Annotation of htdocs/docs/pkgsrc/pkgsrc.txt, revision 1.129

1.1       dsieger     1: The pkgsrc guide
                      2: 
                      3: Documentation on the NetBSD packages system
                      4: 
                      5: Alistair Crooks
                      6: 
                      7: <agc@NetBSD.org>
                      8: 
                      9: Hubert Feyrer
                     10: 
                     11: <hubertf@NetBSD.org>
                     12: 
                     13: The pkgsrc Developers
                     14: 
1.128     jnemeth    15: Copyright   1994-2017 The NetBSD Foundation, Inc
1.1       dsieger    16: 
1.128     jnemeth    17: $NetBSD: pkgsrc.xml,v 1.31 2017/07/30 22:07:39 jnemeth Exp $
1.1       dsieger    18: 
                     19: Abstract
                     20: 
                     21: pkgsrc is a centralized package management system for Unix-like operating
                     22: systems. This guide provides information for users and developers of pkgsrc. It
                     23: covers installation of binary and source packages, creation of binary and
                     24: source packages and a high-level overview about the infrastructure.
                     25: 
                     26: -------------------------------------------------------------------------------
                     27: 
                     28: Table of Contents
                     29: 
                     30: 1. What is pkgsrc?
                     31: 
                     32:     1.1. Introduction
                     33: 
                     34:         1.1.1. Why pkgsrc?
                     35:         1.1.2. Supported platforms
                     36: 
                     37:     1.2. Overview
                     38:     1.3. Terminology
                     39: 
                     40:         1.3.1. Roles involved in pkgsrc
                     41: 
                     42:     1.4. Typography
                     43: 
                     44: I. The pkgsrc user's guide
                     45: 
                     46:     2. Where to get pkgsrc and how to keep it up-to-date
                     47: 
                     48:         2.1. Getting pkgsrc for the first time
                     49: 
1.52      asau       50:             2.1.1. As tar archive
1.24      wiz        51:             2.1.2. Via anonymous CVS
1.1       dsieger    52: 
                     53:         2.2. Keeping pkgsrc up-to-date
                     54: 
                     55:             2.2.1. Via tar files
                     56:             2.2.2. Via CVS
                     57: 
                     58:     3. Using pkgsrc on systems other than NetBSD
                     59: 
                     60:         3.1. Binary distribution
                     61:         3.2. Bootstrapping pkgsrc
                     62: 
                     63:     4. Using pkgsrc
                     64: 
                     65:         4.1. Using binary packages
                     66: 
                     67:             4.1.1. Finding binary packages
                     68:             4.1.2. Installing binary packages
                     69:             4.1.3. Deinstalling packages
                     70:             4.1.4. Getting information about installed packages
                     71:             4.1.5. Checking for security vulnerabilities in installed packages
                     72:             4.1.6. Finding if newer versions of your installed packages are in
                     73:                 pkgsrc
                     74:             4.1.7. Other administrative functions
                     75: 
                     76:         4.2. Building packages from source
                     77: 
                     78:             4.2.1. Requirements
                     79:             4.2.2. Fetching distfiles
                     80:             4.2.3. How to build and install
                     81: 
                     82:     5. Configuring pkgsrc
                     83: 
                     84:         5.1. General configuration
                     85:         5.2. Variables affecting the build process
1.9       rillig     86:         5.3. Variables affecting the installation process
1.4       rillig     87:         5.4. Selecting and configuring the compiler
1.1       dsieger    88: 
1.4       rillig     89:             5.4.1. Selecting the compiler
                     90:             5.4.2. Additional flags to the compiler (CFLAGS)
                     91:             5.4.3. Additional flags to the linker (LDFLAGS)
1.1       dsieger    92: 
1.4       rillig     93:         5.5. Developer/advanced settings
                     94:         5.6. Selecting Build Options
1.1       dsieger    95: 
                     96:     6. Creating binary packages
                     97: 
                     98:         6.1. Building a single binary package
                     99:         6.2. Settings for creation of binary packages
                    100: 
1.6       rillig    101:     7. Creating binary packages for everything in pkgsrc (bulk builds)
                    102: 
1.71      wiz       103:         7.1. Preparations
                    104:         7.2. Running a pbulk-style bulk build
1.6       rillig    105: 
1.71      wiz       106:             7.2.1. Configuration
1.6       rillig    107: 
1.71      wiz       108:         7.3. Requirements of a full bulk build
1.66      asau      109:         7.4. Creating a multiple CD-ROM packages collection
1.6       rillig    110: 
1.66      asau      111:             7.4.1. Example of cdpack
1.6       rillig    112: 
                    113:     8. Directory layout of the installed files
                    114: 
                    115:         8.1. File system layout in ${LOCALBASE}
                    116:         8.2. File system layout in ${VARBASE}
                    117: 
                    118:     9. Frequently Asked Questions
                    119: 
                    120:         9.1. Are there any mailing lists for pkg-related discussion?
1.84      wiz       121:         9.2. Utilities for package management (pkgtools)
                    122:         9.3. How to use pkgsrc as non-root
                    123:         9.4. How to resume transfers when fetching distfiles?
                    124:         9.5. How can I install/use modular X.org from pkgsrc?
                    125:         9.6. How to fetch files from behind a firewall
                    126:         9.7. How to fetch files from HTTPS sites
                    127:         9.8. How do I tell make fetch to do passive FTP?
                    128:         9.9. How to fetch all distfiles at once
                    129:         9.10. What does "Don't know how to make /usr/share/tmac/tmac.andoc"
1.24      wiz       130:             mean?
1.84      wiz       131:         9.11. What does "Could not find bsd.own.mk" mean?
                    132:         9.12. Using 'sudo' with pkgsrc
                    133:         9.13. How do I change the location of configuration files?
                    134:         9.14. Automated security checks
                    135:         9.15. Why do some packages ignore my CFLAGS?
                    136:         9.16. A package does not build. What shall I do?
                    137:         9.17. What does "Makefile appears to contain unresolved cvs/rcs/???
1.24      wiz       138:             merge conflicts" mean?
1.1       dsieger   139: 
                    140: II. The pkgsrc developer's guide
                    141: 
1.6       rillig    142:     10. Creating a new pkgsrc package from scratch
1.1       dsieger   143: 
1.6       rillig    144:         10.1. Common types of packages
1.1       dsieger   145: 
1.6       rillig    146:             10.1.1. Perl modules
1.121     sevan     147:             10.1.2. KDE3 & KDE4 applications
1.17      imil      148:             10.1.3. Python modules and programs
1.1       dsieger   149: 
1.6       rillig    150:         10.2. Examples
1.1       dsieger   151: 
1.6       rillig    152:             10.2.1. How the www/nvu package came into pkgsrc
1.1       dsieger   153: 
1.6       rillig    154:     11. Package components - files, directories and contents
1.1       dsieger   155: 
1.6       rillig    156:         11.1. Makefile
                    157:         11.2. distinfo
                    158:         11.3. patches/*
1.1       dsieger   159: 
1.6       rillig    160:             11.3.1. Structure of a single patch file
                    161:             11.3.2. Creating patch files
                    162:             11.3.3. Sources where the patch files come from
                    163:             11.3.4. Patching guidelines
                    164:             11.3.5. Feedback to the author
1.1       dsieger   165: 
1.6       rillig    166:         11.4. Other mandatory files
                    167:         11.5. Optional files
1.1       dsieger   168: 
1.6       rillig    169:             11.5.1. Files affecting the binary package
                    170:             11.5.2. Files affecting the build process
                    171:             11.5.3. Files affecting nothing at all
1.1       dsieger   172: 
1.6       rillig    173:         11.6. work*
                    174:         11.7. files/*
1.1       dsieger   175: 
1.6       rillig    176:     12. Programming in Makefiles
1.1       dsieger   177: 
1.6       rillig    178:         12.1. Caveats
                    179:         12.2. Makefile variables
1.1       dsieger   180: 
1.6       rillig    181:             12.2.1. Naming conventions
1.1       dsieger   182: 
1.6       rillig    183:         12.3. Code snippets
1.1       dsieger   184: 
1.6       rillig    185:             12.3.1. Adding things to a list
1.117     sevan     186:             12.3.2. Echoing a string exactly as-is
1.108     rillig    187:             12.3.3. Passing CFLAGS to GNU configure scripts
                    188:             12.3.4. Handling possibly empty variables
1.1       dsieger   189: 
1.6       rillig    190:     13. PLIST issues
1.1       dsieger   191: 
1.6       rillig    192:         13.1. RCS ID
                    193:         13.2. Semi-automatic PLIST generation
                    194:         13.3. Tweaking output of make print-PLIST
                    195:         13.4. Variable substitution in PLIST
                    196:         13.5. Man page compression
                    197:         13.6. Changing PLIST source with PLIST_SRC
                    198:         13.7. Platform-specific and differing PLISTs
1.86      wiz       199:         13.8. Build-specific PLISTs
                    200:         13.9. Sharing directories between packages
1.1       dsieger   201: 
1.6       rillig    202:     14. Buildlink methodology
1.1       dsieger   203: 
1.6       rillig    204:         14.1. Converting packages to use buildlink3
                    205:         14.2. Writing buildlink3.mk files
1.1       dsieger   206: 
1.6       rillig    207:             14.2.1. Anatomy of a buildlink3.mk file
1.27      wiz       208:             14.2.2. Updating BUILDLINK_API_DEPENDS.pkg and
                    209:                 BUILDLINK_ABI_DEPENDS.pkg in buildlink3.mk files
1.1       dsieger   210: 
1.6       rillig    211:         14.3. Writing builtin.mk files
1.1       dsieger   212: 
1.6       rillig    213:             14.3.1. Anatomy of a builtin.mk file
                    214:             14.3.2. Global preferences for native or pkgsrc software
1.1       dsieger   215: 
1.6       rillig    216:     15. The pkginstall framework
1.1       dsieger   217: 
1.6       rillig    218:         15.1. Files and directories outside the installation prefix
1.1       dsieger   219: 
1.6       rillig    220:             15.1.1. Directory manipulation
                    221:             15.1.2. File manipulation
1.1       dsieger   222: 
1.6       rillig    223:         15.2. Configuration files
1.1       dsieger   224: 
1.6       rillig    225:             15.2.1. How PKG_SYSCONFDIR is set
                    226:             15.2.2. Telling the software where configuration files are
                    227:             15.2.3. Patching installations
                    228:             15.2.4. Disabling handling of configuration files
1.1       dsieger   229: 
1.6       rillig    230:         15.3. System startup scripts
1.1       dsieger   231: 
1.6       rillig    232:             15.3.1. Disabling handling of system startup scripts
1.1       dsieger   233: 
1.6       rillig    234:         15.4. System users and groups
                    235:         15.5. System shells
1.1       dsieger   236: 
1.6       rillig    237:             15.5.1. Disabling shell registration
1.1       dsieger   238: 
1.6       rillig    239:         15.6. Fonts
1.1       dsieger   240: 
1.6       rillig    241:             15.6.1. Disabling automatic update of the fonts databases
1.1       dsieger   242: 
1.6       rillig    243:     16. Options handling
1.1       dsieger   244: 
1.6       rillig    245:         16.1. Global default options
                    246:         16.2. Converting packages to use bsd.options.mk
                    247:         16.3. Option Names
1.7       rillig    248:         16.4. Determining the options of dependencies
1.1       dsieger   249: 
1.6       rillig    250:     17. The build process
1.1       dsieger   251: 
1.6       rillig    252:         17.1. Introduction
                    253:         17.2. Program location
                    254:         17.3. Directories used during the build process
                    255:         17.4. Running a phase
                    256:         17.5. The fetch phase
1.1       dsieger   257: 
1.6       rillig    258:             17.5.1. What to fetch and where to get it from
                    259:             17.5.2. How are the files fetched?
1.1       dsieger   260: 
1.6       rillig    261:         17.6. The checksum phase
                    262:         17.7. The extract phase
                    263:         17.8. The patch phase
                    264:         17.9. The tools phase
                    265:         17.10. The wrapper phase
                    266:         17.11. The configure phase
                    267:         17.12. The build phase
                    268:         17.13. The test phase
                    269:         17.14. The install phase
                    270:         17.15. The package phase
                    271:         17.16. Cleaning up
                    272:         17.17. Other helpful targets
1.1       dsieger   273: 
1.6       rillig    274:     18. Tools needed for building or running
1.1       dsieger   275: 
1.6       rillig    276:         18.1. Tools for pkgsrc builds
                    277:         18.2. Tools needed by packages
                    278:         18.3. Tools provided by platforms
1.1       dsieger   279: 
1.6       rillig    280:     19. Making your package work
1.1       dsieger   281: 
1.6       rillig    282:         19.1. General operation
1.1       dsieger   283: 
1.108     rillig    284:             19.1.1. How to pull in user-settable variables from mk.conf
                    285:             19.1.2. User interaction
                    286:             19.1.3. Handling licenses
                    287:             19.1.4. Restricted packages
                    288:             19.1.5. Handling dependencies
                    289:             19.1.6. Handling conflicts with other packages
                    290:             19.1.7. Packages that cannot or should not be built
                    291:             19.1.8. Packages which should not be deleted, once installed
                    292:             19.1.9. Handling packages with security problems
                    293:             19.1.10. How to handle incrementing versions when fixing an
1.1       dsieger   294:                 existing package
1.108     rillig    295:             19.1.11. Substituting variable text in the package files (the SUBST
1.1       dsieger   296:                 framework)
                    297: 
1.108     rillig    298:         19.2. The fetch phase
1.1       dsieger   299: 
1.6       rillig    300:             19.2.1. Packages whose distfiles aren't available for plain
1.1       dsieger   301:                 downloading
1.6       rillig    302:             19.2.2. How to handle modified distfiles with the 'old' name
1.88      tnn       303:             19.2.3. Packages hosted on github.com
1.1       dsieger   304: 
1.108     rillig    305:         19.3. The configure phase
1.1       dsieger   306: 
1.6       rillig    307:             19.3.1. Shared libraries - libtool
                    308:             19.3.2. Using libtool on GNU packages that already support libtool
                    309:             19.3.3. GNU Autoconf/Automake
                    310: 
                    311:         19.4. Programming languages
                    312: 
                    313:             19.4.1. C, C++, and Fortran
                    314:             19.4.2. Java
                    315:             19.4.3. Packages containing perl scripts
1.41      wiz       316:             19.4.4. Packages containing shell scripts
                    317:             19.4.5. Other programming languages
1.6       rillig    318: 
1.108     rillig    319:         19.5. The build phase
1.6       rillig    320: 
                    321:             19.5.1. Compiling C and C++ code conditionally
                    322:             19.5.2. How to handle compiler bugs
1.24      wiz       323:             19.5.3. Undefined reference to "..."
1.6       rillig    324:             19.5.4. Running out of memory
                    325: 
1.108     rillig    326:         19.6. The install phase
1.6       rillig    327: 
                    328:             19.6.1. Creating needed directories
                    329:             19.6.2. Where to install documentation
                    330:             19.6.3. Installing highscore files
                    331:             19.6.4. Adding DESTDIR support to packages
                    332:             19.6.5. Packages with hardcoded paths to other interpreters
                    333:             19.6.6. Packages installing perl modules
                    334:             19.6.7. Packages installing info files
                    335:             19.6.8. Packages installing man pages
1.7       rillig    336:             19.6.9. Packages installing GConf data files
1.18      mishka    337:             19.6.10. Packages installing scrollkeeper/rarian data files
1.6       rillig    338:             19.6.11. Packages installing X11 fonts
                    339:             19.6.12. Packages installing GTK2 modules
                    340:             19.6.13. Packages installing SGML or XML data
                    341:             19.6.14. Packages installing extensions to the MIME database
                    342:             19.6.15. Packages using intltool
                    343:             19.6.16. Packages installing startup scripts
                    344:             19.6.17. Packages installing TeX modules
                    345:             19.6.18. Packages supporting running binaries in emulation
                    346:             19.6.19. Packages installing hicolor theme icons
                    347:             19.6.20. Packages installing desktop files
                    348: 
                    349:         19.7. Marking packages as having problems
                    350: 
                    351:     20. Debugging
                    352:     21. Submitting and Committing
                    353: 
                    354:         21.1. Submitting binary packages
                    355:         21.2. Submitting source packages (for non-NetBSD-developers)
                    356:         21.3. General notes when adding, updating, or removing packages
1.34      wiz       357:         21.4. Committing: Adding a package to CVS
1.6       rillig    358:         21.5. Updating a package to a newer version
1.21      snj       359:         21.6. Renaming a package in pkgsrc
                    360:         21.7. Moving a package in pkgsrc
1.6       rillig    361: 
                    362:     22. Frequently Asked Questions
                    363:     23. GNOME packaging and porting
                    364: 
                    365:         23.1. Meta packages
                    366:         23.2. Packaging a GNOME application
                    367:         23.3. Updating GNOME to a newer version
                    368:         23.4. Patching guidelines
1.1       dsieger   369: 
                    370: III. The pkgsrc infrastructure internals
                    371: 
1.6       rillig    372:     24. Design of the pkgsrc infrastructure
1.1       dsieger   373: 
1.6       rillig    374:         24.1. The meaning of variable definitions
                    375:         24.2. Avoiding problems before they arise
                    376:         24.3. Variable evaluation
1.1       dsieger   377: 
1.6       rillig    378:             24.3.1. At load time
                    379:             24.3.2. At runtime
1.1       dsieger   380: 
1.6       rillig    381:         24.4. How can variables be specified?
                    382:         24.5. Designing interfaces for Makefile fragments
1.1       dsieger   383: 
1.6       rillig    384:             24.5.1. Procedures with parameters
                    385:             24.5.2. Actions taken on behalf of parameters
1.1       dsieger   386: 
1.6       rillig    387:         24.6. The order in which files are loaded
1.1       dsieger   388: 
1.6       rillig    389:             24.6.1. The order in bsd.prefs.mk
                    390:             24.6.2. The order in bsd.pkg.mk
1.1       dsieger   391: 
1.6       rillig    392:     25. Regression tests
1.1       dsieger   393: 
1.108     rillig    394:         25.1. Running the regression tests
                    395:         25.2. Adding a new regression test
1.1       dsieger   396: 
1.108     rillig    397:             25.2.1. Overridable functions
                    398:             25.2.2. Helper functions
1.1       dsieger   399: 
1.6       rillig    400:     26. Porting pkgsrc
1.1       dsieger   401: 
1.6       rillig    402:         26.1. Porting pkgsrc to a new operating system
1.1       dsieger   403: 
                    404: A. A simple example package: bison
                    405: 
                    406:     A.1. files
                    407: 
                    408:         A.1.1. Makefile
                    409:         A.1.2. DESCR
                    410:         A.1.3. PLIST
                    411:         A.1.4. Checking a package with pkglint
                    412: 
                    413:     A.2. Steps for building, installing, packaging
                    414: 
                    415: B. Build logs
                    416: 
                    417:     B.1. Building figlet
                    418:     B.2. Packaging figlet
                    419: 
                    420: C. Directory layout of the pkgsrc FTP server
                    421: 
1.23      jakllsch  422:     C.1. distfiles: The distributed source files
                    423:     C.2. misc: Miscellaneous things
                    424:     C.3. packages: Binary packages
                    425:     C.4. reports: Bulk build reports
                    426:     C.5. current, pkgsrc-20xxQy: source packages
1.1       dsieger   427: 
                    428: D. Editing guidelines for the pkgsrc guide
                    429: 
                    430:     D.1. Make targets
                    431:     D.2. Procedure
                    432: 
                    433: List of Tables
                    434: 
                    435: 1.1. Platforms supported by pkgsrc
1.6       rillig    436: 11.1. Patching examples
                    437: 23.1. PLIST handling for GNOME packages
1.1       dsieger   438: 
                    439: Chapter 1. What is pkgsrc?
                    440: 
                    441: Table of Contents
                    442: 
                    443: 1.1. Introduction
                    444: 
                    445:     1.1.1. Why pkgsrc?
                    446:     1.1.2. Supported platforms
                    447: 
                    448: 1.2. Overview
                    449: 1.3. Terminology
                    450: 
                    451:     1.3.1. Roles involved in pkgsrc
                    452: 
                    453: 1.4. Typography
                    454: 
                    455: 1.1. Introduction
                    456: 
                    457: There is a lot of software freely available for Unix-based systems, which is
                    458: usually available in form of the source code. Before such software can be used,
                    459: it needs to be configured to the local system, compiled and installed, and this
                    460: is exactly what The NetBSD Packages Collection (pkgsrc) does. pkgsrc also has
                    461: some basic commands to handle binary packages, so that not every user has to
                    462: build the packages for himself, which is a time-costly task.
                    463: 
                    464: pkgsrc currently contains several thousand packages, including:
                    465: 
1.104     sevan     466:   * www/apache24 - The Apache web server
1.1       dsieger   467: 
                    468:   * www/firefox - The Firefox web browser
                    469: 
                    470:   * meta-pkgs/gnome - The GNOME Desktop Environment
                    471: 
1.102     ryoon     472:   * meta-pkgs/kde4 - The K Desktop Environment
1.1       dsieger   473: 
1.108     rillig    474: ? just to name a few.
1.1       dsieger   475: 
                    476: pkgsrc has built-in support for handling varying dependencies, such as pthreads
                    477: and X11, and extended features such as IPv6 support on a range of platforms.
                    478: 
                    479: 1.1.1. Why pkgsrc?
                    480: 
                    481: pkgsrc provides the following key features:
                    482: 
                    483:   * Easy building of software from source as well as the creation and
                    484:     installation of binary packages. The source and latest patches are
                    485:     retrieved from a master or mirror download site, checksum verified, then
                    486:     built on your system. Support for binary-only distributions is available
                    487:     for both native platforms and NetBSD emulated platforms.
                    488: 
                    489:   * All packages are installed in a consistent directory tree, including
                    490:     binaries, libraries, man pages and other documentation.
                    491: 
1.104     sevan     492:   * Tracking of package dependencies automatically, including when performing
                    493:     updates, to ensure required packages are installed. The configuration files
                    494:     of various packages are handled automatically during updates, so local
                    495:     changes are preserved.
1.1       dsieger   496: 
                    497:   * Like NetBSD, pkgsrc is designed with portability in mind and consists of
                    498:     highly portable code. This allows the greatest speed of development when
1.26      spz       499:     porting to a new platform. This portability also ensures that pkgsrc is 
1.1       dsieger   500:     consistent across all platforms.
                    501: 
                    502:   * The installation prefix, acceptable software licenses, international
                    503:     encryption requirements and build-time options for a large number of
                    504:     packages are all set in a simple, central configuration file.
                    505: 
                    506:   * The entire source (not including the distribution files) is freely
                    507:     available under a BSD license, so you may extend and adapt pkgsrc to your
                    508:     needs. Support for local packages and patches is available right out of the
                    509:     box, so you can configure it specifically for your environment.
                    510: 
                    511: The following principles are basic to pkgsrc:
                    512: 
                    513:   * "It should only work if it's right." ? That means, if a package contains
                    514:     bugs, it's better to find them and to complain about them rather than to
                    515:     just install the package and hope that it works. There are numerous checks
                    516:     in pkgsrc that try to find such bugs: Static analysis tools (pkgtools/
                    517:     pkglint), build-time checks (portability of shell scripts), and
                    518:     post-installation checks (installed files, references to shared libraries,
                    519:     script interpreters).
                    520: 
                    521:   * "If it works, it should work everywhere" ? Like NetBSD has been ported to
                    522:     many hardware architectures, pkgsrc has been ported to many operating
                    523:     systems. Care is taken that packages behave the same on all platforms.
                    524: 
                    525: 1.1.2. Supported platforms
                    526: 
                    527: pkgsrc consists of both a source distribution and a binary distribution for
                    528: these operating systems. After retrieving the required source or binaries, you
                    529: can be up and running with pkgsrc in just minutes!
                    530: 
                    531: pkgsrc was derived from FreeBSD's ports system, and initially developed for
                    532: NetBSD only. Since then, pkgsrc has grown a lot, and now supports the following
                    533: platforms:
                    534: 
                    535: Table 1.1. Platforms supported by pkgsrc
                    536: 
1.92      sevan     537: +-----------------------------------------------------------------------------+
                    538: |               Platform               | Date Support  |        Notes         |
                    539: |                                      |     Added     |                      |
                    540: |--------------------------------------+---------------+----------------------|
                    541: |NetBSD                                |   Aug 1997    |                      |
                    542: |--------------------------------------+---------------+----------------------|
                    543: |Solaris                               |   Mar 1999    |README.Solaris        |
                    544: |--------------------------------------+---------------+----------------------|
                    545: |Linux                                 |   Jun 1999    |README.Linux          |
                    546: |--------------------------------------+---------------+----------------------|
1.118     sevan     547: |Darwin / Mac OS X / OS X / macOS      |   Oct 2001    |README.MacOSX         |
1.92      sevan     548: |--------------------------------------+---------------+----------------------|
                    549: |FreeBSD                               |   Nov 2002    |README.FreeBSD        |
                    550: |--------------------------------------+---------------+----------------------|
                    551: |OpenBSD                               |   Nov 2002    |README.OpenBSD        |
                    552: |--------------------------------------+---------------+----------------------|
                    553: |IRIX                                  |   Dec 2002    |README.IRIX           |
                    554: |                                      |               |README.IRIX5.3        |
                    555: |--------------------------------------+---------------+----------------------|
                    556: |BSD/OS                                |   Dec 2003    |                      |
                    557: |--------------------------------------+---------------+----------------------|
                    558: |AIX                                   |   Dec 2003    |README.AIX            |
                    559: |--------------------------------------+---------------+----------------------|
                    560: |Interix (Microsoft Windows Services   |   Mar 2004    |README.Interix        |
                    561: |for Unix)                             |               |                      |
                    562: |--------------------------------------+---------------+----------------------|
                    563: |DragonFlyBSD                          |   Oct 2004    |                      |
                    564: |--------------------------------------+---------------+----------------------|
                    565: |OSF/1                                 |   Nov 2004    |README.OSF1           |
                    566: |--------------------------------------+---------------+----------------------|
                    567: |HP-UX                                 |   Apr 2007    |README.HPUX           |
                    568: |--------------------------------------+---------------+----------------------|
                    569: |Haiku                                 |   Sep 2010    |README.Haiku          |
                    570: |--------------------------------------+---------------+----------------------|
                    571: |MirBSD                                |   Jan 2011    |                      |
                    572: |--------------------------------------+---------------+----------------------|
                    573: |Minix3                                |   Nov 2011    |README.Minix3         |
                    574: |--------------------------------------+---------------+----------------------|
                    575: |Cygwin                                |   Mar 2013    |README.Cygwin         |
                    576: |--------------------------------------+---------------+----------------------|
                    577: |GNU/kFreeBSD                          |   Jul 2013    |README.GNUkFreeBSD    |
1.104     sevan     578: |--------------------------------------+---------------+----------------------|
                    579: |Bitrig                                |   Jun 2014    |README.Bitrig         |
1.92      sevan     580: +-----------------------------------------------------------------------------+
1.1       dsieger   581: 
                    582: 
                    583: 1.2. Overview
                    584: 
                    585: This document is divided into three parts. The first, The pkgsrc user's guide,
                    586: describes how one can use one of the packages in the Package Collection, either
                    587: by installing a precompiled binary package, or by building one's own copy using
                    588: the NetBSD package system. The second part, The pkgsrc developer's guide,
                    589: explains how to prepare a package so it can be easily built by other NetBSD
                    590: users without knowing about the package's building details. The third part, The
                    591: pkgsrc infrastructure internals is intended for those who want to understand
                    592: how pkgsrc is implemented.
                    593: 
                    594: This document is available in various formats: HTML, PDF, PS, TXT.
                    595: 
                    596: 1.3. Terminology
                    597: 
                    598: There has been a lot of talk about "ports", "packages", etc. so far. Here is a
                    599: description of all the terminology used within this document.
                    600: 
                    601: Package
                    602: 
                    603:     A set of files and building instructions that describe what's necessary to
                    604:     build a certain piece of software using pkgsrc. Packages are traditionally
1.123     wiz       605:     stored under /usr/pkgsrc, but may be stored in any location, referred to as
                    606:     PKGSRCDIR.
1.1       dsieger   607: 
                    608: The NetBSD package system
                    609: 
                    610:     This is the former name of "pkgsrc". It is part of the NetBSD operating
                    611:     system and can be bootstrapped to run on non-NetBSD operating systems as
                    612:     well. It handles building (compiling), installing, and removing of
                    613:     packages.
                    614: 
                    615: Distfile
                    616: 
                    617:     This term describes the file or files that are provided by the author of
                    618:     the piece of software to distribute his work. All the changes necessary to
                    619:     build on NetBSD are reflected in the corresponding package. Usually the
                    620:     distfile is in the form of a compressed tar-archive, but other types are
                    621:     possible, too. Distfiles are usually stored below /usr/pkgsrc/distfiles.
                    622: 
                    623: Port
                    624: 
                    625:     This is the term used by FreeBSD and OpenBSD people for what we call a
                    626:     package. In NetBSD terminology, "port" refers to a different architecture.
                    627: 
                    628: Precompiled/binary package
                    629: 
                    630:     A set of binaries built with pkgsrc from a distfile and stuffed together in
                    631:     a single .tgz file so it can be installed on machines of the same machine
                    632:     architecture without the need to recompile. Packages are usually generated
                    633:     in /usr/pkgsrc/packages; there is also an archive on ftp.NetBSD.org.
                    634: 
                    635:     Sometimes, this is referred to by the term "package" too, especially in the
                    636:     context of precompiled packages.
                    637: 
                    638: Program
                    639: 
                    640:     The piece of software to be installed which will be constructed from all
                    641:     the files in the distfile by the actions defined in the corresponding
                    642:     package.
                    643: 
                    644: 1.3.1. Roles involved in pkgsrc
                    645: 
                    646: pkgsrc users
                    647: 
                    648:     The pkgsrc users are people who use the packages provided by pkgsrc.
                    649:     Typically they are system administrators. The people using the software
                    650:     that is inside the packages (maybe called "end users") are not covered by
                    651:     the pkgsrc guide.
                    652: 
                    653:     There are two kinds of pkgsrc users: Some only want to install pre-built
                    654:     binary packages. Others build the pkgsrc packages from source, either for
                    655:     installing them directly or for building binary packages themselves. For
                    656:     pkgsrc users Part I, "The pkgsrc user's guide" should provide all necessary
                    657:     documentation.
                    658: 
                    659: package maintainers
                    660: 
                    661:     A package maintainer creates packages as described in Part II, "The pkgsrc
                    662:     developer's guide".
                    663: 
                    664: infrastructure developers
                    665: 
                    666:     These people are involved in all those files that live in the mk/ directory
                    667:     and below. Only these people should need to read through Part III, "The
                    668:     pkgsrc infrastructure internals", though others might be curious, too.
                    669: 
                    670: 1.4. Typography
                    671: 
                    672: When giving examples for commands, shell prompts are used to show if the
                    673: command should/can be issued as root, or if "normal" user privileges are
1.115     sevan     674: sufficient. We use a # for root's shell prompt, a % for users' shell prompt,
                    675: assuming they use the C-shell or tcsh and a $ for bourne shell and derivatives.
1.1       dsieger   676: 
                    677: Part I. The pkgsrc user's guide
                    678: 
                    679: Table of Contents
                    680: 
                    681: 2. Where to get pkgsrc and how to keep it up-to-date
                    682: 
                    683:     2.1. Getting pkgsrc for the first time
                    684: 
1.52      asau      685:         2.1.1. As tar archive
1.24      wiz       686:         2.1.2. Via anonymous CVS
1.1       dsieger   687: 
                    688:     2.2. Keeping pkgsrc up-to-date
                    689: 
                    690:         2.2.1. Via tar files
                    691:         2.2.2. Via CVS
                    692: 
                    693: 3. Using pkgsrc on systems other than NetBSD
                    694: 
                    695:     3.1. Binary distribution
                    696:     3.2. Bootstrapping pkgsrc
                    697: 
                    698: 4. Using pkgsrc
                    699: 
                    700:     4.1. Using binary packages
                    701: 
                    702:         4.1.1. Finding binary packages
                    703:         4.1.2. Installing binary packages
                    704:         4.1.3. Deinstalling packages
                    705:         4.1.4. Getting information about installed packages
                    706:         4.1.5. Checking for security vulnerabilities in installed packages
                    707:         4.1.6. Finding if newer versions of your installed packages are in
                    708:             pkgsrc
                    709:         4.1.7. Other administrative functions
                    710: 
                    711:     4.2. Building packages from source
                    712: 
                    713:         4.2.1. Requirements
                    714:         4.2.2. Fetching distfiles
                    715:         4.2.3. How to build and install
                    716: 
                    717: 5. Configuring pkgsrc
                    718: 
                    719:     5.1. General configuration
                    720:     5.2. Variables affecting the build process
1.9       rillig    721:     5.3. Variables affecting the installation process
1.4       rillig    722:     5.4. Selecting and configuring the compiler
1.1       dsieger   723: 
1.4       rillig    724:         5.4.1. Selecting the compiler
                    725:         5.4.2. Additional flags to the compiler (CFLAGS)
                    726:         5.4.3. Additional flags to the linker (LDFLAGS)
1.1       dsieger   727: 
1.4       rillig    728:     5.5. Developer/advanced settings
                    729:     5.6. Selecting Build Options
1.1       dsieger   730: 
                    731: 6. Creating binary packages
                    732: 
                    733:     6.1. Building a single binary package
                    734:     6.2. Settings for creation of binary packages
                    735: 
1.6       rillig    736: 7. Creating binary packages for everything in pkgsrc (bulk builds)
                    737: 
1.71      wiz       738:     7.1. Preparations
                    739:     7.2. Running a pbulk-style bulk build
1.6       rillig    740: 
1.71      wiz       741:         7.2.1. Configuration
1.6       rillig    742: 
1.71      wiz       743:     7.3. Requirements of a full bulk build
1.66      asau      744:     7.4. Creating a multiple CD-ROM packages collection
1.6       rillig    745: 
1.66      asau      746:         7.4.1. Example of cdpack
1.6       rillig    747: 
                    748: 8. Directory layout of the installed files
                    749: 
                    750:     8.1. File system layout in ${LOCALBASE}
                    751:     8.2. File system layout in ${VARBASE}
                    752: 
                    753: 9. Frequently Asked Questions
                    754: 
                    755:     9.1. Are there any mailing lists for pkg-related discussion?
1.84      wiz       756:     9.2. Utilities for package management (pkgtools)
                    757:     9.3. How to use pkgsrc as non-root
                    758:     9.4. How to resume transfers when fetching distfiles?
                    759:     9.5. How can I install/use modular X.org from pkgsrc?
                    760:     9.6. How to fetch files from behind a firewall
                    761:     9.7. How to fetch files from HTTPS sites
                    762:     9.8. How do I tell make fetch to do passive FTP?
                    763:     9.9. How to fetch all distfiles at once
                    764:     9.10. What does "Don't know how to make /usr/share/tmac/tmac.andoc" mean?
                    765:     9.11. What does "Could not find bsd.own.mk" mean?
                    766:     9.12. Using 'sudo' with pkgsrc
                    767:     9.13. How do I change the location of configuration files?
                    768:     9.14. Automated security checks
                    769:     9.15. Why do some packages ignore my CFLAGS?
                    770:     9.16. A package does not build. What shall I do?
                    771:     9.17. What does "Makefile appears to contain unresolved cvs/rcs/??? merge
1.24      wiz       772:         conflicts" mean?
1.1       dsieger   773: 
                    774: Chapter 2. Where to get pkgsrc and how to keep it up-to-date
                    775: 
                    776: Table of Contents
                    777: 
                    778: 2.1. Getting pkgsrc for the first time
                    779: 
1.52      asau      780:     2.1.1. As tar archive
1.24      wiz       781:     2.1.2. Via anonymous CVS
1.1       dsieger   782: 
                    783: 2.2. Keeping pkgsrc up-to-date
                    784: 
                    785:     2.2.1. Via tar files
                    786:     2.2.2. Via CVS
                    787: 
                    788: Before you download and extract the files, you need to decide where you want to
                    789: extract them. When using pkgsrc as root user, pkgsrc is usually installed in /
                    790: usr/pkgsrc. You are though free to install the sources and binary packages
                    791: wherever you want in your filesystem, provided that the pathname does not
                    792: contain white-space or other characters that are interpreted specially by the
                    793: shell and some other programs. A safe bet is to use only letters, digits,
                    794: underscores and dashes.
                    795: 
                    796: 2.1. Getting pkgsrc for the first time
                    797: 
1.25      wiz       798: Before you download any pkgsrc files, you should decide whether you want the 
1.1       dsieger   799: current branch or the stable branch. The latter is forked on a quarterly basis
                    800: from the current branch and only gets modified for security updates. The names
                    801: of the stable branches are built from the year and the quarter, for example
1.118     sevan     802: 2016Q4.
1.1       dsieger   803: 
                    804: The second step is to decide how you want to download pkgsrc. You can get it as
1.24      wiz       805: a tar file or via CVS. Both ways are described here.
1.1       dsieger   806: 
1.52      asau      807: Note that tar archive contains CVS working copy. Thus you can switch to using
                    808: CVS at any later time.
1.1       dsieger   809: 
1.52      asau      810: 2.1.1. As tar archive
                    811: 
                    812: The primary download location for all pkgsrc files is http://ftp.NetBSD.org/pub
                    813: /pkgsrc/ or ftp://ftp.NetBSD.org/pub/pkgsrc/ (it points to the same location).
                    814: There are a number of subdirectories for different purposes, which are
1.1       dsieger   815: described in detail in Appendix C, Directory layout of the pkgsrc FTP server.
                    816: 
1.52      asau      817: The tar archive for the current branch is in the directory current and is
1.118     sevan     818: called pkgsrc.tar.gz. It is autogenerated weekly.
1.52      asau      819: 
                    820: To save download time we provide bzip2- and xz-compressed archives which are
                    821: published at pkgsrc.tar.bz2 and pkgsrc.tar.xz respectively.
                    822: 
                    823: You can fetch the same files using FTP.
1.1       dsieger   824: 
1.118     sevan     825: The tar file for the stable branch 2016Q4 is in the directory pkgsrc-2016Q4 and
1.59      jnemeth   826: is also called pkgsrc.tar.gz.
1.1       dsieger   827: 
1.12      weinem    828: To download a pkgsrc stable tarball, run:
                    829: 
1.59      jnemeth   830: $ ftp ftp://ftp.NetBSD.org/pub/pkgsrc/pkgsrc-20xxQy/pkgsrc.tar.gz
1.12      weinem    831: 
1.25      wiz       832: Where pkgsrc-20xxQy is the stable branch to be downloaded, for example, "
1.118     sevan     833: pkgsrc-2016Q4".
1.12      weinem    834: 
1.78      snj       835: If you prefer, you can also fetch it using "wget", "curl", or your web browser.
1.52      asau      836: 
1.12      weinem    837: Then, extract it with:
                    838: 
1.78      snj       839: $ tar -xzf pkgsrc.tar.gz -C /usr
1.12      weinem    840: 
                    841: This will create the directory pkgsrc/ in /usr/ and all the package source will
                    842: be stored under /usr/pkgsrc/.
                    843: 
                    844: To download pkgsrc-current, run:
                    845: 
                    846: $ ftp ftp://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc.tar.gz
1.1       dsieger   847: 
1.24      wiz       848: 2.1.2. Via anonymous CVS
1.1       dsieger   849: 
1.24      wiz       850: To fetch a specific pkgsrc stable branch, run:
1.1       dsieger   851: 
1.40      wiz       852: $ cd /usr && cvs -q -z2 -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -r pkgsrc-20xxQy -P pkgsrc
1.1       dsieger   853: 
1.25      wiz       854: Where pkgsrc-20xxQy is the stable branch to be checked out, for example, "
1.118     sevan     855: pkgsrc-2016Q4"
1.13      weinem    856: 
1.24      wiz       857: This will create the directory pkgsrc/ in your /usr/ directory and all the
                    858: package source will be stored under /usr/pkgsrc/.
                    859: 
                    860: To fetch the pkgsrc current branch, run:
1.1       dsieger   861: 
1.40      wiz       862: $ cd /usr && cvs -q -z2 -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -P pkgsrc
1.1       dsieger   863: 
1.30      dholland  864: Refer to the list of available mirrors to choose a faster CVS mirror, if
                    865: needed.
1.1       dsieger   866: 
1.24      wiz       867: If you get error messages from rsh, you need to set CVS_RSH variable. E.g.:
1.1       dsieger   868: 
1.40      wiz       869: $ cd /usr && env CVS_RSH=ssh cvs -q -z2 -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -P pkgsrc
1.1       dsieger   870: 
1.24      wiz       871: Refer to documentation on your command shell how to set CVS_RSH=ssh
                    872: permanently. For Bourne shells, you can set it in your .profile or better
                    873: globally in /etc/profile:
                    874: 
                    875: # set CVS remote shell command
                    876: CVS_RSH=ssh
                    877: export CVS_RSH
1.12      weinem    878: 
1.13      weinem    879: By default, CVS doesn't do things like most people would expect it to do. But
                    880: there is a way to convince CVS, by creating a file called .cvsrc in your home
1.12      weinem    881: directory and saving the following lines to it. This file will save you lots of
                    882: headache and some bug reports, so we strongly recommend it. You can find an
                    883: explanation of this file in the CVS documentation.
1.2       rillig    884: 
                    885: # recommended CVS configuration file from the pkgsrc guide
1.40      wiz       886: cvs -q -z2
1.2       rillig    887: checkout -P
1.4       rillig    888: update -dP
                    889: diff -upN
1.2       rillig    890: rdiff -u
1.24      wiz       891: release -d
1.1       dsieger   892: 
                    893: 2.2. Keeping pkgsrc up-to-date
                    894: 
                    895: The preferred way to keep pkgsrc up-to-date is via CVS (which also works if you
                    896: have first installed it via a tar file). It saves bandwidth and hard disk
                    897: activity, compared to downloading the tar file again.
                    898: 
                    899: 2.2.1. Via tar files
                    900: 
                    901: Warning
                    902: 
                    903: When updating from a tar file, you first need to completely remove the old
                    904: pkgsrc directory. Otherwise those files that have been removed from pkgsrc in
                    905: the mean time will not be removed on your local disk, resulting in
                    906: inconsistencies. When removing the old files, any changes that you have done to
                    907: the pkgsrc files will be lost after updating. Therefore updating via CVS is
                    908: strongly recommended.
                    909: 
                    910: Note that by default the distfiles and the binary packages are saved in the
                    911: pkgsrc tree, so don't forget to rescue them before updating. You can also
1.78      snj       912: configure pkgsrc to store distfiles and packages in directories outside the
                    913: pkgsrc tree by setting the DISTDIR and PACKAGES variables. See Chapter 5, 
                    914: Configuring pkgsrc for the details.
1.1       dsieger   915: 
                    916: To update pkgsrc from a tar file, download the tar file as explained above.
                    917: Then, make sure that you have not made any changes to the files in the pkgsrc
                    918: directory. Remove the pkgsrc directory and extract the new tar file. Done.
                    919: 
                    920: 2.2.2. Via CVS
                    921: 
1.26      spz       922: To update pkgsrc via CVS, change to the pkgsrc directory and run cvs:
1.12      weinem    923: 
1.26      spz       924: $ cd /usr/pkgsrc && cvs update -dP
                    925: 
                    926: If you get error messages from rsh, you need to set CVS_RSH variable as
                    927: described above. E.g.:
                    928: 
                    929: $ cd /usr/pkgsrc && env CVS_RSH=ssh cvs up -dP
1.1       dsieger   930: 
                    931: 2.2.2.1. Switching between different pkgsrc branches
                    932: 
                    933: When updating pkgsrc, the CVS program keeps track of the branch you selected.
                    934: But if you, for whatever reason, want to switch from the stable branch to the
                    935: current one, you can do it by adding the option "-A" after the "update"
1.25      wiz       936: keyword. To switch from the current branch back to the stable branch, add the "
1.118     sevan     937: -rpkgsrc-2016Q4" option.
1.1       dsieger   938: 
                    939: 2.2.2.2. What happens to my changes when updating?
                    940: 
                    941: When you update pkgsrc, the CVS program will only touch those files that are
                    942: registered in the CVS repository. That means that any packages that you created
                    943: on your own will stay unmodified. If you change files that are managed by CVS,
                    944: later updates will try to merge your changes with those that have been done by
                    945: others. See the CVS manual, chapter "update" for details.
                    946: 
                    947: Chapter 3. Using pkgsrc on systems other than NetBSD
                    948: 
                    949: Table of Contents
                    950: 
                    951: 3.1. Binary distribution
                    952: 3.2. Bootstrapping pkgsrc
                    953: 
                    954: 3.1. Binary distribution
                    955: 
1.9       rillig    956: See Section 4.1, "Using binary packages".
1.1       dsieger   957: 
                    958: 3.2. Bootstrapping pkgsrc
                    959: 
1.44      asau      960: pkgsrc can be bootstrapped for use in two different modes: privileged and
                    961: unprivileged one. In unprivileged mode in contrast to privileged one all
1.45      asau      962: programs are installed under one particular user and cannot utilise privileged
1.44      asau      963: operations (packages don't create special users and all special file
                    964: permissions like setuid are ignored).
                    965: 
1.1       dsieger   966: Installing the bootstrap kit from source should be as simple as:
                    967: 
1.60      asau      968: # env CVS_RSH=ssh cvs -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -P pkgsrc
1.1       dsieger   969: # cd pkgsrc/bootstrap
                    970: # ./bootstrap
                    971: 
                    972: 
1.44      asau      973: To bootstrap in unprivileged mode pass "--unprivileged" flag to bootstrap
                    974: 
                    975: By default, in privileged mode pkgsrc uses /usr/pkg for prefix where programs
1.118     sevan     976: will be installed in, and /usr/pkg/pkgdb for the package database directory
                    977: where pkgsrc will do its internal bookkeeping, /var is used as varbase, where
1.44      asau      978: packages install their persistent data. In unprivileged mode pkgsrc uses ~/pkg
1.118     sevan     979: for prefix, ~/pkg/pkgdb for the package database, and ~/pkg/var for varbase.
1.44      asau      980: 
                    981: You can change default layout using command-line arguments. Run "./bootstrap
                    982: --help" to get details.
1.1       dsieger   983: 
                    984: Note
                    985: 
                    986: The bootstrap installs a bmake tool. Use this bmake when building via pkgsrc.
                    987: For examples in this guide, use bmake instead of "make".
                    988: 
1.44      asau      989: Note
                    990: 
                    991: It is possible to bootstrap multiple instances of pkgsrc using non-intersecting
                    992: directories. Use bmake corresponding to the installation you're working with to
                    993: build and install packages.
                    994: 
1.1       dsieger   995: Chapter 4. Using pkgsrc
                    996: 
                    997: Table of Contents
                    998: 
                    999: 4.1. Using binary packages
                   1000: 
                   1001:     4.1.1. Finding binary packages
                   1002:     4.1.2. Installing binary packages
                   1003:     4.1.3. Deinstalling packages
                   1004:     4.1.4. Getting information about installed packages
                   1005:     4.1.5. Checking for security vulnerabilities in installed packages
                   1006:     4.1.6. Finding if newer versions of your installed packages are in pkgsrc
                   1007:     4.1.7. Other administrative functions
                   1008: 
                   1009: 4.2. Building packages from source
                   1010: 
                   1011:     4.2.1. Requirements
                   1012:     4.2.2. Fetching distfiles
                   1013:     4.2.3. How to build and install
                   1014: 
                   1015: Basically, there are two ways of using pkgsrc. The first is to only install the
                   1016: package tools and to use binary packages that someone else has prepared. This
                   1017: is the "pkg" in pkgsrc. The second way is to install the "src" of pkgsrc, too.
                   1018: Then you are able to build your own packages, and you can still use binary
                   1019: packages from someone else.
                   1020: 
                   1021: 4.1. Using binary packages
                   1022: 
1.9       rillig   1023: On the ftp.NetBSD.org server and its mirrors, there are collections of binary
                   1024: packages, ready to be installed. These binary packages have been built using
                   1025: the default settings for the directories, that is:
                   1026: 
                   1027:   * /usr/pkg for LOCALBASE, where most of the files are installed,
                   1028: 
                   1029:   * /usr/pkg/etc for configuration files,
                   1030: 
                   1031:   * /var for VARBASE, where those files are installed that may change after
                   1032:     installation.
                   1033: 
                   1034: If you cannot use these directories for whatever reasons (maybe because you're
                   1035: not root), you cannot use these binary packages, but have to build the packages
                   1036: yourself, which is explained in Section 3.2, "Bootstrapping pkgsrc".
1.1       dsieger  1037: 
                   1038: 4.1.1. Finding binary packages
                   1039: 
1.5       weinem   1040: To install binary packages, you first need to know from where to get them. The
                   1041: first place where you should look is on the main pkgsrc FTP server in the
                   1042: directory /pub/pkgsrc/packages.
                   1043: 
                   1044: This directory contains binary packages for multiple platforms. First, select
                   1045: your operating system. (Ignore the directories with version numbers attached to
                   1046: it, they just exist for legacy reasons.) Then, select your hardware
                   1047: architecture, and in the third step, the OS version and the "version" of
1.9       rillig   1048: pkgsrc.
                   1049: 
                   1050: In this directory, you often find a file called bootstrap.tar.gz which contains
                   1051: the package management tools. If the file is missing, it is likely that your
                   1052: operating system already provides those tools. Download the file and extract it
                   1053: in the / directory. It will create the directories /usr/pkg (containing the
1.118     sevan    1054: tools for managing binary packages and the database of installed packages).
1.1       dsieger  1055: 
                   1056: 4.1.2. Installing binary packages
                   1057: 
1.85      wiz      1058: In the directory from the last section, there is a subdirectory called All/,
1.9       rillig   1059: which contains all the binary packages that are available for the platform,
                   1060: excluding those that may not be distributed via FTP or CDROM (depending on
1.24      wiz      1061: which medium you are using).
1.9       rillig   1062: 
                   1063: To install packages directly from an FTP or HTTP server, run the following
                   1064: commands in a Bourne-compatible shell (be sure to su to root first):
                   1065: 
                   1066: # PATH="/usr/pkg/sbin:$PATH"
1.85      wiz      1067: # PKG_PATH="ftp://ftp.NetBSD.org/pub/pkgsrc/packages/OPSYS/ARCH/VERSIONS/All/"
1.9       rillig   1068: # export PATH PKG_PATH
                   1069: 
                   1070: Instead of URLs, you can also use local paths, for example if you are
                   1071: installing from a set of CDROMs, DVDs or an NFS-mounted repository. If you want
                   1072: to install packages from multiple sources, you can separate them by a semicolon
                   1073: in PKG_PATH.
                   1074: 
                   1075: After these preparations, installing a package is very easy:
                   1076: 
1.118     sevan    1077: # pkg_add libreoffice
1.9       rillig   1078: # pkg_add kde-3.5.7
1.118     sevan    1079: # pkg_add ap24-php71-*
1.1       dsieger  1080: 
                   1081: Note that any prerequisite packages needed to run the package in question will
                   1082: be installed, too, assuming they are present where you install from.
                   1083: 
1.25      wiz      1084: Adding packages might install vulnerable packages. Thus you should run 
1.24      wiz      1085: pkg_admin audit regularly, especially after installing new packages, and verify
                   1086: that the vulnerabilities are acceptable for your configuration.
1.1       dsieger  1087: 
                   1088: After you've installed packages, be sure to have /usr/pkg/bin and /usr/pkg/sbin
                   1089: in your PATH so you can actually start the just installed program.
                   1090: 
                   1091: 4.1.3. Deinstalling packages
                   1092: 
                   1093: To deinstall a package, it does not matter whether it was installed from source
                   1094: code or from a binary package. The pkg_delete command does not know it anyway.
                   1095: To delete a package, you can just run pkg_delete package-name. The package name
                   1096: can be given with or without version number. Wildcards can also be used to
                   1097: deinstall a set of packages, for example *emacs*. Be sure to include them in
                   1098: quotes, so that the shell does not expand them before pkg_delete sees them.
                   1099: 
                   1100: The -r option is very powerful: it removes all the packages that require the
                   1101: package in question and then removes the package itself. For example:
                   1102: 
                   1103: # pkg_delete -r jpeg
                   1104: 
                   1105: 
                   1106: will remove jpeg and all the packages that used it; this allows upgrading the
                   1107: jpeg package.
                   1108: 
                   1109: 4.1.4. Getting information about installed packages
                   1110: 
                   1111: The pkg_info shows information about installed packages or binary package
                   1112: files.
                   1113: 
                   1114: 4.1.5. Checking for security vulnerabilities in installed packages
                   1115: 
                   1116: The NetBSD Security-Officer and Packages Groups maintain a list of known
                   1117: security vulnerabilities to packages which are (or have been) included in
                   1118: pkgsrc. The list is available from the NetBSD FTP site at ftp://ftp.NetBSD.org/
                   1119: pub/pkgsrc/distfiles/vulnerabilities.
                   1120: 
1.23      jakllsch 1121: Through pkg_admin fetch-pkg-vulnerabilities, this list can be downloaded
                   1122: automatically, and a security audit of all packages installed on a system can
                   1123: take place.
                   1124: 
                   1125: There are two components to auditing. The first step, pkg_admin
                   1126: fetch-pkg-vulnerabilities, is for downloading the list of vulnerabilities from
                   1127: the NetBSD FTP site. The second step, pkg_admin audit, checks to see if any of
                   1128: your installed packages are vulnerable. If a package is vulnerable, you will
                   1129: see output similar to the following:
1.1       dsieger  1130: 
                   1131: Package samba-2.0.9 has a local-root-shell vulnerability, see
                   1132:     http://www.samba.org/samba/whatsnew/macroexploit.html
                   1133: 
1.23      jakllsch 1134: You may wish to have the vulnerabilities file downloaded daily so that it
                   1135: remains current. This may be done by adding an appropriate entry to the root
                   1136: users crontab(5) entry. For example the entry
                   1137: 
1.121     sevan    1138: # Download vulnerabilities file
1.118     sevan    1139: 0 3 * * * /usr/pkg/sbin/pkg_admin fetch-pkg-vulnerabilities >/dev/null 2>&1
1.121     sevan    1140: # Audit the installed packages and email results to root
                   1141: 9 3 * * * /usr/pkg/sbin/pkg_admin audit |mail -s "Installed package audit result" \
                   1142:             root >/dev/null 2>&1
1.118     sevan    1143: 
                   1144: 
                   1145: will update the vulnerability list every day at 3AM, followed by an audit at
                   1146: 3:09AM. The result of the audit are then emailed to root. On NetBSD this may be
                   1147: accomplished instead by adding the following line to /etc/daily.conf:
                   1148: 
                   1149: fetch_pkg_vulnerabilities=YES
                   1150: 
1.23      jakllsch 1151: 
1.118     sevan    1152: to fetch the vulnerability list from the daily security script. The system is
                   1153: set to audit the packages by default but can be set explicitly, if desired (not
1.123     wiz      1154: required), by adding the following line to /etc/security.conf:
1.23      jakllsch 1155: 
1.118     sevan    1156: check_pkg_vulnerabilities=YES
1.23      jakllsch 1157: 
                   1158: 
1.118     sevan    1159: see daily.conf(5) and security.conf(5) for more details.
