Annotation of src/sys/external/gpl2/dts/dist/arch/arm/boot/dts/berlin2q.dtsi, Revision 1.1.1.1.4.2
1.1.1.1.4.2! snj 1: /*
! 2: * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
! 3: *
! 4: * This file is dual-licensed: you can use it either under the terms
! 5: * of the GPL or the X11 license, at your option. Note that this dual
! 6: * licensing only applies to this file, and not this project as a
! 7: * whole.
! 8: *
! 9: * a) This file is licensed under the terms of the GNU General Public
! 10: * License version 2. This program is licensed "as is" without any
! 11: * warranty of any kind, whether express or implied.
! 12: *
! 13: * Or, alternatively,
! 14: *
! 15: * b) Permission is hereby granted, free of charge, to any person
! 16: * obtaining a copy of this software and associated documentation
! 17: * files (the "Software"), to deal in the Software without
! 18: * restriction, including without limitation the rights to use,
! 19: * copy, modify, merge, publish, distribute, sublicense, and/or
! 20: * sell copies of the Software, and to permit persons to whom the
! 21: * Software is furnished to do so, subject to the following
! 22: * conditions:
! 23: *
! 24: * The above copyright notice and this permission notice shall be
! 25: * included in all copies or substantial portions of the Software.
! 26: *
! 27: * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
! 28: * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
! 29: * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
! 30: * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
! 31: * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
! 32: * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
! 33: * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
! 34: * OTHER DEALINGS IN THE SOFTWARE.
! 35: */
! 36:
! 37: #include <dt-bindings/clock/berlin2q.h>
! 38: #include <dt-bindings/interrupt-controller/arm-gic.h>
! 39:
! 40: / {
! 41: model = "Marvell Armada 1500 pro (BG2-Q) SoC";
! 42: compatible = "marvell,berlin2q", "marvell,berlin";
! 43: #address-cells = <1>;
! 44: #size-cells = <1>;
! 45:
! 46: aliases {
! 47: serial0 = &uart0;
! 48: serial1 = &uart1;
! 49: };
! 50:
! 51: cpus {
! 52: #address-cells = <1>;
! 53: #size-cells = <0>;
! 54: enable-method = "marvell,berlin-smp";
! 55:
! 56: cpu@0 {
! 57: compatible = "arm,cortex-a9";
! 58: device_type = "cpu";
! 59: next-level-cache = <&l2>;
! 60: reg = <0>;
! 61:
! 62: clocks = <&chip_clk CLKID_CPU>;
! 63: clock-latency = <100000>;
! 64: /* Can be modified by the bootloader */
! 65: operating-points = <
! 66: /* kHz uV */
! 67: 1200000 1200000
! 68: 1000000 1200000
! 69: 800000 1200000
! 70: 600000 1200000
! 71: >;
! 72: };
! 73:
! 74: cpu@1 {
! 75: compatible = "arm,cortex-a9";
! 76: device_type = "cpu";
! 77: next-level-cache = <&l2>;
! 78: reg = <1>;
! 79: };
! 80:
! 81: cpu@2 {
! 82: compatible = "arm,cortex-a9";
! 83: device_type = "cpu";
! 84: next-level-cache = <&l2>;
! 85: reg = <2>;
! 86: };
! 87:
