Annotation of src/sys/external/gpl2/dts/dist/arch/arm/boot/dts/r8a7790-lager.dts, Revision 1.1.1.1.4.2
1.1.1.1.4.2! snj 1: /*
! 2: * Device Tree Source for the Lager board
! 3: *
! 4: * Copyright (C) 2013-2014 Renesas Solutions Corp.
! 5: * Copyright (C) 2014 Cogent Embedded, Inc.
! 6: * Copyright (C) 2015-2016 Renesas Electronics Corporation
! 7: *
! 8: * This file is licensed under the terms of the GNU General Public License
! 9: * version 2. This program is licensed "as is" without any warranty of any
! 10: * kind, whether express or implied.
! 11: */
! 12:
! 13: /*
! 14: * SSI-AK4643
! 15: *
! 16: * SW1: 1: AK4643
! 17: * 2: CN22
! 18: * 3: ADV7511
! 19: *
! 20: * This command is required when Playback/Capture
! 21: *
! 22: * amixer set "LINEOUT Mixer DACL" on
! 23: * amixer set "DVC Out" 100%
! 24: * amixer set "DVC In" 100%
! 25: *
! 26: * You can use Mute
! 27: *
! 28: * amixer set "DVC Out Mute" on
! 29: * amixer set "DVC In Mute" on
! 30: *
! 31: * You can use Volume Ramp
! 32: *
! 33: * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
! 34: * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
! 35: * amixer set "DVC Out Ramp" on
! 36: * aplay xxx.wav &
! 37: * amixer set "DVC Out" 80% // Volume Down
! 38: * amixer set "DVC Out" 100% // Volume Up
! 39: */
! 40:
! 41: /dts-v1/;
! 42: #include "r8a7790.dtsi"
! 43: #include <dt-bindings/gpio/gpio.h>
! 44: #include <dt-bindings/input/input.h>
! 45:
! 46: / {
! 47: model = "Lager";
! 48: compatible = "renesas,lager", "renesas,r8a7790";
! 49:
! 50: aliases {
! 51: serial0 = &scif0;
! 52: serial1 = &scifa1;
! 53: i2c8 = &gpioi2c1;
! 54: i2c10 = &i2cexio0;
! 55: i2c11 = &i2cexio1;
! 56: };
! 57:
! 58: chosen {
! 59: bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
! 60: stdout-path = "serial0:115200n8";
! 61: };
! 62:
! 63: memory@40000000 {
! 64: device_type = "memory";
! 65: reg = <0 0x40000000 0 0x40000000>;
! 66: };
! 67:
! 68: memory@140000000 {
! 69: device_type = "memory";
! 70: reg = <1 0x40000000 0 0xc0000000>;
! 71: };
! 72:
! 73: lbsc {
! 74: #address-cells = <1>;
! 75: #size-cells = <1>;
! 76: };
! 77:
! 78: keyboard {
! 79: compatible = "gpio-keys";
! 80:
! 81: one {
! 82: linux,code = <KEY_1>;
! 83: label = "SW2-1";
! 84: wakeup-source;
! 85: debounce-interval = <20>;
! 86: gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
! 87: };
! 88: two {
! 89: linux,code = <KEY_2>;
! 90: label = "SW2-2";
! 91: wakeup-source;
! 92: debounce-interval = <20>;
! 93: gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
! 94: };
! 95: three {
! 96: linux,code = <KEY_3>;
! 97: label = "SW2-3";
! 98: wakeup-source;
! 99: debounce-interval = <20>;
! 100: gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
! 101: };
! 102: four {
! 103: linux,code = <KEY_4>;
! 104: label = "SW2-4";
! 105: wakeup-source;
! 106: debounce-interval = <20>;
! 107: gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
