/* $NetBSD: ata.c,v 1.18.2.3 2004/08/25 06:57:34 skrll Exp $ */ /* * Copyright (c) 1998, 2001 Manuel Bouyer. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Manuel Bouyer. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __KERNEL_RCSID(0, "$NetBSD: ata.c,v 1.18.2.3 2004/08/25 06:57:34 skrll Exp $"); #ifndef ATADEBUG #define ATADEBUG #endif /* ATADEBUG */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "locators.h" #include "atapibus.h" #include "ataraid.h" #if NATARAID > 0 #include #endif #define DEBUG_FUNCS 0x08 #define DEBUG_PROBE 0x10 #define DEBUG_DETACH 0x20 #define DEBUG_XFERS 0x40 #ifdef ATADEBUG int atadebug_mask = 0; #define ATADEBUG_PRINT(args, level) \ if (atadebug_mask & (level)) \ printf args #else #define ATADEBUG_PRINT(args, level) #endif POOL_INIT(ata_xfer_pool, sizeof(struct ata_xfer), 0, 0, 0, "ataspl", NULL); /* * A queue of atabus instances, used to ensure the same bus probe order * for a given hardware configuration at each boot. */ struct atabus_initq_head atabus_initq_head = TAILQ_HEAD_INITIALIZER(atabus_initq_head); struct simplelock atabus_interlock = SIMPLELOCK_INITIALIZER; /***************************************************************************** * ATA bus layer. * * ATA controllers attach an atabus instance, which handles probing the bus * for drives, etc. *****************************************************************************/ dev_type_open(atabusopen); dev_type_close(atabusclose); dev_type_ioctl(atabusioctl); const struct cdevsw atabus_cdevsw = { atabusopen, atabusclose, noread, nowrite, atabusioctl, nostop, notty, nopoll, nommap, nokqfilter, }; extern struct cfdriver atabus_cd; /* * atabusprint: * * Autoconfiguration print routine used by ATA controllers when * attaching an atabus instance. */ int atabusprint(void *aux, const char *pnp) { struct ata_channel *chan = aux; if (pnp) aprint_normal("atabus at %s", pnp); aprint_normal(" channel %d", chan->ch_channel); return (UNCONF); } /* * ataprint: * * Autoconfiguration print routine. */ int ataprint(void *aux, const char *pnp) { struct ata_device *adev = aux; if (pnp) aprint_normal("wd at %s", pnp); aprint_normal(" drive %d", adev->adev_drv_data->drive); return (UNCONF); } /* * ata_channel_attach: * * Common parts of attaching an atabus to an ATA controller channel. */ void ata_channel_attach(struct ata_channel *chp) { if (chp->ch_flags & ATACH_DISABLED) return; callout_init(&chp->ch_callout); TAILQ_INIT(&chp->ch_queue->queue_xfer); chp->ch_queue->queue_freeze = 0; chp->ch_queue->active_xfer = NULL; chp->atabus = config_found(&chp->ch_atac->atac_dev, chp, atabusprint); } static void atabusconfig(struct atabus_softc *atabus_sc) { struct ata_channel *chp = atabus_sc->sc_chan; struct atac_softc *atac = chp->ch_atac; int i, s; struct atabus_initq *atabus_initq = NULL; /* Probe for the drives. */ (*atac->atac_probe)(chp); ATADEBUG_PRINT(("atabusattach: ch_drive_flags 0x%x 0x%x\n", chp->ch_drive[0].drive_flags, chp->ch_drive[1].drive_flags), DEBUG_PROBE); /* If no drives, abort here */ for (i = 0; i < chp->ch_ndrive; i++) if ((chp->ch_drive[i].drive_flags & DRIVE) != 0) break; if (i == chp->ch_ndrive) goto out; /* Shortcut in case we've been shutdown */ if (chp->ch_flags & ATACH_SHUTDOWN) goto out; /* Make sure the devices probe in atabus order to avoid jitter. */ simple_lock(&atabus_interlock); while(1) { atabus_initq = TAILQ_FIRST(&atabus_initq_head); if (atabus_initq->atabus_sc == atabus_sc) break; ltsleep(&atabus_initq_head, PRIBIO, "ata_initq", 0, &atabus_interlock); } simple_unlock(&atabus_interlock); /* * Attach an ATAPI bus, if needed. */ for (i = 0; i < chp->ch_ndrive; i++) { if (chp->ch_drive[i].drive_flags & DRIVE_ATAPI) { #if NATAPIBUS > 0 (*atac->atac_atapibus_attach)(atabus_sc); #else /* * Fake