The NetBSD Project

CVS log for src/sys/dev/usb/motg.c

[BACK] Up to [cvs.NetBSD.org] / src / sys / dev / usb

Request diff between arbitrary revisions


Default branch: MAIN


Revision 1.41 / (download) - annotate - [select for diffs], Wed Mar 9 22:17:41 2022 UTC (11 months ago) by riastradh
Branch: MAIN
CVS Tags: netbsd-10-base, netbsd-10, bouyer-sunxi-drm-base, bouyer-sunxi-drm, HEAD
Changes since 1.40: +2 -4 lines
Diff to previous 1.40 (colored)

usb: Provisionally release bus lock around ubm_rhctrl.

This isn't quite correct, but it avoids a deadlock:

- *_roothub_ctrl holds bus lock, waits in usb_delay_ms for kpause
- softint waits for bus lock, holds up kpause wakeup

The deadlock is new since recent changes to hold the bus lock over
upm_start/upm_transfer.  Making this change regresses to other
problems:

- *_suspend/resume and *_roothub_ctrl often touch the same portsc
   registers

- roothub_ctrl_abort needs to wait for ubm_rhctrl to complete.

  When the bus lock was held across both, a noop served here, but we
  can't hold the bus lock across both, so that doesn't work.

However, these problems -- which we've had for a long time -- seem to
be less bad than the deadlock.  So let's avoid the deadlock for now
and then work out another way to serialize suspend/resume/rhctrl and
aborts.

Candidate fix for PR kern/56739.

Revision 1.40 / (download) - annotate - [select for diffs], Thu Mar 3 06:12:11 2022 UTC (11 months, 1 week ago) by riastradh
Branch: MAIN
Changes since 1.39: +14 -17 lines
Diff to previous 1.39 (colored)

usb: Hold pipe lock across upm_transfer and upm_start.

This simplifies the code and fixes races with abort.  Access to the
pipe's queue is now done exclusively while the pipe is locked.

Revision 1.39 / (download) - annotate - [select for diffs], Thu Mar 3 06:08:50 2022 UTC (11 months, 1 week ago) by riastradh
Branch: MAIN
Changes since 1.38: +2 -3 lines
Diff to previous 1.38 (colored)

usb: Factor usb_transfer_complete out of ubm_abortx method.

Revision 1.38 / (download) - annotate - [select for diffs], Thu Mar 3 06:04:31 2022 UTC (11 months, 1 week ago) by riastradh
Branch: MAIN
Changes since 1.37: +5 -45 lines
Diff to previous 1.37 (colored)

usb: Factor usb_insert_transfer out of upm_transfer and make private.

Almost every upm_transfer function starts with:

	mutex_enter(&sc->sc_lock);
	err = usb_insert_transfer(xfer);
	mutex_exit(&sc->sc_lock);
	if (err)
		return err;

Some of them have debug messages sprinkled in here too, or assert
that err == USBD_NORMAL_COMPLETION (alternative is USBD_IN_PROGRESS,
only for pipes with up_running or up_serialise, presumably not
applicable for these types of pipes).  Some of them also assert
xfer->ux_status == USBD_NOT_STARTED, which is guaranteed on entry and
preserved by usb_insert_transer.

Exceptions:

- arch/mips/adm5120/dev/ahci.c ahci_device_isoc_transfer just returns
  USBD_NORMAL_COMPLETION, but I'm pretty sure this is and always has
  been broken anyway, so won't make anything worse (if anything, might
  make it better...)

- external/bsd/dwc2/dwc2.c dwc2_device_bulk_transfer and
  dwc2_device_isoc_transfer _also_ issue dwc2_device_start(xfer)
  under the lock.  This is probably a better way to do it, but let's
  do it uniformly across all HCIs at once.

- rump/dev/lib/libugenhc/ugenhc.c rumpusb_device_bulk_transfer
  sometimes returns USBD_IN_PROGRESS _without_ queueing the transfer,
  in the !rump_threads case.  Not really sure how this is supposed to
  work...  If it actually breaks anything, we can figure it out.

Revision 1.37 / (download) - annotate - [select for diffs], Sat Aug 7 16:19:16 2021 UTC (18 months ago) by thorpej
Branch: MAIN
CVS Tags: thorpej-i2c-spi-conf2-base, thorpej-i2c-spi-conf2
Changes since 1.36: +3 -3 lines
Diff to previous 1.36 (colored)

Merge thorpej-cfargs2.

Revision 1.36.8.1 / (download) - annotate - [select for diffs], Wed Aug 4 23:07:57 2021 UTC (18 months ago) by thorpej
Branch: thorpej-cfargs2
Changes since 1.36: +3 -3 lines
Diff to previous 1.36 (colored) next main 1.37 (colored)

Adapt to CFARGS().

Revision 1.36 / (download) - annotate - [select for diffs], Sat Apr 24 23:36:59 2021 UTC (21 months, 2 weeks ago) by thorpej
Branch: MAIN
CVS Tags: thorpej-i2c-spi-conf-base, thorpej-i2c-spi-conf, thorpej-futex2-base, thorpej-futex2, thorpej-cfargs2-base, cjep_sun2x-base1, cjep_sun2x-base, cjep_sun2x, cjep_staticlib_x-base1, cjep_staticlib_x-base, cjep_staticlib_x
Branch point for: thorpej-cfargs2
Changes since 1.35: +4 -3 lines
Diff to previous 1.35 (colored)

Merge thorpej-cfargs branch:

Simplify and make extensible the config_search() / config_found() /
config_attach() interfaces: rather than having different variants for
which arguments you want pass along, just have a single call that
takes a variadic list of tag-value arguments.

Adjust all call sites:
- Simplify wherever possible; don't pass along arguments that aren't
  actually needed.
- Don't be explicit about what interface attribute is attaching if
  the device only has one.  (More simplification.)
- Add a config_probe() function to be used in indirect configuiration
  situations, making is visibly easier to see when indirect config is
  in play, and allowing for future change in semantics.  (As of now,
  this is just a wrapper around config_match(), but that is an
  implementation detail.)

Remove unnecessary or redundant interface attributes where they're not
needed.