! 108: };
! 109: };
! 110:
! 111: leds {
! 112: compatible = "gpio-leds";
! 113: led6 {
! 114: gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
! 115: };
! 116: led7 {
! 117: gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
! 118: };
! 119: led8 {
! 120: gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
! 121: };
! 122: };
! 123:
! 124: fixedregulator3v3: regulator-3v3 {
! 125: compatible = "regulator-fixed";
! 126: regulator-name = "fixed-3.3V";
! 127: regulator-min-microvolt = <3300000>;
! 128: regulator-max-microvolt = <3300000>;
! 129: regulator-boot-on;
! 130: regulator-always-on;
! 131: };
! 132:
! 133: vcc_sdhi0: regulator-vcc-sdhi0 {
! 134: compatible = "regulator-fixed";
! 135:
! 136: regulator-name = "SDHI0 Vcc";
! 137: regulator-min-microvolt = <3300000>;
! 138: regulator-max-microvolt = <3300000>;
! 139:
! 140: gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
! 141: enable-active-high;
! 142: };
! 143:
! 144: vccq_sdhi0: regulator-vccq-sdhi0 {
! 145: compatible = "regulator-gpio";
! 146:
! 147: regulator-name = "SDHI0 VccQ";
! 148: regulator-min-microvolt = <1800000>;
! 149: regulator-max-microvolt = <3300000>;
! 150:
! 151: gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
! 152: gpios-states = <1>;
! 153: states = <3300000 1
! 154: 1800000 0>;
! 155: };
! 156:
! 157: vcc_sdhi2: regulator-vcc-sdhi2 {
! 158: compatible = "regulator-fixed";
! 159:
! 160: regulator-name = "SDHI2 Vcc";
! 161: regulator-min-microvolt = <3300000>;
! 162: regulator-max-microvolt = <3300000>;
! 163:
! 164: gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
! 165: enable-active-high;
! 166: };
! 167:
! 168: vccq_sdhi2: regulator-vccq-sdhi2 {
! 169: compatible = "regulator-gpio";
! 170:
! 171: regulator-name = "SDHI2 VccQ";
! 172: regulator-min-microvolt = <1800000>;
! 173: regulator-max-microvolt = <3300000>;
! 174:
! 175: gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
! 176: gpios-states = <1>;
! 177: states = <3300000 1
! 178: 1800000 0>;
! 179: };
! 180:
! 181: audio_clock: audio_clock {
! 182: compatible = "fixed-clock";
! 183: #clock-cells = <0>;
! 184: clock-frequency = <11289600>;
! 185: };
! 186:
! 187: rsnd_ak4643: sound {
! 188: compatible = "simple-audio-card";
! 189:
! 190: simple-audio-card,format = "left_j";
! 191: simple-audio-card,bitclock-master = <&sndcodec>;
! 192: simple-audio-card,frame-master = <&sndcodec>;
! 193:
! 194: sndcpu: simple-audio-card,cpu {
! 195: sound-dai = <&rcar_sound>;
! 196: };
! 197:
! 198: sndcodec: simple-audio-card,codec {
! 199: sound-dai = <&ak4643>;
! 200: clocks = <&audio_clock>;
! 201: };
! 202: };
! 203:
! 204: vga-encoder {
! 205: compatible = "adi,adv7123";
! 206:
! 207: ports {
! 208: #address-cells = <1>;
! 209: #size-cells = <0>;
! 210:
! 211: port@0 {
! 212: reg = <0>;
! 213: adv7123_in: endpoint {
! 214: remote-endpoint = <&du_out_rgb>;
! 215: };
! 216: };
! 217: port@1 {