the autoconfig "not configured" message */ aprint_normal("atapibus at %s not configured\n", atac->atac_dev.dv_xname); chp->atapibus = NULL; s = splbio(); for (i = 0; i < chp->ch_ndrive; i++) chp->ch_drive[i].drive_flags &= ~DRIVE_ATAPI; splx(s); #endif break; } } for (i = 0; i < chp->ch_ndrive; i++) { struct ata_device adev; if ((chp->ch_drive[i].drive_flags & (DRIVE_ATA | DRIVE_OLD)) == 0) { continue; } memset(&adev, 0, sizeof(struct ata_device)); adev.adev_bustype = atac->atac_bustype_ata; adev.adev_channel = chp->ch_channel; adev.adev_openings = 1; adev.adev_drv_data = &chp->ch_drive[i]; chp->ata_drives[i] = config_found(&atabus_sc->sc_dev, &adev, ataprint); if (chp->ata_drives[i] != NULL) ata_probe_caps(&chp->ch_drive[i]); else { s = splbio(); chp->ch_drive[i].drive_flags &= ~(DRIVE_ATA | DRIVE_OLD); splx(s); } } /* now that we know the drives, the controller can set its modes */ if (atac->atac_set_modes) { (*atac->atac_set_modes)(chp); ata_print_modes(chp); } #if NATARAID > 0 if (atac->atac_cap & ATAC_CAP_RAID) for (i = 0; i < chp->ch_ndrive; i++) if (chp->ata_drives[i] != NULL) ata_raid_check_component(chp->ata_drives[i]); #endif /* NATARAID > 0 */ /* * reset drive_flags for unattached devices, reset state for attached * ones */ s = splbio(); for (i = 0; i < chp->ch_ndrive; i++) { if (chp->ch_drive[i].drv_softc == NULL) chp->ch_drive[i].drive_flags = 0; else chp->ch_drive[i].state = 0; } splx(s); out: if (atabus_initq == NULL) { simple_lock(&atabus_interlock); while(1) { atabus_initq = TAILQ_FIRST(&atabus_initq_head); if (atabus_initq->atabus_sc == atabus_sc) break; ltsleep(&atabus_initq_head, PRIBIO, "ata_initq", 0, &atabus_interlock); } simple_unlock(&atabus_interlock); } simple_lock(&atabus_interlock); TAILQ_REMOVE(&atabus_initq_head, atabus_initq, atabus_initq); simple_unlock(&atabus_interlock); free(atabus_initq, M_DEVBUF); wakeup(&atabus_initq_head); ata_delref(chp); config_pending_decr(); } /* * atabus_thread: * * Worker thread for the ATA bus. */ static void atabus_thread(void *arg) { struct atabus_softc *sc = arg; struct ata_channel *chp = sc->sc_chan; struct ata_xfer *xfer; int i, s; s = splbio(); chp->ch_flags |= ATACH_TH_RUN; /* * Probe the drives. Reset all flags to 0 to indicate to controllers * that can re-probe that all drives must be probed.. * * Note: ch_ndrive may be changed during the probe. */ for (i = 0; i < ATA_MAXDRIVES; i++) chp->ch_drive[i].drive_flags = 0; splx(s); /* Configure the devices on the bus. */ atabusconfig(sc); for (;;) { s = splbio(); if ((chp->ch_flags & (ATACH_TH_RESET | ATACH_SHUTDOWN)) == 0 && (chp->ch_queue->active_xfer == NULL || chp->ch_queue->queue_freeze == 0)) { chp->ch_flags &= ~ATACH_TH_RUN; (void) tsleep(&chp->ch_thread, PRIBIO, "atath", 0); chp->ch_flags |= ATACH_TH_RUN; } if (chp->ch_flags & ATACH_SHUTDOWN) { splx(s); break; } if (chp->ch_flags & ATACH_TH_RESET) { /* * ata_reset_channel() will freeze 2 times, so * unfreeze one time. Not a problem as we're at splbio */ chp->ch_queue->queue_freeze--; ata_reset_channel(chp, AT_WAIT | chp->ch_reset_flags); } else if (chp->ch_queue->active_xfer != NULL && chp->ch_queue->queue_freeze == 1) { /* * Caller has bumped queue_freeze, decrease it. */ chp->ch_queue->queue_freeze--; xfer = chp->ch_queue->active_xfer; KASSERT(xfer != NULL); (*xfer->c_start)(chp, xfer); } else if (chp->ch_queue->queue_freeze > 1) panic("ata_thread: queue_freeze"); splx(s); } chp->ch_thread = NULL; wakeup((void *)&chp->ch_flags); kthread_exit(0); } /* * atabus_create_thread: * * Helper routine to create the ATA bus worker thread. */ static void atabus_create_thread(void *arg) { struct atabus_softc *sc = arg; struct ata_channel *chp = sc->sc_chan; int error; if ((error = kthread_create1(atabus_thread, sc, &chp->ch_thread, "%s", sc->sc_dev.dv_xname)) != 