There are currently 5 "cfargs" defined:
- CFARG_SUBMATCH (submatch function for direct config)
- CFARG_SEARCH (search function for indirect config)
- CFARG_IATTR (interface attribte)
- CFARG_LOCATORS (locators array)
- CFARG_DEVHANDLE (devhandle_t - wraps OFW, ACPI, etc. handles)

...and a sentinel value CFARG_EOL.

Add some extra sanity checking to ensure that interface attributes
aren't ambiguous.

Use CFARG_DEVHANDLE in MI FDT, OFW, and ACPI code, and macppc and shark
ports to associate those device handles with device_t instance.  This
will trickle trough to more places over time (need back-end for pre-OFW
Sun OBP; any others?).

Revision 1.35.6.1 / (download) - annotate - [select for diffs], Sun Mar 21 21:09:15 2021 UTC (22 months, 2 weeks ago) by thorpej
Branch: thorpej-cfargs
Changes since 1.35: +4 -3 lines
Diff to previous 1.35 (colored) next main 1.36 (colored)

Give config_found() the same variadic arguments treatment as
config_search().  This commit only adds the CFARG_EOL sentinel
to the existing config_found() calls.  Conversion of config_found_sm_loc()
and config_found_ia() call sites will be in subsequent commits.

Revision 1.21.2.2 / (download) - annotate - [select for diffs], Wed Apr 8 14:08:13 2020 UTC (2 years, 10 months ago) by martin
Branch: phil-wifi
Changes since 1.21.2.1: +104 -64 lines
Diff to previous 1.21.2.1 (colored) to branchpoint 1.21 (colored) next main 1.22 (colored)

Merge changes from current as of 20200406

Revision 1.35 / (download) - annotate - [select for diffs], Sat Mar 14 02:35:33 2020 UTC (2 years, 10 months ago) by christos
Branch: MAIN
CVS Tags: thorpej-futex-base, thorpej-futex, thorpej-cfargs-base, phil-wifi-20200421, phil-wifi-20200411, phil-wifi-20200406, bouyer-xenpvh-base2, bouyer-xenpvh-base1, bouyer-xenpvh-base, bouyer-xenpvh
Branch point for: thorpej-cfargs
Changes since 1.34: +7 -7 lines
Diff to previous 1.34 (colored)

revert the 0x% -> %# change for fixed width formats pointed out by uwe.

Revision 1.34 / (download) - annotate - [select for diffs], Fri Mar 13 18:17:40 2020 UTC (2 years, 10 months ago) by christos
Branch: MAIN
Changes since 1.33: +18 -18 lines
Diff to previous 1.33 (colored)

PR/55068: sc.dying: Fix printf formats:
- no %s/%p for kernel log
- 0x% -> %#
- always %j for kernel log

Revision 1.25.4.1 / (download) - annotate - [select for diffs], Sun Mar 1 12:35:16 2020 UTC (2 years, 11 months ago) by martin
Branch: netbsd-9
CVS Tags: netbsd-9-3-RELEASE, netbsd-9-2-RELEASE, netbsd-9-1-RELEASE
Changes since 1.25: +93 -53 lines
Diff to previous 1.25 (colored) next main 1.26 (colored)

Pull up following revision(s) (requested by riastradh in ticket #744):

	sys/dev/usb/uhci.c: revision 1.292
	sys/dev/usb/uhci.c: revision 1.293
	sys/dev/usb/usbdi.h: revision 1.99
	sys/dev/usb/motg.c: revision 1.26
	sys/dev/usb/motg.c: revision 1.27
	sys/dev/usb/motg.c: revision 1.28
	sys/dev/usb/motg.c: revision 1.29
	sys/external/bsd/dwc2/dwc2.c: revision 1.70
	sys/external/bsd/dwc2/dwc2.c: revision 1.71
	sys/dev/usb/usb.c: revision 1.181
	sys/arch/mips/adm5120/dev/ahci.c: revision 1.20
	sys/dev/usb/usb.c: revision 1.182
	sys/dev/usb/xhci.c: revision 1.116
	sys/dev/usb/xhci.c: revision 1.117
	sys/dev/usb/xhci.c: revision 1.118
	sys/dev/usb/uhci.c: revision 1.289
	sys/dev/usb/usbdivar.h: revision 1.121
	sys/dev/usb/usbdi.c: revision 1.190
	sys/dev/usb/usbdivar.h: revision 1.122
	sys/dev/usb/usbdi.c: revision 1.191
	sys/dev/usb/usbdi.c: revision 1.192
	sys/external/bsd/dwc2/dwc2var.h: revision 1.7
	sys/dev/usb/motg.c: revision 1.30
	sys/dev/usb/motg.c: revision 1.31
	sys/dev/usb/motg.c: revision 1.32
	sys/dev/usb/motg.c: revision 1.33
	sys/external/bsd/dwc2/dwc2.c: revision 1.67
	sys/external/bsd/dwc2/dwc2.c: revision 1.68
	sys/dev/usb/ehci.c: revision 1.270
	sys/external/bsd/dwc2/dwc2.c: revision 1.69
	sys/dev/usb/usbdi.h: revision 1.100
	sys/dev/usb/ehci.c: revision 1.271
	sys/arch/mips/adm5120/dev/ahci.c: revision 1.18
	sys/dev/usb/usbdi.h: revision 1.101
	sys/dev/usb/ehci.c: revision 1.272
	sys/dev/ic/sl811hs.c: revision 1.103
	sys/arch/mips/adm5120/dev/ahci.c: revision 1.19
	sys/dev/usb/ehci.c: revision 1.273
	sys/dev/usb/ohci.c: revision 1.293
	sys/dev/usb/uhci.c: revision 1.290
	sys/dev/usb/ohci.c: revision 1.294
	sys/dev/usb/uhci.c: revision 1.291
	sys/dev/usb/ohci.c: revision 1.295

Teach usb_rem_task to return whether removed from queue or not.

New function usb_task_pending for diagnostic assertions.
Usable only for negative diagnostic assertions:

        KASSERT(!usb_task_pending(dev, task))

If you can think of a better name for this than !usb_task_pending,
I'm all ears.