1.1       dsieger  1160: 
                   1161: 4.1.6. Finding if newer versions of your installed packages are in pkgsrc
                   1162: 
1.12      weinem   1163: Install pkgtools/lintpkgsrc and run lintpkgsrc with the "-i" argument to check
                   1164: if your packages are up-to-date, e.g.
1.1       dsieger  1165: 
                   1166: % lintpkgsrc -i
                   1167: ...
                   1168: Version mismatch: 'tcsh' 6.09.00 vs 6.10.00
                   1169: 
                   1170: 
                   1171: You can then use make update to update the package on your system and rebuild
                   1172: any dependencies.
                   1173: 
                   1174: 4.1.7. Other administrative functions
                   1175: 
                   1176: The pkg_admin executes various administrative functions on the package system.
                   1177: 
                   1178: 4.2. Building packages from source
                   1179: 
                   1180: After obtaining pkgsrc, the pkgsrc directory now contains a set of packages,
1.25      wiz      1181: organized into categories. You can browse the online index of packages, or run 
1.1       dsieger  1182: make readme from the pkgsrc directory to build local README.html files for all
                   1183: packages, viewable with any web browser such as www/lynx or www/firefox.
                   1184: 
                   1185: The default prefix for installed packages is /usr/pkg. If you wish to change
                   1186: this, you should do so by setting LOCALBASE in mk.conf. You should not try to
                   1187: use multiple different LOCALBASE definitions on the same system (inside a
                   1188: chroot is an exception).
                   1189: 
                   1190: The rest of this chapter assumes that the package is already in pkgsrc. If it
                   1191: is not, see Part II, "The pkgsrc developer's guide" for instructions how to
                   1192: create your own packages.
                   1193: 
                   1194: 4.2.1. Requirements
                   1195: 
                   1196: To build packages from source, you need a working C compiler. On NetBSD, you
                   1197: need to install the "comp" and the "text" distribution sets. If you want to
                   1198: build X11-related packages, the "xbase" and "xcomp" distribution sets are
                   1199: required, too.
                   1200: 
                   1201: 4.2.2. Fetching distfiles
                   1202: 
                   1203: The first step for building a package is downloading the distfiles (i.e. the
                   1204: unmodified source). If they have not yet been downloaded, pkgsrc will fetch
                   1205: them automatically.
                   1206: 
                   1207: If you have all files that you need in the distfiles directory, you don't need
                   1208: to connect. If the distfiles are on CD-ROM, you can mount the CD-ROM on /cdrom
                   1209: and add:
                   1210: 
                   1211: DISTDIR=/cdrom/pkgsrc/distfiles
                   1212: 
                   1213: to your mk.conf.
                   1214: 
                   1215: By default a list of distribution sites will be randomly intermixed to prevent
                   1216: huge load on servers which holding popular packages (for example,
                   1217: SourceForge.net mirrors). Thus, every time when you need to fetch yet another
                   1218: distfile all the mirrors will be tried in new (random) order. You can turn this
                   1219: feature off by setting MASTER_SORT_RANDOM=NO (for PKG_DEVELOPERs it's already
                   1220: disabled).
                   1221: 
                   1222: You can overwrite some of the major distribution sites to fit to sites that are
                   1223: close to your own. By setting one or two variables you can modify the order in
                   1224: which the master sites are accessed. MASTER_SORT contains a whitespace
                   1225: delimited list of domain suffixes. MASTER_SORT_REGEX is even more flexible, it
                   1226: contains a whitespace delimited list of regular expressions. It has higher
                   1227: priority than MASTER_SORT. Have a look at pkgsrc/mk/defaults/mk.conf to find
                   1228: some examples. This may save some of your bandwidth and time.
                   1229: 
                   1230: You can change these settings either in your shell's environment, or, if you
1.4       rillig   1231: want to keep the settings, by editing the mk.conf file, and adding the
1.1       dsieger  1232: definitions there.
                   1233: 
                   1234: If a package depends on many other packages (such as meta-pkgs/kde3), the build
                   1235: process may alternate between periods of downloading source, and compiling. To
                   1236: ensure you have all the source downloaded initially you can run the command:
                   1237: 
                   1238: % make fetch-list | sh
                   1239: 
                   1240: which will output and run a set of shell commands to fetch the necessary files
                   1241: into the distfiles directory. You can also choose to download the files
                   1242: manually.
                   1243: 
                   1244: 4.2.3. How to build and install
                   1245: 
                   1246: Once the software has downloaded, any patches will be applied, then it will be
                   1247: compiled for you. This may take some time depending on your computer, and how
                   1248: many other packages the software depends on and their compile time.
                   1249: 
                   1250: Note
                   1251: 
                   1252: If using bootstrap or pkgsrc on a non-NetBSD system, use the pkgsrc bmake
                   1253: command instead of "make" in the examples in this guide.
                   1254: 
                   1255: For example, type
                   1256: 
                   1257: % cd misc/figlet
                   1258: % make
                   1259: 
                   1260: 
                   1261: at the shell prompt to build the various components of the package.
                   1262: 
                   1263: The next stage is to actually install the newly compiled program onto your
                   1264: system. Do this by entering:
                   1265: 
                   1266: % make install
                   1267: 
                   1268: 
                   1269: while you are still in the directory for whatever package you are installing.
                   1270: 
                   1271: Installing the package on your system may require you to be root. However,
                   1272: pkgsrc has a just-in-time-su feature, which allows you to only become root for
                   1273: the actual installation step.
                   1274: 
                   1275: That's it, the software should now be installed and setup for use. You can now
                   1276: enter:
                   1277: 
                   1278: % make clean
                   1279: 
                   1280: 
                   1281: to remove the compiled files in the work directory, as you shouldn't need them
                   1282: any more. If other packages were also added to your system (dependencies) to
                   1283: allow your program to compile, you can tidy these up also with the command:
                   1284: 
                   1285: % make clean-depends
                   1286: 
                   1287: 
                   1288: Taking the figlet utility as an example, we can install it on our system by
                   1289: building as shown in Appendix B, Build logs.
                   1290: 
                   1291: The program is installed under the default root of the packages tree - /usr/
                   1292: pkg. Should this not conform to your tastes, set the LOCALBASE variable in your
                   1293: environment, and it will use that value as the root of your packages tree. So,
                   1294: to use /usr/local, set LOCALBASE=/usr/local in your environment. Please note
                   1295: that you should use a directory which is dedicated to packages and not shared
                   1296: with other programs (i.e., do not try and use LOCALBASE=/usr). Also, you should
                   1297: not try to add any of your own files or directories (such as src/, obj/, or
                   1298: pkgsrc/) below the LOCALBASE tree. This is to prevent possible conflicts
                   1299: between programs and other files installed by the package system and whatever
                   1300: else may have been installed there.
                   1301: 
1.4       rillig   1302: Some packages look in mk.conf to alter some configuration options at build
1.1       dsieger  1303: time. Have a look at pkgsrc/mk/defaults/mk.conf to get an overview of what will
                   1304: be set there by default. Environment variables such as LOCALBASE can be set in
1.4       rillig   1305: mk.conf to save having to remember to set them each time you want to use
1.1       dsieger  1306: pkgsrc.
                   1307: 
                   1308: Occasionally, people want to "look under the covers" to see what is going on
                   1309: when a package is building or being installed. This may be for debugging
                   1310: purposes, or out of simple curiosity. A number of utility values have been
                   1311: added to help with this.
                   1312: 
                   1313:  1. If you invoke the make(1) command with PKG_DEBUG_LEVEL=2, then a huge
                   1314:     amount of information will be displayed. For example,
                   1315: 
                   1316:     make patch PKG_DEBUG_LEVEL=2
                   1317: 
1.25      wiz      1318:     will show all the commands that are invoked, up to and including the "patch
                   1319:     " stage.
1.1       dsieger  1320: 
                   1321:  2. If you want to know the value of a certain make(1) definition, then the
                   1322:     VARNAME definition should be used, in conjunction with the show-var target.
                   1323:     e.g. to show the expansion of the make(1) variable LOCALBASE:
                   1324: 
                   1325:     % make show-var VARNAME=LOCALBASE
                   1326:     /usr/pkg
                   1327:     %
                   1328: 
                   1329: 
                   1330: If you want to install a binary package that you've either created yourself
                   1331: (see next section), that you put into pkgsrc/packages manually or that is
                   1332: located on a remote FTP server, you can use the "bin-install" target. This
                   1333: target will install a binary package - if available - via pkg_add(1), else do a
                   1334: make package. The list of remote FTP sites searched is kept in the variable
                   1335: BINPKG_SITES, which defaults to ftp.NetBSD.org. Any flags that should be added
                   1336: to pkg_add(1) can be put into BIN_INSTALL_FLAGS. See pkgsrc/mk/defaults/mk.conf
                   1337: for more details.
                   1338: 
                   1339: A final word of warning: If you set up a system that has a non-standard setting
                   1340: for LOCALBASE, be sure to set that before any packages are installed, as you
                   1341: cannot use several directories for the same purpose. Doing so will result in
                   1342: pkgsrc not being able to properly detect your installed packages, and fail
                   1343: miserably. Note also that precompiled binary packages are usually built with
                   1344: the default LOCALBASE of /usr/pkg, and that you should not install any if you
                   1345: use a non-standard LOCALBASE.
                   1346: 
                   1347: Chapter 5. Configuring pkgsrc
                   1348: 
                   1349: Table of Contents
                   1350: 
                   1351: 5.1. General configuration
                   1352: 5.2. Variables affecting the build process
1.9       rillig   1353: 5.3. Variables affecting the installation process
1.4       rillig   1354: 5.4. Selecting and configuring the compiler
1.1       dsieger  1355: 
1.4       rillig   1356:     5.4.1. Selecting the compiler
                   1357:     5.4.2. Additional flags to the compiler (CFLAGS)
                   1358:     5.4.3. Additional flags to the linker (LDFLAGS)
1.1       dsieger  1359: 
1.4       rillig   1360: 5.5. Developer/advanced settings
                   1361: 5.6. Selecting Build Options
1.1       dsieger  1362: 
                   1363: The whole pkgsrc system is configured in a single file, usually called mk.conf.
                   1364: In which directory pkgsrc looks for that file depends on the installation. On
                   1365: NetBSD, when you use make(1) from the base system, it is in the directory /etc
                   1366: /. In all other cases the default location is ${PREFIX}/etc/, depending on
                   1367: where you told the bootstrap program to install the binary packages.
                   1368: 
                   1369: The format of the configuration file is that of the usual BSD-style Makefiles.
                   1370: The whole pkgsrc configuration is done by setting variables in this file. Note
                   1371: that you can define all kinds of variables, and no special error checking (for
1.112     rillig   1372: example for spelling mistakes) takes place.
1.1       dsieger  1373: 
                   1374: 5.1. General configuration
                   1375: 
1.112     rillig   1376: The following variables apply to all pkgsrc packages. A complete list of the
                   1377: variables that can be configured by the user is available in mk/defaults/
                   1378: mk.conf, together with some comments that describe each variable's intent.
1.1       dsieger  1379: 
                   1380:   * LOCALBASE: Where packages will be installed. The default is /usr/pkg. Do
                   1381:     not mix binary packages with different LOCALBASEs!
                   1382: 
                   1383:   * CROSSBASE: Where "cross" category packages will be installed. The default
                   1384:     is ${LOCALBASE}/cross.
                   1385: 
1.84      wiz      1386:   * X11BASE: Where X11 is installed on the system. The default is /usr/X11R7.
1.1       dsieger  1387: 
                   1388:   * DISTDIR: Where to store the downloaded copies of the original source
                   1389:     distributions used for building pkgsrc packages. The default is $
                   1390:     {PKGSRCDIR}/distfiles.
                   1391: 
                   1392:   * PKG_DBDIR: Where the database about installed packages is stored. The
1.118     sevan    1393:     default is /usr/pkg/pkgdb.
1.1       dsieger  1394: 
                   1395:   * MASTER_SITE_OVERRIDE: If set, override the packages' MASTER_SITES with this
                   1396:     value.
                   1397: 
                   1398:   * MASTER_SITE_BACKUP: Backup location(s) for distribution files and patch
                   1399:     files if not found locally or in ${MASTER_SITES} or ${PATCH_SITES}
1.118     sevan    1400:     respectively. The defaults is ftp://ftp.NetBSD.org/pub/pkgsrc/distfiles/$
1.1       dsieger  1401:     {DIST_SUBDIR}/.
                   1402: 
                   1403:   * BINPKG_SITES: List of sites carrying binary pkgs. rel and arch are replaced
                   1404:     with OS release ("2.0", etc.) and architecture ("mipsel", etc.).
                   1405: 
1.23      jakllsch 1406:   * ACCEPTABLE_LICENSES: List of acceptable licenses. License names are
                   1407:     case-sensitive. Whenever you try to build a package whose license is not in
                   1408:     this list, you will get an error message. If the license condition is
                   1409:     simple enough, the error message will include specific instructions on how
                   1410:     to change this variable.
1.1       dsieger  1411: 
                   1412: 5.2. Variables affecting the build process
                   1413: 
                   1414:   * PACKAGES: The top level directory for the binary packages. The default is $
                   1415:     {PKGSRCDIR}/packages.
                   1416: 
                   1417:   * WRKOBJDIR: The top level directory where, if defined, the separate working
                   1418:     directories will get created, and symbolically linked to from ${WRKDIR}
                   1419:     (see below). This is useful for building packages on several architectures,
                   1420:     then ${PKGSRCDIR} can be NFS-mounted while ${WRKOBJDIR} is local to every
                   1421:     architecture. (It should be noted that PKGSRCDIR should not be set by the
                   1422:     user ? it is an internal definition which refers to the root of the pkgsrc
                   1423:     tree. It is possible to have many pkgsrc tree instances.)
                   1424: 
                   1425:   * LOCALPATCHES: Directory for local patches that aren't part of pkgsrc. See
1.6       rillig   1426:     Section 11.3, "patches/*" for more information.
1.1       dsieger  1427: 
                   1428:   * PKGMAKECONF: Location of the mk.conf file used by a package's BSD-style
                   1429:     Makefile. If this is not set, MAKECONF is set to /dev/null to avoid picking
                   1430:     up settings used by builds in /usr/src.
                   1431: 
                   1432:   * DEPENDS_TARGET: By default, dependencies are only installed, and no binary
1.66      asau     1433:     package is created for them. You can set this variable to package-install
                   1434:     to automatically create binary packages after installing dependencies.
1.84      wiz      1435:     Please note that the PKGSRC_KEEP_BIN_PKGS can be set to yes to preserve
1.80      wiz      1436:     binary packages when using the install as well.
1.1       dsieger  1437: 
1.9       rillig   1438: 5.3. Variables affecting the installation process
1.1       dsieger  1439: 
1.107     jnemeth  1440: Packages have to support installation into a subdirectory of WRKDIR. This
                   1441: allows a package to be built, before the actual filesystem is touched. DESTDIR
                   1442: support exists in two variations:
1.4       rillig   1443: 
                   1444:   * Basic DESTDIR support means that the package installation and packaging is
                   1445:     still run as root.
                   1446: 
                   1447:   * Full DESTDIR support can run the complete build, installation and packaging
                   1448:     as normal user. Root privileges are only needed to add packages.
                   1449: 
                   1450: With basic DESTDIR support, make clean needs to be run as root.
                   1451: 
1.17      imil     1452: Considering the foo/bar package, DESTDIR full support can be tested using the
                   1453: following commands
                   1454: 
                   1455: $ id
                   1456: uid=1000(myusername) gid=100(users) groups=100(users),0(wheel)
                   1457: $ mkdir $HOME/packages
                   1458: $ cd $PKGSRCDIR/foo/bar
                   1459: 
                   1460: Verify DESTDIR full support, no root privileges should be needed
                   1461: 
1.66      asau     1462: $ make stage-install
1.17      imil     1463: 
                   1464: Create a package without root privileges
                   1465: 
1.66      asau     1466: $ make PACKAGES=$HOME/packages package
1.17      imil     1467: 
                   1468: For the following command, you must be able to gain root privileges using su(1)
                   1469: 
1.66      asau     1470: $ make PACKAGES=$HOME/packages install
1.17      imil     1471: 
                   1472: Then, as a simple user
                   1473: 
                   1474: $ make clean
                   1475: 
1.4       rillig   1476: 5.4. Selecting and configuring the compiler
                   1477: 
                   1478: 5.4.1. Selecting the compiler
1.1       dsieger  1479: 
                   1480: By default, pkgsrc will use GCC to build packages. This may be overridden by
                   1481: setting the following variables in /etc/mk.conf:
                   1482: 
                   1483: PKGSRC_COMPILER:
                   1484: 
                   1485:     This is a list of values specifying the chain of compilers to invoke when
                   1486:     building packages. Valid values are:
                   1487: 
1.66      asau     1488:       + ccc: Compaq C Compilers (Tru64)
                   1489: 
                   1490:       + ccache: compiler cache (chainable)
                   1491: 
                   1492:       + clang: Clang C and Objective-C compiler
                   1493: 
1.42      asau     1494:       + distcc: distributed C/C++ (chainable)
1.1       dsieger  1495: 
1.66      asau     1496:       + f2c: Fortran 77 to C compiler (chainable)
                   1497: 
                   1498:       + icc: Intel C++ Compiler (Linux)
                   1499: 
                   1500:       + ido: SGI IRIS Development Option cc (IRIX 5)
1.1       dsieger  1501: 
1.42      asau     1502:       + gcc: GNU C/C++ Compiler
1.1       dsieger  1503: 
1.66      asau     1504:       + hp: HP-UX C/aC++ compilers
                   1505: 
1.42      asau     1506:       + mipspro: Silicon Graphics, Inc. MIPSpro (n32/n64)
1.1       dsieger  1507: 
1.66      asau     1508:       + mipspro-ucode: Silicon Graphics, Inc. MIPSpro (o32)
1.1       dsieger  1509: 
1.42      asau     1510:       + sunpro: Sun Microsystems, Inc. WorkShip/Forte/Sun ONE Studio
1.1       dsieger  1511: 
1.118     sevan    1512:       + xlc: IBM's XL C/C++ compiler suite
1.66      asau     1513: 
1.1       dsieger  1514:     The default is "gcc". You can use ccache and/or distcc with an appropriate
                   1515:     PKGSRC_COMPILER setting, e.g. "ccache gcc". This variable should always be
                   1516:     terminated with a value for a real compiler. Note that only one real
                   1517:     compiler should be listed (e.g. "sunpro gcc" is not allowed).
                   1518: 
                   1519: GCC_REQD:
                   1520: 
                   1521:     This specifies the minimum version of GCC to use when building packages. If
                   1522:     the system GCC doesn't satisfy this requirement, then pkgsrc will build and
                   1523:     install one of the GCC packages to use instead.
                   1524: 
1.114     maya     1525: PYTHON_DEFAULT_VERSION:
                   1526: 
                   1527:     Specifies which version of python to use when several options are
                   1528:     available.
                   1529: 
                   1530: PKGSRC_FORTRAN:
                   1531: 
                   1532:     Specifies the fortran compiler to use. The default is g95, and gfortran is
                   1533:     an alternative.
                   1534: 
                   1535: GFORTRAN_VERSION:
                   1536: 
                   1537:     If PKGSRC_FORTRAN= gfortran is used, this option specifies which version to
                   1538:     use.
                   1539: 
1.4       rillig   1540: 5.4.2. Additional flags to the compiler (CFLAGS)
1.1       dsieger  1541: 
                   1542: If you wish to set the CFLAGS variable, please make sure to use the += operator
                   1543: instead of the = operator:
                   1544: 
                   1545: CFLAGS+=        -your -flags
                   1546: 
                   1547: Using CFLAGS= (i.e. without the "+") may lead to problems with packages that
1.16      jnemeth  1548: need to add their own flags. You may want to take a look at the devel/cpuflags
1.24      wiz      1549: package if you're interested in optimization specifically for the current CPU.
1.1       dsieger  1550: 
1.4       rillig   1551: 5.4.3. Additional flags to the linker (LDFLAGS)
1.1       dsieger  1552: 
                   1553: If you want to pass flags to the linker, both in the configure step and the
                   1554: build step, you can do this in two ways. Either set LDFLAGS or LIBS. The
                   1555: difference between the two is that LIBS will be appended to the command line,
                   1556: while LDFLAGS come earlier. LDFLAGS is pre-loaded with rpath settings for ELF
                   1557: machines depending on the setting of USE_IMAKE or the inclusion of mk/
                   1558: x11.buildlink3.mk. As with CFLAGS, if you do not wish to override these
                   1559: settings, use the += operator:
                   1560: 
                   1561: LDFLAGS+=        -your -linkerflags
                   1562: 
1.4       rillig   1563: 5.5. Developer/advanced settings
1.1       dsieger  1564: 
                   1565:   * PKG_DEVELOPER: Run some sanity checks that package developers want:
                   1566: 
1.42      asau     1567:       + make sure patches apply with zero fuzz
1.1       dsieger  1568: 
1.42      asau     1569:       + run check-shlibs to see that all binaries will find their shared libs.
1.1       dsieger  1570: 
                   1571:   * PKG_DEBUG_LEVEL: The level of debugging output which is displayed whilst
                   1572:     making and installing the package. The default value for this is 0, which
                   1573:     will not display the commands as they are executed (normal, default, quiet
                   1574:     operation); the value 1 will display all shell commands before their
                   1575:     invocation, and the value 2 will display both the shell commands before
1.112     rillig   1576:     their invocation, as well as their actual execution progress with set -x.
1.1       dsieger  1577: 
1.4       rillig   1578: 5.6. Selecting Build Options
1.1       dsieger  1579: 
                   1580: Some packages have build time options, usually to select between different
                   1581: dependencies, enable optional support for big dependencies or enable
                   1582: experimental features.
                   1583: 
                   1584: To see which options, if any, a package supports, and which options are
                   1585: mutually exclusive, run make show-options, for example:
                   1586: 
                   1587:     The following options are supported by this package:
                   1588:         ssl      Enable SSL support.
                   1589:     Exactly one of the following gecko options is required:
                   1590:         firefox  Use firefox as gecko rendering engine.
                   1591:         mozilla  Use mozilla as gecko rendering engine.
                   1592:     At most one of the following database options may be selected:
                   1593:         mysql    Enable support for MySQL database.
                   1594:         pgsql    Enable support for PostgreSQL database.
                   1595: 
                   1596:     These options are enabled by default: firefox
                   1597:     These options are currently enabled: mozilla ssl
                   1598: 
1.4       rillig   1599: The following variables can be defined in mk.conf to select which options to
                   1600: enable for a package: PKG_DEFAULT_OPTIONS, which can be used to select or
1.1       dsieger  1601: disable options for all packages that support them, and PKG_OPTIONS.pkgbase,
                   1602: which can be used to select or disable options specifically for package pkgbase
                   1603: . Options listed in these variables are selected, options preceded by "-" are
                   1604: disabled. A few examples:
                   1605: 
1.4       rillig   1606: $ grep "PKG.*OPTION" mk.conf
1.1       dsieger  1607: PKG_DEFAULT_OPTIONS=    -arts -dvdread -esound
                   1608: PKG_OPTIONS.kdebase=    debug -sasl
                   1609: PKG_OPTIONS.apache=     suexec
                   1610: 
1.11      rillig   1611: It is important to note that options that were specifically suggested by the
1.19      snj      1612: package maintainer must be explicitly removed if you do not wish to include the
                   1613: option. If you are unsure you can view the current state with make show-options
                   1614: .
1.11      rillig   1615: 
1.1       dsieger  1616: The following settings are consulted in the order given, and the last setting
                   1617: that selects or disables an option is used:
                   1618: 
                   1619:  1. the default options as suggested by the package maintainer
                   1620: 
                   1621:  2. the options implied by the settings of legacy variables (see below)
                   1622: 
                   1623:  3. PKG_DEFAULT_OPTIONS
                   1624: 
                   1625:  4. PKG_OPTIONS.pkgbase
                   1626: 
                   1627: For groups of mutually exclusive options, the last option selected is used, all
                   1628: others are automatically disabled. If an option of the group is explicitly
                   1629: disabled, the previously selected option, if any, is used. It is an error if no
                   1630: option from a required group of options is selected, and building the package
                   1631: will fail.
                   1632: 
                   1633: Before the options framework was introduced, build options were selected by
1.4       rillig   1634: setting a variable (often named USE_FOO) in mk.conf for each option. To ease
                   1635: transition to the options framework for the user, these legacy variables are
                   1636: converted to the appropriate options setting (PKG_OPTIONS.pkgbase)
                   1637: automatically. A warning is issued to prompt the user to update mk.conf to use
                   1638: the options framework directly. Support for the legacy variables will be
1.1       dsieger  1639: removed eventually.
                   1640: 
                   1641: Chapter 6. Creating binary packages
                   1642: 
                   1643: Table of Contents
                   1644: 
                   1645: 6.1. Building a single binary package
                   1646: 6.2. Settings for creation of binary packages
                   1647: 
                   1648: 6.1. Building a single binary package
                   1649: 
                   1650: Once you have built and installed a package, you can create a binary package
                   1651: which can be installed on another system with pkg_add(1). This saves having to
                   1652: build the same package on a group of hosts and wasting CPU time. It also
                   1653: provides a simple means for others to install your package, should you
                   1654: distribute it.
                   1655: 
                   1656: To create a binary package, change into the appropriate directory in pkgsrc,
                   1657: and run make package:
                   1658: 
1.112     rillig   1659: $ cd misc/figlet
                   1660: $ make package
1.1       dsieger  1661: 
                   1662: This will build and install your package (if not already done), and then build
                   1663: a binary package from what was installed. You can then use the pkg_* tools to
                   1664: manipulate it. Binary packages are created by default in /usr/pkgsrc/packages,
                   1665: in the form of a gzipped tar file. See Section B.2, "Packaging figlet" for a
                   1666: continuation of the above misc/figlet example.
                   1667: 
1.6       rillig   1668: See Chapter 21, Submitting and Committing for information on how to submit such
1.1       dsieger  1669: a binary package.
                   1670: 
                   1671: 6.2. Settings for creation of binary packages
                   1672: 
1.6       rillig   1673: See Section 17.17, "Other helpful targets".
                   1674: 
                   1675: Chapter 7. Creating binary packages for everything in pkgsrc (bulk builds)
                   1676: 
                   1677: Table of Contents
                   1678: 
1.71      wiz      1679: 7.1. Preparations
                   1680: 7.2. Running a pbulk-style bulk build
1.6       rillig   1681: 
1.71      wiz      1682:     7.2.1. Configuration
1.6       rillig   1683: 
1.71      wiz      1684: 7.3. Requirements of a full bulk build
1.66      asau     1685: 7.4. Creating a multiple CD-ROM packages collection
1.6       rillig   1686: 
1.66      asau     1687:     7.4.1. Example of cdpack
1.6       rillig   1688: 
1.71      wiz      1689: For a number of reasons you may want to build binary packages for a large
                   1690: selected set of packages in pkgsrc or even for all pkgsrc packages. For
                   1691: instance, when you have multiple machines that should run the same software, it
                   1692: is wasted time if they all build their packages themselves from source. Or you
                   1693: may want to build a list of packages you want and check them before deploying
                   1694: onto production system. There is a way of getting a set of binary packages: The
1.112     rillig   1695: bulk build system, or pbulk ("p" stands for "parallel"). This chapter describes
                   1696: how to set it up.
1.71      wiz      1697: 
                   1698: 7.1. Preparations
                   1699: 
                   1700: First of all, you have to decide whether you build all packages or a limited
                   1701: set of them. Full bulk builds usually consume a lot more resources, both space
                   1702: and time, than builds for some practical sets of packages. There exists a
                   1703: number of particularly heavy packages that are not actually interesting to a
                   1704: wide audience. For a limited bulk builds you need to make a list of packages
1.112     rillig   1705: you want to build. Note that all their dependencies will be built, so you don't
                   1706: need to track them manually.
1.71      wiz      1707: 
                   1708: During bulk builds various packages are installed and deinstalled in /usr/pkg
                   1709: (or whatever LOCALBASE is), so make sure that you don't need any package during
1.112     rillig   1710: the builds. Essentially, you should provide a fresh system, either a chroot
1.71      wiz      1711: environment or something even more restrictive, depending on what the operating
                   1712: system provides, or dedicate the whole physical machine. As a useful side
                   1713: effect this makes sure that bulk builds cannot break anything in your system.
                   1714: There have been numerous cases where certain packages tried to install files
                   1715: outside the LOCALBASE or wanted to edit some files in /etc.
1.6       rillig   1716: 
1.71      wiz      1717: 7.2. Running a pbulk-style bulk build
1.6       rillig   1718: 
1.15      rillig   1719: Running a pbulk-style bulk build works roughly as follows:
                   1720: 
                   1721:   * First, build the pbulk infrastructure in a fresh pkgsrc location.
                   1722: 
                   1723:   * Then, build each of the packages from a clean installation directory using
                   1724:     the infrastructure.
                   1725: 
1.71      wiz      1726: 7.2.1. Configuration
1.6       rillig   1727: 
1.112     rillig   1728: To simplify configuration, we provide the helper script mk/pbulk/pbulk.sh.
1.6       rillig   1729: 
1.68      asau     1730: In order to use it, prepare a clear system (real one, chroot environment, jail,
                   1731: zone, virtual machine). Configure network access to fetch distribution files.
1.112     rillig   1732: Create a user with name "pbulk".
1.68      asau     1733: 
                   1734: Fetch and extract pkgsrc. Use a command like one of these:
                   1735: 
1.72      wiz      1736: # (cd /usr && ftp -o - http://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc.tar.gz | tar -zxf-)
                   1737: # (cd /usr && fetch -o - http://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc.tar.gz | tar -zxf-)
                   1738: # (cd /usr && cvs -Q -z3 -d anoncvs@anoncvs.NetBSD.org:/cvsroot get -P pkgsrc)
1.68      asau     1739: 
                   1740: Or any other way that fits (e.g., curl, wget).
                   1741: 
                   1742: Deploy and configure pbulk tools, e.g.:
                   1743: 
1.118     sevan    1744: # sh pbulk.sh -n # use native make, no bootstrap kit needed (for use on NetBSD)
1.68      asau     1745: # sh pbulk.sh -n -c mk.conf.frag # native, apply settings from given mk.conf fragment
                   1746: # sh pbulk.sh -nlc mk.conf.frag # native, apply settings, configure for limited build
                   1747: 
                   1748: Note
                   1749: 
                   1750: mk.conf.frag is a fragment of mk.conf that contains settings you want to apply
                   1751: to packages you build. For instance,
                   1752: 
1.112     rillig   1753: PKG_DEVELOPER=          yes     # perform more checks
                   1754: X11_TYPE=               modular # use pkgsrc X11
                   1755: SKIP_LICENSE_CHECK=     yes     # accept all licences (useful
                   1756:                                 # when building all packages)
1.68      asau     1757: 
                   1758: If configured for limited list, replace the list in /usr/pbulk/etc/pbulk.list
1.112     rillig   1759: with your list of packages, one per line without empty lines or comments. E.g.:
1.68      asau     1760: 
                   1761: www/firefox
                   1762: mail/thunderbird
                   1763: misc/libreoffice4
                   1764: 
1.69      asau     1765: At this point you can also review configuration in /usr/pbulk/etc and make
                   1766: final amendments, if wanted.
                   1767: 
1.68      asau     1768: Start it:
                   1769: 
                   1770: # /usr/pbulk/bin/bulkbuild
                   1771: 
                   1772: After it finishes, you'll have /mnt filled with distribution files, binary
                   1773: packages, and reports, plain text summary in /mnt/bulklog/meta/report.txt
                   1774: 
                   1775: Note
                   1776: 
                   1777: The pbulk.sh script does not cover all possible use cases. While being ready to
                   1778: run, it serves as a good starting point to understand and build more complex
                   1779: setups. The script is kept small enough for better understanding.
                   1780: 
                   1781: Note
                   1782: 
                   1783: The pbulk.sh script supports running unprivileged bulk build and helps
                   1784: configuring distributed bulk builds.
1.15      rillig   1785: 
1.71      wiz      1786: 7.3. Requirements of a full bulk build
                   1787: 
                   1788: A complete bulk build requires lots of disk space. Some of the disk space can
                   1789: be read-only, some other must be writable. Some can be on remote filesystems
                   1790: (such as NFS) and some should be local. Some can be temporary filesystems,
                   1791: others must survive a sudden reboot.
                   1792: 
                   1793:   * 40 GB for the distfiles (read-write, remote, temporary)
                   1794: 
                   1795:   * 30 GB for the binary packages (read-write, remote, permanent)
                   1796: 
                   1797:   * 1 GB for the pkgsrc tree (read-only, remote, permanent)
                   1798: 
                   1799:   * 5 GB for LOCALBASE (read-write, local, temporary)
                   1800: 
                   1801:   * 10 GB for the log files (read-write, remote, permanent)
                   1802: 
                   1803:   * 5 GB for temporary files (read-write, local, temporary)
                   1804: 
1.66      asau     1805: 7.4. Creating a multiple CD-ROM packages collection
1.1       dsieger  1806: 
                   1807: After your pkgsrc bulk-build has completed, you may wish to create a CD-ROM set
                   1808: of the resulting binary packages to assist in installing packages on other
                   1809: machines. The pkgtools/cdpack package provides a simple tool for creating the
                   1810: ISO 9660 images. cdpack arranges the packages on the CD-ROMs in a way that
                   1811: keeps all the dependencies for a given package on the same CD as that package.
                   1812: 
1.66      asau     1813: 7.4.1. Example of cdpack
1.1       dsieger  1814: 
                   1815: Complete documentation for cdpack is found in the cdpack(1) man page. The
                   1816: following short example assumes that the binary packages are left in /usr/
                   1817: pkgsrc/packages/All and that sufficient disk space exists in /u2 to hold the
                   1818: ISO 9660 images.
                   1819: 
                   1820: # mkdir /u2/images
                   1821: # pkg_add /usr/pkgsrc/packages/All/cdpack
                   1822: # cdpack /usr/pkgsrc/packages/All /u2/images
                   1823: 
                   1824: 
                   1825: If you wish to include a common set of files (COPYRIGHT, README, etc.) on each
                   1826: CD in the collection, then you need to create a directory which contains these
                   1827: files. e.g.
                   1828: 
                   1829: # mkdir /tmp/common
                   1830: # echo "This is a README" > /tmp/common/README
                   1831: # echo "Another file" > /tmp/common/COPYING
                   1832: # mkdir /tmp/common/bin
                   1833: # echo "#!/bin/sh" > /tmp/common/bin/myscript
                   1834: # echo "echo Hello world" >> /tmp/common/bin/myscript
                   1835: # chmod 755 /tmp/common/bin/myscript
                   1836: 
                   1837: 
                   1838: Now create the images:
                   1839: 
                   1840: # cdpack -x /tmp/common /usr/pkgsrc/packages/All /u2/images
                   1841: 
                   1842: Each image will contain README, COPYING, and bin/myscript in their root
                   1843: directories.
                   1844: 
1.6       rillig   1845: Chapter 8. Directory layout of the installed files
1.1       dsieger  1846: 
                   1847: Table of Contents
                   1848: 
1.6       rillig   1849: 8.1. File system layout in ${LOCALBASE}
                   1850: 8.2. File system layout in ${VARBASE}
1.1       dsieger  1851: 
                   1852: The files that are installed by pkgsrc are organized in a way that is similar
                   1853: to what you find in the /usr directory of the base system. But some details are
                   1854: different. This is because pkgsrc initially came from FreeBSD and had adopted
                   1855: its file system hierarchy. Later it was largely influenced by NetBSD. But no
                   1856: matter which operating system you are using pkgsrc with, you can expect the
                   1857: same layout for pkgsrc.
                   1858: 
                   1859: There are mainly four root directories for pkgsrc, which are all configurable
                   1860: in the bootstrap/bootstrap script. When pkgsrc has been installed as root, the
                   1861: default locations are:
                   1862: 
                   1863: LOCALBASE=              /usr/pkg
                   1864: PKG_SYSCONFBASE=        /usr/pkg/etc
                   1865: VARBASE=                /var
1.119     sevan    1866: PKG_DBDIR=              /usr/pkg/pkgdb
1.1       dsieger  1867: 
                   1868: In unprivileged mode (when pkgsrc has been installed as any other user), the
                   1869: default locations are:
                   1870: 
                   1871: LOCALBASE=              ${HOME}/pkg
                   1872: PKG_SYSCONFBASE=        ${HOME}/pkg/etc
                   1873: VARBASE=                ${HOME}/pkg/var
1.119     sevan    1874: PKG_DBDIR=              ${HOME}/pkg/pkgdb
1.1       dsieger  1875: 
                   1876: What these four directories are for, and what they look like is explained
                   1877: below.
                   1878: 
1.25      wiz      1879:   * LOCALBASE corresponds to the /usr directory in the base system. It is the "
                   1880:     main" directory where the files are installed and contains the well-known
1.1       dsieger  1881:     subdirectories like bin, include, lib, share and sbin.
                   1882: 
                   1883:   * VARBASE corresponds to /var in the base system. Some programs (especially
                   1884:     games, network daemons) need write access to it during normal operation.
                   1885: 
                   1886:   * PKG_SYSCONFDIR corresponds to /etc in the base system. It contains
                   1887:     configuration files of the packages, as well as pkgsrc's mk.conf itself.
                   1888: 
1.6       rillig   1889: 8.1. File system layout in ${LOCALBASE}
1.1       dsieger  1890: 
                   1891: The following directories exist in a typical pkgsrc installation in $
                   1892: {LOCALBASE}.
                   1893: 
                   1894: bin
                   1895: 
                   1896:     Contains executable programs that are intended to be directly used by the
                   1897:     end user.
                   1898: 
                   1899: emul
                   1900: 
                   1901:     Contains files for the emulation layers of various other operating systems,
                   1902:     especially for NetBSD.
                   1903: 
                   1904: etc (the usual location of ${PKG_SYSCONFDIR})
                   1905: 
                   1906:     Contains the configuration files.
                   1907: 
                   1908: include
                   1909: 
                   1910:     Contains headers for the C and C++ programming languages.
                   1911: 
                   1912: info
                   1913: 
                   1914:     Contains GNU info files of various packages.
                   1915: 
                   1916: lib
                   1917: 
                   1918:     Contains shared and static libraries.
                   1919: 
                   1920: libdata
                   1921: 
                   1922:     Contains data files that don't change after installation. Other data files
                   1923:     belong into ${VARBASE}.
                   1924: 
                   1925: libexec
                   1926: 
                   1927:     Contains programs that are not intended to be used by end users, such as
                   1928:     helper programs or network daemons.
                   1929: 
                   1930: libexec/cgi-bin
                   1931: 
                   1932:     Contains programs that are intended to be executed as CGI scripts by a web
                   1933:     server.
                   1934: 
                   1935: man (the usual value of ${PKGMANDIR})
                   1936: 
                   1937:     Contains brief documentation in form of manual pages.
                   1938: 
                   1939: sbin
                   1940: 
                   1941:     Contains programs that are intended to be used only by the super-user.
                   1942: 
                   1943: share
                   1944: 
                   1945:     Contains platform-independent data files that don't change after
                   1946:     installation.
                   1947: 
                   1948: share/doc
                   1949: 
                   1950:     Contains documentation files provided by the packages.
                   1951: 
                   1952: share/examples
                   1953: 
                   1954:     Contains example files provided by the packages. Among others, the original
                   1955:     configuration files are saved here and copied to ${PKG_SYSCONFDIR} during
                   1956:     installation.
                   1957: 
                   1958: share/examples/rc.d
                   1959: 
                   1960:     Contains the original files for rc.d scripts.
                   1961: 
                   1962: var (the usual location of ${VARBASE})
                   1963: 
                   1964:     Contains files that may be modified after installation.
                   1965: 
1.6       rillig   1966: 8.2. File system layout in ${VARBASE}
1.1       dsieger  1967: 
                   1968: db/pkg (the usual location of ${PKG_DBDIR})
                   1969: 
                   1970:     Contains information about the currently installed packages.
                   1971: 
                   1972: games
                   1973: 
                   1974:     Contains highscore files.
                   1975: 
                   1976: log
                   1977: 
                   1978:     Contains log files.
                   1979: 
                   1980: run
                   1981: 
                   1982:     Contains informational files about daemons that are currently running.
                   1983: 
1.6       rillig   1984: Chapter 9. Frequently Asked Questions
1.1       dsieger  1985: 
                   1986: Table of Contents
                   1987: 
1.6       rillig   1988: 9.1. Are there any mailing lists for pkg-related discussion?
1.84      wiz      1989: 9.2. Utilities for package management (pkgtools)
                   1990: 9.3. How to use pkgsrc as non-root
                   1991: 9.4. How to resume transfers when fetching distfiles?
                   1992: 9.5. How can I install/use modular X.org from pkgsrc?
                   1993: 9.6. How to fetch files from behind a firewall
                   1994: 9.7. How to fetch files from HTTPS sites
                   1995: 9.8. How do I tell make fetch to do passive FTP?
                   1996: 9.9. How to fetch all distfiles at once
                   1997: 9.10. What does "Don't know how to make /usr/share/tmac/tmac.andoc" mean?
                   1998: 9.11. What does "Could not find bsd.own.mk" mean?
                   1999: 9.12. Using 'sudo' with pkgsrc
                   2000: 9.13. How do I change the location of configuration files?
                   2001: 9.14. Automated security checks
                   2002: 9.15. Why do some packages ignore my CFLAGS?
                   2003: 9.16. A package does not build. What shall I do?
                   2004: 9.17. What does "Makefile appears to contain unresolved cvs/rcs/??? merge
1.24      wiz      2005:     conflicts" mean?
1.1       dsieger  2006: 
                   2007: This section contains hints, tips & tricks on special things in pkgsrc that we
                   2008: didn't find a better place for in the previous chapters, and it contains items
                   2009: for both pkgsrc users and developers.
                   2010: 
1.6       rillig   2011: 9.1. Are there any mailing lists for pkg-related discussion?
1.1       dsieger  2012: 
                   2013: The following mailing lists may be of interest to pkgsrc users:
                   2014: 
                   2015:   * pkgsrc-users: This is a general purpose list for most issues regarding
                   2016:     pkgsrc, regardless of platform, e.g. soliciting user help for pkgsrc
                   2017:     configuration, unexpected build failures, using particular packages,
                   2018:     upgrading pkgsrc installations, questions regarding the pkgsrc release
                   2019:     branches, etc. General announcements or proposals for changes that impact
                   2020:     the pkgsrc user community, e.g. major infrastructure changes, new features,
                   2021:     package removals, etc., may also be posted.
                   2022: 
                   2023:   * pkgsrc-bulk: A list where the results of pkgsrc bulk builds are sent and
                   2024:     discussed.
                   2025: 
                   2026:   * pkgsrc-changes: This list is for those who are interested in getting a
                   2027:     commit message for every change committed to pkgsrc. It is also available
                   2028:     in digest form, meaning one daily message containing all commit messages
                   2029:     for changes to the package source tree in that 24 hour period.
                   2030: 
                   2031: To subscribe, do:
                   2032: 
                   2033: % echo subscribe listname | mail majordomo@NetBSD.org
                   2034: 
                   2035: Archives for all these mailing lists are available from http://
                   2036: mail-index.NetBSD.org/.
                   2037: 
1.84      wiz      2038: 9.2. Utilities for package management (pkgtools)
1.1       dsieger  2039: 
                   2040: The directory pkgsrc/pkgtools contains a number of useful utilities for both
                   2041: users and developers of pkgsrc. This section attempts only to make the reader
1.121     sevan    2042: aware of some of the utilities and when they might be useful, and not to
                   2043: duplicate the documentation that comes with each package.
1.1       dsieger  2044: 
                   2045: Utilities used by pkgsrc (automatically installed when needed):
                   2046: 
                   2047:   * pkgtools/x11-links: Symlinks for use by buildlink.
                   2048: 
                   2049: OS tool augmentation (automatically installed when needed):
                   2050: 
1.121     sevan    2051:   * pkgtools/digest: Calculates various kinds of checksums (including SHA3).
1.1       dsieger  2052: 
                   2053:   * pkgtools/libnbcompat: Compatibility library for pkgsrc tools.
                   2054: 
                   2055:   * pkgtools/mtree: Installed on non-BSD systems due to lack of native mtree.
                   2056: 
                   2057:   * pkgtools/pkg_install: Up-to-date replacement for /usr/sbin/pkg_install, or
                   2058:     for use on operating systems where pkg_install is not present.
                   2059: 
                   2060: Utilities used by pkgsrc (not automatically installed):
                   2061: 
                   2062:   * pkgtools/pkg_tarup: Create a binary package from an already-installed
                   2063:     package. Used by make replace to save the old package.
                   2064: 
                   2065:   * pkgtools/dfdisk: Adds extra functionality to pkgsrc, allowing it to fetch
                   2066:     distfiles from multiple locations. It currently supports the following
                   2067:     methods: multiple CD-ROMs and network FTP/HTTP connections.
                   2068: 
                   2069:   * devel/cpuflags: Determine the best compiler flags to optimise code for your
1.24      wiz      2070:     current CPU and compiler.
1.1       dsieger  2071: 
                   2072: Utilities for keeping track of installed packages, being up to date, etc:
                   2073: 
1.65      wiz      2074:   * pkgtools/pkgin: A package update tool similar to apt(1). Download, install,
                   2075:     and upgrade binary packages easily.
                   2076: 
1.1       dsieger  2077:   * pkgtools/pkg_chk: Reports on packages whose installed versions do not match
                   2078:     the latest pkgsrc entries.
                   2079: 
                   2080:   * pkgtools/pkgdep: Makes dependency graphs of packages, to aid in choosing a
                   2081:     strategy for updating.
                   2082: 
                   2083:   * pkgtools/pkgdepgraph: Makes graphs from the output of pkgtools/pkgdep (uses
                   2084:     graphviz).
                   2085: 
1.12      weinem   2086:   * pkgtools/pkglint: The pkglint(1) program checks a pkgsrc entry for errors.
                   2087: 
                   2088:   * pkgtools/lintpkgsrc: The lintpkgsrc(1) program does various checks on the
                   2089:     complete pkgsrc system.
1.1       dsieger  2090: 
                   2091:   * pkgtools/pkgsurvey: Report what packages you have installed.
                   2092: 
                   2093: Utilities for people maintaining or creating individual packages:
                   2094: 
                   2095:   * pkgtools/pkgdiff: Automate making and maintaining patches for a package
                   2096:     (includes pkgdiff, pkgvi, mkpatches, etc.).
                   2097: 
1.65      wiz      2098:   * pkgtools/url2pkg: Aids in converting to pkgsrc.
1.1       dsieger  2099: 
                   2100: Utilities for people maintaining pkgsrc (or: more obscure pkg utilities)
                   2101: 
                   2102:   * pkgtools/pkg_comp: Build packages in a chrooted area.
                   2103: 
                   2104:   * pkgtools/libkver: Spoof kernel version for chrooted cross builds.
                   2105: 
1.84      wiz      2106: 9.3. How to use pkgsrc as non-root
1.1       dsieger  2107: 
1.108     rillig   2108: To install packages from source as a non-root user, download pkgsrc as
                   2109: described in Chapter 2, Where to get pkgsrc and how to keep it up-to-date, cd
                   2110: into that directory and run the command ./bootstrap/bootstrap --unprivileged.
                   2111: 
                   2112: This will install the binary part of pkgsrc to ~/pkg and put the pkgsrc
                   2113: configuration mk.conf into ~/pkg/etc.
                   2114: 
                   2115: For more details, see mk/unprivileged.mk.
1.1       dsieger  2116: 
1.84      wiz      2117: 9.4. How to resume transfers when fetching distfiles?
1.1       dsieger  2118: 
                   2119: By default, resuming transfers in pkgsrc is disabled, but you can enable this
1.4       rillig   2120: feature by adding the option PKG_RESUME_TRANSFERS=YES into mk.conf. If, during
                   2121: a fetch step, an incomplete distfile is found, pkgsrc will try to resume it.
1.1       dsieger  2122: 
1.61      wiz      2123: You can also use a different program than the platform default program by
                   2124: changing the FETCH_USING variable. You can specify the program by using of ftp,
                   2125: fetch, wget or curl. Alternatively, fetching can be disabled by using the value
                   2126: manual. A value of custom disables the system defaults and dependency tracking
                   2127: for the fetch program. In that case you have to provide FETCH_CMD,
                   2128: FETCH_BEFORE_ARGS, FETCH_RESUME_ARGS, FETCH_OUTPUT_ARGS, FETCH_AFTER_ARGS.
1.1       dsieger  2129: 
1.16      jnemeth  2130: For example, if you want to use wget to download, you'll have to use something
                   2131: like:
1.1       dsieger  2132: 
1.16      jnemeth  2133: FETCH_USING=    wget
1.1       dsieger  2134: 
1.84      wiz      2135: 9.5. How can I install/use modular X.org from pkgsrc?
1.1       dsieger  2136: 
1.4       rillig   2137: If you want to use modular X.org from pkgsrc instead of your system's own X11
                   2138: (/usr/X11R6, /usr/openwin, ...) you will have to add the following line into
1.1       dsieger  2139: mk.conf:
                   2140: 
1.4       rillig   2141: X11_TYPE=modular
1.1       dsieger  2142: 
1.84      wiz      2143: 9.6. How to fetch files from behind a firewall
1.1       dsieger  2144: 
                   2145: If you are sitting behind a firewall which does not allow direct connections to
                   2146: Internet hosts (i.e. non-NAT), you may specify the relevant proxy hosts. This
                   2147: is done using an environment variable in the form of a URL, e.g. in Amdahl, the
                   2148: machine "orpheus.amdahl.com" is one of the firewalls, and it uses port 80 as
                   2149: the proxy port number. So the proxy environment variables are:
                   2150: 
                   2151: ftp_proxy=ftp://orpheus.amdahl.com:80/
                   2152: http_proxy=http://orpheus.amdahl.com:80/
                   2153: 
1.84      wiz      2154: 9.7. How to fetch files from HTTPS sites
1.65      wiz      2155: 
                   2156: Some fetch tools are not prepared to support HTTPS by default (for example, the
                   2157: one in NetBSD 6.0), or the one installed by the pkgsrc bootstrap (to avoid an
                   2158: openssl dependency that low in the dependency graph).
                   2159: 
                   2160: Usually you won't notice, because distribution files are mirrored weekly to "
                   2161: ftp.NetBSD.org", but that might not be often enough if you are following
                   2162: pkgsrc-current. In that case, set FETCH_USING in your mk.conf file to "curl" or
                   2163: "wget", which are both compiled with HTTPS support by default. Of course, these
                   2164: tools need to be installed before you can use them this way.
                   2165: 
1.84      wiz      2166: 9.8. How do I tell make fetch to do passive FTP?
1.1       dsieger  2167: 
                   2168: This depends on which utility is used to retrieve distfiles. From bsd.pkg.mk,
                   2169: FETCH_CMD is assigned the first available command from the following list:
                   2170: 
                   2171:   * ${LOCALBASE}/bin/ftp
                   2172: 
                   2173:   * /usr/bin/ftp
                   2174: 
                   2175: On a default NetBSD installation, this will be /usr/bin/ftp, which
                   2176: automatically tries passive connections first, and falls back to active
                   2177: connections if the server refuses to do passive. For the other tools, add the
1.4       rillig   2178: following to your mk.conf file: PASSIVE_FETCH=1.
1.1       dsieger  2179: 
                   2180: Having that option present will prevent /usr/bin/ftp from falling back to
                   2181: active transfers.
                   2182: 
1.84      wiz      2183: 9.9. How to fetch all distfiles at once
1.1       dsieger  2184: 
                   2185: You would like to download all the distfiles in a single batch from work or
                   2186: university, where you can't run a make fetch. There is an archive of distfiles
                   2187: on ftp.NetBSD.org, but downloading the entire directory may not be appropriate.
                   2188: 
                   2189: The answer here is to do a make fetch-list in /usr/pkgsrc or one of its
                   2190: subdirectories, carry the resulting list to your machine at work/school and use
                   2191: it there. If you don't have a NetBSD-compatible ftp(1) (like tnftp) at work,
                   2192: don't forget to set FETCH_CMD to something that fetches a URL:
                   2193: 
                   2194: At home:
                   2195: 
                   2196: % cd /usr/pkgsrc
                   2197: % make fetch-list FETCH_CMD=wget DISTDIR=/tmp/distfiles >/tmp/fetch.sh
                   2198: % scp /tmp/fetch.sh work:/tmp
                   2199: 
                   2200: At work:
                   2201: 
                   2202: % sh /tmp/fetch.sh
                   2203: 
                   2204: then tar up /tmp/distfiles and take it home.
                   2205: 
                   2206: If you have a machine running NetBSD, and you want to get all distfiles (even
                   2207: ones that aren't for your machine architecture), you can do so by using the
                   2208: above-mentioned make fetch-list approach, or fetch the distfiles directly by
                   2209: running:
                   2210: 
                   2211: % make mirror-distfiles
                   2212: 
                   2213: If you even decide to ignore NO_{SRC,BIN}_ON_{FTP,CDROM}, then you can get
                   2214: everything by running:
                   2215: 
                   2216: % make fetch NO_SKIP=yes
                   2217: 
1.84      wiz      2218: 9.10. What does "Don't know how to make /usr/share/tmac/tmac.andoc" mean?
1.1       dsieger  2219: 
                   2220: When compiling the pkgtools/pkg_install package, you get the error from make
                   2221: that it doesn't know how to make /usr/share/tmac/tmac.andoc? This indicates
                   2222: that you don't have installed the "text" set (nroff, ...) from the NetBSD base
                   2223: distribution on your machine. It is recommended to do that to format man pages.
                   2224: 
                   2225: In the case of the pkgtools/pkg_install package, you can get away with setting
1.4       rillig   2226: NOMAN=YES either in the environment or in mk.conf.
1.1       dsieger  2227: 
1.84      wiz      2228: 9.11. What does "Could not find bsd.own.mk" mean?
1.1       dsieger  2229: 
                   2230: You didn't install the compiler set, comp.tgz, when you installed your NetBSD
                   2231: machine. Please get and install it, by extracting it in /:
                   2232: 
                   2233: # cd /
                   2234: # tar --unlink -zxvpf .../comp.tgz
                   2235: 
                   2236: comp.tgz is part of every NetBSD release. Get the one that corresponds to your
                   2237: release (determine via uname -r).
                   2238: 
1.84      wiz      2239: 9.12. Using 'sudo' with pkgsrc
1.1       dsieger  2240: 
                   2241: When installing packages as non-root user and using the just-in-time su(1)
                   2242: feature of pkgsrc, it can become annoying to type in the root password for each
                   2243: required package installed. To avoid this, the sudo package can be used, which
                   2244: does password caching over a limited time. To use it, install sudo (either as
1.4       rillig   2245: binary package or from security/sudo) and then put the following into your
                   2246: mk.conf, somewhere after the definition of the LOCALBASE variable:
1.1       dsieger  2247: 
                   2248: .if exists(${LOCALBASE}/bin/sudo)
                   2249: SU_CMD=        ${LOCALBASE}/bin/sudo /bin/sh -c
                   2250: .endif
                   2251: 
1.84      wiz      2252: 9.13. How do I change the location of configuration files?
