/* $NetBSD: rf_netbsdkintf.c,v 1.48 2000/02/13 04:53:57 oster Exp $ */ /*- * Copyright (c) 1996, 1997, 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Greg Oster; Jason R. Thorpe. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1988 University of Utah. * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: Utah $Hdr: cd.c 1.6 90/11/28$ * * @(#)cd.c 8.2 (Berkeley) 11/16/93 */ /* * Copyright (c) 1995 Carnegie-Mellon University. * All rights reserved. * * Authors: Mark Holland, Jim Zelenka * * Permission to use, copy, modify and distribute this software and * its documentation is hereby granted, provided that both the copyright * notice and this permission notice appear in all copies of the * software, derivative works or modified versions, and any portions * thereof, and that both notices appear in supporting documentation. * * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. * * Carnegie Mellon requests users of this software to return to * * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU * School of Computer Science * Carnegie Mellon University * Pittsburgh PA 15213-3890 * * any improvements or extensions that they make and grant Carnegie the * rights to redistribute these changes. */ /*********************************************************** * * rf_kintf.c -- the kernel interface routines for RAIDframe * ***********************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "raid.h" #include "rf_raid.h" #include "rf_raidframe.h" #include "rf_copyback.h" #include "rf_dag.h" #include "rf_dagflags.h" #include "rf_diskqueue.h" #include "rf_acctrace.h" #include "rf_etimer.h" #include "rf_general.h" #include "rf_debugMem.h" #include "rf_kintf.h" #include "rf_options.h" #include "rf_driver.h" #include "rf_parityscan.h" #include "rf_debugprint.h" #include "rf_threadstuff.h" int rf_kdebug_level = 0; #ifdef DEBUG #define db1_printf(a) if (rf_kdebug_level > 0) printf a #else /* DEBUG */ #define db1_printf(a) { } #endif /* DEBUG */ static RF_Raid_t **raidPtrs; /* global raid device descriptors */ RF_DECLARE_STATIC_MUTEX(rf_sparet_wait_mutex) static RF_SparetWait_t *rf_sparet_wait_queue; /* requests to install a * spare table */ static RF_SparetWait_t *rf_sparet_resp_queue; /* responses from * installation process */ /* prototypes */ static void KernelWakeupFunc(struct buf * bp); static void InitBP(struct buf * bp, struct vnode *, unsigned rw_flag, dev_t dev, RF_SectorNum_t startSect, RF_SectorCount_t numSect, caddr_t buf, void (*cbFunc) (struct buf *), void *cbArg, int logBytesPerSector, struct proc * b_proc); static int raidinit __P((dev_t, RF_Raid_t *, int)); void raidattach __P((int)); int raidsize __P((dev_t)); int raidopen __P((dev_t, int, int, struct proc *)); int raidclose __P((dev_t, int, int, struct proc *)); int raidioctl __P((dev_t, u_long, caddr_t, int, struct proc *)); int raidwrite __P((dev_t, struct uio *, int)); int raidread __P((dev_t, struct uio *, int)); void raidstrategy __P((struct buf *)); int raiddump __P((dev_t, daddr_t, caddr_t, size_t)); /* * Pilfered from ccd.c */ struct raidbuf { struct buf rf_buf; /* new I/O buf. MUST BE FIRST!!! */ struct buf *rf_obp; /* ptr. to original I/O buf */ int rf_flags; /* misc. flags */ RF_DiskQueueData_t *req;/* the request that this was part of.. */ }; #define RAIDGETBUF(rs) pool_get(&(rs)->sc_cbufpool, PR_NOWAIT) #define RAIDPUTBUF(rs, cbp) pool_put(&(rs)->sc_cbufpool, cbp) /* XXX Not sure if the following should be replacing the raidPtrs above, or if it should be used in conjunction with that... */ struct raid_softc { int sc_flags; /* flags */ int sc_cflags; /* configuration flags */ size_t sc_size; /* size of the raid device */ dev_t sc_dev; /* our device.. */ char sc_xname[20]; /* XXX external name */ struct disk sc_dkdev; /* generic disk device info */ struct pool sc_cbufpool; /* component buffer pool */ struct buf_queue buf_queue; /* used for the device queue */ }; /* sc_flags */ #define RAIDF_INITED 0x01 /* unit has been initialized */ #define RAIDF_WLABEL 0x02 /* label area is writable */ #define RAIDF_LABELLING 0x04 /* unit is currently being labelled */ #define RAIDF_WANTED 0x40 /* someone is waiting to obtain a lock */ #define RAIDF_LOCKED 0x80 /* unit is locked */ #define raidunit(x) DISKUNIT(x) int numraid = 0; /* * Allow RAIDOUTSTANDING number of simultaneous IO's to this RAID device. * Be aware that large numbers can allow the driver to consume a lot of * kernel memory, especially on writes, and in degraded mode reads. * * For example: with a stripe width of 64 blocks (32k) and 5 disks, * a single 64K write will typically require 64K for the old data, * 64K for the old parity, and 64K for the new parity, for a total * of 192K (if the parity buffer is not re-used immediately). * Even it if is used immedately, that's still 128K, which when multiplied * by say 10 requests, is 1280K, *on top* of the 640K of incoming data. * * Now in degraded mode, for example, a 64K read on the above setup may * require data reconstruction, which will require *all* of the 4 remaining * disks to participate -- 4 * 32K/disk == 128K again. */ #ifndef RAIDOUTSTANDING #define RAIDOUTSTANDING 6 #endif #define RAIDLABELDEV(dev) \ (MAKEDISKDEV(major((dev)), raidunit((dev)), RAW_PART)) /* declared here, and made public, for the benefit of KVM stuff.. */ struct raid_softc *raid_softc; static void raidgetdefaultlabel __P((RF_Raid_t *, struct raid_softc *, struct disklabel *)); static void raidgetdisklabel __P((dev_t)); static void raidmakedisklabel __P((struct raid_softc *)); static int raidlock __P((struct raid_softc *)); static void raidunlock __P((struct raid_softc *)); static void rf_markalldirty __P((RF_Raid_t *)); void rf_mountroot_hook __P((struct device *)); struct device *raidrootdev; struct cfdata cf_raidrootdev; struct cfdriver cfdrv; /* XXX these should be moved up */ #include "rf_configure.h" #include void rf_ReconThread __P((struct rf_recon_req *)); /* XXX what I want is: */ /*void rf_ReconThread __P((RF_Raid_t *raidPtr)); */ void rf_RewriteParityThread __P((RF_Raid_t *raidPtr)); void rf_CopybackThread __P((RF_Raid_t *raidPtr)); void rf_ReconstructInPlaceThread __P((struct rf_recon_req *)); void rf_buildroothack __P((void *)); RF_AutoConfig_t *rf_find_raid_components __P((void)); void print_component_label __P((RF_ComponentLabel_t *)); RF_ConfigSet_t *rf_create_auto_sets __P((RF_AutoConfig_t *)); static int does_it_fit __P((RF_ConfigSet_t *,RF_AutoConfig_t *)); static int reasonable_label __P((RF_ComponentLabel_t *)); void create_configuration __P((RF_AutoConfig_t *,RF_Config_t *,RF_Raid_t *)); int rf_set_autoconfig __P((RF_Raid_t *, int)); int rf_set_rootpartition __P((RF_Raid_t *, int)); void release_all_vps __P((RF_ConfigSet_t *)); void cleanup_config_set __P((RF_ConfigSet_t *)); static int raidautoconfig = 0; /* Debugging, mostly. Set to 0 to not allow autoconfig to take place */ /* XXX ugly hack. */ const char *raid_rooty = "raid0"; extern struct device *booted_device; void raidattach(num) int num; { int raidID; int i, rc; RF_AutoConfig_t *ac_list; /* autoconfig list */ RF_ConfigSet_t *config_sets; #ifdef DEBUG printf("raidattach: Asked for %d units\n", num); #endif if (num <= 0) { #ifdef DIAGNOSTIC panic("raidattach: count <= 0"); #endif return; } /* This is where all the initialization stuff gets done. */ /* Make some space for requested number of units... */ RF_Calloc(raidPtrs, num, sizeof(RF_Raid_t *), (RF_Raid_t **)); if (raidPtrs == NULL) { panic("raidPtrs is NULL!!\n"); } rc = rf_mutex_init(&rf_sparet_wait_mutex); if (rc) { RF_PANIC(); } rf_sparet_wait_queue = rf_sparet_resp_queue = NULL; for (i = 0; i < numraid; i++) raidPtrs[i] = NULL; rc = rf_BootRaidframe(); if (rc == 0) printf("Kernelized RAIDframe activated\n"); else panic("Serious error booting RAID!!\n"); /* put together some datastructures like the CCD device does.. This * lets us lock the device and what-not when it gets opened. */ raid_softc = (struct raid_softc *) malloc(num * sizeof(struct raid_softc), M_RAIDFRAME, M_NOWAIT); if (raid_softc == NULL) { printf("WARNING: no memory for RAIDframe driver\n"); return; } numraid = num; bzero(raid_softc, num * sizeof(struct raid_softc)); raidrootdev = (struct device *)malloc(num * sizeof(struct device), M_RAIDFRAME, M_NOWAIT); if (raidrootdev == NULL) { panic("No memory for RAIDframe driver!!?!?!