File: [cvs.NetBSD.org] / src / usr.bin / make / var.c (download)
Revision 1.469, Sun Aug 23 22:49:45 2020 UTC (3 years, 7 months ago) by rillig
Branch: MAIN
Changes since 1.468: +3 -5
lines
make(1): remove redundant range restriction
re.re_nsub is at least 0, and (at least 0) + 1 cannot be 0.
|
/* $NetBSD: var.c,v 1.469 2020/08/23 22:49:45 rillig Exp $ */
/*
* Copyright (c) 1988, 1989, 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Adam de Boor.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Copyright (c) 1989 by Berkeley Softworks
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Adam de Boor.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef MAKE_NATIVE
static char rcsid[] = "$NetBSD: var.c,v 1.469 2020/08/23 22:49:45 rillig Exp $";
#else
#include <sys/cdefs.h>
#ifndef lint
#if 0
static char sccsid[] = "@(#)var.c 8.3 (Berkeley) 3/19/94";
#else
__RCSID("$NetBSD: var.c,v 1.469 2020/08/23 22:49:45 rillig Exp $");
#endif
#endif /* not lint */
#endif
/*-
* var.c --
* Variable-handling functions
*
* Interface:
* Var_Set Set the value of a variable in the given
* context. The variable is created if it doesn't
* yet exist.
*
* Var_Append Append more characters to an existing variable
* in the given context. The variable needn't
* exist already -- it will be created if it doesn't.
* A space is placed between the old value and the
* new one.
*
* Var_Exists See if a variable exists.
*
* Var_Value Return the unexpanded value of a variable in a
* context or NULL if the variable is undefined.
*
* Var_Subst Substitute either a single variable or all
* variables in a string, using the given context.
*
* Var_Parse Parse a variable expansion from a string and
* return the result and the number of characters
* consumed.
*
* Var_Delete Delete a variable in a context.
*
* Var_Init Initialize this module.
*
* Debugging:
* Var_Dump Print out all variables defined in the given
* context.
*
* XXX: There's a lot of duplication in these functions.
*/
#include <sys/stat.h>
#ifndef NO_REGEX
#include <sys/types.h>
#include <regex.h>
#endif
#include <inttypes.h>
#include <limits.h>
#include <time.h>
#include "make.h"
#include "enum.h"
#include "dir.h"
#include "job.h"
#include "metachar.h"
#define VAR_DEBUG_IF(cond, fmt, ...) \
if (!(DEBUG(VAR) && (cond))) \
(void) 0; \
else \
fprintf(debug_file, fmt, __VA_ARGS__)
#define VAR_DEBUG(fmt, ...) VAR_DEBUG_IF(TRUE, fmt, __VA_ARGS__)
ENUM_RTTI_3(VarEvalFlags,
VARE_UNDEFERR,
VARE_WANTRES,
VARE_ASSIGN);
/*
* This lets us tell if we have replaced the original environ
* (which we cannot free).
*/
char **savedEnv = NULL;
/*
* This is a harmless return value for Var_Parse that can be used by Var_Subst
* to determine if there was an error in parsing -- easier than returning
* a flag, as things outside this module don't give a hoot.
*/
char var_Error[] = "";
/*
* Similar to var_Error, but returned when the 'VARE_UNDEFERR' flag for
* Var_Parse is not set.
*
* Why not just use a constant? Well, GCC likes to condense identical string
* instances...
*/
static char varNoError[] = "";
/*
* Traditionally we consume $$ during := like any other expansion.
* Other make's do not.
* This knob allows controlling the behavior.
* FALSE to consume $$ during := assignment.
* TRUE to preserve $$ during := assignment.
*/
#define SAVE_DOLLARS ".MAKE.SAVE_DOLLARS"
static Boolean save_dollars = TRUE;
/*
* Internally, variables are contained in four different contexts.
* 1) the environment. They cannot be changed. If an environment
* variable is appended to, the result is placed in the global
* context.
* 2) the global context. Variables set in the Makefile are located in
* the global context.
* 3) the command-line context. All variables set on the command line
* are placed in this context. They are UNALTERABLE once placed here.
* 4) the local context. Each target has associated with it a context
* list. On this list are located the structures describing such
* local variables as $(@) and $(*)
* The four contexts are searched in the reverse order from which they are
* listed (but see checkEnvFirst).
*/
GNode *VAR_INTERNAL; /* variables from make itself */
GNode *VAR_GLOBAL; /* variables from the makefile */
GNode *VAR_CMD; /* variables defined on the command-line */
typedef enum {
FIND_CMD = 0x01, /* look in VAR_CMD when searching */
FIND_GLOBAL = 0x02, /* look in VAR_GLOBAL as well */
FIND_ENV = 0x04 /* look in the environment also */
} VarFindFlags;
typedef enum {
/* The variable's value is currently being used by Var_Parse or Var_Subst.
* This marker is used to avoid endless recursion. */
VAR_IN_USE = 0x01,
/* The variable comes from the environment.
* These variables are not registered in any GNode, therefore they must
* be freed as soon as they are not used anymore. */
VAR_FROM_ENV = 0x02,
/* The variable is a junk variable that should be destroyed when done with
* it. Used by Var_Parse for undefined, modified variables. */
VAR_JUNK = 0x04,
/* Variable is VAR_JUNK, but we found a use for it in some modifier and
* the value is therefore valid. */
VAR_KEEP = 0x08,
/* The variable is exported to the environment, to be used by child
* processes. */
VAR_EXPORTED = 0x10,
/* At the point where this variable was exported, it contained an
* unresolved reference to another variable. Before any child process is
* started, it needs to be exported again, in the hope that the referenced
* variable can then be resolved. */
VAR_REEXPORT = 0x20,
/* The variable came from command line. */
VAR_FROM_CMD = 0x40,
VAR_READONLY = 0x80
} VarFlags;
ENUM_RTTI_8(VarFlags,
VAR_IN_USE,
VAR_FROM_ENV,
VAR_JUNK,
VAR_KEEP,
VAR_EXPORTED,
VAR_REEXPORT,
VAR_FROM_CMD,
VAR_READONLY);
typedef struct Var {
char *name; /* the variable's name; it is allocated for
* environment variables and aliased to the
* Hash_Entry name for all other variables,
* and thus must not be modified */
Buffer val; /* its value */
VarFlags flags; /* miscellaneous status flags */
} Var;
/*
* Exporting vars is expensive so skip it if we can
*/
typedef enum {
VAR_EXPORTED_NONE,
VAR_EXPORTED_YES,
VAR_EXPORTED_ALL
} VarExportedMode;
static VarExportedMode var_exportedVars = VAR_EXPORTED_NONE;
typedef enum {
/*
* We pass this to Var_Export when doing the initial export
* or after updating an exported var.
*/
VAR_EXPORT_PARENT = 0x01,
/*
* We pass this to Var_Export1 to tell it to leave the value alone.
*/
VAR_EXPORT_LITERAL = 0x02
} VarExportFlags;
/* Flags for pattern matching in the :S and :C modifiers */
typedef enum {
VARP_SUB_GLOBAL = 0x01, /* Apply substitution globally */
VARP_SUB_ONE = 0x02, /* Apply substitution to one word */
VARP_ANCHOR_START = 0x04, /* Match at start of word */
VARP_ANCHOR_END = 0x08 /* Match at end of word */
} VarPatternFlags;
#define BROPEN '{'
#define BRCLOSE '}'
#define PROPEN '('
#define PRCLOSE ')'
/*-
*-----------------------------------------------------------------------
* VarFind --
* Find the given variable in the given context and any other contexts
* indicated.
*
* Input:
* name name to find
* ctxt context in which to find it
* flags FIND_GLOBAL look in VAR_GLOBAL as well
* FIND_CMD look in VAR_CMD as well
* FIND_ENV look in the environment as well
*
* Results:
* A pointer to the structure describing the desired variable or
* NULL if the variable does not exist.
*
* Side Effects:
* None
*-----------------------------------------------------------------------
*/
static Var *
VarFind(const char *name, GNode *ctxt, VarFindFlags flags)
{
Hash_Entry *var;
/*
* If the variable name begins with a '.', it could very well be one of
* the local ones. We check the name against all the local variables
* and substitute the short version in for 'name' if it matches one of
* them.
*/
if (*name == '.' && isupper((unsigned char)name[1])) {
switch (name[1]) {
case 'A':
if (strcmp(name, ".ALLSRC") == 0)
name = ALLSRC;
if (strcmp(name, ".ARCHIVE") == 0)
name = ARCHIVE;
break;
case 'I':
if (strcmp(name, ".IMPSRC") == 0)
name = IMPSRC;
break;
case 'M':
if (strcmp(name, ".MEMBER") == 0)
name = MEMBER;
break;
case 'O':
if (strcmp(name, ".OODATE") == 0)
name = OODATE;
break;
case 'P':
if (strcmp(name, ".PREFIX") == 0)
name = PREFIX;
break;
case 'S':
if (strcmp(name, ".SHELL") == 0 ) {
if (!shellPath)
Shell_Init();
}
break;
case 'T':
if (strcmp(name, ".TARGET") == 0)
name = TARGET;
break;
}
}
#ifdef notyet
/* for compatibility with gmake */
if (name[0] == '^' && name[1] == '\0')
name = ALLSRC;
#endif
/*
* First look for the variable in the given context. If it's not there,
* look for it in VAR_CMD, VAR_GLOBAL and the environment, in that order,
* depending on the FIND_* flags in 'flags'
*/
var = Hash_FindEntry(&ctxt->context, name);
if (var == NULL && (flags & FIND_CMD) && ctxt != VAR_CMD)
var = Hash_FindEntry(&VAR_CMD->context, name);
if (!checkEnvFirst && var == NULL && (flags & FIND_GLOBAL) &&
ctxt != VAR_GLOBAL)
{
var = Hash_FindEntry(&VAR_GLOBAL->context, name);
if (var == NULL && ctxt != VAR_INTERNAL) {
/* VAR_INTERNAL is subordinate to VAR_GLOBAL */
var = Hash_FindEntry(&VAR_INTERNAL->context, name);
}
}
if (var == NULL && (flags & FIND_ENV)) {
char *env;
if ((env = getenv(name)) != NULL) {
Var *v = bmake_malloc(sizeof(Var));
size_t len;
v->name = bmake_strdup(name);
len = strlen(env);
Buf_Init(&v->val, len + 1);
Buf_AddBytes(&v->val, env, len);
v->flags = VAR_FROM_ENV;
return v;
}
if (checkEnvFirst && (flags & FIND_GLOBAL) && ctxt != VAR_GLOBAL) {
var = Hash_FindEntry(&VAR_GLOBAL->context, name);
if (var == NULL && ctxt != VAR_INTERNAL)
var = Hash_FindEntry(&VAR_INTERNAL->context, name);
if (var == NULL)
return NULL;
else
return (Var *)Hash_GetValue(var);
}
return NULL;
}
if (var == NULL)
return NULL;
else
return (Var *)Hash_GetValue(var);
}
/*-
*-----------------------------------------------------------------------
* VarFreeEnv --
* If the variable is an environment variable, free it
*
* Input:
* v the variable
* destroy true if the value buffer should be destroyed.
*
* Results:
* TRUE if it is an environment variable, FALSE otherwise.
*-----------------------------------------------------------------------
*/
static Boolean
VarFreeEnv(Var *v, Boolean destroy)
{
if (!(v->flags & VAR_FROM_ENV))
return FALSE;
free(v->name);
Buf_Destroy(&v->val, destroy);
free(v);
return TRUE;
}
/* Add a new variable of the given name and value to the given context.
* The name and val arguments are duplicated so they may safely be freed. */
static void
VarAdd(const char *name, const char *val, GNode *ctxt, VarSet_Flags flags)
{
Var *v = bmake_malloc(sizeof(Var));
size_t len = strlen(val);
Hash_Entry *he;
Buf_Init(&v->val, len + 1);
Buf_AddBytes(&v->val, val, len);
v->flags = 0;
if (flags & VAR_SET_READONLY)
v->flags |= VAR_READONLY;
he = Hash_CreateEntry(&ctxt->context, name, NULL);
Hash_SetValue(he, v);
v->name = he->name;
VAR_DEBUG_IF(!(ctxt->flags & INTERNAL),
"%s:%s = %s\n", ctxt->name, name, val);
}
/* Remove a variable from a context, freeing the Var structure as well. */
void
Var_Delete(const char *name, GNode *ctxt)
{
char *name_freeIt = NULL;
Hash_Entry *he;
if (strchr(name, '$') != NULL)
name = name_freeIt = Var_Subst(name, VAR_GLOBAL, VARE_WANTRES);
he = Hash_FindEntry(&ctxt->context, name);
VAR_DEBUG("%s:delete %s%s\n",
ctxt->name, name, he != NULL ? "" : " (not found)");
free(name_freeIt);
if (he != NULL) {
Var *v = (Var *)Hash_GetValue(he);
if (v->flags & VAR_EXPORTED)
unsetenv(v->name);
if (strcmp(v->name, MAKE_EXPORTED) == 0)
var_exportedVars = VAR_EXPORTED_NONE;
if (v->name != he->name)
free(v->name);
Hash_DeleteEntry(&ctxt->context, he);
Buf_Destroy(&v->val, TRUE);
free(v);
}
}
/*
* Export a single variable.
* We ignore make internal variables (those which start with '.').
* Also we jump through some hoops to avoid calling setenv
* more than necessary since it can leak.
* We only manipulate flags of vars if 'parent' is set.