 -

Nothing guarantees xfer's timeout has completed.

Wait for it when we free the xfer.

 -


New xfer state variables ux_timeout_set and ux_timeout_reset.

These are needed because:
- The host controller interrupt cannot wait for the callout or task
  to finish running.
- Nothing in the USBD API as is waits for the callout or task to
  finish running.
- Callers expect to be able to resubmit USB xfers from xfer callbacks
  without waiting for anything to finish running.

The variable ux_timeout_set can be used by a host controller to
decide on submission whether to schedule the callout or to ask an
already-scheduled callout or already-queued task to reschedule the
callout, by setting the variable ux_timeout_reset to true.

When the callout or task runs and sees that ux_timeout_reset is true,
rather than queue the task or abort the xfer, it can instead just
schedule the callout anew.

 -

Fix steady state of timeouts in ehci.

This is complicated because:
1. There are three ways that an xfer can be completed:
   (a) hardware interrupt completes xfer
   (b) software decision aborts xfer with USBD_CANCELLED
   (c) timeout aborts xfer with USBD_TIMEOUT
2. The timeout abort can't be done in callout because ehci_sync_hc,
   called unconditionally by ehci_abort_xfer to wait until the device
   has finished using any references to the xfer, may sleep.  So we
   have to schedule a callout that, when run, will schedule a usb_task.
3. The hardware completion interrupt can't sleep waiting for a callout
   or task to finish -- can't use callout_halt or usb_rem_task_wait.
   So the callout and usb_task must be able to run _after_ the hardware
   completion interrupt, and recognize that they're late to the party.
   (Note, though, that usbd_free_xfer does wait for the callout and
   task to complete, so there's no danger they may use themselves after
   free.)
4. The xfer may resubmitted -- and the timeout may be rescheduled --
   immediately after the hardware completion interrupt, _while_ the
   callout and/or usb_task may still be scheduled.  Specifically, we
   may have the following sequence of events:
   (a) hardware completion interrupt
   (b) callout or usb_task fires
   (c) driver resubmits xfer
   (d) callout or usb_task acquires lock and looks around dazed and
       bewildered at the firehose of events like reading the news in 2019

The mechanism for sorting this out is that we have two bits of state:
- xfer->ux_timeout_set informs the driver, when submitting an xfer and
  setting up its timeout, whether either the callout or usb_task is
  already scheduled or not.
- xfer->ux_timeout_reset informs the callout or usb_task whether it
  should reschedule the callout, because the xfer got resubmitted, or
  not.

 -

Factor out HCI-independent xfer completion logic.

New API for HCI drivers to synchronize hardware completion
interrupts, synchronous aborts, and asynchronous timeouts:
- When submitting an xfer to hardware, call
  usbd_xfer_schedule_timeout(xfer).
- On HCI completion interrupt for xfer completion:
        if (!usbd_xfer_trycomplete(xfer))
                return;         /* timed out or aborted, ignore it */
- In upm_abort methods, call usbd_xfer_abort(xfer).

For HCI drivers that use this API (not needed in drivers that don't,
or for xfers like root intr xfers that don't use it):
- New ubm_abortx method serves role of former *hci_abort_xfer, but
  without any logic for wrangling timeouts/callouts/tasks -- caller
  in usbd_xfer_abort has already handled them.
- New ubm_dying method, returns true if the device is in the process
  of detaching, used by the timeout logic.

Converted and tested:
- ehci
- ohci

Converted and compile-tested:
- ahci (XXX did this ever work?)
- dwc2
- motg (XXX missing usbd_xfer_schedule_timeout in motg_*_start?)
- uhci
- xhci

Not changed:
- slhci (sys/dev/ic/sl811hs.c) -- doesn't use a separate per-xfer
  callout for timeouts (XXX but maybe should?)
- ugenhc (sys/rump/dev/lib/libugenhc/ugenhc.c) -- doesn't manage its
  own transfer timeouts

 -

Fix steady state of root intr xfers.

Why?
- Avoid completing a root intr xfer multiple times in races.
- Avoid potential use-after-free in poll_hub callouts (uhci, ahci).

How?
- Use sc->sc_intr_xfer or equivalent to store only a pending xfer
  that has not yet completed -- whether successfully, by timeout, or
  by synchronous abort.  When any of those happens, set it to null
  under the lock, so the xfer is completed only once.
- For hci drivers that use a callout to poll the root hub (uhci, ahci):
  . Pass the softc pointer, not the xfer, to the callout, so the
    callout is not even tempted to use xfer after free -- if the
    callout fires, but the xfer is synchronously aborted before the
    callout can do anything, the xfer might be freed by the time the
    callout starts to examine it.
  . Teach the callout to do nothing if it is callout_pending after it
    has fired.  This way:
    1. completion or synchronous abort can just callout_stop
    2. start can just callout_schedule
    If the callout had already fired before (1), and doesn't acquire
    the bus lock until after (2), it may be tempted to abort the new
    root intr xfer just after submission, which would be wrong -- so
    instead we just have the callout do nothing if it notices it has
    been rescheduled, since it will fire again after the appropriate
    time has elapsed.

 -

Initialize xfer->ux_status in uhci_root_intr_start.

Otherwise, it will be USBD_NOT_STARTED, so usbd_ar_pipe will skip
calling upm_abort.
Candidate fix for PR kern/54963, same problem as reported at:
href="https://mail-index.NetBSD.org/current-users/2020/02/13/msg037740.html

 -

Set ux_isdone in uhci_poll_hub for DIAGNOSTIC.

 -

Fix mistakes in previous sloppy change with root intr xfers.
- Make sure ux_status is set to USBD_IN_PROGRESS when started.
  Otherwise, if it is still in flight when we abort the pipe,
  usbd_ar_pipe will skip calling upm_abort.
- Initialize ux_status under the lock; in principle a completion
  interrupt (or a delay) could race with the initialization.
- KASSERT that the xfer is in progress when we're about to complete
  it.

Candidate fix for PR kern/54963 for other HCI drivers than uhci.
ok nick
ok phone
(This is the change that nick evidently MEANT to ok when he ok'd the
previous one!)

