Annotation of src/sys/external/gpl2/dts/dist/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts, Revision 1.1.1.3
1.1 jmcneill 1: /*
2: * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3: *
4: * This file is dual-licensed: you can use it either under the terms
5: * of the GPL or the X11 license, at your option. Note that this dual
6: * licensing only applies to this file, and not this project as a
7: * whole.
8: *
9: * a) This file is free software; you can redistribute it and/or
10: * modify it under the terms of the GNU General Public License as
11: * published by the Free Software Foundation; either version 2 of the
12: * License, or (at your option) any later version.
13: *
14: * This file is distributed in the hope that it will be useful,
15: * but WITHOUT ANY WARRANTY; without even the implied warranty of
16: * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: * GNU General Public License for more details.
18: *
19: * Or, alternatively,
20: *
21: * b) Permission is hereby granted, free of charge, to any person
22: * obtaining a copy of this software and associated documentation
23: * files (the "Software"), to deal in the Software without
24: * restriction, including without limitation the rights to use,
25: * copy, modify, merge, publish, distribute, sublicense, and/or
26: * sell copies of the Software, and to permit persons to whom the
27: * Software is furnished to do so, subject to the following
28: * conditions:
29: *
30: * The above copyright notice and this permission notice shall be
31: * included in all copies or substantial portions of the Software.
32: *
33: * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34: * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35: * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36: * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37: * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38: * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39: * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40: * OTHER DEALINGS IN THE SOFTWARE.
41: */
42:
43: /dts-v1/;
44: #include "sun5i-a10s.dtsi"
45: #include "sunxi-common-regulators.dtsi"
46: #include <dt-bindings/gpio/gpio.h>
47:
48: / {
49: model = "Auxtek t004 A10s hdmi tv-stick";
50: compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s";
51:
52: aliases {
53: serial0 = &uart0;
54: };
55:
56: chosen {
57: stdout-path = "serial0:115200n8";
58: };
59:
60: leds {
61: compatible = "gpio-leds";
62: pinctrl-names = "default";
63: pinctrl-0 = <&led_pins_t004>;
64:
65: red {
66: label = "t004-tv-dongle:red:usr";
67: gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
68: default-state = "on";
69: };
70: };
71:
72: reg_vmmc1: vmmc1 {
73: compatible = "regulator-fixed";
74: pinctrl-names = "default";
75: pinctrl-0 = <&mmc1_vcc_en_pin_t004>;
76: regulator-name = "vmmc1";
77: regulator-min-microvolt = <3300000>;
78: regulator-max-microvolt = <3300000>;
79: enable-active-high;
80: gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */
81: };
82: };
83:
84: &ehci0 {
85: status = "okay";
86: };
87:
88: &i2c0 {
89: pinctrl-names = "default";
90: pinctrl-0 = <&i2c0_pins_a>;
91: status = "okay";
92:
93: axp152: pmic@30 {
94: compatible = "x-powers,axp152";
95: reg = <0x30>;
96: interrupts = <0>;
97: interrupt-controller;
98: #interrupt-cells = <1>;
99: };
100: };
101:
102: &mmc0 {
103: pinctrl-names = "default";
104: pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
105: vmmc-supply = <®_vcc3v3>;
106: bus-width = <4>;
107: cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
108: cd-inverted;
109: status = "okay";
110: };
111:
112: &mmc1 {
113: pinctrl-names = "default";
114: pinctrl-0 = <&mmc1_pins_a>;
115: vmmc-supply = <®_vmmc1>;
116: bus-width = <4>;
117: non-removable;
118: cap-sdio-irq;
119: status = "okay";
120: };
121:
122: &ohci0 {
123: status = "okay";
124: };
125:
126: &otg_sram {
127: status = "okay";
128: };
129:
130: &pio {
131: usb0_id_detect_pin: usb0_id_detect_pin@0 {
132: pins = "PG12";
133: function = "gpio_in";
134: bias-pull-up;
135: };
136:
137: mmc0_cd_pin_t004: mmc0_cd_pin@0 {
138: pins = "PG1";
139: function = "gpio_in";
140: bias-pull-up;
141: };
142:
143: mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 {
144: pins = "PB18";
145: function = "gpio_out";
146: };
147:
148: led_pins_t004: led_pins@0 {
149: pins = "PB2";
150: function = "gpio_out";
151: drive-strength = <20>;
152: };
153: };
154:
155: ®_usb1_vbus {
156: gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
157: status = "okay";
158: };
159:
160: &uart0 {
161: pinctrl-names = "default";
162: pinctrl-0 = <&uart0_pins_a>;
163: status = "okay";
164: };
165:
166: &usb_otg {
167: dr_mode = "otg";
168: status = "okay";
169: };
170:
171: &usbphy {
172: pinctrl-names = "default";
173: pinctrl-0 = <&usb0_id_detect_pin>;
174: usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
175: usb1_vbus-supply = <®_usb1_vbus>;
176: status = "okay";
177: };
CVSweb <webmaster@jp.NetBSD.org>