Annotation of htdocs/docs/pkgsrc/pkgsrc.txt, revision 1.121

1.1       dsieger     1: The pkgsrc guide
                      2: 
                      3: Documentation on the NetBSD packages system
                      4: 
                      5: Alistair Crooks
                      6: 
                      7: <agc@NetBSD.org>
                      8: 
                      9: Hubert Feyrer
                     10: 
                     11: <hubertf@NetBSD.org>
                     12: 
                     13: The pkgsrc Developers
                     14: 
1.107     jnemeth    15: Copyright   1994-2016 The NetBSD Foundation, Inc
1.1       dsieger    16: 
1.108     rillig     17: $NetBSD: pkgsrc.xml,v 1.30 2016/06/11 18:14:42 rillig Exp $
1.1       dsieger    18: 
                     19: Abstract
                     20: 
                     21: pkgsrc is a centralized package management system for Unix-like operating
                     22: systems. This guide provides information for users and developers of pkgsrc. It
                     23: covers installation of binary and source packages, creation of binary and
                     24: source packages and a high-level overview about the infrastructure.
                     25: 
                     26: -------------------------------------------------------------------------------
                     27: 
                     28: Table of Contents
                     29: 
                     30: 1. What is pkgsrc?
                     31: 
                     32:     1.1. Introduction
                     33: 
                     34:         1.1.1. Why pkgsrc?
                     35:         1.1.2. Supported platforms
                     36: 
                     37:     1.2. Overview
                     38:     1.3. Terminology
                     39: 
                     40:         1.3.1. Roles involved in pkgsrc
                     41: 
                     42:     1.4. Typography
                     43: 
                     44: I. The pkgsrc user's guide
                     45: 
                     46:     2. Where to get pkgsrc and how to keep it up-to-date
                     47: 
                     48:         2.1. Getting pkgsrc for the first time
                     49: 
1.52      asau       50:             2.1.1. As tar archive
1.24      wiz        51:             2.1.2. Via anonymous CVS
1.1       dsieger    52: 
                     53:         2.2. Keeping pkgsrc up-to-date
                     54: 
                     55:             2.2.1. Via tar files
                     56:             2.2.2. Via CVS
                     57: 
                     58:     3. Using pkgsrc on systems other than NetBSD
                     59: 
                     60:         3.1. Binary distribution
                     61:         3.2. Bootstrapping pkgsrc
                     62: 
                     63:     4. Using pkgsrc
                     64: 
                     65:         4.1. Using binary packages
                     66: 
                     67:             4.1.1. Finding binary packages
                     68:             4.1.2. Installing binary packages
                     69:             4.1.3. Deinstalling packages
                     70:             4.1.4. Getting information about installed packages
                     71:             4.1.5. Checking for security vulnerabilities in installed packages
                     72:             4.1.6. Finding if newer versions of your installed packages are in
                     73:                 pkgsrc
                     74:             4.1.7. Other administrative functions
                     75: 
                     76:         4.2. Building packages from source
                     77: 
                     78:             4.2.1. Requirements
                     79:             4.2.2. Fetching distfiles
                     80:             4.2.3. How to build and install
                     81: 
                     82:     5. Configuring pkgsrc
                     83: 
                     84:         5.1. General configuration
                     85:         5.2. Variables affecting the build process
1.9       rillig     86:         5.3. Variables affecting the installation process
1.4       rillig     87:         5.4. Selecting and configuring the compiler
1.1       dsieger    88: 
1.4       rillig     89:             5.4.1. Selecting the compiler
                     90:             5.4.2. Additional flags to the compiler (CFLAGS)
                     91:             5.4.3. Additional flags to the linker (LDFLAGS)
1.1       dsieger    92: 
1.4       rillig     93:         5.5. Developer/advanced settings
                     94:         5.6. Selecting Build Options
1.1       dsieger    95: 
                     96:     6. Creating binary packages
                     97: 
                     98:         6.1. Building a single binary package
                     99:         6.2. Settings for creation of binary packages
                    100: 
1.6       rillig    101:     7. Creating binary packages for everything in pkgsrc (bulk builds)
                    102: 
1.71      wiz       103:         7.1. Preparations
                    104:         7.2. Running a pbulk-style bulk build
1.6       rillig    105: 
1.71      wiz       106:             7.2.1. Configuration
1.6       rillig    107: 
1.71      wiz       108:         7.3. Requirements of a full bulk build
1.66      asau      109:         7.4. Creating a multiple CD-ROM packages collection
1.6       rillig    110: 
1.66      asau      111:             7.4.1. Example of cdpack
1.6       rillig    112: 
                    113:     8. Directory layout of the installed files
                    114: 
                    115:         8.1. File system layout in ${LOCALBASE}
                    116:         8.2. File system layout in ${VARBASE}
                    117: 
                    118:     9. Frequently Asked Questions
                    119: 
                    120:         9.1. Are there any mailing lists for pkg-related discussion?
1.84      wiz       121:         9.2. Utilities for package management (pkgtools)
                    122:         9.3. How to use pkgsrc as non-root
                    123:         9.4. How to resume transfers when fetching distfiles?
                    124:         9.5. How can I install/use modular X.org from pkgsrc?
                    125:         9.6. How to fetch files from behind a firewall
                    126:         9.7. How to fetch files from HTTPS sites
                    127:         9.8. How do I tell make fetch to do passive FTP?
                    128:         9.9. How to fetch all distfiles at once
                    129:         9.10. What does "Don't know how to make /usr/share/tmac/tmac.andoc"
1.24      wiz       130:             mean?
1.84      wiz       131:         9.11. What does "Could not find bsd.own.mk" mean?
                    132:         9.12. Using 'sudo' with pkgsrc
                    133:         9.13. How do I change the location of configuration files?
                    134:         9.14. Automated security checks
                    135:         9.15. Why do some packages ignore my CFLAGS?
                    136:         9.16. A package does not build. What shall I do?
                    137:         9.17. What does "Makefile appears to contain unresolved cvs/rcs/???
1.24      wiz       138:             merge conflicts" mean?
1.1       dsieger   139: 
                    140: II. The pkgsrc developer's guide
                    141: 
1.6       rillig    142:     10. Creating a new pkgsrc package from scratch
1.1       dsieger   143: 
1.6       rillig    144:         10.1. Common types of packages
1.1       dsieger   145: 
1.6       rillig    146:             10.1.1. Perl modules
1.121   ! sevan     147:             10.1.2. KDE3 & KDE4 applications
1.17      imil      148:             10.1.3. Python modules and programs
1.1       dsieger   149: 
1.6       rillig    150:         10.2. Examples
1.1       dsieger   151: 
1.6       rillig    152:             10.2.1. How the www/nvu package came into pkgsrc
1.1       dsieger   153: 
1.6       rillig    154:     11. Package components - files, directories and contents
1.1       dsieger   155: 
1.6       rillig    156:         11.1. Makefile
                    157:         11.2. distinfo
                    158:         11.3. patches/*
1.1       dsieger   159: 
1.6       rillig    160:             11.3.1. Structure of a single patch file
                    161:             11.3.2. Creating patch files
                    162:             11.3.3. Sources where the patch files come from
                    163:             11.3.4. Patching guidelines
                    164:             11.3.5. Feedback to the author
1.1       dsieger   165: 
1.6       rillig    166:         11.4. Other mandatory files
                    167:         11.5. Optional files
1.1       dsieger   168: 
1.6       rillig    169:             11.5.1. Files affecting the binary package
                    170:             11.5.2. Files affecting the build process
                    171:             11.5.3. Files affecting nothing at all
1.1       dsieger   172: 
1.6       rillig    173:         11.6. work*
                    174:         11.7. files/*
1.1       dsieger   175: 
1.6       rillig    176:     12. Programming in Makefiles
1.1       dsieger   177: 
1.6       rillig    178:         12.1. Caveats
                    179:         12.2. Makefile variables
1.1       dsieger   180: 
1.6       rillig    181:             12.2.1. Naming conventions
1.1       dsieger   182: 
1.6       rillig    183:         12.3. Code snippets
1.1       dsieger   184: 
1.6       rillig    185:             12.3.1. Adding things to a list
1.117     sevan     186:             12.3.2. Echoing a string exactly as-is
1.108     rillig    187:             12.3.3. Passing CFLAGS to GNU configure scripts
                    188:             12.3.4. Handling possibly empty variables
1.1       dsieger   189: 
1.6       rillig    190:     13. PLIST issues
1.1       dsieger   191: 
1.6       rillig    192:         13.1. RCS ID
                    193:         13.2. Semi-automatic PLIST generation
                    194:         13.3. Tweaking output of make print-PLIST
                    195:         13.4. Variable substitution in PLIST
                    196:         13.5. Man page compression
                    197:         13.6. Changing PLIST source with PLIST_SRC
                    198:         13.7. Platform-specific and differing PLISTs
1.86      wiz       199:         13.8. Build-specific PLISTs
                    200:         13.9. Sharing directories between packages
1.1       dsieger   201: 
1.6       rillig    202:     14. Buildlink methodology
1.1       dsieger   203: 
1.6       rillig    204:         14.1. Converting packages to use buildlink3
                    205:         14.2. Writing buildlink3.mk files
1.1       dsieger   206: 
1.6       rillig    207:             14.2.1. Anatomy of a buildlink3.mk file
1.27      wiz       208:             14.2.2. Updating BUILDLINK_API_DEPENDS.pkg and
                    209:                 BUILDLINK_ABI_DEPENDS.pkg in buildlink3.mk files
1.1       dsieger   210: 
1.6       rillig    211:         14.3. Writing builtin.mk files
1.1       dsieger   212: 
1.6       rillig    213:             14.3.1. Anatomy of a builtin.mk file
                    214:             14.3.2. Global preferences for native or pkgsrc software
1.1       dsieger   215: 
1.6       rillig    216:     15. The pkginstall framework
1.1       dsieger   217: 
1.6       rillig    218:         15.1. Files and directories outside the installation prefix
1.1       dsieger   219: 
1.6       rillig    220:             15.1.1. Directory manipulation
                    221:             15.1.2. File manipulation
1.1       dsieger   222: 
1.6       rillig    223:         15.2. Configuration files
1.1       dsieger   224: 
1.6       rillig    225:             15.2.1. How PKG_SYSCONFDIR is set
                    226:             15.2.2. Telling the software where configuration files are
                    227:             15.2.3. Patching installations
                    228:             15.2.4. Disabling handling of configuration files
1.1       dsieger   229: 
1.6       rillig    230:         15.3. System startup scripts
1.1       dsieger   231: 
1.6       rillig    232:             15.3.1. Disabling handling of system startup scripts
1.1       dsieger   233: 
1.6       rillig    234:         15.4. System users and groups
                    235:         15.5. System shells
1.1       dsieger   236: 
1.6       rillig    237:             15.5.1. Disabling shell registration
1.1       dsieger   238: 
1.6       rillig    239:         15.6. Fonts
1.1       dsieger   240: 
1.6       rillig    241:             15.6.1. Disabling automatic update of the fonts databases
1.1       dsieger   242: 
1.6       rillig    243:     16. Options handling
1.1       dsieger   244: 
1.6       rillig    245:         16.1. Global default options
                    246:         16.2. Converting packages to use bsd.options.mk
                    247:         16.3. Option Names
1.7       rillig    248:         16.4. Determining the options of dependencies
1.1       dsieger   249: 
1.6       rillig    250:     17. The build process
1.1       dsieger   251: 
1.6       rillig    252:         17.1. Introduction
                    253:         17.2. Program location
                    254:         17.3. Directories used during the build process
                    255:         17.4. Running a phase
                    256:         17.5. The fetch phase
1.1       dsieger   257: 
1.6       rillig    258:             17.5.1. What to fetch and where to get it from
                    259:             17.5.2. How are the files fetched?
1.1       dsieger   260: 
1.6       rillig    261:         17.6. The checksum phase
                    262:         17.7. The extract phase
                    263:         17.8. The patch phase
                    264:         17.9. The tools phase
                    265:         17.10. The wrapper phase
                    266:         17.11. The configure phase
                    267:         17.12. The build phase
                    268:         17.13. The test phase
                    269:         17.14. The install phase
                    270:         17.15. The package phase
                    271:         17.16. Cleaning up
                    272:         17.17. Other helpful targets
1.1       dsieger   273: 
1.6       rillig    274:     18. Tools needed for building or running
1.1       dsieger   275: 
1.6       rillig    276:         18.1. Tools for pkgsrc builds
                    277:         18.2. Tools needed by packages
                    278:         18.3. Tools provided by platforms
1.1       dsieger   279: 
1.6       rillig    280:     19. Making your package work
1.1       dsieger   281: 
1.6       rillig    282:         19.1. General operation
1.1       dsieger   283: 
1.108     rillig    284:             19.1.1. How to pull in user-settable variables from mk.conf
                    285:             19.1.2. User interaction
                    286:             19.1.3. Handling licenses
                    287:             19.1.4. Restricted packages
                    288:             19.1.5. Handling dependencies
                    289:             19.1.6. Handling conflicts with other packages
                    290:             19.1.7. Packages that cannot or should not be built
                    291:             19.1.8. Packages which should not be deleted, once installed
                    292:             19.1.9. Handling packages with security problems
                    293:             19.1.10. How to handle incrementing versions when fixing an
1.1       dsieger   294:                 existing package
1.108     rillig    295:             19.1.11. Substituting variable text in the package files (the SUBST
1.1       dsieger   296:                 framework)
                    297: 
1.108     rillig    298:         19.2. The fetch phase
1.1       dsieger   299: 
1.6       rillig    300:             19.2.1. Packages whose distfiles aren't available for plain
1.1       dsieger   301:                 downloading
1.6       rillig    302:             19.2.2. How to handle modified distfiles with the 'old' name
1.88      tnn       303:             19.2.3. Packages hosted on github.com
1.1       dsieger   304: 
1.108     rillig    305:         19.3. The configure phase
1.1       dsieger   306: 
1.6       rillig    307:             19.3.1. Shared libraries - libtool
                    308:             19.3.2. Using libtool on GNU packages that already support libtool
                    309:             19.3.3. GNU Autoconf/Automake
                    310: 
                    311:         19.4. Programming languages
                    312: 
                    313:             19.4.1. C, C++, and Fortran
                    314:             19.4.2. Java
                    315:             19.4.3. Packages containing perl scripts
1.41      wiz       316:             19.4.4. Packages containing shell scripts
                    317:             19.4.5. Other programming languages
1.6       rillig    318: 
1.108     rillig    319:         19.5. The build phase
1.6       rillig    320: 
                    321:             19.5.1. Compiling C and C++ code conditionally
                    322:             19.5.2. How to handle compiler bugs
1.24      wiz       323:             19.5.3. Undefined reference to "..."
1.6       rillig    324:             19.5.4. Running out of memory
                    325: 
1.108     rillig    326:         19.6. The install phase
1.6       rillig    327: 
                    328:             19.6.1. Creating needed directories
                    329:             19.6.2. Where to install documentation
                    330:             19.6.3. Installing highscore files
                    331:             19.6.4. Adding DESTDIR support to packages
                    332:             19.6.5. Packages with hardcoded paths to other interpreters
                    333:             19.6.6. Packages installing perl modules
                    334:             19.6.7. Packages installing info files
                    335:             19.6.8. Packages installing man pages
1.7       rillig    336:             19.6.9. Packages installing GConf data files
1.18      mishka    337:             19.6.10. Packages installing scrollkeeper/rarian data files
1.6       rillig    338:             19.6.11. Packages installing X11 fonts
                    339:             19.6.12. Packages installing GTK2 modules
                    340:             19.6.13. Packages installing SGML or XML data
                    341:             19.6.14. Packages installing extensions to the MIME database
                    342:             19.6.15. Packages using intltool
                    343:             19.6.16. Packages installing startup scripts
                    344:             19.6.17. Packages installing TeX modules
                    345:             19.6.18. Packages supporting running binaries in emulation
                    346:             19.6.19. Packages installing hicolor theme icons
                    347:             19.6.20. Packages installing desktop files
                    348: 
                    349:         19.7. Marking packages as having problems
                    350: 
                    351:     20. Debugging
                    352:     21. Submitting and Committing
                    353: 
                    354:         21.1. Submitting binary packages
                    355:         21.2. Submitting source packages (for non-NetBSD-developers)
                    356:         21.3. General notes when adding, updating, or removing packages
1.34      wiz       357:         21.4. Committing: Adding a package to CVS
1.6       rillig    358:         21.5. Updating a package to a newer version
1.21      snj       359:         21.6. Renaming a package in pkgsrc
                    360:         21.7. Moving a package in pkgsrc
1.6       rillig    361: 
                    362:     22. Frequently Asked Questions
                    363:     23. GNOME packaging and porting
                    364: 
                    365:         23.1. Meta packages
                    366:         23.2. Packaging a GNOME application
                    367:         23.3. Updating GNOME to a newer version
                    368:         23.4. Patching guidelines
1.1       dsieger   369: 
                    370: III. The pkgsrc infrastructure internals
                    371: 
1.6       rillig    372:     24. Design of the pkgsrc infrastructure
1.1       dsieger   373: 
1.6       rillig    374:         24.1. The meaning of variable definitions
                    375:         24.2. Avoiding problems before they arise
                    376:         24.3. Variable evaluation
1.1       dsieger   377: 
1.6       rillig    378:             24.3.1. At load time
                    379:             24.3.2. At runtime
1.1       dsieger   380: 
1.6       rillig    381:         24.4. How can variables be specified?
                    382:         24.5. Designing interfaces for Makefile fragments
1.1       dsieger   383: 
1.6       rillig    384:             24.5.1. Procedures with parameters
                    385:             24.5.2. Actions taken on behalf of parameters
1.1       dsieger   386: 
1.6       rillig    387:         24.6. The order in which files are loaded
1.1       dsieger   388: 
1.6       rillig    389:             24.6.1. The order in bsd.prefs.mk
                    390:             24.6.2. The order in bsd.pkg.mk
1.1       dsieger   391: 
1.6       rillig    392:     25. Regression tests
1.1       dsieger   393: 
1.108     rillig    394:         25.1. Running the regression tests
                    395:         25.2. Adding a new regression test
1.1       dsieger   396: 
1.108     rillig    397:             25.2.1. Overridable functions
                    398:             25.2.2. Helper functions
1.1       dsieger   399: 
1.6       rillig    400:     26. Porting pkgsrc
1.1       dsieger   401: 
1.6       rillig    402:         26.1. Porting pkgsrc to a new operating system
1.1       dsieger   403: 
                    404: A. A simple example package: bison
                    405: 
                    406:     A.1. files
                    407: 
                    408:         A.1.1. Makefile
                    409:         A.1.2. DESCR
                    410:         A.1.3. PLIST
                    411:         A.1.4. Checking a package with pkglint
                    412: 
                    413:     A.2. Steps for building, installing, packaging
                    414: 
                    415: B. Build logs
                    416: 
                    417:     B.1. Building figlet
                    418:     B.2. Packaging figlet
                    419: 
                    420: C. Directory layout of the pkgsrc FTP server
                    421: 
1.23      jakllsch  422:     C.1. distfiles: The distributed source files
                    423:     C.2. misc: Miscellaneous things
                    424:     C.3. packages: Binary packages
                    425:     C.4. reports: Bulk build reports
                    426:     C.5. current, pkgsrc-20xxQy: source packages
1.1       dsieger   427: 
                    428: D. Editing guidelines for the pkgsrc guide
                    429: 
                    430:     D.1. Make targets
                    431:     D.2. Procedure
                    432: 
                    433: List of Tables
                    434: 
                    435: 1.1. Platforms supported by pkgsrc
1.6       rillig    436: 11.1. Patching examples
                    437: 23.1. PLIST handling for GNOME packages
1.1       dsieger   438: 
                    439: Chapter 1. What is pkgsrc?
                    440: 
                    441: Table of Contents
                    442: 
                    443: 1.1. Introduction
                    444: 
                    445:     1.1.1. Why pkgsrc?
                    446:     1.1.2. Supported platforms
                    447: 
                    448: 1.2. Overview
                    449: 1.3. Terminology
                    450: 
                    451:     1.3.1. Roles involved in pkgsrc
                    452: 
                    453: 1.4. Typography
                    454: 
                    455: 1.1. Introduction
                    456: 
                    457: There is a lot of software freely available for Unix-based systems, which is
                    458: usually available in form of the source code. Before such software can be used,
                    459: it needs to be configured to the local system, compiled and installed, and this
                    460: is exactly what The NetBSD Packages Collection (pkgsrc) does. pkgsrc also has
                    461: some basic commands to handle binary packages, so that not every user has to
                    462: build the packages for himself, which is a time-costly task.
                    463: 
                    464: pkgsrc currently contains several thousand packages, including:
                    465: 
1.104     sevan     466:   * www/apache24 - The Apache web server
1.1       dsieger   467: 
                    468:   * www/firefox - The Firefox web browser
                    469: 
                    470:   * meta-pkgs/gnome - The GNOME Desktop Environment
                    471: 
1.102     ryoon     472:   * meta-pkgs/kde4 - The K Desktop Environment
1.1       dsieger   473: 
1.108     rillig    474: ? just to name a few.
1.1       dsieger   475: 
                    476: pkgsrc has built-in support for handling varying dependencies, such as pthreads
                    477: and X11, and extended features such as IPv6 support on a range of platforms.
                    478: 
                    479: 1.1.1. Why pkgsrc?
                    480: 
                    481: pkgsrc provides the following key features:
                    482: 
                    483:   * Easy building of software from source as well as the creation and
                    484:     installation of binary packages. The source and latest patches are
                    485:     retrieved from a master or mirror download site, checksum verified, then
                    486:     built on your system. Support for binary-only distributions is available
                    487:     for both native platforms and NetBSD emulated platforms.
                    488: 
                    489:   * All packages are installed in a consistent directory tree, including
                    490:     binaries, libraries, man pages and other documentation.
                    491: 
1.104     sevan     492:   * Tracking of package dependencies automatically, including when performing
                    493:     updates, to ensure required packages are installed. The configuration files
                    494:     of various packages are handled automatically during updates, so local
                    495:     changes are preserved.
1.1       dsieger   496: 
                    497:   * Like NetBSD, pkgsrc is designed with portability in mind and consists of
                    498:     highly portable code. This allows the greatest speed of development when
1.26      spz       499:     porting to a new platform. This portability also ensures that pkgsrc is 
1.1       dsieger   500:     consistent across all platforms.
                    501: 
                    502:   * The installation prefix, acceptable software licenses, international
                    503:     encryption requirements and build-time options for a large number of
                    504:     packages are all set in a simple, central configuration file.
                    505: 
                    506:   * The entire source (not including the distribution files) is freely
                    507:     available under a BSD license, so you may extend and adapt pkgsrc to your
                    508:     needs. Support for local packages and patches is available right out of the
                    509:     box, so you can configure it specifically for your environment.
                    510: 
                    511: The following principles are basic to pkgsrc:
                    512: 
                    513:   * "It should only work if it's right." ? That means, if a package contains
                    514:     bugs, it's better to find them and to complain about them rather than to
                    515:     just install the package and hope that it works. There are numerous checks
                    516:     in pkgsrc that try to find such bugs: Static analysis tools (pkgtools/
                    517:     pkglint), build-time checks (portability of shell scripts), and
                    518:     post-installation checks (installed files, references to shared libraries,
                    519:     script interpreters).
                    520: 
                    521:   * "If it works, it should work everywhere" ? Like NetBSD has been ported to
                    522:     many hardware architectures, pkgsrc has been ported to many operating
                    523:     systems. Care is taken that packages behave the same on all platforms.
                    524: 
                    525: 1.1.2. Supported platforms
                    526: 
                    527: pkgsrc consists of both a source distribution and a binary distribution for
                    528: these operating systems. After retrieving the required source or binaries, you
                    529: can be up and running with pkgsrc in just minutes!
                    530: 
                    531: pkgsrc was derived from FreeBSD's ports system, and initially developed for
                    532: NetBSD only. Since then, pkgsrc has grown a lot, and now supports the following
                    533: platforms:
                    534: 
                    535: Table 1.1. Platforms supported by pkgsrc
                    536: 
1.92      sevan     537: +-----------------------------------------------------------------------------+
                    538: |               Platform               | Date Support  |        Notes         |
                    539: |                                      |     Added     |                      |
                    540: |--------------------------------------+---------------+----------------------|
                    541: |NetBSD                                |   Aug 1997    |                      |
                    542: |--------------------------------------+---------------+----------------------|
                    543: |Solaris                               |   Mar 1999    |README.Solaris        |
                    544: |--------------------------------------+---------------+----------------------|
                    545: |Linux                                 |   Jun 1999    |README.Linux          |
                    546: |--------------------------------------+---------------+----------------------|
1.118     sevan     547: |Darwin / Mac OS X / OS X / macOS      |   Oct 2001    |README.MacOSX         |
1.92      sevan     548: |--------------------------------------+---------------+----------------------|
                    549: |FreeBSD                               |   Nov 2002    |README.FreeBSD        |
                    550: |--------------------------------------+---------------+----------------------|
                    551: |OpenBSD                               |   Nov 2002    |README.OpenBSD        |
                    552: |--------------------------------------+---------------+----------------------|
                    553: |IRIX                                  |   Dec 2002    |README.IRIX           |
                    554: |                                      |               |README.IRIX5.3        |
                    555: |--------------------------------------+---------------+----------------------|
                    556: |BSD/OS                                |   Dec 2003    |                      |
                    557: |--------------------------------------+---------------+----------------------|
                    558: |AIX                                   |   Dec 2003    |README.AIX            |
                    559: |--------------------------------------+---------------+----------------------|
                    560: |Interix (Microsoft Windows Services   |   Mar 2004    |README.Interix        |
                    561: |for Unix)                             |               |                      |
                    562: |--------------------------------------+---------------+----------------------|
                    563: |DragonFlyBSD                          |   Oct 2004    |                      |
                    564: |--------------------------------------+---------------+----------------------|
                    565: |OSF/1                                 |   Nov 2004    |README.OSF1           |
                    566: |--------------------------------------+---------------+----------------------|
                    567: |HP-UX                                 |   Apr 2007    |README.HPUX           |
                    568: |--------------------------------------+---------------+----------------------|
                    569: |Haiku                                 |   Sep 2010    |README.Haiku          |
                    570: |--------------------------------------+---------------+----------------------|
                    571: |MirBSD                                |   Jan 2011    |                      |
                    572: |--------------------------------------+---------------+----------------------|
                    573: |Minix3                                |   Nov 2011    |README.Minix3         |
                    574: |--------------------------------------+---------------+----------------------|
                    575: |Cygwin                                |   Mar 2013    |README.Cygwin         |
                    576: |--------------------------------------+---------------+----------------------|
                    577: |GNU/kFreeBSD                          |   Jul 2013    |README.GNUkFreeBSD    |
1.104     sevan     578: |--------------------------------------+---------------+----------------------|
                    579: |Bitrig                                |   Jun 2014    |README.Bitrig         |
1.92      sevan     580: +-----------------------------------------------------------------------------+
1.1       dsieger   581: 
                    582: 
                    583: 1.2. Overview
                    584: 
                    585: This document is divided into three parts. The first, The pkgsrc user's guide,
                    586: describes how one can use one of the packages in the Package Collection, either
                    587: by installing a precompiled binary package, or by building one's own copy using
                    588: the NetBSD package system. The second part, The pkgsrc developer's guide,
                    589: explains how to prepare a package so it can be easily built by other NetBSD
                    590: users without knowing about the package's building details. The third part, The
                    591: pkgsrc infrastructure internals is intended for those who want to understand
                    592: how pkgsrc is implemented.
                    593: 
                    594: This document is available in various formats: HTML, PDF, PS, TXT.
                    595: 
                    596: 1.3. Terminology
                    597: 
                    598: There has been a lot of talk about "ports", "packages", etc. so far. Here is a
                    599: description of all the terminology used within this document.
                    600: 
                    601: Package
                    602: 
                    603:     A set of files and building instructions that describe what's necessary to
                    604:     build a certain piece of software using pkgsrc. Packages are traditionally
                    605:     stored under /usr/pkgsrc.
                    606: 
                    607: The NetBSD package system
                    608: 
                    609:     This is the former name of "pkgsrc". It is part of the NetBSD operating
                    610:     system and can be bootstrapped to run on non-NetBSD operating systems as
                    611:     well. It handles building (compiling), installing, and removing of
                    612:     packages.
                    613: 
                    614: Distfile
                    615: 
                    616:     This term describes the file or files that are provided by the author of
                    617:     the piece of software to distribute his work. All the changes necessary to
                    618:     build on NetBSD are reflected in the corresponding package. Usually the
                    619:     distfile is in the form of a compressed tar-archive, but other types are
                    620:     possible, too. Distfiles are usually stored below /usr/pkgsrc/distfiles.
                    621: 
                    622: Port
                    623: 
                    624:     This is the term used by FreeBSD and OpenBSD people for what we call a
                    625:     package. In NetBSD terminology, "port" refers to a different architecture.
                    626: 
                    627: Precompiled/binary package
                    628: 
                    629:     A set of binaries built with pkgsrc from a distfile and stuffed together in
                    630:     a single .tgz file so it can be installed on machines of the same machine
                    631:     architecture without the need to recompile. Packages are usually generated
                    632:     in /usr/pkgsrc/packages; there is also an archive on ftp.NetBSD.org.
                    633: 
                    634:     Sometimes, this is referred to by the term "package" too, especially in the
                    635:     context of precompiled packages.
                    636: 
                    637: Program
                    638: 
                    639:     The piece of software to be installed which will be constructed from all
                    640:     the files in the distfile by the actions defined in the corresponding
                    641:     package.
                    642: 
                    643: 1.3.1. Roles involved in pkgsrc
                    644: 
                    645: pkgsrc users
                    646: 
                    647:     The pkgsrc users are people who use the packages provided by pkgsrc.
                    648:     Typically they are system administrators. The people using the software
                    649:     that is inside the packages (maybe called "end users") are not covered by
                    650:     the pkgsrc guide.
                    651: 
                    652:     There are two kinds of pkgsrc users: Some only want to install pre-built
                    653:     binary packages. Others build the pkgsrc packages from source, either for
                    654:     installing them directly or for building binary packages themselves. For
                    655:     pkgsrc users Part I, "The pkgsrc user's guide" should provide all necessary
                    656:     documentation.
                    657: 
                    658: package maintainers
                    659: 
                    660:     A package maintainer creates packages as described in Part II, "The pkgsrc
                    661:     developer's guide".
                    662: 
                    663: infrastructure developers
                    664: 
                    665:     These people are involved in all those files that live in the mk/ directory
                    666:     and below. Only these people should need to read through Part III, "The
                    667:     pkgsrc infrastructure internals", though others might be curious, too.
                    668: 
                    669: 1.4. Typography
                    670: 
                    671: When giving examples for commands, shell prompts are used to show if the
                    672: command should/can be issued as root, or if "normal" user privileges are
1.115     sevan     673: sufficient. We use a # for root's shell prompt, a % for users' shell prompt,
                    674: assuming they use the C-shell or tcsh and a $ for bourne shell and derivatives.
1.1       dsieger   675: 
                    676: Part I. The pkgsrc user's guide
                    677: 
                    678: Table of Contents
                    679: 
                    680: 2. Where to get pkgsrc and how to keep it up-to-date
                    681: 
                    682:     2.1. Getting pkgsrc for the first time
                    683: 
1.52      asau      684:         2.1.1. As tar archive
1.24      wiz       685:         2.1.2. Via anonymous CVS
1.1       dsieger   686: 
                    687:     2.2. Keeping pkgsrc up-to-date
                    688: 
                    689:         2.2.1. Via tar files
                    690:         2.2.2. Via CVS
                    691: 
                    692: 3. Using pkgsrc on systems other than NetBSD
                    693: 
                    694:     3.1. Binary distribution
                    695:     3.2. Bootstrapping pkgsrc
                    696: 
                    697: 4. Using pkgsrc
                    698: 
                    699:     4.1. Using binary packages
                    700: 
                    701:         4.1.1. Finding binary packages
                    702:         4.1.2. Installing binary packages
                    703:         4.1.3. Deinstalling packages
                    704:         4.1.4. Getting information about installed packages
                    705:         4.1.5. Checking for security vulnerabilities in installed packages
                    706:         4.1.6. Finding if newer versions of your installed packages are in
                    707:             pkgsrc
                    708:         4.1.7. Other administrative functions
                    709: 
                    710:     4.2. Building packages from source
                    711: 
                    712:         4.2.1. Requirements
                    713:         4.2.2. Fetching distfiles
                    714:         4.2.3. How to build and install
                    715: 
                    716: 5. Configuring pkgsrc
                    717: 
                    718:     5.1. General configuration
                    719:     5.2. Variables affecting the build process
1.9       rillig    720:     5.3. Variables affecting the installation process
1.4       rillig    721:     5.4. Selecting and configuring the compiler
1.1       dsieger   722: 
1.4       rillig    723:         5.4.1. Selecting the compiler
                    724:         5.4.2. Additional flags to the compiler (CFLAGS)
                    725:         5.4.3. Additional flags to the linker (LDFLAGS)
1.1       dsieger   726: 
1.4       rillig    727:     5.5. Developer/advanced settings
                    728:     5.6. Selecting Build Options
1.1       dsieger   729: 
                    730: 6. Creating binary packages
                    731: 
                    732:     6.1. Building a single binary package
                    733:     6.2. Settings for creation of binary packages
                    734: 
1.6       rillig    735: 7. Creating binary packages for everything in pkgsrc (bulk builds)
                    736: 
1.71      wiz       737:     7.1. Preparations
                    738:     7.2. Running a pbulk-style bulk build
1.6       rillig    739: 
1.71      wiz       740:         7.2.1. Configuration
1.6       rillig    741: 
1.71      wiz       742:     7.3. Requirements of a full bulk build
1.66      asau      743:     7.4. Creating a multiple CD-ROM packages collection
1.6       rillig    744: 
1.66      asau      745:         7.4.1. Example of cdpack
1.6       rillig    746: 
                    747: 8. Directory layout of the installed files
                    748: 
                    749:     8.1. File system layout in ${LOCALBASE}
                    750:     8.2. File system layout in ${VARBASE}
                    751: 
                    752: 9. Frequently Asked Questions
                    753: 
                    754:     9.1. Are there any mailing lists for pkg-related discussion?
1.84      wiz       755:     9.2. Utilities for package management (pkgtools)
                    756:     9.3. How to use pkgsrc as non-root
                    757:     9.4. How to resume transfers when fetching distfiles?
                    758:     9.5. How can I install/use modular X.org from pkgsrc?
                    759:     9.6. How to fetch files from behind a firewall
                    760:     9.7. How to fetch files from HTTPS sites
                    761:     9.8. How do I tell make fetch to do passive FTP?
                    762:     9.9. How to fetch all distfiles at once
                    763:     9.10. What does "Don't know how to make /usr/share/tmac/tmac.andoc" mean?
                    764:     9.11. What does "Could not find bsd.own.mk" mean?
                    765:     9.12. Using 'sudo' with pkgsrc
                    766:     9.13. How do I change the location of configuration files?
                    767:     9.14. Automated security checks
                    768:     9.15. Why do some packages ignore my CFLAGS?
                    769:     9.16. A package does not build. What shall I do?
                    770:     9.17. What does "Makefile appears to contain unresolved cvs/rcs/??? merge
1.24      wiz       771:         conflicts" mean?
1.1       dsieger   772: 
                    773: Chapter 2. Where to get pkgsrc and how to keep it up-to-date
                    774: 
                    775: Table of Contents
                    776: 
                    777: 2.1. Getting pkgsrc for the first time
                    778: 
1.52      asau      779:     2.1.1. As tar archive
1.24      wiz       780:     2.1.2. Via anonymous CVS
1.1       dsieger   781: 
                    782: 2.2. Keeping pkgsrc up-to-date
                    783: 
                    784:     2.2.1. Via tar files
                    785:     2.2.2. Via CVS
                    786: 
                    787: Before you download and extract the files, you need to decide where you want to
                    788: extract them. When using pkgsrc as root user, pkgsrc is usually installed in /
                    789: usr/pkgsrc. You are though free to install the sources and binary packages
                    790: wherever you want in your filesystem, provided that the pathname does not
                    791: contain white-space or other characters that are interpreted specially by the
                    792: shell and some other programs. A safe bet is to use only letters, digits,
                    793: underscores and dashes.
                    794: 
                    795: 2.1. Getting pkgsrc for the first time
                    796: 
1.25      wiz       797: Before you download any pkgsrc files, you should decide whether you want the 
1.1       dsieger   798: current branch or the stable branch. The latter is forked on a quarterly basis
                    799: from the current branch and only gets modified for security updates. The names
                    800: of the stable branches are built from the year and the quarter, for example
1.118     sevan     801: 2016Q4.
1.1       dsieger   802: 
                    803: The second step is to decide how you want to download pkgsrc. You can get it as
1.24      wiz       804: a tar file or via CVS. Both ways are described here.
1.1       dsieger   805: 
1.52      asau      806: Note that tar archive contains CVS working copy. Thus you can switch to using
                    807: CVS at any later time.
1.1       dsieger   808: 
1.52      asau      809: 2.1.1. As tar archive
                    810: 
                    811: The primary download location for all pkgsrc files is http://ftp.NetBSD.org/pub
                    812: /pkgsrc/ or ftp://ftp.NetBSD.org/pub/pkgsrc/ (it points to the same location).
                    813: There are a number of subdirectories for different purposes, which are
1.1       dsieger   814: described in detail in Appendix C, Directory layout of the pkgsrc FTP server.
                    815: 
1.52      asau      816: The tar archive for the current branch is in the directory current and is
1.118     sevan     817: called pkgsrc.tar.gz. It is autogenerated weekly.
1.52      asau      818: 
                    819: To save download time we provide bzip2- and xz-compressed archives which are
                    820: published at pkgsrc.tar.bz2 and pkgsrc.tar.xz respectively.
                    821: 
                    822: You can fetch the same files using FTP.
1.1       dsieger   823: 
1.118     sevan     824: The tar file for the stable branch 2016Q4 is in the directory pkgsrc-2016Q4 and
1.59      jnemeth   825: is also called pkgsrc.tar.gz.
1.1       dsieger   826: 
1.12      weinem    827: To download a pkgsrc stable tarball, run:
                    828: 
1.59      jnemeth   829: $ ftp ftp://ftp.NetBSD.org/pub/pkgsrc/pkgsrc-20xxQy/pkgsrc.tar.gz
1.12      weinem    830: 
1.25      wiz       831: Where pkgsrc-20xxQy is the stable branch to be downloaded, for example, "
1.118     sevan     832: pkgsrc-2016Q4".
1.12      weinem    833: 
1.78      snj       834: If you prefer, you can also fetch it using "wget", "curl", or your web browser.
1.52      asau      835: 
1.12      weinem    836: Then, extract it with:
                    837: 
1.78      snj       838: $ tar -xzf pkgsrc.tar.gz -C /usr
1.12      weinem    839: 
                    840: This will create the directory pkgsrc/ in /usr/ and all the package source will
                    841: be stored under /usr/pkgsrc/.
                    842: 
                    843: To download pkgsrc-current, run:
                    844: 
                    845: $ ftp ftp://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc.tar.gz
1.1       dsieger   846: 
1.24      wiz       847: 2.1.2. Via anonymous CVS
1.1       dsieger   848: 
1.24      wiz       849: To fetch a specific pkgsrc stable branch, run:
1.1       dsieger   850: 
1.40      wiz       851: $ cd /usr && cvs -q -z2 -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -r pkgsrc-20xxQy -P pkgsrc
1.1       dsieger   852: 
1.25      wiz       853: Where pkgsrc-20xxQy is the stable branch to be checked out, for example, "
1.118     sevan     854: pkgsrc-2016Q4"
1.13      weinem    855: 
1.24      wiz       856: This will create the directory pkgsrc/ in your /usr/ directory and all the
                    857: package source will be stored under /usr/pkgsrc/.
                    858: 
                    859: To fetch the pkgsrc current branch, run:
1.1       dsieger   860: 
1.40      wiz       861: $ cd /usr && cvs -q -z2 -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -P pkgsrc
1.1       dsieger   862: 
1.30      dholland  863: Refer to the list of available mirrors to choose a faster CVS mirror, if
                    864: needed.
1.1       dsieger   865: 
1.24      wiz       866: If you get error messages from rsh, you need to set CVS_RSH variable. E.g.:
1.1       dsieger   867: 
1.40      wiz       868: $ cd /usr && env CVS_RSH=ssh cvs -q -z2 -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -P pkgsrc
1.1       dsieger   869: 
1.24      wiz       870: Refer to documentation on your command shell how to set CVS_RSH=ssh
                    871: permanently. For Bourne shells, you can set it in your .profile or better
                    872: globally in /etc/profile:
                    873: 
                    874: # set CVS remote shell command
                    875: CVS_RSH=ssh
                    876: export CVS_RSH
1.12      weinem    877: 
1.13      weinem    878: By default, CVS doesn't do things like most people would expect it to do. But
                    879: there is a way to convince CVS, by creating a file called .cvsrc in your home
1.12      weinem    880: directory and saving the following lines to it. This file will save you lots of
                    881: headache and some bug reports, so we strongly recommend it. You can find an
                    882: explanation of this file in the CVS documentation.
1.2       rillig    883: 
                    884: # recommended CVS configuration file from the pkgsrc guide
1.40      wiz       885: cvs -q -z2
1.2       rillig    886: checkout -P
1.4       rillig    887: update -dP
                    888: diff -upN
1.2       rillig    889: rdiff -u
1.24      wiz       890: release -d
1.1       dsieger   891: 
                    892: 2.2. Keeping pkgsrc up-to-date
                    893: 
                    894: The preferred way to keep pkgsrc up-to-date is via CVS (which also works if you
                    895: have first installed it via a tar file). It saves bandwidth and hard disk
                    896: activity, compared to downloading the tar file again.
                    897: 
                    898: 2.2.1. Via tar files
                    899: 
                    900: Warning
                    901: 
                    902: When updating from a tar file, you first need to completely remove the old
                    903: pkgsrc directory. Otherwise those files that have been removed from pkgsrc in
                    904: the mean time will not be removed on your local disk, resulting in
                    905: inconsistencies. When removing the old files, any changes that you have done to
                    906: the pkgsrc files will be lost after updating. Therefore updating via CVS is
                    907: strongly recommended.
                    908: 
                    909: Note that by default the distfiles and the binary packages are saved in the
                    910: pkgsrc tree, so don't forget to rescue them before updating. You can also
1.78      snj       911: configure pkgsrc to store distfiles and packages in directories outside the
                    912: pkgsrc tree by setting the DISTDIR and PACKAGES variables. See Chapter 5, 
                    913: Configuring pkgsrc for the details.
1.1       dsieger   914: 
                    915: To update pkgsrc from a tar file, download the tar file as explained above.
                    916: Then, make sure that you have not made any changes to the files in the pkgsrc
                    917: directory. Remove the pkgsrc directory and extract the new tar file. Done.
                    918: 
                    919: 2.2.2. Via CVS
                    920: 
1.26      spz       921: To update pkgsrc via CVS, change to the pkgsrc directory and run cvs:
1.12      weinem    922: 
1.26      spz       923: $ cd /usr/pkgsrc && cvs update -dP
                    924: 
                    925: If you get error messages from rsh, you need to set CVS_RSH variable as
                    926: described above. E.g.:
                    927: 
                    928: $ cd /usr/pkgsrc && env CVS_RSH=ssh cvs up -dP
1.1       dsieger   929: 
                    930: 2.2.2.1. Switching between different pkgsrc branches
                    931: 
                    932: When updating pkgsrc, the CVS program keeps track of the branch you selected.
                    933: But if you, for whatever reason, want to switch from the stable branch to the
                    934: current one, you can do it by adding the option "-A" after the "update"
1.25      wiz       935: keyword. To switch from the current branch back to the stable branch, add the "
1.118     sevan     936: -rpkgsrc-2016Q4" option.
1.1       dsieger   937: 
                    938: 2.2.2.2. What happens to my changes when updating?
                    939: 
                    940: When you update pkgsrc, the CVS program will only touch those files that are
                    941: registered in the CVS repository. That means that any packages that you created
                    942: on your own will stay unmodified. If you change files that are managed by CVS,
                    943: later updates will try to merge your changes with those that have been done by
                    944: others. See the CVS manual, chapter "update" for details.
                    945: 
                    946: Chapter 3. Using pkgsrc on systems other than NetBSD
                    947: 
                    948: Table of Contents
                    949: 
                    950: 3.1. Binary distribution
                    951: 3.2. Bootstrapping pkgsrc
                    952: 
                    953: 3.1. Binary distribution
                    954: 
1.9       rillig    955: See Section 4.1, "Using binary packages".
1.1       dsieger   956: 
                    957: 3.2. Bootstrapping pkgsrc
                    958: 
1.44      asau      959: pkgsrc can be bootstrapped for use in two different modes: privileged and
                    960: unprivileged one. In unprivileged mode in contrast to privileged one all
1.45      asau      961: programs are installed under one particular user and cannot utilise privileged
1.44      asau      962: operations (packages don't create special users and all special file
                    963: permissions like setuid are ignored).
                    964: 
1.1       dsieger   965: Installing the bootstrap kit from source should be as simple as:
                    966: 
1.60      asau      967: # env CVS_RSH=ssh cvs -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -P pkgsrc
1.1       dsieger   968: # cd pkgsrc/bootstrap
                    969: # ./bootstrap
                    970: 
                    971: 
1.44      asau      972: To bootstrap in unprivileged mode pass "--unprivileged" flag to bootstrap
                    973: 
                    974: By default, in privileged mode pkgsrc uses /usr/pkg for prefix where programs
1.118     sevan     975: will be installed in, and /usr/pkg/pkgdb for the package database directory
                    976: where pkgsrc will do its internal bookkeeping, /var is used as varbase, where
1.44      asau      977: packages install their persistent data. In unprivileged mode pkgsrc uses ~/pkg
1.118     sevan     978: for prefix, ~/pkg/pkgdb for the package database, and ~/pkg/var for varbase.
1.44      asau      979: 
                    980: You can change default layout using command-line arguments. Run "./bootstrap
                    981: --help" to get details.
1.1       dsieger   982: 
                    983: Note
                    984: 
                    985: The bootstrap installs a bmake tool. Use this bmake when building via pkgsrc.
                    986: For examples in this guide, use bmake instead of "make".
                    987: 
1.44      asau      988: Note
                    989: 
                    990: It is possible to bootstrap multiple instances of pkgsrc using non-intersecting
                    991: directories. Use bmake corresponding to the installation you're working with to
                    992: build and install packages.
                    993: 
1.1       dsieger   994: Chapter 4. Using pkgsrc
                    995: 
                    996: Table of Contents
                    997: 
                    998: 4.1. Using binary packages
                    999: 
                   1000:     4.1.1. Finding binary packages
                   1001:     4.1.2. Installing binary packages
                   1002:     4.1.3. Deinstalling packages
                   1003:     4.1.4. Getting information about installed packages
                   1004:     4.1.5. Checking for security vulnerabilities in installed packages
                   1005:     4.1.6. Finding if newer versions of your installed packages are in pkgsrc
                   1006:     4.1.7. Other administrative functions
                   1007: 
                   1008: 4.2. Building packages from source
                   1009: 
                   1010:     4.2.1. Requirements
                   1011:     4.2.2. Fetching distfiles
                   1012:     4.2.3. How to build and install
                   1013: 
                   1014: Basically, there are two ways of using pkgsrc. The first is to only install the
                   1015: package tools and to use binary packages that someone else has prepared. This
                   1016: is the "pkg" in pkgsrc. The second way is to install the "src" of pkgsrc, too.
                   1017: Then you are able to build your own packages, and you can still use binary
                   1018: packages from someone else.
                   1019: 
                   1020: 4.1. Using binary packages
                   1021: 
1.9       rillig   1022: On the ftp.NetBSD.org server and its mirrors, there are collections of binary
                   1023: packages, ready to be installed. These binary packages have been built using
                   1024: the default settings for the directories, that is:
                   1025: 
                   1026:   * /usr/pkg for LOCALBASE, where most of the files are installed,
                   1027: 
                   1028:   * /usr/pkg/etc for configuration files,
                   1029: 
                   1030:   * /var for VARBASE, where those files are installed that may change after
                   1031:     installation.
                   1032: 
                   1033: If you cannot use these directories for whatever reasons (maybe because you're
                   1034: not root), you cannot use these binary packages, but have to build the packages
                   1035: yourself, which is explained in Section 3.2, "Bootstrapping pkgsrc".
1.1       dsieger  1036: 
                   1037: 4.1.1. Finding binary packages
                   1038: 
1.5       weinem   1039: To install binary packages, you first need to know from where to get them. The
                   1040: first place where you should look is on the main pkgsrc FTP server in the
                   1041: directory /pub/pkgsrc/packages.
                   1042: 
                   1043: This directory contains binary packages for multiple platforms. First, select
                   1044: your operating system. (Ignore the directories with version numbers attached to
                   1045: it, they just exist for legacy reasons.) Then, select your hardware
                   1046: architecture, and in the third step, the OS version and the "version" of
1.9       rillig   1047: pkgsrc.
                   1048: 
                   1049: In this directory, you often find a file called bootstrap.tar.gz which contains
                   1050: the package management tools. If the file is missing, it is likely that your
                   1051: operating system already provides those tools. Download the file and extract it
                   1052: in the / directory. It will create the directories /usr/pkg (containing the
1.118     sevan    1053: tools for managing binary packages and the database of installed packages).
1.1       dsieger  1054: 
                   1055: 4.1.2. Installing binary packages
                   1056: 
1.85      wiz      1057: In the directory from the last section, there is a subdirectory called All/,
1.9       rillig   1058: which contains all the binary packages that are available for the platform,
                   1059: excluding those that may not be distributed via FTP or CDROM (depending on
1.24      wiz      1060: which medium you are using).
1.9       rillig   1061: 
                   1062: To install packages directly from an FTP or HTTP server, run the following
                   1063: commands in a Bourne-compatible shell (be sure to su to root first):
                   1064: 
                   1065: # PATH="/usr/pkg/sbin:$PATH"
1.85      wiz      1066: # PKG_PATH="ftp://ftp.NetBSD.org/pub/pkgsrc/packages/OPSYS/ARCH/VERSIONS/All/"
1.9       rillig   1067: # export PATH PKG_PATH
                   1068: 
                   1069: Instead of URLs, you can also use local paths, for example if you are
                   1070: installing from a set of CDROMs, DVDs or an NFS-mounted repository. If you want
                   1071: to install packages from multiple sources, you can separate them by a semicolon
                   1072: in PKG_PATH.
                   1073: 
                   1074: After these preparations, installing a package is very easy:
                   1075: 
1.118     sevan    1076: # pkg_add libreoffice
1.9       rillig   1077: # pkg_add kde-3.5.7
1.118     sevan    1078: # pkg_add ap24-php71-*
1.1       dsieger  1079: 
                   1080: Note that any prerequisite packages needed to run the package in question will
                   1081: be installed, too, assuming they are present where you install from.
                   1082: 
1.25      wiz      1083: Adding packages might install vulnerable packages. Thus you should run 
1.24      wiz      1084: pkg_admin audit regularly, especially after installing new packages, and verify
                   1085: that the vulnerabilities are acceptable for your configuration.
1.1       dsieger  1086: 
                   1087: After you've installed packages, be sure to have /usr/pkg/bin and /usr/pkg/sbin
                   1088: in your PATH so you can actually start the just installed program.
                   1089: 
                   1090: 4.1.3. Deinstalling packages
                   1091: 
                   1092: To deinstall a package, it does not matter whether it was installed from source
                   1093: code or from a binary package. The pkg_delete command does not know it anyway.
                   1094: To delete a package, you can just run pkg_delete package-name. The package name
                   1095: can be given with or without version number. Wildcards can also be used to
                   1096: deinstall a set of packages, for example *emacs*. Be sure to include them in
                   1097: quotes, so that the shell does not expand them before pkg_delete sees them.
                   1098: 
                   1099: The -r option is very powerful: it removes all the packages that require the
                   1100: package in question and then removes the package itself. For example:
                   1101: 
                   1102: # pkg_delete -r jpeg
                   1103: 
                   1104: 
                   1105: will remove jpeg and all the packages that used it; this allows upgrading the
                   1106: jpeg package.
                   1107: 
                   1108: 4.1.4. Getting information about installed packages
                   1109: 
                   1110: The pkg_info shows information about installed packages or binary package
                   1111: files.
                   1112: 
                   1113: 4.1.5. Checking for security vulnerabilities in installed packages
                   1114: 
                   1115: The NetBSD Security-Officer and Packages Groups maintain a list of known
                   1116: security vulnerabilities to packages which are (or have been) included in
                   1117: pkgsrc. The list is available from the NetBSD FTP site at ftp://ftp.NetBSD.org/
                   1118: pub/pkgsrc/distfiles/vulnerabilities.
                   1119: 
1.23      jakllsch 1120: Through pkg_admin fetch-pkg-vulnerabilities, this list can be downloaded
                   1121: automatically, and a security audit of all packages installed on a system can
                   1122: take place.
                   1123: 
                   1124: There are two components to auditing. The first step, pkg_admin
                   1125: fetch-pkg-vulnerabilities, is for downloading the list of vulnerabilities from
                   1126: the NetBSD FTP site. The second step, pkg_admin audit, checks to see if any of
                   1127: your installed packages are vulnerable. If a package is vulnerable, you will
                   1128: see output similar to the following:
1.1       dsieger  1129: 
                   1130: Package samba-2.0.9 has a local-root-shell vulnerability, see
                   1131:     http://www.samba.org/samba/whatsnew/macroexploit.html
                   1132: 
1.23      jakllsch 1133: You may wish to have the vulnerabilities file downloaded daily so that it
                   1134: remains current. This may be done by adding an appropriate entry to the root
                   1135: users crontab(5) entry. For example the entry
                   1136: 
1.121   ! sevan    1137: # Download vulnerabilities file
1.118     sevan    1138: 0 3 * * * /usr/pkg/sbin/pkg_admin fetch-pkg-vulnerabilities >/dev/null 2>&1
1.121   ! sevan    1139: # Audit the installed packages and email results to root
        !          1140: 9 3 * * * /usr/pkg/sbin/pkg_admin audit |mail -s "Installed package audit result" \
        !          1141:             root >/dev/null 2>&1
1.118     sevan    1142: 
                   1143: 
                   1144: will update the vulnerability list every day at 3AM, followed by an audit at
                   1145: 3:09AM. The result of the audit are then emailed to root. On NetBSD this may be
                   1146: accomplished instead by adding the following line to /etc/daily.conf:
                   1147: 
                   1148: fetch_pkg_vulnerabilities=YES
                   1149: 
1.23      jakllsch 1150: 
1.118     sevan    1151: to fetch the vulnerability list from the daily security script. The system is
                   1152: set to audit the packages by default but can be set explicitly, if desired (not
                   1153: required), by adding the follwing line to /etc/security.conf:
1.23      jakllsch 1154: 
1.118     sevan    1155: check_pkg_vulnerabilities=YES
1.23      jakllsch 1156: 
                   1157: 
1.118     sevan    1158: see daily.conf(5) and security.conf(5) for more details.
