/* $NetBSD: cpuregs.h,v 1.74.10.2 2010/03/11 15:02:38 yamt Exp $ */ /* * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Ralph Campbell and Rick Macklem. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)machConst.h 8.1 (Berkeley) 6/10/93 * * machConst.h -- * * Machine dependent constants. * * Copyright (C) 1989 Digital Equipment Corporation. * Permission to use, copy, modify, and distribute this software and * its documentation for any purpose and without fee is hereby granted, * provided that the above copyright notice appears in all copies. * Digital Equipment Corporation makes no representations about the * suitability of this software for any purpose. It is provided "as is" * without express or implied warranty. * * from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machConst.h, * v 9.2 89/10/21 15:55:22 jhh Exp SPRITE (DECWRL) * from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machAddrs.h, * v 1.2 89/08/15 18:28:21 rab Exp SPRITE (DECWRL) * from: Header: /sprite/src/kernel/vm/ds3100.md/RCS/vmPmaxConst.h, * v 9.1 89/09/18 17:33:00 shirriff Exp SPRITE (DECWRL) */ #ifndef _MIPS_CPUREGS_H_ #define _MIPS_CPUREGS_H_ #include /* For __CONCAT() */ #if defined(_KERNEL_OPT) #include "opt_cputype.h" #endif /* * Address space. * 32-bit mips CPUS partition their 32-bit address space into four segments: * * kuseg 0x00000000 - 0x7fffffff User virtual mem, mapped * kseg0 0x80000000 - 0x9fffffff Physical memory, cached, unmapped * kseg1 0xa0000000 - 0xbfffffff Physical memory, uncached, unmapped * kseg2 0xc0000000 - 0xffffffff kernel-virtual, mapped * * mips1 physical memory is limited to 512Mbytes, which is * doubly mapped in kseg0 (cached) and kseg1 (uncached.) * Caching of mapped addresses is controlled by bits in the TLB entry. */ #ifdef _LP64 #define MIPS_XUSEG_START (0L << 62) #define MIPS_XUSEG_P(x) (((uint64_t)(x) >> 62) == 0) #define MIPS_USEG_P(x) ((uintptr_t)(x) < 0x80000000L) #define MIPS_XSSEG_START (1L << 62) #define MIPS_XSSEG_P(x) (((uint64_t)(x) >> 62) == 1) #endif /* * MIPS addresses are signed and we defining as negative so that * in LP64 kern they get sign-extended correctly. */ #ifndef _LOCORE #define MIPS_KSEG0_START (-0x7fffffffL-1) /* 0x80000000 */ #define MIPS_KSEG1_START -0x60000000L /* 0xa0000000 */ #define MIPS_KSEG2_START -0x40000000L /* 0xc0000000 */ #define MIPS_MAX_MEM_ADDR -0x42000000L /* 0xbe000000 */ #define MIPS_RESERVED_ADDR -0x40380000L /* 0xbfc80000 */ #endif #define MIPS_PHYS_MASK 0x1fffffff #define MIPS_KSEG0_TO_PHYS(x) ((uintptr_t)(x) & MIPS_PHYS_MASK) #define MIPS_PHYS_TO_KSEG0(x) ((uintptr_t)(x) | (intptr_t)MIPS_KSEG0_START) #define MIPS_KSEG1_TO_PHYS(x) ((uintptr_t)(x) & MIPS_PHYS_MASK) #define MIPS_PHYS_TO_KSEG1(x) ((uintptr_t)(x) | (intptr_t)MIPS_KSEG1_START) #define MIPS_KSEG0_P(x) (((intptr_t)(x) & ~MIPS_PHYS_MASK) == MIPS_KSEG0_START) #define MIPS_KSEG1_P(x) (((intptr_t)(x) & ~MIPS_PHYS_MASK) == MIPS_KSEG1_START) #define MIPS_KSEG2_P(x) ((uintptr_t)MIPS_KSEG2_START <= (uintptr_t)(x)) /* Map virtual address to index in mips3 r4k virtually-indexed cache */ #define MIPS3_VA_TO_CINDEX(x) \ (((intptr_t)(x) & 0xffffff) | MIPS_KSEG0_START) #ifndef _LOCORE #define MIPS_XSEG_MASK (0x3fffffffffffffffLL) #define MIPS_XKSEG_START (0x3ULL << 62) #define MIPS_XKSEG_P(x) (((uint64_t)(x) >> 62) == 3) #define MIPS_XKPHYS_START (0x2ULL << 62) #define MIPS_PHYS_TO_XKPHYS_UNCACHED(x) \ (MIPS_XKPHYS_START | ((uint64_t)(CCA_UNCACHED) << 59) | (x)) #define MIPS_PHYS_TO_XKPHYS_CACHED(x) \ (mips3_xkphys_cached | (x)) #define MIPS_PHYS_TO_XKPHYS(cca,x) \ (MIPS_XKPHYS_START | ((uint64_t)(cca) << 59) | (x)) #define