Annotation of src/sys/external/gpl2/dts/dist/arch/arm/boot/dts/at91-cosino_mega2560.dts, Revision 1.1.1.2.2.2
1.1.1.2.2.2! jdolecek 1: /*
! 2: * at91-cosino_mega2560.dts - Device Tree file for Cosino board with
! 3: * Mega 2560 extension
! 4: *
! 5: * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
! 6: * HCE Engineering
! 7: *
! 8: * Derived from at91sam9g35ek.dts by:
! 9: * Copyright (C) 2012 Atmel,
! 10: * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
! 11: *
! 12: * Licensed under GPLv2 or later.
! 13: */
! 14:
! 15: /dts-v1/;
! 16: #include "at91-cosino.dtsi"
! 17:
! 18: / {
! 19: model = "HCE Cosino Mega 2560";
! 20: compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
! 21:
! 22: ahb {
! 23: apb {
! 24: macb0: ethernet@f802c000 {
! 25: phy-mode = "rmii";
! 26: status = "okay";
! 27: };
! 28:
! 29: adc0: adc@f804c000 {
! 30: atmel,adc-ts-wires = <4>;
! 31: atmel,adc-ts-pressure-threshold = <10000>;
! 32: status = "okay";
! 33: };
! 34:
! 35: rtc@fffffeb0 {
! 36: status = "okay";
! 37: };
! 38:
! 39: usart1: serial@f8020000 {
! 40: status = "okay";
! 41: };
! 42:
! 43: usart2: serial@f8024000 {
! 44: status = "okay";
! 45: };
! 46:
! 47: usb2: gadget@f803c000 {
! 48: atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
! 49: status = "okay";
! 50: };
! 51:
! 52: mmc1: mmc@f000c000 {
! 53: pinctrl-0 = <
! 54: &pinctrl_mmc1_slot0_clk_cmd_dat0
! 55: &pinctrl_mmc1_slot0_dat1_3>;
! 56: status = "okay";
! 57: slot@0 {
! 58: reg = <0>;
! 59: bus-width = <4>;
! 60: non-removable;
! 61: };
! 62: };
! 63: };
! 64:
! 65: usb0: ohci@600000 {
! 66: status = "okay";
! 67: num-ports = <3>;
! 68: atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
! 69: &pioD 19 GPIO_ACTIVE_LOW
! 70: &pioD 20 GPIO_ACTIVE_LOW
! 71: >;
! 72: };
! 73:
! 74: usb1: ehci@700000 {
! 75: status = "okay";
! 76: };
! 77: };
! 78: };
CVSweb <webmaster@jp.NetBSD.org>