*/
static Boolean
Var_Export1(const char *name, VarExportFlags flags)
{
VarExportFlags parent = flags & VAR_EXPORT_PARENT;
Var *v;
char *val;
if (name[0] == '.')
return FALSE; /* skip internals */
if (name[1] == '\0') {
/*
* A single char.
* If it is one of the vars that should only appear in
* local context, skip it, else we can get Var_Subst
* into a loop.
*/
switch (name[0]) {
case '@':
case '%':
case '*':
case '!':
return FALSE;
}
}
v = VarFind(name, VAR_GLOBAL, 0);
if (v == NULL)
return FALSE;
if (!parent && (v->flags & VAR_EXPORTED) && !(v->flags & VAR_REEXPORT))
return FALSE; /* nothing to do */
val = Buf_GetAll(&v->val, NULL);
if (!(flags & VAR_EXPORT_LITERAL) && strchr(val, '$') != NULL) {
char *expr;
if (parent) {
/*
* Flag this as something we need to re-export.
* No point actually exporting it now though,
* the child can do it at the last minute.
*/
v->flags |= VAR_EXPORTED | VAR_REEXPORT;
return TRUE;
}
if (v->flags & VAR_IN_USE) {
/*
* We recursed while exporting in a child.
* This isn't going to end well, just skip it.
*/
return FALSE;
}
expr = str_concat3("${", name, "}");
val = Var_Subst(expr, VAR_GLOBAL, VARE_WANTRES);
setenv(name, val, 1);
free(val);
free(expr);
} else {
if (parent)
v->flags &= ~(unsigned)VAR_REEXPORT; /* once will do */
if (parent || !(v->flags & VAR_EXPORTED))
setenv(name, val, 1);
}
/*
* This is so Var_Set knows to call Var_Export again...
*/
if (parent) {
v->flags |= VAR_EXPORTED;
}
return TRUE;
}
static void
Var_ExportVars_callback(void *entry, void *unused MAKE_ATTR_UNUSED)
{
Var *var = entry;
Var_Export1(var->name, 0);
}
/*
* This gets called from our children.
*/
void
Var_ExportVars(void)
{
char *val;
/*
* Several make's support this sort of mechanism for tracking
* recursion - but each uses a different name.
* We allow the makefiles to update MAKELEVEL and ensure
* children see a correctly incremented value.
*/
char tmp[BUFSIZ];
snprintf(tmp, sizeof(tmp), "%d", makelevel + 1);
setenv(MAKE_LEVEL_ENV, tmp, 1);
if (var_exportedVars == VAR_EXPORTED_NONE)
return;
if (var_exportedVars == VAR_EXPORTED_ALL) {
/* Ouch! This is crazy... */
Hash_ForEach(&VAR_GLOBAL->context, Var_ExportVars_callback, NULL);
return;
}
val = Var_Subst("${" MAKE_EXPORTED ":O:u}", VAR_GLOBAL, VARE_WANTRES);
if (*val) {
char **av;
char *as;
size_t ac;
size_t i;
av = brk_string(val, FALSE, &ac, &as);
for (i = 0; i < ac; i++)
Var_Export1(av[i], 0);
free(as);
free(av);
}
free(val);
}
/*
* This is called when .export is seen or .MAKE.EXPORTED is modified.
*
* It is also called when any exported variable is modified.
* XXX: Is it really?
*
* str has the format "[-env|-literal] varname...".
*/
void
Var_Export(const char *str, Boolean isExport)
{
VarExportFlags flags;
char *val;
if (isExport && str[0] == '\0') {
var_exportedVars = VAR_EXPORTED_ALL; /* use with caution! */
return;
}
flags = 0;
if (strncmp(str, "-env", 4) == 0) {
str += 4;
} else if (strncmp(str, "-literal", 8) == 0) {
str += 8;
flags |= VAR_EXPORT_LITERAL;
} else {
flags |= VAR_EXPORT_PARENT;
}
val = Var_Subst(str, VAR_GLOBAL, VARE_WANTRES);
if (val[0] != '\0') {
char *as;
size_t ac;
char **av = brk_string(val, FALSE, &ac, &as);
size_t i;
for (i = 0; i < ac; i++) {
const char *name = av[i];
if (Var_Export1(name, flags)) {
if (var_exportedVars != VAR_EXPORTED_ALL)
var_exportedVars = VAR_EXPORTED_YES;
if (isExport && (flags & VAR_EXPORT_PARENT)) {
Var_Append(MAKE_EXPORTED, name, VAR_GLOBAL);
}
}
}
free(as);
free(av);
}
free(val);
}
extern char **environ;
/*
* This is called when .unexport[-env] is seen.
*
* str must have the form "unexport[-env] varname...".
*/
void
Var_UnExport(const char *str)
{
const char *varnames;
char *varnames_freeIt;
Boolean unexport_env;
varnames = NULL;
varnames_freeIt = NULL;
str += strlen("unexport");
unexport_env = strncmp(str, "-env", 4) == 0;
if (unexport_env) {
const char *cp;
char **newenv;
cp = getenv(MAKE_LEVEL_ENV); /* we should preserve this */
if (environ == savedEnv) {
/* we have been here before! */
newenv = bmake_realloc(environ, 2 * sizeof(char *));
} else {
if (savedEnv) {
free(savedEnv);
savedEnv = NULL;
}
newenv = bmake_malloc(2 * sizeof(char *));
}
/* Note: we cannot safely free() the original environ. */
environ = savedEnv = newenv;
newenv[0] = NULL;
newenv[1] = NULL;
if (cp && *cp)
setenv(MAKE_LEVEL_ENV, cp, 1);
} else {
for (; isspace((unsigned char)*str); str++)
continue;
if (str[0] != '\0')
varnames = str;
}
if (varnames == NULL) {
/* Using .MAKE.EXPORTED */
varnames = varnames_freeIt = Var_Subst("${" MAKE_EXPORTED ":O:u}",
VAR_GLOBAL, VARE_WANTRES);
}
if (TRUE) {
Var *v;
char **av;
char *as;
size_t ac;
size_t i;
av = brk_string(varnames, FALSE, &ac, &as);
for (i = 0; i < ac; i++) {
v = VarFind(av[i], VAR_GLOBAL, 0);
if (v == NULL) {
VAR_DEBUG("Not unexporting \"%s\" (not found)\n", av[i]);
continue;
}
VAR_DEBUG("Unexporting \"%s\"\n", av[i]);
if (!unexport_env && (v->flags & VAR_EXPORTED) &&
!(v->flags & VAR_REEXPORT))
unsetenv(v->name);
v->flags &= ~(unsigned)(VAR_EXPORTED | VAR_REEXPORT);
/*
* If we are unexporting a list,
* remove each one from .MAKE.EXPORTED.
* If we are removing them all,
* just delete .MAKE.EXPORTED below.
*/
if (varnames == str) {
char *expr = str_concat3("${" MAKE_EXPORTED ":N", v->name, "}");
char *cp = Var_Subst(expr, VAR_GLOBAL, VARE_WANTRES);
Var_Set(MAKE_EXPORTED, cp, VAR_GLOBAL);
free(cp);
free(expr);
}
}
free(as);
free(av);
if (varnames != str) {
Var_Delete(MAKE_EXPORTED, VAR_GLOBAL);
free(varnames_freeIt);
}
}
}
/* See Var_Set for documentation. */
void
Var_Set_with_flags(const char *name, const char *val, GNode *ctxt,
VarSet_Flags flags)
{
const char *unexpanded_name = name;
char *name_freeIt = NULL;
Var *v;
assert(val != NULL);
/*
* We only look for a variable in the given context since anything set
* here will override anything in a lower context, so there's not much
* point in searching them all just to save a bit of memory...
*/
if (strchr(name, '$') != NULL)
name = name_freeIt = Var_Subst(name, ctxt, VARE_WANTRES);
if (name[0] == '\0') {
VAR_DEBUG("Var_Set(\"%s\", \"%s\", ...) "
"name expands to empty string - ignored\n",
unexpanded_name, val);
free(name_freeIt);
return;
}
if (ctxt == VAR_GLOBAL) {
v = VarFind(name, VAR_CMD, 0);
if (v != NULL) {
if (v->flags & VAR_FROM_CMD) {
VAR_DEBUG("%s:%s = %s ignored!\n", ctxt->name, name, val);
goto out;
}
VarFreeEnv(v, TRUE);
}
}
v = VarFind(name, ctxt, 0);
if (v == NULL) {
if (ctxt == VAR_CMD && !(flags & VAR_NO_EXPORT)) {
/*
* This var would normally prevent the same name being added
* to VAR_GLOBAL, so delete it from there if needed.
* Otherwise -V name may show the wrong value.
*/
Var_Delete(name, VAR_GLOBAL);
}
VarAdd(name, val, ctxt, flags);
} else {
if ((v->flags & VAR_READONLY) && !(flags & VAR_SET_READONLY)) {
VAR_DEBUG("%s:%s = %s ignored (read-only)\n",
ctxt->name, name, val);
goto out;
}
Buf_Empty(&v->val);
if (val)
Buf_AddStr(&v->val, val);
VAR_DEBUG("%s:%s = %s\n", ctxt->name, name, val);
if (v->flags & VAR_EXPORTED) {
Var_Export1(name, VAR_EXPORT_PARENT);
}
}
/*
* Any variables given on the command line are automatically exported
* to the environment (as per POSIX standard)
* Other than internals.
*/
if (ctxt == VAR_CMD && !(flags & VAR_NO_EXPORT) && name[0] != '.') {
if (v == NULL) {
/* we just added it */
v = VarFind(name, ctxt, 0);
}
if (v != NULL)
v->flags |= VAR_FROM_CMD;
/*
* If requested, don't export these in the environment
* individually. We still put them in MAKEOVERRIDES so
* that the command-line settings continue to override
* Makefile settings.
*/
if (!varNoExportEnv)
setenv(name, val ? val : "", 1);
Var_Append(MAKEOVERRIDES, name, VAR_GLOBAL);
}
if (name[0] == '.' && strcmp(name, SAVE_DOLLARS) == 0)
save_dollars = s2Boolean(val, save_dollars);
out:
free(name_freeIt);
if (v != NULL)
VarFreeEnv(v, TRUE);
}
/*-
*-----------------------------------------------------------------------
* Var_Set --
* Set the variable name to the value val in the given context.
*
* Input:
* name name of variable to set
* val value to give to the variable
* ctxt context in which to set it
*
* Side Effects:
* If the variable doesn't yet exist, it is created.
* Otherwise the new value overwrites and replaces the old value.
*
* Notes:
* The variable is searched for only in its context before being
* created in that context. I.e. if the context is VAR_GLOBAL,
* only VAR_GLOBAL->context is searched. Likewise if it is VAR_CMD, only
* VAR_CMD->context is searched. This is done to avoid the literally
* thousands of unnecessary strcmp's that used to be done to
* set, say, $(@) or $(<).
* If the context is VAR_GLOBAL though, we check if the variable
* was set in VAR_CMD from the command line and skip it if so.
*-----------------------------------------------------------------------
*/
void
Var_Set(const char *name, const char *val, GNode *ctxt)
{
Var_Set_with_flags(name, val, ctxt, 0);
}
/*-
*-----------------------------------------------------------------------
* Var_Append --
* The variable of the given name has the given value appended to it in
* the given context.
*
* Input:
* name name of variable to modify
* val string to append to it
* ctxt context in which this should occur
*
* Side Effects:
* If the variable doesn't exist, it is created. Otherwise the strings
* are concatenated, with a space in between.
*
* Notes:
* Only if the variable is being sought in the global context is the
* environment searched.
* XXX: Knows its calling circumstances in that if called with ctxt
* an actual target, it will only search that context since only
* a local variable could be being appended to. This is actually
* a big win and must be tolerated.
*-----------------------------------------------------------------------
*/
void
Var_Append(const char *name, const char *val, GNode *ctxt)
{
char *name_freeIt = NULL;
Var *v;
assert(val != NULL);
if (strchr(name, '$') != NULL) {
const char *unexpanded_name = name;
name = name_freeIt = Var_Subst(name, ctxt, VARE_WANTRES);
if (name[0] == '\0') {
VAR_DEBUG("Var_Append(\"%s\", \"%s\", ...) "
"name expands to empty string - ignored\n",
unexpanded_name, val);
free(name_freeIt);
return;
}
}
v = VarFind(name, ctxt, ctxt == VAR_GLOBAL ? (FIND_CMD | FIND_ENV) : 0);
if (v == NULL) {
Var_Set(name, val, ctxt);
} else if (ctxt == VAR_CMD || !(v->flags & VAR_FROM_CMD)) {
Buf_AddByte(&v->val, ' ');
Buf_AddStr(&v->val, val);
VAR_DEBUG("%s:%s = %s\n", ctxt->name, name,
Buf_GetAll(&v->val, NULL));
if (v->flags & VAR_FROM_ENV) {
Hash_Entry *h;
/*
* If the original variable came from the environment, we
* have to install it in the global context (we could place
* it in the environment, but then we should provide a way to
* export other variables...)
*/
v->flags &= ~(unsigned)VAR_FROM_ENV;
h = Hash_CreateEntry(&ctxt->context, name, NULL);
Hash_SetValue(h, v);
}
}
free(name_freeIt);
}
/*-
*-----------------------------------------------------------------------
* Var_Exists --
* See if the given variable exists.
*
* Input:
* name Variable to find
* ctxt Context in which to start search
*
* Results:
* TRUE if it does, FALSE if it doesn't
*
* Side Effects:
* None.
