Annotation of htdocs/docs/bootcd.html, revision 1.2

1.1       dsieger     1: <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
                      2: <html>
                      3: <head>
                      4: <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
                      5: <meta name="generator" content="Website XSL Stylesheet V2.6.0">
                      6: <link rel="home" href="../." title="Welcome to The NetBSD Project: Of course it runs NetBSD.">
                      7: <link rel="up" href="../docs/." title="NetBSD Documentation">
                      8: <link rel="previous" href="../docs/books.html" title="Recommended reading">
                      9: <link rel="next" href="../docs/bsd/." title="Historic BSD information">
                     10: <link rel="first" href="../docs/Hardware/." title="Hardware Documentation">
                     11: <link rel="last" href="../docs/x/." title="NetBSD Documentation: The X Window System">
                     12: <link rel="stylesheet" href="/NetBSD.css" type="text/css">
                     13:   
                     14:     <title>NetBSD Bootable CD ROM HOWTO</title>
                     15:   </head>
                     16: <body class="website"><div class="webpage">
                     17: <a name="docs-bootcd"></a><h1>NetBSD Bootable CD ROM HOWTO</h1>
                     18: <div class="sect1" lang="en">
                     19: <div class="titlepage"></div>
                     20:     <p>
                     21:       This document attempts to explain how to make bootable NetBSD
                     22:       CD ROMs.
                     23:     </p>
                     24:   </div>
                     25: <h3 class="title"><a name="overview">Overview</a></h3>
                     26: <ul><li><a href="#creating-the-image">Creating the CD image</a></li></ul>
                     27: <h3 class="title"><a name="platforms">Platform specific instructions</a></h3>
                     28: <ul>
                     29: <li><a href="#alphaimage">NetBSD/alpha</a></li>
                     30: <li><a href="#i386image">NetBSD/i386</a></li>
                     31: <li><a href="#macppcimage">NetBSD/macppc</a></li>
                     32: <li><a href="#pmaximage">NetBSD/pmax</a></li>
                     33: <li><a href="#sgimips">NetBSD/sgimips</a></li>
                     34: <li><a href="#sparcimage">NetBSD/sparc</a></li>
                     35: <li><a href="#sparc64image">NetBSD/sparc64</a></li>
                     36: <li><a href="#sun2image">NetBSD/sun2</a></li>
                     37: <li><a href="#sun3image">NetBSD/sun3</a></li>
                     38: <li><a href="#vaximage">NetBSD/vax</a></li>
                     39: <li><a href="#multiimage">Multiple Machine</a></li>
                     40: </ul>
                     41: <h3 class="title"><a name="examining-the-image">Examining the CD image</a></h3>
                     42: <ul>
                     43: <li><a href="#netbsd_mountimage">Under NetBSD</a></li>
                     44: <li><a href="#linux_mountimage">Under Linux</a></li>
                     45: <li><a href="#solaris_mountimage">Under Solaris</a></li>
                     46: </ul>
                     47: <h3 class="title"><a name="burning-the-cd">Burning the CD</a></h3>
                     48: <ul>
                     49: <li><a href="#cdrecord">Using cdrecord (U*nix)</a></li>
                     50: <li><a href="#winrecord">Under Windows</a></li>
                     51: <li><a href="#macrecord">Under Mac OS</a></li>
                     52: </ul>
                     53: <hr>
                     54: <h3 class="title">Overview</h3>
                     55:         <h4 class="title">
                     56: <a name="creating-the-image"></a>Creating the CD image (<a href="#overview">top</a>)
                     57:   </h4>
                     58:         <p>
                     59:           The first step in making a CD ROM is to create an image of the CD.
                     60:           This image will initially be stored as a (rather large, up to 650 Mb)
                     61:           file on your hard drive and then later written to the CD.
                     62:         </p>
                     63:         <p>
                     64:           This section assumes you have access to the program
                     65:           <code class="code">mkisofs</code>.  If you are making the CD image on a NetBSD
                     66:           machine, you can install <code class="code">mkisofs</code> from the
                     67:           <a href="ftp://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc/sysutils/cdrtools/README.html" target="_top"><code class="filename">sysutils/cdrtools</code></a>
                     68:           package.
                     69:         </p>
                     70:         <p>
                     71:           It is assumed the directory <code class="code">/cdsources</code> exists on your system
                     72:           and contains all the files which you want to end up on the CD ROM.
                     73:           One suggested layout for making an install CD is to follow the
                     74:           directory structure on <a href="ftp://ftp.NetBSD.org/pub/NetBSD/NetBSD-3.0/" target="_top">ftp.NetBSD.org</a>.  For example:
                     75:           </p>
                     76: <pre class="programlisting">
                     77: /cdsources/i386/.....
                     78: /cdsources/sparc/.....</pre>
                     79: <p>
                     80:         </p>
                     81:       <hr>
                     82: <h3 class="title">Platform specific instructions</h3>
                     83:         <h4 class="title">
                     84: <a name="alphaimage"></a>NetBSD/alpha (<a href="#platforms">top</a>)
                     85:   </h4>
                     86:         <p>
                     87:           There are 2 steps involved in making a NetBSD/alpha bootable CD ROM.
                     88:           The first is to create an ISO 9660 image of whatever you want
                     89:           to put on the CD.  This image must have the secondary boot program and
                     90:           kernel in its root directory.  In addition, the primary boot program
                     91:           will be needed for the second step.  To put the boot programs and 
                     92:           kernel in the right places, do the following:
                     93:         </p>
                     94: 
                     95:         <pre class="programlisting">
                     96: cd /cdsources/alpha/binary/sets
                     97: tar -zxvf base.tgz ./usr/mdec/boot ./usr/mdec/bootxx_cd9660
                     98: mv -f ./usr/mdec/boot /cdsources/boot
                     99: mkdir /tmp/mdec.alpha
                    100: mv -f ./usr/mdec/bootxx_cd9660 /tmp/mdec.alpha/bootxx_cd9660
                    101: rm -rf ./usr
                    102: cd /cdsources/alpha/installation/instkernel
                    103: cp -f netbsd.gz /cdsources/netbsd.gz</pre>
                    104: 
                    105:         <p>
                    106:           Now create the ISO 9660 image.