1.1       dsieger  1159: 
                   1160: 4.1.6. Finding if newer versions of your installed packages are in pkgsrc
                   1161: 
1.12      weinem   1162: Install pkgtools/lintpkgsrc and run lintpkgsrc with the "-i" argument to check
                   1163: if your packages are up-to-date, e.g.
1.1       dsieger  1164: 
                   1165: % lintpkgsrc -i
                   1166: ...
                   1167: Version mismatch: 'tcsh' 6.09.00 vs 6.10.00
                   1168: 
                   1169: 
                   1170: You can then use make update to update the package on your system and rebuild
                   1171: any dependencies.
                   1172: 
                   1173: 4.1.7. Other administrative functions
                   1174: 
                   1175: The pkg_admin executes various administrative functions on the package system.
                   1176: 
                   1177: 4.2. Building packages from source
                   1178: 
                   1179: After obtaining pkgsrc, the pkgsrc directory now contains a set of packages,
1.25      wiz      1180: organized into categories. You can browse the online index of packages, or run 
1.1       dsieger  1181: make readme from the pkgsrc directory to build local README.html files for all
                   1182: packages, viewable with any web browser such as www/lynx or www/firefox.
                   1183: 
                   1184: The default prefix for installed packages is /usr/pkg. If you wish to change
                   1185: this, you should do so by setting LOCALBASE in mk.conf. You should not try to
                   1186: use multiple different LOCALBASE definitions on the same system (inside a
                   1187: chroot is an exception).
                   1188: 
                   1189: The rest of this chapter assumes that the package is already in pkgsrc. If it
                   1190: is not, see Part II, "The pkgsrc developer's guide" for instructions how to
                   1191: create your own packages.
                   1192: 
                   1193: 4.2.1. Requirements
                   1194: 
                   1195: To build packages from source, you need a working C compiler. On NetBSD, you
                   1196: need to install the "comp" and the "text" distribution sets. If you want to
                   1197: build X11-related packages, the "xbase" and "xcomp" distribution sets are
                   1198: required, too.
                   1199: 
                   1200: 4.2.2. Fetching distfiles
                   1201: 
                   1202: The first step for building a package is downloading the distfiles (i.e. the
                   1203: unmodified source). If they have not yet been downloaded, pkgsrc will fetch
                   1204: them automatically.
                   1205: 
                   1206: If you have all files that you need in the distfiles directory, you don't need
                   1207: to connect. If the distfiles are on CD-ROM, you can mount the CD-ROM on /cdrom
                   1208: and add:
                   1209: 
                   1210: DISTDIR=/cdrom/pkgsrc/distfiles
                   1211: 
                   1212: to your mk.conf.
                   1213: 
                   1214: By default a list of distribution sites will be randomly intermixed to prevent
                   1215: huge load on servers which holding popular packages (for example,
                   1216: SourceForge.net mirrors). Thus, every time when you need to fetch yet another
                   1217: distfile all the mirrors will be tried in new (random) order. You can turn this
                   1218: feature off by setting MASTER_SORT_RANDOM=NO (for PKG_DEVELOPERs it's already
                   1219: disabled).
                   1220: 
                   1221: You can overwrite some of the major distribution sites to fit to sites that are
                   1222: close to your own. By setting one or two variables you can modify the order in
                   1223: which the master sites are accessed. MASTER_SORT contains a whitespace
                   1224: delimited list of domain suffixes. MASTER_SORT_REGEX is even more flexible, it
                   1225: contains a whitespace delimited list of regular expressions. It has higher
                   1226: priority than MASTER_SORT. Have a look at pkgsrc/mk/defaults/mk.conf to find
                   1227: some examples. This may save some of your bandwidth and time.
                   1228: 
                   1229: You can change these settings either in your shell's environment, or, if you
1.4       rillig   1230: want to keep the settings, by editing the mk.conf file, and adding the
1.1       dsieger  1231: definitions there.
                   1232: 
                   1233: If a package depends on many other packages (such as meta-pkgs/kde3), the build
                   1234: process may alternate between periods of downloading source, and compiling. To
                   1235: ensure you have all the source downloaded initially you can run the command:
                   1236: 
                   1237: % make fetch-list | sh
                   1238: 
                   1239: which will output and run a set of shell commands to fetch the necessary files
                   1240: into the distfiles directory. You can also choose to download the files
                   1241: manually.
                   1242: 
                   1243: 4.2.3. How to build and install
                   1244: 
                   1245: Once the software has downloaded, any patches will be applied, then it will be
                   1246: compiled for you. This may take some time depending on your computer, and how
                   1247: many other packages the software depends on and their compile time.
                   1248: 
                   1249: Note
                   1250: 
                   1251: If using bootstrap or pkgsrc on a non-NetBSD system, use the pkgsrc bmake
                   1252: command instead of "make" in the examples in this guide.
                   1253: 
                   1254: For example, type
                   1255: 
                   1256: % cd misc/figlet
                   1257: % make
                   1258: 
                   1259: 
                   1260: at the shell prompt to build the various components of the package.
                   1261: 
                   1262: The next stage is to actually install the newly compiled program onto your
                   1263: system. Do this by entering:
                   1264: 
                   1265: % make install
                   1266: 
                   1267: 
                   1268: while you are still in the directory for whatever package you are installing.
                   1269: 
                   1270: Installing the package on your system may require you to be root. However,
                   1271: pkgsrc has a just-in-time-su feature, which allows you to only become root for
                   1272: the actual installation step.
                   1273: 
                   1274: That's it, the software should now be installed and setup for use. You can now
                   1275: enter:
                   1276: 
                   1277: % make clean
                   1278: 
                   1279: 
                   1280: to remove the compiled files in the work directory, as you shouldn't need them
                   1281: any more. If other packages were also added to your system (dependencies) to
                   1282: allow your program to compile, you can tidy these up also with the command:
                   1283: 
                   1284: % make clean-depends
                   1285: 
                   1286: 
                   1287: Taking the figlet utility as an example, we can install it on our system by
                   1288: building as shown in Appendix B, Build logs.
                   1289: 
                   1290: The program is installed under the default root of the packages tree - /usr/
                   1291: pkg. Should this not conform to your tastes, set the LOCALBASE variable in your
                   1292: environment, and it will use that value as the root of your packages tree. So,
                   1293: to use /usr/local, set LOCALBASE=/usr/local in your environment. Please note
                   1294: that you should use a directory which is dedicated to packages and not shared
                   1295: with other programs (i.e., do not try and use LOCALBASE=/usr). Also, you should
                   1296: not try to add any of your own files or directories (such as src/, obj/, or
                   1297: pkgsrc/) below the LOCALBASE tree. This is to prevent possible conflicts
                   1298: between programs and other files installed by the package system and whatever
                   1299: else may have been installed there.
                   1300: 
1.4       rillig   1301: Some packages look in mk.conf to alter some configuration options at build
1.1       dsieger  1302: time. Have a look at pkgsrc/mk/defaults/mk.conf to get an overview of what will
                   1303: be set there by default. Environment variables such as LOCALBASE can be set in
1.4       rillig   1304: mk.conf to save having to remember to set them each time you want to use
1.1       dsieger  1305: pkgsrc.
                   1306: 
                   1307: Occasionally, people want to "look under the covers" to see what is going on
                   1308: when a package is building or being installed. This may be for debugging
                   1309: purposes, or out of simple curiosity. A number of utility values have been
                   1310: added to help with this.
                   1311: 
                   1312:  1. If you invoke the make(1) command with PKG_DEBUG_LEVEL=2, then a huge
                   1313:     amount of information will be displayed. For example,
                   1314: 
                   1315:     make patch PKG_DEBUG_LEVEL=2
                   1316: 
1.25      wiz      1317:     will show all the commands that are invoked, up to and including the "patch
                   1318:     " stage.
1.1       dsieger  1319: 
                   1320:  2. If you want to know the value of a certain make(1) definition, then the
                   1321:     VARNAME definition should be used, in conjunction with the show-var target.
                   1322:     e.g. to show the expansion of the make(1) variable LOCALBASE:
                   1323: 
                   1324:     % make show-var VARNAME=LOCALBASE
                   1325:     /usr/pkg
                   1326:     %
                   1327: 
                   1328: 
                   1329: If you want to install a binary package that you've either created yourself
                   1330: (see next section), that you put into pkgsrc/packages manually or that is
                   1331: located on a remote FTP server, you can use the "bin-install" target. This
                   1332: target will install a binary package - if available - via pkg_add(1), else do a
                   1333: make package. The list of remote FTP sites searched is kept in the variable
                   1334: BINPKG_SITES, which defaults to ftp.NetBSD.org. Any flags that should be added
                   1335: to pkg_add(1) can be put into BIN_INSTALL_FLAGS. See pkgsrc/mk/defaults/mk.conf
                   1336: for more details.
                   1337: 
                   1338: A final word of warning: If you set up a system that has a non-standard setting
                   1339: for LOCALBASE, be sure to set that before any packages are installed, as you
                   1340: cannot use several directories for the same purpose. Doing so will result in
                   1341: pkgsrc not being able to properly detect your installed packages, and fail
                   1342: miserably. Note also that precompiled binary packages are usually built with
                   1343: the default LOCALBASE of /usr/pkg, and that you should not install any if you
                   1344: use a non-standard LOCALBASE.
                   1345: 
                   1346: Chapter 5. Configuring pkgsrc
                   1347: 
                   1348: Table of Contents
                   1349: 
                   1350: 5.1. General configuration
                   1351: 5.2. Variables affecting the build process
1.9       rillig   1352: 5.3. Variables affecting the installation process
1.4       rillig   1353: 5.4. Selecting and configuring the compiler
1.1       dsieger  1354: 
1.4       rillig   1355:     5.4.1. Selecting the compiler
                   1356:     5.4.2. Additional flags to the compiler (CFLAGS)
                   1357:     5.4.3. Additional flags to the linker (LDFLAGS)
1.1       dsieger  1358: 
1.4       rillig   1359: 5.5. Developer/advanced settings
                   1360: 5.6. Selecting Build Options
1.1       dsieger  1361: 
                   1362: The whole pkgsrc system is configured in a single file, usually called mk.conf.
                   1363: In which directory pkgsrc looks for that file depends on the installation. On
                   1364: NetBSD, when you use make(1) from the base system, it is in the directory /etc
                   1365: /. In all other cases the default location is ${PREFIX}/etc/, depending on
                   1366: where you told the bootstrap program to install the binary packages.
                   1367: 
                   1368: The format of the configuration file is that of the usual BSD-style Makefiles.
                   1369: The whole pkgsrc configuration is done by setting variables in this file. Note
                   1370: that you can define all kinds of variables, and no special error checking (for
1.112     rillig   1371: example for spelling mistakes) takes place.
1.1       dsieger  1372: 
                   1373: 5.1. General configuration
                   1374: 
1.112     rillig   1375: The following variables apply to all pkgsrc packages. A complete list of the
                   1376: variables that can be configured by the user is available in mk/defaults/
                   1377: mk.conf, together with some comments that describe each variable's intent.
1.1       dsieger  1378: 
                   1379:   * LOCALBASE: Where packages will be installed. The default is /usr/pkg. Do
                   1380:     not mix binary packages with different LOCALBASEs!
                   1381: 
                   1382:   * CROSSBASE: Where "cross" category packages will be installed. The default
                   1383:     is ${LOCALBASE}/cross.
                   1384: 
1.84      wiz      1385:   * X11BASE: Where X11 is installed on the system. The default is /usr/X11R7.
1.1       dsieger  1386: 
                   1387:   * DISTDIR: Where to store the downloaded copies of the original source
                   1388:     distributions used for building pkgsrc packages. The default is $
                   1389:     {PKGSRCDIR}/distfiles.
                   1390: 
                   1391:   * PKG_DBDIR: Where the database about installed packages is stored. The
1.118     sevan    1392:     default is /usr/pkg/pkgdb.
1.1       dsieger  1393: 
                   1394:   * MASTER_SITE_OVERRIDE: If set, override the packages' MASTER_SITES with this
                   1395:     value.
                   1396: 
                   1397:   * MASTER_SITE_BACKUP: Backup location(s) for distribution files and patch
                   1398:     files if not found locally or in ${MASTER_SITES} or ${PATCH_SITES}
1.118     sevan    1399:     respectively. The defaults is ftp://ftp.NetBSD.org/pub/pkgsrc/distfiles/$
1.1       dsieger  1400:     {DIST_SUBDIR}/.
                   1401: 
                   1402:   * BINPKG_SITES: List of sites carrying binary pkgs. rel and arch are replaced
                   1403:     with OS release ("2.0", etc.) and architecture ("mipsel", etc.).
                   1404: 
1.23      jakllsch 1405:   * ACCEPTABLE_LICENSES: List of acceptable licenses. License names are
                   1406:     case-sensitive. Whenever you try to build a package whose license is not in
                   1407:     this list, you will get an error message. If the license condition is
                   1408:     simple enough, the error message will include specific instructions on how
                   1409:     to change this variable.
1.1       dsieger  1410: 
                   1411: 5.2. Variables affecting the build process
                   1412: 
                   1413:   * PACKAGES: The top level directory for the binary packages. The default is $
                   1414:     {PKGSRCDIR}/packages.
                   1415: 
                   1416:   * WRKOBJDIR: The top level directory where, if defined, the separate working
                   1417:     directories will get created, and symbolically linked to from ${WRKDIR}
                   1418:     (see below). This is useful for building packages on several architectures,
                   1419:     then ${PKGSRCDIR} can be NFS-mounted while ${WRKOBJDIR} is local to every
                   1420:     architecture. (It should be noted that PKGSRCDIR should not be set by the
                   1421:     user ? it is an internal definition which refers to the root of the pkgsrc
                   1422:     tree. It is possible to have many pkgsrc tree instances.)
                   1423: 
                   1424:   * LOCALPATCHES: Directory for local patches that aren't part of pkgsrc. See
1.6       rillig   1425:     Section 11.3, "patches/*" for more information.
1.1       dsieger  1426: 
                   1427:   * PKGMAKECONF: Location of the mk.conf file used by a package's BSD-style
                   1428:     Makefile. If this is not set, MAKECONF is set to /dev/null to avoid picking
                   1429:     up settings used by builds in /usr/src.
                   1430: 
                   1431:   * DEPENDS_TARGET: By default, dependencies are only installed, and no binary
1.66      asau     1432:     package is created for them. You can set this variable to package-install
                   1433:     to automatically create binary packages after installing dependencies.
1.84      wiz      1434:     Please note that the PKGSRC_KEEP_BIN_PKGS can be set to yes to preserve
1.80      wiz      1435:     binary packages when using the install as well.
1.1       dsieger  1436: 
1.9       rillig   1437: 5.3. Variables affecting the installation process
1.1       dsieger  1438: 
1.107     jnemeth  1439: Packages have to support installation into a subdirectory of WRKDIR. This
                   1440: allows a package to be built, before the actual filesystem is touched. DESTDIR
                   1441: support exists in two variations:
1.4       rillig   1442: 
                   1443:   * Basic DESTDIR support means that the package installation and packaging is
                   1444:     still run as root.
                   1445: 
                   1446:   * Full DESTDIR support can run the complete build, installation and packaging
                   1447:     as normal user. Root privileges are only needed to add packages.
                   1448: 
                   1449: With basic DESTDIR support, make clean needs to be run as root.
                   1450: 
1.17      imil     1451: Considering the foo/bar package, DESTDIR full support can be tested using the
                   1452: following commands
                   1453: 
                   1454: $ id
                   1455: uid=1000(myusername) gid=100(users) groups=100(users),0(wheel)
                   1456: $ mkdir $HOME/packages
                   1457: $ cd $PKGSRCDIR/foo/bar
                   1458: 
                   1459: Verify DESTDIR full support, no root privileges should be needed
                   1460: 
1.66      asau     1461: $ make stage-install
1.17      imil     1462: 
                   1463: Create a package without root privileges
                   1464: 
1.66      asau     1465: $ make PACKAGES=$HOME/packages package
1.17      imil     1466: 
                   1467: For the following command, you must be able to gain root privileges using su(1)
                   1468: 
1.66      asau     1469: $ make PACKAGES=$HOME/packages install
1.17      imil     1470: 
                   1471: Then, as a simple user
                   1472: 
                   1473: $ make clean
                   1474: 
1.4       rillig   1475: 5.4. Selecting and configuring the compiler
                   1476: 
                   1477: 5.4.1. Selecting the compiler
1.1       dsieger  1478: 
                   1479: By default, pkgsrc will use GCC to build packages. This may be overridden by
                   1480: setting the following variables in /etc/mk.conf:
                   1481: 
                   1482: PKGSRC_COMPILER:
                   1483: 
                   1484:     This is a list of values specifying the chain of compilers to invoke when
                   1485:     building packages. Valid values are:
                   1486: 
1.66      asau     1487:       + ccc: Compaq C Compilers (Tru64)
                   1488: 
                   1489:       + ccache: compiler cache (chainable)
                   1490: 
                   1491:       + clang: Clang C and Objective-C compiler
                   1492: 
1.42      asau     1493:       + distcc: distributed C/C++ (chainable)
1.1       dsieger  1494: 
1.66      asau     1495:       + f2c: Fortran 77 to C compiler (chainable)
                   1496: 
                   1497:       + icc: Intel C++ Compiler (Linux)
                   1498: 
                   1499:       + ido: SGI IRIS Development Option cc (IRIX 5)
1.1       dsieger  1500: 
1.42      asau     1501:       + gcc: GNU C/C++ Compiler
1.1       dsieger  1502: 
1.66      asau     1503:       + hp: HP-UX C/aC++ compilers
                   1504: 
1.42      asau     1505:       + mipspro: Silicon Graphics, Inc. MIPSpro (n32/n64)
1.1       dsieger  1506: 
1.66      asau     1507:       + mipspro-ucode: Silicon Graphics, Inc. MIPSpro (o32)
1.1       dsieger  1508: 
1.42      asau     1509:       + sunpro: Sun Microsystems, Inc. WorkShip/Forte/Sun ONE Studio
1.1       dsieger  1510: 
1.118     sevan    1511:       + xlc: IBM's XL C/C++ compiler suite
1.66      asau     1512: 
1.1       dsieger  1513:     The default is "gcc". You can use ccache and/or distcc with an appropriate
                   1514:     PKGSRC_COMPILER setting, e.g. "ccache gcc". This variable should always be
                   1515:     terminated with a value for a real compiler. Note that only one real
                   1516:     compiler should be listed (e.g. "sunpro gcc" is not allowed).
                   1517: 
                   1518: GCC_REQD:
                   1519: 
                   1520:     This specifies the minimum version of GCC to use when building packages. If
                   1521:     the system GCC doesn't satisfy this requirement, then pkgsrc will build and
                   1522:     install one of the GCC packages to use instead.
                   1523: 
1.114     maya     1524: PYTHON_DEFAULT_VERSION:
                   1525: 
                   1526:     Specifies which version of python to use when several options are
                   1527:     available.
                   1528: 
                   1529: PKGSRC_FORTRAN:
                   1530: 
                   1531:     Specifies the fortran compiler to use. The default is g95, and gfortran is
                   1532:     an alternative.
                   1533: 
                   1534: GFORTRAN_VERSION:
                   1535: 
                   1536:     If PKGSRC_FORTRAN= gfortran is used, this option specifies which version to
                   1537:     use.
                   1538: 
1.4       rillig   1539: 5.4.2. Additional flags to the compiler (CFLAGS)
1.1       dsieger  1540: 
                   1541: If you wish to set the CFLAGS variable, please make sure to use the += operator
                   1542: instead of the = operator:
                   1543: 
                   1544: CFLAGS+=        -your -flags
                   1545: 
                   1546: Using CFLAGS= (i.e. without the "+") may lead to problems with packages that
1.16      jnemeth  1547: need to add their own flags. You may want to take a look at the devel/cpuflags
1.24      wiz      1548: package if you're interested in optimization specifically for the current CPU.
1.1       dsieger  1549: 
1.4       rillig   1550: 5.4.3. Additional flags to the linker (LDFLAGS)
1.1       dsieger  1551: 
                   1552: If you want to pass flags to the linker, both in the configure step and the
                   1553: build step, you can do this in two ways. Either set LDFLAGS or LIBS. The
                   1554: difference between the two is that LIBS will be appended to the command line,
                   1555: while LDFLAGS come earlier. LDFLAGS is pre-loaded with rpath settings for ELF
                   1556: machines depending on the setting of USE_IMAKE or the inclusion of mk/
                   1557: x11.buildlink3.mk. As with CFLAGS, if you do not wish to override these
                   1558: settings, use the += operator:
                   1559: 
                   1560: LDFLAGS+=        -your -linkerflags
                   1561: 
1.4       rillig   1562: 5.5. Developer/advanced settings
1.1       dsieger  1563: 
                   1564:   * PKG_DEVELOPER: Run some sanity checks that package developers want:
                   1565: 
1.42      asau     1566:       + make sure patches apply with zero fuzz
1.1       dsieger  1567: 
1.42      asau     1568:       + run check-shlibs to see that all binaries will find their shared libs.
1.1       dsieger  1569: 
                   1570:   * PKG_DEBUG_LEVEL: The level of debugging output which is displayed whilst
                   1571:     making and installing the package. The default value for this is 0, which
                   1572:     will not display the commands as they are executed (normal, default, quiet
                   1573:     operation); the value 1 will display all shell commands before their
                   1574:     invocation, and the value 2 will display both the shell commands before
1.112     rillig   1575:     their invocation, as well as their actual execution progress with set -x.
1.1       dsieger  1576: 
1.4       rillig   1577: 5.6. Selecting Build Options
1.1       dsieger  1578: 
                   1579: Some packages have build time options, usually to select between different
                   1580: dependencies, enable optional support for big dependencies or enable
                   1581: experimental features.
                   1582: 
                   1583: To see which options, if any, a package supports, and which options are
                   1584: mutually exclusive, run make show-options, for example:
                   1585: 
                   1586:     The following options are supported by this package:
                   1587:         ssl      Enable SSL support.
                   1588:     Exactly one of the following gecko options is required:
                   1589:         firefox  Use firefox as gecko rendering engine.
                   1590:         mozilla  Use mozilla as gecko rendering engine.
                   1591:     At most one of the following database options may be selected:
                   1592:         mysql    Enable support for MySQL database.
                   1593:         pgsql    Enable support for PostgreSQL database.
                   1594: 
                   1595:     These options are enabled by default: firefox
                   1596:     These options are currently enabled: mozilla ssl
                   1597: 
1.4       rillig   1598: The following variables can be defined in mk.conf to select which options to
                   1599: enable for a package: PKG_DEFAULT_OPTIONS, which can be used to select or
1.1       dsieger  1600: disable options for all packages that support them, and PKG_OPTIONS.pkgbase,
                   1601: which can be used to select or disable options specifically for package pkgbase
                   1602: . Options listed in these variables are selected, options preceded by "-" are
                   1603: disabled. A few examples:
                   1604: 
1.4       rillig   1605: $ grep "PKG.*OPTION" mk.conf
1.1       dsieger  1606: PKG_DEFAULT_OPTIONS=    -arts -dvdread -esound
                   1607: PKG_OPTIONS.kdebase=    debug -sasl
                   1608: PKG_OPTIONS.apache=     suexec
                   1609: 
1.11      rillig   1610: It is important to note that options that were specifically suggested by the
1.19      snj      1611: package maintainer must be explicitly removed if you do not wish to include the
                   1612: option. If you are unsure you can view the current state with make show-options
                   1613: .
1.11      rillig   1614: 
1.1       dsieger  1615: The following settings are consulted in the order given, and the last setting
                   1616: that selects or disables an option is used:
                   1617: 
                   1618:  1. the default options as suggested by the package maintainer
                   1619: 
                   1620:  2. the options implied by the settings of legacy variables (see below)
                   1621: 
                   1622:  3. PKG_DEFAULT_OPTIONS
                   1623: 
                   1624:  4. PKG_OPTIONS.pkgbase
                   1625: 
                   1626: For groups of mutually exclusive options, the last option selected is used, all
                   1627: others are automatically disabled. If an option of the group is explicitly
                   1628: disabled, the previously selected option, if any, is used. It is an error if no
                   1629: option from a required group of options is selected, and building the package
                   1630: will fail.
                   1631: 
                   1632: Before the options framework was introduced, build options were selected by
1.4       rillig   1633: setting a variable (often named USE_FOO) in mk.conf for each option. To ease
                   1634: transition to the options framework for the user, these legacy variables are
                   1635: converted to the appropriate options setting (PKG_OPTIONS.pkgbase)
                   1636: automatically. A warning is issued to prompt the user to update mk.conf to use
                   1637: the options framework directly. Support for the legacy variables will be
1.1       dsieger  1638: removed eventually.
                   1639: 
                   1640: Chapter 6. Creating binary packages
                   1641: 
                   1642: Table of Contents
                   1643: 
                   1644: 6.1. Building a single binary package
                   1645: 6.2. Settings for creation of binary packages
                   1646: 
                   1647: 6.1. Building a single binary package
                   1648: 
                   1649: Once you have built and installed a package, you can create a binary package
                   1650: which can be installed on another system with pkg_add(1). This saves having to
                   1651: build the same package on a group of hosts and wasting CPU time. It also
                   1652: provides a simple means for others to install your package, should you
                   1653: distribute it.
                   1654: 
                   1655: To create a binary package, change into the appropriate directory in pkgsrc,
                   1656: and run make package:
                   1657: 
1.112     rillig   1658: $ cd misc/figlet
                   1659: $ make package
1.1       dsieger  1660: 
                   1661: This will build and install your package (if not already done), and then build
                   1662: a binary package from what was installed. You can then use the pkg_* tools to
                   1663: manipulate it. Binary packages are created by default in /usr/pkgsrc/packages,
                   1664: in the form of a gzipped tar file. See Section B.2, "Packaging figlet" for a
                   1665: continuation of the above misc/figlet example.
                   1666: 
1.6       rillig   1667: See Chapter 21, Submitting and Committing for information on how to submit such
1.1       dsieger  1668: a binary package.
                   1669: 
                   1670: 6.2. Settings for creation of binary packages
                   1671: 
1.6       rillig   1672: See Section 17.17, "Other helpful targets".
                   1673: 
                   1674: Chapter 7. Creating binary packages for everything in pkgsrc (bulk builds)
                   1675: 
                   1676: Table of Contents
                   1677: 
1.71      wiz      1678: 7.1. Preparations
                   1679: 7.2. Running a pbulk-style bulk build
1.6       rillig   1680: 
1.71      wiz      1681:     7.2.1. Configuration
1.6       rillig   1682: 
1.71      wiz      1683: 7.3. Requirements of a full bulk build
1.66      asau     1684: 7.4. Creating a multiple CD-ROM packages collection
1.6       rillig   1685: 
1.66      asau     1686:     7.4.1. Example of cdpack
1.6       rillig   1687: 
1.71      wiz      1688: For a number of reasons you may want to build binary packages for a large
                   1689: selected set of packages in pkgsrc or even for all pkgsrc packages. For
                   1690: instance, when you have multiple machines that should run the same software, it
                   1691: is wasted time if they all build their packages themselves from source. Or you
                   1692: may want to build a list of packages you want and check them before deploying
                   1693: onto production system. There is a way of getting a set of binary packages: The
1.112     rillig   1694: bulk build system, or pbulk ("p" stands for "parallel"). This chapter describes
                   1695: how to set it up.
1.71      wiz      1696: 
                   1697: 7.1. Preparations
                   1698: 
                   1699: First of all, you have to decide whether you build all packages or a limited
                   1700: set of them. Full bulk builds usually consume a lot more resources, both space
                   1701: and time, than builds for some practical sets of packages. There exists a
                   1702: number of particularly heavy packages that are not actually interesting to a
                   1703: wide audience. For a limited bulk builds you need to make a list of packages
1.112     rillig   1704: you want to build. Note that all their dependencies will be built, so you don't
                   1705: need to track them manually.
1.71      wiz      1706: 
                   1707: During bulk builds various packages are installed and deinstalled in /usr/pkg
                   1708: (or whatever LOCALBASE is), so make sure that you don't need any package during
1.112     rillig   1709: the builds. Essentially, you should provide a fresh system, either a chroot
1.71      wiz      1710: environment or something even more restrictive, depending on what the operating
                   1711: system provides, or dedicate the whole physical machine. As a useful side
                   1712: effect this makes sure that bulk builds cannot break anything in your system.
                   1713: There have been numerous cases where certain packages tried to install files
                   1714: outside the LOCALBASE or wanted to edit some files in /etc.
1.6       rillig   1715: 
1.71      wiz      1716: 7.2. Running a pbulk-style bulk build
1.6       rillig   1717: 
1.15      rillig   1718: Running a pbulk-style bulk build works roughly as follows:
                   1719: 
                   1720:   * First, build the pbulk infrastructure in a fresh pkgsrc location.
                   1721: 
                   1722:   * Then, build each of the packages from a clean installation directory using
                   1723:     the infrastructure.
                   1724: 
1.71      wiz      1725: 7.2.1. Configuration
1.6       rillig   1726: 
1.112     rillig   1727: To simplify configuration, we provide the helper script mk/pbulk/pbulk.sh.
1.6       rillig   1728: 
1.68      asau     1729: In order to use it, prepare a clear system (real one, chroot environment, jail,
                   1730: zone, virtual machine). Configure network access to fetch distribution files.
1.112     rillig   1731: Create a user with name "pbulk".
1.68      asau     1732: 
                   1733: Fetch and extract pkgsrc. Use a command like one of these:
                   1734: 
1.72      wiz      1735: # (cd /usr && ftp -o - http://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc.tar.gz | tar -zxf-)
                   1736: # (cd /usr && fetch -o - http://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc.tar.gz | tar -zxf-)
                   1737: # (cd /usr && cvs -Q -z3 -d anoncvs@anoncvs.NetBSD.org:/cvsroot get -P pkgsrc)
1.68      asau     1738: 
                   1739: Or any other way that fits (e.g., curl, wget).
                   1740: 
                   1741: Deploy and configure pbulk tools, e.g.:
                   1742: 
1.118     sevan    1743: # sh pbulk.sh -n # use native make, no bootstrap kit needed (for use on NetBSD)
1.68      asau     1744: # sh pbulk.sh -n -c mk.conf.frag # native, apply settings from given mk.conf fragment
                   1745: # sh pbulk.sh -nlc mk.conf.frag # native, apply settings, configure for limited build
                   1746: 
                   1747: Note
                   1748: 
                   1749: mk.conf.frag is a fragment of mk.conf that contains settings you want to apply
                   1750: to packages you build. For instance,
                   1751: 
1.112     rillig   1752: PKG_DEVELOPER=          yes     # perform more checks
                   1753: X11_TYPE=               modular # use pkgsrc X11
                   1754: SKIP_LICENSE_CHECK=     yes     # accept all licences (useful
                   1755:                                 # when building all packages)
1.68      asau     1756: 
                   1757: If configured for limited list, replace the list in /usr/pbulk/etc/pbulk.list
1.112     rillig   1758: with your list of packages, one per line without empty lines or comments. E.g.:
1.68      asau     1759: 
                   1760: www/firefox
                   1761: mail/thunderbird
                   1762: misc/libreoffice4
                   1763: 
1.69      asau     1764: At this point you can also review configuration in /usr/pbulk/etc and make
                   1765: final amendments, if wanted.
                   1766: 
1.68      asau     1767: Start it:
                   1768: 
                   1769: # /usr/pbulk/bin/bulkbuild
                   1770: 
                   1771: After it finishes, you'll have /mnt filled with distribution files, binary
                   1772: packages, and reports, plain text summary in /mnt/bulklog/meta/report.txt
                   1773: 
                   1774: Note
                   1775: 
                   1776: The pbulk.sh script does not cover all possible use cases. While being ready to
                   1777: run, it serves as a good starting point to understand and build more complex
                   1778: setups. The script is kept small enough for better understanding.
                   1779: 
                   1780: Note
                   1781: 
                   1782: The pbulk.sh script supports running unprivileged bulk build and helps
                   1783: configuring distributed bulk builds.
1.15      rillig   1784: 
1.71      wiz      1785: 7.3. Requirements of a full bulk build
                   1786: 
                   1787: A complete bulk build requires lots of disk space. Some of the disk space can
                   1788: be read-only, some other must be writable. Some can be on remote filesystems
                   1789: (such as NFS) and some should be local. Some can be temporary filesystems,
                   1790: others must survive a sudden reboot.
                   1791: 
                   1792:   * 40 GB for the distfiles (read-write, remote, temporary)
                   1793: 
                   1794:   * 30 GB for the binary packages (read-write, remote, permanent)
                   1795: 
                   1796:   * 1 GB for the pkgsrc tree (read-only, remote, permanent)
                   1797: 
                   1798:   * 5 GB for LOCALBASE (read-write, local, temporary)
                   1799: 
                   1800:   * 10 GB for the log files (read-write, remote, permanent)
                   1801: 
                   1802:   * 5 GB for temporary files (read-write, local, temporary)
                   1803: 
1.66      asau     1804: 7.4. Creating a multiple CD-ROM packages collection
1.1       dsieger  1805: 
                   1806: After your pkgsrc bulk-build has completed, you may wish to create a CD-ROM set
                   1807: of the resulting binary packages to assist in installing packages on other
                   1808: machines. The pkgtools/cdpack package provides a simple tool for creating the
                   1809: ISO 9660 images. cdpack arranges the packages on the CD-ROMs in a way that
                   1810: keeps all the dependencies for a given package on the same CD as that package.
                   1811: 
1.66      asau     1812: 7.4.1. Example of cdpack
1.1       dsieger  1813: 
                   1814: Complete documentation for cdpack is found in the cdpack(1) man page. The
                   1815: following short example assumes that the binary packages are left in /usr/
                   1816: pkgsrc/packages/All and that sufficient disk space exists in /u2 to hold the
                   1817: ISO 9660 images.
                   1818: 
                   1819: # mkdir /u2/images
                   1820: # pkg_add /usr/pkgsrc/packages/All/cdpack
                   1821: # cdpack /usr/pkgsrc/packages/All /u2/images
                   1822: 
                   1823: 
                   1824: If you wish to include a common set of files (COPYRIGHT, README, etc.) on each
                   1825: CD in the collection, then you need to create a directory which contains these
                   1826: files. e.g.
                   1827: 
                   1828: # mkdir /tmp/common
                   1829: # echo "This is a README" > /tmp/common/README
                   1830: # echo "Another file" > /tmp/common/COPYING
                   1831: # mkdir /tmp/common/bin
                   1832: # echo "#!/bin/sh" > /tmp/common/bin/myscript
                   1833: # echo "echo Hello world" >> /tmp/common/bin/myscript
                   1834: # chmod 755 /tmp/common/bin/myscript
                   1835: 
                   1836: 
                   1837: Now create the images:
                   1838: 
                   1839: # cdpack -x /tmp/common /usr/pkgsrc/packages/All /u2/images
                   1840: 
                   1841: Each image will contain README, COPYING, and bin/myscript in their root
                   1842: directories.
                   1843: 
1.6       rillig   1844: Chapter 8. Directory layout of the installed files
1.1       dsieger  1845: 
                   1846: Table of Contents
                   1847: 
1.6       rillig   1848: 8.1. File system layout in ${LOCALBASE}
                   1849: 8.2. File system layout in ${VARBASE}
1.1       dsieger  1850: 
                   1851: The files that are installed by pkgsrc are organized in a way that is similar
                   1852: to what you find in the /usr directory of the base system. But some details are
                   1853: different. This is because pkgsrc initially came from FreeBSD and had adopted
                   1854: its file system hierarchy. Later it was largely influenced by NetBSD. But no
                   1855: matter which operating system you are using pkgsrc with, you can expect the
                   1856: same layout for pkgsrc.
                   1857: 
                   1858: There are mainly four root directories for pkgsrc, which are all configurable
                   1859: in the bootstrap/bootstrap script. When pkgsrc has been installed as root, the
                   1860: default locations are:
                   1861: 
                   1862: LOCALBASE=              /usr/pkg
                   1863: PKG_SYSCONFBASE=        /usr/pkg/etc
                   1864: VARBASE=                /var
1.119     sevan    1865: PKG_DBDIR=              /usr/pkg/pkgdb
1.1       dsieger  1866: 
                   1867: In unprivileged mode (when pkgsrc has been installed as any other user), the
                   1868: default locations are:
                   1869: 
                   1870: LOCALBASE=              ${HOME}/pkg
                   1871: PKG_SYSCONFBASE=        ${HOME}/pkg/etc
                   1872: VARBASE=                ${HOME}/pkg/var
1.119     sevan    1873: PKG_DBDIR=              ${HOME}/pkg/pkgdb
1.1       dsieger  1874: 
                   1875: What these four directories are for, and what they look like is explained
                   1876: below.
                   1877: 
1.25      wiz      1878:   * LOCALBASE corresponds to the /usr directory in the base system. It is the "
                   1879:     main" directory where the files are installed and contains the well-known
1.1       dsieger  1880:     subdirectories like bin, include, lib, share and sbin.
                   1881: 
                   1882:   * VARBASE corresponds to /var in the base system. Some programs (especially
                   1883:     games, network daemons) need write access to it during normal operation.
                   1884: 
                   1885:   * PKG_SYSCONFDIR corresponds to /etc in the base system. It contains
                   1886:     configuration files of the packages, as well as pkgsrc's mk.conf itself.
                   1887: 
1.6       rillig   1888: 8.1. File system layout in ${LOCALBASE}
1.1       dsieger  1889: 
                   1890: The following directories exist in a typical pkgsrc installation in $
                   1891: {LOCALBASE}.
                   1892: 
                   1893: bin
                   1894: 
                   1895:     Contains executable programs that are intended to be directly used by the
                   1896:     end user.
                   1897: 
                   1898: emul
                   1899: 
                   1900:     Contains files for the emulation layers of various other operating systems,
                   1901:     especially for NetBSD.
                   1902: 
                   1903: etc (the usual location of ${PKG_SYSCONFDIR})
                   1904: 
                   1905:     Contains the configuration files.
                   1906: 
                   1907: include
                   1908: 
                   1909:     Contains headers for the C and C++ programming languages.
                   1910: 
                   1911: info
                   1912: 
                   1913:     Contains GNU info files of various packages.
                   1914: 
                   1915: lib
                   1916: 
                   1917:     Contains shared and static libraries.
                   1918: 
                   1919: libdata
                   1920: 
                   1921:     Contains data files that don't change after installation. Other data files
                   1922:     belong into ${VARBASE}.
                   1923: 
                   1924: libexec
                   1925: 
                   1926:     Contains programs that are not intended to be used by end users, such as
                   1927:     helper programs or network daemons.
                   1928: 
                   1929: libexec/cgi-bin
                   1930: 
                   1931:     Contains programs that are intended to be executed as CGI scripts by a web
                   1932:     server.
                   1933: 
                   1934: man (the usual value of ${PKGMANDIR})
                   1935: 
                   1936:     Contains brief documentation in form of manual pages.
                   1937: 
                   1938: sbin
                   1939: 
                   1940:     Contains programs that are intended to be used only by the super-user.
                   1941: 
                   1942: share
                   1943: 
                   1944:     Contains platform-independent data files that don't change after
                   1945:     installation.
                   1946: 
                   1947: share/doc
                   1948: 
                   1949:     Contains documentation files provided by the packages.
                   1950: 
                   1951: share/examples
                   1952: 
                   1953:     Contains example files provided by the packages. Among others, the original
                   1954:     configuration files are saved here and copied to ${PKG_SYSCONFDIR} during
                   1955:     installation.
                   1956: 
                   1957: share/examples/rc.d
                   1958: 
                   1959:     Contains the original files for rc.d scripts.
                   1960: 
                   1961: var (the usual location of ${VARBASE})
                   1962: 
                   1963:     Contains files that may be modified after installation.
                   1964: 
1.6       rillig   1965: 8.2. File system layout in ${VARBASE}
1.1       dsieger  1966: 
                   1967: db/pkg (the usual location of ${PKG_DBDIR})
                   1968: 
                   1969:     Contains information about the currently installed packages.
                   1970: 
                   1971: games
                   1972: 
                   1973:     Contains highscore files.
                   1974: 
                   1975: log
                   1976: 
                   1977:     Contains log files.
                   1978: 
                   1979: run
                   1980: 
                   1981:     Contains informational files about daemons that are currently running.
                   1982: 
1.6       rillig   1983: Chapter 9. Frequently Asked Questions
1.1       dsieger  1984: 
                   1985: Table of Contents
                   1986: 
1.6       rillig   1987: 9.1. Are there any mailing lists for pkg-related discussion?
1.84      wiz      1988: 9.2. Utilities for package management (pkgtools)
                   1989: 9.3. How to use pkgsrc as non-root
                   1990: 9.4. How to resume transfers when fetching distfiles?
                   1991: 9.5. How can I install/use modular X.org from pkgsrc?
                   1992: 9.6. How to fetch files from behind a firewall
                   1993: 9.7. How to fetch files from HTTPS sites
                   1994: 9.8. How do I tell make fetch to do passive FTP?
                   1995: 9.9. How to fetch all distfiles at once
                   1996: 9.10. What does "Don't know how to make /usr/share/tmac/tmac.andoc" mean?
                   1997: 9.11. What does "Could not find bsd.own.mk" mean?
                   1998: 9.12. Using 'sudo' with pkgsrc
                   1999: 9.13. How do I change the location of configuration files?
                   2000: 9.14. Automated security checks
                   2001: 9.15. Why do some packages ignore my CFLAGS?
                   2002: 9.16. A package does not build. What shall I do?
                   2003: 9.17. What does "Makefile appears to contain unresolved cvs/rcs/??? merge
1.24      wiz      2004:     conflicts" mean?
1.1       dsieger  2005: 
                   2006: This section contains hints, tips & tricks on special things in pkgsrc that we
                   2007: didn't find a better place for in the previous chapters, and it contains items
                   2008: for both pkgsrc users and developers.
                   2009: 
1.6       rillig   2010: 9.1. Are there any mailing lists for pkg-related discussion?
1.1       dsieger  2011: 
                   2012: The following mailing lists may be of interest to pkgsrc users:
                   2013: 
                   2014:   * pkgsrc-users: This is a general purpose list for most issues regarding
                   2015:     pkgsrc, regardless of platform, e.g. soliciting user help for pkgsrc
                   2016:     configuration, unexpected build failures, using particular packages,
                   2017:     upgrading pkgsrc installations, questions regarding the pkgsrc release
                   2018:     branches, etc. General announcements or proposals for changes that impact
                   2019:     the pkgsrc user community, e.g. major infrastructure changes, new features,
                   2020:     package removals, etc., may also be posted.
                   2021: 
                   2022:   * pkgsrc-bulk: A list where the results of pkgsrc bulk builds are sent and
                   2023:     discussed.
                   2024: 
                   2025:   * pkgsrc-changes: This list is for those who are interested in getting a
                   2026:     commit message for every change committed to pkgsrc. It is also available
                   2027:     in digest form, meaning one daily message containing all commit messages
                   2028:     for changes to the package source tree in that 24 hour period.
                   2029: 
                   2030: To subscribe, do:
                   2031: 
                   2032: % echo subscribe listname | mail majordomo@NetBSD.org
                   2033: 
                   2034: Archives for all these mailing lists are available from http://
                   2035: mail-index.NetBSD.org/.
                   2036: 
1.84      wiz      2037: 9.2. Utilities for package management (pkgtools)
1.1       dsieger  2038: 
                   2039: The directory pkgsrc/pkgtools contains a number of useful utilities for both
                   2040: users and developers of pkgsrc. This section attempts only to make the reader
1.121   ! sevan    2041: aware of some of the utilities and when they might be useful, and not to
        !          2042: duplicate the documentation that comes with each package.
1.1       dsieger  2043: 
                   2044: Utilities used by pkgsrc (automatically installed when needed):
                   2045: 
                   2046:   * pkgtools/x11-links: Symlinks for use by buildlink.
                   2047: 
                   2048: OS tool augmentation (automatically installed when needed):
                   2049: 
1.121   ! sevan    2050:   * pkgtools/digest: Calculates various kinds of checksums (including SHA3).
1.1       dsieger  2051: 
                   2052:   * pkgtools/libnbcompat: Compatibility library for pkgsrc tools.
                   2053: 
                   2054:   * pkgtools/mtree: Installed on non-BSD systems due to lack of native mtree.
                   2055: 
                   2056:   * pkgtools/pkg_install: Up-to-date replacement for /usr/sbin/pkg_install, or
                   2057:     for use on operating systems where pkg_install is not present.
                   2058: 
                   2059: Utilities used by pkgsrc (not automatically installed):
                   2060: 
                   2061:   * pkgtools/pkg_tarup: Create a binary package from an already-installed
                   2062:     package. Used by make replace to save the old package.
                   2063: 
                   2064:   * pkgtools/dfdisk: Adds extra functionality to pkgsrc, allowing it to fetch
                   2065:     distfiles from multiple locations. It currently supports the following
                   2066:     methods: multiple CD-ROMs and network FTP/HTTP connections.
                   2067: 
                   2068:   * devel/cpuflags: Determine the best compiler flags to optimise code for your
1.24      wiz      2069:     current CPU and compiler.
1.1       dsieger  2070: 
                   2071: Utilities for keeping track of installed packages, being up to date, etc:
                   2072: 
1.65      wiz      2073:   * pkgtools/pkgin: A package update tool similar to apt(1). Download, install,
                   2074:     and upgrade binary packages easily.
                   2075: 
1.1       dsieger  2076:   * pkgtools/pkg_chk: Reports on packages whose installed versions do not match
                   2077:     the latest pkgsrc entries.
                   2078: 
                   2079:   * pkgtools/pkgdep: Makes dependency graphs of packages, to aid in choosing a
                   2080:     strategy for updating.
                   2081: 
                   2082:   * pkgtools/pkgdepgraph: Makes graphs from the output of pkgtools/pkgdep (uses
                   2083:     graphviz).
                   2084: 
1.12      weinem   2085:   * pkgtools/pkglint: The pkglint(1) program checks a pkgsrc entry for errors.
                   2086: 
                   2087:   * pkgtools/lintpkgsrc: The lintpkgsrc(1) program does various checks on the
                   2088:     complete pkgsrc system.
1.1       dsieger  2089: 
                   2090:   * pkgtools/pkgsurvey: Report what packages you have installed.
                   2091: 
                   2092: Utilities for people maintaining or creating individual packages:
                   2093: 
                   2094:   * pkgtools/pkgdiff: Automate making and maintaining patches for a package
                   2095:     (includes pkgdiff, pkgvi, mkpatches, etc.).
                   2096: 
1.65      wiz      2097:   * pkgtools/url2pkg: Aids in converting to pkgsrc.
1.1       dsieger  2098: 
                   2099: Utilities for people maintaining pkgsrc (or: more obscure pkg utilities)
                   2100: 
                   2101:   * pkgtools/pkg_comp: Build packages in a chrooted area.
                   2102: 
                   2103:   * pkgtools/libkver: Spoof kernel version for chrooted cross builds.
                   2104: 
1.84      wiz      2105: 9.3. How to use pkgsrc as non-root
1.1       dsieger  2106: 
1.108     rillig   2107: To install packages from source as a non-root user, download pkgsrc as
                   2108: described in Chapter 2, Where to get pkgsrc and how to keep it up-to-date, cd
                   2109: into that directory and run the command ./bootstrap/bootstrap --unprivileged.
                   2110: 
                   2111: This will install the binary part of pkgsrc to ~/pkg and put the pkgsrc
                   2112: configuration mk.conf into ~/pkg/etc.
                   2113: 
                   2114: For more details, see mk/unprivileged.mk.
1.1       dsieger  2115: 
1.84      wiz      2116: 9.4. How to resume transfers when fetching distfiles?
1.1       dsieger  2117: 
                   2118: By default, resuming transfers in pkgsrc is disabled, but you can enable this
1.4       rillig   2119: feature by adding the option PKG_RESUME_TRANSFERS=YES into mk.conf. If, during
                   2120: a fetch step, an incomplete distfile is found, pkgsrc will try to resume it.
1.1       dsieger  2121: 
1.61      wiz      2122: You can also use a different program than the platform default program by
                   2123: changing the FETCH_USING variable. You can specify the program by using of ftp,
                   2124: fetch, wget or curl. Alternatively, fetching can be disabled by using the value
                   2125: manual. A value of custom disables the system defaults and dependency tracking
                   2126: for the fetch program. In that case you have to provide FETCH_CMD,
                   2127: FETCH_BEFORE_ARGS, FETCH_RESUME_ARGS, FETCH_OUTPUT_ARGS, FETCH_AFTER_ARGS.
1.1       dsieger  2128: 
1.16      jnemeth  2129: For example, if you want to use wget to download, you'll have to use something
                   2130: like:
1.1       dsieger  2131: 
1.16      jnemeth  2132: FETCH_USING=    wget
1.1       dsieger  2133: 
1.84      wiz      2134: 9.5. How can I install/use modular X.org from pkgsrc?
1.1       dsieger  2135: 
1.4       rillig   2136: If you want to use modular X.org from pkgsrc instead of your system's own X11
                   2137: (/usr/X11R6, /usr/openwin, ...) you will have to add the following line into
1.1       dsieger  2138: mk.conf:
                   2139: 
1.4       rillig   2140: X11_TYPE=modular
1.1       dsieger  2141: 
1.84      wiz      2142: 9.6. How to fetch files from behind a firewall
1.1       dsieger  2143: 
                   2144: If you are sitting behind a firewall which does not allow direct connections to
                   2145: Internet hosts (i.e. non-NAT), you may specify the relevant proxy hosts. This
                   2146: is done using an environment variable in the form of a URL, e.g. in Amdahl, the
                   2147: machine "orpheus.amdahl.com" is one of the firewalls, and it uses port 80 as
                   2148: the proxy port number. So the proxy environment variables are:
                   2149: 
                   2150: ftp_proxy=ftp://orpheus.amdahl.com:80/
                   2151: http_proxy=http://orpheus.amdahl.com:80/
                   2152: 
1.84      wiz      2153: 9.7. How to fetch files from HTTPS sites
1.65      wiz      2154: 
                   2155: Some fetch tools are not prepared to support HTTPS by default (for example, the
                   2156: one in NetBSD 6.0), or the one installed by the pkgsrc bootstrap (to avoid an
                   2157: openssl dependency that low in the dependency graph).
                   2158: 
                   2159: Usually you won't notice, because distribution files are mirrored weekly to "
                   2160: ftp.NetBSD.org", but that might not be often enough if you are following
                   2161: pkgsrc-current. In that case, set FETCH_USING in your mk.conf file to "curl" or
                   2162: "wget", which are both compiled with HTTPS support by default. Of course, these
                   2163: tools need to be installed before you can use them this way.
                   2164: 
1.84      wiz      2165: 9.8. How do I tell make fetch to do passive FTP?
1.1       dsieger  2166: 
                   2167: This depends on which utility is used to retrieve distfiles. From bsd.pkg.mk,
                   2168: FETCH_CMD is assigned the first available command from the following list:
                   2169: 
                   2170:   * ${LOCALBASE}/bin/ftp
                   2171: 
                   2172:   * /usr/bin/ftp
                   2173: 
                   2174: On a default NetBSD installation, this will be /usr/bin/ftp, which
                   2175: automatically tries passive connections first, and falls back to active
                   2176: connections if the server refuses to do passive. For the other tools, add the
1.4       rillig   2177: following to your mk.conf file: PASSIVE_FETCH=1.
1.1       dsieger  2178: 
                   2179: Having that option present will prevent /usr/bin/ftp from falling back to
                   2180: active transfers.
                   2181: 
1.84      wiz      2182: 9.9. How to fetch all distfiles at once
1.1       dsieger  2183: 
                   2184: You would like to download all the distfiles in a single batch from work or
                   2185: university, where you can't run a make fetch. There is an archive of distfiles
                   2186: on ftp.NetBSD.org, but downloading the entire directory may not be appropriate.
                   2187: 
                   2188: The answer here is to do a make fetch-list in /usr/pkgsrc or one of its
                   2189: subdirectories, carry the resulting list to your machine at work/school and use
                   2190: it there. If you don't have a NetBSD-compatible ftp(1) (like tnftp) at work,
                   2191: don't forget to set FETCH_CMD to something that fetches a URL:
                   2192: 
                   2193: At home:
                   2194: 
                   2195: % cd /usr/pkgsrc
                   2196: % make fetch-list FETCH_CMD=wget DISTDIR=/tmp/distfiles >/tmp/fetch.sh
                   2197: % scp /tmp/fetch.sh work:/tmp
                   2198: 
                   2199: At work:
                   2200: 
                   2201: % sh /tmp/fetch.sh
                   2202: 
                   2203: then tar up /tmp/distfiles and take it home.
                   2204: 
                   2205: If you have a machine running NetBSD, and you want to get all distfiles (even
                   2206: ones that aren't for your machine architecture), you can do so by using the
                   2207: above-mentioned make fetch-list approach, or fetch the distfiles directly by
                   2208: running:
                   2209: 
                   2210: % make mirror-distfiles
                   2211: 
                   2212: If you even decide to ignore NO_{SRC,BIN}_ON_{FTP,CDROM}, then you can get
                   2213: everything by running:
                   2214: 
                   2215: % make fetch NO_SKIP=yes
                   2216: 
1.84      wiz      2217: 9.10. What does "Don't know how to make /usr/share/tmac/tmac.andoc" mean?
1.1       dsieger  2218: 
                   2219: When compiling the pkgtools/pkg_install package, you get the error from make
                   2220: that it doesn't know how to make /usr/share/tmac/tmac.andoc? This indicates
                   2221: that you don't have installed the "text" set (nroff, ...) from the NetBSD base
                   2222: distribution on your machine. It is recommended to do that to format man pages.
                   2223: 
                   2224: In the case of the pkgtools/pkg_install package, you can get away with setting
1.4       rillig   2225: NOMAN=YES either in the environment or in mk.conf.
1.1       dsieger  2226: 
1.84      wiz      2227: 9.11. What does "Could not find bsd.own.mk" mean?
1.1       dsieger  2228: 
                   2229: You didn't install the compiler set, comp.tgz, when you installed your NetBSD
                   2230: machine. Please get and install it, by extracting it in /:
                   2231: 
                   2232: # cd /
                   2233: # tar --unlink -zxvpf .../comp.tgz
                   2234: 
                   2235: comp.tgz is part of every NetBSD release. Get the one that corresponds to your
                   2236: release (determine via uname -r).
                   2237: 
1.84      wiz      2238: 9.12. Using 'sudo' with pkgsrc
1.1       dsieger  2239: 
                   2240: When installing packages as non-root user and using the just-in-time su(1)
                   2241: feature of pkgsrc, it can become annoying to type in the root password for each
                   2242: required package installed. To avoid this, the sudo package can be used, which
                   2243: does password caching over a limited time. To use it, install sudo (either as
1.4       rillig   2244: binary package or from security/sudo) and then put the following into your
                   2245: mk.conf, somewhere after the definition of the LOCALBASE variable:
1.1       dsieger  2246: 
                   2247: .if exists(${LOCALBASE}/bin/sudo)
                   2248: SU_CMD=        ${LOCALBASE}/bin/sudo /bin/sh -c
                   2249: .endif
                   2250: 
1.84      wiz      2251: 9.13. How do I change the location of configuration files?
