored in that list.
                   4831: 
                   4832: Chapter 14. The pkginstall framework
                   4833: 
                   4834: Table of Contents
                   4835: 
                   4836: 14.1. Files and directories outside the installation prefix
                   4837: 
                   4838:     14.1.1. Directory manipulation
                   4839:     14.1.2. File manipulation
                   4840: 
                   4841: 14.2. Configuration files
                   4842: 
                   4843:     14.2.1. How PKG_SYSCONFDIR is set
                   4844:     14.2.2. Telling the software where configuration files are
                   4845:     14.2.3. Patching installations
                   4846:     14.2.4. Disabling handling of configuration files
                   4847: 
                   4848: 14.3. System startup scripts
                   4849: 
                   4850:     14.3.1. Disabling handling of system startup scripts
                   4851: 
                   4852: 14.4. System users and groups
                   4853: 14.5. System shells
                   4854: 
                   4855:     14.5.1. Disabling shell registration
                   4856: 
                   4857: 14.6. Fonts
                   4858: 
                   4859:     14.6.1. Disabling automatic update of the fonts databases
                   4860: 
                   4861: This chapter describes the framework known as pkginstall, whose key features
                   4862: are:
                   4863: 
                   4864:   * Generic installation and manipulation of directories and files outside the
                   4865:     pkgsrc-handled tree, LOCALBASE.
                   4866: 
                   4867:   * Automatic handling of configuration files during installation, provided
                   4868:     that packages are correctly designed.
                   4869: 
                   4870:   * Generation and installation of system startup scripts.
                   4871: 
                   4872:   * Registration of system users and groups.
                   4873: 
                   4874:   * Registration of system shells.
                   4875: 
                   4876:   * Automatic updating of fonts databases.
                   4877: 
                   4878: The following sections inspect each of the above points in detail.
                   4879: 
                   4880: You may be thinking that many of the things described here could be easily done
                   4881: with simple code in the package's post-installation target (post-install). This
                   4882: is incorrect, as the code in them is only executed when building from source.
                   4883: Machines using binary packages could not benefit from it at all (as the code
                   4884: itself could be unavailable). Therefore, the only way to achieve any of the
                   4885: items described above is by means of the installation scripts, which are
                   4886: automatically generated by pkginstall.
                   4887: 
                   4888: 14.1. Files and directories outside the installation prefix
                   4889: 
                   4890: As you already know, the PLIST file holds a list of files and directories that
                   4891: belong to a package. The names used in it are relative to the installation
                   4892: prefix (${PREFIX}), which means that it cannot register files outside this
                   4893: directory (absolute path names are not allowed). Despite this restriction, some
                   4894: packages need to install files outside this location; e.g., under ${VARBASE} or
                   4895: ${PKG_SYSCONFDIR}. The only way to achieve this is to create such files during
                   4896: installation time by using installation scripts.
                   4897: 
                   4898: The generic installation scripts are shell scripts that can contain arbitrary
                   4899: code. The list of scripts to execute is taken from the INSTALL_FILE variable,
                   4900: which defaults to INSTALL. A similar variable exists for package removal
                   4901: (DEINSTALL_FILE, whose default is DEINSTALL). These scripts can run arbitrary
                   4902: commands, so they have the potential to create and manage files anywhere in the
                   4903: file system.
                   4904: 
                   4905: Using these general installation files is not recommended, but may be needed in
                   4906: some special cases. One reason for avoiding them is that the user has to trust
                   4907: the packager that there is no unwanted or simply erroneous code included in the
                   4908: installation script. Also, previously there were many similar scripts for the
                   4909: same functionality, and fixing a common error involved finding and changing all
                   4910: of them.
                   4911: 
                   4912: The pkginstall framework offers another, standardized way. It provides generic
                   4913: scripts to abstract the manipulation of such files and directories based on
                   4914: variables set in the package's Makefile. The rest of this section describes
                   4915: these variables.
                   4916: 
                   4917: 14.1.1. Directory manipulation
                   4918: 
                   4919: The following variables can be set to request the creation of directories
                   4920: anywhere in the file system:
                   4921: 
                   4922:   * MAKE_DIRS and OWN_DIRS contain a list of directories that should be created
                   4923:     and should attempt to be destroyed by the installation scripts. The
                   4924:     difference between the two is that the latter prompts the administrator to
                   4925:     remove any directories that may be left after deinstallation (because they
                   4926:     were not empty), while the former does not.
                   4927: 
                   4928:   * MAKE_DIRS_PERMS and OWN_DIRS_PERMS contain a list of tuples describing
                   4929:     which directories should be created and should attempt to be destroyed by
                   4930:     the installation scripts. Each tuple holds the following values, separated
                   4931:     by spaces: the directory name, its owner, its group and its numerical mode.
                   4932:     For example:
                   4933: 
                   4934:     MAKE_DIRS_PERMS+=         ${VARBASE}/foo/private ${ROOT_USER} ${ROOT_GROUP} 0700
                   4935: 
                   4936:     The difference between the two is exactly the same as their non-PERMS
                   4937:     counterparts.
                   4938: 
                   4939: 14.1.2. File manipulation
                   4940: 
                   4941: Creating non-empty files outside the installation prefix is tricky because the
                   4942: PLIST forces all files to be inside it. To overcome this problem, the only
                   4943: solution is to extract the file in the known place (i.e., inside the
                   4944: installation prefix) and copy it to the appropriate location during
                   4945: installation (done by the installation scripts generated by pkginstall). We
                   4946: will call the former the master file in the following paragraphs, which
                   4947: describe the variables that can be used to automatically and consistently
                   4948: handle files outside the installation prefix:
                   4949: 
                   4950:   * CONF_FILES and SUPPORT_FILES are pairs of master and target files. During
                   4951:     installation time, the master file is copied to the target one if and only
                   4952:     if the latter does not exist. Upon deinstallation, the target file is
                   4953:     removed provided that it was not modified by the installation.
                   4954: 
                   4955:     The difference between the two is that the latter prompts the administrator
                   4956:     to remove any files that may be left after deinstallation (because they
                   4957:     were not empty), while the former does not.
                   4958: 
                   4959:   * CONF_FILES_PERMS and SUPPORT_FILES_PERMS contain tuples describing master
                   4960:     files as well as their target locations. For each of them, it also
                   4961:     specifies their owner, their group and their numeric permissions, in this
                   4962:     order. For example:
                   4963: 
                   4964:     SUPPORT_FILES_PERMS+= ${PREFIX}/share/somefile ${VARBASE}/somefile ${ROOT_USER} ${ROOT_GROUP} 0700
                   4965: 
                   4966:     The difference between the two is exactly the same as their non-PERMS
                   4967:     counterparts.
                   4968: 
                   4969: 14.2. Configuration files
                   4970: 
                   4971: Configuration files are special in the sense that they are installed in their
                   4972: own specific directory, PKG_SYSCONFDIR, and need special treatment during
                   4973: installation (most of which is automated by pkginstall). The main concept you
                   4974: must bear in mind is that files marked as configuration files are automatically
                   4975: copied to the right place (somewhere inside PKG_SYSCONFDIR) during installation
                   4976: if and only if they didn't exist before. Similarly, they will not be removed if
                   4977: they have local modifications. This ensures that administrators never lose any
                   4978: custom changes they may have made.
                   4979: 
                   4980: 14.2.1. How PKG_SYSCONFDIR is set
                   4981: 
                   4982: As said before, the PKG_SYSCONFDIR variable specifies where configuration files
                   4983: shall be installed. Its contents are set based upon the following variables:
                   4984: 
                   4985:   * PKG_SYSCONFBASE: The configuration's root directory. Defaults to ${PREFIX}/
                   4986:     etc although it may be overridden by the user to point to his preferred
                   4987:     location (e.g., /etc, /etc/pkg, etc.). Packages must not use it directly.
                   4988: 
                   4989:   * PKG_SYSCONFSUBDIR: A subdirectory of PKG_SYSCONFBASE under which the
                   4990:     configuration files for the package being built shall be installed. The
                   4991:     definition of this variable only makes sense in the package's Makefile
                   4992:     (i.e., it is not user-customizable).
                   4993: 
                   4994:     As an example, consider the Apache package, www/apache2, which places its
                   4995:     configuration files under the httpd/ subdirectory of PKG_SYSCONFBASE. This
                   4996:     should be set in the package Makefile.
                   4997: 
                   4998:   * PKG_SYSCONFVAR: Specifies the name of the variable that holds this
                   4999:     package's configuration directory (if different from PKG_SYSCONFBASE). It
                   5000:     defaults to PKGBASE's value, and is always prefixed with PKG_SYSCONFDIR.
                   5001: 
                   5002:   * PKG_SYSCONFDIR.${PKG_SYSCONFVAR}: Holds the directory where the
                   5003:     configuration files for the package identified by PKG_SYSCONFVAR's shall be
                   5004:     placed.
                   5005: 
                   5006: Based on the above variables, pkginstall determines the value of
                   5007: PKG_SYSCONFDIR, which is the only variable that can be used within a package to
                   5008: refer to its configuration directory. The algorithm used to set its value is
                   5009: basically the following:
                   5010: 
                   5011:  1. If PKG_SYSCONFDIR.${PKG_SYSCONFVAR} is set, its value is used.
                   5012: 
                   5013:  2. If the previous variable is not defined but PKG_SYSCONFSUBDIR is set in the
                   5014:     package's Makefile, the resulting value is ${PKG_SYSCONFBASE}/$
                   5015:     {PKG_SYSCONFSUBDIR}.
                   5016: 
                   5017:  3. Otherwise, it is set to ${PKG_SYSCONFBASE}.
                   5018: 
                   5019: It is worth mentioning that ${PKG_SYSCONFDIR} is automatically added to
                   5020: OWN_DIRS. See Section 14.1.1, "Directory manipulation" what this means.
                   5021: 
                   5022: 14.2.2. Telling the software where configuration files are
                   5023: 
                   5024: Given that pkgsrc (and users!) expect configuration files to be in a known
                   5025: place, you need to teach each package where it shall install its files. In some
                   5026: cases you will have to patch the package Makefiles to achieve it. If you are
                   5027: lucky, though, it may be as easy as passing an extra flag to the configuration
                   5028: script; this is the case of GNU Autoconf- generated files:
                   5029: 
                   5030: CONFIGURE_ARGS+= --sysconfdir=${PKG_SYSCONFDIR}
                   5031: 
                   5032: Note that this specifies where the package has to look for its configuration
                   5033: files, not where they will be originally installed (although the difference is
                   5034: never explicit, unfortunately).
                   5035: 
                   5036: 14.2.3. Patching installations
                   5037: 
                   5038: As said before, pkginstall automatically handles configuration files. This
                   5039: means that the packages themselves must not touch the contents of $
                   5040: {PKG_SYSCONFDIR} directly. Bad news is that many software installation scripts
                   5041: will, out of the box, mess with the contents of that directory. So what is the
                   5042: correct procedure to fix this issue?
                   5043: 
                   5044: You must teach the package (usually by manually patching it) to install any
                   5045: configuration files under the examples hierarchy, share/examples/${PKGBASE}/.
                   5046: This way, the PLIST registers them and the administrator always has the
                   5047: original copies available.
                   5048: 
                   5049: Once the required configuration files are in place (i.e., under the examples
                   5050: hierarchy), the pkginstall framework can use them as master copies during the
                   5051: package installation to update what is in ${PKG_SYSCONFDIR}. To achieve this,
                   5052: the variables CONF_FILES and CONF_FILES_PERMS are used. Check out
                   5053: Section 14.1.2, "File manipulation" for information about their syntax and
                   5054: their purpose. Here is an example, taken from the mail/mutt package:
                   5055: 
                   5056: EGDIR=        ${PREFIX}/share/doc/mutt/samples
                   5057: CONF_FILES=   ${EGDIR}/Muttrc ${PKG_SYSCONFDIR}/Muttrc
                   5058: 
                   5059: Note that the EGDIR variable is specific to that package and has no meaning
                   5060: outside it.
                   5061: 
                   5062: 14.2.4. Disabling handling of configuration files
                   5063: 
                   5064: The automatic copying of config files can be toggled by setting the environment
                   5065: variable PKG_CONFIG prior to package installation.
                   5066: 
                   5067: 14.3. System startup scripts
                   5068: 
                   5069: System startup scripts are special files because they must be installed in a
                   5070: place known by the underlying OS, usually outside the installation prefix.
                   5071: Therefore, the same rules described in Section 14.1, "Files and directories
                   5072: outside the installation prefix" apply, and the same solutions can be used.
                   5073: However, pkginstall provides a special mechanism to handle these files.
                   5074: 
                   5075: In order to provide system startup scripts, the package has to:
                   5076: 
                   5077:  1. Store the script inside ${FILESDIR}, with the .sh suffix appended.
                   5078:     Considering the print/cups package as an example, it has a cupsd.sh in its
                   5079:     files directory.
                   5080: 
                   5081:  2. Tell pkginstall to handle it, appending the name of the script, without its
                   5082:     extension, to the RCD_SCRIPTS variable. Continuing the previous example:
                   5083: 
                   5084:     RCD_SCRIPTS+=   cupsd
                   5085: 
                   5086: Once this is done, pkginstall will do the following steps for each script in an
                   5087: automated fashion:
                   5088: 
                   5089:  1. Process the file found in the files directory applying all the
                   5090:     substitutions described in the FILES_SUBST variable.
                   5091: 
                   5092:  2. Copy the script from the files directory to the examples hierarchy, $
                   5093:     {PREFIX}/share/examples/rc.d/. Note that this master file must be
                   5094:     explicitly registered in the PLIST.
                   5095: 
                   5096:  3. Add code to the installation scripts to copy the startup script from the
                   5097:     examples hierarchy into the system-wide startup scripts directory.
                   5098: 
                   5099: 14.3.1. Disabling handling of system startup scripts
                   5100: 
                   5101: The automatic copying of config files can be toggled by setting the environment
                   5102: variable PKG_RCD_SCRIPTS prior to package installation. Note that the scripts
                   5103: will be always copied inside the examples hierarchy, ${PREFIX}/share/examples/
                   5104: rc.d/, no matter what the value of this variable is.
                   5105: 
                   5106: 14.4. System users and groups
                   5107: 
                   5108: If a package needs to create special users and/or groups during installation,
                   5109: it can do so by using the pkginstall framework.
                   5110: 
                   5111: Users can be created by adding entries to the PKG_USERS variable. Each entry
                   5112: has the following syntax:
                   5113: 
                   5114: user:group
                   5115: 
                   5116: Further specification of user details may be done by setting per-user
                   5117: variables. PKG_UID.user is the numeric UID for the user. PKG_GECOS.user is the
                   5118: user's description or comment. PKG_HOME.user is the user's home directory, and
                   5119: defaults to /nonexistent if not specified. PKG_SHELL.user is the user's shell,
                   5120: and defaults to /sbin/nologin if not specified.
                   5121: 
                   5122: Similarly, groups can be created by adding entries to the PKG_GROUPS variable,
                   5123: whose syntax is:
                   5124: 
                   5125: group
                   5126: 
                   5127: The numeric GID of the group may be set by defining PKG_GID.group.
                   5128: 
                   5129: If a package needs to create the users and groups at an earlier stage, then it
                   5130: can set USERGROUP_PHASE to either configure or build to indicate the phase
                   5131: before which the users and groups are created. In this case, the numeric UIDs
                   5132: and GIDs of the created users and groups are automatically hardcoded into the
                   5133: final installation scripts.
                   5134: 
                   5135: 14.5. System shells
                   5136: 
                   5137: Packages that install system shells should register them in the shell database,
                   5138: /etc/shells, to make things easier to the administrator. This must be done from
                   5139: the installation scripts to keep binary packages working on any system.
                   5140: pkginstall provides an easy way to accomplish this task.
                   5141: 
                   5142: When a package provides a shell interpreter, it has to set the PKG_SHELL
                   5143: variable to its absolute file name. This will add some hooks to the
                   5144: installation scripts to handle it. Consider the following example, taken from
                   5145: shells/zsh:
                   5146: 
                   5147: PKG_SHELL=      ${PREFIX}/bin/zsh
                   5148: 
                   5149: 14.5.1. Disabling shell registration
                   5150: 
                   5151: The automatic registration of shell interpreters can be disabled by the
                   5152: administrator by setting the PKG_REGISTER_SHELLS environment variable to NO.
                   5153: 
                   5154: 14.6. Fonts
                   5155: 
                   5156: Packages that install X11 fonts should update the database files that index the
                   5157: fonts within each fonts directory. This can easily be accomplished within the
                   5158: pkginstall framework.
                   5159: 
                   5160: When a package installs X11 fonts, it must list the directories in which fonts
                   5161: are installed in the FONTS_DIRS.type variables, where type can be one of "ttf",
                   5162: "type1" or "x11". This will add hooks to the installation scripts to run the
                   5163: appropriate commands to update the fonts database files within each of those
                   5164: directories. For convenience, if the directory path is relative, it is taken to
                   5165: be relative to the package's installation prefix. Consider the following
                   5166: example, taken from fonts/dbz-ttf:
                   5167: 
                   5168: FONTS_DIRS.ttf= ${PREFIX}/lib/X11/fonts/TTF
                   5169: 
                   5170: 14.6.1. Disabling automatic update of the fonts databases
                   5171: 
                   5172: The automatic update of fonts databases can be disabled by the administrator by
                   5173: setting the PKG_UPDATE_FONTS_DB environment variable to NO.
                   5174: 
                   5175: Chapter 15. Options handling
                   5176: 
                   5177: Table of Contents
                   5178: 
                   5179: 15.1. Global default options
                   5180: 15.2. Converting packages to use bsd.options.mk
                   5181: 15.3. Option Names
                   5182: 
                   5183: Many packages have the ability to be built to support different sets of
                   5184: features. bsd.options.mk is a framework in pkgsrc that provides generic
                   5185: handling of those options that determine different ways in which the packages
                   5186: can be built. It's possible for the user to specify exactly which sets of
                   5187: options will be built into a package or to allow a set of global default
                   5188: options apply.
                   5189: 
                   5190: 15.1. Global default options
                   5191: 
                   5192: Global default options are listed in PKG_DEFAULT_OPTIONS, which is a list of
                   5193: the options that should be built into every package if that option is
1.4       rillig   5194: supported. This variable should be set in mk.conf.
1.1       dsieger  5195: 
                   5196: 15.2. Converting packages to use bsd.options.mk
                   5197: 
                   5198: The following example shows how bsd.options.mk should be used by the
                   5199: hypothetical ``wibble'' package, either in the package Makefile, or in a file,
                   5200: e.g. options.mk, that is included by the main package Makefile.
                   5201: 
                   5202: PKG_OPTIONS_VAR=                PKG_OPTIONS.wibble
                   5203: PKG_SUPPORTED_OPTIONS=          wibble-foo ldap
                   5204: PKG_OPTIONS_OPTIONAL_GROUPS=    database
                   5205: PKG_OPTIONS_GROUP.database=     mysql pgsql
                   5206: PKG_SUGGESTED_OPTIONS=          wibble-foo
                   5207: PKG_OPTIONS_LEGACY_VARS+=       WIBBLE_USE_OPENLDAP:ldap
                   5208: PKG_OPTIONS_LEGACY_OPTS+=       foo:wibble-foo
                   5209: 
                   5210: .include "../../mk/bsd.prefs.mk"
                   5211: 
                   5212: # this package was previously named wibble2
                   5213: .if defined(PKG_OPTIONS.wibble2)
                   5214: PKG_LEGACY_OPTIONS+=            ${PKG_OPTIONS.wibble2}
                   5215: PKG_OPTIONS_DEPRECATED_WARNINGS+= \
                   5216:         "Deprecated variable PKG_OPTIONS.wibble2 used, use ${PKG_OPTIONS_VAR} instead."
                   5217: .endif
                   5218: 
                   5219: .include "../../mk/bsd.options.mk"
                   5220: 
                   5221: # Package-specific option-handling
                   5222: 
                   5223: ###
                   5224: ### FOO support
                   5225: ###
                   5226: .if !empty(PKG_OPTIONS:Mwibble-foo)
                   5227: CONFIGURE_ARGS+=    --enable-foo
                   5228: .endif
                   5229: 
                   5230: ###
                   5231: ### LDAP support
                   5232: ###
                   5233: .if !empty(PKG_OPTIONS:Mldap)
                   5234: .  include "../../databases/openldap-client/buildlink3.mk"
                   5235: CONFIGURE_ARGS+=    --enable-ldap=${BUILDLINK_PREFIX.openldap-client}
                   5236: .endif
                   5237: 
                   5238: ###
                   5239: ### database support
                   5240: ###
                   5241: .if !empty(PKG_OPTIONS:Mmysql)
                   5242: .  include "../../mk/mysql.buildlink3.mk"
                   5243: .endif
                   5244: .if !empty(PKG_OPTIONS:Mpgsql)
                   5245: .  include "../../mk/pgsql.buildlink3.mk"
                   5246: .endif
                   5247: 
                   5248: The first section contains the information about which build options are
                   5249: supported by the package, and any default options settings if needed.
                   5250: 
                   5251:  1. PKG_OPTIONS_VAR is the name of the make(1) variable that the user can set
                   5252:     to override the default options. It should be set to PKG_OPTIONS.pkgbase.
                   5253:     Do not set it to PKG_OPTIONS.${PKGBASE}, since PKGBASE is not defined at
                   5254:     the point where the options are processed.
                   5255: 
                   5256:  2. PKG_SUPPORTED_OPTIONS is a list of build options supported by the package.
                   5257: 
                   5258:  3. PKG_OPTIONS_OPTIONAL_GROUPS is a list of names of groups of mutually
                   5259:     exclusive options. The options in each group are listed in
                   5260:     PKG_OPTIONS_GROUP.groupname. The most specific setting of any option from
                   5261:     the group takes precedence over all other options in the group. Options
                   5262:     from the groups will be automatically added to PKG_SUPPORTED_OPTIONS.
                   5263: 
                   5264:  4. PKG_OPTIONS_REQUIRED_GROUPS is like PKG_OPTIONS_OPTIONAL_GROUPS, but
                   5265:     building the packages will fail if no option from the group is selected.
                   5266: 
                   5267:  5. PKG_OPTIONS_NONEMPTY_SETS is a list of names of sets of options. At least
                   5268:     one option from each set must be selected. The options in each set are
                   5269:     listed in PKG_OPTIONS_SET.setname. Options from the sets will be
                   5270:     automatically added to PKG_SUPPORTED_OPTIONS. Building the package will
                   5271:     fail if no option from the set is selected.
                   5272: 
                   5273:  6. PKG_SUGGESTED_OPTIONS is a list of build options which are enabled by
                   5274:     default.
                   5275: 
                   5276:  7. PKG_OPTIONS_LEGACY_VARS is a list of "USE_VARIABLE:option" pairs that map
1.4       rillig   5277:     legacy mk.conf variables to their option counterparts. Pairs should be
1.1       dsieger  5278:     added with "+=" to keep the listing of global legacy variables. A warning
                   5279:     will be issued if the user uses a legacy variable.
                   5280: 
                   5281:  8. PKG_OPTIONS_LEGACY_OPTS is a list of "old-option:new-option" pairs that map
                   5282:     options that have been renamed to their new counterparts. Pairs should be
                   5283:     added with "+=" to keep the listing of global legacy options. A warning
                   5284:     will be issued if the user uses a legacy option.
                   5285: 
                   5286:  9. PKG_LEGACY_OPTIONS is a list of options implied by deprecated variables
                   5287:     used. This can be used for cases that neither PKG_OPTIONS_LEGACY_VARS nor
                   5288:     PKG_OPTIONS_LEGACY_OPTS can handle, e. g. when PKG_OPTIONS_VAR is renamed.
                   5289: 
                   5290: 10. PKG_OPTIONS_DEPRECATED_WARNINGS is a list of warnings about deprecated
                   5291:     variables or options used, and what to use instead.
                   5292: 
                   5293: A package should never modify PKG_DEFAULT_OPTIONS or the variable named in
                   5294: PKG_OPTIONS_VAR. These are strictly user-settable. To suggest a default set of
                   5295: options, use PKG_SUGGESTED_OPTIONS.
                   5296: 
                   5297: PKG_OPTIONS_VAR must be defined before including bsd.options.mk. If none of
                   5298: PKG_SUPPORTED_OPTIONS, PKG_OPTIONS_OPTIONAL_GROUPS, and
                   5299: PKG_OPTIONS_REQUIRED_GROUPS are defined (as can happen with platform-specific
                   5300: options if none of them is supported on the current platform), PKG_OPTIONS is
                   5301: set to the empty list and the package is otherwise treated as not using the
                   5302: options framework.
                   5303: 
                   5304: After the inclusion of bsd.options.mk, the variable PKG_OPTIONS contains the
                   5305: list of selected build options, properly filtered to remove unsupported and
                   5306: duplicate options.
                   5307: 
                   5308: The remaining sections contain the logic that is specific to each option. The
                   5309: correct way to check for an option is to check whether it is listed in
                   5310: PKG_OPTIONS:
                   5311: 
                   5312: .if !empty(PKG_OPTIONS:Moption)
                   5313: 
                   5314: 15.3. Option Names
                   5315: 
                   5316: Options that enable similar features in different packages (like optional
                   5317: support for a library) should use a common name in all packages that support it
                   5318: (like the name of the library). If another package already has an option with
                   5319: the same meaning, use the same name.
                   5320: 
                   5321: Options that enable features specific to one package, where it's unlikely that
                   5322: another (unrelated) package has the same (or a similar) optional feature,
                   5323: should use a name prefixed with pkgname-.
                   5324: 
                   5325: If a group of related packages share an optional feature specific to that
                   5326: group, prefix it with the name of the "main" package (e. g.
                   5327: djbware-errno-hack).
                   5328: 
                   5329: For new options, add a line to mk/defaults/options.description. Lines have two
                   5330: fields, separated by tab. The first field is the option name, the second its
                   5331: description. The description should be a whole sentence (starting with an
                   5332: uppercase letter and ending with a period) that describes what enabling the
                   5333: option does. E. g. "Enable ispell support." The file is sorted by option names.