0) aprint_error("%s: unable to create kernel thread: error %d\n", sc->sc_dev.dv_xname, error); } /* * atabus_match: * * Autoconfiguration match routine. */ static int atabus_match(struct device *parent, struct cfdata *cf, void *aux) { struct ata_channel *chp = aux; if (chp == NULL) return (0); if (cf->cf_loc[ATACF_CHANNEL] != chp->ch_channel && cf->cf_loc[ATACF_CHANNEL] != ATACF_CHANNEL_DEFAULT) return (0); return (1); } /* * atabus_attach: * * Autoconfiguration attach routine. */ static void atabus_attach(struct device *parent, struct device *self, void *aux) { struct atabus_softc *sc = (void *) self; struct ata_channel *chp = aux; struct atabus_initq *initq; sc->sc_chan = chp; aprint_normal("\n"); aprint_naive("\n"); if (ata_addref(chp)) return; initq = malloc(sizeof(*initq), M_DEVBUF, M_WAITOK); initq->atabus_sc = sc; TAILQ_INSERT_TAIL(&atabus_initq_head, initq, atabus_initq); config_pending_incr(); kthread_create(atabus_create_thread, sc); } /* * atabus_activate: * * Autoconfiguration activation routine. */ static int atabus_activate(struct device *self, enum devact act) { struct atabus_softc *sc = (void *) self; struct ata_channel *chp = sc->sc_chan; struct device *dev = NULL; int s, i, error = 0; s = splbio(); switch (act) { case DVACT_ACTIVATE: error = EOPNOTSUPP; break; case DVACT_DEACTIVATE: /* * We might deactivate the children of atapibus twice * (once bia atapibus, once directly), but since the * generic autoconfiguration code maintains the DVF_ACTIVE * flag, it's safe. */ if ((dev = chp->atapibus) != NULL) { error = config_deactivate(dev); if (error) goto out; } for (i = 0; i < chp->ch_ndrive; i++) { if ((dev = chp->ch_drive[i].drv_softc) != NULL) { ATADEBUG_PRINT(("atabus_activate: %s: " "deactivating %s\n", sc->sc_dev.dv_xname, dev->dv_xname), DEBUG_DETACH); error = config_deactivate(dev); if (error) goto out; } } break; } out: splx(s); #ifdef ATADEBUG if (dev != NULL && error != 0) ATADEBUG_PRINT(("atabus_activate: %s: " "error %d deactivating %s\n", sc->sc_dev.dv_xname, error, dev->dv_xname), DEBUG_DETACH); #endif /* ATADEBUG */ return (error); } /* * atabus_detach: * * Autoconfiguration detach routine. */ static int atabus_detach(struct device *self, int flags) { struct atabus_softc *sc = (void *) self; struct ata_channel *chp = sc->sc_chan; struct device *dev = NULL; int s, i, error = 0; /* Shutdown the channel. */ s = splbio(); /* XXX ALSO NEED AN INTERLOCK HERE. */ chp->ch_flags |= ATACH_SHUTDOWN; splx(s); wakeup(&chp->ch_thread); while (chp->ch_thread != NULL) (void) tsleep((void *)&chp->ch_flags, PRIBIO, "atadown", 0); /* * Detach atapibus and its children. */ if ((dev = chp->atapibus) != NULL) { ATADEBUG_PRINT(("atabus_detach: %s: detaching %s\n", sc->sc_dev.dv_xname, dev->dv_xname), DEBUG_DETACH); error = config_detach(dev, flags); if (error) goto out; } /* * Detach our other children. */ for (i = 0; i < chp->ch_ndrive; i++) { if (chp->ch_drive[i].drive_flags & DRIVE_ATAPI) continue; if ((dev = chp->ch_drive[i].drv_softc) != NULL) { ATADEBUG_PRINT(("atabus_detach: %s: detaching %s\n", sc->sc_dev.dv_xname, dev->dv_xname), DEBUG_DETACH); error = config_detach(dev, flags); if (error) goto out; } } out: #ifdef ATADEBUG if (dev != NULL && error != 0) ATADEBUG_PRINT(("atabus_detach: %s: error %d detaching %s\n", sc->sc_dev.dv_xname, error, dev->dv_xname), DEBUG_DETACH); #endif /* ATADEBUG */ return (error); } CFATTACH_DECL(atabus, sizeof(struct atabus_softc), atabus_match, atabus_attach, atabus_detach, atabus_activate); /***************************************************************************** * Common ATA bus operations. *****************************************************************************/ /* Get the disk's parameters */ int