! 88: cpu@3 {
! 89: compatible = "arm,cortex-a9";
! 90: device_type = "cpu";
! 91: next-level-cache = <&l2>;
! 92: reg = <3>;
! 93: };
! 94: };
! 95:
! 96: refclk: oscillator {
! 97: compatible = "fixed-clock";
! 98: #clock-cells = <0>;
! 99: clock-frequency = <25000000>;
! 100: };
! 101:
! 102: soc@f7000000 {
! 103: compatible = "simple-bus";
! 104: #address-cells = <1>;
! 105: #size-cells = <1>;
! 106:
! 107: ranges = <0 0xf7000000 0x1000000>;
! 108: interrupt-parent = <&gic>;
! 109:
! 110: pmu {
! 111: compatible = "arm,cortex-a9-pmu";
! 112: interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
! 113: <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
! 114: <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
! 115: <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
! 116: };
! 117:
! 118: sdhci0: sdhci@ab0000 {
! 119: compatible = "mrvl,pxav3-mmc";
! 120: reg = <0xab0000 0x200>;
! 121: clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
! 122: clock-names = "io", "core";
! 123: interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
! 124: status = "disabled";
! 125: };
! 126:
! 127: sdhci1: sdhci@ab0800 {
! 128: compatible = "mrvl,pxav3-mmc";
! 129: reg = <0xab0800 0x200>;
! 130: clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
! 131: clock-names = "io", "core";
! 132: interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
! 133: status = "disabled";
! 134: };
! 135:
! 136: sdhci2: sdhci@ab1000 {
! 137: compatible = "mrvl,pxav3-mmc";
! 138: reg = <0xab1000 0x200>;
! 139: interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
! 140: clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_SDIO>;
! 141: clock-names = "io", "core";
! 142: status = "disabled";
! 143: };
! 144:
! 145: l2: l2-cache-controller@ac0000 {
! 146: compatible = "arm,pl310-cache";
! 147: reg = <0xac0000 0x1000>;
! 148: cache-level = <2>;
! 149: arm,data-latency = <2 2 2>;
! 150: arm,tag-latency = <2 2 2>;
! 151: };
! 152:
! 153: scu: snoop-control-unit@ad0000 {
! 154: compatible = "arm,cortex-a9-scu";
! 155: reg = <0xad0000 0x58>;
! 156: };
! 157:
! 158: local-timer@ad0600 {
! 159: compatible = "arm,cortex-a9-twd-timer";
! 160: reg = <0xad0600 0x20>;
! 161: clocks = <&chip_clk CLKID_TWD>;
! 162: interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
! 163: };
! 164:
! 165: gic: interrupt-controller@ad1000 {
! 166: compatible = "arm,cortex-a9-gic";
! 167: reg = <0xad1000 0x1000>, <0xad0100 0x100>;
! 168: interrupt-controller;
! 169: #interrupt-cells = <3>;
! 170: };
! 171:
! 172: usb_phy2: phy@a2f400 {
! 173: compatible = "marvell,berlin2cd-usb-phy";
! 174: reg = <0xa2f400 0x128>;
! 175: #phy-cells = <0>;
! 176: resets = <&chip_rst 0x104 14>;
! 177: status = "disabled";
! 178: };
! 179:
! 180: usb2: usb@a30000 {
! 181: compatible = "chipidea,usb2";
! 182: reg = <0xa30000 0x10000>;
! 183: interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
! 184: clocks = <&chip_clk CLKID_USB2>;
! 185: phys = <&usb_phy2>;