                   5334: 
                   5335: Chapter 16. The build process
                   5336: 
                   5337: Table of Contents
                   5338: 
                   5339: 16.1. Introduction
                   5340: 16.2. Program location
                   5341: 16.3. Directories used during the build process
                   5342: 16.4. Running a phase
                   5343: 16.5. The fetch phase
                   5344: 
                   5345:     16.5.1. What to fetch and where to get it from
                   5346:     16.5.2. How are the files fetched?
                   5347: 
                   5348: 16.6. The checksum phase
                   5349: 16.7. The extract phase
                   5350: 16.8. The patch phase
                   5351: 16.9. The tools phase
                   5352: 16.10. The wrapper phase
                   5353: 16.11. The configure phase
                   5354: 16.12. The build phase
                   5355: 16.13. The test phase
                   5356: 16.14. The install phase
                   5357: 16.15. The package phase
                   5358: 16.16. Cleaning up
                   5359: 16.17. Other helpful targets
                   5360: 
                   5361: 16.1. Introduction
                   5362: 
                   5363: This chapter gives a detailed description on how a package is built. Building a
                   5364: package is separated into different phases (for example fetch, build, install),
                   5365: all of which are described in the following sections. Each phase is splitted
                   5366: into so-called stages, which take the name of the containing phase, prefixed by
                   5367: one of pre-, do- or post-. (Examples are pre-configure, post-build.) Most of
                   5368: the actual work is done in the do-* stages.
                   5369: 
                   5370: Never override the regular targets (like fetch), if you have to, override the
                   5371: do-* ones instead.
                   5372: 
                   5373: The basic steps for building a program are always the same. First the program's
                   5374: source (distfile) must be brought to the local system and then extracted. After
                   5375: any pkgsrc-specific patches to compile properly are applied, the software can
                   5376: be configured, then built (usually by compiling), and finally the generated
                   5377: binaries, etc. can be put into place on the system.
                   5378: 
                   5379: To get more details about what is happening at each step, you can set the
                   5380: PKG_VERBOSE variable, or the PATCH_DEBUG variable if you are just interested in
                   5381: more details about the patch step.
                   5382: 
                   5383: 16.2. Program location
                   5384: 
                   5385: Before outlining the process performed by the NetBSD package system in the next
                   5386: section, here's a brief discussion on where programs are installed, and which
                   5387: variables influence this.
                   5388: 
                   5389: The automatic variable PREFIX indicates where all files of the final program
                   5390: shall be installed. It is usually set to LOCALBASE (/usr/pkg), or CROSSBASE for
                   5391: pkgs in the cross category. The value of PREFIX needs to be put into the
                   5392: various places in the program's source where paths to these files are encoded.
                   5393: See Section 10.3, "patches/*" and Section 18.3.1, "Shared libraries - libtool"
                   5394: for more details.
                   5395: 
                   5396: When choosing which of these variables to use, follow the following rules:
                   5397: 
                   5398:   * PREFIX always points to the location where the current pkg will be
                   5399:     installed. When referring to a pkg's own installation path, use "${PREFIX}
                   5400:     ".
                   5401: 
                   5402:   * LOCALBASE is where all non-X11 pkgs are installed. If you need to construct
                   5403:     a -I or -L argument to the compiler to find includes and libraries
                   5404:     installed by another non-X11 pkg, use "${LOCALBASE}". The name LOCALBASE
                   5405:     stems from FreeBSD, which installed all packages in /usr/local. As pkgsrc
                   5406:     leaves /usr/local for the system administrator, this variable is a
                   5407:     misnomer.
                   5408: 
                   5409:   * X11BASE is where the actual X11 distribution (from xsrc, etc.) is
                   5410:     installed. When looking for standard X11 includes (not those installed by a
                   5411:     package), use "${X11BASE}".
                   5412: 
                   5413:   * X11-based packages are special in that they may be installed in either
                   5414:     X11BASE or LOCALBASE.
                   5415: 
                   5416:     Usually, X11 packages should be installed under LOCALBASE whenever
                   5417:     possible. Note that you will need to include ../../mk/x11.buildlink3.mk in
                   5418:     them to request the presence of X11 and to get the right compilation flags.
                   5419: 
                   5420:     Even though, there are some packages that cannot be installed under
                   5421:     LOCALBASE: those that come with app-defaults files. These packages are
                   5422:     special and they must be placed under X11BASE. To accomplish this, set
                   5423:     either USE_X11BASE or USE_IMAKE in your package.
                   5424: 
                   5425:     Some notes: If you need to find includes or libraries installed by a pkg
                   5426:     that has USE_IMAKE or USE_X11BASE in its pkg Makefile, you need to look in
                   5427:     both ${X11BASE} and ${LOCALBASE}. To force installation of all X11 packages
                   5428:     in LOCALBASE, the pkgtools/xpkgwedge package is enabled by default.
                   5429: 
                   5430:   * X11PREFIX should be used to refer to the installed location of an X11
                   5431:     package. X11PREFIX will be set to X11BASE if xpkgwedge is not installed,
                   5432:     and to LOCALBASE if xpkgwedge is installed.
                   5433: 
                   5434:   * If xpkgwedge is installed, it is possible to have some packages installed
                   5435:     in X11BASE and some in LOCALBASE. To determine the prefix of an installed
                   5436:     package, the EVAL_PREFIX definition can be used. It takes pairs in the
                   5437:     format "DIRNAME=<package>", and the make(1) variable DIRNAME will be set to
                   5438:     the prefix of the installed package <package>, or "${X11PREFIX}" if the
                   5439:     package is not installed.
                   5440: 
                   5441:     This is best illustrated by example.
                   5442: 
                   5443:     The following lines are taken from pkgsrc/wm/scwm/Makefile:
                   5444: 
                   5445:     EVAL_PREFIX+=           GTKDIR=gtk+
                   5446:     CONFIGURE_ARGS+=        --with-guile-prefix=${LOCALBASE:Q}
                   5447:     CONFIGURE_ARGS+=        --with-gtk-prefix=${GTKDIR:Q}
                   5448:     CONFIGURE_ARGS+=        --enable-multibyte
                   5449: 
                   5450:     Specific defaults can be defined for the packages evaluated using
                   5451:     EVAL_PREFIX, by using a definition of the form:
                   5452: 
                   5453:     GTKDIR_DEFAULT= ${LOCALBASE}
                   5454: 
                   5455:     where GTKDIR corresponds to the first definition in the EVAL_PREFIX pair.
                   5456: 
                   5457:   * Within ${PREFIX}, packages should install files according to hier(7), with
                   5458:     the exception that manual pages go into ${PREFIX}/man, not ${PREFIX}/share/
                   5459:     man.
                   5460: 
                   5461: 16.3. Directories used during the build process
                   5462: 
                   5463: When building a package, a number of directories is used to store source files,
                   5464: temporary files, pkgsrc-internal files, and so on. These directories are
                   5465: explained here.
                   5466: 
                   5467: Some of the directory variables contain relative pathnames. There are two
                   5468: common base directories for these relative directories: PKGSRCDIR/PKGPATH is
                   5469: used for directories that are pkgsrc-specific. WRKSRC is used for directories
                   5470: inside the package itself.
                   5471: 
                   5472: PKGSRCDIR
                   5473: 
                   5474:     This is an absolute pathname that points to the pkgsrc root directory.
                   5475:     Generally, you don't need it.
                   5476: 
                   5477: PKGDIR
                   5478: 
                   5479:     This is an absolute pathname that points to the current package.
                   5480: 
                   5481: PKGPATH
                   5482: 
                   5483:     This is a pathname relative to PKGSRCDIR that points to the current
                   5484:     package.
                   5485: 
                   5486: WRKDIR
                   5487: 
                   5488:     This is an absolute pathname pointing to the directory where all work takes
                   5489:     place. The distfiles are extracted to this directory. It also contains
                   5490:     temporary directories and log files used by the various pkgsrc frameworks,
                   5491:     like buildlink or the wrappers.
                   5492: 
                   5493: WRKSRC
                   5494: 
                   5495:     This is an absolute pathname pointing to the directory where the distfiles
                   5496:     are extracted. It is usually a direct subdirectory of WRKDIR, and often
                   5497:     it's the only directory entry that isn't hidden. This variable may be
                   5498:     changed by a package Makefile.
                   5499: 
                   5500: 16.4. Running a phase
                   5501: 
                   5502: You can run a particular phase by typing make phase, where phase is the name of
                   5503: the phase. This will automatically run all phases that are required for this
                   5504: phase. The default phase is build, that is, when you run make without
                   5505: parameters in a package directory, the package will be built, but not
                   5506: installed.
                   5507: 
                   5508: 16.5. The fetch phase
                   5509: 
                   5510: The first step in building a package is to fetch the distribution files
                   5511: (distfiles) from the sites that are providing them. This is the task of the
                   5512: fetch phase.
                   5513: 
                   5514: 16.5.1. What to fetch and where to get it from
                   5515: 
                   5516: In simple cases, MASTER_SITES defines all URLs from where the distfile, whose
                   5517: name is derived from the DISTNAME variable, is fetched. The more complicated
                   5518: cases are described below.
                   5519: 
                   5520: The variable DISTFILES specifies the list of distfiles that have to be fetched.
                   5521: Its value defaults to ${DISTNAME}${EXTRACT_SUFX}, so that most packages don't
                   5522: need to define it at all. EXTRACT_SUFX is .tar.gz by default, but can be
                   5523: changed freely. Note that if your package requires additional distfiles to the
                   5524: default one, you cannot just append the additional filenames using the +=
                   5525: operator, but you have write for example:
                   5526: 
                   5527: DISTFILES=      ${DISTNAME}${EXTRACT_SUFX} additional-files.tar.gz
                   5528: 
                   5529: Each distfile is fetched from a list of sites, usually MASTER_SITES. If the
                   5530: package has multiple DISTFILES or multiple PATCHFILES from different sites, you
                   5531: can set SITES.distfile to the list of URLs where the file distfile (including
                   5532: the suffix) can be found.
                   5533: 
                   5534: DISTFILES=      ${DISTNAME}${EXTRACT_SUFX}
                   5535: DISTFILES+=     foo-file.tar.gz
                   5536: SITES.foo-file.tar.gz= \
                   5537: http://www.somewhere.com/somehow/ \
                   5538: http://www.somewhereelse.com/mirror/somehow/
                   5539: 
                   5540: When actually fetching the distfiles, each item from MASTER_SITES or SITES.*
                   5541: gets the name of each distfile appended to it, without an intermediate slash.
                   5542: Therefore, all site values have to end with a slash or other separator
                   5543: character. This allows for example to set MASTER_SITES to a URL of a CGI script
                   5544: that gets the name of the distfile as a parameter. In this case, the definition
                   5545: would look like:
                   5546: 
                   5547: MASTER_SITES=   http://www.example.com/download.cgi?file=
                   5548: 
                   5549: There are some predefined values for MASTER_SITES, which can be used in
                   5550: packages. The names of the variables should speak for themselves.
                   5551: 
                   5552: ${MASTER_SITE_APACHE}
                   5553: ${MASTER_SITE_BACKUP}
                   5554: ${MASTER_SITE_CYGWIN}
                   5555: ${MASTER_SITE_DEBIAN}
                   5556: ${MASTER_SITE_FREEBSD}
                   5557: ${MASTER_SITE_FREEBSD_LOCAL}
                   5558: ${MASTER_SITE_GENTOO}
                   5559: ${MASTER_SITE_GNOME}
                   5560: ${MASTER_SITE_GNU}
                   5561: ${MASTER_SITE_GNUSTEP}
                   5562: ${MASTER_SITE_IFARCHIVE}
                   5563: ${MASTER_SITE_KDE}
                   5564: ${MASTER_SITE_MOZILLA}
                   5565: ${MASTER_SITE_MYSQL}
                   5566: ${MASTER_SITE_OPENOFFICE}
                   5567: ${MASTER_SITE_PERL_CPAN}
                   5568: ${MASTER_SITE_PGSQL}
                   5569: ${MASTER_SITE_R_CRAN}
                   5570: ${MASTER_SITE_SOURCEFORGE}
                   5571: ${MASTER_SITE_SOURCEFORGE_JP}
                   5572: ${MASTER_SITE_SUNSITE}
                   5573: ${MASTER_SITE_SUSE}
                   5574: ${MASTER_SITE_TEX_CTAN}
                   5575: ${MASTER_SITE_XCONTRIB}
                   5576: ${MASTER_SITE_XEMACS}
                   5577: 
                   5578: Some explanations for the less self-explaining ones: MASTER_SITE_BACKUP
                   5579: contains backup sites for packages that are maintained in ftp://ftp.NetBSD.org/
                   5580: pub/NetBSD/packages/distfiles/${DIST_SUBDIR}. MASTER_SITE_LOCAL contains local
                   5581: package source distributions that are maintained in ftp://ftp.NetBSD.org/pub/
                   5582: NetBSD/packages/distfiles/LOCAL_PORTS/.
                   5583: 
                   5584: If you choose one of these predefined sites, you may want to specify a
                   5585: subdirectory of that site. Since these macros may expand to more than one
                   5586: actual site, you must use the following construct to specify a subdirectory:
                   5587: 
                   5588: MASTER_SITES=   ${MASTER_SITE_GNU:=subdirectory/name/}
                   5589: MASTER_SITES=   ${MASTER_SITE_SOURCEFORGE:=project_name/}
                   5590: 
                   5591: Note the trailing slash after the subdirectory name.
                   5592: 
                   5593: 16.5.2. How are the files fetched?
                   5594: 
                   5595: The fetch phase makes sure that all the distfiles exist in a local directory
                   5596: (DISTDIR, which can be set by the pkgsrc user). If the files do not exist, they
                   5597: are fetched using commands of the form
                   5598: 
                   5599: ${FETCH_CMD} ${FETCH_BEFORE_ARGS} ${site}${file} ${FETCH_AFTER_ARGS}
                   5600: 
                   5601: where ${site} varies through several possibilities in turn: first,
                   5602: MASTER_SITE_OVERRIDE is tried, then the sites specified in either SITES.file if
                   5603: defined, else MASTER_SITES or PATCH_SITES, as applies, then finally the value
                   5604: of MASTER_SITE_BACKUP. The order of all except the first and the last can be
                   5605: optionally sorted by the user, via setting either MASTER_SORT_RANDOM, and
                   5606: MASTER_SORT_AWK or MASTER_SORT_REGEX.
                   5607: 
                   5608: The distfiles mirror run by the NetBSD Foundation uses the mirror-distfiles
                   5609: target to mirror the distfiles, if they are freely distributable. Packages
                   5610: setting NO_SRC_ON_FTP (usually to "${RESTRICTED}") will not have their
                   5611: distfiles mirrored.
                   5612: 
                   5613: 16.6. The checksum phase
                   5614: 
                   5615: After the distfile(s) are fetched, their checksum is generated and compared
                   5616: with the checksums stored in the distinfo file. If the checksums don't match,
                   5617: the build is aborted. This is to ensure the same distfile is used for building,
                   5618: and that the distfile wasn't changed, e.g. by some malign force, deliberately
                   5619: changed distfiles on the master distribution site or network lossage.
                   5620: 
                   5621: 16.7. The extract phase
                   5622: 
                   5623: When the distfiles are present on the local system, they need to be extracted,
                   5624: as they usually come in the form of some compressed archive format.
                   5625: 
                   5626: By default, all DISTFILES are extracted. If you only need some of them, you can
                   5627: set the EXTRACT_ONLY variable to the list of those files.
                   5628: 
                   5629: Extracting the files is usually done by a little program, mk/extract/extract,
                   5630: which already knows how to extract various archive formats, so most likely you
                   5631: will not need to change anything here. But if you need, the following variables
                   5632: may help you:
                   5633: 
                   5634: EXTRACT_OPTS_{BIN,LHA,PAX,RAR,TAR,ZIP,ZOO}
                   5635: 
                   5636:     Use these variables to override the default options for an extract command,
                   5637:     which are defined in mk/extract/extract.
                   5638: 
                   5639: EXTRACT_USING
                   5640: 
                   5641:     This variable can be set to gtar, nbtar (which is the default value), pax,
                   5642:     or an absolute pathname pointing to the command with which tar archives
                   5643:     should be extracted.
                   5644: 
                   5645: If the extract program doesn't serve your needs, you can also override the
                   5646: EXTRACT_CMD variable, which holds the command used for extracting the files.
                   5647: This command is executed in the ${WRKSRC} directory. During execution of this
                   5648: command, the shell variable extract_file holds the absolute pathname of the
                   5649: file that is going to be extracted.
                   5650: 
                   5651: And if that still does not suffice, you can override the do-extract target in
                   5652: the package Makefile.
                   5653: 
                   5654: 16.8. The patch phase
                   5655: 
                   5656: After extraction, all the patches named by the PATCHFILES, those present in the
                   5657: patches subdirectory of the package as well as in $LOCALPATCHES/$PKGPATH (e.g.
                   5658: /usr/local/patches/graphics/png) are applied. Patchfiles ending in .Z or .gz
                   5659: are uncompressed before they are applied, files ending in .orig or .rej are
                   5660: ignored. Any special options to patch(1) can be handed in PATCH_DIST_ARGS. See
                   5661: Section 10.3, "patches/*" for more details.
                   5662: 
                   5663: By default patch(1) is given special args to make it fail if the patches apply
                   5664: with some lines of fuzz. Please fix (regen) the patches so that they apply
                   5665: cleanly. The rationale behind this is that patches that don't apply cleanly may
                   5666: end up being applied in the wrong place, and cause severe harm there.
                   5667: 
                   5668: 16.9. The tools phase
                   5669: 
                   5670: This is covered in Chapter 17, Tools needed for building or running.
                   5671: 
                   5672: 16.10. The wrapper phase
                   5673: 
                   5674: This phase creates wrapper programs for the compilers and linkers. The
                   5675: following variables can be used to tweak the wrappers.
                   5676: 
                   5677: ECHO_WRAPPER_MSG
                   5678: 
                   5679:     The command used to print progress messages. Does nothing by default. Set
                   5680:     to ${ECHO} to see the progress messages.
                   5681: 
                   5682: WRAPPER_DEBUG
                   5683: 
                   5684:     This variable can be set to yes (default) or no, depending on whether you
                   5685:     want additional information in the wrapper log file.
                   5686: 
                   5687: WRAPPER_UPDATE_CACHE
                   5688: 
                   5689:     This variable can be set to yes or no, depending on whether the wrapper
                   5690:     should use its cache, which will improve the speed. The default value is
                   5691:     yes, but is forced to no if the platform does not support it.
                   5692: 
                   5693: WRAPPER_REORDER_CMDS
                   5694: 
                   5695:     A list of reordering commands. A reordering command has the form reorder:l:
                   5696:     lib1:lib2. It ensures that that -llib1 occurs before -llib2.
                   5697: 
                   5698: WRAPPER_TRANSFORM_CMDS
                   5699: 
                   5700:     A list of transformation commands. [TODO: investigate further]
                   5701: 
                   5702: 16.11. The configure phase
                   5703: 
                   5704: Most pieces of software need information on the header files, system calls, and
                   5705: library routines which are available on the platform they run on. The process
                   5706: of determining this information is known as configuration, and is usually
                   5707: automated. In most cases, a script is supplied with the distfiles, and its
                   5708: invocation results in generation of header files, Makefiles, etc.
                   5709: 
                   5710: If the package contains a configure script, this can be invoked by setting
                   5711: HAS_CONFIGURE to "yes". If the configure script is a GNU autoconf script, you
                   5712: should set GNU_CONFIGURE to "yes" instead. What happens in the configure phase
                   5713: is roughly:
                   5714: 
                   5715: .for d in ${CONFIGURE_DIRS}
                   5716:         cd ${WRKSRC} \
                   5717:         && cd ${d} \
                   5718:         && env ${CONFIGURE_ENV} ${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}
                   5719: .endfor
                   5720: 
                   5721: CONFIGURE_DIRS (default: ".") is a list of pathnames relative to WRKSRC. In
                   5722: each of these directories, the configure script is run with the environment
                   5723: CONFIGURE_ENV and arguments CONFIGURE_ARGS. The variables CONFIGURE_ENV,
                   5724: CONFIGURE_SCRIPT (default: "./configure") and CONFIGURE_ARGS may all be changed
                   5725: by the package.
                   5726: 
                   5727: If the program uses an Imakefile for configuration, the appropriate steps can
                   5728: be invoked by setting USE_IMAKE to "yes". (If you only want the package
                   5729: installed in ${X11PREFIX} but xmkmf not being run, set USE_X11BASE instead.)
                   5730: You can add variables to xmkmf's environment by adding them to the SCRIPTS_ENV
                   5731: variable.
                   5732: 
                   5733: If there is no configure step at all, set NO_CONFIGURE to "yes".
                   5734: 
                   5735: 16.12. The build phase
                   5736: 
                   5737: For building a package, a rough equivalent of the following code is executed.
                   5738: 
                   5739: .for d in ${BUILD_DIRS}
                   5740:         cd ${WRKSRC} \
                   5741:         && cd ${d} \
                   5742:         && env ${MAKE_ENV} \
                   5743:             ${MAKE_PROGRAM} ${BUILD_MAKE_FLAGS} \
                   5744:                 -f ${MAKE_FILE} \
                   5745:                 ${BUILD_TARGET}
                   5746: .endfor
                   5747: 
                   5748: BUILD_DIRS (default: ".") is a list of pathnames relative to WRKSRC. In each of
                   5749: these directories, MAKE_PROGRAM is run with the environment MAKE_ENV and
                   5750: arguments BUILD_MAKE_FLAGS. The variables MAKE_ENV, BUILD_MAKE_FLAGS, MAKE_FILE
                   5751: and BUILD_TARGET may all be changed by the package.
                   5752: 
                   5753: The default value of MAKE_PROGRAM is "gmake" if USE_TOOLS contains "gmake",
                   5754: "make" otherwise. The default value of MAKE_FILE is "Makefile", and
                   5755: BUILD_TARGET defaults to "all".
                   5756: 
                   5757: If there is no build step at all, set NO_BUILD to "yes".
                   5758: 
                   5759: 16.13. The test phase
                   5760: 
                   5761: [TODO]
                   5762: 
                   5763: 16.14. The install phase
                   5764: 
                   5765: Once the build stage has completed, the final step is to install the software
                   5766: in public directories, so users can access the programs and files.
                   5767: 
                   5768: In the install phase, a rough equivalent of the following code is executed.
                   5769: Additionally, before and after this code, much magic is performed to do
                   5770: consistency checks, registering the package, and so on.
                   5771: 
                   5772: .for d in ${INSTALL_DIRS}
                   5773:         cd ${WRKSRC} \
                   5774:         && cd ${d} \
                   5775:         && env ${MAKE_ENV} \
                   5776:             ${MAKE_PROGRAM} ${INSTALL_MAKE_FLAGS} \
                   5777:                 -f ${MAKE_FILE} \
                   5778:                 ${INSTALL_TARGET}
                   5779: .endfor
                   5780: 
                   5781: The variable's meanings are analogous to the ones in the build phase.
                   5782: INSTALL_DIRS defaults to BUILD_DIRS. INSTALL_TARGET is "install" by default,
                   5783: plus "install.man" if USE_IMAKE is defined and NO_INSTALL_MANPAGES is not
                   5784: defined.
                   5785: 
                   5786: In the install phase, the following variables are useful. They are all
                   5787: variations of the install(1) command that have the owner, group and permissions
                   5788: preset. INSTALL is the plain install command. The specialized variants,
                   5789: together with their intended use, are:
                   5790: 
                   5791: INSTALL_PROGRAM_DIR
                   5792: 
                   5793:     directories that contain binaries
                   5794: 
                   5795: INSTALL_SCRIPT_DIR
                   5796: 
                   5797:     directories that contain scripts
                   5798: 
                   5799: INSTALL_LIB_DIR
                   5800: 
                   5801:     directories that contain shared and static libraries
                   5802: 
                   5803: INSTALL_DATA_DIR
                   5804: 
                   5805:     directories that contain data files
                   5806: 
                   5807: INSTALL_MAN_DIR
                   5808: 
                   5809:     directories that contain man pages
                   5810: 
                   5811: INSTALL_PROGRAM
                   5812: 
                   5813:     binaries that can be stripped from debugging symbols
                   5814: 
                   5815: INSTALL_SCRIPT
                   5816: 
                   5817:     binaries that cannot be stripped
                   5818: 
                   5819: INSTALL_GAME
                   5820: 
                   5821:     game binaries
                   5822: 
                   5823: INSTALL_LIB
                   5824: 
                   5825:     shared and static libraries
                   5826: 
                   5827: INSTALL_DATA
                   5828: 
                   5829:     data files
                   5830: 
                   5831: INSTALL_GAME_DATA
                   5832: 
                   5833:     data files for games
                   5834: 
                   5835: INSTALL_MAN
                   5836: 
                   5837:     man pages
                   5838: 
                   5839: Some other variables are:
                   5840: 
                   5841: INSTALLATION_DIRS
                   5842: 
                   5843:     A list of directories relative to PREFIX that are created by pkgsrc at the
                   5844:     beginning of the install phase. The package is supposed to create all
                   5845:     needed directories itself before installing files to it and list all other
                   5846:     directories here.
                   5847: 
                   5848: In the rare cases that a package shouldn't install anything, set NO_INSTALL to
                   5849: "yes". This is mostly relevant for packages in the regress category.
                   5850: 
                   5851: 16.15. The package phase
                   5852: 
                   5853: Once the install stage has completed, a binary package of the installed files
                   5854: can be built. These binary packages can be used for quick installation without
                   5855: previous compilation, e.g. by the make bin-install or by using pkg_add.
                   5856: 
                   5857: By default, the binary packages are created in ${PACKAGES}/All and symlinks are
                   5858: created in ${PACKAGES}/category, one for each category in the CATEGORIES
                   5859: variable. PACKAGES defaults to pkgsrc/packages.
                   5860: 
                   5861: If there should be no binary package, set NO_PACKAGE to "yes". This should only
                   5862: be used in rare cases, like when a package definitely is only usable on the
                   5863: machine where it is built and even then, a binary package can be useful.
                   5864: 
                   5865: 16.16. Cleaning up
                   5866: 
                   5867: Once you're finished with a package, you can clean the work directory by
                   5868: running make clean. If you want to clean the work directories of all
                   5869: dependencies too, use make clean-depends.
