# $NetBSD: files.isa,v 1.129.2.5 2004/09/21 13:29:43 skrll Exp $ # # Config file and device description for machine-independent ISA code. # Included by ports that need it. Requires that the SCSI files be # defined first. # ports should specify appropriate major numbers for the following # devices: # mcd, scd, wd, wt device isa {[port = -1], [size = 0], [iomem = -1], [iosiz = 0], [irq = -1], [drq = -1], [drq2 = -1]} attach isa at isabus file dev/isa/isa.c isa needs-flag file dev/isa/isabusprint.c isabus # ISA DMA controller define isadma file dev/isa/isadma.c isadma needs-flag # # 8250/16[45]50-based multi-port serial boards # define commulti {[slave = -1]} file dev/isa/commultiprint.c commulti # AST 4-port board device ast: commulti attach ast at isa file dev/isa/ast.c ast # TC-800 8-port board device tcom: commulti attach tcom at isa file dev/isa/tcom.c tcom # BOCA 8-port board device boca: commulti attach boca at isa file dev/isa/boca.c boca # Addonics FlexPort multiport serial card device addcom: commulti attach addcom at isa with addcom_isa file dev/isa/addcom_isa.c addcom # IBM RT PC 4-port board device rtfps: commulti attach rtfps at isa file dev/isa/rtfps.c rtfps # BOCA 6-port board (3x 16552) device ioat: commulti attach ioat at isa file dev/isa/ioat66.c ioat # MOXA 8-port board device moxa: commulti attach moxa at isa with moxa_isa file dev/isa/moxa_isa.c moxa # # Serial and parallel drivers # attach com at isa with com_isa file dev/isa/com_isa.c com_isa attach com at commulti with com_multi file dev/isa/com_multi.c com_multi # Cyclades Cyclom-8/16/32 attach cy at isa with cy_isa file dev/isa/cy_isa.c cy_isa # PC-style parallel ports: ISA bus attachment (XXX what chip?) # XXX chip driver should be defined elsewhere attach lpt at isa with lpt_isa file dev/isa/lpt_isa.c lpt_isa & !ppbus # Parallel port chipset attach atppc at isa with atppc_isa: isadma file dev/isa/atppc_isa.c atppc_isa file dev/isa/atppc_isadma.c atppc_isa | atppc_acpi | atppc_pnpbios | atppc_ofisa | atppc_isapnp # # SCSI host adapters # # AdvanSys 514x family # device declaration in sys/conf/files attach adv at isa with adv_isa: isadma file dev/isa/adv_isa.c adv_isa # Adaptec AHA-154x family # device declaration in sys/conf/files attach aha at isa with aha_isa: isadma file dev/isa/aha_isa.c aha_isa # Adaptec AIC-6[32]60 ICs # device declaration in sys/conf/files attach aic at isa with aic_isa: isadma file dev/isa/aic_isa.c aic_isa # Qlogic ESP406/FAS408 boards # device declaration in sys/conf/files attach esp at isa with esp_isa: isadma file dev/isa/esp_isa.c esp_isa # BusLogic BT-[45]4x ISA family # device declaration in sys/conf/files attach bha at isa with bha_isa: isadma file dev/isa/bha_isa.c bha_isa # DPT SmartCache/SmartRAID III/IV ISA family # device declaration in sys/conf/files attach dpt at isa with dpt_isa: isadma file dev/isa/dpt_isa.c dpt_isa # Seagate ST0[12] ICs device sea: scsi, isadma attach sea at isa file dev/isa/seagate.c sea # UltraStor UHA-[13]4f boards # device declaration in sys/conf/files attach uha at isa with uha_isa: isadma file dev/isa/uha_isa.c uha_isa # Western Digital WD7000 and Future Domain TMC-7000 boards device wds: scsi, isadma attach wds at isa file dev/isa/wds.c wds # # Other ISA disk controllers # # Mitsumi CD-ROM controllers device mcd: disk attach mcd at isa file dev/isa/mcd.c mcd needs-flag defflag MCD_PROMISC # enable "promiscuous" match # Sony CDU-3[13]A CD-ROM drives device scd: disk attach scd at isa file dev/isa/scd.c scd needs-flag attach wdc at isa with wdc_isa file dev/isa/wdc_isa.c wdc_isa # Wangtek- and Archive-compatible tape controller boards device wt: tape, isadma attach wt at isa file dev/isa/wt.c wt needs-flag # # GPIB controllers # device cec: gpibdev attach cec at isa file dev/isa/cec.c cec # # ISA networking drivers # # WD/SMC 80x3 family, SMC Elite Ultra [8216], SMC EtherEZ # MUST be first: probe is non invasive, and registers are clobbered # by other drivers's probe # device declaration in sys/conf/files attach we at isa with we_isa file dev/isa/if_we_isa.c we_isa # 3Com common probe