1.1       dsieger  2253: 
                   2254: As the system administrator, you can choose where configuration files are
                   2255: installed. The default settings make all these files go into ${PREFIX}/etc or
                   2256: some of its subdirectories; this may be suboptimal depending on your
                   2257: expectations (e.g., a read-only, NFS-exported PREFIX with a need of per-machine
                   2258: configuration of the provided packages).
                   2259: 
                   2260: In order to change the defaults, you can modify the PKG_SYSCONFBASE variable
1.4       rillig   2261: (in mk.conf) to point to your preferred configuration directory; some common
                   2262: examples include /etc or /etc/pkg.
1.1       dsieger  2263: 
                   2264: Furthermore, you can change this value on a per-package basis by setting the
                   2265: PKG_SYSCONFDIR.${PKG_SYSCONFVAR} variable. PKG_SYSCONFVAR's value usually
                   2266: matches the name of the package you would like to modify, that is, the contents
                   2267: of PKGBASE.
                   2268: 
                   2269: Note that after changing these settings, you must rebuild and reinstall any
                   2270: affected packages.
                   2271: 
1.84      wiz      2272: 9.14. Automated security checks
1.1       dsieger  2273: 
                   2274: Please be aware that there can often be bugs in third-party software, and some
                   2275: of these bugs can leave a machine vulnerable to exploitation by attackers. In
                   2276: an effort to lessen the exposure, the NetBSD packages team maintains a database
                   2277: of known-exploits to packages which have at one time been included in pkgsrc.
                   2278: The database can be downloaded automatically, and a security audit of all
1.14      jmcneill 2279: packages installed on a system can take place. To do this, refer to the
                   2280: following two tools (installed as part of the pkgtools/pkg_install package):
1.1       dsieger  2281: 
1.21      snj      2282:  1. pkg_admin fetch-pkg-vulnerabilities, an easy way to download a list of the
                   2283:     security vulnerabilities information. This list is kept up to date by the
1.26      spz      2284:     pkgsrc security team, and is distributed from the NetBSD ftp server:
1.1       dsieger  2285: 
1.26      spz      2286:     ftp://ftp.NetBSD.org/pkgsrc/distfiles/pkg-vulnerabilities
1.1       dsieger  2287: 
1.21      snj      2288:  2. pkg_admin audit, an easy way to audit the current machine, checking each
1.24      wiz      2289:     known vulnerability. If a vulnerable package is installed, it will be shown
                   2290:     by output to stdout, including a description of the type of vulnerability,
                   2291:     and a URL containing more information.
1.1       dsieger  2292: 
1.121     sevan    2293: Use of these tools is strongly recommended! See Section 4.1.5, "Checking for
                   2294: security vulnerabilities in installed packages" for instructions on how to
                   2295: automate checking and reporting.
                   2296: 
                   2297: If this database is installed, pkgsrc builds will use it to perform a security
                   2298: check before building any package.
1.1       dsieger  2299: 
1.84      wiz      2300: 9.15. Why do some packages ignore my CFLAGS?
1.1       dsieger  2301: 
                   2302: When you add your own preferences to the CFLAGS variable in your mk.conf, these
                   2303: flags are passed in environment variables to the ./configure scripts and to
                   2304: make(1). Some package authors ignore the CFLAGS from the environment variable
                   2305: by overriding them in the Makefiles of their package.
                   2306: 
                   2307: Currently there is no solution to this problem. If you really need the package
                   2308: to use your CFLAGS you should run make patch in the package directory and then
                   2309: inspect any Makefile and Makefile.in for whether they define CFLAGS explicitly.
                   2310: Usually you can remove these lines. But be aware that some "smart" programmers
                   2311: write so bad code that it only works for the specific combination of CFLAGS
                   2312: they have chosen.
                   2313: 
1.84      wiz      2314: 9.16. A package does not build. What shall I do?
1.1       dsieger  2315: 
                   2316:  1. Make sure that your copy of pkgsrc is consistent. A case that occurs often
                   2317:     is that people only update pkgsrc in parts, because of performance reasons.
                   2318:     Since pkgsrc is one large system, not a collection of many small systems,
                   2319:     there are sometimes changes that only work when the whole pkgsrc tree is
                   2320:     updated.
                   2321: 
1.25      wiz      2322:  2. Make sure that you don't have any CVS conflicts. Search for "<<<<<<" or "
                   2323:     >>>>>>" in all your pkgsrc files.
1.1       dsieger  2324: 
1.25      wiz      2325:  3. Make sure that you don't have old copies of the packages extracted. Run 
1.1       dsieger  2326:     make clean clean-depends to verify this.
                   2327: 
1.108     rillig   2328:  4. If you are a package developer who wants to invest some work, have a look
                   2329:     at Chapter 19, Making your package work.
                   2330: 
                   2331:  5. If the problem still exists, write a mail to the pkgsrc-users mailing list.
1.1       dsieger  2332: 
1.84      wiz      2333: 9.17. What does "Makefile appears to contain unresolved cvs/rcs/??? merge
1.1       dsieger  2334: conflicts" mean?
                   2335: 
                   2336: You have modified a file from pkgsrc, and someone else has modified that same
                   2337: file afterwards in the CVS repository. Both changes are in the same region of
                   2338: the file, so when you updated pkgsrc, the cvs command marked the conflicting
                   2339: changes in the file. Because of these markers, the file is no longer a valid
                   2340: Makefile.
                   2341: 
                   2342: Have a look at that file, and if you don't need your local changes anymore, you
                   2343: can remove that file and run cvs -q update -dP in that directory to download
                   2344: the current version.
                   2345: 
                   2346: Part II. The pkgsrc developer's guide
                   2347: 
                   2348: This part of the book deals with creating and modifying packages. It starts
                   2349: with a "HOWTO"-like guide on creating a new package. The remaining chapters are
                   2350: more like a reference manual for pkgsrc.
                   2351: 
                   2352: Table of Contents
                   2353: 
1.6       rillig   2354: 10. Creating a new pkgsrc package from scratch
1.1       dsieger  2355: 
1.6       rillig   2356:     10.1. Common types of packages
1.1       dsieger  2357: 
1.6       rillig   2358:         10.1.1. Perl modules
1.121     sevan    2359:         10.1.2. KDE3 & KDE4 applications
1.17      imil     2360:         10.1.3. Python modules and programs
1.1       dsieger  2361: 
1.6       rillig   2362:     10.2. Examples
1.1       dsieger  2363: 
1.6       rillig   2364:         10.2.1. How the www/nvu package came into pkgsrc
1.1       dsieger  2365: 
1.6       rillig   2366: 11. Package components - files, directories and contents
1.1       dsieger  2367: 
1.6       rillig   2368:     11.1. Makefile
                   2369:     11.2. distinfo
                   2370:     11.3. patches/*
1.1       dsieger  2371: 
1.6       rillig   2372:         11.3.1. Structure of a single patch file
                   2373:         11.3.2. Creating patch files
                   2374:         11.3.3. Sources where the patch files come from
                   2375:         11.3.4. Patching guidelines
                   2376:         11.3.5. Feedback to the author
1.1       dsieger  2377: 
1.6       rillig   2378:     11.4. Other mandatory files
                   2379:     11.5. Optional files
1.1       dsieger  2380: 
1.6       rillig   2381:         11.5.1. Files affecting the binary package
                   2382:         11.5.2. Files affecting the build process
                   2383:         11.5.3. Files affecting nothing at all
1.1       dsieger  2384: 
1.6       rillig   2385:     11.6. work*
                   2386:     11.7. files/*
1.1       dsieger  2387: 
1.6       rillig   2388: 12. Programming in Makefiles
1.1       dsieger  2389: 
1.6       rillig   2390:     12.1. Caveats
                   2391:     12.2. Makefile variables
1.1       dsieger  2392: 
1.6       rillig   2393:         12.2.1. Naming conventions
1.1       dsieger  2394: 
1.6       rillig   2395:     12.3. Code snippets
1.1       dsieger  2396: 
1.6       rillig   2397:         12.3.1. Adding things to a list
1.117     sevan    2398:         12.3.2. Echoing a string exactly as-is
1.108     rillig   2399:         12.3.3. Passing CFLAGS to GNU configure scripts
                   2400:         12.3.4. Handling possibly empty variables
1.1       dsieger  2401: 
1.6       rillig   2402: 13. PLIST issues
1.1       dsieger  2403: 
1.6       rillig   2404:     13.1. RCS ID
                   2405:     13.2. Semi-automatic PLIST generation
                   2406:     13.3. Tweaking output of make print-PLIST
                   2407:     13.4. Variable substitution in PLIST
                   2408:     13.5. Man page compression
                   2409:     13.6. Changing PLIST source with PLIST_SRC
                   2410:     13.7. Platform-specific and differing PLISTs
1.86      wiz      2411:     13.8. Build-specific PLISTs
                   2412:     13.9. Sharing directories between packages
1.1       dsieger  2413: 
1.6       rillig   2414: 14. Buildlink methodology
1.1       dsieger  2415: 
1.6       rillig   2416:     14.1. Converting packages to use buildlink3
                   2417:     14.2. Writing buildlink3.mk files
1.1       dsieger  2418: 
1.6       rillig   2419:         14.2.1. Anatomy of a buildlink3.mk file
1.27      wiz      2420:         14.2.2. Updating BUILDLINK_API_DEPENDS.pkg and BUILDLINK_ABI_DEPENDS.
                   2421:             pkg in buildlink3.mk files
1.1       dsieger  2422: 
1.6       rillig   2423:     14.3. Writing builtin.mk files
1.1       dsieger  2424: 
1.6       rillig   2425:         14.3.1. Anatomy of a builtin.mk file
                   2426:         14.3.2. Global preferences for native or pkgsrc software
1.1       dsieger  2427: 
1.6       rillig   2428: 15. The pkginstall framework
1.1       dsieger  2429: 
1.6       rillig   2430:     15.1. Files and directories outside the installation prefix
1.1       dsieger  2431: 
1.6       rillig   2432:         15.1.1. Directory manipulation
                   2433:         15.1.2. File manipulation
1.1       dsieger  2434: 
1.6       rillig   2435:     15.2. Configuration files
1.1       dsieger  2436: 
1.6       rillig   2437:         15.2.1. How PKG_SYSCONFDIR is set
                   2438:         15.2.2. Telling the software where configuration files are
                   2439:         15.2.3. Patching installations
                   2440:         15.2.4. Disabling handling of configuration files
1.1       dsieger  2441: 
1.6       rillig   2442:     15.3. System startup scripts
1.1       dsieger  2443: 
1.6       rillig   2444:         15.3.1. Disabling handling of system startup scripts
1.1       dsieger  2445: 
1.6       rillig   2446:     15.4. System users and groups
                   2447:     15.5. System shells
1.1       dsieger  2448: 
1.6       rillig   2449:         15.5.1. Disabling shell registration
1.1       dsieger  2450: 
1.6       rillig   2451:     15.6. Fonts
1.1       dsieger  2452: 
1.6       rillig   2453:         15.6.1. Disabling automatic update of the fonts databases
1.1       dsieger  2454: 
1.6       rillig   2455: 16. Options handling
1.1       dsieger  2456: 
1.6       rillig   2457:     16.1. Global default options
                   2458:     16.2. Converting packages to use bsd.options.mk
                   2459:     16.3. Option Names
1.7       rillig   2460:     16.4. Determining the options of dependencies
1.1       dsieger  2461: 
1.6       rillig   2462: 17. The build process
1.1       dsieger  2463: 
1.6       rillig   2464:     17.1. Introduction
                   2465:     17.2. Program location
                   2466:     17.3. Directories used during the build process
                   2467:     17.4. Running a phase
                   2468:     17.5. The fetch phase
1.1       dsieger  2469: 
1.6       rillig   2470:         17.5.1. What to fetch and where to get it from
                   2471:         17.5.2. How are the files fetched?
1.1       dsieger  2472: 
1.6       rillig   2473:     17.6. The checksum phase
                   2474:     17.7. The extract phase
                   2475:     17.8. The patch phase
                   2476:     17.9. The tools phase
                   2477:     17.10. The wrapper phase
                   2478:     17.11. The configure phase
                   2479:     17.12. The build phase
                   2480:     17.13. The test phase
                   2481:     17.14. The install phase
                   2482:     17.15. The package phase
                   2483:     17.16. Cleaning up
                   2484:     17.17. Other helpful targets
1.1       dsieger  2485: 
1.6       rillig   2486: 18. Tools needed for building or running
1.1       dsieger  2487: 
1.6       rillig   2488:     18.1. Tools for pkgsrc builds
                   2489:     18.2. Tools needed by packages
                   2490:     18.3. Tools provided by platforms
1.1       dsieger  2491: 
1.6       rillig   2492: 19. Making your package work
1.1       dsieger  2493: 
1.6       rillig   2494:     19.1. General operation
1.1       dsieger  2495: 
1.108     rillig   2496:         19.1.1. How to pull in user-settable variables from mk.conf
                   2497:         19.1.2. User interaction
                   2498:         19.1.3. Handling licenses
                   2499:         19.1.4. Restricted packages
                   2500:         19.1.5. Handling dependencies
                   2501:         19.1.6. Handling conflicts with other packages
                   2502:         19.1.7. Packages that cannot or should not be built
                   2503:         19.1.8. Packages which should not be deleted, once installed
                   2504:         19.1.9. Handling packages with security problems
                   2505:         19.1.10. How to handle incrementing versions when fixing an existing
1.1       dsieger  2506:             package
1.108     rillig   2507:         19.1.11. Substituting variable text in the package files (the SUBST
1.1       dsieger  2508:             framework)
                   2509: 
1.108     rillig   2510:     19.2. The fetch phase
1.1       dsieger  2511: 
1.6       rillig   2512:         19.2.1. Packages whose distfiles aren't available for plain downloading
                   2513:         19.2.2. How to handle modified distfiles with the 'old' name
1.88      tnn      2514:         19.2.3. Packages hosted on github.com
1.1       dsieger  2515: 
1.108     rillig   2516:     19.3. The configure phase
1.1       dsieger  2517: 
1.6       rillig   2518:         19.3.1. Shared libraries - libtool
                   2519:         19.3.2. Using libtool on GNU packages that already support libtool
                   2520:         19.3.3. GNU Autoconf/Automake
                   2521: 
                   2522:     19.4. Programming languages
                   2523: 
                   2524:         19.4.1. C, C++, and Fortran
                   2525:         19.4.2. Java
                   2526:         19.4.3. Packages containing perl scripts
1.41      wiz      2527:         19.4.4. Packages containing shell scripts
                   2528:         19.4.5. Other programming languages
1.6       rillig   2529: 
1.108     rillig   2530:     19.5. The build phase
1.6       rillig   2531: 
                   2532:         19.5.1. Compiling C and C++ code conditionally
                   2533:         19.5.2. How to handle compiler bugs
1.24      wiz      2534:         19.5.3. Undefined reference to "..."
1.6       rillig   2535:         19.5.4. Running out of memory
                   2536: 
1.108     rillig   2537:     19.6. The install phase
1.6       rillig   2538: 
                   2539:         19.6.1. Creating needed directories
                   2540:         19.6.2. Where to install documentation
                   2541:         19.6.3. Installing highscore files
                   2542:         19.6.4. Adding DESTDIR support to packages
                   2543:         19.6.5. Packages with hardcoded paths to other interpreters
                   2544:         19.6.6. Packages installing perl modules
                   2545:         19.6.7. Packages installing info files
                   2546:         19.6.8. Packages installing man pages
1.7       rillig   2547:         19.6.9. Packages installing GConf data files
1.18      mishka   2548:         19.6.10. Packages installing scrollkeeper/rarian data files
1.6       rillig   2549:         19.6.11. Packages installing X11 fonts
                   2550:         19.6.12. Packages installing GTK2 modules
                   2551:         19.6.13. Packages installing SGML or XML data
                   2552:         19.6.14. Packages installing extensions to the MIME database
                   2553:         19.6.15. Packages using intltool
                   2554:         19.6.16. Packages installing startup scripts
                   2555:         19.6.17. Packages installing TeX modules
                   2556:         19.6.18. Packages supporting running binaries in emulation
                   2557:         19.6.19. Packages installing hicolor theme icons
                   2558:         19.6.20. Packages installing desktop files
                   2559: 
                   2560:     19.7. Marking packages as having problems
                   2561: 
                   2562: 20. Debugging
                   2563: 21. Submitting and Committing
                   2564: 
                   2565:     21.1. Submitting binary packages
                   2566:     21.2. Submitting source packages (for non-NetBSD-developers)
                   2567:     21.3. General notes when adding, updating, or removing packages
1.34      wiz      2568:     21.4. Committing: Adding a package to CVS
1.6       rillig   2569:     21.5. Updating a package to a newer version
1.21      snj      2570:     21.6. Renaming a package in pkgsrc
                   2571:     21.7. Moving a package in pkgsrc
1.6       rillig   2572: 
                   2573: 22. Frequently Asked Questions
                   2574: 23. GNOME packaging and porting
                   2575: 
                   2576:     23.1. Meta packages
                   2577:     23.2. Packaging a GNOME application
                   2578:     23.3. Updating GNOME to a newer version
                   2579:     23.4. Patching guidelines
1.1       dsieger  2580: 
1.6       rillig   2581: Chapter 10. Creating a new pkgsrc package from scratch
1.1       dsieger  2582: 
                   2583: Table of Contents
                   2584: 
1.6       rillig   2585: 10.1. Common types of packages
1.1       dsieger  2586: 
1.6       rillig   2587:     10.1.1. Perl modules
1.121     sevan    2588:     10.1.2. KDE3 & KDE4 applications
1.17      imil     2589:     10.1.3. Python modules and programs
1.1       dsieger  2590: 
1.6       rillig   2591: 10.2. Examples
1.1       dsieger  2592: 
1.6       rillig   2593:     10.2.1. How the www/nvu package came into pkgsrc
1.1       dsieger  2594: 
                   2595: When you find a package that is not yet in pkgsrc, you most likely have a URL
                   2596: from where you can download the source code. Starting with this URL, creating a
                   2597: package involves only a few steps.
                   2598: 
                   2599:  1. First, install the packages pkgtools/url2pkg and pkgtools/pkglint.
                   2600: 
                   2601:  2. Then, choose one of the top-level directories as the category in which you
                   2602:     want to place your package. You can also create a directory of your own
                   2603:     (maybe called local). In that category directory, create another directory
                   2604:     for your package and change into it.
                   2605: 
                   2606:  3. Run the program url2pkg, which will ask you for a URL. Enter the URL of the
                   2607:     distribution file (in most cases a .tar.gz file) and watch how the basic
                   2608:     ingredients of your package are created automatically. The distribution
                   2609:     file is extracted automatically to fill in some details in the Makefile
                   2610:     that would otherwise have to be done manually.
                   2611: 
                   2612:  4. Examine the extracted files to determine the dependencies of your package.
                   2613:     Ideally, this is mentioned in some README file, but things may differ. For
                   2614:     each of these dependencies, look where it exists in pkgsrc, and if there is
                   2615:     a file called buildlink3.mk in that directory, add a line to your package
                   2616:     Makefile which includes that file just before the last line. If the
1.26      spz      2617:     buildlink3.mk file does not exist, it must be created first. The
                   2618:     buildlink3.mk file makes sure that the package's include files and
                   2619:     libraries are provided.
                   2620: 
                   2621:     If you just need binaries from a package, add a DEPENDS line to the
                   2622:     Makefile, which specifies the version of the dependency and where it can be
                   2623:     found in pkgsrc. This line should be placed in the third paragraph. If the
1.1       dsieger  2624:     dependency is only needed for building the package, but not when using it,
                   2625:     use BUILD_DEPENDS instead of DEPENDS. Your package may then look like this:
                   2626: 
                   2627:     [...]
                   2628: 
1.66      asau     2629:     BUILD_DEPENDS+= libxslt-[0-9]*:../../textproc/libxslt
1.1       dsieger  2630:     DEPENDS+=       screen-[0-9]*:../../misc/screen
                   2631:     DEPENDS+=       screen>=4.0:../../misc/screen
                   2632: 
                   2633:     [...]
                   2634: 
                   2635:     .include "../../category/package/buildlink3.mk"
                   2636:     .include "../../devel/glib2/buildlink3.mk"
                   2637:     .include "../../mk/bsd.pkg.mk"
                   2638: 
                   2639:  5. Run pkglint to see what things still need to be done to make your package a
                   2640:     "good" one. If you don't know what pkglint's warnings want to tell you, try
                   2641:     pkglint --explain or pkglint -e, which outputs additional explanations.
                   2642: 
                   2643:  6. In many cases the package is not yet ready to build. You can find
1.6       rillig   2644:     instructions for the most common cases in the next section, Section 10.1,
1.1       dsieger  2645:     "Common types of packages". After you have followed the instructions over
                   2646:     there, you can hopefully continue here.
                   2647: 
                   2648:  7. Run bmake clean to clean the working directory from the extracted files.
                   2649:     Besides these files, a lot of cache files and other system information has
                   2650:     been saved in the working directory, which may become wrong after you
                   2651:     edited the Makefile.
                   2652: 
                   2653:  8. Now, run bmake to build the package. For the various things that can go
1.6       rillig   2654:     wrong in this phase, consult Chapter 19, Making your package work.
1.1       dsieger  2655: 
1.25      wiz      2656:  9. When the package builds fine, the next step is to install the package. Run 
1.1       dsieger  2657:     bmake install and hope that everything works.
                   2658: 
                   2659: 10. Up to now, the file PLIST, which contains a list of the files that are
                   2660:     installed by the package, is nearly empty. Run bmake print-PLIST >PLIST to
                   2661:     generate a probably correct list. Check the file using your preferred text
                   2662:     editor to see if the list of files looks plausible.
                   2663: 
                   2664: 11. Run pkglint again to see if the generated PLIST contains garbage or not.
                   2665: 
                   2666: 12. When you ran bmake install, the package has been registered in the database
                   2667:     of installed files, but with an empty list of files. To fix this, run bmake
                   2668:     deinstall and bmake install again. Now the package is registered with the
                   2669:     list of files from PLIST.
                   2670: 
                   2671: 13. Run bmake package to create a binary package from the set of installed
                   2672:     files.
                   2673: 
1.6       rillig   2674: 10.1. Common types of packages
1.1       dsieger  2675: 
1.6       rillig   2676: 10.1.1. Perl modules
1.1       dsieger  2677: 
                   2678: Simple Perl modules are handled automatically by url2pkg, including
                   2679: dependencies.
                   2680: 
1.121     sevan    2681: 10.1.2. KDE3 & KDE4 applications
1.1       dsieger  2682: 
1.66      asau     2683: KDE3 applications should always include meta-pkgs/kde3/kde3.mk, which contains
1.121     sevan    2684: numerous settings that are typical of KDE3 packages and KDE4 applications
                   2685: should always include meta-pkgs/kde4/kde4.mk, respectively.
1.1       dsieger  2686: 
1.17      imil     2687: 10.1.3. Python modules and programs
                   2688: 
                   2689: Python modules and programs packages are easily created using a set of
                   2690: predefined variables.
                   2691: 
1.63      wiz      2692: If some Python versions are not supported by the software, set the
                   2693: PYTHON_VERSIONS_INCOMPATIBLE variable to the Python versions that are not
                   2694: supported, e.g.
1.17      imil     2695: 
1.93      sevan    2696: PYTHON_VERSIONS_INCOMPATIBLE=       27
1.17      imil     2697: 
1.103     wiz      2698: If the packaged software is a Python module, include one of ../../lang/python/
                   2699: egg.mk, ../../lang/python/distutils.mk, or ../../lang/python/extension.mk.
                   2700: 
                   2701: Most Python packages use either "distutils" or easy-setup/setuptools ("eggs").
                   2702: if the packaged software is using setuptools, you only need to include "../../
                   2703: lang/python/egg.mk". Otherwise, if the software uses "distutils", include "..
                   2704: /../lang/python/distutils.mk". so pkgsrc will use this framework. "distutils"
                   2705: uses a script called setup.py, if the "distutils" driver is not called
                   2706: setup.py, set the PYSETUP variable to the name of the script.
                   2707: 
                   2708: Either way, the package directory should be called "py-software" and PKGNAME
                   2709: should be set to "${PYPKGPREFIX}-${DISTNAME}", e.g.
1.17      imil     2710: 
                   2711: DISTNAME=   foopymodule-1.2.10
                   2712: PKGNAME=    ${PYPKGPREFIX}-${DISTNAME}
                   2713: 
1.63      wiz      2714: If it is an application, include "../../lang/python/application.mk". In order
                   2715: to correctly set the path to the Python interpreter, use the REPLACE_PYTHON
                   2716: variable and set it to the list of files (paths relative to WRKSRC) that must
                   2717: be corrected. For example:
1.17      imil     2718: 
1.63      wiz      2719: REPLACE_PYTHON=   *.py
1.17      imil     2720: 
1.63      wiz      2721: Some Python modules have separate distributions for Python-2.x and Python-3.x
                   2722: support. In pkgsrc this is handled by the versioned_dependencies.mk file. Set
                   2723: PYTHON_VERSIONED_DEPENDENCIES to the list of packages that should be depended
                   2724: upon and include "../../lang/python/versioned_dependencies.mk", then the pkgsrc
                   2725: infrastructure will depend on the appropriate package version. For example:
1.17      imil     2726: 
1.123     wiz      2727: PYTHON_VERSIONED_DEPENDENCIES=gobject
1.63      wiz      2728: 
                   2729: Look inside versioned_dependencies.mk for a list of supported packages.
1.17      imil     2730: 
1.6       rillig   2731: 10.2. Examples
1.1       dsieger  2732: 
1.6       rillig   2733: 10.2.1. How the www/nvu package came into pkgsrc
1.1       dsieger  2734: 
1.6       rillig   2735: 10.2.1.1. The initial package
1.1       dsieger  2736: 
                   2737: Looking at the file pkgsrc/doc/TODO, I saw that the "nvu" package has not yet
                   2738: been imported into pkgsrc. As the description says it has to do with the web,
                   2739: the obvious choice for the category is "www".
                   2740: 
                   2741: $ mkdir www/nvu
                   2742: $ cd www/nvu
                   2743: 
                   2744: The web site says that the sources are available as a tar file, so I fed that
                   2745: URL to the url2pkg program:
                   2746: 
                   2747: $ url2pkg http://cvs.nvu.com/download/nvu-1.0-sources.tar.bz2
                   2748: 
                   2749: My editor popped up, and I added a PKGNAME line below the DISTNAME line, as the
                   2750: package name should not have the word "sources" in it. I also filled in the
                   2751: MAINTAINER, HOMEPAGE and COMMENT fields. Then the package Makefile looked like
                   2752: that:
                   2753: 
1.121     sevan    2754: # $NetBSD $
1.1       dsieger  2755: #
                   2756: 
                   2757: DISTNAME=       nvu-1.0-sources
                   2758: PKGNAME=        nvu-1.0
                   2759: CATEGORIES=     www
                   2760: MASTER_SITES=   http://cvs.nvu.com/download/
                   2761: EXTRACT_SUFX=   .tar.bz2
                   2762: 
                   2763: MAINTAINER=     rillig@NetBSD.org
                   2764: HOMEPAGE=       http://cvs.nvu.com/
                   2765: COMMENT=        Web Authoring System
                   2766: 
                   2767: # url2pkg-marker (please do not remove this line.)
                   2768: .include "../../mk/bsd.pkg.mk"
                   2769: 
1.124     wiz      2770: On the first line of output above, an artificial space has been added between
1.121     sevan    2771: NetBSD and $, this is a workaround to prevent CVS expanding to the filename of
                   2772: the guide.
                   2773: 
1.1       dsieger  2774: Then, I quit the editor and watched pkgsrc downloading a large source archive:
                   2775: 
                   2776: url2pkg> Running "make makesum" ...
                   2777: => Required installed package digest>=20010302: digest-20060826 found
                   2778: => Fetching nvu-1.0-sources.tar.bz2
                   2779: Requesting http://cvs.nvu.com/download/nvu-1.0-sources.tar.bz2
                   2780: 100% |*************************************| 28992 KB  150.77 KB/s00:00 ETA
                   2781: 29687976 bytes retrieved in 03:12 (150.77 KB/s)
                   2782: url2pkg> Running "make extract" ...
                   2783: => Required installed package digest>=20010302: digest-20060826 found
                   2784: => Checksum SHA1 OK for nvu-1.0-sources.tar.bz2
                   2785: => Checksum RMD160 OK for nvu-1.0-sources.tar.bz2
                   2786: work.bacc -> /tmp/roland/pkgsrc/www/nvu/work.bacc
                   2787: ===> Installing dependencies for nvu-1.0
                   2788: ===> Overriding tools for nvu-1.0
                   2789: ===> Extracting for nvu-1.0
                   2790: url2pkg> Adjusting the Makefile.
                   2791: 
                   2792: Remember to correct CATEGORIES, HOMEPAGE, COMMENT, and DESCR when you're done!
                   2793: 
                   2794: Good luck! (See pkgsrc/doc/pkgsrc.txt for some more help :-)
                   2795: 
1.6       rillig   2796: 10.2.1.2. Fixing all kinds of problems to make the package work
1.1       dsieger  2797: 
                   2798: Now that the package has been extracted, let's see what's inside it. The
                   2799: package has a README.txt, but that only says something about mozilla, so it's
                   2800: probably useless for seeing what dependencies this package has. But since there
                   2801: is a GNU configure script in the package, let's hope that it will complain
                   2802: about everything it needs.
                   2803: 
                   2804: $ bmake
                   2805: => Required installed package digest>=20010302: digest-20060826 found
                   2806: => Checksum SHA1 OK for nvu-1.0-sources.tar.bz2
                   2807: => Checksum RMD160 OK for nvu-1.0-sources.tar.bz2
                   2808: ===> Patching for nvu-1.0
                   2809: ===> Creating toolchain wrappers for nvu-1.0
                   2810: ===> Configuring for nvu-1.0
                   2811: [...]
                   2812: configure: error: Perl 5.004 or higher is required.
                   2813: [...]
                   2814: WARNING: Please add USE_TOOLS+=perl to the package Makefile.
                   2815: [...]
                   2816: 
                   2817: That worked quite well. So I opened the package Makefile in my editor, and
                   2818: since it already has a USE_TOOLS line, I just appended "perl" to it. Since the
                   2819: dependencies of the package have changed now, and since a perl wrapper is
                   2820: automatically installed in the "tools" phase, I need to build the package from
                   2821: scratch.
                   2822: 
                   2823: $ bmake clean
                   2824: ===> Cleaning for nvu-1.0
                   2825: $ bmake
                   2826: [...]
                   2827: *** /tmp/roland/pkgsrc/www/nvu/work.bacc/.tools/bin/make is not \
                   2828: GNU Make.  You will not be able to build Mozilla without GNU Make.
                   2829: [...]
                   2830: 
                   2831: So I added "gmake" to the USE_TOOLS line and tried again (from scratch).
                   2832: 
                   2833: [...]
                   2834: checking for GTK - version >= 1.2.0... no
                   2835: *** Could not run GTK test program, checking why...
                   2836: [...]
                   2837: 
                   2838: Now to the other dependencies. The first question is: Where is the GTK package
                   2839: hidden in pkgsrc?
                   2840: 
                   2841: $ echo ../../*/gtk*
                   2842: [many packages ...]
                   2843: $ echo ../../*/gtk
                   2844: ../../x11/gtk
                   2845: $ echo ../../*/gtk2
                   2846: ../../x11/gtk2
                   2847: $ echo ../../*/gtk2/bui*
                   2848: ../../x11/gtk2/buildlink3.mk
                   2849: 
                   2850: The first try was definitely too broad. The second one had exactly one result,
                   2851: which is very good. But there is one pitfall with GNOME packages. Before GNOME
                   2852: 2 had been released, there were already many GNOME 1 packages in pkgsrc. To be
                   2853: able to continue to use these packages, the GNOME 2 packages were imported as
                   2854: separate packages, and their names usually have a "2" appended. So I checked
                   2855: whether this was the case here, and indeed it was.
                   2856: 
                   2857: Since the GTK2 package has a buildlink3.mk file, adding the dependency is very
                   2858: easy. I just inserted an .include line before the last line of the package
                   2859: Makefile, so that it now looks like this:
                   2860: 
                   2861: [...]
                   2862: .include "../../x11/gtk2/buildlink3.mk"
                   2863: .include "../../mk/bsd.pkg.mk
                   2864: 
                   2865: After another bmake clean && bmake, the answer was:
                   2866: 
                   2867: [...]
                   2868: checking for gtk-config... /home/roland/pkg/bin/gtk-config
                   2869: checking for GTK - version >= 1.2.0... no
                   2870: *** Could not run GTK test program, checking why...
                   2871: *** The test program failed to compile or link. See the file config.log for the
                   2872: *** exact error that occured. This usually means GTK was incorrectly installed
                   2873: *** or that you have moved GTK since it was installed. In the latter case, you
                   2874: *** may want to edit the gtk-config script: /home/roland/pkg/bin/gtk-config
                   2875: configure: error: Test for GTK failed.
                   2876: [...]
                   2877: 
                   2878: In this particular case, the assumption that "every package prefers GNOME 2"
                   2879: had been wrong. The first of the lines above told me that this package really
                   2880: wanted to have the GNOME 1 version of GTK. If the package had looked for GTK2,
                   2881: it would have looked for pkg-config instead of gtk-config. So I changed the x11
                   2882: /gtk2 to x11/gtk in the package Makefile, and tried again.
                   2883: 
                   2884: [...]
1.59      jnemeth  2885: cc -o xpidl.o -c -DOSTYPE=\"NetBSD3\" -DOSARCH=\"NetBSD\"  [...]
1.1       dsieger  2886: In file included from xpidl.c:42:
                   2887: xpidl.h:53:24: libIDL/IDL.h: No such file or directory
                   2888: In file included from xpidl.c:42:
                   2889: xpidl.h:132: error: parse error before "IDL_ns"
                   2890: [...]
                   2891: 
                   2892: The package still does not find all of its dependencies. Now the question is:
                   2893: Which package provides the libIDL/IDL.h header file?
                   2894: 
                   2895: $ echo ../../*/*idl*
                   2896: ../../devel/py-idle ../../wip/idled ../../x11/acidlaunch
                   2897: $ echo ../../*/*IDL*
                   2898: ../../net/libIDL
                   2899: 
                   2900: Let's take the one from the second try. So I included the ../../net/libIDL/
                   2901: buildlink3.mk file and tried again. But the error didn't change. After digging
                   2902: through some of the code, I concluded that the build process of the package was
                   2903: broken and couldn't have ever worked, but since the Mozilla source tree is
                   2904: quite large, I didn't want to fix it. So I added the following to the package
                   2905: Makefile and tried again:
                   2906: 
                   2907: CPPFLAGS+=              -I${BUILDLINK_PREFIX.libIDL}/include/libIDL-2.0
                   2908: BUILDLINK_TRANSFORM+=   -l:IDL:IDL-2
                   2909: 
                   2910: The latter line is needed because the package expects the library libIDL.so,
                   2911: but only libIDL-2.so is available. So I told the compiler wrapper to rewrite
                   2912: that on the fly.
                   2913: 
                   2914: The next problem was related to a recent change of the FreeType interface. I
                   2915: looked up in www/seamonkey which patch files were relevant for this issue and
                   2916: copied them to the patches directory. Then I retried, fixed the patches so that
                   2917: they applied cleanly and retried again. This time, everything worked.
                   2918: 
1.6       rillig   2919: 10.2.1.3. Installing the package
1.1       dsieger  2920: 
                   2921: $ bmake CHECK_FILES=no install
                   2922: [...]
                   2923: $ bmake print-PLIST >PLIST
                   2924: $ bmake deinstall
                   2925: $ bmake install
                   2926: 
1.6       rillig   2927: Chapter 11. Package components - files, directories and contents
1.1       dsieger  2928: 
                   2929: Table of Contents
                   2930: 
1.6       rillig   2931: 11.1. Makefile
                   2932: 11.2. distinfo
                   2933: 11.3. patches/*
                   2934: 
                   2935:     11.3.1. Structure of a single patch file
                   2936:     11.3.2. Creating patch files
                   2937:     11.3.3. Sources where the patch files come from
                   2938:     11.3.4. Patching guidelines
                   2939:     11.3.5. Feedback to the author
                   2940: 
                   2941: 11.4. Other mandatory files
                   2942: 11.5. Optional files
                   2943: 
                   2944:     11.5.1. Files affecting the binary package
                   2945:     11.5.2. Files affecting the build process
                   2946:     11.5.3. Files affecting nothing at all
1.1       dsieger  2947: 
1.6       rillig   2948: 11.6. work*
                   2949: 11.7. files/*
1.1       dsieger  2950: 
                   2951: Whenever you're preparing a package, there are a number of files involved which
                   2952: are described in the following sections.
                   2953: 
1.6       rillig   2954: 11.1. Makefile
1.1       dsieger  2955: 
                   2956: Building, installation and creation of a binary package are all controlled by
                   2957: the package's Makefile. The Makefile describes various things about a package,
                   2958: for example from where to get it, how to configure, build, and install it.
                   2959: 
                   2960: A package Makefile contains several sections that describe the package.
                   2961: 
                   2962: In the first section there are the following variables, which should appear
                   2963: exactly in the order given here. The order and grouping of the variables is
                   2964: mostly historical and has no further meaning.
                   2965: 
                   2966:   * DISTNAME is the basename of the distribution file to be downloaded from the
                   2967:     package's website.
                   2968: 
1.66      asau     2969:   * PKGNAME is the name of the package, as used by pkgsrc. You need to provide
                   2970:     it if DISTNAME (which is the default) is not a good name for the package in
                   2971:     pkgsrc or DISTNAME is not provided (no distribution file is required).
                   2972:     Usually it is the pkgsrc directory name together with the version number.
                   2973:     It must match the regular expression ^[A-Za-z0-9][A-Za-z0-9-_.+]*$, that
                   2974:     is, it starts with a letter or digit, and contains only letters, digits,
                   2975:     dashes, underscores, dots and plus signs.
1.1       dsieger  2976: 
                   2977:   * CATEGORIES is a list of categories which the package fits in. You can
                   2978:     choose any of the top-level directories of pkgsrc for it.
                   2979: 
                   2980:     Currently the following values are available for CATEGORIES. If more than
                   2981:     one is used, they need to be separated by spaces:
                   2982: 
                   2983:     archivers     cross         geography     meta-pkgs     security
                   2984:     audio         databases     graphics      misc          shells
                   2985:     benchmarks    devel         ham           multimedia    sysutils
                   2986:     biology       editors       inputmethod   net           textproc
                   2987:     cad           emulators     lang          news          time
                   2988:     chat          finance       mail          parallel      wm
                   2989:     comms         fonts         math          pkgtools      www
                   2990:     converters    games         mbone         print         x11
                   2991: 
                   2992:   * MASTER_SITES, DYNAMIC_MASTER_SITES, DIST_SUBDIR, EXTRACT_SUFX and DISTFILES
1.6       rillig   2993:     are discussed in detail in Section 17.5, "The fetch phase".
1.1       dsieger  2994: 
                   2995: The second section contains information about separately downloaded patches, if
                   2996: any.
                   2997: 
                   2998:   * PATCHFILES: Name(s) of additional files that contain distribution patches.
                   2999:     There is no default. pkgsrc will look for them at PATCH_SITES. They will
                   3000:     automatically be uncompressed before patching if the names end with .gz or
                   3001:     .Z.
                   3002: 
                   3003:   * PATCH_SITES: Primary location(s) for distribution patch files (see
1.80      wiz      3004:     PATCHFILES above) if not found locally.
                   3005: 
                   3006:   * PATCH_DIST_STRIP: an argument to patch(1) that sets the pathname strip
                   3007:     count to help find the correct files to patch. It defaults to -p0.
1.1       dsieger  3008: 
                   3009: The third section contains the following variables.
                   3010: 
                   3011:   * MAINTAINER is the email address of the person who feels responsible for
                   3012:     this package, and who is most likely to look at problems or questions
                   3013:     regarding this package which have been reported with send-pr(1). Other
1.14      jmcneill 3014:     developers may contact the MAINTAINER before making changes to the package,
                   3015:     but are not required to do so. When packaging a new program, set MAINTAINER
                   3016:     to yourself. If you really can't maintain the package for future updates,
                   3017:     set it to <pkgsrc-users@NetBSD.org>.
                   3018: 
                   3019:   * OWNER should be used instead of MAINTAINER when you do not want other
                   3020:     developers to update or change the package without contacting you first. A
                   3021:     package Makefile should contain one of MAINTAINER or OWNER, but not both.
1.1       dsieger  3022: 
                   3023:   * HOMEPAGE is a URL where users can find more information about the package.
                   3024: 
                   3025:   * COMMENT is a one-line description of the package (should not include the
                   3026:     package name).
                   3027: 
1.122     leot     3028:   * LICENSE indicates the license(s) applicable for the package. See
                   3029:     Section 19.1.3, "Handling licenses" for further details.
                   3030: 
1.1       dsieger  3031: Other variables that affect the build:
                   3032: 
                   3033:   * WRKSRC: The directory where the interesting distribution files of the
                   3034:     package are found. The default is ${WRKDIR}/${DISTNAME}, which works for
                   3035:     most packages.
                   3036: 
                   3037:     If a package doesn't create a subdirectory for itself (most GNU software
                   3038:     does, for instance), but extracts itself in the current directory, you
                   3039:     should set WRKSRC=${WRKDIR}.
                   3040: 
                   3041:     If a package doesn't create a subdirectory with the name of DISTNAME but
                   3042:     some different name, set WRKSRC to point to the proper name in ${WRKDIR},
                   3043:     for example WRKSRC=${WRKDIR}/${DISTNAME}/unix. See lang/tcl and x11/tk for
                   3044:     other examples.
                   3045: 
                   3046:     The name of the working directory created by pkgsrc is taken from the
                   3047:     WRKDIR_BASENAME variable. By default, its value is work. If you want to use
                   3048:     the same pkgsrc tree for building different kinds of binary packages, you
                   3049:     can change the variable according to your needs. Two other variables handle
                   3050:     common cases of setting WRKDIR_BASENAME individually. If OBJHOSTNAME is
1.4       rillig   3051:     defined in mk.conf, the first component of the host's name is attached to
                   3052:     the directory name. If OBJMACHINE is defined, the platform name is
1.1       dsieger  3053:     attached, which might look like work.i386 or work.sparc.
                   3054: 
                   3055: Please pay attention to the following gotchas:
                   3056: 
                   3057:   * Add MANCOMPRESSED if man pages are installed in compressed form by the
                   3058:     package. For packages using BSD-style makefiles which honor MANZ, there is
                   3059:     MANCOMPRESSED_IF_MANZ.
                   3060: 
                   3061:   * Replace /usr/local with "${PREFIX}" in all files (see patches, below).
                   3062: 
1.6       rillig   3063:   * If the package installs any info files, see Section 19.6.7, "Packages
1.1       dsieger  3064:     installing info files".
                   3065: 
1.6       rillig   3066: 11.2. distinfo
1.1       dsieger  3067: 
                   3068: The distinfo file contains the message digest, or checksum, of each distfile
                   3069: needed for the package. This ensures that the distfiles retrieved from the
                   3070: Internet have not been corrupted during transfer or altered by a malign force
1.108     rillig   3071: to introduce a security hole. To provide maximum security, all distfiles are
                   3072: protected using three different message digest algorithms (SHA1, RMD160,
                   3073: SHA512), as well as the file size.
1.1       dsieger  3074: 
                   3075: The distinfo file also contains the checksums for all the patches found in the
1.6       rillig   3076: patches directory (see Section 11.3, "patches/*").
1.1       dsieger  3077: 
1.108     rillig   3078: To regenerate the distinfo file, use the make distinfo command.
1.1       dsieger  3079: 
                   3080: Some packages have different sets of distfiles depending on the platform, for
1.24      wiz      3081: example lang/openjdk7. These are kept in the same distinfo file and care should
                   3082: be taken when upgrading such a package to ensure distfile information is not
                   3083: lost.
1.1       dsieger  3084: 
1.6       rillig   3085: 11.3. patches/*
1.1       dsieger  3086: 
1.108     rillig   3087: Some packages don't work out-of-the box on the various platforms that are
                   3088: supported by pkgsrc. These packages need to be patched to make them work. The
                   3089: patch files can be found in the patches/ directory.
1.1       dsieger  3090: 
                   3091: In the patch phase, these patches are applied to the files in WRKSRC directory
1.25      wiz      3092: after extracting them, in alphabetic order.
1.1       dsieger  3093: 
1.6       rillig   3094: 11.3.1. Structure of a single patch file
1.1       dsieger  3095: 
                   3096: The patch-* files should be in diff -bu format, and apply without a fuzz to
                   3097: avoid problems. (To force patches to apply with fuzz you can set
                   3098: PATCH_FUZZ_FACTOR=-F2). Furthermore, each patch should contain only changes for
                   3099: a single file, and no file should be patched by more than one patch file. This
                   3100: helps to keep future modifications simple.
                   3101: 
                   3102: Each patch file is structured as follows: In the first line, there is the RCS
                   3103: Id of the patch itself. The second line should be empty for aesthetic reasons.
                   3104: After that, there should be a comment for each change that the patch does.
                   3105: There are a number of standard cases:
                   3106: 
                   3107:   * Patches for commonly known vulnerabilities should mention the vulnerability
                   3108:     ID (CAN, CVE).
                   3109: 
                   3110:   * Patches that change source code should mention the platform and other
                   3111:     environment (for example, the compiler) that the patch is needed for.
                   3112: 
1.108     rillig   3113: The patch should be commented so that any developer who knows the code of the
                   3114: application can make some use of the patch. Special care should be taken for
                   3115: the upstream developers, since we generally want that they accept our patches,
                   3116: so we have less work in the future.
1.1       dsieger  3117: 
1.6       rillig   3118: 11.3.2. Creating patch files
1.1       dsieger  3119: 
                   3120: One important thing to mention is to pay attention that no RCS IDs get stored
                   3121: in the patch files, as these will cause problems when later checked into the
                   3122: NetBSD CVS tree. Use the pkgdiff command from the pkgtools/pkgdiff package to
                   3123: avoid these problems.
                   3124: 
                   3125: For even more automation, we recommend using mkpatches from the same package to
                   3126: make a whole set of patches. You just have to backup files before you edit them
1.25      wiz      3127: to filename.orig, e.g. with cp -p filename filename.orig or, easier, by using 
1.1       dsieger  3128: pkgvi again from the same package. If you upgrade a package this way, you can
1.25      wiz      3129: easily compare the new set of patches with the previously existing one with 
                   3130: patchdiff. The files in patches are replaced by new files, so carefully check
                   3131: if you want to take all the changes.
1.1       dsieger  3132: 
                   3133: When you have finished a package, remember to generate the checksums for the
1.6       rillig   3134: patch files by using the make makepatchsum command, see Section 11.2,
1.1       dsieger  3135: "distinfo".
                   3136: 
                   3137: When adding a patch that corrects a problem in the distfile (rather than e.g.
                   3138: enforcing pkgsrc's view of where man pages should go), send the patch as a bug
                   3139: report to the maintainer. This benefits non-pkgsrc users of the package, and
                   3140: usually makes it possible to remove the patch in future version.
                   3141: 
1.25      wiz      3142: The file names of the patch files are usually of the form patch-
                   3143: path_to_file__with__underscores.c. Many packages still use the previous
                   3144: convention patch-[a-z][a-z], but new patches should be of the form containing
                   3145: the filename. mkpatches included in pkgtools/pkgdiff takes care of the name
                   3146: automatically.
1.2       rillig   3147: 
1.6       rillig   3148: 11.3.3. Sources where the patch files come from
1.1       dsieger  3149: 
                   3150: If you want to share patches between multiple packages in pkgsrc, e.g. because
                   3151: they use the same distfiles, set PATCHDIR to the path where the patch files can
                   3152: be found, e.g.:
                   3153: 
                   3154: PATCHDIR= ${.CURDIR}/../xemacs/patches
                   3155: 
                   3156: Patch files that are distributed by the author or other maintainers can be
                   3157: listed in PATCHFILES.
                   3158: 
                   3159: If it is desired to store any patches that should not be committed into pkgsrc,
                   3160: they can be kept outside the pkgsrc tree in the $LOCALPATCHES directory. The
                   3161: directory tree there is expected to have the same "category/package" structure
                   3162: as pkgsrc, and patches are expected to be stored inside these dirs (also known
                   3163: as $LOCALPATCHES/$PKGPATH). For example, if you want to keep a private patch
                   3164: for pkgsrc/graphics/png, keep it in $LOCALPATCHES/graphics/png/mypatch. All
                   3165: files in the named directory are expected to be patch files, and they are
                   3166: applied after pkgsrc patches are applied.
                   3167: 
1.6       rillig   3168: 11.3.4. Patching guidelines
1.1       dsieger  3169: 
                   3170: When fixing a portability issue in the code do not use preprocessor magic to
                   3171: check for the current operating system nor platform. Doing so hurts portability
                   3172: to other platforms because the OS-specific details are not abstracted
                   3173: appropriately.
                   3174: 
                   3175: The general rule to follow is: instead of checking for the operating system the
                   3176: application is being built on, check for the specific features you need. For
                   3177: example, instead of assuming that kqueue is available under NetBSD and using
                   3178: the __NetBSD__ macro to conditionalize kqueue support, add a check that detects
                   3179: kqueue itself ? yes, this generally involves patching the configure script.
                   3180: There is absolutely nothing that prevents some OSes from adopting interfaces
                   3181: from other OSes (e.g. Linux implementing kqueue), something that the above
                   3182: checks cannot take into account.
                   3183: 
                   3184: Of course, checking for features generally involves more work on the
                   3185: developer's side, but the resulting changes are cleaner and there are chances
                   3186: they will work on many other platforms. Not to mention that there are higher
                   3187: chances of being later integrated into the mainstream sources. Remember: It
                   3188: doesn't work unless it is right!
                   3189: 
                   3190: Some typical examples:
                   3191: 
1.6       rillig   3192: Table 11.1. Patching examples
1.1       dsieger  3193: 
                   3194: +-------------------------------------------------------------------------------------------+
                   3195: |  Where  |        Incorrect         |                       Correct                        |
                   3196: |---------+--------------------------+------------------------------------------------------|
                   3197: |         |case ${target_os} in      |                                                      |
                   3198: |configure|netbsd*) have_kvm=yes ;;  |AC_CHECK_LIB(kvm, kvm_open, have_kvm=yes, have_kvm=no)|
                   3199: |script   |*)       have_kvm=no  ;;  |                                                      |
                   3200: |         |esac                      |                                                      |
                   3201: |---------+--------------------------+------------------------------------------------------|
1.2       rillig   3202: |C source |#if defined(__NetBSD__)   |#if defined(HAVE_SYS_EVENT_H)                         |
                   3203: |file     |#  include <sys/event.h>  |#  include <sys/event.h>                              |
                   3204: |         |#endif                    |#endif                                                |
1.1       dsieger  3205: |---------+--------------------------+------------------------------------------------------|
                   3206: |         |int                       |int                                                   |
                   3207: |         |monitor_file(...)         |monitor_file(...)                                     |
                   3208: |         |{                         |{                                                     |
                   3209: |         |#if defined(__NetBSD__)   |#if defined(HAVE_KQUEUE)                              |
                   3210: |C source |        int fd = kqueue();|        int fd = kqueue();                            |
                   3211: |file     |        ...               |        ...                                           |
                   3212: |         |#else                     |#else                                                 |
                   3213: |         |        ...               |        ...                                           |
                   3214: |         |#endif                    |#endif                                                |
                   3215: |         |}                         |}                                                     |
                   3216: +-------------------------------------------------------------------------------------------+
                   3217: 
                   3218: 
                   3219: For more information, please read the Making packager-friendly software article
                   3220: (part 1, part 2). It summarizes multiple details on how to make software easier
                   3221: to package; all the suggestions in it were collected from our experience in
                   3222: pkgsrc work, so they are possibly helpful when creating patches too.
                   3223: 
1.6       rillig   3224: 11.3.5. Feedback to the author
1.1       dsieger  3225: 
                   3226: Always, always, always feed back any portability fixes or improvements you do
                   3227: to a package to the mainstream developers. This is the only way to get their
                   3228: attention on portability issues and to ensure that future versions can be built
                   3229: out-of-the box on NetBSD. Furthermore, any user that gets newer distfiles will
                   3230: get the fixes straight from the packaged code.
                   3231: 
                   3232: This generally involves cleaning up the patches (because sometimes the patches
1.41      wiz      3233: that are added to pkgsrc are quick hacks), filing bug reports in the
1.1       dsieger  3234: appropriate trackers for the projects and working with the mainstream authors
                   3235: to accept your changes. It is extremely important that you do it so that the
                   3236: packages in pkgsrc are kept simple and thus further changes can be done without
                   3237: much hassle.
                   3238: 
1.25      wiz      3239: When you have done this, please add a URL to the upstream bug report to the
                   3240: patch comment.
                   3241: 
1.1       dsieger  3242: Support the idea of free software!
                   3243: 
1.6       rillig   3244: 11.4. Other mandatory files
1.1       dsieger  3245: 
                   3246: DESCR
                   3247: 
                   3248:     A multi-line description of the piece of software. This should include any
                   3249:     credits where they are due. Please bear in mind that others do not share
                   3250:     your sense of humour (or spelling idiosyncrasies), and that others will
                   3251:     read everything that you write here.
                   3252: 
                   3253: PLIST
                   3254: 
                   3255:     This file governs the files that are installed on your system: all the
                   3256:     binaries, manual pages, etc. There are other directives which may be
                   3257:     entered in this file, to control the creation and deletion of directories,
1.6       rillig   3258:     and the location of inserted files. See Chapter 13, PLIST issues for more
1.1       dsieger  3259:     information.
                   3260: 
1.6       rillig   3261: 11.5. Optional files
1.1       dsieger  3262: 
1.6       rillig   3263: 11.5.1. Files affecting the binary package
1.1       dsieger  3264: 
                   3265: INSTALL
                   3266: 
                   3267:     This shell script is invoked twice by pkg_add(1). First time after package
                   3268:     extraction and before files are moved in place, the second time after the
                   3269:     files to install are moved in place. This can be used to do any custom
                   3270:     procedures not possible with @exec commands in PLIST. See pkg_add(1) and
1.6       rillig   3271:     pkg_create(1) for more information. See also Section 15.1, "Files and
1.29      wiz      3272:     directories outside the installation prefix". Please note that you can
                   3273:     modify variables in it easily by using FILES_SUBST in the package's
                   3274:     Makefile:
                   3275: 
                   3276:     FILES_SUBST+=  SOMEVAR="somevalue"
                   3277: 
                   3278:     replaces "@SOMEVAR@" with "somevalue" in the INSTALL. By default,
                   3279:     substitution is performed for PREFIX, LOCALBASE, X11BASE, VARBASE, and a
                   3280:     few others, type make help topic=FILES_SUBST for a complete list.