                   5870: 
                   5871: 16.17. Other helpful targets
                   5872: 
                   5873: pre/post-*
                   5874: 
                   5875:     For any of the main targets described in the previous section, two
                   5876:     auxiliary targets exist with "pre-" and "post-" used as a prefix for the
                   5877:     main target's name. These targets are invoked before and after the main
                   5878:     target is called, allowing extra configuration or installation steps be
                   5879:     performed from a package's Makefile, for example, which a program's
                   5880:     configure script or install target omitted.
                   5881: 
                   5882: do-*
                   5883: 
                   5884:     Should one of the main targets do the wrong thing, and should there be no
                   5885:     variable to fix this, you can redefine it with the do-* target. (Note that
                   5886:     redefining the target itself instead of the do-* target is a bad idea, as
                   5887:     the pre-* and post-* targets won't be called anymore, etc.) You will not
                   5888:     usually need to do this.
                   5889: 
                   5890: reinstall
                   5891: 
                   5892:     If you did a make install and you noticed some file was not installed
                   5893:     properly, you can repeat the installation with this target, which will
                   5894:     ignore the "already installed" flag.
                   5895: 
                   5896:     This is the default value of DEPENDS_TARGET except in the case of make
                   5897:     update and make package, where the defaults are "package" and "update",
                   5898:     respectively.
                   5899: 
                   5900: deinstall
                   5901: 
                   5902:     This target does a pkg_delete(1) in the current directory, effectively
                   5903:     de-installing the package. The following variables can be used to tune the
                   5904:     behaviour:
                   5905: 
                   5906:     PKG_VERBOSE
                   5907: 
                   5908:         Add a "-v" to the pkg_delete(1) command.
                   5909: 
                   5910:     DEINSTALLDEPENDS
                   5911: 
                   5912:         Remove all packages that require (depend on) the given package. This
                   5913:         can be used to remove any packages that may have been pulled in by a
                   5914:         given package, e.g. if make deinstall DEINSTALLDEPENDS=1 is done in
                   5915:         pkgsrc/x11/kde, this is likely to remove whole KDE. Works by adding
                   5916:         "-R" to the pkg_delete(1) command line.
                   5917: 
                   5918: bin-install
                   5919: 
                   5920:     Install a binary package from local disk and via FTP from a list of sites
                   5921:     (see the BINPKG_SITES variable), and do a make package if no binary package
                   5922:     is available anywhere. The arguments given to pkg_add can be set via
                   5923:     BIN_INSTALL_FLAGS e.g., to do verbose operation, etc.
                   5924: 
                   5925: update
                   5926: 
                   5927:     This target causes the current package to be updated to the latest version.
                   5928:     The package and all depending packages first get de-installed, then current
                   5929:     versions of the corresponding packages get compiled and installed. This is
                   5930:     similar to manually noting which packages are currently installed, then
                   5931:     performing a series of make deinstall and make install (or whatever
                   5932:     UPDATE_TARGET is set to) for these packages.
                   5933: 
                   5934:     You can use the "update" target to resume package updating in case a
                   5935:     previous make update was interrupted for some reason. However, in this
                   5936:     case, make sure you don't call make clean or otherwise remove the list of
                   5937:     dependent packages in WRKDIR. Otherwise, you lose the ability to
                   5938:     automatically update the current package along with the dependent packages
                   5939:     you have installed.
                   5940: 
                   5941:     Resuming an interrupted make update will only work as long as the package
                   5942:     tree remains unchanged. If the source code for one of the packages to be
                   5943:     updated has been changed, resuming make update will most certainly fail!
                   5944: 
1.4       rillig   5945:     The following variables can be used either on the command line or in
1.1       dsieger  5946:     mk.conf to alter the behaviour of make update:
                   5947: 
                   5948:     UPDATE_TARGET
                   5949: 
                   5950:         Install target to recursively use for the updated package and the
                   5951:         dependent packages. Defaults to DEPENDS_TARGET if set, "install"
                   5952:         otherwise for make update. Other good targets are "package" or
                   5953:         "bin-install". Do not set this to "update" or you will get stuck in an
                   5954:         endless loop!
                   5955: 
                   5956:     NOCLEAN
                   5957: 
                   5958:         Don't clean up after updating. Useful if you want to leave the work
                   5959:         sources of the updated packages around for inspection or other
                   5960:         purposes. Be sure you eventually clean up the source tree (see the
                   5961:         "clean-update" target below) or you may run into troubles with old
                   5962:         source code still lying around on your next make or make update.
                   5963: 
                   5964:     REINSTALL
                   5965: 
                   5966:         Deinstall each package before installing (making DEPENDS_TARGET). This
                   5967:         may be necessary if the "clean-update" target (see below) was called
                   5968:         after interrupting a running make update.
                   5969: 
                   5970:     DEPENDS_TARGET
                   5971: 
                   5972:         Allows you to disable recursion and hardcode the target for packages.
                   5973:         The default is "update" for the update target, facilitating a recursive
                   5974:         update of prerequisite packages. Only set DEPENDS_TARGET if you want to
                   5975:         disable recursive updates. Use UPDATE_TARGET instead to just set a
                   5976:         specific target for each package to be installed during make update
                   5977:         (see above).
                   5978: 
                   5979: clean-update
                   5980: 
                   5981:     Clean the source tree for all packages that would get updated if make
                   5982:     update was called from the current directory. This target should not be
                   5983:     used if the current package (or any of its depending packages) have already
                   5984:     been de-installed (e.g., after calling make update) or you may lose some
                   5985:     packages you intended to update. As a rule of thumb: only use this target
                   5986:     before the first time you run make update and only if you have a dirty
                   5987:     package tree (e.g., if you used NOCLEAN).
                   5988: 
                   5989:     If you are unsure about whether your tree is clean, you can either perform
                   5990:     a make clean at the top of the tree, or use the following sequence of
                   5991:     commands from the directory of the package you want to update (before
                   5992:     running make update for the first time, otherwise you lose all the packages
                   5993:     you wanted to update!):
                   5994: 
                   5995:     # make clean-update
                   5996:     # make clean CLEANDEPENDS=YES
                   5997:     # make update
                   5998: 
                   5999: 
1.4       rillig   6000:     The following variables can be used either on the command line or in
1.1       dsieger  6001:     mk.conf to alter the behaviour of make clean-update:
                   6002: 
                   6003:     CLEAR_DIRLIST
                   6004: 
                   6005:         After make clean, do not reconstruct the list of directories to update
                   6006:         for this package. Only use this if make update successfully installed
                   6007:         all packages you wanted to update. Normally, this is done automatically
                   6008:         on make update, but may have been suppressed by the NOCLEAN variable
                   6009:         (see above).
                   6010: 
                   6011: replace
                   6012: 
                   6013:     Update the installation of the current package. This differs from update in
                   6014:     that it does not replace dependent packages. You will need to install
                   6015:     pkgtools/pkg_tarup for this target to work.
                   6016: 
                   6017:     Be careful when using this target! There are no guarantees that dependent
                   6018:     packages will still work, in particular they will most certainly break if
                   6019:     you make replace a library package whose shared library major version
                   6020:     changed between your installed version and the new one. For this reason,
                   6021:     this target is not officially supported and only recommended for advanced
                   6022:     users.
                   6023: 
                   6024: info
                   6025: 
                   6026:     This target invokes pkg_info(1) for the current package. You can use this
                   6027:     to check which version of a package is installed.
                   6028: 
                   6029: index
                   6030: 
                   6031:     This is a top-level command, i.e. it should be used in the pkgsrc
                   6032:     directory. It creates a database of all packages in the local pkgsrc tree,
                   6033:     including dependencies, comment, maintainer, and some other useful
                   6034:     information. Individual entries are created by running make describe in the
                   6035:     packages' directories. This index file is saved as pkgsrc/INDEX. It can be
                   6036:     displayed in verbose format by running make print-index. You can search in
                   6037:     it with make search key=something. You can extract a list of all packages
                   6038:     that depend on a particular one by running make show-deps PKG=somepackage.
                   6039: 
                   6040:     Running this command takes a very long time, some hours even on fast
                   6041:     machines!
                   6042: 
                   6043: readme
                   6044: 
                   6045:     This target generates a README.html file, which can be viewed using a
                   6046:     browser such as www/firefox or www/links. The generated files contain
                   6047:     references to any packages which are in the PACKAGES directory on the local
                   6048:     host. The generated files can be made to refer to URLs based on
                   6049:     FTP_PKG_URL_HOST and FTP_PKG_URL_DIR. For example, if I wanted to generate
                   6050:     README.html files which pointed to binary packages on the local machine, in
                   6051:     the directory /usr/packages, set FTP_PKG_URL_HOST=file://localhost and
                   6052:     FTP_PKG_URL_DIR=/usr/packages. The ${PACKAGES} directory and its
                   6053:     subdirectories will be searched for all the binary packages.
                   6054: 
                   6055:     The target can be run at the toplevel or in category directories, in which
                   6056:     case it descends recursively.
                   6057: 
                   6058: readme-all
                   6059: 
                   6060:     This is a top-level command, run it in pkgsrc. Use this target to create a
                   6061:     file README-all.html which contains a list of all packages currently
                   6062:     available in the NetBSD Packages Collection, together with the category
                   6063:     they belong to and a short description. This file is compiled from the
                   6064:     pkgsrc/*/README.html files, so be sure to run this after a make readme.
                   6065: 
                   6066: cdrom-readme
                   6067: 
                   6068:     This is very much the same as the "readme" target (see above), but is to be
                   6069:     used when generating a pkgsrc tree to be written to a CD-ROM. This target
                   6070:     also produces README.html files, and can be made to refer to URLs based on
                   6071:     CDROM_PKG_URL_HOST and CDROM_PKG_URL_DIR.
                   6072: 
                   6073: show-distfiles
                   6074: 
                   6075:     This target shows which distfiles and patchfiles are needed to build the
                   6076:     package (ALLFILES, which contains all DISTFILES and PATCHFILES, but not
                   6077:     patches/*).
                   6078: 
                   6079: show-downlevel
                   6080: 
                   6081:     This target shows nothing if the package is not installed. If a version of
                   6082:     this package is installed, but is not the version provided in this version
                   6083:     of pkgsrc, then a warning message is displayed. This target can be used to
                   6084:     show which of your installed packages are downlevel, and so the old
                   6085:     versions can be deleted, and the current ones added.
                   6086: 
                   6087: show-pkgsrc-dir
                   6088: 
                   6089:     This target shows the directory in the pkgsrc hierarchy from which the
                   6090:     package can be built and installed. This may not be the same directory as
                   6091:     the one from which the package was installed. This target is intended to be
                   6092:     used by people who may wish to upgrade many packages on a single host, and
                   6093:     can be invoked from the top-level pkgsrc Makefile by using the
                   6094:     "show-host-specific-pkgs" target.
                   6095: 
                   6096: show-installed-depends
                   6097: 
                   6098:     This target shows which installed packages match the current package's
                   6099:     DEPENDS. Useful if out of date dependencies are causing build problems.
                   6100: 
                   6101: check-shlibs
                   6102: 
                   6103:     After a package is installed, check all its binaries and (on ELF platforms)
                   6104:     shared libraries to see if they find the shared libs they need. Run by
1.4       rillig   6105:     default if PKG_DEVELOPER is set in mk.conf.
1.1       dsieger  6106: 
                   6107: print-PLIST
                   6108: 
                   6109:     After a "make install" from a new or upgraded pkg, this prints out an
                   6110:     attempt to generate a new PLIST from a find -newer work/.extract_done. An
                   6111:     attempt is made to care for shared libs etc., but it is strongly
                   6112:     recommended to review the result before putting it into PLIST. On upgrades,
                   6113:     it's useful to diff the output of this command against an already existing
                   6114:     PLIST file.
                   6115: 
                   6116:     If the package installs files via tar(1) or other methods that don't update
                   6117:     file access times, be sure to add these files manually to your PLIST, as
                   6118:     the "find -newer" command used by this target won't catch them!
                   6119: 
                   6120:     See Section 12.3, "Tweaking output of make print-PLIST" for more
                   6121:     information on this target.
                   6122: 
                   6123: bulk-package
                   6124: 
                   6125:     Used to do bulk builds. If an appropriate binary package already exists, no
                   6126:     action is taken. If not, this target will compile, install and package it
                   6127:     (and its depends, if PKG_DEPENDS is set properly. See Section 6.3.1,
                   6128:     "Configuration"). After creating the binary package, the sources, the
                   6129:     just-installed package and its required packages are removed, preserving
                   6130:     free disk space.
                   6131: 
                   6132:     Beware that this target may deinstall all packages installed on a system!
                   6133: 
                   6134: bulk-install
                   6135: 
                   6136:     Used during bulk-installs to install required packages. If an up-to-date
                   6137:     binary package is available, it will be installed via pkg_add(1). If not,
                   6138:     make bulk-package will be executed, but the installed binary won't be
                   6139:     removed.
                   6140: 
                   6141:     A binary package is considered "up-to-date" to be installed via pkg_add(1)
                   6142:     if:
                   6143: 
                   6144:       * None of the package's files (Makefile, ...) were modified since it was
                   6145:         built.
                   6146: 
                   6147:       * None of the package's required (binary) packages were modified since it
                   6148:         was built.
                   6149: 
                   6150:     Beware that this target may deinstall all packages installed on a system!
                   6151: 
                   6152: Chapter 17. Tools needed for building or running
                   6153: 
                   6154: Table of Contents
                   6155: 
                   6156: 17.1. Tools for pkgsrc builds
                   6157: 17.2. Tools needed by packages
                   6158: 17.3. Tools provided by platforms
                   6159: 17.4. Questions regarding the tools
                   6160: 
                   6161: The USE_TOOLS definition is used both internally by pkgsrc and also for
                   6162: individual packages to define what commands are needed for building a package
                   6163: (like BUILD_DEPENDS) or for later run-time of an installed packaged (such as
                   6164: DEPENDS). If the native system provides an adequate tool, then in many cases, a
                   6165: pkgsrc package will not be used.
                   6166: 
                   6167: When building a package, the replacement tools are made available in a
                   6168: directory (as symlinks or wrapper scripts) that is early in the executable
                   6169: search path. Just like the buildlink system, this helps with consistent builds.
                   6170: 
                   6171: A tool may be needed to help build a specific package. For example, perl, GNU
                   6172: make (gmake) or yacc may be needed.
                   6173: 
                   6174: Also a tool may be needed, for example, because the native system's supplied
                   6175: tool may be inefficient for building a package with pkgsrc. For example, a
                   6176: package may need GNU awk, bison (instead of yacc) or a better sed.
                   6177: 
                   6178: The tools used by a package can be listed by running make show-tools.
                   6179: 
                   6180: 17.1. Tools for pkgsrc builds
                   6181: 
                   6182: The default set of tools used by pkgsrc is defined in bsd.pkg.mk. This includes
                   6183: standard Unix tools, such as: cat, awk, chmod, test, and so on. These can be
                   6184: seen by running: make show-var VARNAME=USE_TOOLS.
                   6185: 
                   6186: If a package needs a specific program to build then the USE_TOOLS variable can
                   6187: be used to define the tools needed.
                   6188: 
                   6189: 17.2. Tools needed by packages
                   6190: 
                   6191: In the following examples, the :pkgsrc means to use the pkgsrc version and not
                   6192: the native version for a build dependency. And the :run means that it is used
                   6193: for a run-time dependencies also (and becomes a DEPENDS). The default is a
                   6194: build dependency which can be set with :build. (So in this example, it is the
                   6195: same as gmake:build and pkg-config:build.)
                   6196: 
                   6197: USE_TOOLS+=     mktemp:pkgsrc
                   6198: USE_TOOLS+=     gmake perl:run pkg-config
                   6199: 
                   6200: When using the tools framework, a TOOLS_PATH.foo variable is defined which
                   6201: contains the full path to the appropriate tool. For example, TOOLS_PATH.bash
                   6202: could be "/bin/bash" on Linux systems.
                   6203: 
                   6204: If you always need a pkgsrc version of the tool at run-time, then just use
                   6205: DEPENDS instead.
                   6206: 
                   6207: 17.3. Tools provided by platforms
                   6208: 
                   6209: When improving or porting pkgsrc to a new platform, have a look at (or create)
                   6210: the corresponding platform specific make file fragment under pkgsrc/mk/tools/
                   6211: tools.${OPSYS}.mk which defines the name of the common tools. For example:
                   6212: 
                   6213: .if exists(/usr/bin/bzcat)
                   6214: TOOLS_PLATFORM.bzcat?=          /usr/bin/bzcat
                   6215: .elif exists(/usr/bin/bzip2)
                   6216: TOOLS_PLATFORM.bzcat?=          /usr/bin/bzip2 -cd
                   6217: .endif
                   6218: 
                   6219: TOOLS_PLATFORM.true?=           true                    # shell builtin
                   6220: 
                   6221: 17.4. Questions regarding the tools
                   6222: 
                   6223: 17.4.1. How do I add a new tool?
                   6224: 17.4.2. How do I get a list of all available tools?
                   6225: 17.4.3. How can I get a list of all the tools that a package is using while
                   6226:     being built? I want to know whether it uses sed or not.
                   6227: 
                   6228: 17.4.1. How do I add a new tool?
                   6229: 
                   6230:         TODO
                   6231: 
                   6232: 17.4.2. How do I get a list of all available tools?
                   6233: 
                   6234:         TODO
                   6235: 
                   6236: 17.4.3. How can I get a list of all the tools that a package is using while
                   6237:         being built? I want to know whether it uses sed or not.
                   6238: 
                   6239:         Currently, you can't. (TODO: But I want to be able to do it.)
                   6240: 
                   6241: Chapter 18. Making your package work
                   6242: 
                   6243: Table of Contents
                   6244: 
                   6245: 18.1. General operation
                   6246: 
                   6247:     18.1.1. Portability of packages
                   6248:     18.1.2. How to pull in user-settable variables from mk.conf
                   6249:     18.1.3. User interaction
                   6250:     18.1.4. Handling licenses
                   6251:     18.1.5. Restricted packages
                   6252:     18.1.6. Handling dependencies
                   6253:     18.1.7. Handling conflicts with other packages
                   6254:     18.1.8. Packages that cannot or should not be built
                   6255:     18.1.9. Packages which should not be deleted, once installed
                   6256:     18.1.10. Handling packages with security problems
                   6257:     18.1.11. How to handle incrementing versions when fixing an existing
                   6258:         package
                   6259:     18.1.12. Substituting variable text in the package files (the SUBST
                   6260:         framework)
                   6261: 
                   6262: 18.2. Fixing problems in the fetch phase
                   6263: 
                   6264:     18.2.1. Packages whose distfiles aren't available for plain downloading
                   6265:     18.2.2. How to handle modified distfiles with the 'old' name
                   6266: 
                   6267: 18.3. Fixing problems in the configure phase
                   6268: 
                   6269:     18.3.1. Shared libraries - libtool
                   6270:     18.3.2. Using libtool on GNU packages that already support libtool
                   6271:     18.3.3. GNU Autoconf/Automake
                   6272: 
                   6273: 18.4. Programming languages
                   6274: 
                   6275:     18.4.1. C, C++, and Fortran
                   6276:     18.4.2. Java
                   6277:     18.4.3. Packages containing perl scripts
                   6278:     18.4.4. Other programming languages
                   6279: 
                   6280: 18.5. Fixing problems in the build phase
                   6281: 
                   6282:     18.5.1. Compiling C and C++ code conditionally
                   6283:     18.5.2. How to handle compiler bugs
                   6284:     18.5.3. Undefined reference to "..."
                   6285:     18.5.4. Running out of memory
                   6286: 
                   6287: 18.6. Fixing problems in the install phase
                   6288: 
                   6289:     18.6.1. Creating needed directories
                   6290:     18.6.2. Where to install documentation
                   6291:     18.6.3. Installing highscore files
1.4       rillig   6292:     18.6.4. Adding DESTDIR support to packages
                   6293:     18.6.5. Packages with hardcoded paths to other interpreters
                   6294:     18.6.6. Packages installing perl modules
                   6295:     18.6.7. Packages installing info files
                   6296:     18.6.8. Packages installing man pages
                   6297:     18.6.9. Packages installing GConf2 data files
                   6298:     18.6.10. Packages installing scrollkeeper data files
                   6299:     18.6.11. Packages installing X11 fonts
                   6300:     18.6.12. Packages installing GTK2 modules
                   6301:     18.6.13. Packages installing SGML or XML data
                   6302:     18.6.14. Packages installing extensions to the MIME database
                   6303:     18.6.15. Packages using intltool
                   6304:     18.6.16. Packages installing startup scripts
                   6305:     18.6.17. Packages installing TeX modules
                   6306:     18.6.18. Packages supporting running binaries in emulation
                   6307:     18.6.19. Packages installing hicolor theme icons
                   6308:     18.6.20. Packages installing desktop files
1.1       dsieger  6309: 
                   6310: 18.7. Marking packages as having problems
                   6311: 
                   6312: 18.1. General operation
                   6313: 
                   6314: 18.1.1. Portability of packages
                   6315: 
                   6316: One appealing feature of pkgsrc is that it runs on many different platforms. As
                   6317: a result, it is important to ensure, where possible, that packages in pkgsrc
                   6318: are portable. This chapter mentions some particular details you should pay
                   6319: attention to while working on pkgsrc.
                   6320: 
                   6321: 18.1.2. How to pull in user-settable variables from mk.conf
                   6322: 
                   6323: The pkgsrc user can configure pkgsrc by overriding several variables in the
1.4       rillig   6324: file pointed to by MAKECONF, which is mk.conf by default. When you want to use
                   6325: those variables in the preprocessor directives of make(1) (for example .if or
                   6326: .for), you need to include the file ../../mk/bsd.prefs.mk before, which in turn
                   6327: loads the user preferences.
1.1       dsieger  6328: 
                   6329: But note that some variables may not be completely defined after ../../mk/
                   6330: bsd.prefs.mk has been included, as they may contain references to variables
                   6331: that are not yet defined. In shell commands this is no problem, since variables
                   6332: are actually macros, which are only expanded when they are used. But in the
                   6333: preprocessor directives mentioned above and in dependency lines (of the form
                   6334: target: dependencies) the variables are expanded at load time.
                   6335: 
                   6336: Note
                   6337: 
                   6338: Currently there is no exhaustive list of all variables that tells you whether
                   6339: they can be used at load time or only at run time, but it is in preparation.
                   6340: 
                   6341: 18.1.3. User interaction
                   6342: 
                   6343: Occasionally, packages require interaction from the user, and this can be in a
                   6344: number of ways:
                   6345: 
                   6346:   * When fetching the distfiles, some packages require user interaction such as
                   6347:     entering username/password or accepting a license on a web page.
                   6348: 
                   6349:   * When extracting the distfiles, some packages may ask for passwords.
                   6350: 
                   6351:   * help to configure the package before it is built
                   6352: 
                   6353:   * help during the build process
                   6354: 
                   6355:   * help during the installation of a package
                   6356: 
                   6357: The INTERACTIVE_STAGE definition is provided to notify the pkgsrc mechanism of
                   6358: an interactive stage which will be needed, and this should be set in the
                   6359: package's Makefile, e.g.:
                   6360: 
                   6361: INTERACTIVE_STAGE=      build
                   6362: 
                   6363: 
                   6364: Multiple interactive stages can be specified:
                   6365: 
                   6366: INTERACTIVE_STAGE=      configure install
                   6367: 
                   6368: 
                   6369: The user can then decide to skip this package by setting the BATCH variable.
                   6370: 
                   6371: 18.1.4. Handling licenses
                   6372: 
                   6373: Authors of software can choose the licence under which software can be copied.
                   6374: This is due to copyright law, and reasons for license choices are outside the
                   6375: scope of pkgsrc. The pkgsrc system recognizes that there are a number of
                   6376: licenses which some users may find objectionable or difficult or impossible to
                   6377: comply with. The Free Software Foundation has declared some licenses "Free",
                   6378: and the Open Source Initiative has a definition of "Open Source". The pkgsrc
                   6379: system, as a policy choice, does not label packages which have licenses that
                   6380: are Free or Open Source. However, packages without a license meeting either of
                   6381: those tests are labeled with a license tag denoting the license. Note that a
                   6382: package with no license to copy trivially does not meet either the Free or Open
                   6383: Source test.
                   6384: 
                   6385: For packages which are not Free or Open Source, pkgsrc will not build the
                   6386: package unless the user has indicated to pkgsrc that packages with that
                   6387: particular license may be built. Note that this documentation avoids the term
                   6388: "accepted the license". The pkgsrc system is merely providing a mechanism to
                   6389: avoid accidentally building a package with a non-free license; judgement and
                   6390: responsibility remain with the user. (Installation of binary packages are not
                   6391: currently subject to this mechanism; this is a bug.)
                   6392: 
                   6393: One might want to only install packages with a BSD license, or the GPL, and not
                   6394: the other. The pkgsrc license tag mechanism does not provide a way to do this.
                   6395: It might be possible to put in tags for free licenses, and have a default
                   6396: ACCEPTABLE_LICENSES variable value, but this is widely viewed as having a very
                   6397: poor ratio of benefit to work.
                   6398: 
                   6399: The license tag mechanism is intended to address copyright-related issues
                   6400: surrounding building, installing and using a package, and not to address
                   6401: redistribution issues (see RESTRICTED and NO_SRC_ON_FTP, etc.). However, the
                   6402: above definition of licenses for which tags are not needed implies that
                   6403: packages with redistribution restrictions should have tags, because Free or
                   6404: Open Source programs do not have redistribution restrictions.
                   6405: 
                   6406: Denoting that a package may be copied according to a particular license is done
                   6407: by placing the license in pkgsrc/licenses and setting the LICENSE variable to a
                   6408: string identifying the license, e.g. in graphics/xv:
                   6409: 
                   6410: LICENSE=        xv-license
                   6411: 
                   6412: 
                   6413: When trying to build, the user will get a notice that the package is covered by
                   6414: a license which has not been placed in the ACCEPTABLE_LICENSES variable:
                   6415: 
                   6416: % make
                   6417: ===> xv-3.10anb9 has an unacceptable license: xv-license.