 -

Fix build

 -

Fix non-DIAGNOSTIC builds.

 -

Fix wrong KASSERT in motg abort.
This has been wrong since last summer when we did the transition to
xfer->ux_status = USBD_CANCELLED earlier.
XXX pullup-9

 -

Fix mistakes in timeout/abort/completion changes in motg(4).
- Call usbd_xfer_schedule_timeout so we actually do time out.
- Don't call usbd_xfer_trycomplete until all the data have been
  transferred -- it commits to completion, not timeout.
- Use xfer->ux_status != USBD_IN_PROGRESS to test whether, after a
  partial write, an xfer has been interrupted or timed out and need
  not be continued.
- Remove wrong assertion.

 -

Fix mistake in use of usbd_xfer_schedule_timeout in motg.

This code path is used both for xfers that are new, and xfers that
are being done piece by piece and are partway done.  For the latter
case, skip usbd_xfer_schedule_timeout so we schedule it only once per
xfer.

 -

Simplify some branches and kassert some redundant assignments.

Revision 1.25.6.1 / (download) - annotate - [select for diffs], Sat Feb 29 20:19:16 2020 UTC (2 years, 11 months ago) by ad
Branch: ad-namecache
Changes since 1.25: +93 -53 lines
Diff to previous 1.25 (colored) next main 1.26 (colored)

Sync with head.

Revision 1.33 / (download) - annotate - [select for diffs], Sun Feb 23 08:54:55 2020 UTC (2 years, 11 months ago) by riastradh
Branch: MAIN
CVS Tags: is-mlppp-base, is-mlppp, ad-namecache-base3
Changes since 1.32: +6 -10 lines
Diff to previous 1.32 (colored)

Simplify some branches and kassert some redundant assignments.

Revision 1.32 / (download) - annotate - [select for diffs], Sun Feb 23 08:54:47 2020 UTC (2 years, 11 months ago) by riastradh
Branch: MAIN
Changes since 1.31: +14 -6 lines
Diff to previous 1.31 (colored)

Fix mistake in use of usbd_xfer_schedule_timeout in motg.

This code path is used both for xfers that are new, and xfers that
are being done piece by piece and are partway done.  For the latter
case, skip usbd_xfer_schedule_timeout so we schedule it only once per
xfer.

Revision 1.31 / (download) - annotate - [select for diffs], Wed Feb 19 16:01:37 2020 UTC (2 years, 11 months ago) by riastradh
Branch: MAIN
Changes since 1.30: +30 -33 lines
Diff to previous 1.30 (colored)

Fix mistakes in timeout/abort/completion changes in motg(4).

- Call usbd_xfer_schedule_timeout so we actually do time out.

- Don't call usbd_xfer_trycomplete until all the data have been
  transferred -- it commits to completion, not timeout.

- Use xfer->ux_status != USBD_IN_PROGRESS to test whether, after a
  partial write, an xfer has been interrupted or timed out and need
  not be continued.

- Remove wrong assertion.

Revision 1.30 / (download) - annotate - [select for diffs], Tue Feb 18 17:50:20 2020 UTC (2 years, 11 months ago) by riastradh
Branch: MAIN
Changes since 1.29: +2 -3 lines
Diff to previous 1.29 (colored)

Fix wrong KASSERT in motg abort.

This has been wrong since last summer when we did the transition to
xfer->ux_status = USBD_CANCELLED earlier.

XXX pullup-9

Revision 1.29 / (download) - annotate - [select for diffs], Sat Feb 15 13:56:55 2020 UTC (2 years, 11 months ago) by riastradh
Branch: MAIN
Changes since 1.28: +3 -3 lines
Diff to previous 1.28 (colored)

Fix non-DIAGNOSTIC builds.

Revision 1.28 / (download) - annotate - [select for diffs], Sat Feb 15 07:46:48 2020 UTC (2 years, 11 months ago) by skrll
Branch: MAIN
Changes since 1.27: +4 -3 lines
Diff to previous 1.27 (colored)

Fix build

Revision 1.27 / (download) - annotate - [select for diffs], Sat Feb 15 01:21:56 2020 UTC (2 years, 11 months ago) by riastradh
Branch: MAIN
Changes since 1.26: +33 -4 lines
Diff to previous 1.26 (colored)

Fix mistakes in previous sloppy change with root intr xfers.

- Make sure ux_status is set to USBD_IN_PROGRESS when started.
  Otherwise, if it is still in flight when we abort the pipe,
  usbd_ar_pipe will skip calling upm_abort.

- Initialize ux_status under the lock; in principle a completion
  interrupt (or a delay) could race with the initialization.

- KASSERT that the xfer is in progress when we're about to complete
  it.

Candidate fix for PR kern/54963 for other HCI drivers than uhci.

ok nick
ok phone

(This is the change that nick evidently MEANT to ok when he ok'd the
previous one!)

Revision 1.26 / (download) - annotate - [select for diffs], Wed Feb 12 16:01:00 2020 UTC (2 years, 11 months ago) by riastradh
Branch: MAIN
Changes since 1.25: +40 -30 lines
Diff to previous 1.25 (colored)

Factor out HCI-independent xfer completion logic.

New API for HCI drivers to synchronize hardware completion
interrupts, synchronous aborts, and asynchronous timeouts:

- When submitting an xfer to hardware, call
  usbd_xfer_schedule_timeout(xfer).

- On HCI completion interrupt for xfer completion:

	if (!usbd_xfer_trycomplete(xfer))
		return;		/* timed out or aborted, ignore it */

- In upm_abort methods, call usbd_xfer_abort(xfer).

For HCI drivers that use this API (not needed in drivers that don't,
or for xfers like root intr xfers that don't use it):

- New ubm_abortx method serves role of former *hci_abort_xfer, but
  without any logic for wrangling timeouts/callouts/tasks -- caller
  in usbd_xfer_abort has already handled them.

- New ubm_dying method, returns true if the device is in the process
  of detaching, used by the timeout logic.