! 218: reg = <1>;
! 219: adv7123_out: endpoint {
! 220: remote-endpoint = <&vga_in>;
! 221: };
! 222: };
! 223: };
! 224: };
! 225:
! 226: vga {
! 227: compatible = "vga-connector";
! 228:
! 229: port {
! 230: vga_in: endpoint {
! 231: remote-endpoint = <&adv7123_out>;
! 232: };
! 233: };
! 234: };
! 235:
! 236: hdmi-in {
! 237: compatible = "hdmi-connector";
! 238: type = "a";
! 239:
! 240: port {
! 241: hdmi_con_in: endpoint {
! 242: remote-endpoint = <&adv7612_in>;
! 243: };
! 244: };
! 245: };
! 246:
! 247: hdmi-out {
! 248: compatible = "hdmi-connector";
! 249: type = "a";
! 250:
! 251: port {
! 252: hdmi_con_out: endpoint {
! 253: remote-endpoint = <&adv7511_out>;
! 254: };
! 255: };
! 256: };
! 257:
! 258: x2_clk: x2-clock {
! 259: compatible = "fixed-clock";
! 260: #clock-cells = <0>;
! 261: clock-frequency = <148500000>;
! 262: };
! 263:
! 264: x13_clk: x13-clock {
! 265: compatible = "fixed-clock";
! 266: #clock-cells = <0>;
! 267: clock-frequency = <148500000>;
! 268: };
! 269:
! 270: gpioi2c1: i2c-8 {
! 271: #address-cells = <1>;
! 272: #size-cells = <0>;
! 273: compatible = "i2c-gpio";
! 274: status = "disabled";
! 275: gpios = <&gpio1 17 GPIO_ACTIVE_HIGH /* sda */
! 276: &gpio1 16 GPIO_ACTIVE_HIGH /* scl */
! 277: >;
! 278: i2c-gpio,delay-us = <5>;
! 279: };
! 280:
! 281: /*
! 282: * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
! 283: * We use the I2C demuxer, so the desired IP core can be selected at runtime
! 284: * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
! 285: * Note: For testing the I2C slave feature, it is convenient to connect this
! 286: * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
! 287: * instantiate the slave device at runtime according to the documentation.
! 288: * You can then communicate with the slave via IIC3.
! 289: *
! 290: * IIC0/I2C0 does not appear to support fallback to GPIO.
! 291: */
! 292: i2cexio0: i2c-10 {
! 293: compatible = "i2c-demux-pinctrl";
! 294: i2c-parent = <&iic0>, <&i2c0>;
! 295: i2c-bus-name = "i2c-exio0";
! 296: #address-cells = <1>;
! 297: #size-cells = <0>;
! 298: };
! 299:
! 300: /*
! 301: * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
! 302: * This is similar to the arangement described for i2cexio0 (above)
! 303: * with a fallback to GPIO also provided.
! 304: */
! 305: i2cexio1: i2c-11 {
! 306: compatible = "i2c-demux-pinctrl";
! 307: i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
! 308: i2c-bus-name = "i2c-exio1";
! 309: #address-cells = <1>;
! 310: #size-cells = <0>;
! 311: };
! 312: };
! 313:
! 314: &du {
! 315: pinctrl-0 = <&du_pins>;
! 316: pinctrl-names = "default";
! 317: status = "okay";
! 318:
! 319: clocks = <&mstp7_clks R8A7790_CLK_DU0>,
! 320: <&mstp7_clks R8A7790_CLK_DU1>,
! 321: <&mstp7_clks R8A7790_CLK_DU2>,
! 322: <&mstp7_clks R8A7790_CLK_LVDS0>,
! 323: <&mstp7_clks R8A7790_CLK_LVDS1>,
! 324: <&x13_clk>, <&x2_clk>;