                   6418: ===>     To view the license, enter "/usr/bin/make show-license".
                   6419: ===>     To indicate acceptance, add this line to your /etc/mk.conf:
                   6420: ===>     ACCEPTABLE_LICENSES+=xv-license
                   6421: *** Error code 1
                   6422: 
                   6423: 
                   6424: The license can be viewed with make show-license, and if the user so chooses,
1.4       rillig   6425: the line printed above can be added to mk.conf to convey to pkgsrc that it
1.1       dsieger  6426: should not in the future fail because of that license:
                   6427: 
                   6428: ACCEPTABLE_LICENSES+=xv-license
                   6429: 
                   6430: 
                   6431: When adding a package with a new license, the license text should be added to
                   6432: pkgsrc/licenses for displaying. A list of known licenses can be seen in this
                   6433: directory.
                   6434: 
                   6435: When the license changes (in a way other than formatting), please make sure
                   6436: that the new license has a different name (e.g., append the version number if
                   6437: it exists, or the date). Just because a user told pkgsrc to build programs
                   6438: under a previous version of a license does not mean that pkgsrc should build
                   6439: programs under the new licenses. The higher-level point is that pkgsrc does not
                   6440: evaluate licenses for reasonableness; the only test is a mechanistic test of
                   6441: whether a particular text has been approved by either of two bodies.
                   6442: 
                   6443: The use of LICENSE=shareware, LICENSE=no-commercial-use, and similar language
                   6444: is deprecated because it does not crisply refer to a particular license text.
                   6445: Another problem with such usage is that it does not enable a user to tell
                   6446: pkgsrc to proceed for a single package without also telling pkgsrc to proceed
                   6447: for all packages with that tag.
                   6448: 
                   6449: 18.1.5. Restricted packages
                   6450: 
                   6451: Some licenses restrict how software may be re-distributed. Because a license
                   6452: tag is required unless the package is Free or Open Source, all packages with
                   6453: restrictions should have license tags. By declaring the restrictions, package
                   6454: tools can automatically refrain from e.g. placing binary packages on FTP sites.
                   6455: 
                   6456: There are four restrictions that may be encoded, which are the cross product of
                   6457: sources (distfiles) and binaries not being placed on FTP sites and CD-ROMs.
                   6458: Because this is rarely the exact language in any license, and because non-Free
                   6459: licenses tend to be different from each other, pkgsrc adopts a definition of
                   6460: FTP and CD-ROM. Pkgsrc uses "FTP" to mean that the source or binary file should
                   6461: not be made available over the Internet at no charge. Pkgsrc uses "CD-ROM" to
                   6462: mean that the source or binary may not be made available on some kind of media,
                   6463: together with other source and binary packages, and which is sold for a
                   6464: distribution charge.
                   6465: 
                   6466: In order to encode these restrictions, the package system defines five make
                   6467: variables that can be set to note these restrictions:
                   6468: 
                   6469:   * RESTRICTED
                   6470: 
                   6471:     This variable should be set whenever a restriction exists (regardless of
                   6472:     its kind). Set this variable to a string containing the reason for the
                   6473:     restriction. It should be understood that those wanting to understand the
                   6474:     restriction will have to read the license, and perhaps seek advice of
                   6475:     counsel.
                   6476: 
                   6477:   * NO_BIN_ON_CDROM
                   6478: 
                   6479:     Binaries may not be placed on CD-ROM containing other binary packages, for
                   6480:     which a distribution charge may be made. In this case, set this variable to
                   6481:     ${RESTRICTED}.
                   6482: 
                   6483:   * NO_BIN_ON_FTP
                   6484: 
                   6485:     Binaries may not made available on the Internet without charge. In this
                   6486:     case, set this variable to ${RESTRICTED}. If this variable is set, binary
                   6487:     packages will not be included on ftp.NetBSD.org.
                   6488: 
                   6489:   * NO_SRC_ON_CDROM
                   6490: 
                   6491:     Distfiles may not be placed on CD-ROM, together with other distfiles, for
                   6492:     which a fee may be charged. In this case, set this variable to $
                   6493:     {RESTRICTED}.
                   6494: 
                   6495:   * NO_SRC_ON_FTP
                   6496: 
                   6497:     Distfiles may not made available via FTP at no charge. In this case, set
                   6498:     this variable to ${RESTRICTED}. If this variable is set, the distfile(s)
                   6499:     will not be mirrored on ftp.NetBSD.org.
                   6500: 
                   6501: Please note that the use of NO_PACKAGE, IGNORE, NO_CDROM, or other generic make
                   6502: variables to denote restrictions is deprecated, because they unconditionally
                   6503: prevent users from generating binary packages!
                   6504: 
                   6505: 18.1.6. Handling dependencies
                   6506: 
                   6507: Your package may depend on some other package being present - and there are
                   6508: various ways of expressing this dependency. pkgsrc supports the BUILD_DEPENDS
                   6509: and DEPENDS definitions, the USE_TOOLS definition, as well as dependencies via
                   6510: buildlink3.mk, which is the preferred way to handle dependencies, and which
                   6511: uses the variables named above. See Chapter 13, Buildlink methodology for more
                   6512: information.
                   6513: 
                   6514: The basic difference between the two variables is as follows: The DEPENDS
                   6515: definition registers that pre-requisite in the binary package so it will be
                   6516: pulled in when the binary package is later installed, whilst the BUILD_DEPENDS
                   6517: definition does not, marking a dependency that is only needed for building the
                   6518: package.
                   6519: 
                   6520: This means that if you only need a package present whilst you are building, it
                   6521: should be noted as a BUILD_DEPENDS.
                   6522: 
                   6523: The format for a BUILD_DEPENDS and a DEPENDS definition is:
                   6524: 
                   6525: <pre-req-package-name>:../../<category>/<pre-req-package>
                   6526: 
                   6527: 
                   6528: Please note that the "pre-req-package-name" may include any of the wildcard
                   6529: version numbers recognized by pkg_info(1).
                   6530: 
                   6531:  1. If your package needs another package's binaries or libraries to build or
                   6532:     run, and if that package has a buildlink3.mk file available, use it:
                   6533: 
                   6534:     .include "../../graphics/jpeg/buildlink3.mk"
                   6535: 
                   6536: 
                   6537:  2. If your package needs to use another package to build itself and there is
                   6538:     no buildlink3.mk file available, use the BUILD_DEPENDS definition:
                   6539: 
                   6540:     BUILD_DEPENDS+= autoconf-2.13:../../devel/autoconf
                   6541: 
                   6542: 
                   6543:  3. If your package needs a library with which to link and again there is no
                   6544:     buildlink3.mk file available, this is specified using the DEPENDS
                   6545:     definition. For example:
                   6546: 
                   6547:     DEPENDS+=       xpm-3.4j:../../graphics/xpm
                   6548: 
                   6549: 
                   6550:     You can also use wildcards in package dependences:
                   6551: 
                   6552:     DEPENDS+=       xpm-[0-9]*:../../graphics/xpm
                   6553: 
                   6554: 
                   6555:     Note that such wildcard dependencies are retained when creating binary
                   6556:     packages. The dependency is checked when installing the binary package and
                   6557:     any package which matches the pattern will be used. Wildcard dependencies
                   6558:     should be used with care.
                   6559: 
                   6560:     The "-[0-9]*" should be used instead of "-*" to avoid potentially ambiguous
                   6561:     matches such as "tk-postgresql" matching a "tk-*" DEPENDS.
                   6562: 
                   6563:     Wildcards can also be used to specify that a package will only build
                   6564:     against a certain minimum version of a pre-requisite:
                   6565: 
                   6566:     DEPENDS+=       tiff>=3.5.4:../../graphics/tiff
                   6567: 
                   6568: 
                   6569:     This means that the package will build against version 3.5.4 of the tiff
                   6570:     library or newer. Such a dependency may be warranted if, for example, the
                   6571:     API of the library has changed with version 3.5.4 and a package would not
                   6572:     compile against an earlier version of tiff.
                   6573: 
                   6574:     Please note that such dependencies should only be updated if a package
                   6575:     requires a newer pre-requisite, but not to denote recommendations such as
                   6576:     ABI changes that do not prevent a package from building correctly. Such
                   6577:     recommendations can be expressed using ABI_DEPENDS:
                   6578: 
                   6579:     ABI_DEPENDS+=   tiff>=3.6.1:../../graphics/tiff
                   6580: 
                   6581: 
                   6582:     In addition to the above DEPENDS line, this denotes that while a package
                   6583:     will build against tiff>=3.5.4, at least version 3.6.1 is recommended.
                   6584:     ABI_DEPENDS entries will be turned into dependencies unless explicitly
                   6585:     ignored (in which case a warning will be printed).
                   6586: 
                   6587:     To ignore these ABI dependency recommendations and just use the required
                   6588:     DEPENDS, set USE_ABI_DEPENDS=NO. This may make it easier and faster to
                   6589:     update packages built using pkgsrc, since older compatible dependencies can
                   6590:     continue to be used. This is useful for people who watch their rebuilds
                   6591:     very carefully; it is not very good as a general-purpose hammer. If you use
                   6592:     it, you need to be mindful of possible ABI changes, including those from
                   6593:     the underlying OS.
                   6594: 
                   6595:     Packages that are built with recommendations ignored may not be uploaded to
                   6596:     ftp.NetBSD.org by developers and should not be used across different
                   6597:     systems that may have different versions of binary packages installed.
                   6598: 
                   6599:     For security fixes, please update the package vulnerabilities file. See
                   6600:     Section 18.1.10, "Handling packages with security problems" for more
                   6601:     information.
                   6602: 
                   6603:  4. If your package needs some executable to be able to run correctly and if
                   6604:     there's no buildlink3.mk file, this is specified using the DEPENDS
                   6605:     variable. The print/lyx package needs to be able to execute the latex
                   6606:     binary from the teTeX package when it runs, and that is specified:
                   6607: 
                   6608:     DEPENDS+=        teTeX-[0-9]*:../../print/teTeX
                   6609: 
                   6610: 
                   6611:     The comment about wildcard dependencies from previous paragraph applies
                   6612:     here, too.
                   6613: 
                   6614: If your package needs files from another package to build, add the relevant
                   6615: distribution files to DISTFILES, so they will be extracted automatically. See
                   6616: the print/ghostscript package for an example. (It relies on the jpeg sources
                   6617: being present in source form during the build.)
                   6618: 
                   6619: 18.1.7. Handling conflicts with other packages
                   6620: 
                   6621: Your package may conflict with other packages a user might already have
                   6622: installed on his system, e.g. if your package installs the same set of files as
                   6623: another package in the pkgsrc tree.
                   6624: 
                   6625: In this case you can set CONFLICTS to a space-separated list of packages
                   6626: (including version string) your package conflicts with.
                   6627: 
                   6628: For example, x11/Xaw3d and x11/Xaw-Xpm install the same shared library, thus
                   6629: you set in pkgsrc/x11/Xaw3d/Makefile:
                   6630: 
                   6631: CONFLICTS=      Xaw-Xpm-[0-9]*
                   6632: 
                   6633: 
                   6634: and in pkgsrc/x11/Xaw-Xpm/Makefile:
                   6635: 
                   6636: CONFLICTS=      Xaw3d-[0-9]*
                   6637: 
                   6638: 
                   6639: Packages will automatically conflict with other packages with the name prefix
                   6640: and a different version string. "Xaw3d-1.5" e.g. will automatically conflict
                   6641: with the older version "Xaw3d-1.3".
                   6642: 
                   6643: 18.1.8. Packages that cannot or should not be built
                   6644: 
                   6645: There are several reasons why a package might be instructed to not build under
                   6646: certain circumstances. If the package builds and runs on most platforms, the
                   6647: exceptions should be noted with NOT_FOR_PLATFORM. If the package builds and
                   6648: runs on a small handful of platforms, set ONLY_FOR_PLATFORM instead. Both
                   6649: ONLY_FOR_PLATFORM and NOT_FOR_PLATFORM are OS triples (OS-version-platform)
                   6650: that can use glob-style wildcards.
                   6651: 
                   6652: Some packages are tightly bound to a specific version of an operating system,
                   6653: e.g. LKMs or sysutils/lsof. Such binary packages are not backwards compatible
                   6654: with other versions of the OS, and should be uploaded to a version specific
                   6655: directory on the FTP server. Mark these packages by setting OSVERSION_SPECIFIC
                   6656: to "yes". This variable is not currently used by any of the package system
                   6657: internals, but may be used in the future.
                   6658: 
                   6659: If the package should be skipped (for example, because it provides
                   6660: functionality already provided by the system), set PKG_SKIP_REASON to a
                   6661: descriptive message. If the package should fail because some preconditions are
                   6662: not met, set PKG_FAIL_REASON to a descriptive message.
                   6663: 
                   6664: 18.1.9. Packages which should not be deleted, once installed
                   6665: 
                   6666: To ensure that a package may not be deleted, once it has been installed, the
                   6667: PKG_PRESERVE definition should be set in the package Makefile. This will be
                   6668: carried into any binary package that is made from this pkgsrc entry. A
                   6669: "preserved" package will not be deleted using pkg_delete(1) unless the "-f"
                   6670: option is used.
                   6671: 
                   6672: 18.1.10. Handling packages with security problems
                   6673: 
                   6674: When a vulnerability is found, this should be noted in localsrc/security/
                   6675: advisories/pkg-vulnerabilities, and after committing that file, use make upload
                   6676: in the same directory to update the file on ftp.NetBSD.org.
                   6677: 
                   6678: After fixing the vulnerability by a patch, its PKGREVISION should be increased
                   6679: (this is of course not necessary if the problem is fixed by using a newer
                   6680: release of the software).
                   6681: 
                   6682: Also, if the fix should be applied to the stable pkgsrc branch, be sure to
                   6683: submit a pullup request!
                   6684: 
                   6685: Binary packages already on ftp.NetBSD.org will be handled semi-automatically by
                   6686: a weekly cron job.
                   6687: 
                   6688: 18.1.11. How to handle incrementing versions when fixing an existing package
                   6689: 
                   6690: When making fixes to an existing package it can be useful to change the version
                   6691: number in PKGNAME. To avoid conflicting with future versions by the original
                   6692: author, a "nb1", "nb2", ... suffix can be used on package versions by setting
                   6693: PKGREVISION=1 (2, ...). The "nb" is treated like a "." by the package tools.
                   6694: e.g.
                   6695: 
                   6696: DISTNAME=       foo-17.42
                   6697: PKGREVISION=    9
                   6698: 
                   6699: 
                   6700: will result in a PKGNAME of "foo-17.42nb9". If you want to use the original
                   6701: value of PKGNAME without the "nbX" suffix, e.g. for setting DIST_SUBDIR, use
                   6702: PKGNAME_NOREV.
                   6703: 
                   6704: When a new release of the package is released, the PKGREVISION should be
                   6705: removed, e.g. on a new minor release of the above package, things should be
                   6706: like:
                   6707: 
                   6708: DISTNAME=       foo-17.43
                   6709: 
                   6710: 
                   6711: PKGREVISION should be incremented for any non-trivial change in the resulting
                   6712: binary package. Without a PKGREVISION bump, someone with the previous version
                   6713: installed has no way of knowing that their package is out of date. Thus,
                   6714: changes without increasing PKGREVISION are essentially labeled "this is so
                   6715: trivial that no reasonable person would want to upgrade", and this is the rough
                   6716: test for when increasing PKGREVISION is appropriate. Examples of changes that
                   6717: do not merit increasing PKGREVISION are:
                   6718: 
                   6719:   * Changing HOMEPAGE, MAINTAINER, or comments in Makefile.
                   6720: 
                   6721:   * Changing build variables if the resulting binary package is the same.
                   6722: 
                   6723:   * Changing DESCR.
                   6724: 
                   6725:   * Adding PKG_OPTIONS if the default options don't change.
                   6726: 
                   6727: Examples of changes that do merit an increase to PKGREVISION include:
                   6728: 
                   6729:   * Security fixes
                   6730: 
                   6731:   * Changes or additions to a patch file
                   6732: 
                   6733:   * Changes to the PLIST
                   6734: 
                   6735: PKGREVISION must also be incremented when dependencies have ABI changes.
                   6736: 
                   6737: 18.1.12. Substituting variable text in the package files (the SUBST framework)
                   6738: 
                   6739: When you want to replace the same text in multiple files or when the
                   6740: replacement text varies, patches alone cannot help. This is where the SUBST
                   6741: framework comes in. It provides an easy-to-use interface for replacing text in
                   6742: files. Example:
                   6743: 
                   6744: SUBST_CLASSES+=                 fix-paths
                   6745: SUBST_STAGE.fix-paths=          pre-configure
                   6746: SUBST_MESSAGE.fix-paths=        Fixing absolute paths.
                   6747: SUBST_FILES.fix-paths=          src/*.c
                   6748: SUBST_FILES.fix-paths+=         scripts/*.sh
                   6749: SUBST_SED.fix-paths=            -e 's,"/usr/local,"${PREFIX},g'
                   6750: SUBST_SED.fix-paths+=           -e 's,"/var/log,"${VARBASE}/log,g'
                   6751: 
                   6752: 
                   6753: SUBST_CLASSES is a list of identifiers that are used to identify the different
                   6754: SUBST blocks that are defined. The SUBST framework is heavily used by pkgsrc,
                   6755: so it is important to always use the += operator with this variable. Otherwise
                   6756: some substitutions may be skipped.
                   6757: 
                   6758: The remaining variables of each SUBST block are parameterized with the
                   6759: identifier from the first line (fix-paths in this case.) They can be seen as
                   6760: parameters to a function call.
                   6761: 
                   6762: SUBST_STAGE.* specifies the stage at which the replacement will take place. All
                   6763: combinations of pre-, do- and post- together with a phase name are possible,
                   6764: though only few are actually used. Most commonly used are post-patch and
                   6765: pre-configure. Of these two, pre-configure should be preferred because then it
                   6766: is possible to run bmake patch and have the state after applying the patches
                   6767: but before making any other changes. This is especially useful when you are
                   6768: debugging a package in order to create new patches for it. Similarly,
                   6769: post-build is preferred over pre-install, because the install phase should
                   6770: generally be kept as simple as possible. When you use post-build, you have the
                   6771: same files in the working directory that will be installed later, so you can
                   6772: check if the substitution has succeeded.
                   6773: 
                   6774: SUBST_MESSAGE.* is an optional text that is printed just before the
                   6775: substitution is done.
                   6776: 
                   6777: SUBST_FILES.* is the list of shell globbing patterns that specifies the files
                   6778: in which the substitution will take place. The patterns are interpreted
                   6779: relatively to the WRKSRC directory.
                   6780: 
                   6781: SUBST_SED.* is a list of arguments to sed(1) that specify the actual
                   6782: substitution. Every sed command should be prefixed with -e, so that all SUBST
                   6783: blocks look uniform.
                   6784: 
                   6785: There are some more variables, but they are so seldomly used that they are only
                   6786: documented in the mk/subst.mk file.
                   6787: 
                   6788: 18.2. Fixing problems in the fetch phase
                   6789: 
                   6790: 18.2.1. Packages whose distfiles aren't available for plain downloading
                   6791: 
                   6792: If you need to download from a dynamic URL you can set DYNAMIC_MASTER_SITES and
                   6793: a make fetch will call files/getsite.sh with the name of each file to download
                   6794: as an argument, expecting it to output the URL of the directory from which to
                   6795: download it. graphics/ns-cult3d is an example of this usage.
                   6796: 
                   6797: If the download can't be automated, because the user must submit personal
                   6798: information to apply for a password, or must pay for the source, or whatever,
                   6799: you can set FETCH_MESSAGE to a list of lines that are displayed to the user
                   6800: before aborting the build. Example:
                   6801: 
                   6802: FETCH_MESSAGE=  "Please download the files"
                   6803: FETCH_MESSAGE+= "    "${DISTFILES:Q}
                   6804: FETCH_MESSAGE+= "manually from "${MASTER_SITES:Q}"."
                   6805: 
                   6806: 
                   6807: 18.2.2. How to handle modified distfiles with the 'old' name
                   6808: 
                   6809: Sometimes authors of a software package make some modifications after the
                   6810: software was released, and they put up a new distfile without changing the
                   6811: package's version number. If a package is already in pkgsrc at that time, the
                   6812: checksum will no longer match. The contents of the new distfile should be
                   6813: compared against the old one before changing anything, to make sure the
                   6814: distfile was really updated on purpose, and that no trojan horse or so crept
                   6815: in. Please mention that the distfiles were compared and what was found in your
                   6816: commit message. Then, the correct way to work around this is to set DIST_SUBDIR
                   6817: to a unique directory name, usually based on PKGNAME_NOREV. All DISTFILES and
                   6818: PATCHFILES for this package will be put in that subdirectory of the local
                   6819: distfiles directory. (See Section 18.1.11, "How to handle incrementing versions
                   6820: when fixing an existing package" for more details.) In case this happens more
                   6821: often, PKGNAME can be used (thus including the nbX suffix) or a date stamp can
                   6822: be appended, like ${PKGNAME_NOREV}-YYYYMMDD. Do not forget regenerating the
                   6823: distinfo file after that, since it contains the DIST_SUBDIR path in the
                   6824: filenames. Also increase the PKGREVISION if the installed package is different.
                   6825: Furthermore, a mail to the package's authors seems appropriate telling them
                   6826: that changing distfiles after releases without changing the file names is not
                   6827: good practice.
                   6828: 
                   6829: 18.3. Fixing problems in the configure phase
                   6830: 
                   6831: 18.3.1. Shared libraries - libtool
                   6832: 
                   6833: pkgsrc supports many different machines, with different object formats like
                   6834: a.out and ELF, and varying abilities to do shared library and dynamic loading
                   6835: at all. To accompany this, varying commands and options have to be passed to
                   6836: the compiler, linker, etc. to get the Right Thing, which can be pretty annoying
                   6837: especially if you don't have all the machines at your hand to test things. The
                   6838: devel/libtool pkg can help here, as it just "knows" how to build both static
                   6839: and dynamic libraries from a set of source files, thus being
                   6840: platform-independent.
                   6841: 
                   6842: Here's how to use libtool in a package in seven simple steps:
                   6843: 
                   6844:  1. Add USE_LIBTOOL=yes to the package Makefile.
                   6845: 
                   6846:  2. For library objects, use "${LIBTOOL} --mode=compile ${CC}" in place of "$
                   6847:     {CC}". You could even add it to the definition of CC, if only libraries are
                   6848:     being built in a given Makefile. This one command will build both PIC and
                   6849:     non-PIC library objects, so you need not have separate shared and
                   6850:     non-shared library rules.
                   6851: 
                   6852:  3. For the linking of the library, remove any "ar", "ranlib", and "ld
                   6853:     -Bshareable" commands, and instead use:
                   6854: 
                   6855:     ${LIBTOOL} --mode=link \
                   6856:         ${CC} -o ${.TARGET:.a=.la} \
                   6857:             ${OBJS:.o=.lo} \
                   6858:             -rpath ${PREFIX}/lib \
                   6859:             -version-info major:minor
                   6860: 
                   6861: 
                   6862:     Note that the library is changed to have a .la extension, and the objects
                   6863:     are changed to have a .lo extension. Change OBJS as necessary. This
                   6864:     automatically creates all of the .a, .so.major.minor, and ELF symlinks (if
                   6865:     necessary) in the build directory. Be sure to include "-version-info",
                   6866:     especially when major and minor are zero, as libtool will otherwise strip
                   6867:     off the shared library version.
                   6868: 
                   6869:     From the libtool manual:
                   6870: 
                   6871:     So, libtool library versions are described by three integers:
                   6872: 
                   6873:     CURRENT
                   6874:     The most recent interface number that this library implements.
                   6875: 
                   6876:     REVISION
                   6877:     The implementation number of the CURRENT interface.
                   6878: 
                   6879:     AGE
                   6880:     The difference between the newest and oldest interfaces that
                   6881:     this library implements.  In other words, the library implements
                   6882:     all the interface numbers in the range from number `CURRENT -
                   6883:     AGE' to `CURRENT'.
                   6884: 
                   6885:     If two libraries have identical CURRENT and AGE numbers, then the
                   6886:     dynamic linker chooses the library with the greater REVISION number.
                   6887: 
                   6888: 
                   6889:     The "-release" option will produce different results for a.out and ELF
                   6890:     (excluding symlinks) in only one case. An ELF library of the form
                   6891:     "libfoo-release.so.x.y" will have a symlink of "libfoo.so.x.y" on an a.out
                   6892:     platform. This is handled automatically.
                   6893: 
                   6894:     The "-rpath argument" is the install directory of the library being built.
                   6895: 
                   6896:     In the PLIST, include only the .la file, the other files will be added
                   6897:     automatically.
                   6898: 
                   6899:  4. When linking shared object (.so) files, i.e. files that are loaded via
                   6900:     dlopen(3), NOT shared libraries, use "-module -avoid-version" to prevent
                   6901:     them getting version tacked on.
                   6902: 
                   6903:     The PLIST file gets the foo.so entry.
                   6904: 
                   6905:  5. When linking programs that depend on these libraries before they are
                   6906:     installed, preface the cc(1) or ld(1) line with "${LIBTOOL} --mode=link",
                   6907:     and it will find the correct libraries (static or shared), but please be
                   6908:     aware that libtool will not allow you to specify a relative path in -L
                   6909:     (such as "-L../somelib"), because it expects you to change that argument to
                   6910:     be the .la file. e.g.
                   6911: 
                   6912:     ${LIBTOOL} --mode=link ${CC} -o someprog -L../somelib -lsomelib
                   6913: 
                   6914: 
                   6915:     should be changed to:
                   6916: 
                   6917:     ${LIBTOOL} --mode=link ${CC} -o someprog ../somelib/somelib.la
                   6918: 
                   6919: 
                   6920:     and it will do the right thing with the libraries.
                   6921: 
                   6922:  6. When installing libraries, preface the install(1) or cp(1) command with "$
                   6923:     {LIBTOOL} --mode=install", and change the library name to .la. e.g.
                   6924: 
                   6925:     ${LIBTOOL} --mode=install ${BSD_INSTALL_DATA} ${SOMELIB:.a=.la} ${PREFIX}/lib
                   6926: 
                   6927: 
                   6928:     This will install the static .a, shared library, any needed symlinks, and
                   6929:     run ldconfig(8).
