CVS log for src/sys/dev/wscons/wsemul_vt100.c

Up to [cvs.NetBSD.org] / src / sys / dev / wscons

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

Pull up following revision(s) (requested by gutteridge in ticket #1772):

	sys/dev/wscons/wsemul_vt100.c: revision 1.47
	sys/dev/wscons/wsemul_vt100.c: revision 1.48

PR/56223: David Shao ^[]8;;^G make console unresponsive. From OpenBSD:

In `string' state, accept bell (^G) as an end of sequence in addition to
`ESC \', as supported by xterm; some third-party software such as
ncmpcpp rely upon this.

fix the NetBSD tag.

wsemul_vt100: fix RI to not scroll outside of scroll region

This is the inverse (scroll down) of the problem reported and fixed
for IND (scroll up) in PR kern/11827 back in 2000.

We only have one call site for this, but still move this bit of code
into a separate wsemul_vt100_prevline function to make it symmetric
with wsemul_vt100_nextline.  While here, make both take vt100base_data.

Pull up following revision(s) (requested by uwe in ticket #257):
	sys/dev/wscons/wsemul_vt100_subr.c: revision 1.25
	sys/dev/wscons/wsemul_vt100_subr.c: revision 1.26
	sys/dev/wscons/wsemul_vt100_subr.c: revision 1.27
	sys/dev/wscons/wsemul_vt100_subr.c: revision 1.28
	sys/dev/wscons/wsemul_vt100_subr.c: revision 1.29
	sys/dev/wscons/wsemul_vt100.c: revision 1.50
	sys/dev/wscons/wsemul_vt100.c: revision 1.51
	sys/dev/wscons/wsemul_vt100_subr.c: revision 1.30
	sys/dev/wscons/wsemul_vt100_subr.c: revision 1.31

Fix off by one (Crystal Kolipe in tech-kern@)

Add rin, indn, vpa, hpa, and cbt terminfo capabilities (Crystal Kolipe)

wscons(4): Ignore nonsense tab stops in vt100 emulation.

wscons(4): Paranoia: Clamp numbers of rows and columns.

wsemul_vt100_subr: don't assert unsigned ncols >= 0

wsemul_vt100_subr: spell edp->tabs assertion with NULL

Avoid overflow with too many ';' (David Leadbeater)

Prefix all messages with the method name

wsemul_vt100_subr: complete the refactoring from 2010
In 1.20 refactoring, functions in this file were changed to accept a
pointer to the new base class instead of the full emuldata:
  -wsemul_vt100_foo(struct wsemul_vt100_emuldata *edp, ...)
  +wsemul_vt100_foo(struct vt100base_data *edp, ...)
but the argument name was not changed.  While this saved on the diff
churn back then, it created a rather unfortunate situation where the
same emulation state variables are referred to differently in this
file and other vt100 emulation files.  Complete that old change by
renaming the base class arguments to match the variable name used for
it in other files.

Same object code is generated.

Avoid overflow with too many ';' (David Leadbeater)
Prefix all messages with the method name

wscons(4): Paranoia: Clamp numbers of rows and columns.

wsemul_vt100.c - make static everything that can be static

Externally, wsdisplay only needs wsemul_vt100_ops.  Internally (as
vt100 emulation is split into several files) wsemul_vt100_subr.c needs
wsemul_vt100_reset().

Sync w/ HEAD.

fix the NetBSD tag.

PR/56223: David Shao ^[]8;;^G make console unresponsive. From OpenBSD:
In `string' state, accept bell (^G) as an end of sequence in addition to
`ESC \', as supported by xterm; some third-party software such as
ncmpcpp rely upon this.

Mostly merge changes from HEAD upto 20200411

in many device attach paths, allocate memory with M_WAITOK instead of M_NOWAIT
and remove code to handle failures that can no longer happen.

Sync with HEAD

Sync with HEAD

Resolve a couple of conflicts (result of the uimin/uimax changes)

Rename min/max -> uimin/uimax for better honesty.

These functions are defined on unsigned int.  The generic name
min/max should not silently truncate to 32 bits on 64-bit systems.
This is purely a name change -- no functional change intended.

HOWEVER!  Some subsystems have

	#define min(a, b)	((a) < (b) ? (a) : (b))
	#define max(a, b)	((a) > (b) ? (a) : (b))

even though our standard name for that is MIN/MAX.  Although these
may invite multiple evaluation bugs, these do _not_ cause integer
truncation.

To avoid `fixing' these cases, I first changed the name in libkern,
and then compile-tested every file where min/max occurred in order to
confirm that it failed -- and thus confirm that nothing shadowed
min/max -- before changing it.