\n"); } for (raidID = 0; raidID < num; raidID++) { BUFQ_INIT(&raid_softc[raidID].buf_queue); raidrootdev[raidID].dv_class = DV_DISK; raidrootdev[raidID].dv_cfdata = NULL; raidrootdev[raidID].dv_unit = raidID; raidrootdev[raidID].dv_parent = NULL; raidrootdev[raidID].dv_flags = 0; sprintf(raidrootdev[raidID].dv_xname,"raid%d",raidID); RF_Calloc(raidPtrs[raidID], 1, sizeof(RF_Raid_t), (RF_Raid_t *)); if (raidPtrs[raidID] == NULL) { printf("WARNING: raidPtrs[%d] is NULL\n", raidID); numraid = raidID; return; } } if (raidautoconfig) { /* 1. locate all RAID components on the system */ #if DEBUG printf("Searching for raid components...\n"); #endif ac_list = rf_find_raid_components(); /* 2. sort them into their respective sets */ config_sets = rf_create_auto_sets(ac_list); /* 3. evaluate each set and configure the valid ones This gets done in rf_buildroothack() */ /* schedule the creation of the thread to do the "/ on RAID" stuff */ kthread_create(rf_buildroothack,config_sets); /* 4. make sure we get our mud.. I mean root.. hooks in.. */ /* XXXX pick raid0 for now... and this should be only done if we find something that's bootable!!! */ #if 0 mountroothook_establish(rf_mountroot_hook, &raidrootdev[0]); #endif if (boothowto & RB_ASKNAME) { /* We don't auto-config... */ } else { /* They didn't ask, and we found something bootable... */ /* XXX pretend for now.. */ #if 0 booted_device = &raidrootdev[0]; #endif } } } void rf_buildroothack(arg) void *arg; { RF_ConfigSet_t *config_sets = arg; RF_ConfigSet_t *cset; RF_ConfigSet_t *next_cset; RF_Raid_t *raidPtr; RF_Config_t *config; int raidID; int retcode; raidID=0; cset = config_sets; while(cset != NULL ) { next_cset = cset->next; if (cset->ac->clabel->autoconfigure==1) { printf("Starting autoconfigure on raid%d\n",raidID); config = (RF_Config_t *)malloc(sizeof(RF_Config_t), M_RAIDFRAME, M_NOWAIT); if (config==NULL) { printf("Out of mem!?!?\n"); /* XXX do something more intelligent here. */ return; } /* XXX raidID needs to be set correctly.. */ raidPtr = raidPtrs[raidID]; /* XXX all this stuff should be done SOMEWHERE ELSE! */ raidPtr->raidid = raidID; raidPtr->openings = RAIDOUTSTANDING; create_configuration(cset->ac, config, raidPtr); retcode = rf_Configure( raidPtr, config, cset->ac ); if (retcode == 0) { #if DEBUG printf("Calling raidinit()\n"); #endif /* XXX the 0's below are bogus! */ retcode = raidinit(0, raidPtrs[raidID], 0); if (retcode) { printf("init returned: %d\n",retcode); } rf_markalldirty( raidPtrs[raidID] ); } raidID++; /* XXX for now.. */ free(config, M_RAIDFRAME); } else { /* we're not autoconfiguring this set... release the associated resources */ #if DEBUG printf("Releasing vp's\n"); #endif release_all_vps(cset); #if DEBUG printf("Done.\n"); #endif } /* cleanup */ #if DEBUG printf("Cleaning up config set\n"); #endif cleanup_config_set(cset); #if DEBUG printf("Done cleanup\n"); #endif cset = next_cset; } } int raidsize(dev) dev_t dev; { struct raid_softc *rs; struct disklabel *lp; int part, unit, omask, size; unit = raidunit(dev); if (unit >= numraid) return (-1); rs = &raid_softc[unit]; if ((rs->sc_flags & RAIDF_INITED) == 0) return (-1); part = DISKPART(dev); omask = rs->sc_dkdev.dk_openmask & (1 << part); lp = rs->sc_dkdev.dk_label; if (omask == 0 && raidopen(dev, 0, S_IFBLK, curproc)) return (-1); if (lp->d_partitions[part].p_fstype != FS_SWAP) size = -1; else size = lp->d_partitions[part].p_size * (lp->d_secsize / DEV_BSIZE); if (omask == 0 && raidclose(dev, 0, S_IFBLK, curproc)) return (-1); return (size); } int raiddump(dev, blkno, va, size) dev_t dev; daddr_t blkno; caddr_t va; size_t size; { /* Not implemented. */ return ENXIO; } /* ARGSUSED */ int raidopen(dev, flags, fmt, p) dev_t dev; int flags, fmt; struct proc *p; { int unit = raidunit(dev); struct raid_softc *rs; struct disklabel *lp; int part, pmask; int error = 0; if (unit >= numraid) return (ENXIO); rs = &raid_softc[unit]; if ((error = raidlock(rs)) != 0) return (error); lp = rs->sc_dkdev.dk_label; part = DISKPART(dev); pmask = (1 << part); db1_printf(("Opening raid device number: %d partition: %d\n", unit, part)); if ((rs->sc_flags & RAIDF_INITED) && (rs->sc_dkdev.dk_openmask == 0)) raidgetdisklabel(dev); /* make sure that this partition exists */ if (part != RAW_PART) { db1_printf(("Not a raw partition..\n")); if (((rs->sc_flags & RAIDF_INITED) == 0) || ((part >= lp->d_npartitions) || (lp->d_partitions[part].p_fstype == FS_UNUSED))) { error = ENXIO; raidunlock(rs); db1_printf(("Bailing out...\n")); return (error); } } /* Prevent this unit from being unconfigured while open. */ switch (fmt) { case S_IFCHR: rs->sc_dkdev.dk_copenmask |= pmask; break; case S_IFBLK: rs->sc_dkdev.dk_bopenmask |= pmask; break; } if ((rs->sc_dkdev.dk_openmask == 0) && ((rs->sc_flags & RAIDF_INITED) != 0)) { /* First one... mark things as dirty... Note that we *MUST* have done a configure before this. I DO NOT WANT TO BE SCRIBBLING TO RANDOM COMPONENTS UNTIL IT'S BEEN DETERMINED THAT THEY BELONG TOGETHER!!!!! */ /* XXX should check to see if we're only open for reading here... If so, we needn't do this, but then need some other way of keeping track of what's happened.. */ rf_markalldirty( raidPtrs[unit] ); } rs->sc_dkdev.dk_openmask = rs->sc_dkdev.dk_copenmask | rs->sc_dkdev.dk_bopenmask; raidunlock(rs); return (error); } /* ARGSUSED */ int raidclose(dev, flags, fmt, p) dev_t dev; int flags, fmt; struct proc *p; { int unit = raidunit(dev); struct raid_softc *rs; int error = 0; int part; if (unit >= numraid) return (ENXIO); rs = &raid_softc[unit]; if ((error = raidlock(rs)) != 0) return (error); part = DISKPART(dev); /* ...that much closer to allowing unconfiguration... */ switch (fmt) { case S_IFCHR: rs->sc_dkdev.dk_copenmask &= ~(1 << part); break; case S_IFBLK: rs->sc_dkdev.dk_bopenmask &= ~(1 << part); break; } rs->sc_dkdev.dk_openmask = rs->sc_dkdev.dk_copenmask | rs->sc_dkdev.dk_bopenmask; if ((rs->sc_dkdev.dk_openmask == 0) && ((rs->sc_flags & RAIDF_INITED) != 0)) { /* Last one... device is not unconfigured yet. Device shutdown has taken care of setting the clean bits if RAIDF_INITED is not set mark things as clean... */ rf_update_component_labels( raidPtrs[unit] ); } raidunlock(rs); return (0); } void raidstrategy(bp) register struct buf *bp; { register int s; unsigned int raidID = raidunit(bp->b_dev); RF_Raid_t *raidPtr; struct raid_softc *rs = &raid_softc[raidID]; struct disklabel *lp; int wlabel; if ((rs->sc_flags & RAIDF_INITED) ==0) { bp->b_error = ENXIO; bp->b_flags = B_ERROR; bp->b_resid = bp->b_bcount; biodone(bp); return; } if (raidID >= numraid || !raidPtrs[raidID]) { bp->b_error = ENODEV; bp->b_flags |= B_ERROR; bp->b_resid = bp->b_bcount; biodone(bp); return; } raidPtr = raidPtrs[raidID]; if (!raidPtr->valid) { bp->b_error = ENODEV; bp->b_flags |= B_ERROR; bp->b_resid = bp->b_bcount; biodone(bp); return; } if (bp->b_bcount == 0) { db1_printf(("b_bcount is zero..\n")); biodone(bp); return; } lp = rs->sc_dkdev.dk_label; /* * Do bounds checking and adjust transfer. If there's an * error, the bounds check will flag that for us. */ wlabel = rs->sc_flags & (RAIDF_WLABEL | RAIDF_LABELLING); if (DISKPART(bp->b_dev) != RAW_PART) if (bounds_check_with_label(bp, lp, wlabel) <= 0) { db1_printf(("Bounds check failed!!:%d %d\n", (int) bp->b_blkno, (int) wlabel)); biodone(bp); return; } s = splbio(); bp->b_resid = 0; /* stuff it onto our queue */ BUFQ_INSERT_TAIL(&rs->buf_queue, bp); raidstart(raidPtrs[raidID]); splx(s); } /* ARGSUSED */ int raidread(dev, uio, flags) dev_t dev; struct uio *uio; int flags; { int unit = raidunit(dev); struct raid_softc *rs; int part; if (unit >= numraid) return (ENXIO); rs = &raid_softc[unit]; if ((rs->sc_flags & RAIDF_INITED) == 0) return (ENXIO); part = DISKPART(dev); db1_printf(("raidread: unit: %d partition: %d\n", unit, part)); return (physio(raidstrategy, NULL, dev, B_READ, minphys, uio)); } /* ARGSUSED */ int raidwrite(dev, uio, flags) dev_t dev; struct uio *uio; int flags; { int unit = raidunit(dev); struct raid_softc *rs; if (unit >= numraid) return (ENXIO); rs = &raid_softc[unit]; if ((rs->sc_flags & RAIDF_INITED) == 0) return (ENXIO); db1_printf(("raidwrite\n")); return (physio(raidstrategy, NULL, dev, B_WRITE, minphys, uio)); } int raidioctl(dev, cmd, data, flag, p) dev_t dev; u_long cmd; caddr_t data; int flag; struct proc *p; { int unit = raidunit(dev); int error = 0; int part, pmask; struct raid_softc *rs; RF_Config_t *k_cfg, *u_cfg; RF_Raid_t *raidPtr; RF_RaidDisk_t *diskPtr; RF_AccTotals_t *totals; RF_DeviceConfig_t *d_cfg, **ucfgp; u_char *specific_buf; int retcode = 0; int row; int column; struct rf_recon_req *rrcopy, *rr; RF_ComponentLabel_t *clabel; RF_ComponentLabel_t ci_label; RF_ComponentLabel_t **clabel_ptr; RF_SingleComponent_t *sparePtr,*componentPtr; RF_SingleComponent_t hot_spare; RF_SingleComponent_t component; int i, j, d; if (unit >= numraid) return (ENXIO); rs = &raid_softc[unit]; raidPtr = raidPtrs[unit]; db1_printf(("raidioctl: %d %d %d %d\n", (int) dev, (int) DISKPART(dev), (int) unit, (int) cmd)); /* Must be open for writes for these commands... */ switch (cmd) { case DIOCSDINFO: case DIOCWDINFO: case DIOCWLABEL: if ((flag & FWRITE) == 0) return (EBADF); } /* Must be initialized for these... */ switch (cmd) { case DIOCGDINFO: case DIOCSDINFO: case DIOCWDINFO: case DIOCGPART: case DIOCWLABEL: case DIOCGDEFLABEL: case RAIDFRAME_SHUTDOWN: case RAIDFRAME_REWRITEPARITY: case RAIDFRAME_GET_INFO: case RAIDFRAME_RESET_ACCTOTALS: case RAIDFRAME_GET_ACCTOTALS: case RAIDFRAME_KEEP_ACCTOTALS: case RAIDFRAME_GET_SIZE: case RAIDFRAME_FAIL_DISK: case RAIDFRAME_COPYBACK: case RAIDFRAME_CHECK_RECON_STATUS: case RAIDFRAME_GET_COMPONENT_LABEL: case RAIDFRAME_SET_COMPONENT_LABEL: case RAIDFRAME_ADD_HOT_SPARE: case RAIDFRAME_REMOVE_HOT_SPARE: case RAIDFRAME_INIT_LABELS: case RAIDFRAME_REBUILD_IN_PLACE: case RAIDFRAME_CHECK_PARITY: case RAIDFRAME_CHECK_PARITYREWRITE_STATUS: case RAIDFRAME_CHECK_COPYBACK_STATUS: case RAIDFRAME_SET_AUTOCONFIG: case RAIDFRAME_SET_ROOT: if ((rs->sc_flags & RAIDF_INITED) == 0) return (ENXIO); } switch (cmd) { /* configure the system */ case RAIDFRAME_CONFIGURE: if (raidPtr->valid) { /* There is a valid RAID set running on this unit! */ printf("raid%d: Device already configured!\n",unit); } /* copy-in the configuration information */ /* data points to a pointer to the configuration structure */ u_cfg = *((RF_Config_t **) data); RF_Malloc(k_cfg, sizeof(RF_Config_t), (RF_Config_t *)); if (k_cfg == NULL) { return (ENOMEM); } retcode = copyin((caddr_t) u_cfg, (caddr_t) k_cfg, sizeof(RF_Config_t)); if (retcode) { RF_Free(k_cfg, sizeof(RF_Config_t)); db1_printf(("rf_ioctl: retcode=%d copyin.1\n", retcode)); return (retcode); } /* allocate a buffer for the layout-specific data, and copy it * in */ if (k_cfg->layoutSpecificSize) { if (k_cfg->layoutSpecificSize > 10000) { /* sanity check */ RF_Free(k_cfg, sizeof(RF_Config_t)); return (EINVAL); } RF_Malloc(specific_buf, k_cfg->layoutSpecificSize, (u_char *)); if (specific_buf == NULL) { RF_Free(k_cfg, sizeof(RF_Config_t)); return (ENOMEM); } retcode = copyin(k_cfg->layoutSpecific, (caddr_t) specific_buf, k_cfg->layoutSpecificSize); if (retcode) { RF_Free(k_cfg, sizeof(RF_Config_t)); RF_Free(specific_buf, k_cfg->layoutSpecificSize); db1_printf(("rf_ioctl: retcode=%d copyin.2\n", retcode)); return (retcode); } } else specific_buf = NULL; k_cfg->layoutSpecific = specific_buf; /* should do some kind of sanity check on the configuration. * Store the sum of all the bytes in the last byte? */ /* configure the system */ /* * Clear the entire RAID descriptor, just to make sure * there is no stale data left in the case of a * reconfiguration */ bzero((char *) raidPtr, sizeof(RF_Raid_t)); raidPtr->raidid = unit; retcode = rf_Configure(raidPtr, k_cfg, NULL); if (retcode == 0) { /* allow this many simultaneous IO's to this RAID device */ raidPtr->openings = RAIDOUTSTANDING; retcode = raidinit(dev, raidPtr, unit); rf_markalldirty( raidPtr ); } /* free the buffers. No return code here. */ if (k_cfg->layoutSpecificSize) { RF_Free(specific_buf, k_cfg->layoutSpecificSize); } RF_Free(k_cfg, sizeof(RF_Config_t)); return (retcode); /* shutdown the system */ case RAIDFRAME_SHUTDOWN: if ((error = raidlock(rs)) != 0) return (error); /* * If somebody has a partition mounted, we shouldn't * shutdown. */ part = DISKPART(dev); pmask = (1 << part); if ((rs->sc_dkdev.dk_openmask & ~pmask) || ((rs->sc_dkdev.dk_bopenmask & pmask) && (rs->sc_dkdev.dk_copenmask & pmask))) { raidunlock(rs); return (EBUSY); } retcode = rf_Shutdown(raidPtr); pool_destroy(&rs->sc_cbufpool); /* It's no longer initialized... */ rs->sc_flags &= ~RAIDF_INITED; /* Detach the disk. */ disk_detach(&rs->sc_dkdev); raidunlock(rs); return (retcode); case RAIDFRAME_GET_COMPONENT_LABEL: clabel_ptr = (RF_ComponentLabel_t **) data; /* need to read the component label for the disk indicated by row,column in clabel */ /* For practice, let's get it directly fromdisk, rather than from the in-core copy */ RF_Malloc( clabel, sizeof( RF_ComponentLabel_t ), (RF_ComponentLabel_t *)); if (clabel == NULL) return (ENOMEM); bzero((char *) clabel, sizeof(RF_ComponentLabel_t)); retcode = copyin( *clabel_ptr, clabel, sizeof(RF_ComponentLabel_t)); if (retcode) { RF_Free( clabel, sizeof(RF_ComponentLabel_t)); return(retcode); } row = clabel->row; column = clabel->column; if ((row < 0) || (row >= raidPtr->numRow) || (column < 0) || (column >= raidPtr->numCol)) { RF_Free( clabel, sizeof(RF_ComponentLabel_t)); return(EINVAL); } raidread_component_label(raidPtr->Disks[row][column].dev, raidPtr->raid_cinfo[row][column].ci_vp, clabel ); retcode = copyout((caddr_t) clabel, (caddr_t) *clabel_ptr, sizeof(RF_ComponentLabel_t)); RF_Free( clabel, sizeof(RF_ComponentLabel_t)); return (retcode); case RAIDFRAME_SET_COMPONENT_LABEL: clabel = (RF_ComponentLabel_t *) data; /* XXX check the label for valid stuff... */ /* Note that some things *should not* get modified -- the user should be re-initing the labels instead of trying to patch things. */ printf("Got component label:\n"); printf("Version: %d\n",clabel->version); printf("Serial Number: %d\n",clabel->serial_number); printf("Mod counter: %d\n",clabel->mod_counter); printf("Row: %d\n", clabel->row); printf("Column: %d\n", clabel->column); printf("Num Rows: %d\n", clabel->num_rows); printf("Num Columns: %d\n", clabel->num_columns); printf("Clean: %d\n", clabel->clean); printf("Status: %d\n", clabel->status); row = clabel->row; column = clabel->column; if ((row < 0) || (row >= raidPtr->numRow) || (column < 0) || (column >= raidPtr->numCol)) { return(EINVAL); } /* XXX this isn't allowed to do anything for now :-) */ /* XXX and before it is, we need to fill in the rest of the fields!?!?!?! */ #if 0 raidwrite_component_label( raidPtr->Disks[row][column].dev, raidPtr->raid_cinfo[row][column].ci_vp, clabel ); #endif return (0); case RAIDFRAME_INIT_LABELS: clabel = (RF_ComponentLabel_t *) data; /* we only want the serial number from the above. We get all the rest of the information from the config that was used to create this RAID set. */ raidPtr->serial_number = clabel->serial_number; raid_init_component_label(raidPtr, clabel); for(row=0;rownumRow;row++) { ci_label.row = row; for(column=0;columnnumCol;column++) { diskPtr = &raidPtr->Disks[row][column]; ci_label.blockSize = diskPtr->blockSize; ci_label.numBlocks = diskPtr->numBlocks; ci_label.partitionSize = diskPtr->partitionSize; ci_label.column = column; raidwrite_component_label( raidPtr->Disks[row][column].dev, raidPtr->raid_cinfo[row][column].ci_vp, &ci_label ); } } return (retcode); case RAIDFRAME_SET_AUTOCONFIG: d = rf_set_autoconfig(raidPtr, *data); printf("New autoconfig value is: %d\n", d); *data = d; return (retcode); case RAIDFRAME_SET_ROOT: d = rf_set_rootpartition(raidPtr, *data); printf("New rootpartition value is: %d\n", d); *data = d; return (retcode); /* initialize all parity */ case RAIDFRAME_REWRITEPARITY: if (raidPtr->Layout.map->faultsTolerated == 0) { /* Parity for RAID 0 is trivially correct */ raidPtr->parity_good = RF_RAID_CLEAN; return(0); } if (raidPtr->parity_rewrite_in_progress == 1) { /* Re-write is already in progress! */ return(EINVAL); } retcode = RF_CREATE_THREAD(raidPtr->parity_rewrite_thread, rf_RewriteParityThread, raidPtr,"raid_parity"); return (retcode); case RAIDFRAME_ADD_HOT_SPARE: sparePtr = (RF_SingleComponent_t *) data; memcpy( &hot_spare, sparePtr, sizeof(RF_SingleComponent_t)); printf("Adding spare\n"); retcode = rf_add_hot_spare(raidPtr, &hot_spare); return(retcode); case RAIDFRAME_REMOVE_HOT_SPARE: return(retcode); case RAIDFRAME_REBUILD_IN_PLACE: if (raidPtr->Layout.map->faultsTolerated == 0) { /* Can't do this on a RAID 0!! */ return(EINVAL); } if (raidPtr->recon_in_progress == 1) { /* a reconstruct is already in progress! */ return(EINVAL); } componentPtr = (RF_SingleComponent_t *) data; memcpy( &component, componentPtr, sizeof(RF_SingleComponent_t)); row = component.row; column = component.column; printf("Rebuild: %d %d\n",row, column); if ((row < 0) || (row >= raidPtr->numRow) || (column < 0) || (column >= raidPtr->numCol)) { return(EINVAL); } RF_Malloc(rrcopy, sizeof(*rrcopy), (struct rf_recon_req *)); if (rrcopy == NULL) return(ENOMEM); rrcopy->raidPtr = (void *) raidPtr; rrcopy->row = row; rrcopy->col = column; retcode = RF_CREATE_THREAD(raidPtr->recon_thread, rf_ReconstructInPlaceThread, rrcopy,"raid_reconip"); return(retcode); case RAIDFRAME_GET_INFO: if (!raidPtr->valid) return (ENODEV); ucfgp = (RF_DeviceConfig_t **) data; RF_Malloc(d_cfg, sizeof(RF_DeviceConfig_t), (RF_DeviceConfig_t *)); if (d_cfg == NULL) return (ENOMEM); bzero((char *) d_cfg, sizeof(RF_DeviceConfig_t)); d_cfg->rows = raidPtr->numRow; d_cfg->cols = raidPtr->numCol; d_cfg->ndevs = raidPtr->numRow * raidPtr->numCol; if (d_cfg->ndevs >= RF_MAX_DISKS) { RF_Free(d_cfg, sizeof(RF_DeviceConfig_t)); return (ENOMEM); } d_cfg->nspares = raidPtr->numSpare; if (d_cfg->nspares >= RF_MAX_DISKS) { RF_Free(d_cfg, sizeof(RF_DeviceConfig_t)); return (ENOMEM); } d_cfg->maxqdepth = raidPtr->maxQueueDepth; d = 0; for (i = 0; i < d_cfg->rows; i++) { for (j = 0; j < d_cfg->cols; j++) { d_cfg->devs[d] = raidPtr->Disks[i][j]; d++; } } for (j = d_cfg->cols, i = 0; i < d_cfg->nspares; i++, j++) { d_cfg->spares[i] = raidPtr->Disks[0][j]; } retcode = copyout((caddr_t) d_cfg, (caddr_t) * ucfgp, sizeof(RF_DeviceConfig_t)); RF_Free(d_cfg, sizeof(RF_DeviceConfig_t)); return (retcode); case RAIDFRAME_CHECK_PARITY: *(int *) data = raidPtr->parity_good; return (0); case RAIDFRAME_RESET_ACCTOTALS: bzero(&raidPtr->acc_totals, sizeof(raidPtr->acc_totals)); return (0); case RAIDFRAME_GET_ACCTOTALS: totals = (RF_AccTotals_t *) data; *totals = raidPtr->acc_totals; return (0); case RAIDFRAME_KEEP_ACCTOTALS: raidPtr->keep_acc_totals = *(int *)data; return (0); case RAIDFRAME_GET_SIZE: *(int *) data = raidPtr->totalSectors; return (0); /* fail a disk & optionally start reconstruction */ case RAIDFRAME_FAIL_DISK: if (raidPtr->Layout.map->faultsTolerated == 0) { /* Can't do this on a RAID 0!! */ return(EINVAL); } rr = (struct rf_recon_req *) data; if (rr->row < 0 || rr->row >= raidPtr->numRow || rr->col < 0 || rr->col >= raidPtr->numCol) return (EINVAL); printf("raid%d: Failing the disk: row: %d col: %d\n", unit, rr->row, rr->col); /* make a copy of the recon request so that we don't rely on * the user's buffer */ RF_Malloc(rrcopy, sizeof(*rrcopy), (struct rf_recon_req *)); if (rrcopy == NULL) return(ENOMEM); bcopy(rr, rrcopy, sizeof(*rr)); rrcopy->raidPtr = (void *) raidPtr; retcode = RF_CREATE_THREAD(raidPtr->recon_thread, rf_ReconThread, rrcopy,"raid_recon"); return (0); /* invoke a copyback operation after recon on whatever disk * needs it, if any */ case RAIDFRAME_COPYBACK: if (raidPtr->Layout.map->faultsTolerated == 0) { /* This makes no sense on a RAID 0!! */ return(EINVAL); } if (raidPtr->copyback_in_progress == 1) { /* Copyback is already in progress! */ return(EINVAL); } retcode = RF_CREATE_THREAD(raidPtr->copyback_thread, rf_CopybackThread, raidPtr,"raid_copyback"); return (retcode); /* return the percentage completion of reconstruction */ case RAIDFRAME_CHECK_RECON_STATUS: if (raidPtr->Layout.map->faultsTolerated == 0) { /* This makes no sense on a RAID 0 */ return(EINVAL); } row = 0; /* XXX we only consider a single row... */ if (raidPtr->status[row] != rf_rs_reconstructing) *(int *) data = 100; else *(int *) data = raidPtr->reconControl[row]->percentComplete; return (0); case RAIDFRAME_CHECK_PARITYREWRITE_STATUS: if (raidPtr->Layout.map->faultsTolerated == 0) { /* This makes no sense on a RAID 0 */ return(EINVAL); } if (raidPtr->parity_rewrite_in_progress == 1) { *(int *) data = 100 * raidPtr->parity_rewrite_stripes_done / raidPtr->Layout.numStripe; } else { *(int *) data = 100; } return (0); case RAIDFRAME_CHECK_COPYBACK_STATUS: if (raidPtr->Layout.map->faultsTolerated == 0) { /* This makes no sense on a RAID 0 */ return(EINVAL); } if (raidPtr->copyback_in_progress == 1) { *(int *) data = 100 * raidPtr->copyback_stripes_done / raidPtr->Layout.numStripe; } else { *(int *) data = 100; } return (0); /* the sparetable daemon calls this to wait for the kernel to * need a spare table. this ioctl does not return until a * spare table is needed. XXX -- calling mpsleep here in the * ioctl code is almost certainly wrong and evil. -- XXX XXX * -- I should either compute the spare table in the kernel, * or have a different -- XXX XXX -- interface (a different * character device) for delivering the table -- XXX */ #if 0 case RAIDFRAME_SPARET_WAIT: RF_LOCK_MUTEX(rf_sparet_wait_mutex); while (!rf_sparet_wait_queue) mpsleep(&rf_sparet_wait_queue, (PZERO + 1) | PCATCH, "sparet wait", 0, (void *) simple_lock_addr(rf_sparet_wait_mutex), MS_LOCK_SIMPLE); waitreq = rf_sparet_wait_queue; rf_sparet_wait_queue = rf_sparet_wait_queue->next; RF_UNLOCK_MUTEX(rf_sparet_wait_mutex); /* structure assignment */ *((RF_SparetWait_t *) data) = *waitreq; RF_Free(waitreq, sizeof(*waitreq)); return (0); /* wakes up a process waiting on SPARET_WAIT and puts an error * code in it that will cause the dameon to exit */ case RAIDFRAME_ABORT_SPARET_WAIT: RF_Malloc(waitreq, sizeof(*waitreq), (RF_SparetWait_t *)); waitreq->fcol = -1; RF_LOCK_MUTEX(rf_sparet_wait_mutex); waitreq->next = rf_sparet_wait_queue; rf_sparet_wait_queue = waitreq; RF_UNLOCK_MUTEX(rf_sparet_wait_mutex); wakeup(&rf_sparet_wait_queue); return (0); /* used by the spare table daemon to deliver a spare table * into the kernel */ case RAIDFRAME_SEND_SPARET: /* install the spare table */ retcode = rf_SetSpareTable(raidPtr, *(void **) data); /* respond to the requestor. the return status of the spare * table installation is passed in the "fcol" field */ RF_Malloc(waitreq, sizeof(*waitreq), (RF_SparetWait_t *)); waitreq->fcol = retcode; RF_LOCK_MUTEX(rf_sparet_wait_mutex); waitreq->next = rf_sparet_resp_queue; rf_sparet_resp_queue = waitreq; wakeup(&rf_sparet_resp_queue); RF_UNLOCK_MUTEX(rf_sparet_wait_mutex); return (retcode); #endif default: break; /* fall through to the os-specific code below */ } if (!raidPtr->valid) return (EINVAL); /* * Add support for "regular" device ioctls here. */ switch (cmd) { case DIOCGDINFO: *(struct disklabel *) data = *(rs->sc_dkdev.dk_label); break; case DIOCGPART: ((struct partinfo *) data)->disklab = rs->sc_dkdev.dk_label; ((struct partinfo *) data)->part = &rs->sc_dkdev.dk_label->d_partitions[DISKPART(dev)]; break; case DIOCWDINFO: case DIOCSDINFO: if ((error = raidlock(rs)) != 0) return (error); rs->sc_flags |= RAIDF_LABELLING; error = setdisklabel(rs->sc_dkdev.dk_label, (struct disklabel *) data, 0, rs->sc_dkdev.dk_cpulabel); if (error == 0) { if (cmd == DIOCWDINFO) error = writedisklabel(RAIDLABELDEV(dev), raidstrategy, rs->sc_dkdev.dk_label, rs->sc_dkdev.dk_cpulabel); } rs->sc_flags &= ~RAIDF_LABELLING; raidunlock(rs); if (error) return (error); break; case DIOCWLABEL: if (*(int *) data != 0) rs->sc_flags |= RAIDF_WLABEL; else rs->sc_flags &= ~RAIDF_WLABEL; break; case DIOCGDEFLABEL: raidgetdefaultlabel(raidPtr, rs, (struct disklabel *) data); break; default: retcode = ENOTTY; } return (retcode); } /* raidinit -- complete the rest of the initialization for the RAIDframe device. */ static int raidinit(dev, raidPtr, unit) dev_t dev; RF_Raid_t *raidPtr; int unit; { int retcode; struct raid_softc *rs; retcode = 0; rs = &raid_softc[unit]; pool_init(&rs->sc_cbufpool, sizeof(struct raidbuf), 0, 0, 0, "raidpl", 0, NULL, NULL, M_RAIDFRAME); /* XXX should check return code first... */ rs->sc_flags |= RAIDF_INITED; sprintf(rs->sc_xname, "raid%d", unit); /* XXX doesn't check bounds. */ rs->sc_dkdev.dk_name = rs->sc_xname; /* disk_attach actually creates space for the CPU disklabel, among * other things, so it's critical to call this *BEFORE* we try putzing * with disklabels. */ disk_attach(&rs->sc_dkdev); /* XXX There may be a weird interaction here between this, and * protectedSectors, as used in RAIDframe. */ rs->sc_size = raidPtr->totalSectors; rs->sc_dev = dev; return (retcode); } /* wake up the daemon & tell it to get us a spare table * XXX * the entries in the queues should be tagged with the raidPtr * so that in the extremely rare case that two recons happen at once, * we know for which device were requesting a spare table * XXX * * XXX This code is not currently used. GO */ int rf_GetSpareTableFromDaemon(req) RF_SparetWait_t *req; { int retcode; RF_LOCK_MUTEX(rf_sparet_wait_mutex); req->next = rf_sparet_wait_queue; rf_sparet_wait_queue = req; wakeup(&rf_sparet_wait_queue); /* mpsleep unlocks the mutex */ while (!rf_sparet_resp_queue) { tsleep(&rf_sparet_resp_queue, PRIBIO, "raidframe getsparetable", 0); } req = rf_sparet_resp_queue; rf_sparet_resp_queue = req->next; RF_UNLOCK_MUTEX(rf_sparet_wait_mutex); retcode = req->fcol; RF_Free(req, sizeof(*req)); /* this is not the same req as we * alloc'd */ return (retcode); } /* a wrapper around rf_DoAccess that extracts appropriate info from the * bp & passes it down. * any calls originating in the kernel must use non-blocking I/O * do some extra sanity checking to return "appropriate" error values for * certain conditions (to make some standard utilities work) * * Formerly known as: rf_DoAccessKernel */ void raidstart(raidPtr) RF_Raid_t *raidPtr; { RF_SectorCount_t num_blocks, pb, sum; RF_RaidAddr_t raid_addr; int retcode; struct partition *pp; daddr_t blocknum; int unit; struct raid_softc *rs; int do_async; struct buf *bp; unit = raidPtr->raidid; rs = &raid_softc[unit]; /* Check to see if we're at the limit... */ RF_LOCK_MUTEX(raidPtr->mutex); while (raidPtr->openings > 0) { RF_UNLOCK_MUTEX(raidPtr->mutex); /* get the next item, if any, from the queue */ if ((bp = BUFQ_FIRST(&rs->buf_queue)) == NULL) { /* nothing more to do */ return; } BUFQ_REMOVE(&rs->buf_queue, bp); /* Ok, for the bp we have here, bp->b_blkno is relative to the * partition.. Need to make it absolute to the underlying * device.. */ blocknum = bp->b_blkno; if (DISKPART(bp->b_dev) != RAW_PART) { pp = &rs->sc_dkdev.dk_label->d_partitions[DISKPART(bp->b_dev)]; blocknum += pp->p_offset; } db1_printf(("Blocks: %d, %d\n", (int) bp->b_blkno, (int) blocknum)); db1_printf(("bp->b_bcount = %d\n", (int) bp->b_bcount)); db1_printf(("bp->b_resid = %d\n", (int) bp->b_resid)); /* *THIS* is where we adjust what block we're going to... * but DO NOT TOUCH bp->b_blkno!!! */ raid_addr = blocknum; num_blocks = bp->b_bcount >> raidPtr->logBytesPerSector; pb = (bp->b_bcount & raidPtr->sectorMask) ? 1 : 0; sum = raid_addr + num_blocks + pb; if (1 || rf_debugKernelAccess) { db1_printf(("raid_addr=%d sum=%d num_blocks=%d(+%d) (%d)\n", (int) raid_addr, (int) sum, (int) num_blocks, (int) pb, (int) bp->b_resid)); } if ((sum > raidPtr->totalSectors) || (sum < raid_addr) || (sum < num_blocks) || (sum < pb)) { bp->b_error = ENOSPC; bp->b_flags |= B_ERROR; bp->b_resid = bp->b_bcount; biodone(bp); RF_LOCK_MUTEX(raidPtr->mutex); continue; } /* * XXX rf_DoAccess() should do this, not just DoAccessKernel() */ if (bp->b_bcount & raidPtr->sectorMask) { bp->b_error = EINVAL; bp->b_flags |= B_ERROR; bp->b_resid = bp->b_bcount; biodone(bp); RF_LOCK_MUTEX(raidPtr->mutex); continue; } db1_printf(("Calling DoAccess..\n")); RF_LOCK_MUTEX(raidPtr->mutex); raidPtr->openings--; RF_UNLOCK_MUTEX(raidPtr->mutex); /* * Everything is async. */ do_async = 1; /* don't ever condition on bp->b_flags & B_WRITE. * always condition on B_READ instead */ /* XXX we're still at splbio() here... do we *really* need to be? */ retcode = rf_DoAccess(raidPtr, (bp->b_flags & B_READ) ? RF_IO_TYPE_READ : RF_IO_TYPE_WRITE, do_async, raid_addr, num_blocks, bp->b_un.b_addr, bp, NULL, NULL, RF_DAG_NONBLOCKING_IO, NULL, NULL, NULL); RF_LOCK_MUTEX(raidPtr->mutex); } RF_UNLOCK_MUTEX(raidPtr->mutex); } /* invoke an I/O from kernel mode. Disk queue should be locked upon entry */ int rf_DispatchKernelIO(queue, req) RF_DiskQueue_t *queue; RF_DiskQueueData_t *req; { int op = (req->type == RF_IO_TYPE_READ) ? B_READ : B_WRITE; struct buf *bp; struct raidbuf *raidbp = NULL; struct raid_softc *rs; int unit; int s; s=0; /* s = splbio();*/ /* want to test this */ /* XXX along with the vnode, we also need the softc associated with * this device.. */ req->queue = queue; unit = queue->raidPtr->raidid; db1_printf(("DispatchKernelIO unit: %d\n", unit)); if (unit >= numraid) { printf("Invalid unit number: %d %d\n", unit, numraid); panic("Invalid Unit number in rf_DispatchKernelIO\n"); } rs = &raid_softc[unit]; /* XXX is this the right place? */ disk_busy(&rs->sc_dkdev); bp = req->bp; #if 1 /* XXX when there is a physical disk failure, someone is passing us a * buffer that contains old stuff!! Attempt to deal with this problem * without taking a performance hit... (not sure where the real bug * is. It's buried in RAIDframe somewhere) :-( GO ) */ if (bp->b_flags & B_ERROR) { bp->b_flags &= ~B_ERROR; } if (bp->b_error != 0) { bp->b_error = 0; } #endif raidbp = RAIDGETBUF(rs); raidbp->rf_flags = 0; /* XXX not really used anywhere... */ /* * context for raidiodone */ raidbp->rf_obp = bp; raidbp->req = req; LIST_INIT(&raidbp->rf_buf.b_dep); switch (req->type) { case RF_IO_TYPE_NOP: /* used primarily to unlock a locked queue */ /* XXX need to do something extra here.. */ /* I'm leaving this in, as I've never actually seen it used, * and I'd like folks to report it... GO */ printf(("WAKEUP CALLED\n")); queue->numOutstanding++; /* XXX need to glue the original buffer into this?? */ KernelWakeupFunc(&raidbp->rf_buf); break; case RF_IO_TYPE_READ: case RF_IO_TYPE_WRITE: if (req->tracerec) { RF_ETIMER_START(req->tracerec->timer); } InitBP(&raidbp->rf_buf, queue->rf_cinfo->ci_vp, op | bp->b_flags, queue->rf_cinfo->ci_dev, req->sectorOffset, req->numSector, req->buf, KernelWakeupFunc, (void *) req, queue->raidPtr->logBytesPerSector, req->b_proc); if (rf_debugKernelAccess) { db1_printf(("dispatch: bp->b_blkno = %ld\n", (long) bp->b_blkno)); } queue->numOutstanding++; queue->last_deq_sector = req->sectorOffset; /* acc wouldn't have been let in if there were any pending * reqs at any other priority */ queue->curPriority = req->priority; db1_printf(("Going for %c to unit %d row %d col %d\n", req->type, unit, queue->row, queue->col)); db1_printf(("sector %d count %d (%d bytes) %d\n", (int) req->sectorOffset, (int) req->numSector, (int) (req->numSector << queue->raidPtr->logBytesPerSector), (int) queue->raidPtr->logBytesPerSector)); if ((raidbp->rf_buf.b_flags & B_READ) == 0) { raidbp->rf_buf.b_vp->v_numoutput++; } VOP_STRATEGY(&raidbp->rf_buf); break; default: panic("bad req->type in rf_DispatchKernelIO"); } db1_printf(("Exiting from DispatchKernelIO\n")); /* splx(s); */ /* want to test this */ return (0); } /* this is the callback function associated with a I/O invoked from kernel code. */ static void KernelWakeupFunc(vbp) struct buf *vbp; { RF_DiskQueueData_t *req = NULL; RF_DiskQueue_t *queue; struct raidbuf *raidbp = (struct raidbuf *) vbp; struct buf *bp; struct raid_softc *rs; int unit; register int s; s = splbio(); db1_printf(("recovering the request queue:\n")); req = raidbp->req; bp = raidbp->rf_obp; queue = (RF_DiskQueue_t *) req->queue; if (raidbp->rf_buf.b_flags & B_ERROR) { bp->b_flags |= B_ERROR; bp->b_error = raidbp->rf_buf.b_error ? raidbp->rf_buf.b_error : EIO; } /* XXX methinks this could be wrong... */ #if 1 bp->b_resid = raidbp->rf_buf.b_resid; #endif if (req->tracerec) { RF_ETIMER_STOP(req->tracerec->timer); RF_ETIMER_EVAL(req->tracerec->timer); RF_LOCK_MUTEX(rf_tracing_mutex); req->tracerec->diskwait_us += RF_ETIMER_VAL_US(req->tracerec->timer); req->tracerec->phys_io_us += RF_ETIMER_VAL_US(req->tracerec->timer); req->tracerec->num_phys_ios++; RF_UNLOCK_MUTEX(rf_tracing_mutex); } bp->b_bcount = raidbp->rf_buf.b_bcount; /* XXXX ?? */ unit = queue->raidPtr->raidid; /* *Much* simpler :-> */ /* XXX Ok, let's get aggressive... If B_ERROR is set, let's go * ballistic, and mark the component as hosed... */ if (bp->b_flags & B_ERROR) { /* Mark the disk as dead */ /* but only mark it once... */ if (queue->raidPtr->Disks[queue->row][queue->col].status == rf_ds_optimal) { printf("raid%d: IO Error. Marking %s as failed.\n", unit, queue->raidPtr->Disks[queue->row][queue->col].devname); queue->raidPtr->Disks[queue->row][queue->col].status = rf_ds_failed; queue->raidPtr->status[queue->row] = rf_rs_degraded; queue->raidPtr->numFailures++; /* XXX here we should bump the version number for each component, and write that data out */ } else { /* Disk is already dead... */ /* printf("Disk already marked as dead!