! 325: clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1",
! 326: "dclkin.0", "dclkin.1";
! 327:
! 328: ports {
! 329: port@0 {
! 330: endpoint {
! 331: remote-endpoint = <&adv7123_in>;
! 332: };
! 333: };
! 334: port@1 {
! 335: endpoint {
! 336: remote-endpoint = <&adv7511_in>;
! 337: };
! 338: };
! 339: port@2 {
! 340: lvds_connector: endpoint {
! 341: };
! 342: };
! 343: };
! 344: };
! 345:
! 346: &extal_clk {
! 347: clock-frequency = <20000000>;
! 348: };
! 349:
! 350: &pfc {
! 351: pinctrl-0 = <&scif_clk_pins>;
! 352: pinctrl-names = "default";
! 353:
! 354: du_pins: du {
! 355: groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
! 356: function = "du";
! 357: };
! 358:
! 359: scif0_pins: scif0 {
! 360: groups = "scif0_data";
! 361: function = "scif0";
! 362: };
! 363:
! 364: scif_clk_pins: scif_clk {
! 365: groups = "scif_clk";
! 366: function = "scif_clk";
! 367: };
! 368:
! 369: ether_pins: ether {
! 370: groups = "eth_link", "eth_mdio", "eth_rmii";
! 371: function = "eth";
! 372: };
! 373:
! 374: phy1_pins: phy1 {
! 375: groups = "intc_irq0";
! 376: function = "intc";
! 377: };
! 378:
! 379: scifa1_pins: scifa1 {
! 380: groups = "scifa1_data";
! 381: function = "scifa1";
! 382: };
! 383:
! 384: sdhi0_pins: sd0 {
! 385: groups = "sdhi0_data4", "sdhi0_ctrl";
! 386: function = "sdhi0";
! 387: power-source = <3300>;
! 388: };
! 389:
! 390: sdhi0_pins_uhs: sd0_uhs {
! 391: groups = "sdhi0_data4", "sdhi0_ctrl";
! 392: function = "sdhi0";
! 393: power-source = <1800>;
! 394: };
! 395:
! 396: sdhi2_pins: sd2 {
! 397: groups = "sdhi2_data4", "sdhi2_ctrl";
! 398: function = "sdhi2";
! 399: power-source = <3300>;
! 400: };
! 401:
! 402: sdhi2_pins_uhs: sd2_uhs {
! 403: groups = "sdhi2_data4", "sdhi2_ctrl";
! 404: function = "sdhi2";
! 405: power-source = <1800>;
! 406: };
! 407:
! 408: mmc1_pins: mmc1 {
! 409: groups = "mmc1_data8", "mmc1_ctrl";
! 410: function = "mmc1";
! 411: };
! 412:
! 413: qspi_pins: qspi {
! 414: groups = "qspi_ctrl", "qspi_data4";
! 415: function = "qspi";
! 416: };
! 417:
! 418: msiof1_pins: msiof1 {
! 419: groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
! 420: "msiof1_tx";
! 421: function = "msiof1";
! 422: };
! 423:
! 424: i2c0_pins: i2c0 {
! 425: groups = "i2c0";
! 426: function = "i2c0";
! 427: };
! 428:
! 429: iic0_pins: iic0 {
! 430: groups = "iic0";
! 431: function = "iic0";
! 432: };
! 433:
! 434: i2c1_pins: i2c1 {
! 435: groups = "i2c1";
! 436: function = "i2c1";
! 437: };
! 438:
! 439: iic1_pins: iic1 {
! 440: groups = "iic1";
! 441: function = "iic1";
! 442: };
! 443:
! 444: iic2_pins: iic2 {
! 445: groups = "iic2";
! 446: function = "iic2";
! 447: };
! 448:
! 449: iic3_pins: iic3 {
! 450: groups = "iic3";
! 451: function = "iic3";
! 452: };
! 453:
! 454: hsusb_pins: hsusb {
! 455: groups = "usb0_ovc_vbus";
! 456: function = "usb0";
! 457: };
! 458:
! 459: usb0_pins: usb0 {
! 460: groups = "usb0";
! 461: function = "usb0";
! 462: };
! 463:
! 464: usb1_pins: usb1 {
! 465: groups = "usb1";
! 466: function = "usb1";
! 467: };
! 468:
! 469: usb2_pins: usb2 {
! 470: groups = "usb2";
! 471: function = "usb2";
! 472: };
! 473:
! 474: vin0_pins: vin0 {
! 475: groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
! 476: function = "vin0";
! 477: };
! 478:
! 479: vin1_pins: vin1 {
! 480: groups = "vin1_data8", "vin1_clk";
! 481: function = "vin1";
! 482: };
! 483:
! 484: sound_pins: sound {
! 485: groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
! 486: function = "ssi";
! 487: };
! 488:
! 489: sound_clk_pins: sound_clk {
! 490: groups = "audio_clk_a";
! 491: function = "audio_clk";
! 492: };
! 493: };
! 494:
! 495: ðer {
! 496: pinctrl-0 = <ðer_pins &phy1_pins>;
! 497: pinctrl-names = "default";
! 498:
! 499: phy-handle = <&phy1>;
! 500: renesas,ether-link-active-low;
! 501: status = "okay";
! 502:
! 503: phy1: ethernet-phy@1 {
! 504: reg = <1>;
! 505: interrupt-parent = <&irqc0>;
! 506: interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
! 507: micrel,led-mode = <1>;
! 508: };
! 509: };
! 510:
! 511: &cmt0 {
! 512: status = "okay";
! 513: };
! 514:
! 515: &mmcif1 {
! 516: pinctrl-0 = <&mmc1_pins>;
! 517: pinctrl-names = "default";
! 518:
! 519: vmmc-supply = <&fixedregulator3v3>;
! 520: bus-width = <8>;
! 521: non-removable;
! 522: status = "okay";
! 523: };
! 524:
! 525: &sata1 {
! 526: status = "okay";
! 527: };
! 528:
! 529: &qspi {
! 530: pinctrl-0 = <&qspi_pins>;
! 531: pinctrl-names = "default";
! 532:
! 533: status = "okay";
! 534:
! 535: flash: flash@0 {
! 536: compatible = "spansion,s25fl512s", "jedec,spi-nor";
! 537: reg = <0>;
! 538: spi-max-frequency = <30000000>;
! 539: spi-tx-bus-width = <4>;
! 540: spi-rx-bus-width = <4>;
! 541: spi-cpha;
! 542: spi-cpol;
! 543: m25p,fast-read;
! 544:
! 545: partitions {
! 546: compatible = "fixed-partitions";
! 547: #address-cells = <1>;
! 548: #size-cells = <1>;
! 549:
! 550: partition@0 {
! 551: label = "loader";
! 552: reg = <0x00000000 0x00040000>;
! 553: read-only;
! 554: };
! 555: partition@40000 {
! 556: label = "user";
! 557: reg = <0x00040000 0x00400000>;
! 558: read-only;
! 559: };
! 560: partition@440000 {
! 561: label = "flash";
! 562: reg = <0x00440000 0x03bc0000>;
! 563: };
! 564: };
! 565: };
! 566: };
! 567:
! 568: &scif0 {
! 569: pinctrl-0 = <&scif0_pins>;
! 570: pinctrl-names = "default";
! 571:
! 572: status = "okay";
! 573: };
! 574:
! 575: &scifa1 {
! 576: pinctrl-0 = <&scifa1_pins>;
! 577: pinctrl-names = "default";
! 578:
! 579: status = "okay";
! 580: };
! 581:
! 582: &scif_clk {
! 583: clock-frequency = <14745600>;
! 584: status = "okay";
! 585: };
! 586:
! 587: &msiof1 {
! 588: pinctrl-0 = <&msiof1_pins>;
! 589: pinctrl-names = "default";
! 590:
! 591: status = "okay";
! 592:
! 593: pmic: pmic@0 {
! 594: compatible = "renesas,r2a11302ft";
! 595: reg = <0>;
! 596: spi-max-frequency = <6000000>;
! 597: spi-cpol;