1.1       dsieger  2252: 
                   2253: As the system administrator, you can choose where configuration files are
                   2254: installed. The default settings make all these files go into ${PREFIX}/etc or
                   2255: some of its subdirectories; this may be suboptimal depending on your
                   2256: expectations (e.g., a read-only, NFS-exported PREFIX with a need of per-machine
                   2257: configuration of the provided packages).
                   2258: 
                   2259: In order to change the defaults, you can modify the PKG_SYSCONFBASE variable
1.4       rillig   2260: (in mk.conf) to point to your preferred configuration directory; some common
                   2261: examples include /etc or /etc/pkg.
1.1       dsieger  2262: 
                   2263: Furthermore, you can change this value on a per-package basis by setting the
                   2264: PKG_SYSCONFDIR.${PKG_SYSCONFVAR} variable. PKG_SYSCONFVAR's value usually
                   2265: matches the name of the package you would like to modify, that is, the contents
                   2266: of PKGBASE.
                   2267: 
                   2268: Note that after changing these settings, you must rebuild and reinstall any
                   2269: affected packages.
                   2270: 
1.84      wiz      2271: 9.14. Automated security checks
1.1       dsieger  2272: 
                   2273: Please be aware that there can often be bugs in third-party software, and some
                   2274: of these bugs can leave a machine vulnerable to exploitation by attackers. In
                   2275: an effort to lessen the exposure, the NetBSD packages team maintains a database
                   2276: of known-exploits to packages which have at one time been included in pkgsrc.
                   2277: The database can be downloaded automatically, and a security audit of all
1.14      jmcneill 2278: packages installed on a system can take place. To do this, refer to the
                   2279: following two tools (installed as part of the pkgtools/pkg_install package):
1.1       dsieger  2280: 
1.21      snj      2281:  1. pkg_admin fetch-pkg-vulnerabilities, an easy way to download a list of the
                   2282:     security vulnerabilities information. This list is kept up to date by the
1.26      spz      2283:     pkgsrc security team, and is distributed from the NetBSD ftp server:
1.1       dsieger  2284: 
1.26      spz      2285:     ftp://ftp.NetBSD.org/pkgsrc/distfiles/pkg-vulnerabilities
1.1       dsieger  2286: 
1.21      snj      2287:  2. pkg_admin audit, an easy way to audit the current machine, checking each
1.24      wiz      2288:     known vulnerability. If a vulnerable package is installed, it will be shown
                   2289:     by output to stdout, including a description of the type of vulnerability,
                   2290:     and a URL containing more information.
1.1       dsieger  2291: 
1.121   ! sevan    2292: Use of these tools is strongly recommended! See Section 4.1.5, "Checking for
        !          2293: security vulnerabilities in installed packages" for instructions on how to
        !          2294: automate checking and reporting.
        !          2295: 
        !          2296: If this database is installed, pkgsrc builds will use it to perform a security
        !          2297: check before building any package.
1.1       dsieger  2298: 
1.84      wiz      2299: 9.15. Why do some packages ignore my CFLAGS?
1.1       dsieger  2300: 
                   2301: When you add your own preferences to the CFLAGS variable in your mk.conf, these
                   2302: flags are passed in environment variables to the ./configure scripts and to
                   2303: make(1). Some package authors ignore the CFLAGS from the environment variable
                   2304: by overriding them in the Makefiles of their package.
                   2305: 
                   2306: Currently there is no solution to this problem. If you really need the package
                   2307: to use your CFLAGS you should run make patch in the package directory and then
                   2308: inspect any Makefile and Makefile.in for whether they define CFLAGS explicitly.
                   2309: Usually you can remove these lines. But be aware that some "smart" programmers
                   2310: write so bad code that it only works for the specific combination of CFLAGS
                   2311: they have chosen.
                   2312: 
1.84      wiz      2313: 9.16. A package does not build. What shall I do?
1.1       dsieger  2314: 
                   2315:  1. Make sure that your copy of pkgsrc is consistent. A case that occurs often
                   2316:     is that people only update pkgsrc in parts, because of performance reasons.
                   2317:     Since pkgsrc is one large system, not a collection of many small systems,
                   2318:     there are sometimes changes that only work when the whole pkgsrc tree is
                   2319:     updated.
                   2320: 
1.25      wiz      2321:  2. Make sure that you don't have any CVS conflicts. Search for "<<<<<<" or "
                   2322:     >>>>>>" in all your pkgsrc files.
1.1       dsieger  2323: 
1.25      wiz      2324:  3. Make sure that you don't have old copies of the packages extracted. Run 
1.1       dsieger  2325:     make clean clean-depends to verify this.
                   2326: 
1.108     rillig   2327:  4. If you are a package developer who wants to invest some work, have a look
                   2328:     at Chapter 19, Making your package work.
                   2329: 
                   2330:  5. If the problem still exists, write a mail to the pkgsrc-users mailing list.
1.1       dsieger  2331: 
1.84      wiz      2332: 9.17. What does "Makefile appears to contain unresolved cvs/rcs/??? merge
1.1       dsieger  2333: conflicts" mean?
                   2334: 
                   2335: You have modified a file from pkgsrc, and someone else has modified that same
                   2336: file afterwards in the CVS repository. Both changes are in the same region of
                   2337: the file, so when you updated pkgsrc, the cvs command marked the conflicting
                   2338: changes in the file. Because of these markers, the file is no longer a valid
                   2339: Makefile.
                   2340: 
                   2341: Have a look at that file, and if you don't need your local changes anymore, you
                   2342: can remove that file and run cvs -q update -dP in that directory to download
                   2343: the current version.
                   2344: 
                   2345: Part II. The pkgsrc developer's guide
                   2346: 
                   2347: This part of the book deals with creating and modifying packages. It starts
                   2348: with a "HOWTO"-like guide on creating a new package. The remaining chapters are
                   2349: more like a reference manual for pkgsrc.
                   2350: 
                   2351: Table of Contents
                   2352: 
1.6       rillig   2353: 10. Creating a new pkgsrc package from scratch
1.1       dsieger  2354: 
1.6       rillig   2355:     10.1. Common types of packages
1.1       dsieger  2356: 
1.6       rillig   2357:         10.1.1. Perl modules
1.121   ! sevan    2358:         10.1.2. KDE3 & KDE4 applications
1.17      imil     2359:         10.1.3. Python modules and programs
1.1       dsieger  2360: 
1.6       rillig   2361:     10.2. Examples
1.1       dsieger  2362: 
1.6       rillig   2363:         10.2.1. How the www/nvu package came into pkgsrc
1.1       dsieger  2364: 
1.6       rillig   2365: 11. Package components - files, directories and contents
1.1       dsieger  2366: 
1.6       rillig   2367:     11.1. Makefile
                   2368:     11.2. distinfo
                   2369:     11.3. patches/*
1.1       dsieger  2370: 
1.6       rillig   2371:         11.3.1. Structure of a single patch file
                   2372:         11.3.2. Creating patch files
                   2373:         11.3.3. Sources where the patch files come from
                   2374:         11.3.4. Patching guidelines
                   2375:         11.3.5. Feedback to the author
1.1       dsieger  2376: 
1.6       rillig   2377:     11.4. Other mandatory files
                   2378:     11.5. Optional files
1.1       dsieger  2379: 
1.6       rillig   2380:         11.5.1. Files affecting the binary package
                   2381:         11.5.2. Files affecting the build process
                   2382:         11.5.3. Files affecting nothing at all
1.1       dsieger  2383: 
1.6       rillig   2384:     11.6. work*
                   2385:     11.7. files/*
1.1       dsieger  2386: 
1.6       rillig   2387: 12. Programming in Makefiles
1.1       dsieger  2388: 
1.6       rillig   2389:     12.1. Caveats
                   2390:     12.2. Makefile variables
1.1       dsieger  2391: 
1.6       rillig   2392:         12.2.1. Naming conventions
1.1       dsieger  2393: 
1.6       rillig   2394:     12.3. Code snippets
1.1       dsieger  2395: 
1.6       rillig   2396:         12.3.1. Adding things to a list
1.117     sevan    2397:         12.3.2. Echoing a string exactly as-is
1.108     rillig   2398:         12.3.3. Passing CFLAGS to GNU configure scripts
                   2399:         12.3.4. Handling possibly empty variables
1.1       dsieger  2400: 
1.6       rillig   2401: 13. PLIST issues
1.1       dsieger  2402: 
1.6       rillig   2403:     13.1. RCS ID
                   2404:     13.2. Semi-automatic PLIST generation
                   2405:     13.3. Tweaking output of make print-PLIST
                   2406:     13.4. Variable substitution in PLIST
                   2407:     13.5. Man page compression
                   2408:     13.6. Changing PLIST source with PLIST_SRC
                   2409:     13.7. Platform-specific and differing PLISTs
1.86      wiz      2410:     13.8. Build-specific PLISTs
                   2411:     13.9. Sharing directories between packages
1.1       dsieger  2412: 
1.6       rillig   2413: 14. Buildlink methodology
1.1       dsieger  2414: 
1.6       rillig   2415:     14.1. Converting packages to use buildlink3
                   2416:     14.2. Writing buildlink3.mk files
1.1       dsieger  2417: 
1.6       rillig   2418:         14.2.1. Anatomy of a buildlink3.mk file
1.27      wiz      2419:         14.2.2. Updating BUILDLINK_API_DEPENDS.pkg and BUILDLINK_ABI_DEPENDS.
                   2420:             pkg in buildlink3.mk files
1.1       dsieger  2421: 
1.6       rillig   2422:     14.3. Writing builtin.mk files
1.1       dsieger  2423: 
1.6       rillig   2424:         14.3.1. Anatomy of a builtin.mk file
                   2425:         14.3.2. Global preferences for native or pkgsrc software
1.1       dsieger  2426: 
1.6       rillig   2427: 15. The pkginstall framework
1.1       dsieger  2428: 
1.6       rillig   2429:     15.1. Files and directories outside the installation prefix
1.1       dsieger  2430: 
1.6       rillig   2431:         15.1.1. Directory manipulation
                   2432:         15.1.2. File manipulation
1.1       dsieger  2433: 
1.6       rillig   2434:     15.2. Configuration files
1.1       dsieger  2435: 
1.6       rillig   2436:         15.2.1. How PKG_SYSCONFDIR is set
                   2437:         15.2.2. Telling the software where configuration files are
                   2438:         15.2.3. Patching installations
                   2439:         15.2.4. Disabling handling of configuration files
1.1       dsieger  2440: 
1.6       rillig   2441:     15.3. System startup scripts
1.1       dsieger  2442: 
1.6       rillig   2443:         15.3.1. Disabling handling of system startup scripts
1.1       dsieger  2444: 
1.6       rillig   2445:     15.4. System users and groups
                   2446:     15.5. System shells
1.1       dsieger  2447: 
1.6       rillig   2448:         15.5.1. Disabling shell registration
1.1       dsieger  2449: 
1.6       rillig   2450:     15.6. Fonts
1.1       dsieger  2451: 
1.6       rillig   2452:         15.6.1. Disabling automatic update of the fonts databases
1.1       dsieger  2453: 
1.6       rillig   2454: 16. Options handling
1.1       dsieger  2455: 
1.6       rillig   2456:     16.1. Global default options
                   2457:     16.2. Converting packages to use bsd.options.mk
                   2458:     16.3. Option Names
1.7       rillig   2459:     16.4. Determining the options of dependencies
1.1       dsieger  2460: 
1.6       rillig   2461: 17. The build process
1.1       dsieger  2462: 
1.6       rillig   2463:     17.1. Introduction
                   2464:     17.2. Program location
                   2465:     17.3. Directories used during the build process
                   2466:     17.4. Running a phase
                   2467:     17.5. The fetch phase
1.1       dsieger  2468: 
1.6       rillig   2469:         17.5.1. What to fetch and where to get it from
                   2470:         17.5.2. How are the files fetched?
1.1       dsieger  2471: 
1.6       rillig   2472:     17.6. The checksum phase
                   2473:     17.7. The extract phase
                   2474:     17.8. The patch phase
                   2475:     17.9. The tools phase
                   2476:     17.10. The wrapper phase
                   2477:     17.11. The configure phase
                   2478:     17.12. The build phase
                   2479:     17.13. The test phase
                   2480:     17.14. The install phase
                   2481:     17.15. The package phase
                   2482:     17.16. Cleaning up
                   2483:     17.17. Other helpful targets
1.1       dsieger  2484: 
1.6       rillig   2485: 18. Tools needed for building or running
1.1       dsieger  2486: 
1.6       rillig   2487:     18.1. Tools for pkgsrc builds
                   2488:     18.2. Tools needed by packages
                   2489:     18.3. Tools provided by platforms
1.1       dsieger  2490: 
1.6       rillig   2491: 19. Making your package work
1.1       dsieger  2492: 
1.6       rillig   2493:     19.1. General operation
1.1       dsieger  2494: 
1.108     rillig   2495:         19.1.1. How to pull in user-settable variables from mk.conf
                   2496:         19.1.2. User interaction
                   2497:         19.1.3. Handling licenses
                   2498:         19.1.4. Restricted packages
                   2499:         19.1.5. Handling dependencies
                   2500:         19.1.6. Handling conflicts with other packages
                   2501:         19.1.7. Packages that cannot or should not be built
                   2502:         19.1.8. Packages which should not be deleted, once installed
                   2503:         19.1.9. Handling packages with security problems
                   2504:         19.1.10. How to handle incrementing versions when fixing an existing
1.1       dsieger  2505:             package
1.108     rillig   2506:         19.1.11. Substituting variable text in the package files (the SUBST
1.1       dsieger  2507:             framework)
                   2508: 
1.108     rillig   2509:     19.2. The fetch phase
1.1       dsieger  2510: 
1.6       rillig   2511:         19.2.1. Packages whose distfiles aren't available for plain downloading
                   2512:         19.2.2. How to handle modified distfiles with the 'old' name
1.88      tnn      2513:         19.2.3. Packages hosted on github.com
1.1       dsieger  2514: 
1.108     rillig   2515:     19.3. The configure phase
1.1       dsieger  2516: 
1.6       rillig   2517:         19.3.1. Shared libraries - libtool
                   2518:         19.3.2. Using libtool on GNU packages that already support libtool
                   2519:         19.3.3. GNU Autoconf/Automake
                   2520: 
                   2521:     19.4. Programming languages
                   2522: 
                   2523:         19.4.1. C, C++, and Fortran
                   2524:         19.4.2. Java
                   2525:         19.4.3. Packages containing perl scripts
1.41      wiz      2526:         19.4.4. Packages containing shell scripts
                   2527:         19.4.5. Other programming languages
1.6       rillig   2528: 
1.108     rillig   2529:     19.5. The build phase
1.6       rillig   2530: 
                   2531:         19.5.1. Compiling C and C++ code conditionally
                   2532:         19.5.2. How to handle compiler bugs
1.24      wiz      2533:         19.5.3. Undefined reference to "..."
1.6       rillig   2534:         19.5.4. Running out of memory
                   2535: 
1.108     rillig   2536:     19.6. The install phase
1.6       rillig   2537: 
                   2538:         19.6.1. Creating needed directories
                   2539:         19.6.2. Where to install documentation
                   2540:         19.6.3. Installing highscore files
                   2541:         19.6.4. Adding DESTDIR support to packages
                   2542:         19.6.5. Packages with hardcoded paths to other interpreters
                   2543:         19.6.6. Packages installing perl modules
                   2544:         19.6.7. Packages installing info files
                   2545:         19.6.8. Packages installing man pages
1.7       rillig   2546:         19.6.9. Packages installing GConf data files
1.18      mishka   2547:         19.6.10. Packages installing scrollkeeper/rarian data files
1.6       rillig   2548:         19.6.11. Packages installing X11 fonts
                   2549:         19.6.12. Packages installing GTK2 modules
                   2550:         19.6.13. Packages installing SGML or XML data
                   2551:         19.6.14. Packages installing extensions to the MIME database
                   2552:         19.6.15. Packages using intltool
                   2553:         19.6.16. Packages installing startup scripts
                   2554:         19.6.17. Packages installing TeX modules
                   2555:         19.6.18. Packages supporting running binaries in emulation
                   2556:         19.6.19. Packages installing hicolor theme icons
                   2557:         19.6.20. Packages installing desktop files
                   2558: 
                   2559:     19.7. Marking packages as having problems
                   2560: 
                   2561: 20. Debugging
                   2562: 21. Submitting and Committing
                   2563: 
                   2564:     21.1. Submitting binary packages
                   2565:     21.2. Submitting source packages (for non-NetBSD-developers)
                   2566:     21.3. General notes when adding, updating, or removing packages
1.34      wiz      2567:     21.4. Committing: Adding a package to CVS
1.6       rillig   2568:     21.5. Updating a package to a newer version
1.21      snj      2569:     21.6. Renaming a package in pkgsrc
                   2570:     21.7. Moving a package in pkgsrc
1.6       rillig   2571: 
                   2572: 22. Frequently Asked Questions
                   2573: 23. GNOME packaging and porting
                   2574: 
                   2575:     23.1. Meta packages
                   2576:     23.2. Packaging a GNOME application
                   2577:     23.3. Updating GNOME to a newer version
                   2578:     23.4. Patching guidelines
1.1       dsieger  2579: 
1.6       rillig   2580: Chapter 10. Creating a new pkgsrc package from scratch
1.1       dsieger  2581: 
                   2582: Table of Contents
                   2583: 
1.6       rillig   2584: 10.1. Common types of packages
1.1       dsieger  2585: 
1.6       rillig   2586:     10.1.1. Perl modules
1.121   ! sevan    2587:     10.1.2. KDE3 & KDE4 applications
1.17      imil     2588:     10.1.3. Python modules and programs
1.1       dsieger  2589: 
1.6       rillig   2590: 10.2. Examples
1.1       dsieger  2591: 
1.6       rillig   2592:     10.2.1. How the www/nvu package came into pkgsrc
1.1       dsieger  2593: 
                   2594: When you find a package that is not yet in pkgsrc, you most likely have a URL
                   2595: from where you can download the source code. Starting with this URL, creating a
                   2596: package involves only a few steps.
                   2597: 
                   2598:  1. First, install the packages pkgtools/url2pkg and pkgtools/pkglint.
                   2599: 
                   2600:  2. Then, choose one of the top-level directories as the category in which you
                   2601:     want to place your package. You can also create a directory of your own
                   2602:     (maybe called local). In that category directory, create another directory
                   2603:     for your package and change into it.
                   2604: 
                   2605:  3. Run the program url2pkg, which will ask you for a URL. Enter the URL of the
                   2606:     distribution file (in most cases a .tar.gz file) and watch how the basic
                   2607:     ingredients of your package are created automatically. The distribution
                   2608:     file is extracted automatically to fill in some details in the Makefile
                   2609:     that would otherwise have to be done manually.
                   2610: 
                   2611:  4. Examine the extracted files to determine the dependencies of your package.
                   2612:     Ideally, this is mentioned in some README file, but things may differ. For
                   2613:     each of these dependencies, look where it exists in pkgsrc, and if there is
                   2614:     a file called buildlink3.mk in that directory, add a line to your package
                   2615:     Makefile which includes that file just before the last line. If the
1.26      spz      2616:     buildlink3.mk file does not exist, it must be created first. The
                   2617:     buildlink3.mk file makes sure that the package's include files and
                   2618:     libraries are provided.
                   2619: 
                   2620:     If you just need binaries from a package, add a DEPENDS line to the
                   2621:     Makefile, which specifies the version of the dependency and where it can be
                   2622:     found in pkgsrc. This line should be placed in the third paragraph. If the
1.1       dsieger  2623:     dependency is only needed for building the package, but not when using it,
                   2624:     use BUILD_DEPENDS instead of DEPENDS. Your package may then look like this:
                   2625: 
                   2626:     [...]
                   2627: 
1.66      asau     2628:     BUILD_DEPENDS+= libxslt-[0-9]*:../../textproc/libxslt
1.1       dsieger  2629:     DEPENDS+=       screen-[0-9]*:../../misc/screen
                   2630:     DEPENDS+=       screen>=4.0:../../misc/screen
                   2631: 
                   2632:     [...]
                   2633: 
                   2634:     .include "../../category/package/buildlink3.mk"
                   2635:     .include "../../devel/glib2/buildlink3.mk"
                   2636:     .include "../../mk/bsd.pkg.mk"
                   2637: 
                   2638:  5. Run pkglint to see what things still need to be done to make your package a
                   2639:     "good" one. If you don't know what pkglint's warnings want to tell you, try
                   2640:     pkglint --explain or pkglint -e, which outputs additional explanations.
                   2641: 
                   2642:  6. In many cases the package is not yet ready to build. You can find
1.6       rillig   2643:     instructions for the most common cases in the next section, Section 10.1,
1.1       dsieger  2644:     "Common types of packages". After you have followed the instructions over
                   2645:     there, you can hopefully continue here.
                   2646: 
                   2647:  7. Run bmake clean to clean the working directory from the extracted files.
                   2648:     Besides these files, a lot of cache files and other system information has
                   2649:     been saved in the working directory, which may become wrong after you
                   2650:     edited the Makefile.
                   2651: 
                   2652:  8. Now, run bmake to build the package. For the various things that can go
1.6       rillig   2653:     wrong in this phase, consult Chapter 19, Making your package work.
1.1       dsieger  2654: 
1.25      wiz      2655:  9. When the package builds fine, the next step is to install the package. Run 
1.1       dsieger  2656:     bmake install and hope that everything works.
                   2657: 
                   2658: 10. Up to now, the file PLIST, which contains a list of the files that are
                   2659:     installed by the package, is nearly empty. Run bmake print-PLIST >PLIST to
                   2660:     generate a probably correct list. Check the file using your preferred text
                   2661:     editor to see if the list of files looks plausible.
                   2662: 
                   2663: 11. Run pkglint again to see if the generated PLIST contains garbage or not.
                   2664: 
                   2665: 12. When you ran bmake install, the package has been registered in the database
                   2666:     of installed files, but with an empty list of files. To fix this, run bmake
                   2667:     deinstall and bmake install again. Now the package is registered with the
                   2668:     list of files from PLIST.
                   2669: 
                   2670: 13. Run bmake package to create a binary package from the set of installed
                   2671:     files.
                   2672: 
1.6       rillig   2673: 10.1. Common types of packages
1.1       dsieger  2674: 
1.6       rillig   2675: 10.1.1. Perl modules
1.1       dsieger  2676: 
                   2677: Simple Perl modules are handled automatically by url2pkg, including
                   2678: dependencies.
                   2679: 
1.121   ! sevan    2680: 10.1.2. KDE3 & KDE4 applications
1.1       dsieger  2681: 
1.66      asau     2682: KDE3 applications should always include meta-pkgs/kde3/kde3.mk, which contains
1.121   ! sevan    2683: numerous settings that are typical of KDE3 packages and KDE4 applications
        !          2684: should always include meta-pkgs/kde4/kde4.mk, respectively.
1.1       dsieger  2685: 
1.17      imil     2686: 10.1.3. Python modules and programs
                   2687: 
                   2688: Python modules and programs packages are easily created using a set of
                   2689: predefined variables.
                   2690: 
1.63      wiz      2691: If some Python versions are not supported by the software, set the
                   2692: PYTHON_VERSIONS_INCOMPATIBLE variable to the Python versions that are not
                   2693: supported, e.g.
1.17      imil     2694: 
1.93      sevan    2695: PYTHON_VERSIONS_INCOMPATIBLE=       27
1.17      imil     2696: 
1.103     wiz      2697: If the packaged software is a Python module, include one of ../../lang/python/
                   2698: egg.mk, ../../lang/python/distutils.mk, or ../../lang/python/extension.mk.
                   2699: 
                   2700: Most Python packages use either "distutils" or easy-setup/setuptools ("eggs").
                   2701: if the packaged software is using setuptools, you only need to include "../../
                   2702: lang/python/egg.mk". Otherwise, if the software uses "distutils", include "..
                   2703: /../lang/python/distutils.mk". so pkgsrc will use this framework. "distutils"
                   2704: uses a script called setup.py, if the "distutils" driver is not called
                   2705: setup.py, set the PYSETUP variable to the name of the script.
                   2706: 
                   2707: Either way, the package directory should be called "py-software" and PKGNAME
                   2708: should be set to "${PYPKGPREFIX}-${DISTNAME}", e.g.
1.17      imil     2709: 
                   2710: DISTNAME=   foopymodule-1.2.10
                   2711: PKGNAME=    ${PYPKGPREFIX}-${DISTNAME}
                   2712: 
1.63      wiz      2713: If it is an application, include "../../lang/python/application.mk". In order
                   2714: to correctly set the path to the Python interpreter, use the REPLACE_PYTHON
                   2715: variable and set it to the list of files (paths relative to WRKSRC) that must
                   2716: be corrected. For example:
1.17      imil     2717: 
1.63      wiz      2718: REPLACE_PYTHON=   *.py
1.17      imil     2719: 
1.63      wiz      2720: Some Python modules have separate distributions for Python-2.x and Python-3.x
                   2721: support. In pkgsrc this is handled by the versioned_dependencies.mk file. Set
                   2722: PYTHON_VERSIONED_DEPENDENCIES to the list of packages that should be depended
                   2723: upon and include "../../lang/python/versioned_dependencies.mk", then the pkgsrc
                   2724: infrastructure will depend on the appropriate package version. For example:
1.17      imil     2725: 
1.110     wiz      2726: PYTHON_VERSIONED_DEPENDENCIES=dateutil
1.63      wiz      2727: 
                   2728: Look inside versioned_dependencies.mk for a list of supported packages.
1.17      imil     2729: 
1.6       rillig   2730: 10.2. Examples
1.1       dsieger  2731: 
1.6       rillig   2732: 10.2.1. How the www/nvu package came into pkgsrc
1.1       dsieger  2733: 
1.6       rillig   2734: 10.2.1.1. The initial package
1.1       dsieger  2735: 
                   2736: Looking at the file pkgsrc/doc/TODO, I saw that the "nvu" package has not yet
                   2737: been imported into pkgsrc. As the description says it has to do with the web,
                   2738: the obvious choice for the category is "www".
                   2739: 
                   2740: $ mkdir www/nvu
                   2741: $ cd www/nvu
                   2742: 
                   2743: The web site says that the sources are available as a tar file, so I fed that
                   2744: URL to the url2pkg program:
                   2745: 
                   2746: $ url2pkg http://cvs.nvu.com/download/nvu-1.0-sources.tar.bz2
                   2747: 
                   2748: My editor popped up, and I added a PKGNAME line below the DISTNAME line, as the
                   2749: package name should not have the word "sources" in it. I also filled in the
                   2750: MAINTAINER, HOMEPAGE and COMMENT fields. Then the package Makefile looked like
                   2751: that:
                   2752: 
1.121   ! sevan    2753: # $NetBSD $
1.1       dsieger  2754: #
                   2755: 
                   2756: DISTNAME=       nvu-1.0-sources
                   2757: PKGNAME=        nvu-1.0
                   2758: CATEGORIES=     www
                   2759: MASTER_SITES=   http://cvs.nvu.com/download/
                   2760: EXTRACT_SUFX=   .tar.bz2
                   2761: 
                   2762: MAINTAINER=     rillig@NetBSD.org
                   2763: HOMEPAGE=       http://cvs.nvu.com/
                   2764: COMMENT=        Web Authoring System
                   2765: 
                   2766: # url2pkg-marker (please do not remove this line.)
                   2767: .include "../../mk/bsd.pkg.mk"
                   2768: 
1.121   ! sevan    2769: On the first line of output above, an artificial space has been added betweeen
        !          2770: NetBSD and $, this is a workaround to prevent CVS expanding to the filename of
        !          2771: the guide.
        !          2772: 
1.1       dsieger  2773: Then, I quit the editor and watched pkgsrc downloading a large source archive:
                   2774: 
                   2775: url2pkg> Running "make makesum" ...
                   2776: => Required installed package digest>=20010302: digest-20060826 found
                   2777: => Fetching nvu-1.0-sources.tar.bz2
                   2778: Requesting http://cvs.nvu.com/download/nvu-1.0-sources.tar.bz2
                   2779: 100% |*************************************| 28992 KB  150.77 KB/s00:00 ETA
                   2780: 29687976 bytes retrieved in 03:12 (150.77 KB/s)
                   2781: url2pkg> Running "make extract" ...
                   2782: => Required installed package digest>=20010302: digest-20060826 found
                   2783: => Checksum SHA1 OK for nvu-1.0-sources.tar.bz2
                   2784: => Checksum RMD160 OK for nvu-1.0-sources.tar.bz2
                   2785: work.bacc -> /tmp/roland/pkgsrc/www/nvu/work.bacc
                   2786: ===> Installing dependencies for nvu-1.0
                   2787: ===> Overriding tools for nvu-1.0
                   2788: ===> Extracting for nvu-1.0
                   2789: url2pkg> Adjusting the Makefile.
                   2790: 
                   2791: Remember to correct CATEGORIES, HOMEPAGE, COMMENT, and DESCR when you're done!
                   2792: 
                   2793: Good luck! (See pkgsrc/doc/pkgsrc.txt for some more help :-)
                   2794: 
1.6       rillig   2795: 10.2.1.2. Fixing all kinds of problems to make the package work
1.1       dsieger  2796: 
                   2797: Now that the package has been extracted, let's see what's inside it. The
                   2798: package has a README.txt, but that only says something about mozilla, so it's
                   2799: probably useless for seeing what dependencies this package has. But since there
                   2800: is a GNU configure script in the package, let's hope that it will complain
                   2801: about everything it needs.
                   2802: 
                   2803: $ bmake
                   2804: => Required installed package digest>=20010302: digest-20060826 found
                   2805: => Checksum SHA1 OK for nvu-1.0-sources.tar.bz2
                   2806: => Checksum RMD160 OK for nvu-1.0-sources.tar.bz2
                   2807: ===> Patching for nvu-1.0
                   2808: ===> Creating toolchain wrappers for nvu-1.0
                   2809: ===> Configuring for nvu-1.0
                   2810: [...]
                   2811: configure: error: Perl 5.004 or higher is required.
                   2812: [...]
                   2813: WARNING: Please add USE_TOOLS+=perl to the package Makefile.
                   2814: [...]
                   2815: 
                   2816: That worked quite well. So I opened the package Makefile in my editor, and
                   2817: since it already has a USE_TOOLS line, I just appended "perl" to it. Since the
                   2818: dependencies of the package have changed now, and since a perl wrapper is
                   2819: automatically installed in the "tools" phase, I need to build the package from
                   2820: scratch.
                   2821: 
                   2822: $ bmake clean
                   2823: ===> Cleaning for nvu-1.0
                   2824: $ bmake
                   2825: [...]
                   2826: *** /tmp/roland/pkgsrc/www/nvu/work.bacc/.tools/bin/make is not \
                   2827: GNU Make.  You will not be able to build Mozilla without GNU Make.
                   2828: [...]
                   2829: 
                   2830: So I added "gmake" to the USE_TOOLS line and tried again (from scratch).
                   2831: 
                   2832: [...]
                   2833: checking for GTK - version >= 1.2.0... no
                   2834: *** Could not run GTK test program, checking why...
                   2835: [...]
                   2836: 
                   2837: Now to the other dependencies. The first question is: Where is the GTK package
                   2838: hidden in pkgsrc?
                   2839: 
                   2840: $ echo ../../*/gtk*
                   2841: [many packages ...]
                   2842: $ echo ../../*/gtk
                   2843: ../../x11/gtk
                   2844: $ echo ../../*/gtk2
                   2845: ../../x11/gtk2
                   2846: $ echo ../../*/gtk2/bui*
                   2847: ../../x11/gtk2/buildlink3.mk
                   2848: 
                   2849: The first try was definitely too broad. The second one had exactly one result,
                   2850: which is very good. But there is one pitfall with GNOME packages. Before GNOME
                   2851: 2 had been released, there were already many GNOME 1 packages in pkgsrc. To be
                   2852: able to continue to use these packages, the GNOME 2 packages were imported as
                   2853: separate packages, and their names usually have a "2" appended. So I checked
                   2854: whether this was the case here, and indeed it was.
                   2855: 
                   2856: Since the GTK2 package has a buildlink3.mk file, adding the dependency is very
                   2857: easy. I just inserted an .include line before the last line of the package
                   2858: Makefile, so that it now looks like this:
                   2859: 
                   2860: [...]
                   2861: .include "../../x11/gtk2/buildlink3.mk"
                   2862: .include "../../mk/bsd.pkg.mk
                   2863: 
                   2864: After another bmake clean && bmake, the answer was:
                   2865: 
                   2866: [...]
                   2867: checking for gtk-config... /home/roland/pkg/bin/gtk-config
                   2868: checking for GTK - version >= 1.2.0... no
                   2869: *** Could not run GTK test program, checking why...
                   2870: *** The test program failed to compile or link. See the file config.log for the
                   2871: *** exact error that occured. This usually means GTK was incorrectly installed
                   2872: *** or that you have moved GTK since it was installed. In the latter case, you
                   2873: *** may want to edit the gtk-config script: /home/roland/pkg/bin/gtk-config
                   2874: configure: error: Test for GTK failed.
                   2875: [...]
                   2876: 
                   2877: In this particular case, the assumption that "every package prefers GNOME 2"
                   2878: had been wrong. The first of the lines above told me that this package really
                   2879: wanted to have the GNOME 1 version of GTK. If the package had looked for GTK2,
                   2880: it would have looked for pkg-config instead of gtk-config. So I changed the x11
                   2881: /gtk2 to x11/gtk in the package Makefile, and tried again.
                   2882: 
                   2883: [...]
1.59      jnemeth  2884: cc -o xpidl.o -c -DOSTYPE=\"NetBSD3\" -DOSARCH=\"NetBSD\"  [...]
1.1       dsieger  2885: In file included from xpidl.c:42:
                   2886: xpidl.h:53:24: libIDL/IDL.h: No such file or directory
                   2887: In file included from xpidl.c:42:
                   2888: xpidl.h:132: error: parse error before "IDL_ns"
                   2889: [...]
                   2890: 
                   2891: The package still does not find all of its dependencies. Now the question is:
                   2892: Which package provides the libIDL/IDL.h header file?
                   2893: 
                   2894: $ echo ../../*/*idl*
                   2895: ../../devel/py-idle ../../wip/idled ../../x11/acidlaunch
                   2896: $ echo ../../*/*IDL*
                   2897: ../../net/libIDL
                   2898: 
                   2899: Let's take the one from the second try. So I included the ../../net/libIDL/
                   2900: buildlink3.mk file and tried again. But the error didn't change. After digging
                   2901: through some of the code, I concluded that the build process of the package was
                   2902: broken and couldn't have ever worked, but since the Mozilla source tree is
                   2903: quite large, I didn't want to fix it. So I added the following to the package
                   2904: Makefile and tried again:
                   2905: 
                   2906: CPPFLAGS+=              -I${BUILDLINK_PREFIX.libIDL}/include/libIDL-2.0
                   2907: BUILDLINK_TRANSFORM+=   -l:IDL:IDL-2
                   2908: 
                   2909: The latter line is needed because the package expects the library libIDL.so,
                   2910: but only libIDL-2.so is available. So I told the compiler wrapper to rewrite
                   2911: that on the fly.
                   2912: 
                   2913: The next problem was related to a recent change of the FreeType interface. I
                   2914: looked up in www/seamonkey which patch files were relevant for this issue and
                   2915: copied them to the patches directory. Then I retried, fixed the patches so that
                   2916: they applied cleanly and retried again. This time, everything worked.
                   2917: 
1.6       rillig   2918: 10.2.1.3. Installing the package
1.1       dsieger  2919: 
                   2920: $ bmake CHECK_FILES=no install
                   2921: [...]
                   2922: $ bmake print-PLIST >PLIST
                   2923: $ bmake deinstall
                   2924: $ bmake install
                   2925: 
1.6       rillig   2926: Chapter 11. Package components - files, directories and contents
1.1       dsieger  2927: 
                   2928: Table of Contents
                   2929: 
1.6       rillig   2930: 11.1. Makefile
                   2931: 11.2. distinfo
                   2932: 11.3. patches/*
                   2933: 
                   2934:     11.3.1. Structure of a single patch file
                   2935:     11.3.2. Creating patch files
                   2936:     11.3.3. Sources where the patch files come from
                   2937:     11.3.4. Patching guidelines
                   2938:     11.3.5. Feedback to the author
                   2939: 
                   2940: 11.4. Other mandatory files
                   2941: 11.5. Optional files
                   2942: 
                   2943:     11.5.1. Files affecting the binary package
                   2944:     11.5.2. Files affecting the build process
                   2945:     11.5.3. Files affecting nothing at all
1.1       dsieger  2946: 
1.6       rillig   2947: 11.6. work*
                   2948: 11.7. files/*
1.1       dsieger  2949: 
                   2950: Whenever you're preparing a package, there are a number of files involved which
                   2951: are described in the following sections.
                   2952: 
1.6       rillig   2953: 11.1. Makefile
1.1       dsieger  2954: 
                   2955: Building, installation and creation of a binary package are all controlled by
                   2956: the package's Makefile. The Makefile describes various things about a package,
                   2957: for example from where to get it, how to configure, build, and install it.
                   2958: 
                   2959: A package Makefile contains several sections that describe the package.
                   2960: 
                   2961: In the first section there are the following variables, which should appear
                   2962: exactly in the order given here. The order and grouping of the variables is
                   2963: mostly historical and has no further meaning.
                   2964: 
                   2965:   * DISTNAME is the basename of the distribution file to be downloaded from the
                   2966:     package's website.
                   2967: 
1.66      asau     2968:   * PKGNAME is the name of the package, as used by pkgsrc. You need to provide
                   2969:     it if DISTNAME (which is the default) is not a good name for the package in
                   2970:     pkgsrc or DISTNAME is not provided (no distribution file is required).
                   2971:     Usually it is the pkgsrc directory name together with the version number.
                   2972:     It must match the regular expression ^[A-Za-z0-9][A-Za-z0-9-_.+]*$, that
                   2973:     is, it starts with a letter or digit, and contains only letters, digits,
                   2974:     dashes, underscores, dots and plus signs.
1.1       dsieger  2975: 
                   2976:   * CATEGORIES is a list of categories which the package fits in. You can
                   2977:     choose any of the top-level directories of pkgsrc for it.
                   2978: 
                   2979:     Currently the following values are available for CATEGORIES. If more than
                   2980:     one is used, they need to be separated by spaces:
                   2981: 
                   2982:     archivers     cross         geography     meta-pkgs     security
                   2983:     audio         databases     graphics      misc          shells
                   2984:     benchmarks    devel         ham           multimedia    sysutils
                   2985:     biology       editors       inputmethod   net           textproc
                   2986:     cad           emulators     lang          news          time
                   2987:     chat          finance       mail          parallel      wm
                   2988:     comms         fonts         math          pkgtools      www
                   2989:     converters    games         mbone         print         x11
                   2990: 
                   2991:   * MASTER_SITES, DYNAMIC_MASTER_SITES, DIST_SUBDIR, EXTRACT_SUFX and DISTFILES
1.6       rillig   2992:     are discussed in detail in Section 17.5, "The fetch phase".
1.1       dsieger  2993: 
                   2994: The second section contains information about separately downloaded patches, if
                   2995: any.
                   2996: 
                   2997:   * PATCHFILES: Name(s) of additional files that contain distribution patches.
                   2998:     There is no default. pkgsrc will look for them at PATCH_SITES. They will
                   2999:     automatically be uncompressed before patching if the names end with .gz or
                   3000:     .Z.
                   3001: 
                   3002:   * PATCH_SITES: Primary location(s) for distribution patch files (see
1.80      wiz      3003:     PATCHFILES above) if not found locally.
                   3004: 
                   3005:   * PATCH_DIST_STRIP: an argument to patch(1) that sets the pathname strip
                   3006:     count to help find the correct files to patch. It defaults to -p0.
1.1       dsieger  3007: 
                   3008: The third section contains the following variables.
                   3009: 
                   3010:   * MAINTAINER is the email address of the person who feels responsible for
                   3011:     this package, and who is most likely to look at problems or questions
                   3012:     regarding this package which have been reported with send-pr(1). Other
1.14      jmcneill 3013:     developers may contact the MAINTAINER before making changes to the package,
                   3014:     but are not required to do so. When packaging a new program, set MAINTAINER
                   3015:     to yourself. If you really can't maintain the package for future updates,
                   3016:     set it to <pkgsrc-users@NetBSD.org>.
                   3017: 
                   3018:   * OWNER should be used instead of MAINTAINER when you do not want other
                   3019:     developers to update or change the package without contacting you first. A
                   3020:     package Makefile should contain one of MAINTAINER or OWNER, but not both.
1.1       dsieger  3021: 
                   3022:   * HOMEPAGE is a URL where users can find more information about the package.
                   3023: 
                   3024:   * COMMENT is a one-line description of the package (should not include the
                   3025:     package name).
                   3026: 
                   3027: Other variables that affect the build:
                   3028: 
                   3029:   * WRKSRC: The directory where the interesting distribution files of the
                   3030:     package are found. The default is ${WRKDIR}/${DISTNAME}, which works for
                   3031:     most packages.
                   3032: 
                   3033:     If a package doesn't create a subdirectory for itself (most GNU software
                   3034:     does, for instance), but extracts itself in the current directory, you
                   3035:     should set WRKSRC=${WRKDIR}.
                   3036: 
                   3037:     If a package doesn't create a subdirectory with the name of DISTNAME but
                   3038:     some different name, set WRKSRC to point to the proper name in ${WRKDIR},
                   3039:     for example WRKSRC=${WRKDIR}/${DISTNAME}/unix. See lang/tcl and x11/tk for
                   3040:     other examples.
                   3041: 
                   3042:     The name of the working directory created by pkgsrc is taken from the
                   3043:     WRKDIR_BASENAME variable. By default, its value is work. If you want to use
                   3044:     the same pkgsrc tree for building different kinds of binary packages, you
                   3045:     can change the variable according to your needs. Two other variables handle
                   3046:     common cases of setting WRKDIR_BASENAME individually. If OBJHOSTNAME is
1.4       rillig   3047:     defined in mk.conf, the first component of the host's name is attached to
                   3048:     the directory name. If OBJMACHINE is defined, the platform name is
1.1       dsieger  3049:     attached, which might look like work.i386 or work.sparc.
                   3050: 
                   3051: Please pay attention to the following gotchas:
                   3052: 
                   3053:   * Add MANCOMPRESSED if man pages are installed in compressed form by the
                   3054:     package. For packages using BSD-style makefiles which honor MANZ, there is
                   3055:     MANCOMPRESSED_IF_MANZ.
                   3056: 
                   3057:   * Replace /usr/local with "${PREFIX}" in all files (see patches, below).
                   3058: 
1.6       rillig   3059:   * If the package installs any info files, see Section 19.6.7, "Packages
1.1       dsieger  3060:     installing info files".
                   3061: 
1.6       rillig   3062: 11.2. distinfo
1.1       dsieger  3063: 
                   3064: The distinfo file contains the message digest, or checksum, of each distfile
                   3065: needed for the package. This ensures that the distfiles retrieved from the
                   3066: Internet have not been corrupted during transfer or altered by a malign force
1.108     rillig   3067: to introduce a security hole. To provide maximum security, all distfiles are
                   3068: protected using three different message digest algorithms (SHA1, RMD160,
                   3069: SHA512), as well as the file size.
1.1       dsieger  3070: 
                   3071: The distinfo file also contains the checksums for all the patches found in the
1.6       rillig   3072: patches directory (see Section 11.3, "patches/*").
1.1       dsieger  3073: 
1.108     rillig   3074: To regenerate the distinfo file, use the make distinfo command.
1.1       dsieger  3075: 
                   3076: Some packages have different sets of distfiles depending on the platform, for
1.24      wiz      3077: example lang/openjdk7. These are kept in the same distinfo file and care should
                   3078: be taken when upgrading such a package to ensure distfile information is not
                   3079: lost.
1.1       dsieger  3080: 
1.6       rillig   3081: 11.3. patches/*
1.1       dsieger  3082: 
1.108     rillig   3083: Some packages don't work out-of-the box on the various platforms that are
                   3084: supported by pkgsrc. These packages need to be patched to make them work. The
                   3085: patch files can be found in the patches/ directory.
1.1       dsieger  3086: 
                   3087: In the patch phase, these patches are applied to the files in WRKSRC directory
1.25      wiz      3088: after extracting them, in alphabetic order.
1.1       dsieger  3089: 
1.6       rillig   3090: 11.3.1. Structure of a single patch file
1.1       dsieger  3091: 
                   3092: The patch-* files should be in diff -bu format, and apply without a fuzz to
                   3093: avoid problems. (To force patches to apply with fuzz you can set
                   3094: PATCH_FUZZ_FACTOR=-F2). Furthermore, each patch should contain only changes for
                   3095: a single file, and no file should be patched by more than one patch file. This
                   3096: helps to keep future modifications simple.
                   3097: 
                   3098: Each patch file is structured as follows: In the first line, there is the RCS
                   3099: Id of the patch itself. The second line should be empty for aesthetic reasons.
                   3100: After that, there should be a comment for each change that the patch does.
                   3101: There are a number of standard cases:
                   3102: 
                   3103:   * Patches for commonly known vulnerabilities should mention the vulnerability
                   3104:     ID (CAN, CVE).
                   3105: 
                   3106:   * Patches that change source code should mention the platform and other
                   3107:     environment (for example, the compiler) that the patch is needed for.
                   3108: 
1.108     rillig   3109: The patch should be commented so that any developer who knows the code of the
                   3110: application can make some use of the patch. Special care should be taken for
                   3111: the upstream developers, since we generally want that they accept our patches,
                   3112: so we have less work in the future.
1.1       dsieger  3113: 
1.6       rillig   3114: 11.3.2. Creating patch files
1.1       dsieger  3115: 
                   3116: One important thing to mention is to pay attention that no RCS IDs get stored
                   3117: in the patch files, as these will cause problems when later checked into the
                   3118: NetBSD CVS tree. Use the pkgdiff command from the pkgtools/pkgdiff package to
                   3119: avoid these problems.
                   3120: 
                   3121: For even more automation, we recommend using mkpatches from the same package to
                   3122: make a whole set of patches. You just have to backup files before you edit them
1.25      wiz      3123: to filename.orig, e.g. with cp -p filename filename.orig or, easier, by using 
1.1       dsieger  3124: pkgvi again from the same package. If you upgrade a package this way, you can
1.25      wiz      3125: easily compare the new set of patches with the previously existing one with 
                   3126: patchdiff. The files in patches are replaced by new files, so carefully check
                   3127: if you want to take all the changes.
1.1       dsieger  3128: 
                   3129: When you have finished a package, remember to generate the checksums for the
1.6       rillig   3130: patch files by using the make makepatchsum command, see Section 11.2,
1.1       dsieger  3131: "distinfo".
                   3132: 
                   3133: When adding a patch that corrects a problem in the distfile (rather than e.g.
                   3134: enforcing pkgsrc's view of where man pages should go), send the patch as a bug
                   3135: report to the maintainer. This benefits non-pkgsrc users of the package, and
                   3136: usually makes it possible to remove the patch in future version.
                   3137: 
1.25      wiz      3138: The file names of the patch files are usually of the form patch-
                   3139: path_to_file__with__underscores.c. Many packages still use the previous
                   3140: convention patch-[a-z][a-z], but new patches should be of the form containing
                   3141: the filename. mkpatches included in pkgtools/pkgdiff takes care of the name
                   3142: automatically.
1.2       rillig   3143: 
1.6       rillig   3144: 11.3.3. Sources where the patch files come from
1.1       dsieger  3145: 
                   3146: If you want to share patches between multiple packages in pkgsrc, e.g. because
                   3147: they use the same distfiles, set PATCHDIR to the path where the patch files can
                   3148: be found, e.g.:
                   3149: 
                   3150: PATCHDIR= ${.CURDIR}/../xemacs/patches
                   3151: 
                   3152: Patch files that are distributed by the author or other maintainers can be
                   3153: listed in PATCHFILES.
                   3154: 
                   3155: If it is desired to store any patches that should not be committed into pkgsrc,
                   3156: they can be kept outside the pkgsrc tree in the $LOCALPATCHES directory. The
                   3157: directory tree there is expected to have the same "category/package" structure
                   3158: as pkgsrc, and patches are expected to be stored inside these dirs (also known
                   3159: as $LOCALPATCHES/$PKGPATH). For example, if you want to keep a private patch
                   3160: for pkgsrc/graphics/png, keep it in $LOCALPATCHES/graphics/png/mypatch. All
                   3161: files in the named directory are expected to be patch files, and they are
                   3162: applied after pkgsrc patches are applied.
                   3163: 
1.6       rillig   3164: 11.3.4. Patching guidelines
1.1       dsieger  3165: 
                   3166: When fixing a portability issue in the code do not use preprocessor magic to
                   3167: check for the current operating system nor platform. Doing so hurts portability
                   3168: to other platforms because the OS-specific details are not abstracted
                   3169: appropriately.
                   3170: 
                   3171: The general rule to follow is: instead of checking for the operating system the
                   3172: application is being built on, check for the specific features you need. For
                   3173: example, instead of assuming that kqueue is available under NetBSD and using
                   3174: the __NetBSD__ macro to conditionalize kqueue support, add a check that detects
                   3175: kqueue itself ? yes, this generally involves patching the configure script.
                   3176: There is absolutely nothing that prevents some OSes from adopting interfaces
                   3177: from other OSes (e.g. Linux implementing kqueue), something that the above
                   3178: checks cannot take into account.
                   3179: 
                   3180: Of course, checking for features generally involves more work on the
                   3181: developer's side, but the resulting changes are cleaner and there are chances
                   3182: they will work on many other platforms. Not to mention that there are higher
                   3183: chances of being later integrated into the mainstream sources. Remember: It
                   3184: doesn't work unless it is right!
                   3185: 
                   3186: Some typical examples:
                   3187: 
1.6       rillig   3188: Table 11.1. Patching examples
1.1       dsieger  3189: 
                   3190: +-------------------------------------------------------------------------------------------+
                   3191: |  Where  |        Incorrect         |                       Correct                        |
                   3192: |---------+--------------------------+------------------------------------------------------|
                   3193: |         |case ${target_os} in      |                                                      |
                   3194: |configure|netbsd*) have_kvm=yes ;;  |AC_CHECK_LIB(kvm, kvm_open, have_kvm=yes, have_kvm=no)|
                   3195: |script   |*)       have_kvm=no  ;;  |                                                      |
                   3196: |         |esac                      |                                                      |
                   3197: |---------+--------------------------+------------------------------------------------------|
1.2       rillig   3198: |C source |#if defined(__NetBSD__)   |#if defined(HAVE_SYS_EVENT_H)                         |
                   3199: |file     |#  include <sys/event.h>  |#  include <sys/event.h>                              |
                   3200: |         |#endif                    |#endif                                                |
1.1       dsieger  3201: |---------+--------------------------+------------------------------------------------------|
                   3202: |         |int                       |int                                                   |
                   3203: |         |monitor_file(...)         |monitor_file(...)                                     |
                   3204: |         |{                         |{                                                     |
                   3205: |         |#if defined(__NetBSD__)   |#if defined(HAVE_KQUEUE)                              |
                   3206: |C source |        int fd = kqueue();|        int fd = kqueue();                            |
                   3207: |file     |        ...               |        ...                                           |
                   3208: |         |#else                     |#else                                                 |
                   3209: |         |        ...               |        ...                                           |
                   3210: |         |#endif                    |#endif                                                |
                   3211: |         |}                         |}                                                     |
                   3212: +-------------------------------------------------------------------------------------------+
                   3213: 
                   3214: 
                   3215: For more information, please read the Making packager-friendly software article
                   3216: (part 1, part 2). It summarizes multiple details on how to make software easier
                   3217: to package; all the suggestions in it were collected from our experience in
                   3218: pkgsrc work, so they are possibly helpful when creating patches too.
                   3219: 
1.6       rillig   3220: 11.3.5. Feedback to the author
1.1       dsieger  3221: 
                   3222: Always, always, always feed back any portability fixes or improvements you do
                   3223: to a package to the mainstream developers. This is the only way to get their
                   3224: attention on portability issues and to ensure that future versions can be built
                   3225: out-of-the box on NetBSD. Furthermore, any user that gets newer distfiles will
                   3226: get the fixes straight from the packaged code.
                   3227: 
                   3228: This generally involves cleaning up the patches (because sometimes the patches
1.41      wiz      3229: that are added to pkgsrc are quick hacks), filing bug reports in the
1.1       dsieger  3230: appropriate trackers for the projects and working with the mainstream authors
                   3231: to accept your changes. It is extremely important that you do it so that the
                   3232: packages in pkgsrc are kept simple and thus further changes can be done without
                   3233: much hassle.
                   3234: 
1.25      wiz      3235: When you have done this, please add a URL to the upstream bug report to the
                   3236: patch comment.
                   3237: 
1.1       dsieger  3238: Support the idea of free software!
                   3239: 
1.6       rillig   3240: 11.4. Other mandatory files
1.1       dsieger  3241: 
                   3242: DESCR
                   3243: 
                   3244:     A multi-line description of the piece of software. This should include any
                   3245:     credits where they are due. Please bear in mind that others do not share
                   3246:     your sense of humour (or spelling idiosyncrasies), and that others will
                   3247:     read everything that you write here.
                   3248: 
                   3249: PLIST
                   3250: 
                   3251:     This file governs the files that are installed on your system: all the
                   3252:     binaries, manual pages, etc. There are other directives which may be
                   3253:     entered in this file, to control the creation and deletion of directories,
1.6       rillig   3254:     and the location of inserted files. See Chapter 13, PLIST issues for more
1.1       dsieger  3255:     information.
                   3256: 
1.6       rillig   3257: 11.5. Optional files
1.1       dsieger  3258: 
1.6       rillig   3259: 11.5.1. Files affecting the binary package
1.1       dsieger  3260: 
                   3261: INSTALL
                   3262: 
                   3263:     This shell script is invoked twice by pkg_add(1). First time after package
                   3264:     extraction and before files are moved in place, the second time after the
                   3265:     files to install are moved in place. This can be used to do any custom
                   3266:     procedures not possible with @exec commands in PLIST. See pkg_add(1) and
1.6       rillig   3267:     pkg_create(1) for more information. See also Section 15.1, "Files and
1.29      wiz      3268:     directories outside the installation prefix". Please note that you can
                   3269:     modify variables in it easily by using FILES_SUBST in the package's
                   3270:     Makefile:
                   3271: 
                   3272:     FILES_SUBST+=  SOMEVAR="somevalue"
                   3273: 
                   3274:     replaces "@SOMEVAR@" with "somevalue" in the INSTALL. By default,
                   3275:     substitution is performed for PREFIX, LOCALBASE, X11BASE, VARBASE, and a
                   3276:     few others, type make help topic=FILES_SUBST for a complete list.
1.1       dsieger  3277: 
                   3278: DEINSTALL
                   3279: 
                   3280:     This script is executed before and after any files are removed. It is this
                   3281:     script's responsibility to clean up any additional messy details around the
                   3282:     package's installation, since all pkg_delete knows is how to delete the
                   3283:     files created in the original distribution. See pkg_delete(1) and
1.29      wiz      3284:     pkg_create(1) for more information. The same methods to replace variables
                   3285:     can be used as for the INSTALL file.