\n"); */ } } rs = &raid_softc[unit]; RAIDPUTBUF(rs, raidbp); if (bp->b_resid == 0) { /* XXX is this the right place for a disk_unbusy()??!??!?!? */ disk_unbusy(&rs->sc_dkdev, (bp->b_bcount - bp->b_resid)); } rf_DiskIOComplete(queue, req, (bp->b_flags & B_ERROR) ? 1 : 0); (req->CompleteFunc) (req->argument, (bp->b_flags & B_ERROR) ? 1 : 0); splx(s); } /* * initialize a buf structure for doing an I/O in the kernel. */ static void InitBP( struct buf * bp, struct vnode * b_vp, unsigned rw_flag, dev_t dev, RF_SectorNum_t startSect, RF_SectorCount_t numSect, caddr_t buf, void (*cbFunc) (struct buf *), void *cbArg, int logBytesPerSector, struct proc * b_proc) { /* bp->b_flags = B_PHYS | rw_flag; */ bp->b_flags = B_CALL | rw_flag; /* XXX need B_PHYS here too??? */ bp->b_bcount = numSect << logBytesPerSector; bp->b_bufsize = bp->b_bcount; bp->b_error = 0; bp->b_dev = dev; bp->b_un.b_addr = buf; bp->b_blkno = startSect; bp->b_resid = bp->b_bcount; /* XXX is this right!??!?!! */ if (bp->b_bcount == 0) { panic("bp->b_bcount is zero in InitBP!!\n"); } bp->b_proc = b_proc; bp->b_iodone = cbFunc; bp->b_vp = b_vp; } static void raidgetdefaultlabel(raidPtr, rs, lp) RF_Raid_t *raidPtr; struct raid_softc *rs; struct disklabel *lp; { db1_printf(("Building a default label...\n")); bzero(lp, sizeof(*lp)); /* fabricate a label... */ lp->d_secperunit = raidPtr->totalSectors; lp->d_secsize = raidPtr->bytesPerSector; lp->d_nsectors = raidPtr->Layout.dataSectorsPerStripe; lp->d_ntracks = 1; lp->d_ncylinders = raidPtr->totalSectors / (lp->d_nsectors * lp->d_ntracks); lp->d_secpercyl = lp->d_ntracks * lp->d_nsectors; strncpy(lp->d_typename, "raid", sizeof(lp->d_typename)); lp->d_type = DTYPE_RAID; strncpy(lp->d_packname, "fictitious", sizeof(lp->d_packname)); lp->d_rpm = 3600; lp->d_interleave = 1; lp->d_flags = 0; lp->d_partitions[RAW_PART].p_offset = 0; lp->d_partitions[RAW_PART].p_size = raidPtr->totalSectors; lp->d_partitions[RAW_PART].p_fstype = FS_UNUSED; lp->d_npartitions = RAW_PART + 1; lp->d_magic = DISKMAGIC; lp->d_magic2 = DISKMAGIC; lp->d_checksum = dkcksum(rs->sc_dkdev.dk_label); } /* * Read the disklabel from the raid device. If one is not present, fake one * up. */ static void raidgetdisklabel(dev) dev_t dev; { int unit = raidunit(dev); struct raid_softc *rs = &raid_softc[unit]; char *errstring; struct disklabel *lp = rs->sc_dkdev.dk_label; struct cpu_disklabel *clp = rs->sc_dkdev.dk_cpulabel; RF_Raid_t *raidPtr; db1_printf(("Getting the disklabel...\n")); bzero(clp, sizeof(*clp)); raidPtr = raidPtrs[unit]; raidgetdefaultlabel(raidPtr, rs, lp); /* * Call the generic disklabel extraction routine. */ errstring = readdisklabel(RAIDLABELDEV(dev), raidstrategy, rs->sc_dkdev.dk_label, rs->sc_dkdev.dk_cpulabel); if (errstring) raidmakedisklabel(rs); else { int i; struct partition *pp; /* * Sanity check whether the found disklabel is valid. * * This is necessary since total size of the raid device * may vary when an interleave is changed even though exactly * same componets are used, and old disklabel may used * if that is found. */ if (lp->d_secperunit != rs->sc_size) printf("WARNING: %s: " "total sector size in disklabel (%d) != " "the size of raid (%ld)\n", rs->sc_xname, lp->d_secperunit, (long) rs->sc_size); for (i = 0; i < lp->d_npartitions; i++) { pp = &lp->d_partitions[i]; if (pp->p_offset + pp->p_size > rs->sc_size) printf("WARNING: %s: end of partition `%c' " "exceeds the size of raid (%ld)\n", rs->sc_xname, 'a' + i, (long) rs->sc_size); } } } /* * Take care of things one might want to take care of in the event * that a disklabel isn't present. */ static void raidmakedisklabel(rs) struct raid_softc *rs; { struct disklabel *lp = rs->sc_dkdev.dk_label; db1_printf(("Making a label..\n")); /* * For historical reasons, if there's no disklabel present * the raw partition must be marked FS_BSDFFS. */ lp->d_partitions[RAW_PART].p_fstype = FS_BSDFFS; strncpy(lp->d_packname, "default label", sizeof(lp->d_packname)); lp->d_checksum = dkcksum(lp); } /* * Lookup the provided name in the filesystem. If the file exists, * is a valid block device, and isn't being used by anyone else, * set *vpp to the file's vnode. * You'll find the original of this in ccd.c */ int raidlookup(path, p, vpp) char *path; struct proc *p; struct vnode **vpp; /* result */ { struct nameidata nd; struct vnode *vp; struct vattr va; int error; NDINIT(&nd, LOOKUP, FOLLOW, UIO_SYSSPACE, path, p); if ((error = vn_open(&nd, FREAD | FWRITE, 0)) != 0) { #ifdef DEBUG printf("RAIDframe: vn_open returned %d\n", error); #endif return (error); } vp = nd.ni_vp; if (vp->v_usecount > 1) { VOP_UNLOCK(vp, 0); (void) vn_close(vp, FREAD | FWRITE, p->p_ucred, p); return (EBUSY); } if ((error = VOP_GETATTR(vp, &va, p->p_ucred, p)) != 0) { VOP_UNLOCK(vp, 0); (void) vn_close(vp, FREAD | FWRITE, p->p_ucred, p); return (error); } /* XXX: eventually we should handle VREG, too. */ if (va.va_type != VBLK) { VOP_UNLOCK(vp, 0); (void) vn_close(vp, FREAD | FWRITE, p->p_ucred, p); return (ENOTBLK); } VOP_UNLOCK(vp, 0); *vpp = vp; return (0); } /* * Wait interruptibly for an exclusive lock. * * XXX * Several drivers do this; it should be abstracted and made MP-safe. * (Hmm... where have we seen this warning before :-> GO ) */ static int raidlock(rs) struct raid_softc *rs; { int error; while ((rs->sc_flags & RAIDF_LOCKED) != 0) { rs->sc_flags |= RAIDF_WANTED; if ((error = tsleep(rs, PRIBIO | PCATCH, "raidlck", 0)) != 0) return (error); } rs->sc_flags |= RAIDF_LOCKED; return (0); } /* * Unlock and wake up any waiters. */ static void raidunlock(rs) struct raid_softc *rs; { rs->sc_flags &= ~RAIDF_LOCKED; if ((rs->sc_flags & RAIDF_WANTED) != 0) { rs->sc_flags &= ~RAIDF_WANTED; wakeup(rs); } } #define RF_COMPONENT_INFO_OFFSET 16384 /* bytes */ #define RF_COMPONENT_INFO_SIZE 1024 /* bytes */ int raidmarkclean(dev_t dev, struct vnode *b_vp, int mod_counter) { RF_ComponentLabel_t clabel; raidread_component_label(dev, b_vp, &clabel); clabel.mod_counter = mod_counter; clabel.clean = RF_RAID_CLEAN; raidwrite_component_label(dev, b_vp, &clabel); return(0); } int raidmarkdirty(dev_t dev, struct vnode *b_vp, int mod_counter) { RF_ComponentLabel_t clabel; raidread_component_label(dev, b_vp, &clabel); clabel.mod_counter = mod_counter; clabel.clean = RF_RAID_DIRTY; raidwrite_component_label(dev, b_vp, &clabel); return(0); } /* ARGSUSED */ int raidread_component_label(dev, b_vp, clabel) dev_t dev; struct vnode *b_vp; RF_ComponentLabel_t *clabel; { struct buf *bp; int error; /* XXX should probably ensure that we don't try to do this if someone has changed rf_protected_sectors. */ /* get a block of the appropriate size... */ bp = geteblk((int)RF_COMPONENT_INFO_SIZE); bp->b_dev = dev; /* get our ducks in a row for the read */ bp->b_blkno = RF_COMPONENT_INFO_OFFSET / DEV_BSIZE; bp->b_bcount = RF_COMPONENT_INFO_SIZE; bp->b_flags = B_BUSY | B_READ; bp->b_resid = RF_COMPONENT_INFO_SIZE / DEV_BSIZE; (*bdevsw[major(bp->b_dev)].d_strategy)(bp); error = biowait(bp); if (!error) { memcpy(clabel, bp->b_un.b_addr, sizeof(RF_ComponentLabel_t)); #if 0 print_component_label( clabel ); #endif } else { #if 0 printf("Failed to read RAID component label!\n"); #endif } bp->b_flags = B_INVAL | B_AGE; brelse(bp); return(error); } /* ARGSUSED */ int raidwrite_component_label(dev, b_vp, clabel) dev_t dev; struct vnode *b_vp; RF_ComponentLabel_t *clabel; { struct buf *bp; int error; /* get a block of the appropriate size... */ bp = geteblk((int)RF_COMPONENT_INFO_SIZE); bp->b_dev = dev; /* get our ducks in a row for the write */ bp->b_blkno = RF_COMPONENT_INFO_OFFSET / DEV_BSIZE; bp->b_bcount = RF_COMPONENT_INFO_SIZE; bp->b_flags = B_BUSY | B_WRITE; bp->b_resid = RF_COMPONENT_INFO_SIZE / DEV_BSIZE; memset( bp->b_un.b_addr, 0, RF_COMPONENT_INFO_SIZE ); memcpy( bp->b_un.b_addr, clabel, sizeof(RF_ComponentLabel_t)); (*bdevsw[major(bp->b_dev)].d_strategy)(bp); error = biowait(bp); bp->b_flags = B_INVAL | B_AGE; brelse(bp); if (error) { #if 1 printf("Failed to write RAID component info!