1.1       dsieger  3281: 
                   3282: DEINSTALL
                   3283: 
                   3284:     This script is executed before and after any files are removed. It is this
                   3285:     script's responsibility to clean up any additional messy details around the
                   3286:     package's installation, since all pkg_delete knows is how to delete the
                   3287:     files created in the original distribution. See pkg_delete(1) and
1.29      wiz      3288:     pkg_create(1) for more information. The same methods to replace variables
                   3289:     can be used as for the INSTALL file.
1.1       dsieger  3290: 
                   3291: MESSAGE
                   3292: 
                   3293:     This file is displayed after installation of the package. Useful for things
                   3294:     like legal notices on almost-free software and hints for updating config
                   3295:     files after installing modules for apache, PHP etc. Please note that you
                   3296:     can modify variables in it easily by using MESSAGE_SUBST in the package's
                   3297:     Makefile:
                   3298: 
                   3299:     MESSAGE_SUBST+=  SOMEVAR="somevalue"
                   3300: 
                   3301:     replaces "${SOMEVAR}" with "somevalue" in MESSAGE. By default, substitution
1.99      sevan    3302:     is performed for PKGNAME, PKGBASE, PREFIX, LOCALBASE, X11BASE,
1.16      jnemeth  3303:     PKG_SYSCONFDIR, ROOT_GROUP, and ROOT_USER.
1.1       dsieger  3304: 
                   3305:     You can display a different or additional files by setting the MESSAGE_SRC
                   3306:     variable. Its default is MESSAGE, if the file exists.
                   3307: 
                   3308: ALTERNATIVES
                   3309: 
1.66      asau     3310:     This file is used by the alternatives framework. It creates, configures,
                   3311:     and destroys generic wrappers used to run programs with similar interfaces.
                   3312:     See pkg_alternatives(8) from pkgtools/pkg_alternatives for more
                   3313:     information.
                   3314: 
                   3315:     Each line of the file contains two filenames, first the wrapper and then
                   3316:     the alternative provided by the package. Both paths are relative to PREFIX.
1.1       dsieger  3317: 
1.6       rillig   3318: 11.5.2. Files affecting the build process
1.1       dsieger  3319: 
                   3320: Makefile.common
                   3321: 
                   3322:     This file contains arbitrary things that could also go into a Makefile, but
                   3323:     its purpose is to be used by more than one package. This file should only
                   3324:     be used when the packages that will use the file are known in advance. For
                   3325:     other purposes it is often better to write a *.mk file and give it a good
                   3326:     name that describes what it does.
                   3327: 
                   3328: buildlink3.mk
                   3329: 
                   3330:     This file contains the dependency information for the buildlink3 framework
1.6       rillig   3331:     (see Chapter 14, Buildlink methodology).
1.1       dsieger  3332: 
                   3333: hacks.mk
                   3334: 
                   3335:     This file contains workarounds for compiler bugs and similar things. It is
                   3336:     included automatically by the pkgsrc infrastructure, so you don't need an
                   3337:     extra .include line for it.
                   3338: 
                   3339: options.mk
                   3340: 
                   3341:     This file contains the code for the package-specific options (see
1.6       rillig   3342:     Chapter 16, Options handling) that can be selected by the user. If a
1.1       dsieger  3343:     package has only one or two options, it is equally acceptable to put the
                   3344:     code directly into the Makefile.
                   3345: 
1.6       rillig   3346: 11.5.3. Files affecting nothing at all
1.1       dsieger  3347: 
                   3348: README*
                   3349: 
                   3350:     These files do not take place in the creation of a package and thus are
                   3351:     purely informative to the package developer.
                   3352: 
                   3353: TODO
                   3354: 
                   3355:     This file contains things that need to be done to make the package even
                   3356:     better.
                   3357: 
1.6       rillig   3358: 11.6. work*
1.1       dsieger  3359: 
                   3360: When you type make, the distribution files are unpacked into the directory
                   3361: denoted by WRKDIR. It can be removed by running make clean. Besides the
                   3362: sources, this directory is also used to keep various timestamp files. The
                   3363: directory gets removed completely on clean. The default is ${.CURDIR}/work or $
                   3364: {.CURDIR}/work.${MACHINE_ARCH} if OBJMACHINE is set.
                   3365: 
1.6       rillig   3366: 11.7. files/*
1.1       dsieger  3367: 
                   3368: If you have any files that you wish to be placed in the package prior to
                   3369: configuration or building, you could place these files here and use a ${CP}
                   3370: command in the "pre-configure" target to achieve this. Alternatively, you could
                   3371: simply diff the file against /dev/null and use the patch mechanism to manage
                   3372: the creation of this file.
                   3373: 
                   3374: If you want to share files in this way with other packages, set the FILESDIR
                   3375: variable to point to the other package's files directory, e.g.:
                   3376: 
                   3377: FILESDIR=${.CURDIR}/../xemacs/files
                   3378: 
1.6       rillig   3379: Chapter 12. Programming in Makefiles
1.1       dsieger  3380: 
                   3381: Table of Contents
                   3382: 
1.6       rillig   3383: 12.1. Caveats
                   3384: 12.2. Makefile variables
1.1       dsieger  3385: 
1.6       rillig   3386:     12.2.1. Naming conventions
1.1       dsieger  3387: 
1.6       rillig   3388: 12.3. Code snippets
1.1       dsieger  3389: 
1.6       rillig   3390:     12.3.1. Adding things to a list
1.117     sevan    3391:     12.3.2. Echoing a string exactly as-is
1.108     rillig   3392:     12.3.3. Passing CFLAGS to GNU configure scripts
                   3393:     12.3.4. Handling possibly empty variables
1.1       dsieger  3394: 
                   3395: Pkgsrc consists of many Makefile fragments, each of which forms a well-defined
                   3396: part of the pkgsrc system. Using the make(1) system as a programming language
                   3397: for a big system like pkgsrc requires some discipline to keep the code correct
                   3398: and understandable.
                   3399: 
                   3400: The basic ingredients for Makefile programming are variables (which are
                   3401: actually macros) and shell commands. Among these shell commands may even be
                   3402: more complex ones like awk(1) programs. To make sure that every shell command
                   3403: runs as intended it is necessary to quote all variables correctly when they are
                   3404: used.
                   3405: 
                   3406: This chapter describes some patterns, that appear quite often in Makefiles,
                   3407: including the pitfalls that come along with them.
                   3408: 
1.6       rillig   3409: 12.1. Caveats
1.1       dsieger  3410: 
                   3411:   * When you are creating a file as a target of a rule, always write the data
                   3412:     to a temporary file first and finally rename that file. Otherwise there
                   3413:     might occur an error in the middle of generating the file, and when the
                   3414:     user runs make(1) for the second time, the file exists and will not be
                   3415:     regenerated properly. Example:
                   3416: 
                   3417:     wrong:
                   3418:             @echo "line 1" > ${.TARGET}
                   3419:             @echo "line 2" >> ${.TARGET}
                   3420:             @false
                   3421: 
                   3422:     correct:
                   3423:             @echo "line 1" > ${.TARGET}.tmp
                   3424:             @echo "line 2" >> ${.TARGET}.tmp
                   3425:             @false
                   3426:             @mv ${.TARGET}.tmp ${.TARGET}
                   3427: 
                   3428:     When you run make wrong twice, the file wrong will exist, although there
                   3429:     was an error message in the first run. On the other hand, running make
                   3430:     correct gives an error message twice, as expected.
                   3431: 
                   3432:     You might remember that make(1) sometimes removes ${.TARGET} in case of
                   3433:     error, but this only happens when it is interrupted, for example by
                   3434:     pressing ^C. This does not happen when one of the commands fails (like
                   3435:     false(1) above).
                   3436: 
1.6       rillig   3437: 12.2. Makefile variables
1.1       dsieger  3438: 
                   3439: Makefile variables contain strings that can be processed using the five
                   3440: operators ``='', ``+='', ``?='', ``:='', and ``!='', which are described in the
                   3441: make(1) man page.
                   3442: 
                   3443: When a variable's value is parsed from a Makefile, the hash character ``#'' and
                   3444: the backslash character ``\'' are handled specially. If a backslash is followed
                   3445: by a newline, any whitespace immediately in front of the backslash, the
                   3446: backslash, the newline, and any whitespace immediately behind the newline are
                   3447: replaced with a single space. A backslash character and an immediately
                   3448: following hash character are replaced with a single hash character. Otherwise,
                   3449: the backslash is passed as is. In a variable assignment, any hash character
                   3450: that is not preceded by a backslash starts a comment that continues upto the
                   3451: end of the logical line.
                   3452: 
1.108     rillig   3453: The evaluation of variables either happens immediately or lazy. It happens
                   3454: immediately when the variable occurs on the right-hand side of the ``:='' or
                   3455: the ``!='' operator, in a .if condition or a .for loop. In the other cases, it
                   3456: is evaluated lazily.
1.1       dsieger  3457: 
                   3458: Some of the modifiers split the string into words and then operate on the
                   3459: words, others operate on the string as a whole. When a string is split into
1.108     rillig   3460: words, it is split like in sh(1).
1.1       dsieger  3461: 
                   3462: There are several types of variables that should be handled differently.
                   3463: Strings and two types of lists.
                   3464: 
                   3465:   * Strings can contain arbitrary characters. Nevertheless, you should restrict
                   3466:     yourself to only using printable characters. Examples are PREFIX and
                   3467:     COMMENT.
                   3468: 
                   3469:   * Internal lists are lists that are never exported to any shell command.
                   3470:     Their elements are separated by whitespace. Therefore, the elements
                   3471:     themselves cannot have embedded whitespace. Any other characters are
                   3472:     allowed. Internal lists can be used in .for loops. Examples are DEPENDS and
                   3473:     BUILD_DEPENDS.
                   3474: 
                   3475:   * External lists are lists that may be exported to a shell command. Their
                   3476:     elements can contain any characters, including whitespace. That's why they
                   3477:     cannot be used in .for loops. Examples are DISTFILES and MASTER_SITES.
                   3478: 
1.6       rillig   3479: 12.2.1. Naming conventions
1.1       dsieger  3480: 
                   3481:   * All variable names starting with an underscore are reserved for use by the
                   3482:     pkgsrc infrastructure. They shall not be used by package Makefiles.
                   3483: 
                   3484:   * In .for loops you should use lowercase variable names for the iteration
                   3485:     variables.
                   3486: 
                   3487:   * All list variables should have a ``plural'' name, e.g. PKG_OPTIONS or
                   3488:     DISTFILES.
                   3489: 
1.6       rillig   3490: 12.3. Code snippets
1.1       dsieger  3491: 
1.108     rillig   3492: 12.3.1. Adding things to a list
                   3493: 
                   3494: When adding a string that possibly contains whitespace or quotes to a list
                   3495: (example 1), it must be quoted using the :Q modifier.
1.1       dsieger  3496: 
1.108     rillig   3497: When adding another list to a list (example 2), it must not be quoted, since
                   3498: its elements are already quoted.
1.1       dsieger  3499: 
1.108     rillig   3500: STRING=         foo * bar `date`
                   3501: LIST=           # empty
                   3502: ANOTHER_LIST=   a=b c=d
1.1       dsieger  3503: 
1.108     rillig   3504: LIST+=          ${STRING:Q}       # 1
                   3505: LIST+=          ${ANOTHER_LIST}   # 2
1.1       dsieger  3506: 
1.117     sevan    3507: 12.3.2. Echoing a string exactly as-is
1.1       dsieger  3508: 
1.108     rillig   3509: Echoing a string containing special characters needs special work.
1.1       dsieger  3510: 
                   3511: STRING=         foo bar <    > * `date` $$HOME ' "
1.108     rillig   3512: EXAMPLE_ENV=    string=${STRING:Q} x=multiple\ quoted\ words
1.1       dsieger  3513: 
                   3514: all:
                   3515:         echo ${STRING}                  # 1
1.108     rillig   3516:         echo ${STRING:Q}                # 2
                   3517:         printf '%s\n' ${STRING:Q}''     # 3
                   3518:         env ${EXAMPLE_ENV} sh -c 'echo "$$string"; echo "$$x"'   # 4
1.1       dsieger  3519: 
                   3520: Example 1 leads to a syntax error in the shell, as the characters are just
                   3521: copied.
                   3522: 
1.108     rillig   3523: Example 2 quotes the string so that the shell interprets it correctly. But the
                   3524: echo command may additionally interpret strings with a leading dash or those
                   3525: containing backslashes.
                   3526: 
                   3527: Example 3 can handle arbitrary strings, since printf(1) only interprets the
                   3528: format string, but not the next argument.
                   3529: 
                   3530: In example 4, the EXAMPLE_ENV does not need to be quoted because the quoting
                   3531: has already been done when adding elements to the list.
                   3532: 
                   3533: 12.3.3. Passing CFLAGS to GNU configure scripts
                   3534: 
                   3535: When passing CFLAGS or similar variables to a GNU-style configure script
                   3536: (especially those that call other configure scripts), it must not have leading
                   3537: or trailing whitespace, since otherwise the configure script gets confused. To
                   3538: trim leading and trailing whitespace, use the :M modifier, as in the following
                   3539: example:
                   3540: 
                   3541: CPPFLAGS=               # empty
                   3542: CPPFLAGS+=              -Wundef -DPREFIX=\"${PREFIX}\"
                   3543: CPPFLAGS+=              ${MY_CPPFLAGS}
                   3544: 
                   3545: CONFIGURE_ARGS+=        CPPFLAGS=${CPPFLAGS:M*:Q}
                   3546: 
                   3547: all:
                   3548:         echo x${CPPFLAGS:Q}x            # leading and trailing whitespace
                   3549:         echo x${CONFIGURE_ARGS:Q}x      # properly trimmed
                   3550: 
                   3551: In this example, CPPFLAGS has both leading and trailing whitespace because the
                   3552: += operator always adds a space.
                   3553: 
                   3554: 12.3.4. Handling possibly empty variables
                   3555: 
                   3556: When a possibly empty variable is used in a shell program, it may lead to a
                   3557: syntax error.
                   3558: 
                   3559: EGFILES=        # empty
                   3560: 
                   3561: install-examples:   # produces a syntax error in the shell
                   3562:         for egfile in ${EGFILES}; do            \
                   3563:                 echo "Installing $$egfile";     \
                   3564:         done
                   3565: 
                   3566: The shell only sees the text for egfile in ; do, since ${EGFILES} is replaced
                   3567: with an empty string by make(1). To fix this syntax error, use one of the
                   3568: snippets below.
                   3569: 
                   3570: EMPTY=          # empty
                   3571: 
                   3572: install-examples:
                   3573:         for egfile in ${EGFILES} ""; do         \
                   3574:                 [ -n "$$egfile" ] || continue;  \
                   3575:                 echo "Installing $$egfile";     \
                   3576:         done
                   3577: 
                   3578: In this case, an empty string is appended to the iteration list (to prevent the
                   3579: syntax error) and filtered out later.
1.1       dsieger  3580: 
1.108     rillig   3581: EGFILES=        # empty
1.1       dsieger  3582: 
1.108     rillig   3583: install-examples:
                   3584: .for egfile in ${EGFILES}
                   3585:         echo "Installing ${egfile}"
                   3586: .endfor
                   3587: 
                   3588: This variant only works when EGFILES does not contain filenames with spaces,
                   3589: since the .for loop splits on simple whitespace.
                   3590: 
                   3591: To have a shell command test whether a make variable is empty, use the
                   3592: following code: ${TEST} -z ${POSSIBLY_EMPTY:Q}"".
1.1       dsieger  3593: 
1.6       rillig   3594: Chapter 13. PLIST issues
1.1       dsieger  3595: 
                   3596: Table of Contents
                   3597: 
1.6       rillig   3598: 13.1. RCS ID
                   3599: 13.2. Semi-automatic PLIST generation
                   3600: 13.3. Tweaking output of make print-PLIST
                   3601: 13.4. Variable substitution in PLIST
                   3602: 13.5. Man page compression
                   3603: 13.6. Changing PLIST source with PLIST_SRC
                   3604: 13.7. Platform-specific and differing PLISTs
1.86      wiz      3605: 13.8. Build-specific PLISTs
                   3606: 13.9. Sharing directories between packages
1.1       dsieger  3607: 
                   3608: The PLIST file contains a package's "packing list", i.e. a list of files that
                   3609: belong to the package (relative to the ${PREFIX} directory it's been installed
                   3610: in) plus some additional statements - see the pkg_create(1) man page for a full
                   3611: list. This chapter addresses some issues that need attention when dealing with
                   3612: the PLIST file (or files, see below!).
                   3613: 
1.6       rillig   3614: 13.1. RCS ID
1.1       dsieger  3615: 
                   3616: Be sure to add a RCS ID line as the first thing in any PLIST file you write:
                   3617: 
1.121     sevan    3618: @comment $NetBSD $
                   3619: 
1.123     wiz      3620: An artificial space has been added between NetBSD and $, this is a workaround
1.121     sevan    3621: here to prevent CVS expanding to the filename of the guide. When adding the RCS
1.125     leot     3622: ID the space should be omitted.
1.1       dsieger  3623: 
1.6       rillig   3624: 13.2. Semi-automatic PLIST generation
1.1       dsieger  3625: 
                   3626: You can use the make print-PLIST command to output a PLIST that matches any new
1.6       rillig   3627: files since the package was extracted. See Section 17.17, "Other helpful
1.1       dsieger  3628: targets" for more information on this target.
                   3629: 
1.6       rillig   3630: 13.3. Tweaking output of make print-PLIST
1.1       dsieger  3631: 
                   3632: The PRINT_PLIST_AWK variable takes a set of AWK patterns and actions that are
                   3633: used to filter the output of print-PLIST. You can append any chunk of AWK
                   3634: scripting you like to it, but be careful with quoting.
                   3635: 
                   3636: For example, to get all files inside the libdata/foo directory removed from the
                   3637: resulting PLIST:
                   3638: 
                   3639: PRINT_PLIST_AWK+=       /^libdata\/foo/ { next; }
                   3640: 
1.6       rillig   3641: 13.4. Variable substitution in PLIST
1.1       dsieger  3642: 
                   3643: A number of variables are substituted automatically in PLISTs when a package is
                   3644: installed on a system. This includes the following variables:
                   3645: 
                   3646: ${MACHINE_ARCH}, ${MACHINE_GNU_ARCH}
                   3647: 
                   3648:     Some packages like emacs and perl embed information about which
                   3649:     architecture they were built on into the pathnames where they install their
                   3650:     files. To handle this case, PLIST will be preprocessed before actually
                   3651:     used, and the symbol "${MACHINE_ARCH}" will be replaced by what uname -p
                   3652:     gives. The same is done if the string ${MACHINE_GNU_ARCH} is embedded in
                   3653:     PLIST somewhere - use this on packages that have GNU autoconf-created
                   3654:     configure scripts.
                   3655: 
                   3656:     Legacy note
                   3657: 
                   3658:     There used to be a symbol "$ARCH" that was replaced by the output of uname
                   3659:     -m, but that's no longer supported and has been removed.
                   3660: 
                   3661: ${OPSYS}, ${LOWER_OPSYS}, ${OS_VERSION}
                   3662: 
                   3663:     Some packages want to embed the OS name and version into some paths. To do
                   3664:     this, use these variables in the PLIST:
                   3665: 
1.42      asau     3666:       + ${OPSYS} - output of "uname -s"
1.1       dsieger  3667: 
1.42      asau     3668:       + ${LOWER_OPSYS} - lowercase common name (eg. "solaris")
1.1       dsieger  3669: 
1.42      asau     3670:       + ${OS_VERSION} - "uname -r"
1.1       dsieger  3671: 
1.88      tnn      3672: For a list of values which are replaced by default, the output of make help
                   3673: topic=PLIST_SUBST as well as searching the pkgsrc/mk directory with grep for
                   3674: PLIST_SUBST should help.
1.1       dsieger  3675: 
                   3676: If you want to change other variables not listed above, you can add variables
                   3677: and their expansions to this variable in the following way, similar to
1.6       rillig   3678: MESSAGE_SUBST (see Section 11.5, "Optional files"):
1.1       dsieger  3679: 
                   3680: PLIST_SUBST+=   SOMEVAR="somevalue"
                   3681: 
                   3682: This replaces all occurrences of "${SOMEVAR}" in the PLIST with "somevalue".
                   3683: 
1.19      snj      3684: The PLIST_VARS variable can be used to simplify the common case of
                   3685: conditionally including some PLIST entries. It can be done by adding
                   3686: PLIST_VARS+=foo and setting the corresponding PLIST.foo variable to yes if the
                   3687: entry should be included. This will substitute "${PLIST.foo}" in the PLIST with
                   3688: either """" or ""@comment "". For example, in Makefile:
1.18      mishka   3689: 
                   3690: PLIST_VARS+=    foo
                   3691: .if condition
                   3692: PLIST.foo=      yes
                   3693: .else
                   3694: 
                   3695: And then in PLIST:
                   3696: 
1.121     sevan    3697: @comment $NetBSD $
1.18      mishka   3698: bin/bar
                   3699: man/man1/bar.1
                   3700: ${PLIST.foo}bin/foo
                   3701: ${PLIST.foo}man/man1/foo.1
                   3702: ${PLIST.foo}share/bar/foo.data
                   3703: 
1.123     wiz      3704: An artificial space has been added between NetBSD and $, this is a workaround
1.121     sevan    3705: here to prevent CVS expanding to the filename of the guide. When adding the RCS
                   3706: ID the space should be ommited.
                   3707: 
1.6       rillig   3708: 13.5. Man page compression
1.1       dsieger  3709: 
                   3710: Man pages should be installed in compressed form if MANZ is set (in
                   3711: bsd.own.mk), and uncompressed otherwise. To handle this in the PLIST file, the
                   3712: suffix ".gz" is appended/removed automatically for man pages according to MANZ
                   3713: and MANCOMPRESSED being set or not, see above for details. This modification of
                   3714: the PLIST file is done on a copy of it, not PLIST itself.
                   3715: 
1.6       rillig   3716: 13.6. Changing PLIST source with PLIST_SRC
1.1       dsieger  3717: 
                   3718: To use one or more files as source for the PLIST used in generating the binary
                   3719: package, set the variable PLIST_SRC to the names of that file(s). The files are
                   3720: later concatenated using cat(1), and the order of things is important. The
                   3721: default for PLIST_SRC is ${PKGDIR}/PLIST.
                   3722: 
1.6       rillig   3723: 13.7. Platform-specific and differing PLISTs
1.1       dsieger  3724: 
                   3725: Some packages decide to install a different set of files based on the operating
                   3726: system being used. These differences can be automatically handled by using the
                   3727: following files:
                   3728: 
                   3729:   * PLIST.common
                   3730: 
                   3731:   * PLIST.${OPSYS}
                   3732: 
                   3733:   * PLIST.${MACHINE_ARCH}
                   3734: 
                   3735:   * PLIST.${OPSYS}-${MACHINE_ARCH}
                   3736: 
                   3737:   * PLIST.common_end
                   3738: 
1.86      wiz      3739: 13.8. Build-specific PLISTs
                   3740: 
                   3741: Some packages decide to generate hard-to-guess file names during installation
                   3742: that are hard to wire down.
                   3743: 
                   3744: In such cases, you can set the GENERATE_PLIST variable to shell code terminated
                   3745: (with a semicolon) that will output PLIST entries which will be appended to the
                   3746: PLIST
                   3747: 
                   3748: You can find one example in editors/xemacs:
                   3749: 
1.111     sevan    3750: GENERATE_PLIST+=        ${ECHO} bin/${DISTNAME}-`${WRKSRC}/src/xemacs -sd`.dmp ;
1.86      wiz      3751: 
                   3752: which will append something like bin/xemacs-21.4.23-54e8ea71.dmp to the PLIST.
                   3753: 
                   3754: 13.9. Sharing directories between packages
1.1       dsieger  3755: 
                   3756: A "shared directory" is a directory where multiple (and unrelated) packages
1.23      jakllsch 3757: install files. These directories were problematic because you had to add
1.1       dsieger  3758: special tricks in the PLIST to conditionally remove them, or have some
                   3759: centralized package handle them.
                   3760: 
1.23      jakllsch 3761: In pkgsrc, it is now easy: Each package should create directories and install
                   3762: files as needed; pkg_delete will remove any directories left empty after
                   3763: uninstalling a package.
1.1       dsieger  3764: 
1.23      jakllsch 3765: If a package needs an empty directory to work, create the directory during
                   3766: installation as usual, and also add an entry to the PLIST:
1.1       dsieger  3767: 
1.23      jakllsch 3768: @pkgdir path/to/empty/directory
1.1       dsieger  3769: 
1.86      wiz      3770: or take a look at MAKE_DIRS and OWN_DIRS.
                   3771: 
1.6       rillig   3772: Chapter 14. Buildlink methodology
1.1       dsieger  3773: 
                   3774: Table of Contents
                   3775: 
1.6       rillig   3776: 14.1. Converting packages to use buildlink3
                   3777: 14.2. Writing buildlink3.mk files
1.1       dsieger  3778: 
1.6       rillig   3779:     14.2.1. Anatomy of a buildlink3.mk file
1.27      wiz      3780:     14.2.2. Updating BUILDLINK_API_DEPENDS.pkg and BUILDLINK_ABI_DEPENDS.pkg in
                   3781:         buildlink3.mk files
1.1       dsieger  3782: 
1.6       rillig   3783: 14.3. Writing builtin.mk files
1.1       dsieger  3784: 
1.6       rillig   3785:     14.3.1. Anatomy of a builtin.mk file
                   3786:     14.3.2. Global preferences for native or pkgsrc software
1.1       dsieger  3787: 
                   3788: Buildlink is a framework in pkgsrc that controls what headers and libraries are
                   3789: seen by a package's configure and build processes. This is implemented in a two
                   3790: step process:
                   3791: 
                   3792:  1. Symlink headers and libraries for dependencies into BUILDLINK_DIR, which by
                   3793:     default is a subdirectory of WRKDIR.
                   3794: 
                   3795:  2. Create wrapper scripts that are used in place of the normal compiler tools
                   3796:     that translate -I${LOCALBASE}/include and -L${LOCALBASE}/lib into
                   3797:     references to BUILDLINK_DIR. The wrapper scripts also make native compiler
                   3798:     on some operating systems look like GCC, so that packages that expect GCC
                   3799:     won't require modifications to build with those native compilers.
                   3800: 
                   3801: This normalizes the environment in which a package is built so that the package
                   3802: may be built consistently despite what other software may be installed. Please
                   3803: note that the normal system header and library paths, e.g. /usr/include, /usr/
                   3804: lib, etc., are always searched -- buildlink3 is designed to insulate the
                   3805: package build from non-system-supplied software.
                   3806: 
1.6       rillig   3807: 14.1. Converting packages to use buildlink3
1.1       dsieger  3808: 
1.25      wiz      3809: The process of converting packages to use the buildlink3 framework ("bl3ifying"
                   3810: ) is fairly straightforward. The things to keep in mind are:
1.1       dsieger  3811: 
                   3812:  1. Ensure that the build always calls the wrapper scripts instead of the
                   3813:     actual toolchain. Some packages are tricky, and the only way to know for
                   3814:     sure is the check ${WRKDIR}/.work.log to see if the wrappers are being
                   3815:     invoked.
                   3816: 
                   3817:  2. Don't override PREFIX from within the package Makefile, e.g. Java VMs,
                   3818:     standalone shells, etc., because the code to symlink files into $
                   3819:     {BUILDLINK_DIR} looks for files relative to "pkg_info -qp pkgname".
                   3820: 
                   3821:  3. Remember that only the buildlink3.mk files that you list in a package's
                   3822:     Makefile are added as dependencies for that package.
                   3823: 
                   3824: If a dependency on a particular package is required for its libraries and
                   3825: headers, then we replace:
                   3826: 
                   3827: DEPENDS+=       foo>=1.1.0:../../category/foo
                   3828: 
                   3829: with
                   3830: 
                   3831: .include "../../category/foo/buildlink3.mk"
                   3832: 
                   3833: The buildlink3.mk files usually define the required dependencies. If you need a
                   3834: newer version of the dependency when using buildlink3.mk files, then you can
                   3835: define it in your Makefile; for example:
                   3836: 
                   3837: BUILDLINK_API_DEPENDS.foo+=   foo>=1.1.0
                   3838: .include "../../category/foo/buildlink3.mk"
                   3839: 
                   3840: There are several buildlink3.mk files in pkgsrc/mk that handle special package
                   3841: issues:
                   3842: 
                   3843:   * bdb.buildlink3.mk chooses either the native or a pkgsrc Berkeley DB
                   3844:     implementation based on the values of BDB_ACCEPTED and BDB_DEFAULT.
                   3845: 
                   3846:   * curses.buildlink3.mk: If the system comes with neither Curses nor NCurses,
                   3847:     this will take care to install the devel/ncurses package.
                   3848: 
                   3849:   * krb5.buildlink3.mk uses the value of KRB5_ACCEPTED to choose between adding
                   3850:     a dependency on Heimdal or MIT-krb5 for packages that require a Kerberos 5
                   3851:     implementation.
                   3852: 
                   3853:   * motif.buildlink3.mk checks for a system-provided Motif installation or adds
1.126     leot     3854:     a dependency on x11/lesstif or x11/motif. The user can set MOTIF_TYPE to "
                   3855:     dt", "lesstif" or "motif" to choose which Motif version will be used.
1.1       dsieger  3856: 
1.57      wiz      3857:   * readline.buildlink3.mk checks for a system-provided GNU readline or
                   3858:     editline (libedit) installation, or adds a dependency on devel/readline,
                   3859:     devel/editline. The user can set READLINE_DEFAULT to choose readline
1.56      ryoon    3860:     implementation. If your package really needs GNU readline library, its
                   3861:     Makefile should include devel/readline/buildlink3.mk instead of
                   3862:     readline.buildlink3.mk.
                   3863: 
1.1       dsieger  3864:   * oss.buildlink3.mk defines several variables that may be used by packages
                   3865:     that use the Open Sound System (OSS) API.
                   3866: 
1.36      wiz      3867:   * pgsql.buildlink3.mk will accept any of the Postgres versions in the
                   3868:     variable PGSQL_VERSIONS_ACCEPTED and default to the version
                   3869:     PGSQL_VERSION_DEFAULT. See the file for more information.
1.1       dsieger  3870: 
                   3871:   * pthread.buildlink3.mk uses the value of PTHREAD_OPTS and checks for native
                   3872:     pthreads or adds a dependency on devel/pth as needed.
                   3873: 
                   3874:   * xaw.buildlink3.mk uses the value of XAW_TYPE to choose a particular Athena
                   3875:     widgets library.
                   3876: 
                   3877: The comments in those buildlink3.mk files provide a more complete description
                   3878: of how to use them properly.
                   3879: 
1.6       rillig   3880: 14.2. Writing buildlink3.mk files
1.1       dsieger  3881: 
                   3882: A package's buildlink3.mk file is included by Makefiles to indicate the need to
                   3883: compile and link against header files and libraries provided by the package. A
                   3884: buildlink3.mk file should always provide enough information to add the correct
                   3885: type of dependency relationship and include any other buildlink3.mk files that
                   3886: it needs to find headers and libraries that it needs in turn.
                   3887: 
                   3888: To generate an initial buildlink3.mk file for further editing, Rene Hexel's
                   3889: pkgtools/createbuildlink package is highly recommended. For most packages, the
                   3890: following command will generate a good starting point for buildlink3.mk files:
                   3891: 
                   3892: % cd pkgsrc/category/pkgdir
                   3893: % createbuildlink >buildlink3.mk
                   3894: 
                   3895: 
1.6       rillig   3896: 14.2.1. Anatomy of a buildlink3.mk file
1.1       dsieger  3897: 
                   3898: The following real-life example buildlink3.mk is taken from pkgsrc/graphics/
                   3899: tiff:
                   3900: 
1.19      snj      3901: # $NetBSD: buildlink3.mk,v 1.16 2009/03/20 19:24:45 joerg Exp $
1.1       dsieger  3902: 
1.19      snj      3903: BUILDLINK_TREE+=        tiff
1.1       dsieger  3904: 
1.19      snj      3905: .if !defined(TIFF_BUILDLINK3_MK)
                   3906: TIFF_BUILDLINK3_MK:=
1.1       dsieger  3907: 
1.19      snj      3908: BUILDLINK_API_DEPENDS.tiff+=    tiff>=3.6.1
                   3909: BUILDLINK_ABI_DEPENDS.tiff+=    tiff>=3.7.2nb1
1.1       dsieger  3910: BUILDLINK_PKGSRCDIR.tiff?=      ../../graphics/tiff
                   3911: 
                   3912: .include "../../devel/zlib/buildlink3.mk"
                   3913: .include "../../graphics/jpeg/buildlink3.mk"
1.19      snj      3914: .endif # TIFF_BUILDLINK3_MK
1.1       dsieger  3915: 
1.19      snj      3916: BUILDLINK_TREE+=        -tiff
1.1       dsieger  3917: 
1.19      snj      3918: The header and footer manipulate BUILDLINK_TREE, which is common across all
                   3919: buildlink3.mk files and is used to track the dependency tree.
1.1       dsieger  3920: 
1.19      snj      3921: The main section is protected from multiple inclusion and controls how the
1.1       dsieger  3922: dependency on pkg is added. Several important variables are set in the section:
                   3923: 
                   3924:   * BUILDLINK_API_DEPENDS.pkg is the actual dependency recorded in the
                   3925:     installed package; this should always be set using += to ensure that we're
                   3926:     appending to any pre-existing list of values. This variable should be set
1.27      wiz      3927:     to the first version of the package that had an backwards-incompatible API
                   3928:     change.
1.1       dsieger  3929: 
                   3930:   * BUILDLINK_PKGSRCDIR.pkg is the location of the pkg pkgsrc directory.
                   3931: 
                   3932:   * BUILDLINK_DEPMETHOD.pkg (not shown above) controls whether we use
                   3933:     BUILD_DEPENDS or DEPENDS to add the dependency on pkg. The build dependency
                   3934:     is selected by setting BUILDLINK_DEPMETHOD.pkg to "build". By default, the
                   3935:     full dependency is used.
                   3936: 
                   3937:   * BUILDLINK_INCDIRS.pkg and BUILDLINK_LIBDIRS.pkg (not shown above) are lists
                   3938:     of subdirectories of ${BUILDLINK_PREFIX.pkg} to add to the header and
                   3939:     library search paths. These default to "include" and "lib" respectively.
                   3940: 
                   3941:   * BUILDLINK_CPPFLAGS.pkg (not shown above) is the list of preprocessor flags
                   3942:     to add to CPPFLAGS, which are passed on to the configure and build phases.
                   3943:     The "-I" option should be avoided and instead be handled using
                   3944:     BUILDLINK_INCDIRS.pkg as above.
                   3945: 
                   3946: The following variables are all optionally defined within this second section
                   3947: (protected against multiple inclusion) and control which package files are
                   3948: symlinked into ${BUILDLINK_DIR} and how their names are transformed during the
                   3949: symlinking:
                   3950: 
                   3951:   * BUILDLINK_FILES.pkg (not shown above) is a shell glob pattern relative to $
                   3952:     {BUILDLINK_PREFIX.pkg} to be symlinked into ${BUILDLINK_DIR}, e.g. include/
                   3953:     *.h.
                   3954: 
                   3955:   * BUILDLINK_FILES_CMD.pkg (not shown above) is a shell pipeline that outputs
                   3956:     to stdout a list of files relative to ${BUILDLINK_PREFIX.pkg}. The
                   3957:     resulting files are to be symlinked into ${BUILDLINK_DIR}. By default, this
                   3958:     takes the +CONTENTS of a pkg and filters it through $
                   3959:     {BUILDLINK_CONTENTS_FILTER.pkg}.
                   3960: 
                   3961:   * BUILDLINK_CONTENTS_FILTER.pkg (not shown above) is a filter command that
                   3962:     filters +CONTENTS input into a list of files relative to $
1.84      wiz      3963:     {BUILDLINK_PREFIX.pkg} on stdout. By default, BUILDLINK_CONTENTS_FILTER.pkg
                   3964:     outputs the contents of the include and lib directories in the package
                   3965:     +CONTENTS.
1.1       dsieger  3966: 
                   3967:   * BUILDLINK_FNAME_TRANSFORM.pkg (not shown above) is a list of sed arguments
                   3968:     used to transform the name of the source filename into a destination
                   3969:     filename, e.g. -e "s|/curses.h|/ncurses.h|g".
                   3970: 
1.19      snj      3971: This section can additionally include any buildlink3.mk needed for pkg's
                   3972: library dependencies. Including these buildlink3.mk files means that the
                   3973: headers and libraries for these dependencies are also symlinked into $
                   3974: {BUILDLINK_DIR} whenever the pkg buildlink3.mk file is included. Dependencies
                   3975: are only added for directly include buildlink3.mk files.
1.1       dsieger  3976: 
1.48      wiz      3977: When providing a buildlink3.mk and including other buildlink3.mk files in it,
1.51      wiz      3978: please only add necessary ones, i.e., those whose libraries or header files are
1.48      wiz      3979: automatically exposed when the package is use.
                   3980: 
                   3981: In particular, if only an executable (bin/foo) is linked against a library,
                   3982: that library does not need to be propagated in the buildlink3.mk file.
                   3983: 
                   3984: The following steps should help you decide if a buildlink3.mk file needs to be
                   3985: included:
                   3986: 
                   3987:   * Look at the installed header files: What headers do they include? The
                   3988:     packages providing these files must be buildlinked.
                   3989: 
1.50      wiz      3990:   * Run ldd on all installed libraries and look against what other libraries
                   3991:     they link. Some of the packages providing these probably need to be
                   3992:     buildlinked; however, it's not automatic, since e.g. GTK on some systems
                   3993:     pulls in the X libraries, so they will show up in the ldd output, while on
1.51      wiz      3994:     others (like OS X) it won't. ldd output can thus only be used as a hint.
1.50      wiz      3995: 
1.27      wiz      3996: 14.2.2. Updating BUILDLINK_API_DEPENDS.pkg and BUILDLINK_ABI_DEPENDS.pkg in
                   3997: buildlink3.mk files
1.1       dsieger  3998: 
1.27      wiz      3999: These two variables differ in that one describes source compatibility (API) and
                   4000: the other binary compatibility (ABI). The difference is that a change in the
                   4001: API breaks compilation of programs while changes in the ABI stop compiled
                   4002: programs from running.
                   4003: 
1.28      wiz      4004: Changes to the BUILDLINK_API_DEPENDS.pkg variable in a buildlink3.mk file
                   4005: happen very rarely. One possible reason is that all packages depending on this
                   4006: already need a newer version. In case it is bumped see the description below.
1.27      wiz      4007: 
                   4008: The most common example of an ABI change is that the major version of a shared
                   4009: library is increased. In this case, BUILDLINK_ABI_DEPENDS.pkg should be
                   4010: adjusted to require at least the new package version. Then the packages that
                   4011: depend on this package need their PKGREVISIONs increased and, if they have
                   4012: buildlink3.mk files, their BUILDLINK_ABI_DEPENDS.pkg adjusted, too. This is
                   4013: needed so pkgsrc will require the correct package dependency and not settle for
                   4014: an older one when building the source.
1.1       dsieger  4015: 
1.108     rillig   4016: See Section 19.1.5, "Handling dependencies" for more information about
1.1       dsieger  4017: dependencies on other packages, including the BUILDLINK_ABI_DEPENDS and
                   4018: ABI_DEPENDS definitions.
                   4019: 
                   4020: Please take careful consideration before adjusting BUILDLINK_API_DEPENDS.pkg or
                   4021: BUILDLINK_ABI_DEPENDS.pkg as we don't want to cause unneeded package deletions
                   4022: and rebuilds. In many cases, new versions of packages work just fine with older
                   4023: dependencies.
                   4024: 
                   4025: Also it is not needed to set BUILDLINK_ABI_DEPENDS.pkg when it is identical to
                   4026: BUILDLINK_API_DEPENDS.pkg.
                   4027: 
1.6       rillig   4028: 14.3. Writing builtin.mk files
1.1       dsieger  4029: 
                   4030: Some packages in pkgsrc install headers and libraries that coincide with
                   4031: headers and libraries present in the base system. Aside from a buildlink3.mk
                   4032: file, these packages should also include a builtin.mk file that includes the
                   4033: necessary checks to decide whether using the built-in software or the pkgsrc
                   4034: software is appropriate.
                   4035: 
                   4036: The only requirements of a builtin.mk file for pkg are:
                   4037: 
                   4038:  1. It should set USE_BUILTIN.pkg to either "yes" or "no" after it is included.
                   4039: 
                   4040:  2. It should not override any USE_BUILTIN.pkg which is already set before the
                   4041:     builtin.mk file is included.
                   4042: 
                   4043:  3. It should be written to allow multiple inclusion. This is very important
                   4044:     and takes careful attention to Makefile coding.
                   4045: 
1.6       rillig   4046: 14.3.1. Anatomy of a builtin.mk file
1.1       dsieger  4047: 
                   4048: The following is the recommended template for builtin.mk files:
                   4049: 
                   4050: .if !defined(IS_BUILTIN.foo)
                   4051: #
                   4052: # IS_BUILTIN.foo is set to "yes" or "no" depending on whether "foo"
                   4053: # genuinely exists in the system or not.
                   4054: #
                   4055: IS_BUILTIN.foo?=        no
                   4056: 
                   4057: # BUILTIN_PKG.foo should be set here if "foo" is built-in and its package
                   4058: # version can be determined.
                   4059: #
                   4060: .  if !empty(IS_BUILTIN.foo:M[yY][eE][sS])
                   4061: BUILTIN_PKG.foo?=       foo-1.0
                   4062: .  endif
                   4063: .endif  # IS_BUILTIN.foo
                   4064: 
                   4065: .if !defined(USE_BUILTIN.foo)
                   4066: USE_BUILTIN.foo?=       ${IS_BUILTIN.foo}
                   4067: .  if defined(BUILTIN_PKG.foo)
                   4068: .    for _depend_ in ${BUILDLINK_API_DEPENDS.foo}
                   4069: .      if !empty(USE_BUILTIN.foo:M[yY][eE][sS])
                   4070: USE_BUILTIN.foo!=                                                       \
                   4071:         ${PKG_ADMIN} pmatch '${_depend_}' ${BUILTIN_PKG.foo}            \
                   4072:         && ${ECHO} "yes" || ${ECHO} "no"
                   4073: .      endif
                   4074: .    endfor
                   4075: .  endif
                   4076: .endif  # USE_BUILTIN.foo
                   4077: 
                   4078: CHECK_BUILTIN.foo?=     no
                   4079: .if !empty(CHECK_BUILTIN.foo:M[nN][oO])
                   4080: #
                   4081: # Here we place code that depends on whether USE_BUILTIN.foo is set to
                   4082: # "yes" or "no".
                   4083: #
                   4084: .endif  # CHECK_BUILTIN.foo
                   4085: 
                   4086: The first section sets IS_BUILTIN.pkg depending on if pkg really exists in the
                   4087: base system. This should not be a base system software with similar
                   4088: functionality to pkg; it should only be "yes" if the actual package is included
                   4089: as part of the base system. This variable is only used internally within the
                   4090: builtin.mk file.
                   4091: 
                   4092: The second section sets BUILTIN_PKG.pkg to the version of pkg in the base
                   4093: system if it exists (if IS_BUILTIN.pkg is "yes"). This variable is only used
                   4094: internally within the builtin.mk file.
                   4095: 
                   4096: The third section sets USE_BUILTIN.pkg and is required in all builtin.mk files.
                   4097: The code in this section must make the determination whether the built-in
                   4098: software is adequate to satisfy the dependencies listed in
                   4099: BUILDLINK_API_DEPENDS.pkg. This is typically done by comparing BUILTIN_PKG.pkg
1.25      wiz      4100: against each of the dependencies in BUILDLINK_API_DEPENDS.pkg. USE_BUILTIN.pkg 
1.1       dsieger  4101: must be set to the correct value by the end of the builtin.mk file. Note that
                   4102: USE_BUILTIN.pkg may be "yes" even if IS_BUILTIN.pkg is "no" because we may make
                   4103: the determination that the built-in version of the software is similar enough
                   4104: to be used as a replacement.
                   4105: 
                   4106: The last section is guarded by CHECK_BUILTIN.pkg, and includes code that uses
                   4107: the value of USE_BUILTIN.pkg set in the previous section. This typically
                   4108: includes, e.g., adding additional dependency restrictions and listing
                   4109: additional files to symlink into ${BUILDLINK_DIR} (via BUILDLINK_FILES.pkg).
                   4110: 
1.6       rillig   4111: 14.3.2. Global preferences for native or pkgsrc software
1.1       dsieger  4112: 
                   4113: When building packages, it's possible to choose whether to set a global
                   4114: preference for using either the built-in (native) version or the pkgsrc version
                   4115: of software to satisfy a dependency. This is controlled by setting
1.25      wiz      4116: PREFER_PKGSRC and PREFER_NATIVE. These variables take values of either "yes", "
                   4117: no", or a list of packages. PREFER_PKGSRC tells pkgsrc to use the pkgsrc
1.1       dsieger  4118: versions of software, while PREFER_NATIVE tells pkgsrc to use the built-in
                   4119: versions. Preferences are determined by the most specific instance of the
                   4120: package in either PREFER_PKGSRC or PREFER_NATIVE. If a package is specified in
                   4121: neither or in both variables, then PREFER_PKGSRC has precedence over
                   4122: PREFER_NATIVE. For example, to require using pkgsrc versions of software for
                   4123: all but the most basic bits on a NetBSD system, you can set:
                   4124: 
                   4125: PREFER_PKGSRC=  yes
                   4126: PREFER_NATIVE=  getopt skey tcp_wrappers
                   4127: 
                   4128: A package must have a builtin.mk file to be listed in PREFER_NATIVE, otherwise
                   4129: it is simply ignored in that list.
                   4130: 
1.117     sevan    4131: Setting PREFER_NATIVE should be performed straight after bootstrap and
                   4132: PREFER_PKGSRC during bootstrap. Switching between settings globally at a later
                   4133: date can introduce complications with dependency resolution. This is caused by
                   4134: packages built with the opposite preference being installed alongside each
                   4135: other.
                   4136: 
                   4137: # ./bootstrap --prefer-pkgsrc yes
                   4138: 
1.6       rillig   4139: Chapter 15. The pkginstall framework
1.1       dsieger  4140: 
                   4141: Table of Contents
                   4142: 
1.6       rillig   4143: 15.1. Files and directories outside the installation prefix
1.1       dsieger  4144: 
1.6       rillig   4145:     15.1.1. Directory manipulation
                   4146:     15.1.2. File manipulation
1.1       dsieger  4147: 
1.6       rillig   4148: 15.2. Configuration files
1.1       dsieger  4149: 
1.6       rillig   4150:     15.2.1. How PKG_SYSCONFDIR is set
                   4151:     15.2.2. Telling the software where configuration files are
                   4152:     15.2.3. Patching installations
                   4153:     15.2.4. Disabling handling of configuration files
1.1       dsieger  4154: 
1.6       rillig   4155: 15.3. System startup scripts
1.1       dsieger  4156: 
1.6       rillig   4157:     15.3.1. Disabling handling of system startup scripts
1.1       dsieger  4158: 
1.6       rillig   4159: 15.4. System users and groups
                   4160: 15.5. System shells
1.1       dsieger  4161: 
1.6       rillig   4162:     15.5.1. Disabling shell registration
1.1       dsieger  4163: 
1.6       rillig   4164: 15.6. Fonts
1.1       dsieger  4165: 
1.6       rillig   4166:     15.6.1. Disabling automatic update of the fonts databases
1.1       dsieger  4167: 
                   4168: This chapter describes the framework known as pkginstall, whose key features
                   4169: are:
                   4170: 
                   4171:   * Generic installation and manipulation of directories and files outside the
                   4172:     pkgsrc-handled tree, LOCALBASE.
                   4173: 
                   4174:   * Automatic handling of configuration files during installation, provided
                   4175:     that packages are correctly designed.
                   4176: 
                   4177:   * Generation and installation of system startup scripts.
                   4178: 
                   4179:   * Registration of system users and groups.
                   4180: 
                   4181:   * Registration of system shells.
                   4182: 
                   4183:   * Automatic updating of fonts databases.
                   4184: 
                   4185: The following sections inspect each of the above points in detail.
                   4186: 
                   4187: You may be thinking that many of the things described here could be easily done
                   4188: with simple code in the package's post-installation target (post-install). This
                   4189: is incorrect, as the code in them is only executed when building from source.
                   4190: Machines using binary packages could not benefit from it at all (as the code
                   4191: itself could be unavailable). Therefore, the only way to achieve any of the
                   4192: items described above is by means of the installation scripts, which are
                   4193: automatically generated by pkginstall.
                   4194: 
1.6       rillig   4195: 15.1. Files and directories outside the installation prefix
1.1       dsieger  4196: 
                   4197: As you already know, the PLIST file holds a list of files and directories that
                   4198: belong to a package. The names used in it are relative to the installation
                   4199: prefix (${PREFIX}), which means that it cannot register files outside this
                   4200: directory (absolute path names are not allowed). Despite this restriction, some
                   4201: packages need to install files outside this location; e.g., under ${VARBASE} or
                   4202: ${PKG_SYSCONFDIR}. The only way to achieve this is to create such files during
                   4203: installation time by using installation scripts.
                   4204: 
                   4205: The generic installation scripts are shell scripts that can contain arbitrary
                   4206: code. The list of scripts to execute is taken from the INSTALL_FILE variable,
                   4207: which defaults to INSTALL. A similar variable exists for package removal
                   4208: (DEINSTALL_FILE, whose default is DEINSTALL). These scripts can run arbitrary
                   4209: commands, so they have the potential to create and manage files anywhere in the
                   4210: file system.
                   4211: 
                   4212: Using these general installation files is not recommended, but may be needed in
                   4213: some special cases. One reason for avoiding them is that the user has to trust
                   4214: the packager that there is no unwanted or simply erroneous code included in the
                   4215: installation script. Also, previously there were many similar scripts for the
                   4216: same functionality, and fixing a common error involved finding and changing all
                   4217: of them.
                   4218: 
                   4219: The pkginstall framework offers another, standardized way. It provides generic
                   4220: scripts to abstract the manipulation of such files and directories based on
                   4221: variables set in the package's Makefile. The rest of this section describes
                   4222: these variables.
                   4223: 
1.6       rillig   4224: 15.1.1. Directory manipulation
1.1       dsieger  4225: 
                   4226: The following variables can be set to request the creation of directories
                   4227: anywhere in the file system:
                   4228: 
                   4229:   * MAKE_DIRS and OWN_DIRS contain a list of directories that should be created
                   4230:     and should attempt to be destroyed by the installation scripts. The
                   4231:     difference between the two is that the latter prompts the administrator to
                   4232:     remove any directories that may be left after deinstallation (because they
1.108     rillig   4233:     were not empty), while the former does not. Example:
                   4234: 
                   4235:     MAKE_DIRS+=             ${VARBASE}/foo/private
1.1       dsieger  4236: 
                   4237:   * MAKE_DIRS_PERMS and OWN_DIRS_PERMS contain a list of tuples describing
                   4238:     which directories should be created and should attempt to be destroyed by
                   4239:     the installation scripts. Each tuple holds the following values, separated
                   4240:     by spaces: the directory name, its owner, its group and its numerical mode.
                   4241:     For example:
                   4242: 
1.108     rillig   4243:     MAKE_DIRS_PERMS+=       ${VARBASE}/foo/private \
                   4244:                             ${REAL_ROOT_USER} ${REAL_ROOT_GROUP} 0700
1.1       dsieger  4245: 
                   4246:     The difference between the two is exactly the same as their non-PERMS
                   4247:     counterparts.
                   4248: 
1.6       rillig   4249: 15.1.2. File manipulation
1.1       dsieger  4250: 
                   4251: Creating non-empty files outside the installation prefix is tricky because the
                   4252: PLIST forces all files to be inside it. To overcome this problem, the only
                   4253: solution is to extract the file in the known place (i.e., inside the
                   4254: installation prefix) and copy it to the appropriate location during
                   4255: installation (done by the installation scripts generated by pkginstall). We
                   4256: will call the former the master file in the following paragraphs, which
                   4257: describe the variables that can be used to automatically and consistently
                   4258: handle files outside the installation prefix:
                   4259: 
1.31      wiz      4260:   * CONF_FILES and REQD_FILES are pairs of master and target files. During
1.1       dsieger  4261:     installation time, the master file is copied to the target one if and only
                   4262:     if the latter does not exist. Upon deinstallation, the target file is
                   4263:     removed provided that it was not modified by the installation.
                   4264: 
                   4265:     The difference between the two is that the latter prompts the administrator
                   4266:     to remove any files that may be left after deinstallation (because they
                   4267:     were not empty), while the former does not.
                   4268: 
1.31      wiz      4269:   * CONF_FILES_PERMS and REQD_FILES_PERMS contain tuples describing master
1.1       dsieger  4270:     files as well as their target locations. For each of them, it also
                   4271:     specifies their owner, their group and their numeric permissions, in this
                   4272:     order. For example:
                   4273: 
1.108     rillig   4274:     REQD_FILES_PERMS+=      ${PREFIX}/share/somefile ${VARBASE}/somefile \
                   4275:                             ${REAL_ROOT_USER} ${REAL_ROOT_GROUP} 0700
1.1       dsieger  4276: 
                   4277:     The difference between the two is exactly the same as their non-PERMS
                   4278:     counterparts.
                   4279: 
1.6       rillig   4280: 15.2. Configuration files
1.1       dsieger  4281: 
                   4282: Configuration files are special in the sense that they are installed in their
                   4283: own specific directory, PKG_SYSCONFDIR, and need special treatment during
                   4284: installation (most of which is automated by pkginstall). The main concept you
                   4285: must bear in mind is that files marked as configuration files are automatically
                   4286: copied to the right place (somewhere inside PKG_SYSCONFDIR) during installation
                   4287: if and only if they didn't exist before. Similarly, they will not be removed if
                   4288: they have local modifications. This ensures that administrators never lose any
                   4289: custom changes they may have made.
                   4290: 
1.6       rillig   4291: 15.2.1. How PKG_SYSCONFDIR is set
1.1       dsieger  4292: 
                   4293: As said before, the PKG_SYSCONFDIR variable specifies where configuration files
                   4294: shall be installed. Its contents are set based upon the following variables:
                   4295: 
                   4296:   * PKG_SYSCONFBASE: The configuration's root directory. Defaults to ${PREFIX}/
                   4297:     etc although it may be overridden by the user to point to his preferred
                   4298:     location (e.g., /etc, /etc/pkg, etc.). Packages must not use it directly.
                   4299: 
                   4300:   * PKG_SYSCONFSUBDIR: A subdirectory of PKG_SYSCONFBASE under which the
                   4301:     configuration files for the package being built shall be installed. The
                   4302:     definition of this variable only makes sense in the package's Makefile
                   4303:     (i.e., it is not user-customizable).
                   4304: 
1.68      asau     4305:     As an example, consider the Apache package, www/apache24, which places its
1.1       dsieger  4306:     configuration files under the httpd/ subdirectory of PKG_SYSCONFBASE. This
                   4307:     should be set in the package Makefile.