code define elink file dev/isa/elink.c elink # 3Com 3C503 device ec: ether, ifnet, arp, dp8390nic attach ec at isa file dev/isa/if_ec.c ec # 3Com 3C505 device eg: ether, ifnet, arp attach eg at isa file dev/isa/if_eg.c eg # 3Com 3C501 device el: ether, ifnet, arp attach el at isa file dev/isa/if_el.c el # 3Com 3C509 Ethernet controller # device declaration in sys/conf/files attach ep at isa with ep_isa: elink file dev/isa/if_ep_isa.c ep_isa # SDL Communications N2 PCI Network Interface # device in sys/conf/files attach ntwoc at isa with ntwoc_isa file dev/isa/if_ntwoc_isa.c ntwoc_isa # Allied Telesis MB8695-based boards # (Allied Telesis AT1700) # device in sys/conf/files attach ate at isa with ate_isa file dev/isa/if_ate.c ate_isa # Crystal Semiconductor CS8900, CS8920, and CS8920M Ethernet define cs_isa_common file dev/isa/cs89x0isa.c cs_isa_common attach cs at isa with cs_isa: cs_isa_common, isadma file dev/isa/if_cs_isa.c cs_isa # Fujitsu MB86960-based boards # (Fujitsu FMV-180 series) # device in sys/conf/files attach fmv at isa with fmv_isa file dev/isa/if_fmv_isa.c fmv_isa # HP Lan Ethernet controllers # XXX currently broken #device hp: ether, ifnet, arp #attach hp at isa #file dev/isa/if_hp.c hp # Intel i82595-based boards. # (Intel EtherExpress PRO) device iy: ether, ifnet, arp attach iy at isa file dev/isa/if_iy.c iy # the probe routine of this "recognizes" the iy. Probe after it. # NCR 5380-based boards attach nca at isa with nca_isa file dev/isa/nca_isa.c nca_isa # AMD am7990 (Lance) -based boards # (BICC Isolan, NE2100, DEPCA) # device declaration in sys/conf/files device nele {} attach nele at isa attach le at nele with le_nele: le24, isadma device bicc {} attach bicc at isa attach le at bicc with le_bicc: le24, isadma file dev/isa/if_le_isa.c nele | bicc attach depca at isa with depca_isa file dev/isa/depca_isa.c depca # DEC EtherWORKS III (LEMAC-based: DE203, DE204, DE205) cards attach lc at isa with lc_isa file dev/isa/if_lc_isa.c lc_isa # Novell NE1000, NE2000, and clones attach ne at isa with ne_isa: rtl80x9 file dev/isa/if_ne_isa.c ne_isa # SMC91Cxx Ethernet Controllers attach sm at isa with sm_isa file dev/isa/if_sm_isa.c sm_isa # 3Com 3C507 device ef: ether, ifnet, arp, elink, i82586 attach ef at isa file dev/isa/if_ef.c ef # AT&T StarLan boards device ai: ether, ifnet, arp, i82586 attach ai at isa file dev/isa/if_ai.c ai # EtherExpress/16 device ix: ether, ifnet, arp, i82586 attach ix at isa file dev/isa/if_ix.c ix # TROPIC based Token-Ring (IBM/3COM) define tr_isa file dev/isa/if_tr_isa.c tr_isa attach tr at isa with tr_isa: tr_isa, elink file dev/isa/if_tribm_isa.c tr_isa file dev/isa/if_trtcm_isa.c tr_isa # ISA NCR/AT&T/Lucent WaveLAN (non-802.11) card attach wl at isa with wl_isa: i82586, wavelan file dev/isa/if_wl_isa.c wl_isa # # ISA Sound hardware # # MPU401 MIDI UART compatibles attach mpu at isa with mpu_isa file dev/isa/mpu_isa.c mpu_isa # the SoundBlaster DSP, or close likenesses; used by other drivers define sbdsp { } file dev/isa/sbdsp.c sbdsp # SoundBlaster family device sb: audiobus, isadma, sbdsp, mulaw, auconv, midibus file dev/isa/sb.c sb needs-flag attach sb at isa with sb_isa file dev/isa/sb_isa.c sb_isa needs-flag attach opl at sbdsp with opl_sb file dev/isa/opl_sb.c opl_sb attach mpu at sbdsp with mpu_sb file dev/isa/mpu_sb.c mpu_sb # ProAudio Spectrum device pas: audiobus, isadma, sbdsp, mulaw, auconv attach pas at isa file dev/isa/pas.c pas needs-flag # AD1848 (CS4248, CS4231, AD1845) audio codec support; used by other drivers file dev/isa/ad1848_isa.c ad1848 # ICS2101 mixer chip support; used by other drivers define ics2101 file dev/isa/ics2101.c ics2101 # Audio systems based on Echo Speech Corp. ESC61[45] ASICs device pss {[port = -1], [size = 0], [iomem = -1], [iosiz = 0], [irq = -1], [drq = -1]} attach pss at isa device sp: audiobus, isadma, ad1848, auconv attach sp at pss file dev/isa/pss.c pss needs-flag # Microsoft Windows Sound System device wss { } : audiobus, isadma, ad1848, auconv file dev/isa/wss.c wss needs-flag attach wss at isa with wss_isa file dev/isa/wss_isa.c