*
*-----------------------------------------------------------------------
*/
Boolean
Var_Exists(const char *name, GNode *ctxt)
{
char *name_freeIt = NULL;
Var *v;
if (strchr(name, '$') != NULL)
name = name_freeIt = Var_Subst(name, ctxt, VARE_WANTRES);
v = VarFind(name, ctxt, FIND_CMD | FIND_GLOBAL | FIND_ENV);
free(name_freeIt);
if (v == NULL)
return FALSE;
(void)VarFreeEnv(v, TRUE);
return TRUE;
}
/*-
*-----------------------------------------------------------------------
* Var_Value --
* Return the unexpanded value of the given variable in the given
* context, or the usual contexts.
*
* Input:
* name name to find
* ctxt context in which to search for it
*
* Results:
* The value if the variable exists, NULL if it doesn't.
* If the returned value is not NULL, the caller must free *freeIt
* as soon as the returned value is no longer needed.
*-----------------------------------------------------------------------
*/
const char *
Var_Value(const char *name, GNode *ctxt, char **freeIt)
{
Var *v = VarFind(name, ctxt, FIND_ENV | FIND_GLOBAL | FIND_CMD);
char *p;
*freeIt = NULL;
if (v == NULL)
return NULL;
p = Buf_GetAll(&v->val, NULL);
if (VarFreeEnv(v, FALSE))
*freeIt = p;
return p;
}
/* SepBuf is a string being built from "words", interleaved with separators. */
typedef struct {
Buffer buf;
Boolean needSep;
char sep; /* usually ' ', but see the :ts modifier */
} SepBuf;
static void
SepBuf_Init(SepBuf *buf, char sep)
{
Buf_Init(&buf->buf, 32 /* bytes */);
buf->needSep = FALSE;
buf->sep = sep;
}
static void
SepBuf_Sep(SepBuf *buf)
{
buf->needSep = TRUE;
}
static void
SepBuf_AddBytes(SepBuf *buf, const char *mem, size_t mem_size)
{
if (mem_size == 0)
return;
if (buf->needSep && buf->sep != '\0') {
Buf_AddByte(&buf->buf, buf->sep);
buf->needSep = FALSE;
}
Buf_AddBytes(&buf->buf, mem, mem_size);
}
static void
SepBuf_AddBytesBetween(SepBuf *buf, const char *start, const char *end)
{
SepBuf_AddBytes(buf, start, (size_t)(end - start));
}
static void
SepBuf_AddStr(SepBuf *buf, const char *str)
{
SepBuf_AddBytes(buf, str, strlen(str));
}
static char *
SepBuf_Destroy(SepBuf *buf, Boolean free_buf)
{
return Buf_Destroy(&buf->buf, free_buf);
}
/* This callback for ModifyWords gets a single word from an expression and
* typically adds a modification of this word to the buffer. It may also do
* nothing or add several words. */
typedef void (*ModifyWordsCallback)(const char *word, SepBuf *buf, void *data);
/* Callback for ModifyWords to implement the :H modifier.
* Add the dirname of the given word to the buffer. */
static void
ModifyWord_Head(const char *word, SepBuf *buf, void *dummy MAKE_ATTR_UNUSED)
{
const char *slash = strrchr(word, '/');
if (slash != NULL)
SepBuf_AddBytesBetween(buf, word, slash);
else
SepBuf_AddStr(buf, ".");
}
/* Callback for ModifyWords to implement the :T modifier.
* Add the basename of the given word to the buffer. */
static void
ModifyWord_Tail(const char *word, SepBuf *buf, void *dummy MAKE_ATTR_UNUSED)
{
const char *slash = strrchr(word, '/');
const char *base = slash != NULL ? slash + 1 : word;
SepBuf_AddStr(buf, base);
}
/* Callback for ModifyWords to implement the :E modifier.
* Add the filename suffix of the given word to the buffer, if it exists. */
static void
ModifyWord_Suffix(const char *word, SepBuf *buf, void *dummy MAKE_ATTR_UNUSED)
{
const char *dot = strrchr(word, '.');
if (dot != NULL)
SepBuf_AddStr(buf, dot + 1);
}
/* Callback for ModifyWords to implement the :R modifier.
* Add the basename of the given word to the buffer. */
static void
ModifyWord_Root(const char *word, SepBuf *buf, void *dummy MAKE_ATTR_UNUSED)
{
const char *dot = strrchr(word, '.');
size_t len = dot != NULL ? (size_t)(dot - word) : strlen(word);
SepBuf_AddBytes(buf, word, len);
}
/* Callback for ModifyWords to implement the :M modifier.
* Place the word in the buffer if it matches the given pattern. */
static void
ModifyWord_Match(const char *word, SepBuf *buf, void *data)
{
const char *pattern = data;
VAR_DEBUG("VarMatch [%s] [%s]\n", word, pattern);
if (Str_Match(word, pattern))
SepBuf_AddStr(buf, word);
}
/* Callback for ModifyWords to implement the :N modifier.
* Place the word in the buffer if it doesn't match the given pattern. */
static void
ModifyWord_NoMatch(const char *word, SepBuf *buf, void *data)
{
const char *pattern = data;
if (!Str_Match(word, pattern))
SepBuf_AddStr(buf, word);
}
#ifdef SYSVVARSUB
/*-
*-----------------------------------------------------------------------
* Str_SYSVMatch --
* Check word against pattern for a match (% is wild),
*
* Input:
* word Word to examine
* pattern Pattern to examine against
*
* Results:
* Returns the start of the match, or NULL.
* *match_len returns the length of the match, if any.
* *hasPercent returns whether the pattern contains a percent.
*-----------------------------------------------------------------------
*/
static const char *
Str_SYSVMatch(const char *word, const char *pattern, size_t *match_len,
Boolean *hasPercent)
{
const char *p = pattern;
const char *w = word;
const char *percent;
size_t w_len;
size_t p_len;
const char *w_tail;
*hasPercent = FALSE;
if (*p == '\0') { /* ${VAR:=suffix} */
*match_len = strlen(w); /* Null pattern is the whole string */
return w;
}
percent = strchr(p, '%');
if (percent != NULL) { /* ${VAR:...%...=...} */
*hasPercent = TRUE;
if (*w == '\0')
return NULL; /* empty word does not match pattern */
/* check that the prefix matches */
for (; p != percent && *w != '\0' && *w == *p; w++, p++)
continue;
if (p != percent)
return NULL; /* No match */
p++; /* Skip the percent */
if (*p == '\0') {
/* No more pattern, return the rest of the string */
*match_len = strlen(w);
return w;
}
}
/* Test whether the tail matches */
w_len = strlen(w);
p_len = strlen(p);
if (w_len < p_len)
return NULL;
w_tail = w + w_len - p_len;
if (memcmp(p, w_tail, p_len) != 0)
return NULL;
*match_len = (size_t)(w_tail - w);
return w;
}
typedef struct {
GNode *ctx;
const char *lhs;
const char *rhs;
} ModifyWord_SYSVSubstArgs;
/* Callback for ModifyWords to implement the :%.from=%.to modifier. */
static void
ModifyWord_SYSVSubst(const char *word, SepBuf *buf, void *data)
{
const ModifyWord_SYSVSubstArgs *args = data;
char *rhs_expanded;
const char *rhs;
const char *percent;
size_t match_len;
Boolean lhsPercent;
const char *match = Str_SYSVMatch(word, args->lhs, &match_len, &lhsPercent);
if (match == NULL) {
SepBuf_AddStr(buf, word);
return;
}
/* Append rhs to the buffer, substituting the first '%' with the
* match, but only if the lhs had a '%' as well. */
rhs_expanded = Var_Subst(args->rhs, args->ctx, VARE_WANTRES);
rhs = rhs_expanded;
percent = strchr(rhs, '%');
if (percent != NULL && lhsPercent) {
/* Copy the prefix of the replacement pattern */
SepBuf_AddBytesBetween(buf, rhs, percent);
rhs = percent + 1;
}
if (percent != NULL || !lhsPercent)
SepBuf_AddBytes(buf, match, match_len);
/* Append the suffix of the replacement pattern */
SepBuf_AddStr(buf, rhs);
free(rhs_expanded);
}
#endif
typedef struct {
const char *lhs;
size_t lhsLen;
const char *rhs;
size_t rhsLen;
VarPatternFlags pflags;
Boolean matched;
} ModifyWord_SubstArgs;
/* Callback for ModifyWords to implement the :S,from,to, modifier.
* Perform a string substitution on the given word. */
static void
ModifyWord_Subst(const char *word, SepBuf *buf, void *data)
{
size_t wordLen = strlen(word);
ModifyWord_SubstArgs *args = data;
const char *match;
if ((args->pflags & VARP_SUB_ONE) && args->matched)
goto nosub;
if (args->pflags & VARP_ANCHOR_START) {
if (wordLen < args->lhsLen ||
memcmp(word, args->lhs, args->lhsLen) != 0)
goto nosub;
if (args->pflags & VARP_ANCHOR_END) {
if (wordLen != args->lhsLen)
goto nosub;
SepBuf_AddBytes(buf, args->rhs, args->rhsLen);
args->matched = TRUE;
} else {
SepBuf_AddBytes(buf, args->rhs, args->rhsLen);
SepBuf_AddBytes(buf, word + args->lhsLen, wordLen - args->lhsLen);
args->matched = TRUE;
}
return;
}
if (args->pflags & VARP_ANCHOR_END) {
const char *start;
if (wordLen < args->lhsLen)
goto nosub;
start = word + (wordLen - args->lhsLen);
if (memcmp(start, args->lhs, args->lhsLen) != 0)
goto nosub;
SepBuf_AddBytesBetween(buf, word, start);
SepBuf_AddBytes(buf, args->rhs, args->rhsLen);
args->matched = TRUE;
return;
}
/* unanchored case, may match more than once */
while ((match = Str_FindSubstring(word, args->lhs)) != NULL) {
SepBuf_AddBytesBetween(buf, word, match);
SepBuf_AddBytes(buf, args->rhs, args->rhsLen);
args->matched = TRUE;
wordLen -= (size_t)(match - word) + args->lhsLen;
word += (size_t)(match - word) + args->lhsLen;
if (wordLen == 0 || !(args->pflags & VARP_SUB_GLOBAL))
break;
}
nosub:
SepBuf_AddBytes(buf, word, wordLen);
}
#ifndef NO_REGEX
/* Print the error caused by a regcomp or regexec call. */
static void
VarREError(int reerr, regex_t *pat, const char *str)
{
size_t errlen = regerror(reerr, pat, 0, 0);
char *errbuf = bmake_malloc(errlen);
regerror(reerr, pat, errbuf, errlen);
Error("%s: %s", str, errbuf);
free(errbuf);
}
typedef struct {
regex_t re;
size_t nsub;
char *replace;
VarPatternFlags pflags;
Boolean matched;
} ModifyWord_SubstRegexArgs;
/* Callback for ModifyWords to implement the :C/from/to/ modifier.
* Perform a regex substitution on the given word. */
static void
ModifyWord_SubstRegex(const char *word, SepBuf *buf, void *data)
{
ModifyWord_SubstRegexArgs *args = data;
int xrv;
const char *wp = word;
char *rp;
int flags = 0;
regmatch_t m[10];
if ((args->pflags & VARP_SUB_ONE) && args->matched)
goto nosub;
tryagain:
xrv = regexec(&args->re, wp, args->nsub, m, flags);
switch (xrv) {
case 0:
args->matched = TRUE;
SepBuf_AddBytes(buf, wp, (size_t)m[0].rm_so);
for (rp = args->replace; *rp; rp++) {
if (*rp == '\\' && (rp[1] == '&' || rp[1] == '\\')) {
SepBuf_AddBytes(buf, rp + 1, 1);
rp++;
continue;
}
if (*rp == '&') {
SepBuf_AddBytesBetween(buf, wp + m[0].rm_so, wp + m[0].rm_eo);
continue;
}
if (*rp != '\\' || !isdigit((unsigned char)rp[1])) {
SepBuf_AddBytes(buf, rp, 1);
continue;
}
{ /* \0 to \9 backreference */
size_t n = (size_t)(rp[1] - '0');
rp++;
if (n >= args->nsub) {
Error("No subexpression \\%zu", n);
} else if (m[n].rm_so == -1 && m[n].rm_eo == -1) {
Error("No match for subexpression \\%zu", n);
} else {
SepBuf_AddBytesBetween(buf, wp + m[n].rm_so,
wp + m[n].rm_eo);
}
}
}
wp += m[0].rm_eo;
if (args->pflags & VARP_SUB_GLOBAL) {
flags |= REG_NOTBOL;
if (m[0].rm_so == 0 && m[0].rm_eo == 0) {
SepBuf_AddBytes(buf, wp, 1);
wp++;
}
if (*wp)
goto tryagain;
}
if (*wp) {
SepBuf_AddStr(buf, wp);
}
break;
default:
VarREError(xrv, &args->re, "Unexpected regex error");
/* fall through */
case REG_NOMATCH:
nosub:
SepBuf_AddStr(buf, wp);
break;
}
}
#endif
typedef struct {
GNode *ctx;
char *tvar; /* name of temporary variable */
char *str; /* string to expand */
VarEvalFlags eflags;
} ModifyWord_LoopArgs;
/* Callback for ModifyWords to implement the :@var@...@ modifier of ODE make. */
static void
ModifyWord_Loop(const char *word, SepBuf *buf, void *data)
{
const ModifyWord_LoopArgs *args;
char *s;
if (word[0] == '\0')
return;
args = data;
Var_Set_with_flags(args->tvar, word, args->ctx, VAR_NO_EXPORT);
s = Var_Subst(args->str, args->ctx, args->eflags);
VAR_DEBUG("ModifyWord_Loop: in \"%s\", replace \"%s\" with \"%s\" "
"to \"%s\"\n",
word, args->tvar, args->str, s ? s : "(null)");
if (s != NULL && s[0] != '\0') {
if (s[0] == '\n' || (buf->buf.count > 0 &&
buf->buf.buffer[buf->buf.count - 1] == '\n'))
buf->needSep = FALSE;
SepBuf_AddStr(buf, s);
}
free(s);
}
/*-
* Implements the :[first..last] modifier.