                   4308: 
                   4309:   * PKG_SYSCONFVAR: Specifies the name of the variable that holds this
                   4310:     package's configuration directory (if different from PKG_SYSCONFBASE). It
                   4311:     defaults to PKGBASE's value, and is always prefixed with PKG_SYSCONFDIR.
                   4312: 
                   4313:   * PKG_SYSCONFDIR.${PKG_SYSCONFVAR}: Holds the directory where the
                   4314:     configuration files for the package identified by PKG_SYSCONFVAR's shall be
                   4315:     placed.
                   4316: 
                   4317: Based on the above variables, pkginstall determines the value of
                   4318: PKG_SYSCONFDIR, which is the only variable that can be used within a package to
                   4319: refer to its configuration directory. The algorithm used to set its value is
                   4320: basically the following:
                   4321: 
                   4322:  1. If PKG_SYSCONFDIR.${PKG_SYSCONFVAR} is set, its value is used.
                   4323: 
                   4324:  2. If the previous variable is not defined but PKG_SYSCONFSUBDIR is set in the
                   4325:     package's Makefile, the resulting value is ${PKG_SYSCONFBASE}/$
                   4326:     {PKG_SYSCONFSUBDIR}.
                   4327: 
                   4328:  3. Otherwise, it is set to ${PKG_SYSCONFBASE}.
                   4329: 
                   4330: It is worth mentioning that ${PKG_SYSCONFDIR} is automatically added to
1.16      jnemeth  4331: OWN_DIRS. See Section 15.1.1, "Directory manipulation" what this means. This
                   4332: does not apply to subdirectories of ${PKG_SYSCONFDIR}, they still have to be
                   4333: created with OWN_DIRS or MAKE_DIRS.
1.1       dsieger  4334: 
1.6       rillig   4335: 15.2.2. Telling the software where configuration files are
1.1       dsieger  4336: 
                   4337: Given that pkgsrc (and users!) expect configuration files to be in a known
                   4338: place, you need to teach each package where it shall install its files. In some
                   4339: cases you will have to patch the package Makefiles to achieve it. If you are
                   4340: lucky, though, it may be as easy as passing an extra flag to the configuration
                   4341: script; this is the case of GNU Autoconf- generated files:
                   4342: 
                   4343: CONFIGURE_ARGS+= --sysconfdir=${PKG_SYSCONFDIR}
                   4344: 
                   4345: Note that this specifies where the package has to look for its configuration
                   4346: files, not where they will be originally installed (although the difference is
                   4347: never explicit, unfortunately).
                   4348: 
1.6       rillig   4349: 15.2.3. Patching installations
1.1       dsieger  4350: 
                   4351: As said before, pkginstall automatically handles configuration files. This
                   4352: means that the packages themselves must not touch the contents of $
                   4353: {PKG_SYSCONFDIR} directly. Bad news is that many software installation scripts
                   4354: will, out of the box, mess with the contents of that directory. So what is the
                   4355: correct procedure to fix this issue?
                   4356: 
                   4357: You must teach the package (usually by manually patching it) to install any
                   4358: configuration files under the examples hierarchy, share/examples/${PKGBASE}/.
                   4359: This way, the PLIST registers them and the administrator always has the
                   4360: original copies available.
                   4361: 
                   4362: Once the required configuration files are in place (i.e., under the examples
                   4363: hierarchy), the pkginstall framework can use them as master copies during the
                   4364: package installation to update what is in ${PKG_SYSCONFDIR}. To achieve this,
                   4365: the variables CONF_FILES and CONF_FILES_PERMS are used. Check out
1.6       rillig   4366: Section 15.1.2, "File manipulation" for information about their syntax and
1.1       dsieger  4367: their purpose. Here is an example, taken from the mail/mutt package:
                   4368: 
                   4369: EGDIR=        ${PREFIX}/share/doc/mutt/samples
                   4370: CONF_FILES=   ${EGDIR}/Muttrc ${PKG_SYSCONFDIR}/Muttrc
                   4371: 
                   4372: Note that the EGDIR variable is specific to that package and has no meaning
                   4373: outside it.
                   4374: 
1.6       rillig   4375: 15.2.4. Disabling handling of configuration files
1.1       dsieger  4376: 
                   4377: The automatic copying of config files can be toggled by setting the environment
                   4378: variable PKG_CONFIG prior to package installation.
                   4379: 
1.6       rillig   4380: 15.3. System startup scripts
1.1       dsieger  4381: 
                   4382: System startup scripts are special files because they must be installed in a
                   4383: place known by the underlying OS, usually outside the installation prefix.
1.6       rillig   4384: Therefore, the same rules described in Section 15.1, "Files and directories
1.1       dsieger  4385: outside the installation prefix" apply, and the same solutions can be used.
                   4386: However, pkginstall provides a special mechanism to handle these files.
                   4387: 
                   4388: In order to provide system startup scripts, the package has to:
                   4389: 
                   4390:  1. Store the script inside ${FILESDIR}, with the .sh suffix appended.
                   4391:     Considering the print/cups package as an example, it has a cupsd.sh in its
                   4392:     files directory.
                   4393: 
                   4394:  2. Tell pkginstall to handle it, appending the name of the script, without its
                   4395:     extension, to the RCD_SCRIPTS variable. Continuing the previous example:
                   4396: 
                   4397:     RCD_SCRIPTS+=   cupsd
                   4398: 
                   4399: Once this is done, pkginstall will do the following steps for each script in an
                   4400: automated fashion:
                   4401: 
                   4402:  1. Process the file found in the files directory applying all the
                   4403:     substitutions described in the FILES_SUBST variable.
                   4404: 
                   4405:  2. Copy the script from the files directory to the examples hierarchy, $
                   4406:     {PREFIX}/share/examples/rc.d/. Note that this master file must be
                   4407:     explicitly registered in the PLIST.
                   4408: 
                   4409:  3. Add code to the installation scripts to copy the startup script from the
                   4410:     examples hierarchy into the system-wide startup scripts directory.
                   4411: 
1.6       rillig   4412: 15.3.1. Disabling handling of system startup scripts
1.1       dsieger  4413: 
                   4414: The automatic copying of config files can be toggled by setting the environment
                   4415: variable PKG_RCD_SCRIPTS prior to package installation. Note that the scripts
                   4416: will be always copied inside the examples hierarchy, ${PREFIX}/share/examples/
                   4417: rc.d/, no matter what the value of this variable is.
                   4418: 
1.6       rillig   4419: 15.4. System users and groups
1.1       dsieger  4420: 
                   4421: If a package needs to create special users and/or groups during installation,
                   4422: it can do so by using the pkginstall framework.
                   4423: 
                   4424: Users can be created by adding entries to the PKG_USERS variable. Each entry
                   4425: has the following syntax:
                   4426: 
                   4427: user:group
                   4428: 
                   4429: Further specification of user details may be done by setting per-user
                   4430: variables. PKG_UID.user is the numeric UID for the user. PKG_GECOS.user is the
                   4431: user's description or comment. PKG_HOME.user is the user's home directory, and
                   4432: defaults to /nonexistent if not specified. PKG_SHELL.user is the user's shell,
                   4433: and defaults to /sbin/nologin if not specified.
                   4434: 
                   4435: Similarly, groups can be created by adding entries to the PKG_GROUPS variable,
                   4436: whose syntax is:
                   4437: 
                   4438: group
                   4439: 
                   4440: The numeric GID of the group may be set by defining PKG_GID.group.
                   4441: 
                   4442: If a package needs to create the users and groups at an earlier stage, then it
1.116     wiz      4443: can set USERGROUP_PHASE to either configure,build, or pre-install to indicate
                   4444: the phase before which the users and groups are created. In this case, the
                   4445: numeric UIDs and GIDs of the created users and groups are automatically
                   4446: hardcoded into the final installation scripts.
1.1       dsieger  4447: 
1.6       rillig   4448: 15.5. System shells
1.1       dsieger  4449: 
                   4450: Packages that install system shells should register them in the shell database,
                   4451: /etc/shells, to make things easier to the administrator. This must be done from
                   4452: the installation scripts to keep binary packages working on any system.
                   4453: pkginstall provides an easy way to accomplish this task.
                   4454: 
                   4455: When a package provides a shell interpreter, it has to set the PKG_SHELL
                   4456: variable to its absolute file name. This will add some hooks to the
                   4457: installation scripts to handle it. Consider the following example, taken from
                   4458: shells/zsh:
                   4459: 
                   4460: PKG_SHELL=      ${PREFIX}/bin/zsh
                   4461: 
1.6       rillig   4462: 15.5.1. Disabling shell registration
1.1       dsieger  4463: 
                   4464: The automatic registration of shell interpreters can be disabled by the
                   4465: administrator by setting the PKG_REGISTER_SHELLS environment variable to NO.
                   4466: 
1.6       rillig   4467: 15.6. Fonts
1.1       dsieger  4468: 
                   4469: Packages that install X11 fonts should update the database files that index the
                   4470: fonts within each fonts directory. This can easily be accomplished within the
                   4471: pkginstall framework.
                   4472: 
                   4473: When a package installs X11 fonts, it must list the directories in which fonts
                   4474: are installed in the FONTS_DIRS.type variables, where type can be one of "ttf",
                   4475: "type1" or "x11". This will add hooks to the installation scripts to run the
                   4476: appropriate commands to update the fonts database files within each of those
                   4477: directories. For convenience, if the directory path is relative, it is taken to
                   4478: be relative to the package's installation prefix. Consider the following
                   4479: example, taken from fonts/dbz-ttf:
                   4480: 
1.67      wiz      4481: FONTS_DIRS.ttf= ${PREFIX}/share/fonts/X11/TTF
1.1       dsieger  4482: 
1.6       rillig   4483: 15.6.1. Disabling automatic update of the fonts databases
1.1       dsieger  4484: 
                   4485: The automatic update of fonts databases can be disabled by the administrator by
                   4486: setting the PKG_UPDATE_FONTS_DB environment variable to NO.
                   4487: 
1.6       rillig   4488: Chapter 16. Options handling
1.1       dsieger  4489: 
                   4490: Table of Contents
                   4491: 
1.6       rillig   4492: 16.1. Global default options
                   4493: 16.2. Converting packages to use bsd.options.mk
                   4494: 16.3. Option Names
1.7       rillig   4495: 16.4. Determining the options of dependencies
1.1       dsieger  4496: 
                   4497: Many packages have the ability to be built to support different sets of
                   4498: features. bsd.options.mk is a framework in pkgsrc that provides generic
                   4499: handling of those options that determine different ways in which the packages
                   4500: can be built. It's possible for the user to specify exactly which sets of
                   4501: options will be built into a package or to allow a set of global default
                   4502: options apply.
                   4503: 
1.7       rillig   4504: There are two broad classes of behaviors that one might want to control via
                   4505: options. One is whether some particular feature is enabled in a program that
                   4506: will be built anyway, often by including or not including a dependency on some
                   4507: other package. The other is whether or not an additional program will be built
                   4508: as part of the package. Generally, it is better to make a split package for
                   4509: such additional programs instead of using options, because it enables binary
                   4510: packages to be built which can then be added separately. For example, the foo
                   4511: package might have minimal dependencies (those packages without which foo
                   4512: doesn't make sense), and then the foo-gfoo package might include the GTK
                   4513: frontend program gfoo. This is better than including a gtk option to foo that
                   4514: adds gfoo, because either that option is default, in which case binary users
                   4515: can't get foo without gfoo, or not default, in which case they can't get gfoo.
                   4516: With split packages, they can install foo without having GTK, and later decide
                   4517: to install gfoo (pulling in GTK at that time). This is an advantage to source
                   4518: users too, avoiding the need for rebuilds.
                   4519: 
                   4520: Plugins with widely varying dependencies should usually be split instead of
                   4521: options.
                   4522: 
                   4523: It is often more work to maintain split packages, especially if the upstream
                   4524: package does not support this. The decision of split vs. option should be made
                   4525: based on the likelihood that users will want or object to the various pieces,
                   4526: the size of the dependencies that are included, and the amount of work.
                   4527: 
                   4528: A further consideration is licensing. Non-free parts, or parts that depend on
                   4529: non-free dependencies (especially plugins) should almost always be split if
                   4530: feasible.
                   4531: 
1.6       rillig   4532: 16.1. Global default options
1.1       dsieger  4533: 
                   4534: Global default options are listed in PKG_DEFAULT_OPTIONS, which is a list of
                   4535: the options that should be built into every package if that option is
1.4       rillig   4536: supported. This variable should be set in mk.conf.
1.1       dsieger  4537: 
1.6       rillig   4538: 16.2. Converting packages to use bsd.options.mk
1.1       dsieger  4539: 
                   4540: The following example shows how bsd.options.mk should be used by the
                   4541: hypothetical ``wibble'' package, either in the package Makefile, or in a file,
                   4542: e.g. options.mk, that is included by the main package Makefile.
                   4543: 
                   4544: PKG_OPTIONS_VAR=                PKG_OPTIONS.wibble
                   4545: PKG_SUPPORTED_OPTIONS=          wibble-foo ldap
                   4546: PKG_OPTIONS_OPTIONAL_GROUPS=    database
                   4547: PKG_OPTIONS_GROUP.database=     mysql pgsql
                   4548: PKG_SUGGESTED_OPTIONS=          wibble-foo
                   4549: PKG_OPTIONS_LEGACY_VARS+=       WIBBLE_USE_OPENLDAP:ldap
                   4550: PKG_OPTIONS_LEGACY_OPTS+=       foo:wibble-foo
                   4551: 
                   4552: .include "../../mk/bsd.prefs.mk"
                   4553: 
                   4554: # this package was previously named wibble2
                   4555: .if defined(PKG_OPTIONS.wibble2)
                   4556: PKG_LEGACY_OPTIONS+=            ${PKG_OPTIONS.wibble2}
                   4557: PKG_OPTIONS_DEPRECATED_WARNINGS+= \
                   4558:         "Deprecated variable PKG_OPTIONS.wibble2 used, use ${PKG_OPTIONS_VAR} instead."
                   4559: .endif
                   4560: 
                   4561: .include "../../mk/bsd.options.mk"
                   4562: 
                   4563: # Package-specific option-handling
                   4564: 
                   4565: ###
                   4566: ### FOO support
                   4567: ###
                   4568: .if !empty(PKG_OPTIONS:Mwibble-foo)
                   4569: CONFIGURE_ARGS+=    --enable-foo
                   4570: .endif
                   4571: 
                   4572: ###
                   4573: ### LDAP support
                   4574: ###
                   4575: .if !empty(PKG_OPTIONS:Mldap)
                   4576: .  include "../../databases/openldap-client/buildlink3.mk"
                   4577: CONFIGURE_ARGS+=    --enable-ldap=${BUILDLINK_PREFIX.openldap-client}
                   4578: .endif
                   4579: 
                   4580: ###
                   4581: ### database support
                   4582: ###
                   4583: .if !empty(PKG_OPTIONS:Mmysql)
                   4584: .  include "../../mk/mysql.buildlink3.mk"
                   4585: .endif
                   4586: .if !empty(PKG_OPTIONS:Mpgsql)
                   4587: .  include "../../mk/pgsql.buildlink3.mk"
                   4588: .endif
                   4589: 
                   4590: The first section contains the information about which build options are
                   4591: supported by the package, and any default options settings if needed.
                   4592: 
                   4593:  1. PKG_OPTIONS_VAR is the name of the make(1) variable that the user can set
                   4594:     to override the default options. It should be set to PKG_OPTIONS.pkgbase.
                   4595:     Do not set it to PKG_OPTIONS.${PKGBASE}, since PKGBASE is not defined at
                   4596:     the point where the options are processed.
                   4597: 
                   4598:  2. PKG_SUPPORTED_OPTIONS is a list of build options supported by the package.
                   4599: 
                   4600:  3. PKG_OPTIONS_OPTIONAL_GROUPS is a list of names of groups of mutually
                   4601:     exclusive options. The options in each group are listed in
                   4602:     PKG_OPTIONS_GROUP.groupname. The most specific setting of any option from
                   4603:     the group takes precedence over all other options in the group. Options
                   4604:     from the groups will be automatically added to PKG_SUPPORTED_OPTIONS.
                   4605: 
                   4606:  4. PKG_OPTIONS_REQUIRED_GROUPS is like PKG_OPTIONS_OPTIONAL_GROUPS, but
                   4607:     building the packages will fail if no option from the group is selected.
                   4608: 
                   4609:  5. PKG_OPTIONS_NONEMPTY_SETS is a list of names of sets of options. At least
                   4610:     one option from each set must be selected. The options in each set are
                   4611:     listed in PKG_OPTIONS_SET.setname. Options from the sets will be
                   4612:     automatically added to PKG_SUPPORTED_OPTIONS. Building the package will
                   4613:     fail if no option from the set is selected.
                   4614: 
                   4615:  6. PKG_SUGGESTED_OPTIONS is a list of build options which are enabled by
                   4616:     default.
                   4617: 
                   4618:  7. PKG_OPTIONS_LEGACY_VARS is a list of "USE_VARIABLE:option" pairs that map
1.4       rillig   4619:     legacy mk.conf variables to their option counterparts. Pairs should be
1.1       dsieger  4620:     added with "+=" to keep the listing of global legacy variables. A warning
                   4621:     will be issued if the user uses a legacy variable.
                   4622: 
                   4623:  8. PKG_OPTIONS_LEGACY_OPTS is a list of "old-option:new-option" pairs that map
                   4624:     options that have been renamed to their new counterparts. Pairs should be
                   4625:     added with "+=" to keep the listing of global legacy options. A warning
                   4626:     will be issued if the user uses a legacy option.
                   4627: 
                   4628:  9. PKG_LEGACY_OPTIONS is a list of options implied by deprecated variables
                   4629:     used. This can be used for cases that neither PKG_OPTIONS_LEGACY_VARS nor
                   4630:     PKG_OPTIONS_LEGACY_OPTS can handle, e. g. when PKG_OPTIONS_VAR is renamed.
                   4631: 
                   4632: 10. PKG_OPTIONS_DEPRECATED_WARNINGS is a list of warnings about deprecated
                   4633:     variables or options used, and what to use instead.
                   4634: 
                   4635: A package should never modify PKG_DEFAULT_OPTIONS or the variable named in
                   4636: PKG_OPTIONS_VAR. These are strictly user-settable. To suggest a default set of
                   4637: options, use PKG_SUGGESTED_OPTIONS.
                   4638: 
                   4639: PKG_OPTIONS_VAR must be defined before including bsd.options.mk. If none of
                   4640: PKG_SUPPORTED_OPTIONS, PKG_OPTIONS_OPTIONAL_GROUPS, and
                   4641: PKG_OPTIONS_REQUIRED_GROUPS are defined (as can happen with platform-specific
                   4642: options if none of them is supported on the current platform), PKG_OPTIONS is
                   4643: set to the empty list and the package is otherwise treated as not using the
                   4644: options framework.
                   4645: 
                   4646: After the inclusion of bsd.options.mk, the variable PKG_OPTIONS contains the
                   4647: list of selected build options, properly filtered to remove unsupported and
                   4648: duplicate options.
                   4649: 
                   4650: The remaining sections contain the logic that is specific to each option. The
                   4651: correct way to check for an option is to check whether it is listed in
                   4652: PKG_OPTIONS:
                   4653: 
                   4654: .if !empty(PKG_OPTIONS:Moption)
                   4655: 
1.6       rillig   4656: 16.3. Option Names
1.1       dsieger  4657: 
                   4658: Options that enable similar features in different packages (like optional
                   4659: support for a library) should use a common name in all packages that support it
                   4660: (like the name of the library). If another package already has an option with
                   4661: the same meaning, use the same name.
                   4662: 
                   4663: Options that enable features specific to one package, where it's unlikely that
                   4664: another (unrelated) package has the same (or a similar) optional feature,
                   4665: should use a name prefixed with pkgname-.
                   4666: 
                   4667: If a group of related packages share an optional feature specific to that
                   4668: group, prefix it with the name of the "main" package (e. g.
                   4669: djbware-errno-hack).
                   4670: 
                   4671: For new options, add a line to mk/defaults/options.description. Lines have two
                   4672: fields, separated by tab. The first field is the option name, the second its
                   4673: description. The description should be a whole sentence (starting with an
                   4674: uppercase letter and ending with a period) that describes what enabling the
                   4675: option does. E. g. "Enable ispell support." The file is sorted by option names.
                   4676: 
1.7       rillig   4677: 16.4. Determining the options of dependencies
                   4678: 
                   4679: When writing buildlink3.mk files, it is often necessary to list different
                   4680: dependencies based on the options with which the package was built. For
                   4681: querying these options, the file pkgsrc/mk/pkg-build-options.mk should be used.
                   4682: A typical example looks like this:
                   4683: 
                   4684: pkgbase := libpurple
                   4685: .include "../../mk/pkg-build-options.mk"
                   4686: 
                   4687: .if !empty(PKG_BUILD_OPTIONS.libpurple:Mdbus)
                   4688: ...
                   4689: .endif
                   4690: 
                   4691: Including pkg-build-options.mk here will set the variable
                   4692: PKG_BUILD_OPTIONS.libpurple to the build options of the libpurple package,
                   4693: which can then be queried like PKG_OPTIONS in the options.mk file. See the file
                   4694: pkg-build-options.mk for more details.
                   4695: 
1.6       rillig   4696: Chapter 17. The build process
1.1       dsieger  4697: 
                   4698: Table of Contents
                   4699: 
1.6       rillig   4700: 17.1. Introduction
                   4701: 17.2. Program location
                   4702: 17.3. Directories used during the build process
                   4703: 17.4. Running a phase
                   4704: 17.5. The fetch phase
                   4705: 
                   4706:     17.5.1. What to fetch and where to get it from
                   4707:     17.5.2. How are the files fetched?
                   4708: 
                   4709: 17.6. The checksum phase
                   4710: 17.7. The extract phase
                   4711: 17.8. The patch phase
                   4712: 17.9. The tools phase
                   4713: 17.10. The wrapper phase
                   4714: 17.11. The configure phase
                   4715: 17.12. The build phase
                   4716: 17.13. The test phase
                   4717: 17.14. The install phase
                   4718: 17.15. The package phase
                   4719: 17.16. Cleaning up
                   4720: 17.17. Other helpful targets
1.1       dsieger  4721: 
1.6       rillig   4722: 17.1. Introduction
1.1       dsieger  4723: 
                   4724: This chapter gives a detailed description on how a package is built. Building a
                   4725: package is separated into different phases (for example fetch, build, install),
1.19      snj      4726: all of which are described in the following sections. Each phase is split into
                   4727: so-called stages, which take the name of the containing phase, prefixed by one
                   4728: of pre-, do- or post-. (Examples are pre-configure, post-build.) Most of the
                   4729: actual work is done in the do-* stages.
1.1       dsieger  4730: 
                   4731: Never override the regular targets (like fetch), if you have to, override the
                   4732: do-* ones instead.
                   4733: 
                   4734: The basic steps for building a program are always the same. First the program's
                   4735: source (distfile) must be brought to the local system and then extracted. After
                   4736: any pkgsrc-specific patches to compile properly are applied, the software can
                   4737: be configured, then built (usually by compiling), and finally the generated
                   4738: binaries, etc. can be put into place on the system.
                   4739: 
                   4740: To get more details about what is happening at each step, you can set the
                   4741: PKG_VERBOSE variable, or the PATCH_DEBUG variable if you are just interested in
                   4742: more details about the patch step.
                   4743: 
1.6       rillig   4744: 17.2. Program location
1.1       dsieger  4745: 
                   4746: Before outlining the process performed by the NetBSD package system in the next
                   4747: section, here's a brief discussion on where programs are installed, and which
                   4748: variables influence this.
                   4749: 
                   4750: The automatic variable PREFIX indicates where all files of the final program
                   4751: shall be installed. It is usually set to LOCALBASE (/usr/pkg), or CROSSBASE for
                   4752: pkgs in the cross category. The value of PREFIX needs to be put into the
                   4753: various places in the program's source where paths to these files are encoded.
1.6       rillig   4754: See Section 11.3, "patches/*" and Section 19.3.1, "Shared libraries - libtool"
1.1       dsieger  4755: for more details.
                   4756: 
                   4757: When choosing which of these variables to use, follow the following rules:
                   4758: 
                   4759:   * PREFIX always points to the location where the current pkg will be
1.25      wiz      4760:     installed. When referring to a pkg's own installation path, use "${PREFIX}"
                   4761:     .
1.1       dsieger  4762: 
                   4763:   * LOCALBASE is where all non-X11 pkgs are installed. If you need to construct
                   4764:     a -I or -L argument to the compiler to find includes and libraries
                   4765:     installed by another non-X11 pkg, use "${LOCALBASE}". The name LOCALBASE
                   4766:     stems from FreeBSD, which installed all packages in /usr/local. As pkgsrc
                   4767:     leaves /usr/local for the system administrator, this variable is a
                   4768:     misnomer.
                   4769: 
                   4770:   * X11BASE is where the actual X11 distribution (from xsrc, etc.) is
                   4771:     installed. When looking for standard X11 includes (not those installed by a
                   4772:     package), use "${X11BASE}".
                   4773: 
1.99      sevan    4774:   * X11-based packages using imake must set USE_IMAKE to be installed correctly
                   4775:     under LOCALBASE.
1.1       dsieger  4776: 
                   4777:   * Within ${PREFIX}, packages should install files according to hier(7), with
                   4778:     the exception that manual pages go into ${PREFIX}/man, not ${PREFIX}/share/
                   4779:     man.
                   4780: 
1.6       rillig   4781: 17.3. Directories used during the build process
1.1       dsieger  4782: 
1.14      jmcneill 4783: When building a package, various directories are used to store source files,
1.1       dsieger  4784: temporary files, pkgsrc-internal files, and so on. These directories are
                   4785: explained here.
                   4786: 
                   4787: Some of the directory variables contain relative pathnames. There are two
                   4788: common base directories for these relative directories: PKGSRCDIR/PKGPATH is
                   4789: used for directories that are pkgsrc-specific. WRKSRC is used for directories
                   4790: inside the package itself.
                   4791: 
                   4792: PKGSRCDIR
                   4793: 
                   4794:     This is an absolute pathname that points to the pkgsrc root directory.
                   4795:     Generally, you don't need it.
                   4796: 
                   4797: PKGDIR
                   4798: 
                   4799:     This is an absolute pathname that points to the current package.
                   4800: 
                   4801: PKGPATH
                   4802: 
                   4803:     This is a pathname relative to PKGSRCDIR that points to the current
                   4804:     package.
                   4805: 
                   4806: WRKDIR
                   4807: 
                   4808:     This is an absolute pathname pointing to the directory where all work takes
                   4809:     place. The distfiles are extracted to this directory. It also contains
                   4810:     temporary directories and log files used by the various pkgsrc frameworks,
                   4811:     like buildlink or the wrappers.
                   4812: 
                   4813: WRKSRC
                   4814: 
                   4815:     This is an absolute pathname pointing to the directory where the distfiles
                   4816:     are extracted. It is usually a direct subdirectory of WRKDIR, and often
                   4817:     it's the only directory entry that isn't hidden. This variable may be
                   4818:     changed by a package Makefile.
                   4819: 
1.14      jmcneill 4820: The CREATE_WRKDIR_SYMLINK definition takes either the value yes or no and
1.15      rillig   4821: defaults to no. It indicates whether a symbolic link to the WRKDIR is to be
1.14      jmcneill 4822: created in the pkgsrc entry's directory. If users would like to have their
                   4823: pkgsrc trees behave in a read-only manner, then the value of
                   4824: CREATE_WRKDIR_SYMLINK should be set to no.
                   4825: 
1.6       rillig   4826: 17.4. Running a phase
1.1       dsieger  4827: 
                   4828: You can run a particular phase by typing make phase, where phase is the name of
                   4829: the phase. This will automatically run all phases that are required for this
                   4830: phase. The default phase is build, that is, when you run make without
                   4831: parameters in a package directory, the package will be built, but not
                   4832: installed.
                   4833: 
1.6       rillig   4834: 17.5. The fetch phase
1.1       dsieger  4835: 
                   4836: The first step in building a package is to fetch the distribution files
1.25      wiz      4837: (distfiles) from the sites that are providing them. This is the task of the 
1.1       dsieger  4838: fetch phase.
                   4839: 
1.6       rillig   4840: 17.5.1. What to fetch and where to get it from
1.1       dsieger  4841: 
                   4842: In simple cases, MASTER_SITES defines all URLs from where the distfile, whose
                   4843: name is derived from the DISTNAME variable, is fetched. The more complicated
                   4844: cases are described below.
                   4845: 
                   4846: The variable DISTFILES specifies the list of distfiles that have to be fetched.
1.66      asau     4847: Its value defaults to ${DEFAULT_DISTFILES} and its value is ${DISTNAME}$
                   4848: {EXTRACT_SUFX}, so that most packages don't need to define it at all.
                   4849: EXTRACT_SUFX is .tar.gz by default, but can be changed freely. Note that if
                   4850: your package requires additional distfiles to the default one, you cannot just
                   4851: append the additional filenames using the += operator, but you have write for
                   4852: example:
1.1       dsieger  4853: 
1.66      asau     4854: DISTFILES=      ${DEFAULT_DISTFILES} additional-files.tar.gz
1.1       dsieger  4855: 
                   4856: Each distfile is fetched from a list of sites, usually MASTER_SITES. If the
                   4857: package has multiple DISTFILES or multiple PATCHFILES from different sites, you
                   4858: can set SITES.distfile to the list of URLs where the file distfile (including
                   4859: the suffix) can be found.
                   4860: 
                   4861: DISTFILES=      ${DISTNAME}${EXTRACT_SUFX}
                   4862: DISTFILES+=     foo-file.tar.gz
                   4863: SITES.foo-file.tar.gz= \
                   4864: http://www.somewhere.com/somehow/ \
                   4865: http://www.somewhereelse.com/mirror/somehow/
                   4866: 
                   4867: When actually fetching the distfiles, each item from MASTER_SITES or SITES.*
                   4868: gets the name of each distfile appended to it, without an intermediate slash.
                   4869: Therefore, all site values have to end with a slash or other separator
                   4870: character. This allows for example to set MASTER_SITES to a URL of a CGI script
                   4871: that gets the name of the distfile as a parameter. In this case, the definition
                   4872: would look like:
                   4873: 
                   4874: MASTER_SITES=   http://www.example.com/download.cgi?file=
                   4875: 
1.23      jakllsch 4876: The exception to this rule are URLs starting with a dash. In that case the URL
                   4877: is taken as is, fetched and the result stored under the name of the distfile.
1.66      asau     4878: You can use this style for the case when the download URL style does not match
                   4879: the above common case. For example, if permanent download URL is a redirector
                   4880: to the real download URL, or the download file name is offered by an HTTP
                   4881: Content-Disposition header. In the following example, foo-1.0.0.tar.gz will be
                   4882: created instead of the default v1.0.0.tar.gz.
                   4883: 
                   4884: DISTNAME=       foo-1.0.0
                   4885: MASTER_SITES=   -http://www.example.com/archive/v1.0.0.tar.gz
1.23      jakllsch 4886: 
1.1       dsieger  4887: There are some predefined values for MASTER_SITES, which can be used in
                   4888: packages. The names of the variables should speak for themselves.
                   4889: 
                   4890: ${MASTER_SITE_APACHE}
                   4891: ${MASTER_SITE_BACKUP}
                   4892: ${MASTER_SITE_CYGWIN}
                   4893: ${MASTER_SITE_DEBIAN}
                   4894: ${MASTER_SITE_FREEBSD}
                   4895: ${MASTER_SITE_FREEBSD_LOCAL}
                   4896: ${MASTER_SITE_GENTOO}
                   4897: ${MASTER_SITE_GNOME}
                   4898: ${MASTER_SITE_GNU}
                   4899: ${MASTER_SITE_GNUSTEP}
1.66      asau     4900: ${MASTER_SITE_HASKELL_HACKAGE}
1.1       dsieger  4901: ${MASTER_SITE_IFARCHIVE}
                   4902: ${MASTER_SITE_KDE}
                   4903: ${MASTER_SITE_MOZILLA}
1.66      asau     4904: ${MASTER_SITE_MOZILLA_ALL}
                   4905: ${MASTER_SITE_MOZILLA_ESR}
1.1       dsieger  4906: ${MASTER_SITE_MYSQL}
1.66      asau     4907: ${MASTER_SITE_NETLIB}
1.1       dsieger  4908: ${MASTER_SITE_OPENOFFICE}
1.98      ryoon    4909: ${MASTER_SITE_OSDN}
1.1       dsieger  4910: ${MASTER_SITE_PERL_CPAN}
                   4911: ${MASTER_SITE_PGSQL}
1.66      asau     4912: ${MASTER_SITE_RUBYGEMS}
1.1       dsieger  4913: ${MASTER_SITE_R_CRAN}
                   4914: ${MASTER_SITE_SOURCEFORGE}
                   4915: ${MASTER_SITE_SUNSITE}
                   4916: ${MASTER_SITE_SUSE}
                   4917: ${MASTER_SITE_TEX_CTAN}
                   4918: ${MASTER_SITE_XCONTRIB}
                   4919: ${MASTER_SITE_XEMACS}
1.66      asau     4920: ${MASTER_SITE_XORG}
1.1       dsieger  4921: 
                   4922: Some explanations for the less self-explaining ones: MASTER_SITE_BACKUP
                   4923: contains backup sites for packages that are maintained in ftp://ftp.NetBSD.org/
1.27      wiz      4924: pub/pkgsrc/distfiles/${DIST_SUBDIR}. MASTER_SITE_LOCAL contains local package
1.26      spz      4925: source distributions that are maintained in ftp://ftp.NetBSD.org/pub/pkgsrc/
                   4926: distfiles/LOCAL_PORTS/.
1.1       dsieger  4927: 
                   4928: If you choose one of these predefined sites, you may want to specify a
                   4929: subdirectory of that site. Since these macros may expand to more than one
                   4930: actual site, you must use the following construct to specify a subdirectory:
                   4931: 
                   4932: MASTER_SITES=   ${MASTER_SITE_GNU:=subdirectory/name/}
                   4933: MASTER_SITES=   ${MASTER_SITE_SOURCEFORGE:=project_name/}
                   4934: 
                   4935: Note the trailing slash after the subdirectory name.
                   4936: 
1.6       rillig   4937: 17.5.2. How are the files fetched?
1.1       dsieger  4938: 
                   4939: The fetch phase makes sure that all the distfiles exist in a local directory
                   4940: (DISTDIR, which can be set by the pkgsrc user). If the files do not exist, they
                   4941: are fetched using commands of the form
                   4942: 
                   4943: ${FETCH_CMD} ${FETCH_BEFORE_ARGS} ${site}${file} ${FETCH_AFTER_ARGS}
                   4944: 
                   4945: where ${site} varies through several possibilities in turn: first,
                   4946: MASTER_SITE_OVERRIDE is tried, then the sites specified in either SITES.file if
                   4947: defined, else MASTER_SITES or PATCH_SITES, as applies, then finally the value
                   4948: of MASTER_SITE_BACKUP. The order of all except the first and the last can be
                   4949: optionally sorted by the user, via setting either MASTER_SORT_RANDOM, and
                   4950: MASTER_SORT_AWK or MASTER_SORT_REGEX.
                   4951: 
1.16      jnemeth  4952: The specific command and arguments used depend on the FETCH_USING parameter.
                   4953: The example above is for FETCH_USING=custom.
                   4954: 
1.1       dsieger  4955: The distfiles mirror run by the NetBSD Foundation uses the mirror-distfiles
                   4956: target to mirror the distfiles, if they are freely distributable. Packages
                   4957: setting NO_SRC_ON_FTP (usually to "${RESTRICTED}") will not have their
                   4958: distfiles mirrored.
                   4959: 
1.6       rillig   4960: 17.6. The checksum phase
1.1       dsieger  4961: 
                   4962: After the distfile(s) are fetched, their checksum is generated and compared
                   4963: with the checksums stored in the distinfo file. If the checksums don't match,
                   4964: the build is aborted. This is to ensure the same distfile is used for building,
                   4965: and that the distfile wasn't changed, e.g. by some malign force, deliberately
                   4966: changed distfiles on the master distribution site or network lossage.
                   4967: 
1.6       rillig   4968: 17.7. The extract phase
1.1       dsieger  4969: 
                   4970: When the distfiles are present on the local system, they need to be extracted,
                   4971: as they usually come in the form of some compressed archive format.
                   4972: 
                   4973: By default, all DISTFILES are extracted. If you only need some of them, you can
                   4974: set the EXTRACT_ONLY variable to the list of those files.
                   4975: 
                   4976: Extracting the files is usually done by a little program, mk/extract/extract,
                   4977: which already knows how to extract various archive formats, so most likely you
                   4978: will not need to change anything here. But if you need, the following variables
                   4979: may help you:
                   4980: 
                   4981: EXTRACT_OPTS_{BIN,LHA,PAX,RAR,TAR,ZIP,ZOO}
                   4982: 
                   4983:     Use these variables to override the default options for an extract command,
                   4984:     which are defined in mk/extract/extract.
                   4985: 
                   4986: EXTRACT_USING
                   4987: 
1.14      jmcneill 4988:     This variable can be set to bsdtar, gtar, nbtar (which is the default
                   4989:     value), pax, or an absolute pathname pointing to the command with which tar
                   4990:     archives should be extracted. It is preferred to choose bsdtar over gtar if
                   4991:     NetBSD's pax-as-tar is not good enough.
1.1       dsieger  4992: 
                   4993: If the extract program doesn't serve your needs, you can also override the
                   4994: EXTRACT_CMD variable, which holds the command used for extracting the files.
                   4995: This command is executed in the ${WRKSRC} directory. During execution of this
                   4996: command, the shell variable extract_file holds the absolute pathname of the
                   4997: file that is going to be extracted.
                   4998: 
                   4999: And if that still does not suffice, you can override the do-extract target in
                   5000: the package Makefile.
                   5001: 
1.6       rillig   5002: 17.8. The patch phase
1.1       dsieger  5003: 
                   5004: After extraction, all the patches named by the PATCHFILES, those present in the
                   5005: patches subdirectory of the package as well as in $LOCALPATCHES/$PKGPATH (e.g.
                   5006: /usr/local/patches/graphics/png) are applied. Patchfiles ending in .Z or .gz
                   5007: are uncompressed before they are applied, files ending in .orig or .rej are
                   5008: ignored. Any special options to patch(1) can be handed in PATCH_DIST_ARGS. See
1.6       rillig   5009: Section 11.3, "patches/*" for more details.
1.1       dsieger  5010: 
                   5011: By default patch(1) is given special args to make it fail if the patches apply
                   5012: with some lines of fuzz. Please fix (regen) the patches so that they apply
                   5013: cleanly. The rationale behind this is that patches that don't apply cleanly may
                   5014: end up being applied in the wrong place, and cause severe harm there.
                   5015: 
1.6       rillig   5016: 17.9. The tools phase
1.1       dsieger  5017: 
1.6       rillig   5018: This is covered in Chapter 18, Tools needed for building or running.
1.1       dsieger  5019: 
1.6       rillig   5020: 17.10. The wrapper phase
1.1       dsieger  5021: 
                   5022: This phase creates wrapper programs for the compilers and linkers. The
                   5023: following variables can be used to tweak the wrappers.
                   5024: 
                   5025: ECHO_WRAPPER_MSG
                   5026: 
                   5027:     The command used to print progress messages. Does nothing by default. Set
                   5028:     to ${ECHO} to see the progress messages.
                   5029: 
                   5030: WRAPPER_DEBUG
                   5031: 
                   5032:     This variable can be set to yes (default) or no, depending on whether you
                   5033:     want additional information in the wrapper log file.
                   5034: 
                   5035: WRAPPER_UPDATE_CACHE
                   5036: 
                   5037:     This variable can be set to yes or no, depending on whether the wrapper
                   5038:     should use its cache, which will improve the speed. The default value is
                   5039:     yes, but is forced to no if the platform does not support it.
                   5040: 
                   5041: WRAPPER_REORDER_CMDS
                   5042: 
                   5043:     A list of reordering commands. A reordering command has the form reorder:l:
                   5044:     lib1:lib2. It ensures that that -llib1 occurs before -llib2.
                   5045: 
                   5046: WRAPPER_TRANSFORM_CMDS
                   5047: 
                   5048:     A list of transformation commands. [TODO: investigate further]
                   5049: 
1.6       rillig   5050: 17.11. The configure phase
1.1       dsieger  5051: 
                   5052: Most pieces of software need information on the header files, system calls, and
                   5053: library routines which are available on the platform they run on. The process
                   5054: of determining this information is known as configuration, and is usually
                   5055: automated. In most cases, a script is supplied with the distfiles, and its
                   5056: invocation results in generation of header files, Makefiles, etc.
                   5057: 
                   5058: If the package contains a configure script, this can be invoked by setting
                   5059: HAS_CONFIGURE to "yes". If the configure script is a GNU autoconf script, you
                   5060: should set GNU_CONFIGURE to "yes" instead. What happens in the configure phase
                   5061: is roughly:
                   5062: 
                   5063: .for d in ${CONFIGURE_DIRS}
                   5064:         cd ${WRKSRC} \
                   5065:         && cd ${d} \
                   5066:         && env ${CONFIGURE_ENV} ${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}
                   5067: .endfor
                   5068: 
                   5069: CONFIGURE_DIRS (default: ".") is a list of pathnames relative to WRKSRC. In
                   5070: each of these directories, the configure script is run with the environment
                   5071: CONFIGURE_ENV and arguments CONFIGURE_ARGS. The variables CONFIGURE_ENV,
                   5072: CONFIGURE_SCRIPT (default: "./configure") and CONFIGURE_ARGS may all be changed
                   5073: by the package.
                   5074: 
1.38      wiz      5075: If the program uses the Perl way of configuration (mainly Perl modules, but not
                   5076: only), i.e. a file called Makefile.PL, it should include ../../lang/perl5/
                   5077: module.mk. To set any parameter for Makefile.PL use the MAKE_PARAMS variable
                   5078: (e.g., MAKE_PARAMS+=foo=bar
                   5079: 
1.1       dsieger  5080: If the program uses an Imakefile for configuration, the appropriate steps can
1.99      sevan    5081: be invoked by setting USE_IMAKE to "yes". If you only need xmkmf, add it to
                   5082: USE_TOOLS. You can add variables to xmkmf's environment by adding them to the
                   5083: SCRIPTS_ENV variable.
1.1       dsieger  5084: 
1.11      rillig   5085: If the program uses cmake for configuration, the appropriate steps can be
                   5086: invoked by setting USE_CMAKE to "yes". You can add variables to cmake's
                   5087: environment by adding them to the CONFIGURE_ENV variable and arguments to cmake
                   5088: by adding them to the CMAKE_ARGS variable. The top directory argument is given
                   5089: by the CMAKE_ARG_PATH variable, that defaults to "." (relative to
                   5090: CONFIGURE_DIRS)
                   5091: 
1.1       dsieger  5092: If there is no configure step at all, set NO_CONFIGURE to "yes".
                   5093: 
1.6       rillig   5094: 17.12. The build phase
1.1       dsieger  5095: 
                   5096: For building a package, a rough equivalent of the following code is executed.
                   5097: 
                   5098: .for d in ${BUILD_DIRS}
                   5099:         cd ${WRKSRC} \
                   5100:         && cd ${d} \
                   5101:         && env ${MAKE_ENV} \
                   5102:             ${MAKE_PROGRAM} ${BUILD_MAKE_FLAGS} \
                   5103:                 -f ${MAKE_FILE} \
                   5104:                 ${BUILD_TARGET}
                   5105: .endfor
                   5106: 
                   5107: BUILD_DIRS (default: ".") is a list of pathnames relative to WRKSRC. In each of
                   5108: these directories, MAKE_PROGRAM is run with the environment MAKE_ENV and
                   5109: arguments BUILD_MAKE_FLAGS. The variables MAKE_ENV, BUILD_MAKE_FLAGS, MAKE_FILE
                   5110: and BUILD_TARGET may all be changed by the package.
                   5111: 
1.25      wiz      5112: The default value of MAKE_PROGRAM is "gmake" if USE_TOOLS contains "gmake", "
                   5113: make" otherwise. The default value of MAKE_FILE is "Makefile", and BUILD_TARGET
                   5114: defaults to "all".
1.1       dsieger  5115: 
                   5116: If there is no build step at all, set NO_BUILD to "yes".
                   5117: 
1.6       rillig   5118: 17.13. The test phase
1.1       dsieger  5119: 
                   5120: [TODO]
                   5121: 
1.6       rillig   5122: 17.14. The install phase
1.1       dsieger  5123: 
                   5124: Once the build stage has completed, the final step is to install the software
                   5125: in public directories, so users can access the programs and files.
                   5126: 
                   5127: In the install phase, a rough equivalent of the following code is executed.
                   5128: Additionally, before and after this code, much magic is performed to do
                   5129: consistency checks, registering the package, and so on.
                   5130: 
                   5131: .for d in ${INSTALL_DIRS}
                   5132:         cd ${WRKSRC} \
                   5133:         && cd ${d} \
                   5134:         && env ${MAKE_ENV} \
                   5135:             ${MAKE_PROGRAM} ${INSTALL_MAKE_FLAGS} \
                   5136:                 -f ${MAKE_FILE} \
                   5137:                 ${INSTALL_TARGET}
                   5138: .endfor
                   5139: 
                   5140: The variable's meanings are analogous to the ones in the build phase.
                   5141: INSTALL_DIRS defaults to BUILD_DIRS. INSTALL_TARGET is "install" by default,
                   5142: plus "install.man" if USE_IMAKE is defined and NO_INSTALL_MANPAGES is not
                   5143: defined.
                   5144: 
                   5145: In the install phase, the following variables are useful. They are all
                   5146: variations of the install(1) command that have the owner, group and permissions
                   5147: preset. INSTALL is the plain install command. The specialized variants,
                   5148: together with their intended use, are:
                   5149: 
                   5150: INSTALL_PROGRAM_DIR
                   5151: 
                   5152:     directories that contain binaries
                   5153: 
                   5154: INSTALL_SCRIPT_DIR
                   5155: 
                   5156:     directories that contain scripts
                   5157: 
                   5158: INSTALL_LIB_DIR
                   5159: 
                   5160:     directories that contain shared and static libraries
                   5161: 
                   5162: INSTALL_DATA_DIR
                   5163: 
                   5164:     directories that contain data files
                   5165: 
                   5166: INSTALL_MAN_DIR
                   5167: 
                   5168:     directories that contain man pages
                   5169: 
1.100     leot     5170: INSTALL_GAME_DIR
                   5171: 
                   5172:     directories that contain data files for games
                   5173: 
1.1       dsieger  5174: INSTALL_PROGRAM
                   5175: 
                   5176:     binaries that can be stripped from debugging symbols
                   5177: 
                   5178: INSTALL_SCRIPT
                   5179: 
                   5180:     binaries that cannot be stripped
                   5181: 
                   5182: INSTALL_GAME
                   5183: 
                   5184:     game binaries
                   5185: 
                   5186: INSTALL_LIB
                   5187: 
                   5188:     shared and static libraries
                   5189: 
                   5190: INSTALL_DATA
                   5191: 
                   5192:     data files
                   5193: 
                   5194: INSTALL_GAME_DATA
                   5195: 
                   5196:     data files for games
                   5197: 
                   5198: INSTALL_MAN
                   5199: 
                   5200:     man pages
                   5201: 
                   5202: Some other variables are:
                   5203: 
1.106     tnn      5204: INSTALL_UNSTRIPPED
                   5205: 
                   5206:     If set to yes, do not run strip(1) when installing binaries. Any debugging
                   5207:     sections and symbols present in binaries will be preserved.
                   5208: 
1.1       dsieger  5209: INSTALLATION_DIRS
                   5210: 
                   5211:     A list of directories relative to PREFIX that are created by pkgsrc at the
                   5212:     beginning of the install phase. The package is supposed to create all
                   5213:     needed directories itself before installing files to it and list all other
                   5214:     directories here.
                   5215: 
1.25      wiz      5216: In the rare cases that a package shouldn't install anything, set NO_INSTALL to 
1.1       dsieger  5217: "yes". This is mostly relevant for packages in the regress category.
                   5218: 
1.6       rillig   5219: 17.15. The package phase
1.1       dsieger  5220: 
                   5221: Once the install stage has completed, a binary package of the installed files
                   5222: can be built. These binary packages can be used for quick installation without
                   5223: previous compilation, e.g. by the make bin-install or by using pkg_add.
                   5224: 
                   5225: By default, the binary packages are created in ${PACKAGES}/All and symlinks are
                   5226: created in ${PACKAGES}/category, one for each category in the CATEGORIES
                   5227: variable. PACKAGES defaults to pkgsrc/packages.
                   5228: 
1.6       rillig   5229: 17.16. Cleaning up
1.1       dsieger  5230: 
                   5231: Once you're finished with a package, you can clean the work directory by
                   5232: running make clean. If you want to clean the work directories of all
                   5233: dependencies too, use make clean-depends.
                   5234: 
1.6       rillig   5235: 17.17. Other helpful targets
1.1       dsieger  5236: 
                   5237: pre/post-*
                   5238: 
                   5239:     For any of the main targets described in the previous section, two
                   5240:     auxiliary targets exist with "pre-" and "post-" used as a prefix for the
                   5241:     main target's name. These targets are invoked before and after the main
                   5242:     target is called, allowing extra configuration or installation steps be
                   5243:     performed from a package's Makefile, for example, which a program's
                   5244:     configure script or install target omitted.
                   5245: 
                   5246: do-*
                   5247: 
                   5248:     Should one of the main targets do the wrong thing, and should there be no
                   5249:     variable to fix this, you can redefine it with the do-* target. (Note that
                   5250:     redefining the target itself instead of the do-* target is a bad idea, as
                   5251:     the pre-* and post-* targets won't be called anymore, etc.) You will not
                   5252:     usually need to do this.
                   5253: 
                   5254: reinstall
                   5255: 
                   5256:     If you did a make install and you noticed some file was not installed
                   5257:     properly, you can repeat the installation with this target, which will
                   5258:     ignore the "already installed" flag.
                   5259: 
                   5260:     This is the default value of DEPENDS_TARGET except in the case of make
                   5261:     update and make package, where the defaults are "package" and "update",
                   5262:     respectively.
                   5263: 
                   5264: deinstall
                   5265: 
                   5266:     This target does a pkg_delete(1) in the current directory, effectively
                   5267:     de-installing the package. The following variables can be used to tune the
                   5268:     behaviour:
                   5269: 
                   5270:     PKG_VERBOSE
                   5271: 
                   5272:         Add a "-v" to the pkg_delete(1) command.
                   5273: 
                   5274:     DEINSTALLDEPENDS
                   5275: 
                   5276:         Remove all packages that require (depend on) the given package. This
                   5277:         can be used to remove any packages that may have been pulled in by a
                   5278:         given package, e.g. if make deinstall DEINSTALLDEPENDS=1 is done in
1.25      wiz      5279:         pkgsrc/x11/kde, this is likely to remove whole KDE. Works by adding "-R
                   5280:         " to the pkg_delete(1) command line.
1.1       dsieger  5281: 
                   5282: bin-install
                   5283: 
                   5284:     Install a binary package from local disk and via FTP from a list of sites
                   5285:     (see the BINPKG_SITES variable), and do a make package if no binary package
                   5286:     is available anywhere. The arguments given to pkg_add can be set via
                   5287:     BIN_INSTALL_FLAGS e.g., to do verbose operation, etc.
                   5288: 
1.95      wiz      5289: install-clean
                   5290: 
                   5291:     This target removes the state files for the "install" and later phases so
                   5292:     that the "install" target may be re-invoked. This can be used after editing
                   5293:     the PLIST to install the package without rebuilding it.
                   5294: 
                   5295: build-clean
                   5296: 
                   5297:     This target removes the state files for the "build" and later phases so
                   5298:     that the "build" target may be re-invoked.
                   5299: 
1.1       dsieger  5300: update
                   5301: 
                   5302:     This target causes the current package to be updated to the latest version.
                   5303:     The package and all depending packages first get de-installed, then current
                   5304:     versions of the corresponding packages get compiled and installed. This is
                   5305:     similar to manually noting which packages are currently installed, then
                   5306:     performing a series of make deinstall and make install (or whatever
                   5307:     UPDATE_TARGET is set to) for these packages.
                   5308: 
                   5309:     You can use the "update" target to resume package updating in case a
                   5310:     previous make update was interrupted for some reason. However, in this
                   5311:     case, make sure you don't call make clean or otherwise remove the list of
                   5312:     dependent packages in WRKDIR. Otherwise, you lose the ability to
                   5313:     automatically update the current package along with the dependent packages
                   5314:     you have installed.
                   5315: 
                   5316:     Resuming an interrupted make update will only work as long as the package
                   5317:     tree remains unchanged. If the source code for one of the packages to be
                   5318:     updated has been changed, resuming make update will most certainly fail!
                   5319: 
1.4       rillig   5320:     The following variables can be used either on the command line or in
1.1       dsieger  5321:     mk.conf to alter the behaviour of make update:
                   5322: 
                   5323:     UPDATE_TARGET
                   5324: 
                   5325:         Install target to recursively use for the updated package and the
                   5326:         dependent packages. Defaults to DEPENDS_TARGET if set, "install"
1.25      wiz      5327:         otherwise for make update. Other good targets are "package" or "
                   5328:         bin-install". Do not set this to "update" or you will get stuck in an
1.1       dsieger  5329:         endless loop!
                   5330: 
                   5331:     NOCLEAN
                   5332: 
                   5333:         Don't clean up after updating. Useful if you want to leave the work
                   5334:         sources of the updated packages around for inspection or other
1.25      wiz      5335:         purposes. Be sure you eventually clean up the source tree (see the "
                   5336:         clean-update" target below) or you may run into troubles with old
1.1       dsieger  5337:         source code still lying around on your next make or make update.
                   5338: 
                   5339:     REINSTALL
                   5340: 
                   5341:         Deinstall each package before installing (making DEPENDS_TARGET). This
                   5342:         may be necessary if the "clean-update" target (see below) was called
                   5343:         after interrupting a running make update.
                   5344: 
                   5345:     DEPENDS_TARGET
                   5346: 
                   5347:         Allows you to disable recursion and hardcode the target for packages.
                   5348:         The default is "update" for the update target, facilitating a recursive
                   5349:         update of prerequisite packages. Only set DEPENDS_TARGET if you want to
                   5350:         disable recursive updates. Use UPDATE_TARGET instead to just set a
                   5351:         specific target for each package to be installed during make update
                   5352:         (see above).
                   5353: 
                   5354: clean-update
                   5355: 
                   5356:     Clean the source tree for all packages that would get updated if make
                   5357:     update was called from the current directory. This target should not be
                   5358:     used if the current package (or any of its depending packages) have already
                   5359:     been de-installed (e.g., after calling make update) or you may lose some
1.25      wiz      5360:     packages you intended to update. As a rule of thumb: only use this target 
1.1       dsieger  5361:     before the first time you run make update and only if you have a dirty
                   5362:     package tree (e.g., if you used NOCLEAN).