! 186: phy-names = "usb-phy";
! 187: status = "disabled";
! 188: };
! 189:
! 190: usb_phy0: phy@b74000 {
! 191: compatible = "marvell,berlin2cd-usb-phy";
! 192: reg = <0xb74000 0x128>;
! 193: #phy-cells = <0>;
! 194: resets = <&chip_rst 0x104 12>;
! 195: status = "disabled";
! 196: };
! 197:
! 198: usb_phy1: phy@b78000 {
! 199: compatible = "marvell,berlin2cd-usb-phy";
! 200: reg = <0xb78000 0x128>;
! 201: #phy-cells = <0>;
! 202: resets = <&chip_rst 0x104 13>;
! 203: status = "disabled";
! 204: };
! 205:
! 206: eth0: ethernet@b90000 {
! 207: compatible = "marvell,pxa168-eth";
! 208: reg = <0xb90000 0x10000>;
! 209: clocks = <&chip_clk CLKID_GETH0>;
! 210: interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
! 211: /* set by bootloader */
! 212: local-mac-address = [00 00 00 00 00 00];
! 213: #address-cells = <1>;
! 214: #size-cells = <0>;
! 215: phy-connection-type = "mii";
! 216: phy-handle = <ðphy0>;
! 217: status = "disabled";
! 218:
! 219: ethphy0: ethernet-phy@0 {
! 220: reg = <0>;
! 221: };
! 222: };
! 223:
! 224: cpu-ctrl@dd0000 {
! 225: compatible = "marvell,berlin-cpu-ctrl";
! 226: reg = <0xdd0000 0x10000>;
! 227: };
! 228:
! 229: apb@e80000 {
! 230: compatible = "simple-bus";
! 231: #address-cells = <1>;
! 232: #size-cells = <1>;
! 233:
! 234: ranges = <0 0xe80000 0x10000>;
! 235: interrupt-parent = <&aic>;
! 236:
! 237: gpio0: gpio@0400 {
! 238: compatible = "snps,dw-apb-gpio";
! 239: reg = <0x0400 0x400>;
! 240: #address-cells = <1>;
! 241: #size-cells = <0>;
! 242:
! 243: porta: gpio-port@0 {
! 244: compatible = "snps,dw-apb-gpio-port";
! 245: gpio-controller;
! 246: #gpio-cells = <2>;
! 247: snps,nr-gpios = <32>;
! 248: reg = <0>;
! 249: interrupt-controller;
! 250: #interrupt-cells = <2>;
! 251: interrupts = <0>;
! 252: };
! 253: };
! 254:
! 255: gpio1: gpio@0800 {
! 256: compatible = "snps,dw-apb-gpio";
! 257: reg = <0x0800 0x400>;
! 258: #address-cells = <1>;
! 259: #size-cells = <0>;
! 260:
! 261: portb: gpio-port@1 {
! 262: compatible = "snps,dw-apb-gpio-port";
! 263: gpio-controller;
! 264: #gpio-cells = <2>;
! 265: snps,nr-gpios = <32>;
! 266: reg = <0>;
! 267: interrupt-controller;
! 268: #interrupt-cells = <2>;
! 269: interrupts = <1>;
! 270: };
! 271: };
! 272:
! 273: gpio2: gpio@0c00 {
! 274: compatible = "snps,dw-apb-gpio";
! 275: reg = <0x0c00 0x400>;
! 276: #address-cells = <1>;
! 277: #size-cells = <0>;
! 278:
! 279: portc: gpio-port@2 {
! 280: compatible = "snps,dw-apb-gpio-port";
! 281: gpio-controller;
! 282: #gpio-cells = <2>;
! 283: snps,nr-gpios = <32>;
! 284: reg = <0>;
! 285: interrupt-controller;
! 286: #interrupt-cells = <2>;
! 287: interrupts = <2>;
! 288: };
! 289: };
! 290:
! 291: gpio3: gpio@1000 {
! 292: compatible = "snps,dw-apb-gpio";
! 293: reg = <0x1000 0x400>;
! 294: #address-cells = <1>;
! 295: #size-cells = <0>;
! 296:
! 297: portd: gpio-port@3 {
! 298: compatible = "snps,dw-apb-gpio-port";
! 299: gpio-controller;
! 300: #gpio-cells = <2>;
! 301: snps,nr-gpios = <32>;
! 302: reg = <0>;