Converted and tested:
- ehci
- ohci

Converted and compile-tested:
- ahci (XXX did this ever work?)
- dwc2
- motg (XXX missing usbd_xfer_schedule_timeout in motg_*_start?)
- uhci
- xhci

Not changed:

- slhci (sys/dev/ic/sl811hs.c) -- doesn't use a separate per-xfer
  callout for timeouts (XXX but maybe should?)

- ugenhc (sys/rump/dev/lib/libugenhc/ugenhc.c) -- doesn't manage its
  own transfer timeouts

- vhci -- times transfers out only on detach; could be adapted easily
  if we wanted to use the xfer->ux_callout

Revision 1.21.2.1 / (download) - annotate - [select for diffs], Mon Jun 10 22:07:34 2019 UTC (3 years, 8 months ago) by christos
Branch: phil-wifi
Changes since 1.21: +46 -25 lines
Diff to previous 1.21 (colored)

Sync with HEAD

Revision 1.25 / (download) - annotate - [select for diffs], Sun Feb 17 04:17:52 2019 UTC (3 years, 11 months ago) by rin
Branch: MAIN
CVS Tags: phil-wifi-20191119, phil-wifi-20190609, netbsd-9-base, netbsd-9-0-RELEASE, netbsd-9-0-RC2, netbsd-9-0-RC1, isaki-audio2-base, isaki-audio2, ad-namecache-base2, ad-namecache-base1, ad-namecache-base
Branch point for: netbsd-9, ad-namecache
Changes since 1.24: +4 -3 lines
Diff to previous 1.24 (colored)

Fix assertion failures triggered by usbdi.c,v 1.182, when devices
are detached.

This is because xfers of USBD_NOT_STARTED can be removed from queue
in an invisible way to host controller drivers.

Discussed on tech-kern.

Revision 1.19.2.3 / (download) - annotate - [select for diffs], Sat Jan 26 22:00:24 2019 UTC (4 years ago) by pgoyette
Branch: pgoyette-compat
CVS Tags: pgoyette-compat-merge-20190127
Changes since 1.19.2.2: +5 -6 lines
Diff to previous 1.19.2.2 (colored) to branchpoint 1.19 (colored) next main 1.20 (colored)

Sync with HEAD

Revision 1.24 / (download) - annotate - [select for diffs], Tue Jan 22 06:39:24 2019 UTC (4 years ago) by skrll
Branch: MAIN
CVS Tags: pgoyette-compat-20190127
Changes since 1.23: +5 -6 lines
Diff to previous 1.23 (colored)

#ifdef DIAGNOSTIC / panic -> KASSERTMSG

Revision 1.19.2.2 / (download) - annotate - [select for diffs], Thu Sep 6 06:56:04 2018 UTC (4 years, 5 months ago) by pgoyette
Branch: pgoyette-compat
Changes since 1.19.2.1: +41 -20 lines
Diff to previous 1.19.2.1 (colored) to branchpoint 1.19 (colored)

Sync with HEAD

Resolve a couple of conflicts (result of the uimin/uimax changes)

Revision 1.23 / (download) - annotate - [select for diffs], Mon Sep 3 16:29:33 2018 UTC (4 years, 5 months ago) by riastradh
Branch: MAIN
CVS Tags: pgoyette-compat-20190118, pgoyette-compat-1226, pgoyette-compat-1126, pgoyette-compat-1020, pgoyette-compat-0930, pgoyette-compat-0906
Changes since 1.22: +7 -7 lines
Diff to previous 1.22 (colored)

Rename min/max -> uimin/uimax for better honesty.

These functions are defined on unsigned int.  The generic name
min/max should not silently truncate to 32 bits on 64-bit systems.
This is purely a name change -- no functional change intended.

HOWEVER!  Some subsystems have

	#define min(a, b)	((a) < (b) ? (a) : (b))
	#define max(a, b)	((a) > (b) ? (a) : (b))

even though our standard name for that is MIN/MAX.  Although these
may invite multiple evaluation bugs, these do _not_ cause integer
truncation.

To avoid `fixing' these cases, I first changed the name in libkern,
and then compile-tested every file where min/max occurred in order to
confirm that it failed -- and thus confirm that nothing shadowed
min/max -- before changing it.

I have left a handful of bootloaders that are too annoying to
compile-test, and some dead code:

cobalt ews4800mips hp300 hppa ia64 luna68k vax
acorn32/if_ie.c (not included in any kernels)
macppc/if_gm.c (superseded by gem(4))

It should be easy to fix the fallout once identified -- this way of
doing things fails safe, and the goal here, after all, is to _avoid_
silent integer truncations, not introduce them.

Maybe one day we can reintroduce min/max as type-generic things that
never silently truncate.  But we should avoid doing that for a while,
so that existing code has a chance to be detected by the compiler for
conversion to uimin/uimax without changing the semantics until we can
properly audit it all.  (Who knows, maybe in some cases integer
truncation is actually intended!)

Revision 1.6.4.5 / (download) - annotate - [select for diffs], Sat Aug 25 14:57:35 2018 UTC (4 years, 5 months ago) by martin
Branch: netbsd-7
CVS Tags: netbsd-7-2-RELEASE
Changes since 1.6.4.4: +36 -15 lines
Diff to previous 1.6.4.4 (colored) to branchpoint 1.6 (colored) next main 1.7 (colored)

Pull up following revision(s) (requested by mrg in ticket #1632):

	sys/dev/usb/usbdivar.h: revision 1.117
	sys/external/bsd/dwc2/dwc2.c: revision 1.52
	sys/dev/usb/xhcivar.h: revision 1.10
	sys/dev/usb/motg.c: revision 1.22
	sys/dev/usb/ehci.c: revision 1.260
	sys/dev/usb/ehci.c: revision 1.261
	sys/dev/usb/xhci.c: revision 1.96
	sys/dev/usb/ohci.c: revision 1.282
	sys/dev/usb/ohci.c: revision 1.283
	sys/dev/usb/ehcivar.h: revision 1.45
	sys/dev/usb/uhci.c: revision 1.281
	sys/dev/usb/uhci.c: revision 1.282
	sys/dev/usb/usbdi.c: revision 1.177
	sys/dev/usb/ohcivar.h: revision 1.60
	sys/dev/usb/uhcivar.h: revision 1.55
	(all via patch)

pull across abort fixes from nick-nhusb.  add more abort fixes, using
ideas from Taylor and Nick, and myself.  special thanks to both who
inspired much of the code here, if not wrote it directly.