! 598: spi-cpha;
! 599: };
! 600: };
! 601:
! 602: &sdhi0 {
! 603: pinctrl-0 = <&sdhi0_pins>;
! 604: pinctrl-1 = <&sdhi0_pins_uhs>;
! 605: pinctrl-names = "default", "state_uhs";
! 606:
! 607: vmmc-supply = <&vcc_sdhi0>;
! 608: vqmmc-supply = <&vccq_sdhi0>;
! 609: cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
! 610: sd-uhs-sdr50;
! 611: sd-uhs-sdr104;
! 612: status = "okay";
! 613: };
! 614:
! 615: &sdhi2 {
! 616: pinctrl-0 = <&sdhi2_pins>;
! 617: pinctrl-1 = <&sdhi2_pins_uhs>;
! 618: pinctrl-names = "default", "state_uhs";
! 619:
! 620: vmmc-supply = <&vcc_sdhi2>;
! 621: vqmmc-supply = <&vccq_sdhi2>;
! 622: cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
! 623: sd-uhs-sdr50;
! 624: status = "okay";
! 625: };
! 626:
! 627: &cpu0 {
! 628: cpu0-supply = <&vdd_dvfs>;
! 629: };
! 630:
! 631: &i2c0 {
! 632: pinctrl-0 = <&i2c0_pins>;
! 633: pinctrl-names = "i2c-exio0";
! 634: };
! 635:
! 636: &iic0 {
! 637: pinctrl-0 = <&iic0_pins>;
! 638: pinctrl-names = "i2c-exio0";
! 639: };
! 640:
! 641: &i2c1 {
! 642: pinctrl-0 = <&i2c1_pins>;
! 643: pinctrl-names = "i2c-exio1";
! 644: };
! 645:
! 646: &iic1 {
! 647: pinctrl-0 = <&iic1_pins>;
! 648: pinctrl-names = "i2c-exio1";
! 649: };
! 650:
! 651: &iic2 {
! 652: status = "okay";
! 653: pinctrl-0 = <&iic2_pins>;
! 654: pinctrl-names = "default";
! 655:
! 656: clock-frequency = <100000>;
! 657:
! 658: ak4643: codec@12 {
! 659: compatible = "asahi-kasei,ak4643";
! 660: #sound-dai-cells = <0>;
! 661: reg = <0x12>;
! 662: };
! 663:
! 664: composite-in@20 {
! 665: compatible = "adi,adv7180";
! 666: reg = <0x20>;
! 667: remote = <&vin1>;
! 668:
! 669: port {
! 670: adv7180: endpoint {
! 671: bus-width = <8>;
! 672: remote-endpoint = <&vin1ep0>;
! 673: };
! 674: };
! 675: };
! 676:
! 677: hdmi@39 {
! 678: compatible = "adi,adv7511w";
! 679: reg = <0x39>;
! 680: interrupt-parent = <&gpio1>;
! 681: interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
! 682:
! 683: adi,input-depth = <8>;
! 684: adi,input-colorspace = "rgb";
! 685: adi,input-clock = "1x";
! 686: adi,input-style = <1>;
! 687: adi,input-justification = "evenly";
! 688:
! 689: ports {
! 690: #address-cells = <1>;
! 691: #size-cells = <0>;
! 692:
! 693: port@0 {
! 694: reg = <0>;
! 695: adv7511_in: endpoint {
! 696: remote-endpoint = <&du_out_lvds0>;
! 697: };
! 698: };
! 699:
! 700: port@1 {
! 701: reg = <1>;
! 702: adv7511_out: endpoint {
! 703: remote-endpoint = <&hdmi_con_out>;
! 704: };
! 705: };
! 706: };
! 707: };
! 708:
! 709: hdmi-in@4c {
! 710: compatible = "adi,adv7612";
! 711: reg = <0x4c>;
! 712: interrupt-parent = <&gpio1>;
! 713: interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
! 714: default-input = <0>;
! 715:
! 716: ports {
! 717: #address-cells = <1>;
! 718: #size-cells = <0>;
! 719:
! 720: port@0 {
! 721: reg = <0>;
! 722: adv7612_in: endpoint {
! 723: remote-endpoint = <&hdmi_con_in>;
! 724: };
! 725: };
! 726:
! 727: port@2 {