wss_isa needs-flag attach opl at wss with opl_wss file dev/isa/opl_wss.c opl_wss # ESS Technology ES1887/ES888/ES1888 device ess { } : audiobus, isadma, mulaw, auconv, midibus file dev/isa/ess.c ess needs-flag attach ess at isa with ess_isa file dev/isa/ess_isa.c ess_isa needs-flag attach opl at ess with opl_ess file dev/isa/opl_ess.c opl_ess attach joy at ess with joy_ess file dev/isa/joy_ess.c joy_ess needs-flag # Yamaha OPL2/OPL3 FM synth attach opl at isa with opl_isa file dev/isa/opl_isa.c opl_isa # Yamaha OPL3-SA3 device ym { }: audiobus, isadma, ad1848, auconv file dev/isa/ym.c ym defparam opt_ym.h YM_POWER_MODE YM_POWER_OFF_SEC attach opl at ym with opl_ym file dev/isa/opl_ym.c opl_ym attach mpu at ym with mpu_ym file dev/isa/mpu_ym.c mpu_ym needs-flag # Gravis UltraSound & UltraSound MAX. # Use the "drq2" keyword in a config file to specify an extra DMA # channel for full-duplex operation. device gus: audiobus, isadma, ics2101, ad1848, mulaw, auconv attach gus at isa file dev/isa/gus.c gus needs-flag # Sierra's Aria chipset. # (e.g. Prometheus Aria 16) device aria: audiobus, mulaw, auconv attach aria at isa file dev/isa/aria.c aria # Creative Music System (CMS) device cms: midibus attach cms at isa file dev/isa/cms.c cms # # PlanetConnect satellite receiver driver. # device satlink: isadma attach satlink at isa file dev/isa/satlink.c satlink needs-flag # ISA PC keyboard controller attach pckbc at isa with pckbc_isa file dev/isa/pckbc_isa.c pckbc_isa # generic ISA VGA attach vga at isa with vga_isa file dev/isa/vga_isa.c vga_isa needs-flag # generic EGA device ega: wsemuldisplaydev, pcdisplayops attach ega at isa file dev/isa/ega.c ega needs-flag # generic PC graphics adapter (MGA, CGA, ...) device pcdisplay: wsemuldisplaydev, pcdisplayops attach pcdisplay at isa file dev/isa/pcdisplay.c pcdisplay needs-flag # Middle Digital, Inc. PC-Weasel serial console board. # XXX This is a little gross... this is to conditionally compile # support for the PC-Weasel into the `pcdisplay' driver, # but we can't use an `option', because options can't have # attributes. defpseudo pcweasel: sysmon_wdog file dev/isa/weasel_isa.c pcweasel needs-flag # Sound Forte RadioLink SF16-FMR2 FM Radio Card device sf2r: radiodev, tea5757 attach sf2r at isa file dev/isa/sf16fmr2.c sf2r # Aztech/PackardBell FM Radio Card device az: radiodev, lm700x attach az at isa file dev/isa/aztech.c az # AIMS Lab Radiotrack & compatible device rt: radiodev, lm700x attach rt at isa file dev/isa/radiotrack.c rt # AIMS Lab Radiotrack II FM Radio Card device rtii: radiodev, tea5757 attach rtii at isa file dev/isa/radiotrack2.c rtii # PC PPI + TIMER 1 (speaker interface) device pcppi {} attach pcppi at isa file dev/isa/pcppi.c pcppi needs-flag device spkr attach spkr at pcppi file dev/isa/spkr.c spkr needs-flag attach midi at pcppi with midi_pcppi: midisyn file dev/isa/midi_pcppi.c midi_pcppi # # Environmental monitors # # LM78 temp/fanspeed monitor attach lm at isa with lm_isa file dev/isa/lm_isa.c lm_isa # ISDN devices attach isic at isa with isic_isa file dev/isa/isic_isa.c isic_isa attach daic at isa with daic_isa file dev/isa/daic_isa.c daic_isa defflag opt_isicisa.h ISICISA_TEL_S0_8 ISICISA_TEL_S0_16 ISICISA_TEL_S0_16_3 ISICISA_AVM_A1 ISICISA_USR_STI ISICISA_ITKIX1 file dev/isa/isic_isa_tel_s08.c isic_isa file dev/isa/isic_isa_tel_s016.c isic_isa file dev/isa/isic_isa_tel_s0163.c isic_isa file dev/isa/isic_isa_avm_a1.c isic_isa file dev/isa/isic_isa_usr_sti.c isic_isa file dev/isa/isic_isa_itk_ix1.c isic_isa # Game adapter (joystick) attach joy at isa with joy_isa file dev/isa/joy_isa.c joy_isa # NSC PC87366 Super IO / monitor chip device nsclpcsio: sysmon_envsys attach nsclpcsio at isa with nsclpcsio_isa file dev/isa/nsclpcsio_isa.c nsclpcsio_isa # USB Controller attach slhci at isa with slhci_isa file dev/isa/slhci_isa.c slhci_isa # # ISA Plug 'n Play autoconfiguration glue. # THIS MUST COME AFTER ALL MI ISA DEVICES ARE DEFINED. This is because # ISA PnP devices often use `device' declarations listed in this file. # include "dev/isapnp/files.isapnp"