among other problems, this assert should no longer trigger:

   panic: kernel diagnostic assertion "xfer->ux_state == XFER_ONQU" failed: file "/current/src/sys/dev/usb/usbdi.c", line 914

using usbhist i was able to track down my instance of it being related
to userland close() beginning, dropping the sc_lock, and then the usb
softintr completes the transfer normally, and when it is done, the
abort path attempts to re-complete the transfer, and the above assert
is tripped.

changes from nhusb were commited with these logs:
--
Move the struct usb_task to struct usbd_xfer for everyone to use.
--
Set device transfer status to USBD_IN_PROGRESS if start methods succeeds
--
Actually set the transfer status on transfers in ohci_abort_xfer and
the controller is dying
--
Don't supply the lock to callout_halt when polling as it won't be held
--
Improve transfer abort
--
Mark device transfers as USBD_IN_PROGRESS appropriately and improve
abort handling
--
--
Mark device transfers as USBD_IN_PROGRESS appropriately and improve
abort handling
--

additional changes include:
- initialise the usb abort task in the HCI allocx routine, so that it
  can be safely usb_rem_task()'d.
- rework the handling of softintr vs cancellation vs timeout abort based
  upon a scheme from Taylor:
  when completing a transfer normally:
  - if the status is not in progress, it must be cancelled or timed out,
    and we should not process this xfer.
  - set the status as normal.
  - unconditionallly callout_stop() and usb_rem_task().  they're safe and
    either aren't running, or will run and do nothing.
  - finally call usb_transfer_complete().
  when aborting a transfer:
  - status should be cancelled or timed out.
  - if cancelling, callout_halt and usb_rem_task_wait() to make sure the
    timer is either done or cancelled.
  - at this point, the ux_status must not be cancelled or timed out, and
    if it is not in progress we're done.
  - set the status.
  - if the controller is dying, just return.
  - perform HCI-specific tasks to abort this xfer.
  - finally call usb_transfer_complete().
  for the timeout and timeout task:
  - if the HCI is not dying, and the ux_status is in progress, then
    trigger the usb abort task.
- remove UXFER_ABORTWAIT and UXFER_ABORTING.

tested on:
- multiple PC systems with several types of devices: ugen/UPS, ucom,
  umass with disk, ssd and cdrom backends, kbd, ms, using uhci, ehci
  and xhci.
- erlite3: sd@umass on dwc2.
- sunblade2000: kbd/ms and umass disk on ohci.

untested:
- motg, slhci and ahci.  motg has some portion of the new scheme
  applied, but slhci and ahci require more study.

future work includes pushing a lot of the common abort handling into
usbdi.c and leaving upm_abort() for HC specific tasks, but this change
is pullup-able to netbsd-7 and netbsd-8 as it does not change any
external API, as well as removing over 100 lines of code while adding
over 30 new asserts.

XXX: pullup-7, pullup-8.

fix DIAGNOSTIC build by not copying ub_usepolling to stack before use

Sprinkle __diagused

Revision 1.17.10.3 / (download) - annotate - [select for diffs], Sat Aug 25 11:29:52 2018 UTC (4 years, 5 months ago) by martin
Branch: netbsd-8
CVS Tags: netbsd-8-2-RELEASE, netbsd-8-1-RELEASE, netbsd-8-1-RC1
Changes since 1.17.10.2: +36 -15 lines
Diff to previous 1.17.10.2 (colored) to branchpoint 1.17 (colored) next main 1.18 (colored)

Pull up following revision(s) (requested by mrg in ticket #980):

	sys/dev/usb/usbdivar.h: revision 1.117
	sys/external/bsd/dwc2/dwc2.c: revision 1.52
	sys/dev/usb/xhcivar.h: revision 1.10
	sys/dev/usb/motg.c: revision 1.22
	sys/dev/usb/ehci.c: revision 1.260
	sys/dev/usb/ehci.c: revision 1.261
	sys/dev/usb/xhci.c: revision 1.96
	sys/dev/usb/ohci.c: revision 1.282
	sys/dev/usb/ohci.c: revision 1.283
	sys/dev/usb/ehcivar.h: revision 1.45
	sys/dev/usb/uhci.c: revision 1.281
	sys/dev/usb/uhci.c: revision 1.282
	sys/dev/usb/usbdi.c: revision 1.177
	sys/dev/usb/ohcivar.h: revision 1.60
	sys/dev/usb/uhcivar.h: revision 1.55
	(all via patch)

pull across abort fixes from nick-nhusb.  add more abort fixes, using
ideas from Taylor and Nick, and myself.  special thanks to both who
inspired much of the code here, if not wrote it directly.
among other problems, this assert should no longer trigger:

   panic: kernel diagnostic assertion "xfer->ux_state == XFER_ONQU" failed: file "/current/src/sys/dev/usb/usbdi.c", line 914

using usbhist i was able to track down my instance of it being related
to userland close() beginning, dropping the sc_lock, and then the usb
softintr completes the transfer normally, and when it is done, the
abort path attempts to re-complete the transfer, and the above assert
is tripped.

changes from nhusb were commited with these logs:
--
Move the struct usb_task to struct usbd_xfer for everyone to use.
--
Set device transfer status to USBD_IN_PROGRESS if start methods succeeds
--
Actually set the transfer status on transfers in ohci_abort_xfer and
the controller is dying
--
Don't supply the lock to callout_halt when polling as it won't be held
--
Improve transfer abort
--
Mark device transfers as USBD_IN_PROGRESS appropriately and improve
abort handling
--
--
Mark device transfers as USBD_IN_PROGRESS appropriately and improve
abort handling
--

additional changes include:
- initialise the usb abort task in the HCI allocx routine, so that it
  can be safely usb_rem_task()'d.
- rework the handling of softintr vs cancellation vs timeout abort based
  upon a scheme from Taylor:
  when completing a transfer normally:
  - if the status is not in progress, it must be cancelled or timed out,
    and we should not process this xfer.
  - set the status as normal.
  - unconditionallly callout_stop() and usb_rem_task().  they're safe and
    either aren't running, or will run and do nothing.
  - finally call usb_transfer_complete().
  when aborting a transfer:
  - status should be cancelled or timed out.
  - if cancelling, callout_halt and usb_rem_task_wait() to make sure the
    timer is either done or cancelled.
  - at this point, the ux_status must not be cancelled or timed out, and
    if it is not in progress we're done.
  - set the status.
  - if the controller is dying, just return.
  - perform HCI-specific tasks to abort this xfer.
  - finally call usb_transfer_complete().
  for the timeout and timeout task:
  - if the HCI is not dying, and the ux_status is in progress, then
    trigger the usb abort task.
- remove UXFER_ABORTWAIT and UXFER_ABORTING.