! 728: reg = <2>;
! 729: adv7612_out: endpoint {
! 730: remote-endpoint = <&vin0ep2>;
! 731: };
! 732: };
! 733: };
! 734: };
! 735: };
! 736:
! 737: &iic3 {
! 738: pinctrl-names = "default";
! 739: pinctrl-0 = <&iic3_pins>;
! 740: status = "okay";
! 741:
! 742: pmic@58 {
! 743: compatible = "dlg,da9063";
! 744: reg = <0x58>;
! 745: interrupt-parent = <&irqc0>;
! 746: interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
! 747: interrupt-controller;
! 748:
! 749: rtc {
! 750: compatible = "dlg,da9063-rtc";
! 751: };
! 752:
! 753: wdt {
! 754: compatible = "dlg,da9063-watchdog";
! 755: };
! 756: };
! 757:
! 758: vdd_dvfs: regulator@68 {
! 759: compatible = "dlg,da9210";
! 760: reg = <0x68>;
! 761: interrupt-parent = <&irqc0>;
! 762: interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
! 763:
! 764: regulator-min-microvolt = <1000000>;
! 765: regulator-max-microvolt = <1000000>;
! 766: regulator-boot-on;
! 767: regulator-always-on;
! 768: };
! 769: };
! 770:
! 771: &pci0 {
! 772: status = "okay";
! 773: pinctrl-0 = <&usb0_pins>;
! 774: pinctrl-names = "default";
! 775: };
! 776:
! 777: &pci1 {
! 778: status = "okay";
! 779: pinctrl-0 = <&usb1_pins>;
! 780: pinctrl-names = "default";
! 781: };
! 782:
! 783: &xhci {
! 784: status = "okay";
! 785: pinctrl-0 = <&usb2_pins>;
! 786: pinctrl-names = "default";
! 787: };
! 788:
! 789: &pci2 {
! 790: status = "okay";
! 791: pinctrl-0 = <&usb2_pins>;
! 792: pinctrl-names = "default";
! 793: };
! 794:
! 795: &hsusb {
! 796: status = "okay";
! 797: pinctrl-0 = <&hsusb_pins>;
! 798: pinctrl-names = "default";
! 799: renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
! 800: };
! 801:
! 802: &usbphy {
! 803: status = "okay";
! 804: };
! 805:
! 806: /* HDMI video input */
! 807: &vin0 {
! 808: pinctrl-0 = <&vin0_pins>;
! 809: pinctrl-names = "default";
! 810:
! 811: status = "okay";
! 812:
! 813: port {
! 814: vin0ep2: endpoint {
! 815: remote-endpoint = <&adv7612_out>;
! 816: bus-width = <24>;
! 817: hsync-active = <0>;
! 818: vsync-active = <0>;
! 819: pclk-sample = <1>;
! 820: data-active = <1>;
! 821: };
! 822: };
! 823: };
! 824:
! 825: /* composite video input */
! 826: &vin1 {
! 827: pinctrl-0 = <&vin1_pins>;
! 828: pinctrl-names = "default";
! 829:
! 830: status = "okay";
! 831:
! 832: port {
! 833: #address-cells = <1>;
! 834: #size-cells = <0>;
! 835:
! 836: vin1ep0: endpoint {
! 837: remote-endpoint = <&adv7180>;
! 838: bus-width = <8>;
! 839: };
! 840: };
! 841: };
! 842:
! 843: &rcar_sound {
! 844: pinctrl-0 = <&sound_pins &sound_clk_pins>;
! 845: pinctrl-names = "default";
! 846:
! 847: /* Single DAI */
! 848: #sound-dai-cells = <0>;
! 849:
! 850: status = "okay";
! 851:
! 852: rcar_sound,dai {
! 853: dai0 {
! 854: playback = <&ssi0 &src2 &dvc0>;
! 855: capture = <&ssi1 &src3 &dvc1>;
! 856: };
! 857: };
! 858: };
! 859:
! 860: &ssi1 {
! 861: shared-pin;
! 862: };
CVSweb <webmaster@jp.NetBSD.org>