\n"); #endif } return(error); } void rf_markalldirty( raidPtr ) RF_Raid_t *raidPtr; { RF_ComponentLabel_t clabel; int r,c; raidPtr->mod_counter++; for (r = 0; r < raidPtr->numRow; r++) { for (c = 0; c < raidPtr->numCol; c++) { if (raidPtr->Disks[r][c].status != rf_ds_failed) { raidread_component_label( raidPtr->Disks[r][c].dev, raidPtr->raid_cinfo[r][c].ci_vp, &clabel); if (clabel.status == rf_ds_spared) { /* XXX do something special... but whatever you do, don't try to access it!! */ } else { #if 0 clabel.status = raidPtr->Disks[r][c].status; raidwrite_component_label( raidPtr->Disks[r][c].dev, raidPtr->raid_cinfo[r][c].ci_vp, &clabel); #endif raidmarkdirty( raidPtr->Disks[r][c].dev, raidPtr->raid_cinfo[r][c].ci_vp, raidPtr->mod_counter); } } } } /* printf("Component labels marked dirty.\n"); */ #if 0 for( c = 0; c < raidPtr->numSpare ; c++) { sparecol = raidPtr->numCol + c; if (raidPtr->Disks[r][sparecol].status == rf_ds_used_spare) { /* XXX this is where we get fancy and map this spare into it's correct spot in the array. */ /* we claim this disk is "optimal" if it's rf_ds_used_spare, as that means it should be directly substitutable for the disk it replaced. We note that too... */ for(i=0;inumRow;i++) { for(j=0;jnumCol;j++) { if ((raidPtr->Disks[i][j].spareRow == r) && (raidPtr->Disks[i][j].spareCol == sparecol)) { srow = r; scol = sparecol; break; } } } raidread_component_label( raidPtr->Disks[r][sparecol].dev, raidPtr->raid_cinfo[r][sparecol].ci_vp, &clabel); /* make sure status is noted */ clabel.version = RF_COMPONENT_LABEL_VERSION; clabel.mod_counter = raidPtr->mod_counter; clabel.serial_number = raidPtr->serial_number; clabel.row = srow; clabel.column = scol; clabel.num_rows = raidPtr->numRow; clabel.num_columns = raidPtr->numCol; clabel.clean = RF_RAID_DIRTY; /* changed in a bit*/ clabel.status = rf_ds_optimal; raidwrite_component_label( raidPtr->Disks[r][sparecol].dev, raidPtr->raid_cinfo[r][sparecol].ci_vp, &clabel); raidmarkclean( raidPtr->Disks[r][sparecol].dev, raidPtr->raid_cinfo[r][sparecol].ci_vp); } } #endif } void rf_update_component_labels( raidPtr ) RF_Raid_t *raidPtr; { RF_ComponentLabel_t clabel; int sparecol; int r,c; int i,j; int srow, scol; srow = -1; scol = -1; /* XXX should do extra checks to make sure things really are clean, rather than blindly setting the clean bit... */ raidPtr->mod_counter++; for (r = 0; r < raidPtr->numRow; r++) { for (c = 0; c < raidPtr->numCol; c++) { if (raidPtr->Disks[r][c].status == rf_ds_optimal) { raidread_component_label( raidPtr->Disks[r][c].dev, raidPtr->raid_cinfo[r][c].ci_vp, &clabel); /* make sure status is noted */ clabel.status = rf_ds_optimal; raidwrite_component_label( raidPtr->Disks[r][c].dev, raidPtr->raid_cinfo[r][c].ci_vp, &clabel); if (raidPtr->parity_good == RF_RAID_CLEAN) { raidmarkclean( raidPtr->Disks[r][c].dev, raidPtr->raid_cinfo[r][c].ci_vp, raidPtr->mod_counter); } } /* else we don't touch it.. */ #if 0 else if (raidPtr->Disks[r][c].status != rf_ds_failed) { raidread_component_label( raidPtr->Disks[r][c].dev, raidPtr->raid_cinfo[r][c].ci_vp, &clabel); /* make sure status is noted */ clabel.status = raidPtr->Disks[r][c].status; raidwrite_component_label( raidPtr->Disks[r][c].dev, raidPtr->raid_cinfo[r][c].ci_vp, &clabel); if (raidPtr->parity_good == RF_RAID_CLEAN) { raidmarkclean( raidPtr->Disks[r][c].dev, raidPtr->raid_cinfo[r][c].ci_vp, raidPtr->mod_counter); } } #endif } } for( c = 0; c < raidPtr->numSpare ; c++) { sparecol = raidPtr->numCol + c; if (raidPtr->Disks[0][sparecol].status == rf_ds_used_spare) { /* we claim this disk is "optimal" if it's rf_ds_used_spare, as that means it should be directly substitutable for the disk it replaced. We note that too... */ for(i=0;inumRow;i++) { for(j=0;jnumCol;j++) { if ((raidPtr->Disks[i][j].spareRow == 0) && (raidPtr->Disks[i][j].spareCol == sparecol)) { srow = i; scol = j; break; } } } raidread_component_label( raidPtr->Disks[0][sparecol].dev, raidPtr->raid_cinfo[0][sparecol].ci_vp, &clabel); /* make sure status is noted */ clabel.version = RF_COMPONENT_LABEL_VERSION; clabel.mod_counter = raidPtr->mod_counter; clabel.serial_number = raidPtr->serial_number; clabel.row = srow; clabel.column = scol; clabel.num_rows = raidPtr->numRow; clabel.num_columns = raidPtr->numCol; clabel.clean = RF_RAID_DIRTY; /* changed in a bit*/ clabel.status = rf_ds_optimal; raidwrite_component_label( raidPtr->Disks[0][sparecol].dev, raidPtr->raid_cinfo[0][sparecol].ci_vp, &clabel); if (raidPtr->parity_good == RF_RAID_CLEAN) { raidmarkclean( raidPtr->Disks[0][sparecol].dev, raidPtr->raid_cinfo[0][sparecol].ci_vp, raidPtr->mod_counter); } } } /* printf("Component labels updated\n"); */ } void rf_ReconThread(req) struct rf_recon_req *req; { int s; RF_Raid_t *raidPtr; s = splbio(); raidPtr = (RF_Raid_t *) req->raidPtr; raidPtr->recon_in_progress = 1; rf_FailDisk((RF_Raid_t *) req->raidPtr, req->row, req->col, ((req->flags & RF_FDFLAGS_RECON) ? 1 : 0)); /* XXX get rid of this! we don't need it at all.. */ RF_Free(req, sizeof(*req)); raidPtr->recon_in_progress = 0; splx(s); /* That's all... */ kthread_exit(0); /* does not return */ } void rf_RewriteParityThread(raidPtr) RF_Raid_t *raidPtr; { int retcode; int s; raidPtr->parity_rewrite_in_progress = 1; s = splbio(); retcode = rf_RewriteParity(raidPtr); splx(s); if (retcode) { printf("raid%d: Error re-writing parity!\n",raidPtr->raidid); } else { /* set the clean bit! If we shutdown correctly, the clean bit on each component label will get set */ raidPtr->parity_good = RF_RAID_CLEAN; } raidPtr->parity_rewrite_in_progress = 0; /* That's all... */ kthread_exit(0); /* does not return */ } void rf_CopybackThread(raidPtr) RF_Raid_t *raidPtr; { int s; raidPtr->copyback_in_progress = 1; s = splbio(); rf_CopybackReconstructedData(raidPtr); splx(s); raidPtr->copyback_in_progress = 0; /* That's all... */ kthread_exit(0); /* does not return */ } void rf_ReconstructInPlaceThread(req) struct rf_recon_req *req; { int retcode; int s; RF_Raid_t *raidPtr; s = splbio(); raidPtr = req->raidPtr; raidPtr->recon_in_progress = 1; retcode = rf_ReconstructInPlace(raidPtr, req->row, req->col); RF_Free(req, sizeof(*req)); raidPtr->recon_in_progress = 0; splx(s); /* That's all... */ kthread_exit(0); /* does not return */ } void rf_mountroot_hook(dev) struct device *dev; { #if 1 printf("rf_mountroot_hook called for %s\n",dev->dv_xname); #endif if (boothowto & RB_ASKNAME) { /* We don't auto-config... */ } else { /* They didn't ask, and we found something bootable... */ /* XXX pretend for now.. */ if (raidautoconfig) { rootspec = raid_rooty; } } } RF_AutoConfig_t * rf_find_raid_components() { struct devnametobdevmaj *dtobdm; struct vnode *vp; struct disklabel label; struct device *dv; char *cd_name; dev_t dev; int error; int i; int good_one; RF_ComponentLabel_t *clabel; RF_AutoConfig_t *ac_list; RF_AutoConfig_t *ac; /* initialize the AutoConfig list */ ac_list = NULL; if (raidautoconfig) { /* we begin by trolling through *all* the devices on the system */ for (dv = alldevs.tqh_first; dv != NULL; dv = dv->dv_list.tqe_next) { /* we are only interested in disks... */ if (dv->dv_class != DV_DISK) continue; /* we don't care about floppies... */ if (!strcmp(dv->dv_cfdata->cf_driver->cd_name,"fd")) { continue; } /* need to find the device_name_to_block_device_major stuff */ cd_name = dv->dv_cfdata->cf_driver->cd_name; dtobdm = dev_name2blk; while (dtobdm->d_name && strcmp(dtobdm->d_name, cd_name)) { dtobdm++; } /* get a vnode for the raw partition of this disk */ dev = MAKEDISKDEV(dtobdm->d_maj, dv->dv_unit, RAW_PART); if (bdevvp(dev, &vp)) panic("RAID can't alloc vnode"); error = VOP_OPEN(vp, FREAD, NOCRED, 0); if (error) { /* "Who cares." Continue looking for something that exists*/ vput(vp); continue; } /* Ok, the disk exists. Go get the disklabel. */ error = VOP_IOCTL(vp, DIOCGDINFO, (caddr_t)&label, FREAD, NOCRED, 0); if (error) { /* * XXX can't happen - open() would * have errored out (or faked up one) */ printf("can't get label for dev %s%c (%d)!?!?\n", dv->dv_xname, 'a' + RAW_PART, error); } /* don't need this any more. We'll allocate it again a little later if we really do... */ VOP_CLOSE(vp, FREAD, NOCRED, 0); vput(vp); for (i=0; i < label.d_npartitions; i++) { /* We only support partitions marked as RAID */ if (label.d_partitions[i].p_fstype != FS_RAID) continue; dev = MAKEDISKDEV(dtobdm->d_maj, dv->dv_unit, i); if (bdevvp(dev, &vp)) panic("RAID can't alloc vnode"); error = VOP_OPEN(vp, FREAD, NOCRED, 0); if (error) { /* Whatever... */ vput(vp); continue; } good_one = 0; clabel = (RF_ComponentLabel_t *) malloc(sizeof(RF_ComponentLabel_t), M_RAIDFRAME, M_NOWAIT); if (clabel == NULL) { /* XXX CLEANUP HERE */ printf("RAID auto config: out of memory!