                    107:         </p>
                    108:         <pre class="programlisting">mkisofs -o output.iso -l -J -R -allow-leading-dots /cdsources</pre>
                    109: 
                    110:         <p>
                    111:           The second step is to install NetBSD/alpha disk and CD ROM bootstrap
                    112:           software using <a href="http://netbsd.gw.com/cgi-bin/man-cgi?installboot+8+NetBSD-current">installboot(8)</a>.  This is done with the
                    113:           following command:
                    114:         </p>
                    115: 
                    116:         <pre class="programlisting">installboot -m alpha -v output.iso /tmp/mdec.alpha/bootxx_cd9660</pre>
                    117: 
                    118:       
                    119:         <h4 class="title">
                    120: <a name="i386image"></a>NetBSD/i386 (<a href="#platforms">top</a>)
                    121:   </h4>
                    122:         <p>
                    123:           This section shows how to make a NetBSD/i386 bootable CD ROM.  The
                    124:           particular example is how to make a NetBSD-3.0/i386 install CD.  It
                    125:           is assumed that the directory <code class="code">/cdsources/</code> exists on your system
                    126:           and contains all the files and the directory structure from the
                    127:           <a href="ftp://ftp.NetBSD.org/pub/NetBSD/NetBSD-3.0/i386/" target="_top">NetBSD-3.0/i386</a>
                    128:           distribution.
                    129:           The exact contents depend on what you want on your CD.  The
                    130:           important part is that
                    131:           <code class="code">/cdsources/i386/installation/floppy/boot-big.fs</code> exists as that will
                    132:           be used as the bootable image.
                    133:         </p>
                    134:         <p>
                    135:           To create the CD image use the following command:
                    136:         </p>
                    137: 
                    138:         <pre class="programlisting">
                    139: mkisofs -o output.iso -b i386/installation/floppy/boot-big.fs \ 
                    140:   -c boot.catalog -l -J -R -allow-leading-dots /cdsources</pre>
                    141: 
                    142:         <p>
                    143:           This will create a file, <code class="code">output.iso</code>, which is the CD image.
                    144:           The options are:
                    145:           </p>
                    146: <div class="itemizedlist"><ul type="disc">
                    147: <li>
                    148:               <p>
                    149:                 <code class="code">-b i386/installation/floppy/boot-big.fs</code>
                    150:                 -- specifies the boot image to be used
                    151:               </p>
                    152:             </li>
                    153: <li>
                    154:               <p>
                    155:                 <code class="code">-c boot.catalog</code>
                    156:                 -- creates a boot catalog
                    157:               </p>
                    158:             </li>
                    159: <li>
                    160:               <p>
                    161:                 <code class="code">-l</code> -- Allow long (32 character) file names
                    162:               </p>
                    163:             </li>
                    164: <li>
                    165:               <p><code class="code">-J</code> -- Includes Joliet extensions</p>
                    166:             </li>
                    167: <li>
                    168:               <p><code class="code">-R</code> -- Sets file permissions including setuid</p>
                    169:             </li>
                    170: <li> 
                    171:               <p>
                    172:                 <code class="code">-allow-leading-dots</code> -- Allows filenames to begin with
                    173:                 &#8220;<span class="quote">.</span>&#8221;, was <code class="code">-L</code> in older versions
                    174:                of mkisofs.
                    175:               </p>
                    176:             </li>
                    177: <li>
                    178:               <p>
                    179:                 <code class="code">/cdsources</code> -- Specifies that the directory
                    180:                 <code class="code">/cdsources</code> is the root of the CD image
                    181:               </p>
                    182:             </li>
                    183: </ul></div>
                    184: <p>
                    185:         </p>
                    186:       
                    187:         <h4 class="title">
                    188: <a name="macppcimage"></a>NetBSD/macppc (<a href="#platforms">top</a>)
                    189:   </h4>
                    190:         <p>
                    191:           All supported macppc models can boot from the first session of a CD ROM.
                    192:           The procedure for making a CD bootable depends on what version of Open
1.2     ! dsieger   193:           Firmware your model has. Refer to the <a href="../ports/macppc/models.html" target="_top">NetBSD/macppc Model Support Page</a> to
1.1       dsieger   194:           determine your system's Open Firmware version and its support status. 
                    195:         </p>
                    196: 
                    197:         <p>
                    198:           It is assumed that the directory <code class="code">/cdsources/</code> exists on your
                    199:           system and contains all the files and the directory structure from the <a href="ftp://ftp.NetBSD.org/pub/NetBSD/NetBSD-3.0/macppc/" target="_top">NetBSD-3.0/macppc</a>
                    200:           distribution.  The exact contents depend on what you want on your CD.
                    201:         </p>
                    202: 
                    203:         <p>
                    204:           Make sure your <code class="code">/cdsources/</code> has <code class="code">ofwboot.xcf</code> (the macppc
                    205:           bootloader) and a kernel (we suggest <code class="code">netbsd.GENERIC_MD</code>, the 
                    206:           ramdisk-based install kernel that supports all models).
                    207:         </p>
                    208: 
                    209:         <pre class="programlisting">
                    210: cd /cdsources
                    211: cp macppc/binary/kernel/netbsd-GENERIC_MD.gz netbsd.macppc
                    212: cp macppc/installation/ofwboot.xcf .</pre>
                    213: 
                    214:         <p>
                    215:           The NetBSD/macppc official ISO image is bootable on all supported models
                    216:           because it does some special magic.  The CD is created as an HFS
                    217:           hybrid CD with an Apple Disk Partition Table using the <code class="code">-hfs -part</code>
                    218:           options in mkisofs. The Partition Table is then modified to map (or point to)
                    219:           a driver file which makes the CD bootable on the PPC Macintosh and the
                    220:           driver file is appended to the end of the iso image.
