[BACK]Return to at91-cosino.dtsi CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src / sys / external / gpl2 / dts / dist / arch / arm / boot / dts

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/sys/external/gpl2/dts/dist/arch/arm/boot/dts/at91-cosino.dtsi between version 1.1.1.1.6.1 and 1.1.1.1.6.2

version 1.1.1.1.6.1, 2017/06/15 20:14:23 version 1.1.1.1.6.2, 2017/08/28 17:52:36
Line 0 
Line 1 
   /*
    * at91-cosino.dtsi - Device Tree file for Cosino core module
    *
    * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
    *                      HCE Engineering
    *
    * Derived from at91sam9x5ek.dtsi by:
    *      Copyright (C) 2012 Atmel,
    *      2012 Nicolas Ferre <nicolas.ferre@atmel.com>
    *
    * Licensed under GPLv2 or later.
    */
   
   #include "at91sam9g35.dtsi"
   
   / {
           model = "HCE Cosino core module";
           compatible = "hce,cosino", "atmel,at91sam9x5", "atmel,at91sam9";
   
           chosen {
                   bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait";
           };
   
           memory {
                   reg = <0x20000000 0x8000000>;
           };
   
           clocks {
                   slow_xtal {
                           clock-frequency = <32768>;
                   };
   
                   main_xtal {
                           clock-frequency = <12000000>;
                   };
           };
   
           ahb {
                   apb {
                           mmc0: mmc@f0008000 {
                                   pinctrl-0 = <
                                           &pinctrl_board_mmc0
                                           &pinctrl_mmc0_slot0_clk_cmd_dat0
                                           &pinctrl_mmc0_slot0_dat1_3>;
                                   status = "okay";
                                   slot@0 {
                                           reg = <0>;
                                           bus-width = <4>;
                                           cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
                                   };
                           };
   
                           dbgu: serial@fffff200 {
                                   status = "okay";
                           };
   
                           usart0: serial@f801c000 {
                                   status = "okay";
                           };
   
                           i2c0: i2c@f8010000 {
                                   status = "okay";
                           };
   
                           adc0: adc@f804c000 {
                                   atmel,adc-ts-wires = <4>;
                                   atmel,adc-ts-pressure-threshold = <10000>;
                                   status = "okay";
                           };
   
                           pinctrl@fffff400 {
                                   mmc0 {
                                           pinctrl_board_mmc0: mmc0-board {
                                                   atmel,pins =
                                                           <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;  /* PD15 gpio CD pin pull up and deglitch */
                                           };
                                   };
                           };
   
                           watchdog@fffffe40 {
                                   status = "okay";
                           };
                   };
   
                   nand0: nand@40000000 {
                           nand-bus-width = <8>;
                           nand-ecc-mode = "hw";
                           atmel,has-pmecc;        /* Enable PMECC */
                           atmel,pmecc-cap = <4>;
                           atmel,pmecc-sector-size = <512>;
                           nand-on-flash-bbt;
                           status = "okay";
   
                           at91bootstrap@0 {
                                   label = "at91bootstrap";
                                   reg = <0x0 0x40000>;
                           };
   
                           uboot@40000 {
                                   label = "u-boot";
                                   reg = <0x40000 0x80000>;
                           };
   
                           ubootenv@c0000 {
                                   label = "U-Boot Env";
                                   reg = <0xc0000 0x140000>;
                           };
   
                           kernel@200000 {
                                   label = "kernel";
                                   reg = <0x200000 0x600000>;
                           };
   
                           rootfs@800000 {
                                   label = "rootfs";
                                   reg = <0x800000 0x0f800000>;
                           };
                   };
           };
   };

Legend:
Removed from v.1.1.1.1.6.1  
changed lines
  Added in v.1.1.1.1.6.2

CVSweb <webmaster@jp.NetBSD.org>