Return to stingray-sata.dtsi CVS log | Up to [cvs.NetBSD.org] / src / sys / external / gpl2 / dts / dist / arch / arm64 / boot / dts / broadcom / stingray |
1.1 jmcneill 1: /* 2: * BSD LICENSE 3: * 4: * Copyright(c) 2016-2017 Broadcom. All rights reserved. 5: * 6: * Redistribution and use in source and binary forms, with or without 7: * modification, are permitted provided that the following conditions 8: * are met: 9: * 10: * * Redistributions of source code must retain the above copyright 11: * notice, this list of conditions and the following disclaimer. 12: * * Redistributions in binary form must reproduce the above copyright 13: * notice, this list of conditions and the following disclaimer in 14: * the documentation and/or other materials provided with the 15: * distribution. 16: * * Neither the name of Broadcom nor the names of its 17: * contributors may be used to endorse or promote products derived 18: * from this software without specific prior written permission. 19: * 20: * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 21: * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 22: * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 23: * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 24: * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 25: * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 26: * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27: * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28: * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29: * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 30: * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31: */ 32: 33: sata { 34: compatible = "simple-bus"; 35: #address-cells = <1>; 36: #size-cells = <1>; 37: ranges = <0x0 0x0 0x67d00000 0x00800000>; 38: 1.1.1.3 ! jmcneill 39: sata0: ahci@0 { 1.1 jmcneill 40: compatible = "brcm,iproc-ahci", "generic-ahci"; 1.1.1.3 ! jmcneill 41: reg = <0x00000000 0x1000>; 1.1 jmcneill 42: reg-names = "ahci"; 1.1.1.3 ! jmcneill 43: interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; 1.1 jmcneill 44: #address-cells = <1>; 45: #size-cells = <0>; 46: status = "disabled"; 47: 48: sata0_port0: sata-port@0 { 49: reg = <0>; 50: phys = <&sata0_phy0>; 51: phy-names = "sata-phy"; 52: }; 53: }; 54: 1.1.1.3 ! jmcneill 55: sata_phy0: sata_phy@2100 { 1.1 jmcneill 56: compatible = "brcm,iproc-sr-sata-phy"; 1.1.1.3 ! jmcneill 57: reg = <0x00002100 0x1000>; 1.1 jmcneill 58: reg-names = "phy"; 59: #address-cells = <1>; 60: #size-cells = <0>; 61: status = "disabled"; 62: 63: sata0_phy0: sata-phy@0 { 64: reg = <0>; 65: #phy-cells = <0>; 66: }; 67: }; 68: 1.1.1.3 ! jmcneill 69: sata1: ahci@10000 { 1.1 jmcneill 70: compatible = "brcm,iproc-ahci", "generic-ahci"; 1.1.1.3 ! jmcneill 71: reg = <0x00010000 0x1000>; 1.1 jmcneill 72: reg-names = "ahci"; 1.1.1.3 ! jmcneill 73: interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>; 1.1 jmcneill 74: #address-cells = <1>; 75: #size-cells = <0>; 76: status = "disabled"; 77: 78: sata1_port0: sata-port@0 { 79: reg = <0>; 80: phys = <&sata1_phy0>; 81: phy-names = "sata-phy"; 82: }; 83: }; 84: 1.1.1.3 ! jmcneill 85: sata_phy1: sata_phy@12100 { 1.1 jmcneill 86: compatible = "brcm,iproc-sr-sata-phy"; 1.1.1.3 ! jmcneill 87: reg = <0x00012100 0x1000>; 1.1 jmcneill 88: reg-names = "phy"; 89: #address-cells = <1>; 90: #size-cells = <0>; 91: status = "disabled"; 92: 93: sata1_phy0: sata-phy@0 { 94: reg = <0>; 95: #phy-cells = <0>; 96: }; 97: }; 98: 1.1.1.3 ! jmcneill 99: sata2: ahci@20000 { 1.1 jmcneill 100: compatible = "brcm,iproc-ahci", "generic-ahci"; 1.1.1.3 ! jmcneill 101: reg = <0x00020000 0x1000>; 1.1 jmcneill 102: reg-names = "ahci"; 1.1.1.3 ! jmcneill 103: interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>; 1.1 jmcneill 104: #address-cells = <1>; 105: #size-cells = <0>; 106: status = "disabled"; 107: 108: sata2_port0: sata-port@0 { 109: reg = <0>; 110: phys = <&sata2_phy0>; 111: phy-names = "sata-phy"; 112: }; 113: }; 114: 1.1.1.3 ! jmcneill 115: sata_phy2: sata_phy@22100 { 1.1 jmcneill 116: compatible = "brcm,iproc-sr-sata-phy"; 1.1.1.3 ! jmcneill 117: reg = <0x00022100 0x1000>; 1.1 jmcneill 118: reg-names = "phy"; 119: #address-cells = <1>; 120: #size-cells = <0>; 121: status = "disabled"; 122: 123: sata2_phy0: sata-phy@0 { 124: reg = <0>; 125: #phy-cells = <0>; 126: }; 127: }; 128: 1.1.1.3 ! jmcneill 129: sata3: ahci@30000 { 1.1 jmcneill 130: compatible = "brcm,iproc-ahci", "generic-ahci"; 1.1.1.3 ! jmcneill 131: reg = <0x00030000 0x1000>; 1.1 jmcneill 132: reg-names = "ahci"; 1.1.1.3 ! jmcneill 133: interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; 1.1 jmcneill 134: #address-cells = <1>; 135: #size-cells = <0>; 136: status = "disabled"; 137: 138: sata3_port0: sata-port@0 { 139: reg = <0>; 140: phys = <&sata3_phy0>; 141: phy-names = "sata-phy"; 142: }; 143: }; 144: 1.1.1.3 ! jmcneill 145: sata_phy3: sata_phy@32100 { 1.1 jmcneill 146: compatible = "brcm,iproc-sr-sata-phy"; 1.1.1.3 ! jmcneill 147: reg = <0x00032100 0x1000>; 1.1 jmcneill 148: reg-names = "phy"; 149: #address-cells = <1>; 150: #size-cells = <0>; 151: status = "disabled"; 152: 153: sata3_phy0: sata-phy@0 { 154: reg = <0>; 155: #phy-cells = <0>; 156: }; 157: }; 158: 1.1.1.3 ! jmcneill 159: sata4: ahci@100000 { 1.1 jmcneill 160: compatible = "brcm,iproc-ahci", "generic-ahci"; 1.1.1.3 ! jmcneill 161: reg = <0x00100000 0x1000>; 1.1 jmcneill 162: reg-names = "ahci"; 1.1.1.3 ! jmcneill 163: interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; 1.1 jmcneill 164: #address-cells = <1>; 165: #size-cells = <0>; 166: status = "disabled"; 167: 168: sata4_port0: sata-port@0 { 169: reg = <0>; 170: phys = <&sata4_phy0>; 171: phy-names = "sata-phy"; 172: }; 173: }; 174: 1.1.1.3 ! jmcneill 175: sata_phy4: sata_phy@102100 { 1.1 jmcneill 176: compatible = "brcm,iproc-sr-sata-phy"; 1.1.1.3 ! jmcneill 177: reg = <0x00102100 0x1000>; 1.1 jmcneill 178: reg-names = "phy"; 179: #address-cells = <1>; 180: #size-cells = <0>; 181: status = "disabled"; 182: 183: sata4_phy0: sata-phy@0 { 184: reg = <0>; 185: #phy-cells = <0>; 186: }; 187: }; 188: 1.1.1.3 ! jmcneill 189: sata5: ahci@110000 { 1.1 jmcneill 190: compatible = "brcm,iproc-ahci", "generic-ahci"; 1.1.1.3 ! jmcneill 191: reg = <0x00110000 0x1000>; 1.1 jmcneill 192: reg-names = "ahci"; 1.1.1.3 ! jmcneill 193: interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; 1.1 jmcneill 194: #address-cells = <1>; 195: #size-cells = <0>; 196: status = "disabled"; 197: 198: sata5_port0: sata-port@0 { 199: reg = <0>; 200: phys = <&sata5_phy0>; 201: phy-names = "sata-phy"; 202: }; 203: }; 204: 1.1.1.3 ! jmcneill 205: sata_phy5: sata_phy@112100 { 1.1 jmcneill 206: compatible = "brcm,iproc-sr-sata-phy"; 1.1.1.3 ! jmcneill 207: reg = <0x00112100 0x1000>; 1.1 jmcneill 208: reg-names = "phy"; 209: #address-cells = <1>; 210: #size-cells = <0>; 211: status = "disabled"; 212: 213: sata5_phy0: sata-phy@0 { 214: reg = <0>; 215: #phy-cells = <0>; 216: }; 217: }; 218: 1.1.1.3 ! jmcneill 219: sata6: ahci@120000 { 1.1 jmcneill 220: compatible = "brcm,iproc-ahci", "generic-ahci"; 1.1.1.3 ! jmcneill 221: reg = <0x00120000 0x1000>; 1.1 jmcneill 222: reg-names = "ahci"; 1.1.1.3 ! jmcneill 223: interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>; 1.1 jmcneill 224: #address-cells = <1>; 225: #size-cells = <0>; 226: status = "disabled"; 227: 228: sata6_port0: sata-port@0 { 229: reg = <0>; 230: phys = <&sata6_phy0>; 231: phy-names = "sata-phy"; 232: }; 233: }; 234: 1.1.1.3 ! jmcneill 235: sata_phy6: sata_phy@122100 { 1.1 jmcneill 236: compatible = "brcm,iproc-sr-sata-phy"; 1.1.1.3 ! jmcneill 237: reg = <0x00122100 0x1000>; 1.1 jmcneill 238: reg-names = "phy"; 239: #address-cells = <1>; 240: #size-cells = <0>; 241: status = "disabled"; 242: 243: sata6_phy0: sata-phy@0 { 244: reg = <0>; 245: #phy-cells = <0>; 246: }; 247: }; 248: 1.1.1.3 ! jmcneill 249: sata7: ahci@130000 { 1.1 jmcneill 250: compatible = "brcm,iproc-ahci", "generic-ahci"; 1.1.1.3 ! jmcneill 251: reg = <0x00130000 0x1000>; 1.1 jmcneill 252: reg-names = "ahci"; 1.1.1.3 ! jmcneill 253: interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; 1.1 jmcneill 254: #address-cells = <1>; 255: #size-cells = <0>; 256: status = "disabled"; 257: 258: sata7_port0: sata-port@0 { 259: reg = <0>; 260: phys = <&sata7_phy0>; 261: phy-names = "sata-phy"; 262: }; 263: }; 264: 1.1.1.3 ! jmcneill 265: sata_phy7: sata_phy@132100 { 1.1 jmcneill 266: compatible = "brcm,iproc-sr-sata-phy"; 1.1.1.3 ! jmcneill 267: reg = <0x00132100 0x1000>; 1.1 jmcneill 268: reg-names = "phy"; 269: #address-cells = <1>; 270: #size-cells = <0>; 271: status = "disabled"; 272: 273: sata7_phy0: sata-phy@0 { 274: reg = <0>; 275: #phy-cells = <0>; 276: }; 277: }; 278: };