                    221:         </p>
                    222: 
                    223:         <p>
                    224:           The CD won't be bootable via the
                    225:           &#8220;<span class="quote"><code class="code">C</code></span>&#8221; snag key though.  However
                    226:           this can be added with the following, although it may not
                    227:           work on all Macppc systems. (Adding the option will not
                    228:           impair the use of booting via OpenFirmware commands.)  To
                    229:           do this, create a CHRP bootscript in a top-level
                    230:           directory, tag the bootscript file with the proper Mac OS
                    231:           Type and Creator, and "bless" the directory which contains
                    232:           the file.  Mkisofs will attach the proper Mac OS Type and
                    233:           Creator codes while generating the ISO image file if the
                    234:           following line is added to the file
                    235:           <code class="code">/usr/src/distrib/cdrom/hfsmap.lst</code>:
                    236:         </p>
                    237: 
                    238:         <pre class="programlisting">.chrp - 'chrp' 'tbxi'</pre>
                    239: 
                    240:         <p>
                    241:           Then place the following file named <code class="code">bootscript</code> in the (top-level)
                    242:           <code class="code">macppc</code> directory:
                    243:         </p>
                    244: 
                    245:         <pre class="programlisting">
                    246: &lt;CHRP-BOOT&gt;
                    247: &lt;COMPATIBLE&gt;MacRISC&lt;/COMPATIBLE&gt;
                    248: &lt;DESCRIPTION&gt;
                    249: NetBSD/macppc bootable CD script
                    250: &lt;/DESCRIPTION&gt;
                    251: &lt;BOOT-SCRIPT&gt;
                    252: boot cd:,ofwboot.xcf netbsd.macppc
                    253: &lt;/BOOT-SCRIPT&gt;
                    254: &lt;/CHRP-BOOT&gt;</pre>
                    255: 
                    256:         <p>Create the macppc bootable CD image using the following commands:</p>
                    257: 
                    258:         <pre class="programlisting">
                    259: cdrom_util="/usr/src/distrib/cdrom"
                    260: snag_boot="-map ${cdrom_util}/hfsmap.lst -hfs-bless ./macppc"
                    261: ofw_boot="-boot-hfs-file ${cdrom_util}/macppc_installboot/macppcboot.raw"
                    262: mkisofs -o output.iso -hfs -part ${snag_boot} ${ofw_boot} -l -J -r -allow-leading-dots /cdsources
                    263: blknum=`ls -l output.iso | awk '{print $5}'`
                    264: blknum=`expr ${blknum} / 512`
                    265: ${cdrom_util}/macppc_installboot/macppc_installboot output.iso ${blknum} 756
                    266: dd if=/usr/mdec/ofwboot bs=64k count=1 conv=sync &gt;&gt; output.iso</pre>
                    267: 
                    268:         <p>
                    269:           Once you have burnt the CD, make sure Open Firmware can find the
                    270:           bootloader on your new CD ROM (see
1.2     ! dsieger   271:           <a href="../ports/macppc/faq.html#ofw-dir-listing" target="_top">How do I get a listing (in
1.1       dsieger   272:           Open Firmware) of the files on my disk?</a> in the FAQ).  This is
                    273:           important, since Open Firmware treats the boot file name as case
                    274:           sensitive.  Most (if not all) Open Firmware 1.0.5, 1.1.22, and 2.0.x systems 
                    275:           will think the bootloader is <code class="code">OFWBOOT.XCF</code> and Open Firmware 3 should
                    276:           properly see it as <code class="code">ofwboot.xcf</code>. 
                    277:         </p>
                    278:       
                    279:         <h4 class="title">
                    280: <a name="pmaximage"></a>NetBSD/pmax (<a href="#platforms">top</a>)
                    281:   </h4>
                    282:         <p>
                    283:           NetBSD/pmax can boot from either a FFS or ISO 9660 CD ROM.  This
                    284:           section assumes you are making an ISO 9660 CD ROM.   Please note that 
                    285:           the bootxx_cd9660 program was not added until <span class="emphasis"><em>after</em></span> NetBSD-1.4.x.
                    286:           If you're running NetBSD-1.4.x, you can obtain <code class="code">boot.pmax</code>,
                    287:           <code class="code">installboot</code>, and <code class="code">bootxx_cd9660</code> from a -current snapshot.
                    288:           Make sure the sources are from <span class="emphasis"><em>after</em></span> late November, 1999.
                    289:         </p>
                    290:         <p>
                    291:           There are 2 steps involved in making a NetBSD/pmax bootable CD ROM.
                    292:           The first is to create an ISO 9660 image of whatever you want
                    293:           to put on the CD.  This image must have the secondary boot program
                    294:           and kernel in its root directory.
                    295:           In addition, the primary boot program 
                    296:           will be needed for the second step.  To put the boot programs and 
                    297:           kernel in the right places, do the following:
                    298:         </p>
                    299: 
                    300:         <pre class="programlisting">
                    301: cd /cdsources/pmax/binary/sets
                    302: tar -zxvf base.tgz ./usr/mdec/boot.pmax ./usr/mdec/bootxx_cd9660
                    303: mv -f ./usr/mdec/boot.pmax /cdsources/boot.pmax
                    304: mkdir /tmp/mdec.pmax
                    305: mv -f ./usr/mdec/bootxx_cd9660 /tmp/mdec.pmax/bootxx_cd9660
                    306: rmdir ./usr/mdec
                    307: 
                    308: cd /cdsources/pmax/binary/kernel
                    309: cp -f install.gz /cdsources/netbsd.pmax.gz
                    310: gunzip /cdsources/netbsd.pmax.gz</pre>
                    311: 
                    312:         <p>
                    313:           Now create the ISO 9660 image.
                    314:         </p>
                    315: 
                    316:         <pre class="programlisting">mkisofs -o output.iso -l -J -r -allow-leading-dots /cdsources</pre>
                    317: 
                    318:         <p>
                    319:           The second step is to install NetBSD/pmax disk and CD ROM bootstrap
                    320:           software using <a href="http://netbsd.gw.com/cgi-bin/man-cgi?installboot+8+NetBSD-current">installboot(8)</a>.  The
                    321:           <a href="http://netbsd.gw.com/cgi-bin/man-cgi?installboot+8+NetBSD-current">installboot(8)</a> command is used in the following way:
                    322:         </p>
                    323: 
                    324:         <pre class="programlisting">installboot -m pmax -v output.iso /usr/mdec/bootxx_cd9660</pre>
                    325: 
                    326:       
                    327:         <h4 class="title">
                    328: <a name="sgimips"></a>NetBSD/sgimips (<a href="#platforms">top</a>)
                    329:   </h4>
                    330:         <p>
                    331:           Please see <a href="http://mail-index.NetBSD.org/port-sgimips/2003/06/29/0000.html" target="_top">this
1.2     ! dsieger   332:           posting</a> to the <a href="../mailinglists/#port-sgimips" target="_top">port-sgimips
1.1       dsieger   333:           MailingList</a> for instructions on how to create a bootable CD ROM.  Note
                    334:           that these instructions have not been verified by the NetBSD developers (yet).
                    335:         </p>
                    336:       
                    337:         <h4 class="title">
                    338: <a name="sparcimage"></a>NetBSD/sparc (<a href="#platforms">top</a>)
                    339:   </h4>
                    340:         <p>
                    341:           There are three steps involved in making a NetBSD/sparc bootable CD ROM.