* This is a special case of ModifyWords since we want to be able
* to scan the list backwards if first > last.
*/
static char *
VarSelectWords(char sep, Boolean oneBigWord, const char *str, int first,
int last)
{
char **av; /* word list */
char *as; /* word list memory */
size_t ac;
int start, end, step;
int i;
SepBuf buf;
SepBuf_Init(&buf, sep);
if (oneBigWord) {
/* fake what brk_string() would do if there were only one word */
ac = 1;
av = bmake_malloc((ac + 1) * sizeof(char *));
as = bmake_strdup(str);
av[0] = as;
av[1] = NULL;
} else {
av = brk_string(str, FALSE, &ac, &as);
}
/*
* Now sanitize the given range.
* If first or last are negative, convert them to the positive equivalents
* (-1 gets converted to ac, -2 gets converted to (ac - 1), etc.).
*/
if (first < 0)
first += (int)ac + 1;
if (last < 0)
last += (int)ac + 1;
/*
* We avoid scanning more of the list than we need to.
*/
if (first > last) {
start = MIN((int)ac, first) - 1;
end = MAX(0, last - 1);
step = -1;
} else {
start = MAX(0, first - 1);
end = MIN((int)ac, last);
step = 1;
}
for (i = start; (step < 0) == (i >= end); i += step) {
SepBuf_AddStr(&buf, av[i]);
SepBuf_Sep(&buf);
}
free(as);
free(av);
return SepBuf_Destroy(&buf, FALSE);
}
/* Callback for ModifyWords to implement the :tA modifier.
* Replace each word with the result of realpath() if successful. */
static void
ModifyWord_Realpath(const char *word, SepBuf *buf, void *data MAKE_ATTR_UNUSED)
{
struct stat st;
char rbuf[MAXPATHLEN];
const char *rp = cached_realpath(word, rbuf);
if (rp != NULL && *rp == '/' && stat(rp, &st) == 0)
word = rp;
SepBuf_AddStr(buf, word);
}
/*-
*-----------------------------------------------------------------------
* Modify each of the words of the passed string using the given function.
*
* Input:
* str String whose words should be modified
* modifyWord Function that modifies a single word
* modifyWord_args Custom arguments for modifyWord
*
* Results:
* A string of all the words modified appropriately.
*-----------------------------------------------------------------------
*/
static char *
ModifyWords(GNode *ctx, char sep, Boolean oneBigWord, const char *str,
ModifyWordsCallback modifyWord, void *modifyWord_args)
{
SepBuf result;
char **av; /* word list */
char *as; /* word list memory */
size_t ac;
size_t i;
if (oneBigWord) {
SepBuf_Init(&result, sep);
modifyWord(str, &result, modifyWord_args);
return SepBuf_Destroy(&result, FALSE);
}
SepBuf_Init(&result, sep);
av = brk_string(str, FALSE, &ac, &as);
VAR_DEBUG("ModifyWords: split \"%s\" into %zu words\n", str, ac);
for (i = 0; i < ac; i++) {
modifyWord(av[i], &result, modifyWord_args);
if (result.buf.count > 0)
SepBuf_Sep(&result);
}
free(as);
free(av);
return SepBuf_Destroy(&result, FALSE);
}
static char *
WordList_JoinFree(char **av, size_t ac, char *as)
{
Buffer buf;
size_t i;
Buf_Init(&buf, 0);
for (i = 0; i < ac; i++) {
if (i != 0)
Buf_AddByte(&buf, ' '); /* XXX: st->sep, for consistency */
Buf_AddStr(&buf, av[i]);
}
free(av);
free(as);
return Buf_Destroy(&buf, FALSE);
}
/* Remove adjacent duplicate words. */
static char *
VarUniq(const char *str)
{
char *as; /* Word list memory */
size_t ac;
char **av = brk_string(str, FALSE, &ac, &as);
if (ac > 1) {
size_t i, j;
for (j = 0, i = 1; i < ac; i++)
if (strcmp(av[i], av[j]) != 0 && (++j != i))
av[j] = av[i];
ac = j + 1;
}
return WordList_JoinFree(av, ac, as);
}
/*-
* Parse a text part of a modifier such as the "from" and "to" in :S/from/to/
* or the :@ modifier, until the next unescaped delimiter. The delimiter, as
* well as the backslash or the dollar, can be escaped with a backslash.
*
* Return the parsed (and possibly expanded) string, or NULL if no delimiter
* was found. On successful return, the parsing position pp points right
* after the delimiter. The delimiter is not included in the returned
* value though.
*/
static char *
ParseModifierPart(
const char **pp, /* The parsing position, updated upon return */
int delim, /* Parsing stops at this delimiter */
VarEvalFlags eflags, /* Flags for evaluating nested variables;
* if VARE_WANTRES is not set, the text is
* only parsed */
GNode *ctxt, /* For looking up nested variables */
size_t *out_length, /* Optionally stores the length of the returned
* string, just to save another strlen call. */
VarPatternFlags *out_pflags,/* For the first part of the :S modifier,
* sets the VARP_ANCHOR_END flag if the last
* character of the pattern is a $. */
ModifyWord_SubstArgs *subst /* For the second part of the :S modifier,
* allow ampersands to be escaped and replace
* unescaped ampersands with subst->lhs. */
) {
Buffer buf;
const char *p;
char *rstr;
Buf_Init(&buf, 0);
/*
* Skim through until the matching delimiter is found;
* pick up variable substitutions on the way. Also allow
* backslashes to quote the delimiter, $, and \, but don't
* touch other backslashes.
*/
p = *pp;
while (*p != '\0' && *p != delim) {
const char *varstart;
Boolean is_escaped = p[0] == '\\' && (
p[1] == delim || p[1] == '\\' || p[1] == '$' ||
(p[1] == '&' && subst != NULL));
if (is_escaped) {
Buf_AddByte(&buf, p[1]);
p += 2;
continue;
}
if (*p != '$') { /* Unescaped, simple text */
if (subst != NULL && *p == '&')
Buf_AddBytes(&buf, subst->lhs, subst->lhsLen);
else
Buf_AddByte(&buf, *p);
p++;
continue;
}
if (p[1] == delim) { /* Unescaped $ at end of pattern */
if (out_pflags != NULL)
*out_pflags |= VARP_ANCHOR_END;
else
Buf_AddByte(&buf, *p);
p++;
continue;
}
if (eflags & VARE_WANTRES) { /* Nested variable, evaluated */
const char *cp2;
int len;
void *freeIt;
VarEvalFlags nested_eflags = eflags & ~(unsigned)VARE_ASSIGN;
cp2 = Var_Parse(p, ctxt, nested_eflags, &len, &freeIt);
Buf_AddStr(&buf, cp2);
free(freeIt);
p += len;
continue;
}
/* XXX: This whole block is very similar to Var_Parse without
* VARE_WANTRES. There may be subtle edge cases though that are
* not yet covered in the unit tests and that are parsed differently,
* depending on whether they are evaluated or not.
*
* This subtle difference is not documented in the manual page,
* neither is the difference between parsing :D and :M documented.
* No code should ever depend on these details, but who knows. */
varstart = p; /* Nested variable, only parsed */
if (p[1] == PROPEN || p[1] == BROPEN) {
/*
* Find the end of this variable reference
* and suck it in without further ado.
* It will be interpreted later.
*/
int have = p[1];
int want = have == PROPEN ? PRCLOSE : BRCLOSE;
int depth = 1;
for (p += 2; *p != '\0' && depth > 0; p++) {
if (p[-1] != '\\') {
if (*p == have)
depth++;
if (*p == want)
depth--;
}
}
Buf_AddBytesBetween(&buf, varstart, p);
} else {
Buf_AddByte(&buf, *varstart);
p++;
}
}
if (*p != delim) {
*pp = p;
return NULL;
}
*pp = ++p;
if (out_length != NULL)
*out_length = Buf_Size(&buf);
rstr = Buf_Destroy(&buf, FALSE);
VAR_DEBUG("Modifier part: \"%s\"\n", rstr);
return rstr;
}
/*-
*-----------------------------------------------------------------------
* VarQuote --
* Quote shell meta-characters and space characters in the string
* if quoteDollar is set, also quote and double any '$' characters.
*
* Results:
* The quoted string
*
* Side Effects:
* None.
*
*-----------------------------------------------------------------------
*/
static char *
VarQuote(char *str, Boolean quoteDollar)
{
Buffer buf;
Buf_Init(&buf, 0);
for (; *str != '\0'; str++) {
if (*str == '\n') {
const char *newline = Shell_GetNewline();
if (newline == NULL)
newline = "\\\n";
Buf_AddStr(&buf, newline);
continue;
}
if (isspace((unsigned char)*str) || ismeta((unsigned char)*str))
Buf_AddByte(&buf, '\\');
Buf_AddByte(&buf, *str);
if (quoteDollar && *str == '$')
Buf_AddStr(&buf, "\\$");
}
str = Buf_Destroy(&buf, FALSE);
VAR_DEBUG("QuoteMeta: [%s]\n", str);
return str;
}
/* Compute the 32-bit hash of the given string, using the MurmurHash3
* algorithm. Output is encoded as 8 hex digits, in Little Endian order. */
static char *
VarHash(const char *str)
{
static const char hexdigits[16] = "0123456789abcdef";
const unsigned char *ustr = (const unsigned char *)str;
uint32_t h = 0x971e137bU;
uint32_t c1 = 0x95543787U;
uint32_t c2 = 0x2ad7eb25U;
size_t len2 = strlen(str);
char *buf;
size_t i;
size_t len;
for (len = len2; len; ) {
uint32_t k = 0;
switch (len) {
default:
k = ((uint32_t)ustr[3] << 24) |
((uint32_t)ustr[2] << 16) |
((uint32_t)ustr[1] << 8) |
(uint32_t)ustr[0];
len -= 4;
ustr += 4;
break;
case 3:
k |= (uint32_t)ustr[2] << 16;
/* FALLTHROUGH */
case 2:
k |= (uint32_t)ustr[1] << 8;
/* FALLTHROUGH */
case 1:
k |= (uint32_t)ustr[0];
len = 0;
}
c1 = c1 * 5 + 0x7b7d159cU;
c2 = c2 * 5 + 0x6bce6396U;
k *= c1;
k = (k << 11) ^ (k >> 21);
k *= c2;
h = (h << 13) ^ (h >> 19);
h = h * 5 + 0x52dce729U;
h ^= k;
}
h ^= (uint32_t)len2;
h *= 0x85ebca6b;
h ^= h >> 13;
h *= 0xc2b2ae35;
h ^= h >> 16;
buf = bmake_malloc(9);
for (i = 0; i < 8; i++) {
buf[i] = hexdigits[h & 0x0f];
h >>= 4;
}
buf[8] = '\0';
return buf;
}
static char *
VarStrftime(const char *fmt, Boolean zulu, time_t tim)
{
char buf[BUFSIZ];
if (!tim)
time(&tim);
if (!*fmt)
fmt = "%c";
strftime(buf, sizeof(buf), fmt, zulu ? gmtime(&tim) : localtime(&tim));
buf[sizeof(buf) - 1] = '\0';
return bmake_strdup(buf);
}
/* The ApplyModifier functions all work in the same way. They get the
* current parsing position (pp) and parse the modifier from there. The
* modifier typically lasts until the next ':', or a closing '}' or ')'
* (taken from st->endc), or the end of the string (parse error).
*
* The high-level behavior of these functions is:
*
* 1. parse the modifier
* 2. evaluate the modifier
* 3. housekeeping
*
* Parsing the modifier
*
* If parsing succeeds, the parsing position *pp is updated to point to the
* first character following the modifier, which typically is either ':' or
* st->endc.
*
* If parsing fails because of a missing delimiter (as in the :S, :C or :@
* modifiers), set st->missing_delim and return AMR_CLEANUP.
*
* If parsing fails because the modifier is unknown, return AMR_UNKNOWN to
* try the SysV modifier ${VAR:from=to} as fallback. This should only be
* done as long as there have been no side effects from evaluating nested
* variables, to avoid evaluating them more than once. In this case, the
* parsing position must not be updated. (XXX: Why not? The original parsing
* position is well-known in ApplyModifiers.)
*
* If parsing fails and the SysV modifier ${VAR:from=to} should not be used
* as a fallback, either issue an error message using Error or Parse_Error
* and then return AMR_CLEANUP, or return AMR_BAD for the default error
* message. Both of these return values will stop processing the variable
* expression. (XXX: As of 2020-08-23, evaluation of the whole string
* continues nevertheless after skipping a few bytes, which essentially is
* undefined behavior. Not in the sense of C, but still it's impossible to
* predict what happens in the parser.)
*
* Evaluating the modifier
*
* After parsing, the modifier is evaluated. The side effects from evaluating
* nested variable expressions in the modifier text often already happen
* during parsing though.
