version 1.1.1.2.2.1, 2017/10/28 10:30:32 |
version 1.1.1.2.2.2, 2017/12/03 11:38:31 |
|
|
|
/* |
|
* Copyright (c) 2016 Matthias Brugger <mbrugger@suse.com> |
|
* |
|
* This file is dual-licensed: you can use it either under the terms |
|
* of the GPL or the X11 license, at your option. Note that this dual |
|
* licensing only applies to this file, and not this project as a |
|
* whole. |
|
* |
|
* a) This file is free software; you can redistribute it and/or |
|
* modify it under the terms of the GNU General Public License as |
|
* published by the Free Software Foundation; either version 2 of the |
|
* License, or (at your option) any later version. |
|
* |
|
* This file is distributed in the hope that it will be useful, |
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|
* GNU General Public License for more details. |
|
* |
|
* Or, alternatively, |
|
* |
|
* b) Permission is hereby granted, free of charge, to any person |
|
* obtaining a copy of this software and associated documentation |
|
* files (the "Software"), to deal in the Software without |
|
* restriction, including without limitation the rights to use, |
|
* copy, modify, merge, publish, distribute, sublicense, and/or |
|
* sell copies of the Software, and to permit persons to whom the |
|
* Software is furnished to do so, subject to the following |
|
* conditions: |
|
* |
|
* The above copyright notice and this permission notice shall be |
|
* included in all copies or substantial portions of the Software. |
|
* |
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
|
* OTHER DEALINGS IN THE SOFTWARE. |
|
*/ |
|
|
|
/dts-v1/; |
|
#include <dt-bindings/input/input.h> |
|
#include "rk3368.dtsi" |
|
|
|
/ { |
|
model = "Rockchip Orion R68"; |
|
compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368"; |
|
|
|
chosen { |
|
stdout-path = "serial2:115200n8"; |
|
}; |
|
|
|
memory { |
|
device_type = "memory"; |
|
reg = <0x0 0x0 0x0 0x80000000>; |
|
}; |
|
|
|
emmc_pwrseq: emmc-pwrseq { |
|
compatible = "mmc-pwrseq-emmc"; |
|
pinctrl-0 = <&emmc_reset>; |
|
pinctrl-names = "default"; |
|
reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; |
|
}; |
|
|
|
ext_gmac: external-gmac-clock { |
|
compatible = "fixed-clock"; |
|
#clock-cells = <0>; |
|
clock-frequency = <125000000>; |
|
clock-output-names = "ext_gmac"; |
|
}; |
|
|
|
keys: gpio-keys { |
|
compatible = "gpio-keys"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&pwr_key>; |
|
|
|
power { |
|
wakeup-source; |
|
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; |
|
label = "GPIO Power"; |
|
linux,code = <KEY_POWER>; |
|
}; |
|
}; |
|
|
|
leds: gpio-leds { |
|
compatible = "gpio-leds"; |
|
|
|
red { |
|
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; |
|
label = "orion:red:led"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&led_ctl>; |
|
default-state = "on"; |
|
}; |
|
|
|
blue { |
|
gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; |
|
label = "orion:blue:led"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&stby_pwren>; |
|
default-state = "off"; |
|
}; |
|
}; |
|
|
|
vcc_18: vcc18-regulator { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc_18"; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <1800000>; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
vin-supply = <&vcc_sys>; |
|
}; |
|
|
|
/* supplies both host and otg */ |
|
vcc_host: vcc-host-regulator { |
|
compatible = "regulator-fixed"; |
|
gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&host_vbus_drv>; |
|
regulator-name = "vcc_host"; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
vin-supply = <&vcc_sys>; |
|
}; |
|
|
|
vcc_io: vcc-io-regulator { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc_io"; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
vin-supply = <&vcc_sys>; |
|
}; |
|
|
|
vcc_lan: vcc-lan-regulator { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc_lan"; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
vin-supply = <&vcc_io>; |
|
}; |
|
|
|
vcc_sd: vcc-sd-regulator { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc_sd"; |
|
gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <3300000>; |
|
vin-supply = <&vcc_io>; |
|
}; |
|
|
|
vcc_sys: vcc-sys-regulator { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vcc_sys"; |
|
regulator-min-microvolt = <5000000>; |
|
regulator-max-microvolt = <5000000>; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
}; |
|
|
|
vccio_sd: vcc-io-sd-regulator { |
|
compatible = "regulator-fixed"; |
|
regulator-name= "vccio_sd"; |
|
regulator-min-microvolt = <1800000>; |
|
regulator-max-microvolt = <3300000>; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
vin-supply = <&vcc_io>; |
|
}; |
|
|
|