                    342:           Step 1 is to create an "almost" full ISO 9660 image of whatever you want
                    343:           to put on the CD.  For example:
                    344:         </p>
                    345: 
                    346:         <pre class="programlisting">mkisofs -o output.iso -l -J -r -allow-leading-dots /cdsources</pre>
                    347: 
                    348:         <p>
                    349:           Now get a bootable floppy image.  For NetBSD-3.0/sparc, this image
                    350:           may be found at
                    351:           <a href="ftp://ftp.NetBSD.org/pub/NetBSD/NetBSD-3.0/sparc/installation/bootfs/boot.fs.gz" target="_top">ftp://ftp.NetBSD.org/pub/NetBSD/NetBSD-3.0/sparc/installation/bootfs/boot.fs.gz</a>
                    352:         </p>
                    353: 
                    354:         <p>
                    355:           The final step is to rewrite the ISO image with (a) a sun disklabel at
                    356:           the start, (b) the original image at the end, and (c) with the right
                    357:           offset/size values in the disklabel for the bootloader.  The program
                    358:           <code class="code">mksunbootcd</code> will perform this task.  If <code class="code">mksunbootcd</code>
                    359:           is not installed on your system, it can be installed from the
                    360:           <a href="ftp://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc/sysutils/mksunbootcd/README.html" target="_top"><code class="filename">sysutils/mksunbootcd</code></a>
                    361:           package.  If you're creating the image on a non-NetBSD system, you
                    362:           can try compiling <code class="code">mksunbootcd</code> on your system.  The sources
                    363:           are available at
                    364:           <a href="ftp://ftp.NetBSD.org/pub/NetBSD/misc/mksunbootcd/" target="_top">ftp://ftp.NetBSD.org/pub/NetBSD/misc/mksunbootcd/</a>.
                    365:         </p>
                    366: 
                    367:         <p>
                    368:           To use <code class="code">mksunbootcd</code> use the following:
                    369:         </p>
                    370: 
                    371:         <pre class="programlisting">mksunbootcd output.iso boot.fs boot.fs boot.fs</pre>
                    372: 
                    373:         <p>
                    374:           The bootable image is listed three times corresponding to what will get
                    375:           booted by a sun4, sun4c and sun4m system respectively.  If you have
                    376:           different bootable images for the three machines, or if you also have
                    377:           a bootable image for sun2, sun3, and sun3x systems, you can do something
                    378:           like:
                    379:         </p>
                    380: 
                    381:         <pre class="programlisting">mksunbootcd output.iso boot-sun4.fs boot-sun4c.fs boot-sun4m.fs boot-sun3.fs</pre>
                    382: 
                    383:         <p>
                    384:           Note that <code class="code">mksunbootcd</code> rewrites the <code class="code">output.iso</code> file, so
                    385:           don't run it multiple times.
                    386:         </p>
                    387: 
                    388:         <p>
                    389:           As a note, this step is fine to perform on a NFS mounted directory.  Ie, 
                    390:           if your ISO image is on a remote machine, it can be mounted on a NetBSD
                    391:           machine for running <code class="code">mksunbootcd</code> without requiring extreme amounts
                    392:           of data to be transferred over the network.
                    393:         </p>
                    394:       
                    395:         <h4 class="title">
                    396: <a name="sparc64image"></a>NetBSD/sparc64 (<a href="#platforms">top</a>)
                    397:   </h4>
                    398:         <p>
                    399:           There are three steps involved in making a NetBSD/sparc64 bootable CD ROM.
                    400:           Step 1 is to create an "almost" full ISO 9660 image of whatever you want to
                    401:           put on the CD.  For example:
                    402:         </p>
                    403: 
                    404:         <pre class="programlisting">mkisofs -o output.iso -l -J -r -allow-leading-dots /cdsources</pre>
                    405: 
                    406:         <p>
                    407:           Now get a bootable floppy image.  For NetBSD-3.0/sparc64, this image
                    408:           may be found at <a href="ftp://ftp.NetBSD.org/pub/NetBSD/NetBSD-3.0/sparc64/installation/misc/boot.fs.gz" target="_top">ftp://ftp.NetBSD.org/pub/NetBSD/NetBSD-3.0/sparc64/installation/misc/boot.fs.gz</a>.
                    409:         </p>
                    410: 
                    411:         <p>
                    412:           The final step is to rewrite the ISO image with (a) a sun disklabel at
                    413:           the start, (b) the original image at the end, and (c) with the right
                    414:           offset/size values in the disklabel for the bootloader.  The program
                    415:           <code class="code">sunbootcd.sh</code> will perform this task.  If <code class="code">sunbootcd.sh</code>
                    416:           is not installed on your system, it can be obtained from <a href="ftp://ftp.NetBSD.org/pub/NetBSD/NetBSD-current/src/distrib/common/sunbootcd.sh" target="_top">ftp://ftp.NetBSD.org/pub/NetBSD/NetBSD-current/src/distrib/common/sunbootcd.sh</a>.
                    417:         </p>
                    418: 
                    419:         <p>
                    420:           To use <code class="code">sunbootcd.sh</code> use the following:
                    421:         </p>
                    422: 
                    423:         <pre class="programlisting">sunbootcd.sh output.iso - - - - boot.fs</pre>
                    424: 
                    425:         <p>
                    426:           The arguments are for bootable images for sun4, sun4c, sun4m, sun4d, and
                    427:           sun4u.  Specifying a dash instead of a boot image means the CD will not be
                    428:           bootable for that platform.  In the above example the only platform given
                    429:           a boot image is sun4u.
                    430:         </p>
                    431: 
                    432:         <p>
                    433:           Note that <code class="code">sunbootcd.sh</code> rewrites the <code class="code">output.iso</code> file, so
                    434:           don't run it multiple times.
                    435:         </p>
                    436: 
                    437:         <p>
                    438:           As a note, this step is fine to perform on a NFS mounted directory.  Ie, 
                    439:           if your ISO image is on a remote machine, it can be mounted on a NetBSD
                    440:           machine for running <code class="code">sunbootcd.sh</code> without requiring extreme amounts
                    441:           of data to be transferred over the network.
                    442:         </p>
                    443: 
                    444:         <p>
                    445:           Be aware that <code class="code">sunbootcd.sh</code> will produce a CD that is not
                    446:           recognized by vold under Solaris 10.  If you want to mount the NetBSD
                    447:           install CD under Solaris, you will first need to stop vold.