MIPS_XKPHYS_TO_PHYS(x) ((uint64_t)(x) & 0x07ffffffffffffffLL) #define MIPS_XKPHYS_TO_CCA(x) (((uint64_t)(x) >> 59) & 7) #define MIPS_XKPHYS_P(x) (((uint64_t)(x) >> 62) == 2) #endif /* _LOCORE */ #define CCA_UNCACHED 2 #define CCA_CACHEABLE 3 /* cacheable non-coherent */ /* CPU dependent mtc0 hazard hook */ #define COP0_SYNC /* nothing */ #define COP0_HAZARD_FPUENABLE nop; nop; nop; nop; /* * The bits in the cause register. * * Bits common to r3000 and r4000: * * MIPS_CR_BR_DELAY Exception happened in branch delay slot. * MIPS_CR_COP_ERR Coprocessor error. * MIPS_CR_IP Interrupt pending bits defined below. * (same meaning as in CAUSE register). * MIPS_CR_EXC_CODE The exception type (see exception codes below). * * Differences: * r3k has 4 bits of exception type, r4k has 5 bits. */ #define MIPS_CR_BR_DELAY 0x80000000 #define MIPS_CR_COP_ERR 0x30000000 #define MIPS1_CR_EXC_CODE 0x0000003C /* four bits */ #define MIPS3_CR_EXC_CODE 0x0000007C /* five bits */ #define MIPS_CR_IP 0x0000FF00 #define MIPS_CR_EXC_CODE_SHIFT 2 /* * The bits in the status register. All bits are active when set to 1. * * R3000 status register fields: * MIPS_SR_COP_USABILITY Control the usability of the four coprocessors. * MIPS_SR_TS TLB shutdown. * * MIPS_SR_INT_IE Master (current) interrupt enable bit. * * Differences: * r3k has cache control is via frobbing SR register bits, whereas the * r4k cache control is via explicit instructions. * r3k has a 3-entry stack of kernel/user bits, whereas the * r4k has kernel/supervisor/user. */ #define MIPS_SR_COP_USABILITY 0xf0000000 #define MIPS_SR_COP_0_BIT 0x10000000 #define MIPS_SR_COP_1_BIT 0x20000000 /* r4k and r3k differences, see below */ #define MIPS_SR_MX 0x01000000 /* MIPS64 */ #define MIPS_SR_PX 0x00800000 /* MIPS64 */ #define MIPS_SR_BEV 0x00400000 /* Use boot exception vector */ #define MIPS_SR_TS 0x00200000 /* r4k and r3k differences, see below */ #define MIPS_SR_INT_IE 0x00000001 /*#define MIPS_SR_MBZ 0x0f8000c0*/ /* Never used, true for r3k */ /*#define MIPS_SR_INT_MASK 0x0000ff00*/ /* * The R2000/R3000-specific status register bit definitions. * all bits are active when set to 1. * * MIPS_SR_PARITY_ERR Parity error. * MIPS_SR_CACHE_MISS Most recent D-cache load resulted in a miss. * MIPS_SR_PARITY_ZERO Zero replaces outgoing parity bits. * MIPS_SR_SWAP_CACHES Swap I-cache and D-cache. * MIPS_SR_ISOL_CACHES Isolate D-cache from main memory. * Interrupt enable bits defined below. * MIPS_SR_KU_OLD Old kernel/user mode bit. 1 => user mode. * MIPS_SR_INT_ENA_OLD Old interrupt enable bit. * MIPS_SR_KU_PREV Previous kernel/user mode bit. 1 => user mode. * MIPS_SR_INT_ENA_PREV Previous interrupt enable bit. * MIPS_SR_KU_CUR Current kernel/user mode bit. 1 => user mode. */ #define MIPS1_PARITY_ERR 0x00100000 #define MIPS1_CACHE_MISS 0x00080000 #define MIPS1_PARITY_ZERO 0x00040000 #define MIPS1_SWAP_CACHES 0x00020000 #define MIPS1_ISOL_CACHES 0x00010000 #define MIPS1_SR_KU_OLD 0x00000020 /* 2nd stacked KU/IE*/ #define MIPS1_SR_INT_ENA_OLD 0x00000010 /* 2nd stacked KU/IE*/ #define MIPS1_SR_KU_PREV 0x00000008 /* 1st stacked KU/IE*/ #define MIPS1_SR_INT_ENA_PREV 0x00000004 /* 1st stacked KU/IE*/ #define MIPS1_SR_KU_CUR 0x00000002 /* current KU */ /* backwards compatibility */ #define MIPS_SR_PARITY_ERR MIPS1_PARITY_ERR #define MIPS_SR_CACHE_MISS MIPS1_CACHE_MISS #define MIPS_SR_PARITY_ZERO MIPS1_PARITY_ZERO #define MIPS_SR_SWAP_CACHES MIPS1_SWAP_CACHES #define MIPS_SR_ISOL_CACHES MIPS1_ISOL_CACHES #define MIPS_SR_KU_OLD MIPS1_SR_KU_OLD #define MIPS_SR_INT_ENA_OLD MIPS1_SR_INT_ENA_OLD #define MIPS_SR_KU_PREV MIPS1_SR_KU_PREV #define MIPS_SR_KU_CUR MIPS1_SR_KU_CUR #define MIPS_SR_INT_ENA_PREV MIPS1_SR_INT_ENA_PREV /* * R4000 status register bit definitons, * where different from r2000/r3000. */ #define MIPS3_SR_XX 0x80000000 #define MIPS3_SR_RP 0x08000000 #define MIPS3_SR_FR 0x04000000 #define MIPS3_SR_RE 0x02000000 #define MIPS3_SR_DIAG_DL 0x01000000 /* QED 52xx */ #define MIPS3_SR_DIAG_IL 0x00800000 /* QED 52xx */ #define MIPS3_SR_PX 0x00800000 /* MIPS64 */ #define MIPS3_SR_SR 0x00100000 #define MIPS3_SR_NMI 0x00080000 /* MIPS32/64 */ #define MIPS3_SR_DIAG_CH 0x00040000 #define MIPS3_SR_DIAG_CE 0x00020000 #define MIPS3_SR_DIAG_PE 0x00010000 #define MIPS3_SR_EIE 0x00010000 /* TX79/R5900 */ #define MIPS3_SR_KX 0x00000080 #define MIPS3_SR_SX 0x00000040 #define MIPS3_SR_UX 0x00000020 #define MIPS3_SR_KSU_MASK 0x00000018 #define MIPS3_SR_KSU_USER 0x00000010 #define MIPS3_SR_KSU_SUPER 0x00000008 #define MIPS3_SR_KSU_KERNEL 0x00000000 #define MIPS3_SR_ERL 0x00000004 #define MIPS3_SR_EXL 0x00000002 #ifdef MIPS3_5900 #undef MIPS_SR_INT_IE #define MIPS_SR_INT_IE 0x00010001 /* XXX */ #endif #define MIPS_SR_SOFT_RESET MIPS3_SR_SOFT_RESET #define MIPS_SR_DIAG_CH MIPS3_SR_DIAG_CH #define MIPS_SR_DIAG_CE MIPS3_SR_DIAG_CE #define MIPS_SR_DIAG_PE MIPS3_SR_DIAG_PE #define MIPS_SR_KX MIPS3_SR_KX #define MIPS_SR_SX MIPS3_SR_SX #define MIPS_SR_UX MIPS3_SR_UX #define MIPS_SR_KSU_MASK MIPS3_SR_KSU_MASK #define MIPS_SR_KSU_USER MIPS3_SR_KSU_USER #define MIPS_SR_KSU_SUPER MIPS3_SR_KSU_SUPER #define MIPS_SR_KSU_KERNEL MIPS3_SR_KSU_KERNEL #define MIPS_SR_ERL MIPS3_SR_ERL #define MIPS_SR_EXL MIPS3_SR_EXL /* * The interrupt masks. * If a bit in the mask is 1 then the interrupt is enabled (or pending). */ #define MIPS_INT_MASK 0xff00 #define MIPS_INT_MASK_5 0x8000 #define MIPS_INT_MASK_4 0x4000 #define MIPS_INT_MASK_3 0x2000 #define MIPS_INT_MASK_2 0x1000 #define MIPS_INT_MASK_1 0x0800 #define MIPS_INT_MASK_0 0x0400 #define MIPS_HARD_INT_MASK 0xfc00 #define MIPS_SOFT_INT_MASK_1 0x0200 #define MIPS_SOFT_INT_MASK_0 0x0100 /* * mips3 CPUs have on-chip timer at INT_MASK_5. Each platform can * choose to enable this interrupt. */ #if defined(MIPS3_ENABLE_CLOCK_INTR) #define MIPS3_INT_MASK MIPS_INT_MASK #define MIPS3_HARD_INT_MASK MIPS_HARD_INT_MASK #else #define MIPS3_INT_MASK (MIPS_INT_MASK & ~MIPS_INT_MASK_5) #define MIPS3_HARD_INT_MASK (MIPS_HARD_INT_MASK & ~MIPS_INT_MASK_5) #endif /* * The bits in the context register. */ #define MIPS1_CNTXT_PTE_BASE 0xFFE00000 #define MIPS1_CNTXT_BAD_VPN 0x001FFFFC #define MIPS3_CNTXT_PTE_BASE 0xFF800000 #define MIPS3_CNTXT_BAD_VPN2 0x007FFFF0 /* * The bits in the MIPS3 config register. * * bit 0..5: R/W, Bit 6..31: R/O */ /* kseg0 coherency algorithm - see MIPS3_TLB_ATTR values */ #define MIPS3_CONFIG_K0_MASK 0x00000007 /* * R/W Update on Store Conditional * 0: Store Conditional uses coherency algorithm specified by TLB * 1: Store Conditional uses cacheable coherent update on write */ #define MIPS3_CONFIG_CU 0x00000008 #define MIPS3_CONFIG_DB 0x00000010 /* Primary D-cache line size */ #define MIPS3_CONFIG_IB 0x00000020 /* Primary I-cache line size */ #define MIPS3_CONFIG_CACHE_L1_LSIZE(config, bit) \ (((config) & (bit)) ? 