/* $NetBSD: usbnet.h,v 1.33 2022/03/03 05:56:51 riastradh Exp $ */ /* * Copyright (c) 2019 Matthew R. Green * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef _DEV_USB_USBNET_H #define _DEV_USB_USBNET_H /* * Common code/data shared by all USB ethernet drivers (using these routines.) * * This framework provides the following features for USB ethernet drivers: * * - USB endpoint pipe handling * - rx and tx chain handling * - generic handlers or support for several struct ifnet callbacks * - MII bus locking * - interrupt handling * - partial autoconf handling * * Consumers of this interface need to: * * - replace most softc members with "struct usbnet" usage, in particular * use usbnet pointer for ifp->if_softc, and device_private (real softc * can be stored in un_sc member) * - use MII bus lock / access methods * - usbnet_attach() to initialise and allocate rx/tx chains * - usbnet_attach_ifp() to attach the interface, and either ether_ifattach() * for ethernet devices, or if_alloc_sadl()/bpf_attach() pair otherwise. * - usbnet_detach() to clean them up * - usbnet_activate() for autoconf * - interface ioctl and start have direct frontends with callbacks for * device specific handling: * - ioctl can use either a device-specific override (useful for special * cases), but provides a normal handler with callback to handle * ENETRESET conditions that should be sufficient for most users * - start uses usbnet transmit prepare callback (uno_tx_prepare) * - interrupt handling: * - for rx, usbnet will enable the receive pipes and * call the rx_loop callback to handle device specific processing of * packets, which can use usbnet_enqueue() to provide data to the * higher layers * - for tx, usbnet will pull entries out of the * transmit queue and use the transmit prepare callback (uno_tx_prepare) * for the given mbuf. the usb callback will use usbnet_txeof() for * the transmit completion function (internal to usbnet) * - there is special interrupt pipe handling * - timer/tick: * - the uno_tick callback will be called once a second if present. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * Per-transfer data. * * Front-end must set un_rx_list_cnt and un_tx_list_cnt before * calling usbnet_attach(), and then call usbnet_rx_tx_init() * which will allocate the chain arrays, and must be NULL to * indicate the first call. */ struct usbnet; struct usbnet_chain { struct usbnet *unc_un; struct usbd_xfer *unc_xfer; uint8_t *unc_buf; }; /* * Extend this as necessary. axe(4) claims to want 6 total, but * does not implement them. */ enum usbnet_ep { USBNET_ENDPT_RX, USBNET_ENDPT_TX, USBNET_ENDPT_INTR, USBNET_ENDPT_MAX, }; /* Interface stop callback. */ typedef void (*usbnet_stop_cb)(struct ifnet *, int); /* Interface ioctl callback. */ typedef int (*usbnet_ioctl_cb)(struct ifnet *, u_long, void *); /* Reprogram multicast filters callback. */ typedef void (*usbnet_mcast_cb)(struct ifnet *); /* Initialise device callback. */ typedef int (*usbnet_init_cb)(struct ifnet *); /* MII read register callback. */ typedef int (*usbnet_mii_read_reg_cb)(struct usbnet *, int reg, int phy, uint16_t *val); /* MII write register callback. */ typedef int (*usbnet_mii_write_reg_cb)(struct usbnet *, int reg, int phy, uint16_t val); /* MII status change callback. */ typedef void (*usbnet_mii_statchg_cb)(struct ifnet *); /* Prepare packet to send callback, returns length. */ typedef unsigned (*usbnet_tx_prepare_cb)(struct usbnet *, struct mbuf *, struct usbnet_chain *); /* Receive some packets callback. */ typedef void (*usbnet_rx_loop_cb)(struct usbnet *, struct usbnet_chain *, uint32_t); /* Tick callback. */ typedef void (*usbnet_tick_cb)(struct usbnet *); /* Interrupt pipe callback. */ typedef void (*usbnet_intr_cb)(struct usbnet *, usbd_status); /* * LOCKING * ======= * * The following annotations indicate which locks are held when * usbnet_ops functions are invoked: * * I -> IFNET_LOCK (if_ioctl_lock) * C -> CORE_LOCK (usbnet core_lock) * T -> TX_LOCK (usbnet tx_lock) * R -> RX_LOCK (usbnet rx_lock) * n -> no locks held * * Note that when CORE_LOCK is held, IFNET_LOCK may or may not also * be held. * * Note that the IFNET_LOCK **may not be held** for the ioctl commands * SIOCADDMULTI/SIOCDELMULTI. These commands are only passed * explicitly to uno_override_ioctl; for all other devices, they are * handled by uno_mcast (also without IFNET_LOCK). */ struct usbnet_ops { usbnet_stop_cb uno_stop; /* C */ usbnet_ioctl_cb uno_ioctl; /* I */ usbnet_ioctl_cb uno_override_ioctl; /* I (except mcast) */ usbnet_mcast_cb uno_mcast; /* I */ usbnet_init_cb uno_init; /* I */ usbnet_mii_read_reg_cb uno_read_reg; /* C */ usbnet_mii_write_reg_cb uno_write_reg; /* C */ usbnet_mii_statchg_cb uno_statchg; /* C */ usbnet_tx_prepare_cb uno_tx_prepare; /* T */ usbnet_rx_loop_cb uno_rx_loop; /* R */ usbnet_tick_cb uno_tick; /* n */ usbnet_intr_cb uno_intr; /* n */ }; /* * USB interrupt pipe support. Use this if usbd_open_pipe_intr() should * be used for the interrupt pipe. */ struct usbnet_intr { /* * Point un_intr to this structure to use usbd_open_pipe_intr() not * usbd_open_pipe() for USBNET_ENDPT_INTR, with this buffer, size, * and interval. */ void *uni_buf; unsigned uni_bufsz; unsigned uni_interval; }; /* * Structure to setup MII. Use the USBNET_MII_DECL_DEFAULT() macro for * sane default. Pass a copy to usbnet_attach_ifp(). Not used * after the usbnet_attach_ifp() function returns. */ struct usbnet_mii { int un_mii_flags; int un_mii_capmask; int un_mii_phyloc; int un_mii_offset; }; #define USBNET_MII_DECL(name, capmask, loc, off, flags) \ struct usbnet_mii name = { \ .un_mii_capmask = capmask, \ .un_mii_phyloc = loc, \ .un_mii_offset = off, \ .un_mii_flags = flags, \ } #define USBNET_MII_DECL_DEFAULT(name) \ USBNET_MII_DECL(name, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY, 0) /* * Generic USB ethernet structure. Use this as ifp->if_softc and set as * device_private() in attach unless already using struct usbnet here. * * Devices without MII should call usbnet_attach_ifp() with have_mii set * to true, and should ensure that the un_statchg_cb callback sets the * un_link member. Devices without MII have this forced to true. */ struct usbnet_private; struct usbnet { /* * This section should be filled in before calling * usbnet_attach(). */ void *un_sc; /* real softc */ device_t un_dev; struct usbd_interface *un_iface; struct usbd_device *un_udev; const struct usbnet_ops *un_ops; struct usbnet_intr *un_intr; /* Inputs for rx/tx chain control. */ unsigned un_rx_bufsz; unsigned un_tx_bufsz; unsigned un_rx_list_cnt; unsigned un_tx_list_cnt; int un_rx_xfer_flags; int un_tx_xfer_flags; /* * This section should be filled in before calling * usbnet_attach_ifp(). */ uByte un_ed[USBNET_ENDPT_MAX]; /* MII specific. Not used without MII. */ int un_phyno; /* Ethernet specific. All zeroes indicates non-Ethernet. */ uint8_t un_eaddr[ETHER_ADDR_LEN]; /* * This section is for driver to use, not touched by usbnet. */ unsigned un_flags; /* * This section is private to usbnet. Don't touch. */ struct usbnet_private *un_pri; }; /* Various accessors. */ void usbnet_set_link(struct usbnet *, bool); struct ifnet *usbnet_ifp(struct usbnet *); struct ethercom *usbnet_ec(struct usbnet *); struct mii_data *usbnet_mii(struct usbnet *); krndsource_t *usbnet_rndsrc(struct usbnet *); void *usbnet_softc(struct usbnet *); bool usbnet_havelink(struct usbnet *); bool usbnet_isdying(struct usbnet *); /* * Endpoint / rx/tx chain management: * * 1. usbnet_attach() initialises usbnet and allocates rx and tx chains * * 2. On if_init, usbnet: * - calls uno_init to initialize hardware * - open pipes * - initialises the rx/tx chains for use * - calls uno_mcast to program hardware multicast filter * * 3. On if_stop, usbnet: * - stops pipes * - calls uno_stop to stop hardware (unless we're detaching anyway) * - cleans (not frees) rx/tx chains * - closes pipes * * usbnet_detach() frees the rx/tx chains * * Setup un_ed[] with valid end points before calling usbnet_attach(). */ /* interrupt handling */ void usbnet_enqueue(struct usbnet * const, uint8_t *, size_t, int, uint32_t, int); void usbnet_input(struct usbnet * const, uint8_t *, size_t); /* autoconf */ void usbnet_attach(struct usbnet *); void usbnet_attach_ifp(struct usbnet *, unsigned, unsigned, const struct usbnet_mii *); int usbnet_detach(device_t, int); int usbnet_activate(device_t, devact_t); /* module hook up */ #ifdef _MODULE #define USBNET_INIT(name) \ error = config_init_component(cfdriver_ioconf_##name, \ cfattach_ioconf_##name, cfdata_ioconf_##name); #define USBNET_FINI(name) \ error = config_fini_component(cfdriver_ioconf_##name, \ cfattach_ioconf_##name, cfdata_ioconf_##name); #else #define USBNET_INIT(name) #define USBNET_FINI(name) #endif #define USBNET_MODULE(name) \ \ MODULE(MODULE_CLASS_DRIVER, if_##name, "usbnet"); \ \ static int \ if_##name##_modcmd(modcmd_t cmd, void *aux) \ { \ int error = 0; \ \ switch (cmd) { \ case MODULE_CMD_INIT: \ USBNET_INIT(name) \ return error; \ case MODULE_CMD_FINI: \ USBNET_FINI(name) \ return error; \ default: \ return ENOTTY; \ } \ } #endif /* _DEV_USB_USBNET_H */