ata_get_params(struct ata_drive_datas *drvp, u_int8_t flags, struct ataparams *prms) { char tb[DEV_BSIZE]; struct ata_command ata_c; struct ata_channel *chp = drvp->chnl_softc; struct atac_softc *atac = chp->ch_atac; #if BYTE_ORDER == LITTLE_ENDIAN int i; u_int16_t *p; #endif ATADEBUG_PRINT(("ata_get_parms\n"), DEBUG_FUNCS); memset(tb, 0, DEV_BSIZE); memset(prms, 0, sizeof(struct ataparams)); memset(&ata_c, 0, sizeof(struct ata_command)); if (drvp->drive_flags & DRIVE_ATA) { ata_c.r_command = WDCC_IDENTIFY; ata_c.r_st_bmask = WDCS_DRDY; ata_c.r_st_pmask = 0; ata_c.timeout = 3000; /* 3s */ } else if (drvp->drive_flags & DRIVE_ATAPI) { ata_c.r_command = ATAPI_IDENTIFY_DEVICE; ata_c.r_st_bmask = 0; ata_c.r_st_pmask = 0; ata_c.timeout = 10000; /* 10s */ } else { ATADEBUG_PRINT(("ata_get_parms: no disks\n"), DEBUG_FUNCS|DEBUG_PROBE); return CMD_ERR; } ata_c.flags = AT_READ | flags; ata_c.data = tb; ata_c.bcount = DEV_BSIZE; if ((*atac->atac_bustype_ata->ata_exec_command)(drvp, &ata_c) != ATACMD_COMPLETE) { ATADEBUG_PRINT(("ata_get_parms: wdc_exec_command failed\n"), DEBUG_FUNCS|DEBUG_PROBE); return CMD_AGAIN; } if (ata_c.flags & (AT_ERROR | AT_TIMEOU | AT_DF)) { ATADEBUG_PRINT(("ata_get_parms: ata_c.flags=0x%x\n", ata_c.flags), DEBUG_FUNCS|DEBUG_PROBE); return CMD_ERR; } else { /* if we didn't read any data something is wrong */ if ((ata_c.flags & AT_XFDONE) == 0) return CMD_ERR; /* Read in parameter block. */ memcpy(prms, tb, sizeof(struct ataparams)); #if BYTE_ORDER == LITTLE_ENDIAN /* * Shuffle string byte order. * ATAPI Mitsumi and NEC drives don't need this. */ if ((prms->atap_config & WDC_CFG_ATAPI_MASK) == WDC_CFG_ATAPI && ((prms->atap_model[0] == 'N' && prms->atap_model[1] == 'E') || (prms->atap_model[0] == 'F' && prms->atap_model[1] == 'X'))) return 0; for (i = 0; i < sizeof(prms->atap_model); i += 2) { p = (u_short *)(prms->atap_model + i); *p = ntohs(*p); } for (i = 0; i < sizeof(prms->atap_serial); i += 2) { p = (u_short *)(prms->atap_serial + i); *p = ntohs(*p); } for (i = 0; i < sizeof(prms->atap_revision); i += 2) { p = (u_short *)(prms->atap_revision + i); *p = ntohs(*p); } #endif return CMD_OK; } } int ata_set_mode(struct ata_drive_datas *drvp, u_int8_t mode, u_int8_t flags) { struct ata_command ata_c; struct ata_channel *chp = drvp->chnl_softc; struct atac_softc *atac = chp->ch_atac; ATADEBUG_PRINT(("ata_set_mode=0x%x\n", mode), DEBUG_FUNCS); memset(&ata_c, 0, sizeof(struct ata_command)); ata_c.r_command = SET_FEATURES; ata_c.r_st_bmask = 0; ata_c.r_st_pmask = 0; ata_c.r_features = WDSF_SET_MODE; ata_c.r_count = mode; ata_c.flags = flags; ata_c.timeout = 1000; /* 1s */ if ((*atac->atac_bustype_ata->ata_exec_command)(drvp, &ata_c) != ATACMD_COMPLETE) return CMD_AGAIN; if (ata_c.flags & (AT_ERROR | AT_TIMEOU | AT_DF)) { return CMD_ERR; } return CMD_OK; } void ata_dmaerr(struct ata_drive_datas *drvp, int flags) { /* * Downgrade decision: if we get NERRS_MAX in NXFER. * We start with n_dmaerrs set to NERRS_MAX-1 so that the * first error within the first NXFER ops will immediatly trigger * a downgrade. * If we got an error and n_xfers is bigger than NXFER reset counters. */ drvp->n_dmaerrs++; if (drvp->n_dmaerrs >= NERRS_MAX && drvp->n_xfers <= NXFER) { ata_downgrade_mode(drvp, flags); drvp->n_dmaerrs = NERRS_MAX-1; drvp->n_xfers = 0; return; } if (drvp->n_xfers > NXFER) { drvp->n_dmaerrs = 1; /* just got an error */ drvp->n_xfers = 1; /* restart counting from this error */ } } /* * Add a command to the queue and start controller. * * MUST BE CALLED AT splbio()! */ void ata_exec_xfer(struct ata_channel *chp, struct ata_xfer *xfer) { ATADEBUG_PRINT(("ata_exec_xfer %p channel %d drive %d\n", xfer, chp->ch_channel, xfer->c_drive), DEBUG_XFERS); /* complete xfer setup */ xfer->c_chp = chp; /* insert