32 : 16) #define MIPS3_CONFIG_DC_MASK 0x000001c0 /* Primary D-cache size */ #define MIPS3_CONFIG_DC_SHIFT 6 #define MIPS3_CONFIG_IC_MASK 0x00000e00 /* Primary I-cache size */ #define MIPS3_CONFIG_IC_SHIFT 9 #define MIPS3_CONFIG_C_DEFBASE 0x1000 /* default base 2^12 */ /* Cache size mode indication: available only on Vr41xx CPUs */ #define MIPS3_CONFIG_CS 0x00001000 #define MIPS3_CONFIG_C_4100BASE 0x0400 /* base is 2^10 if CS=1 */ #define MIPS3_CONFIG_CACHE_SIZE(config, mask, base, shift) \ ((base) << (((config) & (mask)) >> (shift))) /* External cache enable: Controls L2 for R5000/Rm527x and L3 for Rm7000 */ #define MIPS3_CONFIG_SE 0x00001000 /* Block ordering: 0: sequential, 1: sub-block */ #define MIPS3_CONFIG_EB 0x00002000 /* ECC mode - 0: ECC mode, 1: parity mode */ #define MIPS3_CONFIG_EM 0x00004000 /* BigEndianMem - 0: kernel and memory are little endian, 1: big endian */ #define MIPS3_CONFIG_BE 0x00008000 /* Dirty Shared coherency state - 0: enabled, 1: disabled */ #define MIPS3_CONFIG_SM 0x00010000 /* Secondary Cache - 0: present, 1: not present */ #define MIPS3_CONFIG_SC 0x00020000 /* System Port width - 0: 64-bit, 1: 32-bit (QED RM523x), 2,3: reserved */ #define MIPS3_CONFIG_EW_MASK 0x000c0000 #define MIPS3_CONFIG_EW_SHIFT 18 /* Secondary Cache port width - 0: 128-bit data path to S-cache, 1: reserved */ #define MIPS3_CONFIG_SW 0x00100000 /* Split Secondary Cache Mode - 0: I/D mixed, 1: I/D separated by SCAddr(17) */ #define MIPS3_CONFIG_SS 0x00200000 /* Secondary Cache line size */ #define MIPS3_CONFIG_SB_MASK 0x00c00000 #define MIPS3_CONFIG_SB_SHIFT 22 #define MIPS3_CONFIG_CACHE_L2_LSIZE(config) \ (0x10 << (((config) & MIPS3_CONFIG_SB_MASK) >> MIPS3_CONFIG_SB_SHIFT)) /* Write back data rate */ #define MIPS3_CONFIG_EP_MASK 0x0f000000 #define MIPS3_CONFIG_EP_SHIFT 24 /* System clock ratio - this value is CPU dependent */ #define MIPS3_CONFIG_EC_MASK 0x70000000 #define MIPS3_CONFIG_EC_SHIFT 28 /* Master-Checker Mode - 1: enabled */ #define MIPS3_CONFIG_CM 0x80000000 /* * The bits in the MIPS4 config register. */ /* kseg0 coherency algorithm - see MIPS3_TLB_ATTR values */ #define MIPS4_CONFIG_K0_MASK MIPS3_CONFIG_K0_MASK #define MIPS4_CONFIG_DN_MASK 0x00000018 /* Device number */ #define MIPS4_CONFIG_CT 0x00000020 /* CohPrcReqTar */ #define MIPS4_CONFIG_PE 0x00000040 /* PreElmReq */ #define MIPS4_CONFIG_PM_MASK 0x00000180 /* PreReqMax */ #define MIPS4_CONFIG_EC_MASK 0x00001e00 /* SysClkDiv */ #define MIPS4_CONFIG_SB 0x00002000 /* SCBlkSize */ #define MIPS4_CONFIG_SK 0x00004000 /* SCColEn */ #define MIPS4_CONFIG_BE 0x00008000 /* MemEnd */ #define MIPS4_CONFIG_SS_MASK 0x00070000 /* SCSize */ #define MIPS4_CONFIG_SC_MASK 0x00380000 /* SCClkDiv */ #define MIPS4_CONFIG_RESERVED 0x03c00000 /* Reserved wired 0 */ #define MIPS4_CONFIG_DC_MASK 0x1c000000 /* Primary D-Cache size */ #define MIPS4_CONFIG_IC_MASK 0xe0000000 /* Primary I-Cache size */ #define MIPS4_CONFIG_DC_SHIFT 26 #define MIPS4_CONFIG_IC_SHIFT 29 #define MIPS4_CONFIG_CACHE_SIZE(config, mask, base, shift) \ ((base) << (((config) & (mask)) >> (shift))) #define MIPS4_CONFIG_CACHE_L2_LSIZE(config) \ (((config) & MIPS4_CONFIG_SB) ? 128 : 64) /* * Location of exception vectors. * * Common vectors: reset and UTLB miss. */ #define MIPS_RESET_EXC_VEC MIPS_PHYS_TO_KSEG1(0x1FC00000) #define MIPS_UTLB_MISS_EXC_VEC MIPS_PHYS_TO_KSEG0(0) /* * MIPS-1 general exception vector (everything else) */ #define MIPS1_GEN_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0080) /* * MIPS-III exception vectors */ #define MIPS3_XTLB_MISS_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0080) #define MIPS3_CACHE_ERR_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0100) #define MIPS3_GEN_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0180) /* * TX79 (R5900) exception vectors */ #define MIPS_R5900_COUNTER_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0080) #define MIPS_R5900_DEBUG_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0100) /* * MIPS32/MIPS64 (and some MIPS3) dedicated interrupt vector. */ #define MIPS3_INTR_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0200) /* * Coprocessor 