1.1       dsieger  3286: 
                   3287: MESSAGE
                   3288: 
                   3289:     This file is displayed after installation of the package. Useful for things
                   3290:     like legal notices on almost-free software and hints for updating config
                   3291:     files after installing modules for apache, PHP etc. Please note that you
                   3292:     can modify variables in it easily by using MESSAGE_SUBST in the package's
                   3293:     Makefile:
                   3294: 
                   3295:     MESSAGE_SUBST+=  SOMEVAR="somevalue"
                   3296: 
                   3297:     replaces "${SOMEVAR}" with "somevalue" in MESSAGE. By default, substitution
1.99      sevan    3298:     is performed for PKGNAME, PKGBASE, PREFIX, LOCALBASE, X11BASE,
1.16      jnemeth  3299:     PKG_SYSCONFDIR, ROOT_GROUP, and ROOT_USER.
1.1       dsieger  3300: 
                   3301:     You can display a different or additional files by setting the MESSAGE_SRC
                   3302:     variable. Its default is MESSAGE, if the file exists.
                   3303: 
                   3304: ALTERNATIVES
                   3305: 
1.66      asau     3306:     This file is used by the alternatives framework. It creates, configures,
                   3307:     and destroys generic wrappers used to run programs with similar interfaces.
                   3308:     See pkg_alternatives(8) from pkgtools/pkg_alternatives for more
                   3309:     information.
                   3310: 
                   3311:     Each line of the file contains two filenames, first the wrapper and then
                   3312:     the alternative provided by the package. Both paths are relative to PREFIX.
1.1       dsieger  3313: 
1.6       rillig   3314: 11.5.2. Files affecting the build process
1.1       dsieger  3315: 
                   3316: Makefile.common
                   3317: 
                   3318:     This file contains arbitrary things that could also go into a Makefile, but
                   3319:     its purpose is to be used by more than one package. This file should only
                   3320:     be used when the packages that will use the file are known in advance. For
                   3321:     other purposes it is often better to write a *.mk file and give it a good
                   3322:     name that describes what it does.
                   3323: 
                   3324: buildlink3.mk
                   3325: 
                   3326:     This file contains the dependency information for the buildlink3 framework
1.6       rillig   3327:     (see Chapter 14, Buildlink methodology).
1.1       dsieger  3328: 
                   3329: hacks.mk
                   3330: 
                   3331:     This file contains workarounds for compiler bugs and similar things. It is
                   3332:     included automatically by the pkgsrc infrastructure, so you don't need an
                   3333:     extra .include line for it.
                   3334: 
                   3335: options.mk
                   3336: 
                   3337:     This file contains the code for the package-specific options (see
1.6       rillig   3338:     Chapter 16, Options handling) that can be selected by the user. If a
1.1       dsieger  3339:     package has only one or two options, it is equally acceptable to put the
                   3340:     code directly into the Makefile.
                   3341: 
1.6       rillig   3342: 11.5.3. Files affecting nothing at all
1.1       dsieger  3343: 
                   3344: README*
                   3345: 
                   3346:     These files do not take place in the creation of a package and thus are
                   3347:     purely informative to the package developer.
                   3348: 
                   3349: TODO
                   3350: 
                   3351:     This file contains things that need to be done to make the package even
                   3352:     better.
                   3353: 
1.6       rillig   3354: 11.6. work*
1.1       dsieger  3355: 
                   3356: When you type make, the distribution files are unpacked into the directory
                   3357: denoted by WRKDIR. It can be removed by running make clean. Besides the
                   3358: sources, this directory is also used to keep various timestamp files. The
                   3359: directory gets removed completely on clean. The default is ${.CURDIR}/work or $
                   3360: {.CURDIR}/work.${MACHINE_ARCH} if OBJMACHINE is set.
                   3361: 
1.6       rillig   3362: 11.7. files/*
1.1       dsieger  3363: 
                   3364: If you have any files that you wish to be placed in the package prior to
                   3365: configuration or building, you could place these files here and use a ${CP}
                   3366: command in the "pre-configure" target to achieve this. Alternatively, you could
                   3367: simply diff the file against /dev/null and use the patch mechanism to manage
                   3368: the creation of this file.
                   3369: 
                   3370: If you want to share files in this way with other packages, set the FILESDIR
                   3371: variable to point to the other package's files directory, e.g.:
                   3372: 
                   3373: FILESDIR=${.CURDIR}/../xemacs/files
                   3374: 
1.6       rillig   3375: Chapter 12. Programming in Makefiles
1.1       dsieger  3376: 
                   3377: Table of Contents
                   3378: 
1.6       rillig   3379: 12.1. Caveats
                   3380: 12.2. Makefile variables
1.1       dsieger  3381: 
1.6       rillig   3382:     12.2.1. Naming conventions
1.1       dsieger  3383: 
1.6       rillig   3384: 12.3. Code snippets
1.1       dsieger  3385: 
1.6       rillig   3386:     12.3.1. Adding things to a list
1.117     sevan    3387:     12.3.2. Echoing a string exactly as-is
1.108     rillig   3388:     12.3.3. Passing CFLAGS to GNU configure scripts
                   3389:     12.3.4. Handling possibly empty variables
1.1       dsieger  3390: 
                   3391: Pkgsrc consists of many Makefile fragments, each of which forms a well-defined
                   3392: part of the pkgsrc system. Using the make(1) system as a programming language
                   3393: for a big system like pkgsrc requires some discipline to keep the code correct
                   3394: and understandable.
                   3395: 
                   3396: The basic ingredients for Makefile programming are variables (which are
                   3397: actually macros) and shell commands. Among these shell commands may even be
                   3398: more complex ones like awk(1) programs. To make sure that every shell command
                   3399: runs as intended it is necessary to quote all variables correctly when they are
                   3400: used.
                   3401: 
                   3402: This chapter describes some patterns, that appear quite often in Makefiles,
                   3403: including the pitfalls that come along with them.
                   3404: 
1.6       rillig   3405: 12.1. Caveats
1.1       dsieger  3406: 
                   3407:   * When you are creating a file as a target of a rule, always write the data
                   3408:     to a temporary file first and finally rename that file. Otherwise there
                   3409:     might occur an error in the middle of generating the file, and when the
                   3410:     user runs make(1) for the second time, the file exists and will not be
                   3411:     regenerated properly. Example:
                   3412: 
                   3413:     wrong:
                   3414:             @echo "line 1" > ${.TARGET}
                   3415:             @echo "line 2" >> ${.TARGET}
                   3416:             @false
                   3417: 
                   3418:     correct:
                   3419:             @echo "line 1" > ${.TARGET}.tmp
                   3420:             @echo "line 2" >> ${.TARGET}.tmp
                   3421:             @false
                   3422:             @mv ${.TARGET}.tmp ${.TARGET}
                   3423: 
                   3424:     When you run make wrong twice, the file wrong will exist, although there
                   3425:     was an error message in the first run. On the other hand, running make
                   3426:     correct gives an error message twice, as expected.
                   3427: 
                   3428:     You might remember that make(1) sometimes removes ${.TARGET} in case of
                   3429:     error, but this only happens when it is interrupted, for example by
                   3430:     pressing ^C. This does not happen when one of the commands fails (like
                   3431:     false(1) above).
                   3432: 
1.6       rillig   3433: 12.2. Makefile variables
1.1       dsieger  3434: 
                   3435: Makefile variables contain strings that can be processed using the five
                   3436: operators ``='', ``+='', ``?='', ``:='', and ``!='', which are described in the
                   3437: make(1) man page.
                   3438: 
                   3439: When a variable's value is parsed from a Makefile, the hash character ``#'' and
                   3440: the backslash character ``\'' are handled specially. If a backslash is followed
                   3441: by a newline, any whitespace immediately in front of the backslash, the
                   3442: backslash, the newline, and any whitespace immediately behind the newline are
                   3443: replaced with a single space. A backslash character and an immediately
                   3444: following hash character are replaced with a single hash character. Otherwise,
                   3445: the backslash is passed as is. In a variable assignment, any hash character
                   3446: that is not preceded by a backslash starts a comment that continues upto the
                   3447: end of the logical line.
                   3448: 
1.108     rillig   3449: The evaluation of variables either happens immediately or lazy. It happens
                   3450: immediately when the variable occurs on the right-hand side of the ``:='' or
                   3451: the ``!='' operator, in a .if condition or a .for loop. In the other cases, it
                   3452: is evaluated lazily.
1.1       dsieger  3453: 
                   3454: Some of the modifiers split the string into words and then operate on the
                   3455: words, others operate on the string as a whole. When a string is split into
1.108     rillig   3456: words, it is split like in sh(1).
1.1       dsieger  3457: 
                   3458: There are several types of variables that should be handled differently.
                   3459: Strings and two types of lists.
                   3460: 
                   3461:   * Strings can contain arbitrary characters. Nevertheless, you should restrict
                   3462:     yourself to only using printable characters. Examples are PREFIX and
                   3463:     COMMENT.
                   3464: 
                   3465:   * Internal lists are lists that are never exported to any shell command.
                   3466:     Their elements are separated by whitespace. Therefore, the elements
                   3467:     themselves cannot have embedded whitespace. Any other characters are
                   3468:     allowed. Internal lists can be used in .for loops. Examples are DEPENDS and
                   3469:     BUILD_DEPENDS.
                   3470: 
                   3471:   * External lists are lists that may be exported to a shell command. Their
                   3472:     elements can contain any characters, including whitespace. That's why they
                   3473:     cannot be used in .for loops. Examples are DISTFILES and MASTER_SITES.
                   3474: 
1.6       rillig   3475: 12.2.1. Naming conventions
1.1       dsieger  3476: 
                   3477:   * All variable names starting with an underscore are reserved for use by the
                   3478:     pkgsrc infrastructure. They shall not be used by package Makefiles.
                   3479: 
                   3480:   * In .for loops you should use lowercase variable names for the iteration
                   3481:     variables.
                   3482: 
                   3483:   * All list variables should have a ``plural'' name, e.g. PKG_OPTIONS or
                   3484:     DISTFILES.
                   3485: 
1.6       rillig   3486: 12.3. Code snippets
1.1       dsieger  3487: 
1.108     rillig   3488: 12.3.1. Adding things to a list
                   3489: 
                   3490: When adding a string that possibly contains whitespace or quotes to a list
                   3491: (example 1), it must be quoted using the :Q modifier.
1.1       dsieger  3492: 
1.108     rillig   3493: When adding another list to a list (example 2), it must not be quoted, since
                   3494: its elements are already quoted.
1.1       dsieger  3495: 
1.108     rillig   3496: STRING=         foo * bar `date`
                   3497: LIST=           # empty
                   3498: ANOTHER_LIST=   a=b c=d
1.1       dsieger  3499: 
1.108     rillig   3500: LIST+=          ${STRING:Q}       # 1
                   3501: LIST+=          ${ANOTHER_LIST}   # 2
1.1       dsieger  3502: 
1.117     sevan    3503: 12.3.2. Echoing a string exactly as-is
1.1       dsieger  3504: 
1.108     rillig   3505: Echoing a string containing special characters needs special work.
1.1       dsieger  3506: 
                   3507: STRING=         foo bar <    > * `date` $$HOME ' "
1.108     rillig   3508: EXAMPLE_ENV=    string=${STRING:Q} x=multiple\ quoted\ words
1.1       dsieger  3509: 
                   3510: all:
                   3511:         echo ${STRING}                  # 1
1.108     rillig   3512:         echo ${STRING:Q}                # 2
                   3513:         printf '%s\n' ${STRING:Q}''     # 3
                   3514:         env ${EXAMPLE_ENV} sh -c 'echo "$$string"; echo "$$x"'   # 4
1.1       dsieger  3515: 
                   3516: Example 1 leads to a syntax error in the shell, as the characters are just
                   3517: copied.
                   3518: 
1.108     rillig   3519: Example 2 quotes the string so that the shell interprets it correctly. But the
                   3520: echo command may additionally interpret strings with a leading dash or those
                   3521: containing backslashes.
                   3522: 
                   3523: Example 3 can handle arbitrary strings, since printf(1) only interprets the
                   3524: format string, but not the next argument.
                   3525: 
                   3526: In example 4, the EXAMPLE_ENV does not need to be quoted because the quoting
                   3527: has already been done when adding elements to the list.
                   3528: 
                   3529: 12.3.3. Passing CFLAGS to GNU configure scripts
                   3530: 
                   3531: When passing CFLAGS or similar variables to a GNU-style configure script
                   3532: (especially those that call other configure scripts), it must not have leading
                   3533: or trailing whitespace, since otherwise the configure script gets confused. To
                   3534: trim leading and trailing whitespace, use the :M modifier, as in the following
                   3535: example:
                   3536: 
                   3537: CPPFLAGS=               # empty
                   3538: CPPFLAGS+=              -Wundef -DPREFIX=\"${PREFIX}\"
                   3539: CPPFLAGS+=              ${MY_CPPFLAGS}
                   3540: 
                   3541: CONFIGURE_ARGS+=        CPPFLAGS=${CPPFLAGS:M*:Q}
                   3542: 
                   3543: all:
                   3544:         echo x${CPPFLAGS:Q}x            # leading and trailing whitespace
                   3545:         echo x${CONFIGURE_ARGS:Q}x      # properly trimmed
                   3546: 
                   3547: In this example, CPPFLAGS has both leading and trailing whitespace because the
                   3548: += operator always adds a space.
                   3549: 
                   3550: 12.3.4. Handling possibly empty variables
                   3551: 
                   3552: When a possibly empty variable is used in a shell program, it may lead to a
                   3553: syntax error.
                   3554: 
                   3555: EGFILES=        # empty
                   3556: 
                   3557: install-examples:   # produces a syntax error in the shell
                   3558:         for egfile in ${EGFILES}; do            \
                   3559:                 echo "Installing $$egfile";     \
                   3560:         done
                   3561: 
                   3562: The shell only sees the text for egfile in ; do, since ${EGFILES} is replaced
                   3563: with an empty string by make(1). To fix this syntax error, use one of the
                   3564: snippets below.
                   3565: 
                   3566: EMPTY=          # empty
                   3567: 
                   3568: install-examples:
                   3569:         for egfile in ${EGFILES} ""; do         \
                   3570:                 [ -n "$$egfile" ] || continue;  \
                   3571:                 echo "Installing $$egfile";     \
                   3572:         done
                   3573: 
                   3574: In this case, an empty string is appended to the iteration list (to prevent the
                   3575: syntax error) and filtered out later.
1.1       dsieger  3576: 
1.108     rillig   3577: EGFILES=        # empty
1.1       dsieger  3578: 
1.108     rillig   3579: install-examples:
                   3580: .for egfile in ${EGFILES}
                   3581:         echo "Installing ${egfile}"
                   3582: .endfor
                   3583: 
                   3584: This variant only works when EGFILES does not contain filenames with spaces,
                   3585: since the .for loop splits on simple whitespace.
                   3586: 
                   3587: To have a shell command test whether a make variable is empty, use the
                   3588: following code: ${TEST} -z ${POSSIBLY_EMPTY:Q}"".
1.1       dsieger  3589: 
1.6       rillig   3590: Chapter 13. PLIST issues
1.1       dsieger  3591: 
                   3592: Table of Contents
                   3593: 
1.6       rillig   3594: 13.1. RCS ID
                   3595: 13.2. Semi-automatic PLIST generation
                   3596: 13.3. Tweaking output of make print-PLIST
                   3597: 13.4. Variable substitution in PLIST
                   3598: 13.5. Man page compression
                   3599: 13.6. Changing PLIST source with PLIST_SRC
                   3600: 13.7. Platform-specific and differing PLISTs
1.86      wiz      3601: 13.8. Build-specific PLISTs
                   3602: 13.9. Sharing directories between packages
1.1       dsieger  3603: 
                   3604: The PLIST file contains a package's "packing list", i.e. a list of files that
                   3605: belong to the package (relative to the ${PREFIX} directory it's been installed
                   3606: in) plus some additional statements - see the pkg_create(1) man page for a full
                   3607: list. This chapter addresses some issues that need attention when dealing with
                   3608: the PLIST file (or files, see below!).
                   3609: 
1.6       rillig   3610: 13.1. RCS ID
1.1       dsieger  3611: 
                   3612: Be sure to add a RCS ID line as the first thing in any PLIST file you write:
                   3613: 
1.121   ! sevan    3614: @comment $NetBSD $
        !          3615: 
        !          3616: An artificial space has been added betweeen NetBSD and $, this is a workaround
        !          3617: here to prevent CVS expanding to the filename of the guide. When adding the RCS
        !          3618: ID the space should be ommited.
1.1       dsieger  3619: 
1.6       rillig   3620: 13.2. Semi-automatic PLIST generation
1.1       dsieger  3621: 
                   3622: You can use the make print-PLIST command to output a PLIST that matches any new
1.6       rillig   3623: files since the package was extracted. See Section 17.17, "Other helpful
1.1       dsieger  3624: targets" for more information on this target.
                   3625: 
1.6       rillig   3626: 13.3. Tweaking output of make print-PLIST
1.1       dsieger  3627: 
                   3628: The PRINT_PLIST_AWK variable takes a set of AWK patterns and actions that are
                   3629: used to filter the output of print-PLIST. You can append any chunk of AWK
                   3630: scripting you like to it, but be careful with quoting.
                   3631: 
                   3632: For example, to get all files inside the libdata/foo directory removed from the
                   3633: resulting PLIST:
                   3634: 
                   3635: PRINT_PLIST_AWK+=       /^libdata\/foo/ { next; }
                   3636: 
1.6       rillig   3637: 13.4. Variable substitution in PLIST
1.1       dsieger  3638: 
                   3639: A number of variables are substituted automatically in PLISTs when a package is
                   3640: installed on a system. This includes the following variables:
                   3641: 
                   3642: ${MACHINE_ARCH}, ${MACHINE_GNU_ARCH}
                   3643: 
                   3644:     Some packages like emacs and perl embed information about which
                   3645:     architecture they were built on into the pathnames where they install their
                   3646:     files. To handle this case, PLIST will be preprocessed before actually
                   3647:     used, and the symbol "${MACHINE_ARCH}" will be replaced by what uname -p
                   3648:     gives. The same is done if the string ${MACHINE_GNU_ARCH} is embedded in
                   3649:     PLIST somewhere - use this on packages that have GNU autoconf-created
                   3650:     configure scripts.
                   3651: 
                   3652:     Legacy note
                   3653: 
                   3654:     There used to be a symbol "$ARCH" that was replaced by the output of uname
                   3655:     -m, but that's no longer supported and has been removed.
                   3656: 
                   3657: ${OPSYS}, ${LOWER_OPSYS}, ${OS_VERSION}
                   3658: 
                   3659:     Some packages want to embed the OS name and version into some paths. To do
                   3660:     this, use these variables in the PLIST:
                   3661: 
1.42      asau     3662:       + ${OPSYS} - output of "uname -s"
1.1       dsieger  3663: 
1.42      asau     3664:       + ${LOWER_OPSYS} - lowercase common name (eg. "solaris")
1.1       dsieger  3665: 
1.42      asau     3666:       + ${OS_VERSION} - "uname -r"
1.1       dsieger  3667: 
1.88      tnn      3668: For a list of values which are replaced by default, the output of make help
                   3669: topic=PLIST_SUBST as well as searching the pkgsrc/mk directory with grep for
                   3670: PLIST_SUBST should help.
1.1       dsieger  3671: 
                   3672: If you want to change other variables not listed above, you can add variables
                   3673: and their expansions to this variable in the following way, similar to
1.6       rillig   3674: MESSAGE_SUBST (see Section 11.5, "Optional files"):
1.1       dsieger  3675: 
                   3676: PLIST_SUBST+=   SOMEVAR="somevalue"
                   3677: 
                   3678: This replaces all occurrences of "${SOMEVAR}" in the PLIST with "somevalue".
                   3679: 
1.19      snj      3680: The PLIST_VARS variable can be used to simplify the common case of
                   3681: conditionally including some PLIST entries. It can be done by adding
                   3682: PLIST_VARS+=foo and setting the corresponding PLIST.foo variable to yes if the
                   3683: entry should be included. This will substitute "${PLIST.foo}" in the PLIST with
                   3684: either """" or ""@comment "". For example, in Makefile:
1.18      mishka   3685: 
                   3686: PLIST_VARS+=    foo
                   3687: .if condition
                   3688: PLIST.foo=      yes
                   3689: .else
                   3690: 
                   3691: And then in PLIST:
                   3692: 
1.121   ! sevan    3693: @comment $NetBSD $
1.18      mishka   3694: bin/bar
                   3695: man/man1/bar.1
                   3696: ${PLIST.foo}bin/foo
                   3697: ${PLIST.foo}man/man1/foo.1
                   3698: ${PLIST.foo}share/bar/foo.data
                   3699: 
1.121   ! sevan    3700: An artificial space has been added betweeen NetBSD and $, this is a workaround
        !          3701: here to prevent CVS expanding to the filename of the guide. When adding the RCS
        !          3702: ID the space should be ommited.
        !          3703: 
1.6       rillig   3704: 13.5. Man page compression
1.1       dsieger  3705: 
                   3706: Man pages should be installed in compressed form if MANZ is set (in
                   3707: bsd.own.mk), and uncompressed otherwise. To handle this in the PLIST file, the
                   3708: suffix ".gz" is appended/removed automatically for man pages according to MANZ
                   3709: and MANCOMPRESSED being set or not, see above for details. This modification of
                   3710: the PLIST file is done on a copy of it, not PLIST itself.
                   3711: 
1.6       rillig   3712: 13.6. Changing PLIST source with PLIST_SRC
1.1       dsieger  3713: 
                   3714: To use one or more files as source for the PLIST used in generating the binary
                   3715: package, set the variable PLIST_SRC to the names of that file(s). The files are
                   3716: later concatenated using cat(1), and the order of things is important. The
                   3717: default for PLIST_SRC is ${PKGDIR}/PLIST.
                   3718: 
1.6       rillig   3719: 13.7. Platform-specific and differing PLISTs
1.1       dsieger  3720: 
                   3721: Some packages decide to install a different set of files based on the operating
                   3722: system being used. These differences can be automatically handled by using the
                   3723: following files:
                   3724: 
                   3725:   * PLIST.common
                   3726: 
                   3727:   * PLIST.${OPSYS}
                   3728: 
                   3729:   * PLIST.${MACHINE_ARCH}
                   3730: 
                   3731:   * PLIST.${OPSYS}-${MACHINE_ARCH}
                   3732: 
                   3733:   * PLIST.common_end
                   3734: 
1.86      wiz      3735: 13.8. Build-specific PLISTs
                   3736: 
                   3737: Some packages decide to generate hard-to-guess file names during installation
                   3738: that are hard to wire down.
                   3739: 
                   3740: In such cases, you can set the GENERATE_PLIST variable to shell code terminated
                   3741: (with a semicolon) that will output PLIST entries which will be appended to the
                   3742: PLIST
                   3743: 
                   3744: You can find one example in editors/xemacs:
                   3745: 
1.111     sevan    3746: GENERATE_PLIST+=        ${ECHO} bin/${DISTNAME}-`${WRKSRC}/src/xemacs -sd`.dmp ;
1.86      wiz      3747: 
                   3748: which will append something like bin/xemacs-21.4.23-54e8ea71.dmp to the PLIST.
                   3749: 
                   3750: 13.9. Sharing directories between packages
1.1       dsieger  3751: 
                   3752: A "shared directory" is a directory where multiple (and unrelated) packages
1.23      jakllsch 3753: install files. These directories were problematic because you had to add
1.1       dsieger  3754: special tricks in the PLIST to conditionally remove them, or have some
                   3755: centralized package handle them.
                   3756: 
1.23      jakllsch 3757: In pkgsrc, it is now easy: Each package should create directories and install
                   3758: files as needed; pkg_delete will remove any directories left empty after
                   3759: uninstalling a package.
1.1       dsieger  3760: 
1.23      jakllsch 3761: If a package needs an empty directory to work, create the directory during
                   3762: installation as usual, and also add an entry to the PLIST:
1.1       dsieger  3763: 
1.23      jakllsch 3764: @pkgdir path/to/empty/directory
1.1       dsieger  3765: 
1.86      wiz      3766: or take a look at MAKE_DIRS and OWN_DIRS.
                   3767: 
1.6       rillig   3768: Chapter 14. Buildlink methodology
1.1       dsieger  3769: 
                   3770: Table of Contents
                   3771: 
1.6       rillig   3772: 14.1. Converting packages to use buildlink3
                   3773: 14.2. Writing buildlink3.mk files
1.1       dsieger  3774: 
1.6       rillig   3775:     14.2.1. Anatomy of a buildlink3.mk file
1.27      wiz      3776:     14.2.2. Updating BUILDLINK_API_DEPENDS.pkg and BUILDLINK_ABI_DEPENDS.pkg in
                   3777:         buildlink3.mk files
1.1       dsieger  3778: 
1.6       rillig   3779: 14.3. Writing builtin.mk files
1.1       dsieger  3780: 
1.6       rillig   3781:     14.3.1. Anatomy of a builtin.mk file
                   3782:     14.3.2. Global preferences for native or pkgsrc software
1.1       dsieger  3783: 
                   3784: Buildlink is a framework in pkgsrc that controls what headers and libraries are
                   3785: seen by a package's configure and build processes. This is implemented in a two
                   3786: step process:
                   3787: 
                   3788:  1. Symlink headers and libraries for dependencies into BUILDLINK_DIR, which by
                   3789:     default is a subdirectory of WRKDIR.
                   3790: 
                   3791:  2. Create wrapper scripts that are used in place of the normal compiler tools
                   3792:     that translate -I${LOCALBASE}/include and -L${LOCALBASE}/lib into
                   3793:     references to BUILDLINK_DIR. The wrapper scripts also make native compiler
                   3794:     on some operating systems look like GCC, so that packages that expect GCC
                   3795:     won't require modifications to build with those native compilers.
                   3796: 
                   3797: This normalizes the environment in which a package is built so that the package
                   3798: may be built consistently despite what other software may be installed. Please
                   3799: note that the normal system header and library paths, e.g. /usr/include, /usr/
                   3800: lib, etc., are always searched -- buildlink3 is designed to insulate the
                   3801: package build from non-system-supplied software.
                   3802: 
1.6       rillig   3803: 14.1. Converting packages to use buildlink3
1.1       dsieger  3804: 
1.25      wiz      3805: The process of converting packages to use the buildlink3 framework ("bl3ifying"
                   3806: ) is fairly straightforward. The things to keep in mind are:
1.1       dsieger  3807: 
                   3808:  1. Ensure that the build always calls the wrapper scripts instead of the
                   3809:     actual toolchain. Some packages are tricky, and the only way to know for
                   3810:     sure is the check ${WRKDIR}/.work.log to see if the wrappers are being
                   3811:     invoked.
                   3812: 
                   3813:  2. Don't override PREFIX from within the package Makefile, e.g. Java VMs,
                   3814:     standalone shells, etc., because the code to symlink files into $
                   3815:     {BUILDLINK_DIR} looks for files relative to "pkg_info -qp pkgname".
                   3816: 
                   3817:  3. Remember that only the buildlink3.mk files that you list in a package's
                   3818:     Makefile are added as dependencies for that package.
                   3819: 
                   3820: If a dependency on a particular package is required for its libraries and
                   3821: headers, then we replace:
                   3822: 
                   3823: DEPENDS+=       foo>=1.1.0:../../category/foo
                   3824: 
                   3825: with
                   3826: 
                   3827: .include "../../category/foo/buildlink3.mk"
                   3828: 
                   3829: The buildlink3.mk files usually define the required dependencies. If you need a
                   3830: newer version of the dependency when using buildlink3.mk files, then you can
                   3831: define it in your Makefile; for example:
                   3832: 
                   3833: BUILDLINK_API_DEPENDS.foo+=   foo>=1.1.0
                   3834: .include "../../category/foo/buildlink3.mk"
                   3835: 
                   3836: There are several buildlink3.mk files in pkgsrc/mk that handle special package
                   3837: issues:
                   3838: 
                   3839:   * bdb.buildlink3.mk chooses either the native or a pkgsrc Berkeley DB
                   3840:     implementation based on the values of BDB_ACCEPTED and BDB_DEFAULT.
                   3841: 
                   3842:   * curses.buildlink3.mk: If the system comes with neither Curses nor NCurses,
                   3843:     this will take care to install the devel/ncurses package.
                   3844: 
                   3845:   * krb5.buildlink3.mk uses the value of KRB5_ACCEPTED to choose between adding
                   3846:     a dependency on Heimdal or MIT-krb5 for packages that require a Kerberos 5
                   3847:     implementation.
                   3848: 
                   3849:   * motif.buildlink3.mk checks for a system-provided Motif installation or adds
1.46      obache   3850:     a dependency on x11/lesstif, x11/motif or x11/openmotif. The user can set
                   3851:     MOTIF_TYPE to "dt", "lesstif", "motif" or "openmotif" to choose which Motif
                   3852:     version will be used.
1.1       dsieger  3853: 
1.57      wiz      3854:   * readline.buildlink3.mk checks for a system-provided GNU readline or
                   3855:     editline (libedit) installation, or adds a dependency on devel/readline,
                   3856:     devel/editline. The user can set READLINE_DEFAULT to choose readline
1.56      ryoon    3857:     implementation. If your package really needs GNU readline library, its
                   3858:     Makefile should include devel/readline/buildlink3.mk instead of
                   3859:     readline.buildlink3.mk.
                   3860: 
1.1       dsieger  3861:   * oss.buildlink3.mk defines several variables that may be used by packages
                   3862:     that use the Open Sound System (OSS) API.
                   3863: 
1.36      wiz      3864:   * pgsql.buildlink3.mk will accept any of the Postgres versions in the
                   3865:     variable PGSQL_VERSIONS_ACCEPTED and default to the version
                   3866:     PGSQL_VERSION_DEFAULT. See the file for more information.
1.1       dsieger  3867: 
                   3868:   * pthread.buildlink3.mk uses the value of PTHREAD_OPTS and checks for native
                   3869:     pthreads or adds a dependency on devel/pth as needed.
                   3870: 
                   3871:   * xaw.buildlink3.mk uses the value of XAW_TYPE to choose a particular Athena
                   3872:     widgets library.
                   3873: 
                   3874: The comments in those buildlink3.mk files provide a more complete description
                   3875: of how to use them properly.
                   3876: 
1.6       rillig   3877: 14.2. Writing buildlink3.mk files
1.1       dsieger  3878: 
                   3879: A package's buildlink3.mk file is included by Makefiles to indicate the need to
                   3880: compile and link against header files and libraries provided by the package. A
                   3881: buildlink3.mk file should always provide enough information to add the correct
                   3882: type of dependency relationship and include any other buildlink3.mk files that
                   3883: it needs to find headers and libraries that it needs in turn.
                   3884: 
                   3885: To generate an initial buildlink3.mk file for further editing, Rene Hexel's
                   3886: pkgtools/createbuildlink package is highly recommended. For most packages, the
                   3887: following command will generate a good starting point for buildlink3.mk files:
                   3888: 
                   3889: % cd pkgsrc/category/pkgdir
                   3890: % createbuildlink >buildlink3.mk
                   3891: 
                   3892: 
1.6       rillig   3893: 14.2.1. Anatomy of a buildlink3.mk file
1.1       dsieger  3894: 
                   3895: The following real-life example buildlink3.mk is taken from pkgsrc/graphics/
                   3896: tiff:
                   3897: 
1.19      snj      3898: # $NetBSD: buildlink3.mk,v 1.16 2009/03/20 19:24:45 joerg Exp $
1.1       dsieger  3899: 
1.19      snj      3900: BUILDLINK_TREE+=        tiff
1.1       dsieger  3901: 
1.19      snj      3902: .if !defined(TIFF_BUILDLINK3_MK)
                   3903: TIFF_BUILDLINK3_MK:=
1.1       dsieger  3904: 
1.19      snj      3905: BUILDLINK_API_DEPENDS.tiff+=    tiff>=3.6.1
                   3906: BUILDLINK_ABI_DEPENDS.tiff+=    tiff>=3.7.2nb1
1.1       dsieger  3907: BUILDLINK_PKGSRCDIR.tiff?=      ../../graphics/tiff
                   3908: 
                   3909: .include "../../devel/zlib/buildlink3.mk"
                   3910: .include "../../graphics/jpeg/buildlink3.mk"
1.19      snj      3911: .endif # TIFF_BUILDLINK3_MK
1.1       dsieger  3912: 
1.19      snj      3913: BUILDLINK_TREE+=        -tiff
1.1       dsieger  3914: 
1.19      snj      3915: The header and footer manipulate BUILDLINK_TREE, which is common across all
                   3916: buildlink3.mk files and is used to track the dependency tree.
1.1       dsieger  3917: 
1.19      snj      3918: The main section is protected from multiple inclusion and controls how the
1.1       dsieger  3919: dependency on pkg is added. Several important variables are set in the section:
                   3920: 
                   3921:   * BUILDLINK_API_DEPENDS.pkg is the actual dependency recorded in the
                   3922:     installed package; this should always be set using += to ensure that we're
                   3923:     appending to any pre-existing list of values. This variable should be set
1.27      wiz      3924:     to the first version of the package that had an backwards-incompatible API
                   3925:     change.
1.1       dsieger  3926: 
                   3927:   * BUILDLINK_PKGSRCDIR.pkg is the location of the pkg pkgsrc directory.
                   3928: 
                   3929:   * BUILDLINK_DEPMETHOD.pkg (not shown above) controls whether we use
                   3930:     BUILD_DEPENDS or DEPENDS to add the dependency on pkg. The build dependency
                   3931:     is selected by setting BUILDLINK_DEPMETHOD.pkg to "build". By default, the
                   3932:     full dependency is used.
                   3933: 
                   3934:   * BUILDLINK_INCDIRS.pkg and BUILDLINK_LIBDIRS.pkg (not shown above) are lists
                   3935:     of subdirectories of ${BUILDLINK_PREFIX.pkg} to add to the header and
                   3936:     library search paths. These default to "include" and "lib" respectively.
                   3937: 
                   3938:   * BUILDLINK_CPPFLAGS.pkg (not shown above) is the list of preprocessor flags
                   3939:     to add to CPPFLAGS, which are passed on to the configure and build phases.
                   3940:     The "-I" option should be avoided and instead be handled using
                   3941:     BUILDLINK_INCDIRS.pkg as above.
                   3942: 
                   3943: The following variables are all optionally defined within this second section
                   3944: (protected against multiple inclusion) and control which package files are
                   3945: symlinked into ${BUILDLINK_DIR} and how their names are transformed during the
                   3946: symlinking:
                   3947: 
                   3948:   * BUILDLINK_FILES.pkg (not shown above) is a shell glob pattern relative to $
                   3949:     {BUILDLINK_PREFIX.pkg} to be symlinked into ${BUILDLINK_DIR}, e.g. include/
                   3950:     *.h.
                   3951: 
                   3952:   * BUILDLINK_FILES_CMD.pkg (not shown above) is a shell pipeline that outputs
                   3953:     to stdout a list of files relative to ${BUILDLINK_PREFIX.pkg}. The
                   3954:     resulting files are to be symlinked into ${BUILDLINK_DIR}. By default, this
                   3955:     takes the +CONTENTS of a pkg and filters it through $
                   3956:     {BUILDLINK_CONTENTS_FILTER.pkg}.
                   3957: 
                   3958:   * BUILDLINK_CONTENTS_FILTER.pkg (not shown above) is a filter command that
                   3959:     filters +CONTENTS input into a list of files relative to $
1.84      wiz      3960:     {BUILDLINK_PREFIX.pkg} on stdout. By default, BUILDLINK_CONTENTS_FILTER.pkg
                   3961:     outputs the contents of the include and lib directories in the package
                   3962:     +CONTENTS.
1.1       dsieger  3963: 
                   3964:   * BUILDLINK_FNAME_TRANSFORM.pkg (not shown above) is a list of sed arguments
                   3965:     used to transform the name of the source filename into a destination
                   3966:     filename, e.g. -e "s|/curses.h|/ncurses.h|g".
                   3967: 
1.19      snj      3968: This section can additionally include any buildlink3.mk needed for pkg's
                   3969: library dependencies. Including these buildlink3.mk files means that the
                   3970: headers and libraries for these dependencies are also symlinked into $
                   3971: {BUILDLINK_DIR} whenever the pkg buildlink3.mk file is included. Dependencies
                   3972: are only added for directly include buildlink3.mk files.
1.1       dsieger  3973: 
1.48      wiz      3974: When providing a buildlink3.mk and including other buildlink3.mk files in it,
1.51      wiz      3975: please only add necessary ones, i.e., those whose libraries or header files are
1.48      wiz      3976: automatically exposed when the package is use.
                   3977: 
                   3978: In particular, if only an executable (bin/foo) is linked against a library,
                   3979: that library does not need to be propagated in the buildlink3.mk file.
                   3980: 
                   3981: The following steps should help you decide if a buildlink3.mk file needs to be
                   3982: included:
                   3983: 
                   3984:   * Look at the installed header files: What headers do they include? The
                   3985:     packages providing these files must be buildlinked.
                   3986: 
1.50      wiz      3987:   * Run ldd on all installed libraries and look against what other libraries
                   3988:     they link. Some of the packages providing these probably need to be
                   3989:     buildlinked; however, it's not automatic, since e.g. GTK on some systems
                   3990:     pulls in the X libraries, so they will show up in the ldd output, while on
1.51      wiz      3991:     others (like OS X) it won't. ldd output can thus only be used as a hint.
1.50      wiz      3992: 
1.27      wiz      3993: 14.2.2. Updating BUILDLINK_API_DEPENDS.pkg and BUILDLINK_ABI_DEPENDS.pkg in
                   3994: buildlink3.mk files
1.1       dsieger  3995: 
1.27      wiz      3996: These two variables differ in that one describes source compatibility (API) and
                   3997: the other binary compatibility (ABI). The difference is that a change in the
                   3998: API breaks compilation of programs while changes in the ABI stop compiled
                   3999: programs from running.
                   4000: 
1.28      wiz      4001: Changes to the BUILDLINK_API_DEPENDS.pkg variable in a buildlink3.mk file
                   4002: happen very rarely. One possible reason is that all packages depending on this
                   4003: already need a newer version. In case it is bumped see the description below.
1.27      wiz      4004: 
                   4005: The most common example of an ABI change is that the major version of a shared
                   4006: library is increased. In this case, BUILDLINK_ABI_DEPENDS.pkg should be
                   4007: adjusted to require at least the new package version. Then the packages that
                   4008: depend on this package need their PKGREVISIONs increased and, if they have
                   4009: buildlink3.mk files, their BUILDLINK_ABI_DEPENDS.pkg adjusted, too. This is
                   4010: needed so pkgsrc will require the correct package dependency and not settle for
                   4011: an older one when building the source.
1.1       dsieger  4012: 
1.108     rillig   4013: See Section 19.1.5, "Handling dependencies" for more information about
1.1       dsieger  4014: dependencies on other packages, including the BUILDLINK_ABI_DEPENDS and
                   4015: ABI_DEPENDS definitions.
                   4016: 
                   4017: Please take careful consideration before adjusting BUILDLINK_API_DEPENDS.pkg or
                   4018: BUILDLINK_ABI_DEPENDS.pkg as we don't want to cause unneeded package deletions
                   4019: and rebuilds. In many cases, new versions of packages work just fine with older
                   4020: dependencies.
                   4021: 
                   4022: Also it is not needed to set BUILDLINK_ABI_DEPENDS.pkg when it is identical to
                   4023: BUILDLINK_API_DEPENDS.pkg.
                   4024: 
1.6       rillig   4025: 14.3. Writing builtin.mk files
1.1       dsieger  4026: 
                   4027: Some packages in pkgsrc install headers and libraries that coincide with
                   4028: headers and libraries present in the base system. Aside from a buildlink3.mk
                   4029: file, these packages should also include a builtin.mk file that includes the
                   4030: necessary checks to decide whether using the built-in software or the pkgsrc
                   4031: software is appropriate.
                   4032: 
                   4033: The only requirements of a builtin.mk file for pkg are:
                   4034: 
                   4035:  1. It should set USE_BUILTIN.pkg to either "yes" or "no" after it is included.
                   4036: 
                   4037:  2. It should not override any USE_BUILTIN.pkg which is already set before the
                   4038:     builtin.mk file is included.
                   4039: 
                   4040:  3. It should be written to allow multiple inclusion. This is very important
                   4041:     and takes careful attention to Makefile coding.
                   4042: 
1.6       rillig   4043: 14.3.1. Anatomy of a builtin.mk file
1.1       dsieger  4044: 
                   4045: The following is the recommended template for builtin.mk files:
                   4046: 
                   4047: .if !defined(IS_BUILTIN.foo)
                   4048: #
                   4049: # IS_BUILTIN.foo is set to "yes" or "no" depending on whether "foo"
                   4050: # genuinely exists in the system or not.
                   4051: #
                   4052: IS_BUILTIN.foo?=        no
                   4053: 
                   4054: # BUILTIN_PKG.foo should be set here if "foo" is built-in and its package
                   4055: # version can be determined.
                   4056: #
                   4057: .  if !empty(IS_BUILTIN.foo:M[yY][eE][sS])
                   4058: BUILTIN_PKG.foo?=       foo-1.0
                   4059: .  endif
                   4060: .endif  # IS_BUILTIN.foo
                   4061: 
                   4062: .if !defined(USE_BUILTIN.foo)
                   4063: USE_BUILTIN.foo?=       ${IS_BUILTIN.foo}
                   4064: .  if defined(BUILTIN_PKG.foo)
                   4065: .    for _depend_ in ${BUILDLINK_API_DEPENDS.foo}
                   4066: .      if !empty(USE_BUILTIN.foo:M[yY][eE][sS])
                   4067: USE_BUILTIN.foo!=                                                       \
                   4068:         ${PKG_ADMIN} pmatch '${_depend_}' ${BUILTIN_PKG.foo}            \
                   4069:         && ${ECHO} "yes" || ${ECHO} "no"
                   4070: .      endif
                   4071: .    endfor
                   4072: .  endif
                   4073: .endif  # USE_BUILTIN.foo
                   4074: 
                   4075: CHECK_BUILTIN.foo?=     no
                   4076: .if !empty(CHECK_BUILTIN.foo:M[nN][oO])
                   4077: #
                   4078: # Here we place code that depends on whether USE_BUILTIN.foo is set to
                   4079: # "yes" or "no".
                   4080: #
                   4081: .endif  # CHECK_BUILTIN.foo
                   4082: 
                   4083: The first section sets IS_BUILTIN.pkg depending on if pkg really exists in the
                   4084: base system. This should not be a base system software with similar
                   4085: functionality to pkg; it should only be "yes" if the actual package is included
                   4086: as part of the base system. This variable is only used internally within the
                   4087: builtin.mk file.
                   4088: 
                   4089: The second section sets BUILTIN_PKG.pkg to the version of pkg in the base
                   4090: system if it exists (if IS_BUILTIN.pkg is "yes"). This variable is only used
                   4091: internally within the builtin.mk file.
                   4092: 
                   4093: The third section sets USE_BUILTIN.pkg and is required in all builtin.mk files.
                   4094: The code in this section must make the determination whether the built-in
                   4095: software is adequate to satisfy the dependencies listed in
                   4096: BUILDLINK_API_DEPENDS.pkg. This is typically done by comparing BUILTIN_PKG.pkg
1.25      wiz      4097: against each of the dependencies in BUILDLINK_API_DEPENDS.pkg. USE_BUILTIN.pkg 
1.1       dsieger  4098: must be set to the correct value by the end of the builtin.mk file. Note that
                   4099: USE_BUILTIN.pkg may be "yes" even if IS_BUILTIN.pkg is "no" because we may make
                   4100: the determination that the built-in version of the software is similar enough
                   4101: to be used as a replacement.
                   4102: 
                   4103: The last section is guarded by CHECK_BUILTIN.pkg, and includes code that uses
                   4104: the value of USE_BUILTIN.pkg set in the previous section. This typically
                   4105: includes, e.g., adding additional dependency restrictions and listing
                   4106: additional files to symlink into ${BUILDLINK_DIR} (via BUILDLINK_FILES.pkg).
                   4107: 
1.6       rillig   4108: 14.3.2. Global preferences for native or pkgsrc software
1.1       dsieger  4109: 
                   4110: When building packages, it's possible to choose whether to set a global
                   4111: preference for using either the built-in (native) version or the pkgsrc version
                   4112: of software to satisfy a dependency. This is controlled by setting
1.25      wiz      4113: PREFER_PKGSRC and PREFER_NATIVE. These variables take values of either "yes", "
                   4114: no", or a list of packages. PREFER_PKGSRC tells pkgsrc to use the pkgsrc
1.1       dsieger  4115: versions of software, while PREFER_NATIVE tells pkgsrc to use the built-in
                   4116: versions. Preferences are determined by the most specific instance of the
                   4117: package in either PREFER_PKGSRC or PREFER_NATIVE. If a package is specified in
                   4118: neither or in both variables, then PREFER_PKGSRC has precedence over
                   4119: PREFER_NATIVE. For example, to require using pkgsrc versions of software for
                   4120: all but the most basic bits on a NetBSD system, you can set:
                   4121: 
                   4122: PREFER_PKGSRC=  yes
                   4123: PREFER_NATIVE=  getopt skey tcp_wrappers
                   4124: 
                   4125: A package must have a builtin.mk file to be listed in PREFER_NATIVE, otherwise
                   4126: it is simply ignored in that list.
                   4127: 
1.117     sevan    4128: Setting PREFER_NATIVE should be performed straight after bootstrap and
                   4129: PREFER_PKGSRC during bootstrap. Switching between settings globally at a later
                   4130: date can introduce complications with dependency resolution. This is caused by
                   4131: packages built with the opposite preference being installed alongside each
                   4132: other.
                   4133: 
                   4134: # ./bootstrap --prefer-pkgsrc yes
                   4135: 
1.6       rillig   4136: Chapter 15. The pkginstall framework
1.1       dsieger  4137: 
                   4138: Table of Contents
                   4139: 
1.6       rillig   4140: 15.1. Files and directories outside the installation prefix
1.1       dsieger  4141: 
1.6       rillig   4142:     15.1.1. Directory manipulation
                   4143:     15.1.2. File manipulation
1.1       dsieger  4144: 
1.6       rillig   4145: 15.2. Configuration files
1.1       dsieger  4146: 
1.6       rillig   4147:     15.2.1. How PKG_SYSCONFDIR is set
                   4148:     15.2.2. Telling the software where configuration files are
                   4149:     15.2.3. Patching installations
                   4150:     15.2.4. Disabling handling of configuration files
1.1       dsieger  4151: 
1.6       rillig   4152: 15.3. System startup scripts
1.1       dsieger  4153: 
1.6       rillig   4154:     15.3.1. Disabling handling of system startup scripts
1.1       dsieger  4155: 
1.6       rillig   4156: 15.4. System users and groups
                   4157: 15.5. System shells
1.1       dsieger  4158: 
1.6       rillig   4159:     15.5.1. Disabling shell registration
1.1       dsieger  4160: 
1.6       rillig   4161: 15.6. Fonts
1.1       dsieger  4162: 
1.6       rillig   4163:     15.6.1. Disabling automatic update of the fonts databases
1.1       dsieger  4164: 
                   4165: This chapter describes the framework known as pkginstall, whose key features
                   4166: are:
                   4167: 
                   4168:   * Generic installation and manipulation of directories and files outside the
                   4169:     pkgsrc-handled tree, LOCALBASE.
                   4170: 
                   4171:   * Automatic handling of configuration files during installation, provided
                   4172:     that packages are correctly designed.
                   4173: 
                   4174:   * Generation and installation of system startup scripts.
                   4175: 
                   4176:   * Registration of system users and groups.
                   4177: 
                   4178:   * Registration of system shells.
                   4179: 
                   4180:   * Automatic updating of fonts databases.
                   4181: 
                   4182: The following sections inspect each of the above points in detail.
                   4183: 
                   4184: You may be thinking that many of the things described here could be easily done
                   4185: with simple code in the package's post-installation target (post-install). This
                   4186: is incorrect, as the code in them is only executed when building from source.
                   4187: Machines using binary packages could not benefit from it at all (as the code
                   4188: itself could be unavailable). Therefore, the only way to achieve any of the
                   4189: items described above is by means of the installation scripts, which are
                   4190: automatically generated by pkginstall.
                   4191: 
1.6       rillig   4192: 15.1. Files and directories outside the installation prefix
1.1       dsieger  4193: 
                   4194: As you already know, the PLIST file holds a list of files and directories that
                   4195: belong to a package. The names used in it are relative to the installation
                   4196: prefix (${PREFIX}), which means that it cannot register files outside this
                   4197: directory (absolute path names are not allowed). Despite this restriction, some
                   4198: packages need to install files outside this location; e.g., under ${VARBASE} or
                   4199: ${PKG_SYSCONFDIR}. The only way to achieve this is to create such files during
                   4200: installation time by using installation scripts.
                   4201: 
                   4202: The generic installation scripts are shell scripts that can contain arbitrary
                   4203: code. The list of scripts to execute is taken from the INSTALL_FILE variable,
                   4204: which defaults to INSTALL. A similar variable exists for package removal
                   4205: (DEINSTALL_FILE, whose default is DEINSTALL). These scripts can run arbitrary
                   4206: commands, so they have the potential to create and manage files anywhere in the
                   4207: file system.
                   4208: 
                   4209: Using these general installation files is not recommended, but may be needed in
                   4210: some special cases. One reason for avoiding them is that the user has to trust
                   4211: the packager that there is no unwanted or simply erroneous code included in the
                   4212: installation script. Also, previously there were many similar scripts for the
                   4213: same functionality, and fixing a common error involved finding and changing all
                   4214: of them.
                   4215: 
                   4216: The pkginstall framework offers another, standardized way. It provides generic
                   4217: scripts to abstract the manipulation of such files and directories based on
                   4218: variables set in the package's Makefile. The rest of this section describes
                   4219: these variables.
                   4220: 
1.6       rillig   4221: 15.1.1. Directory manipulation
1.1       dsieger  4222: 
                   4223: The following variables can be set to request the creation of directories
                   4224: anywhere in the file system:
                   4225: 
                   4226:   * MAKE_DIRS and OWN_DIRS contain a list of directories that should be created
                   4227:     and should attempt to be destroyed by the installation scripts. The
                   4228:     difference between the two is that the latter prompts the administrator to
                   4229:     remove any directories that may be left after deinstallation (because they
1.108     rillig   4230:     were not empty), while the former does not. Example:
                   4231: 
                   4232:     MAKE_DIRS+=             ${VARBASE}/foo/private
1.1       dsieger  4233: 
                   4234:   * MAKE_DIRS_PERMS and OWN_DIRS_PERMS contain a list of tuples describing
                   4235:     which directories should be created and should attempt to be destroyed by
                   4236:     the installation scripts. Each tuple holds the following values, separated
                   4237:     by spaces: the directory name, its owner, its group and its numerical mode.
                   4238:     For example:
                   4239: 
1.108     rillig   4240:     MAKE_DIRS_PERMS+=       ${VARBASE}/foo/private \
                   4241:                             ${REAL_ROOT_USER} ${REAL_ROOT_GROUP} 0700
1.1       dsieger  4242: 
                   4243:     The difference between the two is exactly the same as their non-PERMS
                   4244:     counterparts.
                   4245: 
1.6       rillig   4246: 15.1.2. File manipulation
1.1       dsieger  4247: 
                   4248: Creating non-empty files outside the installation prefix is tricky because the
                   4249: PLIST forces all files to be inside it. To overcome this problem, the only
                   4250: solution is to extract the file in the known place (i.e., inside the
                   4251: installation prefix) and copy it to the appropriate location during
                   4252: installation (done by the installation scripts generated by pkginstall). We
                   4253: will call the former the master file in the following paragraphs, which
                   4254: describe the variables that can be used to automatically and consistently
                   4255: handle files outside the installation prefix:
                   4256: 
1.31      wiz      4257:   * CONF_FILES and REQD_FILES are pairs of master and target files. During
1.1       dsieger  4258:     installation time, the master file is copied to the target one if and only
                   4259:     if the latter does not exist. Upon deinstallation, the target file is
                   4260:     removed provided that it was not modified by the installation.
                   4261: 
                   4262:     The difference between the two is that the latter prompts the administrator
                   4263:     to remove any files that may be left after deinstallation (because they
                   4264:     were not empty), while the former does not.
                   4265: 
1.31      wiz      4266:   * CONF_FILES_PERMS and REQD_FILES_PERMS contain tuples describing master
1.1       dsieger  4267:     files as well as their target locations. For each of them, it also
                   4268:     specifies their owner, their group and their numeric permissions, in this
                   4269:     order. For example:
                   4270: 
1.108     rillig   4271:     REQD_FILES_PERMS+=      ${PREFIX}/share/somefile ${VARBASE}/somefile \
                   4272:                             ${REAL_ROOT_USER} ${REAL_ROOT_GROUP} 0700
1.1       dsieger  4273: 
                   4274:     The difference between the two is exactly the same as their non-PERMS
                   4275:     counterparts.
                   4276: 
1.6       rillig   4277: 15.2. Configuration files
1.1       dsieger  4278: 
                   4279: Configuration files are special in the sense that they are installed in their
                   4280: own specific directory, PKG_SYSCONFDIR, and need special treatment during
                   4281: installation (most of which is automated by pkginstall). The main concept you
                   4282: must bear in mind is that files marked as configuration files are automatically
                   4283: copied to the right place (somewhere inside PKG_SYSCONFDIR) during installation
                   4284: if and only if they didn't exist before. Similarly, they will not be removed if
                   4285: they have local modifications. This ensures that administrators never lose any
                   4286: custom changes they may have made.
                   4287: 
1.6       rillig   4288: 15.2.1. How PKG_SYSCONFDIR is set
1.1       dsieger  4289: 
                   4290: As said before, the PKG_SYSCONFDIR variable specifies where configuration files
                   4291: shall be installed. Its contents are set based upon the following variables:
                   4292: 
                   4293:   * PKG_SYSCONFBASE: The configuration's root directory. Defaults to ${PREFIX}/
                   4294:     etc although it may be overridden by the user to point to his preferred
                   4295:     location (e.g., /etc, /etc/pkg, etc.). Packages must not use it directly.
                   4296: 
                   4297:   * PKG_SYSCONFSUBDIR: A subdirectory of PKG_SYSCONFBASE under which the
                   4298:     configuration files for the package being built shall be installed. The
                   4299:     definition of this variable only makes sense in the package's Makefile
                   4300:     (i.e., it is not user-customizable).
                   4301: 
1.68      asau     4302:     As an example, consider the Apache package, www/apache24, which places its
1.1       dsieger  4303:     configuration files under the httpd/ subdirectory of PKG_SYSCONFBASE. This
                   4304:     should be set in the package Makefile.
                   4305: 
                   4306:   * PKG_SYSCONFVAR: Specifies the name of the variable that holds this
                   4307:     package's configuration directory (if different from PKG_SYSCONFBASE). It
                   4308:     defaults to PKGBASE's value, and is always prefixed with PKG_SYSCONFDIR.
                   4309: 
                   4310:   * PKG_SYSCONFDIR.${PKG_SYSCONFVAR}: Holds the directory where the
                   4311:     configuration files for the package identified by PKG_SYSCONFVAR's shall be
                   4312:     placed.