                   6930: 
                   6931:  7. In your PLIST, include only the .la file (this is a change from previous
                   6932:     behaviour).
                   6933: 
                   6934: 18.3.2. Using libtool on GNU packages that already support libtool
                   6935: 
                   6936: Add USE_LIBTOOL=yes to the package Makefile. This will override the package's
                   6937: own libtool in most cases. For older libtool using packages, libtool is made by
                   6938: ltconfig script during the do-configure step; you can check the libtool script
                   6939: location by doing make configure; find work*/ -name libtool.
                   6940: 
                   6941: LIBTOOL_OVERRIDE specifies which libtool scripts, relative to WRKSRC, to
                   6942: override. By default, it is set to "libtool */libtool */*/libtool". If this
                   6943: does not match the location of the package's libtool script(s), set it as
                   6944: appropriate.
                   6945: 
                   6946: If you do not need *.a static libraries built and installed, then use
                   6947: SHLIBTOOL_OVERRIDE instead.
                   6948: 
                   6949: If your package makes use of the platform-independent library for loading
                   6950: dynamic shared objects, that comes with libtool (libltdl), you should include
                   6951: devel/libltdl/buildlink3.mk.
                   6952: 
                   6953: Some packages use libtool incorrectly so that the package may not work or build
                   6954: in some circumstances. Some of the more common errors are:
                   6955: 
                   6956:   * The inclusion of a shared object (-module) as a dependent library in an
                   6957:     executable or library. This in itself isn't a problem if one of two things
                   6958:     has been done:
                   6959: 
                   6960:      1. The shared object is named correctly, i.e. libfoo.la, not foo.la
                   6961: 
                   6962:      2. The -dlopen option is used when linking an executable.
                   6963: 
                   6964:   * The use of libltdl without the correct calls to initialisation routines.
                   6965:     The function lt_dlinit() should be called and the macro
                   6966:     LTDL_SET_PRELOADED_SYMBOLS included in executables.
                   6967: 
                   6968: 18.3.3. GNU Autoconf/Automake
                   6969: 
                   6970: If a package needs GNU autoconf or automake to be executed to regenerate the
                   6971: configure script and Makefile.in makefile templates, then they should be
                   6972: executed in a pre-configure target.
                   6973: 
                   6974: For packages that need only autoconf:
                   6975: 
                   6976: AUTOCONF_REQD=  2.50            # if default version is not good enough
                   6977: USE_TOOLS+=     autoconf        # use "autoconf213" for autoconf-2.13
                   6978: ...
                   6979: 
                   6980: pre-configure:
                   6981:         cd ${WRKSRC} && autoconf
                   6982: 
                   6983: ...
                   6984: 
                   6985: 
                   6986: and for packages that need automake and autoconf:
                   6987: 
                   6988: AUTOMAKE_REQD=  1.7.1           # if default version is not good enough
                   6989: USE_TOOLS+=     automake        # use "automake14" for automake-1.4
                   6990: ...
                   6991: 
                   6992: pre-configure:
                   6993:         set -e; cd ${WRKSRC}; \
                   6994:         aclocal; autoheader; automake -a --foreign -i; autoconf
                   6995: 
                   6996: ...
                   6997: 
                   6998: 
                   6999: Packages which use GNU Automake will almost certainly require GNU Make.
                   7000: 
                   7001: There are times when the configure process makes additional changes to the
                   7002: generated files, which then causes the build process to try to re-execute the
                   7003: automake sequence. This is prevented by touching various files in the configure
                   7004: stage. If this causes problems with your package you can set AUTOMAKE_OVERRIDE=
                   7005: NO in the package Makefile.
                   7006: 
                   7007: 18.4. Programming languages
                   7008: 
                   7009: 18.4.1. C, C++, and Fortran
                   7010: 
                   7011: Compilers for the C, C++, and Fortran languages comes with the NetBSD base
                   7012: system. By default, pkgsrc assumes that a package is written in C and will hide
                   7013: all other compilers (via the wrapper framework, see Chapter 13, Buildlink
                   7014: methodology).
                   7015: 
                   7016: To declare which language's compiler a package needs, set the USE_LANGUAGES
                   7017: variable. Allowed values currently are "c", "c++", and "fortran" (and any
                   7018: combination). The default is "c". Packages using GNU configure scripts, even if
                   7019: written in C++, usually need a C compiler for the configure phase.
                   7020: 
                   7021: 18.4.2. Java
                   7022: 
                   7023: If a program is written in Java, use the Java framework in pkgsrc. The package
                   7024: must include ../../mk/java-vm.mk. This Makefile fragment provides the following
                   7025: variables:
                   7026: 
                   7027:   * USE_JAVA defines if a build dependency on the JDK is added. If USE_JAVA is
                   7028:     set to "run", then there is only a runtime dependency on the JDK. The
                   7029:     default is "yes", which also adds a build dependency on the JDK.
                   7030: 
                   7031:   * Set USE_JAVA2 to declare that a package needs a Java2 implementation. The
                   7032:     supported values are "yes", "1.4", and "1.5". "yes" accepts any Java2
                   7033:     implementation, "1.4" insists on versions 1.4 or above, and "1.5" only
                   7034:     accepts versions 1.5 or above. This variable is not set by default.
                   7035: 
                   7036: 18.4.3. Packages containing perl scripts
                   7037: 
                   7038: If your package contains interpreted perl scripts, add "perl" to the USE_TOOLS
                   7039: variable and set REPLACE_PERL to ensure that the proper interpreter path is
                   7040: set. REPLACE_PERL should contain a list of scripts, relative to WRKSRC, that
                   7041: you want adjusted. Every occurrence of */bin/perl will be replaced with the
                   7042: full path to the perl executable.
                   7043: 
                   7044: If a particular version of perl is needed, set the PERL5_REQD variable to the
                   7045: version number. The default is "5.0".
                   7046: 
1.4       rillig   7047: See Section 18.6.6, "Packages installing perl modules" for information about
1.1       dsieger  7048: handling perl modules.
                   7049: 
                   7050: 18.4.4. Other programming languages
                   7051: 
                   7052: Currently, there is no special handling for other languages in pkgsrc. If a
                   7053: compiler package provides a buildlink3.mk file, include that, otherwise just
                   7054: add a (build) dependency on the appropriate compiler package.
                   7055: 
                   7056: 18.5. Fixing problems in the build phase
                   7057: 
                   7058: The most common failures when building a package are that some platforms do not
                   7059: provide certain header files, functions or libraries, or they provide the
                   7060: functions in a library that the original package author didn't know. To work
                   7061: around this, you can rewrite the source code in most cases so that it does not
                   7062: use the missing functions or provides a replacement function.
                   7063: 
                   7064: 18.5.1. Compiling C and C++ code conditionally
                   7065: 
                   7066: If a package already comes with a GNU configure script, the preferred way to
                   7067: fix the build failure is to change the configure script, not the code. In the
                   7068: other cases, you can utilize the C preprocessor, which defines certain macros
                   7069: depending on the operating system and hardware architecture it compiles for.
                   7070: These macros can be queried using for example #if defined(__i386). Almost every
                   7071: operating system, hardware architecture and compiler has its own macro. For
                   7072: example, if the macros __GNUC__, __i386__ and __NetBSD__ are all defined, you
                   7073: know that you are using NetBSD on an i386 compatible CPU, and your compiler is
                   7074: GCC.
                   7075: 
                   7076: The list of the following macros for hardware and operating system depends on
                   7077: the compiler that is used. For example, if you want to conditionally compile
                   7078: code on Solaris, don't use __sun__, as the SunPro compiler does not define it.
                   7079: Use __sun instead.
                   7080: 
                   7081: 18.5.1.1. C preprocessor macros to identify the operating system
                   7082: 
                   7083: To distinguish between 4.4 BSD-derived systems and the rest of the world, you
                   7084: should use the following code.
                   7085: 
                   7086: #include <sys/param.h>
                   7087: #if (defined(BSD) && BSD >= 199306)
                   7088: /* BSD-specific code goes here */
                   7089: #else
                   7090: /* non-BSD-specific code goes here */
                   7091: #endif
                   7092: 
                   7093: If this distinction is not fine enough, you can also test for the following
                   7094: macros.
                   7095: 
                   7096: FreeBSD     __FreeBSD__
                   7097: DragonFly   __DragonFly__
                   7098: Interix     __INTERIX
                   7099: IRIX        __sgi (TODO: get a definite source for this)
                   7100: Linux       linux, __linux, __linux__
                   7101: NetBSD      __NetBSD__
                   7102: OpenBSD     __OpenBSD__
                   7103: Solaris     sun, __sun
                   7104: 
                   7105: 18.5.1.2. C preprocessor macros to identify the hardware architecture
                   7106: 
                   7107: i386        i386, __i386, __i386__
                   7108: MIPS        __mips
                   7109: SPARC       sparc, __sparc
                   7110: 
                   7111: 18.5.1.3. C preprocessor macros to identify the compiler
                   7112: 
                   7113: GCC         __GNUC__ (major version), __GNUC_MINOR__
                   7114: MIPSpro     _COMPILER_VERSION (0x741 for MIPSpro 7.41)
                   7115: SunPro      __SUNPRO_C (0x570 for Sun C 5.7)
                   7116: SunPro C++  __SUNPRO_CC (0x580 for Sun C++ 5.8)
                   7117: 
                   7118: 18.5.2. How to handle compiler bugs
                   7119: 
                   7120: Some source files trigger bugs in the compiler, based on combinations of
                   7121: compiler version and architecture and almost always relation to optimisation
                   7122: being enabled. Common symptoms are gcc internal errors or never finishing
                   7123: compiling a file.
                   7124: 
                   7125: Typically, a workaround involves testing the MACHINE_ARCH and compiler version,
                   7126: disabling optimisation for that combination of file, MACHINE_ARCH and compiler,
                   7127: and documenting it in pkgsrc/doc/HACKS. See that file for a number of examples.
                   7128: 
                   7129: 18.5.3. Undefined reference to "..."
                   7130: 
                   7131: This error message often means that a package did not link to a shared library
                   7132: it needs. The following functions are known to cause this error message over
                   7133: and over.
                   7134: 
                   7135: +-----------------------------------------------------+
                   7136: |        Function         |Library |Affected platforms|
                   7137: |-------------------------+--------+------------------|
                   7138: |accept, bind, connect    |-lsocket|Solaris           |
                   7139: |-------------------------+--------+------------------|
                   7140: |crypt                    |-lcrypt |DragonFly, NetBSD |
                   7141: |-------------------------+--------+------------------|
                   7142: |dlopen, dlsym            |-ldl    |Linux             |
                   7143: |-------------------------+--------+------------------|
                   7144: |gethost*                 |-lnsl   |Solaris           |
                   7145: |-------------------------+--------+------------------|
                   7146: |inet_aton                |-lresolv|Solaris           |
                   7147: |-------------------------+--------+------------------|
                   7148: |nanosleep, sem_*, timer_*|-lrt    |Solaris           |
                   7149: |-------------------------+--------+------------------|
                   7150: |openpty                  |-lutil  |Linux             |
                   7151: +-----------------------------------------------------+
                   7152: 
                   7153: To fix these linker errors, it is often sufficient to say LIBS.OperatingSystem+
                   7154: = -lfoo to the package Makefile and then say bmake clean; bmake.
                   7155: 
                   7156: 18.5.3.1. Special issue: The SunPro compiler
                   7157: 
                   7158: When you are using the SunPro compiler, there is another possibility. That
                   7159: compiler cannot handle the following code:
                   7160: 
                   7161: extern int extern_func(int);
                   7162: 
                   7163: static inline int
                   7164: inline_func(int x)
                   7165: {
                   7166:         return extern_func(x);
                   7167: }
                   7168: 
                   7169: int main(void)
                   7170: {
                   7171:         return 0;
                   7172: }
                   7173: 
                   7174: It generates the code for inline_func even if that function is never used. This
                   7175: code then refers to extern_func, which can usually not be resolved. To solve
                   7176: this problem you can try to tell the package to disable inlining of functions.
                   7177: 
                   7178: 18.5.4. Running out of memory
                   7179: 
                   7180: Sometimes packages fail to build because the compiler runs into an operating
                   7181: system specific soft limit. With the UNLIMIT_RESOURCES variable pkgsrc can be
                   7182: told to unlimit the resources. Currently, the allowed values are "datasize" and
                   7183: "stacksize" (or both). Setting this variable is similar to running the shell
                   7184: builtin ulimit command to raise the maximum data segment size or maximum stack
                   7185: size of a process, respectively, to their hard limits.
                   7186: 
                   7187: 18.6. Fixing problems in the install phase
                   7188: 
                   7189: 18.6.1. Creating needed directories
                   7190: 
                   7191: The BSD-compatible install supplied with some operating systems cannot create
                   7192: more than one directory at a time. As such, you should call ${INSTALL_*_DIR}
                   7193: like this:
                   7194: 
                   7195: ${INSTALL_DATA_DIR} ${PREFIX}/dir1
                   7196: ${INSTALL_DATA_DIR} ${PREFIX}/dir2
                   7197: 
                   7198: 
                   7199: You can also just append "dir1 dir2" to the INSTALLATION_DIRS variable, which
                   7200: will automatically do the right thing.
                   7201: 
                   7202: 18.6.2. Where to install documentation
                   7203: 
                   7204: In general, documentation should be installed into ${PREFIX}/share/doc/$
                   7205: {PKGBASE} or ${PREFIX}/share/doc/${PKGNAME} (the latter includes the version
                   7206: number of the package).
                   7207: 
                   7208: Many modern packages using GNU autoconf allow to set the directory where HTML
                   7209: documentation is installed with the "--with-html-dir" option. Sometimes using
                   7210: this flag is needed because otherwise the documentation ends up in ${PREFIX}/
                   7211: share/doc/html or other places.
                   7212: 
                   7213: An exception to the above is that library API documentation generated with the
                   7214: textproc/gtk-doc tools, for use by special browsers (devhelp) should be left at
                   7215: their default location, which is ${PREFIX}/share/gtk-doc. Such documentation
                   7216: can be recognized from files ending in .devhelp or .devhelp2. (It is also
                   7217: acceptable to install such files in ${PREFIX}/share/doc/${PKGBASE} or ${PREFIX}
                   7218: /share/doc/${PKGNAME}; the .devhelp* file must be directly in that directory
                   7219: then, no additional subdirectory level is allowed in this case. This is usually
                   7220: achieved by using "--with-html-dir=${PREFIX}/share/doc". ${PREFIX}/share/
                   7221: gtk-doc is preferred though.)
                   7222: 
                   7223: 18.6.3. Installing highscore files
                   7224: 
                   7225: Certain packages, most of them in the games category, install a score file that
                   7226: allows all users on the system to record their highscores. In order for this to
                   7227: work, the binaries need to be installed setgid and the score files owned by the
                   7228: appropriate group and/or owner (traditionally the "games" user/group). The
                   7229: following variables, documented in more detail in mk/defaults/mk.conf, control
                   7230: this behaviour: SETGIDGAME, GAMEDATAMODE, GAMEGRP, GAMEMODE, GAMEOWN.
                   7231: 
                   7232: Note that per default, setgid installation of games is disabled; setting
                   7233: SETGIDGAME=YES will set all the other variables accordingly.
                   7234: 
                   7235: A package should therefor never hard code file ownership or access permissions
                   7236: but rely on INSTALL_GAME and INSTALL_GAME_DATA to set these correctly.
                   7237: 
1.4       rillig   7238: 18.6.4. Adding DESTDIR support to packages
                   7239: 
                   7240:   * All installation operations have to be prefixed with ${DESTDIR}.
                   7241: 
                   7242:   * automake gets this DESTDIR mostly right automatically. Many manual rules
                   7243:     and pre/post-install often are incorrect; fix them.
                   7244: 
                   7245:   * If files are installed with special owner/group either use @owner/@group in
                   7246:     the PLIST (preferred) or use SPECIAL_PERMS (discouraged). Note that @owner/
                   7247:     @group are sticky during install, keep this in mind.
                   7248: 
                   7249:   * In general, packages should support UNPRIVILEGED to be able to use DESTDIR.
                   7250: 
                   7251: 18.6.5. Packages with hardcoded paths to other interpreters
1.1       dsieger  7252: 
                   7253: Your package may also contain scripts with hardcoded paths to other
                   7254: interpreters besides (or as well as) perl. To correct the full pathname to the
                   7255: script interpreter, you need to set the following definitions in your Makefile
                   7256: (we shall use tclsh in this example):
                   7257: 
                   7258: REPLACE_INTERPRETER+=   tcl
                   7259: REPLACE.tcl.old=        .*/bin/tclsh
                   7260: REPLACE.tcl.new=        ${PREFIX}/bin/tclsh
                   7261: REPLACE_FILES.tcl=      # list of tcl scripts which need to be fixed,
                   7262: # relative to ${WRKSRC}, just as in REPLACE_PERL
                   7263: 
                   7264: 
                   7265: Note
                   7266: 
                   7267: Before March 2006, these variables were called _REPLACE.* and _REPLACE_FILES.*.
                   7268: 
1.4       rillig   7269: 18.6.6. Packages installing perl modules
1.1       dsieger  7270: 
                   7271: Makefiles of packages providing perl5 modules should include the Makefile
                   7272: fragment ../../lang/perl5/module.mk. It provides a do-configure target for the
                   7273: standard perl configuration for such modules as well as various hooks to tune
                   7274: this configuration. See comments in this file for details.
                   7275: 
                   7276: Perl5 modules will install into different places depending on the version of
                   7277: perl used during the build process. To address this, pkgsrc will append lines
                   7278: to the PLIST corresponding to the files listed in the installed .packlist file
                   7279: generated by most perl5 modules. This is invoked by defining PERL5_PACKLIST to
                   7280: a space-separated list of paths to packlist files, e.g.:
                   7281: 
                   7282: PERL5_PACKLIST= ${PERL5_SITEARCH}/auto/Pg/.packlist
                   7283: 
                   7284: 
                   7285: The variables PERL5_SITELIB, PERL5_SITEARCH, and PERL5_ARCHLIB represent the
                   7286: three locations in which perl5 modules may be installed, and may be used by
                   7287: perl5 packages that don't have a packlist. These three variables are also
                   7288: substituted for in the PLIST.
                   7289: 
1.4       rillig   7290: 18.6.7. Packages installing info files
1.1       dsieger  7291: 
                   7292: Some packages install info files or use the "makeinfo" or "install-info"
                   7293: commands. INFO_FILES should be defined in the package Makefile so that INSTALL
                   7294: and DEINSTALL scripts will be generated to handle registration of the info
                   7295: files in the Info directory file. The "install-info" command used for the info
                   7296: files registration is either provided by the system, or by a special purpose
                   7297: package automatically added as dependency if needed.
                   7298: 
                   7299: PKGINFODIR is the directory under ${PREFIX} where info files are primarily
                   7300: located. PKGINFODIR defaults to "info" and can be overridden by the user.
                   7301: 
                   7302: The info files for the package should be listed in the package PLIST; however
                   7303: any split info files need not be listed.
                   7304: 
                   7305: A package which needs the "makeinfo" command at build time must add "makeinfo"
                   7306: to USE_TOOLS in its Makefile. If a minimum version of the "makeinfo" command is
                   7307: needed it should be noted with the TEXINFO_REQD variable in the package
                   7308: Makefile. By default, a minimum version of 3.12 is required. If the system does
                   7309: not provide a makeinfo command or if it does not match the required minimum, a
                   7310: build dependency on the devel/gtexinfo package will be added automatically.
                   7311: 
                   7312: The build and installation process of the software provided by the package
                   7313: should not use the install-info command as the registration of info files is
                   7314: the task of the package INSTALL script, and it must use the appropriate
                   7315: makeinfo command.
                   7316: 
                   7317: To achieve this goal, the pkgsrc infrastructure creates overriding scripts for
                   7318: the install-info and makeinfo commands in a directory listed early in PATH.
                   7319: 
                   7320: The script overriding install-info has no effect except the logging of a
                   7321: message. The script overriding makeinfo logs a message and according to the
                   7322: value of TEXINFO_REQD either runs the appropriate makeinfo command or exit on
                   7323: error.
                   7324: 
1.4       rillig   7325: 18.6.8. Packages installing man pages
1.1       dsieger  7326: 
                   7327: All packages that install manual pages should install them into the same
                   7328: directory, so that there is one common place to look for them. In pkgsrc, this
                   7329: place is ${PREFIX}/${PKGMANDIR}, and this expression should be used in
                   7330: packages. The default for PKGMANDIR is "man". Another often-used value is
                   7331: "share/man".
                   7332: 
                   7333: Note
                   7334: 
                   7335: The support for a custom PKGMANDIR is far from complete.
                   7336: 
                   7337: The PLIST files can just use man/ as the top level directory for the man page
                   7338: file entries, and the pkgsrc framework will convert as needed. In all other
                   7339: places, the correct PKGMANDIR must be used.
                   7340: 
                   7341: Packages that are configured with GNU_CONFIGURE set as "yes", by default will
                   7342: use the ./configure --mandir switch to set where the man pages should be
                   7343: installed. The path is GNU_CONFIGURE_MANDIR which defaults to ${PREFIX}/$
                   7344: {PKGMANDIR}.
                   7345: 
                   7346: Packages that use GNU_CONFIGURE but do not use --mandir, can set
                   7347: CONFIGURE_HAS_MANDIR to "no". Or if the ./configure script uses a non-standard
                   7348: use of --mandir, you can set GNU_CONFIGURE_MANDIR as needed.
                   7349: 
                   7350: See Section 12.5, "Man page compression" for information on installation of
                   7351: compressed manual pages.
                   7352: 
1.4       rillig   7353: 18.6.9. Packages installing GConf2 data files
1.1       dsieger  7354: 
                   7355: If a package installs .schemas or .entries files, used by GConf2, you need to
                   7356: take some extra steps to make sure they get registered in the database:
                   7357: 
                   7358:  1. Include ../../devel/GConf2/schemas.mk instead of its buildlink3.mk file.
                   7359:     This takes care of rebuilding the GConf2 database at installation and
                   7360:     deinstallation time, and tells the package where to install GConf2 data
                   7361:     files using some standard configure arguments. It also disallows any access
                   7362:     to the database directly from the package.
                   7363: 
                   7364:  2. Ensure that the package installs its .schemas files under ${PREFIX}/share/
                   7365:     gconf/schemas. If they get installed under ${PREFIX}/etc, you will need to
                   7366:     manually patch the package.
                   7367: 
                   7368:  3. Check the PLIST and remove any entries under the etc/gconf directory, as
1.4       rillig   7369:     they will be handled automatically. See Section 8.13, "How do I change the
1.1       dsieger  7370:     location of configuration files?" for more information.
                   7371: 
                   7372:  4. Define the GCONF2_SCHEMAS variable in your Makefile with a list of all
                   7373:     .schemas files installed by the package, if any. Names must not contain any
                   7374:     directories in them.
                   7375: 
                   7376:  5. Define the GCONF2_ENTRIES variable in your Makefile with a list of all
                   7377:     .entries files installed by the package, if any. Names must not contain any
                   7378:     directories in them.
                   7379: 
1.4       rillig   7380: 18.6.10. Packages installing scrollkeeper data files
1.1       dsieger  7381: 
                   7382: If a package installs .omf files, used by scrollkeeper, you need to take some
                   7383: extra steps to make sure they get registered in the database:
                   7384: 
                   7385:  1. Include ../../textproc/scrollkeeper/omf.mk instead of its buildlink3.mk
                   7386:     file. This takes care of rebuilding the scrollkeeper database at
                   7387:     installation and deinstallation time, and disallows any access to it
                   7388:     directly from the package.
                   7389: 
                   7390:  2. Check the PLIST and remove any entries under the libdata/scrollkeeper
                   7391:     directory, as they will be handled automatically.
                   7392: 
                   7393:  3. Remove the share/omf directory from the PLIST. It will be handled by
                   7394:     scrollkeeper.
                   7395: 
1.4       rillig   7396: 18.6.11. Packages installing X11 fonts
1.1       dsieger  7397: 
                   7398: If a package installs font files, you will need to rebuild the fonts database
                   7399: in the directory where they get installed at installation and deinstallation
                   7400: time. This can be automatically done by using the pkginstall framework.
                   7401: 
                   7402: You can list the directories where fonts are installed in the FONTS_DIRS.type
                   7403: variables, where type can be one of "ttf", "type1" or "x11". Also make sure
                   7404: that the database file fonts.dir is not listed in the PLIST.
                   7405: 
                   7406: Note that you should not create new directories for fonts; instead use the
                   7407: standard ones to avoid that the user needs to manually configure his X server
                   7408: to find them.
                   7409: 
1.4       rillig   7410: 18.6.12. Packages installing GTK2 modules
1.1       dsieger  7411: 
                   7412: If a package installs GTK2 immodules or loaders, you need to take some extra
                   7413: steps to get them registered in the GTK2 database properly:
                   7414: 
                   7415:  1. Include ../../x11/gtk2/modules.mk instead of its buildlink3.mk file. This
                   7416:     takes care of rebuilding the database at installation and deinstallation
                   7417:     time.
                   7418: 
                   7419:  2. Set GTK2_IMMODULES=YES if your package installs GTK2 immodules.
                   7420: 
                   7421:  3. Set GTK2_LOADERS=YES if your package installs GTK2 loaders.
                   7422: 
                   7423:  4. Patch the package to not touch any of the GTK2 databases directly. These
                   7424:     are:
                   7425: 
                   7426:       * libdata/gtk-2.0/gdk-pixbuf.loaders
                   7427: 
                   7428:       * libdata/gtk-2.0/gtk.immodules
                   7429: 
                   7430:  5. Check the PLIST and remove any entries under the libdata/gtk-2.0 directory,
                   7431:     as they will be handled automatically.
                   7432: 
1.4       rillig   7433: 18.6.13. Packages installing SGML or XML data
1.1       dsieger  7434: 
                   7435: If a package installs SGML or XML data files that need to be registered in
                   7436: system-wide catalogs (like DTDs, sub-catalogs, etc.), you need to take some
                   7437: extra steps:
                   7438: 
                   7439:  1. Include ../../textproc/xmlcatmgr/catalogs.mk in your Makefile, which takes
                   7440:     care of registering those files in system-wide catalogs at installation and
                   7441:     deinstallation time.