I have left a handful of bootloaders that are too annoying to
compile-test, and some dead code:

cobalt ews4800mips hp300 hppa ia64 luna68k vax
acorn32/if_ie.c (not included in any kernels)
macppc/if_gm.c (superseded by gem(4))

It should be easy to fix the fallout once identified -- this way of
doing things fails safe, and the goal here, after all, is to _avoid_
silent integer truncations, not introduce them.

Maybe one day we can reintroduce min/max as type-generic things that
never silently truncate.  But we should avoid doing that for a while,
so that existing code has a chance to be detected by the compiler for
conversion to uimin/uimax without changing the semantics until we can
properly audit it all.  (Who knows, maybe in some cases integer
truncation is actually intended!)

Try to fix previous to make it compile.

make check cleaner, and simplify the code.

Correct wrong assertion code introduced by rev 1.41:
http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/dev/wscons/wsemul_vt100.c#rev1.41

Fix kernel panic reported in PR kern/52935.

update from HEAD

Use __arraycount a bunch
Also, DIAGNOSTIC panic -> KASSERT

Use c99 initializer for wsemul_ops

Don't #ifdef DIAGNOSTIC around KASSERTs.

the definition of KASSERT does the same thing

Sync with HEAD

add support for loading fonts in vcons and subsequently resizing screens
- drivers can use this by setting VCONS_LOADFONT and WSSCREEN_RESIZE
- each vcons screen can now have its own font and geometry
- while there, add support for xterm's ESC[18t to report the text buffer's
  size

With this tou can:
wsfontload -N foo  /usr/share/wscons/fonts/flori.816
wsconsctl -dw font=foo
currently this is limited to drivers that don't use the glyph cache, like genfb

Sync with HEAD

to garnish, dust with _KERNEL_OPT

Rebase to HEAD as of a few days ago.

sync with head.

for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.

this commit was splitted into small chunks to avoid
a limitation of cvs.  ("Protocol error: too many arguments")

sync with head

use __USE() where appropriate.

Pull up revisions (requested by bouyer in ticket #1727):
  src/sys/dev/wscons/wsemul_vt100.c         1.31
  src/sys/dev/wscons/wsemul_vt100_chars.c   1.12
  src/sys/dev/wscons/wsksymdef.h            1.62

s/portugese/portuguese/, spotted by Ari Constancio in PR misc/40202.

Pull up revisions (requested by bouyer in ticket #1727):
  src/sys/dev/wscons/wsemul_vt100.c         1.31
  src/sys/dev/wscons/wsemul_vt100_chars.c   1.12
  src/sys/dev/wscons/wsksymdef.h            1.62

s/portugese/portuguese/, spotted by Ari Constancio in PR misc/40202.

Pull up revisions (requested by bouyer in ticket #1727):
  src/sys/dev/wscons/wsemul_vt100.c         1.31
  src/sys/dev/wscons/wsemul_vt100_chars.c   1.12
  src/sys/dev/wscons/wsksymdef.h            1.62

s/portugese/portuguese/, spotted by Ari Constancio in PR misc/40202.

Sync with HEAD.

sync with head

put back the "vt100base_data" variable which was souce of confusion,
it is really needed, as noted by Geoff Wing

Remove accidental commit.

Oops. Whitespace in previous.

Allow big parts of the vt100 emulation code (what is in
wsemul_vt100_subr.c) to be used by alternative terminal emulators
(which are not in-tree yet but can be loaded as LKMs).
For this, split out that part of the state structure which is used
by the sharable code and include that in the original vt100 state.
This is only a query-replace and sed(1) job for now, it makes sense
to rearrange things a bit so that even more code can be changed --
will do so later.

Sync with HEAD.

Commit is split, to avoid a "too many arguments" protocol error.

sync with head.

Sync with HEAD.

s/portugese/portuguese/, spotted by Ari Constancio in PR misc/40202.

sync with head.

sync with head.

Sync with head.

__unused removal on arguments; approved by core.

sync with head

- sprinkle __unused on function decls.
- fix a couple of unused bugs
- no more -Wno-unused for i386

merge ktrace-lwp.

sync with -current

sync with head.  xen and whitespace.  xen part is not finished.

Sync with HEAD.

Hi Perry!

nuke trailing whitespace

Fix the sync with head I botched.

Sync with HEAD.

Sync with HEAD

Implement support to dynamically change wscons console and kernel colors.

Two new ioctls are added to the wsdisplay device, named WSDISPLAY_GMSGATTRS
and WSDISPLAY_SMSGATTRS, used to retrieve the actual values and set them,
respectively (the name, if you are wondering, comes from "message attributes").

A new emulop is added to the underlying display driver (only vga, for now)
which sets the new attribute for the whole screen, without having to clear
it.  This is optional, which means that this also works with other drivers
that don't have this new operation.