                   4313: 
                   4314: Based on the above variables, pkginstall determines the value of
                   4315: PKG_SYSCONFDIR, which is the only variable that can be used within a package to
                   4316: refer to its configuration directory. The algorithm used to set its value is
                   4317: basically the following:
                   4318: 
                   4319:  1. If PKG_SYSCONFDIR.${PKG_SYSCONFVAR} is set, its value is used.
                   4320: 
                   4321:  2. If the previous variable is not defined but PKG_SYSCONFSUBDIR is set in the
                   4322:     package's Makefile, the resulting value is ${PKG_SYSCONFBASE}/$
                   4323:     {PKG_SYSCONFSUBDIR}.
                   4324: 
                   4325:  3. Otherwise, it is set to ${PKG_SYSCONFBASE}.
                   4326: 
                   4327: It is worth mentioning that ${PKG_SYSCONFDIR} is automatically added to
1.16      jnemeth  4328: OWN_DIRS. See Section 15.1.1, "Directory manipulation" what this means. This
                   4329: does not apply to subdirectories of ${PKG_SYSCONFDIR}, they still have to be
                   4330: created with OWN_DIRS or MAKE_DIRS.
1.1       dsieger  4331: 
1.6       rillig   4332: 15.2.2. Telling the software where configuration files are
1.1       dsieger  4333: 
                   4334: Given that pkgsrc (and users!) expect configuration files to be in a known
                   4335: place, you need to teach each package where it shall install its files. In some
                   4336: cases you will have to patch the package Makefiles to achieve it. If you are
                   4337: lucky, though, it may be as easy as passing an extra flag to the configuration
                   4338: script; this is the case of GNU Autoconf- generated files:
                   4339: 
                   4340: CONFIGURE_ARGS+= --sysconfdir=${PKG_SYSCONFDIR}
                   4341: 
                   4342: Note that this specifies where the package has to look for its configuration
                   4343: files, not where they will be originally installed (although the difference is
                   4344: never explicit, unfortunately).
                   4345: 
1.6       rillig   4346: 15.2.3. Patching installations
1.1       dsieger  4347: 
                   4348: As said before, pkginstall automatically handles configuration files. This
                   4349: means that the packages themselves must not touch the contents of $
                   4350: {PKG_SYSCONFDIR} directly. Bad news is that many software installation scripts
                   4351: will, out of the box, mess with the contents of that directory. So what is the
                   4352: correct procedure to fix this issue?
                   4353: 
                   4354: You must teach the package (usually by manually patching it) to install any
                   4355: configuration files under the examples hierarchy, share/examples/${PKGBASE}/.
                   4356: This way, the PLIST registers them and the administrator always has the
                   4357: original copies available.
                   4358: 
                   4359: Once the required configuration files are in place (i.e., under the examples
                   4360: hierarchy), the pkginstall framework can use them as master copies during the
                   4361: package installation to update what is in ${PKG_SYSCONFDIR}. To achieve this,
                   4362: the variables CONF_FILES and CONF_FILES_PERMS are used. Check out
1.6       rillig   4363: Section 15.1.2, "File manipulation" for information about their syntax and
1.1       dsieger  4364: their purpose. Here is an example, taken from the mail/mutt package:
                   4365: 
                   4366: EGDIR=        ${PREFIX}/share/doc/mutt/samples
                   4367: CONF_FILES=   ${EGDIR}/Muttrc ${PKG_SYSCONFDIR}/Muttrc
                   4368: 
                   4369: Note that the EGDIR variable is specific to that package and has no meaning
                   4370: outside it.
                   4371: 
1.6       rillig   4372: 15.2.4. Disabling handling of configuration files
1.1       dsieger  4373: 
                   4374: The automatic copying of config files can be toggled by setting the environment
                   4375: variable PKG_CONFIG prior to package installation.
                   4376: 
1.6       rillig   4377: 15.3. System startup scripts
1.1       dsieger  4378: 
                   4379: System startup scripts are special files because they must be installed in a
                   4380: place known by the underlying OS, usually outside the installation prefix.
1.6       rillig   4381: Therefore, the same rules described in Section 15.1, "Files and directories
1.1       dsieger  4382: outside the installation prefix" apply, and the same solutions can be used.
                   4383: However, pkginstall provides a special mechanism to handle these files.
                   4384: 
                   4385: In order to provide system startup scripts, the package has to:
                   4386: 
                   4387:  1. Store the script inside ${FILESDIR}, with the .sh suffix appended.
                   4388:     Considering the print/cups package as an example, it has a cupsd.sh in its
                   4389:     files directory.
                   4390: 
                   4391:  2. Tell pkginstall to handle it, appending the name of the script, without its
                   4392:     extension, to the RCD_SCRIPTS variable. Continuing the previous example:
                   4393: 
                   4394:     RCD_SCRIPTS+=   cupsd
                   4395: 
                   4396: Once this is done, pkginstall will do the following steps for each script in an
                   4397: automated fashion:
                   4398: 
                   4399:  1. Process the file found in the files directory applying all the
                   4400:     substitutions described in the FILES_SUBST variable.
                   4401: 
                   4402:  2. Copy the script from the files directory to the examples hierarchy, $
                   4403:     {PREFIX}/share/examples/rc.d/. Note that this master file must be
                   4404:     explicitly registered in the PLIST.
                   4405: 
                   4406:  3. Add code to the installation scripts to copy the startup script from the
                   4407:     examples hierarchy into the system-wide startup scripts directory.
                   4408: 
1.6       rillig   4409: 15.3.1. Disabling handling of system startup scripts
1.1       dsieger  4410: 
                   4411: The automatic copying of config files can be toggled by setting the environment
                   4412: variable PKG_RCD_SCRIPTS prior to package installation. Note that the scripts
                   4413: will be always copied inside the examples hierarchy, ${PREFIX}/share/examples/
                   4414: rc.d/, no matter what the value of this variable is.
                   4415: 
1.6       rillig   4416: 15.4. System users and groups
1.1       dsieger  4417: 
                   4418: If a package needs to create special users and/or groups during installation,
                   4419: it can do so by using the pkginstall framework.
                   4420: 
                   4421: Users can be created by adding entries to the PKG_USERS variable. Each entry
                   4422: has the following syntax:
                   4423: 
                   4424: user:group
                   4425: 
                   4426: Further specification of user details may be done by setting per-user
                   4427: variables. PKG_UID.user is the numeric UID for the user. PKG_GECOS.user is the
                   4428: user's description or comment. PKG_HOME.user is the user's home directory, and
                   4429: defaults to /nonexistent if not specified. PKG_SHELL.user is the user's shell,
                   4430: and defaults to /sbin/nologin if not specified.
                   4431: 
                   4432: Similarly, groups can be created by adding entries to the PKG_GROUPS variable,
                   4433: whose syntax is:
                   4434: 
                   4435: group
                   4436: 
                   4437: The numeric GID of the group may be set by defining PKG_GID.group.
                   4438: 
                   4439: If a package needs to create the users and groups at an earlier stage, then it
1.116     wiz      4440: can set USERGROUP_PHASE to either configure,build, or pre-install to indicate
                   4441: the phase before which the users and groups are created. In this case, the
                   4442: numeric UIDs and GIDs of the created users and groups are automatically
                   4443: hardcoded into the final installation scripts.
1.1       dsieger  4444: 
1.6       rillig   4445: 15.5. System shells
1.1       dsieger  4446: 
                   4447: Packages that install system shells should register them in the shell database,
                   4448: /etc/shells, to make things easier to the administrator. This must be done from
                   4449: the installation scripts to keep binary packages working on any system.
                   4450: pkginstall provides an easy way to accomplish this task.
                   4451: 
                   4452: When a package provides a shell interpreter, it has to set the PKG_SHELL
                   4453: variable to its absolute file name. This will add some hooks to the
                   4454: installation scripts to handle it. Consider the following example, taken from
                   4455: shells/zsh:
                   4456: 
                   4457: PKG_SHELL=      ${PREFIX}/bin/zsh
                   4458: 
1.6       rillig   4459: 15.5.1. Disabling shell registration
1.1       dsieger  4460: 
                   4461: The automatic registration of shell interpreters can be disabled by the
                   4462: administrator by setting the PKG_REGISTER_SHELLS environment variable to NO.
                   4463: 
1.6       rillig   4464: 15.6. Fonts
1.1       dsieger  4465: 
                   4466: Packages that install X11 fonts should update the database files that index the
                   4467: fonts within each fonts directory. This can easily be accomplished within the
                   4468: pkginstall framework.
                   4469: 
                   4470: When a package installs X11 fonts, it must list the directories in which fonts
                   4471: are installed in the FONTS_DIRS.type variables, where type can be one of "ttf",
                   4472: "type1" or "x11". This will add hooks to the installation scripts to run the
                   4473: appropriate commands to update the fonts database files within each of those
                   4474: directories. For convenience, if the directory path is relative, it is taken to
                   4475: be relative to the package's installation prefix. Consider the following
                   4476: example, taken from fonts/dbz-ttf:
                   4477: 
1.67      wiz      4478: FONTS_DIRS.ttf= ${PREFIX}/share/fonts/X11/TTF
1.1       dsieger  4479: 
1.6       rillig   4480: 15.6.1. Disabling automatic update of the fonts databases
1.1       dsieger  4481: 
                   4482: The automatic update of fonts databases can be disabled by the administrator by
                   4483: setting the PKG_UPDATE_FONTS_DB environment variable to NO.
                   4484: 
1.6       rillig   4485: Chapter 16. Options handling
1.1       dsieger  4486: 
                   4487: Table of Contents
                   4488: 
1.6       rillig   4489: 16.1. Global default options
                   4490: 16.2. Converting packages to use bsd.options.mk
                   4491: 16.3. Option Names
1.7       rillig   4492: 16.4. Determining the options of dependencies
1.1       dsieger  4493: 
                   4494: Many packages have the ability to be built to support different sets of
                   4495: features. bsd.options.mk is a framework in pkgsrc that provides generic
                   4496: handling of those options that determine different ways in which the packages
                   4497: can be built. It's possible for the user to specify exactly which sets of
                   4498: options will be built into a package or to allow a set of global default
                   4499: options apply.
                   4500: 
1.7       rillig   4501: There are two broad classes of behaviors that one might want to control via
                   4502: options. One is whether some particular feature is enabled in a program that
                   4503: will be built anyway, often by including or not including a dependency on some
                   4504: other package. The other is whether or not an additional program will be built
                   4505: as part of the package. Generally, it is better to make a split package for
                   4506: such additional programs instead of using options, because it enables binary
                   4507: packages to be built which can then be added separately. For example, the foo
                   4508: package might have minimal dependencies (those packages without which foo
                   4509: doesn't make sense), and then the foo-gfoo package might include the GTK
                   4510: frontend program gfoo. This is better than including a gtk option to foo that
                   4511: adds gfoo, because either that option is default, in which case binary users
                   4512: can't get foo without gfoo, or not default, in which case they can't get gfoo.
                   4513: With split packages, they can install foo without having GTK, and later decide
                   4514: to install gfoo (pulling in GTK at that time). This is an advantage to source
                   4515: users too, avoiding the need for rebuilds.
                   4516: 
                   4517: Plugins with widely varying dependencies should usually be split instead of
                   4518: options.
                   4519: 
                   4520: It is often more work to maintain split packages, especially if the upstream
                   4521: package does not support this. The decision of split vs. option should be made
                   4522: based on the likelihood that users will want or object to the various pieces,
                   4523: the size of the dependencies that are included, and the amount of work.
                   4524: 
                   4525: A further consideration is licensing. Non-free parts, or parts that depend on
                   4526: non-free dependencies (especially plugins) should almost always be split if
                   4527: feasible.
                   4528: 
1.6       rillig   4529: 16.1. Global default options
1.1       dsieger  4530: 
                   4531: Global default options are listed in PKG_DEFAULT_OPTIONS, which is a list of
                   4532: the options that should be built into every package if that option is
1.4       rillig   4533: supported. This variable should be set in mk.conf.
1.1       dsieger  4534: 
1.6       rillig   4535: 16.2. Converting packages to use bsd.options.mk
1.1       dsieger  4536: 
                   4537: The following example shows how bsd.options.mk should be used by the
                   4538: hypothetical ``wibble'' package, either in the package Makefile, or in a file,
                   4539: e.g. options.mk, that is included by the main package Makefile.
                   4540: 
                   4541: PKG_OPTIONS_VAR=                PKG_OPTIONS.wibble
                   4542: PKG_SUPPORTED_OPTIONS=          wibble-foo ldap
                   4543: PKG_OPTIONS_OPTIONAL_GROUPS=    database
                   4544: PKG_OPTIONS_GROUP.database=     mysql pgsql
                   4545: PKG_SUGGESTED_OPTIONS=          wibble-foo
                   4546: PKG_OPTIONS_LEGACY_VARS+=       WIBBLE_USE_OPENLDAP:ldap
                   4547: PKG_OPTIONS_LEGACY_OPTS+=       foo:wibble-foo
                   4548: 
                   4549: .include "../../mk/bsd.prefs.mk"
                   4550: 
                   4551: # this package was previously named wibble2
                   4552: .if defined(PKG_OPTIONS.wibble2)
                   4553: PKG_LEGACY_OPTIONS+=            ${PKG_OPTIONS.wibble2}
                   4554: PKG_OPTIONS_DEPRECATED_WARNINGS+= \
                   4555:         "Deprecated variable PKG_OPTIONS.wibble2 used, use ${PKG_OPTIONS_VAR} instead."
                   4556: .endif
                   4557: 
                   4558: .include "../../mk/bsd.options.mk"
                   4559: 
                   4560: # Package-specific option-handling
                   4561: 
                   4562: ###
                   4563: ### FOO support
                   4564: ###
                   4565: .if !empty(PKG_OPTIONS:Mwibble-foo)
                   4566: CONFIGURE_ARGS+=    --enable-foo
                   4567: .endif
                   4568: 
                   4569: ###
                   4570: ### LDAP support
                   4571: ###
                   4572: .if !empty(PKG_OPTIONS:Mldap)
                   4573: .  include "../../databases/openldap-client/buildlink3.mk"
                   4574: CONFIGURE_ARGS+=    --enable-ldap=${BUILDLINK_PREFIX.openldap-client}
                   4575: .endif
                   4576: 
                   4577: ###
                   4578: ### database support
                   4579: ###
                   4580: .if !empty(PKG_OPTIONS:Mmysql)
                   4581: .  include "../../mk/mysql.buildlink3.mk"
                   4582: .endif
                   4583: .if !empty(PKG_OPTIONS:Mpgsql)
                   4584: .  include "../../mk/pgsql.buildlink3.mk"
                   4585: .endif
                   4586: 
                   4587: The first section contains the information about which build options are
                   4588: supported by the package, and any default options settings if needed.
                   4589: 
                   4590:  1. PKG_OPTIONS_VAR is the name of the make(1) variable that the user can set
                   4591:     to override the default options. It should be set to PKG_OPTIONS.pkgbase.
                   4592:     Do not set it to PKG_OPTIONS.${PKGBASE}, since PKGBASE is not defined at
                   4593:     the point where the options are processed.
                   4594: 
                   4595:  2. PKG_SUPPORTED_OPTIONS is a list of build options supported by the package.
                   4596: 
                   4597:  3. PKG_OPTIONS_OPTIONAL_GROUPS is a list of names of groups of mutually
                   4598:     exclusive options. The options in each group are listed in
                   4599:     PKG_OPTIONS_GROUP.groupname. The most specific setting of any option from
                   4600:     the group takes precedence over all other options in the group. Options
                   4601:     from the groups will be automatically added to PKG_SUPPORTED_OPTIONS.
                   4602: 
                   4603:  4. PKG_OPTIONS_REQUIRED_GROUPS is like PKG_OPTIONS_OPTIONAL_GROUPS, but
                   4604:     building the packages will fail if no option from the group is selected.
                   4605: 
                   4606:  5. PKG_OPTIONS_NONEMPTY_SETS is a list of names of sets of options. At least
                   4607:     one option from each set must be selected. The options in each set are
                   4608:     listed in PKG_OPTIONS_SET.setname. Options from the sets will be
                   4609:     automatically added to PKG_SUPPORTED_OPTIONS. Building the package will
                   4610:     fail if no option from the set is selected.
                   4611: 
                   4612:  6. PKG_SUGGESTED_OPTIONS is a list of build options which are enabled by
                   4613:     default.
                   4614: 
                   4615:  7. PKG_OPTIONS_LEGACY_VARS is a list of "USE_VARIABLE:option" pairs that map
1.4       rillig   4616:     legacy mk.conf variables to their option counterparts. Pairs should be
1.1       dsieger  4617:     added with "+=" to keep the listing of global legacy variables. A warning
                   4618:     will be issued if the user uses a legacy variable.
                   4619: 
                   4620:  8. PKG_OPTIONS_LEGACY_OPTS is a list of "old-option:new-option" pairs that map
                   4621:     options that have been renamed to their new counterparts. Pairs should be
                   4622:     added with "+=" to keep the listing of global legacy options. A warning
                   4623:     will be issued if the user uses a legacy option.
                   4624: 
                   4625:  9. PKG_LEGACY_OPTIONS is a list of options implied by deprecated variables
                   4626:     used. This can be used for cases that neither PKG_OPTIONS_LEGACY_VARS nor
                   4627:     PKG_OPTIONS_LEGACY_OPTS can handle, e. g. when PKG_OPTIONS_VAR is renamed.
                   4628: 
                   4629: 10. PKG_OPTIONS_DEPRECATED_WARNINGS is a list of warnings about deprecated
                   4630:     variables or options used, and what to use instead.
                   4631: 
                   4632: A package should never modify PKG_DEFAULT_OPTIONS or the variable named in
                   4633: PKG_OPTIONS_VAR. These are strictly user-settable. To suggest a default set of
                   4634: options, use PKG_SUGGESTED_OPTIONS.
                   4635: 
                   4636: PKG_OPTIONS_VAR must be defined before including bsd.options.mk. If none of
                   4637: PKG_SUPPORTED_OPTIONS, PKG_OPTIONS_OPTIONAL_GROUPS, and
                   4638: PKG_OPTIONS_REQUIRED_GROUPS are defined (as can happen with platform-specific
                   4639: options if none of them is supported on the current platform), PKG_OPTIONS is
                   4640: set to the empty list and the package is otherwise treated as not using the
                   4641: options framework.
                   4642: 
                   4643: After the inclusion of bsd.options.mk, the variable PKG_OPTIONS contains the
                   4644: list of selected build options, properly filtered to remove unsupported and
                   4645: duplicate options.
                   4646: 
                   4647: The remaining sections contain the logic that is specific to each option. The
                   4648: correct way to check for an option is to check whether it is listed in
                   4649: PKG_OPTIONS:
                   4650: 
                   4651: .if !empty(PKG_OPTIONS:Moption)
                   4652: 
1.6       rillig   4653: 16.3. Option Names
1.1       dsieger  4654: 
                   4655: Options that enable similar features in different packages (like optional
                   4656: support for a library) should use a common name in all packages that support it
                   4657: (like the name of the library). If another package already has an option with
                   4658: the same meaning, use the same name.
                   4659: 
                   4660: Options that enable features specific to one package, where it's unlikely that
                   4661: another (unrelated) package has the same (or a similar) optional feature,
                   4662: should use a name prefixed with pkgname-.
                   4663: 
                   4664: If a group of related packages share an optional feature specific to that
                   4665: group, prefix it with the name of the "main" package (e. g.
                   4666: djbware-errno-hack).
                   4667: 
                   4668: For new options, add a line to mk/defaults/options.description. Lines have two
                   4669: fields, separated by tab. The first field is the option name, the second its
                   4670: description. The description should be a whole sentence (starting with an
                   4671: uppercase letter and ending with a period) that describes what enabling the
                   4672: option does. E. g. "Enable ispell support." The file is sorted by option names.
                   4673: 
1.7       rillig   4674: 16.4. Determining the options of dependencies
                   4675: 
                   4676: When writing buildlink3.mk files, it is often necessary to list different
                   4677: dependencies based on the options with which the package was built. For
                   4678: querying these options, the file pkgsrc/mk/pkg-build-options.mk should be used.
                   4679: A typical example looks like this:
                   4680: 
                   4681: pkgbase := libpurple
                   4682: .include "../../mk/pkg-build-options.mk"
                   4683: 
                   4684: .if !empty(PKG_BUILD_OPTIONS.libpurple:Mdbus)
                   4685: ...
                   4686: .endif
                   4687: 
                   4688: Including pkg-build-options.mk here will set the variable
                   4689: PKG_BUILD_OPTIONS.libpurple to the build options of the libpurple package,
                   4690: which can then be queried like PKG_OPTIONS in the options.mk file. See the file
                   4691: pkg-build-options.mk for more details.
                   4692: 
1.6       rillig   4693: Chapter 17. The build process
1.1       dsieger  4694: 
                   4695: Table of Contents
                   4696: 
1.6       rillig   4697: 17.1. Introduction
                   4698: 17.2. Program location
                   4699: 17.3. Directories used during the build process
                   4700: 17.4. Running a phase
                   4701: 17.5. The fetch phase
                   4702: 
                   4703:     17.5.1. What to fetch and where to get it from
                   4704:     17.5.2. How are the files fetched?
                   4705: 
                   4706: 17.6. The checksum phase
                   4707: 17.7. The extract phase
                   4708: 17.8. The patch phase
                   4709: 17.9. The tools phase
                   4710: 17.10. The wrapper phase
                   4711: 17.11. The configure phase
                   4712: 17.12. The build phase
                   4713: 17.13. The test phase
                   4714: 17.14. The install phase
                   4715: 17.15. The package phase
                   4716: 17.16. Cleaning up
                   4717: 17.17. Other helpful targets
1.1       dsieger  4718: 
1.6       rillig   4719: 17.1. Introduction
1.1       dsieger  4720: 
                   4721: This chapter gives a detailed description on how a package is built. Building a
                   4722: package is separated into different phases (for example fetch, build, install),
1.19      snj      4723: all of which are described in the following sections. Each phase is split into
                   4724: so-called stages, which take the name of the containing phase, prefixed by one
                   4725: of pre-, do- or post-. (Examples are pre-configure, post-build.) Most of the
                   4726: actual work is done in the do-* stages.
1.1       dsieger  4727: 
                   4728: Never override the regular targets (like fetch), if you have to, override the
                   4729: do-* ones instead.
                   4730: 
                   4731: The basic steps for building a program are always the same. First the program's
                   4732: source (distfile) must be brought to the local system and then extracted. After
                   4733: any pkgsrc-specific patches to compile properly are applied, the software can
                   4734: be configured, then built (usually by compiling), and finally the generated
                   4735: binaries, etc. can be put into place on the system.
                   4736: 
                   4737: To get more details about what is happening at each step, you can set the
                   4738: PKG_VERBOSE variable, or the PATCH_DEBUG variable if you are just interested in
                   4739: more details about the patch step.
                   4740: 
1.6       rillig   4741: 17.2. Program location
1.1       dsieger  4742: 
                   4743: Before outlining the process performed by the NetBSD package system in the next
                   4744: section, here's a brief discussion on where programs are installed, and which
                   4745: variables influence this.
                   4746: 
                   4747: The automatic variable PREFIX indicates where all files of the final program
                   4748: shall be installed. It is usually set to LOCALBASE (/usr/pkg), or CROSSBASE for
                   4749: pkgs in the cross category. The value of PREFIX needs to be put into the
                   4750: various places in the program's source where paths to these files are encoded.
1.6       rillig   4751: See Section 11.3, "patches/*" and Section 19.3.1, "Shared libraries - libtool"
1.1       dsieger  4752: for more details.
                   4753: 
                   4754: When choosing which of these variables to use, follow the following rules:
                   4755: 
                   4756:   * PREFIX always points to the location where the current pkg will be
1.25      wiz      4757:     installed. When referring to a pkg's own installation path, use "${PREFIX}"
                   4758:     .
1.1       dsieger  4759: 
                   4760:   * LOCALBASE is where all non-X11 pkgs are installed. If you need to construct
                   4761:     a -I or -L argument to the compiler to find includes and libraries
                   4762:     installed by another non-X11 pkg, use "${LOCALBASE}". The name LOCALBASE
                   4763:     stems from FreeBSD, which installed all packages in /usr/local. As pkgsrc
                   4764:     leaves /usr/local for the system administrator, this variable is a
                   4765:     misnomer.
                   4766: 
                   4767:   * X11BASE is where the actual X11 distribution (from xsrc, etc.) is
                   4768:     installed. When looking for standard X11 includes (not those installed by a
                   4769:     package), use "${X11BASE}".
                   4770: 
1.99      sevan    4771:   * X11-based packages using imake must set USE_IMAKE to be installed correctly
                   4772:     under LOCALBASE.
1.1       dsieger  4773: 
1.99      sevan    4774:   * To determine the prefix of an installed package, the EVAL_PREFIX definition
                   4775:     can be used. It takes pairs in the format "DIRNAME=<package>", and the make
                   4776:     (1) variable DIRNAME will be set to the prefix of the installed package
                   4777:     <package>, or "${PREFIX}" if the package is not installed.
1.1       dsieger  4778: 
                   4779:     This is best illustrated by example.
                   4780: 
                   4781:     The following lines are taken from pkgsrc/wm/scwm/Makefile:
                   4782: 
                   4783:     EVAL_PREFIX+=           GTKDIR=gtk+
                   4784:     CONFIGURE_ARGS+=        --with-guile-prefix=${LOCALBASE:Q}
                   4785:     CONFIGURE_ARGS+=        --with-gtk-prefix=${GTKDIR:Q}
                   4786:     CONFIGURE_ARGS+=        --enable-multibyte
                   4787: 
                   4788:     Specific defaults can be defined for the packages evaluated using
                   4789:     EVAL_PREFIX, by using a definition of the form:
                   4790: 
                   4791:     GTKDIR_DEFAULT= ${LOCALBASE}
                   4792: 
                   4793:     where GTKDIR corresponds to the first definition in the EVAL_PREFIX pair.
                   4794: 
                   4795:   * Within ${PREFIX}, packages should install files according to hier(7), with
                   4796:     the exception that manual pages go into ${PREFIX}/man, not ${PREFIX}/share/
                   4797:     man.
                   4798: 
1.6       rillig   4799: 17.3. Directories used during the build process
1.1       dsieger  4800: 
1.14      jmcneill 4801: When building a package, various directories are used to store source files,
1.1       dsieger  4802: temporary files, pkgsrc-internal files, and so on. These directories are
                   4803: explained here.
                   4804: 
                   4805: Some of the directory variables contain relative pathnames. There are two
                   4806: common base directories for these relative directories: PKGSRCDIR/PKGPATH is
                   4807: used for directories that are pkgsrc-specific. WRKSRC is used for directories
                   4808: inside the package itself.
                   4809: 
                   4810: PKGSRCDIR
                   4811: 
                   4812:     This is an absolute pathname that points to the pkgsrc root directory.
                   4813:     Generally, you don't need it.
                   4814: 
                   4815: PKGDIR
                   4816: 
                   4817:     This is an absolute pathname that points to the current package.
                   4818: 
                   4819: PKGPATH
                   4820: 
                   4821:     This is a pathname relative to PKGSRCDIR that points to the current
                   4822:     package.
                   4823: 
                   4824: WRKDIR
                   4825: 
                   4826:     This is an absolute pathname pointing to the directory where all work takes
                   4827:     place. The distfiles are extracted to this directory. It also contains
                   4828:     temporary directories and log files used by the various pkgsrc frameworks,
                   4829:     like buildlink or the wrappers.
                   4830: 
                   4831: WRKSRC
                   4832: 
                   4833:     This is an absolute pathname pointing to the directory where the distfiles
                   4834:     are extracted. It is usually a direct subdirectory of WRKDIR, and often
                   4835:     it's the only directory entry that isn't hidden. This variable may be
                   4836:     changed by a package Makefile.
                   4837: 
1.14      jmcneill 4838: The CREATE_WRKDIR_SYMLINK definition takes either the value yes or no and
1.15      rillig   4839: defaults to no. It indicates whether a symbolic link to the WRKDIR is to be
1.14      jmcneill 4840: created in the pkgsrc entry's directory. If users would like to have their
                   4841: pkgsrc trees behave in a read-only manner, then the value of
                   4842: CREATE_WRKDIR_SYMLINK should be set to no.
                   4843: 
1.6       rillig   4844: 17.4. Running a phase
1.1       dsieger  4845: 
                   4846: You can run a particular phase by typing make phase, where phase is the name of
                   4847: the phase. This will automatically run all phases that are required for this
                   4848: phase. The default phase is build, that is, when you run make without
                   4849: parameters in a package directory, the package will be built, but not
                   4850: installed.
                   4851: 
1.6       rillig   4852: 17.5. The fetch phase
1.1       dsieger  4853: 
                   4854: The first step in building a package is to fetch the distribution files
1.25      wiz      4855: (distfiles) from the sites that are providing them. This is the task of the 
1.1       dsieger  4856: fetch phase.
                   4857: 
1.6       rillig   4858: 17.5.1. What to fetch and where to get it from
1.1       dsieger  4859: 
                   4860: In simple cases, MASTER_SITES defines all URLs from where the distfile, whose
                   4861: name is derived from the DISTNAME variable, is fetched. The more complicated
                   4862: cases are described below.
                   4863: 
                   4864: The variable DISTFILES specifies the list of distfiles that have to be fetched.
1.66      asau     4865: Its value defaults to ${DEFAULT_DISTFILES} and its value is ${DISTNAME}$
                   4866: {EXTRACT_SUFX}, so that most packages don't need to define it at all.
                   4867: EXTRACT_SUFX is .tar.gz by default, but can be changed freely. Note that if
                   4868: your package requires additional distfiles to the default one, you cannot just
                   4869: append the additional filenames using the += operator, but you have write for
                   4870: example:
1.1       dsieger  4871: 
1.66      asau     4872: DISTFILES=      ${DEFAULT_DISTFILES} additional-files.tar.gz
1.1       dsieger  4873: 
                   4874: Each distfile is fetched from a list of sites, usually MASTER_SITES. If the
                   4875: package has multiple DISTFILES or multiple PATCHFILES from different sites, you
                   4876: can set SITES.distfile to the list of URLs where the file distfile (including
                   4877: the suffix) can be found.
                   4878: 
                   4879: DISTFILES=      ${DISTNAME}${EXTRACT_SUFX}
                   4880: DISTFILES+=     foo-file.tar.gz
                   4881: SITES.foo-file.tar.gz= \
                   4882: http://www.somewhere.com/somehow/ \
                   4883: http://www.somewhereelse.com/mirror/somehow/
                   4884: 
                   4885: When actually fetching the distfiles, each item from MASTER_SITES or SITES.*
                   4886: gets the name of each distfile appended to it, without an intermediate slash.
                   4887: Therefore, all site values have to end with a slash or other separator
                   4888: character. This allows for example to set MASTER_SITES to a URL of a CGI script
                   4889: that gets the name of the distfile as a parameter. In this case, the definition
                   4890: would look like:
                   4891: 
                   4892: MASTER_SITES=   http://www.example.com/download.cgi?file=
                   4893: 
1.23      jakllsch 4894: The exception to this rule are URLs starting with a dash. In that case the URL
                   4895: is taken as is, fetched and the result stored under the name of the distfile.
1.66      asau     4896: You can use this style for the case when the download URL style does not match
                   4897: the above common case. For example, if permanent download URL is a redirector
                   4898: to the real download URL, or the download file name is offered by an HTTP
                   4899: Content-Disposition header. In the following example, foo-1.0.0.tar.gz will be
                   4900: created instead of the default v1.0.0.tar.gz.
                   4901: 
                   4902: DISTNAME=       foo-1.0.0
                   4903: MASTER_SITES=   -http://www.example.com/archive/v1.0.0.tar.gz
1.23      jakllsch 4904: 
1.1       dsieger  4905: There are some predefined values for MASTER_SITES, which can be used in
                   4906: packages. The names of the variables should speak for themselves.
                   4907: 
                   4908: ${MASTER_SITE_APACHE}
                   4909: ${MASTER_SITE_BACKUP}
                   4910: ${MASTER_SITE_CYGWIN}
                   4911: ${MASTER_SITE_DEBIAN}
                   4912: ${MASTER_SITE_FREEBSD}
                   4913: ${MASTER_SITE_FREEBSD_LOCAL}
                   4914: ${MASTER_SITE_GENTOO}
                   4915: ${MASTER_SITE_GNOME}
                   4916: ${MASTER_SITE_GNU}
                   4917: ${MASTER_SITE_GNUSTEP}
1.66      asau     4918: ${MASTER_SITE_HASKELL_HACKAGE}
1.1       dsieger  4919: ${MASTER_SITE_IFARCHIVE}
                   4920: ${MASTER_SITE_KDE}
                   4921: ${MASTER_SITE_MOZILLA}
1.66      asau     4922: ${MASTER_SITE_MOZILLA_ALL}
                   4923: ${MASTER_SITE_MOZILLA_ESR}
1.1       dsieger  4924: ${MASTER_SITE_MYSQL}
1.66      asau     4925: ${MASTER_SITE_NETLIB}
1.1       dsieger  4926: ${MASTER_SITE_OPENOFFICE}
1.98      ryoon    4927: ${MASTER_SITE_OSDN}
1.1       dsieger  4928: ${MASTER_SITE_PERL_CPAN}
                   4929: ${MASTER_SITE_PGSQL}
1.66      asau     4930: ${MASTER_SITE_RUBYGEMS}
1.1       dsieger  4931: ${MASTER_SITE_R_CRAN}
                   4932: ${MASTER_SITE_SOURCEFORGE}
                   4933: ${MASTER_SITE_SUNSITE}
                   4934: ${MASTER_SITE_SUSE}
                   4935: ${MASTER_SITE_TEX_CTAN}
                   4936: ${MASTER_SITE_XCONTRIB}
                   4937: ${MASTER_SITE_XEMACS}
1.66      asau     4938: ${MASTER_SITE_XORG}
1.1       dsieger  4939: 
                   4940: Some explanations for the less self-explaining ones: MASTER_SITE_BACKUP
                   4941: contains backup sites for packages that are maintained in ftp://ftp.NetBSD.org/
1.27      wiz      4942: pub/pkgsrc/distfiles/${DIST_SUBDIR}. MASTER_SITE_LOCAL contains local package
1.26      spz      4943: source distributions that are maintained in ftp://ftp.NetBSD.org/pub/pkgsrc/
                   4944: distfiles/LOCAL_PORTS/.
1.1       dsieger  4945: 
                   4946: If you choose one of these predefined sites, you may want to specify a
                   4947: subdirectory of that site. Since these macros may expand to more than one
                   4948: actual site, you must use the following construct to specify a subdirectory:
                   4949: 
                   4950: MASTER_SITES=   ${MASTER_SITE_GNU:=subdirectory/name/}
                   4951: MASTER_SITES=   ${MASTER_SITE_SOURCEFORGE:=project_name/}
                   4952: 
                   4953: Note the trailing slash after the subdirectory name.
                   4954: 
1.6       rillig   4955: 17.5.2. How are the files fetched?
1.1       dsieger  4956: 
                   4957: The fetch phase makes sure that all the distfiles exist in a local directory
                   4958: (DISTDIR, which can be set by the pkgsrc user). If the files do not exist, they
                   4959: are fetched using commands of the form
                   4960: 
                   4961: ${FETCH_CMD} ${FETCH_BEFORE_ARGS} ${site}${file} ${FETCH_AFTER_ARGS}
                   4962: 
                   4963: where ${site} varies through several possibilities in turn: first,
                   4964: MASTER_SITE_OVERRIDE is tried, then the sites specified in either SITES.file if
                   4965: defined, else MASTER_SITES or PATCH_SITES, as applies, then finally the value
                   4966: of MASTER_SITE_BACKUP. The order of all except the first and the last can be
                   4967: optionally sorted by the user, via setting either MASTER_SORT_RANDOM, and
                   4968: MASTER_SORT_AWK or MASTER_SORT_REGEX.
                   4969: 
1.16      jnemeth  4970: The specific command and arguments used depend on the FETCH_USING parameter.
                   4971: The example above is for FETCH_USING=custom.
                   4972: 
1.1       dsieger  4973: The distfiles mirror run by the NetBSD Foundation uses the mirror-distfiles
                   4974: target to mirror the distfiles, if they are freely distributable. Packages
                   4975: setting NO_SRC_ON_FTP (usually to "${RESTRICTED}") will not have their
                   4976: distfiles mirrored.
                   4977: 
1.6       rillig   4978: 17.6. The checksum phase
1.1       dsieger  4979: 
                   4980: After the distfile(s) are fetched, their checksum is generated and compared
                   4981: with the checksums stored in the distinfo file. If the checksums don't match,
                   4982: the build is aborted. This is to ensure the same distfile is used for building,
                   4983: and that the distfile wasn't changed, e.g. by some malign force, deliberately
                   4984: changed distfiles on the master distribution site or network lossage.
                   4985: 
1.6       rillig   4986: 17.7. The extract phase
1.1       dsieger  4987: 
                   4988: When the distfiles are present on the local system, they need to be extracted,
                   4989: as they usually come in the form of some compressed archive format.
                   4990: 
                   4991: By default, all DISTFILES are extracted. If you only need some of them, you can
                   4992: set the EXTRACT_ONLY variable to the list of those files.
                   4993: 
                   4994: Extracting the files is usually done by a little program, mk/extract/extract,
                   4995: which already knows how to extract various archive formats, so most likely you
                   4996: will not need to change anything here. But if you need, the following variables
                   4997: may help you:
                   4998: 
                   4999: EXTRACT_OPTS_{BIN,LHA,PAX,RAR,TAR,ZIP,ZOO}
                   5000: 
                   5001:     Use these variables to override the default options for an extract command,
                   5002:     which are defined in mk/extract/extract.
                   5003: 
                   5004: EXTRACT_USING
                   5005: 
1.14      jmcneill 5006:     This variable can be set to bsdtar, gtar, nbtar (which is the default
                   5007:     value), pax, or an absolute pathname pointing to the command with which tar
                   5008:     archives should be extracted. It is preferred to choose bsdtar over gtar if
                   5009:     NetBSD's pax-as-tar is not good enough.
1.1       dsieger  5010: 
                   5011: If the extract program doesn't serve your needs, you can also override the
                   5012: EXTRACT_CMD variable, which holds the command used for extracting the files.
                   5013: This command is executed in the ${WRKSRC} directory. During execution of this
                   5014: command, the shell variable extract_file holds the absolute pathname of the
                   5015: file that is going to be extracted.
                   5016: 
                   5017: And if that still does not suffice, you can override the do-extract target in
                   5018: the package Makefile.
                   5019: 
1.6       rillig   5020: 17.8. The patch phase
1.1       dsieger  5021: 
                   5022: After extraction, all the patches named by the PATCHFILES, those present in the
                   5023: patches subdirectory of the package as well as in $LOCALPATCHES/$PKGPATH (e.g.
                   5024: /usr/local/patches/graphics/png) are applied. Patchfiles ending in .Z or .gz
                   5025: are uncompressed before they are applied, files ending in .orig or .rej are
                   5026: ignored. Any special options to patch(1) can be handed in PATCH_DIST_ARGS. See
1.6       rillig   5027: Section 11.3, "patches/*" for more details.
1.1       dsieger  5028: 
                   5029: By default patch(1) is given special args to make it fail if the patches apply
                   5030: with some lines of fuzz. Please fix (regen) the patches so that they apply
                   5031: cleanly. The rationale behind this is that patches that don't apply cleanly may
                   5032: end up being applied in the wrong place, and cause severe harm there.
                   5033: 
1.6       rillig   5034: 17.9. The tools phase
1.1       dsieger  5035: 
1.6       rillig   5036: This is covered in Chapter 18, Tools needed for building or running.
1.1       dsieger  5037: 
1.6       rillig   5038: 17.10. The wrapper phase
1.1       dsieger  5039: 
                   5040: This phase creates wrapper programs for the compilers and linkers. The
                   5041: following variables can be used to tweak the wrappers.
                   5042: 
                   5043: ECHO_WRAPPER_MSG
                   5044: 
                   5045:     The command used to print progress messages. Does nothing by default. Set
                   5046:     to ${ECHO} to see the progress messages.
                   5047: 
                   5048: WRAPPER_DEBUG
                   5049: 
                   5050:     This variable can be set to yes (default) or no, depending on whether you
                   5051:     want additional information in the wrapper log file.
                   5052: 
                   5053: WRAPPER_UPDATE_CACHE
                   5054: 
                   5055:     This variable can be set to yes or no, depending on whether the wrapper
                   5056:     should use its cache, which will improve the speed. The default value is
                   5057:     yes, but is forced to no if the platform does not support it.
                   5058: 
                   5059: WRAPPER_REORDER_CMDS
                   5060: 
                   5061:     A list of reordering commands. A reordering command has the form reorder:l:
                   5062:     lib1:lib2. It ensures that that -llib1 occurs before -llib2.
                   5063: 
                   5064: WRAPPER_TRANSFORM_CMDS
                   5065: 
                   5066:     A list of transformation commands. [TODO: investigate further]
                   5067: 
1.6       rillig   5068: 17.11. The configure phase
1.1       dsieger  5069: 
                   5070: Most pieces of software need information on the header files, system calls, and
                   5071: library routines which are available on the platform they run on. The process
                   5072: of determining this information is known as configuration, and is usually
                   5073: automated. In most cases, a script is supplied with the distfiles, and its
                   5074: invocation results in generation of header files, Makefiles, etc.
                   5075: 
                   5076: If the package contains a configure script, this can be invoked by setting
                   5077: HAS_CONFIGURE to "yes". If the configure script is a GNU autoconf script, you
                   5078: should set GNU_CONFIGURE to "yes" instead. What happens in the configure phase
                   5079: is roughly:
                   5080: 
                   5081: .for d in ${CONFIGURE_DIRS}
                   5082:         cd ${WRKSRC} \
                   5083:         && cd ${d} \
                   5084:         && env ${CONFIGURE_ENV} ${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}
                   5085: .endfor
                   5086: 
                   5087: CONFIGURE_DIRS (default: ".") is a list of pathnames relative to WRKSRC. In
                   5088: each of these directories, the configure script is run with the environment
                   5089: CONFIGURE_ENV and arguments CONFIGURE_ARGS. The variables CONFIGURE_ENV,
                   5090: CONFIGURE_SCRIPT (default: "./configure") and CONFIGURE_ARGS may all be changed
                   5091: by the package.
                   5092: 
1.38      wiz      5093: If the program uses the Perl way of configuration (mainly Perl modules, but not
                   5094: only), i.e. a file called Makefile.PL, it should include ../../lang/perl5/
                   5095: module.mk. To set any parameter for Makefile.PL use the MAKE_PARAMS variable
                   5096: (e.g., MAKE_PARAMS+=foo=bar
                   5097: 
1.1       dsieger  5098: If the program uses an Imakefile for configuration, the appropriate steps can
1.99      sevan    5099: be invoked by setting USE_IMAKE to "yes". If you only need xmkmf, add it to
                   5100: USE_TOOLS. You can add variables to xmkmf's environment by adding them to the
                   5101: SCRIPTS_ENV variable.
1.1       dsieger  5102: 
1.11      rillig   5103: If the program uses cmake for configuration, the appropriate steps can be
                   5104: invoked by setting USE_CMAKE to "yes". You can add variables to cmake's
                   5105: environment by adding them to the CONFIGURE_ENV variable and arguments to cmake
                   5106: by adding them to the CMAKE_ARGS variable. The top directory argument is given
                   5107: by the CMAKE_ARG_PATH variable, that defaults to "." (relative to
                   5108: CONFIGURE_DIRS)
                   5109: 
1.1       dsieger  5110: If there is no configure step at all, set NO_CONFIGURE to "yes".
                   5111: 
1.6       rillig   5112: 17.12. The build phase
1.1       dsieger  5113: 
                   5114: For building a package, a rough equivalent of the following code is executed.
                   5115: 
                   5116: .for d in ${BUILD_DIRS}
                   5117:         cd ${WRKSRC} \
                   5118:         && cd ${d} \
                   5119:         && env ${MAKE_ENV} \
                   5120:             ${MAKE_PROGRAM} ${BUILD_MAKE_FLAGS} \
                   5121:                 -f ${MAKE_FILE} \
                   5122:                 ${BUILD_TARGET}
                   5123: .endfor
                   5124: 
                   5125: BUILD_DIRS (default: ".") is a list of pathnames relative to WRKSRC. In each of
                   5126: these directories, MAKE_PROGRAM is run with the environment MAKE_ENV and
                   5127: arguments BUILD_MAKE_FLAGS. The variables MAKE_ENV, BUILD_MAKE_FLAGS, MAKE_FILE
                   5128: and BUILD_TARGET may all be changed by the package.
                   5129: 
1.25      wiz      5130: The default value of MAKE_PROGRAM is "gmake" if USE_TOOLS contains "gmake", "
                   5131: make" otherwise. The default value of MAKE_FILE is "Makefile", and BUILD_TARGET
                   5132: defaults to "all".
1.1       dsieger  5133: 
                   5134: If there is no build step at all, set NO_BUILD to "yes".
                   5135: 
1.6       rillig   5136: 17.13. The test phase
1.1       dsieger  5137: 
                   5138: [TODO]
                   5139: 
1.6       rillig   5140: 17.14. The install phase
1.1       dsieger  5141: 
                   5142: Once the build stage has completed, the final step is to install the software
                   5143: in public directories, so users can access the programs and files.
                   5144: 
                   5145: In the install phase, a rough equivalent of the following code is executed.
                   5146: Additionally, before and after this code, much magic is performed to do
                   5147: consistency checks, registering the package, and so on.
                   5148: 
                   5149: .for d in ${INSTALL_DIRS}
                   5150:         cd ${WRKSRC} \
                   5151:         && cd ${d} \
                   5152:         && env ${MAKE_ENV} \
                   5153:             ${MAKE_PROGRAM} ${INSTALL_MAKE_FLAGS} \
                   5154:                 -f ${MAKE_FILE} \
                   5155:                 ${INSTALL_TARGET}
                   5156: .endfor
                   5157: 
                   5158: The variable's meanings are analogous to the ones in the build phase.
                   5159: INSTALL_DIRS defaults to BUILD_DIRS. INSTALL_TARGET is "install" by default,
                   5160: plus "install.man" if USE_IMAKE is defined and NO_INSTALL_MANPAGES is not
                   5161: defined.
                   5162: 
                   5163: In the install phase, the following variables are useful. They are all
                   5164: variations of the install(1) command that have the owner, group and permissions
                   5165: preset. INSTALL is the plain install command. The specialized variants,
                   5166: together with their intended use, are:
                   5167: 
                   5168: INSTALL_PROGRAM_DIR
                   5169: 
                   5170:     directories that contain binaries
                   5171: 
                   5172: INSTALL_SCRIPT_DIR
                   5173: 
                   5174:     directories that contain scripts
                   5175: 
                   5176: INSTALL_LIB_DIR
                   5177: 
                   5178:     directories that contain shared and static libraries
                   5179: 
                   5180: INSTALL_DATA_DIR
                   5181: 
                   5182:     directories that contain data files
                   5183: 
                   5184: INSTALL_MAN_DIR
                   5185: 
                   5186:     directories that contain man pages
                   5187: 
1.100     leot     5188: INSTALL_GAME_DIR
                   5189: 
                   5190:     directories that contain data files for games
                   5191: 
1.1       dsieger  5192: INSTALL_PROGRAM
                   5193: 
                   5194:     binaries that can be stripped from debugging symbols
                   5195: 
                   5196: INSTALL_SCRIPT
                   5197: 
                   5198:     binaries that cannot be stripped
                   5199: 
                   5200: INSTALL_GAME
                   5201: 
                   5202:     game binaries
                   5203: 
                   5204: INSTALL_LIB
                   5205: 
                   5206:     shared and static libraries
                   5207: 
                   5208: INSTALL_DATA
                   5209: 
                   5210:     data files
                   5211: 
                   5212: INSTALL_GAME_DATA
                   5213: 
                   5214:     data files for games
                   5215: 
                   5216: INSTALL_MAN
                   5217: 
                   5218:     man pages
                   5219: 
                   5220: Some other variables are:
                   5221: 
1.106     tnn      5222: INSTALL_UNSTRIPPED
                   5223: 
                   5224:     If set to yes, do not run strip(1) when installing binaries. Any debugging
                   5225:     sections and symbols present in binaries will be preserved.
                   5226: 
1.1       dsieger  5227: INSTALLATION_DIRS
                   5228: 
                   5229:     A list of directories relative to PREFIX that are created by pkgsrc at the
                   5230:     beginning of the install phase. The package is supposed to create all
                   5231:     needed directories itself before installing files to it and list all other
                   5232:     directories here.
                   5233: 
1.25      wiz      5234: In the rare cases that a package shouldn't install anything, set NO_INSTALL to 
1.1       dsieger  5235: "yes". This is mostly relevant for packages in the regress category.
                   5236: 
1.6       rillig   5237: 17.15. The package phase
1.1       dsieger  5238: 
                   5239: Once the install stage has completed, a binary package of the installed files
                   5240: can be built. These binary packages can be used for quick installation without
                   5241: previous compilation, e.g. by the make bin-install or by using pkg_add.
                   5242: 
                   5243: By default, the binary packages are created in ${PACKAGES}/All and symlinks are
                   5244: created in ${PACKAGES}/category, one for each category in the CATEGORIES
                   5245: variable. PACKAGES defaults to pkgsrc/packages.
                   5246: 
1.6       rillig   5247: 17.16. Cleaning up
1.1       dsieger  5248: 
                   5249: Once you're finished with a package, you can clean the work directory by
                   5250: running make clean. If you want to clean the work directories of all
                   5251: dependencies too, use make clean-depends.
                   5252: 
1.6       rillig   5253: 17.17. Other helpful targets
1.1       dsieger  5254: 
                   5255: pre/post-*
                   5256: 
                   5257:     For any of the main targets described in the previous section, two
                   5258:     auxiliary targets exist with "pre-" and "post-" used as a prefix for the
                   5259:     main target's name. These targets are invoked before and after the main
                   5260:     target is called, allowing extra configuration or installation steps be
                   5261:     performed from a package's Makefile, for example, which a program's
                   5262:     configure script or install target omitted.
                   5263: 
                   5264: do-*
                   5265: 
                   5266:     Should one of the main targets do the wrong thing, and should there be no
                   5267:     variable to fix this, you can redefine it with the do-* target. (Note that
                   5268:     redefining the target itself instead of the do-* target is a bad idea, as
                   5269:     the pre-* and post-* targets won't be called anymore, etc.) You will not
                   5270:     usually need to do this.
                   5271: 
                   5272: reinstall
                   5273: 
                   5274:     If you did a make install and you noticed some file was not installed
                   5275:     properly, you can repeat the installation with this target, which will
                   5276:     ignore the "already installed" flag.
                   5277: 
                   5278:     This is the default value of DEPENDS_TARGET except in the case of make
                   5279:     update and make package, where the defaults are "package" and "update",
                   5280:     respectively.
                   5281: 
                   5282: deinstall
                   5283: 
                   5284:     This target does a pkg_delete(1) in the current directory, effectively
                   5285:     de-installing the package. The following variables can be used to tune the
                   5286:     behaviour:
                   5287: 
                   5288:     PKG_VERBOSE
                   5289: 
                   5290:         Add a "-v" to the pkg_delete(1) command.
                   5291: 
                   5292:     DEINSTALLDEPENDS
                   5293: 
                   5294:         Remove all packages that require (depend on) the given package. This
                   5295:         can be used to remove any packages that may have been pulled in by a
                   5296:         given package, e.g. if make deinstall DEINSTALLDEPENDS=1 is done in
1.25      wiz      5297:         pkgsrc/x11/kde, this is likely to remove whole KDE. Works by adding "-R
                   5298:         " to the pkg_delete(1) command line.
1.1       dsieger  5299: 
                   5300: bin-install
                   5301: 
                   5302:     Install a binary package from local disk and via FTP from a list of sites
                   5303:     (see the BINPKG_SITES variable), and do a make package if no binary package
                   5304:     is available anywhere. The arguments given to pkg_add can be set via
                   5305:     BIN_INSTALL_FLAGS e.g., to do verbose operation, etc.
                   5306: 
1.95      wiz      5307: install-clean
                   5308: 
                   5309:     This target removes the state files for the "install" and later phases so
                   5310:     that the "install" target may be re-invoked. This can be used after editing
                   5311:     the PLIST to install the package without rebuilding it.
                   5312: 
                   5313: build-clean
                   5314: 
                   5315:     This target removes the state files for the "build" and later phases so
                   5316:     that the "build" target may be re-invoked.
                   5317: 
1.1       dsieger  5318: update
                   5319: 
                   5320:     This target causes the current package to be updated to the latest version.
                   5321:     The package and all depending packages first get de-installed, then current
                   5322:     versions of the corresponding packages get compiled and installed. This is
                   5323:     similar to manually noting which packages are currently installed, then
                   5324:     performing a series of make deinstall and make install (or whatever
                   5325:     UPDATE_TARGET is set to) for these packages.
                   5326: 
                   5327:     You can use the "update" target to resume package updating in case a
                   5328:     previous make update was interrupted for some reason. However, in this
                   5329:     case, make sure you don't call make clean or otherwise remove the list of
                   5330:     dependent packages in WRKDIR. Otherwise, you lose the ability to
                   5331:     automatically update the current package along with the dependent packages
                   5332:     you have installed.
                   5333: 
                   5334:     Resuming an interrupted make update will only work as long as the package
                   5335:     tree remains unchanged. If the source code for one of the packages to be
                   5336:     updated has been changed, resuming make update will most certainly fail!
                   5337: 
1.4       rillig   5338:     The following variables can be used either on the command line or in
1.1       dsieger  5339:     mk.conf to alter the behaviour of make update:
                   5340: 
                   5341:     UPDATE_TARGET
                   5342: 
                   5343:         Install target to recursively use for the updated package and the
                   5344:         dependent packages. Defaults to DEPENDS_TARGET if set, "install"
1.25      wiz      5345:         otherwise for make update. Other good targets are "package" or "
                   5346:         bin-install". Do not set this to "update" or you will get stuck in an
1.1       dsieger  5347:         endless loop!
                   5348: 
                   5349:     NOCLEAN
                   5350: 
                   5351:         Don't clean up after updating. Useful if you want to leave the work
                   5352:         sources of the updated packages around for inspection or other
1.25      wiz      5353:         purposes. Be sure you eventually clean up the source tree (see the "
                   5354:         clean-update" target below) or you may run into troubles with old
1.1       dsieger  5355:         source code still lying around on your next make or make update.
                   5356: 
                   5357:     REINSTALL
                   5358: 
                   5359:         Deinstall each package before installing (making DEPENDS_TARGET). This
                   5360:         may be necessary if the "clean-update" target (see below) was called
                   5361:         after interrupting a running make update.
                   5362: 
                   5363:     DEPENDS_TARGET
                   5364: 
                   5365:         Allows you to disable recursion and hardcode the target for packages.
                   5366:         The default is "update" for the update target, facilitating a recursive
                   5367:         update of prerequisite packages. Only set DEPENDS_TARGET if you want to
                   5368:         disable recursive updates. Use UPDATE_TARGET instead to just set a
                   5369:         specific target for each package to be installed during make update
                   5370:         (see above).