                   7442: 
                   7443:  2. Set SGML_CATALOGS to the full path of any SGML catalogs installed by the
                   7444:     package.
                   7445: 
                   7446:  3. Set XML_CATALOGS to the full path of any XML catalogs installed by the
                   7447:     package.
                   7448: 
                   7449:  4. Set SGML_ENTRIES to individual entries to be added to the SGML catalog.
                   7450:     These come in groups of three strings; see xmlcatmgr(1) for more
                   7451:     information (specifically, arguments recognized by the 'add' action). Note
                   7452:     that you will normally not use this variable.
                   7453: 
                   7454:  5. Set XML_ENTRIES to individual entries to be added to the XML catalog. These
                   7455:     come in groups of three strings; see xmlcatmgr(1) for more information
                   7456:     (specifically, arguments recognized by the 'add' action). Note that you
                   7457:     will normally not use this variable.
                   7458: 
1.4       rillig   7459: 18.6.14. Packages installing extensions to the MIME database
1.1       dsieger  7460: 
                   7461: If a package provides extensions to the MIME database by installing .xml files
                   7462: inside ${PREFIX}/share/mime/packages, you need to take some extra steps to
                   7463: ensure that the database is kept consistent with respect to these new files:
                   7464: 
                   7465:  1. Include ../../databases/shared-mime-info/mimedb.mk (avoid using the
                   7466:     buildlink3.mk file from this same directory, which is reserved for
                   7467:     inclusion from other buildlink3.mk files). It takes care of rebuilding the
                   7468:     MIME database at installation and deinstallation time, and disallows any
                   7469:     access to it directly from the package.
                   7470: 
                   7471:  2. Check the PLIST and remove any entries under the share/mime directory,
                   7472:     except for files saved under share/mime/packages. The former are handled
                   7473:     automatically by the update-mime-database program, but the latter are
                   7474:     package-dependent and must be removed by the package that installed them in
                   7475:     the first place.
                   7476: 
                   7477:  3. Remove any share/mime/* directories from the PLIST. They will be handled by
                   7478:     the shared-mime-info package.
                   7479: 
1.4       rillig   7480: 18.6.15. Packages using intltool
1.1       dsieger  7481: 
                   7482: If a package uses intltool during its build, add intltool to the USE_TOOLS,
                   7483: which forces it to use the intltool package provided by pkgsrc, instead of the
                   7484: one bundled with the distribution file.
                   7485: 
                   7486: This tracks intltool's build-time dependencies and uses the latest available
                   7487: version; this way, the package benefits of any bug fixes that may have appeared
                   7488: since it was released.
                   7489: 
1.4       rillig   7490: 18.6.16. Packages installing startup scripts
1.1       dsieger  7491: 
                   7492: If a package contains a rc.d script, it won't be copied into the startup
                   7493: directory by default, but you can enable it, by adding the option
1.4       rillig   7494: PKG_RCD_SCRIPTS=YES in mk.conf. This option will copy the scripts into /etc/
                   7495: rc.d when a package is installed, and it will automatically remove the scripts
                   7496: when the package is deinstalled.
1.1       dsieger  7497: 
1.4       rillig   7498: 18.6.17. Packages installing TeX modules
1.1       dsieger  7499: 
                   7500: If a package installs TeX packages into the texmf tree, the ls-R database of
                   7501: the tree needs to be updated.
                   7502: 
                   7503: Note
                   7504: 
                   7505: Except the main TeX packages such as teTeX-texmf, packages should install files
                   7506: into PKG_LOCALTEXMFPREFIX, not PKG_TEXMFPREFIX.
                   7507: 
                   7508:  1. Include ../../print/teTeX/module.mk instead of ../../mk/tex.buildlink3.mk.
                   7509:     This takes care of rebuilding the ls-R database at installation and
                   7510:     deinstallation time.
                   7511: 
                   7512:  2. If your package installs files into a texmf tree other than the one at
                   7513:     PKG_LOCALTEXMFPREFIX, set TEXMFDIRS to the list of all texmf trees that
                   7514:     need database update.
                   7515: 
                   7516:     If your package also installs font map files that need to be registered
                   7517:     using updmap, set TEX_FONTMAPS to the list of all such font map files. Then
                   7518:     updmap will be run automatically at installation/deinstallation to enable/
                   7519:     disable font map files for TeX output drivers.
                   7520: 
                   7521:  3. Make sure that none of ls-R databases are included in PLIST, as they will
                   7522:     be removed only by the teTeX-bin package.
                   7523: 
1.4       rillig   7524: 18.6.18. Packages supporting running binaries in emulation
1.1       dsieger  7525: 
                   7526: There are some packages that provide libraries and executables for running
                   7527: binaries from a one operating system on a different one (if the latter supports
                   7528: it). One example is running Linux binaries on NetBSD.
                   7529: 
                   7530: The pkgtools/rpm2pkg helps in extracting and packaging Linux rpm packages.
                   7531: 
                   7532: The CHECK_SHLIBS can be set to no to avoid the check-shlibs target, which tests
                   7533: if all libraries for each installed executable can be found by the dynamic
                   7534: linker. Since the standard dynamic linker is run, this fails for emulation
                   7535: packages, because the libraries used by the emulation are not in the standard
                   7536: directories.
                   7537: 
1.4       rillig   7538: 18.6.19. Packages installing hicolor theme icons
1.1       dsieger  7539: 
                   7540: If a package installs images under the share/icons/hicolor and/or updates the
                   7541: share/icons/hicolor/icon-theme.cache database, you need to take some extra
                   7542: steps to make sure that the shared theme directory is handled appropriately and
                   7543: that the cache database is rebuilt:
                   7544: 
                   7545:  1. Include ../../graphics/hicolor-icon-theme/buildlink3.mk.
                   7546: 
                   7547:  2. Check the PLIST and remove the entry that refers to the theme cache.
                   7548: 
                   7549:  3. Ensure that the PLIST does not remove the shared icon directories from the
                   7550:     share/icons/hicolor hierarchy because they will be handled automatically.
                   7551: 
                   7552: The best way to verify that the PLIST is correct with respect to the last two
                   7553: points is to regenerate it using make print-PLIST.
                   7554: 
1.4       rillig   7555: 18.6.20. Packages installing desktop files
1.1       dsieger  7556: 
                   7557: If a package installs .desktop files under share/applications and these include
                   7558: MIME information, you need to take extra steps to ensure that they are
                   7559: registered into the MIME database:
                   7560: 
                   7561:  1. Include ../../sysutils/desktop-file-utils/desktopdb.mk.
                   7562: 
                   7563:  2. Check the PLIST and remove the entry that refers to the share/applications/
                   7564:     mimeinfo.cache file. It will be handled automatically.
                   7565: 
                   7566: The best way to verify that the PLIST is correct with respect to the last point
                   7567: is to regenerate it using make print-PLIST.
                   7568: 
                   7569: 18.7. Marking packages as having problems
                   7570: 
                   7571: In some cases one does not have the time to solve a problem immediately. There
                   7572: are currently two ways to declare that one knows that a package has problems.
                   7573: 
                   7574:   * The first way is to plainly mark it as broken. For this, one just sets the
                   7575:     variable BROKEN to the reason why the package is broken (similar to the
                   7576:     RESTRICTED variable). A user trying to build the package will immediately
                   7577:     be shown this message, and the build will not be even tried.
                   7578: 
                   7579:   * After each pkgsrc freeze period (a time when the tree is stabilized and a
                   7580:     new pkgsrc branch is cut), the packages that were not building in the
                   7581:     official branch build on the latest NetBSD release will be marked as broken
                   7582:     on that branch. This is done by setting the BROKEN_IN variable to the
                   7583:     branch name (or appending the branch name to it). If a user tries to build
                   7584:     such a package and the build fails, the user gets a message that says that
                   7585:     the package was broken on the respective branch(es).
                   7586: 
                   7587: Both types of packages are removed from pkgsrc in irregular intervals.
                   7588: 
                   7589: Chapter 19. Debugging
                   7590: 
                   7591: To check out all the gotchas when building a package, here are the steps that I
                   7592: do in order to get a package working. Please note this is basically the same as
                   7593: what was explained in the previous sections, only with some debugging aids.
                   7594: 
1.4       rillig   7595:   * Be sure to set PKG_DEVELOPER=yes in mk.conf.
1.1       dsieger  7596: 
                   7597:   * Install pkgtools/url2pkg, create a directory for a new package, change into
                   7598:     it, then run url2pkg:
                   7599: 
                   7600:     % mkdir /usr/pkgsrc/category/examplepkg
                   7601:     % cd /usr/pkgsrc/category/examplepkg
                   7602:     % url2pkg http://www.example.com/path/to/distfile.tar.gz
                   7603: 
                   7604:   * Edit the Makefile as requested.
                   7605: 
                   7606:   * Fill in the DESCR file
                   7607: 
                   7608:   * Run make configure
                   7609: 
                   7610:   * Add any dependencies glimpsed from documentation and the configure step to
                   7611:     the package's Makefile.
                   7612: 
                   7613:   * Make the package compile, doing multiple rounds of
                   7614: 
                   7615:     % make
                   7616:     % pkgvi ${WRKSRC}/some/file/that/does/not/compile
                   7617:     % mkpatches
                   7618:     % patchdiff
                   7619:     % mv ${WRKDIR}/.newpatches/* patches
                   7620:     % make mps
                   7621:     % make clean
                   7622: 
                   7623:     Doing this step as non-root user will ensure that no files are modified
                   7624:     that shouldn't be, especially during the build phase. mkpatches, patchdiff
                   7625:     and pkgvi are from the pkgtools/pkgdiff package.
                   7626: 
                   7627:   * Look at the Makefile, fix if necessary; see Section 10.1, "Makefile".
                   7628: 
                   7629:   * Generate a PLIST:
                   7630: 
                   7631:     # make install
                   7632:     # make print-PLIST >PLIST
                   7633:     # make deinstall
                   7634:     # make install
                   7635:     # make deinstall
                   7636: 
                   7637:     You usually need to be root to do this. Look if there are any files left:
                   7638: 
                   7639:     # make print-PLIST
                   7640: 
                   7641:     If this reveals any files that are missing in PLIST, add them.
                   7642: 
                   7643:   * Now that the PLIST is OK, install the package again and make a binary
                   7644:     package:
                   7645: 
                   7646:     # make reinstall
                   7647:     # make package
                   7648: 
                   7649:   * Delete the installed package:
                   7650: 
                   7651:     # pkg_delete examplepkg
                   7652: 
                   7653:   * Repeat the above make print-PLIST command, which shouldn't find anything
                   7654:     now:
                   7655: 
                   7656:     # make print-PLIST
                   7657: 
                   7658:   * Reinstall the binary package:
                   7659: 
                   7660:     # pkg_add .../examplepkg.tgz
                   7661: 
                   7662:   * Play with it. Make sure everything works.
                   7663: 
                   7664:   * Run pkglint from pkgtools/pkglint, and fix the problems it reports:
                   7665: 
                   7666:     # pkglint
                   7667: 
                   7668:   * Submit (or commit, if you have cvs access); see Chapter 20, Submitting and
                   7669:     Committing.
                   7670: 
                   7671: Chapter 20. Submitting and Committing
                   7672: 
                   7673: Table of Contents
                   7674: 
                   7675: 20.1. Submitting binary packages
                   7676: 20.2. Submitting source packages (for non-NetBSD-developers)
                   7677: 20.3. General notes when adding, updating, or removing packages
                   7678: 20.4. Committing: Importing a package into CVS
                   7679: 20.5. Updating a package to a newer version
                   7680: 20.6. Moving a package in pkgsrc
                   7681: 
                   7682: 20.1. Submitting binary packages
                   7683: 
                   7684: Our policy is that we accept binaries only from pkgsrc developers to guarantee
                   7685: that the packages don't contain any trojan horses etc. This is not to annoy
                   7686: anyone but rather to protect our users! You're still free to put up your
                   7687: home-made binary packages and tell the world where to get them. NetBSD
                   7688: developers doing bulk builds and wanting to upload them please see
                   7689: Section 6.3.8, "Uploading results of a bulk build".
                   7690: 
                   7691: 20.2. Submitting source packages (for non-NetBSD-developers)
                   7692: 
                   7693: First, check that your package is complete, compiles and runs well; see
                   7694: Chapter 19, Debugging and the rest of this document. Next, generate an
                   7695: uuencoded gzipped tar(1) archive that contains all files that make up the
                   7696: package. Finally, send this package to the pkgsrc bug tracking system, either
                   7697: with the send-pr(1) command, or if you don't have that, go to the web page
1.4       rillig   7698: http://www.NetBSD.org/support/send-pr.html, which contains some instructions
                   7699: and a link to a form, where you can submit packages.
1.1       dsieger  7700: 
                   7701: In the form of the problem report, the category should be "pkg", the synopsis
                   7702: should include the package name and version number, and the description field
                   7703: should contain a short description of your package (contents of the COMMENT
                   7704: variable or DESCR file are OK). The uuencoded package data should go into the
                   7705: "fix" field.
                   7706: 
                   7707: If you want to submit several packages, please send a separate PR for each one,
                   7708: it's easier for us to track things that way.
                   7709: 
                   7710: Alternatively, you can also import new packages into pkgsrc-wip ("pkgsrc
                   7711: work-in-progress"); see the homepage at http://pkgsrc-wip.sourceforge.net/ for
                   7712: details.
                   7713: 
                   7714: 20.3. General notes when adding, updating, or removing packages
                   7715: 
                   7716: Please note all package additions, updates, moves, and removals in pkgsrc/doc/
                   7717: CHANGES-YYYY. It's very important to keep this file up to date and conforming
                   7718: to the existing format, because it will be used by scripts to automatically
                   7719: update pages on www.NetBSD.org and other sites. Additionally, check the pkgsrc/
                   7720: doc/TODO file and remove the entry for the package you updated or removed, in
                   7721: case it was mentioned there.
                   7722: 
                   7723: When the PKGREVISION of a package is bumped, the change should appear in pkgsrc
                   7724: /doc/CHANGES-YYYY if it is security related or otherwise relevant. Mass bumps
                   7725: that result from a dependency being updated should not be mentioned. In all
                   7726: other cases it's the developer's decision.
                   7727: 
                   7728: There is a make target that helps in creating proper CHANGES-YYYY entries: make
                   7729: changes-entry. It uses the optional CTYPE and NETBSD_LOGIN_NAME variables. The
                   7730: general usage is to first make sure that your CHANGES-YYYY file is up-to-date
                   7731: (to avoid having to resolve conflicts later-on) and then to cd to the package
                   7732: directory. For package updates, make changes-entry is enough. For new packages,
                   7733: or package moves or removals, set the CTYPE variable on the command line to
1.4       rillig   7734: "Added", "Moved", or "Removed". You can set NETBSD_LOGIN_NAME in mk.conf if
                   7735: your local login name is not the same as your NetBSD login name. Don't forget
                   7736: to commit the changes to pkgsrc/doc/CHANGES-YYYY!
1.1       dsieger  7737: 
                   7738: 20.4. Committing: Importing a package into CVS
                   7739: 
                   7740: This section is only of interest for pkgsrc developers with write access to the
                   7741: pkgsrc repository. Please remember that cvs imports files relative to the
                   7742: current working directory, and that the pathname that you give the cvs import
                   7743: command is so that it knows where to place the files in the repository. Newly
                   7744: created packages should be imported with a vendor tag of "TNF" and a release
                   7745: tag of "pkgsrc-base", e.g:
                   7746: 
                   7747: $ cd .../pkgsrc/category/pkgname
                   7748: $ cvs import pkgsrc/category/pkgname TNF pkgsrc-base
                   7749: 
                   7750: Remember to move the directory from which you imported out of the way, or cvs
                   7751: will complain the next time you "cvs update" your source tree. Also don't
                   7752: forget to add the new package to the category's Makefile.
                   7753: 
                   7754: The commit message of the initial import should include part of the DESCR file,
                   7755: so people reading the mailing lists know what the package is/does.
                   7756: 
                   7757: For new packages, "cvs import" is preferred to "cvs add" because the former
                   7758: gets everything with a single command, and provides a consistent tag.
                   7759: 
                   7760: 20.5. Updating a package to a newer version
                   7761: 
                   7762: Please always put a concise, appropriate and relevant summary of the changes
                   7763: between old and new versions into the commit log when updating a package. There
                   7764: are various reasons for this:
                   7765: 
                   7766:   * A URL is volatile, and can change over time. It may go away completely or
                   7767:     its information may be overwritten by newer information.
                   7768: 
                   7769:   * Having the change information between old and new versions in our CVS
                   7770:     repository is very useful for people who use either cvs or anoncvs.
                   7771: 
                   7772:   * Having the change information between old and new versions in our CVS
                   7773:     repository is very useful for people who read the pkgsrc-changes mailing
                   7774:     list, so that they can make tactical decisions about when to upgrade the
                   7775:     package.
                   7776: 
                   7777: Please also recognize that, just because a new version of a package has been
                   7778: released, it should not automatically be upgraded in the CVS repository. We
                   7779: prefer to be conservative in the packages that are included in pkgsrc -
                   7780: development or beta packages are not really the best thing for most places in
                   7781: which pkgsrc is used. Please use your judgement about what should go into
                   7782: pkgsrc, and bear in mind that stability is to be preferred above new and
                   7783: possibly untested features.
                   7784: 
                   7785: 20.6. Moving a package in pkgsrc
                   7786: 
                   7787:  1. Make a copy of the directory somewhere else.
                   7788: 
                   7789:  2. Remove all CVS dirs.
                   7790: 
                   7791:     Alternatively to the first two steps you can also do:
                   7792: 
                   7793:     % cvs -d user@cvs.NetBSD.org:/cvsroot export -D today pkgsrc/category/package
                   7794: 
                   7795:     and use that for further work.
                   7796: 
                   7797:  3. Fix CATEGORIES and any DEPENDS paths that just did "../package" instead of
                   7798:     "../../category/package".
                   7799: 
                   7800:  4. cvs import the modified package in the new place.
                   7801: 
                   7802:  5. Check if any package depends on it:
                   7803: 
                   7804:     % cd /usr/pkgsrc
                   7805:     % grep /package */*/Makefile* */*/buildlink*
                   7806: 
                   7807:  6. Fix paths in packages from step 5 to point to new location.
                   7808: 
                   7809:  7. cvs rm (-f) the package at the old location.
                   7810: 
                   7811:  8. Remove from oldcategory/Makefile.
                   7812: 
                   7813:  9. Add to newcategory/Makefile.
                   7814: 
                   7815: 10. Commit the changed and removed files:
                   7816: 
                   7817:     % cvs commit oldcategory/package oldcategory/Makefile newcategory/Makefile
                   7818: 
                   7819:     (and any packages from step 5, of course).
                   7820: 
                   7821: Chapter 21. Frequently Asked Questions
                   7822: 
                   7823: This section contains the answers to questions that may arise when you are
                   7824: writing a package. If you don't find your question answered here, first have a
                   7825: look in the other chapters, and if you still don't have the answer, ask on the
                   7826: pkgsrc-users mailing list.
                   7827: 
                   7828: 21.1. What is the difference between MAKEFLAGS, .MAKEFLAGS and MAKE_FLAGS?
                   7829: 21.2. What is the difference between MAKE, GMAKE and MAKE_PROGRAM?
                   7830: 21.3. What is the difference between CC, PKG_CC and PKGSRC_COMPILER?
                   7831: 21.4. What is the difference between BUILDLINK_LDFLAGS, BUILDLINK_LDADD and
                   7832:     BUILDLINK_LIBS?
                   7833: 21.5. Why does make show-var VARNAME=BUILDLINK_PREFIX.foo say it's empty?
                   7834: 21.6. What does ${MASTER_SITE_SOURCEFORGE:=package/} mean? I don't understand
                   7835:     the := inside it.
                   7836: 21.7. Which mailing lists are there for package developers?
                   7837: 21.8. Where is the pkgsrc documentation?
                   7838: 21.9. I have a little time to kill. What shall I do?
                   7839: 
                   7840: 21.1. What is the difference between MAKEFLAGS, .MAKEFLAGS and MAKE_FLAGS?
                   7841: 
                   7842:       MAKEFLAGS are the flags passed to the pkgsrc-internal invocations of make
                   7843:       (1), while MAKE_FLAGS are the flags that are passed to the MAKE_PROGRAM
                   7844:       when building the package. [FIXME: What is .MAKEFLAGS for?]
                   7845: 
                   7846: 21.2. What is the difference between MAKE, GMAKE and MAKE_PROGRAM?
                   7847: 
                   7848:       MAKE is the path to the make(1) program that is used in the pkgsrc
                   7849:       infrastructure. GMAKE is the path to GNU Make, but you need to say
                   7850:       USE_TOOLS+=gmake to use that. MAKE_PROGRAM is the path to the Make
                   7851:       program that is used for building the package.
                   7852: 
                   7853: 21.3. What is the difference between CC, PKG_CC and PKGSRC_COMPILER?
                   7854: 
                   7855:       CC is the path to the real C compiler, which can be configured by the
                   7856:       pkgsrc user. PKG_CC is the path to the compiler wrapper. PKGSRC_COMPILER
                   7857:       is not a path to a compiler, but the type of compiler that should be
                   7858:       used. See mk/compiler.mk for more information about the latter variable.
                   7859: 
                   7860: 21.4. What is the difference between BUILDLINK_LDFLAGS, BUILDLINK_LDADD and
                   7861:       BUILDLINK_LIBS?
                   7862: 
                   7863:       [FIXME]
                   7864: 
                   7865: 21.5. Why does make show-var VARNAME=BUILDLINK_PREFIX.foo say it's empty?
                   7866: 
                   7867:       For optimization reasons, some variables are only available in the
                   7868:       "wrapper" phase and later. To "simulate" the wrapper phase, append
                   7869:       PKG_PHASE=wrapper to the above command.
                   7870: 
                   7871: 21.6. What does ${MASTER_SITE_SOURCEFORGE:=package/} mean? I don't understand
                   7872:       the := inside it.
                   7873: 
                   7874:       The := is not really an assignment operator, like you might expect at
                   7875:       first sight. Instead, it is a degenerate form of ${LIST:old_string=
                   7876:       new_string}, which is documented in the make(1) man page and which you
                   7877:       may have seen as in ${SRCS:.c=.o}. In the case of MASTER_SITE_*,
                   7878:       old_string is the empty string and new_string is package/. That's where
                   7879:       the : and the = fall together.
                   7880: 
                   7881: 21.7. Which mailing lists are there for package developers?
                   7882: 
                   7883:       tech-pkg
                   7884: 
                   7885:           This is a list for technical discussions related to pkgsrc
                   7886:           development, e.g. soliciting feedback for changes to pkgsrc
                   7887:           infrastructure, proposed new features, questions related to porting
                   7888:           pkgsrc to a new platform, advice for maintaining a package, patches
                   7889:           that affect many packages, help requests moved from pkgsrc-users when
                   7890:           an infrastructure bug is found, etc.
                   7891: 
                   7892:       pkgsrc-bugs
                   7893: 
                   7894:           All bug reports in category "pkg" sent with send-pr(1) appear here.
                   7895:           Please do not report your bugs here directly; use one of the other
                   7896:           mailing lists.
                   7897: 
                   7898: 21.8. Where is the pkgsrc documentation?
                   7899: 
                   7900:       There are many places where you can find documentation about pkgsrc:
                   7901: 
                   7902:         * The pkgsrc guide (this document) is a collection of chapters that
                   7903:           explain large parts of pkgsrc, but some chapters tend to be outdated.
                   7904:           Which ones they are is hard to say.
                   7905: 
                   7906:         * On the mailing list archives (see http://mail-index.NetBSD.org/), you
                   7907:           can find discussions about certain features, announcements of new
                   7908:           parts of the pkgsrc infrastructure and sometimes even announcements
                   7909:           that a certain feature has been marked as obsolete. The benefit here
                   7910:           is that each message has a date appended to it.
                   7911: 
                   7912:         * Many of the files in the mk/ directory start with a comment that
                   7913:           describes the purpose of the file and how it can be used by the
                   7914:           pkgsrc user and package authors. An easy way to find this
                   7915:           documentation is to run bmake help.
                   7916: 
                   7917:         * The CVS log messages are a rich source of information, but they tend
                   7918:           to be highly abbreviated, especially for actions that occur often.
                   7919:           Some contain a detailed description of what has changed, but they are
                   7920:           geared towards the other pkgsrc developers, not towards an average
                   7921:           pkgsrc user. They also only document changes, so if you don't know
                   7922:           what has been before, these messages may not be worth too much to
                   7923:           you.
                   7924: 
                   7925:         * Some parts of pkgsrc are only "implicitly documented", that is the
                   7926:           documentation exists only in the mind of the developer who wrote the
                   7927:           code. To get this information, use the cvs annotate command to see
                   7928:           who has written it and ask on the tech-pkg mailing list, so that
                   7929:           others can find your questions later (see above). To be sure that the
                   7930:           developer in charge reads the mail, you may CC him or her.
                   7931: 
                   7932: 21.9. I have a little time to kill. What shall I do?
                   7933: 
                   7934:       This is not really an FAQ yet, but here's the answer anyway.
                   7935: 
                   7936:         * Run pkg_chk -N (from the pkgtools/pkg_chk package). It will tell you
                   7937:           about newer versions of installed packages that are available, but
                   7938:           not yet updated in pkgsrc.
                   7939: 
                   7940:         * Browse pkgsrc/doc/TODO ? it contains a list of suggested new packages
                   7941:           and a list of cleanups and enhancements for pkgsrc that would be nice
                   7942:           to have.
                   7943: 
                   7944:         * Review packages for which review was requested on the pkgsrc-wip
                   7945:           review mailing list.