                    448:         </p>
                    449: 
                    450:         <pre class="programlisting">/etc/init.d/volmgt stop</pre>
                    451: 
                    452:       
                    453:         <h4 class="title">
                    454: <a name="sun2image"></a>NetBSD/sun2 (<a href="#platforms">top</a>)
                    455:   </h4>
                    456:         <p>
                    457:           To make a NetBSD/sun2 bootable CD ROM, follow the procedure below for 
                    458:           making a NetBSD/sun3 bootable CD ROM.  This procedure makes a single 
                    459:           CD ROM that will boot on both sun2 and sun3 systems.
                    460:         </p>
                    461: 
                    462:         <p>
                    463:           <span class="emphasis"><em>Optional:</em></span> When following the procedure below, it is beneficial
                    464:           to uncompress the sun2 miniroot 
                    465:           (<code class="code">/cdsources/sun2/installation/miniroot.fs.gz</code>) and binary sets 
                    466:           (<code class="code">/cdsources/sun2/binary/sets/*.tgz</code>) 
                    467:           before writing the ISO 9660 image.  This is entirely optional, and consumes
                    468:           a lot of space on the ISO 9660 image, but saves time during installation 
                    469:           because decompression is very slow on the sun2.
                    470:         </p>
                    471:       
                    472:         <h4 class="title">
                    473: <a name="sun3image"></a>NetBSD/sun3 (<a href="#platforms">top</a>)
                    474:   </h4>
                    475:         <p>
                    476:           There are three steps involved in making a NetBSD/sun3 bootable CD ROM, and
                    477:           this will result in a CD ROM that can also boot NetBSD/sun2.
                    478:         </p>
                    479: 
                    480:         <p>
                    481:           Step 1 is to create an "almost" full ISO 9660 image of whatever you want
                    482:           to put on the CD.  For example:
                    483:         </p>
                    484: 
                    485:         <pre class="programlisting">mkisofs -o output.iso -l -J -r -allow-leading-dots /cdsources</pre>
                    486: 
                    487:         <p>
                    488:           Now build a bootable ffs image.  This image is currently not included in
                    489:           the release, so you have to put it together yourself.
                    490:         </p>
                    491: 
                    492:         <pre class="programlisting">
                    493: mkdir /tmp/boot-sun3
                    494: cd /tmp/boot-sun3
                    495: gzip -cd &lt; /cdsources/sun2/binary/kernel/netbsd.RAMDISK.gz &gt; netbsd.sun2
                    496: ln netbsd.sun2 vmunix
                    497: gzip -cd &lt; /cdsources/sun3/binary/kernel/netbsd.RAMDISK.gz &gt; netbsd.sun3
                    498: gzip -cd &lt; /cdsources/sun3/binary/kernel/netbsd.RAMDISK3X.gz &gt; netbsd.sun3x
                    499: tar xzvf /cdsources/sun3/binary/sets/base.tgz ./usr/mdec
                    500: mv usr/mdec/ufsboot .
                    501: mv usr/mdec/bootxx /tmp/bootxx.sun3
                    502: rm -rf /tmp/boot-sun3/usr
                    503: 
                    504: echo /set type=file uname=root gname=wheel mode=0755 &gt; /tmp/boot-sun3.spec
                    505: echo . type=dir &gt;&gt; /tmp/boot-sun3.spec
                    506: echo ufsboot mode=0644 &gt;&gt; /tmp/boot-sun3.spec
                    507: /bin/ls netbsd* vmunix &gt;&gt; /tmp/boot-sun3.spec
                    508: 
                    509: makefs -t ffs -B be -F /tmp/boot-sun3.spec /tmp/boot-sun3.fs /tmp/boot-sun3
                    510: 
                    511: installboot -m sun3 -v /tmp/boot-sun3.fs /tmp/bootxx.sun3 ufsboot</pre>
                    512: 
                    513:         <p>
                    514:           The final step is to rewrite the ISO image with (a) a sun disklabel at
                    515:           the start, (b) the original image at the end, and (c) with the right
                    516:           offset/size values in the disklabel for the bootloader.  The program
                    517:           <code class="code">mksunbootcd</code> will perform this task.  If <code class="code">mksunbootcd</code>
                    518:           is not installed on your system, it can be installed from the
                    519:           <a href="ftp://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc/sysutils/mksunbootcd/README.html" target="_top"><code class="filename">sysutils/mksunbootcd</code></a>
                    520:           package.  If you're creating the image on a non-NetBSD system, you
                    521:           can try compiling <code class="code">mksunbootcd</code> on your system.  The sources
                    522:           are available at
                    523:           <a href="ftp://ftp.NetBSD.org/pub/NetBSD/misc/mksunbootcd/" target="_top">ftp://ftp.NetBSD.org/pub/NetBSD/misc/mksunbootcd/</a>.
                    524:         </p>
                    525: 
                    526:         <p>
                    527:           To use <code class="code">mksunbootcd</code> use the following:
                    528:         </p>
                    529: 
                    530:         <pre class="programlisting">mksunbootcd output.iso /tmp/boot-sun3.fs </pre>
                    531: 
                    532:         <p>
                    533:           Note that <code class="code">mksunbootcd</code> is also used to make a bootable CD ROM
                    534:           for sparc systems.  It is possible to make a bootable CD ROM that will
                    535:           boot on sparc, sun2, sun3, and sun3x by doing something like:
                    536:         </p>
                    537: 
                    538:         <pre class="programlisting">mksunbootcd output.iso boot-sun4.fs boot-sun4c.fs boot-sun4m.fs boot-sun3.fs</pre>
                    539: 
                    540:         <p>
                    541:           You can rearrange the ordering of the bootable filesystems in any way
                    542:           you want; this only changes the partition numbers that the different
                    543:           filesystems end up with, thus changing the partition number you need
                    544:           to give to the PROM <code class="code">b</code> or <code class="code">boot</code> command to boot the
                    545:           right filesystem for a given architecture.
                    546:         </p>
                    547: 
                    548:         <p>
                    549:           Note that <code class="code">mksunbootcd</code> rewrites the <code class="code">output.iso</code> file, so
                    550:           don't run it multiple times.