! 303: interrupt-controller;
! 304: #interrupt-cells = <2>;
! 305: interrupts = <3>;
! 306: };
! 307: };
! 308:
! 309: i2c0: i2c@1400 {
! 310: compatible = "snps,designware-i2c";
! 311: #address-cells = <1>;
! 312: #size-cells = <0>;
! 313: reg = <0x1400 0x100>;
! 314: interrupts = <4>;
! 315: clocks = <&chip_clk CLKID_CFG>;
! 316: pinctrl-0 = <&twsi0_pmux>;
! 317: pinctrl-names = "default";
! 318: status = "disabled";
! 319: };
! 320:
! 321: i2c1: i2c@1800 {
! 322: compatible = "snps,designware-i2c";
! 323: #address-cells = <1>;
! 324: #size-cells = <0>;
! 325: reg = <0x1800 0x100>;
! 326: interrupts = <5>;
! 327: clocks = <&chip_clk CLKID_CFG>;
! 328: pinctrl-0 = <&twsi1_pmux>;
! 329: pinctrl-names = "default";
! 330: status = "disabled";
! 331: };
! 332:
! 333: timer0: timer@2c00 {
! 334: compatible = "snps,dw-apb-timer";
! 335: reg = <0x2c00 0x14>;
! 336: clocks = <&chip_clk CLKID_CFG>;
! 337: clock-names = "timer";
! 338: interrupts = <8>;
! 339: };
! 340:
! 341: timer1: timer@2c14 {
! 342: compatible = "snps,dw-apb-timer";
! 343: reg = <0x2c14 0x14>;
! 344: clocks = <&chip_clk CLKID_CFG>;
! 345: clock-names = "timer";
! 346: };
! 347:
! 348: timer2: timer@2c28 {
! 349: compatible = "snps,dw-apb-timer";
! 350: reg = <0x2c28 0x14>;
! 351: clocks = <&chip_clk CLKID_CFG>;
! 352: clock-names = "timer";
! 353: status = "disabled";
! 354: };
! 355:
! 356: timer3: timer@2c3c {
! 357: compatible = "snps,dw-apb-timer";
! 358: reg = <0x2c3c 0x14>;
! 359: clocks = <&chip_clk CLKID_CFG>;
! 360: clock-names = "timer";
! 361: status = "disabled";
! 362: };
! 363:
! 364: timer4: timer@2c50 {
! 365: compatible = "snps,dw-apb-timer";
! 366: reg = <0x2c50 0x14>;
! 367: clocks = <&chip_clk CLKID_CFG>;
! 368: clock-names = "timer";
! 369: status = "disabled";
! 370: };
! 371:
! 372: timer5: timer@2c64 {
! 373: compatible = "snps,dw-apb-timer";
! 374: reg = <0x2c64 0x14>;
! 375: clocks = <&chip_clk CLKID_CFG>;
! 376: clock-names = "timer";
! 377: status = "disabled";
! 378: };
! 379:
! 380: timer6: timer@2c78 {
! 381: compatible = "snps,dw-apb-timer";
! 382: reg = <0x2c78 0x14>;
! 383: clocks = <&chip_clk CLKID_CFG>;
! 384: clock-names = "timer";
! 385: status = "disabled";
! 386: };
! 387:
! 388: timer7: timer@2c8c {
! 389: compatible = "snps,dw-apb-timer";
! 390: reg = <0x2c8c 0x14>;
! 391: clocks = <&chip_clk CLKID_CFG>;
! 392: clock-names = "timer";
! 393: status = "disabled";
! 394: };
! 395:
! 396: aic: interrupt-controller@3800 {
! 397: compatible = "snps,dw-apb-ictl";
! 398: reg = <0x3800 0x30>;
! 399: interrupt-controller;
! 400: #interrupt-cells = <1>;
! 401: interrupt-parent = <&gic>;
! 402: interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
! 403: };
! 404: };
! 405:
! 406: chip: chip-control@ea0000 {
! 407: compatible = "simple-mfd", "syscon";
! 408: reg = <0xea0000 0x400>, <0xdd0170 0x10>;
! 409:
! 410: chip_clk: clock {
! 411: compatible = "marvell,berlin2q-clk";
! 412: #clock-cells = <1>;
! 413: clocks = <&refclk>;
! 414: clock-names = "refclk";