                   5371: 
                   5372: clean-update
                   5373: 
                   5374:     Clean the source tree for all packages that would get updated if make
                   5375:     update was called from the current directory. This target should not be
                   5376:     used if the current package (or any of its depending packages) have already
                   5377:     been de-installed (e.g., after calling make update) or you may lose some
1.25      wiz      5378:     packages you intended to update. As a rule of thumb: only use this target 
1.1       dsieger  5379:     before the first time you run make update and only if you have a dirty
                   5380:     package tree (e.g., if you used NOCLEAN).
                   5381: 
                   5382:     If you are unsure about whether your tree is clean, you can either perform
                   5383:     a make clean at the top of the tree, or use the following sequence of
                   5384:     commands from the directory of the package you want to update (before
                   5385:     running make update for the first time, otherwise you lose all the packages
                   5386:     you wanted to update!):
                   5387: 
                   5388:     # make clean-update
                   5389:     # make clean CLEANDEPENDS=YES
                   5390:     # make update
                   5391: 
                   5392: 
1.4       rillig   5393:     The following variables can be used either on the command line or in
1.1       dsieger  5394:     mk.conf to alter the behaviour of make clean-update:
                   5395: 
                   5396:     CLEAR_DIRLIST
                   5397: 
                   5398:         After make clean, do not reconstruct the list of directories to update
                   5399:         for this package. Only use this if make update successfully installed
                   5400:         all packages you wanted to update. Normally, this is done automatically
                   5401:         on make update, but may have been suppressed by the NOCLEAN variable
                   5402:         (see above).
                   5403: 
                   5404: replace
                   5405: 
                   5406:     Update the installation of the current package. This differs from update in
                   5407:     that it does not replace dependent packages. You will need to install
                   5408:     pkgtools/pkg_tarup for this target to work.
                   5409: 
                   5410:     Be careful when using this target! There are no guarantees that dependent
                   5411:     packages will still work, in particular they will most certainly break if
                   5412:     you make replace a library package whose shared library major version
                   5413:     changed between your installed version and the new one. For this reason,
                   5414:     this target is not officially supported and only recommended for advanced
                   5415:     users.
                   5416: 
                   5417: info
                   5418: 
                   5419:     This target invokes pkg_info(1) for the current package. You can use this
                   5420:     to check which version of a package is installed.
                   5421: 
                   5422: index
                   5423: 
                   5424:     This is a top-level command, i.e. it should be used in the pkgsrc
                   5425:     directory. It creates a database of all packages in the local pkgsrc tree,
                   5426:     including dependencies, comment, maintainer, and some other useful
                   5427:     information. Individual entries are created by running make describe in the
                   5428:     packages' directories. This index file is saved as pkgsrc/INDEX. It can be
                   5429:     displayed in verbose format by running make print-index. You can search in
                   5430:     it with make search key=something. You can extract a list of all packages
                   5431:     that depend on a particular one by running make show-deps PKG=somepackage.
                   5432: 
                   5433:     Running this command takes a very long time, some hours even on fast
                   5434:     machines!
                   5435: 
                   5436: readme
                   5437: 
                   5438:     This target generates a README.html file, which can be viewed using a
                   5439:     browser such as www/firefox or www/links. The generated files contain
                   5440:     references to any packages which are in the PACKAGES directory on the local
                   5441:     host. The generated files can be made to refer to URLs based on
                   5442:     FTP_PKG_URL_HOST and FTP_PKG_URL_DIR. For example, if I wanted to generate
                   5443:     README.html files which pointed to binary packages on the local machine, in
                   5444:     the directory /usr/packages, set FTP_PKG_URL_HOST=file://localhost and
                   5445:     FTP_PKG_URL_DIR=/usr/packages. The ${PACKAGES} directory and its
                   5446:     subdirectories will be searched for all the binary packages.
                   5447: 
                   5448:     The target can be run at the toplevel or in category directories, in which
                   5449:     case it descends recursively.
                   5450: 
                   5451: readme-all
                   5452: 
                   5453:     This is a top-level command, run it in pkgsrc. Use this target to create a
                   5454:     file README-all.html which contains a list of all packages currently
                   5455:     available in the NetBSD Packages Collection, together with the category
                   5456:     they belong to and a short description. This file is compiled from the
                   5457:     pkgsrc/*/README.html files, so be sure to run this after a make readme.
                   5458: 
                   5459: cdrom-readme
                   5460: 
                   5461:     This is very much the same as the "readme" target (see above), but is to be
                   5462:     used when generating a pkgsrc tree to be written to a CD-ROM. This target
                   5463:     also produces README.html files, and can be made to refer to URLs based on
                   5464:     CDROM_PKG_URL_HOST and CDROM_PKG_URL_DIR.
                   5465: 
                   5466: show-distfiles
                   5467: 
                   5468:     This target shows which distfiles and patchfiles are needed to build the
                   5469:     package (ALLFILES, which contains all DISTFILES and PATCHFILES, but not
                   5470:     patches/*).
                   5471: 
                   5472: show-downlevel
                   5473: 
                   5474:     This target shows nothing if the package is not installed. If a version of
                   5475:     this package is installed, but is not the version provided in this version
                   5476:     of pkgsrc, then a warning message is displayed. This target can be used to
                   5477:     show which of your installed packages are downlevel, and so the old
                   5478:     versions can be deleted, and the current ones added.
                   5479: 
                   5480: show-pkgsrc-dir
                   5481: 
                   5482:     This target shows the directory in the pkgsrc hierarchy from which the
                   5483:     package can be built and installed. This may not be the same directory as
                   5484:     the one from which the package was installed. This target is intended to be
                   5485:     used by people who may wish to upgrade many packages on a single host, and
1.25      wiz      5486:     can be invoked from the top-level pkgsrc Makefile by using the "
                   5487:     show-host-specific-pkgs" target.
1.1       dsieger  5488: 
                   5489: show-installed-depends
                   5490: 
                   5491:     This target shows which installed packages match the current package's
                   5492:     DEPENDS. Useful if out of date dependencies are causing build problems.
                   5493: 
1.95      wiz      5494: print-build-depends-list
                   5495: 
                   5496:     This target shows the list of packages that the current package depends on
                   5497:     for building.
                   5498: 
                   5499: print-run-depends-list
                   5500: 
                   5501:     This target shows the list of packages that the current package depends on
                   5502:     for running.
                   5503: 
1.1       dsieger  5504: check-shlibs
                   5505: 
                   5506:     After a package is installed, check all its binaries and (on ELF platforms)
                   5507:     shared libraries to see if they find the shared libs they need. Run by
1.4       rillig   5508:     default if PKG_DEVELOPER is set in mk.conf.
1.1       dsieger  5509: 
                   5510: print-PLIST
                   5511: 
                   5512:     After a "make install" from a new or upgraded pkg, this prints out an
                   5513:     attempt to generate a new PLIST from a find -newer work/.extract_done. An
                   5514:     attempt is made to care for shared libs etc., but it is strongly
                   5515:     recommended to review the result before putting it into PLIST. On upgrades,
                   5516:     it's useful to diff the output of this command against an already existing
                   5517:     PLIST file.
                   5518: 
                   5519:     If the package installs files via tar(1) or other methods that don't update
                   5520:     file access times, be sure to add these files manually to your PLIST, as
                   5521:     the "find -newer" command used by this target won't catch them!
                   5522: 
1.6       rillig   5523:     See Section 13.3, "Tweaking output of make print-PLIST" for more
1.1       dsieger  5524:     information on this target.
                   5525: 
                   5526: bulk-package
                   5527: 
                   5528:     Used to do bulk builds. If an appropriate binary package already exists, no
                   5529:     action is taken. If not, this target will compile, install and package it
1.66      asau     5530:     (and its depends, if PKG_DEPENDS is set properly. See Chapter 7, Creating
                   5531:     binary packages for everything in pkgsrc (bulk builds)). After creating the
                   5532:     binary package, the sources, the just-installed package and its required
                   5533:     packages are removed, preserving free disk space.
1.1       dsieger  5534: 
                   5535:     Beware that this target may deinstall all packages installed on a system!
                   5536: 
                   5537: bulk-install
                   5538: 
                   5539:     Used during bulk-installs to install required packages. If an up-to-date
1.25      wiz      5540:     binary package is available, it will be installed via pkg_add(1). If not, 
1.1       dsieger  5541:     make bulk-package will be executed, but the installed binary won't be
                   5542:     removed.
                   5543: 
                   5544:     A binary package is considered "up-to-date" to be installed via pkg_add(1)
                   5545:     if:
                   5546: 
1.42      asau     5547:       + None of the package's files (Makefile, ...) were modified since it was
1.1       dsieger  5548:         built.
                   5549: 
1.42      asau     5550:       + None of the package's required (binary) packages were modified since it
1.1       dsieger  5551:         was built.
                   5552: 
                   5553:     Beware that this target may deinstall all packages installed on a system!
                   5554: 
1.6       rillig   5555: Chapter 18. Tools needed for building or running
1.1       dsieger  5556: 
                   5557: Table of Contents
                   5558: 
1.6       rillig   5559: 18.1. Tools for pkgsrc builds
                   5560: 18.2. Tools needed by packages
                   5561: 18.3. Tools provided by platforms
1.1       dsieger  5562: 
                   5563: The USE_TOOLS definition is used both internally by pkgsrc and also for
                   5564: individual packages to define what commands are needed for building a package
                   5565: (like BUILD_DEPENDS) or for later run-time of an installed packaged (such as
                   5566: DEPENDS). If the native system provides an adequate tool, then in many cases, a
                   5567: pkgsrc package will not be used.
                   5568: 
                   5569: When building a package, the replacement tools are made available in a
                   5570: directory (as symlinks or wrapper scripts) that is early in the executable
                   5571: search path. Just like the buildlink system, this helps with consistent builds.
                   5572: 
                   5573: A tool may be needed to help build a specific package. For example, perl, GNU
                   5574: make (gmake) or yacc may be needed.
                   5575: 
                   5576: Also a tool may be needed, for example, because the native system's supplied
                   5577: tool may be inefficient for building a package with pkgsrc. For example, a
                   5578: package may need GNU awk, bison (instead of yacc) or a better sed.
                   5579: 
                   5580: The tools used by a package can be listed by running make show-tools.
                   5581: 
1.6       rillig   5582: 18.1. Tools for pkgsrc builds
1.1       dsieger  5583: 
                   5584: The default set of tools used by pkgsrc is defined in bsd.pkg.mk. This includes
                   5585: standard Unix tools, such as: cat, awk, chmod, test, and so on. These can be
                   5586: seen by running: make show-var VARNAME=USE_TOOLS.
                   5587: 
                   5588: If a package needs a specific program to build then the USE_TOOLS variable can
                   5589: be used to define the tools needed.
                   5590: 
1.6       rillig   5591: 18.2. Tools needed by packages
1.1       dsieger  5592: 
1.29      wiz      5593: In the following examples, the :run means that it is needed at run-time (and
                   5594: becomes a DEPENDS). The default is a build dependency which can be set with
                   5595: :build. (So in this example, it is the same as gmake:build and
                   5596: pkg-config:build.)
1.1       dsieger  5597: 
                   5598: USE_TOOLS+=     gmake perl:run pkg-config
                   5599: 
                   5600: When using the tools framework, a TOOLS_PATH.foo variable is defined which
                   5601: contains the full path to the appropriate tool. For example, TOOLS_PATH.bash
                   5602: could be "/bin/bash" on Linux systems.
                   5603: 
                   5604: If you always need a pkgsrc version of the tool at run-time, then just use
                   5605: DEPENDS instead.
                   5606: 
1.6       rillig   5607: 18.3. Tools provided by platforms
1.1       dsieger  5608: 
                   5609: When improving or porting pkgsrc to a new platform, have a look at (or create)
                   5610: the corresponding platform specific make file fragment under pkgsrc/mk/tools/
                   5611: tools.${OPSYS}.mk which defines the name of the common tools. For example:
                   5612: 
                   5613: .if exists(/usr/bin/bzcat)
                   5614: TOOLS_PLATFORM.bzcat?=          /usr/bin/bzcat
                   5615: .elif exists(/usr/bin/bzip2)
                   5616: TOOLS_PLATFORM.bzcat?=          /usr/bin/bzip2 -cd
                   5617: .endif
                   5618: 
                   5619: TOOLS_PLATFORM.true?=           true                    # shell builtin
                   5620: 
1.6       rillig   5621: Chapter 19. Making your package work
1.1       dsieger  5622: 
                   5623: Table of Contents
                   5624: 
1.6       rillig   5625: 19.1. General operation
1.1       dsieger  5626: 
1.108     rillig   5627:     19.1.1. How to pull in user-settable variables from mk.conf
                   5628:     19.1.2. User interaction
                   5629:     19.1.3. Handling licenses
                   5630:     19.1.4. Restricted packages
                   5631:     19.1.5. Handling dependencies
                   5632:     19.1.6. Handling conflicts with other packages
                   5633:     19.1.7. Packages that cannot or should not be built
                   5634:     19.1.8. Packages which should not be deleted, once installed
                   5635:     19.1.9. Handling packages with security problems
                   5636:     19.1.10. How to handle incrementing versions when fixing an existing
1.1       dsieger  5637:         package
1.108     rillig   5638:     19.1.11. Substituting variable text in the package files (the SUBST
1.1       dsieger  5639:         framework)
                   5640: 
1.108     rillig   5641: 19.2. The fetch phase
1.1       dsieger  5642: 
1.6       rillig   5643:     19.2.1. Packages whose distfiles aren't available for plain downloading
                   5644:     19.2.2. How to handle modified distfiles with the 'old' name
1.88      tnn      5645:     19.2.3. Packages hosted on github.com
1.1       dsieger  5646: 
1.108     rillig   5647: 19.3. The configure phase
1.1       dsieger  5648: 
1.6       rillig   5649:     19.3.1. Shared libraries - libtool
                   5650:     19.3.2. Using libtool on GNU packages that already support libtool
                   5651:     19.3.3. GNU Autoconf/Automake
                   5652: 
                   5653: 19.4. Programming languages
                   5654: 
                   5655:     19.4.1. C, C++, and Fortran
                   5656:     19.4.2. Java
                   5657:     19.4.3. Packages containing perl scripts
1.41      wiz      5658:     19.4.4. Packages containing shell scripts
                   5659:     19.4.5. Other programming languages
1.6       rillig   5660: 
1.108     rillig   5661: 19.5. The build phase
1.6       rillig   5662: 
                   5663:     19.5.1. Compiling C and C++ code conditionally
                   5664:     19.5.2. How to handle compiler bugs
1.24      wiz      5665:     19.5.3. Undefined reference to "..."
1.6       rillig   5666:     19.5.4. Running out of memory
                   5667: 
1.108     rillig   5668: 19.6. The install phase
1.6       rillig   5669: 
                   5670:     19.6.1. Creating needed directories
                   5671:     19.6.2. Where to install documentation
                   5672:     19.6.3. Installing highscore files
                   5673:     19.6.4. Adding DESTDIR support to packages
                   5674:     19.6.5. Packages with hardcoded paths to other interpreters
                   5675:     19.6.6. Packages installing perl modules
                   5676:     19.6.7. Packages installing info files
                   5677:     19.6.8. Packages installing man pages
1.7       rillig   5678:     19.6.9. Packages installing GConf data files
1.18      mishka   5679:     19.6.10. Packages installing scrollkeeper/rarian data files
1.6       rillig   5680:     19.6.11. Packages installing X11 fonts
                   5681:     19.6.12. Packages installing GTK2 modules
                   5682:     19.6.13. Packages installing SGML or XML data
                   5683:     19.6.14. Packages installing extensions to the MIME database
                   5684:     19.6.15. Packages using intltool
                   5685:     19.6.16. Packages installing startup scripts
                   5686:     19.6.17. Packages installing TeX modules
                   5687:     19.6.18. Packages supporting running binaries in emulation
                   5688:     19.6.19. Packages installing hicolor theme icons
                   5689:     19.6.20. Packages installing desktop files
1.1       dsieger  5690: 
1.6       rillig   5691: 19.7. Marking packages as having problems
1.1       dsieger  5692: 
1.6       rillig   5693: 19.1. General operation
1.1       dsieger  5694: 
                   5695: One appealing feature of pkgsrc is that it runs on many different platforms. As
                   5696: a result, it is important to ensure, where possible, that packages in pkgsrc
                   5697: are portable. This chapter mentions some particular details you should pay
                   5698: attention to while working on pkgsrc.
                   5699: 
1.108     rillig   5700: 19.1.1. How to pull in user-settable variables from mk.conf
1.1       dsieger  5701: 
                   5702: The pkgsrc user can configure pkgsrc by overriding several variables in the
1.4       rillig   5703: file pointed to by MAKECONF, which is mk.conf by default. When you want to use
                   5704: those variables in the preprocessor directives of make(1) (for example .if or
                   5705: .for), you need to include the file ../../mk/bsd.prefs.mk before, which in turn
                   5706: loads the user preferences.
1.1       dsieger  5707: 
                   5708: But note that some variables may not be completely defined after ../../mk/
                   5709: bsd.prefs.mk has been included, as they may contain references to variables
1.108     rillig   5710: that are not yet defined. In shell commands (the lines in Makefile that are
                   5711: indented with a tab) this is no problem, since variables are only expanded when
                   5712: they are used. But in the preprocessor directives mentioned above and in
                   5713: dependency lines (of the form target: dependencies) the variables are expanded
                   5714: at load time.
1.1       dsieger  5715: 
                   5716: Note
                   5717: 
1.108     rillig   5718: To check whether a variable can be used at load time, run pkglint -Wall on your
                   5719: package.
1.1       dsieger  5720: 
1.108     rillig   5721: 19.1.2. User interaction
1.1       dsieger  5722: 
                   5723: Occasionally, packages require interaction from the user, and this can be in a
                   5724: number of ways:
                   5725: 
                   5726:   * When fetching the distfiles, some packages require user interaction such as
                   5727:     entering username/password or accepting a license on a web page.
                   5728: 
                   5729:   * When extracting the distfiles, some packages may ask for passwords.
                   5730: 
                   5731:   * help to configure the package before it is built
                   5732: 
                   5733:   * help during the build process
                   5734: 
                   5735:   * help during the installation of a package
                   5736: 
1.108     rillig   5737: A package can set the INTERACTIVE_STAGE variable to define which stages need
                   5738: interaction. This should be done in the package's Makefile, e.g.:
1.1       dsieger  5739: 
                   5740: INTERACTIVE_STAGE=      configure install
                   5741: 
                   5742: The user can then decide to skip this package by setting the BATCH variable.
1.108     rillig   5743: Packages that require interaction are also excluded from bulk builds.
1.1       dsieger  5744: 
1.108     rillig   5745: 19.1.3. Handling licenses
1.1       dsieger  5746: 
                   5747: Authors of software can choose the licence under which software can be copied.
1.111     sevan    5748: The Free Software Foundation has declared some licenses "Free", and the Open
                   5749: Source Initiative has a definition of "Open Source".
                   5750: 
                   5751: By default, pkgsrc allows packages with Free or Open Source licenses to be
                   5752: built. To allow packages with other licenses to be built as well, the pkgsrc
                   5753: user needs to add these licenses to the ACCEPTABLE_LICENSES variable in mk.conf
                   5754: . Note that this variable only affects which packages may be built, while the
                   5755: license terms often also restrict the actual use of the package and its
                   5756: redistribution.
1.1       dsieger  5757: 
                   5758: One might want to only install packages with a BSD license, or the GPL, and not
1.20      jnemeth  5759: the other. The free licenses are added to the default ACCEPTABLE_LICENSES
1.111     sevan    5760: variable. The pkgsrc user can override the default by setting the
                   5761: ACCEPTABLE_LICENSES variable with "=" instead of "+=". The licenses accepted by
                   5762: default are defined in the DEFAULT_ACCEPTABLE_LICENSES variable in the file
                   5763: pkgsrc/mk/license.mk.
1.1       dsieger  5764: 
                   5765: The license tag mechanism is intended to address copyright-related issues
                   5766: surrounding building, installing and using a package, and not to address
1.20      jnemeth  5767: redistribution issues (see RESTRICTED and NO_SRC_ON_FTP, etc.). Packages with
                   5768: redistribution restrictions should set these tags.
1.1       dsieger  5769: 
                   5770: Denoting that a package may be copied according to a particular license is done
                   5771: by placing the license in pkgsrc/licenses and setting the LICENSE variable to a
                   5772: string identifying the license, e.g. in graphics/xv:
                   5773: 
                   5774: LICENSE=        xv-license
                   5775: 
                   5776: When trying to build, the user will get a notice that the package is covered by
                   5777: a license which has not been placed in the ACCEPTABLE_LICENSES variable:
                   5778: 
                   5779: % make
                   5780: ===> xv-3.10anb9 has an unacceptable license: xv-license.
                   5781: ===>     To view the license, enter "/usr/bin/make show-license".
                   5782: ===>     To indicate acceptance, add this line to your /etc/mk.conf:
                   5783: ===>     ACCEPTABLE_LICENSES+=xv-license
                   5784: *** Error code 1
                   5785: 
                   5786: The license can be viewed with make show-license, and if the user so chooses,
1.4       rillig   5787: the line printed above can be added to mk.conf to convey to pkgsrc that it
1.1       dsieger  5788: should not in the future fail because of that license:
                   5789: 
                   5790: ACCEPTABLE_LICENSES+=xv-license
                   5791: 
1.111     sevan    5792: The use of LICENSE=shareware, LICENSE=no-commercial-use, and similar language
                   5793: is deprecated because it does not crisply refer to a particular license text.
                   5794: Another problem with such usage is that it does not enable a user to tell
                   5795: pkgsrc to proceed for a single package without also telling pkgsrc to proceed
                   5796: for all packages with that tag.
                   5797: 
                   5798: 19.1.3.1. Adding a package with a new license
1.1       dsieger  5799: 
1.49      rodent   5800: When adding a package with a new license, the following steps are required:
                   5801: 
1.111     sevan    5802:  1. Check whether the license qualifies as Free or Open Source by referencing
                   5803:     Various Licenses and Comments about Them and Licenses by Name | Open Source
                   5804:     Initiative. If this is the case, the filename in pkgsrc/licenses/ does not
                   5805:     need the -license suffix, and the license name should be added to:
1.49      rodent   5806: 
                   5807:       + DEFAULT_ACCEPTABLE_LICENSES in pkgsrc/mk/license.mk
                   5808: 
                   5809:       + default_acceptable_licenses in pkgsrc/pkgtools/pkg_install/files/lib/
                   5810:         license.c
                   5811: 
                   5812:  2. The license text should be added to pkgsrc/licenses for displaying. A list
                   5813:     of known licenses can be seen in this directory.
1.1       dsieger  5814: 
1.111     sevan    5815: 19.1.3.2. Change to the license
1.1       dsieger  5816: 
1.111     sevan    5817: When the license changes (in a way other than formatting), make sure that the
                   5818: new license has a different name (e.g., append the version number if it exists,
                   5819: or the date). Just because a user told pkgsrc to build programs under a
                   5820: previous version of a license does not mean that pkgsrc should build programs
                   5821: under the new licenses. The higher-level point is that pkgsrc does not evaluate
                   5822: licenses for reasonableness; the only test is a mechanistic test of whether a
                   5823: particular text has been approved by either of two bodies (FSF or OSI).
1.1       dsieger  5824: 
1.108     rillig   5825: 19.1.4. Restricted packages
1.1       dsieger  5826: 
1.111     sevan    5827: Some licenses restrict how software may be re-distributed. By declaring the
                   5828: restrictions, package tools can automatically refrain from e.g. placing binary
                   5829: packages on FTP sites.
                   5830: 
                   5831: There are four possible restrictions, which are the cross product of sources
                   5832: (distfiles) and binaries not being placed on FTP sites and CD-ROMs. Because
                   5833: this is rarely the exact language in any license, and because non-Free licenses
                   5834: tend to be different from each other, pkgsrc adopts a definition of FTP and
                   5835: CD-ROM. "FTP" means making the source or binary file available over the
                   5836: Internet at no charge. "CD-ROM" means making the source or binary available on
                   5837: some kind of media, together with other source and binary packages, which is
                   5838: sold for a distribution charge.
1.1       dsieger  5839: 
                   5840: In order to encode these restrictions, the package system defines five make
                   5841: variables that can be set to note these restrictions:
                   5842: 
                   5843:   * RESTRICTED
                   5844: 
                   5845:     This variable should be set whenever a restriction exists (regardless of
                   5846:     its kind). Set this variable to a string containing the reason for the
                   5847:     restriction. It should be understood that those wanting to understand the
                   5848:     restriction will have to read the license, and perhaps seek advice of
                   5849:     counsel.
                   5850: 
                   5851:   * NO_BIN_ON_CDROM
                   5852: 
                   5853:     Binaries may not be placed on CD-ROM containing other binary packages, for
                   5854:     which a distribution charge may be made. In this case, set this variable to
                   5855:     ${RESTRICTED}.
                   5856: 
                   5857:   * NO_BIN_ON_FTP
                   5858: 
                   5859:     Binaries may not made available on the Internet without charge. In this
                   5860:     case, set this variable to ${RESTRICTED}. If this variable is set, binary
                   5861:     packages will not be included on ftp.NetBSD.org.
                   5862: 
                   5863:   * NO_SRC_ON_CDROM
                   5864: 
                   5865:     Distfiles may not be placed on CD-ROM, together with other distfiles, for
                   5866:     which a fee may be charged. In this case, set this variable to $
                   5867:     {RESTRICTED}.
                   5868: 
                   5869:   * NO_SRC_ON_FTP
                   5870: 
                   5871:     Distfiles may not made available via FTP at no charge. In this case, set
                   5872:     this variable to ${RESTRICTED}. If this variable is set, the distfile(s)
                   5873:     will not be mirrored on ftp.NetBSD.org.
                   5874: 
1.111     sevan    5875: Please note that packages will be removed from pkgsrc when the distfiles are
1.33      wiz      5876: not distributable and cannot be obtained for a period of one full quarter
1.111     sevan    5877: branch. Packages with manual/interactive fetch must have a maintainer and it is
                   5878: his/her responsibility to ensure this.
1.33      wiz      5879: 
1.108     rillig   5880: 19.1.5. Handling dependencies
1.1       dsieger  5881: 
                   5882: Your package may depend on some other package being present - and there are
                   5883: various ways of expressing this dependency. pkgsrc supports the BUILD_DEPENDS
                   5884: and DEPENDS definitions, the USE_TOOLS definition, as well as dependencies via
                   5885: buildlink3.mk, which is the preferred way to handle dependencies, and which
1.6       rillig   5886: uses the variables named above. See Chapter 14, Buildlink methodology for more
1.1       dsieger  5887: information.
                   5888: 
                   5889: The basic difference between the two variables is as follows: The DEPENDS
                   5890: definition registers that pre-requisite in the binary package so it will be
                   5891: pulled in when the binary package is later installed, whilst the BUILD_DEPENDS
                   5892: definition does not, marking a dependency that is only needed for building the
                   5893: package.
                   5894: 
                   5895: This means that if you only need a package present whilst you are building, it
                   5896: should be noted as a BUILD_DEPENDS.
                   5897: 
                   5898: The format for a BUILD_DEPENDS and a DEPENDS definition is:
                   5899: 
                   5900: <pre-req-package-name>:../../<category>/<pre-req-package>
                   5901: 
                   5902: Please note that the "pre-req-package-name" may include any of the wildcard
                   5903: version numbers recognized by pkg_info(1).
                   5904: 
1.55      wiz      5905:  1. If your package needs another package's binaries or libraries to build and
1.1       dsieger  5906:     run, and if that package has a buildlink3.mk file available, use it:
                   5907: 
                   5908:     .include "../../graphics/jpeg/buildlink3.mk"
                   5909: 
1.55      wiz      5910:  2. If your package needs another package's binaries or libraries only for
                   5911:     building, and if that package has a buildlink3.mk file available, use it:
                   5912: 
                   5913:     .include "../../graphics/jpeg/buildlink3.mk"
                   5914: 
                   5915:     but set BUILDLINK_DEPMETHOD.jpeg?=build to make it a build dependency only.
                   5916:     This case is rather rare.
                   5917: 
                   5918:  3. If your package needs binaries from another package to build, use the
1.26      spz      5919:     BUILD_DEPENDS definition:
1.1       dsieger  5920: 
1.26      spz      5921:     BUILD_DEPENDS+= scons-[0-9]*:../../devel/scons
1.1       dsieger  5922: 
1.55      wiz      5923:  4. If your package needs a library with which to link and there is no
1.26      spz      5924:     buildlink3.mk file available, create one. Using DEPENDS won't be sufficient
                   5925:     because the include files and libraries will be hidden from the compiler.
1.1       dsieger  5926: 
1.55      wiz      5927:  5. If your package needs some executable to be able to run correctly and if
1.26      spz      5928:     there's no buildlink3.mk file, this is specified using the DEPENDS
                   5929:     variable. The print/lyx package needs to be able to execute the latex
                   5930:     binary from the teTeX package when it runs, and that is specified:
1.1       dsieger  5931: 
1.26      spz      5932:     DEPENDS+=        teTeX-[0-9]*:../../print/teTeX
1.1       dsieger  5933: 
1.55      wiz      5934:  6. You can use wildcards in package dependencies. Note that such wildcard
1.26      spz      5935:     dependencies are retained when creating binary packages. The dependency is
                   5936:     checked when installing the binary package and any package which matches
                   5937:     the pattern will be used. Wildcard dependencies should be used with care.
1.1       dsieger  5938: 
                   5939:     The "-[0-9]*" should be used instead of "-*" to avoid potentially ambiguous
                   5940:     matches such as "tk-postgresql" matching a "tk-*" DEPENDS.
                   5941: 
                   5942:     Wildcards can also be used to specify that a package will only build
                   5943:     against a certain minimum version of a pre-requisite:
                   5944: 
1.26      spz      5945:     DEPENDS+=       ImageMagick>=6.0:../../graphics/ImageMagick
1.1       dsieger  5946: 
1.26      spz      5947:     This means that the package will build using version 6.0 of ImageMagick or
                   5948:     newer. Such a dependency may be warranted if, for example, the command line
                   5949:     options of an executable have changed.
                   5950: 
                   5951:     If you need to depend on minimum versions of libraries, see the buildlink
                   5952:     section of the pkgsrc guide.
1.1       dsieger  5953: 
                   5954:     For security fixes, please update the package vulnerabilities file. See
1.108     rillig   5955:     Section 19.1.9, "Handling packages with security problems" for more
1.1       dsieger  5956:     information.
                   5957: 
                   5958: If your package needs files from another package to build, add the relevant
                   5959: distribution files to DISTFILES, so they will be extracted automatically. See
                   5960: the print/ghostscript package for an example. (It relies on the jpeg sources
                   5961: being present in source form during the build.)
                   5962: 
1.108     rillig   5963: 19.1.6. Handling conflicts with other packages
1.1       dsieger  5964: 
                   5965: Your package may conflict with other packages a user might already have
                   5966: installed on his system, e.g. if your package installs the same set of files as
1.80      wiz      5967: another package in the pkgsrc tree or has the same PKGNAME.
1.1       dsieger  5968: 
1.80      wiz      5969: These cases are handled automatically by the packaging tools at package
                   5970: installation time and do not need to be handled manually.
1.1       dsieger  5971: 
1.80      wiz      5972: In case the conflicts can not be recognized automatically (e.g., packages using
                   5973: the same config file location but no other shared files), you can set CONFLICTS
                   5974: to a space-separated list of packages (including version string) your package
                   5975: conflicts with.
1.1       dsieger  5976: 
1.80      wiz      5977: For example, if both foo/bar and foo/baz use the same config file, you would
                   5978: set in foo/bar/Makefile:
1.1       dsieger  5979: 
1.80      wiz      5980: CONFLICTS=      baz-[0-9]*
1.1       dsieger  5981: 
1.80      wiz      5982: and in pkgsrc/foo/baz/Makefile:
1.1       dsieger  5983: 
1.80      wiz      5984: CONFLICTS=      bar-[0-9]*
1.1       dsieger  5985: 
1.108     rillig   5986: 19.1.7. Packages that cannot or should not be built
1.1       dsieger  5987: 
                   5988: There are several reasons why a package might be instructed to not build under
                   5989: certain circumstances. If the package builds and runs on most platforms, the
1.83      dholland 5990: exceptions should be noted with BROKEN_ON_PLATFORM. If the package builds and
                   5991: runs on a small handful of platforms, set BROKEN_EXCEPT_ON_PLATFORM instead.
                   5992: Both BROKEN_ON_PLATFORM and BROKEN_EXCEPT_ON_PLATFORM are OS triples
                   5993: (OS-version-platform) that can use glob-style wildcards.
                   5994: 
1.114     maya     5995: If a package is not appropriate for some platforms (as opposed to merely
1.83      dholland 5996: broken), a different set of variables should be used as this affects failure
                   5997: reporting and statistics. If the package is appropriate for most platforms, the
                   5998: exceptions should be noted with NOT_FOR_PLATFORM. If the package is appropriate
                   5999: for only a small handful of platforms (often exactly one), set
                   6000: ONLY_FOR_PLATFORM instead. Both ONLY_FOR_PLATFORM and NOT_FOR_PLATFORM are OS
                   6001: triples (OS-version-platform) that can use glob-style wildcards.
1.1       dsieger  6002: 
                   6003: Some packages are tightly bound to a specific version of an operating system,
                   6004: e.g. LKMs or sysutils/lsof. Such binary packages are not backwards compatible
                   6005: with other versions of the OS, and should be uploaded to a version specific
                   6006: directory on the FTP server. Mark these packages by setting OSVERSION_SPECIFIC
                   6007: to "yes". This variable is not currently used by any of the package system
                   6008: internals, but may be used in the future.
                   6009: 
                   6010: If the package should be skipped (for example, because it provides
                   6011: functionality already provided by the system), set PKG_SKIP_REASON to a
                   6012: descriptive message. If the package should fail because some preconditions are
                   6013: not met, set PKG_FAIL_REASON to a descriptive message.
                   6014: 
1.108     rillig   6015: 19.1.8. Packages which should not be deleted, once installed
1.1       dsieger  6016: 
                   6017: To ensure that a package may not be deleted, once it has been installed, the
                   6018: PKG_PRESERVE definition should be set in the package Makefile. This will be
1.25      wiz      6019: carried into any binary package that is made from this pkgsrc entry. A "
                   6020: preserved" package will not be deleted using pkg_delete(1) unless the "-f"
1.1       dsieger  6021: option is used.
                   6022: 
1.108     rillig   6023: 19.1.9. Handling packages with security problems
1.1       dsieger  6024: 
                   6025: When a vulnerability is found, this should be noted in localsrc/security/
1.32      wiz      6026: advisories/pkg-vulnerabilities, and after committing that file, ask
                   6027: pkgsrc-security@NetBSD.org to update the file on ftp.NetBSD.org.
1.1       dsieger  6028: 
                   6029: After fixing the vulnerability by a patch, its PKGREVISION should be increased
                   6030: (this is of course not necessary if the problem is fixed by using a newer
1.32      wiz      6031: release of the software), and the pattern in the pkg-vulnerabilities file must
                   6032: be updated.
1.1       dsieger  6033: 
                   6034: Also, if the fix should be applied to the stable pkgsrc branch, be sure to
                   6035: submit a pullup request!
                   6036: 
                   6037: Binary packages already on ftp.NetBSD.org will be handled semi-automatically by
                   6038: a weekly cron job.
                   6039: 
1.108     rillig   6040: 19.1.10. How to handle incrementing versions when fixing an existing package
1.1       dsieger  6041: 
                   6042: When making fixes to an existing package it can be useful to change the version
                   6043: number in PKGNAME. To avoid conflicting with future versions by the original
                   6044: author, a "nb1", "nb2", ... suffix can be used on package versions by setting
                   6045: PKGREVISION=1 (2, ...). The "nb" is treated like a "." by the package tools.
                   6046: e.g.
                   6047: 
                   6048: DISTNAME=       foo-17.42
                   6049: PKGREVISION=    9
                   6050: 
                   6051: will result in a PKGNAME of "foo-17.42nb9". If you want to use the original
                   6052: value of PKGNAME without the "nbX" suffix, e.g. for setting DIST_SUBDIR, use
                   6053: PKGNAME_NOREV.
                   6054: 
                   6055: When a new release of the package is released, the PKGREVISION should be
                   6056: removed, e.g. on a new minor release of the above package, things should be
                   6057: like:
                   6058: 
                   6059: DISTNAME=       foo-17.43
                   6060: 
                   6061: PKGREVISION should be incremented for any non-trivial change in the resulting
                   6062: binary package. Without a PKGREVISION bump, someone with the previous version
                   6063: installed has no way of knowing that their package is out of date. Thus,
                   6064: changes without increasing PKGREVISION are essentially labeled "this is so
                   6065: trivial that no reasonable person would want to upgrade", and this is the rough
                   6066: test for when increasing PKGREVISION is appropriate. Examples of changes that
                   6067: do not merit increasing PKGREVISION are:
                   6068: 
1.14      jmcneill 6069:   * Changing HOMEPAGE, MAINTAINER, OWNER, or comments in Makefile.
1.1       dsieger  6070: 
                   6071:   * Changing build variables if the resulting binary package is the same.
                   6072: 
                   6073:   * Changing DESCR.
                   6074: 
                   6075:   * Adding PKG_OPTIONS if the default options don't change.
                   6076: 
                   6077: Examples of changes that do merit an increase to PKGREVISION include:
                   6078: 
                   6079:   * Security fixes
                   6080: 
                   6081:   * Changes or additions to a patch file
                   6082: 
                   6083:   * Changes to the PLIST
                   6084: 
1.12      weinem   6085:   * A dependency is changed or renamed.
                   6086: 
1.1       dsieger  6087: PKGREVISION must also be incremented when dependencies have ABI changes.
                   6088: 
1.108     rillig   6089: 19.1.11. Substituting variable text in the package files (the SUBST framework)
1.1       dsieger  6090: 
                   6091: When you want to replace the same text in multiple files or when the
                   6092: replacement text varies, patches alone cannot help. This is where the SUBST
                   6093: framework comes in. It provides an easy-to-use interface for replacing text in
                   6094: files. Example:
                   6095: 
                   6096: SUBST_CLASSES+=                 fix-paths
                   6097: SUBST_STAGE.fix-paths=          pre-configure
                   6098: SUBST_MESSAGE.fix-paths=        Fixing absolute paths.
                   6099: SUBST_FILES.fix-paths=          src/*.c
                   6100: SUBST_FILES.fix-paths+=         scripts/*.sh
                   6101: SUBST_SED.fix-paths=            -e 's,"/usr/local,"${PREFIX},g'
                   6102: SUBST_SED.fix-paths+=           -e 's,"/var/log,"${VARBASE}/log,g'
                   6103: 
                   6104: SUBST_CLASSES is a list of identifiers that are used to identify the different
                   6105: SUBST blocks that are defined. The SUBST framework is heavily used by pkgsrc,
                   6106: so it is important to always use the += operator with this variable. Otherwise
                   6107: some substitutions may be skipped.
                   6108: 
                   6109: The remaining variables of each SUBST block are parameterized with the
                   6110: identifier from the first line (fix-paths in this case.) They can be seen as
                   6111: parameters to a function call.
                   6112: 
                   6113: SUBST_STAGE.* specifies the stage at which the replacement will take place. All
                   6114: combinations of pre-, do- and post- together with a phase name are possible,
                   6115: though only few are actually used. Most commonly used are post-patch and
                   6116: pre-configure. Of these two, pre-configure should be preferred because then it
                   6117: is possible to run bmake patch and have the state after applying the patches
                   6118: but before making any other changes. This is especially useful when you are
                   6119: debugging a package in order to create new patches for it. Similarly,
                   6120: post-build is preferred over pre-install, because the install phase should
                   6121: generally be kept as simple as possible. When you use post-build, you have the
                   6122: same files in the working directory that will be installed later, so you can
                   6123: check if the substitution has succeeded.
                   6124: 
                   6125: SUBST_MESSAGE.* is an optional text that is printed just before the
                   6126: substitution is done.
                   6127: 
                   6128: SUBST_FILES.* is the list of shell globbing patterns that specifies the files
                   6129: in which the substitution will take place. The patterns are interpreted
                   6130: relatively to the WRKSRC directory.
                   6131: 
                   6132: SUBST_SED.* is a list of arguments to sed(1) that specify the actual
                   6133: substitution. Every sed command should be prefixed with -e, so that all SUBST
                   6134: blocks look uniform.
                   6135: 
                   6136: There are some more variables, but they are so seldomly used that they are only
                   6137: documented in the mk/subst.mk file.
                   6138: 
1.108     rillig   6139: 19.2. The fetch phase
1.1       dsieger  6140: 
1.6       rillig   6141: 19.2.1. Packages whose distfiles aren't available for plain downloading
1.1       dsieger  6142: 
                   6143: If you need to download from a dynamic URL you can set DYNAMIC_MASTER_SITES and
                   6144: a make fetch will call files/getsite.sh with the name of each file to download
                   6145: as an argument, expecting it to output the URL of the directory from which to
                   6146: download it. graphics/ns-cult3d is an example of this usage.
                   6147: 
                   6148: If the download can't be automated, because the user must submit personal
                   6149: information to apply for a password, or must pay for the source, or whatever,
                   6150: you can set FETCH_MESSAGE to a list of lines that are displayed to the user
                   6151: before aborting the build. Example:
                   6152: 
                   6153: FETCH_MESSAGE=  "Please download the files"
                   6154: FETCH_MESSAGE+= "    "${DISTFILES:Q}
                   6155: FETCH_MESSAGE+= "manually from "${MASTER_SITES:Q}"."
                   6156: 
1.6       rillig   6157: 19.2.2. How to handle modified distfiles with the 'old' name
1.1       dsieger  6158: 
                   6159: Sometimes authors of a software package make some modifications after the
                   6160: software was released, and they put up a new distfile without changing the
                   6161: package's version number. If a package is already in pkgsrc at that time, the
                   6162: checksum will no longer match. The contents of the new distfile should be
                   6163: compared against the old one before changing anything, to make sure the
                   6164: distfile was really updated on purpose, and that no trojan horse or so crept
                   6165: in. Please mention that the distfiles were compared and what was found in your
1.54      rodent   6166: commit message.
                   6167: 
                   6168: Then, the correct way to work around this is to set DIST_SUBDIR to a unique
1.109     wiz      6169: directory name, usually based on PKGNAME_NOREV (but take care with python or
                   6170: ruby packages, where PKGNAME includes a variable prefix). All DISTFILES and
                   6171: PATCHFILES for this package will be put in that subdirectory of the local
                   6172: distfiles directory. (See Section 19.1.10, "How to handle incrementing versions
                   6173: when fixing an existing package" for more details.) In case this happens more
                   6174: often, PKGNAME can be used (thus including the nbX suffix) or a date stamp can
                   6175: be appended, like ${PKGNAME_NOREV}-YYYYMMDD.
1.54      rodent   6176: 
                   6177: DIST_SUBDIR is also used when a distfile's name does not contain a version and
                   6178: the distfile is apt to change. In cases where the likelihood of this is very
                   6179: small, DIST_SUBDIR might not be required. Additionally, DIST_SUBDIR must not be
                   6180: removed unless the distfile name changes, even if a package is being moved or
                   6181: renamed.
                   6182: 
                   6183: Do not forget regenerating the distinfo file after that, since it contains the
                   6184: DIST_SUBDIR path in the filenames. Also, increase the PKGREVISION if the
                   6185: installed package is different. Furthermore, a mail to the package's authors
                   6186: seems appropriate telling them that changing distfiles after releases without
                   6187: changing the file names is not good practice.
1.1       dsieger  6188: 
1.88      tnn      6189: 19.2.3. Packages hosted on github.com
                   6190: 
1.90      tnn      6191: Helper methods exist for packages hosted on github.com which will often have
                   6192: distfile names that clash with other packages, for example 1.0.tar.gz. Use one
                   6193: of the three recipes from below:
1.88      tnn      6194: 
                   6195: 19.2.3.1. Fetch based on a tagged release
                   6196: 
                   6197: If your distfile URL looks similar to http://github.com/username/exampleproject
                   6198: /archive/v1.0.zip, then you are packaging a tagged release.
                   6199: 
                   6200: DISTNAME=       exampleproject-1.0
1.90      tnn      6201: MASTER_SITES=   ${MASTER_SITE_GITHUB:=username/}
                   6202: #GITHUB_PROJECT=        # can be omitted if same as DISTNAME
                   6203: GITHUB_TAG=     v${PKGVERSION_NOREV}
1.88      tnn      6204: EXTRACT_SUFX=   .zip
                   6205: 
                   6206: 19.2.3.2. Fetch based on a specific commit
                   6207: 
                   6208: If your distfile URL looks similar to http://github.com/example/example/archive
                   6209: /988881adc9fc3655077dc2d4d757d480b5ea0e11.tar.gz, then you are packaging a
                   6210: specific commit not tied to a release.
                   6211: 
                   6212: DISTNAME=       example-1.0
1.107     jnemeth  6213: MASTER_SITES=   ${MASTER_SITE_GITHUB:=example/}
1.90      tnn      6214: #GITHUB_PROJECT=        # can be omitted if same as DISTNAME
                   6215: GITHUB_TAG=     988881adc9fc3655077dc2d4d757d480b5ea0e11
1.88      tnn      6216: 
                   6217: 19.2.3.3. Fetch based on release
                   6218: 
                   6219: If your distfile URL looks similar to http://github.com/username/exampleproject
                   6220: /releases/download/rel-1.6/offensive-1.6.zip, then you are packaging a release.
                   6221: 
1.90      tnn      6222: DISTNAME=       offensive-1.6
1.88      tnn      6223: PKGNAME=        ${DISTNAME:S/offensive/proper/}
1.90      tnn      6224: MASTER_SITES=   ${MASTER_SITE_GITHUB:=username/}
                   6225: GITHUB_PROJECT= exampleproject
                   6226: GITHUB_RELEASE= rel-${PKGVERSION_NOREV} # usually just set this to ${DISTNAME}
                   6227: EXTRACT_SUFX=   .zip
1.88      tnn      6228: 
1.108     rillig   6229: 19.3. The configure phase
1.1       dsieger  6230: 
1.6       rillig   6231: 19.3.1. Shared libraries - libtool
1.1       dsieger  6232: 
                   6233: pkgsrc supports many different machines, with different object formats like
                   6234: a.out and ELF, and varying abilities to do shared library and dynamic loading
                   6235: at all. To accompany this, varying commands and options have to be passed to
                   6236: the compiler, linker, etc. to get the Right Thing, which can be pretty annoying
                   6237: especially if you don't have all the machines at your hand to test things. The
                   6238: devel/libtool pkg can help here, as it just "knows" how to build both static
                   6239: and dynamic libraries from a set of source files, thus being
                   6240: platform-independent.
                   6241: 
                   6242: Here's how to use libtool in a package in seven simple steps:
                   6243: 
                   6244:  1. Add USE_LIBTOOL=yes to the package Makefile.
                   6245: 
                   6246:  2. For library objects, use "${LIBTOOL} --mode=compile ${CC}" in place of "$
                   6247:     {CC}". You could even add it to the definition of CC, if only libraries are
                   6248:     being built in a given Makefile. This one command will build both PIC and
                   6249:     non-PIC library objects, so you need not have separate shared and
                   6250:     non-shared library rules.
                   6251: 
                   6252:  3. For the linking of the library, remove any "ar", "ranlib", and "ld
                   6253:     -Bshareable" commands, and instead use:
                   6254: 
                   6255:     ${LIBTOOL} --mode=link \
                   6256:         ${CC} -o ${.TARGET:.a=.la} \
                   6257:             ${OBJS:.o=.lo} \
                   6258:             -rpath ${PREFIX}/lib \
                   6259:             -version-info major:minor
                   6260: 
                   6261:     Note that the library is changed to have a .la extension, and the objects
                   6262:     are changed to have a .lo extension. Change OBJS as necessary. This
                   6263:     automatically creates all of the .a, .so.major.minor, and ELF symlinks (if
                   6264:     necessary) in the build directory. Be sure to include "-version-info",
                   6265:     especially when major and minor are zero, as libtool will otherwise strip
                   6266:     off the shared library version.
                   6267: 
                   6268:     From the libtool manual:
                   6269: 
                   6270:     So, libtool library versions are described by three integers:
                   6271: 
                   6272:     CURRENT
                   6273:     The most recent interface number that this library implements.
                   6274: 
                   6275:     REVISION
                   6276:     The implementation number of the CURRENT interface.
                   6277: 
                   6278:     AGE
                   6279:     The difference between the newest and oldest interfaces that
                   6280:     this library implements.  In other words, the library implements
                   6281:     all the interface numbers in the range from number `CURRENT -
                   6282:     AGE' to `CURRENT'.
                   6283: 
                   6284:     If two libraries have identical CURRENT and AGE numbers, then the
                   6285:     dynamic linker chooses the library with the greater REVISION number.
                   6286: 
                   6287:     The "-release" option will produce different results for a.out and ELF
1.25      wiz      6288:     (excluding symlinks) in only one case. An ELF library of the form "
                   6289:     libfoo-release.so.x.y" will have a symlink of "libfoo.so.x.y" on an a.out
1.1       dsieger  6290:     platform. This is handled automatically.
                   6291: 
                   6292:     The "-rpath argument" is the install directory of the library being built.
                   6293: 
                   6294:     In the PLIST, include only the .la file, the other files will be added
                   6295:     automatically.
                   6296: 
                   6297:  4. When linking shared object (.so) files, i.e. files that are loaded via
                   6298:     dlopen(3), NOT shared libraries, use "-module -avoid-version" to prevent
                   6299:     them getting version tacked on.
                   6300: 
                   6301:     The PLIST file gets the foo.so entry.
                   6302: 
                   6303:  5. When linking programs that depend on these libraries before they are
                   6304:     installed, preface the cc(1) or ld(1) line with "${LIBTOOL} --mode=link",
                   6305:     and it will find the correct libraries (static or shared), but please be
                   6306:     aware that libtool will not allow you to specify a relative path in -L
                   6307:     (such as "-L../somelib"), because it expects you to change that argument to
                   6308:     be the .la file. e.g.
                   6309: 
                   6310:     ${LIBTOOL} --mode=link ${CC} -o someprog -L../somelib -lsomelib
                   6311: 
                   6312:     should be changed to:
                   6313: 
                   6314:     ${LIBTOOL} --mode=link ${CC} -o someprog ../somelib/somelib.la
                   6315: 
                   6316:     and it will do the right thing with the libraries.
                   6317: 
                   6318:  6. When installing libraries, preface the install(1) or cp(1) command with "$
                   6319:     {LIBTOOL} --mode=install", and change the library name to .la. e.g.
                   6320: 
1.23      jakllsch 6321:     ${LIBTOOL} --mode=install ${BSD_INSTALL_LIB} ${SOMELIB:.a=.la} ${PREFIX}/lib
1.1       dsieger  6322: 
                   6323:     This will install the static .a, shared library, any needed symlinks, and
                   6324:     run ldconfig(8).
                   6325: 
                   6326:  7. In your PLIST, include only the .la file (this is a change from previous
                   6327:     behaviour).
                   6328: 
1.6       rillig   6329: 19.3.2. Using libtool on GNU packages that already support libtool
1.1       dsieger  6330: 
                   6331: Add USE_LIBTOOL=yes to the package Makefile. This will override the package's
                   6332: own libtool in most cases. For older libtool using packages, libtool is made by
                   6333: ltconfig script during the do-configure step; you can check the libtool script
                   6334: location by doing make configure; find work*/ -name libtool.
                   6335: 
                   6336: LIBTOOL_OVERRIDE specifies which libtool scripts, relative to WRKSRC, to
                   6337: override. By default, it is set to "libtool */libtool */*/libtool". If this
                   6338: does not match the location of the package's libtool script(s), set it as
                   6339: appropriate.
                   6340: 
                   6341: If you do not need *.a static libraries built and installed, then use
                   6342: SHLIBTOOL_OVERRIDE instead.
                   6343: 
                   6344: If your package makes use of the platform-independent library for loading
                   6345: dynamic shared objects, that comes with libtool (libltdl), you should include
                   6346: devel/libltdl/buildlink3.mk.
                   6347: 
                   6348: Some packages use libtool incorrectly so that the package may not work or build
                   6349: in some circumstances. Some of the more common errors are:
                   6350: 
                   6351:   * The inclusion of a shared object (-module) as a dependent library in an
                   6352:     executable or library. This in itself isn't a problem if one of two things
                   6353:     has been done:
                   6354: 
                   6355:      1. The shared object is named correctly, i.e. libfoo.la, not foo.la
                   6356: 
                   6357:      2. The -dlopen option is used when linking an executable.
                   6358: 
                   6359:   * The use of libltdl without the correct calls to initialisation routines.
                   6360:     The function lt_dlinit() should be called and the macro
                   6361:     LTDL_SET_PRELOADED_SYMBOLS included in executables.
                   6362: 
1.6       rillig   6363: 19.3.3. GNU Autoconf/Automake
1.1       dsieger  6364: 
                   6365: If a package needs GNU autoconf or automake to be executed to regenerate the
                   6366: configure script and Makefile.in makefile templates, then they should be
                   6367: executed in a pre-configure target.
                   6368: 
                   6369: For packages that need only autoconf:
                   6370: 
                   6371: AUTOCONF_REQD=  2.50            # if default version is not good enough
                   6372: USE_TOOLS+=     autoconf        # use "autoconf213" for autoconf-2.13
                   6373: ...
                   6374: 
                   6375: pre-configure:
                   6376:         cd ${WRKSRC} && autoconf
                   6377: 
                   6378: ...
                   6379: 
                   6380: and for packages that need automake and autoconf:
                   6381: 
                   6382: AUTOMAKE_REQD=  1.7.1           # if default version is not good enough
                   6383: USE_TOOLS+=     automake        # use "automake14" for automake-1.4
                   6384: ...
                   6385: 
                   6386: pre-configure:
                   6387:         set -e; cd ${WRKSRC}; \
                   6388:         aclocal; autoheader; automake -a --foreign -i; autoconf
                   6389: 
                   6390: ...
                   6391: 
                   6392: Packages which use GNU Automake will almost certainly require GNU Make.
                   6393: 
                   6394: There are times when the configure process makes additional changes to the
                   6395: generated files, which then causes the build process to try to re-execute the
                   6396: automake sequence. This is prevented by touching various files in the configure
                   6397: stage. If this causes problems with your package you can set AUTOMAKE_OVERRIDE=
                   6398: NO in the package Makefile.
                   6399: 
1.6       rillig   6400: 19.4. Programming languages
1.1       dsieger  6401: 
1.6       rillig   6402: 19.4.1. C, C++, and Fortran
1.1       dsieger  6403: 
                   6404: Compilers for the C, C++, and Fortran languages comes with the NetBSD base
                   6405: system. By default, pkgsrc assumes that a package is written in C and will hide
1.6       rillig   6406: all other compilers (via the wrapper framework, see Chapter 14, Buildlink
1.1       dsieger  6407: methodology).
                   6408: 
                   6409: To declare which language's compiler a package needs, set the USE_LANGUAGES
                   6410: variable. Allowed values currently are "c", "c++", and "fortran" (and any
                   6411: combination). The default is "c". Packages using GNU configure scripts, even if
                   6412: written in C++, usually need a C compiler for the configure phase.