                    551:         </p>
                    552: 
                    553:         <p>
                    554:           As a note, this step is fine to perform on a NFS mounted directory.  Ie, 
                    555:           if your ISO image is on a remote machine, it can be mounted on a NetBSD
                    556:           machine for running <code class="code">mksunbootcd</code> without requiring extreme amounts
                    557:           of data to be transferred over the network.
                    558:         </p>
                    559:       
                    560:         <h4 class="title">
                    561: <a name="vaximage"></a>NetBSD/vax (<a href="#platforms">top</a>)
                    562:   </h4>
                    563:         <p>
                    564:           NetBSD/vax can boot from either a FFS or ISO 9660 CD ROM.  This
                    565:           section assumes you are making an ISO 9660 CD ROM.   Please note that
                    566:           this capability was not added until NetBSD-1.5
                    567:         </p>
                    568: 
                    569:         <p>
                    570:           There are 2 steps involved in making a NetBSD/vax bootable CD ROM.
                    571:           The first is to create an ISO 9660 image of whatever you want
                    572:           to put on the CD.  This image must have the secondary boot program
                    573:           and kernel in its root directory.
                    574:           In addition, the primary boot program
                    575:           will be needed for the second step.  To put the boot programs and
                    576:           kernel in the right places, do the following:
                    577:         </p>
                    578: 
                    579:         <pre class="programlisting">
                    580: cd /cdsources/vax/binary/sets
                    581: tar -zxvf base.tgz ./usr/mdec/boot ./usr/mdec/xxboot
                    582: mv -f ./usr/mdec/boot /cdsources/boot.vax
                    583: mkdir /tmp/mdec.vax
                    584: mv -f ./usr/mdec/xxboot /tmp/mdec.vax/xxboot
                    585: rmdir ./usr/mdec
                    586: 
                    587: cd /cdsources/vax/installation/netboot
                    588: cp -f install.ram.gz /cdsources/netbsd.vax.gz
                    589: gunzip -f /cdsources/netbsd.vax.gz</pre>
                    590: 
                    591:         <p>
                    592:           Now create the ISO 9660 image.
                    593:         </p>
                    594: 
                    595:         <pre class="programlisting">mkisofs -o output.iso -l -J -r -allow-leading-dots /cdsources</pre>
                    596: 
                    597:         <p>
                    598:           The second step is to install NetBSD/vax disk and CD ROM bootstrap
                    599:           software using <a href="http://netbsd.gw.com/cgi-bin/man-cgi?installboot+8+NetBSD-current">installboot(8)</a>.  The
                    600:           <a href="http://netbsd.gw.com/cgi-bin/man-cgi?installboot+8+NetBSD-current">installboot(8)</a> command is used in the following way:
                    601:         </p>
                    602: 
                    603:         <pre class="programlisting">installboot -m vax -v output.iso /usr/mdec/xxboot</pre>
                    604: 
                    605:       
                    606:         <h4 class="title">
                    607: <a name="multiimage"></a>Multiple Machine (<a href="#platforms">top</a>)
                    608:   </h4>
                    609:         <p>
                    610:           NetBSD-current has infrastructure in
                    611:           <code class="code"><a href="http://cvsweb.NetBSD.org/bsdweb.cgi/src/distrib/cdrom?rev=HEAD&amp;content-type=text/x-cvsweb-markup" target="_top">src/distrib/cdrom</a></code>
                    612:           to build CDs which can boot multiple machines.
                    613:           This has been used to build a four CD set containing thirty-nine platforms,
                    614:           with eight platforms able to boot off the CDs.
                    615:           This technique requires <code class="code">mkisofs</code> version 1.15a34 or newer.    
                    616:         </p>
                    617: 
                    618:         <p>
                    619:           Alternatively, multiple machine boot CDs can be created with the
                    620:           following manual procedure.
                    621:           This procedure
                    622:           has been successfully used to create a single CD which is bootable on
                    623:           alpha, i386, pmax, and sparc.  It should be possible to also make the
                    624:           CD bootable on macppc, vax and on sun2, sun3 and sun3x.
                    625:           To create a CD which is bootable by multiple architectures, use the
                    626:           following steps in this order.  Please note that the order is critical.
                    627: 
                    628:           </p>
                    629: <div class="itemizedlist"><ul type="disc">
                    630: <li>
                    631:               <p>
                    632:                 Make sure you have all the required files including the various
                    633:                 kernels and boot programs listed in the individual machine
                    634:                 sections.
                    635:               </p>
                    636:             </li>
                    637: <li>
                    638:               <p>
                    639:                 Include a directory somewhere in the <code class="code">cdsources</code>
                    640:                 directory called <code class="code">mdec.pmax</code>
                    641:                 and include the pmax <code class="code">bootxx_cd9660</code> file there.  For example,
                    642:                 <code class="code">/cdsources/usr/mdec.pmax/bootxx_cd9660</code>.
                    643:                </p>
                    644:              </li>
                    645: <li>
                    646:                <p>
                    647:                   Include a directory somewhere in the <code class="code">cdsources</code>
                    648:                   directory called <code class="code">mdec.vax</code>
                    649:                   and include the vax <code class="code">xxboot</code> file there.  For example,
                    650:                   <code class="code">/cdsources/usr/mdec.vax/xxboot</code>.
                    651:                </p>
                    652:              </li>
                    653: <li>
                    654:                <p>
                    655:                  Include the macppc <code class="code">ofwboot.xcf</code> bootloader in <code class="code">/cdsources</code>.
                    656:                </p>
                    657:              </li>
                    658: <li>
                    659:                <p>
                    660:                  Create an i386 bootable image.
                    661: 
                    662:                  </p>
                    663: <pre class="programlisting">
                    664: sh
                    665: mkisofs -v -v -o output.iso -b i386/installation/floppy/boot-big.fs \ 
                    666:   -c boot.catalog -l -J -r -allow-leading-dots /cdsources 2&gt;&amp;1 | tee /tmp/mkisofs.log
                    667: exit</pre>
                    668: <p>
                    669: 
                    670:                  Note that the appearance of the <code class="code">-v</code> flag twice is required.  If you are
                    671:                  making a bootable CD for an Open Firmware 3 macppc model, make sure to include
                    672:                  <code class="code">-hfs -part</code> in the parameters for <code class="code">mkisofs</code>.
                    673:                </p>
                    674:              </li>
                    675: <li>
                    676:                <p>
                    677:                  Run <code class="code">mksunbootcd</code> on a NetBSD/sparc machine to install sparc
                    678:                  and sun2/sun3 bootblocks.  Alternatively, install the 
                    679:                  <a href="ftp://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc/sysutils/mksunbootcd/README.html" target="_top"><code class="filename">sysutils/mksunbootcd</code></a>
                    680:                  package on your favorite NetBSD machine.
