/* $NetBSD: init_main.c,v 1.437.2.2 2012/02/24 09:11:44 mrg Exp $ */ /*- * Copyright (c) 2008, 2009 The NetBSD Foundation, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1982, 1986, 1989, 1991, 1992, 1993 * The Regents of the University of California. All rights reserved. * (c) UNIX System Laboratories, Inc. * All or some portions of this file are derived from material licensed * to the University of California by American Telephone and Telegraph * Co. or Unix System Laboratories, Inc. and are reproduced herein with * the permission of UNIX System Laboratories, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)init_main.c 8.16 (Berkeley) 5/14/95 */ /* * Copyright (c) 1995 Christopher G. Demetriou. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)init_main.c 8.16 (Berkeley) 5/14/95 */ #include __KERNEL_RCSID(0, "$NetBSD: init_main.c,v 1.437.2.2 2012/02/24 09:11:44 mrg Exp $"); #include "opt_ddb.h" #include "opt_ipsec.h" #include "opt_modular.h" #include "opt_ntp.h" #include "opt_pipe.h" #include "opt_syscall_debug.h" #include "opt_sysv.h" #include "opt_fileassoc.h" #include "opt_ktrace.h" #include "opt_pax.h" #include "opt_compat_netbsd.h" #include "opt_wapbl.h" #include "opt_ptrace.h" #include "drvctl.h" #include "ksyms.h" #include "sysmon_envsys.h" #include "sysmon_power.h" #include "sysmon_taskq.h" #include "sysmon_wdog.h" #include "veriexec.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef FAST_IPSEC #include #endif #ifdef SYSVSHM #include #endif #ifdef SYSVSEM #include #endif #ifdef SYSVMSG #include #endif #include #include #include #include #if NVERIEXEC > 0 #include #endif /* NVERIEXEC > 0 */ #ifdef KTRACE #include #endif #include #include #ifdef PTRACE #include #endif /* PTRACE */ #include #include #include #if defined(PAX_MPROTECT) || defined(PAX_SEGVGUARD) || defined(PAX_ASLR) #include #endif /* PAX_MPROTECT || PAX_SEGVGUARD || PAX_ASLR */ #include #include #include #include #include #include #include /* extern struct uvm uvm */ #if NSYSMON_TASKQ > 0 #include #endif #include #if NSYSMON_ENVSYS > 0 || NSYSMON_POWER > 0 || NSYSMON_WDOG > 0 #include #endif #include #include #include #include #ifdef COMPAT_50 #include struct timeval50 boottime50; #endif #include extern struct lwp lwp0; extern time_t rootfstime; #ifndef curlwp struct lwp *curlwp = &lwp0; #endif struct proc *initproc; struct vnode *rootvp, *swapdev_vp; int boothowto; int cold = 1; /* still working on startup */ struct timespec boottime; /* time at system startup - will only follow settime deltas */ int start_init_exec; /* semaphore for start_init() */ cprng_strong_t *kern_cprng; static void check_console(struct lwp *l); static void start_init(void *); static void configure(void); static void configure2(void); static void configure3(void); void main(void); /* * System startup; initialize the world, create process 0, mount root * filesystem, and fork to create init and pagedaemon. Most of the * hard work is done in the lower-level initialization routines including * startup(), which does memory initialization and autoconfiguration. */ void main(void) { struct timespec time; struct lwp *l; struct proc *p; int s, error; #ifdef NVNODE_IMPLICIT int usevnodes; #endif CPU_INFO_ITERATOR cii; struct cpu_info *ci; l = &lwp0; #ifndef LWP0_CPU_INFO l->l_cpu = curcpu(); #endif l->l_pflag |= LP_RUNNING; /* * Attempt to find console and initialize * in case of early panic or other messages. */ consinit(); kernel_lock_init(); once_init(); mi_cpu_init(); kernconfig_lock_init(); kthread_sysinit(); /* Initialize the device switch tables. */ devsw_init(); /* Initialize event counters. */ evcnt_init(); uvm_init(); kcpuset_sysinit(); prop_kern_init(); #if ((NKSYMS > 0) || (NDDB > 0) || (NMODULAR > 0)) ksyms_init(); #endif kprintf_init(); percpu_init(); /* Initialize lock caches. */ mutex_obj_init(); rw_obj_init(); /* Passive serialization. */ pserialize_init(); /* Initialize the extent manager. */ extent_init(); /* Do