Five new kernel options have been added, although only documented in
i386 kernels (for now):
- WSDISPLAY_CUSTOM_OUTPUT, which enables the ioctls described above to
  change the colors dynamically from userland.  This is enabled by default
  in the GENERIC kernel (as well as others) but disabled on all INSTALL*
  kernels (as this feature is useless there).
- WS_DEFAULT_COLATTR, WS_DEFAULT_MONOATTR, WS_DEFAULT_BG and WS_DEFAULT_FG,
  which specify the default colors for the console at boot time.  These have
  the same meaning as the (already existing) WS_KERNEL_* variables.

wsconsctl is modified to add msg.default.{attrs,bg,fg} and
msg.kernel.{attrs,bg,fg} to the display part, so that colors can be changed
after boot.

Tested on NetBSD/i386 with vga (and vga in mono mode), and on NetBSD/mac68k.
No objections in tech-kern@.

remove license clauses 3 and 4 from my cpoyright notices

Apply patch (requested by drochner in ticket #1277):

fix crash due to wrong argument in the (almost useless)
DECRQUPSS escape sequence

PR/17738: Matthias Drochner, PR/21230: Onno van der Linden: vt100 wscons
crashes restoring cursor. Fixed by adding a flag as suggested.

Pullup rev. 1.24 via patch (requested by drochner in ticket #43)
 vt100 wscons crashes restoring cursor. Fixed by adding a flag as suggested.
 Fixes PR#17738, PR#21230

PR/17738: Matthias Drochner, PR/21230: Onno van der Linden: vt100 wscons
crashes restoring cursor. Fixed by adding a flag as suggested.

stylistic change: put variable declarations to the top of a function

Sync with HEAD.

Fix build glitch.

When moving the cursor down, only scroll up if cursor is exactly at
bottom of scroll region; don't scroll if below scroll region.
Should fix kern/11827

Catch up to -current.

sync kqueue with -current; this includes merge of gehenna-devsw branch,
merge of i386 MP branch, and part of autoconf rototil work

remove trailing \n in panic().  approved perry.

sync kqueue branch with HEAD

Catch up to -current.

catch up with -current.

switch/case KNF.

alloc_attr -> allocattr

Approved by Matthias Drochner.

Catch up to -current.

Sync w/ -current.

Call malloc(9) with M_ZERO flag instead of memset() after malloc().

Sync kqueue branch with -current.

Catch up to -current.

add/cleanup RCSIDs

Catch up to -current.

ANSIfy.

Sync with HEAD.

don't panic if there is ESC in kernel output, just print a warning and
ignore the ESC; also remove the #ifdef DIAGNOSTIC

Update thorpej_scsipi to -current as of a month ago
A i386 GENERIC kernel compiles without the siop, ahc and bha drivers
(will be updated later). i386 IDE/ATAPI and ncr work, as well as
sparc/esp_sbus. alpha should work as well (untested yet).
siop, ahc and bha will be updated once I've updated the branch to current
-current, as well as machine-dependant code.

Add a concept of the `background attribute'.  This is the same as the
current attribute, but has all non-color flags turned off.  Use this when
doing erasure, as this allows us to optimize repainting in curses.

XXX The way the default attribute is handled is totally bogus and needs to
be fixed.

Pull up to last week's -current.

Sync with -current

Only update the cursor state if it's enabled.

don't erase the characters moved over on a <TAB>, a real VT100 doesn't
do this - thanks Bill Sommerfeld (PR kern/7124)

define a "clear screen" command to the emulator and complete the
emulation's "reset" implementations as far as useful

export functions to reset the emulator and the character mappings

Change from bcopy/bzero to memxxx.  From PR 6778 by
Erik Bertelsen <erik@q610.ebe.uni-c.dk>.

Separate special character handling from normal output so that they
are obeyed even during an escape sequence.
This is how the original VT100 behaves.

don't set a tabstop in column 1

fix gcc unused variable warning
From Matthias Scheler <tron@lyssa.owl.de>.

Fix initialization in console case: use the paramerters which were passed
in the cninit() call - the new ones are not useful.

Improvements to the VT100 emulation:
-display DEC special graphics and DEC technical characters as far as
  possible
-implement the font switching controls (need documentation!)
-behave well if double-width characters are requested
-simplify the state machine: store CSI command modifiers in variables
  instead of dedicating own states to each of them

Change the calling interface for text output (to the graphics driver)
to take a single character at a time, where the character is an "int" now.
The old interface (took a string) was never called with more than 1
char to print, and the "int" allows us to handle charsets cleanly.

First cut on a VT100 emulation.
It should be able to parse escape sequences up to VT300, but not everything
is implemented. Most notably, there is no font handling - all displayable
characters are handed to the graphics driver. To solve this, a serious
interface change to the graphics driver is needed (Unicode?).