0 registers: * * v--- width for mips I,III,32,64 * (3=32bit, 6=64bit, i=impl dep) * 0 MIPS_COP_0_TLB_INDEX 3333 TLB Index. * 1 MIPS_COP_0_TLB_RANDOM 3333 TLB Random. * 2 MIPS_COP_0_TLB_LOW 3... r3k TLB entry low. * 2 MIPS_COP_0_TLB_LO0 .636 r4k TLB entry low. * 3 MIPS_COP_0_TLB_LO1 .636 r4k TLB entry low, extended. * 4 MIPS_COP_0_TLB_CONTEXT 3636 TLB Context. * 5 MIPS_COP_0_TLB_PG_MASK .333 TLB Page Mask register. * 6 MIPS_COP_0_TLB_WIRED .333 Wired TLB number. * 8 MIPS_COP_0_BAD_VADDR 3636 Bad virtual address. * 9 MIPS_COP_0_COUNT .333 Count register. * 10 MIPS_COP_0_TLB_HI 3636 TLB entry high. * 11 MIPS_COP_0_COMPARE .333 Compare (against Count). * 12 MIPS_COP_0_STATUS 3333 Status register. * 13 MIPS_COP_0_CAUSE 3333 Exception cause register. * 14 MIPS_COP_0_EXC_PC 3636 Exception PC. * 15 MIPS_COP_0_PRID 3333 Processor revision identifier. * 15/1 MIPS_COP_0_EBASE ..33 Exception Base * 16 MIPS_COP_0_CONFIG 3333 Configuration register. * 16/1 MIPS_COP_0_CONFIG1 ..33 Configuration register 1. * 16/2 MIPS_COP_0_CONFIG2 ..33 Configuration register 2. * 16/3 MIPS_COP_0_CONFIG3 ..33 Configuration register 3. * 17 MIPS_COP_0_LLADDR .336 Load Linked Address. * 18 MIPS_COP_0_WATCH_LO .336 WatchLo register. * 19 MIPS_COP_0_WATCH_HI .333 WatchHi register. * 20 MIPS_COP_0_TLB_XCONTEXT .6.6 TLB XContext register. * 23 MIPS_COP_0_DEBUG .... Debug JTAG register. * 24 MIPS_COP_0_DEPC .... DEPC JTAG register. * 25 MIPS_COP_0_PERFCNT ..36 Performance Counter register. * 26 MIPS_COP_0_ECC .3ii ECC / Error Control register. * 27 MIPS_COP_0_CACHE_ERR .3ii Cache Error register. * 28/0 MIPS_COP_0_TAG_LO .3ii Cache TagLo register (instr). * 28/1 MIPS_COP_0_DATA_LO ..ii Cache DataLo register (instr). * 28/2 MIPS_COP_0_TAG_LO ..ii Cache TagLo register (data). * 28/3 MIPS_COP_0_DATA_LO ..ii Cache DataLo register (data). * 29/0 MIPS_COP_0_TAG_HI .3ii Cache TagHi register (instr). * 29/1 MIPS_COP_0_DATA_HI ..ii Cache DataHi register (instr). * 29/2 MIPS_COP_0_TAG_HI ..ii Cache TagHi register (data). * 29/3 MIPS_COP_0_DATA_HI ..ii Cache DataHi register (data). * 30 MIPS_COP_0_ERROR_PC .636 Error EPC register. * 31 MIPS_COP_0_DESAVE .... DESAVE JTAG register. */ #ifdef _LOCORE #define _(n) __CONCAT($,n) #else #define _(n) n #endif #define MIPS_COP_0_TLB_INDEX _(0) #define MIPS_COP_0_TLB_RANDOM _(1) /* Name and meaning of TLB bits for $2 differ on r3k and r4k. */ #define MIPS_COP_0_TLB_CONTEXT _(4) /* $5 and $6 new with MIPS-III */ #define MIPS_COP_0_BAD_VADDR _(8) #define MIPS_COP_0_TLB_HI _(10) #define MIPS_COP_0_STATUS _(12) #define MIPS_COP_0_CAUSE _(13) #define MIPS_COP_0_EXC_PC _(14) #define MIPS_COP_0_PRID _(15) /* MIPS-I */ #define MIPS_COP_0_TLB_LOW _(2) /* MIPS-III */ #define MIPS_COP_0_TLB_LO0 _(2) #define MIPS_COP_0_TLB_LO1 _(3) #define MIPS_COP_0_TLB_PG_MASK _(5) #define MIPS_COP_0_TLB_WIRED _(6) #define MIPS_COP_0_COUNT _(9) #define MIPS_COP_0_COMPARE _(11) #define MIPS_COP_0_CONFIG _(16) #define MIPS_COP_0_LLADDR _(17) #define MIPS_COP_0_WATCH_LO _(18) #define MIPS_COP_0_WATCH_HI _(19) #define MIPS_COP_0_TLB_XCONTEXT _(20) #define MIPS_COP_0_ECC _(26) #define MIPS_COP_0_CACHE_ERR _(27) #define MIPS_COP_0_TAG_LO _(28) #define MIPS_COP_0_TAG_HI _(29) #define MIPS_COP_0_ERROR_PC _(30) /* MIPS32/64 */ #define MIPS_COP_0_DEBUG _(23) #define MIPS_COP_0_DEPC _(24) #define MIPS_COP_0_PERFCNT _(25) #define MIPS_COP_0_DATA_LO _(28) #define MIPS_COP_0_DATA_HI _(29) #define MIPS_COP_0_DESAVE _(31) /* * Values for the code field in a break instruction. */ #define MIPS_BREAK_INSTR 0x0000000d #define MIPS_BREAK_VAL_MASK 0x03ff0000 #define MIPS_BREAK_VAL_SHIFT 16 #define MIPS_BREAK_KDB_VAL 