                   5363: 
                   5364:     If you are unsure about whether your tree is clean, you can either perform
                   5365:     a make clean at the top of the tree, or use the following sequence of
                   5366:     commands from the directory of the package you want to update (before
                   5367:     running make update for the first time, otherwise you lose all the packages
                   5368:     you wanted to update!):
                   5369: 
                   5370:     # make clean-update
                   5371:     # make clean CLEANDEPENDS=YES
                   5372:     # make update
                   5373: 
                   5374: 
1.4       rillig   5375:     The following variables can be used either on the command line or in
1.1       dsieger  5376:     mk.conf to alter the behaviour of make clean-update:
                   5377: 
                   5378:     CLEAR_DIRLIST
                   5379: 
                   5380:         After make clean, do not reconstruct the list of directories to update
                   5381:         for this package. Only use this if make update successfully installed
                   5382:         all packages you wanted to update. Normally, this is done automatically
                   5383:         on make update, but may have been suppressed by the NOCLEAN variable
                   5384:         (see above).
                   5385: 
                   5386: replace
                   5387: 
                   5388:     Update the installation of the current package. This differs from update in
                   5389:     that it does not replace dependent packages. You will need to install
                   5390:     pkgtools/pkg_tarup for this target to work.
                   5391: 
                   5392:     Be careful when using this target! There are no guarantees that dependent
                   5393:     packages will still work, in particular they will most certainly break if
                   5394:     you make replace a library package whose shared library major version
                   5395:     changed between your installed version and the new one. For this reason,
                   5396:     this target is not officially supported and only recommended for advanced
                   5397:     users.
                   5398: 
                   5399: info
                   5400: 
                   5401:     This target invokes pkg_info(1) for the current package. You can use this
                   5402:     to check which version of a package is installed.
                   5403: 
                   5404: index
                   5405: 
                   5406:     This is a top-level command, i.e. it should be used in the pkgsrc
                   5407:     directory. It creates a database of all packages in the local pkgsrc tree,
                   5408:     including dependencies, comment, maintainer, and some other useful
                   5409:     information. Individual entries are created by running make describe in the
                   5410:     packages' directories. This index file is saved as pkgsrc/INDEX. It can be
                   5411:     displayed in verbose format by running make print-index. You can search in
                   5412:     it with make search key=something. You can extract a list of all packages
                   5413:     that depend on a particular one by running make show-deps PKG=somepackage.
                   5414: 
                   5415:     Running this command takes a very long time, some hours even on fast
                   5416:     machines!
                   5417: 
                   5418: readme
                   5419: 
                   5420:     This target generates a README.html file, which can be viewed using a
                   5421:     browser such as www/firefox or www/links. The generated files contain
                   5422:     references to any packages which are in the PACKAGES directory on the local
                   5423:     host. The generated files can be made to refer to URLs based on
                   5424:     FTP_PKG_URL_HOST and FTP_PKG_URL_DIR. For example, if I wanted to generate
                   5425:     README.html files which pointed to binary packages on the local machine, in
                   5426:     the directory /usr/packages, set FTP_PKG_URL_HOST=file://localhost and
                   5427:     FTP_PKG_URL_DIR=/usr/packages. The ${PACKAGES} directory and its
                   5428:     subdirectories will be searched for all the binary packages.
                   5429: 
                   5430:     The target can be run at the toplevel or in category directories, in which
                   5431:     case it descends recursively.
                   5432: 
                   5433: readme-all
                   5434: 
                   5435:     This is a top-level command, run it in pkgsrc. Use this target to create a
                   5436:     file README-all.html which contains a list of all packages currently
                   5437:     available in the NetBSD Packages Collection, together with the category
                   5438:     they belong to and a short description. This file is compiled from the
                   5439:     pkgsrc/*/README.html files, so be sure to run this after a make readme.
                   5440: 
                   5441: cdrom-readme
                   5442: 
                   5443:     This is very much the same as the "readme" target (see above), but is to be
                   5444:     used when generating a pkgsrc tree to be written to a CD-ROM. This target
                   5445:     also produces README.html files, and can be made to refer to URLs based on
                   5446:     CDROM_PKG_URL_HOST and CDROM_PKG_URL_DIR.
                   5447: 
                   5448: show-distfiles
                   5449: 
                   5450:     This target shows which distfiles and patchfiles are needed to build the
                   5451:     package (ALLFILES, which contains all DISTFILES and PATCHFILES, but not
                   5452:     patches/*).
                   5453: 
                   5454: show-downlevel
                   5455: 
                   5456:     This target shows nothing if the package is not installed. If a version of
                   5457:     this package is installed, but is not the version provided in this version
                   5458:     of pkgsrc, then a warning message is displayed. This target can be used to
                   5459:     show which of your installed packages are downlevel, and so the old
                   5460:     versions can be deleted, and the current ones added.
                   5461: 
                   5462: show-pkgsrc-dir
                   5463: 
                   5464:     This target shows the directory in the pkgsrc hierarchy from which the
                   5465:     package can be built and installed. This may not be the same directory as
                   5466:     the one from which the package was installed. This target is intended to be
                   5467:     used by people who may wish to upgrade many packages on a single host, and
1.25      wiz      5468:     can be invoked from the top-level pkgsrc Makefile by using the "
                   5469:     show-host-specific-pkgs" target.
1.1       dsieger  5470: 
                   5471: show-installed-depends
                   5472: 
                   5473:     This target shows which installed packages match the current package's
                   5474:     DEPENDS. Useful if out of date dependencies are causing build problems.
                   5475: 
1.95      wiz      5476: print-build-depends-list
                   5477: 
                   5478:     This target shows the list of packages that the current package depends on
                   5479:     for building.
                   5480: 
                   5481: print-run-depends-list
                   5482: 
                   5483:     This target shows the list of packages that the current package depends on
                   5484:     for running.
                   5485: 
1.1       dsieger  5486: check-shlibs
                   5487: 
                   5488:     After a package is installed, check all its binaries and (on ELF platforms)
                   5489:     shared libraries to see if they find the shared libs they need. Run by
1.4       rillig   5490:     default if PKG_DEVELOPER is set in mk.conf.
1.1       dsieger  5491: 
                   5492: print-PLIST
                   5493: 
                   5494:     After a "make install" from a new or upgraded pkg, this prints out an
                   5495:     attempt to generate a new PLIST from a find -newer work/.extract_done. An
                   5496:     attempt is made to care for shared libs etc., but it is strongly
                   5497:     recommended to review the result before putting it into PLIST. On upgrades,
                   5498:     it's useful to diff the output of this command against an already existing
                   5499:     PLIST file.
                   5500: 
                   5501:     If the package installs files via tar(1) or other methods that don't update
                   5502:     file access times, be sure to add these files manually to your PLIST, as
                   5503:     the "find -newer" command used by this target won't catch them!
                   5504: 
1.6       rillig   5505:     See Section 13.3, "Tweaking output of make print-PLIST" for more
1.1       dsieger  5506:     information on this target.
                   5507: 
                   5508: bulk-package
                   5509: 
                   5510:     Used to do bulk builds. If an appropriate binary package already exists, no
                   5511:     action is taken. If not, this target will compile, install and package it
1.66      asau     5512:     (and its depends, if PKG_DEPENDS is set properly. See Chapter 7, Creating
                   5513:     binary packages for everything in pkgsrc (bulk builds)). After creating the
                   5514:     binary package, the sources, the just-installed package and its required
                   5515:     packages are removed, preserving free disk space.
1.1       dsieger  5516: 
                   5517:     Beware that this target may deinstall all packages installed on a system!
                   5518: 
                   5519: bulk-install
                   5520: 
                   5521:     Used during bulk-installs to install required packages. If an up-to-date
1.25      wiz      5522:     binary package is available, it will be installed via pkg_add(1). If not, 
1.1       dsieger  5523:     make bulk-package will be executed, but the installed binary won't be
                   5524:     removed.
                   5525: 
                   5526:     A binary package is considered "up-to-date" to be installed via pkg_add(1)
                   5527:     if:
                   5528: 
1.42      asau     5529:       + None of the package's files (Makefile, ...) were modified since it was
1.1       dsieger  5530:         built.
                   5531: 
1.42      asau     5532:       + None of the package's required (binary) packages were modified since it
1.1       dsieger  5533:         was built.
                   5534: 
                   5535:     Beware that this target may deinstall all packages installed on a system!
                   5536: 
1.6       rillig   5537: Chapter 18. Tools needed for building or running
1.1       dsieger  5538: 
                   5539: Table of Contents
                   5540: 
1.6       rillig   5541: 18.1. Tools for pkgsrc builds
                   5542: 18.2. Tools needed by packages
                   5543: 18.3. Tools provided by platforms
1.1       dsieger  5544: 
                   5545: The USE_TOOLS definition is used both internally by pkgsrc and also for
                   5546: individual packages to define what commands are needed for building a package
                   5547: (like BUILD_DEPENDS) or for later run-time of an installed packaged (such as
                   5548: DEPENDS). If the native system provides an adequate tool, then in many cases, a
                   5549: pkgsrc package will not be used.
                   5550: 
                   5551: When building a package, the replacement tools are made available in a
                   5552: directory (as symlinks or wrapper scripts) that is early in the executable
                   5553: search path. Just like the buildlink system, this helps with consistent builds.
                   5554: 
                   5555: A tool may be needed to help build a specific package. For example, perl, GNU
                   5556: make (gmake) or yacc may be needed.
                   5557: 
                   5558: Also a tool may be needed, for example, because the native system's supplied
                   5559: tool may be inefficient for building a package with pkgsrc. For example, a
                   5560: package may need GNU awk, bison (instead of yacc) or a better sed.
                   5561: 
                   5562: The tools used by a package can be listed by running make show-tools.
                   5563: 
1.6       rillig   5564: 18.1. Tools for pkgsrc builds
1.1       dsieger  5565: 
                   5566: The default set of tools used by pkgsrc is defined in bsd.pkg.mk. This includes
                   5567: standard Unix tools, such as: cat, awk, chmod, test, and so on. These can be
                   5568: seen by running: make show-var VARNAME=USE_TOOLS.
                   5569: 
                   5570: If a package needs a specific program to build then the USE_TOOLS variable can
                   5571: be used to define the tools needed.
                   5572: 
1.6       rillig   5573: 18.2. Tools needed by packages
1.1       dsieger  5574: 
1.29      wiz      5575: In the following examples, the :run means that it is needed at run-time (and
                   5576: becomes a DEPENDS). The default is a build dependency which can be set with
                   5577: :build. (So in this example, it is the same as gmake:build and
                   5578: pkg-config:build.)
1.1       dsieger  5579: 
                   5580: USE_TOOLS+=     gmake perl:run pkg-config
                   5581: 
                   5582: When using the tools framework, a TOOLS_PATH.foo variable is defined which
                   5583: contains the full path to the appropriate tool. For example, TOOLS_PATH.bash
                   5584: could be "/bin/bash" on Linux systems.
                   5585: 
                   5586: If you always need a pkgsrc version of the tool at run-time, then just use
                   5587: DEPENDS instead.
                   5588: 
1.6       rillig   5589: 18.3. Tools provided by platforms
1.1       dsieger  5590: 
                   5591: When improving or porting pkgsrc to a new platform, have a look at (or create)
                   5592: the corresponding platform specific make file fragment under pkgsrc/mk/tools/
                   5593: tools.${OPSYS}.mk which defines the name of the common tools. For example:
                   5594: 
                   5595: .if exists(/usr/bin/bzcat)
                   5596: TOOLS_PLATFORM.bzcat?=          /usr/bin/bzcat
                   5597: .elif exists(/usr/bin/bzip2)
                   5598: TOOLS_PLATFORM.bzcat?=          /usr/bin/bzip2 -cd
                   5599: .endif
                   5600: 
                   5601: TOOLS_PLATFORM.true?=           true                    # shell builtin
                   5602: 
1.6       rillig   5603: Chapter 19. Making your package work
1.1       dsieger  5604: 
                   5605: Table of Contents
                   5606: 
1.6       rillig   5607: 19.1. General operation
1.1       dsieger  5608: 
1.108     rillig   5609:     19.1.1. How to pull in user-settable variables from mk.conf
                   5610:     19.1.2. User interaction
                   5611:     19.1.3. Handling licenses
                   5612:     19.1.4. Restricted packages
                   5613:     19.1.5. Handling dependencies
                   5614:     19.1.6. Handling conflicts with other packages
                   5615:     19.1.7. Packages that cannot or should not be built
                   5616:     19.1.8. Packages which should not be deleted, once installed
                   5617:     19.1.9. Handling packages with security problems
                   5618:     19.1.10. How to handle incrementing versions when fixing an existing
1.1       dsieger  5619:         package
1.108     rillig   5620:     19.1.11. Substituting variable text in the package files (the SUBST
1.1       dsieger  5621:         framework)
                   5622: 
1.108     rillig   5623: 19.2. The fetch phase
1.1       dsieger  5624: 
1.6       rillig   5625:     19.2.1. Packages whose distfiles aren't available for plain downloading
                   5626:     19.2.2. How to handle modified distfiles with the 'old' name
1.88      tnn      5627:     19.2.3. Packages hosted on github.com
1.1       dsieger  5628: 
1.108     rillig   5629: 19.3. The configure phase
1.1       dsieger  5630: 
1.6       rillig   5631:     19.3.1. Shared libraries - libtool
                   5632:     19.3.2. Using libtool on GNU packages that already support libtool
                   5633:     19.3.3. GNU Autoconf/Automake
                   5634: 
                   5635: 19.4. Programming languages
                   5636: 
                   5637:     19.4.1. C, C++, and Fortran
                   5638:     19.4.2. Java
                   5639:     19.4.3. Packages containing perl scripts
1.41      wiz      5640:     19.4.4. Packages containing shell scripts
                   5641:     19.4.5. Other programming languages
1.6       rillig   5642: 
1.108     rillig   5643: 19.5. The build phase
1.6       rillig   5644: 
                   5645:     19.5.1. Compiling C and C++ code conditionally
                   5646:     19.5.2. How to handle compiler bugs
1.24      wiz      5647:     19.5.3. Undefined reference to "..."
1.6       rillig   5648:     19.5.4. Running out of memory
                   5649: 
1.108     rillig   5650: 19.6. The install phase
1.6       rillig   5651: 
                   5652:     19.6.1. Creating needed directories
                   5653:     19.6.2. Where to install documentation
                   5654:     19.6.3. Installing highscore files
                   5655:     19.6.4. Adding DESTDIR support to packages
                   5656:     19.6.5. Packages with hardcoded paths to other interpreters
                   5657:     19.6.6. Packages installing perl modules
                   5658:     19.6.7. Packages installing info files
                   5659:     19.6.8. Packages installing man pages
1.7       rillig   5660:     19.6.9. Packages installing GConf data files
1.18      mishka   5661:     19.6.10. Packages installing scrollkeeper/rarian data files
1.6       rillig   5662:     19.6.11. Packages installing X11 fonts
                   5663:     19.6.12. Packages installing GTK2 modules
                   5664:     19.6.13. Packages installing SGML or XML data
                   5665:     19.6.14. Packages installing extensions to the MIME database
                   5666:     19.6.15. Packages using intltool
                   5667:     19.6.16. Packages installing startup scripts
                   5668:     19.6.17. Packages installing TeX modules
                   5669:     19.6.18. Packages supporting running binaries in emulation
                   5670:     19.6.19. Packages installing hicolor theme icons
                   5671:     19.6.20. Packages installing desktop files
1.1       dsieger  5672: 
1.6       rillig   5673: 19.7. Marking packages as having problems
1.1       dsieger  5674: 
1.6       rillig   5675: 19.1. General operation
1.1       dsieger  5676: 
                   5677: One appealing feature of pkgsrc is that it runs on many different platforms. As
                   5678: a result, it is important to ensure, where possible, that packages in pkgsrc
                   5679: are portable. This chapter mentions some particular details you should pay
                   5680: attention to while working on pkgsrc.
                   5681: 
1.108     rillig   5682: 19.1.1. How to pull in user-settable variables from mk.conf
1.1       dsieger  5683: 
                   5684: The pkgsrc user can configure pkgsrc by overriding several variables in the
1.4       rillig   5685: file pointed to by MAKECONF, which is mk.conf by default. When you want to use
                   5686: those variables in the preprocessor directives of make(1) (for example .if or
                   5687: .for), you need to include the file ../../mk/bsd.prefs.mk before, which in turn
                   5688: loads the user preferences.
1.1       dsieger  5689: 
                   5690: But note that some variables may not be completely defined after ../../mk/
                   5691: bsd.prefs.mk has been included, as they may contain references to variables
1.108     rillig   5692: that are not yet defined. In shell commands (the lines in Makefile that are
                   5693: indented with a tab) this is no problem, since variables are only expanded when
                   5694: they are used. But in the preprocessor directives mentioned above and in
                   5695: dependency lines (of the form target: dependencies) the variables are expanded
                   5696: at load time.
1.1       dsieger  5697: 
                   5698: Note
                   5699: 
1.108     rillig   5700: To check whether a variable can be used at load time, run pkglint -Wall on your
                   5701: package.
1.1       dsieger  5702: 
1.108     rillig   5703: 19.1.2. User interaction
1.1       dsieger  5704: 
                   5705: Occasionally, packages require interaction from the user, and this can be in a
                   5706: number of ways:
                   5707: 
                   5708:   * When fetching the distfiles, some packages require user interaction such as
                   5709:     entering username/password or accepting a license on a web page.
                   5710: 
                   5711:   * When extracting the distfiles, some packages may ask for passwords.
                   5712: 
                   5713:   * help to configure the package before it is built
                   5714: 
                   5715:   * help during the build process
                   5716: 
                   5717:   * help during the installation of a package
                   5718: 
1.108     rillig   5719: A package can set the INTERACTIVE_STAGE variable to define which stages need
                   5720: interaction. This should be done in the package's Makefile, e.g.:
1.1       dsieger  5721: 
                   5722: INTERACTIVE_STAGE=      configure install
                   5723: 
                   5724: The user can then decide to skip this package by setting the BATCH variable.
1.108     rillig   5725: Packages that require interaction are also excluded from bulk builds.
1.1       dsieger  5726: 
1.108     rillig   5727: 19.1.3. Handling licenses
1.1       dsieger  5728: 
                   5729: Authors of software can choose the licence under which software can be copied.
1.111     sevan    5730: The Free Software Foundation has declared some licenses "Free", and the Open
                   5731: Source Initiative has a definition of "Open Source".
                   5732: 
                   5733: By default, pkgsrc allows packages with Free or Open Source licenses to be
                   5734: built. To allow packages with other licenses to be built as well, the pkgsrc
                   5735: user needs to add these licenses to the ACCEPTABLE_LICENSES variable in mk.conf
                   5736: . Note that this variable only affects which packages may be built, while the
                   5737: license terms often also restrict the actual use of the package and its
                   5738: redistribution.
1.1       dsieger  5739: 
                   5740: One might want to only install packages with a BSD license, or the GPL, and not
1.20      jnemeth  5741: the other. The free licenses are added to the default ACCEPTABLE_LICENSES
1.111     sevan    5742: variable. The pkgsrc user can override the default by setting the
                   5743: ACCEPTABLE_LICENSES variable with "=" instead of "+=". The licenses accepted by
                   5744: default are defined in the DEFAULT_ACCEPTABLE_LICENSES variable in the file
                   5745: pkgsrc/mk/license.mk.
1.1       dsieger  5746: 
                   5747: The license tag mechanism is intended to address copyright-related issues
                   5748: surrounding building, installing and using a package, and not to address
1.20      jnemeth  5749: redistribution issues (see RESTRICTED and NO_SRC_ON_FTP, etc.). Packages with
                   5750: redistribution restrictions should set these tags.
1.1       dsieger  5751: 
                   5752: Denoting that a package may be copied according to a particular license is done
                   5753: by placing the license in pkgsrc/licenses and setting the LICENSE variable to a
                   5754: string identifying the license, e.g. in graphics/xv:
                   5755: 
                   5756: LICENSE=        xv-license
                   5757: 
                   5758: When trying to build, the user will get a notice that the package is covered by
                   5759: a license which has not been placed in the ACCEPTABLE_LICENSES variable:
                   5760: 
                   5761: % make
                   5762: ===> xv-3.10anb9 has an unacceptable license: xv-license.
                   5763: ===>     To view the license, enter "/usr/bin/make show-license".
                   5764: ===>     To indicate acceptance, add this line to your /etc/mk.conf:
                   5765: ===>     ACCEPTABLE_LICENSES+=xv-license
                   5766: *** Error code 1
                   5767: 
                   5768: The license can be viewed with make show-license, and if the user so chooses,
1.4       rillig   5769: the line printed above can be added to mk.conf to convey to pkgsrc that it
1.1       dsieger  5770: should not in the future fail because of that license:
                   5771: 
                   5772: ACCEPTABLE_LICENSES+=xv-license
                   5773: 
1.111     sevan    5774: The use of LICENSE=shareware, LICENSE=no-commercial-use, and similar language
                   5775: is deprecated because it does not crisply refer to a particular license text.
                   5776: Another problem with such usage is that it does not enable a user to tell
                   5777: pkgsrc to proceed for a single package without also telling pkgsrc to proceed
                   5778: for all packages with that tag.
                   5779: 
                   5780: 19.1.3.1. Adding a package with a new license
1.1       dsieger  5781: 
1.49      rodent   5782: When adding a package with a new license, the following steps are required:
                   5783: 
1.111     sevan    5784:  1. Check whether the license qualifies as Free or Open Source by referencing
                   5785:     Various Licenses and Comments about Them and Licenses by Name | Open Source
                   5786:     Initiative. If this is the case, the filename in pkgsrc/licenses/ does not
                   5787:     need the -license suffix, and the license name should be added to:
1.49      rodent   5788: 
                   5789:       + DEFAULT_ACCEPTABLE_LICENSES in pkgsrc/mk/license.mk
                   5790: 
                   5791:       + default_acceptable_licenses in pkgsrc/pkgtools/pkg_install/files/lib/
                   5792:         license.c
                   5793: 
                   5794:  2. The license text should be added to pkgsrc/licenses for displaying. A list
                   5795:     of known licenses can be seen in this directory.
1.1       dsieger  5796: 
1.111     sevan    5797: 19.1.3.2. Change to the license
1.1       dsieger  5798: 
1.111     sevan    5799: When the license changes (in a way other than formatting), make sure that the
                   5800: new license has a different name (e.g., append the version number if it exists,
                   5801: or the date). Just because a user told pkgsrc to build programs under a
                   5802: previous version of a license does not mean that pkgsrc should build programs
                   5803: under the new licenses. The higher-level point is that pkgsrc does not evaluate
                   5804: licenses for reasonableness; the only test is a mechanistic test of whether a
                   5805: particular text has been approved by either of two bodies (FSF or OSI).
1.1       dsieger  5806: 
1.108     rillig   5807: 19.1.4. Restricted packages
1.1       dsieger  5808: 
1.111     sevan    5809: Some licenses restrict how software may be re-distributed. By declaring the
                   5810: restrictions, package tools can automatically refrain from e.g. placing binary
                   5811: packages on FTP sites.
                   5812: 
                   5813: There are four possible restrictions, which are the cross product of sources
                   5814: (distfiles) and binaries not being placed on FTP sites and CD-ROMs. Because
                   5815: this is rarely the exact language in any license, and because non-Free licenses
                   5816: tend to be different from each other, pkgsrc adopts a definition of FTP and
                   5817: CD-ROM. "FTP" means making the source or binary file available over the
                   5818: Internet at no charge. "CD-ROM" means making the source or binary available on
                   5819: some kind of media, together with other source and binary packages, which is
                   5820: sold for a distribution charge.
1.1       dsieger  5821: 
                   5822: In order to encode these restrictions, the package system defines five make
                   5823: variables that can be set to note these restrictions:
                   5824: 
                   5825:   * RESTRICTED
                   5826: 
                   5827:     This variable should be set whenever a restriction exists (regardless of
                   5828:     its kind). Set this variable to a string containing the reason for the
                   5829:     restriction. It should be understood that those wanting to understand the
                   5830:     restriction will have to read the license, and perhaps seek advice of
                   5831:     counsel.
                   5832: 
                   5833:   * NO_BIN_ON_CDROM
                   5834: 
                   5835:     Binaries may not be placed on CD-ROM containing other binary packages, for
                   5836:     which a distribution charge may be made. In this case, set this variable to
                   5837:     ${RESTRICTED}.
                   5838: 
                   5839:   * NO_BIN_ON_FTP
                   5840: 
                   5841:     Binaries may not made available on the Internet without charge. In this
                   5842:     case, set this variable to ${RESTRICTED}. If this variable is set, binary
                   5843:     packages will not be included on ftp.NetBSD.org.
                   5844: 
                   5845:   * NO_SRC_ON_CDROM
                   5846: 
                   5847:     Distfiles may not be placed on CD-ROM, together with other distfiles, for
                   5848:     which a fee may be charged. In this case, set this variable to $
                   5849:     {RESTRICTED}.
                   5850: 
                   5851:   * NO_SRC_ON_FTP
                   5852: 
                   5853:     Distfiles may not made available via FTP at no charge. In this case, set
                   5854:     this variable to ${RESTRICTED}. If this variable is set, the distfile(s)
                   5855:     will not be mirrored on ftp.NetBSD.org.
                   5856: 
1.111     sevan    5857: Please note that packages will be removed from pkgsrc when the distfiles are
1.33      wiz      5858: not distributable and cannot be obtained for a period of one full quarter
1.111     sevan    5859: branch. Packages with manual/interactive fetch must have a maintainer and it is
                   5860: his/her responsibility to ensure this.
1.33      wiz      5861: 
1.108     rillig   5862: 19.1.5. Handling dependencies
1.1       dsieger  5863: 
                   5864: Your package may depend on some other package being present - and there are
                   5865: various ways of expressing this dependency. pkgsrc supports the BUILD_DEPENDS
                   5866: and DEPENDS definitions, the USE_TOOLS definition, as well as dependencies via
                   5867: buildlink3.mk, which is the preferred way to handle dependencies, and which
1.6       rillig   5868: uses the variables named above. See Chapter 14, Buildlink methodology for more
1.1       dsieger  5869: information.
                   5870: 
                   5871: The basic difference between the two variables is as follows: The DEPENDS
                   5872: definition registers that pre-requisite in the binary package so it will be
                   5873: pulled in when the binary package is later installed, whilst the BUILD_DEPENDS
                   5874: definition does not, marking a dependency that is only needed for building the
                   5875: package.
                   5876: 
                   5877: This means that if you only need a package present whilst you are building, it
                   5878: should be noted as a BUILD_DEPENDS.
                   5879: 
                   5880: The format for a BUILD_DEPENDS and a DEPENDS definition is:
                   5881: 
                   5882: <pre-req-package-name>:../../<category>/<pre-req-package>
                   5883: 
                   5884: Please note that the "pre-req-package-name" may include any of the wildcard
                   5885: version numbers recognized by pkg_info(1).
                   5886: 
1.55      wiz      5887:  1. If your package needs another package's binaries or libraries to build and
1.1       dsieger  5888:     run, and if that package has a buildlink3.mk file available, use it:
                   5889: 
                   5890:     .include "../../graphics/jpeg/buildlink3.mk"
                   5891: 
1.55      wiz      5892:  2. If your package needs another package's binaries or libraries only for
                   5893:     building, and if that package has a buildlink3.mk file available, use it:
                   5894: 
                   5895:     .include "../../graphics/jpeg/buildlink3.mk"
                   5896: 
                   5897:     but set BUILDLINK_DEPMETHOD.jpeg?=build to make it a build dependency only.
                   5898:     This case is rather rare.
                   5899: 
                   5900:  3. If your package needs binaries from another package to build, use the
1.26      spz      5901:     BUILD_DEPENDS definition:
1.1       dsieger  5902: 
1.26      spz      5903:     BUILD_DEPENDS+= scons-[0-9]*:../../devel/scons
1.1       dsieger  5904: 
1.55      wiz      5905:  4. If your package needs a library with which to link and there is no
1.26      spz      5906:     buildlink3.mk file available, create one. Using DEPENDS won't be sufficient
                   5907:     because the include files and libraries will be hidden from the compiler.
1.1       dsieger  5908: 
1.55      wiz      5909:  5. If your package needs some executable to be able to run correctly and if
1.26      spz      5910:     there's no buildlink3.mk file, this is specified using the DEPENDS
                   5911:     variable. The print/lyx package needs to be able to execute the latex
1.129   ! wiz      5912:     binary from the tex-latex-bin package when it runs, and that is specified:
1.1       dsieger  5913: 
1.129   ! wiz      5914:     DEPENDS+=        tex-latex-bin-[0-9]*:../../print/tex-latex-bin
1.1       dsieger  5915: 
1.55      wiz      5916:  6. You can use wildcards in package dependencies. Note that such wildcard
1.26      spz      5917:     dependencies are retained when creating binary packages. The dependency is
                   5918:     checked when installing the binary package and any package which matches
                   5919:     the pattern will be used. Wildcard dependencies should be used with care.
1.1       dsieger  5920: 
                   5921:     The "-[0-9]*" should be used instead of "-*" to avoid potentially ambiguous
                   5922:     matches such as "tk-postgresql" matching a "tk-*" DEPENDS.
                   5923: 
                   5924:     Wildcards can also be used to specify that a package will only build
                   5925:     against a certain minimum version of a pre-requisite:
                   5926: 
1.26      spz      5927:     DEPENDS+=       ImageMagick>=6.0:../../graphics/ImageMagick
1.1       dsieger  5928: 
1.26      spz      5929:     This means that the package will build using version 6.0 of ImageMagick or
                   5930:     newer. Such a dependency may be warranted if, for example, the command line
                   5931:     options of an executable have changed.
                   5932: 
                   5933:     If you need to depend on minimum versions of libraries, see the buildlink
                   5934:     section of the pkgsrc guide.
1.1       dsieger  5935: 
                   5936:     For security fixes, please update the package vulnerabilities file. See
1.108     rillig   5937:     Section 19.1.9, "Handling packages with security problems" for more
1.1       dsieger  5938:     information.
                   5939: 
                   5940: If your package needs files from another package to build, add the relevant
                   5941: distribution files to DISTFILES, so they will be extracted automatically. See
                   5942: the print/ghostscript package for an example. (It relies on the jpeg sources
                   5943: being present in source form during the build.)
                   5944: 
1.108     rillig   5945: 19.1.6. Handling conflicts with other packages
1.1       dsieger  5946: 
                   5947: Your package may conflict with other packages a user might already have
                   5948: installed on his system, e.g. if your package installs the same set of files as
1.80      wiz      5949: another package in the pkgsrc tree or has the same PKGNAME.
1.1       dsieger  5950: 
1.80      wiz      5951: These cases are handled automatically by the packaging tools at package
                   5952: installation time and do not need to be handled manually.
1.1       dsieger  5953: 
1.80      wiz      5954: In case the conflicts can not be recognized automatically (e.g., packages using
                   5955: the same config file location but no other shared files), you can set CONFLICTS
                   5956: to a space-separated list of packages (including version string) your package
                   5957: conflicts with.
1.1       dsieger  5958: 
1.80      wiz      5959: For example, if both foo/bar and foo/baz use the same config file, you would
                   5960: set in foo/bar/Makefile:
1.1       dsieger  5961: 
1.80      wiz      5962: CONFLICTS=      baz-[0-9]*
1.1       dsieger  5963: 
1.80      wiz      5964: and in pkgsrc/foo/baz/Makefile:
1.1       dsieger  5965: 
1.80      wiz      5966: CONFLICTS=      bar-[0-9]*
1.1       dsieger  5967: 
1.108     rillig   5968: 19.1.7. Packages that cannot or should not be built
1.1       dsieger  5969: 
                   5970: There are several reasons why a package might be instructed to not build under
                   5971: certain circumstances. If the package builds and runs on most platforms, the
1.83      dholland 5972: exceptions should be noted with BROKEN_ON_PLATFORM. If the package builds and
                   5973: runs on a small handful of platforms, set BROKEN_EXCEPT_ON_PLATFORM instead.
                   5974: Both BROKEN_ON_PLATFORM and BROKEN_EXCEPT_ON_PLATFORM are OS triples
                   5975: (OS-version-platform) that can use glob-style wildcards.
                   5976: 
1.114     maya     5977: If a package is not appropriate for some platforms (as opposed to merely
1.83      dholland 5978: broken), a different set of variables should be used as this affects failure
                   5979: reporting and statistics. If the package is appropriate for most platforms, the
                   5980: exceptions should be noted with NOT_FOR_PLATFORM. If the package is appropriate
                   5981: for only a small handful of platforms (often exactly one), set
                   5982: ONLY_FOR_PLATFORM instead. Both ONLY_FOR_PLATFORM and NOT_FOR_PLATFORM are OS
                   5983: triples (OS-version-platform) that can use glob-style wildcards.
1.1       dsieger  5984: 
                   5985: Some packages are tightly bound to a specific version of an operating system,
                   5986: e.g. LKMs or sysutils/lsof. Such binary packages are not backwards compatible
                   5987: with other versions of the OS, and should be uploaded to a version specific
                   5988: directory on the FTP server. Mark these packages by setting OSVERSION_SPECIFIC
                   5989: to "yes". This variable is not currently used by any of the package system
                   5990: internals, but may be used in the future.
                   5991: 
                   5992: If the package should be skipped (for example, because it provides
                   5993: functionality already provided by the system), set PKG_SKIP_REASON to a
                   5994: descriptive message. If the package should fail because some preconditions are
                   5995: not met, set PKG_FAIL_REASON to a descriptive message.
                   5996: 
1.108     rillig   5997: 19.1.8. Packages which should not be deleted, once installed
1.1       dsieger  5998: 
                   5999: To ensure that a package may not be deleted, once it has been installed, the
                   6000: PKG_PRESERVE definition should be set in the package Makefile. This will be
1.25      wiz      6001: carried into any binary package that is made from this pkgsrc entry. A "
                   6002: preserved" package will not be deleted using pkg_delete(1) unless the "-f"
1.1       dsieger  6003: option is used.
                   6004: 
1.108     rillig   6005: 19.1.9. Handling packages with security problems
1.1       dsieger  6006: 
                   6007: When a vulnerability is found, this should be noted in localsrc/security/
1.32      wiz      6008: advisories/pkg-vulnerabilities, and after committing that file, ask
                   6009: pkgsrc-security@NetBSD.org to update the file on ftp.NetBSD.org.
1.1       dsieger  6010: 
                   6011: After fixing the vulnerability by a patch, its PKGREVISION should be increased
                   6012: (this is of course not necessary if the problem is fixed by using a newer
1.32      wiz      6013: release of the software), and the pattern in the pkg-vulnerabilities file must
                   6014: be updated.
1.1       dsieger  6015: 
                   6016: Also, if the fix should be applied to the stable pkgsrc branch, be sure to
                   6017: submit a pullup request!
                   6018: 
                   6019: Binary packages already on ftp.NetBSD.org will be handled semi-automatically by
                   6020: a weekly cron job.
                   6021: 
1.108     rillig   6022: 19.1.10. How to handle incrementing versions when fixing an existing package
1.1       dsieger  6023: 
                   6024: When making fixes to an existing package it can be useful to change the version
                   6025: number in PKGNAME. To avoid conflicting with future versions by the original
                   6026: author, a "nb1", "nb2", ... suffix can be used on package versions by setting
                   6027: PKGREVISION=1 (2, ...). The "nb" is treated like a "." by the package tools.
                   6028: e.g.
                   6029: 
                   6030: DISTNAME=       foo-17.42
                   6031: PKGREVISION=    9
                   6032: 
                   6033: will result in a PKGNAME of "foo-17.42nb9". If you want to use the original
                   6034: value of PKGNAME without the "nbX" suffix, e.g. for setting DIST_SUBDIR, use
                   6035: PKGNAME_NOREV.
                   6036: 
                   6037: When a new release of the package is released, the PKGREVISION should be
                   6038: removed, e.g. on a new minor release of the above package, things should be
                   6039: like:
                   6040: 
                   6041: DISTNAME=       foo-17.43
                   6042: 
                   6043: PKGREVISION should be incremented for any non-trivial change in the resulting
                   6044: binary package. Without a PKGREVISION bump, someone with the previous version
                   6045: installed has no way of knowing that their package is out of date. Thus,
                   6046: changes without increasing PKGREVISION are essentially labeled "this is so
                   6047: trivial that no reasonable person would want to upgrade", and this is the rough
                   6048: test for when increasing PKGREVISION is appropriate. Examples of changes that
                   6049: do not merit increasing PKGREVISION are:
                   6050: 
1.14      jmcneill 6051:   * Changing HOMEPAGE, MAINTAINER, OWNER, or comments in Makefile.
1.1       dsieger  6052: 
                   6053:   * Changing build variables if the resulting binary package is the same.
                   6054: 
                   6055:   * Changing DESCR.
                   6056: 
                   6057:   * Adding PKG_OPTIONS if the default options don't change.
                   6058: 
                   6059: Examples of changes that do merit an increase to PKGREVISION include:
                   6060: 
                   6061:   * Security fixes
                   6062: 
                   6063:   * Changes or additions to a patch file
                   6064: 
                   6065:   * Changes to the PLIST
                   6066: 
1.12      weinem   6067:   * A dependency is changed or renamed.
                   6068: 
1.1       dsieger  6069: PKGREVISION must also be incremented when dependencies have ABI changes.
                   6070: 
1.108     rillig   6071: 19.1.11. Substituting variable text in the package files (the SUBST framework)
1.1       dsieger  6072: 
                   6073: When you want to replace the same text in multiple files or when the
                   6074: replacement text varies, patches alone cannot help. This is where the SUBST
                   6075: framework comes in. It provides an easy-to-use interface for replacing text in
                   6076: files. Example:
                   6077: 
                   6078: SUBST_CLASSES+=                 fix-paths
                   6079: SUBST_STAGE.fix-paths=          pre-configure
                   6080: SUBST_MESSAGE.fix-paths=        Fixing absolute paths.
                   6081: SUBST_FILES.fix-paths=          src/*.c
                   6082: SUBST_FILES.fix-paths+=         scripts/*.sh
                   6083: SUBST_SED.fix-paths=            -e 's,"/usr/local,"${PREFIX},g'
                   6084: SUBST_SED.fix-paths+=           -e 's,"/var/log,"${VARBASE}/log,g'
                   6085: 
                   6086: SUBST_CLASSES is a list of identifiers that are used to identify the different
                   6087: SUBST blocks that are defined. The SUBST framework is heavily used by pkgsrc,
                   6088: so it is important to always use the += operator with this variable. Otherwise
                   6089: some substitutions may be skipped.
                   6090: 
                   6091: The remaining variables of each SUBST block are parameterized with the
                   6092: identifier from the first line (fix-paths in this case.) They can be seen as
                   6093: parameters to a function call.
                   6094: 
                   6095: SUBST_STAGE.* specifies the stage at which the replacement will take place. All
                   6096: combinations of pre-, do- and post- together with a phase name are possible,
                   6097: though only few are actually used. Most commonly used are post-patch and
                   6098: pre-configure. Of these two, pre-configure should be preferred because then it
                   6099: is possible to run bmake patch and have the state after applying the patches
                   6100: but before making any other changes. This is especially useful when you are
                   6101: debugging a package in order to create new patches for it. Similarly,
                   6102: post-build is preferred over pre-install, because the install phase should
                   6103: generally be kept as simple as possible. When you use post-build, you have the
                   6104: same files in the working directory that will be installed later, so you can
                   6105: check if the substitution has succeeded.
                   6106: 
                   6107: SUBST_MESSAGE.* is an optional text that is printed just before the
                   6108: substitution is done.
                   6109: 
                   6110: SUBST_FILES.* is the list of shell globbing patterns that specifies the files
                   6111: in which the substitution will take place. The patterns are interpreted
                   6112: relatively to the WRKSRC directory.
                   6113: 
                   6114: SUBST_SED.* is a list of arguments to sed(1) that specify the actual
                   6115: substitution. Every sed command should be prefixed with -e, so that all SUBST
                   6116: blocks look uniform.
                   6117: 
                   6118: There are some more variables, but they are so seldomly used that they are only
                   6119: documented in the mk/subst.mk file.
                   6120: 
1.108     rillig   6121: 19.2. The fetch phase
1.1       dsieger  6122: 
1.6       rillig   6123: 19.2.1. Packages whose distfiles aren't available for plain downloading
1.1       dsieger  6124: 
                   6125: If you need to download from a dynamic URL you can set DYNAMIC_MASTER_SITES and
                   6126: a make fetch will call files/getsite.sh with the name of each file to download
                   6127: as an argument, expecting it to output the URL of the directory from which to
                   6128: download it. graphics/ns-cult3d is an example of this usage.
                   6129: 
                   6130: If the download can't be automated, because the user must submit personal
                   6131: information to apply for a password, or must pay for the source, or whatever,
                   6132: you can set FETCH_MESSAGE to a list of lines that are displayed to the user
                   6133: before aborting the build. Example:
                   6134: 
                   6135: FETCH_MESSAGE=  "Please download the files"
                   6136: FETCH_MESSAGE+= "    "${DISTFILES:Q}
                   6137: FETCH_MESSAGE+= "manually from "${MASTER_SITES:Q}"."
                   6138: 
1.6       rillig   6139: 19.2.2. How to handle modified distfiles with the 'old' name
1.1       dsieger  6140: 
                   6141: Sometimes authors of a software package make some modifications after the
                   6142: software was released, and they put up a new distfile without changing the
                   6143: package's version number. If a package is already in pkgsrc at that time, the
                   6144: checksum will no longer match. The contents of the new distfile should be
                   6145: compared against the old one before changing anything, to make sure the
                   6146: distfile was really updated on purpose, and that no trojan horse or so crept
                   6147: in. Please mention that the distfiles were compared and what was found in your
1.54      rodent   6148: commit message.
                   6149: 
                   6150: Then, the correct way to work around this is to set DIST_SUBDIR to a unique
1.109     wiz      6151: directory name, usually based on PKGNAME_NOREV (but take care with python or
                   6152: ruby packages, where PKGNAME includes a variable prefix). All DISTFILES and
                   6153: PATCHFILES for this package will be put in that subdirectory of the local
                   6154: distfiles directory. (See Section 19.1.10, "How to handle incrementing versions
                   6155: when fixing an existing package" for more details.) In case this happens more
                   6156: often, PKGNAME can be used (thus including the nbX suffix) or a date stamp can
                   6157: be appended, like ${PKGNAME_NOREV}-YYYYMMDD.
1.54      rodent   6158: 
                   6159: DIST_SUBDIR is also used when a distfile's name does not contain a version and
                   6160: the distfile is apt to change. In cases where the likelihood of this is very
                   6161: small, DIST_SUBDIR might not be required. Additionally, DIST_SUBDIR must not be
                   6162: removed unless the distfile name changes, even if a package is being moved or
                   6163: renamed.
                   6164: 
                   6165: Do not forget regenerating the distinfo file after that, since it contains the
                   6166: DIST_SUBDIR path in the filenames. Also, increase the PKGREVISION if the
                   6167: installed package is different. Furthermore, a mail to the package's authors
                   6168: seems appropriate telling them that changing distfiles after releases without
                   6169: changing the file names is not good practice.
1.1       dsieger  6170: 
1.88      tnn      6171: 19.2.3. Packages hosted on github.com
                   6172: 
1.90      tnn      6173: Helper methods exist for packages hosted on github.com which will often have
                   6174: distfile names that clash with other packages, for example 1.0.tar.gz. Use one
                   6175: of the three recipes from below:
1.88      tnn      6176: 
                   6177: 19.2.3.1. Fetch based on a tagged release
                   6178: 
                   6179: If your distfile URL looks similar to http://github.com/username/exampleproject
                   6180: /archive/v1.0.zip, then you are packaging a tagged release.
                   6181: 
                   6182: DISTNAME=       exampleproject-1.0
1.90      tnn      6183: MASTER_SITES=   ${MASTER_SITE_GITHUB:=username/}
                   6184: #GITHUB_PROJECT=        # can be omitted if same as DISTNAME
                   6185: GITHUB_TAG=     v${PKGVERSION_NOREV}
1.88      tnn      6186: EXTRACT_SUFX=   .zip
                   6187: 
                   6188: 19.2.3.2. Fetch based on a specific commit
                   6189: 
                   6190: If your distfile URL looks similar to http://github.com/example/example/archive
                   6191: /988881adc9fc3655077dc2d4d757d480b5ea0e11.tar.gz, then you are packaging a
                   6192: specific commit not tied to a release.
                   6193: 
                   6194: DISTNAME=       example-1.0
1.107     jnemeth  6195: MASTER_SITES=   ${MASTER_SITE_GITHUB:=example/}
1.90      tnn      6196: #GITHUB_PROJECT=        # can be omitted if same as DISTNAME
                   6197: GITHUB_TAG=     988881adc9fc3655077dc2d4d757d480b5ea0e11
1.88      tnn      6198: 
                   6199: 19.2.3.3. Fetch based on release
                   6200: 
                   6201: If your distfile URL looks similar to http://github.com/username/exampleproject
                   6202: /releases/download/rel-1.6/offensive-1.6.zip, then you are packaging a release.
                   6203: 
1.90      tnn      6204: DISTNAME=       offensive-1.6
1.88      tnn      6205: PKGNAME=        ${DISTNAME:S/offensive/proper/}
1.90      tnn      6206: MASTER_SITES=   ${MASTER_SITE_GITHUB:=username/}
                   6207: GITHUB_PROJECT= exampleproject
                   6208: GITHUB_RELEASE= rel-${PKGVERSION_NOREV} # usually just set this to ${DISTNAME}
                   6209: EXTRACT_SUFX=   .zip
1.88      tnn      6210: 
1.108     rillig   6211: 19.3. The configure phase
1.1       dsieger  6212: 
1.6       rillig   6213: 19.3.1. Shared libraries - libtool
1.1       dsieger  6214: 
                   6215: pkgsrc supports many different machines, with different object formats like
                   6216: a.out and ELF, and varying abilities to do shared library and dynamic loading
                   6217: at all. To accompany this, varying commands and options have to be passed to
                   6218: the compiler, linker, etc. to get the Right Thing, which can be pretty annoying
                   6219: especially if you don't have all the machines at your hand to test things. The
                   6220: devel/libtool pkg can help here, as it just "knows" how to build both static
                   6221: and dynamic libraries from a set of source files, thus being
                   6222: platform-independent.
                   6223: 
                   6224: Here's how to use libtool in a package in seven simple steps:
                   6225: 
                   6226:  1. Add USE_LIBTOOL=yes to the package Makefile.
                   6227: 
                   6228:  2. For library objects, use "${LIBTOOL} --mode=compile ${CC}" in place of "$
                   6229:     {CC}". You could even add it to the definition of CC, if only libraries are
                   6230:     being built in a given Makefile. This one command will build both PIC and
                   6231:     non-PIC library objects, so you need not have separate shared and
                   6232:     non-shared library rules.
                   6233: 
                   6234:  3. For the linking of the library, remove any "ar", "ranlib", and "ld
                   6235:     -Bshareable" commands, and instead use:
                   6236: 
                   6237:     ${LIBTOOL} --mode=link \
                   6238:         ${CC} -o ${.TARGET:.a=.la} \
                   6239:             ${OBJS:.o=.lo} \
                   6240:             -rpath ${PREFIX}/lib \
                   6241:             -version-info major:minor
                   6242: 
                   6243:     Note that the library is changed to have a .la extension, and the objects
                   6244:     are changed to have a .lo extension. Change OBJS as necessary. This
                   6245:     automatically creates all of the .a, .so.major.minor, and ELF symlinks (if
                   6246:     necessary) in the build directory. Be sure to include "-version-info",
                   6247:     especially when major and minor are zero, as libtool will otherwise strip
                   6248:     off the shared library version.
                   6249: 
                   6250:     From the libtool manual:
                   6251: 
                   6252:     So, libtool library versions are described by three integers:
                   6253: 
                   6254:     CURRENT
                   6255:     The most recent interface number that this library implements.
                   6256: 
                   6257:     REVISION
                   6258:     The implementation number of the CURRENT interface.
                   6259: 
                   6260:     AGE
                   6261:     The difference between the newest and oldest interfaces that
                   6262:     this library implements.  In other words, the library implements
                   6263:     all the interface numbers in the range from number `CURRENT -
                   6264:     AGE' to `CURRENT'.
                   6265: 
                   6266:     If two libraries have identical CURRENT and AGE numbers, then the
                   6267:     dynamic linker chooses the library with the greater REVISION number.
                   6268: 
                   6269:     The "-release" option will produce different results for a.out and ELF
1.25      wiz      6270:     (excluding symlinks) in only one case. An ELF library of the form "
                   6271:     libfoo-release.so.x.y" will have a symlink of "libfoo.so.x.y" on an a.out
1.1       dsieger  6272:     platform. This is handled automatically.
                   6273: 
                   6274:     The "-rpath argument" is the install directory of the library being built.
                   6275: 
                   6276:     In the PLIST, include only the .la file, the other files will be added
                   6277:     automatically.
                   6278: 
                   6279:  4. When linking shared object (.so) files, i.e. files that are loaded via
                   6280:     dlopen(3), NOT shared libraries, use "-module -avoid-version" to prevent
                   6281:     them getting version tacked on.
                   6282: 
                   6283:     The PLIST file gets the foo.so entry.
                   6284: 
                   6285:  5. When linking programs that depend on these libraries before they are
                   6286:     installed, preface the cc(1) or ld(1) line with "${LIBTOOL} --mode=link",
                   6287:     and it will find the correct libraries (static or shared), but please be
                   6288:     aware that libtool will not allow you to specify a relative path in -L
                   6289:     (such as "-L../somelib"), because it expects you to change that argument to
                   6290:     be the .la file. e.g.
                   6291: 
                   6292:     ${LIBTOOL} --mode=link ${CC} -o someprog -L../somelib -lsomelib
                   6293: 
                   6294:     should be changed to:
                   6295: 
                   6296:     ${LIBTOOL} --mode=link ${CC} -o someprog ../somelib/somelib.la
                   6297: 
                   6298:     and it will do the right thing with the libraries.
                   6299: 
                   6300:  6. When installing libraries, preface the install(1) or cp(1) command with "$
                   6301:     {LIBTOOL} --mode=install", and change the library name to .la. e.g.
                   6302: 
1.23      jakllsch 6303:     ${LIBTOOL} --mode=install ${BSD_INSTALL_LIB} ${SOMELIB:.a=.la} ${PREFIX}/lib
1.1       dsieger  6304: 
                   6305:     This will install the static .a, shared library, any needed symlinks, and
                   6306:     run ldconfig(8).
                   6307: 
                   6308:  7. In your PLIST, include only the .la file (this is a change from previous
                   6309:     behaviour).
                   6310: 
1.6       rillig   6311: 19.3.2. Using libtool on GNU packages that already support libtool
1.1       dsieger  6312: 
                   6313: Add USE_LIBTOOL=yes to the package Makefile. This will override the package's
                   6314: own libtool in most cases. For older libtool using packages, libtool is made by
                   6315: ltconfig script during the do-configure step; you can check the libtool script
                   6316: location by doing make configure; find work*/ -name libtool.
                   6317: 
                   6318: LIBTOOL_OVERRIDE specifies which libtool scripts, relative to WRKSRC, to
                   6319: override. By default, it is set to "libtool */libtool */*/libtool". If this
                   6320: does not match the location of the package's libtool script(s), set it as
                   6321: appropriate.
                   6322: 
                   6323: If you do not need *.a static libraries built and installed, then use
                   6324: SHLIBTOOL_OVERRIDE instead.
                   6325: 
                   6326: If your package makes use of the platform-independent library for loading
                   6327: dynamic shared objects, that comes with libtool (libltdl), you should include
                   6328: devel/libltdl/buildlink3.mk.
                   6329: 
                   6330: Some packages use libtool incorrectly so that the package may not work or build
                   6331: in some circumstances. Some of the more common errors are:
                   6332: 
                   6333:   * The inclusion of a shared object (-module) as a dependent library in an
                   6334:     executable or library. This in itself isn't a problem if one of two things
                   6335:     has been done:
                   6336: 
                   6337:      1. The shared object is named correctly, i.e. libfoo.la, not foo.la
                   6338: 
                   6339:      2. The -dlopen option is used when linking an executable.
                   6340: 
                   6341:   * The use of libltdl without the correct calls to initialisation routines.
                   6342:     The function lt_dlinit() should be called and the macro
                   6343:     LTDL_SET_PRELOADED_SYMBOLS included in executables.
                   6344: 
1.6       rillig   6345: 19.3.3. GNU Autoconf/Automake
1.1       dsieger  6346: 
                   6347: If a package needs GNU autoconf or automake to be executed to regenerate the
                   6348: configure script and Makefile.in makefile templates, then they should be
                   6349: executed in a pre-configure target.
                   6350: 
                   6351: For packages that need only autoconf:
                   6352: 
                   6353: AUTOCONF_REQD=  2.50            # if default version is not good enough
                   6354: USE_TOOLS+=     autoconf        # use "autoconf213" for autoconf-2.13
                   6355: ...
                   6356: 
                   6357: pre-configure:
                   6358:         cd ${WRKSRC} && autoconf
                   6359: 
                   6360: ...
                   6361: 
                   6362: and for packages that need automake and autoconf:
                   6363: 
                   6364: AUTOMAKE_REQD=  1.7.1           # if default version is not good enough
                   6365: USE_TOOLS+=     automake        # use "automake14" for automake-1.4
                   6366: ...
                   6367: 
                   6368: pre-configure:
                   6369:         set -e; cd ${WRKSRC}; \
                   6370:         aclocal; autoheader; automake -a --foreign -i; autoconf
                   6371: 
                   6372: ...
                   6373: 
                   6374: Packages which use GNU Automake will almost certainly require GNU Make.
                   6375: 
                   6376: There are times when the configure process makes additional changes to the
                   6377: generated files, which then causes the build process to try to re-execute the
                   6378: automake sequence. This is prevented by touching various files in the configure
                   6379: stage. If this causes problems with your package you can set AUTOMAKE_OVERRIDE=
                   6380: NO in the package Makefile.
                   6381: 
1.6       rillig   6382: 19.4. Programming languages
1.1       dsieger  6383: 
1.6       rillig   6384: 19.4.1. C, C++, and Fortran
1.1       dsieger  6385: 
                   6386: Compilers for the C, C++, and Fortran languages comes with the NetBSD base
                   6387: system. By default, pkgsrc assumes that a package is written in C and will hide
1.6       rillig   6388: all other compilers (via the wrapper framework, see Chapter 14, Buildlink
1.1       dsieger  6389: methodology).
                   6390: 
                   6391: To declare which language's compiler a package needs, set the USE_LANGUAGES
                   6392: variable. Allowed values currently are "c", "c++", and "fortran" (and any
                   6393: combination). The default is "c". Packages using GNU configure scripts, even if
                   6394: written in C++, usually need a C compiler for the configure phase.
                   6395: 
1.6       rillig   6396: 19.4.2. Java
1.1       dsieger  6397: 
                   6398: If a program is written in Java, use the Java framework in pkgsrc. The package
                   6399: must include ../../mk/java-vm.mk. This Makefile fragment provides the following
                   6400: variables:
                   6401: 
                   6402:   * USE_JAVA defines if a build dependency on the JDK is added. If USE_JAVA is
                   6403:     set to "run", then there is only a runtime dependency on the JDK. The
                   6404:     default is "yes", which also adds a build dependency on the JDK.