at the end of command list */ TAILQ_INSERT_TAIL(&chp->ch_queue->queue_xfer, xfer, c_xferchain); ATADEBUG_PRINT(("atastart from ata_exec_xfer, flags 0x%x\n", chp->ch_flags), DEBUG_XFERS); atastart(chp); } /* * Start I/O on a controller, for the given channel. * The first xfer may be not for our channel if the channel queues * are shared. * * MUST BE CALLED AT splbio()! */ void atastart(struct ata_channel *chp) { struct atac_softc *atac = chp->ch_atac; struct ata_xfer *xfer; #ifdef ATA_DEBUG int spl1, spl2; spl1 = splbio(); spl2 = splbio(); if (spl2 != spl1) { printf("atastart: not at splbio()\n"); panic("atastart"); } splx(spl2); splx(spl1); #endif /* ATA_DEBUG */ /* is there a xfer ? */ if ((xfer = TAILQ_FIRST(&chp->ch_queue->queue_xfer)) == NULL) return; /* adjust chp, in case we have a shared queue */ chp = xfer->c_chp; if (chp->ch_queue->active_xfer != NULL) { return; /* channel aleady active */ } if (__predict_false(chp->ch_queue->queue_freeze > 0)) { return; /* queue froozen */ } #ifdef DIAGNOSTIC if ((chp->ch_flags & ATACH_IRQ_WAIT) != 0) panic("atastart: channel waiting for irq"); #endif if (atac->atac_claim_hw) if (!(*atac->atac_claim_hw)(chp, 0)) return; ATADEBUG_PRINT(("atastart: xfer %p channel %d drive %d\n", xfer, chp->ch_channel, xfer->c_drive), DEBUG_XFERS); if (chp->ch_drive[xfer->c_drive].drive_flags & DRIVE_RESET) { chp->ch_drive[xfer->c_drive].drive_flags &= ~DRIVE_RESET; chp->ch_drive[xfer->c_drive].state = 0; } chp->ch_queue->active_xfer = xfer; TAILQ_REMOVE(&chp->ch_queue->queue_xfer, xfer, c_xferchain); if (atac->atac_cap & ATAC_CAP_NOIRQ) KASSERT(xfer->c_flags & C_POLL); xfer->c_start(chp, xfer); } struct ata_xfer * ata_get_xfer(int flags) { struct ata_xfer *xfer; int s; s = splbio(); xfer = pool_get(&ata_xfer_pool, ((flags & ATAXF_NOSLEEP) != 0 ? PR_NOWAIT : PR_WAITOK)); splx(s); if (xfer != NULL) { memset(xfer, 0, sizeof(struct ata_xfer)); } return xfer; } void ata_free_xfer(struct ata_channel *chp, struct ata_xfer *xfer) { struct atac_softc *atac = chp->ch_atac; int s; if (atac->atac_free_hw) (*atac->atac_free_hw)(chp); s = splbio(); pool_put(&ata_xfer_pool, xfer); splx(s); } /* * Kill off all pending xfers for a ata_channel. * * Must be called at splbio(). */ void ata_kill_pending(struct ata_drive_datas *drvp) { struct ata_channel *chp = drvp->chnl_softc; struct ata_xfer *xfer, *next_xfer; int s = splbio(); for (xfer = TAILQ_FIRST(&chp->ch_queue->queue_xfer); xfer != NULL; xfer = next_xfer) { next_xfer = TAILQ_NEXT(xfer, c_xferchain); if (xfer->c_chp != chp || xfer->c_drive != drvp->drive) continue; TAILQ_REMOVE(&chp->ch_queue->queue_xfer, xfer, c_xferchain); (*xfer->c_kill_xfer)(chp, xfer, KILL_GONE); } while ((xfer = chp->ch_queue->active_xfer) != NULL) { if (xfer->c_chp == chp && xfer->c_drive == drvp->drive) { drvp->drive_flags |= DRIVE_WAITDRAIN; (void) tsleep(&chp->ch_queue->active_xfer, PRIBIO, "atdrn", 0); } else { /* no more xfer for us */ break; } } splx(s); } /* * ata_reset_channel: * * Reset and ATA channel. * * MUST BE CALLED AT splbio()! */ void ata_reset_channel(struct ata_channel *chp, int flags) { struct atac_softc *atac = chp->ch_atac; int drive; #ifdef ATA_DEBUG int spl1, spl2; spl1 = splbio(); spl2 = splbio(); if (spl2 != spl1) { printf("ata_reset_channel: not at splbio()\n"); panic("ata_reset_channel"); } splx(spl2); splx(spl1); #endif /* ATA_DEBUG */ chp->ch_queue->queue_freeze++; /* * If we can poll or wait it's OK, otherwise wake up the * kernel thread to do it for us. */ if ((flags & (AT_POLL | AT_WAIT)) == 0) { if (chp->ch_flags & ATACH_TH_RESET) { /* No need to schedule a reset more than one time. */ return; } chp->ch_flags |= ATACH_TH_RESET; chp->ch_reset_flags = flags & (AT_RST_EMERG | AT_RST_NOCMD); wakeup(&chp->ch_thread); return; } (*atac->atac_bustype_ata->ata_reset_channel)(chp, flags); for (drive = 0; drive < chp->ch_ndrive; drive++) chp->ch_drive[drive].state = 0; chp->ch_flags &= ~ATACH_TH_RESET; if ((flags & AT_RST_EMERG) == 0) { chp->ch_queue->queue_freeze--; atastart(chp); } else { /* make sure that we can use polled commands */ TAILQ_INIT(&chp->ch_queue->queue_xfer); chp->ch_queue->queue_freeze = 0; chp->ch_queue->active_xfer = NULL; } } int ata_addref(struct ata_channel *chp) { struct atac_softc *atac = chp->ch_atac; struct scsipi_adapter *adapt = &atac->atac_atapi_adapter._generic; int s, error = 0; s = splbio(); if (adapt->adapt_refcnt++ == 0 && adapt->adapt_enable != NULL) { error = (*adapt->adapt_enable)(&atac->atac_dev, 1); if (error) adapt->adapt_refcnt--; } splx(s); return (error); } void ata_delref(struct ata_channel *chp) { struct atac_softc *atac = chp->ch_atac; struct scsipi_adapter *adapt = &atac->atac_atapi_adapter._generic; int s; s = splbio(); if (adapt->adapt_refcnt-- == 1 && adapt->adapt_enable != NULL) (void) (*adapt->adapt_enable)(&atac->atac_dev, 0); splx(s); } void ata_print_modes(struct ata_channel *chp) { struct atac_softc *atac = chp->ch_atac; int drive; struct ata_drive_datas *drvp; for (drive = 0; drive < 2; drive++) { drvp = &chp->ch_drive[drive]; if ((drvp->drive_flags & DRIVE) == 0) continue; aprint_normal("%s(%s:%d:%d): using PIO mode %d", drvp->drv_softc->dv_xname, atac->atac_dev.dv_xname, chp->ch_channel, drive, drvp->PIO_mode); if (drvp->drive_flags & DRIVE_DMA) aprint_normal(", DMA mode %d", drvp->DMA_mode); if (drvp->drive_flags & DRIVE_UDMA) { aprint_normal(", Ultra-DMA mode %d", drvp->UDMA_mode); if (drvp->UDMA_mode == 2) aprint_normal(" (Ultra/33)"); else if (drvp->UDMA_mode == 4) aprint_normal(" (Ultra/66)"); else if (drvp->UDMA_mode == 5) aprint_normal(" (Ultra/100)"); else if (drvp->UDMA_mode == 6) aprint_normal(" (Ultra/133)"); } if (drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA)) aprint_normal(" (using DMA data transfers)"); aprint_normal("\n"); } } /* * downgrade the transfer mode of a drive after an error. return 1 if * downgrade was possible, 0 otherwise. * * MUST BE CALLED AT splbio()! */ int ata_downgrade_mode(struct ata_drive_datas *drvp, int flags) { struct ata_channel *chp = drvp->chnl_softc; struct atac_softc *atac = chp->ch_atac; struct device *drv_dev = drvp->drv_softc; int cf_flags = drv_dev->dv_cfdata->cf_flags; /* if drive or controller don't know its mode, we can't do much */ if ((drvp->drive_flags & DRIVE_MODE) == 0 || (atac->atac_set_modes == NULL)) return 0; /* current drive mode was set by a config flag, let it this way */ if ((cf_flags & ATA_CONFIG_PIO_SET) || (cf_flags & ATA_CONFIG_DMA_SET) || (cf_flags & ATA_CONFIG_UDMA_SET)) return 0; /* * If we were using Ultra-DMA mode, downgrade to the next lower mode. */ if ((drvp->drive_flags & DRIVE_UDMA) && drvp->UDMA_mode >= 2) { drvp->UDMA_mode--; printf("%s: transfer error, downgrading to Ultra-DMA mode %d\n", drv_dev->dv_xname, drvp->UDMA_mode); } /* * If we were using ultra-DMA, don't downgrade to multiword DMA. */ else if (drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA)) { drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA); drvp->PIO_mode = drvp->PIO_cap; printf("%s: transfer error, downgrading to PIO mode %d\n", drv_dev->dv_xname, drvp->PIO_mode); } else /* already using PIO, can't downgrade */ return 0; (*atac->atac_set_modes)(chp); ata_print_modes(chp); /* reset the channel, which will shedule all drives for setup */ ata_reset_channel(chp, flags | AT_RST_NOCMD); return 1; } /* * Probe drive's capabilities, for use by the controller later * Assumes drvp points to an existing drive. */ void ata_probe_caps(struct ata_drive_datas *drvp) { struct ataparams params, params2; struct