/* alpha.h -- Header file for Alpha opcode table Copyright (C) 1996-2018 Free Software Foundation, Inc. Contributed by Richard Henderson , patterned after the PPC opcode table written by Ian Lance Taylor. This file is part of GDB, GAS, and the GNU binutils. GDB, GAS, and the GNU binutils are free software; you can redistribute them and/or modify them under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GDB, GAS, and the GNU binutils are distributed in the hope that they will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this file; see the file COPYING3. If not, write to the Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef OPCODE_ALPHA_H #define OPCODE_ALPHA_H /* The opcode table is an array of struct alpha_opcode. */ struct alpha_opcode { /* The opcode name. */ const char *name; /* The opcode itself. Those bits which will be filled in with operands are zeroes. */ unsigned opcode; /* The opcode mask. This is used by the disassembler. This is a mask containing ones indicating those bits which must match the opcode field, and zeroes indicating those bits which need not match (and are presumably filled in by operands). */ unsigned mask; /* One bit flags for the opcode. These are primarily used to indicate specific processors and environments support the instructions. The defined values are listed below. */ unsigned flags; /* An array of operand codes. Each code is an index into the operand table. They appear in the order which the operands must appear in assembly code, and are terminated by a zero. */ unsigned char operands[4]; }; /* The table itself is sorted by major opcode number, and is otherwise in the order in which the disassembler should consider instructions. */ extern const struct alpha_opcode alpha_opcodes[]; extern const unsigned alpha_num_opcodes; /* Values defined for the flags field of a struct alpha_opcode. */ /* CPU Availability */ #define AXP_OPCODE_BASE 0x0001 /* Base architecture -- all cpus. */ #define AXP_OPCODE_EV4 0x0002 /* EV4 specific PALcode insns. */ #define AXP_OPCODE_EV5 0x0004 /* EV5 specific PALcode insns. */ #define AXP_OPCODE_EV6 0x0008 /* EV6 specific PALcode insns. */ #define AXP_OPCODE_BWX 0x0100 /* Byte/word extension (amask bit 0). */ #define AXP_OPCODE_CIX 0x0200 /* "Count" extension (amask bit 1). */ #define AXP_OPCODE_MAX 0x0400 /* Multimedia extension (amask bit 8). */ #define AXP_OPCODE_NOPAL (~(AXP_OPCODE_EV4|AXP_OPCODE_EV5|AXP_OPCODE_EV6)) /* A macro to extract the major opcode from an instruction. */ #define AXP_OP(i) (((i) >> 26) & 0x3F) /* The total number of major opcodes. */ #define AXP_NOPS 0x40 /* The operands table is an array of struct alpha_operand. */ struct alpha_operand { /* The number of bits in the operand. */ unsigned int bits : 5; /* How far the operand is left shifted in the instruction. */ unsigned int shift : 5; /* The default relocation type for this operand. */ signed int default_reloc : 16; /* One bit syntax flags. */ unsigned int flags : 16; /* Insertion function. This is used by the assembler. To insert an operand value into an instruction, check this field. If it is NULL, execute i |= (op & ((1 << o->bits) - 1)) << o->shift; (i is the instruction which we are filling in, o is a pointer to this structure, and op is the opcode value; this assumes twos complement arithmetic). If this field is not NULL, then simply call it with the instruction and the operand value. It will return the new value of the instruction. If the ERRMSG argument is not NULL, then if the operand value is illegal, *ERRMSG will be set to a warning string (the operand will be inserted in any case). If the operand value is legal, *ERRMSG will be unchanged (most operands can accept any value). */ unsigned (*insert) (unsigned instruction, int op, const char **errmsg); /* Extraction function. This is used by the disassembler. To extract this operand type from an instruction, check this field. If it is NULL, compute op = ((i) >> o->shift) & ((1 << o->bits) - 1); if ((o->flags & AXP_OPERAND_SIGNED) != 0 && (op & (1 << (o->bits - 1))) != 0) op -= 1 << o->bits; (i is the instruction, o is a pointer to this structure, and op is the result; this assumes twos complement arithmetic). If this field is not NULL, then simply call it with the instruction value. It will return the value of the operand. If the INVALID argument is not NULL, *INVALID will be set to non-zero if this operand type can not actually be extracted from this operand (i.e., the instruction does not match). If the operand is valid, *INVALID will not be changed. */ int (*extract) (unsigned instruction, int *invalid); }; /* Elements in the table are retrieved by indexing with values from the operands field of the alpha_opcodes table. */ extern const struct alpha_operand alpha_operands[]; extern const unsigned alpha_num_operands; /* Values defined for the flags field of a struct alpha_operand. */ /* Mask for selecting the type for typecheck purposes */ #define AXP_OPERAND_TYPECHECK_MASK \ (AXP_OPERAND_PARENS | AXP_OPERAND_COMMA | AXP_OPERAND_IR | \ AXP_OPERAND_FPR | AXP_OPERAND_RELATIVE | AXP_OPERAND_SIGNED | \ AXP_OPERAND_UNSIGNED) /* This operand does not actually exist in the assembler input. This is used to support extended mnemonics, for which two operands fields are identical. The assembler should call the insert function with any op value. The disassembler should call the extract function, ignore the return value, and check the value placed in the invalid argument. */ #define AXP_OPERAND_FAKE 01 /* The operand should be wrapped in parentheses rather than separated from the previous by a comma. This is used for the load and store instructions which want their operands to look like "Ra,disp(Rb)". */ #define AXP_OPERAND_PARENS 02 /* Used in combination with PARENS, this supresses the supression of the comma. This is used for "jmp Ra,(Rb),hint". */ #define AXP_OPERAND_COMMA 04 /* This operand names an integer register. */ #define AXP_OPERAND_IR 010 /* This operand names a floating point register. */ #define AXP_OPERAND_FPR 020 /* This operand is a relative branch displacement. The disassembler prints these symbolically if possible. */ #define AXP_OPERAND_RELATIVE 040 /* This operand takes signed values. */ #define AXP_OPERAND_SIGNED 0100 /* This operand takes unsigned values. This exists primarily so that a flags value of 0 can be treated as end-of-arguments. */ #define AXP_OPERAND_UNSIGNED 0200 /* Supress overflow detection on this field. This is used for hints. */ #define AXP_OPERAND_NOOVERFLOW 0400 /* Mask for optional argument default value. */ #define AXP_OPERAND_OPTIONAL_MASK 07000 /* This operand defaults to zero. This is used for jump hints. */ #define AXP_OPERAND_DEFAULT_ZERO 01000 /* This operand should default to the first (real) operand and is used in conjunction with AXP_OPERAND_OPTIONAL. This allows "and $0,3,$0" to be written as "and $0,3", etc. I don't like it, but it's what DEC does. */ #define AXP_OPERAND_DEFAULT_FIRST 02000 /* Similarly, this operand should default to the second (real) operand. This allows "negl $0" instead of "negl $0,$0". */ #define AXP_OPERAND_DEFAULT_SECOND 04000 /* Register common names */ #define AXP_REG_V0 0 #define AXP_REG_T0 1 #define AXP_REG_T1 2 #define AXP_REG_T2 3 #define AXP_REG_T3 4 #define AXP_REG_T4 5 #define AXP_REG_T5 6 #define AXP_REG_T6 7 #define AXP_REG_T7 8 #define AXP_REG_S0 9 #define AXP_REG_S1 10 #define AXP_REG_S2 11 #define AXP_REG_S3 12 #define AXP_REG_S4 13 #define AXP_REG_S5 14 #define AXP_REG_FP 15 #define AXP_REG_A0 16 #define AXP_REG_A1 17 #define AXP_REG_A2 18 #define AXP_REG_A3 19 #define AXP_REG_A4 20 #define AXP_REG_A5 21 #define AXP_REG_T8 22 #define AXP_REG_T9 23 #define AXP_REG_T10 24 #define AXP_REG_T11 25 #define AXP_REG_RA 26 #define AXP_REG_PV 27 #define AXP_REG_T12 27 #define AXP_REG_AT 28 #define AXP_REG_GP 29 #define AXP_REG_SP 30 #define AXP_REG_ZERO 31 #endif /* OPCODE_ALPHA_H */