                   6405: 
                   6406:   * Set USE_JAVA2 to declare that a package needs a Java2 implementation. The
                   6407:     supported values are "yes", "1.4", and "1.5". "yes" accepts any Java2
                   6408:     implementation, "1.4" insists on versions 1.4 or above, and "1.5" only
                   6409:     accepts versions 1.5 or above. This variable is not set by default.
                   6410: 
1.25      wiz      6411:   * PKG_JAVA_HOME is automatically set to the runtime location of the used Java
                   6412:     implementation dependency. It may be used to set JAVA_HOME to a good value
                   6413:     if the program needs this variable to be defined.
                   6414: 
1.6       rillig   6415: 19.4.3. Packages containing perl scripts
1.1       dsieger  6416: 
                   6417: If your package contains interpreted perl scripts, add "perl" to the USE_TOOLS
                   6418: variable and set REPLACE_PERL to ensure that the proper interpreter path is
                   6419: set. REPLACE_PERL should contain a list of scripts, relative to WRKSRC, that
1.74      wiz      6420: you want adjusted. Every occurrence of */bin/perl in a she-bang line will be
                   6421: replaced with the full path to the perl executable.
1.1       dsieger  6422: 
                   6423: If a particular version of perl is needed, set the PERL5_REQD variable to the
                   6424: version number. The default is "5.0".
                   6425: 
1.6       rillig   6426: See Section 19.6.6, "Packages installing perl modules" for information about
1.1       dsieger  6427: handling perl modules.
                   6428: 
1.41      wiz      6429: 19.4.4. Packages containing shell scripts
                   6430: 
                   6431: REPLACE_SH, REPLACE_BASH, REPLACE_CSH, and REPLACE_KSH can be used to replace
                   6432: shell hash bangs in files. Please use the appropriate one, prefering REPLACE_SH
1.74      wiz      6433: in case this shell is sufficient. Each should contain a list of scripts,
                   6434: relative to WRKSRC, that you want adjusted. Every occurrence of the matching
                   6435: shell in a she-bang line will be replaced with the full path to the shell
                   6436: executable. When using REPLACE_BASH, don't forget to add bash to USE_TOOLS.
1.41      wiz      6437: 
                   6438: 19.4.5. Other programming languages
1.1       dsieger  6439: 
                   6440: Currently, there is no special handling for other languages in pkgsrc. If a
                   6441: compiler package provides a buildlink3.mk file, include that, otherwise just
                   6442: add a (build) dependency on the appropriate compiler package.
                   6443: 
1.108     rillig   6444: 19.5. The build phase
1.1       dsieger  6445: 
                   6446: The most common failures when building a package are that some platforms do not
                   6447: provide certain header files, functions or libraries, or they provide the
                   6448: functions in a library that the original package author didn't know. To work
                   6449: around this, you can rewrite the source code in most cases so that it does not
                   6450: use the missing functions or provides a replacement function.
                   6451: 
1.6       rillig   6452: 19.5.1. Compiling C and C++ code conditionally
1.1       dsieger  6453: 
                   6454: If a package already comes with a GNU configure script, the preferred way to
                   6455: fix the build failure is to change the configure script, not the code. In the
                   6456: other cases, you can utilize the C preprocessor, which defines certain macros
                   6457: depending on the operating system and hardware architecture it compiles for.
                   6458: These macros can be queried using for example #if defined(__i386). Almost every
                   6459: operating system, hardware architecture and compiler has its own macro. For
                   6460: example, if the macros __GNUC__, __i386__ and __NetBSD__ are all defined, you
                   6461: know that you are using NetBSD on an i386 compatible CPU, and your compiler is
                   6462: GCC.
                   6463: 
                   6464: The list of the following macros for hardware and operating system depends on
                   6465: the compiler that is used. For example, if you want to conditionally compile
                   6466: code on Solaris, don't use __sun__, as the SunPro compiler does not define it.
                   6467: Use __sun instead.
                   6468: 
1.6       rillig   6469: 19.5.1.1. C preprocessor macros to identify the operating system
1.1       dsieger  6470: 
                   6471: To distinguish between 4.4 BSD-derived systems and the rest of the world, you
                   6472: should use the following code.
                   6473: 
                   6474: #include <sys/param.h>
                   6475: #if (defined(BSD) && BSD >= 199306)
                   6476: /* BSD-specific code goes here */
                   6477: #else
                   6478: /* non-BSD-specific code goes here */
                   6479: #endif
                   6480: 
                   6481: If this distinction is not fine enough, you can also test for the following
                   6482: macros.
                   6483: 
1.46      obache   6484: Cygwin      __CYGWIN__
                   6485: DragonFly   __DragonFly__
1.1       dsieger  6486: FreeBSD     __FreeBSD__
1.46      obache   6487: Haiku       __HAIKU__
1.1       dsieger  6488: Interix     __INTERIX
                   6489: IRIX        __sgi (TODO: get a definite source for this)
                   6490: Linux       linux, __linux, __linux__
1.83      dholland 6491: Mac OS X    __APPLE__
1.46      obache   6492: MirBSD      __MirBSD__ (__OpenBSD__ is also defined)
                   6493: Minix3      __minix
1.1       dsieger  6494: NetBSD      __NetBSD__
                   6495: OpenBSD     __OpenBSD__
                   6496: Solaris     sun, __sun
                   6497: 
1.6       rillig   6498: 19.5.1.2. C preprocessor macros to identify the hardware architecture
1.1       dsieger  6499: 
                   6500: i386        i386, __i386, __i386__
                   6501: MIPS        __mips
                   6502: SPARC       sparc, __sparc
                   6503: 
1.6       rillig   6504: 19.5.1.3. C preprocessor macros to identify the compiler
1.1       dsieger  6505: 
                   6506: GCC         __GNUC__ (major version), __GNUC_MINOR__
                   6507: MIPSpro     _COMPILER_VERSION (0x741 for MIPSpro 7.41)
                   6508: SunPro      __SUNPRO_C (0x570 for Sun C 5.7)
                   6509: SunPro C++  __SUNPRO_CC (0x580 for Sun C++ 5.8)
                   6510: 
1.6       rillig   6511: 19.5.2. How to handle compiler bugs
1.1       dsieger  6512: 
                   6513: Some source files trigger bugs in the compiler, based on combinations of
                   6514: compiler version and architecture and almost always relation to optimisation
                   6515: being enabled. Common symptoms are gcc internal errors or never finishing
                   6516: compiling a file.
                   6517: 
                   6518: Typically, a workaround involves testing the MACHINE_ARCH and compiler version,
1.87      tnn      6519: disabling optimisation for that combination of file, MACHINE_ARCH and compiler.
                   6520: 
                   6521: This used to be a big problem in the past, but is rarely needed now as compiler
                   6522: technology has matured. If you still need to add a compiler specific
                   6523: workaround, please do so in the file hacks.mk and describe the symptom and
                   6524: compiler version as detailed as possible.
1.1       dsieger  6525: 
1.6       rillig   6526: 19.5.3. Undefined reference to "..."
1.1       dsieger  6527: 
                   6528: This error message often means that a package did not link to a shared library
                   6529: it needs. The following functions are known to cause this error message over
                   6530: and over.
                   6531: 
                   6532: +-----------------------------------------------------+
                   6533: |        Function         |Library |Affected platforms|
                   6534: |-------------------------+--------+------------------|
                   6535: |accept, bind, connect    |-lsocket|Solaris           |
                   6536: |-------------------------+--------+------------------|
                   6537: |crypt                    |-lcrypt |DragonFly, NetBSD |
                   6538: |-------------------------+--------+------------------|
                   6539: |dlopen, dlsym            |-ldl    |Linux             |
                   6540: |-------------------------+--------+------------------|
                   6541: |gethost*                 |-lnsl   |Solaris           |
                   6542: |-------------------------+--------+------------------|
                   6543: |inet_aton                |-lresolv|Solaris           |
                   6544: |-------------------------+--------+------------------|
                   6545: |nanosleep, sem_*, timer_*|-lrt    |Solaris           |
                   6546: |-------------------------+--------+------------------|
                   6547: |openpty                  |-lutil  |Linux             |
                   6548: +-----------------------------------------------------+
                   6549: 
                   6550: To fix these linker errors, it is often sufficient to say LIBS.OperatingSystem+
                   6551: = -lfoo to the package Makefile and then say bmake clean; bmake.
                   6552: 
1.6       rillig   6553: 19.5.3.1. Special issue: The SunPro compiler
1.1       dsieger  6554: 
                   6555: When you are using the SunPro compiler, there is another possibility. That
                   6556: compiler cannot handle the following code:
                   6557: 
                   6558: extern int extern_func(int);
                   6559: 
                   6560: static inline int
                   6561: inline_func(int x)
                   6562: {
                   6563:         return extern_func(x);
                   6564: }
                   6565: 
                   6566: int main(void)
                   6567: {
                   6568:         return 0;
                   6569: }
                   6570: 
                   6571: It generates the code for inline_func even if that function is never used. This
                   6572: code then refers to extern_func, which can usually not be resolved. To solve
                   6573: this problem you can try to tell the package to disable inlining of functions.
                   6574: 
1.6       rillig   6575: 19.5.4. Running out of memory
1.1       dsieger  6576: 
                   6577: Sometimes packages fail to build because the compiler runs into an operating
                   6578: system specific soft limit. With the UNLIMIT_RESOURCES variable pkgsrc can be
1.94      wiz      6579: told to unlimit the resources. Currently, the allowed values are any
                   6580: combination of "cputime", "datasize", "memorysize", and "stacksize". Setting
                   6581: this variable is similar to running the shell builtin ulimit command to raise
                   6582: the maximum data segment size or maximum stack size of a process, respectively,
                   6583: to their hard limits.
1.1       dsieger  6584: 
1.108     rillig   6585: 19.6. The install phase
1.1       dsieger  6586: 
1.6       rillig   6587: 19.6.1. Creating needed directories
1.1       dsieger  6588: 
                   6589: The BSD-compatible install supplied with some operating systems cannot create
                   6590: more than one directory at a time. As such, you should call ${INSTALL_*_DIR}
                   6591: like this:
                   6592: 
                   6593: ${INSTALL_DATA_DIR} ${PREFIX}/dir1
                   6594: ${INSTALL_DATA_DIR} ${PREFIX}/dir2
                   6595: 
                   6596: You can also just append "dir1 dir2" to the INSTALLATION_DIRS variable, which
                   6597: will automatically do the right thing.
                   6598: 
1.6       rillig   6599: 19.6.2. Where to install documentation
1.1       dsieger  6600: 
                   6601: In general, documentation should be installed into ${PREFIX}/share/doc/$
                   6602: {PKGBASE} or ${PREFIX}/share/doc/${PKGNAME} (the latter includes the version
                   6603: number of the package).
                   6604: 
                   6605: Many modern packages using GNU autoconf allow to set the directory where HTML
                   6606: documentation is installed with the "--with-html-dir" option. Sometimes using
                   6607: this flag is needed because otherwise the documentation ends up in ${PREFIX}/
                   6608: share/doc/html or other places.
                   6609: 
                   6610: An exception to the above is that library API documentation generated with the
                   6611: textproc/gtk-doc tools, for use by special browsers (devhelp) should be left at
                   6612: their default location, which is ${PREFIX}/share/gtk-doc. Such documentation
                   6613: can be recognized from files ending in .devhelp or .devhelp2. (It is also
                   6614: acceptable to install such files in ${PREFIX}/share/doc/${PKGBASE} or ${PREFIX}
                   6615: /share/doc/${PKGNAME}; the .devhelp* file must be directly in that directory
                   6616: then, no additional subdirectory level is allowed in this case. This is usually
                   6617: achieved by using "--with-html-dir=${PREFIX}/share/doc". ${PREFIX}/share/
                   6618: gtk-doc is preferred though.)
                   6619: 
1.6       rillig   6620: 19.6.3. Installing highscore files
1.1       dsieger  6621: 
                   6622: Certain packages, most of them in the games category, install a score file that
                   6623: allows all users on the system to record their highscores. In order for this to
                   6624: work, the binaries need to be installed setgid and the score files owned by the
1.36      wiz      6625: appropriate group and/or owner (traditionally the "games" user/group). Set
                   6626: USE_GAMESGROUP to yes to support this. The following variables, documented in
                   6627: more detail in mk/defaults/mk.conf, control this behaviour: GAMEDATAMODE,
1.100     leot     6628: GAMEDIRMODE, GAMES_GROUP, GAMEMODE, GAME_USER. Other useful variables are:
                   6629: GAMEDIR_PERMS, GAMEDATA_PERMS and SETGID_GAMES_PERMS.
                   6630: 
                   6631: An example that illustrates some of the variables described above is games/
                   6632: moon-buggy. OWN_DIRS_PERMS is used to properly set directory permissions of the
                   6633: directory where the scorefile is saved, REQD_FILES_PERMS is used to create a
                   6634: dummy scorefile (mbscore) with the proper permissions and SPECIAL_PERMS is used
                   6635: to install setgid the game binary:
                   6636: 
                   6637: USE_GAMESGROUP=         yes
                   6638: 
                   6639: BUILD_DEFS+=            VARBASE
                   6640: 
                   6641: OWN_DIRS_PERMS+=        ${VARBASE}/games/moon-buggy ${GAMEDIR_PERMS}
                   6642: REQD_FILES_PERMS+=      /dev/null ${VARBASE}/games/moon-buggy/mbscore ${GAMEDATA_PERMS}
                   6643: SPECIAL_PERMS+=         ${PREFIX}/bin/moon-buggy ${SETGID_GAMES_PERMS}
                   6644: 
                   6645: Various INSTALL_* variables are also available: INSTALL_GAME to install setgid
                   6646: game binaries, INSTALL_GAME_DIR to install game directories that are needed to
                   6647: be accessed by setgid games and INSTALL_GAME_DATA to install scorefiles.
1.1       dsieger  6648: 
1.14      jmcneill 6649: A package should therefore never hard code file ownership or access permissions
1.100     leot     6650: but rely on *_PERMS as described above or alternatively on INSTALL_GAME,
                   6651: INSTALL_GAME_DATA and INSTALL_GAME_DIR to set these correctly.
1.1       dsieger  6652: 
1.6       rillig   6653: 19.6.4. Adding DESTDIR support to packages
1.4       rillig   6654: 
1.14      jmcneill 6655: DESTDIR support means that a package installs into a staging directory, not the
                   6656: final location of the files. Then a binary package is created which can be used
                   6657: for installation as usual. There are two ways: Either the package must install
1.25      wiz      6658: as root ("destdir") or the package can install as non-root user ("user-destdir"
                   6659: ).
1.14      jmcneill 6660: 
1.113     leot     6661:   * PKG_DESTDIR_SUPPORT has to be set to "destdir" or "user-destdir". By
                   6662:     default PKG_DESTDIR_SUPPORT is set to "user-destdir" to help catching more
                   6663:     potential packaging problems. If bsd.prefs.mk is included in the Makefile,
                   6664:     PKG_DESTDIR_SUPPORT needs to be set before the inclusion.
1.14      jmcneill 6665: 
1.4       rillig   6666:   * All installation operations have to be prefixed with ${DESTDIR}.
                   6667: 
                   6668:   * automake gets this DESTDIR mostly right automatically. Many manual rules
                   6669:     and pre/post-install often are incorrect; fix them.
                   6670: 
1.17      imil     6671:   * If files are installed with special owner/group use SPECIAL_PERMS.
1.4       rillig   6672: 
                   6673:   * In general, packages should support UNPRIVILEGED to be able to use DESTDIR.
                   6674: 
1.6       rillig   6675: 19.6.5. Packages with hardcoded paths to other interpreters
1.1       dsieger  6676: 
                   6677: Your package may also contain scripts with hardcoded paths to other
                   6678: interpreters besides (or as well as) perl. To correct the full pathname to the
                   6679: script interpreter, you need to set the following definitions in your Makefile
                   6680: (we shall use tclsh in this example):
                   6681: 
                   6682: REPLACE_INTERPRETER+=   tcl
                   6683: REPLACE.tcl.old=        .*/bin/tclsh
                   6684: REPLACE.tcl.new=        ${PREFIX}/bin/tclsh
                   6685: REPLACE_FILES.tcl=      # list of tcl scripts which need to be fixed,
                   6686: # relative to ${WRKSRC}, just as in REPLACE_PERL
                   6687: 
                   6688: Note
                   6689: 
                   6690: Before March 2006, these variables were called _REPLACE.* and _REPLACE_FILES.*.
                   6691: 
1.6       rillig   6692: 19.6.6. Packages installing perl modules
1.1       dsieger  6693: 
                   6694: Makefiles of packages providing perl5 modules should include the Makefile
                   6695: fragment ../../lang/perl5/module.mk. It provides a do-configure target for the
                   6696: standard perl configuration for such modules as well as various hooks to tune
                   6697: this configuration. See comments in this file for details.
                   6698: 
                   6699: Perl5 modules will install into different places depending on the version of
                   6700: perl used during the build process. To address this, pkgsrc will append lines
                   6701: to the PLIST corresponding to the files listed in the installed .packlist file
                   6702: generated by most perl5 modules. This is invoked by defining PERL5_PACKLIST to
1.48      wiz      6703: a space-separated list of packlist files relative to PERL5_PACKLIST_DIR
                   6704: (PERL5_INSTALLVENDORARCH by default), e.g.:
1.1       dsieger  6705: 
1.48      wiz      6706: PERL5_PACKLIST= auto/Pg/.packlist
1.1       dsieger  6707: 
1.48      wiz      6708: The perl5 config variables installarchlib, installscript, installvendorbin,
                   6709: installvendorscript, installvendorarch, installvendorlib, installvendorman1dir,
                   6710: and installvendorman3dir represent those locations in which components of perl5
                   6711: modules may be installed, provided as variable with uppercase and prefixed with
                   6712: PERL5_, e.g. PERL5_INSTALLARCHLIB and may be used by perl5 packages that don't
                   6713: have a packlist. These variables are also substituted for in the PLIST as
                   6714: uppercase prefixed with PERL5_SUB_.
1.1       dsieger  6715: 
1.6       rillig   6716: 19.6.7. Packages installing info files
1.1       dsieger  6717: 
                   6718: Some packages install info files or use the "makeinfo" or "install-info"
                   6719: commands. INFO_FILES should be defined in the package Makefile so that INSTALL
                   6720: and DEINSTALL scripts will be generated to handle registration of the info
                   6721: files in the Info directory file. The "install-info" command used for the info
                   6722: files registration is either provided by the system, or by a special purpose
                   6723: package automatically added as dependency if needed.
                   6724: 
                   6725: PKGINFODIR is the directory under ${PREFIX} where info files are primarily
                   6726: located. PKGINFODIR defaults to "info" and can be overridden by the user.
                   6727: 
                   6728: The info files for the package should be listed in the package PLIST; however
                   6729: any split info files need not be listed.
                   6730: 
                   6731: A package which needs the "makeinfo" command at build time must add "makeinfo"
                   6732: to USE_TOOLS in its Makefile. If a minimum version of the "makeinfo" command is
                   6733: needed it should be noted with the TEXINFO_REQD variable in the package
                   6734: Makefile. By default, a minimum version of 3.12 is required. If the system does
                   6735: not provide a makeinfo command or if it does not match the required minimum, a
                   6736: build dependency on the devel/gtexinfo package will be added automatically.
                   6737: 
                   6738: The build and installation process of the software provided by the package
                   6739: should not use the install-info command as the registration of info files is
1.25      wiz      6740: the task of the package INSTALL script, and it must use the appropriate 
1.1       dsieger  6741: makeinfo command.
                   6742: 
                   6743: To achieve this goal, the pkgsrc infrastructure creates overriding scripts for
                   6744: the install-info and makeinfo commands in a directory listed early in PATH.
                   6745: 
                   6746: The script overriding install-info has no effect except the logging of a
                   6747: message. The script overriding makeinfo logs a message and according to the
                   6748: value of TEXINFO_REQD either runs the appropriate makeinfo command or exit on
                   6749: error.
                   6750: 
1.6       rillig   6751: 19.6.8. Packages installing man pages
1.1       dsieger  6752: 
                   6753: All packages that install manual pages should install them into the same
                   6754: directory, so that there is one common place to look for them. In pkgsrc, this
                   6755: place is ${PREFIX}/${PKGMANDIR}, and this expression should be used in
1.25      wiz      6756: packages. The default for PKGMANDIR is "man". Another often-used value is "
                   6757: share/man".
1.1       dsieger  6758: 
                   6759: Note
                   6760: 
                   6761: The support for a custom PKGMANDIR is far from complete.
                   6762: 
                   6763: The PLIST files can just use man/ as the top level directory for the man page
                   6764: file entries, and the pkgsrc framework will convert as needed. In all other
                   6765: places, the correct PKGMANDIR must be used.
                   6766: 
                   6767: Packages that are configured with GNU_CONFIGURE set as "yes", by default will
                   6768: use the ./configure --mandir switch to set where the man pages should be
                   6769: installed. The path is GNU_CONFIGURE_MANDIR which defaults to ${PREFIX}/$
                   6770: {PKGMANDIR}.
                   6771: 
                   6772: Packages that use GNU_CONFIGURE but do not use --mandir, can set
                   6773: CONFIGURE_HAS_MANDIR to "no". Or if the ./configure script uses a non-standard
                   6774: use of --mandir, you can set GNU_CONFIGURE_MANDIR as needed.
                   6775: 
1.6       rillig   6776: See Section 13.5, "Man page compression" for information on installation of
1.1       dsieger  6777: compressed manual pages.
                   6778: 
1.7       rillig   6779: 19.6.9. Packages installing GConf data files
1.1       dsieger  6780: 
1.7       rillig   6781: If a package installs .schemas or .entries files, used by GConf, you need to
1.1       dsieger  6782: take some extra steps to make sure they get registered in the database:
                   6783: 
1.7       rillig   6784:  1. Include ../../devel/GConf/schemas.mk instead of its buildlink3.mk file.
                   6785:     This takes care of rebuilding the GConf database at installation and
                   6786:     deinstallation time, and tells the package where to install GConf data
1.1       dsieger  6787:     files using some standard configure arguments. It also disallows any access
                   6788:     to the database directly from the package.
                   6789: 
                   6790:  2. Ensure that the package installs its .schemas files under ${PREFIX}/share/
                   6791:     gconf/schemas. If they get installed under ${PREFIX}/etc, you will need to
                   6792:     manually patch the package.
                   6793: 
                   6794:  3. Check the PLIST and remove any entries under the etc/gconf directory, as
1.84      wiz      6795:     they will be handled automatically. See Section 9.13, "How do I change the
1.1       dsieger  6796:     location of configuration files?" for more information.
                   6797: 
1.7       rillig   6798:  4. Define the GCONF_SCHEMAS variable in your Makefile with a list of all
1.1       dsieger  6799:     .schemas files installed by the package, if any. Names must not contain any
                   6800:     directories in them.
                   6801: 
1.7       rillig   6802:  5. Define the GCONF_ENTRIES variable in your Makefile with a list of all
1.1       dsieger  6803:     .entries files installed by the package, if any. Names must not contain any
                   6804:     directories in them.
                   6805: 
1.18      mishka   6806: 19.6.10. Packages installing scrollkeeper/rarian data files
1.1       dsieger  6807: 
1.18      mishka   6808: If a package installs .omf files, used by scrollkeeper/rarian, you need to take
                   6809: some extra steps to make sure they get registered in the database:
1.1       dsieger  6810: 
1.18      mishka   6811:  1. Include ../../mk/omf-scrollkeeper.mk instead of rarian's buildlink3.mk
                   6812:     file. This takes care of rebuilding the scrollkeeper database at
                   6813:     installation and deinstallation time, and disallows any access to it
                   6814:     directly from the package.
1.1       dsieger  6815: 
                   6816:  2. Check the PLIST and remove any entries under the libdata/scrollkeeper
                   6817:     directory, as they will be handled automatically.
                   6818: 
                   6819:  3. Remove the share/omf directory from the PLIST. It will be handled by
1.18      mishka   6820:     rarian. (make print-PLIST does this automatically.)
1.1       dsieger  6821: 
1.6       rillig   6822: 19.6.11. Packages installing X11 fonts
1.1       dsieger  6823: 
                   6824: If a package installs font files, you will need to rebuild the fonts database
                   6825: in the directory where they get installed at installation and deinstallation
                   6826: time. This can be automatically done by using the pkginstall framework.
                   6827: 
                   6828: You can list the directories where fonts are installed in the FONTS_DIRS.type
                   6829: variables, where type can be one of "ttf", "type1" or "x11". Also make sure
                   6830: that the database file fonts.dir is not listed in the PLIST.
                   6831: 
                   6832: Note that you should not create new directories for fonts; instead use the
                   6833: standard ones to avoid that the user needs to manually configure his X server
                   6834: to find them.
                   6835: 
1.6       rillig   6836: 19.6.12. Packages installing GTK2 modules
1.1       dsieger  6837: 
                   6838: If a package installs GTK2 immodules or loaders, you need to take some extra
                   6839: steps to get them registered in the GTK2 database properly:
                   6840: 
                   6841:  1. Include ../../x11/gtk2/modules.mk instead of its buildlink3.mk file. This
                   6842:     takes care of rebuilding the database at installation and deinstallation
                   6843:     time.
                   6844: 
                   6845:  2. Set GTK2_IMMODULES=YES if your package installs GTK2 immodules.
                   6846: 
                   6847:  3. Set GTK2_LOADERS=YES if your package installs GTK2 loaders.
                   6848: 
                   6849:  4. Patch the package to not touch any of the GTK2 databases directly. These
                   6850:     are:
                   6851: 
1.42      asau     6852:       + libdata/gtk-2.0/gdk-pixbuf.loaders
1.1       dsieger  6853: 
1.42      asau     6854:       + libdata/gtk-2.0/gtk.immodules
1.1       dsieger  6855: 
                   6856:  5. Check the PLIST and remove any entries under the libdata/gtk-2.0 directory,
                   6857:     as they will be handled automatically.
                   6858: 
1.6       rillig   6859: 19.6.13. Packages installing SGML or XML data
1.1       dsieger  6860: 
                   6861: If a package installs SGML or XML data files that need to be registered in
                   6862: system-wide catalogs (like DTDs, sub-catalogs, etc.), you need to take some
                   6863: extra steps:
                   6864: 
                   6865:  1. Include ../../textproc/xmlcatmgr/catalogs.mk in your Makefile, which takes
                   6866:     care of registering those files in system-wide catalogs at installation and
                   6867:     deinstallation time.
                   6868: 
                   6869:  2. Set SGML_CATALOGS to the full path of any SGML catalogs installed by the
                   6870:     package.
                   6871: 
                   6872:  3. Set XML_CATALOGS to the full path of any XML catalogs installed by the
                   6873:     package.
                   6874: 
                   6875:  4. Set SGML_ENTRIES to individual entries to be added to the SGML catalog.
                   6876:     These come in groups of three strings; see xmlcatmgr(1) for more
                   6877:     information (specifically, arguments recognized by the 'add' action). Note
                   6878:     that you will normally not use this variable.
                   6879: 
                   6880:  5. Set XML_ENTRIES to individual entries to be added to the XML catalog. These
                   6881:     come in groups of three strings; see xmlcatmgr(1) for more information
                   6882:     (specifically, arguments recognized by the 'add' action). Note that you
                   6883:     will normally not use this variable.
                   6884: 
1.6       rillig   6885: 19.6.14. Packages installing extensions to the MIME database
1.1       dsieger  6886: 
                   6887: If a package provides extensions to the MIME database by installing .xml files
                   6888: inside ${PREFIX}/share/mime/packages, you need to take some extra steps to
                   6889: ensure that the database is kept consistent with respect to these new files:
                   6890: 
                   6891:  1. Include ../../databases/shared-mime-info/mimedb.mk (avoid using the
                   6892:     buildlink3.mk file from this same directory, which is reserved for
                   6893:     inclusion from other buildlink3.mk files). It takes care of rebuilding the
                   6894:     MIME database at installation and deinstallation time, and disallows any
                   6895:     access to it directly from the package.
                   6896: 
1.25      wiz      6897:  2. Check the PLIST and remove any entries under the share/mime directory, 
1.1       dsieger  6898:     except for files saved under share/mime/packages. The former are handled
                   6899:     automatically by the update-mime-database program, but the latter are
                   6900:     package-dependent and must be removed by the package that installed them in
                   6901:     the first place.
                   6902: 
                   6903:  3. Remove any share/mime/* directories from the PLIST. They will be handled by
                   6904:     the shared-mime-info package.
                   6905: 
1.6       rillig   6906: 19.6.15. Packages using intltool
1.1       dsieger  6907: 
                   6908: If a package uses intltool during its build, add intltool to the USE_TOOLS,
                   6909: which forces it to use the intltool package provided by pkgsrc, instead of the
                   6910: one bundled with the distribution file.
                   6911: 
                   6912: This tracks intltool's build-time dependencies and uses the latest available
                   6913: version; this way, the package benefits of any bug fixes that may have appeared
                   6914: since it was released.
                   6915: 
1.6       rillig   6916: 19.6.16. Packages installing startup scripts
1.1       dsieger  6917: 
                   6918: If a package contains a rc.d script, it won't be copied into the startup
                   6919: directory by default, but you can enable it, by adding the option
1.4       rillig   6920: PKG_RCD_SCRIPTS=YES in mk.conf. This option will copy the scripts into /etc/
                   6921: rc.d when a package is installed, and it will automatically remove the scripts
                   6922: when the package is deinstalled.
1.1       dsieger  6923: 
1.6       rillig   6924: 19.6.17. Packages installing TeX modules
1.1       dsieger  6925: 
                   6926: If a package installs TeX packages into the texmf tree, the ls-R database of
                   6927: the tree needs to be updated.
                   6928: 
                   6929: Note
                   6930: 
1.23      jakllsch 6931: Except the main TeX packages such as kpathsea, packages should install files
                   6932: into ${PREFIX}/share/texmf-dist, not ${PREFIX}/share/texmf.
1.1       dsieger  6933: 
1.23      jakllsch 6934:  1. Include ../../print/kpathsea/texmf.mk. This takes care of rebuilding the
                   6935:     ls-R database at installation and deinstallation time.
1.1       dsieger  6936: 
1.23      jakllsch 6937:  2. If your package installs files into a texmf tree other than the one at $
                   6938:     {PREFIX}/share/texmf-dist, set TEX_TEXMF_DIRS to the list of all texmf
                   6939:     trees that need database update.
1.1       dsieger  6940: 
                   6941:     If your package also installs font map files that need to be registered
1.30      dholland 6942:     using updmap, include ../../print/tex-tetex/map.mk and set TEX_MAP_FILES
                   6943:     and/or TEX_MIXEDMAP_FILES to the list of all such font map files. Then 
                   6944:     updmap will be run automatically at installation/deinstallation to enable/
                   6945:     disable font map files for TeX output drivers.
1.1       dsieger  6946: 
                   6947:  3. Make sure that none of ls-R databases are included in PLIST, as they will
1.30      dholland 6948:     be removed only by the kpathsea package.
1.1       dsieger  6949: 
1.6       rillig   6950: 19.6.18. Packages supporting running binaries in emulation
1.1       dsieger  6951: 
                   6952: There are some packages that provide libraries and executables for running
                   6953: binaries from a one operating system on a different one (if the latter supports
                   6954: it). One example is running Linux binaries on NetBSD.
                   6955: 
                   6956: The pkgtools/rpm2pkg helps in extracting and packaging Linux rpm packages.
                   6957: 
                   6958: The CHECK_SHLIBS can be set to no to avoid the check-shlibs target, which tests
                   6959: if all libraries for each installed executable can be found by the dynamic
                   6960: linker. Since the standard dynamic linker is run, this fails for emulation
                   6961: packages, because the libraries used by the emulation are not in the standard
                   6962: directories.
                   6963: 
1.6       rillig   6964: 19.6.19. Packages installing hicolor theme icons
1.1       dsieger  6965: 
                   6966: If a package installs images under the share/icons/hicolor and/or updates the
                   6967: share/icons/hicolor/icon-theme.cache database, you need to take some extra
                   6968: steps to make sure that the shared theme directory is handled appropriately and
                   6969: that the cache database is rebuilt:
                   6970: 
                   6971:  1. Include ../../graphics/hicolor-icon-theme/buildlink3.mk.
                   6972: 
                   6973:  2. Check the PLIST and remove the entry that refers to the theme cache.
                   6974: 
                   6975:  3. Ensure that the PLIST does not remove the shared icon directories from the
                   6976:     share/icons/hicolor hierarchy because they will be handled automatically.
                   6977: 
                   6978: The best way to verify that the PLIST is correct with respect to the last two
                   6979: points is to regenerate it using make print-PLIST.
                   6980: 
1.6       rillig   6981: 19.6.20. Packages installing desktop files
1.1       dsieger  6982: 
                   6983: If a package installs .desktop files under share/applications and these include
1.54      rodent   6984: MIME information (MimeType key), you need to take extra steps to ensure that
                   6985: they are registered into the MIME database:
1.1       dsieger  6986: 
                   6987:  1. Include ../../sysutils/desktop-file-utils/desktopdb.mk.
                   6988: 
                   6989:  2. Check the PLIST and remove the entry that refers to the share/applications/
                   6990:     mimeinfo.cache file. It will be handled automatically.
                   6991: 
                   6992: The best way to verify that the PLIST is correct with respect to the last point
                   6993: is to regenerate it using make print-PLIST.
                   6994: 
1.6       rillig   6995: 19.7. Marking packages as having problems
1.1       dsieger  6996: 
1.23      jakllsch 6997: In some cases one does not have the time to solve a problem immediately. In
                   6998: this case, one can plainly mark a package as broken. For this, one just sets
                   6999: the variable BROKEN to the reason why the package is broken (similar to the
                   7000: RESTRICTED variable). A user trying to build the package will immediately be
                   7001: shown this message, and the build will not be even tried.
1.1       dsieger  7002: 
1.23      jakllsch 7003: BROKEN packages are removed from pkgsrc in irregular intervals.
1.1       dsieger  7004: 
1.6       rillig   7005: Chapter 20. Debugging
1.1       dsieger  7006: 
                   7007: To check out all the gotchas when building a package, here are the steps that I
                   7008: do in order to get a package working. Please note this is basically the same as
                   7009: what was explained in the previous sections, only with some debugging aids.
                   7010: 
1.4       rillig   7011:   * Be sure to set PKG_DEVELOPER=yes in mk.conf.
1.1       dsieger  7012: 
                   7013:   * Install pkgtools/url2pkg, create a directory for a new package, change into
                   7014:     it, then run url2pkg:
                   7015: 
                   7016:     % mkdir /usr/pkgsrc/category/examplepkg
                   7017:     % cd /usr/pkgsrc/category/examplepkg
                   7018:     % url2pkg http://www.example.com/path/to/distfile.tar.gz
                   7019: 
                   7020:   * Edit the Makefile as requested.
                   7021: 
                   7022:   * Fill in the DESCR file
                   7023: 
                   7024:   * Run make configure
                   7025: 
                   7026:   * Add any dependencies glimpsed from documentation and the configure step to
                   7027:     the package's Makefile.
                   7028: 
                   7029:   * Make the package compile, doing multiple rounds of
                   7030: 
                   7031:     % make
                   7032:     % pkgvi ${WRKSRC}/some/file/that/does/not/compile
                   7033:     % mkpatches
                   7034:     % patchdiff
                   7035:     % mv ${WRKDIR}/.newpatches/* patches
                   7036:     % make mps
                   7037:     % make clean
                   7038: 
                   7039:     Doing this step as non-root user will ensure that no files are modified
                   7040:     that shouldn't be, especially during the build phase. mkpatches, patchdiff
                   7041:     and pkgvi are from the pkgtools/pkgdiff package.
                   7042: 
1.6       rillig   7043:   * Look at the Makefile, fix if necessary; see Section 11.1, "Makefile".
1.1       dsieger  7044: 
                   7045:   * Generate a PLIST:
                   7046: 
                   7047:     # make install
                   7048:     # make print-PLIST >PLIST
                   7049:     # make deinstall
                   7050:     # make install
                   7051:     # make deinstall
                   7052: 
                   7053:     You usually need to be root to do this. Look if there are any files left:
                   7054: 
                   7055:     # make print-PLIST
                   7056: 
                   7057:     If this reveals any files that are missing in PLIST, add them.
                   7058: 
                   7059:   * Now that the PLIST is OK, install the package again and make a binary
                   7060:     package:
                   7061: 
                   7062:     # make reinstall
                   7063:     # make package
                   7064: 
                   7065:   * Delete the installed package:
                   7066: 
                   7067:     # pkg_delete examplepkg
                   7068: 
                   7069:   * Repeat the above make print-PLIST command, which shouldn't find anything
                   7070:     now:
                   7071: 
                   7072:     # make print-PLIST
                   7073: 
                   7074:   * Reinstall the binary package:
                   7075: 
                   7076:     # pkg_add .../examplepkg.tgz
                   7077: 
                   7078:   * Play with it. Make sure everything works.
                   7079: 
                   7080:   * Run pkglint from pkgtools/pkglint, and fix the problems it reports:
                   7081: 
                   7082:     # pkglint
                   7083: 
1.6       rillig   7084:   * Submit (or commit, if you have cvs access); see Chapter 21, Submitting and
1.1       dsieger  7085:     Committing.
                   7086: 
1.6       rillig   7087: Chapter 21. Submitting and Committing
1.1       dsieger  7088: 
                   7089: Table of Contents
                   7090: 
1.6       rillig   7091: 21.1. Submitting binary packages
                   7092: 21.2. Submitting source packages (for non-NetBSD-developers)
                   7093: 21.3. General notes when adding, updating, or removing packages
1.34      wiz      7094: 21.4. Committing: Adding a package to CVS
1.6       rillig   7095: 21.5. Updating a package to a newer version
1.21      snj      7096: 21.6. Renaming a package in pkgsrc
                   7097: 21.7. Moving a package in pkgsrc
1.1       dsieger  7098: 
1.6       rillig   7099: 21.1. Submitting binary packages
1.1       dsieger  7100: 
                   7101: Our policy is that we accept binaries only from pkgsrc developers to guarantee
                   7102: that the packages don't contain any trojan horses etc. This is not to annoy
                   7103: anyone but rather to protect our users! You're still free to put up your
                   7104: home-made binary packages and tell the world where to get them. NetBSD
1.66      asau     7105: developers doing bulk builds and wanting to upload them please see Chapter 7, 
                   7106: Creating binary packages for everything in pkgsrc (bulk builds).
1.1       dsieger  7107: 
1.6       rillig   7108: 21.2. Submitting source packages (for non-NetBSD-developers)
1.1       dsieger  7109: 
                   7110: First, check that your package is complete, compiles and runs well; see
1.6       rillig   7111: Chapter 20, Debugging and the rest of this document. Next, generate an
1.1       dsieger  7112: uuencoded gzipped tar(1) archive that contains all files that make up the
                   7113: package. Finally, send this package to the pkgsrc bug tracking system, either
                   7114: with the send-pr(1) command, or if you don't have that, go to the web page
1.4       rillig   7115: http://www.NetBSD.org/support/send-pr.html, which contains some instructions
1.22      snj      7116: and a link to a form where you can submit packages. The sysutils/gtk-send-pr
                   7117: package is also available as a substitute for either of the above two tools.
1.1       dsieger  7118: 
                   7119: In the form of the problem report, the category should be "pkg", the synopsis
                   7120: should include the package name and version number, and the description field
                   7121: should contain a short description of your package (contents of the COMMENT
1.25      wiz      7122: variable or DESCR file are OK). The uuencoded package data should go into the "
                   7123: fix" field.
1.1       dsieger  7124: 
                   7125: If you want to submit several packages, please send a separate PR for each one,
                   7126: it's easier for us to track things that way.
                   7127: 
                   7128: Alternatively, you can also import new packages into pkgsrc-wip ("pkgsrc
1.105     wiz      7129: work-in-progress"); see the homepage at http://pkgsrc.org/wip/ for details.
1.1       dsieger  7130: 
1.6       rillig   7131: 21.3. General notes when adding, updating, or removing packages
1.1       dsieger  7132: 
                   7133: Please note all package additions, updates, moves, and removals in pkgsrc/doc/
                   7134: CHANGES-YYYY. It's very important to keep this file up to date and conforming
                   7135: to the existing format, because it will be used by scripts to automatically
                   7136: update pages on www.NetBSD.org and other sites. Additionally, check the pkgsrc/
                   7137: doc/TODO file and remove the entry for the package you updated or removed, in
                   7138: case it was mentioned there.
                   7139: 
                   7140: When the PKGREVISION of a package is bumped, the change should appear in pkgsrc
                   7141: /doc/CHANGES-YYYY if it is security related or otherwise relevant. Mass bumps
                   7142: that result from a dependency being updated should not be mentioned. In all
                   7143: other cases it's the developer's decision.
                   7144: 
                   7145: There is a make target that helps in creating proper CHANGES-YYYY entries: make
                   7146: changes-entry. It uses the optional CTYPE and NETBSD_LOGIN_NAME variables. The
                   7147: general usage is to first make sure that your CHANGES-YYYY file is up-to-date
                   7148: (to avoid having to resolve conflicts later-on) and then to cd to the package
                   7149: directory. For package updates, make changes-entry is enough. For new packages,
                   7150: or package moves or removals, set the CTYPE variable on the command line to
1.4       rillig   7151: "Added", "Moved", or "Removed". You can set NETBSD_LOGIN_NAME in mk.conf if
1.23      jakllsch 7152: your local login name is not the same as your NetBSD login name. The target
                   7153: also automatically removes possibly existing entries for the package in the
                   7154: TODO file. Don't forget to commit the changes, e.g. by using make
1.66      asau     7155: commit-changes-entry! If you are not using a checkout directly from
1.23      jakllsch 7156: cvs.NetBSD.org, but e.g. a local copy of the repository, you can set
                   7157: USE_NETBSD_REPO=yes. This makes the cvs commands use the main repository.
1.1       dsieger  7158: 
1.34      wiz      7159: 21.4. Committing: Adding a package to CVS
1.1       dsieger  7160: 
                   7161: This section is only of interest for pkgsrc developers with write access to the
1.34      wiz      7162: pkgsrc repository.
                   7163: 
                   7164: When the package is finished, "cvs add" the files. Start by adding the
                   7165: directory and then files in the directory. Don't forget to add the new package
                   7166: to the category's Makefile. Make sure you don't forget any files; you can check
                   7167: by running "cvs status". An example:
                   7168: 
                   7169: $ cd .../pkgsrc/category
                   7170: $ cvs add pkgname
                   7171: $ cd pkgname
                   7172: $ cvs add DESCR Makefile PLIST distinfo buildlink3.mk patches
                   7173: $ cvs add patches/p*
                   7174: $ cvs status | less
1.35      wiz      7175: $ cvs commit
1.34      wiz      7176: $ cd ..
                   7177: $ vi Makefile # add SUBDIRS+=pkgname line
1.35      wiz      7178: $ cvs commit Makefile
1.66      asau     7179: $ cd pkgname
1.73      jnemeth  7180: $ make CTYPE=Added commit-changes-entry
1.1       dsieger  7181: 
                   7182: The commit message of the initial import should include part of the DESCR file,
                   7183: so people reading the mailing lists know what the package is/does.
                   7184: 
1.34      wiz      7185: Also mention the new package in pkgsrc/doc/CHANGES-20xx.
                   7186: 
                   7187: Previously, "cvs import" was suggested, but it was much easier to get wrong
                   7188: than "cvs add".
1.1       dsieger  7189: 
1.6       rillig   7190: 21.5. Updating a package to a newer version
1.1       dsieger  7191: 
                   7192: Please always put a concise, appropriate and relevant summary of the changes
                   7193: between old and new versions into the commit log when updating a package. There
                   7194: are various reasons for this:
                   7195: 
                   7196:   * A URL is volatile, and can change over time. It may go away completely or
                   7197:     its information may be overwritten by newer information.
                   7198: 
                   7199:   * Having the change information between old and new versions in our CVS
                   7200:     repository is very useful for people who use either cvs or anoncvs.
                   7201: 
                   7202:   * Having the change information between old and new versions in our CVS
                   7203:     repository is very useful for people who read the pkgsrc-changes mailing
                   7204:     list, so that they can make tactical decisions about when to upgrade the
                   7205:     package.
                   7206: 
                   7207: Please also recognize that, just because a new version of a package has been
                   7208: released, it should not automatically be upgraded in the CVS repository. We
                   7209: prefer to be conservative in the packages that are included in pkgsrc -
                   7210: development or beta packages are not really the best thing for most places in
                   7211: which pkgsrc is used. Please use your judgement about what should go into
                   7212: pkgsrc, and bear in mind that stability is to be preferred above new and
                   7213: possibly untested features.
                   7214: 
1.21      snj      7215: 21.6. Renaming a package in pkgsrc
                   7216: 
                   7217: Renaming packages is not recommended.
                   7218: 
                   7219: When renaming packages, be sure to fix any references to old name in other
                   7220: Makefiles, options, buildlink files, etc.
                   7221: 
                   7222: Also When renaming a package, please define SUPERSEDES to the package name and
                   7223: dewey version pattern(s) of the previous package name. This may be repeated for
                   7224: multiple renames. The new package would be an exact replacement.
                   7225: 
                   7226: Note that "successor" in the CHANGES-YYYY file doesn't necessarily mean that it
                   7227: supersedes, as that successor may not be an exact replacement but is a
                   7228: suggestion for the replaced functionality.
                   7229: 
                   7230: 21.7. Moving a package in pkgsrc
                   7231: 
                   7232: It is preferred that packages are not renamed or moved, but if needed please
                   7233: follow these steps.
1.1       dsieger  7234: 
                   7235:  1. Make a copy of the directory somewhere else.
                   7236: 
                   7237:  2. Remove all CVS dirs.
                   7238: 
                   7239:     Alternatively to the first two steps you can also do:
                   7240: 
                   7241:     % cvs -d user@cvs.NetBSD.org:/cvsroot export -D today pkgsrc/category/package
                   7242: 
                   7243:     and use that for further work.
                   7244: 
1.25      wiz      7245:  3. Fix CATEGORIES and any DEPENDS paths that just did "../package" instead of 
1.1       dsieger  7246:     "../../category/package".
                   7247: 
1.21      snj      7248:  4. In the modified package's Makefile, consider setting PREV_PKGPATH to the
                   7249:     previous category/package pathname. The PREV_PKGPATH can be used by tools
                   7250:     for doing an update using pkgsrc building; for example, it can search the
                   7251:     pkg_summary(5) database for PREV_PKGPATH (if no SUPERSEDES) and then use
                   7252:     the corresponding new PKGPATH for that moved package. Note that it may have
                   7253:     multiple matches, so the tool should also check on the PKGBASE too. The
                   7254:     PREV_PKGPATH probably has no value unless SUPERSEDES is not set, i.e.
                   7255:     PKGBASE stays the same.
                   7256: 
                   7257:  5. cvs import the modified package in the new place.
1.1       dsieger  7258: 
1.21      snj      7259:  6. Check if any package depends on it:
1.1       dsieger  7260: 
                   7261:     % cd /usr/pkgsrc
                   7262:     % grep /package */*/Makefile* */*/buildlink*
                   7263: 
1.21      snj      7264:  7. Fix paths in packages from step 5 to point to new location.
1.1       dsieger  7265: 
1.21      snj      7266:  8. cvs rm (-f) the package at the old location.
1.1       dsieger  7267: 
1.21      snj      7268:  9. Remove from oldcategory/Makefile.
1.1       dsieger  7269: 
1.21      snj      7270: 10. Add to newcategory/Makefile.
1.1       dsieger  7271: 
1.21      snj      7272: 11. Commit the changed and removed files:
1.1       dsieger  7273: 
                   7274:     % cvs commit oldcategory/package oldcategory/Makefile newcategory/Makefile
                   7275: 
                   7276:     (and any packages from step 5, of course).
                   7277: 
1.6       rillig   7278: Chapter 22. Frequently Asked Questions
1.1       dsieger  7279: 
                   7280: This section contains the answers to questions that may arise when you are
                   7281: writing a package. If you don't find your question answered here, first have a
                   7282: look in the other chapters, and if you still don't have the answer, ask on the
                   7283: pkgsrc-users mailing list.
                   7284: 
1.6       rillig   7285: 22.1. What is the difference between MAKEFLAGS, .MAKEFLAGS and MAKE_FLAGS?
                   7286: 22.2. What is the difference between MAKE, GMAKE and MAKE_PROGRAM?
                   7287: 22.3. What is the difference between CC, PKG_CC and PKGSRC_COMPILER?
                   7288: 22.4. What is the difference between BUILDLINK_LDFLAGS, BUILDLINK_LDADD and
1.1       dsieger  7289:     BUILDLINK_LIBS?
1.6       rillig   7290: 22.5. Why does make show-var VARNAME=BUILDLINK_PREFIX.foo say it's empty?
                   7291: 22.6. What does ${MASTER_SITE_SOURCEFORGE:=package/} mean? I don't understand
1.1       dsieger  7292:     the := inside it.
1.6       rillig   7293: 22.7. Which mailing lists are there for package developers?
                   7294: 22.8. Where is the pkgsrc documentation?
                   7295: 22.9. I have a little time to kill. What shall I do?
1.1       dsieger  7296: 
1.6       rillig   7297: 22.1. What is the difference between MAKEFLAGS, .MAKEFLAGS and MAKE_FLAGS?
1.1       dsieger  7298: 
                   7299:       MAKEFLAGS are the flags passed to the pkgsrc-internal invocations of make
                   7300:       (1), while MAKE_FLAGS are the flags that are passed to the MAKE_PROGRAM
                   7301:       when building the package. [FIXME: What is .MAKEFLAGS for?]
                   7302: 
1.6       rillig   7303: 22.2. What is the difference between MAKE, GMAKE and MAKE_PROGRAM?
1.1       dsieger  7304: 
                   7305:       MAKE is the path to the make(1) program that is used in the pkgsrc
                   7306:       infrastructure. GMAKE is the path to GNU Make, but you need to say
                   7307:       USE_TOOLS+=gmake to use that. MAKE_PROGRAM is the path to the Make
                   7308:       program that is used for building the package.
                   7309: 
1.6       rillig   7310: 22.3. What is the difference between CC, PKG_CC and PKGSRC_COMPILER?
1.1       dsieger  7311: 
                   7312:       CC is the path to the real C compiler, which can be configured by the
                   7313:       pkgsrc user. PKG_CC is the path to the compiler wrapper. PKGSRC_COMPILER
                   7314:       is not a path to a compiler, but the type of compiler that should be
                   7315:       used. See mk/compiler.mk for more information about the latter variable.
                   7316: 
1.6       rillig   7317: 22.4. What is the difference between BUILDLINK_LDFLAGS, BUILDLINK_LDADD and
1.1       dsieger  7318:       BUILDLINK_LIBS?
                   7319: 
                   7320:       [FIXME]
                   7321: 
1.6       rillig   7322: 22.5. Why does make show-var VARNAME=BUILDLINK_PREFIX.foo say it's empty?
1.1       dsieger  7323: 
1.25      wiz      7324:       For optimization reasons, some variables are only available in the "
                   7325:       wrapper" phase and later. To "simulate" the wrapper phase, append 
1.1       dsieger  7326:       PKG_PHASE=wrapper to the above command.
                   7327: 
1.6       rillig   7328: 22.6. What does ${MASTER_SITE_SOURCEFORGE:=package/} mean? I don't understand
1.1       dsieger  7329:       the := inside it.
                   7330: 
1.108     rillig   7331:       The := is not really an assignment operator, although it looks like it.
                   7332:       Instead, it is a degenerate form of ${LIST:old_string=new_string}, which
                   7333:       is documented in the make(1) man page and which is commonly used in the
                   7334:       form ${SRCS:.c=.o}. In the case of MASTER_SITE_*, old_string is the empty
                   7335:       string and new_string is package/. That's where the : and the = fall
                   7336:       together.
1.1       dsieger  7337: 
1.6       rillig   7338: 22.7. Which mailing lists are there for package developers?
1.1       dsieger  7339: 
                   7340:       tech-pkg
                   7341: 
                   7342:           This is a list for technical discussions related to pkgsrc
                   7343:           development, e.g. soliciting feedback for changes to pkgsrc
                   7344:           infrastructure, proposed new features, questions related to porting
                   7345:           pkgsrc to a new platform, advice for maintaining a package, patches
                   7346:           that affect many packages, help requests moved from pkgsrc-users when
                   7347:           an infrastructure bug is found, etc.
                   7348: 
                   7349:       pkgsrc-bugs
                   7350: 
                   7351:           All bug reports in category "pkg" sent with send-pr(1) appear here.
                   7352:           Please do not report your bugs here directly; use one of the other
                   7353:           mailing lists.
                   7354: 
1.6       rillig   7355: 22.8. Where is the pkgsrc documentation?
1.1       dsieger  7356: 
                   7357:       There are many places where you can find documentation about pkgsrc:
                   7358: 
                   7359:         * The pkgsrc guide (this document) is a collection of chapters that
                   7360:           explain large parts of pkgsrc, but some chapters tend to be outdated.
                   7361:           Which ones they are is hard to say.
                   7362: 
                   7363:         * On the mailing list archives (see http://mail-index.NetBSD.org/), you
                   7364:           can find discussions about certain features, announcements of new
                   7365:           parts of the pkgsrc infrastructure and sometimes even announcements
                   7366:           that a certain feature has been marked as obsolete. The benefit here
                   7367:           is that each message has a date appended to it.
                   7368: 
                   7369:         * Many of the files in the mk/ directory start with a comment that
                   7370:           describes the purpose of the file and how it can be used by the
                   7371:           pkgsrc user and package authors. An easy way to find this
                   7372:           documentation is to run bmake help.
                   7373: 
                   7374:         * The CVS log messages are a rich source of information, but they tend
                   7375:           to be highly abbreviated, especially for actions that occur often.
                   7376:           Some contain a detailed description of what has changed, but they are
                   7377:           geared towards the other pkgsrc developers, not towards an average
                   7378:           pkgsrc user. They also only document changes, so if you don't know
                   7379:           what has been before, these messages may not be worth too much to
                   7380:           you.
                   7381: 
                   7382:         * Some parts of pkgsrc are only "implicitly documented", that is the
                   7383:           documentation exists only in the mind of the developer who wrote the
                   7384:           code. To get this information, use the cvs annotate command to see
                   7385:           who has written it and ask on the tech-pkg mailing list, so that
                   7386:           others can find your questions later (see above). To be sure that the
                   7387:           developer in charge reads the mail, you may CC him or her.
                   7388: 
1.6       rillig   7389: 22.9. I have a little time to kill. What shall I do?
1.1       dsieger  7390: 
                   7391:       This is not really an FAQ yet, but here's the answer anyway.
                   7392: 
                   7393:         * Run pkg_chk -N (from the pkgtools/pkg_chk package). It will tell you
                   7394:           about newer versions of installed packages that are available, but
                   7395:           not yet updated in pkgsrc.