*
* Evaluating the modifier usually takes the current value of the variable
* expression from st->val, or the variable name from st->v->name and stores
* the result in st->newVal.
*
* If evaluating fails (as of 2020-08-23), an error message is printed using
* Error. This function has no side-effects, it really just prints the error
* message. Processing the expression continues as if everything were ok.
* XXX: This should be fixed by adding proper error handling to Var_Subst,
* Var_Parse, ApplyModifiers and ModifyWords.
*
* Housekeeping
*
* Some modifiers such as :D and :U turn undefined variables into useful
* variables (VAR_JUNK, VAR_KEEP).
*
* Some modifiers need to free some memory.
*/
typedef struct {
const char startc; /* '\0' or '{' or '(' */
const char endc; /* '\0' or '}' or ')' */
Var * const v;
GNode * const ctxt;
const VarEvalFlags eflags;
char *val; /* The old value of the expression,
* before applying the modifier, never NULL */
char *newVal; /* The new value of the expression,
* after applying the modifier, never NULL */
char missing_delim; /* For error reporting */
char sep; /* Word separator in expansions
* (see the :ts modifier) */
Boolean oneBigWord; /* TRUE if some modifiers that otherwise split
* the variable value into words, like :S and
* :C, treat the variable value as a single big
* word, possibly containing spaces. */
} ApplyModifiersState;
typedef enum {
AMR_OK, /* Continue parsing */
AMR_UNKNOWN, /* Not a match, try other modifiers as well */
AMR_BAD, /* Error out with "Bad modifier" message */
AMR_CLEANUP /* Error out, with "Unfinished modifier"
* if st->missing_delim is set. */
} ApplyModifierResult;
/* Test whether mod starts with modname, followed by a delimiter. */
static Boolean
ModMatch(const char *mod, const char *modname, char endc)
{
size_t n = strlen(modname);
return strncmp(mod, modname, n) == 0 &&
(mod[n] == endc || mod[n] == ':');
}
/* Test whether mod starts with modname, followed by a delimiter or '='. */
static inline Boolean
ModMatchEq(const char *mod, const char *modname, char endc)
{
size_t n = strlen(modname);
return strncmp(mod, modname, n) == 0 &&
(mod[n] == endc || mod[n] == ':' || mod[n] == '=');
}
/* :@var@...${var}...@ */
static ApplyModifierResult
ApplyModifier_Loop(const char **pp, ApplyModifiersState *st)
{
ModifyWord_LoopArgs args;
char delim;
char prev_sep;
VarEvalFlags eflags = st->eflags & ~(unsigned)VARE_WANTRES;
args.ctx = st->ctxt;
(*pp)++; /* Skip the first '@' */
delim = '@';
args.tvar = ParseModifierPart(pp, delim, eflags,
st->ctxt, NULL, NULL, NULL);
if (args.tvar == NULL) {
st->missing_delim = delim;
return AMR_CLEANUP;
}
if (DEBUG(LINT) && strchr(args.tvar, '$') != NULL) {
Parse_Error(PARSE_FATAL,
"In the :@ modifier of \"%s\", the variable name \"%s\" "
"must not contain a dollar.",
st->v->name, args.tvar);
return AMR_CLEANUP;
}
args.str = ParseModifierPart(pp, delim, eflags,
st->ctxt, NULL, NULL, NULL);
if (args.str == NULL) {
st->missing_delim = delim;
return AMR_CLEANUP;
}
args.eflags = st->eflags & (VARE_UNDEFERR | VARE_WANTRES);
prev_sep = st->sep;
st->sep = ' '; /* XXX: should be st->sep for consistency */
st->newVal = ModifyWords(st->ctxt, st->sep, st->oneBigWord, st->val,
ModifyWord_Loop, &args);
st->sep = prev_sep;
Var_Delete(args.tvar, st->ctxt);
free(args.tvar);
free(args.str);
return AMR_OK;
}
/* :Ddefined or :Uundefined */
static ApplyModifierResult
ApplyModifier_Defined(const char **pp, ApplyModifiersState *st)
{
Buffer buf;
const char *p;
VarEvalFlags eflags = st->eflags & ~(unsigned)VARE_WANTRES;
if (st->eflags & VARE_WANTRES) {
if ((**pp == 'D') == !(st->v->flags & VAR_JUNK))
eflags |= VARE_WANTRES;
}
Buf_Init(&buf, 0);
p = *pp + 1;
while (*p != st->endc && *p != ':' && *p != '\0') {
/* Escaped delimiter or other special character */
if (*p == '\\') {
char c = p[1];
if (c == st->endc || c == ':' || c == '$' || c == '\\') {
Buf_AddByte(&buf, c);
p += 2;
continue;
}
}
/* Nested variable expression */
if (*p == '$') {
const char *cp2;
int len;
void *freeIt;
cp2 = Var_Parse(p, st->ctxt, eflags, &len, &freeIt);
Buf_AddStr(&buf, cp2);
free(freeIt);
p += len;
continue;
}
/* Ordinary text */
Buf_AddByte(&buf, *p);
p++;
}
*pp = p;
if (st->v->flags & VAR_JUNK)
st->v->flags |= VAR_KEEP;
if (eflags & VARE_WANTRES) {
st->newVal = Buf_Destroy(&buf, FALSE);
} else {
st->newVal = st->val;
Buf_Destroy(&buf, TRUE);
}
return AMR_OK;
}
/* :gmtime */
static ApplyModifierResult
ApplyModifier_Gmtime(const char **pp, ApplyModifiersState *st)
{
time_t utc;
const char *mod = *pp;
if (!ModMatchEq(mod, "gmtime", st->endc))
return AMR_UNKNOWN;
if (mod[6] == '=') {
char *ep;
utc = (time_t)strtoul(mod + 7, &ep, 10);
*pp = ep;
} else {
utc = 0;
*pp = mod + 6;
}
st->newVal = VarStrftime(st->val, TRUE, utc);
return AMR_OK;
}
/* :localtime */
static Boolean
ApplyModifier_Localtime(const char **pp, ApplyModifiersState *st)
{
time_t utc;
const char *mod = *pp;
if (!ModMatchEq(mod, "localtime", st->endc))
return AMR_UNKNOWN;
if (mod[9] == '=') {
char *ep;
utc = (time_t)strtoul(mod + 10, &ep, 10);
*pp = ep;
} else {
utc = 0;
*pp = mod + 9;
}
st->newVal = VarStrftime(st->val, FALSE, utc);
return AMR_OK;
}
/* :hash */
static ApplyModifierResult
ApplyModifier_Hash(const char **pp, ApplyModifiersState *st)
{
if (!ModMatch(*pp, "hash", st->endc))
return AMR_UNKNOWN;
st->newVal = VarHash(st->val);
*pp += 4;
return AMR_OK;
}
/* :P */
static ApplyModifierResult
ApplyModifier_Path(const char **pp, ApplyModifiersState *st)
{
GNode *gn;
char *path;
if (st->v->flags & VAR_JUNK)
st->v->flags |= VAR_KEEP;
gn = Targ_FindNode(st->v->name, TARG_NOCREATE);
if (gn == NULL || gn->type & OP_NOPATH) {
path = NULL;
} else if (gn->path) {
path = bmake_strdup(gn->path);
} else {
Lst searchPath = Suff_FindPath(gn);
path = Dir_FindFile(st->v->name, searchPath);
}
if (path == NULL)
path = bmake_strdup(st->v->name);
st->newVal = path;
(*pp)++;
return AMR_OK;
}
/* :!cmd! */
static ApplyModifierResult
ApplyModifier_Exclam(const char **pp, ApplyModifiersState *st)
{
char delim;
char *cmd;
const char *errfmt;
(*pp)++;
delim = '!';
cmd = ParseModifierPart(pp, delim, st->eflags, st->ctxt,
NULL, NULL, NULL);
if (cmd == NULL) {
st->missing_delim = delim;
return AMR_CLEANUP;
}
errfmt = NULL;
if (st->eflags & VARE_WANTRES)
st->newVal = Cmd_Exec(cmd, &errfmt);
else
st->newVal = varNoError;
free(cmd);
if (errfmt != NULL)
Error(errfmt, st->val); /* XXX: why still return AMR_OK? */
if (st->v->flags & VAR_JUNK)
st->v->flags |= VAR_KEEP;
return AMR_OK;
}
/* The :range modifier generates an integer sequence as long as the words.
* The :range=7 modifier generates an integer sequence from 1 to 7. */
static ApplyModifierResult
ApplyModifier_Range(const char **pp, ApplyModifiersState *st)
{
size_t n;
Buffer buf;
size_t i;
const char *mod = *pp;
if (!ModMatchEq(mod, "range", st->endc))
return AMR_UNKNOWN;
if (mod[5] == '=') {
char *ep;
n = (size_t)strtoul(mod + 6, &ep, 10);
*pp = ep;
} else {
n = 0;
*pp = mod + 5;
}
if (n == 0) {
char *as;
char **av = brk_string(st->val, FALSE, &n, &as);
free(as);
free(av);
}
Buf_Init(&buf, 0);
for (i = 0; i < n; i++) {
if (i != 0)
Buf_AddByte(&buf, ' '); /* XXX: st->sep, for consistency */
Buf_AddInt(&buf, 1 + (int)i);
}
st->newVal = Buf_Destroy(&buf, FALSE);
return AMR_OK;
}
/* :Mpattern or :Npattern */
static ApplyModifierResult
ApplyModifier_Match(const char **pp, ApplyModifiersState *st)
{
const char *mod = *pp;
Boolean copy = FALSE; /* pattern should be, or has been, copied */
Boolean needSubst = FALSE;
const char *endpat;
char *pattern;
ModifyWordsCallback callback;
/*
* In the loop below, ignore ':' unless we are at (or back to) the
* original brace level.
* XXX This will likely not work right if $() and ${} are intermixed.
*/
int nest = 0;
const char *p;
for (p = mod + 1; *p != '\0' && !(*p == ':' && nest == 0); p++) {
if (*p == '\\' &&
(p[1] == ':' || p[1] == st->endc || p[1] == st->startc)) {
if (!needSubst)
copy = TRUE;
p++;
continue;
}
if (*p == '$')
needSubst = TRUE;
if (*p == '(' || *p == '{')
nest++;
if (*p == ')' || *p == '}') {
nest--;
if (nest < 0)
break;
}
}
*pp = p;
endpat = p;
if (copy) {
char *dst;
const char *src;
/* Compress the \:'s out of the pattern. */
pattern = bmake_malloc((size_t)(endpat - (mod + 1)) + 1);
dst = pattern;
src = mod + 1;
for (; src < endpat; src++, dst++) {
if (src[0] == '\\' && src + 1 < endpat &&
/* XXX: st->startc is missing here; see above */
(src[1] == ':' || src[1] == st->endc))
src++;
*dst = *src;
}
*dst = '\0';
endpat = dst;
} else {
/*
* Either Var_Subst or ModifyWords will need a
* nul-terminated string soon, so construct one now.
*/
pattern = bmake_strldup(mod + 1, (size_t)(endpat - (mod + 1)));
}
if (needSubst) {
/* pattern contains embedded '$', so use Var_Subst to expand it. */
char *old_pattern = pattern;
pattern = Var_Subst(pattern, st->ctxt, st->eflags);
free(old_pattern);
}
VAR_DEBUG("Pattern[%s] for [%s] is [%s]\n", st->v->name, st->val, pattern);
callback = mod[0] == 'M' ? ModifyWord_Match : ModifyWord_NoMatch;
st->newVal = ModifyWords(st->ctxt, st->sep, st->oneBigWord, st->val,
callback, pattern);
free(pattern);
return AMR_OK;
}
/* :S,from,to, */
static ApplyModifierResult
ApplyModifier_Subst(const char **pp, ApplyModifiersState *st)
{
ModifyWord_SubstArgs args;
char *lhs, *rhs;
Boolean oneBigWord;
char delim = (*pp)[1];
if (delim == '\0') {
Error("Missing delimiter for :S modifier");
(*pp)++;
return AMR_CLEANUP;
}
*pp += 2;
args.pflags = 0;
args.matched = FALSE;
/*
* If pattern begins with '^', it is anchored to the
* start of the word -- skip over it and flag pattern.
