Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.

===================================================================
RCS file: /ftp/cvs/cvsroot/src/sys/external/gpl2/dts/dist/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts,v
rcsdiff: /ftp/cvs/cvsroot/src/sys/external/gpl2/dts/dist/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts,v: warning: Unknown phrases like `commitid ...;' are present.
retrieving revision 1.1.1.4.2.1
retrieving revision 1.1.1.4.2.2
diff -u -p -r1.1.1.4.2.1 -r1.1.1.4.2.2
--- src/sys/external/gpl2/dts/dist/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts	2019/06/10 22:08:47	1.1.1.4.2.1
+++ src/sys/external/gpl2/dts/dist/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts	2020/04/08 14:08:37	1.1.1.4.2.2
@@ -52,20 +52,21 @@
 
 	amlogic,tx-delay-ns = <2>;
 
-	/* External PHY reset is shared with internal PHY Led signals */
-	snps,reset-gpio = <&gpio GPIOZ_14 0>;
-	snps,reset-delays-us = <0 10000 1000000>;
-	snps,reset-active-low;
-
 	/* External PHY is in RGMII */
 	phy-mode = "rgmii";
 };
 
 &external_mdio {
 	external_phy: ethernet-phy@0 {
-		compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+		/* Realtek RTL8211F (0x001cc916) */
 		reg = <0>;
 		max-speed = <1000>;
+
+		/* External PHY reset is shared with internal PHY Led signal */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
 		interrupt-parent = <&gpio_intc>;
 		/* MAC_INTR on GPIOZ_15 */
 		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;