                   7946: 
                   7947: Chapter 22. GNOME packaging and porting
                   7948: 
                   7949: Table of Contents
                   7950: 
                   7951: 22.1. Meta packages
                   7952: 22.2. Packaging a GNOME application
                   7953: 22.3. Updating GNOME to a newer version
                   7954: 22.4. Patching guidelines
                   7955: 
                   7956: Quoting GNOME's web site:
                   7957: 
                   7958:     The GNOME project provides two things: The GNOME desktop environment, an
                   7959:     intuitive and attractive desktop for users, and the GNOME development
                   7960:     platform, an extensive framework for building applications that integrate
                   7961:     into the rest of the desktop.
                   7962: 
                   7963: pkgsrc provides a seamless way to automatically build and install a complete
                   7964: GNOME environment under many different platforms. We can say with confidence
                   7965: that pkgsrc is one of the most advanced build and packaging systems for GNOME
                   7966: due to its included technologies buildlink3, the wrappers and tools framework
                   7967: and automatic configuration file management. Lots of efforts are put into
                   7968: achieving a completely clean deinstallation of installed software components.
                   7969: 
                   7970: Given that pkgsrc is NetBSD's official packaging system, the above also means
                   7971: that great efforts are put into making GNOME work under this operating system.
                   7972: Recently, DragonFly BSD also adopted pkgsrc as its preferred packaging system,
                   7973: contributing lots of portability fixes to make GNOME build and install under
                   7974: it.
                   7975: 
                   7976: This chapter is aimed at pkgsrc developers and other people interested in
                   7977: helping our GNOME porting and packaging efforts. It provides instructions on
                   7978: how to manage the existing packages and some important information regarding
                   7979: their internals.
                   7980: 
                   7981: We need your help!
                   7982: 
                   7983: Should you have some spare cycles to devote to NetBSD, pkgsrc and GNOME and are
                   7984: willing to learn new exciting stuff, please jump straight to the pending work
                   7985: list! There is still a long way to go to get a fully-functional GNOME desktop
                   7986: under NetBSD and we need your help to achieve it!
                   7987: 
                   7988: 22.1. Meta packages
                   7989: 
                   7990: pkgsrc includes three GNOME-related meta packages:
                   7991: 
                   7992:   * meta-pkgs/gnome-base: Provides the core GNOME desktop environment. It only
                   7993:     includes the necessary bits to get it to boot correctly, although it may
                   7994:     lack important functionality for daily operation. The idea behind this
                   7995:     package is to let end users build their own configurations on top of this
                   7996:     one, first installing this meta package to achieve a functional setup and
                   7997:     then adding individual applications.
                   7998: 
                   7999:   * meta-pkgs/gnome: Provides a complete installation of the GNOME platform and
                   8000:     desktop as defined by the GNOME project; this is based on the components
                   8001:     distributed in the platform/x.y/x.y.z/sources and desktop/x.y/x.y.z/sources
                   8002:     directories of the official FTP server. Developer-only tools found in those
                   8003:     directories are not installed unless required by some other component to
                   8004:     work properly. Similarly, packages from the bindings set (bindings/x.y/
                   8005:     x.y.z/sources) are not pulled in unless required as a dependency for an
                   8006:     end-user component. This package "extends" meta-pkgs/gnome-base.
                   8007: 
                   8008:   * meta-pkgs/gnome-devel: Installs all the tools required to build a GNOME
                   8009:     component when fetched from the CVS repository. These are required to let
                   8010:     the autogen.sh scripts work appropriately.
                   8011: 
                   8012: In all these packages, the DEPENDS lines are sorted in a way that eases
                   8013: updates: a package may depend on other packages listed before it but not on any
                   8014: listed after it. It is very important to keep this order to ease updates so...
                   8015: do not change it to alphabetical sorting!
                   8016: 
                   8017: 22.2. Packaging a GNOME application
                   8018: 
                   8019: Almost all GNOME applications are written in C and use a common set of tools as
                   8020: their build system. Things get different with the new bindings to other
                   8021: languages (such as Python), but the following will give you a general idea on
                   8022: the minimum required tools:
                   8023: 
                   8024:   * Almost all GNOME applications use the GNU Autotools as their build system.
                   8025:     As a general rule you will need to tell this to your package:
                   8026: 
                   8027:     GNU_CONFIGURE=yes
                   8028:     USE_LIBTOOL=yes
                   8029:     USE_TOOLS+=gmake
                   8030: 
                   8031:   * If the package uses pkg-config to detect dependencies, add this tool to the
                   8032:     list of required utilities:
                   8033: 
                   8034:     USE_TOOLS+=pkg-config
                   8035: 
                   8036:     Also use pkgtools/verifypc at the end of the build process to ensure that
                   8037:     you did not miss to specify any dependency in your package and that the
                   8038:     version requirements are all correct.
                   8039: 
                   8040:   * If the package uses intltool, be sure to add intltool to the USE_TOOLS to
                   8041:     handle dependencies and to force the package to use the latest available
                   8042:     version.
                   8043: 
                   8044:   * If the package uses gtk-doc (a documentation generation utility), do not
                   8045:     add a dependency on it. The tool is rather big and the distfile should come
                   8046:     with pregenerated documentation anyway; if it does not, it is a bug that
                   8047:     you ought to report. For such packages you should disable gtk-doc (unless
                   8048:     it is the default):
                   8049: 
                   8050:     CONFIGURE_ARGS+=--disable-gtk-doc
                   8051: 
                   8052:     The default location of installed HTML files (share/gtk-doc/<package-name>)
                   8053:     is correct and should not be changed unless the package insists on
                   8054:     installing them somewhere else. Otherwise programs as devhelp will not be
                   8055:     able to open them. You can do that with an entry similar to:
                   8056: 
                   8057:     CONFIGURE_ARGS+=--with-html-dir=${PREFIX}/share/gtk-doc/...
                   8058: 
                   8059: GNOME uses multiple shared directories and files under the installation prefix
                   8060: to maintain databases. In this context, shared means that those exact same
                   8061: directories and files are used among several different packages, leading to
                   8062: conflicts in the PLIST. pkgsrc currently includes functionality to handle the
                   8063: most common cases, so you have to forget about using @unexec ${RMDIR} lines in
                   8064: your file lists and omitting shared files from them. If you find yourself doing
                   8065: those, your package is most likely incorrect.
                   8066: 
                   8067: The following table lists the common situations that result in using shared
                   8068: directories or files. For each of them, the appropriate solution is given.
                   8069: After applying the solution be sure to regenerate the package's file list with
                   8070: make print-PLIST and ensure it is correct.
                   8071: 
                   8072: Table 22.1. PLIST handling for GNOME packages
                   8073: 
                   8074: +-----------------------------------------------------------------------------+
                   8075: |             If the package...             |             Then...             |
                   8076: |-------------------------------------------+---------------------------------|
1.4       rillig   8077: |                                           |See Section 18.6.10, "Packages   |
1.1       dsieger  8078: |Installs OMF files under share/omf.        |installing scrollkeeper data     |
                   8079: |                                           |files".                          |
                   8080: |-------------------------------------------+---------------------------------|
1.4       rillig   8081: |Installs icons under the share/icons/      |See Section 18.6.19, "Packages   |
1.1       dsieger  8082: |hicolor hierarchy or updates share/icons/  |installing hicolor theme icons". |
                   8083: |hicolor/icon-theme.cache.                  |                                 |
                   8084: |-------------------------------------------+---------------------------------|
1.4       rillig   8085: |                                           |See Section 18.6.14, "Packages   |
1.1       dsieger  8086: |Installs files under share/mime/packages.  |installing extensions to the MIME|
                   8087: |                                           |database".                       |
                   8088: |-------------------------------------------+---------------------------------|
1.4       rillig   8089: |Installs .desktop files under share/       |See Section 18.6.20, "Packages   |
1.1       dsieger  8090: |applications and these include MIME        |installing desktop files".       |
                   8091: |information.                               |                                 |
                   8092: +-----------------------------------------------------------------------------+
                   8093: 
                   8094: 
                   8095: 22.3. Updating GNOME to a newer version
                   8096: 
                   8097: When seeing GNOME as a whole, there are two kinds of updates:
                   8098: 
                   8099: Major update
                   8100: 
                   8101:     Given that there is still a very long way for GNOME 3 (if it ever appears),
                   8102:     we consider a major update one that goes from a 2.X version to a 2.Y one,
                   8103:     where Y is even and greater than X. These are hard to achieve because they
                   8104:     introduce lots of changes in the components' code and almost all GNOME
                   8105:     distfiles are updated to newer versions. Some of them can even break API
                   8106:     and ABI compatibility with the previous major version series. As a result,
                   8107:     the update needs to be done all at once to minimize breakage.
                   8108: 
                   8109:     A major update typically consists of around 80 package updates and the
                   8110:     addition of some new ones.
                   8111: 
                   8112: Minor update
                   8113: 
                   8114:     We consider a minor update one that goes from a 2.A.X version to a 2.A.Y
                   8115:     one where Y is greater than X. These are easy to achieve because they do
                   8116:     not update all GNOME components, can be done in an incremental way and do
                   8117:     not break API nor ABI compatibility.
                   8118: 
                   8119:     A minor update typically consists of around 50 package updates, although
                   8120:     the numbers here may vary a lot.
                   8121: 
                   8122: In order to update the GNOME components in pkgsrc to a new stable release
                   8123: (either major or minor), the following steps should be followed:
                   8124: 
                   8125:  1. Get a list of all the tarballs that form the new release by using the
                   8126:     following commands. These will leave the full list of the components's
                   8127:     distfiles into the list.txt file:
                   8128: 
                   8129:     % echo ls "*.tar.bz2" | \
                   8130:         ftp -V ftp://ftp.gnome.org/pub/gnome/platform/x.y/x.y.z/sources/ | \
                   8131:         awk '{ print $9 }' >list.txt
                   8132:     % echo ls "*.tar.bz2" | \
                   8133:         ftp -V ftp://ftp.gnome.org/pub/gnome/desktop/x.y/x.y.z/sources/ | \
                   8134:         awk '{ print $9 }' >>list.txt
                   8135: 
                   8136:  2. Open each meta package's Makefile and bump their version to the release you
                   8137:     are updating them to. The three meta packages should be always consistent
                   8138:     with versioning. Obviously remove any PKGREVISIONs that might be in them.
                   8139: 
                   8140:  3. For each meta package, update all its DEPENDS lines to match the latest
                   8141:     versions as shown by the above commands. Do not list any newer version
                   8142:     (even if found in the FTP) because the meta packages are supposed to list
                   8143:     the exact versions that form a specific GNOME release. Exceptions are
                   8144:     permitted here if a newer version solves a serious issue in the overall
                   8145:     desktop experience; these typically come in the form of a revision bump in
                   8146:     pkgsrc, not in newer versions from the developers.
                   8147: 
                   8148:     Packages not listed in the list.txt file should be updated to the latest
                   8149:     version available (if found in pkgsrc). This is the case, for example, of
                   8150:     the dependencies on the GNU Autotools in the meta-pkgs/gnome-devel meta
                   8151:     package.
                   8152: 
                   8153:  4. Generate a patch from the modified meta packages and extract the list of
                   8154:     "new" lines. This will provide you an outline on what packages need to be
                   8155:     updated in pkgsrc and in what order:
                   8156: 
                   8157:     % cvs diff -u gnome-devel gnome-base gnome | grep '^+D' >todo.txt
                   8158: 
                   8159:  5. For major desktop updates it is recommended to zap all your installed
                   8160:     packages and start over from scratch at this point.
                   8161: 
                   8162:  6. Now comes the longest step by far: iterate over the contents of todo.txt
                   8163:     and update the packages listed in it in order. For major desktop updates
                   8164:     none of these should be committed until the entire set is completed because
                   8165:     there are chances of breaking not-yet-updated packages.
                   8166: 
                   8167:  7. Once the packages are up to date and working, commit them to the tree one
                   8168:     by one with appropriate log messages. At the end, commit the three meta
                   8169:     package updates and all the corresponding changes to the doc/CHANGES-<YEAR>
                   8170:     and pkgsrc/doc/TODO files.
                   8171: 
                   8172: 22.4. Patching guidelines
                   8173: 
                   8174: GNOME is a very big component in pkgsrc which approaches 100 packages. Please,
                   8175: it is very important that you always, always, always feed back any portability
                   8176: fixes you do to a GNOME package to the mainstream developers (see
                   8177: Section 10.3.5, "Feedback to the author"). This is the only way to get their
                   8178: attention on portability issues and to ensure that future versions can be built
                   8179: out-of-the box on NetBSD. The less custom patches in pkgsrc, the easier further
                   8180: updates are. Those developers in charge of issuing major GNOME updates will be
                   8181: grateful if you do that.
                   8182: 
                   8183: The most common places to report bugs are the GNOME's Bugzilla and the
                   8184: freedesktop.org's Bugzilla. Not all components use these to track bugs, but
                   8185: most of them do. Do not be short on your reports: always provide detailed
                   8186: explanations of the current failure, how it can be improved to achieve maximum
                   8187: portability and, if at all possible, provide a patch against CVS head. The more
                   8188: verbose you are, the higher chances of your patch being accepted.
                   8189: 
                   8190: Also, please avoid using preprocessor magic to fix portability issues. While
                   8191: the FreeBSD GNOME people are doing a great job in porting GNOME to their
                   8192: operating system, the official GNOME sources are now plagued by conditionals
                   8193: that check for __FreeBSD__ and similar macros. This hurts portability. Please
                   8194: see our patching guidelines (Section 10.3.4, "Patching guidelines") for more
                   8195: details.
                   8196: 
                   8197: Part III. The pkgsrc infrastructure internals
                   8198: 
                   8199: This part of the guide deals with everything from the infrastructure that is
                   8200: behind the interfaces described in the developer's guide. A casual package
                   8201: maintainer should not need anything from this part.
                   8202: 
                   8203: Table of Contents
                   8204: 
                   8205: 23. Design of the pkgsrc infrastructure
                   8206: 
                   8207:     23.1. The meaning of variable definitions
                   8208:     23.2. Avoiding problems before they arise
                   8209:     23.3. Variable evaluation
                   8210: 
                   8211:         23.3.1. At load time
                   8212:         23.3.2. At runtime
                   8213: 
                   8214:     23.4. How can variables be specified?
                   8215:     23.5. Designing interfaces for Makefile fragments
                   8216: 
                   8217:         23.5.1. Procedures with parameters
                   8218:         23.5.2. Actions taken on behalf of parameters
                   8219: 
                   8220:     23.6. The order in which files are loaded
                   8221: 
                   8222:         23.6.1. The order in bsd.prefs.mk
                   8223:         23.6.2. The order in bsd.pkg.mk
                   8224: 
                   8225: 24. Regression tests
                   8226: 
                   8227:     24.1. The regression tests framework
                   8228:     24.2. Running the regression tests
                   8229:     24.3. Adding a new regression test
                   8230: 
                   8231:         24.3.1. Overridable functions
                   8232:         24.3.2. Helper functions
                   8233: 
                   8234: 25. Porting pkgsrc
                   8235: 
                   8236:     25.1. Porting pkgsrc to a new operating system
                   8237:     25.2. Adding support for a new compiler
                   8238: 
                   8239: Chapter 23. Design of the pkgsrc infrastructure
                   8240: 
                   8241: Table of Contents
                   8242: 
                   8243: 23.1. The meaning of variable definitions
                   8244: 23.2. Avoiding problems before they arise
                   8245: 23.3. Variable evaluation
                   8246: 
                   8247:     23.3.1. At load time
                   8248:     23.3.2. At runtime
                   8249: 
                   8250: 23.4. How can variables be specified?
                   8251: 23.5. Designing interfaces for Makefile fragments
                   8252: 
                   8253:     23.5.1. Procedures with parameters
                   8254:     23.5.2. Actions taken on behalf of parameters
                   8255: 
                   8256: 23.6. The order in which files are loaded
                   8257: 
                   8258:     23.6.1. The order in bsd.prefs.mk
                   8259:     23.6.2. The order in bsd.pkg.mk
                   8260: 
                   8261: The pkgsrc infrastructure consists of many small Makefile fragments. Each such
                   8262: fragment needs a properly specified interface. This chapter explains how such
                   8263: an interface looks like.
                   8264: 
                   8265: 23.1. The meaning of variable definitions
                   8266: 
                   8267: Whenever a variable is defined in the pkgsrc infrastructure, the location and
                   8268: the way of definition provide much information about the intended use of that
                   8269: variable. Additionally, more documentation may be found in a header comment or
                   8270: in this pkgsrc guide.
                   8271: 
                   8272: A special file is mk/defaults/mk.conf, which lists all variables that are
                   8273: intended to be user-defined. They are either defined using the ?= operator or
                   8274: they are left undefined because defining them to anything would effectively
                   8275: mean "yes". All these variables may be overridden by the pkgsrc user in the
                   8276: MAKECONF file.
                   8277: 
                   8278: Outside this file, the following conventions apply: Variables that are defined
                   8279: using the ?= operator may be overridden by a package.
                   8280: 
                   8281: Variables that are defined using the = operator may be used read-only at
                   8282: run-time.
                   8283: 
                   8284: Variables whose name starts with an underscore must not be accessed outside the
                   8285: pkgsrc infrastructure at all. They may change without further notice.
                   8286: 
                   8287: Note
                   8288: 
                   8289: These conventions are currently not applied consistently to the complete pkgsrc
                   8290: infrastructure.
                   8291: 
                   8292: 23.2. Avoiding problems before they arise
                   8293: 
                   8294: All variables that contain lists of things should default to being empty. Two
                   8295: examples that do not follow this rule are USE_LANGUAGES and DISTFILES. These
                   8296: variables cannot simply be modified using the += operator in package Makefiles
                   8297: (or other files included by them), since there is no guarantee whether the
                   8298: variable is already set or not, and what its value is. In the case of
                   8299: DISTFILES, the packages "know" the default value and just define it as in the
                   8300: following example.
                   8301: 
                   8302: DISTFILES=      ${DISTNAME}${EXTRACT_SUFX} additional-files.tar.gz
                   8303: 
                   8304: Because of the selection of this default value, the same value appears in many
                   8305: package Makefiles. Similarly for USE_LANGUAGES, but in this case the default
                   8306: value ("c") is so short that it doesn't stand out. Nevertheless it is mentioned
                   8307: in many files.
                   8308: 
                   8309: 23.3. Variable evaluation
                   8310: 
                   8311: 23.3.1. At load time
                   8312: 
                   8313: Variable evaluation takes place either at load time or at runtime, depending on
                   8314: the context in which they occur. The contexts where variables are evaluated at
                   8315: load time are:
                   8316: 
                   8317:   * The right hand side of the := and != operators,
                   8318: 
                   8319:   * Make directives like .if or .for,
                   8320: 
                   8321:   * Dependency lines.
                   8322: 
                   8323: A special exception are references to the iteration variables of .for loops,
                   8324: which are expanded inline, no matter in which context they appear.
                   8325: 
                   8326: As the values of variables may change during load time, care must be taken not
                   8327: to evaluate them by accident. Typical examples for variables that should not be
                   8328: evaluated at load time are DEPENDS and CONFIGURE_ARGS. To make the effect more
                   8329: clear, here is an example:
                   8330: 
                   8331: CONFIGURE_ARGS=         # none
                   8332: CFLAGS=                 -O
                   8333: CONFIGURE_ARGS+=        CFLAGS=${CFLAGS:Q}
                   8334: 
                   8335: CONFIGURE_ARGS:=        ${CONFIGURE_ARGS}
                   8336: 
                   8337: CFLAGS+=                -Wall
                   8338: 
                   8339: 
                   8340: This code shows how the use of the := operator can quickly lead to unexpected
                   8341: results. The first paragraph is fairly common code. The second paragraph
                   8342: evaluates the CONFIGURE_ARGS variable, which results in CFLAGS=-O. In the third
                   8343: paragraph, the -Wall is appended to the CFLAGS, but this addition will not
                   8344: appear in CONFIGURE_ARGS. In actual code, the three paragraphs from above
                   8345: typically occur in completely unrelated files.
                   8346: 
                   8347: 23.3.2. At runtime
                   8348: 
                   8349: After all the files have been loaded, the values of the variables cannot be
                   8350: changed anymore. Variables that are used in the shell commands are expanded at
                   8351: this point.
                   8352: 
                   8353: 23.4. How can variables be specified?
                   8354: 
                   8355: There are many ways in which the definition and use of a variable can be
                   8356: restricted in order to detect bugs and violations of the (mostly unwritten)
                   8357: policies. See the pkglint developer's documentation for further details.
                   8358: 
                   8359: 23.5. Designing interfaces for Makefile fragments
                   8360: 
                   8361: Most of the .mk files fall into one of the following classes. Cases where a
                   8362: file falls into more than one class should be avoided as it often leads to
                   8363: subtle bugs.
                   8364: 
                   8365: 23.5.1. Procedures with parameters
                   8366: 
                   8367: In a traditional imperative programming language some of the .mk files could be
                   8368: described as procedures. They take some input parameters and?after inclusion?
                   8369: provide a result in output parameters. Since all variables in Makefiles have
                   8370: global scope care must be taken not to use parameter names that have already
                   8371: another meaning. For example, PKGNAME is a bad choice for a parameter name.
                   8372: 
                   8373: Procedures are completely evaluated at preprocessing time. That is, when
                   8374: calling a procedure all input parameters must be completely resolvable. For
                   8375: example, CONFIGURE_ARGS should never be an input parameter since it is very
                   8376: likely that further text will be added after calling the procedure, which would
                   8377: effectively apply the procedure to only a part of the variable. Also,
                   8378: references to other variables wit will be modified after calling the procedure.
                   8379: 
                   8380: A procedure can declare its output parameters either as suitable for use in
                   8381: preprocessing directives or as only available at runtime. The latter
                   8382: alternative is for variables that contain references to other runtime
                   8383: variables.
                   8384: 
                   8385: Procedures shall be written such that it is possible to call the procedure more
                   8386: than once. That is, the file must not contain multiple-inclusion guards.
                   8387: 
                   8388: Examples for procedures are mk/bsd.options.mk and mk/buildlink3/bsd.builtin.mk.
                   8389: To express that the parameters are evaluated at load time, they should be
                   8390: assigned using the := operator, which should be used only for this purpose.
                   8391: 
                   8392: 23.5.2. Actions taken on behalf of parameters
                   8393: 
                   8394: Action files take some input parameters and may define runtime variables. They
                   8395: shall not define loadtime variables. There are action files that are included
                   8396: implicitly by the pkgsrc infrastructure, while other must be included
                   8397: explicitly.
                   8398: 
                   8399: An example for action files is mk/subst.mk.
                   8400: 
                   8401: 23.6. The order in which files are loaded
                   8402: 
                   8403: Package Makefiles usually consist of a set of variable definitions, and include
                   8404: the file ../../mk/bsd.pkg.mk in the very last line. Before that, they may also
                   8405: include various other *.mk files if they need to query the availability of
                   8406: certain features like the type of compiler or the X11 implementation. Due to
                   8407: the heavy use of preprocessor directives like .if and .for, the order in which
                   8408: the files are loaded matters.
                   8409: 
                   8410: This section describes at which point the various files are loaded and gives
                   8411: reasons for that order.
                   8412: 
                   8413: 23.6.1. The order in bsd.prefs.mk
                   8414: 
                   8415: The very first action in bsd.prefs.mk is to define some essential variables
                   8416: like OPSYS, OS_VERSION and MACHINE_ARCH.
                   8417: 
1.4       rillig   8418: Then, the user settings are loaded from the file specified in MAKECONF, which
                   8419: is usually mk.conf. After that, those variables that have not been overridden
                   8420: by the user are loaded from mk/defaults/mk.conf.
1.1       dsieger  8421: 
                   8422: After the user settings, the system settings and platform settings are loaded,
                   8423: which may override the user settings.
                   8424: 
                   8425: Then, the tool definitions are loaded. The tool wrappers are not yet in effect.
                   8426: This only happens when building a package, so the proper variables must be used
                   8427: instead of the direct tool names.
                   8428: 
                   8429: As the last steps, some essential variables from the wrapper and the package
                   8430: system flavor are loaded, as well as the variables that have been cached in
                   8431: earlier phases of a package build.
                   8432: 
                   8433: 23.6.2. The order in bsd.pkg.mk
                   8434: 
                   8435: First, bsd.prefs.mk is loaded.
                   8436: 
                   8437: Then, the various *-vars.mk files are loaded, which fill default values for
                   8438: those variables that have not been defined by the package. These variables may
                   8439: later be used even in unrelated files.
                   8440: 
                   8441: Then, the file bsd.pkg.error.mk provides the target error-check that is added
                   8442: as a special dependency to all other targets that use DELAYED_ERROR_MSG or
                   8443: DELAYED_WARNING_MSG.
                   8444: 
                   8445: Then, the package-specific hacks from hacks.mk are included.
                   8446: 
                   8447: Then, various other files follow. Most of them don't have any dependencies on
                   8448: what they need to have included before or after them, though some do.
                   8449: 
                   8450: The code to check PKG_FAIL_REASON and PKG_SKIP_REASON is then executed, which
                   8451: restricts the use of these variables to all the files that have been included
                   8452: before. Appearances in later files will be silently ignored.
                   8453: 
                   8454: Then, the files for the main targets are included, in the order of later
                   8455: execution, though the actual order should not matter.
                   8456: 
                   8457: At last, some more files are included that don't set any interesting variables
                   8458: but rather just define make targets to be executed.
                   8459: 
                   8460: Chapter 24. Regression tests
                   8461: 
                   8462: Table of Contents
                   8463: 
                   8464: 24.1. The regression tests framework
                   8465: 24.2. Running the regression tests
                   8466: 24.3. Adding a new regression test
                   8467: 
                   8468:     24.3.1. Overridable functions
                   8469:     24.3.2. Helper functions
                   8470: 
                   8471: The pkgsrc infrastructure consists of a large codebase, and there are many
                   8472: corners where every little bit of a file is well thought out, making pkgsrc
                   8473: likely to fail as soon as anything is changed near those parts. To prevent most
                   8474: changes from breaking anything, a suite of regression tests should go along
                   8475: with every important part of the pkgsrc infrastructure. This chapter describes
                   8476: how regression tests work in pkgsrc and how you can add new tests.