*/
if (**pp == '^') {
args.pflags |= VARP_ANCHOR_START;
(*pp)++;
}
lhs = ParseModifierPart(pp, delim, st->eflags, st->ctxt,
&args.lhsLen, &args.pflags, NULL);
if (lhs == NULL) {
st->missing_delim = delim;
return AMR_CLEANUP;
}
args.lhs = lhs;
rhs = ParseModifierPart(pp, delim, st->eflags, st->ctxt,
&args.rhsLen, NULL, &args);
if (rhs == NULL) {
st->missing_delim = delim;
return AMR_CLEANUP;
}
args.rhs = rhs;
oneBigWord = st->oneBigWord;
for (;; (*pp)++) {
switch (**pp) {
case 'g':
args.pflags |= VARP_SUB_GLOBAL;
continue;
case '1':
args.pflags |= VARP_SUB_ONE;
continue;
case 'W':
oneBigWord = TRUE;
continue;
}
break;
}
st->newVal = ModifyWords(st->ctxt, st->sep, oneBigWord, st->val,
ModifyWord_Subst, &args);
free(lhs);
free(rhs);
return AMR_OK;
}
#ifndef NO_REGEX
/* :C,from,to, */
static ApplyModifierResult
ApplyModifier_Regex(const char **pp, ApplyModifiersState *st)
{
char *re;
ModifyWord_SubstRegexArgs args;
Boolean oneBigWord;
int error;
char delim = (*pp)[1];
if (delim == '\0') {
Error("Missing delimiter for :C modifier");
(*pp)++;
return AMR_CLEANUP;
}
*pp += 2;
re = ParseModifierPart(pp, delim, st->eflags, st->ctxt, NULL, NULL, NULL);
if (re == NULL) {
st->missing_delim = delim;
return AMR_CLEANUP;
}
args.replace = ParseModifierPart(pp, delim, st->eflags, st->ctxt,
NULL, NULL, NULL);
if (args.replace == NULL) {
free(re);
st->missing_delim = delim;
return AMR_CLEANUP;
}
args.pflags = 0;
args.matched = FALSE;
oneBigWord = st->oneBigWord;
for (;; (*pp)++) {
switch (**pp) {
case 'g':
args.pflags |= VARP_SUB_GLOBAL;
continue;
case '1':
args.pflags |= VARP_SUB_ONE;
continue;
case 'W':
oneBigWord = TRUE;
continue;
}
break;
}
error = regcomp(&args.re, re, REG_EXTENDED);
free(re);
if (error) {
VarREError(error, &args.re, "Regex compilation error");
free(args.replace);
return AMR_CLEANUP;
}
args.nsub = args.re.re_nsub + 1;
if (args.nsub > 10)
args.nsub = 10;
st->newVal = ModifyWords(st->ctxt, st->sep, oneBigWord, st->val,
ModifyWord_SubstRegex, &args);
regfree(&args.re);
free(args.replace);
return AMR_OK;
}
#endif
static void
ModifyWord_Copy(const char *word, SepBuf *buf, void *data MAKE_ATTR_UNUSED)
{
SepBuf_AddStr(buf, word);
}
/* :ts<separator> */
static ApplyModifierResult
ApplyModifier_ToSep(const char **pp, ApplyModifiersState *st)
{
/* XXX: pp points to the 's', for historic reasons only.
* Changing this will influence the error messages. */
const char *sep = *pp + 1;
/* ":ts<any><endc>" or ":ts<any>:" */
if (sep[0] != st->endc && (sep[1] == st->endc || sep[1] == ':')) {
st->sep = sep[0];
*pp = sep + 1;
goto ok;
}
/* ":ts<endc>" or ":ts:" */
if (sep[0] == st->endc || sep[0] == ':') {
st->sep = '\0'; /* no separator */
*pp = sep;
goto ok;
}
/* ":ts<unrecognised><unrecognised>". */
if (sep[0] != '\\')
return AMR_BAD;
/* ":ts\n" */
if (sep[1] == 'n') {
st->sep = '\n';
*pp = sep + 2;
goto ok;
}
/* ":ts\t" */
if (sep[1] == 't') {
st->sep = '\t';
*pp = sep + 2;
goto ok;
}
/* ":ts\x40" or ":ts\100" */
{
const char *numStart = sep + 1;
int base = 8; /* assume octal */
char *end;
if (sep[1] == 'x') {
base = 16;
numStart++;
} else if (!isdigit((unsigned char)sep[1]))
return AMR_BAD; /* ":ts<backslash><unrecognised>". */
st->sep = (char)strtoul(numStart, &end, base);
if (*end != ':' && *end != st->endc)
return AMR_BAD;
*pp = end;
}
ok:
st->newVal = ModifyWords(st->ctxt, st->sep, st->oneBigWord, st->val,
ModifyWord_Copy, NULL);
return AMR_OK;
}
/* :tA, :tu, :tl, :ts<separator>, etc. */
static ApplyModifierResult
ApplyModifier_To(const char **pp, ApplyModifiersState *st)
{
const char *mod = *pp;
assert(mod[0] == 't');
*pp = mod + 1; /* make sure it is set */
if (mod[1] == st->endc || mod[1] == ':' || mod[1] == '\0')
return AMR_BAD; /* Found ":t<endc>" or ":t:". */
if (mod[1] == 's')
return ApplyModifier_ToSep(pp, st);
if (mod[2] != st->endc && mod[2] != ':')
return AMR_BAD; /* Found ":t<unrecognised><unrecognised>". */
/* Check for two-character options: ":tu", ":tl" */
if (mod[1] == 'A') { /* absolute path */
st->newVal = ModifyWords(st->ctxt, st->sep, st->oneBigWord, st->val,
ModifyWord_Realpath, NULL);
*pp = mod + 2;
} else if (mod[1] == 'u') {
size_t i;
size_t len = strlen(st->val);
st->newVal = bmake_malloc(len + 1);
for (i = 0; i < len + 1; i++)
st->newVal[i] = (char)toupper((unsigned char)st->val[i]);
*pp = mod + 2;
} else if (mod[1] == 'l') {
size_t i;
size_t len = strlen(st->val);
st->newVal = bmake_malloc(len + 1);
for (i = 0; i < len + 1; i++)
st->newVal[i] = (char)tolower((unsigned char)st->val[i]);
*pp = mod + 2;
} else if (mod[1] == 'W' || mod[1] == 'w') {
st->oneBigWord = mod[1] == 'W';
st->newVal = st->val;
*pp = mod + 2;
} else {
/* Found ":t<unrecognised>:" or ":t<unrecognised><endc>". */
return AMR_BAD;
}
return AMR_OK;
}
/* :[#], :[1], etc. */
static ApplyModifierResult
ApplyModifier_Words(const char **pp, ApplyModifiersState *st)
{
char delim;
char *estr;
char *ep;
int first, last;
(*pp)++; /* skip the '[' */
delim = ']'; /* look for closing ']' */
estr = ParseModifierPart(pp, delim, st->eflags, st->ctxt,
NULL, NULL, NULL);
if (estr == NULL) {
st->missing_delim = delim;
return AMR_CLEANUP;
}
/* now *pp points just after the closing ']' */
if (**pp != ':' && **pp != st->endc)
goto bad_modifier; /* Found junk after ']' */
if (estr[0] == '\0')
goto bad_modifier; /* empty square brackets in ":[]". */
if (estr[0] == '#' && estr[1] == '\0') { /* Found ":[#]" */
if (st->oneBigWord) {
st->newVal = bmake_strdup("1");
} else {
Buffer buf;
/* XXX: brk_string() is a rather expensive
* way of counting words. */
char *as;
size_t ac;
char **av = brk_string(st->val, FALSE, &ac, &as);
free(as);
free(av);
Buf_Init(&buf, 4); /* 3 digits + '\0' */
Buf_AddInt(&buf, (int)ac);
st->newVal = Buf_Destroy(&buf, FALSE);
}
goto ok;
}
if (estr[0] == '*' && estr[1] == '\0') {
/* Found ":[*]" */
st->oneBigWord = TRUE;
st->newVal = st->val;
goto ok;
}
if (estr[0] == '@' && estr[1] == '\0') {
/* Found ":[@]" */
st->oneBigWord = FALSE;
st->newVal = st->val;
goto ok;
}
/*
* We expect estr to contain a single integer for :[N], or two integers
* separated by ".." for :[start..end].
*/
first = (int)strtol(estr, &ep, 0);
if (ep == estr) /* Found junk instead of a number */
goto bad_modifier;
if (ep[0] == '\0') { /* Found only one integer in :[N] */
last = first;
} else if (ep[0] == '.' && ep[1] == '.' && ep[2] != '\0') {
/* Expecting another integer after ".." */
ep += 2;
last = (int)strtol(ep, &ep, 0);
if (ep[0] != '\0') /* Found junk after ".." */
goto bad_modifier;
} else
goto bad_modifier; /* Found junk instead of ".." */
/*
* Now seldata is properly filled in, but we still have to check for 0 as
* a special case.
*/
if (first == 0 && last == 0) {
/* ":[0]" or perhaps ":[0..0]" */
st->oneBigWord = TRUE;
st->newVal = st->val;
goto ok;
}
/* ":[0..N]" or ":[N..0]" */
if (first == 0 || last == 0)
goto bad_modifier;
/* Normal case: select the words described by seldata. */
st->newVal = VarSelectWords(st->sep, st->oneBigWord, st->val, first, last);
ok:
free(estr);
return AMR_OK;
bad_modifier:
free(estr);
return AMR_BAD;
}
static int
str_cmp_asc(const void *a, const void *b)
{
return strcmp(*(const char * const *)a, *(const char * const *)b);
}
static int
str_cmp_desc(const void *a, const void *b)
{
return strcmp(*(const char * const *)b, *(const char * const *)a);
}
/* :O (order ascending) or :Or (order descending) or :Ox (shuffle) */
static ApplyModifierResult
ApplyModifier_Order(const char **pp, ApplyModifiersState *st)
{
const char *mod = (*pp)++; /* skip past the 'O' in any case */
char *as; /* word list memory */
size_t ac;
char **av = brk_string(st->val, FALSE, &ac, &as);
if (mod[1] == st->endc || mod[1] == ':') {
/* :O sorts ascending */
qsort(av, ac, sizeof(char *), str_cmp_asc);
} else if ((mod[1] == 'r' || mod[1] == 'x') &&
(mod[2] == st->endc || mod[2] == ':')) {
(*pp)++;
if (mod[1] == 'r') {
/* :Or sorts descending */
qsort(av, ac, sizeof(char *), str_cmp_desc);
} else {
/* :Ox shuffles
*
* We will use [ac..2] range for mod factors. This will produce
* random numbers in [(ac-1)..0] interval, and minimal
* reasonable value for mod factor is 2 (the mod 1 will produce
* 0 with probability 1).
*/
size_t i;
for (i = ac - 1; i > 0; i--) {
size_t rndidx = (size_t)random() % (i + 1);
char *t = av[i];
av[i] = av[rndidx];
av[rndidx] = t;
}
}
} else {
free(as);
free(av);
return AMR_BAD;
}
st->newVal = WordList_JoinFree(av, ac, as);
return AMR_OK;
}
/* :? then : else */
static ApplyModifierResult
ApplyModifier_IfElse(const char **pp, ApplyModifiersState *st)
{
char delim;
char *then_expr, *else_expr;
Boolean value = FALSE;
VarEvalFlags then_eflags = st->eflags & ~(unsigned)VARE_WANTRES;
VarEvalFlags else_eflags = st->eflags & ~(unsigned)VARE_WANTRES;
int cond_rc = COND_PARSE; /* anything other than COND_INVALID */
if (st->eflags & VARE_WANTRES) {
cond_rc = Cond_EvalExpression(NULL, st->v->name, &value, 0, FALSE);
if (cond_rc != COND_INVALID && value)
then_eflags |= VARE_WANTRES;
if (cond_rc != COND_INVALID && !value)
else_eflags |= VARE_WANTRES;
}
(*pp)++; /* skip past the '?' */
delim = ':';
then_expr = ParseModifierPart(pp, delim, then_eflags, st->ctxt,
NULL, NULL, NULL);
if (then_expr == NULL) {
st->missing_delim = delim;
return AMR_CLEANUP;
}
delim = st->endc; /* BRCLOSE or PRCLOSE */
else_expr = ParseModifierPart(pp, delim, else_eflags, st->ctxt,
NULL, NULL, NULL);
if (else_expr == NULL) {
st->missing_delim = delim;
return AMR_CLEANUP;
}
(*pp)--;
if (cond_rc == COND_INVALID) {
Error("Bad conditional expression `%s' in %s?%s:%s",
st->v->name, st->v->name, then_expr, else_expr);
return AMR_CLEANUP;
}
if (value) {
st->newVal = then_expr;
free(else_expr);
} else {
st->newVal = else_expr;
free(then_expr);
}
if (st->v->flags & VAR_JUNK)
st->v->flags |= VAR_KEEP;
return AMR_OK;
}
/*
* The ::= modifiers actually assign a value to the variable.
* Their main purpose is in supporting modifiers of .for loop
* iterators and other obscure uses. They always expand to
* nothing. In a target rule that would otherwise expand to an
* empty line they can be preceded with @: to keep make happy.
* Eg.
*
* foo: .USE
* .for i in ${.TARGET} ${.TARGET:R}.gz
* @: ${t::=$i}
* @echo blah ${t:T}
* .endfor
*
* ::=<str> Assigns <str> as the new value of variable.
* ::?=<str> Assigns <str> as value of variable if
* it was not already set.
* ::+=<str> Appends <str> to variable.
* ::!=<cmd> Assigns output of <cmd> as the new value of
* variable.
*/
static ApplyModifierResult
ApplyModifier_Assign(const char **pp, ApplyModifiersState *st)
{
GNode *v_ctxt;
char *sv_name;
char delim;
char *val;
const char *mod = *pp;
const char *op = mod + 1;
if (!(op[0] == '=' ||
(op[1] == '=' &&
(op[0] == '!' || op[0] == '+' || op[0] == '?'))))
return AMR_UNKNOWN; /* "::<unrecognised>" */
if (st->v->name[0] == 0) {
*pp = mod + 1;
return AMR_BAD;
}
v_ctxt = st->ctxt; /* context where v belongs */
sv_name = NULL;
if (st->v->flags & VAR_JUNK) {
/*
* We need to bmake_strdup() it in case ParseModifierPart() recurses.