machine-dependent initialization. */ cpu_startup(); /* Initialize the sysctl subsystem. */ sysctl_init(); /* Initialize callouts, part 1. */ callout_startup(); /* Initialize the kernel authorization subsystem. */ kauth_init(); secmodel_init(); spec_init(); /* * Set BPF op vector. Can't do this in bpf attach, since * network drivers attach before bpf. */ bpf_setops(); /* Start module system. */ module_init(); /* * Initialize the kernel authorization subsystem and start the * default security model, if any. We need to do this early * enough so that subsystems relying on any of the aforementioned * can work properly. Since the security model may dictate the * credential inheritance policy, it is needed at least before * any process is created, specifically proc0. */ module_init_class(MODULE_CLASS_SECMODEL); /* Initialize the buffer cache */ bufinit(); /* Initialize sockets. */ soinit(); /* * The following things must be done before autoconfiguration. */ rnd_init(); /* initialize entropy pool */ cprng_init(); /* initialize cryptographic PRNG */ /* Initialize process and pgrp structures. */ procinit(); lwpinit(); /* Initialize signal-related data structures. */ signal_init(); /* Initialize resource management. */ resource_init(); /* Create process 0. */ proc0_init(); lwp0_init(); /* Disable preemption during boot. */ kpreempt_disable(); /* Initialize the UID hash table. */ uid_init(); /* Charge root for one process. */ (void)chgproccnt(0, 1); /* Initialize timekeeping. */ time_init(); /* Initialize the run queues, turnstiles and sleep queues. */ sched_rqinit(); turnstile_init(); sleeptab_init(&sleeptab); sched_init(); /* Initialize processor-sets */ psets_init(); /* Initialize cpufreq(9) */ cpufreq_init(); /* MI initialization of the boot cpu */ error = mi_cpu_attach(curcpu()); KASSERT(error == 0); /* Initialize timekeeping, part 2. */ time_init2(); /* * Initialize mbuf's. Do this now because we might attempt to * allocate mbufs or mbuf clusters during autoconfiguration. */ mbinit(); /* Initialize I/O statistics. */ iostat_init(); /* Initialize the log device. */ loginit(); /* Second part of module system initialization. */ module_start_unload_thread(); /* Initialize the file systems. */ #ifdef NVNODE_IMPLICIT /* * If maximum number of vnodes in namei vnode cache is not explicitly * defined in kernel config, adjust the number such as we use roughly * 10% of memory for vnodes and associated data structures in the * assumed worst case. Do not provide fewer than NVNODE vnodes. */ usevnodes = calc_cache_size(kernel_map, 10, VNODE_VA_MAXPCT) / VNODE_COST; if (usevnodes > desiredvnodes) desiredvnodes = usevnodes; #endif vfsinit(); lf_init(); /* Initialize fstrans. */ fstrans_init(); /* Initialize the file descriptor system. */ fd_sys_init(); /* Initialize cwd structures */ cwd_sys_init(); /* Initialize kqueue. */ kqueue_init(); /* Initialize the system monitor subsystems. */ #if NSYSMON_TASKQ > 0 sysmon_task_queue_preinit(); #endif #if NSYSMON_ENVSYS > 0 sysmon_envsys_init(); #endif #if NSYSMON_POWER > 0 sysmon_power_init(); #endif #if NSYSMON_WDOG > 0 sysmon_wdog_init(); #endif inittimecounter(); ntp_init(); /* Initialize tty subsystem. */ tty_init(); ttyldisc_init(); /* Initialize the buffer cache, part 2. */ bufinit2(); /* Initialize the disk wedge subsystem. */ dkwedge_init(); /* Initialize the kernel strong PRNG. */ kern_cprng = cprng_strong_create("kernel", IPL_VM, CPRNG_INIT_ANY|CPRNG_REKEY_ANY); /* Initialize interfaces. */ ifinit1(); spldebug_start(); /* Initialize sockets thread(s) */ soinit1(); /* Configure the system hardware. This will enable interrupts. */ configure(); ssp_init(); ubc_init(); /* must be after autoconfig */ mm_init(); configure2(); /* Now timer is working. Enable preemption. */ kpreempt_enable(); #ifdef SYSVSHM /* Initialize System V style shared memory. */ shminit(); #endif vmem_rehash_start(); /* must be before exec_init */ /* Initialize exec structures */ exec_init(1); /* seminit calls exithook_establish() */ #ifdef SYSVSEM /* Initialize System V style semaphores. */ seminit(); #endif #ifdef SYSVMSG /* Initialize System V style message queues. */ msginit(); #endif #if NVERIEXEC > 0 /* * Initialise the Veriexec subsystem. */ veriexec_init(); #endif /* NVERIEXEC > 0 */ #if defined(PAX_MPROTECT) || defined(PAX_SEGVGUARD) || defined(PAX_ASLR) pax_init(); #endif /* PAX_MPROTECT || PAX_SEGVGUARD || PAX_ASLR */ #ifdef FAST_IPSEC /* Attach network crypto subsystem */ ipsec_attach(); #endif /* * Initialize protocols. Block reception of incoming packets * until everything is ready. */ s = splnet(); ifinit(); domaininit(true); if_attachdomain(); splx(s); #ifdef GPROF /* Initialize kernel profiling. */ kmstartup(); #endif /* Initialize system accounting. */ acct_init(); #ifndef PIPE_SOCKETPAIR /* Initialize pipes. */ pipe_init(); #endif #ifdef KTRACE /* Initialize ktrace. */ ktrinit(); #endif #ifdef PTRACE /* Initialize ptrace. */ ptrace_init(); #endif /* PTRACE */ /* Initialize the UUID system calls. */ uuid_init(); machdep_init(); procinit_sysctl(); /* * Create process 1 (init(8)). We do this now, as Unix has * historically had init be process 1, and changing this would * probably upset a lot of people. * * Note that process 1 won't immediately exec init(8), but will * wait for us to inform it that the root file system has been * mounted. */ if (fork1(l, 0, SIGCHLD, NULL, 0, start_init, NULL, NULL, &initproc)) panic("fork init"); /* * Load any remaining builtin modules, and hand back temporary * storage to the VM system. Then require force when loading any * remaining un-init'ed built-in modules to avoid later surprises. */ module_init_class(MODULE_CLASS_ANY); module_builtin_require_force(); /* * Finalize configuration now that all real devices have been * found. This needs to be done before the root device is * selected, since finalization may create the root device. */ config_finalize(); sysctl_finalize(); /* * Now that autoconfiguration has completed, we can determine * the root and dump devices. */ cpu_rootconf(); cpu_dumpconf(); /* Mount the root file system. */ do { domountroothook(root_device); if ((error = vfs_mountroot())) { printf("cannot mount root, error = %d\n", error); boothowto |= RB_ASKNAME; setroot(root_device, (rootdev != NODEV) ? DISKPART(rootdev) : 0); } } while (error != 0); mountroothook_destroy(); configure3(); /* * Initialise the time-of-day clock, passing the time recorded * in the root filesystem (if any) for use by systems that * don't have a non-volatile time-of-day device. */ inittodr(rootfstime); /* * Now can look at time, having had a chance to verify the time * from the file system. Reset l->l_rtime as it may have been * munched in mi_switch() after the time got set. */ getnanotime(&time); boottime = time; #ifdef COMPAT_50 { struct timeval tv; TIMESPEC_TO_TIMEVAL(&tv, &time); timeval_to_timeval50(&tv, &boottime50); } #endif mutex_enter(proc_lock); LIST_FOREACH(p, &allproc, p_list) { KASSERT((p->p_flag & PK_MARKER) == 0); mutex_enter(p->p_lock); TIMESPEC_TO_TIMEVAL(&p->p_stats->p_start, &time); LIST_FOREACH(l, &p->p_lwps, l_sibling) { lwp_lock(l); memset(&l->l_rtime, 0, sizeof(l->l_rtime)); lwp_unlock(l); } mutex_exit(p->p_lock); } mutex_exit(proc_lock); binuptime(&curlwp->l_stime); for (CPU_INFO_FOREACH(cii, ci)) { ci->ci_schedstate.spc_lastmod = time_second; } /* Create the pageout daemon kernel thread. */ uvm_swap_init(); if (kthread_create(PRI_PGDAEMON, KTHREAD_MPSAFE, NULL, uvm_pageout, NULL, NULL, "pgdaemon")) panic("fork pagedaemon"); /* Create the filesystem syncer kernel thread. */ if (kthread_create(PRI_IOFLUSH, KTHREAD_MPSAFE, NULL, sched_sync, NULL, NULL, "ioflush")) panic("fork syncer"); /* Create the aiodone daemon kernel thread. */ if (workqueue_create(&uvm.aiodone_queue, "aiodoned", uvm_aiodone_worker, NULL, PRI_VM, IPL_NONE, WQ_MPSAFE)) panic("fork aiodoned"); /* * Okay, now we can let