                   6413: 
1.6       rillig   6414: 19.4.2. Java
1.1       dsieger  6415: 
                   6416: If a program is written in Java, use the Java framework in pkgsrc. The package
                   6417: must include ../../mk/java-vm.mk. This Makefile fragment provides the following
                   6418: variables:
                   6419: 
                   6420:   * USE_JAVA defines if a build dependency on the JDK is added. If USE_JAVA is
                   6421:     set to "run", then there is only a runtime dependency on the JDK. The
                   6422:     default is "yes", which also adds a build dependency on the JDK.
                   6423: 
                   6424:   * Set USE_JAVA2 to declare that a package needs a Java2 implementation. The
                   6425:     supported values are "yes", "1.4", and "1.5". "yes" accepts any Java2
                   6426:     implementation, "1.4" insists on versions 1.4 or above, and "1.5" only
                   6427:     accepts versions 1.5 or above. This variable is not set by default.
                   6428: 
1.25      wiz      6429:   * PKG_JAVA_HOME is automatically set to the runtime location of the used Java
                   6430:     implementation dependency. It may be used to set JAVA_HOME to a good value
                   6431:     if the program needs this variable to be defined.
                   6432: 
1.6       rillig   6433: 19.4.3. Packages containing perl scripts
1.1       dsieger  6434: 
                   6435: If your package contains interpreted perl scripts, add "perl" to the USE_TOOLS
                   6436: variable and set REPLACE_PERL to ensure that the proper interpreter path is
                   6437: set. REPLACE_PERL should contain a list of scripts, relative to WRKSRC, that
1.74      wiz      6438: you want adjusted. Every occurrence of */bin/perl in a she-bang line will be
                   6439: replaced with the full path to the perl executable.
1.1       dsieger  6440: 
                   6441: If a particular version of perl is needed, set the PERL5_REQD variable to the
                   6442: version number. The default is "5.0".
                   6443: 
1.6       rillig   6444: See Section 19.6.6, "Packages installing perl modules" for information about
1.1       dsieger  6445: handling perl modules.
                   6446: 
1.41      wiz      6447: 19.4.4. Packages containing shell scripts
                   6448: 
                   6449: REPLACE_SH, REPLACE_BASH, REPLACE_CSH, and REPLACE_KSH can be used to replace
                   6450: shell hash bangs in files. Please use the appropriate one, prefering REPLACE_SH
1.74      wiz      6451: in case this shell is sufficient. Each should contain a list of scripts,
                   6452: relative to WRKSRC, that you want adjusted. Every occurrence of the matching
                   6453: shell in a she-bang line will be replaced with the full path to the shell
                   6454: executable. When using REPLACE_BASH, don't forget to add bash to USE_TOOLS.
1.41      wiz      6455: 
                   6456: 19.4.5. Other programming languages
1.1       dsieger  6457: 
                   6458: Currently, there is no special handling for other languages in pkgsrc. If a
                   6459: compiler package provides a buildlink3.mk file, include that, otherwise just
                   6460: add a (build) dependency on the appropriate compiler package.
                   6461: 
1.108     rillig   6462: 19.5. The build phase
1.1       dsieger  6463: 
                   6464: The most common failures when building a package are that some platforms do not
                   6465: provide certain header files, functions or libraries, or they provide the
                   6466: functions in a library that the original package author didn't know. To work
                   6467: around this, you can rewrite the source code in most cases so that it does not
                   6468: use the missing functions or provides a replacement function.
                   6469: 
1.6       rillig   6470: 19.5.1. Compiling C and C++ code conditionally
1.1       dsieger  6471: 
                   6472: If a package already comes with a GNU configure script, the preferred way to
                   6473: fix the build failure is to change the configure script, not the code. In the
                   6474: other cases, you can utilize the C preprocessor, which defines certain macros
                   6475: depending on the operating system and hardware architecture it compiles for.
                   6476: These macros can be queried using for example #if defined(__i386). Almost every
                   6477: operating system, hardware architecture and compiler has its own macro. For
                   6478: example, if the macros __GNUC__, __i386__ and __NetBSD__ are all defined, you
                   6479: know that you are using NetBSD on an i386 compatible CPU, and your compiler is
                   6480: GCC.
                   6481: 
                   6482: The list of the following macros for hardware and operating system depends on
                   6483: the compiler that is used. For example, if you want to conditionally compile
                   6484: code on Solaris, don't use __sun__, as the SunPro compiler does not define it.
                   6485: Use __sun instead.
                   6486: 
1.6       rillig   6487: 19.5.1.1. C preprocessor macros to identify the operating system
1.1       dsieger  6488: 
                   6489: To distinguish between 4.4 BSD-derived systems and the rest of the world, you
                   6490: should use the following code.
                   6491: 
                   6492: #include <sys/param.h>
                   6493: #if (defined(BSD) && BSD >= 199306)
                   6494: /* BSD-specific code goes here */
                   6495: #else
                   6496: /* non-BSD-specific code goes here */
                   6497: #endif
                   6498: 
                   6499: If this distinction is not fine enough, you can also test for the following
                   6500: macros.
                   6501: 
1.46      obache   6502: Cygwin      __CYGWIN__
                   6503: DragonFly   __DragonFly__
1.1       dsieger  6504: FreeBSD     __FreeBSD__
1.46      obache   6505: Haiku       __HAIKU__
1.1       dsieger  6506: Interix     __INTERIX
                   6507: IRIX        __sgi (TODO: get a definite source for this)
                   6508: Linux       linux, __linux, __linux__
1.83      dholland 6509: Mac OS X    __APPLE__
1.46      obache   6510: MirBSD      __MirBSD__ (__OpenBSD__ is also defined)
                   6511: Minix3      __minix
1.1       dsieger  6512: NetBSD      __NetBSD__
                   6513: OpenBSD     __OpenBSD__
                   6514: Solaris     sun, __sun
                   6515: 
1.6       rillig   6516: 19.5.1.2. C preprocessor macros to identify the hardware architecture
1.1       dsieger  6517: 
                   6518: i386        i386, __i386, __i386__
                   6519: MIPS        __mips
                   6520: SPARC       sparc, __sparc
                   6521: 
1.6       rillig   6522: 19.5.1.3. C preprocessor macros to identify the compiler
1.1       dsieger  6523: 
                   6524: GCC         __GNUC__ (major version), __GNUC_MINOR__
                   6525: MIPSpro     _COMPILER_VERSION (0x741 for MIPSpro 7.41)
                   6526: SunPro      __SUNPRO_C (0x570 for Sun C 5.7)
                   6527: SunPro C++  __SUNPRO_CC (0x580 for Sun C++ 5.8)
                   6528: 
1.6       rillig   6529: 19.5.2. How to handle compiler bugs
1.1       dsieger  6530: 
                   6531: Some source files trigger bugs in the compiler, based on combinations of
                   6532: compiler version and architecture and almost always relation to optimisation
                   6533: being enabled. Common symptoms are gcc internal errors or never finishing
                   6534: compiling a file.
                   6535: 
                   6536: Typically, a workaround involves testing the MACHINE_ARCH and compiler version,
1.87      tnn      6537: disabling optimisation for that combination of file, MACHINE_ARCH and compiler.
                   6538: 
                   6539: This used to be a big problem in the past, but is rarely needed now as compiler
                   6540: technology has matured. If you still need to add a compiler specific
                   6541: workaround, please do so in the file hacks.mk and describe the symptom and
                   6542: compiler version as detailed as possible.
1.1       dsieger  6543: 
1.6       rillig   6544: 19.5.3. Undefined reference to "..."
1.1       dsieger  6545: 
                   6546: This error message often means that a package did not link to a shared library
                   6547: it needs. The following functions are known to cause this error message over
                   6548: and over.
                   6549: 
                   6550: +-----------------------------------------------------+
                   6551: |        Function         |Library |Affected platforms|
                   6552: |-------------------------+--------+------------------|
                   6553: |accept, bind, connect    |-lsocket|Solaris           |
                   6554: |-------------------------+--------+------------------|
                   6555: |crypt                    |-lcrypt |DragonFly, NetBSD |
                   6556: |-------------------------+--------+------------------|
                   6557: |dlopen, dlsym            |-ldl    |Linux             |
                   6558: |-------------------------+--------+------------------|
                   6559: |gethost*                 |-lnsl   |Solaris           |
                   6560: |-------------------------+--------+------------------|
                   6561: |inet_aton                |-lresolv|Solaris           |
                   6562: |-------------------------+--------+------------------|
                   6563: |nanosleep, sem_*, timer_*|-lrt    |Solaris           |
                   6564: |-------------------------+--------+------------------|
                   6565: |openpty                  |-lutil  |Linux             |
                   6566: +-----------------------------------------------------+
                   6567: 
                   6568: To fix these linker errors, it is often sufficient to say LIBS.OperatingSystem+
                   6569: = -lfoo to the package Makefile and then say bmake clean; bmake.
                   6570: 
1.6       rillig   6571: 19.5.3.1. Special issue: The SunPro compiler
1.1       dsieger  6572: 
                   6573: When you are using the SunPro compiler, there is another possibility. That
                   6574: compiler cannot handle the following code:
                   6575: 
                   6576: extern int extern_func(int);
                   6577: 
                   6578: static inline int
                   6579: inline_func(int x)
                   6580: {
                   6581:         return extern_func(x);
                   6582: }
                   6583: 
                   6584: int main(void)
                   6585: {
                   6586:         return 0;
                   6587: }
                   6588: 
                   6589: It generates the code for inline_func even if that function is never used. This
                   6590: code then refers to extern_func, which can usually not be resolved. To solve
                   6591: this problem you can try to tell the package to disable inlining of functions.
                   6592: 
1.6       rillig   6593: 19.5.4. Running out of memory
1.1       dsieger  6594: 
                   6595: Sometimes packages fail to build because the compiler runs into an operating
                   6596: system specific soft limit. With the UNLIMIT_RESOURCES variable pkgsrc can be
1.94      wiz      6597: told to unlimit the resources. Currently, the allowed values are any
                   6598: combination of "cputime", "datasize", "memorysize", and "stacksize". Setting
                   6599: this variable is similar to running the shell builtin ulimit command to raise
                   6600: the maximum data segment size or maximum stack size of a process, respectively,
                   6601: to their hard limits.
1.1       dsieger  6602: 
1.108     rillig   6603: 19.6. The install phase
1.1       dsieger  6604: 
1.6       rillig   6605: 19.6.1. Creating needed directories
1.1       dsieger  6606: 
                   6607: The BSD-compatible install supplied with some operating systems cannot create
                   6608: more than one directory at a time. As such, you should call ${INSTALL_*_DIR}
                   6609: like this:
                   6610: 
                   6611: ${INSTALL_DATA_DIR} ${PREFIX}/dir1
                   6612: ${INSTALL_DATA_DIR} ${PREFIX}/dir2
                   6613: 
                   6614: You can also just append "dir1 dir2" to the INSTALLATION_DIRS variable, which
                   6615: will automatically do the right thing.
                   6616: 
1.6       rillig   6617: 19.6.2. Where to install documentation
1.1       dsieger  6618: 
                   6619: In general, documentation should be installed into ${PREFIX}/share/doc/$
                   6620: {PKGBASE} or ${PREFIX}/share/doc/${PKGNAME} (the latter includes the version
                   6621: number of the package).
                   6622: 
                   6623: Many modern packages using GNU autoconf allow to set the directory where HTML
                   6624: documentation is installed with the "--with-html-dir" option. Sometimes using
                   6625: this flag is needed because otherwise the documentation ends up in ${PREFIX}/
                   6626: share/doc/html or other places.
                   6627: 
                   6628: An exception to the above is that library API documentation generated with the
                   6629: textproc/gtk-doc tools, for use by special browsers (devhelp) should be left at
                   6630: their default location, which is ${PREFIX}/share/gtk-doc. Such documentation
                   6631: can be recognized from files ending in .devhelp or .devhelp2. (It is also
                   6632: acceptable to install such files in ${PREFIX}/share/doc/${PKGBASE} or ${PREFIX}
                   6633: /share/doc/${PKGNAME}; the .devhelp* file must be directly in that directory
                   6634: then, no additional subdirectory level is allowed in this case. This is usually
                   6635: achieved by using "--with-html-dir=${PREFIX}/share/doc". ${PREFIX}/share/
                   6636: gtk-doc is preferred though.)
                   6637: 
1.6       rillig   6638: 19.6.3. Installing highscore files
1.1       dsieger  6639: 
                   6640: Certain packages, most of them in the games category, install a score file that
                   6641: allows all users on the system to record their highscores. In order for this to
                   6642: work, the binaries need to be installed setgid and the score files owned by the
1.36      wiz      6643: appropriate group and/or owner (traditionally the "games" user/group). Set
                   6644: USE_GAMESGROUP to yes to support this. The following variables, documented in
                   6645: more detail in mk/defaults/mk.conf, control this behaviour: GAMEDATAMODE,
1.100     leot     6646: GAMEDIRMODE, GAMES_GROUP, GAMEMODE, GAME_USER. Other useful variables are:
                   6647: GAMEDIR_PERMS, GAMEDATA_PERMS and SETGID_GAMES_PERMS.
                   6648: 
                   6649: An example that illustrates some of the variables described above is games/
                   6650: moon-buggy. OWN_DIRS_PERMS is used to properly set directory permissions of the
                   6651: directory where the scorefile is saved, REQD_FILES_PERMS is used to create a
                   6652: dummy scorefile (mbscore) with the proper permissions and SPECIAL_PERMS is used
                   6653: to install setgid the game binary:
                   6654: 
                   6655: USE_GAMESGROUP=         yes
                   6656: 
                   6657: BUILD_DEFS+=            VARBASE
                   6658: 
                   6659: OWN_DIRS_PERMS+=        ${VARBASE}/games/moon-buggy ${GAMEDIR_PERMS}
                   6660: REQD_FILES_PERMS+=      /dev/null ${VARBASE}/games/moon-buggy/mbscore ${GAMEDATA_PERMS}
                   6661: SPECIAL_PERMS+=         ${PREFIX}/bin/moon-buggy ${SETGID_GAMES_PERMS}
                   6662: 
                   6663: Various INSTALL_* variables are also available: INSTALL_GAME to install setgid
                   6664: game binaries, INSTALL_GAME_DIR to install game directories that are needed to
                   6665: be accessed by setgid games and INSTALL_GAME_DATA to install scorefiles.
1.1       dsieger  6666: 
1.14      jmcneill 6667: A package should therefore never hard code file ownership or access permissions
1.100     leot     6668: but rely on *_PERMS as described above or alternatively on INSTALL_GAME,
                   6669: INSTALL_GAME_DATA and INSTALL_GAME_DIR to set these correctly.
1.1       dsieger  6670: 
1.6       rillig   6671: 19.6.4. Adding DESTDIR support to packages
1.4       rillig   6672: 
1.14      jmcneill 6673: DESTDIR support means that a package installs into a staging directory, not the
                   6674: final location of the files. Then a binary package is created which can be used
                   6675: for installation as usual. There are two ways: Either the package must install
1.25      wiz      6676: as root ("destdir") or the package can install as non-root user ("user-destdir"
                   6677: ).
1.14      jmcneill 6678: 
1.113     leot     6679:   * PKG_DESTDIR_SUPPORT has to be set to "destdir" or "user-destdir". By
                   6680:     default PKG_DESTDIR_SUPPORT is set to "user-destdir" to help catching more
                   6681:     potential packaging problems. If bsd.prefs.mk is included in the Makefile,
                   6682:     PKG_DESTDIR_SUPPORT needs to be set before the inclusion.
1.14      jmcneill 6683: 
1.4       rillig   6684:   * All installation operations have to be prefixed with ${DESTDIR}.
                   6685: 
                   6686:   * automake gets this DESTDIR mostly right automatically. Many manual rules
                   6687:     and pre/post-install often are incorrect; fix them.
                   6688: 
1.17      imil     6689:   * If files are installed with special owner/group use SPECIAL_PERMS.
1.4       rillig   6690: 
                   6691:   * In general, packages should support UNPRIVILEGED to be able to use DESTDIR.
                   6692: 
1.6       rillig   6693: 19.6.5. Packages with hardcoded paths to other interpreters
1.1       dsieger  6694: 
                   6695: Your package may also contain scripts with hardcoded paths to other
                   6696: interpreters besides (or as well as) perl. To correct the full pathname to the
                   6697: script interpreter, you need to set the following definitions in your Makefile
                   6698: (we shall use tclsh in this example):
                   6699: 
                   6700: REPLACE_INTERPRETER+=   tcl
                   6701: REPLACE.tcl.old=        .*/bin/tclsh
                   6702: REPLACE.tcl.new=        ${PREFIX}/bin/tclsh
                   6703: REPLACE_FILES.tcl=      # list of tcl scripts which need to be fixed,
                   6704: # relative to ${WRKSRC}, just as in REPLACE_PERL
                   6705: 
                   6706: Note
                   6707: 
                   6708: Before March 2006, these variables were called _REPLACE.* and _REPLACE_FILES.*.
                   6709: 
1.6       rillig   6710: 19.6.6. Packages installing perl modules
1.1       dsieger  6711: 
                   6712: Makefiles of packages providing perl5 modules should include the Makefile
                   6713: fragment ../../lang/perl5/module.mk. It provides a do-configure target for the
                   6714: standard perl configuration for such modules as well as various hooks to tune
                   6715: this configuration. See comments in this file for details.
                   6716: 
                   6717: Perl5 modules will install into different places depending on the version of
                   6718: perl used during the build process. To address this, pkgsrc will append lines
                   6719: to the PLIST corresponding to the files listed in the installed .packlist file
                   6720: generated by most perl5 modules. This is invoked by defining PERL5_PACKLIST to
1.48      wiz      6721: a space-separated list of packlist files relative to PERL5_PACKLIST_DIR
                   6722: (PERL5_INSTALLVENDORARCH by default), e.g.:
1.1       dsieger  6723: 
1.48      wiz      6724: PERL5_PACKLIST= auto/Pg/.packlist
1.1       dsieger  6725: 
1.48      wiz      6726: The perl5 config variables installarchlib, installscript, installvendorbin,
                   6727: installvendorscript, installvendorarch, installvendorlib, installvendorman1dir,
                   6728: and installvendorman3dir represent those locations in which components of perl5
                   6729: modules may be installed, provided as variable with uppercase and prefixed with
                   6730: PERL5_, e.g. PERL5_INSTALLARCHLIB and may be used by perl5 packages that don't
                   6731: have a packlist. These variables are also substituted for in the PLIST as
                   6732: uppercase prefixed with PERL5_SUB_.
1.1       dsieger  6733: 
1.6       rillig   6734: 19.6.7. Packages installing info files
1.1       dsieger  6735: 
                   6736: Some packages install info files or use the "makeinfo" or "install-info"
                   6737: commands. INFO_FILES should be defined in the package Makefile so that INSTALL
                   6738: and DEINSTALL scripts will be generated to handle registration of the info
                   6739: files in the Info directory file. The "install-info" command used for the info
                   6740: files registration is either provided by the system, or by a special purpose
                   6741: package automatically added as dependency if needed.
                   6742: 
                   6743: PKGINFODIR is the directory under ${PREFIX} where info files are primarily
                   6744: located. PKGINFODIR defaults to "info" and can be overridden by the user.
                   6745: 
                   6746: The info files for the package should be listed in the package PLIST; however
                   6747: any split info files need not be listed.
                   6748: 
                   6749: A package which needs the "makeinfo" command at build time must add "makeinfo"
                   6750: to USE_TOOLS in its Makefile. If a minimum version of the "makeinfo" command is
                   6751: needed it should be noted with the TEXINFO_REQD variable in the package
                   6752: Makefile. By default, a minimum version of 3.12 is required. If the system does
                   6753: not provide a makeinfo command or if it does not match the required minimum, a
                   6754: build dependency on the devel/gtexinfo package will be added automatically.
                   6755: 
                   6756: The build and installation process of the software provided by the package
                   6757: should not use the install-info command as the registration of info files is
1.25      wiz      6758: the task of the package INSTALL script, and it must use the appropriate 
1.1       dsieger  6759: makeinfo command.
                   6760: 
                   6761: To achieve this goal, the pkgsrc infrastructure creates overriding scripts for
                   6762: the install-info and makeinfo commands in a directory listed early in PATH.
                   6763: 
                   6764: The script overriding install-info has no effect except the logging of a
                   6765: message. The script overriding makeinfo logs a message and according to the
                   6766: value of TEXINFO_REQD either runs the appropriate makeinfo command or exit on
                   6767: error.
                   6768: 
1.6       rillig   6769: 19.6.8. Packages installing man pages
1.1       dsieger  6770: 
                   6771: All packages that install manual pages should install them into the same
                   6772: directory, so that there is one common place to look for them. In pkgsrc, this
                   6773: place is ${PREFIX}/${PKGMANDIR}, and this expression should be used in
1.25      wiz      6774: packages. The default for PKGMANDIR is "man". Another often-used value is "
                   6775: share/man".
1.1       dsieger  6776: 
                   6777: Note
                   6778: 
                   6779: The support for a custom PKGMANDIR is far from complete.
                   6780: 
                   6781: The PLIST files can just use man/ as the top level directory for the man page
                   6782: file entries, and the pkgsrc framework will convert as needed. In all other
                   6783: places, the correct PKGMANDIR must be used.
                   6784: 
                   6785: Packages that are configured with GNU_CONFIGURE set as "yes", by default will
                   6786: use the ./configure --mandir switch to set where the man pages should be
                   6787: installed. The path is GNU_CONFIGURE_MANDIR which defaults to ${PREFIX}/$
                   6788: {PKGMANDIR}.
                   6789: 
                   6790: Packages that use GNU_CONFIGURE but do not use --mandir, can set
                   6791: CONFIGURE_HAS_MANDIR to "no". Or if the ./configure script uses a non-standard
                   6792: use of --mandir, you can set GNU_CONFIGURE_MANDIR as needed.
                   6793: 
1.6       rillig   6794: See Section 13.5, "Man page compression" for information on installation of
1.1       dsieger  6795: compressed manual pages.
                   6796: 
1.7       rillig   6797: 19.6.9. Packages installing GConf data files
1.1       dsieger  6798: 
1.7       rillig   6799: If a package installs .schemas or .entries files, used by GConf, you need to
1.1       dsieger  6800: take some extra steps to make sure they get registered in the database:
                   6801: 
1.7       rillig   6802:  1. Include ../../devel/GConf/schemas.mk instead of its buildlink3.mk file.
                   6803:     This takes care of rebuilding the GConf database at installation and
                   6804:     deinstallation time, and tells the package where to install GConf data
1.1       dsieger  6805:     files using some standard configure arguments. It also disallows any access
                   6806:     to the database directly from the package.
                   6807: 
                   6808:  2. Ensure that the package installs its .schemas files under ${PREFIX}/share/
                   6809:     gconf/schemas. If they get installed under ${PREFIX}/etc, you will need to
                   6810:     manually patch the package.
                   6811: 
                   6812:  3. Check the PLIST and remove any entries under the etc/gconf directory, as
1.84      wiz      6813:     they will be handled automatically. See Section 9.13, "How do I change the
1.1       dsieger  6814:     location of configuration files?" for more information.
                   6815: 
1.7       rillig   6816:  4. Define the GCONF_SCHEMAS variable in your Makefile with a list of all
1.1       dsieger  6817:     .schemas files installed by the package, if any. Names must not contain any
                   6818:     directories in them.
                   6819: 
1.7       rillig   6820:  5. Define the GCONF_ENTRIES variable in your Makefile with a list of all
1.1       dsieger  6821:     .entries files installed by the package, if any. Names must not contain any
                   6822:     directories in them.
                   6823: 
1.18      mishka   6824: 19.6.10. Packages installing scrollkeeper/rarian data files
1.1       dsieger  6825: 
1.18      mishka   6826: If a package installs .omf files, used by scrollkeeper/rarian, you need to take
                   6827: some extra steps to make sure they get registered in the database:
1.1       dsieger  6828: 
1.18      mishka   6829:  1. Include ../../mk/omf-scrollkeeper.mk instead of rarian's buildlink3.mk
                   6830:     file. This takes care of rebuilding the scrollkeeper database at
                   6831:     installation and deinstallation time, and disallows any access to it
                   6832:     directly from the package.
1.1       dsieger  6833: 
                   6834:  2. Check the PLIST and remove any entries under the libdata/scrollkeeper
                   6835:     directory, as they will be handled automatically.
                   6836: 
                   6837:  3. Remove the share/omf directory from the PLIST. It will be handled by
1.18      mishka   6838:     rarian. (make print-PLIST does this automatically.)
1.1       dsieger  6839: 
1.6       rillig   6840: 19.6.11. Packages installing X11 fonts
1.1       dsieger  6841: 
                   6842: If a package installs font files, you will need to rebuild the fonts database
                   6843: in the directory where they get installed at installation and deinstallation
                   6844: time. This can be automatically done by using the pkginstall framework.
                   6845: 
                   6846: You can list the directories where fonts are installed in the FONTS_DIRS.type
                   6847: variables, where type can be one of "ttf", "type1" or "x11". Also make sure
                   6848: that the database file fonts.dir is not listed in the PLIST.
                   6849: 
                   6850: Note that you should not create new directories for fonts; instead use the
                   6851: standard ones to avoid that the user needs to manually configure his X server
                   6852: to find them.
                   6853: 
1.6       rillig   6854: 19.6.12. Packages installing GTK2 modules
1.1       dsieger  6855: 
                   6856: If a package installs GTK2 immodules or loaders, you need to take some extra
                   6857: steps to get them registered in the GTK2 database properly:
                   6858: 
                   6859:  1. Include ../../x11/gtk2/modules.mk instead of its buildlink3.mk file. This
                   6860:     takes care of rebuilding the database at installation and deinstallation
                   6861:     time.
                   6862: 
                   6863:  2. Set GTK2_IMMODULES=YES if your package installs GTK2 immodules.
                   6864: 
                   6865:  3. Set GTK2_LOADERS=YES if your package installs GTK2 loaders.
                   6866: 
                   6867:  4. Patch the package to not touch any of the GTK2 databases directly. These
                   6868:     are:
                   6869: 
1.42      asau     6870:       + libdata/gtk-2.0/gdk-pixbuf.loaders
1.1       dsieger  6871: 
1.42      asau     6872:       + libdata/gtk-2.0/gtk.immodules
1.1       dsieger  6873: 
                   6874:  5. Check the PLIST and remove any entries under the libdata/gtk-2.0 directory,
                   6875:     as they will be handled automatically.
                   6876: 
1.6       rillig   6877: 19.6.13. Packages installing SGML or XML data
1.1       dsieger  6878: 
                   6879: If a package installs SGML or XML data files that need to be registered in
                   6880: system-wide catalogs (like DTDs, sub-catalogs, etc.), you need to take some
                   6881: extra steps:
                   6882: 
                   6883:  1. Include ../../textproc/xmlcatmgr/catalogs.mk in your Makefile, which takes
                   6884:     care of registering those files in system-wide catalogs at installation and
                   6885:     deinstallation time.
                   6886: 
                   6887:  2. Set SGML_CATALOGS to the full path of any SGML catalogs installed by the
                   6888:     package.
                   6889: 
                   6890:  3. Set XML_CATALOGS to the full path of any XML catalogs installed by the
                   6891:     package.
                   6892: 
                   6893:  4. Set SGML_ENTRIES to individual entries to be added to the SGML catalog.
                   6894:     These come in groups of three strings; see xmlcatmgr(1) for more
                   6895:     information (specifically, arguments recognized by the 'add' action). Note
                   6896:     that you will normally not use this variable.
                   6897: 
                   6898:  5. Set XML_ENTRIES to individual entries to be added to the XML catalog. These
                   6899:     come in groups of three strings; see xmlcatmgr(1) for more information
                   6900:     (specifically, arguments recognized by the 'add' action). Note that you
                   6901:     will normally not use this variable.
                   6902: 
1.6       rillig   6903: 19.6.14. Packages installing extensions to the MIME database
1.1       dsieger  6904: 
                   6905: If a package provides extensions to the MIME database by installing .xml files
                   6906: inside ${PREFIX}/share/mime/packages, you need to take some extra steps to
                   6907: ensure that the database is kept consistent with respect to these new files:
                   6908: 
                   6909:  1. Include ../../databases/shared-mime-info/mimedb.mk (avoid using the
                   6910:     buildlink3.mk file from this same directory, which is reserved for
                   6911:     inclusion from other buildlink3.mk files). It takes care of rebuilding the
                   6912:     MIME database at installation and deinstallation time, and disallows any
                   6913:     access to it directly from the package.
                   6914: 
1.25      wiz      6915:  2. Check the PLIST and remove any entries under the share/mime directory, 
1.1       dsieger  6916:     except for files saved under share/mime/packages. The former are handled
                   6917:     automatically by the update-mime-database program, but the latter are
                   6918:     package-dependent and must be removed by the package that installed them in
                   6919:     the first place.
                   6920: 
                   6921:  3. Remove any share/mime/* directories from the PLIST. They will be handled by
                   6922:     the shared-mime-info package.
                   6923: 
1.6       rillig   6924: 19.6.15. Packages using intltool
1.1       dsieger  6925: 
                   6926: If a package uses intltool during its build, add intltool to the USE_TOOLS,
                   6927: which forces it to use the intltool package provided by pkgsrc, instead of the
                   6928: one bundled with the distribution file.
                   6929: 
                   6930: This tracks intltool's build-time dependencies and uses the latest available
                   6931: version; this way, the package benefits of any bug fixes that may have appeared
                   6932: since it was released.
                   6933: 
1.6       rillig   6934: 19.6.16. Packages installing startup scripts
1.1       dsieger  6935: 
                   6936: If a package contains a rc.d script, it won't be copied into the startup
                   6937: directory by default, but you can enable it, by adding the option
1.4       rillig   6938: PKG_RCD_SCRIPTS=YES in mk.conf. This option will copy the scripts into /etc/
                   6939: rc.d when a package is installed, and it will automatically remove the scripts
                   6940: when the package is deinstalled.
1.1       dsieger  6941: 
1.6       rillig   6942: 19.6.17. Packages installing TeX modules
1.1       dsieger  6943: 
                   6944: If a package installs TeX packages into the texmf tree, the ls-R database of
                   6945: the tree needs to be updated.
                   6946: 
                   6947: Note
                   6948: 
1.23      jakllsch 6949: Except the main TeX packages such as kpathsea, packages should install files
                   6950: into ${PREFIX}/share/texmf-dist, not ${PREFIX}/share/texmf.
1.1       dsieger  6951: 
1.23      jakllsch 6952:  1. Include ../../print/kpathsea/texmf.mk. This takes care of rebuilding the
                   6953:     ls-R database at installation and deinstallation time.
1.1       dsieger  6954: 
1.23      jakllsch 6955:  2. If your package installs files into a texmf tree other than the one at $
                   6956:     {PREFIX}/share/texmf-dist, set TEX_TEXMF_DIRS to the list of all texmf
                   6957:     trees that need database update.
1.1       dsieger  6958: 
                   6959:     If your package also installs font map files that need to be registered
1.30      dholland 6960:     using updmap, include ../../print/tex-tetex/map.mk and set TEX_MAP_FILES
                   6961:     and/or TEX_MIXEDMAP_FILES to the list of all such font map files. Then 
                   6962:     updmap will be run automatically at installation/deinstallation to enable/
                   6963:     disable font map files for TeX output drivers.
1.1       dsieger  6964: 
                   6965:  3. Make sure that none of ls-R databases are included in PLIST, as they will
1.30      dholland 6966:     be removed only by the kpathsea package.
1.1       dsieger  6967: 
1.6       rillig   6968: 19.6.18. Packages supporting running binaries in emulation
1.1       dsieger  6969: 
                   6970: There are some packages that provide libraries and executables for running
                   6971: binaries from a one operating system on a different one (if the latter supports
                   6972: it). One example is running Linux binaries on NetBSD.
                   6973: 
                   6974: The pkgtools/rpm2pkg helps in extracting and packaging Linux rpm packages.
                   6975: 
                   6976: The CHECK_SHLIBS can be set to no to avoid the check-shlibs target, which tests
                   6977: if all libraries for each installed executable can be found by the dynamic
                   6978: linker. Since the standard dynamic linker is run, this fails for emulation
                   6979: packages, because the libraries used by the emulation are not in the standard
                   6980: directories.
                   6981: 
1.6       rillig   6982: 19.6.19. Packages installing hicolor theme icons
1.1       dsieger  6983: 
                   6984: If a package installs images under the share/icons/hicolor and/or updates the
                   6985: share/icons/hicolor/icon-theme.cache database, you need to take some extra
                   6986: steps to make sure that the shared theme directory is handled appropriately and
                   6987: that the cache database is rebuilt:
                   6988: 
                   6989:  1. Include ../../graphics/hicolor-icon-theme/buildlink3.mk.
                   6990: 
                   6991:  2. Check the PLIST and remove the entry that refers to the theme cache.
                   6992: 
                   6993:  3. Ensure that the PLIST does not remove the shared icon directories from the
                   6994:     share/icons/hicolor hierarchy because they will be handled automatically.
                   6995: 
                   6996: The best way to verify that the PLIST is correct with respect to the last two
                   6997: points is to regenerate it using make print-PLIST.
                   6998: 
1.6       rillig   6999: 19.6.20. Packages installing desktop files
1.1       dsieger  7000: 
                   7001: If a package installs .desktop files under share/applications and these include
1.54      rodent   7002: MIME information (MimeType key), you need to take extra steps to ensure that
                   7003: they are registered into the MIME database:
1.1       dsieger  7004: 
                   7005:  1. Include ../../sysutils/desktop-file-utils/desktopdb.mk.
                   7006: 
                   7007:  2. Check the PLIST and remove the entry that refers to the share/applications/
                   7008:     mimeinfo.cache file. It will be handled automatically.
                   7009: 
                   7010: The best way to verify that the PLIST is correct with respect to the last point
                   7011: is to regenerate it using make print-PLIST.
                   7012: 
1.6       rillig   7013: 19.7. Marking packages as having problems
1.1       dsieger  7014: 
1.23      jakllsch 7015: In some cases one does not have the time to solve a problem immediately. In
                   7016: this case, one can plainly mark a package as broken. For this, one just sets
                   7017: the variable BROKEN to the reason why the package is broken (similar to the
                   7018: RESTRICTED variable). A user trying to build the package will immediately be
                   7019: shown this message, and the build will not be even tried.
1.1       dsieger  7020: 
1.23      jakllsch 7021: BROKEN packages are removed from pkgsrc in irregular intervals.
1.1       dsieger  7022: 
1.6       rillig   7023: Chapter 20. Debugging
1.1       dsieger  7024: 
                   7025: To check out all the gotchas when building a package, here are the steps that I
                   7026: do in order to get a package working. Please note this is basically the same as
                   7027: what was explained in the previous sections, only with some debugging aids.
                   7028: 
1.4       rillig   7029:   * Be sure to set PKG_DEVELOPER=yes in mk.conf.
1.1       dsieger  7030: 
                   7031:   * Install pkgtools/url2pkg, create a directory for a new package, change into
                   7032:     it, then run url2pkg:
                   7033: 
                   7034:     % mkdir /usr/pkgsrc/category/examplepkg
                   7035:     % cd /usr/pkgsrc/category/examplepkg
                   7036:     % url2pkg http://www.example.com/path/to/distfile.tar.gz
                   7037: 
                   7038:   * Edit the Makefile as requested.
                   7039: 
                   7040:   * Fill in the DESCR file
                   7041: 
                   7042:   * Run make configure
                   7043: 
                   7044:   * Add any dependencies glimpsed from documentation and the configure step to
                   7045:     the package's Makefile.
                   7046: 
                   7047:   * Make the package compile, doing multiple rounds of
                   7048: 
                   7049:     % make
                   7050:     % pkgvi ${WRKSRC}/some/file/that/does/not/compile
                   7051:     % mkpatches
                   7052:     % patchdiff
                   7053:     % mv ${WRKDIR}/.newpatches/* patches
                   7054:     % make mps
                   7055:     % make clean
                   7056: 
                   7057:     Doing this step as non-root user will ensure that no files are modified
                   7058:     that shouldn't be, especially during the build phase. mkpatches, patchdiff
                   7059:     and pkgvi are from the pkgtools/pkgdiff package.
                   7060: 
1.6       rillig   7061:   * Look at the Makefile, fix if necessary; see Section 11.1, "Makefile".
1.1       dsieger  7062: 
                   7063:   * Generate a PLIST:
                   7064: 
                   7065:     # make install
                   7066:     # make print-PLIST >PLIST
                   7067:     # make deinstall
                   7068:     # make install
                   7069:     # make deinstall
                   7070: 
                   7071:     You usually need to be root to do this. Look if there are any files left:
                   7072: 
                   7073:     # make print-PLIST
                   7074: 
                   7075:     If this reveals any files that are missing in PLIST, add them.
                   7076: 
                   7077:   * Now that the PLIST is OK, install the package again and make a binary
                   7078:     package:
                   7079: 
                   7080:     # make reinstall
                   7081:     # make package
                   7082: 
                   7083:   * Delete the installed package:
                   7084: 
                   7085:     # pkg_delete examplepkg
                   7086: 
                   7087:   * Repeat the above make print-PLIST command, which shouldn't find anything
                   7088:     now:
                   7089: 
                   7090:     # make print-PLIST
                   7091: 
                   7092:   * Reinstall the binary package:
                   7093: 
                   7094:     # pkg_add .../examplepkg.tgz
                   7095: 
                   7096:   * Play with it. Make sure everything works.
                   7097: 
                   7098:   * Run pkglint from pkgtools/pkglint, and fix the problems it reports:
                   7099: 
                   7100:     # pkglint
                   7101: 
1.6       rillig   7102:   * Submit (or commit, if you have cvs access); see Chapter 21, Submitting and
1.1       dsieger  7103:     Committing.
                   7104: 
1.6       rillig   7105: Chapter 21. Submitting and Committing
1.1       dsieger  7106: 
                   7107: Table of Contents
                   7108: 
1.6       rillig   7109: 21.1. Submitting binary packages
                   7110: 21.2. Submitting source packages (for non-NetBSD-developers)
                   7111: 21.3. General notes when adding, updating, or removing packages
1.34      wiz      7112: 21.4. Committing: Adding a package to CVS
1.6       rillig   7113: 21.5. Updating a package to a newer version
1.21      snj      7114: 21.6. Renaming a package in pkgsrc
                   7115: 21.7. Moving a package in pkgsrc
1.1       dsieger  7116: 
1.6       rillig   7117: 21.1. Submitting binary packages
1.1       dsieger  7118: 
                   7119: Our policy is that we accept binaries only from pkgsrc developers to guarantee
                   7120: that the packages don't contain any trojan horses etc. This is not to annoy
                   7121: anyone but rather to protect our users! You're still free to put up your
                   7122: home-made binary packages and tell the world where to get them. NetBSD
1.66      asau     7123: developers doing bulk builds and wanting to upload them please see Chapter 7, 
                   7124: Creating binary packages for everything in pkgsrc (bulk builds).
1.1       dsieger  7125: 
1.6       rillig   7126: 21.2. Submitting source packages (for non-NetBSD-developers)
1.1       dsieger  7127: 
                   7128: First, check that your package is complete, compiles and runs well; see
1.6       rillig   7129: Chapter 20, Debugging and the rest of this document. Next, generate an
1.1       dsieger  7130: uuencoded gzipped tar(1) archive that contains all files that make up the
                   7131: package. Finally, send this package to the pkgsrc bug tracking system, either
                   7132: with the send-pr(1) command, or if you don't have that, go to the web page
1.4       rillig   7133: http://www.NetBSD.org/support/send-pr.html, which contains some instructions
1.22      snj      7134: and a link to a form where you can submit packages. The sysutils/gtk-send-pr
                   7135: package is also available as a substitute for either of the above two tools.
1.1       dsieger  7136: 
                   7137: In the form of the problem report, the category should be "pkg", the synopsis
                   7138: should include the package name and version number, and the description field
                   7139: should contain a short description of your package (contents of the COMMENT
1.25      wiz      7140: variable or DESCR file are OK). The uuencoded package data should go into the "
                   7141: fix" field.
1.1       dsieger  7142: 
                   7143: If you want to submit several packages, please send a separate PR for each one,
                   7144: it's easier for us to track things that way.
                   7145: 
                   7146: Alternatively, you can also import new packages into pkgsrc-wip ("pkgsrc
1.105     wiz      7147: work-in-progress"); see the homepage at http://pkgsrc.org/wip/ for details.
1.1       dsieger  7148: 
1.6       rillig   7149: 21.3. General notes when adding, updating, or removing packages
1.1       dsieger  7150: 
                   7151: Please note all package additions, updates, moves, and removals in pkgsrc/doc/
                   7152: CHANGES-YYYY. It's very important to keep this file up to date and conforming
                   7153: to the existing format, because it will be used by scripts to automatically
                   7154: update pages on www.NetBSD.org and other sites. Additionally, check the pkgsrc/
                   7155: doc/TODO file and remove the entry for the package you updated or removed, in
                   7156: case it was mentioned there.
                   7157: 
                   7158: When the PKGREVISION of a package is bumped, the change should appear in pkgsrc
                   7159: /doc/CHANGES-YYYY if it is security related or otherwise relevant. Mass bumps
                   7160: that result from a dependency being updated should not be mentioned. In all
                   7161: other cases it's the developer's decision.
                   7162: 
                   7163: There is a make target that helps in creating proper CHANGES-YYYY entries: make
                   7164: changes-entry. It uses the optional CTYPE and NETBSD_LOGIN_NAME variables. The
                   7165: general usage is to first make sure that your CHANGES-YYYY file is up-to-date
                   7166: (to avoid having to resolve conflicts later-on) and then to cd to the package
                   7167: directory. For package updates, make changes-entry is enough. For new packages,
                   7168: or package moves or removals, set the CTYPE variable on the command line to
1.4       rillig   7169: "Added", "Moved", or "Removed". You can set NETBSD_LOGIN_NAME in mk.conf if
1.23      jakllsch 7170: your local login name is not the same as your NetBSD login name. The target
                   7171: also automatically removes possibly existing entries for the package in the
                   7172: TODO file. Don't forget to commit the changes, e.g. by using make
1.66      asau     7173: commit-changes-entry! If you are not using a checkout directly from
1.23      jakllsch 7174: cvs.NetBSD.org, but e.g. a local copy of the repository, you can set
                   7175: USE_NETBSD_REPO=yes. This makes the cvs commands use the main repository.
1.1       dsieger  7176: 
1.34      wiz      7177: 21.4. Committing: Adding a package to CVS
1.1       dsieger  7178: 
                   7179: This section is only of interest for pkgsrc developers with write access to the
1.34      wiz      7180: pkgsrc repository.
                   7181: 
                   7182: When the package is finished, "cvs add" the files. Start by adding the
                   7183: directory and then files in the directory. Don't forget to add the new package
                   7184: to the category's Makefile. Make sure you don't forget any files; you can check
                   7185: by running "cvs status". An example:
                   7186: 
                   7187: $ cd .../pkgsrc/category
                   7188: $ cvs add pkgname
                   7189: $ cd pkgname
                   7190: $ cvs add DESCR Makefile PLIST distinfo buildlink3.mk patches
                   7191: $ cvs add patches/p*
                   7192: $ cvs status | less
1.35      wiz      7193: $ cvs commit
1.34      wiz      7194: $ cd ..
                   7195: $ vi Makefile # add SUBDIRS+=pkgname line
1.35      wiz      7196: $ cvs commit Makefile
1.66      asau     7197: $ cd pkgname
1.73      jnemeth  7198: $ make CTYPE=Added commit-changes-entry
1.1       dsieger  7199: 
                   7200: The commit message of the initial import should include part of the DESCR file,
                   7201: so people reading the mailing lists know what the package is/does.
                   7202: 
1.34      wiz      7203: Also mention the new package in pkgsrc/doc/CHANGES-20xx.
                   7204: 
                   7205: Previously, "cvs import" was suggested, but it was much easier to get wrong
                   7206: than "cvs add".
1.1       dsieger  7207: 
1.6       rillig   7208: 21.5. Updating a package to a newer version
1.1       dsieger  7209: 
                   7210: Please always put a concise, appropriate and relevant summary of the changes
                   7211: between old and new versions into the commit log when updating a package. There
                   7212: are various reasons for this:
                   7213: 
                   7214:   * A URL is volatile, and can change over time. It may go away completely or
                   7215:     its information may be overwritten by newer information.
                   7216: 
                   7217:   * Having the change information between old and new versions in our CVS
                   7218:     repository is very useful for people who use either cvs or anoncvs.
                   7219: 
                   7220:   * Having the change information between old and new versions in our CVS
                   7221:     repository is very useful for people who read the pkgsrc-changes mailing
                   7222:     list, so that they can make tactical decisions about when to upgrade the
                   7223:     package.
                   7224: 
                   7225: Please also recognize that, just because a new version of a package has been
                   7226: released, it should not automatically be upgraded in the CVS repository. We
                   7227: prefer to be conservative in the packages that are included in pkgsrc -
                   7228: development or beta packages are not really the best thing for most places in
                   7229: which pkgsrc is used. Please use your judgement about what should go into
                   7230: pkgsrc, and bear in mind that stability is to be preferred above new and
                   7231: possibly untested features.
                   7232: 
1.21      snj      7233: 21.6. Renaming a package in pkgsrc
                   7234: 
                   7235: Renaming packages is not recommended.
                   7236: 
                   7237: When renaming packages, be sure to fix any references to old name in other
                   7238: Makefiles, options, buildlink files, etc.
                   7239: 
                   7240: Also When renaming a package, please define SUPERSEDES to the package name and
                   7241: dewey version pattern(s) of the previous package name. This may be repeated for
                   7242: multiple renames. The new package would be an exact replacement.
                   7243: 
                   7244: Note that "successor" in the CHANGES-YYYY file doesn't necessarily mean that it
                   7245: supersedes, as that successor may not be an exact replacement but is a
                   7246: suggestion for the replaced functionality.
                   7247: 
                   7248: 21.7. Moving a package in pkgsrc
                   7249: 
                   7250: It is preferred that packages are not renamed or moved, but if needed please
                   7251: follow these steps.
1.1       dsieger  7252: 
                   7253:  1. Make a copy of the directory somewhere else.
                   7254: 
                   7255:  2. Remove all CVS dirs.
                   7256: 
                   7257:     Alternatively to the first two steps you can also do:
                   7258: 
                   7259:     % cvs -d user@cvs.NetBSD.org:/cvsroot export -D today pkgsrc/category/package
                   7260: 
                   7261:     and use that for further work.
                   7262: 
1.25      wiz      7263:  3. Fix CATEGORIES and any DEPENDS paths that just did "../package" instead of 
1.1       dsieger  7264:     "../../category/package".
                   7265: 
1.21      snj      7266:  4. In the modified package's Makefile, consider setting PREV_PKGPATH to the
                   7267:     previous category/package pathname. The PREV_PKGPATH can be used by tools
                   7268:     for doing an update using pkgsrc building; for example, it can search the
                   7269:     pkg_summary(5) database for PREV_PKGPATH (if no SUPERSEDES) and then use
                   7270:     the corresponding new PKGPATH for that moved package. Note that it may have
                   7271:     multiple matches, so the tool should also check on the PKGBASE too. The
                   7272:     PREV_PKGPATH probably has no value unless SUPERSEDES is not set, i.e.
                   7273:     PKGBASE stays the same.
                   7274: 
                   7275:  5. cvs import the modified package in the new place.
1.1       dsieger  7276: 
1.21      snj      7277:  6. Check if any package depends on it:
1.1       dsieger  7278: 
                   7279:     % cd /usr/pkgsrc
                   7280:     % grep /package */*/Makefile* */*/buildlink*
                   7281: 
1.21      snj      7282:  7. Fix paths in packages from step 5 to point to new location.
1.1       dsieger  7283: 
1.21      snj      7284:  8. cvs rm (-f) the package at the old location.
1.1       dsieger  7285: 
1.21      snj      7286:  9. Remove from oldcategory/Makefile.
1.1       dsieger  7287: 
1.21      snj      7288: 10. Add to newcategory/Makefile.
1.1       dsieger  7289: 
1.21      snj      7290: 11. Commit the changed and removed files:
1.1       dsieger  7291: 
                   7292:     % cvs commit oldcategory/package oldcategory/Makefile newcategory/Makefile
                   7293: 
                   7294:     (and any packages from step 5, of course).
                   7295: 
1.6       rillig   7296: Chapter 22. Frequently Asked Questions
1.1       dsieger  7297: 
                   7298: This section contains the answers to questions that may arise when you are
                   7299: writing a package. If you don't find your question answered here, first have a
                   7300: look in the other chapters, and if you still don't have the answer, ask on the
                   7301: pkgsrc-users mailing list.
                   7302: 
1.6       rillig   7303: 22.1. What is the difference between MAKEFLAGS, .MAKEFLAGS and MAKE_FLAGS?
                   7304: 22.2. What is the difference between MAKE, GMAKE and MAKE_PROGRAM?
                   7305: 22.3. What is the difference between CC, PKG_CC and PKGSRC_COMPILER?
                   7306: 22.4. What is the difference between BUILDLINK_LDFLAGS, BUILDLINK_LDADD and
1.1       dsieger  7307:     BUILDLINK_LIBS?
1.6       rillig   7308: 22.5. Why does make show-var VARNAME=BUILDLINK_PREFIX.foo say it's empty?
                   7309: 22.6. What does ${MASTER_SITE_SOURCEFORGE:=package/} mean? I don't understand
1.1       dsieger  7310:     the := inside it.
1.6       rillig   7311: 22.7. Which mailing lists are there for package developers?
                   7312: 22.8. Where is the pkgsrc documentation?
                   7313: 22.9. I have a little time to kill. What shall I do?
1.1       dsieger  7314: 
1.6       rillig   7315: 22.1. What is the difference between MAKEFLAGS, .MAKEFLAGS and MAKE_FLAGS?
1.1       dsieger  7316: 
                   7317:       MAKEFLAGS are the flags passed to the pkgsrc-internal invocations of make
                   7318:       (1), while MAKE_FLAGS are the flags that are passed to the MAKE_PROGRAM
                   7319:       when building the package. [FIXME: What is .MAKEFLAGS for?]
                   7320: 
1.6       rillig   7321: 22.2. What is the difference between MAKE, GMAKE and MAKE_PROGRAM?
1.1       dsieger  7322: 
                   7323:       MAKE is the path to the make(1) program that is used in the pkgsrc
                   7324:       infrastructure. GMAKE is the path to GNU Make, but you need to say
                   7325:       USE_TOOLS+=gmake to use that. MAKE_PROGRAM is the path to the Make
                   7326:       program that is used for building the package.
                   7327: 
1.6       rillig   7328: 22.3. What is the difference between CC, PKG_CC and PKGSRC_COMPILER?
1.1       dsieger  7329: 
                   7330:       CC is the path to the real C compiler, which can be configured by the
                   7331:       pkgsrc user. PKG_CC is the path to the compiler wrapper. PKGSRC_COMPILER
                   7332:       is not a path to a compiler, but the type of compiler that should be
                   7333:       used. See mk/compiler.mk for more information about the latter variable.
                   7334: 
1.6       rillig   7335: 22.4. What is the difference between BUILDLINK_LDFLAGS, BUILDLINK_LDADD and
1.1       dsieger  7336:       BUILDLINK_LIBS?
                   7337: 
                   7338:       [FIXME]
                   7339: 
1.6       rillig   7340: 22.5. Why does make show-var VARNAME=BUILDLINK_PREFIX.foo say it's empty?
1.1       dsieger  7341: 
1.25      wiz      7342:       For optimization reasons, some variables are only available in the "
                   7343:       wrapper" phase and later. To "simulate" the wrapper phase, append 
1.1       dsieger  7344:       PKG_PHASE=wrapper to the above command.
                   7345: 
1.6       rillig   7346: 22.6. What does ${MASTER_SITE_SOURCEFORGE:=package/} mean? I don't understand
1.1       dsieger  7347:       the := inside it.
                   7348: 
1.108     rillig   7349:       The := is not really an assignment operator, although it looks like it.
                   7350:       Instead, it is a degenerate form of ${LIST:old_string=new_string}, which
                   7351:       is documented in the make(1) man page and which is commonly used in the
                   7352:       form ${SRCS:.c=.o}. In the case of MASTER_SITE_*, old_string is the empty
                   7353:       string and new_string is package/. That's where the : and the = fall
                   7354:       together.
1.1       dsieger  7355: 
1.6       rillig   7356: 22.7. Which mailing lists are there for package developers?
1.1       dsieger  7357: 
                   7358:       tech-pkg
                   7359: 
                   7360:           This is a list for technical discussions related to pkgsrc
                   7361:           development, e.g. soliciting feedback for changes to pkgsrc
                   7362:           infrastructure, proposed new features, questions related to porting
                   7363:           pkgsrc to a new platform, advice for maintaining a package, patches
                   7364:           that affect many packages, help requests moved from pkgsrc-users when
                   7365:           an infrastructure bug is found, etc.
                   7366: 
                   7367:       pkgsrc-bugs
                   7368: 
                   7369:           All bug reports in category "pkg" sent with send-pr(1) appear here.
                   7370:           Please do not report your bugs here directly; use one of the other
                   7371:           mailing lists.
                   7372: 
1.6       rillig   7373: 22.8. Where is the pkgsrc documentation?
1.1       dsieger  7374: 
                   7375:       There are many places where you can find documentation about pkgsrc:
                   7376: 
                   7377:         * The pkgsrc guide (this document) is a collection of chapters that
                   7378:           explain large parts of pkgsrc, but some chapters tend to be outdated.
                   7379:           Which ones they are is hard to say.
                   7380: 
                   7381:         * On the mailing list archives (see http://mail-index.NetBSD.org/), you
                   7382:           can find discussions about certain features, announcements of new
                   7383:           parts of the pkgsrc infrastructure and sometimes even announcements
                   7384:           that a certain feature has been marked as obsolete. The benefit here
                   7385:           is that each message has a date appended to it.
                   7386: 
                   7387:         * Many of the files in the mk/ directory start with a comment that
                   7388:           describes the purpose of the file and how it can be used by the
                   7389:           pkgsrc user and package authors. An easy way to find this
                   7390:           documentation is to run bmake help.
                   7391: 
                   7392:         * The CVS log messages are a rich source of information, but they tend
                   7393:           to be highly abbreviated, especially for actions that occur often.
                   7394:           Some contain a detailed description of what has changed, but they are
                   7395:           geared towards the other pkgsrc developers, not towards an average
                   7396:           pkgsrc user. They also only document changes, so if you don't know
                   7397:           what has been before, these messages may not be worth too much to
                   7398:           you.
                   7399: 
                   7400:         * Some parts of pkgsrc are only "implicitly documented", that is the
                   7401:           documentation exists only in the mind of the developer who wrote the
                   7402:           code. To get this information, use the cvs annotate command to see
                   7403:           who has written it and ask on the tech-pkg mailing list, so that
                   7404:           others can find your questions later (see above). To be sure that the
                   7405:           developer in charge reads the mail, you may CC him or her.
                   7406: 
1.6       rillig   7407: 22.9. I have a little time to kill. What shall I do?
1.1       dsieger  7408: 
                   7409:       This is not really an FAQ yet, but here's the answer anyway.