*/
sv_name = st->v->name;
st->v->name = bmake_strdup(st->v->name);
} else if (st->ctxt != VAR_GLOBAL) {
Var *gv = VarFind(st->v->name, st->ctxt, 0);
if (gv == NULL)
v_ctxt = VAR_GLOBAL;
else
VarFreeEnv(gv, TRUE);
}
switch (op[0]) {
case '+':
case '?':
case '!':
*pp = mod + 3;
break;
default:
*pp = mod + 2;
break;
}
delim = st->startc == PROPEN ? PRCLOSE : BRCLOSE;
val = ParseModifierPart(pp, delim, st->eflags, st->ctxt, NULL, NULL, NULL);
if (st->v->flags & VAR_JUNK) {
/* restore original name */
free(st->v->name);
st->v->name = sv_name;
}
if (val == NULL) {
st->missing_delim = delim;
return AMR_CLEANUP;
}
(*pp)--;
if (st->eflags & VARE_WANTRES) {
switch (op[0]) {
case '+':
Var_Append(st->v->name, val, v_ctxt);
break;
case '!': {
const char *errfmt;
char *cmd_output = Cmd_Exec(val, &errfmt);
if (errfmt)
Error(errfmt, st->val);
else
Var_Set(st->v->name, cmd_output, v_ctxt);
free(cmd_output);
break;
}
case '?':
if (!(st->v->flags & VAR_JUNK))
break;
/* FALLTHROUGH */
default:
Var_Set(st->v->name, val, v_ctxt);
break;
}
}
free(val);
st->newVal = varNoError; /* XXX: varNoError is kind of an error,
* the intention here is to just return
* an empty string. */
return AMR_OK;
}
/* remember current value */
static ApplyModifierResult
ApplyModifier_Remember(const char **pp, ApplyModifiersState *st)
{
const char *mod = *pp;
if (!ModMatchEq(mod, "_", st->endc))
return AMR_UNKNOWN;
if (mod[1] == '=') {
size_t n = strcspn(mod + 2, ":)}");
char *name = bmake_strldup(mod + 2, n);
Var_Set(name, st->val, st->ctxt);
free(name);
*pp = mod + 2 + n;
} else {
Var_Set("_", st->val, st->ctxt);
*pp = mod + 1;
}
st->newVal = st->val;
return AMR_OK;
}
/* Apply the given function to each word of the variable value. */
static ApplyModifierResult
ApplyModifier_WordFunc(const char **pp, ApplyModifiersState *st,
ModifyWordsCallback modifyWord)
{
char delim = (*pp)[1];
if (delim != st->endc && delim != ':')
return AMR_UNKNOWN;
st->newVal = ModifyWords(st->ctxt, st->sep, st->oneBigWord,
st->val, modifyWord, NULL);
(*pp)++;
return AMR_OK;
}
#ifdef SYSVVARSUB
/* :from=to */
static ApplyModifierResult
ApplyModifier_SysV(const char **pp, ApplyModifiersState *st)
{
char delim;
char *lhs, *rhs;
const char *mod = *pp;
Boolean eqFound = FALSE;
/*
* First we make a pass through the string trying
* to verify it is a SYSV-make-style translation:
* it must be: <string1>=<string2>)
*/
int nest = 1;
const char *next = mod;
while (*next != '\0' && nest > 0) {
if (*next == '=') {
eqFound = TRUE;
/* continue looking for st->endc */
} else if (*next == st->endc)
nest--;
else if (*next == st->startc)
nest++;
if (nest > 0)
next++;
}
if (*next != st->endc || !eqFound)
return AMR_UNKNOWN;
delim = '=';
*pp = mod;
lhs = ParseModifierPart(pp, delim, st->eflags, st->ctxt, NULL, NULL, NULL);
if (lhs == NULL) {
st->missing_delim = delim;
return AMR_CLEANUP;
}
delim = st->endc;
rhs = ParseModifierPart(pp, delim, st->eflags, st->ctxt, NULL, NULL, NULL);
if (rhs == NULL) {
st->missing_delim = delim;
return AMR_CLEANUP;
}
/*
* SYSV modifications happen through the whole
* string. Note the pattern is anchored at the end.
*/
(*pp)--;
if (lhs[0] == '\0' && *st->val == '\0') {
st->newVal = st->val; /* special case */
} else {
ModifyWord_SYSVSubstArgs args = {st->ctxt, lhs, rhs};
st->newVal = ModifyWords(st->ctxt, st->sep, st->oneBigWord, st->val,
ModifyWord_SYSVSubst, &args);
}
free(lhs);
free(rhs);
return AMR_OK;
}
#endif
/* Apply any modifiers (such as :Mpattern or :@var@loop@ or :Q or ::=value). */
static char *
ApplyModifiers(
const char **pp, /* the parsing position, updated upon return */
char *val, /* the current value of the variable */
char const startc, /* '(' or '{', or '\0' for indirect modifiers */
char const endc, /* ')' or '}', or '\0' for indirect modifiers */
Var * const v, /* the variable may have its flags changed */
GNode * const ctxt, /* for looking up and modifying variables */
VarEvalFlags const eflags,
void ** const freePtr /* free this after using the return value */
) {
ApplyModifiersState st = {
startc, endc, v, ctxt, eflags, val,
var_Error, /* .newVal */
'\0', /* .missing_delim */
' ', /* .sep */
FALSE /* .oneBigWord */
};
const char *p;
const char *mod;
ApplyModifierResult res;
assert(startc == '(' || startc == '{' || startc == '\0');
assert(endc == ')' || endc == '}' || endc == '\0');
assert(val != NULL);
p = *pp;
while (*p != '\0' && *p != endc) {
if (*p == '$') {
/*
* We may have some complex modifiers in a variable.
*/
int rlen;
void *freeIt;
const char *rval = Var_Parse(p, st.ctxt, st.eflags, &rlen, &freeIt);
/*
* If we have not parsed up to st.endc or ':',
* we are not interested.
*/
int c;
assert(rval != NULL);
if (rval[0] != '\0' &&
(c = p[rlen]) != '\0' && c != ':' && c != st.endc) {
free(freeIt);
goto apply_mods;
}
VAR_DEBUG("Indirect modifier \"%s\" from \"%.*s\"\n",
rval, rlen, p);
p += rlen;
if (rval[0] != '\0') {
const char *rval_pp = rval;
st.val = ApplyModifiers(&rval_pp, st.val, '\0', '\0', v,
ctxt, eflags, freePtr);
if (st.val == var_Error
|| (st.val == varNoError && !(st.eflags & VARE_UNDEFERR))
|| *rval_pp != '\0') {
free(freeIt);
goto out; /* error already reported */
}
}
free(freeIt);
if (*p == ':')
p++;
else if (*p == '\0' && endc != '\0') {
Error("Unclosed variable specification after complex "
"modifier (expecting '%c') for %s", st.endc, st.v->name);
goto out;
}
continue;
}
apply_mods:
st.newVal = var_Error; /* default value, in case of errors */
res = AMR_BAD; /* just a safe fallback */
mod = p;
if (DEBUG(VAR)) {
char eflags_str[VarEvalFlags_ToStringSize];
char vflags_str[VarFlags_ToStringSize];
Boolean is_single_char = mod[0] != '\0' &&
(mod[1] == endc || mod[1] == ':');
/* At this point, only the first character of the modifier can
* be used since the end of the modifier is not yet known. */
VAR_DEBUG("Applying ${%s:%c%s} to \"%s\" "
"(eflags = %s, vflags = %s)\n",
st.v->name, mod[0], is_single_char ? "" : "...", st.val,
Enum_ToString(eflags_str, sizeof eflags_str, st.eflags,
VarEvalFlags_ToStringSpecs),
Enum_ToString(vflags_str, sizeof vflags_str, st.v->flags,
VarFlags_ToStringSpecs));
}
switch (*mod) {
case ':':
res = ApplyModifier_Assign(&p, &st);
break;
case '@':
res = ApplyModifier_Loop(&p, &st);
break;
case '_':
res = ApplyModifier_Remember(&p, &st);
break;
case 'D':
case 'U':
res = ApplyModifier_Defined(&p, &st);
break;
case 'L':
if (st.v->flags & VAR_JUNK)
st.v->flags |= VAR_KEEP;
st.newVal = bmake_strdup(st.v->name);
p++;
res = AMR_OK;
break;
case 'P':
res = ApplyModifier_Path(&p, &st);
break;
case '!':
res = ApplyModifier_Exclam(&p, &st);
break;
case '[':
res = ApplyModifier_Words(&p, &st);
break;
case 'g':
res = ApplyModifier_Gmtime(&p, &st);
break;
case 'h':
res = ApplyModifier_Hash(&p, &st);
break;
case 'l':
res = ApplyModifier_Localtime(&p, &st);
break;
case 't':
res = ApplyModifier_To(&p, &st);
break;
case 'N':
case 'M':
res = ApplyModifier_Match(&p, &st);
break;
case 'S':
res = ApplyModifier_Subst(&p, &st);
break;
case '?':
res = ApplyModifier_IfElse(&p, &st);
break;
#ifndef NO_REGEX
case 'C':
res = ApplyModifier_Regex(&p, &st);
break;
#endif
case 'q':
case 'Q':
if (p[1] == st.endc || p[1] == ':') {
st.newVal = VarQuote(st.val, *mod == 'q');
p++;
res = AMR_OK;
} else
res = AMR_UNKNOWN;
break;
case 'T':
res = ApplyModifier_WordFunc(&p, &st, ModifyWord_Tail);
break;
case 'H':
res = ApplyModifier_WordFunc(&p, &st, ModifyWord_Head);
break;
case 'E':
res = ApplyModifier_WordFunc(&p, &st, ModifyWord_Suffix);
break;
case 'R':
res = ApplyModifier_WordFunc(&p, &st, ModifyWord_Root);
break;
case 'r':
res = ApplyModifier_Range(&p, &st);
break;
case 'O':
res = ApplyModifier_Order(&p, &st);
break;
case 'u':
if (p[1] == st.endc || p[1] == ':') {
st.newVal = VarUniq(st.val);
p++;
res = AMR_OK;
} else
res = AMR_UNKNOWN;
break;
#ifdef SUNSHCMD
case 's':
if (p[1] == 'h' && (p[2] == st.endc || p[2] == ':')) {
if (st.eflags & VARE_WANTRES) {
const char *errfmt;
st.newVal = Cmd_Exec(st.val, &errfmt);
if (errfmt)
Error(errfmt, st.val);
} else
st.newVal = varNoError;
p += 2;
res = AMR_OK;
} else
res = AMR_UNKNOWN;
break;
#endif
default:
res = AMR_UNKNOWN;
}
#ifdef SYSVVARSUB
if (res == AMR_UNKNOWN) {
assert(p == mod);
res = ApplyModifier_SysV(&p, &st);
}
#endif
if (res == AMR_UNKNOWN) {
Error("Unknown modifier '%c'", *mod);
for (p++; *p != ':' && *p != st.endc && *p != '\0'; p++)
continue;
st.newVal = var_Error;
}
if (res == AMR_CLEANUP)
goto cleanup;
if (res == AMR_BAD)
goto bad_modifier;
if (DEBUG(VAR)) {
char eflags_str[VarEvalFlags_ToStringSize];
char vflags_str[VarFlags_ToStringSize];
const char *quot = st.newVal == var_Error ? "" : "\"";
const char *newVal = st.newVal == var_Error ? "error" : st.newVal;
VAR_DEBUG("Result of ${%s:%.*s} is %s%s%s "
"(eflags = %s, vflags = %s)\n",
st.v->name, (int)(p - mod), mod, quot, newVal, quot,
Enum_ToString(eflags_str, sizeof eflags_str, st.eflags,
VarEvalFlags_ToStringSpecs),
Enum_ToString(vflags_str, sizeof vflags_str, st.v->flags,
VarFlags_ToStringSpecs));
}
if (st.newVal != st.val) {
if (*freePtr) {
free(st.val);
*freePtr = NULL;
}
st.val = st.newVal;
if (st.val != var_Error && st.val != varNoError) {
*freePtr = st.val;
}
}
if (*p == '\0' && st.endc != '\0') {
Error("Unclosed variable specification (expecting '%c') "
"for \"%s\" (value \"%s\") modifier %c",
st.endc, st.v->name, st.val, *mod);
} else if (*p == ':') {
p++;
}
mod = p;
}
out:
*pp = p;
assert(st.val != NULL); /* Use var_Error or varNoError instead. */
return st.val;
bad_modifier:
Error("Bad modifier `:%.*s' for %s",
(int)strcspn(mod, ":)}"), mod, st.v->name);
cleanup:
*pp = p;
if (st.missing_delim != '\0')
Error("Unfinished modifier for %s ('%c' missing)",
st.v->name, st.missing_delim);
free(*freePtr);
*freePtr = NULL;
return var_Error;
}
static Boolean
VarIsDynamic(GNode *ctxt, const char *varname, size_t namelen)
{
if ((namelen == 1 ||
(namelen == 2 && (varname[1] == 'F' || varname[1] == 'D'))) &&
(ctxt == VAR_CMD || ctxt == VAR_GLOBAL))
{
/*
* If substituting a local variable in a non-local context,
* assume it's for dynamic source stuff. We have to handle
* this specially and return the longhand for the variable
* with the dollar sign escaped so it makes it back to the
* caller. Only four of the local variables are treated
* specially as they are the only four that will be set
* when dynamic sources are expanded.
*/
switch (varname[0]) {
case '@':
case '%':
case '*':
case '!':
return TRUE;
}
return FALSE;
}
if ((namelen == 7 || namelen == 8) && varname[0] == '.' &&
isupper((unsigned char)varname[1]) &&
(ctxt == VAR_CMD || ctxt == VAR_GLOBAL))
{
return strcmp(varname, ".TARGET") == 0 ||
strcmp(varname, ".ARCHIVE") == 0 ||
strcmp(varname, ".PREFIX") == 0 ||
strcmp(varname, ".MEMBER") == 0;
}
return FALSE;
}
/*-
*-----------------------------------------------------------------------
* Var_Parse --
* Given the start of a variable invocation (such as $v, $(VAR),
* ${VAR:Mpattern}), extract the variable name, possibly some
* modifiers and find its value by applying the modifiers to the
* original value.