init(8) exec! It's off to userland! */ mutex_enter(proc_lock); start_init_exec = 1; cv_broadcast(&lbolt); mutex_exit(proc_lock); /* The scheduler is an infinite loop. */ uvm_scheduler(); /* NOTREACHED */ } /* * Configure the system's hardware. */ static void configure(void) { /* Initialize autoconf data structures. */ config_init_mi(); /* * XXX * callout_setfunc() requires mutex(9) so it can't be in config_init() * on amiga and atari which use config_init() and autoconf(9) fucntions * to initialize console devices. */ config_twiddle_init(); pmf_init(); #if NDRVCTL > 0 drvctl_init(); #endif userconf_init(); if (boothowto & RB_USERCONF) userconf_prompt(); if ((boothowto & (AB_SILENT|AB_VERBOSE)) == AB_SILENT) { printf_nolog("Detecting hardware..."); } /* * Do the machine-dependent portion of autoconfiguration. This * sets the configuration machinery here in motion by "finding" * the root bus. When this function returns, we expect interrupts * to be enabled. */ cpu_configure(); } static void configure2(void) { CPU_INFO_ITERATOR cii; struct cpu_info *ci; int s; /* * Now that we've found all the hardware, start the real time * and statistics clocks. */ initclocks(); cold = 0; /* clocks are running, we're warm now! */ s = splsched(); curcpu()->ci_schedstate.spc_flags |= SPCF_RUNNING; splx(s); /* Boot the secondary processors. */ for (CPU_INFO_FOREACH(cii, ci)) { uvm_cpu_attach(ci); } mp_online = true; #if defined(MULTIPROCESSOR) cpu_boot_secondary_processors(); #endif /* Setup the runqueues and scheduler. */ runq_init(); synch_init(); /* * Bus scans can make it appear as if the system has paused, so * twiddle constantly while config_interrupts() jobs are running. */ config_twiddle_fn(NULL); /* * Create threads to call back and finish configuration for * devices that want interrupts enabled. */ config_create_interruptthreads(); /* Get the threads going and into any sleeps before continuing. */ yield(); } static void configure3(void) { /* * Create threads to call back and finish configuration for * devices that want the mounted root file system. */ config_create_mountrootthreads(); /* Get the threads going and into any sleeps before continuing. */ yield(); } static void check_console(struct lwp *l) { struct vnode *vp; int error; error = namei_simple_kernel("/dev/console", NSM_FOLLOW_NOEMULROOT, &vp); if (error == 0) vrele(vp); else if (error == ENOENT) printf("warning: no /dev/console\n"); else printf("warning: lookup /dev/console: error %d\n", error); } /* * List of paths to try when searching for "init". */ static const char * const initpaths[] = { "/sbin/init", "/sbin/oinit", "/sbin/init.bak", NULL, }; /* * Start the initial user process; try exec'ing each pathname in "initpaths". * The program is invoked with one argument containing the boot flags. */ static void start_init(void *arg) { struct lwp *l = arg; struct proc *p = l->l_proc; vaddr_t addr; struct sys_execve_args /* { syscallarg(const char *) path; syscallarg(char * const *) argp; syscallarg(char * const *) envp; } */ args; int options, i, error; register_t retval[2]; char flags[4], *flagsp; const char *path, *slash; char *ucp, **uap, *arg0, *arg1 = NULL; char ipath[129]; int ipx, len; /* * Now in process 1. */ strncpy(p->p_comm, "init", MAXCOMLEN); /* * Wait for main() to tell us that it's safe to exec. */ mutex_enter(proc_lock); while (start_init_exec == 0) cv_wait(&lbolt, proc_lock); mutex_exit(proc_lock); /* * This is not the right way to do this. We really should * hand-craft a descriptor onto /dev/console to hand to init, * but that's a _lot_ more work, and the benefit from this easy * hack makes up for the "good is the enemy of the best" effect. */ check_console(l); /* * Need just enough stack to hold the faked-up "execve()" arguments. */ addr = (vaddr_t)STACK_ALLOC(USRSTACK, PAGE_SIZE); if (uvm_map(&p->p_vmspace->vm_map, &addr, PAGE_SIZE, NULL, UVM_UNKNOWN_OFFSET, 