! 415: };
! 416:
! 417: soc_pinctrl: pin-controller {
! 418: compatible = "marvell,berlin2q-soc-pinctrl";
! 419:
! 420: sd1_pmux: sd1-pmux {
! 421: groups = "G31";
! 422: function = "sd1";
! 423: };
! 424:
! 425: twsi0_pmux: twsi0-pmux {
! 426: groups = "G6";
! 427: function = "twsi0";
! 428: };
! 429:
! 430: twsi1_pmux: twsi1-pmux {
! 431: groups = "G7";
! 432: function = "twsi1";
! 433: };
! 434: };
! 435:
! 436: chip_rst: reset {
! 437: compatible = "marvell,berlin2-reset";
! 438: #reset-cells = <2>;
! 439: };
! 440: };
! 441:
! 442: ahci: sata@e90000 {
! 443: compatible = "marvell,berlin2q-ahci", "generic-ahci";
! 444: reg = <0xe90000 0x1000>;
! 445: interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
! 446: clocks = <&chip_clk CLKID_SATA>;
! 447: #address-cells = <1>;
! 448: #size-cells = <0>;
! 449:
! 450: sata0: sata-port@0 {
! 451: reg = <0>;
! 452: phys = <&sata_phy 0>;
! 453: status = "disabled";
! 454: };
! 455:
! 456: sata1: sata-port@1 {
! 457: reg = <1>;
! 458: phys = <&sata_phy 1>;
! 459: status = "disabled";
! 460: };
! 461: };
! 462:
! 463: sata_phy: phy@e900a0 {
! 464: compatible = "marvell,berlin2q-sata-phy";
! 465: reg = <0xe900a0 0x200>;
! 466: clocks = <&chip_clk CLKID_SATA>;
! 467: #address-cells = <1>;
! 468: #size-cells = <0>;
! 469: #phy-cells = <1>;
! 470: status = "disabled";
! 471:
! 472: sata-phy@0 {
! 473: reg = <0>;
! 474: };
! 475:
! 476: sata-phy@1 {
! 477: reg = <1>;
! 478: };
! 479: };
! 480:
! 481: usb0: usb@ed0000 {
! 482: compatible = "chipidea,usb2";
! 483: reg = <0xed0000 0x10000>;
! 484: interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
! 485: clocks = <&chip_clk CLKID_USB0>;
! 486: phys = <&usb_phy0>;
! 487: phy-names = "usb-phy";
! 488: status = "disabled";
! 489: };
! 490:
! 491: usb1: usb@ee0000 {
! 492: compatible = "chipidea,usb2";
! 493: reg = <0xee0000 0x10000>;
! 494: interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
! 495: clocks = <&chip_clk CLKID_USB1>;
! 496: phys = <&usb_phy1>;
! 497: phy-names = "usb-phy";
! 498: status = "disabled";
! 499: };
! 500:
! 501: pwm: pwm@f20000 {
! 502: compatible = "marvell,berlin-pwm";
! 503: reg = <0xf20000 0x40>;
! 504: clocks = <&chip_clk CLKID_CFG>;
! 505: #pwm-cells = <3>;
! 506: };
! 507:
! 508: apb@fc0000 {
! 509: compatible = "simple-bus";
! 510: #address-cells = <1>;
! 511: #size-cells = <1>;
! 512:
! 513: ranges = <0 0xfc0000 0x10000>;
! 514: interrupt-parent = <&sic>;
! 515:
! 516: wdt0: watchdog@1000 {
! 517: compatible = "snps,dw-wdt";
! 518: reg = <0x1000 0x100>;
! 519: clocks = <&refclk>;
! 520: interrupts = <0>;
! 521: };
! 522:
! 523: wdt1: watchdog@2000 {
! 524: compatible = "snps,dw-wdt";
! 525: reg = <0x2000 0x100>;
! 526: clocks = <&refclk>;
! 527: interrupts = <1>;
! 528: };
! 529:
! 530: wdt2: watchdog@3000 {
! 531: compatible = "snps,dw-wdt";
! 532: reg = <0x3000 0x100>;
! 533: clocks = <&refclk>;
! 534: interrupts = <2>;
! 535: };
! 536:
! 537: sm_gpio1: gpio@5000 {
! 538: compatible = "snps,dw-apb-gpio";