vccio_wl: vccio-wl-regulator { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vccio_wl"; |
|
regulator-min-microvolt = <3300000>; |
|
regulator-max-microvolt = <3300000>; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
vin-supply = <&vcc_io>; |
|
}; |
|
|
|
vdd_10: vdd-10-regulator { |
|
compatible = "regulator-fixed"; |
|
regulator-name = "vdd_10"; |
|
regulator-min-microvolt = <1000000>; |
|
regulator-max-microvolt = <1000000>; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
vin-supply = <&vcc_sys>; |
|
}; |
|
}; |
|
|
|
&emmc { |
|
bus-width = <8>; |
|
cap-mmc-highspeed; |
|
disable-wp; |
|
mmc-pwrseq = <&emmc_pwrseq>; |
|
mmc-hs200-1_2v; |
|
mmc-hs200-1_8v; |
|
non-removable; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; |
|
status = "okay"; |
|
}; |
|
|
|
&gmac { |
|
assigned-clocks = <&cru SCLK_MAC>; |
|
assigned-clock-parents = <&ext_gmac>; |
|
clock_in_out = "input"; |
|
phy-supply = <&vcc_lan>; |
|
phy-mode = "rgmii"; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&rgmii_pins>; |
|
snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; |
|
snps,reset-active-low; |
|
snps,reset-delays-us = <0 10000 1000000>; |
|
tx_delay = <0x30>; |
|
rx_delay = <0x10>; |
|
status = "ok"; |
|
}; |
|
|
|
&i2c0 { |
|
status = "okay"; |
|
|
|
vdd_cpu: syr827@40 { |
|
compatible = "silergy,syr827"; |
|
reg = <0x40>; |
|
fcs,suspend-voltage-selector = <1>; |
|
regulator-name = "vdd_cpu"; |
|
regulator-enable-ramp-delay = <300>; |
|
regulator-min-microvolt = <712500>; |
|
regulator-max-microvolt = <1500000>; |
|
regulator-ramp-delay = <8000>; |
|
regulator-always-on; |
|
regulator-boot-on; |
|
vin-supply = <&vcc_sys>; |
|
}; |
|
|
|
hym8563: hym8563@51 { |
|
compatible = "haoyu,hym8563"; |
|
reg = <0x51>; |
|
#clock-cells = <0>; |
|
clock-frequency = <32768>; |
|
clock-output-names = "xin32k"; |
|
/* rtc_int is not connected */ |
|
}; |
|
}; |
|
|
|
&pinctrl { |
|
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { |
|
bias-disable; |
|
drive-strength = <8>; |
|
}; |
|
|
|
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { |
|
bias-pull-up; |
|
drive-strength = <8>; |
|
}; |
|
|
|
emmc { |
|
emmc_bus8: emmc-bus8 { |
|
rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, |
|
<1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, |
|
<1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, |
|
<1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, |
|
<1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, |
|
<1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, |
|
<1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, |
|
<1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; |
|
}; |
|
|
|
emmc-clk { |
|
rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; |
|
}; |
|
|
|
emmc-cmd { |
|
rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; |
|
}; |
|
|
|
emmc_reset: emmc-reset { |
|
rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
|
|
keys { |
|
pwr_key: pwr-key { |
|
rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_down>; |
|
}; |
|
}; |
|
|
|
leds { |
|
stby_pwren: stby-pwren { |
|
rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
|
|
led_ctl: led-ctl { |
|
rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
|
|
sdmmc { |
|
sdmmc_clk: sdmmc-clk { |
|
rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; |
|
}; |
|
|
|
sdmmc_cmd: sdmmc-cmd { |
|
rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; |
|
}; |
|
|
|
sdmmc_cd: sdmmc-cd { |
|
rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; |
|
}; |
|
|
|
sdmmc_bus1: sdmmc-bus1 { |
|
rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; |
|
}; |
|
|
|
sdmmc_bus4: sdmmc-bus4 { |
|
rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, |
|
<2 6 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, |
|
<2 7 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, |
|
<2 8 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; |
|
}; |
|
}; |
|
|
|
usb { |
|
host_vbus_drv: host-vbus-drv { |
|
rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; |
|
}; |
|
}; |
|
}; |
|
|
|
&saradc { |
|
vref-supply = <&vcc_18>; |
|
status = "okay"; |
|
}; |
|
|
|
&sdmmc { |
|
bus-width = <4>; |
|
clock-frequency = <50000000>; |
|
max-frequency = <50000000>; |
|
cap-sd-highspeed; |
|
card-detect-delay = <200>; |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; |
|
vmmc-supply = <&vcc_sd>; |
|
vqmmc-supply = <&vccio_sd>; |
|
status = "okay"; |
|
}; |
|
|
|
&uart2 { |
|
status = "okay"; |
|
}; |
|
|
|
&uart4 { |
|
pinctrl-names = "default"; |
|
pinctrl-0 = <&uart4_xfer>; |
|
status = "okay"; |
|
}; |
|
|
|
&usb_host0_ehci { |
|
status = "okay"; |
|
}; |
|
|
|
&usb_otg { |
|
status = "okay"; |
|
}; |
|
|
|
&wdt { |
|
status = "okay"; |
|
}; |