ata_channel *chp = drvp->chnl_softc; struct atac_softc *atac = chp->ch_atac; struct device *drv_dev = drvp->drv_softc; int i, printed, s; char *sep = ""; int cf_flags; if (ata_get_params(drvp, AT_WAIT, ¶ms) != CMD_OK) { /* IDENTIFY failed. Can't tell more about the device */ return; } if ((atac->atac_cap & (ATAC_CAP_DATA16 | ATAC_CAP_DATA32)) == (ATAC_CAP_DATA16 | ATAC_CAP_DATA32)) { /* * Controller claims 16 and 32 bit transfers. * Re-do an IDENTIFY with 32-bit transfers, * and compare results. */ s = splbio(); drvp->drive_flags |= DRIVE_CAP32; splx(s); ata_get_params(drvp, AT_WAIT, ¶ms2); if (memcmp(¶ms, ¶ms2, sizeof(struct ataparams)) != 0) { /* Not good. fall back to 16bits */ s = splbio(); drvp->drive_flags &= ~DRIVE_CAP32; splx(s); } else { aprint_normal("%s: 32-bit data port\n", drv_dev->dv_xname); } } #if 0 /* Some ultra-DMA drives claims to only support ATA-3. sigh */ if (params.atap_ata_major > 0x01 && params.atap_ata_major != 0xffff) { for (i = 14; i > 0; i--) { if (params.atap_ata_major & (1 << i)) { aprint_normal("%s: ATA version %d\n", drv_dev->dv_xname, i); drvp->ata_vers = i; break; } } } #endif /* An ATAPI device is at last PIO mode 3 */ if (drvp->drive_flags & DRIVE_ATAPI) drvp->PIO_mode = 3; /* * It's not in the specs, but it seems that some drive * returns 0xffff in atap_extensions when this field is invalid */ if (params.atap_extensions != 0xffff && (params.atap_extensions & WDC_EXT_MODES)) { printed = 0; /* * XXX some drives report something wrong here (they claim to * support PIO mode 8 !). As mode is coded on 3 bits in * SET FEATURE, limit it to 7 (so limit i to 4). * If higher mode than 7 is found, abort. */ for (i = 7; i >= 0; i--) { if ((params.atap_piomode_supp & (1 << i)) == 0) continue; if (i > 4) return; /* * See if mode is accepted. * If the controller can't set its PIO mode, * assume the defaults are good, so don't try * to set it */ if (atac->atac_set_modes) /* * It's OK to pool here, it's fast enouth * to not bother waiting for interrupt */ if (ata_set_mode(drvp, 0x08 | (i + 3), AT_WAIT) != CMD_OK) continue; if (!printed) { aprint_normal("%s: drive supports PIO mode %d", drv_dev->dv_xname, i + 3); sep = ","; printed = 1; } /* * If controller's driver can't set its PIO mode, * get the highter one for the drive. */ if (atac->atac_set_modes == NULL || atac->atac_pio_cap >= i + 3) { drvp->PIO_mode = i + 3; drvp->PIO_cap = i + 3; break; } } if (!printed) { /* * We didn't find a valid PIO mode. * Assume the values returned for DMA are buggy too */ return; } s = splbio(); drvp->drive_flags |= DRIVE_MODE; splx(s); printed = 0; for (i = 7; i >= 0; i--) { if ((params.atap_dmamode_supp & (1 << i)) == 0) continue; if ((atac->atac_cap & ATAC_CAP_DMA) && atac->atac_set_modes != NULL) if (ata_set_mode(drvp, 0x20 | i, AT_WAIT) != CMD_OK) continue; if (!printed) { aprint_normal("%s DMA mode %d", sep, i); sep = ","; printed = 1; } if (atac->atac_cap & ATAC_CAP_DMA) { if (atac->atac_set_modes != NULL && atac->atac_dma_cap < i) continue; drvp->DMA_mode = i; drvp->DMA_cap = i; s = splbio(); drvp->drive_flags |= DRIVE_DMA; splx(s); } break; } if (params.atap_extensions & WDC_EXT_UDMA_MODES) { printed = 0; for (i = 7; i >= 0; i--) { if ((params.atap_udmamode_supp & (1 << i)) == 0) continue; if (atac->atac_set_modes != NULL && (atac->atac_cap & ATAC_CAP_UDMA)) if (ata_set_mode(drvp, 0x40 | i, AT_WAIT) != CMD_OK) continue; if (!printed) { aprint_normal("%s Ultra-DMA mode %d", sep, i); if (i == 2) aprint_normal(" (Ultra/33)"); else if (i == 4) aprint_normal(" (Ultra/66)"); else if (i == 5) aprint_normal(" (Ultra/100)"); else if (i == 6) aprint_normal(" (Ultra/133)"); sep = ","; printed = 1; } if (atac->atac_cap & ATAC_CAP_UDMA) { if (atac->atac_set_modes != NULL && atac->atac_udma_cap < i) continue; drvp->UDMA_mode = i; drvp->UDMA_cap = i; s = splbio(); drvp->drive_flags |= DRIVE_UDMA; splx(s); } break; } } aprint_normal("\n"); } s = splbio(); drvp->drive_flags &= ~DRIVE_NOSTREAM; if (drvp->drive_flags & DRIVE_ATAPI) { if (atac->atac_cap & ATAC_CAP_ATAPI_NOSTREAM) drvp->drive_flags |= DRIVE_NOSTREAM; } else { if (atac->atac_cap & ATAC_CAP_ATA_NOSTREAM) drvp->drive_flags |= DRIVE_NOSTREAM; } splx(s); /* Try to guess ATA version here, if it didn't get reported */ if (drvp->ata_vers == 0) { if (drvp->drive_flags & DRIVE_UDMA) drvp->ata_vers = 4; /* should be at last ATA-4 */ else if (drvp->PIO_cap > 2) drvp->ata_vers = 2; /* should be at last ATA-2 */ } cf_flags = drv_dev->dv_cfdata->cf_flags; if (cf_flags & ATA_CONFIG_PIO_SET) { s = splbio(); drvp->PIO_mode = (cf_flags & ATA_CONFIG_PIO_MODES) >> ATA_CONFIG_PIO_OFF; drvp->drive_flags |= DRIVE_MODE; splx(s); } if ((atac->atac_cap & ATAC_CAP_DMA) == 0) { /* don't care about DMA modes */ return; } if (cf_flags & ATA_CONFIG_DMA_SET) { s = splbio(); if ((cf_flags & ATA_CONFIG_DMA_MODES) == ATA_CONFIG_DMA_DISABLE) { drvp->drive_flags &= ~DRIVE_DMA; } else { drvp->DMA_mode = (cf_flags & ATA_CONFIG_DMA_MODES) >> ATA_CONFIG_DMA_OFF; drvp->drive_flags |= DRIVE_DMA | DRIVE_MODE; } splx(s); } if ((atac->atac_cap & ATAC_CAP_UDMA) == 0) { /* don't care about UDMA modes */ return; } if (cf_flags & ATA_CONFIG_UDMA_SET) { s = splbio(); if ((cf_flags & ATA_CONFIG_UDMA_MODES) == ATA_CONFIG_UDMA_DISABLE) { drvp->drive_flags &= ~DRIVE_UDMA; } else { drvp->UDMA_mode = (cf_flags & ATA_CONFIG_UDMA_MODES) >> ATA_CONFIG_UDMA_OFF; drvp->drive_flags |= DRIVE_UDMA | DRIVE_MODE; } splx(s); } } /* management of the /dev/atabus* devices */ int atabusopen(dev_t dev, int flag, int fmt, struct lwp *l) { struct atabus_softc *sc; int error, unit = minor(dev); if (unit >= atabus_cd.cd_ndevs || (sc = atabus_cd.cd_devs[unit]) == NULL) return (ENXIO); if (sc->sc_flags & ATABUSCF_OPEN) return (EBUSY); if ((error = ata_addref(sc->sc_chan)) != 0) return (error); sc->sc_flags |= ATABUSCF_OPEN; return (0); } int atabusclose(dev_t dev, int flag, int fmt, struct lwp *l) { struct atabus_softc *sc = atabus_cd.cd_devs[minor(dev)]; ata_delref(sc->sc_chan); sc->sc_flags &= ~ATABUSCF_OPEN; return (0); } int atabusioctl(dev_t dev, u_long cmd, caddr_t addr, int flag, struct lwp *l) { struct atabus_softc *sc = atabus_cd.cd_devs[minor(dev)]; struct ata_channel *chp = sc->sc_chan; int min_drive, max_drive, drive; int error; int s; /* * Enforce write permission for ioctls that change the * state of the bus. Host adapter specific ioctls must * be checked by the adapter driver. */ switch (cmd) { case ATABUSIOSCAN: case ATABUSIODETACH: case ATABUSIORESET: if ((flag & FWRITE) == 0) return (EBADF); } switch (cmd) { case ATABUSIORESET: s = splbio(); ata_reset_channel(sc->sc_chan, AT_WAIT | AT_POLL); splx(s); error = 0; break; case ATABUSIOSCAN: { #if 0 struct atabusioscan_args *a= (struct atabusioscan_args *)addr; #endif if ((chp->ch_drive[0].drive_flags & DRIVE_OLD) || (chp->ch_drive[1].drive_flags & DRIVE_OLD)) return (EOPNOTSUPP); return (EOPNOTSUPP); } case ATABUSIODETACH: { struct atabusioscan_args *a= (struct atabusioscan_args *)addr; if ((chp->ch_drive[0].drive_flags & DRIVE_OLD) || (chp->ch_drive[1].drive_flags & DRIVE_OLD)) return (EOPNOTSUPP); switch (a->at_dev) { case -1: min_drive = 0; max_drive = 1; break; case 0: case 1: min_drive = max_drive = a->at_dev; break; default: return (EINVAL); } for (drive = min_drive; drive <= max_drive; drive++) { if (chp->ch_drive[drive].drv_softc != NULL) { error = config_detach( chp->ch_drive[drive].drv_softc, 0); if (error) return (error); chp->ch_drive[drive].drv_softc = NULL; } } error = 0; break; } default: error = ENOTTY; } return (error); };