512 #define MIPS_BREAK_SSTEP_VAL 513 #define MIPS_BREAK_BRKPT_VAL 514 #define MIPS_BREAK_SOVER_VAL 515 #define MIPS_BREAK_KDB (MIPS_BREAK_INSTR | \ (MIPS_BREAK_KDB_VAL << MIPS_BREAK_VAL_SHIFT)) #define MIPS_BREAK_SSTEP (MIPS_BREAK_INSTR | \ (MIPS_BREAK_SSTEP_VAL << MIPS_BREAK_VAL_SHIFT)) #define MIPS_BREAK_BRKPT (MIPS_BREAK_INSTR | \ (MIPS_BREAK_BRKPT_VAL << MIPS_BREAK_VAL_SHIFT)) #define MIPS_BREAK_SOVER (MIPS_BREAK_INSTR | \ (MIPS_BREAK_SOVER_VAL << MIPS_BREAK_VAL_SHIFT)) /* * Mininum and maximum cache sizes. */ #define MIPS_MIN_CACHE_SIZE (16 * 1024) #define MIPS_MAX_CACHE_SIZE (256 * 1024) #define MIPS3_MAX_PCACHE_SIZE (32 * 1024) /* max. primary cache size */ /* * The floating point version and status registers. */ #define MIPS_FPU_ID $0 #define MIPS_FPU_CSR $31 /* * The floating point coprocessor status register bits. */ #define MIPS_FPU_ROUNDING_BITS 0x00000003 #define MIPS_FPU_ROUND_RN 0x00000000 #define MIPS_FPU_ROUND_RZ 0x00000001 #define MIPS_FPU_ROUND_RP 0x00000002 #define MIPS_FPU_ROUND_RM 0x00000003 #define MIPS_FPU_STICKY_BITS 0x0000007c #define MIPS_FPU_STICKY_INEXACT 0x00000004 #define MIPS_FPU_STICKY_UNDERFLOW 0x00000008 #define MIPS_FPU_STICKY_OVERFLOW 0x00000010 #define MIPS_FPU_STICKY_DIV0 0x00000020 #define MIPS_FPU_STICKY_INVALID 0x00000040 #define MIPS_FPU_ENABLE_BITS 0x00000f80 #define MIPS_FPU_ENABLE_INEXACT 0x00000080 #define MIPS_FPU_ENABLE_UNDERFLOW 0x00000100 #define MIPS_FPU_ENABLE_OVERFLOW 0x00000200 #define MIPS_FPU_ENABLE_DIV0 0x00000400 #define MIPS_FPU_ENABLE_INVALID 0x00000800 #define MIPS_FPU_EXCEPTION_BITS 0x0003f000 #define MIPS_FPU_EXCEPTION_INEXACT 0x00001000 #define MIPS_FPU_EXCEPTION_UNDERFLOW 0x00002000 #define MIPS_FPU_EXCEPTION_OVERFLOW 0x00004000 #define MIPS_FPU_EXCEPTION_DIV0 0x00008000 #define MIPS_FPU_EXCEPTION_INVALID 0x00010000 #define MIPS_FPU_EXCEPTION_UNIMPL 0x00020000 #define MIPS_FPU_COND_BIT 0x00800000 #define MIPS_FPU_FLUSH_BIT 0x01000000 /* r4k, MBZ on r3k */ #define MIPS1_FPC_MBZ_BITS 0xff7c0000 #define MIPS3_FPC_MBZ_BITS 0xfe7c0000 /* * Constants to determine if have a floating point instruction. */ #define MIPS_OPCODE_SHIFT 26 #define MIPS_OPCODE_C1 0x11 /* * The low part of the TLB entry. */ #define MIPS1_TLB_PFN 0xfffff000 #define MIPS1_TLB_NON_CACHEABLE_BIT 0x00000800 #define MIPS1_TLB_DIRTY_BIT 0x00000400 #define MIPS1_TLB_VALID_BIT 0x00000200 #define MIPS1_TLB_GLOBAL_BIT 0x00000100 #define MIPS3_TLB_PFN 0x3fffffc0 #define MIPS3_TLB_ATTR_MASK 0x00000038 #define MIPS3_TLB_ATTR_SHIFT 3 #define MIPS3_TLB_DIRTY_BIT 0x00000004 #define MIPS3_TLB_VALID_BIT 0x00000002 #define MIPS3_TLB_GLOBAL_BIT 0x00000001 #define MIPS1_TLB_PHYS_PAGE_SHIFT 12 #define MIPS3_TLB_PHYS_PAGE_SHIFT 6 #define MIPS1_TLB_PF_NUM MIPS1_TLB_PFN #define MIPS3_TLB_PF_NUM MIPS3_TLB_PFN #define MIPS1_TLB_MOD_BIT MIPS1_TLB_DIRTY_BIT #define MIPS3_TLB_MOD_BIT MIPS3_TLB_DIRTY_BIT /* * MIPS3_TLB_ATTR values - coherency algorithm: * 0: cacheable, noncoherent, write-through, no write allocate * 1: cacheable, noncoherent, write-through, write allocate * 2: uncached * 3: cacheable, noncoherent, write-back (noncoherent) * 4: cacheable, coherent, write-back, exclusive (exclusive) * 5: cacheable, coherent, write-back, exclusive on write (sharable) * 6: cacheable, coherent, write-back, update on write (update) * 7: uncached, accelerated (gather STORE operations) */ #define MIPS3_TLB_ATTR_WT 0 /* IDT */ #define MIPS3_TLB_ATTR_WT_WRITEALLOCATE 1 /* IDT */ #define MIPS3_TLB_ATTR_UNCACHED 2 /* R4000/R4400, IDT */ #define MIPS3_TLB_ATTR_WB_NONCOHERENT 3 /* R4000/R4400, IDT */ #define MIPS3_TLB_ATTR_WB_EXCLUSIVE 4 /* R4000/R4400 */ #define