\n"); return(NULL); /* XXX probably should panic? */ } if (!raidread_component_label(dev, vp, clabel)) { /* Got the label. Does it look reasonable? */ if (reasonable_label(clabel) && (clabel->partitionSize == label.d_partitions[i].p_size)) { #if DEBUG printf("Component on: %s%c: %d\n", dv->dv_xname, 'a'+i, label.d_partitions[i].p_size); print_component_label(clabel); #endif /* if it's reasonable, add it, else ignore it. */ ac = (RF_AutoConfig_t *) malloc(sizeof(RF_AutoConfig_t), M_RAIDFRAME, M_NOWAIT); if (ac == NULL) { /* XXX should panic?? */ return(NULL); } sprintf(ac->devname, "%s%c", dv->dv_xname, 'a'+i); ac->dev = dev; ac->vp = vp; ac->clabel = clabel; ac->next = ac_list; ac_list = ac; good_one = 1; } } if (!good_one) { /* cleanup */ free(clabel, M_RAIDFRAME); VOP_CLOSE(vp, FREAD, NOCRED, 0); vput(vp); } } } } return(ac_list); } static int reasonable_label(clabel) RF_ComponentLabel_t *clabel; { if (((clabel->version==RF_COMPONENT_LABEL_VERSION_1) || (clabel->version==RF_COMPONENT_LABEL_VERSION)) && ((clabel->clean == RF_RAID_CLEAN) || (clabel->clean == RF_RAID_DIRTY)) && clabel->row >=0 && clabel->column >= 0 && clabel->num_rows > 0 && clabel->num_columns > 0 && clabel->row < clabel->num_rows && clabel->column < clabel->num_columns && clabel->blockSize > 0 && clabel->numBlocks > 0) { /* label looks reasonable enough... */ return(1); } return(0); } void print_component_label(clabel) RF_ComponentLabel_t *clabel; { printf(" Row: %d Column: %d Num Rows: %d Num Columns: %d\n", clabel->row, clabel->column, clabel->num_rows, clabel->num_columns); printf(" Version: %d Serial Number: %d Mod Counter: %d\n", clabel->version, clabel->serial_number, clabel->mod_counter); printf(" Clean: %s Status: %d\n", clabel->clean ? "Yes" : "No", clabel->status ); printf(" sectPerSU: %d SUsPerPU: %d SUsPerRU: %d\n", clabel->sectPerSU, clabel->SUsPerPU, clabel->SUsPerRU); printf(" RAID Level: %c blocksize: %d numBlocks: %d\n", (char) clabel->parityConfig, clabel->blockSize, clabel->numBlocks); printf(" Autoconfig: %s\n", clabel->autoconfigure ? "Yes" : "No" ); printf(" Last configured as: raid%d\n", clabel->last_unit ); printf(" Config order: %d\n", clabel->config_order); } RF_ConfigSet_t * rf_create_auto_sets(ac_list) RF_AutoConfig_t *ac_list; { RF_AutoConfig_t *ac; RF_ConfigSet_t *config_sets; RF_ConfigSet_t *cset; RF_AutoConfig_t *ac_next; config_sets = NULL; /* Go through the AutoConfig list, and figure out which components belong to what sets. */ ac = ac_list; while(ac!=NULL) { /* we're going to putz with ac->next, so save it here for use at the end of the loop */ ac_next = ac->next; if (config_sets == NULL) { /* will need at least this one... */ config_sets = (RF_ConfigSet_t *) malloc(sizeof(RF_ConfigSet_t), M_RAIDFRAME, M_NOWAIT); if (config_sets == NULL) { panic("rf_create_auto_sets: No memory!\n"); } /* this one is easy :) */ config_sets->ac = ac; config_sets->next = NULL; ac->next = NULL; } else { /* which set does this component fit into? */ cset = config_sets; while(cset!=NULL) { if (does_it_fit(cset, ac)) { /* looks like it matches */ ac->next = cset->ac; cset->ac = ac; break; } cset = cset->next; } if (cset==NULL) { /* didn't find a match above... new set..*/ cset = (RF_ConfigSet_t *) malloc(sizeof(RF_ConfigSet_t), M_RAIDFRAME, M_NOWAIT); if (cset == NULL) { panic("rf_create_auto_sets: No memory!\n"); } cset->ac = ac; ac->next = NULL; cset->next = config_sets; config_sets = cset; } } ac = ac_next; } return(config_sets); } static int does_it_fit(cset, ac) RF_ConfigSet_t *cset; RF_AutoConfig_t *ac; { RF_ComponentLabel_t *clabel1, *clabel2; /* If this one matches the *first* one in the set, that's good enough, since the other members of the set would have been through here too... */ clabel1 = cset->ac->clabel; clabel2 = ac->clabel; if ((clabel1->version == clabel2->version) && (clabel1->serial_number == clabel2->serial_number) && (clabel1->mod_counter == clabel2->mod_counter) && (clabel1->num_rows == clabel2->num_rows) && (clabel1->num_columns == clabel2->num_columns) && (clabel1->sectPerSU == clabel2->sectPerSU) && (clabel1->SUsPerPU == clabel2->SUsPerPU) && (clabel1->SUsPerRU == clabel2->SUsPerRU) && (clabel1->parityConfig == clabel2->parityConfig) && (clabel1->maxOutstanding == clabel2->maxOutstanding) && (clabel1->blockSize == clabel2->blockSize) && (clabel1->numBlocks == clabel2->numBlocks) && (clabel1->autoconfigure == clabel2->autoconfigure) && (clabel1->root_partition == clabel2->root_partition) && (clabel1->last_unit == clabel2->last_unit) && (clabel1->config_order == clabel2->config_order)) { /* if it get's here, it almost *has* to be a match */ } else { /* it's not consistent with somebody in the set.. punt */ return(0); } /* all was fine.. it must fit... */ return(1); } #if 0 int have_enough(); int have_enough() { /* check to see that we have enough 'live' components of this set. If so, we can configure it if necessary */ } #endif void create_configuration(ac,config,raidPtr) RF_AutoConfig_t *ac; RF_Config_t *config; RF_Raid_t *raidPtr; { RF_ComponentLabel_t *clabel; clabel = ac->clabel; /* 1. Fill in the common stuff */ config->numRow = clabel->num_rows; config->numCol = clabel->num_columns; config->numSpare = 0; /* XXX should this be set here? */ config->sectPerSU = clabel->sectPerSU; config->SUsPerPU = clabel->SUsPerPU; config->SUsPerRU = clabel->SUsPerRU; config->parityConfig = clabel->parityConfig; /* XXX... */ strcpy(config->diskQueueType,"fifo"); config->maxOutstandingDiskReqs = clabel->maxOutstanding; config->layoutSpecificSize = 0; /* XXX ?? */ while(ac!=NULL) { /* row/col values will be in range due to the checks in reasonable_label() */ strcpy(config->devnames[ac->clabel->row][ac->clabel->column], ac->devname); ac = ac->next; } } int rf_set_autoconfig(raidPtr, new_value) RF_Raid_t *raidPtr; int new_value; { RF_ComponentLabel_t clabel; struct vnode *vp; dev_t dev; int row, column; for(row=0; rownumRow; row++) { for(column=0; columnnumCol; column++) { dev = raidPtr->Disks[row][column].dev; vp = raidPtr->raid_cinfo[row][column].ci_vp; raidread_component_label(dev, vp, &clabel); clabel.autoconfigure = new_value; raidwrite_component_label(dev, vp, &clabel); } } return(new_value); } int rf_set_rootpartition(raidPtr, new_value) RF_Raid_t *raidPtr; int new_value; { RF_ComponentLabel_t clabel; struct vnode *vp; dev_t dev; int row, column; for(row=0; rownumRow; row++) { for(column=0; columnnumCol; column++) { dev = raidPtr->Disks[row][column].dev; vp = raidPtr->raid_cinfo[row][column].ci_vp; raidread_component_label(dev, vp, &clabel); clabel.root_partition = new_value; raidwrite_component_label(dev, vp, &clabel); } } return(new_value); } void release_all_vps(cset) RF_ConfigSet_t *cset; { RF_AutoConfig_t *ac; ac = cset->ac; while(ac!=NULL) { /* Close the vp, and give it back */ if (ac->vp) { VOP_CLOSE(ac->vp, FREAD, NOCRED, 0); vput(ac->vp); } ac = ac->next; } } void cleanup_config_set(cset) RF_ConfigSet_t *cset; { RF_AutoConfig_t *ac; RF_AutoConfig_t *next_ac; ac = cset->ac; while(ac!=NULL) { next_ac = ac->next; /* nuke the label */ free(ac->clabel, M_RAIDFRAME); /* cleanup the config structure */ free(ac, M_RAIDFRAME); /* "next.." */ ac = next_ac; } /* and, finally, nuke the config set */ free(cset, M_RAIDFRAME); } void raid_init_component_label(raidPtr, clabel) RF_Raid_t *raidPtr; RF_ComponentLabel_t *clabel; { /* current version number */ clabel->version = RF_COMPONENT_LABEL_VERSION; clabel->serial_number = clabel->serial_number; clabel->mod_counter = raidPtr->mod_counter; clabel->num_rows = raidPtr->numRow; clabel->num_columns = raidPtr->numCol; clabel->clean = RF_RAID_DIRTY; /* not clean */ clabel->status = rf_ds_optimal; /* "It's good!" */ clabel->sectPerSU = raidPtr->Layout.sectorsPerStripeUnit; clabel->SUsPerPU = raidPtr->Layout.SUsPerPU; clabel->SUsPerRU = raidPtr->Layout.SUsPerRU; /* XXX not portable */ clabel->parityConfig = raidPtr->Layout.map->parityConfig; /* XXX THIS SHOULD BE SET RIGHT!! */ clabel->maxOutstanding = 100; clabel->autoconfigure = 0; clabel->root_partition = 0; clabel->last_unit = raidPtr->raidid; }