                   7410: 
                   7411:         * Run pkg_chk -N (from the pkgtools/pkg_chk package). It will tell you
                   7412:           about newer versions of installed packages that are available, but
                   7413:           not yet updated in pkgsrc.
                   7414: 
                   7415:         * Browse pkgsrc/doc/TODO ? it contains a list of suggested new packages
                   7416:           and a list of cleanups and enhancements for pkgsrc that would be nice
                   7417:           to have.
                   7418: 
1.71      wiz      7419:         * Review packages for which review was requested on the tech-pkg
                   7420:           mailing list.
1.1       dsieger  7421: 
1.6       rillig   7422: Chapter 23. GNOME packaging and porting
1.1       dsieger  7423: 
                   7424: Table of Contents
                   7425: 
1.6       rillig   7426: 23.1. Meta packages
                   7427: 23.2. Packaging a GNOME application
                   7428: 23.3. Updating GNOME to a newer version
                   7429: 23.4. Patching guidelines
1.1       dsieger  7430: 
                   7431: Quoting GNOME's web site:
                   7432: 
                   7433:     The GNOME project provides two things: The GNOME desktop environment, an
                   7434:     intuitive and attractive desktop for users, and the GNOME development
                   7435:     platform, an extensive framework for building applications that integrate
                   7436:     into the rest of the desktop.
                   7437: 
                   7438: pkgsrc provides a seamless way to automatically build and install a complete
                   7439: GNOME environment under many different platforms. We can say with confidence
                   7440: that pkgsrc is one of the most advanced build and packaging systems for GNOME
                   7441: due to its included technologies buildlink3, the wrappers and tools framework
                   7442: and automatic configuration file management. Lots of efforts are put into
                   7443: achieving a completely clean deinstallation of installed software components.
                   7444: 
                   7445: Given that pkgsrc is NetBSD's official packaging system, the above also means
                   7446: that great efforts are put into making GNOME work under this operating system.
                   7447: Recently, DragonFly BSD also adopted pkgsrc as its preferred packaging system,
                   7448: contributing lots of portability fixes to make GNOME build and install under
                   7449: it.
                   7450: 
                   7451: This chapter is aimed at pkgsrc developers and other people interested in
                   7452: helping our GNOME porting and packaging efforts. It provides instructions on
                   7453: how to manage the existing packages and some important information regarding
                   7454: their internals.
                   7455: 
                   7456: We need your help!
                   7457: 
                   7458: Should you have some spare cycles to devote to NetBSD, pkgsrc and GNOME and are
                   7459: willing to learn new exciting stuff, please jump straight to the pending work
                   7460: list! There is still a long way to go to get a fully-functional GNOME desktop
                   7461: under NetBSD and we need your help to achieve it!
                   7462: 
1.6       rillig   7463: 23.1. Meta packages
1.1       dsieger  7464: 
                   7465: pkgsrc includes three GNOME-related meta packages:
                   7466: 
                   7467:   * meta-pkgs/gnome-base: Provides the core GNOME desktop environment. It only
                   7468:     includes the necessary bits to get it to boot correctly, although it may
                   7469:     lack important functionality for daily operation. The idea behind this
                   7470:     package is to let end users build their own configurations on top of this
                   7471:     one, first installing this meta package to achieve a functional setup and
                   7472:     then adding individual applications.
                   7473: 
                   7474:   * meta-pkgs/gnome: Provides a complete installation of the GNOME platform and
                   7475:     desktop as defined by the GNOME project; this is based on the components
                   7476:     distributed in the platform/x.y/x.y.z/sources and desktop/x.y/x.y.z/sources
                   7477:     directories of the official FTP server. Developer-only tools found in those
                   7478:     directories are not installed unless required by some other component to
                   7479:     work properly. Similarly, packages from the bindings set (bindings/x.y/
                   7480:     x.y.z/sources) are not pulled in unless required as a dependency for an
                   7481:     end-user component. This package "extends" meta-pkgs/gnome-base.
                   7482: 
                   7483:   * meta-pkgs/gnome-devel: Installs all the tools required to build a GNOME
                   7484:     component when fetched from the CVS repository. These are required to let
                   7485:     the autogen.sh scripts work appropriately.
                   7486: 
                   7487: In all these packages, the DEPENDS lines are sorted in a way that eases
                   7488: updates: a package may depend on other packages listed before it but not on any
1.25      wiz      7489: listed after it. It is very important to keep this order to ease updates so... 
1.1       dsieger  7490: do not change it to alphabetical sorting!
                   7491: 
1.6       rillig   7492: 23.2. Packaging a GNOME application
1.1       dsieger  7493: 
                   7494: Almost all GNOME applications are written in C and use a common set of tools as
                   7495: their build system. Things get different with the new bindings to other
                   7496: languages (such as Python), but the following will give you a general idea on
                   7497: the minimum required tools:
                   7498: 
                   7499:   * Almost all GNOME applications use the GNU Autotools as their build system.
                   7500:     As a general rule you will need to tell this to your package:
                   7501: 
                   7502:     GNU_CONFIGURE=yes
                   7503:     USE_LIBTOOL=yes
                   7504:     USE_TOOLS+=gmake
                   7505: 
                   7506:   * If the package uses pkg-config to detect dependencies, add this tool to the
                   7507:     list of required utilities:
                   7508: 
                   7509:     USE_TOOLS+=pkg-config
                   7510: 
                   7511:     Also use pkgtools/verifypc at the end of the build process to ensure that
                   7512:     you did not miss to specify any dependency in your package and that the
                   7513:     version requirements are all correct.
                   7514: 
                   7515:   * If the package uses intltool, be sure to add intltool to the USE_TOOLS to
                   7516:     handle dependencies and to force the package to use the latest available
                   7517:     version.
                   7518: 
                   7519:   * If the package uses gtk-doc (a documentation generation utility), do not
                   7520:     add a dependency on it. The tool is rather big and the distfile should come
                   7521:     with pregenerated documentation anyway; if it does not, it is a bug that
                   7522:     you ought to report. For such packages you should disable gtk-doc (unless
                   7523:     it is the default):
                   7524: 
                   7525:     CONFIGURE_ARGS+=--disable-gtk-doc
                   7526: 
                   7527:     The default location of installed HTML files (share/gtk-doc/<package-name>)
                   7528:     is correct and should not be changed unless the package insists on
                   7529:     installing them somewhere else. Otherwise programs as devhelp will not be
                   7530:     able to open them. You can do that with an entry similar to:
                   7531: 
                   7532:     CONFIGURE_ARGS+=--with-html-dir=${PREFIX}/share/gtk-doc/...
                   7533: 
                   7534: GNOME uses multiple shared directories and files under the installation prefix
                   7535: to maintain databases. In this context, shared means that those exact same
                   7536: directories and files are used among several different packages, leading to
                   7537: conflicts in the PLIST. pkgsrc currently includes functionality to handle the
                   7538: most common cases, so you have to forget about using @unexec ${RMDIR} lines in
                   7539: your file lists and omitting shared files from them. If you find yourself doing
                   7540: those, your package is most likely incorrect.
                   7541: 
                   7542: The following table lists the common situations that result in using shared
                   7543: directories or files. For each of them, the appropriate solution is given.
1.25      wiz      7544: After applying the solution be sure to regenerate the package's file list with 
1.1       dsieger  7545: make print-PLIST and ensure it is correct.
                   7546: 
1.6       rillig   7547: Table 23.1. PLIST handling for GNOME packages
1.1       dsieger  7548: 
                   7549: +-----------------------------------------------------------------------------+
                   7550: |             If the package...             |             Then...             |
                   7551: |-------------------------------------------+---------------------------------|
1.6       rillig   7552: |                                           |See Section 19.6.10, "Packages   |
1.18      mishka   7553: |Installs OMF files under share/omf.        |installing scrollkeeper/rarian   |
                   7554: |                                           |data files".                     |
1.1       dsieger  7555: |-------------------------------------------+---------------------------------|
1.6       rillig   7556: |Installs icons under the share/icons/      |See Section 19.6.19, "Packages   |
1.1       dsieger  7557: |hicolor hierarchy or updates share/icons/  |installing hicolor theme icons". |
                   7558: |hicolor/icon-theme.cache.                  |                                 |
                   7559: |-------------------------------------------+---------------------------------|
1.6       rillig   7560: |                                           |See Section 19.6.14, "Packages   |
1.1       dsieger  7561: |Installs files under share/mime/packages.  |installing extensions to the MIME|
                   7562: |                                           |database".                       |
                   7563: |-------------------------------------------+---------------------------------|
1.6       rillig   7564: |Installs .desktop files under share/       |See Section 19.6.20, "Packages   |
1.1       dsieger  7565: |applications and these include MIME        |installing desktop files".       |
                   7566: |information.                               |                                 |
                   7567: +-----------------------------------------------------------------------------+
                   7568: 
                   7569: 
1.6       rillig   7570: 23.3. Updating GNOME to a newer version
1.1       dsieger  7571: 
                   7572: When seeing GNOME as a whole, there are two kinds of updates:
                   7573: 
                   7574: Major update
                   7575: 
                   7576:     Given that there is still a very long way for GNOME 3 (if it ever appears),
                   7577:     we consider a major update one that goes from a 2.X version to a 2.Y one,
                   7578:     where Y is even and greater than X. These are hard to achieve because they
                   7579:     introduce lots of changes in the components' code and almost all GNOME
                   7580:     distfiles are updated to newer versions. Some of them can even break API
                   7581:     and ABI compatibility with the previous major version series. As a result,
                   7582:     the update needs to be done all at once to minimize breakage.
                   7583: 
                   7584:     A major update typically consists of around 80 package updates and the
                   7585:     addition of some new ones.
                   7586: 
                   7587: Minor update
                   7588: 
                   7589:     We consider a minor update one that goes from a 2.A.X version to a 2.A.Y
                   7590:     one where Y is greater than X. These are easy to achieve because they do
                   7591:     not update all GNOME components, can be done in an incremental way and do
                   7592:     not break API nor ABI compatibility.
                   7593: 
                   7594:     A minor update typically consists of around 50 package updates, although
                   7595:     the numbers here may vary a lot.
                   7596: 
                   7597: In order to update the GNOME components in pkgsrc to a new stable release
                   7598: (either major or minor), the following steps should be followed:
                   7599: 
                   7600:  1. Get a list of all the tarballs that form the new release by using the
1.19      snj      7601:     following commands. These will leave the full list of the components'
1.1       dsieger  7602:     distfiles into the list.txt file:
                   7603: 
                   7604:     % echo ls "*.tar.bz2" | \
                   7605:         ftp -V ftp://ftp.gnome.org/pub/gnome/platform/x.y/x.y.z/sources/ | \
                   7606:         awk '{ print $9 }' >list.txt
                   7607:     % echo ls "*.tar.bz2" | \
                   7608:         ftp -V ftp://ftp.gnome.org/pub/gnome/desktop/x.y/x.y.z/sources/ | \
                   7609:         awk '{ print $9 }' >>list.txt
                   7610: 
                   7611:  2. Open each meta package's Makefile and bump their version to the release you
                   7612:     are updating them to. The three meta packages should be always consistent
                   7613:     with versioning. Obviously remove any PKGREVISIONs that might be in them.
                   7614: 
                   7615:  3. For each meta package, update all its DEPENDS lines to match the latest
                   7616:     versions as shown by the above commands. Do not list any newer version
                   7617:     (even if found in the FTP) because the meta packages are supposed to list
                   7618:     the exact versions that form a specific GNOME release. Exceptions are
                   7619:     permitted here if a newer version solves a serious issue in the overall
                   7620:     desktop experience; these typically come in the form of a revision bump in
                   7621:     pkgsrc, not in newer versions from the developers.
                   7622: 
                   7623:     Packages not listed in the list.txt file should be updated to the latest
                   7624:     version available (if found in pkgsrc). This is the case, for example, of
                   7625:     the dependencies on the GNU Autotools in the meta-pkgs/gnome-devel meta
                   7626:     package.
                   7627: 
                   7628:  4. Generate a patch from the modified meta packages and extract the list of
                   7629:     "new" lines. This will provide you an outline on what packages need to be
                   7630:     updated in pkgsrc and in what order:
                   7631: 
                   7632:     % cvs diff -u gnome-devel gnome-base gnome | grep '^+D' >todo.txt
                   7633: 
                   7634:  5. For major desktop updates it is recommended to zap all your installed
                   7635:     packages and start over from scratch at this point.
                   7636: 
                   7637:  6. Now comes the longest step by far: iterate over the contents of todo.txt
                   7638:     and update the packages listed in it in order. For major desktop updates
                   7639:     none of these should be committed until the entire set is completed because
                   7640:     there are chances of breaking not-yet-updated packages.
                   7641: 
                   7642:  7. Once the packages are up to date and working, commit them to the tree one
                   7643:     by one with appropriate log messages. At the end, commit the three meta
                   7644:     package updates and all the corresponding changes to the doc/CHANGES-<YEAR>
                   7645:     and pkgsrc/doc/TODO files.
                   7646: 
1.6       rillig   7647: 23.4. Patching guidelines
1.1       dsieger  7648: 
                   7649: GNOME is a very big component in pkgsrc which approaches 100 packages. Please,
                   7650: it is very important that you always, always, always feed back any portability
                   7651: fixes you do to a GNOME package to the mainstream developers (see
1.6       rillig   7652: Section 11.3.5, "Feedback to the author"). This is the only way to get their
1.1       dsieger  7653: attention on portability issues and to ensure that future versions can be built
                   7654: out-of-the box on NetBSD. The less custom patches in pkgsrc, the easier further
                   7655: updates are. Those developers in charge of issuing major GNOME updates will be
                   7656: grateful if you do that.
                   7657: 
                   7658: The most common places to report bugs are the GNOME's Bugzilla and the
                   7659: freedesktop.org's Bugzilla. Not all components use these to track bugs, but
                   7660: most of them do. Do not be short on your reports: always provide detailed
                   7661: explanations of the current failure, how it can be improved to achieve maximum
                   7662: portability and, if at all possible, provide a patch against CVS head. The more
                   7663: verbose you are, the higher chances of your patch being accepted.
                   7664: 
                   7665: Also, please avoid using preprocessor magic to fix portability issues. While
                   7666: the FreeBSD GNOME people are doing a great job in porting GNOME to their
                   7667: operating system, the official GNOME sources are now plagued by conditionals
                   7668: that check for __FreeBSD__ and similar macros. This hurts portability. Please
1.6       rillig   7669: see our patching guidelines (Section 11.3.4, "Patching guidelines") for more
1.1       dsieger  7670: details.
                   7671: 
                   7672: Part III. The pkgsrc infrastructure internals
                   7673: 
                   7674: This part of the guide deals with everything from the infrastructure that is
                   7675: behind the interfaces described in the developer's guide. A casual package
                   7676: maintainer should not need anything from this part.
                   7677: 
                   7678: Table of Contents
                   7679: 
1.6       rillig   7680: 24. Design of the pkgsrc infrastructure
1.1       dsieger  7681: 
1.6       rillig   7682:     24.1. The meaning of variable definitions
                   7683:     24.2. Avoiding problems before they arise
                   7684:     24.3. Variable evaluation
1.1       dsieger  7685: 
1.6       rillig   7686:         24.3.1. At load time
                   7687:         24.3.2. At runtime
1.1       dsieger  7688: 
1.6       rillig   7689:     24.4. How can variables be specified?
                   7690:     24.5. Designing interfaces for Makefile fragments
1.1       dsieger  7691: 
1.6       rillig   7692:         24.5.1. Procedures with parameters
                   7693:         24.5.2. Actions taken on behalf of parameters
1.1       dsieger  7694: 
1.6       rillig   7695:     24.6. The order in which files are loaded
1.1       dsieger  7696: 
1.6       rillig   7697:         24.6.1. The order in bsd.prefs.mk
                   7698:         24.6.2. The order in bsd.pkg.mk
1.1       dsieger  7699: 
1.6       rillig   7700: 25. Regression tests
1.1       dsieger  7701: 
1.108     rillig   7702:     25.1. Running the regression tests
                   7703:     25.2. Adding a new regression test
1.1       dsieger  7704: 
1.108     rillig   7705:         25.2.1. Overridable functions
                   7706:         25.2.2. Helper functions
1.1       dsieger  7707: 
1.6       rillig   7708: 26. Porting pkgsrc
1.1       dsieger  7709: 
1.6       rillig   7710:     26.1. Porting pkgsrc to a new operating system
1.1       dsieger  7711: 
1.6       rillig   7712: Chapter 24. Design of the pkgsrc infrastructure
1.1       dsieger  7713: 
                   7714: Table of Contents
                   7715: 
1.6       rillig   7716: 24.1. The meaning of variable definitions
                   7717: 24.2. Avoiding problems before they arise
                   7718: 24.3. Variable evaluation
1.1       dsieger  7719: 
1.6       rillig   7720:     24.3.1. At load time
                   7721:     24.3.2. At runtime
1.1       dsieger  7722: 
1.6       rillig   7723: 24.4. How can variables be specified?
                   7724: 24.5. Designing interfaces for Makefile fragments
1.1       dsieger  7725: 
1.6       rillig   7726:     24.5.1. Procedures with parameters
                   7727:     24.5.2. Actions taken on behalf of parameters
1.1       dsieger  7728: 
1.6       rillig   7729: 24.6. The order in which files are loaded
1.1       dsieger  7730: 
1.6       rillig   7731:     24.6.1. The order in bsd.prefs.mk
                   7732:     24.6.2. The order in bsd.pkg.mk
1.1       dsieger  7733: 
                   7734: The pkgsrc infrastructure consists of many small Makefile fragments. Each such
                   7735: fragment needs a properly specified interface. This chapter explains how such
                   7736: an interface looks like.
                   7737: 
1.6       rillig   7738: 24.1. The meaning of variable definitions
1.1       dsieger  7739: 
                   7740: Whenever a variable is defined in the pkgsrc infrastructure, the location and
                   7741: the way of definition provide much information about the intended use of that
                   7742: variable. Additionally, more documentation may be found in a header comment or
                   7743: in this pkgsrc guide.
                   7744: 
                   7745: A special file is mk/defaults/mk.conf, which lists all variables that are
                   7746: intended to be user-defined. They are either defined using the ?= operator or
                   7747: they are left undefined because defining them to anything would effectively
                   7748: mean "yes". All these variables may be overridden by the pkgsrc user in the
                   7749: MAKECONF file.
                   7750: 
                   7751: Outside this file, the following conventions apply: Variables that are defined
                   7752: using the ?= operator may be overridden by a package.
                   7753: 
                   7754: Variables that are defined using the = operator may be used read-only at
                   7755: run-time.
                   7756: 
                   7757: Variables whose name starts with an underscore must not be accessed outside the
                   7758: pkgsrc infrastructure at all. They may change without further notice.
                   7759: 
                   7760: Note
                   7761: 
                   7762: These conventions are currently not applied consistently to the complete pkgsrc
                   7763: infrastructure.
                   7764: 
1.6       rillig   7765: 24.2. Avoiding problems before they arise
1.1       dsieger  7766: 
                   7767: All variables that contain lists of things should default to being empty. Two
                   7768: examples that do not follow this rule are USE_LANGUAGES and DISTFILES. These
                   7769: variables cannot simply be modified using the += operator in package Makefiles
                   7770: (or other files included by them), since there is no guarantee whether the
                   7771: variable is already set or not, and what its value is. In the case of
                   7772: DISTFILES, the packages "know" the default value and just define it as in the
                   7773: following example.
                   7774: 
                   7775: DISTFILES=      ${DISTNAME}${EXTRACT_SUFX} additional-files.tar.gz
                   7776: 
                   7777: Because of the selection of this default value, the same value appears in many
                   7778: package Makefiles. Similarly for USE_LANGUAGES, but in this case the default
                   7779: value ("c") is so short that it doesn't stand out. Nevertheless it is mentioned
                   7780: in many files.
                   7781: 
1.6       rillig   7782: 24.3. Variable evaluation
1.1       dsieger  7783: 
1.6       rillig   7784: 24.3.1. At load time
1.1       dsieger  7785: 
                   7786: Variable evaluation takes place either at load time or at runtime, depending on
                   7787: the context in which they occur. The contexts where variables are evaluated at
                   7788: load time are:
                   7789: 
                   7790:   * The right hand side of the := and != operators,
                   7791: 
                   7792:   * Make directives like .if or .for,
                   7793: 
                   7794:   * Dependency lines.
                   7795: 
                   7796: A special exception are references to the iteration variables of .for loops,
                   7797: which are expanded inline, no matter in which context they appear.
                   7798: 
                   7799: As the values of variables may change during load time, care must be taken not
                   7800: to evaluate them by accident. Typical examples for variables that should not be
                   7801: evaluated at load time are DEPENDS and CONFIGURE_ARGS. To make the effect more
                   7802: clear, here is an example:
                   7803: 
                   7804: CONFIGURE_ARGS=         # none
                   7805: CFLAGS=                 -O
                   7806: CONFIGURE_ARGS+=        CFLAGS=${CFLAGS:Q}
                   7807: 
                   7808: CONFIGURE_ARGS:=        ${CONFIGURE_ARGS}
                   7809: 
                   7810: CFLAGS+=                -Wall
                   7811: 
                   7812: This code shows how the use of the := operator can quickly lead to unexpected
                   7813: results. The first paragraph is fairly common code. The second paragraph
                   7814: evaluates the CONFIGURE_ARGS variable, which results in CFLAGS=-O. In the third
                   7815: paragraph, the -Wall is appended to the CFLAGS, but this addition will not
                   7816: appear in CONFIGURE_ARGS. In actual code, the three paragraphs from above
                   7817: typically occur in completely unrelated files.
                   7818: 
1.6       rillig   7819: 24.3.2. At runtime
1.1       dsieger  7820: 
                   7821: After all the files have been loaded, the values of the variables cannot be
                   7822: changed anymore. Variables that are used in the shell commands are expanded at
                   7823: this point.
                   7824: 
1.6       rillig   7825: 24.4. How can variables be specified?
1.1       dsieger  7826: 
                   7827: There are many ways in which the definition and use of a variable can be
                   7828: restricted in order to detect bugs and violations of the (mostly unwritten)
1.108     rillig   7829: policies. A package can be checked with pkglint -Wall to see whether it meets
                   7830: these rules.
1.1       dsieger  7831: 
1.6       rillig   7832: 24.5. Designing interfaces for Makefile fragments
1.1       dsieger  7833: 
                   7834: Most of the .mk files fall into one of the following classes. Cases where a
                   7835: file falls into more than one class should be avoided as it often leads to
                   7836: subtle bugs.
                   7837: 
1.6       rillig   7838: 24.5.1. Procedures with parameters
1.1       dsieger  7839: 
                   7840: In a traditional imperative programming language some of the .mk files could be
1.23      jakllsch 7841: described as procedures. They take some input parameters and?after
                   7842: inclusion?provide a result in output parameters. Since all variables in
                   7843: Makefiles have global scope care must be taken not to use parameter names that
                   7844: have already another meaning. For example, PKGNAME is a bad choice for a
                   7845: parameter name.
1.1       dsieger  7846: 
                   7847: Procedures are completely evaluated at preprocessing time. That is, when
                   7848: calling a procedure all input parameters must be completely resolvable. For
                   7849: example, CONFIGURE_ARGS should never be an input parameter since it is very
                   7850: likely that further text will be added after calling the procedure, which would
                   7851: effectively apply the procedure to only a part of the variable. Also,
1.108     rillig   7852: references to other variables will be modified after calling the procedure.
1.1       dsieger  7853: 
                   7854: A procedure can declare its output parameters either as suitable for use in
                   7855: preprocessing directives or as only available at runtime. The latter
                   7856: alternative is for variables that contain references to other runtime
                   7857: variables.
                   7858: 
                   7859: Procedures shall be written such that it is possible to call the procedure more
                   7860: than once. That is, the file must not contain multiple-inclusion guards.
                   7861: 
                   7862: Examples for procedures are mk/bsd.options.mk and mk/buildlink3/bsd.builtin.mk.
                   7863: To express that the parameters are evaluated at load time, they should be
                   7864: assigned using the := operator, which should be used only for this purpose.
                   7865: 
1.6       rillig   7866: 24.5.2. Actions taken on behalf of parameters
1.1       dsieger  7867: 
                   7868: Action files take some input parameters and may define runtime variables. They
                   7869: shall not define loadtime variables. There are action files that are included
                   7870: implicitly by the pkgsrc infrastructure, while other must be included
                   7871: explicitly.
                   7872: 
                   7873: An example for action files is mk/subst.mk.
                   7874: 
1.6       rillig   7875: 24.6. The order in which files are loaded
1.1       dsieger  7876: 
                   7877: Package Makefiles usually consist of a set of variable definitions, and include
                   7878: the file ../../mk/bsd.pkg.mk in the very last line. Before that, they may also
                   7879: include various other *.mk files if they need to query the availability of
                   7880: certain features like the type of compiler or the X11 implementation. Due to
                   7881: the heavy use of preprocessor directives like .if and .for, the order in which
                   7882: the files are loaded matters.
                   7883: 
                   7884: This section describes at which point the various files are loaded and gives
                   7885: reasons for that order.
                   7886: 
1.6       rillig   7887: 24.6.1. The order in bsd.prefs.mk
1.1       dsieger  7888: 
                   7889: The very first action in bsd.prefs.mk is to define some essential variables
                   7890: like OPSYS, OS_VERSION and MACHINE_ARCH.
                   7891: 
1.4       rillig   7892: Then, the user settings are loaded from the file specified in MAKECONF, which
                   7893: is usually mk.conf. After that, those variables that have not been overridden
                   7894: by the user are loaded from mk/defaults/mk.conf.
1.1       dsieger  7895: 
                   7896: After the user settings, the system settings and platform settings are loaded,
                   7897: which may override the user settings.
                   7898: 
                   7899: Then, the tool definitions are loaded. The tool wrappers are not yet in effect.
                   7900: This only happens when building a package, so the proper variables must be used
                   7901: instead of the direct tool names.
                   7902: 
                   7903: As the last steps, some essential variables from the wrapper and the package
                   7904: system flavor are loaded, as well as the variables that have been cached in
                   7905: earlier phases of a package build.
                   7906: 
1.6       rillig   7907: 24.6.2. The order in bsd.pkg.mk
1.1       dsieger  7908: 
                   7909: First, bsd.prefs.mk is loaded.
                   7910: 
                   7911: Then, the various *-vars.mk files are loaded, which fill default values for
                   7912: those variables that have not been defined by the package. These variables may
                   7913: later be used even in unrelated files.
                   7914: 
                   7915: Then, the file bsd.pkg.error.mk provides the target error-check that is added
                   7916: as a special dependency to all other targets that use DELAYED_ERROR_MSG or
                   7917: DELAYED_WARNING_MSG.
                   7918: 
                   7919: Then, the package-specific hacks from hacks.mk are included.
                   7920: 
                   7921: Then, various other files follow. Most of them don't have any dependencies on
                   7922: what they need to have included before or after them, though some do.
                   7923: 
                   7924: The code to check PKG_FAIL_REASON and PKG_SKIP_REASON is then executed, which
                   7925: restricts the use of these variables to all the files that have been included
                   7926: before. Appearances in later files will be silently ignored.
                   7927: 
                   7928: Then, the files for the main targets are included, in the order of later
                   7929: execution, though the actual order should not matter.
                   7930: 
                   7931: At last, some more files are included that don't set any interesting variables
                   7932: but rather just define make targets to be executed.
                   7933: 
1.6       rillig   7934: Chapter 25. Regression tests
1.1       dsieger  7935: 
                   7936: Table of Contents
                   7937: 
1.108     rillig   7938: 25.1. Running the regression tests
                   7939: 25.2. Adding a new regression test
1.1       dsieger  7940: 
1.108     rillig   7941:     25.2.1. Overridable functions
                   7942:     25.2.2. Helper functions
1.1       dsieger  7943: 
                   7944: The pkgsrc infrastructure consists of a large codebase, and there are many
                   7945: corners where every little bit of a file is well thought out, making pkgsrc
                   7946: likely to fail as soon as anything is changed near those parts. To prevent most
                   7947: changes from breaking anything, a suite of regression tests should go along
                   7948: with every important part of the pkgsrc infrastructure. This chapter describes
                   7949: how regression tests work in pkgsrc and how you can add new tests.
                   7950: 
1.108     rillig   7951: 25.1. Running the regression tests
1.1       dsieger  7952: 
1.25      wiz      7953: You first need to install the pkgtools/pkg_regress package, which provides the 
1.1       dsieger  7954: pkg_regress command. Then you can simply run that command, which will run all
                   7955: tests in the regress category.
                   7956: 
1.108     rillig   7957: 25.2. Adding a new regression test
1.1       dsieger  7958: 
                   7959: Every directory in the regress category that contains a file called spec is
                   7960: considered a regression test. This file is a shell program that is included by
                   7961: the pkg_regress command. The following functions can be overridden to suit your
                   7962: needs.
                   7963: 
1.108     rillig   7964: 25.2.1. Overridable functions
1.1       dsieger  7965: 
1.108     rillig   7966: These functions do not take any parameters. Although they are called in "set -e
                   7967: " mode, they don't stop at the first failing command. See this StackOverflow
                   7968: question for details.
1.1       dsieger  7969: 
1.108     rillig   7970: do_setup
1.1       dsieger  7971: 
                   7972:     This function prepares the environment for the test. By default it does
                   7973:     nothing.
                   7974: 
1.108     rillig   7975: do_test
1.1       dsieger  7976: 
                   7977:     This function runs the actual test. By default, it calls TEST_MAKE with the
                   7978:     arguments MAKEARGS_TEST and writes its output including error messages into
                   7979:     the file TEST_OUTFILE.
                   7980: 
1.108     rillig   7981:     When defining this function, make sure that all output that needs to be
                   7982:     checked is written to the correct output file. Example:
                   7983: 
                   7984:     do_test() {
                   7985:             echo "Example output"
                   7986:     } 1>$TEST_OUTFILE 2>&1
                   7987: 
                   7988: check_result
1.1       dsieger  7989: 
                   7990:     This function is run after the test and is typically used to compare the
                   7991:     actual output from the one that is expected. It can make use of the various
1.108     rillig   7992:     helper functions from the next section. Example:
                   7993: 
                   7994:     check_result() {
                   7995:             exit_status 0
                   7996:             output_require "Example"
                   7997:             output_require "^[[:alpha:]+[[:space:]][[:alpha:]]{6}$"
                   7998:             output_prohibit "no such file or directory"
                   7999:     }
1.1       dsieger  8000: 
1.108     rillig   8001: do_cleanup
1.1       dsieger  8002: 
                   8003:     This function cleans everything up after the test has been run. By default
                   8004:     it does nothing.
                   8005: 
1.108     rillig   8006: 25.2.2. Helper functions
1.1       dsieger  8007: 
1.108     rillig   8008: exit_status expected
1.1       dsieger  8009: 
1.108     rillig   8010:     This function compares the exitcode of the do_test function with its first
                   8011:     parameter. If they differ, the test will fail.
1.1       dsieger  8012: 
1.108     rillig   8013: output_require regex...
1.1       dsieger  8014: 
                   8015:     This function checks for each of its parameters if the output from do_test
1.108     rillig   8016:     matches the extended regular expression. If it does not, the test will
                   8017:     fail. Example:
                   8018: 
                   8019:     output_require "looks fine"
                   8020:     output_require "^[[:alpha:]+[[:space:]][[:alpha:]]{6}$"
1.1       dsieger  8021: 
                   8022: output_prohibit(regex...)
                   8023: 
                   8024:     This function checks for each of its parameters if the output from do_test
                   8025:     () does not match the extended regular expression. If any of the regular
                   8026:     expressions matches, the test will fail.
                   8027: 
1.6       rillig   8028: Chapter 26. Porting pkgsrc
1.1       dsieger  8029: 
                   8030: Table of Contents
                   8031: 
1.6       rillig   8032: 26.1. Porting pkgsrc to a new operating system
1.1       dsieger  8033: 
                   8034: The pkgsrc system has already been ported to many operating systems, hardware
                   8035: architectures and compilers. This chapter explains the necessary steps to make
                   8036: pkgsrc even more portable.
                   8037: 
1.6       rillig   8038: 26.1. Porting pkgsrc to a new operating system
1.1       dsieger  8039: 
                   8040: To port pkgsrc to a new operating system (called MyOS in this example), you
                   8041: need to touch the following files:
                   8042: 
                   8043: pkgtools/bootstrap-mk-files/files/mods/MyOS.sys.mk
                   8044: 
                   8045:     This file contains some basic definitions, for example the name of the C
                   8046:     compiler.
                   8047: 
                   8048: mk/bsd.prefs.mk
                   8049: 
                   8050:     Insert code that defines the variables OPSYS, OS_VERSION, LOWER_OS_VERSION,
                   8051:     LOWER_VENDOR, MACHINE_ARCH, OBJECT_FMT, APPEND_ELF, and the other variables
                   8052:     that appear in this file.
                   8053: 
                   8054: mk/platform/MyOS.mk
                   8055: 
                   8056:     This file contains the platform-specific definitions that are used by
                   8057:     pkgsrc. Start by copying one of the other files and edit it to your needs.
                   8058: 
                   8059: mk/tools/tools.MyOS.mk
                   8060: 
                   8061:     This file defines the paths to all the tools that are needed by one or the
                   8062:     other package in pkgsrc, as well as by pkgsrc itself. Find out where these
                   8063:     tools are on your platform and add them.
                   8064: 
                   8065: Now, you should be able to build some basic packages, like lang/perl5, shells/
                   8066: bash.
                   8067: 
                   8068: Appendix A. A simple example package: bison
                   8069: 
                   8070: Table of Contents
                   8071: 
                   8072: A.1. files
                   8073: 
                   8074:     A.1.1. Makefile
                   8075:     A.1.2. DESCR
                   8076:     A.1.3. PLIST
                   8077:     A.1.4. Checking a package with pkglint
                   8078: 
                   8079: A.2. Steps for building, installing, packaging
                   8080: 
                   8081: We checked to find a piece of software that wasn't in the packages collection,
1.25      wiz      8082: and picked GNU bison. Quite why someone would want to have bison when Berkeley 
1.1       dsieger  8083: yacc is already present in the tree is beyond us, but it's useful for the
                   8084: purposes of this exercise.
                   8085: 
                   8086: A.1. files
                   8087: 
                   8088: A.1.1. Makefile
                   8089: 
1.2       rillig   8090: # $NetBSD$
1.1       dsieger  8091: #
                   8092: 
                   8093: DISTNAME=       bison-1.25
                   8094: CATEGORIES=     devel
                   8095: MASTER_SITES=   ${MASTER_SITE_GNU}
                   8096: 
1.30      dholland 8097: MAINTAINER=     pkgsrc-users@NetBSD.org
1.1       dsieger  8098: HOMEPAGE=       http://www.gnu.org/software/bison/bison.html
                   8099: COMMENT=        GNU yacc clone
                   8100: 
                   8101: GNU_CONFIGURE=  yes
1.47      wiz      8102: INFO_FILES=     yes
1.1       dsieger  8103: 
                   8104: .include "../../mk/bsd.pkg.mk"
                   8105: 
                   8106: A.1.2. DESCR
                   8107: 
                   8108: GNU version of yacc.  Can make re-entrant parsers, and numerous other
                   8109: improvements.  Why you would want this when Berkeley yacc(1) is part
                   8110: of the NetBSD source tree is beyond me.
                   8111: 
                   8112: A.1.3. PLIST
                   8113: 
1.2       rillig   8114: @comment $NetBSD$
1.1       dsieger  8115: bin/bison
                   8116: man/man1/bison.1.gz
                   8117: share/bison.simple
                   8118: share/bison.hairy
                   8119: 
                   8120: A.1.4. Checking a package with pkglint
                   8121: 
                   8122: The NetBSD package system comes with pkgtools/pkglint which helps to check the
                   8123: contents of these files. After installation it is quite easy to use, just
                   8124: change to the directory of the package you wish to examine and execute pkglint:
                   8125: 
                   8126: $ pkglint
                   8127: looks fine.
                   8128: 
                   8129: Depending on the supplied command line arguments (see pkglint(1)), more checks
                   8130: will be performed. Use e.g. pkglint -Call -Wall for a very thorough check.
                   8131: 
                   8132: A.2. Steps for building, installing, packaging
                   8133: 
                   8134: Create the directory where the package lives, plus any auxiliary directories:
                   8135: 
                   8136: # cd /usr/pkgsrc/lang
                   8137: # mkdir bison
                   8138: # cd bison
                   8139: # mkdir patches
                   8140: 
1.6       rillig   8141: Create Makefile, DESCR and PLIST (see Chapter 11, Package components - files,
1.1       dsieger  8142: directories and contents) then continue with fetching the distfile:
                   8143: 
                   8144: # make fetch
                   8145: >> bison-1.25.tar.gz doesn't seem to exist on this system.
                   8146: >> Attempting to fetch from ftp://prep.ai.mit.edu/pub/gnu//.
                   8147: Requesting ftp://prep.ai.mit.edu/pub/gnu//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/)
                   8148: ftp: Error retrieving file: 500 Internal error
                   8149: 
                   8150: >> Attempting to fetch from ftp://wuarchive.wustl.edu/systems/gnu//.
                   8151: Requesting ftp://wuarchive.wustl.edu/systems/gnu//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/)
                   8152: ftp: Error retrieving file: 500 Internal error
                   8153: 
                   8154: >> Attempting to fetch from ftp://ftp.freebsd.org/pub/FreeBSD/distfiles//.
                   8155: Requesting ftp://ftp.freebsd.org/pub/FreeBSD/distfiles//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/)
                   8156: Successfully retrieved file.
                   8157: 
                   8158: Generate the checksum of the distfile into distinfo:
                   8159: 
                   8160: # make makedistinfo
                   8161: 
                   8162: Now compile:
                   8163: 
                   8164: # make
                   8165: >> Checksum OK for bison-1.25.tar.gz.
                   8166: ===>  Extracting for bison-1.25
                   8167: ===>  Patching for bison-1.25
                   8168: ===>   Ignoring empty patch directory
                   8169: ===>  Configuring for bison-1.25
                   8170: creating cache ./config.cache
                   8171: checking for gcc... cc
                   8172: checking whether we are using GNU C... yes
                   8173: checking for a BSD compatible install... /usr/bin/install -c -o bin -g bin
                   8174: checking how to run the C preprocessor... cc -E
                   8175: checking for minix/config.h... no
                   8176: checking for POSIXized ISC... no
                   8177: checking whether cross-compiling... no
                   8178: checking for ANSI C header files... yes
                   8179: checking for string.h... yes
                   8180: checking for stdlib.h... yes
                   8181: checking for memory.h... yes
                   8182: checking for working const... yes
                   8183: checking for working alloca.h... no
                   8184: checking for alloca... yes
                   8185: checking for strerror... yes
                   8186: updating cache ./config.cache
                   8187: creating ./config.status
                   8188: creating Makefile
                   8189: ===>  Building for bison-1.25
                   8190: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g LR0.c
                   8191: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g allocate.c
                   8192: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g closure.c
                   8193: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g conflicts.c
                   8194: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g derives.c
                   8195: cc -c -DXPFILE=\"/usr/pkg/share/bison.simple\"  -DXPFILE1=\"/usr/pkg/share/bison.hairy\" -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1  -g  ./files.c
                   8196: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g getargs.c
                   8197: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g gram.c
                   8198: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g lalr.c
                   8199: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g lex.c
                   8200: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g main.c
                   8201: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g nullable.c
                   8202: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g output.c
                   8203: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g print.c
                   8204: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g reader.c
                   8205: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g reduce.c
                   8206: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g symtab.c
                   8207: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g warshall.c
                   8208: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g version.c
                   8209: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g getopt.c
                   8210: cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include  -g getopt1.c
                   8211: cc  -g -o bison LR0.o allocate.o closure.o conflicts.o derives.o files.o         getargs.o gram.o lalr.o lex.o                                   main.o nullable.o output.o print.o reader.o reduce.o symtab.o   warshall.o version.o getopt.o getopt1.o
                   8212: ./files.c:240: warning: mktemp() possibly used unsafely, consider using mkstemp()
                   8213: rm -f bison.s1
                   8214: sed -e "/^#line/ s|bison|/usr/pkg/share/bison|" < ./bison.simple > bison.s1
                   8215: 
                   8216: Everything seems OK, so install the files:
                   8217: 
                   8218: # make install
                   8219: >> Checksum OK for bison-1.25.tar.gz.
                   8220: ===>  Installing for bison-1.25
                   8221: sh ./mkinstalldirs /usr/pkg/bin /usr/pkg/share  /usr/pkg/info /usr/pkg/man/man1
                   8222: rm -f /usr/pkg/bin/bison
                   8223: cd /usr/pkg/share; rm -f bison.simple bison.hairy
                   8224: rm -f /usr/pkg/man/man1/bison.1 /usr/pkg/info/bison.info*
                   8225: install -c  -o bin -g bin -m 555 bison /usr/pkg/bin/bison
                   8226: /usr/bin/install -c -o bin -g bin -m 644 bison.s1 /usr/pkg/share/bison.simple
                   8227: /usr/bin/install -c -o bin -g bin -m 644 ./bison.hairy /usr/pkg/share/bison.hairy
                   8228: cd .; for f in bison.info*;  do /usr/bin/install -c -o bin -g bin -m 644 $f /usr/pkg/info/$f; done
                   8229: /usr/bin/install -c -o bin -g bin -m 644 ./bison.1 /usr/pkg/man/man1/bison.1
                   8230: ===>  Registering installation for bison-1.25
                   8231: 
                   8232: You can now use bison, and also - if you decide so - remove it with pkg_delete
                   8233: bison. Should you decide that you want a binary package, do this now:
                   8234: 
                   8235: # make package
                   8236: >> Checksum OK for bison-1.25.tar.gz.
                   8237: ===>  Building package for bison-1.25
                   8238: Creating package bison-1.25.tgz
                   8239: Registering depends:.
                   8240: Creating gzip'd tar ball in '/u/pkgsrc/lang/bison/bison-1.25.tgz'
                   8241: 
                   8242: Now that you don't need the source and object files any more, clean up:
                   8243: 
                   8244: # make clean
                   8245: ===>  Cleaning for bison-1.25
                   8246: 
                   8247: Appendix B. Build logs
                   8248: 
                   8249: Table of Contents
                   8250: 
                   8251: B.1. Building figlet
                   8252: B.2. Packaging figlet
                   8253: 
                   8254: B.1. Building figlet
                   8255: 
                   8256: # make
                   8257: ===> Checking for vulnerabilities in figlet-2.2.1nb2
                   8258: => figlet221.tar.gz doesn't seem to exist on this system.
                   8259: => Attempting to fetch figlet221.tar.gz from ftp://ftp.figlet.org/pub/figlet/program/unix/.
                   8260: => [172219 bytes]
                   8261: Connected to ftp.plig.net.
                   8262: 220 ftp.plig.org NcFTPd Server (licensed copy) ready.
                   8263: 331 Guest login ok, send your complete e-mail address as password.
                   8264: 230-You are user #5 of 500 simultaneous users allowed.
                   8265: 230-
                   8266: 230-  ___ _             _ _
                   8267: 230- |  _| |_ ___   ___| |_|___   ___ ___ ___
                   8268: 230- |  _|  _| . |_| . | | | . |_| . |  _| . |
                   8269: 230- |_| |_| |  _|_|  _|_|_|_  |_|___|_| |_  |
                   8270: 230-         |_|   |_|     |___|         |___|
                   8271: 230-
                   8272: 230-** Welcome to ftp.plig.org **
                   8273: 230-
                   8274: 230-Please note that all transfers from this FTP site are logged. If you
                   8275: 230-do not like this, please disconnect now.
                   8276: 230-
1.19      snj      8277: 230-This archive is available via
1.1       dsieger  8278: 230-
                   8279: 230-HTTP:  http://ftp.plig.org/
                   8280: 230-FTP:   ftp://ftp.plig.org/     (max 500 connections)
                   8281: 230-RSYNC: rsync://ftp.plig.org/   (max  30 connections)
                   8282: 230-
                   8283: 230-Please email comments, bug reports and requests for packages to be
                   8284: 230-mirrored to ftp-admin@plig.org.
                   8285: 230-
                   8286: 230-
                   8287: 230 Logged in anonymously.
                   8288: Remote system type is UNIX.
                   8289: Using binary mode to transfer files.
                   8290: 200 Type okay.
                   8291: 250 "/pub" is new cwd.
                   8292: 250-"/pub/figlet" is new cwd.
                   8293: 250-
                   8294: 250-Welcome to the figlet archive at ftp.figlet.org
                   8295: 250-
                   8296: 250-    ftp://ftp.figlet.org/pub/figlet/
                   8297: 250-
                   8298: 250-The official FIGlet web page is:
                   8299: 250-    http://www.figlet.org/
                   8300: 250-
                   8301: 250-If you have questions, please mailto:info@figlet.org. If you want to
                   8302: 250-contribute a font or something else, you can email us.
                   8303: 250
                   8304: 250 "/pub/figlet/program" is new cwd.
                   8305: 250 "/pub/figlet/program/unix" is new cwd.
                   8306: local: figlet221.tar.gz remote: figlet221.tar.gz
                   8307: 502 Unimplemented command.
                   8308: 227 Entering Passive Mode (195,40,6,41,246,104)
                   8309: 150 Data connection accepted from 84.128.86.72:65131; transfer starting for figlet221.tar.gz (172219 bytes).
                   8310: 38% |**************                       | 65800      64.16 KB/s    00:01 ETA
                   8311: 226 Transfer completed.
                   8312: 172219 bytes received in 00:02 (75.99 KB/s)
                   8313: 221 Goodbye.
                   8314: => Checksum OK for figlet221.tar.gz.
                   8315: ===> Extracting for figlet-2.2.1nb2
                   8316: ===> Required installed package ccache-[0-9]*: ccache-2.3nb1 found
                   8317: ===> Patching for figlet-2.2.1nb2
                   8318: ===> Applying pkgsrc patches for figlet-2.2.1nb2
                   8319: ===> Overriding tools for figlet-2.2.1nb2
                   8320: ===> Creating toolchain wrappers for figlet-2.2.1nb2
                   8321: ===> Configuring for figlet-2.2.1nb2
                   8322: ===> Building for figlet-2.2.1nb2
                   8323: gcc -O2 -DDEFAULTFONTDIR=\"/usr/pkg/share/figlet\"  -DDEFAULTFONTFILE=\"standard.flf\"  figlet.c zipio.c crc.c inflate.c -o figlet
                   8324: chmod a+x figlet
                   8325: gcc -O2 -o chkfont chkfont.c
                   8326: => Unwrapping files-to-be-installed.
                   8327: #
                   8328: # make install
                   8329: ===> Checking for vulnerabilities in figlet-2.2.1nb2
                   8330: ===> Installing for figlet-2.2.1nb2
                   8331: install -d -o root -g wheel -m 755 /usr/pkg/bin
                   8332: install -d -o root -g wheel -m 755 /usr/pkg/man/man6
                   8333: mkdir -p /usr/pkg/share/figlet
                   8334: cp figlet /usr/pkg/bin
                   8335: cp chkfont /usr/pkg/bin
                   8336: chmod 555 figlist showfigfonts
                   8337: cp figlist /usr/pkg/bin
                   8338: cp showfigfonts /usr/pkg/bin
                   8339: cp fonts/*.flf /usr/pkg/share/figlet
                   8340: cp fonts/*.flc /usr/pkg/share/figlet
                   8341: cp figlet.6 /usr/pkg/man/man6
                   8342: ===> Registering installation for figlet-2.2.1nb2
                   8343: #
                   8344: 
                   8345: B.2. Packaging figlet
                   8346: 
                   8347: # make package
                   8348: ===> Checking for vulnerabilities in figlet-2.2.1nb2
                   8349: ===> Packaging figlet-2.2.1nb2
                   8350: ===> Building binary package for figlet-2.2.1nb2
                   8351: Creating package /home/cvs/pkgsrc/packages/i386/All/figlet-2.2.1nb2.tgz
                   8352: Using SrcDir value of /usr/pkg
                   8353: Registering depends:.
                   8354: #
                   8355: 
                   8356: Appendix C. Directory layout of the pkgsrc FTP server
                   8357: 
                   8358: Table of Contents
                   8359: 
1.23      jakllsch 8360: C.1. distfiles: The distributed source files
                   8361: C.2. misc: Miscellaneous things
                   8362: C.3. packages: Binary packages
                   8363: C.4. reports: Bulk build reports
                   8364: C.5. current, pkgsrc-20xxQy: source packages
1.1       dsieger  8365: 
                   8366: As in other big projects, the directory layout of pkgsrc is quite complex for
                   8367: newbies. This chapter explains where you find things on the FTP server. The
                   8368: base directory on ftp.NetBSD.org is /pub/pkgsrc/. On other servers it may be
                   8369: different, but inside this directory, everything should look the same, no
                   8370: matter on which server you are. This directory contains some subdirectories,
                   8371: which are explained below.
                   8372: 
1.23      jakllsch 8373: C.1. distfiles: The distributed source files
1.1       dsieger  8374: 
                   8375: The directory distfiles contains lots of archive files from all pkgsrc
                   8376: packages, which are mirrored here. The subdirectories are called after their
                   8377: package names and are used when the distributed files have names that don't
                   8378: explicitly contain a version number or are otherwise too generic (for example
                   8379: release.tar.gz).
                   8380: 
1.23      jakllsch 8381: C.2. misc: Miscellaneous things
1.1       dsieger  8382: 
                   8383: This directory contains things that individual pkgsrc developers find worth
                   8384: publishing.
                   8385: 
1.23      jakllsch 8386: C.3. packages: Binary packages
1.1       dsieger  8387: 
1.3       rillig   8388: This directory contains binary packages for the various platforms that are
                   8389: supported by pkgsrc. Each subdirectory is of the form OPSYS/ARCH/OSVERSION_TAG.
                   8390: The meaning of these variables is:
                   8391: 
                   8392:   * OPSYS is the name of the operating system for which the packages have been
1.9       rillig   8393:     built. The name is taken from the output of the uname command, so it may
                   8394:     differ from the one you are used to hear.
1.3       rillig   8395: 
1.8       rillig   8396:   * ARCH is the hardware architecture of the platform for which the packages
1.10      hubertf  8397:     have been built. It also includes the ABI (Application Binary Interface)
                   8398:     for platforms that have several of them.
1.3       rillig   8399: 
1.8       rillig   8400:   * OSVERSION is the version of the operating system. For version numbers that
                   8401:     change often (for example NetBSD-current), the often-changing part should
                   8402:     be replaced with an x, for example 4.99.x.
1.3       rillig   8403: 
1.23      jakllsch 8404:   * TAG is either 20xxQy for a stable branch, or head for packages built from
1.8       rillig   8405:     the HEAD branch. The latter should only be used when the packages are
                   8406:     updated on a regular basis. Otherwise the date from checking out pkgsrc
                   8407:     should be appended, for example head_20071015.
1.3       rillig   8408: 
                   8409: The rationale for exactly this scheme is that the pkgsrc users looking for
                   8410: binary packages can quickly click through the directories on the server and
                   8411: find the best binary packages for their machines. Since they usually know the
                   8412: operating system and the hardware architecture, OPSYS and ARCH are placed
                   8413: first. After these choices, they can select the best combination of OSVERSION
                   8414: and TAG together, since it is usually the case that packages stay compatible
                   8415: between different version of the operating system.
                   8416: 
                   8417: In each of these directories, there is a whole binary packages collection for a
                   8418: specific platform. It has a directory called All which contains all binary
                   8419: packages. Besides that, there are various category directories that contain
                   8420: symbolic links to the real binary packages.
1.1       dsieger  8421: 
1.23      jakllsch 8422: C.4. reports: Bulk build reports
1.8       rillig   8423: 
                   8424: Here are the reports from bulk builds, for those who want to fix packages that
                   8425: didn't build on some of the platforms. The structure of subdirectories should
1.23      jakllsch 8426: look like the one in Section C.3, "packages: Binary packages".
1.8       rillig   8427: 
1.23      jakllsch 8428: C.5. current, pkgsrc-20xxQy: source packages
1.1       dsieger  8429: 
                   8430: These directories contain the "real" pkgsrc, that is the files that define how
                   8431: to create binary packages from source archives.
                   8432: 
                   8433: The directory pkgsrc contains a snapshot of the CVS repository, which is
                   8434: updated regularly. The file pkgsrc.tar.gz contains the same as the directory,
                   8435: ready to be downloaded as a whole.
                   8436: 
                   8437: In the directories for the quarterly branches, there is an additional file
1.23      jakllsch 8438: called pkgsrc-20xxQy.tar.gz, which contains the state of pkgsrc when it was
1.1       dsieger  8439: branched.
                   8440: 
                   8441: Appendix D. Editing guidelines for the pkgsrc guide
                   8442: 
                   8443: Table of Contents
                   8444: 
                   8445: D.1. Make targets
                   8446: D.2. Procedure
                   8447: 
                   8448: This section contains information on editing the pkgsrc guide itself.
                   8449: 
                   8450: D.1. Make targets
                   8451: 
                   8452: The pkgsrc guide's source code is stored in pkgsrc/doc/guide/files, and several
                   8453: files are created from it:
                   8454: 
                   8455:   * pkgsrc/doc/pkgsrc.txt
                   8456: 
                   8457:   * pkgsrc/doc/pkgsrc.html
                   8458: 
1.2       rillig   8459:   * http://www.NetBSD.org/docs/pkgsrc/
1.1       dsieger  8460: 
1.2       rillig   8461:   * http://www.NetBSD.org/docs/pkgsrc/pkgsrc.pdf: The PDF version of the pkgsrc
                   8462:     guide.
1.1       dsieger  8463: 
1.2       rillig   8464:   * http://www.NetBSD.org/docs/pkgsrc/pkgsrc.ps: PostScript version of the
                   8465:     pkgsrc guide.
1.1       dsieger  8466: 
                   8467: D.2. Procedure
                   8468: 
                   8469: The procedure to edit the pkgsrc guide is:
                   8470: 
                   8471:  1. Make sure you have the packages needed to regenerate the pkgsrc guide (and
1.46      obache   8472:     other XML-based NetBSD documentation) installed. These are automatically
                   8473:     installed when you install the meta-pkgs/pkgsrc-guide-tools package.
1.1       dsieger  8474: 
                   8475:  2. Run cd doc/guide to get to the right directory. All further steps will take
                   8476:     place here.
                   8477: 
                   8478:  3. Edit the XML file(s) in files/.
                   8479: 
                   8480:  4. Run bmake to check the pkgsrc guide for valid XML and to build the final
                   8481:     output files. If you get any errors at this stage, you can just edit the
                   8482:     files, as there are only symbolic links in the working directory, pointing
                   8483:     to the files in files/.
                   8484: 
                   8485:  5. (cd files && cvs commit)
                   8486: 
                   8487:  6. Run bmake clean && bmake to regenerate the output files with the proper RCS
                   8488:     Ids.
                   8489: 
                   8490:  7. Run bmake regen to install and commit the files in both pkgsrc/doc and
                   8491:     htdocs.
                   8492: 
                   8493:     Note
                   8494: 
                   8495:     If you have added, removed or renamed some chapters, you need to
                   8496:     synchronize them using cvs add or cvs delete in the htdocs directory.
                   8497: 

CVSweb <webmaster@jp.NetBSD.org>