tested on:
- multiple PC systems with several types of devices: ugen/UPS, ucom,
  umass with disk, ssd and cdrom backends, kbd, ms, using uhci, ehci
  and xhci.
- erlite3: sd@umass on dwc2.
- sunblade2000: kbd/ms and umass disk on ohci.

untested:
- motg, slhci and ahci.  motg has some portion of the new scheme
  applied, but slhci and ahci require more study.

future work includes pushing a lot of the common abort handling into
usbdi.c and leaving upm_abort() for HC specific tasks, but this change
is pullup-able to netbsd-7 and netbsd-8 as it does not change any
external API, as well as removing over 100 lines of code while adding
over 30 new asserts.

XXX: pullup-7, pullup-8.

fix DIAGNOSTIC build by not copying ub_usepolling to stack before use

Sprinkle __diagused

Revision 1.22 / (download) - annotate - [select for diffs], Thu Aug 9 06:26:47 2018 UTC (4 years, 6 months ago) by mrg
Branch: MAIN
CVS Tags: jdolecek-ncqfixes-base, jdolecek-ncqfixes
Changes since 1.21: +36 -15 lines
Diff to previous 1.21 (colored)

pull across abort fixes from nick-nhusb.  add more abort fixes, using
ideas from Taylor and Nick, and myself.  special thanks to both who
inspired much of the code here, if not wrote it directly.

among other problems, this assert should no longer trigger:

   panic: kernel diagnostic assertion "xfer->ux_state == XFER_ONQU" failed: file "/current/src/sys/dev/usb/usbdi.c", line 914

using usbhist i was able to track down my instance of it being related
to userland close() beginning, dropping the sc_lock, and then the usb
softintr completes the transfer normally, and when it is done, the
abort path attempts to re-complete the transfer, and the above assert
is tripped.


changes from nhusb were commited with these logs:
--
Move the struct usb_task to struct usbd_xfer for everyone to use.
--
Set device transfer status to USBD_IN_PROGRESS if start methods succeeds
--
Actually set the transfer status on transfers in ohci_abort_xfer and
the controller is dying
--
Don't supply the lock to callout_halt when polling as it won't be held
--
Improve transfer abort
--
Mark device transfers as USBD_IN_PROGRESS appropriately and improve
abort handling
--
#ifdef DIAGNOSTIC -> KASSERT and add another KASSERT
--
Mark device transfers as USBD_IN_PROGRESS appropriately and improve
abort handling
--

additional changes include:
- initialise the usb abort task in the HCI allocx routine, so that it
  can be safely usb_rem_task()'d.
- rework the handling of softintr vs cancellation vs timeout abort based
  upon a scheme from Taylor:
  when completing a transfer normally:
  - if the status is not in progress, it must be cancelled or timed out,
    and we should not process this xfer.
  - set the status as normal.
  - unconditionallly callout_stop() and usb_rem_task().  they're safe and
    either aren't running, or will run and do nothing.
  - finally call usb_transfer_complete().
  when aborting a transfer:
  - status should be cancelled or timed out.
  - if cancelling, callout_halt and usb_rem_task_wait() to make sure the
    timer is either done or cancelled.
  - at this point, the ux_status must not be cancelled or timed out, and
    if it is not in progress we're done.
  - set the status.
  - if the controller is dying, just return.
  - perform HCI-specific tasks to abort this xfer.
  - finally call usb_transfer_complete().
  for the timeout and timeout task:
  - if the HCI is not dying, and the ux_status is in progress, then
    trigger the usb abort task.
- remove UXFER_ABORTWAIT and UXFER_ABORTING.

tested on:
- multiple PC systems with several types of devices: ugen/UPS, ucom,
  umass with disk, ssd and cdrom backends, kbd, ms, using uhci, ehci
  and xhci.
- erlite3: sd@umass on dwc2.
- sunblade2000: kbd/ms and umass disk on ohci.

untested:
- motg, slhci and ahci.  motg has some portion of the new scheme
  applied, but slhci and ahci require more study.

future work includes pushing a lot of the common abort handling into
usbdi.c and leaving upm_abort() for HC specific tasks, but this change
is pullup-able to netbsd-7 and netbsd-8 as it does not change any
external API, as well as removing over 100 lines of code while adding
over 30 new asserts.

XXX: pullup-7, pullup-8.

Revision 1.19.2.1 / (download) - annotate - [select for diffs], Mon Apr 16 02:00:02 2018 UTC (4 years, 9 months ago) by pgoyette
Branch: pgoyette-compat
Changes since 1.19: +2 -23 lines
Diff to previous 1.19 (colored)

Sync with HEAD, resolve some conflicts

Revision 1.21 / (download) - annotate - [select for diffs], Mon Apr 9 16:21:11 2018 UTC (4 years, 10 months ago) by jakllsch
Branch: MAIN
CVS Tags: phil-wifi-base, pgoyette-compat-0728, pgoyette-compat-0625, pgoyette-compat-0521, pgoyette-compat-0502, pgoyette-compat-0422, pgoyette-compat-0415
Branch point for: phil-wifi
Changes since 1.20: +2 -17 lines
Diff to previous 1.20 (colored)

Stop potential misuse of vendor names and USB vendor IDs in root hub
device and string descriptors.

Firstly: Few vendors have identical PCI-SIG vendor IDs and USB-IF vendor
IDs.  As such, using the PCI vendor ID as a USB vendor ID may trample
on whomever is allocated that USB vendor ID.

