![[BACK]](/icons/back.gif){kind=icon}
Return to bcm958625hr.dts CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [cvs.NetBSD.org] / src / sys / external / gpl2 / dts / dist / arch / arm / boot / dts|
Return to bcm958625hr.dts CVS log | Up to [cvs.NetBSD.org] / src / sys / external / gpl2 / dts / dist / arch / arm / boot / dts |
1.1 jmcneill 1: /*
2: * BSD LICENSE
3: *
4: * Copyright(c) 2016 Broadcom. All rights reserved.
5: *
6: * Redistribution and use in source and binary forms, with or without
7: * modification, are permitted provided that the following conditions
8: * are met:
9: *
10: * * Redistributions of source code must retain the above copyright
11: * notice, this list of conditions and the following disclaimer.
12: * * Redistributions in binary form must reproduce the above copyright
13: * notice, this list of conditions and the following disclaimer in
14: * the documentation and/or other materials provided with the
15: * distribution.
16: * * Neither the name of Broadcom Corporation nor the names of its
17: * contributors may be used to endorse or promote products derived
18: * from this software without specific prior written permission.
19: *
20: * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21: * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22: * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23: * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24: * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25: * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26: * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27: * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28: * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29: * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30: * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31: */
32:
33: /dts-v1/;
34:
35: #include "bcm-nsp.dtsi"
36: #include <dt-bindings/gpio/gpio.h>
37:
38: / {
39: model = "NorthStar Plus SVK (BCM958625HR)";
40: compatible = "brcm,bcm58625", "brcm,nsp";
41:
42: aliases {
43: serial0 = &uart0;
44: };
45:
46: chosen {
47: stdout-path = "serial0:115200n8";
48: };
49:
50: memory {
51: device_type = "memory";
1.1.1.3.4.1! pgoyette 52: reg = <0x60000000 0x20000000>;
1.1 jmcneill 53: };
54:
55: gpio-restart {
56: compatible = "gpio-restart";
57: gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
58: open-source;
59: priority = <200>;
60: };
61: };
62:
63: &amac0 {
64: status = "okay";
65: };
66:
67: &amac1 {
68: status = "okay";
69: };
70:
71: &amac2 {
72: status = "okay";
73: };
74:
1.1.1.2 jmcneill 75: &ehci0 {
76: status = "okay";
77: };
78:
1.1 jmcneill 79: &nand {
80: nandcs@0 {
81: compatible = "brcm,nandcs";
82: reg = <0>;
83: nand-on-flash-bbt;
84:
85: #address-cells = <1>;
86: #size-cells = <1>;
87:
88: nand-ecc-strength = <24>;
89: nand-ecc-step-size = <1024>;
90:
91: brcm,nand-oob-sector-size = <27>;
92:
93: partition@0 {
94: label = "nboot";
95: reg = <0x00000000 0x00200000>;
96: read-only;
97: };
98: partition@200000 {
99: label = "nenv";
100: reg = <0x00200000 0x00400000>;
101: };
102: partition@600000 {
103: label = "nsystem";
104: reg = <0x00600000 0x00a00000>;
105: };
106: partition@1000000 {
107: label = "nrootfs";
108: reg = <0x01000000 0x03000000>;
109: };
110: partition@4000000 {
111: label = "ncustfs";
112: reg = <0x04000000 0x3c000000>;
113: };
114: };
115: };
116:
1.1.1.2 jmcneill 117: &ohci0 {
118: status = "okay";
119: };
120:
1.1 jmcneill 121: &pcie0 {
122: status = "okay";
123: };
124:
125: &pcie1 {
126: status = "okay";
127: };
128:
129: &pinctrl {
130: pinctrl-names = "default";
131: pinctrl-0 = <&nand_sel>;
132: nand_sel: nand_sel {
133: function = "nand";
134: groups = "nand_grp";
135: };
136: };
137:
138: &qspi {
139: bspi-sel = <0>;
140: flash: m25p80@0 {
141: #address-cells = <1>;
142: #size-cells = <1>;
143: compatible = "m25p80";
144: reg = <0x0>;
145: spi-max-frequency = <12500000>;
146: m25p,fast-read;
147: spi-cpol;
148: spi-cpha;
149:
150: partition@0 {
151: label = "boot";
152: reg = <0x00000000 0x000a0000>;
153: };
154:
155: partition@a0000 {
156: label = "env";
157: reg = <0x000a0000 0x00060000>;
158: };
159:
160: partition@100000 {
161: label = "system";
162: reg = <0x00100000 0x00600000>;
163: };
164:
165: partition@700000 {
166: label = "rootfs";
167: reg = <0x00700000 0x01900000>;
168: };
169: };
170: };
171:
172: &sata_phy0 {
173: status = "okay";
174: };
175:
176: &sata_phy1 {
177: status = "okay";
178: };
179:
180: &srab {
181: compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
182: status = "okay";
183:
184: ports {
185: #address-cells = <1>;
186: #size-cells = <0>;
187:
188: port@0 {
189: label = "port0";
190: reg = <0>;
191: };
192:
193: port@1 {
194: label = "port1";
195: reg = <1>;
196: };
197:
198: port@2 {
199: label = "port2";
200: reg = <2>;
201: };
202:
203: port@3 {
204: label = "port3";
205: reg = <3>;
206: };
207:
208: port@4 {
209: label = "port4";
210: reg = <4>;
211: };
212:
1.1.1.3.4.1! pgoyette 213: port@8 {
! 214: ethernet = <&amac2>;
1.1 jmcneill 215: label = "cpu";
1.1.1.3.4.1! pgoyette 216: reg = <8>;
1.1 jmcneill 217: fixed-link {
218: speed = <1000>;
219: full-duplex;
220: };
221: };
222: };
223: };
224:
225: &uart0 {
226: status = "okay";
227: };
1.1.1.3 jmcneill 228:
229: &usb3_phy {
230: status = "okay";
231: };
232:
233: &xhci {
234: status = "okay";
235: };