! 539: reg = <0x5000 0x400>;
! 540: #address-cells = <1>;
! 541: #size-cells = <0>;
! 542:
! 543: portf: gpio-port@5 {
! 544: compatible = "snps,dw-apb-gpio-port";
! 545: gpio-controller;
! 546: #gpio-cells = <2>;
! 547: snps,nr-gpios = <32>;
! 548: reg = <0>;
! 549: };
! 550: };
! 551:
! 552: i2c2: i2c@7000 {
! 553: compatible = "snps,designware-i2c";
! 554: #address-cells = <1>;
! 555: #size-cells = <0>;
! 556: reg = <0x7000 0x100>;
! 557: interrupts = <6>;
! 558: clocks = <&refclk>;
! 559: pinctrl-0 = <&twsi2_pmux>;
! 560: pinctrl-names = "default";
! 561: status = "disabled";
! 562: };
! 563:
! 564: i2c3: i2c@8000 {
! 565: compatible = "snps,designware-i2c";
! 566: #address-cells = <1>;
! 567: #size-cells = <0>;
! 568: reg = <0x8000 0x100>;
! 569: interrupts = <7>;
! 570: clocks = <&refclk>;
! 571: pinctrl-0 = <&twsi3_pmux>;
! 572: pinctrl-names = "default";
! 573: status = "disabled";
! 574: };
! 575:
! 576: uart0: uart@9000 {
! 577: compatible = "snps,dw-apb-uart";
! 578: reg = <0x9000 0x100>;
! 579: interrupts = <8>;
! 580: clocks = <&refclk>;
! 581: reg-shift = <2>;
! 582: pinctrl-0 = <&uart0_pmux>;
! 583: pinctrl-names = "default";
! 584: status = "disabled";
! 585: };
! 586:
! 587: uart1: uart@a000 {
! 588: compatible = "snps,dw-apb-uart";
! 589: reg = <0xa000 0x100>;
! 590: interrupts = <9>;
! 591: clocks = <&refclk>;
! 592: reg-shift = <2>;
! 593: pinctrl-0 = <&uart1_pmux>;
! 594: pinctrl-names = "default";
! 595: status = "disabled";
! 596: };
! 597:
! 598: sm_gpio0: gpio@c000 {
! 599: compatible = "snps,dw-apb-gpio";
! 600: reg = <0xc000 0x400>;
! 601: #address-cells = <1>;
! 602: #size-cells = <0>;
! 603:
! 604: porte: gpio-port@4 {
! 605: compatible = "snps,dw-apb-gpio-port";
! 606: gpio-controller;
! 607: #gpio-cells = <2>;
! 608: snps,nr-gpios = <32>;
! 609: reg = <0>;
! 610: };
! 611: };
! 612:
! 613: sysctrl: pin-controller@d000 {
! 614: compatible = "simple-mfd", "syscon";
! 615: reg = <0xd000 0x100>;
! 616:
! 617: sys_pinctrl: pin-controller {
! 618: compatible = "marvell,berlin2q-system-pinctrl";
! 619:
! 620: uart0_pmux: uart0-pmux {
! 621: groups = "GSM12";
! 622: function = "uart0";
! 623: };
! 624:
! 625: uart1_pmux: uart1-pmux {
! 626: groups = "GSM14";
! 627: function = "uart1";
! 628: };
! 629:
! 630: twsi2_pmux: twsi2-pmux {
! 631: groups = "GSM13";
! 632: function = "twsi2";
! 633: };
! 634:
! 635: twsi3_pmux: twsi3-pmux {
! 636: groups = "GSM14";
! 637: function = "twsi3";
! 638: };
! 639: };
! 640:
! 641: adc: adc {
! 642: compatible = "marvell,berlin2-adc";
! 643: interrupts = <12>, <14>;
! 644: interrupt-names = "adc", "tsen";
! 645: };
! 646: };
! 647:
! 648: sic: interrupt-controller@e000 {
! 649: compatible = "snps,dw-apb-ictl";
! 650: reg = <0xe000 0x30>;
! 651: interrupt-controller;
! 652: #interrupt-cells = <1>;
! 653: interrupt-parent = <&gic>;
! 654: interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
! 655: };
! 656: };
! 657: };
! 658: };
CVSweb <webmaster@jp.NetBSD.org>