                    681: 
                    682:                  </p>
                    683: <pre class="programlisting">mksunbootcd output.iso boot-sun4.fs boot-sun4c.fs boot-sun4m.fs boot-sun3.fs</pre>
                    684: <p>
                    685:                </p>
                    686:              </li>
                    687: <li>
                    688:                <p>
                    689:                  Run the <a href="http://netbsd.gw.com/cgi-bin/man-cgi?installboot+8+NetBSD-current">installboot(8)</a> program targeted for
                    690:                  NetBSD/pmax to install the pmax bootblocks.
                    691:                  Note that in order to coexist with other NetBSD boot blocks, the pmax
                    692:                  boot block is appended to the end of the ISO file system.
                    693: 
                    694:                  </p>
                    695: <pre class="programlisting">installboot -m pmax -v -o append,sunsum output.iso /tmp/mdec.pmax/bootxx_cd9660</pre>
                    696: <p>
                    697: 
                    698:                  The <code class="code">-o append,sunsum</code> option appends the first stage boot block to
                    699:                  the end of the ISO file system, and restores the checksum used when booting
                    700:                  on a sun.
                    701:                </p>
                    702:              </li>
                    703: <li>
                    704:                <p>
                    705:                  Run the <a href="http://netbsd.gw.com/cgi-bin/man-cgi?installboot+8+NetBSD-current">installboot(8)</a> program targeted for
                    706:                  NetBSD/vax to install the vax bootblocks.
                    707:                  Note that in order to coexist with other NetBSD boot blocks, the vax
                    708:                  boot block is appended to the end of the ISO file system.
                    709: 
                    710:                  </p>
                    711: <pre class="programlisting">installboot -m vax -v -o append,sunsum output.iso /tmp/mdec.vax/xxboot</pre>
                    712: <p>
                    713: 
                    714:                  (See the pmax entry above for an explanation of the flags).
                    715:                </p>
                    716:              </li>
                    717: <li>
                    718:                <p>
                    719:                  Run the <a href="http://netbsd.gw.com/cgi-bin/man-cgi?installboot+8+NetBSD-current">installboot(8)</a> program targeted for
                    720:                  NetBSD/alpha to install the alpha bootblocks.
                    721: 
                    722:                  </p>
                    723: <pre class="programlisting">installboot -m alpha -v -o append,sunsum output.iso /tmp/mdec.alpha/bootxx_cd9660</pre>
                    724: <p>
                    725: 
                    726:                  Note that the alpha installboot must occur after the others, because
                    727:                  currently it's the only machine dependent back-end for
                    728:                  <code class="code">installboot(8)</code> that can calculate the alpha checksum.
                    729:                  (See the pmax entry above for an explanation of the flags).
                    730:                </p>
                    731:              </li>
                    732: </ul></div>
                    733: <p>
                    734:         </p>
                    735:       <hr>
                    736: <h3 class="title">Examining the CD image</h3>
                    737:         <h4 class="title">
                    738: <a name="netbsd_mountimage"></a>Under NetBSD (<a href="#examining-the-image">top</a>)
                    739:   </h4>
                    740:         <p>
                    741:           Mount the CD image using the following:
                    742:         </p>
                    743: 
                    744:         <pre class="programlisting">
                    745: vnconfig -c vnd0 output.iso
                    746: mount -t cd9660 /dev/vnd0c /mnt</pre>
                    747: 
                    748:         <p>
                    749:           Please note that on i386 systems, you should use <code class="code">/dev/vnd0d</code> instead
                    750:           of <code class="code">/dev/vnd0c</code>.
                    751:           Now you can cd to /mnt and explore your newly created CD image.
                    752:           To unmount the image, do the following:
                    753:         </p>
                    754: 
                    755:         <pre class="programlisting">
                    756: umount /mnt 
                    757: vnconfig -u vnd0</pre>
                    758: 
                    759:       
                    760:         <h4 class="title">
                    761: <a name="linux_mountimage"></a>Under Linux (<a href="#examining-the-image">top</a>)
                    762:   </h4>
                    763:         <p>
                    764:           Linux has a similar capability.  To mount the CD image:
                    765:         </p>
                    766: 
                    767:         <pre class="programlisting">mount -t iso9660 -o ro,loop=/dev/loop0 output.iso /mnt</pre>
                    768: 
                    769:         <p>
                    770:           and to unmount the CD image:
                    771:         </p>
                    772: 
                    773:         <pre class="programlisting">umount /mnt</pre>
                    774: 
                    775:       
                    776:         <h4 class="title">
                    777: <a name="solaris_mountimage"></a>Under Solaris (<a href="#examining-the-image">top</a>)
                    778:   </h4>
                    779:         <p>
                    780:           Solaris-8 and newer is reported to be able to also mount
                    781:           the CD image.  See the <code class="code">lofiadm</code> manpage on solaris
                    782:           for more details on how to do this. 
                    783:         </p>
                    784: 
                    785:         <p>
                    786:           For older versions of Solaris, you might want to try the
                    787:           <code class="code">fbk</code> driver written by Joerg Schilling.  The <code class="code">fbk</code> driver
                    788:           is available from
                    789:           <a href="ftp://ftp.berlios.de/pub/schily/kernel/fbk/" target="_top">ftp://ftp.berlios.de/pub/schily/kernel/fbk/</a>.
                    790:           Please refer to the <code class="code">fbk</code> documentation for installation instructions.
                    791:           Once the <code class="code">fbk</code> driver is installed on your system, you can mount the ISO 9660 image
                    792:           with the following command:
                    793:         </p>
                    794: 
                    795:         <pre class="programlisting">mount -F fbk -o ro,type=hsfs /dev/fbk0:output.iso  /mnt</pre>
                    796: 
                    797:         <p>
                    798:           and to unmount the CD image:
                    799:         </p>
                    800: 
                    801:         <pre class="programlisting">umount /mnt</pre>
                    802: 
                    803:       <hr>
                    804: <h3 class="title">Burning the CD</h3>
                    805:         <h4 class="title">
                    806: <a name="cdrecord"></a>Using cdrecord (U*nix) (<a href="#burning-the-cd">top</a>)
                    807:   </h4>
                    808:         <p>
                    809:           The program <code class="code">cdrecord</code> may be used to burn the CD image to the
                    810:           CD. <code class="code">cdrecord</code> is included in the
                    811:           <a href="ftp://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc/sysutils/cdrtools/README.html" target="_top"><code class="filename">sysutils/cdrtools</code></a>
                    812:           package.