MIPS3_TLB_ATTR_WB_SHARABLE 5 /* R4000/R4400 */ #define MIPS3_TLB_ATTR_WB_UPDATE 6 /* R4000/R4400 */ #define MIPS4_TLB_ATTR_UNCACHED_ACCELERATED 7 /* R10000 */ /* * The high part of the TLB entry. */ #define MIPS1_TLB_VPN 0xfffff000 #define MIPS1_TLB_PID 0x00000fc0 #define MIPS1_TLB_PID_SHIFT 6 #define MIPS3_TLB_VPN2 0xffffe000 #define MIPS3_TLB_ASID 0x000000ff #define MIPS1_TLB_VIRT_PAGE_NUM MIPS1_TLB_VPN #define MIPS3_TLB_VIRT_PAGE_NUM MIPS3_TLB_VPN2 #define MIPS3_TLB_PID MIPS3_TLB_ASID #define MIPS_TLB_VIRT_PAGE_SHIFT 12 /* * r3000: shift count to put the index in the right spot. */ #define MIPS1_TLB_INDEX_SHIFT 8 /* * The first TLB that write random hits. */ #define MIPS1_TLB_FIRST_RAND_ENTRY 8 #define MIPS3_TLB_WIRED_UPAGES 1 /* * The number of process id entries. */ #define MIPS1_TLB_NUM_PIDS 64 #define MIPS3_TLB_NUM_ASIDS 256 /* * Patch codes to hide CPU design differences between MIPS1 and MIPS3. */ /* XXX simonb: this is before MIPS3_PLUS is defined (and is ugly!) */ #if !(defined(MIPS3) || defined(MIPS4) || defined(MIPS32) || defined(MIPS64)) \ && defined(MIPS1) /* XXX simonb must be neater! */ #define MIPS_TLB_PID_SHIFT MIPS1_TLB_PID_SHIFT #define MIPS_TLB_NUM_PIDS MIPS1_TLB_NUM_PIDS #endif #if (defined(MIPS3) || defined(MIPS4) || defined(MIPS32) || defined(MIPS64)) \ && !defined(MIPS1) /* XXX simonb must be neater! */ #define MIPS_TLB_PID_SHIFT 0 #define MIPS_TLB_NUM_PIDS MIPS3_TLB_NUM_ASIDS #endif #if !defined(MIPS_TLB_PID_SHIFT) #define MIPS_TLB_PID_SHIFT \ ((MIPS_HAS_R4K_MMU) ? 0 : MIPS1_TLB_PID_SHIFT) #define MIPS_TLB_NUM_PIDS \ ((MIPS_HAS_R4K_MMU) ? MIPS3_TLB_NUM_ASIDS : MIPS1_TLB_NUM_PIDS) #endif /* * CPU processor revision IDs for company ID == 0 (non mips32/64 chips) */ #define MIPS_R2000 0x01 /* MIPS R2000 ISA I */ #define MIPS_R3000 0x02 /* MIPS R3000 ISA I */ #define MIPS_R6000 0x03 /* MIPS R6000 ISA II */ #define MIPS_R4000 0x04 /* MIPS R4000/R4400 ISA III */ #define MIPS_R3LSI 0x05 /* LSI Logic R3000 derivative ISA I */ #define MIPS_R6000A 0x06 /* MIPS R6000A ISA II */ #define MIPS_R3IDT 0x07 /* IDT R3041 or RC36100 ISA I */ #define MIPS_R10000 0x09 /* MIPS R10000 ISA IV */ #define MIPS_R4200 0x0a /* NEC VR4200 ISA III */ #define MIPS_R4300 0x0b /* NEC VR4300 ISA III */ #define MIPS_R4100 0x0c /* NEC VR4100 ISA III */ #define MIPS_R12000 0x0e /* MIPS R12000 ISA IV */ #define MIPS_R14000 0x0f /* MIPS R14000 ISA IV */ #define MIPS_R8000 0x10 /* MIPS R8000 Blackbird/TFP ISA IV */ #define MIPS_RC32300 0x18 /* IDT RC32334,332,355 ISA 32 */ #define MIPS_R4600 0x20 /* QED R4600 Orion ISA III */ #define MIPS_R4700 0x21 /* QED R4700 Orion ISA III */ #define MIPS_R3SONY 0x21 /* Sony R3000 based ISA I */ #define MIPS_R4650 0x22 /* QED R4650 ISA III */ #define MIPS_TX3900 0x22 /* Toshiba TX39 family ISA I */ #define MIPS_R5000 0x23 /* MIPS R5000 ISA IV */ #define MIPS_R3NKK 0x23 /* NKK R3000 based ISA I */ #define MIPS_RC32364 0x26 /* IDT RC32364 ISA 32 */ #define MIPS_RM7000 0x27 /* QED RM7000 ISA IV */ #define MIPS_RM5200 0x28 /* QED RM5200s ISA IV */ #define MIPS_TX4900 0x2d /* Toshiba TX49 family ISA III */ #define MIPS_R5900 0x2e /* Toshiba R5900 (EECore) ISA --- */ #define MIPS_RC64470 0x30 /* IDT RC64474/RC64475 ISA III */ #define MIPS_TX7900 0x38 /* Toshiba TX79 ISA III+*/ #define MIPS_R5400 0x54 /* NEC VR5400 ISA IV */ #define MIPS_R5500 0x55 /* NEC VR5500 ISA IV */ #define MIPS_LOONGSON2 0x63 /* ICT Loongson-2 ISA III */ /* * CPU revision IDs for some prehistoric processors. */ /* For MIPS_R3000 */ #define MIPS_REV_R2000A 0x16 /* R2000A uses R3000 proc revision */ #define MIPS_REV_R3000 0x20 #define MIPS_REV_R3000A 0x30 /* For MIPS_TX3900 */ #define