*
* Input:
* str The string to parse
* ctxt The context for the variable
* flags VARE_UNDEFERR if undefineds are an error
* VARE_WANTRES if we actually want the result
* VARE_ASSIGN if we are in a := assignment
* lengthPtr OUT: The length of the specification
* freePtr OUT: Non-NULL if caller should free *freePtr
*
* Results:
* Returns the value of the variable expression.
* var_Error if there was a parse error and VARE_UNDEFERR was set.
* varNoError if there was a parse error and VARE_UNDEFERR was not set.
*
* Parsing should continue at str + *lengthPtr.
*
* After using the returned value, *freePtr must be freed, preferably
* using bmake_free since it is NULL in most cases.
*
* Side Effects:
* Any effects from the modifiers, such as :!cmd! or ::=value.
*-----------------------------------------------------------------------
*/
/* coverity[+alloc : arg-*4] */
const char *
Var_Parse(const char * const str, GNode *ctxt, VarEvalFlags eflags,
int *lengthPtr, void **freePtr)
{
const char *tstr; /* Pointer into str */
Boolean haveModifier; /* TRUE if have modifiers for the variable */
char startc; /* Starting character if variable in parens
* or braces */
char endc; /* Ending character if variable in parens
* or braces */
Boolean dynamic; /* TRUE if the variable is local and we're
* expanding it in a non-local context. This
* is done to support dynamic sources. The
* result is just the invocation, unaltered */
const char *extramodifiers;
Var *v;
char *nstr;
char eflags_str[VarEvalFlags_ToStringSize];
VAR_DEBUG("%s: %s with %s\n", __func__, str,
Enum_ToString(eflags_str, sizeof eflags_str, eflags,
VarEvalFlags_ToStringSpecs));
*freePtr = NULL;
extramodifiers = NULL; /* extra modifiers to apply first */
dynamic = FALSE;
startc = str[1];
if (startc != PROPEN && startc != BROPEN) {
char name[2];
/*
* If it's not bounded by braces of some sort, life is much simpler.
* We just need to check for the first character and return the
* value if it exists.
*/
/* Error out some really stupid names */
if (startc == '\0' || strchr(")}:$", startc)) {
*lengthPtr = 1;
return var_Error;
}
name[0] = startc;
name[1] = '\0';
v = VarFind(name, ctxt, FIND_ENV | FIND_GLOBAL | FIND_CMD);
if (v == NULL) {
*lengthPtr = 2;
if (ctxt == VAR_CMD || ctxt == VAR_GLOBAL) {
/*
* If substituting a local variable in a non-local context,
* assume it's for dynamic source stuff. We have to handle
* this specially and return the longhand for the variable
* with the dollar sign escaped so it makes it back to the
* caller. Only four of the local variables are treated
* specially as they are the only four that will be set
* when dynamic sources are expanded.
*/
switch (str[1]) {
case '@':
return "$(.TARGET)";
case '%':
return "$(.MEMBER)";
case '*':
return "$(.PREFIX)";
case '!':
return "$(.ARCHIVE)";
}
}
return (eflags & VARE_UNDEFERR) ? var_Error : varNoError;
} else {
haveModifier = FALSE;
tstr = str + 1;
}
} else {
Buffer namebuf; /* Holds the variable name */
int depth;
size_t namelen;
char *varname;
endc = startc == PROPEN ? PRCLOSE : BRCLOSE;
Buf_Init(&namebuf, 0);
/*
* Skip to the end character or a colon, whichever comes first.
*/
depth = 1;
for (tstr = str + 2; *tstr != '\0'; tstr++) {
/* Track depth so we can spot parse errors. */
if (*tstr == startc)
depth++;
if (*tstr == endc) {
if (--depth == 0)
break;
}
if (*tstr == ':' && depth == 1)
break;
/* A variable inside a variable, expand. */
if (*tstr == '$') {
int rlen;
void *freeIt;
const char *rval = Var_Parse(tstr, ctxt, eflags, &rlen,
&freeIt);
if (rval != NULL)
Buf_AddStr(&namebuf, rval);
free(freeIt);
tstr += rlen - 1;
} else
Buf_AddByte(&namebuf, *tstr);
}
if (*tstr == ':') {
haveModifier = TRUE;
} else if (*tstr == endc) {
haveModifier = FALSE;
} else {
Parse_Error(PARSE_FATAL, "Unclosed variable \"%s\"",
Buf_GetAll(&namebuf, NULL));
/*
* If we never did find the end character, return NULL
* right now, setting the length to be the distance to
* the end of the string, since that's what make does.
*/
*lengthPtr = (int)(size_t)(tstr - str);
Buf_Destroy(&namebuf, TRUE);
return var_Error;
}
varname = Buf_GetAll(&namebuf, &namelen);
/*
* At this point, varname points into newly allocated memory from
* namebuf, containing only the name of the variable.
*
* start and tstr point into the const string that was pointed
* to by the original value of the str parameter. start points
* to the '$' at the beginning of the string, while tstr points
* to the char just after the end of the variable name -- this
* will be '\0', ':', PRCLOSE, or BRCLOSE.
*/
v = VarFind(varname, ctxt, FIND_ENV | FIND_GLOBAL | FIND_CMD);
/*
* Check also for bogus D and F forms of local variables since we're
* in a local context and the name is the right length.
*/
if (v == NULL && ctxt != VAR_CMD && ctxt != VAR_GLOBAL &&
namelen == 2 && (varname[1] == 'F' || varname[1] == 'D') &&
strchr("@%?*!<>", varname[0]) != NULL)
{
/*
* Well, it's local -- go look for it.
*/
char name[] = { varname[0], '\0' };
v = VarFind(name, ctxt, 0);
if (v != NULL) {
if (varname[1] == 'D') {
extramodifiers = "H:";
} else { /* F */
extramodifiers = "T:";
}
}
}
if (v == NULL) {
dynamic = VarIsDynamic(ctxt, varname, namelen);
if (!haveModifier) {
/*
* No modifiers -- have specification length so we can return
* now.
*/
*lengthPtr = (int)(size_t)(tstr - str) + 1;
if (dynamic) {
char *pstr = bmake_strldup(str, (size_t)*lengthPtr);
*freePtr = pstr;
Buf_Destroy(&namebuf, TRUE);
return pstr;
} else {
Buf_Destroy(&namebuf, TRUE);
return (eflags & VARE_UNDEFERR) ? var_Error : varNoError;
}
} else {
/*
* Still need to get to the end of the variable specification,
* so kludge up a Var structure for the modifications
*/
v = bmake_malloc(sizeof(Var));
v->name = varname;
Buf_Init(&v->val, 1);
v->flags = VAR_JUNK;
Buf_Destroy(&namebuf, FALSE);
}
} else
Buf_Destroy(&namebuf, TRUE);
}
if (v->flags & VAR_IN_USE) {
Fatal("Variable %s is recursive.", v->name);
/*NOTREACHED*/
} else {
v->flags |= VAR_IN_USE;
}
/*
* Before doing any modification, we have to make sure the value
* has been fully expanded. If it looks like recursion might be
* necessary (there's a dollar sign somewhere in the variable's value)
* we just call Var_Subst to do any other substitutions that are
* necessary. Note that the value returned by Var_Subst will have
* been dynamically-allocated, so it will need freeing when we
* return.
*/
nstr = Buf_GetAll(&v->val, NULL);
if (strchr(nstr, '$') != NULL && (eflags & VARE_WANTRES) != 0) {
nstr = Var_Subst(nstr, ctxt, eflags);
*freePtr = nstr;
assert(nstr != NULL);
}
v->flags &= ~(unsigned)VAR_IN_USE;
if (haveModifier || extramodifiers != NULL) {
void *extraFree;
extraFree = NULL;
if (extramodifiers != NULL) {
const char *em = extramodifiers;
nstr = ApplyModifiers(&em, nstr, '(', ')',
v, ctxt, eflags, &extraFree);
}
if (haveModifier) {
/* Skip initial colon. */
tstr++;
nstr = ApplyModifiers(&tstr, nstr, startc, endc,
v, ctxt, eflags, freePtr);
free(extraFree);
} else {
*freePtr = extraFree;
}
}
/* Skip past endc if possible. */
*lengthPtr = (int)(size_t)(tstr + (*tstr ? 1 : 0) - str);
if (v->flags & VAR_FROM_ENV) {
Boolean destroy = nstr != Buf_GetAll(&v->val, NULL);
if (!destroy) {
/*
* Returning the value unmodified, so tell the caller to free
* the thing.
*/
*freePtr = nstr;
}
(void)VarFreeEnv(v, destroy);
} else if (v->flags & VAR_JUNK) {
/*
* Perform any freeing needed and set *freePtr to NULL so the caller
* doesn't try to free a static pointer.
* If VAR_KEEP is also set then we want to keep str(?) as is.
*/
if (!(v->flags & VAR_KEEP)) {
if (*freePtr != NULL) {
free(*freePtr);
*freePtr = NULL;
}
if (dynamic) {
nstr = bmake_strldup(str, (size_t)*lengthPtr);
*freePtr = nstr;
} else {
nstr = (eflags & VARE_UNDEFERR) ? var_Error : varNoError;
}
}
if (nstr != Buf_GetAll(&v->val, NULL))
Buf_Destroy(&v->val, TRUE);
free(v->name);
free(v);
}
return nstr;
}
/*-
*-----------------------------------------------------------------------
* Var_Subst --
* Substitute for all variables in the given string in the given context.
* If eflags & VARE_UNDEFERR, Parse_Error will be called when an undefined
* variable is encountered.
*
* Input:
* var Named variable || NULL for all
* str the string which to substitute
* ctxt the context wherein to find variables
* eflags VARE_UNDEFERR if undefineds are an error
* VARE_WANTRES if we actually want the result
* VARE_ASSIGN if we are in a := assignment
*
* Results:
* The resulting string.
*
* Side Effects:
* Any effects from the modifiers, such as ::=, :sh or !cmd!,
* if eflags contains VARE_WANTRES.
*-----------------------------------------------------------------------
*/
char *
Var_Subst(const char *str, GNode *ctxt, VarEvalFlags eflags)
{
Buffer buf; /* Buffer for forming things */
Boolean trailingBslash;
/* Set true if an error has already been reported,
* to prevent a plethora of messages when recursing */
static Boolean errorReported;
Buf_Init(&buf, 0);
errorReported = FALSE;
trailingBslash = FALSE; /* variable ends in \ */
while (*str) {
if (*str == '\n' && trailingBslash)
Buf_AddByte(&buf, ' ');
if (*str == '$' && str[1] == '$') {
/*
* A dollar sign may be escaped with another dollar sign.
* In such a case, we skip over the escape character and store the
* dollar sign into the buffer directly.
*/
if (save_dollars && (eflags & VARE_ASSIGN))
Buf_AddByte(&buf, '$');
Buf_AddByte(&buf, '$');
str += 2;
} else if (*str != '$') {
/*
* Skip as many characters as possible -- either to the end of
* the string or to the next dollar sign (variable invocation).
*/
const char *cp;
for (cp = str++; *str != '$' && *str != '\0'; str++)
continue;
Buf_AddBytesBetween(&buf, cp, str);
} else {
int length;
void *freeIt;
const char *val = Var_Parse(str, ctxt, eflags, &length, &freeIt);
if (val == var_Error || val == varNoError) {
/*
* If performing old-time variable substitution, skip over
* the variable and continue with the substitution. Otherwise,
* store the dollar sign and advance str so we continue with
* the string...
*/
if (oldVars) {
str += length;
} else if ((eflags & VARE_UNDEFERR) || val == var_Error) {
/*
* If variable is undefined, complain and skip the
* variable. The complaint will stop us from doing anything
* when the file is parsed.
*/
if (!errorReported) {
Parse_Error(PARSE_FATAL, "Undefined variable \"%.*s\"",
length, str);
}
str += length;
errorReported = TRUE;
} else {
Buf_AddByte(&buf, *str);
str += 1;
}
} else {
size_t val_len;
str += length;
val_len = strlen(val);
Buf_AddBytes(&buf, val, val_len);
trailingBslash = val_len > 0 && val[val_len - 1] == '\\';
}
free(freeIt);
freeIt = NULL;
}
}
return Buf_DestroyCompact(&buf);
}
/* Initialize the module. */
void
Var_Init(void)
{
VAR_INTERNAL = Targ_NewGN("Internal");
VAR_GLOBAL = Targ_NewGN("Global");
VAR_CMD = Targ_NewGN("Command");
}
void
Var_End(void)
{
Var_Stats();
}
void
Var_Stats(void)
{
Hash_DebugStats(&VAR_GLOBAL->context, "VAR_GLOBAL");
}
/****************** PRINT DEBUGGING INFO *****************/
static void
VarPrintVar(void *vp, void *data MAKE_ATTR_UNUSED)
{
Var *v = (Var *)vp;
fprintf(debug_file, "%-16s = %s\n", v->name, Buf_GetAll(&v->val, NULL));
}
/* Print all variables in a context, unordered. */
void
Var_Dump(GNode *ctxt)
{
Hash_ForEach(&ctxt->context, VarPrintVar, NULL);
}
![[BACK]](/icons/back.gif){kind=icon}
Return to var.c CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [cvs.NetBSD.org] / src / usr.bin / make