                    813:         </p>
                    814: 
                    815:         <p>
                    816:           An example of the use of <code class="code">cdrecord</code> is the following:
                    817:         </p>
                    818: 
                    819:         <pre class="programlisting">cdrecord -v speed=4 dev=/dev/cd1c output.iso</pre>
                    820: 
                    821:         <p>
                    822:           You will need to substitute the correct speed for your CD writer and
                    823:           the correct device for your system (for i386 it would be
                    824:           <code class="code">/dev/cd1d</code>).
                    825:         </p>
                    826:       
                    827:         <h4 class="title">
                    828: <a name="winrecord"></a>Under Windows (<a href="#burning-the-cd">top</a>)
                    829:   </h4>
                    830:         <p>
                    831:           There are several programs available for Windows which will write an
                    832:           ISO 9660 image to a CD.  This section is not an endorsement for any of
                    833:           these programs in particular, but is intended to at least mention some
                    834:           of the alternatives.
                    835: 
                    836:           </p>
                    837: <div class="itemizedlist"><ul type="disc">
                    838: <li>
                    839:               <p>
                    840:                 <a href="http://www.goldenhawk.com/cdrwin.htm" target="_top">CDRWIN</a>.
                    841:                 Commercial software that can create bootable (by i386) ISO 9660 images
                    842:                 and write them to CD.
                    843:               </p>
                    844:             </li>
                    845: <li>
                    846:               <p>
                    847:                 <a href="http://www.goldenhawk.com/freeware.htm" target="_top">FILE2CD</a>.
                    848:                 Freeware program which can write an ISO 9660 image to CD.
                    849:               </p>
                    850:             </li>
                    851: <li>
                    852:               <p>
                    853:                 <a href="http://www.roxio.com/en/products/ecdc/index.jhtml" target="_top">
                    854:                 Roxio Easy CD Creator</a>.  Commercial software.
                    855:               </p>
                    856:             </li>
                    857: <li>
                    858:               <p>
                    859:                 <a href="http://www.ahead.de/en/index.html" target="_top">Ahead Nero
                    860:                 Burning ROM</a>.  Commercial software.
                    861:               </p>
                    862:             </li>
                    863: <li>
                    864:                <p>
                    865:                  <a href="ftp://ftp.berlios.de/pub/cdrecord/alpha/win32/" target="_top">CDRECORD</a>.
                    866:                  Free software that can create bootable ISO 9660 images and write them to CD.
                    867:                  This does not include a graphical interface, it is command line only.
                    868:                  This depends on an ASPI driver, which is available
                    869:                  <a href="http://www.adaptec.com/worldwide/support/driverdetail.jsp?cat=%2fProduct%2fASPI-4.70&amp;filekey=aspi_v470.exe" target="_top">here</a>.
                    870:                  For IDE drives you will need to modify your registry:
                    871:                </p>
                    872: 
                    873:                <pre class="programlisting">
                    874: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ASPI32]  
                    875: "ErrorControl"=dword:00000001  
                    876: "Start"=dword:00000001  
                    877: "Type"=dword:00000001  
                    878: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ASPI32\Parameters]  
                    879: "ExcludeMiniports"=""</pre>
                    880: 
                    881:             </li>
                    882: </ul></div>
                    883: <p>
                    884:         </p>
                    885:       
                    886:         <h4 class="title">
                    887: <a name="macrecord"></a>Under Mac OS (<a href="#burning-the-cd">top</a>)
                    888:   </h4>
                    889:         <p>
                    890:           On Mac OS X, the program <span><strong class="command">hdiutil</strong></span> may be used to burn the
                    891:           ISO image to the CD.
                    892:         </p>
                    893: 
                    894:         <p>
                    895:           An example of the use of <span><strong class="command">hdiutil</strong></span> is the following:
                    896:         </p>
                    897: 
                    898:         <pre class="programlisting">hdiutil burn output.iso -verbose -noverifyburn</pre>
                    899: 
                    900:         <p>
                    901:           You may need to use additional options which are documented in the
                    902:           hdiutil <a href="http://developer.apple.com/documentation/Darwin/Reference/ManPages/man1/hdiutil.1.html" target="_top">documentation</a>.
                    903:         </p>
                    904: 
                    905:         <p>
                    906:           There are also several other programs available for Mac OS which will write an
                    907:           ISO 9660 image to a CD.  This section is not an endorsement for any of
                    908:           these programs in particular, but is intended to at least mention some
                    909:           of the alternatives.
                    910:         </p>
                    911: 
                    912:         <div class="itemizedlist"><ul type="disc"><li>
                    913:             <p>
                    914:               <a href="http://www.roxio.com/en/products/toast/index.jhtml" target="_top">Roxio
                    915:               Toast</a>.  Commercial software.
                    916:             </p>
                    917:           </li></ul></div>
                    918:       <div class="navfoot">
                    919: <hr>
                    920: <table border="0" summary="Footer navigation"><tr>
                    921: <td class="foothome"><span class="foothome"><a href="../."><img src="/images/NetBSD-flag.png" alt="[NetBSD flag]" border="0" width="90" height="90"></a></span></td>
                    922: <td class="foothome">
                    923: <span class="foothome"><a href="../.">Home page</a></span><br>
                    924: </td>
                    925: </tr></table>
                    926: <hr>
                    927: </div>
                    928: <p></p>
                    929: <span class="footfeed"><a href="http://www.NetBSD.org/cgi-bin/feedback.cgi">(contact us)</a></span>
                    930: 
                    931:    
1.2     ! dsieger   932:   <span class="foottag">Generated from <em>%NetBSD: bootcd.xml,v 1.2 2007/06/09 18:11:04 dsieger Exp %</em></span><br><span class="footcopy"><a href="/Misc/disclaimer.html"><span class="copyright">Copyright © 1994-2007 The NetBSD Foundation, Inc. </span>ALL RIGHTS RESERVED.<br>NetBSD<sup>®</sup> is a registered trademark of The NetBSD
1.1       dsieger   933:        Foundation, Inc.</a></span>
                    934: </div></body>
                    935: </html>

CVSweb <webmaster@jp.NetBSD.org>