0, UVM_MAPFLAG(UVM_PROT_ALL, UVM_PROT_ALL, UVM_INH_COPY, UVM_ADV_NORMAL, UVM_FLAG_FIXED|UVM_FLAG_OVERLAY|UVM_FLAG_COPYONW)) != 0) panic("init: couldn't allocate argument space"); p->p_vmspace->vm_maxsaddr = (void *)STACK_MAX(addr, PAGE_SIZE); ipx = 0; while (1) { if (boothowto & RB_ASKNAME) { printf("init path"); if (initpaths[ipx]) printf(" (default %s)", initpaths[ipx]); printf(": "); len = cngetsn(ipath, sizeof(ipath)-1); if (len == 4 && strcmp(ipath, "halt") == 0) { cpu_reboot(RB_HALT, NULL); } else if (len == 6 && strcmp(ipath, "reboot") == 0) { cpu_reboot(0, NULL); #if defined(DDB) } else if (len == 3 && strcmp(ipath, "ddb") == 0) { console_debugger(); continue; #endif } else if (len > 0 && ipath[0] == '/') { ipath[len] = '\0'; path = ipath; } else if (len == 0 && initpaths[ipx] != NULL) { path = initpaths[ipx++]; } else { printf("use absolute path, "); #if defined(DDB) printf("\"ddb\", "); #endif printf("\"halt\", or \"reboot\"\n"); continue; } } else { if ((path = initpaths[ipx++]) == NULL) { ipx = 0; boothowto |= RB_ASKNAME; continue; } } ucp = (char *)USRSTACK; /* * Construct the boot flag argument. */ flagsp = flags; *flagsp++ = '-'; options = 0; if (boothowto & RB_SINGLE) { *flagsp++ = 's'; options = 1; } #ifdef notyet if (boothowto & RB_FASTBOOT) { *flagsp++ = 'f'; options = 1; } #endif /* * Move out the flags (arg 1), if necessary. */ if (options != 0) { *flagsp++ = '\0'; i = flagsp - flags; #ifdef DEBUG aprint_normal("init: copying out flags `%s' %d\n", flags, i); #endif arg1 = STACK_ALLOC(ucp, i); ucp = STACK_MAX(arg1, i); (void)copyout((void *)flags, arg1, i); } /* * Move out the file name (also arg 0). */ i = strlen(path) + 1; #ifdef DEBUG aprint_normal("init: copying out path `%s' %d\n", path, i); #else if (boothowto & RB_ASKNAME || path != initpaths[0]) printf("init: trying %s\n", path); #endif arg0 = STACK_ALLOC(ucp, i); ucp = STACK_MAX(arg0, i); (void)copyout(path, arg0, i); /* * Move out the arg pointers. */ ucp = (void *)STACK_ALIGN(ucp, STACK_ALIGNBYTES); uap = (char **)STACK_ALLOC(ucp, sizeof(char *) * 3); SCARG(&args, path) = arg0; SCARG(&args, argp) = uap; SCARG(&args, envp) = NULL; slash = strrchr(path, '/'); if (slash) (void)suword((void *)uap++, (long)arg0 + (slash + 1 - path)); else (void)suword((void *)uap++, (long)arg0); if (options != 0) (void)suword((void *)uap++, (long)arg1); (void)suword((void *)uap++, 0); /* terminator */ /* * Now try to exec the program. If can't for any reason * other than it doesn't exist, complain. */ error = sys_execve(l, &args, retval); if (error == 0 || error == EJUSTRETURN) { KERNEL_UNLOCK_LAST(l); return; } printf("exec %s: error %d\n", path, error); } printf("init: not found\n"); panic("no init"); } /* * calculate cache size (in bytes) from physmem and vm_map size. */ vaddr_t calc_cache_size(struct vm_map *map, int pct, int va_pct) { paddr_t t; /* XXX should consider competing cache if any */ /* XXX should consider submaps */ t = (uintmax_t)physmem * pct / 100 * PAGE_SIZE; if (map != NULL) { vsize_t vsize; vsize = vm_map_max(map) - vm_map_min(map); vsize = (uintmax_t)vsize * va_pct / 100; if (t > vsize) { t = vsize; } } return t; } /* * Print the system start up banner. * * - Print a limited banner if AB_SILENT. * - Always send normal banner to the log. */ #define MEM_PBUFSIZE sizeof("99999 MB") void banner(void) { static char notice[] = " Notice: this software is " "protected by copyright"; char pbuf[81]; void (*pr)(const char *, ...); int i; if ((boothowto & AB_SILENT) != 0) { snprintf(pbuf, sizeof(pbuf), "%s %s (%s)", ostype, osrelease, kernel_ident); printf_nolog("%s", pbuf); for (i = 80 - strlen(pbuf) - sizeof(notice); i > 0; i--) printf(" "); printf_nolog("%s\n", notice); pr = aprint_normal; } else { pr = printf; } memset(pbuf, 0, sizeof(pbuf)); (*pr)("%s%s", copyright, version); format_bytes(pbuf, MEM_PBUFSIZE, ctob((uint64_t)physmem)); (*pr)("total memory = %s\n", pbuf); format_bytes(pbuf, MEM_PBUFSIZE, ctob((uint64_t)uvmexp.free)); (*pr)("avail memory = %s\n", pbuf); }