                   7396: 
                   7397:         * Browse pkgsrc/doc/TODO ? it contains a list of suggested new packages
                   7398:           and a list of cleanups and enhancements for pkgsrc that would be nice
                   7399:           to have.
                   7400: 
1.71      wiz      7401:         * Review packages for which review was requested on the tech-pkg
                   7402:           mailing list.
1.1       dsieger  7403: 
1.6       rillig   7404: Chapter 23. GNOME packaging and porting
1.1       dsieger  7405: 
                   7406: Table of Contents
                   7407: 
1.6       rillig   7408: 23.1. Meta packages
                   7409: 23.2. Packaging a GNOME application
                   7410: 23.3. Updating GNOME to a newer version
                   7411: 23.4. Patching guidelines
1.1       dsieger  7412: 
                   7413: Quoting GNOME's web site:
                   7414: 
                   7415:     The GNOME project provides two things: The GNOME desktop environment, an
                   7416:     intuitive and attractive desktop for users, and the GNOME development
                   7417:     platform, an extensive framework for building applications that integrate
                   7418:     into the rest of the desktop.
                   7419: 
                   7420: pkgsrc provides a seamless way to automatically build and install a complete
                   7421: GNOME environment under many different platforms. We can say with confidence
                   7422: that pkgsrc is one of the most advanced build and packaging systems for GNOME
                   7423: due to its included technologies buildlink3, the wrappers and tools framework
                   7424: and automatic configuration file management. Lots of efforts are put into
                   7425: achieving a completely clean deinstallation of installed software components.
                   7426: 
                   7427: Given that pkgsrc is NetBSD's official packaging system, the above also means
                   7428: that great efforts are put into making GNOME work under this operating system.
                   7429: Recently, DragonFly BSD also adopted pkgsrc as its preferred packaging system,
                   7430: contributing lots of portability fixes to make GNOME build and install under
                   7431: it.
                   7432: 
                   7433: This chapter is aimed at pkgsrc developers and other people interested in
                   7434: helping our GNOME porting and packaging efforts. It provides instructions on
                   7435: how to manage the existing packages and some important information regarding
                   7436: their internals.
                   7437: 
                   7438: We need your help!
                   7439: 
                   7440: Should you have some spare cycles to devote to NetBSD, pkgsrc and GNOME and are
                   7441: willing to learn new exciting stuff, please jump straight to the pending work
                   7442: list! There is still a long way to go to get a fully-functional GNOME desktop
                   7443: under NetBSD and we need your help to achieve it!
                   7444: 
1.6       rillig   7445: 23.1. Meta packages
1.1       dsieger  7446: 
                   7447: pkgsrc includes three GNOME-related meta packages:
                   7448: 
                   7449:   * meta-pkgs/gnome-base: Provides the core GNOME desktop environment. It only
                   7450:     includes the necessary bits to get it to boot correctly, although it may
                   7451:     lack important functionality for daily operation. The idea behind this
                   7452:     package is to let end users build their own configurations on top of this
                   7453:     one, first installing this meta package to achieve a functional setup and
                   7454:     then adding individual applications.
                   7455: 
                   7456:   * meta-pkgs/gnome: Provides a complete installation of the GNOME platform and
                   7457:     desktop as defined by the GNOME project; this is based on the components
                   7458:     distributed in the platform/x.y/x.y.z/sources and desktop/x.y/x.y.z/sources
                   7459:     directories of the official FTP server. Developer-only tools found in those
                   7460:     directories are not installed unless required by some other component to
                   7461:     work properly. Similarly, packages from the bindings set (bindings/x.y/
                   7462:     x.y.z/sources) are not pulled in unless required as a dependency for an
                   7463:     end-user component. This package "extends" meta-pkgs/gnome-base.
                   7464: 
                   7465:   * meta-pkgs/gnome-devel: Installs all the tools required to build a GNOME
                   7466:     component when fetched from the CVS repository. These are required to let
                   7467:     the autogen.sh scripts work appropriately.
                   7468: 
                   7469: In all these packages, the DEPENDS lines are sorted in a way that eases
                   7470: updates: a package may depend on other packages listed before it but not on any
1.25      wiz      7471: listed after it. It is very important to keep this order to ease updates so... 
1.1       dsieger  7472: do not change it to alphabetical sorting!
                   7473: 
1.6       rillig   7474: 23.2. Packaging a GNOME application
1.1       dsieger  7475: 
                   7476: Almost all GNOME applications are written in C and use a common set of tools as
                   7477: their build system. Things get different with the new bindings to other
                   7478: languages (such as Python), but the following will give you a general idea on
                   7479: the minimum required tools:
                   7480: 
                   7481:   * Almost all GNOME applications use the GNU Autotools as their build system.
                   7482:     As a general rule you will need to tell this to your package:
                   7483: 
                   7484:     GNU_CONFIGURE=yes
                   7485:     USE_LIBTOOL=yes
                   7486:     USE_TOOLS+=gmake
                   7487: 
                   7488:   * If the package uses pkg-config to detect dependencies, add this tool to the
                   7489:     list of required utilities:
                   7490: 
                   7491:     USE_TOOLS+=pkg-config
                   7492: 
                   7493:     Also use pkgtools/verifypc at the end of the build process to ensure that
                   7494:     you did not miss to specify any dependency in your package and that the
                   7495:     version requirements are all correct.
                   7496: 
                   7497:   * If the package uses intltool, be sure to add intltool to the USE_TOOLS to
                   7498:     handle dependencies and to force the package to use the latest available
                   7499:     version.
                   7500: 
                   7501:   * If the package uses gtk-doc (a documentation generation utility), do not
                   7502:     add a dependency on it. The tool is rather big and the distfile should come
                   7503:     with pregenerated documentation anyway; if it does not, it is a bug that
                   7504:     you ought to report. For such packages you should disable gtk-doc (unless
                   7505:     it is the default):
                   7506: 
                   7507:     CONFIGURE_ARGS+=--disable-gtk-doc
                   7508: 
                   7509:     The default location of installed HTML files (share/gtk-doc/<package-name>)
                   7510:     is correct and should not be changed unless the package insists on
                   7511:     installing them somewhere else. Otherwise programs as devhelp will not be
                   7512:     able to open them. You can do that with an entry similar to:
                   7513: 
                   7514:     CONFIGURE_ARGS+=--with-html-dir=${PREFIX}/share/gtk-doc/...
                   7515: 
                   7516: GNOME uses multiple shared directories and files under the installation prefix
                   7517: to maintain databases. In this context, shared means that those exact same
                   7518: directories and files are used among several different packages, leading to
                   7519: conflicts in the PLIST. pkgsrc currently includes functionality to handle the
                   7520: most common cases, so you have to forget about using @unexec ${RMDIR} lines in
                   7521: your file lists and omitting shared files from them. If you find yourself doing
                   7522: those, your package is most likely incorrect.
                   7523: 
                   7524: The following table lists the common situations that result in using shared
                   7525: directories or files. For each of them, the appropriate solution is given.
1.25      wiz      7526: After applying the solution be sure to regenerate the package's file list with 
1.1       dsieger  7527: make print-PLIST and ensure it is correct.
                   7528: 
1.6       rillig   7529: Table 23.1. PLIST handling for GNOME packages
1.1       dsieger  7530: 
                   7531: +-----------------------------------------------------------------------------+
                   7532: |             If the package...             |             Then...             |
                   7533: |-------------------------------------------+---------------------------------|
1.6       rillig   7534: |                                           |See Section 19.6.10, "Packages   |
1.18      mishka   7535: |Installs OMF files under share/omf.        |installing scrollkeeper/rarian   |
                   7536: |                                           |data files".                     |
1.1       dsieger  7537: |-------------------------------------------+---------------------------------|
1.6       rillig   7538: |Installs icons under the share/icons/      |See Section 19.6.19, "Packages   |
1.1       dsieger  7539: |hicolor hierarchy or updates share/icons/  |installing hicolor theme icons". |
                   7540: |hicolor/icon-theme.cache.                  |                                 |
                   7541: |-------------------------------------------+---------------------------------|
1.6       rillig   7542: |                                           |See Section 19.6.14, "Packages   |
1.1       dsieger  7543: |Installs files under share/mime/packages.  |installing extensions to the MIME|
                   7544: |                                           |database".                       |
                   7545: |-------------------------------------------+---------------------------------|
1.6       rillig   7546: |Installs .desktop files under share/       |See Section 19.6.20, "Packages   |
1.1       dsieger  7547: |applications and these include MIME        |installing desktop files".       |
                   7548: |information.                               |                                 |
                   7549: +-----------------------------------------------------------------------------+
                   7550: 
                   7551: 
1.6       rillig   7552: 23.3. Updating GNOME to a newer version
1.1       dsieger  7553: 
                   7554: When seeing GNOME as a whole, there are two kinds of updates:
                   7555: 
                   7556: Major update
                   7557: 
                   7558:     Given that there is still a very long way for GNOME 3 (if it ever appears),
                   7559:     we consider a major update one that goes from a 2.X version to a 2.Y one,
                   7560:     where Y is even and greater than X. These are hard to achieve because they
                   7561:     introduce lots of changes in the components' code and almost all GNOME
                   7562:     distfiles are updated to newer versions. Some of them can even break API
                   7563:     and ABI compatibility with the previous major version series. As a result,
                   7564:     the update needs to be done all at once to minimize breakage.
                   7565: 
                   7566:     A major update typically consists of around 80 package updates and the
                   7567:     addition of some new ones.
                   7568: 
                   7569: Minor update
                   7570: 
                   7571:     We consider a minor update one that goes from a 2.A.X version to a 2.A.Y
                   7572:     one where Y is greater than X. These are easy to achieve because they do
                   7573:     not update all GNOME components, can be done in an incremental way and do
                   7574:     not break API nor ABI compatibility.
                   7575: 
                   7576:     A minor update typically consists of around 50 package updates, although
                   7577:     the numbers here may vary a lot.
                   7578: 
                   7579: In order to update the GNOME components in pkgsrc to a new stable release
                   7580: (either major or minor), the following steps should be followed:
                   7581: 
                   7582:  1. Get a list of all the tarballs that form the new release by using the
1.19      snj      7583:     following commands. These will leave the full list of the components'
1.1       dsieger  7584:     distfiles into the list.txt file:
                   7585: 
                   7586:     % echo ls "*.tar.bz2" | \
                   7587:         ftp -V ftp://ftp.gnome.org/pub/gnome/platform/x.y/x.y.z/sources/ | \
                   7588:         awk '{ print $9 }' >list.txt
                   7589:     % echo ls "*.tar.bz2" | \
                   7590:         ftp -V ftp://ftp.gnome.org/pub/gnome/desktop/x.y/x.y.z/sources/ | \
                   7591:         awk '{ print $9 }' >>list.txt
                   7592: 
                   7593:  2. Open each meta package's Makefile and bump their version to the release you
                   7594:     are updating them to. The three meta packages should be always consistent
                   7595:     with versioning. Obviously remove any PKGREVISIONs that might be in them.
                   7596: 
                   7597:  3. For each meta package, update all its DEPENDS lines to match the latest
                   7598:     versions as shown by the above commands. Do not list any newer version
                   7599:     (even if found in the FTP) because the meta packages are supposed to list
                   7600:     the exact versions that form a specific GNOME release. Exceptions are
                   7601:     permitted here if a newer version solves a serious issue in the overall
                   7602:     desktop experience; these typically come in the form of a revision bump in
                   7603:     pkgsrc, not in newer versions from the developers.
                   7604: 
                   7605:     Packages not listed in the list.txt file should be updated to the latest
                   7606:     version available (if found in pkgsrc). This is the case, for example, of
                   7607:     the dependencies on the GNU Autotools in the meta-pkgs/gnome-devel meta
                   7608:     package.
                   7609: 
                   7610:  4. Generate a patch from the modified meta packages and extract the list of
                   7611:     "new" lines. This will provide you an outline on what packages need to be
                   7612:     updated in pkgsrc and in what order:
                   7613: 
                   7614:     % cvs diff -u gnome-devel gnome-base gnome | grep '^+D' >todo.txt
                   7615: 
                   7616:  5. For major desktop updates it is recommended to zap all your installed
                   7617:     packages and start over from scratch at this point.
                   7618: 
                   7619:  6. Now comes the longest step by far: iterate over the contents of todo.txt
                   7620:     and update the packages listed in it in order. For major desktop updates
                   7621:     none of these should be committed until the entire set is completed because
                   7622:     there are chances of breaking not-yet-updated packages.
                   7623: 
                   7624:  7. Once the packages are up to date and working, commit them to the tree one
                   7625:     by one with appropriate log messages. At the end, commit the three meta
                   7626:     package updates and all the corresponding changes to the doc/CHANGES-<YEAR>
                   7627:     and pkgsrc/doc/TODO files.
                   7628: 
1.6       rillig   7629: 23.4. Patching guidelines
1.1       dsieger  7630: 
                   7631: GNOME is a very big component in pkgsrc which approaches 100 packages. Please,
                   7632: it is very important that you always, always, always feed back any portability
                   7633: fixes you do to a GNOME package to the mainstream developers (see
1.6       rillig   7634: Section 11.3.5, "Feedback to the author"). This is the only way to get their
1.1       dsieger  7635: attention on portability issues and to ensure that future versions can be built
                   7636: out-of-the box on NetBSD. The less custom patches in pkgsrc, the easier further
                   7637: updates are. Those developers in charge of issuing major GNOME updates will be
                   7638: grateful if you do that.
                   7639: 
                   7640: The most common places to report bugs are the GNOME's Bugzilla and the
                   7641: freedesktop.org's Bugzilla. Not all components use these to track bugs, but
                   7642: most of them do. Do not be short on your reports: always provide detailed
                   7643: explanations of the current failure, how it can be improved to achieve maximum
                   7644: portability and, if at all possible, provide a patch against CVS head. The more
                   7645: verbose you are, the higher chances of your patch being accepted.
                   7646: 
                   7647: Also, please avoid using preprocessor magic to fix portability issues. While
                   7648: the FreeBSD GNOME people are doing a great job in porting GNOME to their
                   7649: operating system, the official GNOME sources are now plagued by conditionals
                   7650: that check for __FreeBSD__ and similar macros. This hurts portability. Please
1.6       rillig   7651: see our patching guidelines (Section 11.3.4, "Patching guidelines") for more
1.1       dsieger  7652: details.
                   7653: 
                   7654: Part III. The pkgsrc infrastructure internals
                   7655: 
                   7656: This part of the guide deals with everything from the infrastructure that is
                   7657: behind the interfaces described in the developer's guide. A casual package
                   7658: maintainer should not need anything from this part.
                   7659: 
                   7660: Table of Contents
                   7661: 
1.6       rillig   7662: 24. Design of the pkgsrc infrastructure
1.1       dsieger  7663: 
1.6       rillig   7664:     24.1. The meaning of variable definitions
                   7665:     24.2. Avoiding problems before they arise
                   7666:     24.3. Variable evaluation
1.1       dsieger  7667: 
1.6       rillig   7668:         24.3.1. At load time
                   7669:         24.3.2. At runtime
1.1       dsieger  7670: 
1.6       rillig   7671:     24.4. How can variables be specified?
                   7672:     24.5. Designing interfaces for Makefile fragments
1.1       dsieger  7673: 
1.6       rillig   7674:         24.5.1. Procedures with parameters
                   7675:         24.5.2. Actions taken on behalf of parameters
1.1       dsieger  7676: 
1.6       rillig   7677:     24.6. The order in which files are loaded
1.1       dsieger  7678: 
1.6       rillig   7679:         24.6.1. The order in bsd.prefs.mk
                   7680:         24.6.2. The order in bsd.pkg.mk
1.1       dsieger  7681: 
1.6       rillig   7682: 25. Regression tests
1.1       dsieger  7683: 
1.108     rillig   7684:     25.1. Running the regression tests
                   7685:     25.2. Adding a new regression test
1.1       dsieger  7686: 
1.108     rillig   7687:         25.2.1. Overridable functions
                   7688:         25.2.2. Helper functions
1.1       dsieger  7689: 
1.6       rillig   7690: 26. Porting pkgsrc
1.1       dsieger  7691: 
1.6       rillig   7692:     26.1. Porting pkgsrc to a new operating system
1.1       dsieger  7693: 
1.6       rillig   7694: Chapter 24. Design of the pkgsrc infrastructure
1.1       dsieger  7695: 
                   7696: Table of Contents
                   7697: 
1.6       rillig   7698: 24.1. The meaning of variable definitions
                   7699: 24.2. Avoiding problems before they arise
                   7700: 24.3. Variable evaluation
1.1       dsieger  7701: 
1.6       rillig   7702:     24.3.1. At load time
                   7703:     24.3.2. At runtime
1.1       dsieger  7704: 
1.6       rillig   7705: 24.4. How can variables be specified?
                   7706: 24.5. Designing interfaces for Makefile fragments
1.1       dsieger  7707: 
1.6       rillig   7708:     24.5.1. Procedures with parameters
                   7709:     24.5.2. Actions taken on behalf of parameters
1.1       dsieger  7710: 
1.6       rillig   7711: 24.6. The order in which files are loaded
1.1       dsieger  7712: 
1.6       rillig   7713:     24.6.1. The order in bsd.prefs.mk
                   7714:     24.6.2. The order in bsd.pkg.mk
1.1       dsieger  7715: 
                   7716: The pkgsrc infrastructure consists of many small Makefile fragments. Each such
                   7717: fragment needs a properly specified interface. This chapter explains how such
                   7718: an interface looks like.
                   7719: 
1.6       rillig   7720: 24.1. The meaning of variable definitions
1.1       dsieger  7721: 
                   7722: Whenever a variable is defined in the pkgsrc infrastructure, the location and
                   7723: the way of definition provide much information about the intended use of that
                   7724: variable. Additionally, more documentation may be found in a header comment or
                   7725: in this pkgsrc guide.
                   7726: 
                   7727: A special file is mk/defaults/mk.conf, which lists all variables that are
                   7728: intended to be user-defined. They are either defined using the ?= operator or
                   7729: they are left undefined because defining them to anything would effectively
                   7730: mean "yes". All these variables may be overridden by the pkgsrc user in the
                   7731: MAKECONF file.
                   7732: 
                   7733: Outside this file, the following conventions apply: Variables that are defined
                   7734: using the ?= operator may be overridden by a package.
                   7735: 
                   7736: Variables that are defined using the = operator may be used read-only at
                   7737: run-time.
                   7738: 
                   7739: Variables whose name starts with an underscore must not be accessed outside the
                   7740: pkgsrc infrastructure at all. They may change without further notice.
                   7741: 
                   7742: Note
                   7743: 
                   7744: These conventions are currently not applied consistently to the complete pkgsrc
                   7745: infrastructure.
                   7746: 
1.6       rillig   7747: 24.2. Avoiding problems before they arise
1.1       dsieger  7748: 
                   7749: All variables that contain lists of things should default to being empty. Two
                   7750: examples that do not follow this rule are USE_LANGUAGES and DISTFILES. These
                   7751: variables cannot simply be modified using the += operator in package Makefiles
                   7752: (or other files included by them), since there is no guarantee whether the
                   7753: variable is already set or not, and what its value is. In the case of
                   7754: DISTFILES, the packages "know" the default value and just define it as in the
                   7755: following example.
                   7756: 
                   7757: DISTFILES=      ${DISTNAME}${EXTRACT_SUFX} additional-files.tar.gz
                   7758: 
                   7759: Because of the selection of this default value, the same value appears in many
                   7760: package Makefiles. Similarly for USE_LANGUAGES, but in this case the default
                   7761: value ("c") is so short that it doesn't stand out. Nevertheless it is mentioned
                   7762: in many files.
                   7763: 
1.6       rillig   7764: 24.3. Variable evaluation
1.1       dsieger  7765: 
1.6       rillig   7766: 24.3.1. At load time
1.1       dsieger  7767: 
                   7768: Variable evaluation takes place either at load time or at runtime, depending on
                   7769: the context in which they occur. The contexts where variables are evaluated at
                   7770: load time are:
                   7771: 
                   7772:   * The right hand side of the := and != operators,
                   7773: 
                   7774:   * Make directives like .if or .for,
                   7775: 
                   7776:   * Dependency lines.
                   7777: 
                   7778: A special exception are references to the iteration variables of .for loops,
                   7779: which are expanded inline, no matter in which context they appear.
                   7780: 
                   7781: As the values of variables may change during load time, care must be taken not
                   7782: to evaluate them by accident. Typical examples for variables that should not be
                   7783: evaluated at load time are DEPENDS and CONFIGURE_ARGS. To make the effect more
                   7784: clear, here is an example:
                   7785: 
                   7786: CONFIGURE_ARGS=         # none
                   7787: CFLAGS=                 -O
                   7788: CONFIGURE_ARGS+=        CFLAGS=${CFLAGS:Q}
                   7789: 
                   7790: CONFIGURE_ARGS:=        ${CONFIGURE_ARGS}
                   7791: 
                   7792: CFLAGS+=                -Wall
                   7793: 
                   7794: This code shows how the use of the := operator can quickly lead to unexpected
                   7795: results. The first paragraph is fairly common code. The second paragraph
                   7796: evaluates the CONFIGURE_ARGS variable, which results in CFLAGS=-O. In the third
                   7797: paragraph, the -Wall is appended to the CFLAGS, but this addition will not
                   7798: appear in CONFIGURE_ARGS. In actual code, the three paragraphs from above
                   7799: typically occur in completely unrelated files.
                   7800: 
1.6       rillig   7801: 24.3.2. At runtime
1.1       dsieger  7802: 
                   7803: After all the files have been loaded, the values of the variables cannot be
                   7804: changed anymore. Variables that are used in the shell commands are expanded at
                   7805: this point.
                   7806: 
1.6       rillig   7807: 24.4. How can variables be specified?
1.1       dsieger  7808: 
                   7809: There are many ways in which the definition and use of a variable can be
                   7810: restricted in order to detect bugs and violations of the (mostly unwritten)
1.108     rillig   7811: policies. A package can be checked with pkglint -Wall to see whether it meets
                   7812: these rules.
1.1       dsieger  7813: 
1.6       rillig   7814: 24.5. Designing interfaces for Makefile fragments
1.1       dsieger  7815: 
                   7816: Most of the .mk files fall into one of the following classes. Cases where a
                   7817: file falls into more than one class should be avoided as it often leads to
                   7818: subtle bugs.
                   7819: 
1.6       rillig   7820: 24.5.1. Procedures with parameters
1.1       dsieger  7821: 
                   7822: In a traditional imperative programming language some of the .mk files could be
1.23      jakllsch 7823: described as procedures. They take some input parameters and?after
                   7824: inclusion?provide a result in output parameters. Since all variables in
                   7825: Makefiles have global scope care must be taken not to use parameter names that
                   7826: have already another meaning. For example, PKGNAME is a bad choice for a
                   7827: parameter name.
1.1       dsieger  7828: 
                   7829: Procedures are completely evaluated at preprocessing time. That is, when
                   7830: calling a procedure all input parameters must be completely resolvable. For
                   7831: example, CONFIGURE_ARGS should never be an input parameter since it is very
                   7832: likely that further text will be added after calling the procedure, which would
                   7833: effectively apply the procedure to only a part of the variable. Also,
1.108     rillig   7834: references to other variables will be modified after calling the procedure.
1.1       dsieger  7835: 
                   7836: A procedure can declare its output parameters either as suitable for use in
                   7837: preprocessing directives or as only available at runtime. The latter
                   7838: alternative is for variables that contain references to other runtime
                   7839: variables.
                   7840: 
                   7841: Procedures shall be written such that it is possible to call the procedure more
                   7842: than once. That is, the file must not contain multiple-inclusion guards.
                   7843: 
                   7844: Examples for procedures are mk/bsd.options.mk and mk/buildlink3/bsd.builtin.mk.
                   7845: To express that the parameters are evaluated at load time, they should be
                   7846: assigned using the := operator, which should be used only for this purpose.
                   7847: 
1.6       rillig   7848: 24.5.2. Actions taken on behalf of parameters
1.1       dsieger  7849: 
                   7850: Action files take some input parameters and may define runtime variables. They
                   7851: shall not define loadtime variables. There are action files that are included
                   7852: implicitly by the pkgsrc infrastructure, while other must be included
                   7853: explicitly.
                   7854: 
                   7855: An example for action files is mk/subst.mk.
                   7856: 
1.6       rillig   7857: 24.6. The order in which files are loaded
1.1       dsieger  7858: 
                   7859: Package Makefiles usually consist of a set of variable definitions, and include
                   7860: the file ../../mk/bsd.pkg.mk in the very last line. Before that, they may also
                   7861: include various other *.mk files if they need to query the availability of
                   7862: certain features like the type of compiler or the X11 implementation. Due to
                   7863: the heavy use of preprocessor directives like .if and .for, the order in which
                   7864: the files are loaded matters.
                   7865: 
                   7866: This section describes at which point the various files are loaded and gives
                   7867: reasons for that order.
                   7868: 
1.6       rillig   7869: 24.6.1. The order in bsd.prefs.mk
1.1       dsieger  7870: 
                   7871: The very first action in bsd.prefs.mk is to define some essential variables
                   7872: like OPSYS, OS_VERSION and MACHINE_ARCH.
                   7873: 
1.4       rillig   7874: Then, the user settings are loaded from the file specified in MAKECONF, which
                   7875: is usually mk.conf. After that, those variables that have not been overridden
                   7876: by the user are loaded from mk/defaults/mk.conf.
1.1       dsieger  7877: 
                   7878: After the user settings, the system settings and platform settings are loaded,
                   7879: which may override the user settings.
                   7880: 
                   7881: Then, the tool definitions are loaded. The tool wrappers are not yet in effect.
                   7882: This only happens when building a package, so the proper variables must be used
                   7883: instead of the direct tool names.
                   7884: 
                   7885: As the last steps, some essential variables from the wrapper and the package
                   7886: system flavor are loaded, as well as the variables that have been cached in
                   7887: earlier phases of a package build.
                   7888: 
1.6       rillig   7889: 24.6.2. The order in bsd.pkg.mk
1.1       dsieger  7890: 
                   7891: First, bsd.prefs.mk is loaded.
                   7892: 
                   7893: Then, the various *-vars.mk files are loaded, which fill default values for
                   7894: those variables that have not been defined by the package. These variables may
                   7895: later be used even in unrelated files.
                   7896: 
                   7897: Then, the file bsd.pkg.error.mk provides the target error-check that is added
                   7898: as a special dependency to all other targets that use DELAYED_ERROR_MSG or
                   7899: DELAYED_WARNING_MSG.
                   7900: 
                   7901: Then, the package-specific hacks from hacks.mk are included.
                   7902: 
                   7903: Then, various other files follow. Most of them don't have any dependencies on
                   7904: what they need to have included before or after them, though some do.
                   7905: 
                   7906: The code to check PKG_FAIL_REASON and PKG_SKIP_REASON is then executed, which
                   7907: restricts the use of these variables to all the files that have been included
                   7908: before. Appearances in later files will be silently ignored.
                   7909: 
                   7910: Then, the files for the main targets are included, in the order of later
                   7911: execution, though the actual order should not matter.
                   7912: 
                   7913: At last, some more files are included that don't set any interesting variables
                   7914: but rather just define make targets to be executed.
                   7915: 
1.6       rillig   7916: Chapter 25. Regression tests
1.1       dsieger  7917: 
                   7918: Table of Contents
                   7919: 
1.108     rillig   7920: 25.1. Running the regression tests
                   7921: 25.2. Adding a new regression test
1.1       dsieger  7922: 
1.108     rillig   7923:     25.2.1. Overridable functions
                   7924:     25.2.2. Helper functions
1.1       dsieger  7925: 
                   7926: The pkgsrc infrastructure consists of a large codebase, and there are many
                   7927: corners where every little bit of a file is well thought out, making pkgsrc
                   7928: likely to fail as soon as anything is changed near those parts. To prevent most
                   7929: changes from breaking anything, a suite of regression tests should go along
                   7930: with every important part of the pkgsrc infrastructure. This chapter describes
                   7931: how regression tests work in pkgsrc and how you can add new tests.
                   7932: 
1.108     rillig   7933: 25.1. Running the regression tests
1.1       dsieger  7934: 
1.25      wiz      7935: You first need to install the pkgtools/pkg_regress package, which provides the 
1.1       dsieger  7936: pkg_regress command. Then you can simply run that command, which will run all
                   7937: tests in the regress category.
                   7938: 
1.108     rillig   7939: 25.2. Adding a new regression test
1.1       dsieger  7940: 
                   7941: Every directory in the regress category that contains a file called spec is
                   7942: considered a regression test. This file is a shell program that is included by
                   7943: the pkg_regress command. The following functions can be overridden to suit your
                   7944: needs.
                   7945: 
1.108     rillig   7946: 25.2.1. Overridable functions
1.1       dsieger  7947: 
1.108     rillig   7948: These functions do not take any parameters. Although they are called in "set -e
                   7949: " mode, they don't stop at the first failing command. See this StackOverflow
                   7950: question for details.
1.1       dsieger  7951: 
1.108     rillig   7952: do_setup
1.1       dsieger  7953: 
                   7954:     This function prepares the environment for the test. By default it does
                   7955:     nothing.
                   7956: 
1.108     rillig   7957: do_test
1.1       dsieger  7958: 
                   7959:     This function runs the actual test. By default, it calls TEST_MAKE with the
                   7960:     arguments MAKEARGS_TEST and writes its output including error messages into
                   7961:     the file TEST_OUTFILE.
                   7962: 
1.108     rillig   7963:     When defining this function, make sure that all output that needs to be
                   7964:     checked is written to the correct output file. Example:
                   7965: 
                   7966:     do_test() {
                   7967:             echo "Example output"
                   7968:     } 1>$TEST_OUTFILE 2>&1
                   7969: 
                   7970: check_result
1.1       dsieger  7971: 
                   7972:     This function is run after the test and is typically used to compare the
                   7973:     actual output from the one that is expected. It can make use of the various
1.108     rillig   7974:     helper functions from the next section. Example:
                   7975: 
                   7976:     check_result() {
                   7977:             exit_status 0
                   7978:             output_require "Example"
                   7979:             output_require "^[[:alpha:]+[[:space:]][[:alpha:]]{6}$"
                   7980:             output_prohibit "no such file or directory"
                   7981:     }
1.1       dsieger  7982: 
1.108     rillig   7983: do_cleanup
1.1       dsieger  7984: 
                   7985:     This function cleans everything up after the test has been run. By default
                   7986:     it does nothing.
                   7987: 
1.108     rillig   7988: 25.2.2. Helper functions
1.1       dsieger  7989: 
1.108     rillig   7990: exit_status expected
1.1       dsieger  7991: 
1.108     rillig   7992:     This function compares the exitcode of the do_test function with its first
                   7993:     parameter. If they differ, the test will fail.
1.1       dsieger  7994: 
1.108     rillig   7995: output_require regex...
1.1       dsieger  7996: 
                   7997:     This function checks for each of its parameters if the output from do_test
1.108     rillig   7998:     matches the extended regular expression. If it does not, the test will
                   7999:     fail. Example:
                   8000: 
                   8001:     output_require "looks fine"
                   8002:     output_require "^[[:alpha:]+[[:space:]][[:alpha:]]{6}$"
1.1       dsieger  8003: 
                   8004: output_prohibit(regex...)
                   8005: 
                   8006:     This function checks for each of its parameters if the output from do_test
                   8007:     () does not match the extended regular expression. If any of the regular
                   8008:     expressions matches, the test will fail.
                   8009: 
1.6       rillig   8010: Chapter 26. Porting pkgsrc
1.1       dsieger  8011: 
                   8012: Table of Contents
                   8013: 
1.6       rillig   8014: 26.1. Porting pkgsrc to a new operating system
1.1       dsieger  8015: 
                   8016: The pkgsrc system has already been ported to many operating systems, hardware
                   8017: architectures and compilers. This chapter explains the necessary steps to make
                   8018: pkgsrc even more portable.
                   8019: 
1.6       rillig   8020: 26.1. Porting pkgsrc to a new operating system
1.1       dsieger  8021: 
                   8022: To port pkgsrc to a new operating system (called MyOS in this example), you
                   8023: need to touch the following files:
                   8024: 
                   8025: pkgtools/bootstrap-mk-files/files/mods/MyOS.sys.mk
                   8026: 
                   8027:     This file contains some basic definitions, for example the name of the C
                   8028:     compiler.
                   8029: 
                   8030: mk/bsd.prefs.mk
                   8031: 
                   8032:     Insert code that defines the variables OPSYS, OS_VERSION, LOWER_OS_VERSION,
                   8033:     LOWER_VENDOR, MACHINE_ARCH, OBJECT_FMT, APPEND_ELF, and the other variables
                   8034:     that appear in this file.
                   8035: 
                   8036: mk/platform/MyOS.mk
                   8037: 
                   8038:     This file contains the platform-specific definitions that are used by
                   8039:     pkgsrc. Start by copying one of the other files and edit it to your needs.
                   8040: 
                   8041: mk/tools/tools.MyOS.mk
                   8042: 
                   8043:     This file defines the paths to all the tools that are needed by one or the
                   8044:     other package in pkgsrc, as well as by pkgsrc itself. Find out where these
                   8045:     tools are on your platform and add them.
                   8046: 
                   8047: Now, you should be able to build some basic packages, like lang/perl5, shells/
                   8048: bash.
                   8049: 
                   8050: Appendix A. A simple example package: bison
                   8051: 
                   8052: Table of Contents
                   8053: 
                   8054: A.1. files
                   8055: 
                   8056:     A.1.1. Makefile
                   8057:     A.1.2. DESCR
                   8058:     A.1.3. PLIST
                   8059:     A.1.4. Checking a package with pkglint
                   8060: 
                   8061: A.2. Steps for building, installing, packaging
                   8062: 
                   8063: We checked to find a piece of software that wasn't in the packages collection,
1.25      wiz      8064: and picked GNU bison. Quite why someone would want to have bison when Berkeley 
1.1       dsieger  8065: yacc is already present in the tree is beyond us, but it's useful for the
                   8066: purposes of this exercise.
                   8067: 
                   8068: A.1. files
                   8069: 
                   8070: A.1.1. Makefile
                   8071: 
1.2       rillig   8072: # $NetBSD$
1.1       dsieger  8073: #
                   8074: 
                   8075: DISTNAME=       bison-1.25
                   8076: CATEGORIES=     devel
                   8077: MASTER_SITES=   ${MASTER_SITE_GNU}
                   8078: 
1.30      dholland 8079: MAINTAINER=     pkgsrc-users@NetBSD.org
1.1       dsieger  8080: HOMEPAGE=       http://www.gnu.org/software/bison/bison.html
                   8081: COMMENT=        GNU yacc clone
                   8082: 
                   8083: GNU_CONFIGURE=  yes
1.47      wiz      8084: INFO_FILES=     yes
1.1       dsieger  8085: 
                   8086: .include "../../mk/bsd.pkg.mk"
                   8087: 
                   8088: A.1.2. DESCR
                   8089: 
                   8090: GNU version of yacc.  Can make re-entrant parsers, and numerous other
                   8091: improvements.  Why you would want this when Berkeley yacc(1) is part
                   8092: of the NetBSD source tree is beyond me.
                   8093: 
                   8094: A.1.3. PLIST
                   8095: 
1.2       rillig   8096: @comment $NetBSD$
1.1       dsieger  8097: bin/bison
                   8098: man/man1/bison.1.gz
                   8099: share/bison.simple
                   8100: share/bison.hairy
                   8101: 
                   8102: A.1.4. Checking a package with pkglint
                   8103: 
                   8104: The NetBSD package system comes with pkgtools/pkglint which helps to check the
                   8105: contents of these files. After installation it is quite easy to use, just
                   8106: change to the directory of the package you wish to examine and execute pkglint:
                   8107: 
                   8108: $ pkglint
                   8109: looks fine.
                   8110: 
                   8111: Depending on the supplied command line arguments (see pkglint(1)), more checks
                   8112: will be performed. Use e.g. pkglint -Call -Wall for a very thorough check.
                   8113: 
                   8114: A.2. Steps for building, installing, packaging
                   8115: 
                   8116: Create the directory where the package lives, plus any auxiliary directories:
                   8117: 
                   8118: # cd /usr/pkgsrc/lang
                   8119: # mkdir bison
                   8120: # cd bison
                   8121: # mkdir patches
                   8122: 
1.6       rillig   8123: Create Makefile, DESCR and PLIST (see Chapter 11, Package components - files,
1.1       dsieger  8124: directories and contents) then continue with fetching the distfile:
                   8125: 
                   8126: # make fetch
                   8127: >> bison-1.25.tar.gz doesn't seem to exist on this system.
                   8128: >> Attempting to fetch from ftp://prep.ai.mit.edu/pub/gnu//.
                   8129: Requesting ftp://prep.ai.mit.edu/pub/gnu//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/)
                   8130: ftp: Error retrieving file: 500 Internal error
                   8131: 
                   8132: >> Attempting to fetch from ftp://wuarchive.wustl.edu/systems/gnu//.
                   8133: Requesting ftp://wuarchive.wustl.edu/systems/gnu//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/)
                   8134: ftp: Error retrieving file: 500 Internal error
                   8135: 
                   8136: >> Attempting to fetch from ftp://ftp.freebsd.org/pub/FreeBSD/distfiles//.
                   8137: Requesting ftp://ftp.freebsd.org/pub/FreeBSD/distfiles//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/)
                   8138: Successfully retrieved file.
                   8139: 
                   8140: Generate the checksum of the distfile into distinfo:
                   8141: 
                   8142: # make makedistinfo
                   8143: 
                   8144: Now compile:
                   8145: 
                   8146: # make
                   8147: >> Checksum OK for bison-1.25.tar.gz.
                   8148: ===>  Extracting for bison-1.25
                   8149: ===>  Patching for bison-1.25
                   8150: ===>   Ignoring empty patch directory
                   8151: ===>  Configuring for bison-1.25
                   8152: creating cache ./config.cache
                   8153: checking for gcc... cc
                   8154: checking whether we are using GNU C... yes
                   8155: checking for a BSD compatible install... /usr/bin/install -c -o bin -g bin
                   8156: checking how to run the C preprocessor... cc -E
                   8157: checking for minix/config.h... no
                   8158: checking for POSIXized ISC... no
                   8159: checking whether cross-compiling... no
                   8160: checking for ANSI C header files... yes
                   8161: checking for string.h... yes
                   8162: checking for stdlib.h... yes
                   8163: checking for memory.h... yes
                   8164: checking for working const... yes
                   8165: checking for working alloca.h... no
                   8166: checking for alloca... yes
                   8167: checking for strerror... yes
                   8168: updating cache ./config.cache
                   8169: creating ./config.status
                   8170: creating Makefile
                   8171: ===>  Building for bison-1.25
                   8172: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g LR0.c
                   8173: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g allocate.c
                   8174: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g closure.c
                   8175: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g conflicts.c
                   8176: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g derives.c
                   8177: cc -c -DXPFILE=\"/usr/pkg/share/bison.simple\"  -DXPFILE1=\"/usr/pkg/share/bison.hairy\" -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1  -g  ./files.c
                   8178: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g getargs.c
                   8179: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g gram.c
                   8180: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g lalr.c
                   8181: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g lex.c
                   8182: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g main.c
                   8183: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g nullable.c
                   8184: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g output.c
                   8185: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g print.c
                   8186: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g reader.c
                   8187: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g reduce.c
                   8188: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g symtab.c
                   8189: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g warshall.c
                   8190: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g version.c
                   8191: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g getopt.c
                   8192: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g getopt1.c
                   8193: cc  -g -o bison LR0.o allocate.o closure.o conflicts.o derives.o files.o         getargs.o gram.o lalr.o lex.o                                   main.o nullable.o output.o print.o reader.o reduce.o symtab.o   warshall.o version.o getopt.o getopt1.o
                   8194: ./files.c:240: warning: mktemp() possibly used unsafely, consider using mkstemp()
                   8195: rm -f bison.s1
                   8196: sed -e "/^#line/ s|bison|/usr/pkg/share/bison|" < ./bison.simple > bison.s1
                   8197: 
                   8198: Everything seems OK, so install the files:
                   8199: 
                   8200: # make install
                   8201: >> Checksum OK for bison-1.25.tar.gz.
                   8202: ===>  Installing for bison-1.25
                   8203: sh ./mkinstalldirs /usr/pkg/bin /usr/pkg/share  /usr/pkg/info /usr/pkg/man/man1
                   8204: rm -f /usr/pkg/bin/bison
                   8205: cd /usr/pkg/share; rm -f bison.simple bison.hairy
                   8206: rm -f /usr/pkg/man/man1/bison.1 /usr/pkg/info/bison.info*
                   8207: install -c  -o bin -g bin -m 555 bison /usr/pkg/bin/bison
                   8208: /usr/bin/install -c -o bin -g bin -m 644 bison.s1 /usr/pkg/share/bison.simple
                   8209: /usr/bin/install -c -o bin -g bin -m 644 ./bison.hairy /usr/pkg/share/bison.hairy
                   8210: cd .; for f in bison.info*;  do /usr/bin/install -c -o bin -g bin -m 644 $f /usr/pkg/info/$f; done
                   8211: /usr/bin/install -c -o bin -g bin -m 644 ./bison.1 /usr/pkg/man/man1/bison.1
                   8212: ===>  Registering installation for bison-1.25
                   8213: 
                   8214: You can now use bison, and also - if you decide so - remove it with pkg_delete
                   8215: bison. Should you decide that you want a binary package, do this now:
                   8216: 
                   8217: # make package
                   8218: >> Checksum OK for bison-1.25.tar.gz.
                   8219: ===>  Building package for bison-1.25
                   8220: Creating package bison-1.25.tgz
                   8221: Registering depends:.
                   8222: Creating gzip'd tar ball in '/u/pkgsrc/lang/bison/bison-1.25.tgz'
                   8223: 
                   8224: Now that you don't need the source and object files any more, clean up:
                   8225: 
                   8226: # make clean
                   8227: ===>  Cleaning for bison-1.25
                   8228: 
                   8229: Appendix B. Build logs
                   8230: 
                   8231: Table of Contents
                   8232: 
                   8233: B.1. Building figlet
                   8234: B.2. Packaging figlet
                   8235: 
                   8236: B.1. Building figlet
                   8237: 
                   8238: # make
                   8239: ===> Checking for vulnerabilities in figlet-2.2.1nb2
                   8240: => figlet221.tar.gz doesn't seem to exist on this system.
                   8241: => Attempting to fetch figlet221.tar.gz from ftp://ftp.figlet.org/pub/figlet/program/unix/.
                   8242: => [172219 bytes]
                   8243: Connected to ftp.plig.net.
                   8244: 220 ftp.plig.org NcFTPd Server (licensed copy) ready.
                   8245: 331 Guest login ok, send your complete e-mail address as password.
                   8246: 230-You are user #5 of 500 simultaneous users allowed.
                   8247: 230-
                   8248: 230-  ___ _             _ _
                   8249: 230- |  _| |_ ___   ___| |_|___   ___ ___ ___
                   8250: 230- |  _|  _| . |_| . | | | . |_| . |  _| . |
                   8251: 230- |_| |_| |  _|_|  _|_|_|_  |_|___|_| |_  |
                   8252: 230-         |_|   |_|     |___|         |___|
                   8253: 230-
                   8254: 230-** Welcome to ftp.plig.org **
                   8255: 230-
                   8256: 230-Please note that all transfers from this FTP site are logged. If you
                   8257: 230-do not like this, please disconnect now.
                   8258: 230-
1.19      snj      8259: 230-This archive is available via
1.1       dsieger  8260: 230-
                   8261: 230-HTTP:  http://ftp.plig.org/
                   8262: 230-FTP:   ftp://ftp.plig.org/     (max 500 connections)
                   8263: 230-RSYNC: rsync://ftp.plig.org/   (max  30 connections)
                   8264: 230-
                   8265: 230-Please email comments, bug reports and requests for packages to be
                   8266: 230-mirrored to ftp-admin@plig.org.
                   8267: 230-
                   8268: 230-
                   8269: 230 Logged in anonymously.
                   8270: Remote system type is UNIX.
                   8271: Using binary mode to transfer files.
                   8272: 200 Type okay.
                   8273: 250 "/pub" is new cwd.
                   8274: 250-"/pub/figlet" is new cwd.
                   8275: 250-
                   8276: 250-Welcome to the figlet archive at ftp.figlet.org
                   8277: 250-
                   8278: 250-    ftp://ftp.figlet.org/pub/figlet/
                   8279: 250-
                   8280: 250-The official FIGlet web page is:
                   8281: 250-    http://www.figlet.org/
                   8282: 250-
                   8283: 250-If you have questions, please mailto:info@figlet.org. If you want to
                   8284: 250-contribute a font or something else, you can email us.
                   8285: 250
                   8286: 250 "/pub/figlet/program" is new cwd.
                   8287: 250 "/pub/figlet/program/unix" is new cwd.
                   8288: local: figlet221.tar.gz remote: figlet221.tar.gz
                   8289: 502 Unimplemented command.
                   8290: 227 Entering Passive Mode (195,40,6,41,246,104)
                   8291: 150 Data connection accepted from 84.128.86.72:65131; transfer starting for figlet221.tar.gz (172219 bytes).
                   8292: 38% |**************                       | 65800      64.16 KB/s    00:01 ETA
                   8293: 226 Transfer completed.
                   8294: 172219 bytes received in 00:02 (75.99 KB/s)
                   8295: 221 Goodbye.
                   8296: => Checksum OK for figlet221.tar.gz.
                   8297: ===> Extracting for figlet-2.2.1nb2
                   8298: ===> Required installed package ccache-[0-9]*: ccache-2.3nb1 found
                   8299: ===> Patching for figlet-2.2.1nb2
                   8300: ===> Applying pkgsrc patches for figlet-2.2.1nb2
                   8301: ===> Overriding tools for figlet-2.2.1nb2
                   8302: ===> Creating toolchain wrappers for figlet-2.2.1nb2
                   8303: ===> Configuring for figlet-2.2.1nb2
                   8304: ===> Building for figlet-2.2.1nb2
                   8305: gcc -O2 -DDEFAULTFONTDIR=\"/usr/pkg/share/figlet\"  -DDEFAULTFONTFILE=\"standard.flf\"  figlet.c zipio.c crc.c inflate.c -o figlet
                   8306: chmod a+x figlet
                   8307: gcc -O2 -o chkfont chkfont.c
                   8308: => Unwrapping files-to-be-installed.
                   8309: #
                   8310: # make install
                   8311: ===> Checking for vulnerabilities in figlet-2.2.1nb2
                   8312: ===> Installing for figlet-2.2.1nb2
                   8313: install -d -o root -g wheel -m 755 /usr/pkg/bin
                   8314: install -d -o root -g wheel -m 755 /usr/pkg/man/man6
                   8315: mkdir -p /usr/pkg/share/figlet
                   8316: cp figlet /usr/pkg/bin
                   8317: cp chkfont /usr/pkg/bin
                   8318: chmod 555 figlist showfigfonts
                   8319: cp figlist /usr/pkg/bin
                   8320: cp showfigfonts /usr/pkg/bin
                   8321: cp fonts/*.flf /usr/pkg/share/figlet
                   8322: cp fonts/*.flc /usr/pkg/share/figlet
                   8323: cp figlet.6 /usr/pkg/man/man6
                   8324: ===> Registering installation for figlet-2.2.1nb2
                   8325: #
                   8326: 
                   8327: B.2. Packaging figlet
                   8328: 
                   8329: # make package
                   8330: ===> Checking for vulnerabilities in figlet-2.2.1nb2
                   8331: ===> Packaging figlet-2.2.1nb2
                   8332: ===> Building binary package for figlet-2.2.1nb2
                   8333: Creating package /home/cvs/pkgsrc/packages/i386/All/figlet-2.2.1nb2.tgz
                   8334: Using SrcDir value of /usr/pkg
                   8335: Registering depends:.
                   8336: #
                   8337: 
                   8338: Appendix C. Directory layout of the pkgsrc FTP server
                   8339: 
                   8340: Table of Contents
                   8341: 
1.23      jakllsch 8342: C.1. distfiles: The distributed source files
                   8343: C.2. misc: Miscellaneous things
                   8344: C.3. packages: Binary packages
                   8345: C.4. reports: Bulk build reports
                   8346: C.5. current, pkgsrc-20xxQy: source packages
1.1       dsieger  8347: 
                   8348: As in other big projects, the directory layout of pkgsrc is quite complex for
                   8349: newbies. This chapter explains where you find things on the FTP server. The
                   8350: base directory on ftp.NetBSD.org is /pub/pkgsrc/. On other servers it may be
                   8351: different, but inside this directory, everything should look the same, no
                   8352: matter on which server you are. This directory contains some subdirectories,
                   8353: which are explained below.
                   8354: 
1.23      jakllsch 8355: C.1. distfiles: The distributed source files
1.1       dsieger  8356: 
                   8357: The directory distfiles contains lots of archive files from all pkgsrc
                   8358: packages, which are mirrored here. The subdirectories are called after their
                   8359: package names and are used when the distributed files have names that don't
                   8360: explicitly contain a version number or are otherwise too generic (for example
                   8361: release.tar.gz).
                   8362: 
1.23      jakllsch 8363: C.2. misc: Miscellaneous things
1.1       dsieger  8364: 
                   8365: This directory contains things that individual pkgsrc developers find worth
                   8366: publishing.
                   8367: 
1.23      jakllsch 8368: C.3. packages: Binary packages
1.1       dsieger  8369: 
1.3       rillig   8370: This directory contains binary packages for the various platforms that are
                   8371: supported by pkgsrc. Each subdirectory is of the form OPSYS/ARCH/OSVERSION_TAG.
                   8372: The meaning of these variables is:
                   8373: 
                   8374:   * OPSYS is the name of the operating system for which the packages have been
1.9       rillig   8375:     built. The name is taken from the output of the uname command, so it may
                   8376:     differ from the one you are used to hear.
1.3       rillig   8377: 
1.8       rillig   8378:   * ARCH is the hardware architecture of the platform for which the packages
1.10      hubertf  8379:     have been built. It also includes the ABI (Application Binary Interface)
                   8380:     for platforms that have several of them.
1.3       rillig   8381: 
1.8       rillig   8382:   * OSVERSION is the version of the operating system. For version numbers that
                   8383:     change often (for example NetBSD-current), the often-changing part should
                   8384:     be replaced with an x, for example 4.99.x.
1.3       rillig   8385: 
1.23      jakllsch 8386:   * TAG is either 20xxQy for a stable branch, or head for packages built from
1.8       rillig   8387:     the HEAD branch. The latter should only be used when the packages are
                   8388:     updated on a regular basis. Otherwise the date from checking out pkgsrc
                   8389:     should be appended, for example head_20071015.
1.3       rillig   8390: 
                   8391: The rationale for exactly this scheme is that the pkgsrc users looking for
                   8392: binary packages can quickly click through the directories on the server and
                   8393: find the best binary packages for their machines. Since they usually know the
                   8394: operating system and the hardware architecture, OPSYS and ARCH are placed
                   8395: first. After these choices, they can select the best combination of OSVERSION
                   8396: and TAG together, since it is usually the case that packages stay compatible
                   8397: between different version of the operating system.
                   8398: 
                   8399: In each of these directories, there is a whole binary packages collection for a
                   8400: specific platform. It has a directory called All which contains all binary
                   8401: packages. Besides that, there are various category directories that contain
                   8402: symbolic links to the real binary packages.
1.1       dsieger  8403: 
1.23      jakllsch 8404: C.4. reports: Bulk build reports
1.8       rillig   8405: 
                   8406: Here are the reports from bulk builds, for those who want to fix packages that
                   8407: didn't build on some of the platforms. The structure of subdirectories should
1.23      jakllsch 8408: look like the one in Section C.3, "packages: Binary packages".
1.8       rillig   8409: 
1.23      jakllsch 8410: C.5. current, pkgsrc-20xxQy: source packages
1.1       dsieger  8411: 
                   8412: These directories contain the "real" pkgsrc, that is the files that define how
                   8413: to create binary packages from source archives.
                   8414: 
                   8415: The directory pkgsrc contains a snapshot of the CVS repository, which is
                   8416: updated regularly. The file pkgsrc.tar.gz contains the same as the directory,
                   8417: ready to be downloaded as a whole.
                   8418: 
                   8419: In the directories for the quarterly branches, there is an additional file
1.23      jakllsch 8420: called pkgsrc-20xxQy.tar.gz, which contains the state of pkgsrc when it was
1.1       dsieger  8421: branched.
                   8422: 
                   8423: Appendix D. Editing guidelines for the pkgsrc guide
                   8424: 
                   8425: Table of Contents
                   8426: 
                   8427: D.1. Make targets
                   8428: D.2. Procedure
                   8429: 
                   8430: This section contains information on editing the pkgsrc guide itself.
                   8431: 
                   8432: D.1. Make targets
                   8433: 
                   8434: The pkgsrc guide's source code is stored in pkgsrc/doc/guide/files, and several
                   8435: files are created from it:
                   8436: 
                   8437:   * pkgsrc/doc/pkgsrc.txt
                   8438: 
                   8439:   * pkgsrc/doc/pkgsrc.html
                   8440: 
1.2       rillig   8441:   * http://www.NetBSD.org/docs/pkgsrc/
1.1       dsieger  8442: 
1.2       rillig   8443:   * http://www.NetBSD.org/docs/pkgsrc/pkgsrc.pdf: The PDF version of the pkgsrc
                   8444:     guide.
1.1       dsieger  8445: 
1.2       rillig   8446:   * http://www.NetBSD.org/docs/pkgsrc/pkgsrc.ps: PostScript version of the
                   8447:     pkgsrc guide.
1.1       dsieger  8448: 
                   8449: D.2. Procedure
                   8450: 
                   8451: The procedure to edit the pkgsrc guide is:
                   8452: 
                   8453:  1. Make sure you have the packages needed to regenerate the pkgsrc guide (and
1.46      obache   8454:     other XML-based NetBSD documentation) installed. These are automatically
                   8455:     installed when you install the meta-pkgs/pkgsrc-guide-tools package.
1.1       dsieger  8456: 
                   8457:  2. Run cd doc/guide to get to the right directory. All further steps will take
                   8458:     place here.
                   8459: 
                   8460:  3. Edit the XML file(s) in files/.
                   8461: 
                   8462:  4. Run bmake to check the pkgsrc guide for valid XML and to build the final
                   8463:     output files. If you get any errors at this stage, you can just edit the
                   8464:     files, as there are only symbolic links in the working directory, pointing
                   8465:     to the files in files/.
                   8466: 
                   8467:  5. (cd files && cvs commit)
                   8468: 
                   8469:  6. Run bmake clean && bmake to regenerate the output files with the proper RCS
                   8470:     Ids.
                   8471: 
                   8472:  7. Run bmake regen to install and commit the files in both pkgsrc/doc and
                   8473:     htdocs.
                   8474: 
                   8475:     Note
                   8476: 
                   8477:     If you have added, removed or renamed some chapters, you need to
                   8478:     synchronize them using cvs add or cvs delete in the htdocs directory.
                   8479: 

CVSweb <webmaster@jp.NetBSD.org>