                   8477: 
                   8478: 24.1. The regression tests framework
                   8479: 
                   8480: 24.2. Running the regression tests
                   8481: 
                   8482: You first need to install the pkgtools/pkg_regress package, which provides the
                   8483: pkg_regress command. Then you can simply run that command, which will run all
                   8484: tests in the regress category.
                   8485: 
                   8486: 24.3. Adding a new regression test
                   8487: 
                   8488: Every directory in the regress category that contains a file called spec is
                   8489: considered a regression test. This file is a shell program that is included by
                   8490: the pkg_regress command. The following functions can be overridden to suit your
                   8491: needs.
                   8492: 
                   8493: 24.3.1. Overridable functions
                   8494: 
                   8495: These functions do not take any parameters. They are all called in "set -e"
                   8496: mode, so you should be careful to check the exitcodes of any commands you run
                   8497: in the test.
                   8498: 
                   8499: do_setup()
                   8500: 
                   8501:     This function prepares the environment for the test. By default it does
                   8502:     nothing.
                   8503: 
                   8504: do_test()
                   8505: 
                   8506:     This function runs the actual test. By default, it calls TEST_MAKE with the
                   8507:     arguments MAKEARGS_TEST and writes its output including error messages into
                   8508:     the file TEST_OUTFILE.
                   8509: 
                   8510: check_result()
                   8511: 
                   8512:     This function is run after the test and is typically used to compare the
                   8513:     actual output from the one that is expected. It can make use of the various
                   8514:     helper functions from the next section.
                   8515: 
                   8516: do_cleanup()
                   8517: 
                   8518:     This function cleans everything up after the test has been run. By default
                   8519:     it does nothing.
                   8520: 
                   8521: 24.3.2. Helper functions
                   8522: 
                   8523: exit_status(expected)
                   8524: 
                   8525:     This function compares the exitcode of the do_test() function with its
                   8526:     first parameter. If they differ, the test will fail.
                   8527: 
                   8528: output_require(regex...)
                   8529: 
                   8530:     This function checks for each of its parameters if the output from do_test
                   8531:     () matches the extended regular expression. If it does not, the test will
                   8532:     fail.
                   8533: 
                   8534: output_prohibit(regex...)
                   8535: 
                   8536:     This function checks for each of its parameters if the output from do_test
                   8537:     () does not match the extended regular expression. If any of the regular
                   8538:     expressions matches, the test will fail.
                   8539: 
                   8540: Chapter 25. Porting pkgsrc
                   8541: 
                   8542: Table of Contents
                   8543: 
                   8544: 25.1. Porting pkgsrc to a new operating system
                   8545: 25.2. Adding support for a new compiler
                   8546: 
                   8547: The pkgsrc system has already been ported to many operating systems, hardware
                   8548: architectures and compilers. This chapter explains the necessary steps to make
                   8549: pkgsrc even more portable.
                   8550: 
                   8551: 25.1. Porting pkgsrc to a new operating system
                   8552: 
                   8553: To port pkgsrc to a new operating system (called MyOS in this example), you
                   8554: need to touch the following files:
                   8555: 
                   8556: pkgtools/bootstrap-mk-files/files/mods/MyOS.sys.mk
                   8557: 
                   8558:     This file contains some basic definitions, for example the name of the C
                   8559:     compiler.
                   8560: 
                   8561: mk/bsd.prefs.mk
                   8562: 
                   8563:     Insert code that defines the variables OPSYS, OS_VERSION, LOWER_OS_VERSION,
                   8564:     LOWER_VENDOR, MACHINE_ARCH, OBJECT_FMT, APPEND_ELF, and the other variables
                   8565:     that appear in this file.
                   8566: 
                   8567: mk/platform/MyOS.mk
                   8568: 
                   8569:     This file contains the platform-specific definitions that are used by
                   8570:     pkgsrc. Start by copying one of the other files and edit it to your needs.
                   8571: 
                   8572: mk/platform/MyOS.pkg.dist
                   8573: 
                   8574:     This file contains a list of directories, together with their permission
                   8575:     bits and ownership. These directories will be created automatically with
                   8576:     every package that explicitly sets USE_MTREE. This feature will be removed.
                   8577: 
                   8578: mk/platform/MyOS.x11.dist
                   8579: 
                   8580:     Just copy one of the pre-existing x11.dist files to your MyOS.x11.dist.
                   8581: 
                   8582: mk/tools/bootstrap.mk
                   8583: 
                   8584:     On some operating systems, the tools that are provided with the base system
                   8585:     are not good enough for pkgsrc. For example, there are many versions of sed
                   8586:     (1) that have a narrow limit on the line length they can process. Therefore
                   8587:     pkgsrc brings its own tools, which can be enabled here.
                   8588: 
                   8589: mk/tools/tools.MyOS.mk
                   8590: 
                   8591:     This file defines the paths to all the tools that are needed by one or the
                   8592:     other package in pkgsrc, as well as by pkgsrc itself. Find out where these
                   8593:     tools are on your platform and add them.
                   8594: 
                   8595: Now, you should be able to build some basic packages, like lang/perl5, shells/
                   8596: bash.
                   8597: 
                   8598: 25.2. Adding support for a new compiler
                   8599: 
                   8600: TODO
                   8601: 
                   8602: Appendix A. A simple example package: bison
                   8603: 
                   8604: Table of Contents
                   8605: 
                   8606: A.1. files
                   8607: 
                   8608:     A.1.1. Makefile
                   8609:     A.1.2. DESCR
                   8610:     A.1.3. PLIST
                   8611:     A.1.4. Checking a package with pkglint
                   8612: 
                   8613: A.2. Steps for building, installing, packaging
                   8614: 
                   8615: We checked to find a piece of software that wasn't in the packages collection,
                   8616: and picked GNU bison. Quite why someone would want to have bison when Berkeley
                   8617: yacc is already present in the tree is beyond us, but it's useful for the
                   8618: purposes of this exercise.
                   8619: 
                   8620: A.1. files
                   8621: 
                   8622: A.1.1. Makefile
                   8623: 
1.2       rillig   8624: # $NetBSD$
1.1       dsieger  8625: #
                   8626: 
                   8627: DISTNAME=       bison-1.25
                   8628: CATEGORIES=     devel
                   8629: MASTER_SITES=   ${MASTER_SITE_GNU}
                   8630: 
                   8631: MAINTAINER=     thorpej@NetBSD.org
                   8632: HOMEPAGE=       http://www.gnu.org/software/bison/bison.html
                   8633: COMMENT=        GNU yacc clone
                   8634: 
                   8635: GNU_CONFIGURE=  yes
                   8636: INFO_FILES=     bison.info
                   8637: 
                   8638: .include "../../mk/bsd.pkg.mk"
                   8639: 
                   8640: A.1.2. DESCR
                   8641: 
                   8642: GNU version of yacc.  Can make re-entrant parsers, and numerous other
                   8643: improvements.  Why you would want this when Berkeley yacc(1) is part
                   8644: of the NetBSD source tree is beyond me.
                   8645: 
                   8646: A.1.3. PLIST
                   8647: 
1.2       rillig   8648: @comment $NetBSD$
1.1       dsieger  8649: bin/bison
                   8650: man/man1/bison.1.gz
                   8651: share/bison.simple
                   8652: share/bison.hairy
                   8653: 
                   8654: A.1.4. Checking a package with pkglint
                   8655: 
                   8656: The NetBSD package system comes with pkgtools/pkglint which helps to check the
                   8657: contents of these files. After installation it is quite easy to use, just
                   8658: change to the directory of the package you wish to examine and execute pkglint:
                   8659: 
                   8660: $ pkglint
                   8661: looks fine.
                   8662: 
                   8663: Depending on the supplied command line arguments (see pkglint(1)), more checks
                   8664: will be performed. Use e.g. pkglint -Call -Wall for a very thorough check.
                   8665: 
                   8666: A.2. Steps for building, installing, packaging
                   8667: 
                   8668: Create the directory where the package lives, plus any auxiliary directories:
                   8669: 
                   8670: # cd /usr/pkgsrc/lang
                   8671: # mkdir bison
                   8672: # cd bison
                   8673: # mkdir patches
                   8674: 
                   8675: Create Makefile, DESCR and PLIST (see Chapter 10, Package components - files,
                   8676: directories and contents) then continue with fetching the distfile:
                   8677: 
                   8678: # make fetch
                   8679: >> bison-1.25.tar.gz doesn't seem to exist on this system.
                   8680: >> Attempting to fetch from ftp://prep.ai.mit.edu/pub/gnu//.
                   8681: Requesting ftp://prep.ai.mit.edu/pub/gnu//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/)
                   8682: ftp: Error retrieving file: 500 Internal error
                   8683: 
                   8684: >> Attempting to fetch from ftp://wuarchive.wustl.edu/systems/gnu//.
                   8685: Requesting ftp://wuarchive.wustl.edu/systems/gnu//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/)
                   8686: ftp: Error retrieving file: 500 Internal error
                   8687: 
                   8688: >> Attempting to fetch from ftp://ftp.freebsd.org/pub/FreeBSD/distfiles//.
                   8689: Requesting ftp://ftp.freebsd.org/pub/FreeBSD/distfiles//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/)
                   8690: Successfully retrieved file.
                   8691: 
                   8692: Generate the checksum of the distfile into distinfo:
                   8693: 
                   8694: # make makedistinfo
                   8695: 
                   8696: Now compile:
                   8697: 
                   8698: # make
                   8699: >> Checksum OK for bison-1.25.tar.gz.
                   8700: ===>  Extracting for bison-1.25
                   8701: ===>  Patching for bison-1.25
                   8702: ===>   Ignoring empty patch directory
                   8703: ===>  Configuring for bison-1.25
                   8704: creating cache ./config.cache
                   8705: checking for gcc... cc
                   8706: checking whether we are using GNU C... yes
                   8707: checking for a BSD compatible install... /usr/bin/install -c -o bin -g bin
                   8708: checking how to run the C preprocessor... cc -E
                   8709: checking for minix/config.h... no
                   8710: checking for POSIXized ISC... no
                   8711: checking whether cross-compiling... no
                   8712: checking for ANSI C header files... yes
                   8713: checking for string.h... yes
                   8714: checking for stdlib.h... yes
                   8715: checking for memory.h... yes
                   8716: checking for working const... yes
                   8717: checking for working alloca.h... no
                   8718: checking for alloca... yes
                   8719: checking for strerror... yes
                   8720: updating cache ./config.cache
                   8721: creating ./config.status
                   8722: creating Makefile
                   8723: ===>  Building for bison-1.25
                   8724: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g LR0.c
                   8725: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g allocate.c
                   8726: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g closure.c
                   8727: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g conflicts.c
                   8728: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g derives.c
                   8729: cc -c -DXPFILE=\"/usr/pkg/share/bison.simple\"  -DXPFILE1=\"/usr/pkg/share/bison.hairy\" -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1  -g  ./files.c
                   8730: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g getargs.c
                   8731: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g gram.c
                   8732: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g lalr.c
                   8733: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g lex.c
                   8734: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g main.c
                   8735: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g nullable.c
                   8736: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g output.c
                   8737: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g print.c
                   8738: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g reader.c
                   8739: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g reduce.c
                   8740: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g symtab.c
                   8741: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g warshall.c
                   8742: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g version.c
                   8743: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g getopt.c
                   8744: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g getopt1.c
                   8745: cc  -g -o bison LR0.o allocate.o closure.o conflicts.o derives.o files.o         getargs.o gram.o lalr.o lex.o                                   main.o nullable.o output.o print.o reader.o reduce.o symtab.o   warshall.o version.o getopt.o getopt1.o
                   8746: ./files.c:240: warning: mktemp() possibly used unsafely, consider using mkstemp()
                   8747: rm -f bison.s1
                   8748: sed -e "/^#line/ s|bison|/usr/pkg/share/bison|" < ./bison.simple > bison.s1
                   8749: 
                   8750: Everything seems OK, so install the files:
                   8751: 
                   8752: # make install
                   8753: >> Checksum OK for bison-1.25.tar.gz.
                   8754: ===>  Installing for bison-1.25
                   8755: sh ./mkinstalldirs /usr/pkg/bin /usr/pkg/share  /usr/pkg/info /usr/pkg/man/man1
                   8756: rm -f /usr/pkg/bin/bison
                   8757: cd /usr/pkg/share; rm -f bison.simple bison.hairy
                   8758: rm -f /usr/pkg/man/man1/bison.1 /usr/pkg/info/bison.info*
                   8759: install -c  -o bin -g bin -m 555 bison /usr/pkg/bin/bison
                   8760: /usr/bin/install -c -o bin -g bin -m 644 bison.s1 /usr/pkg/share/bison.simple
                   8761: /usr/bin/install -c -o bin -g bin -m 644 ./bison.hairy /usr/pkg/share/bison.hairy
                   8762: cd .; for f in bison.info*;  do /usr/bin/install -c -o bin -g bin -m 644 $f /usr/pkg/info/$f; done
                   8763: /usr/bin/install -c -o bin -g bin -m 644 ./bison.1 /usr/pkg/man/man1/bison.1
                   8764: ===>  Registering installation for bison-1.25
                   8765: 
                   8766: You can now use bison, and also - if you decide so - remove it with pkg_delete
                   8767: bison. Should you decide that you want a binary package, do this now:
                   8768: 
                   8769: # make package
                   8770: >> Checksum OK for bison-1.25.tar.gz.
                   8771: ===>  Building package for bison-1.25
                   8772: Creating package bison-1.25.tgz
                   8773: Registering depends:.
                   8774: Creating gzip'd tar ball in '/u/pkgsrc/lang/bison/bison-1.25.tgz'
                   8775: 
                   8776: Now that you don't need the source and object files any more, clean up:
                   8777: 
                   8778: # make clean
                   8779: ===>  Cleaning for bison-1.25
                   8780: 
                   8781: Appendix B. Build logs
                   8782: 
                   8783: Table of Contents
                   8784: 
                   8785: B.1. Building figlet
                   8786: B.2. Packaging figlet
                   8787: 
                   8788: B.1. Building figlet
                   8789: 
                   8790: # make
                   8791: ===> Checking for vulnerabilities in figlet-2.2.1nb2
                   8792: => figlet221.tar.gz doesn't seem to exist on this system.
                   8793: => Attempting to fetch figlet221.tar.gz from ftp://ftp.figlet.org/pub/figlet/program/unix/.
                   8794: => [172219 bytes]
                   8795: Connected to ftp.plig.net.
                   8796: 220 ftp.plig.org NcFTPd Server (licensed copy) ready.
                   8797: 331 Guest login ok, send your complete e-mail address as password.
                   8798: 230-You are user #5 of 500 simultaneous users allowed.
                   8799: 230-
                   8800: 230-  ___ _             _ _
                   8801: 230- |  _| |_ ___   ___| |_|___   ___ ___ ___
                   8802: 230- |  _|  _| . |_| . | | | . |_| . |  _| . |
                   8803: 230- |_| |_| |  _|_|  _|_|_|_  |_|___|_| |_  |
                   8804: 230-         |_|   |_|     |___|         |___|
                   8805: 230-
                   8806: 230-** Welcome to ftp.plig.org **
                   8807: 230-
                   8808: 230-Please note that all transfers from this FTP site are logged. If you
                   8809: 230-do not like this, please disconnect now.
                   8810: 230-
                   8811: 230-This arhive is available via
                   8812: 230-
                   8813: 230-HTTP:  http://ftp.plig.org/
                   8814: 230-FTP:   ftp://ftp.plig.org/     (max 500 connections)
                   8815: 230-RSYNC: rsync://ftp.plig.org/   (max  30 connections)
                   8816: 230-
                   8817: 230-Please email comments, bug reports and requests for packages to be
                   8818: 230-mirrored to ftp-admin@plig.org.
                   8819: 230-
                   8820: 230-
                   8821: 230 Logged in anonymously.
                   8822: Remote system type is UNIX.
                   8823: Using binary mode to transfer files.
                   8824: 200 Type okay.
                   8825: 250 "/pub" is new cwd.
                   8826: 250-"/pub/figlet" is new cwd.
                   8827: 250-
                   8828: 250-Welcome to the figlet archive at ftp.figlet.org
                   8829: 250-
                   8830: 250-    ftp://ftp.figlet.org/pub/figlet/
                   8831: 250-
                   8832: 250-The official FIGlet web page is:
                   8833: 250-    http://www.figlet.org/
                   8834: 250-
                   8835: 250-If you have questions, please mailto:info@figlet.org. If you want to
                   8836: 250-contribute a font or something else, you can email us.
                   8837: 250
                   8838: 250 "/pub/figlet/program" is new cwd.
                   8839: 250 "/pub/figlet/program/unix" is new cwd.
                   8840: local: figlet221.tar.gz remote: figlet221.tar.gz
                   8841: 502 Unimplemented command.
                   8842: 227 Entering Passive Mode (195,40,6,41,246,104)
                   8843: 150 Data connection accepted from 84.128.86.72:65131; transfer starting for figlet221.tar.gz (172219 bytes).
                   8844: 38% |**************                       | 65800      64.16 KB/s    00:01 ETA
                   8845: 226 Transfer completed.
                   8846: 172219 bytes received in 00:02 (75.99 KB/s)
                   8847: 221 Goodbye.
                   8848: => Checksum OK for figlet221.tar.gz.
                   8849: ===> Extracting for figlet-2.2.1nb2
                   8850: ===> Required installed package ccache-[0-9]*: ccache-2.3nb1 found
                   8851: ===> Patching for figlet-2.2.1nb2
                   8852: ===> Applying pkgsrc patches for figlet-2.2.1nb2
                   8853: ===> Overriding tools for figlet-2.2.1nb2
                   8854: ===> Creating toolchain wrappers for figlet-2.2.1nb2
                   8855: ===> Configuring for figlet-2.2.1nb2
                   8856: ===> Building for figlet-2.2.1nb2
                   8857: gcc -O2 -DDEFAULTFONTDIR=\"/usr/pkg/share/figlet\"  -DDEFAULTFONTFILE=\"standard.flf\"  figlet.c zipio.c crc.c inflate.c -o figlet
                   8858: chmod a+x figlet
                   8859: gcc -O2 -o chkfont chkfont.c
                   8860: => Unwrapping files-to-be-installed.
                   8861: #
                   8862: # make install
                   8863: ===> Checking for vulnerabilities in figlet-2.2.1nb2
                   8864: ===> Installing for figlet-2.2.1nb2
                   8865: install -d -o root -g wheel -m 755 /usr/pkg/bin
                   8866: install -d -o root -g wheel -m 755 /usr/pkg/man/man6
                   8867: mkdir -p /usr/pkg/share/figlet
                   8868: cp figlet /usr/pkg/bin
                   8869: cp chkfont /usr/pkg/bin
                   8870: chmod 555 figlist showfigfonts
                   8871: cp figlist /usr/pkg/bin
                   8872: cp showfigfonts /usr/pkg/bin
                   8873: cp fonts/*.flf /usr/pkg/share/figlet
                   8874: cp fonts/*.flc /usr/pkg/share/figlet
                   8875: cp figlet.6 /usr/pkg/man/man6
                   8876: ===> Registering installation for figlet-2.2.1nb2
                   8877: #
                   8878: 
                   8879: B.2. Packaging figlet
                   8880: 
                   8881: # make package
                   8882: ===> Checking for vulnerabilities in figlet-2.2.1nb2
                   8883: ===> Packaging figlet-2.2.1nb2
                   8884: ===> Building binary package for figlet-2.2.1nb2
                   8885: Creating package /home/cvs/pkgsrc/packages/i386/All/figlet-2.2.1nb2.tgz
                   8886: Using SrcDir value of /usr/pkg
                   8887: Registering depends:.
                   8888: #
                   8889: 
                   8890: Appendix C. Directory layout of the pkgsrc FTP server
                   8891: 
                   8892: Table of Contents
                   8893: 
                   8894: C.1. bootstrap-pkgsrc: Bootstrap kits
                   8895: C.2. distfiles: The distributed source files
                   8896: C.3. iso: Currently empty
                   8897: C.4. misc: Miscellaneous things
1.3       rillig   8898: C.5. packages: Binary packages
1.1       dsieger  8899: C.6. current, pkgsrc-200xQy: source packages
                   8900: 
                   8901: As in other big projects, the directory layout of pkgsrc is quite complex for
                   8902: newbies. This chapter explains where you find things on the FTP server. The
                   8903: base directory on ftp.NetBSD.org is /pub/pkgsrc/. On other servers it may be
                   8904: different, but inside this directory, everything should look the same, no
                   8905: matter on which server you are. This directory contains some subdirectories,
                   8906: which are explained below.
                   8907: 
                   8908: C.1. bootstrap-pkgsrc: Bootstrap kits
                   8909: 
                   8910: For those who only want to manage binary packages on systems other than NetBSD,
                   8911: we provide the package management tools in a separate, small tar file.
                   8912: 
                   8913: C.2. distfiles: The distributed source files
                   8914: 
                   8915: The directory distfiles contains lots of archive files from all pkgsrc
                   8916: packages, which are mirrored here. The subdirectories are called after their
                   8917: package names and are used when the distributed files have names that don't
                   8918: explicitly contain a version number or are otherwise too generic (for example
                   8919: release.tar.gz).
                   8920: 
                   8921: C.3. iso: Currently empty
                   8922: 
                   8923: This directory is currently not in use.
                   8924: 
                   8925: C.4. misc: Miscellaneous things
                   8926: 
                   8927: This directory contains things that individual pkgsrc developers find worth
                   8928: publishing.
                   8929: 
1.3       rillig   8930: C.5. packages: Binary packages
1.1       dsieger  8931: 
1.3       rillig   8932: This directory contains binary packages for the various platforms that are
                   8933: supported by pkgsrc. Each subdirectory is of the form OPSYS/ARCH/OSVERSION_TAG.
                   8934: The meaning of these variables is:
                   8935: 
                   8936:   * OPSYS is the name of the operating system for which the packages have been
                   8937:     built,
                   8938: 
                   8939:   * ARCH is the hardware architecture,
                   8940: 
                   8941:   * OSVERSION is the version of the operating system,
                   8942: 
                   8943:   * TAG is either 200xQy for a stable branch, or head for packages built from
                   8944:     the HEAD branch.
                   8945: 
                   8946: The rationale for exactly this scheme is that the pkgsrc users looking for
                   8947: binary packages can quickly click through the directories on the server and
                   8948: find the best binary packages for their machines. Since they usually know the
                   8949: operating system and the hardware architecture, OPSYS and ARCH are placed
                   8950: first. After these choices, they can select the best combination of OSVERSION
                   8951: and TAG together, since it is usually the case that packages stay compatible
                   8952: between different version of the operating system.
                   8953: 
                   8954: In each of these directories, there is a whole binary packages collection for a
                   8955: specific platform. It has a directory called All which contains all binary
                   8956: packages. Besides that, there are various category directories that contain
                   8957: symbolic links to the real binary packages.
1.1       dsieger  8958: 
                   8959: C.6. current, pkgsrc-200xQy: source packages
                   8960: 
                   8961: These directories contain the "real" pkgsrc, that is the files that define how
                   8962: to create binary packages from source archives.
                   8963: 
                   8964: The directory pkgsrc contains a snapshot of the CVS repository, which is
                   8965: updated regularly. The file pkgsrc.tar.gz contains the same as the directory,
                   8966: ready to be downloaded as a whole.
                   8967: 
                   8968: In the directories for the quarterly branches, there is an additional file
                   8969: called pkgsrc-200xQy.tar.gz, which contains the state of pkgsrc when it was
                   8970: branched.
                   8971: 
                   8972: Appendix D. Editing guidelines for the pkgsrc guide
                   8973: 
                   8974: Table of Contents
                   8975: 
                   8976: D.1. Make targets
                   8977: D.2. Procedure
                   8978: 
                   8979: This section contains information on editing the pkgsrc guide itself.
                   8980: 
                   8981: D.1. Make targets
                   8982: 
                   8983: The pkgsrc guide's source code is stored in pkgsrc/doc/guide/files, and several
                   8984: files are created from it:
                   8985: 
                   8986:   * pkgsrc/doc/pkgsrc.txt
                   8987: 
                   8988:   * pkgsrc/doc/pkgsrc.html
                   8989: 
1.2       rillig   8990:   * http://www.NetBSD.org/docs/pkgsrc/
1.1       dsieger  8991: 
1.2       rillig   8992:   * http://www.NetBSD.org/docs/pkgsrc/pkgsrc.pdf: The PDF version of the pkgsrc
                   8993:     guide.
1.1       dsieger  8994: 
1.2       rillig   8995:   * http://www.NetBSD.org/docs/pkgsrc/pkgsrc.ps: PostScript version of the
                   8996:     pkgsrc guide.
1.1       dsieger  8997: 
                   8998: D.2. Procedure
                   8999: 
                   9000: The procedure to edit the pkgsrc guide is:
                   9001: 
                   9002:  1. Make sure you have the packages needed to regenerate the pkgsrc guide (and
                   9003:     other XML-based NetBSD documentation) installed. These are meta-pkgs/
                   9004:     netbsd-doc for creating the ASCII and HTML versions, and meta-pkgs/
                   9005:     netbsd-doc-print for the PostScript and PDF versions. You will need both
                   9006:     packages installed, to make sure documentation is consistent across all
                   9007:     formats.
                   9008: 
                   9009:  2. Run cd doc/guide to get to the right directory. All further steps will take
                   9010:     place here.
                   9011: 
                   9012:  3. Edit the XML file(s) in files/.
                   9013: 
                   9014:  4. Run bmake to check the pkgsrc guide for valid XML and to build the final
                   9015:     output files. If you get any errors at this stage, you can just edit the
                   9016:     files, as there are only symbolic links in the working directory, pointing
                   9017:     to the files in files/.
                   9018: 
                   9019:  5. (cd files && cvs commit)
                   9020: 
                   9021:  6. Run bmake clean && bmake to regenerate the output files with the proper RCS
                   9022:     Ids.
                   9023: 
                   9024:  7. Run bmake regen to install and commit the files in both pkgsrc/doc and
                   9025:     htdocs.
                   9026: 
                   9027:     Note
                   9028: 
                   9029:     If you have added, removed or renamed some chapters, you need to
                   9030:     synchronize them using cvs add or cvs delete in the htdocs directory.
                   9031: 

CVSweb <webmaster@jp.NetBSD.org>