MIPS_REV_TX3912 0x10 #define MIPS_REV_TX3922 0x30 #define MIPS_REV_TX3927 0x40 /* For MIPS_R4000 */ #define MIPS_REV_R4000_A 0x00 #define MIPS_REV_R4000_B 0x22 #define MIPS_REV_R4000_C 0x30 #define MIPS_REV_R4400_A 0x40 #define MIPS_REV_R4400_B 0x50 #define MIPS_REV_R4400_C 0x60 /* For MIPS_TX4900 */ #define MIPS_REV_TX4927 0x22 /* For MIPS_LOONGSON2 */ #define MIPS_REV_LOONGSON2E 0x02 #define MIPS_REV_LOONGSON2F 0x03 /* * CPU processor revision IDs for company ID == 1 (MIPS) */ #define MIPS_4Kc 0x80 /* MIPS 4Kc ISA 32 */ #define MIPS_5Kc 0x81 /* MIPS 5Kc ISA 64 */ #define MIPS_20Kc 0x82 /* MIPS 20Kc ISA 64 */ #define MIPS_4Kmp 0x83 /* MIPS 4Km/4Kp ISA 32 */ #define MIPS_4KEc 0x84 /* MIPS 4KEc ISA 32 */ #define MIPS_4KEmp 0x85 /* MIPS 4KEm/4KEp ISA 32 */ #define MIPS_4KSc 0x86 /* MIPS 4KSc ISA 32 */ #define MIPS_M4K 0x87 /* MIPS M4K ISA 32 Rel 2 */ #define MIPS_25Kf 0x88 /* MIPS 25Kf ISA 64 */ #define MIPS_5KE 0x89 /* MIPS 5KE ISA 64 Rel 2 */ #define MIPS_4KEc_R2 0x90 /* MIPS 4KEc_R2 ISA 32 Rel 2 */ #define MIPS_4KEmp_R2 0x91 /* MIPS 4KEm/4KEp_R2 ISA 32 Rel 2 */ #define MIPS_4KSd 0x92 /* MIPS 4KSd ISA 32 Rel 2 */ #define MIPS_24K 0x93 /* MIPS 24Kc/24Kf ISA 32 Rel 2 */ #define MIPS_34K 0x95 /* MIPS 34K ISA 32 R2 MT */ #define MIPS_24KE 0x96 /* MIPS 24KEc ISA 32 Rel 2 */ #define MIPS_74K 0x97 /* MIPS 74Kc/74Kf ISA 32 Rel 2 */ /* * Alchemy (company ID 3) use the processor ID field to donote the CPU core * revision and the company options field do donate the SOC chip type. */ /* CPU processor revision IDs */ #define MIPS_AU_REV1 0x01 /* Alchemy Au1000 (Rev 1) ISA 32 */ #define MIPS_AU_REV2 0x02 /* Alchemy Au1000 (Rev 2) ISA 32 */ /* CPU company options IDs */ #define MIPS_AU1000 0x00 #define MIPS_AU1500 0x01 #define MIPS_AU1100 0x02 #define MIPS_AU1550 0x03 /* * CPU processor revision IDs for company ID == 4 (SiByte) */ #define MIPS_SB1 0x01 /* SiByte SB1 ISA 64 */ /* * CPU processor revision IDs for company ID == 5 (SandCraft) */ #define MIPS_SR7100 0x04 /* SandCraft SR7100 ISA 64 */ /* * CPU processor revision IDs for company ID == 12 (RMI) */ #define MIPS_XLR732 0x00 /* RMI XLR732-C ISA 64 */ #define MIPS_XLR716 0x02 /* RMI XLR716-C ISA 64 */ #define MIPS_XLR532 0x08 /* RMI XLR532-C ISA 64 */ #define MIPS_XLR516 0x0a /* RMI XLR516-C ISA 64 */ #define MIPS_XLR508 0x0b /* RMI XLR508-C ISA 64 */ #define MIPS_XLR308 0x0f /* RMI XLR308-C ISA 64 */ #define MIPS_XLS616 0x40 /* RMI XLS616 ISA 64 */ #define MIPS_XLS416 0x44 /* RMI XLS416 ISA 64 */ #define MIPS_XLS608 0x4A /* RMI XLS608 ISA 64 */ #define MIPS_XLS408 0x4E /* RMI XLS406 ISA 64 */ #define MIPS_XLS404 0x4F /* RMI XLS404 ISA 64 */ #define MIPS_XLS408LITE 0x88 /* RMI XLS408-Lite ISA 64 */ #define MIPS_XLS404LITE 0x8C /* RMI XLS404-Lite ISA 64 */ #define MIPS_XLS208 0x8E /* RMI XLS208 ISA 64 */ #define MIPS_XLS204 0x8F /* RMI XLS204 ISA 64 */ #define MIPS_XLS108 0xCE /* RMI XLS108 ISA 64 */ #define MIPS_XLS104 0xCF /* RMI XLS104 ISA 64 */ /* * FPU processor revision ID */ #define MIPS_SOFT 0x00 /* Software emulation ISA I */ #define MIPS_R2360 0x01 /* MIPS R2360 FPC ISA I */ #define MIPS_R2010 0x02 /* MIPS R2010 FPC ISA I */ #define MIPS_R3010 0x03 /* MIPS R3010 FPC ISA I */ #define MIPS_R6010 0x04 /* MIPS R6010 FPC ISA II */ #define MIPS_R4010 0x05 /* MIPS R4010 FPC ISA II */ #define MIPS_R31LSI 0x06 /* LSI Logic derivate ISA I */ #define MIPS_R3TOSH 0x22 /* Toshiba R3000 based FPU ISA I */ #ifdef ENABLE_MIPS_TX3900 #include #endif #ifdef MIPS3_5900 #include #endif #ifdef MIPS64_SB1 #include #endif #if defined(MIPS64_XLP) || defined(MIPS64_XLR) || defined(MIPS64_XLS) #include #endif #endif /* _MIPS_CPUREGS_H_ */