Secondly: The vendor of the host controller hardware implementation has
little to nothing to do with our usbroothub implementation.  Thus we
should not potentially associate any problems therewith to such third
party.

This change will result in root hubs being identified by USB Vendor ID
0x0000.  Root hub vendor string will now be "NetBSD" (or, specifically:
ostype). Product ID (0x0000) and product strings remain unchanged.

Revision 1.20 / (download) - annotate - [select for diffs], Sun Apr 8 13:36:37 2018 UTC (4 years, 10 months ago) by jmcneill
Branch: MAIN
Changes since 1.19: +2 -8 lines
Diff to previous 1.19 (colored)

Remove MOTG_ALLWINNER option

Revision 1.6.4.4 / (download) - annotate - [select for diffs], Wed Jan 3 20:02:37 2018 UTC (5 years, 1 month ago) by snj
Branch: netbsd-7
Changes since 1.6.4.3: +3 -3 lines
Diff to previous 1.6.4.3 (colored) to branchpoint 1.6 (colored)

Pull up following revision(s) (requested by skrll in ticket #1529):
	sys/dev/usb/ehci.c: revision 1.257
	sys/dev/usb/motg.c: revision 1.19
	sys/dev/usb/ohci.c: revision 1.276
	sys/dev/usb/uhci.c: revision 1.279
	sys/dev/usb/xhci.c: revision 1.77
	sys/external/bsd/dwc2/dwc2.c: revision 1.47
s/PR_NOWAIT/PR_WAITOK/ in HCD allocx (allocate xfer) method

Revision 1.8.2.3 / (download) - annotate - [select for diffs], Sun Dec 3 11:37:34 2017 UTC (5 years, 2 months ago) by jdolecek
Branch: tls-maxphys
Changes since 1.8.2.2: +614 -848 lines
Diff to previous 1.8.2.2 (colored) next main 1.9 (colored)

update from HEAD

Revision 1.17.10.2 / (download) - annotate - [select for diffs], Thu Nov 23 13:29:32 2017 UTC (5 years, 2 months ago) by martin
Branch: netbsd-8
CVS Tags: netbsd-8-0-RELEASE, netbsd-8-0-RC2, netbsd-8-0-RC1
Changes since 1.17.10.1: +3 -3 lines
Diff to previous 1.17.10.1 (colored) to branchpoint 1.17 (colored)

Pull up following revision(s) (requested by skrll in ticket #385):
	sys/dev/usb/xhci.c: revision 1.77
	sys/external/bsd/dwc2/dwc2.c: revision 1.47
	sys/dev/usb/motg.c: revision 1.19
	sys/dev/usb/ehci.c: revision 1.257
	sys/dev/usb/ohci.c: revision 1.276
	sys/dev/usb/uhci.c: revision 1.279

s/PR_NOWAIT/PR_WAITOK/ in HCD allocx (allocate xfer) method

Revision 1.19 / (download) - annotate - [select for diffs], Fri Nov 17 08:22:02 2017 UTC (5 years, 2 months ago) by skrll
Branch: MAIN
CVS Tags: tls-maxphys-base-20171202, pgoyette-compat-base, pgoyette-compat-0407, pgoyette-compat-0330, pgoyette-compat-0322, pgoyette-compat-0315
Branch point for: pgoyette-compat
Changes since 1.18: +3 -3 lines
Diff to previous 1.18 (colored)

s/PR_NOWAIT/PR_WAITOK/ in HCD allocx (allocate xfer) method

Revision 1.17.10.1 / (download) - annotate - [select for diffs], Thu Nov 2 21:29:52 2017 UTC (5 years, 3 months ago) by snj
Branch: netbsd-8
CVS Tags: matt-nb8-mediatek-base, matt-nb8-mediatek
Changes since 1.17: +77 -64 lines
Diff to previous 1.17 (colored)

Pull up following revision(s) (requested by pgoyette in ticket #335):
	share/man/man9/kernhist.9: 1.5-1.8
	sys/arch/acorn26/acorn26/pmap.c: 1.39
	sys/arch/arm/arm32/fault.c: 1.105 via patch
	sys/arch/arm/arm32/pmap.c: 1.350, 1.359
	sys/arch/arm/broadcom/bcm2835_bsc.c: 1.7
	sys/arch/arm/omap/if_cpsw.c: 1.20
	sys/arch/arm/omap/tiotg.c: 1.7
	sys/arch/evbarm/conf/RPI2_INSTALL: 1.3
	sys/dev/ic/sl811hs.c: 1.98
	sys/dev/usb/ehci.c: 1.256
	sys/dev/usb/if_axe.c: 1.83
	sys/dev/usb/motg.c: 1.18
	sys/dev/usb/ohci.c: 1.274
	sys/dev/usb/ucom.c: 1.119
	sys/dev/usb/uhci.c: 1.277
	sys/dev/usb/uhub.c: 1.137
	sys/dev/usb/umass.c: 1.160-1.162
	sys/dev/usb/umass_quirks.c: 1.100
	sys/dev/usb/umass_scsipi.c: 1.55
	sys/dev/usb/usb.c: 1.168
	sys/dev/usb/usb_mem.c: 1.70
	sys/dev/usb/usb_subr.c: 1.221
	sys/dev/usb/usbdi.c: 1.175
	sys/dev/usb/usbdi_util.c: 1.67-1.70
	sys/dev/usb/usbroothub.c: 1.3
	sys/dev/usb/xhci.c: 1.75
	sys/external/bsd/drm2/dist/drm/i915/i915_gem.c: 1.34
	sys/kern/kern_history.c: 1.15
	sys/kern/kern_xxx.c: 1.74
	sys/kern/vfs_bio.c: 1.275-1.276
	sys/miscfs/genfs/genfs_io.c: 1.71
	sys/sys/kernhist.h: 1.21
	sys/ufs/ffs/ffs_balloc.c: 1.63
	sys/ufs/lfs/lfs_vfsops.c: 1.361
	sys/ufs/lfs/ulfs_inode.c: 1.21
	sys/ufs/lfs/ulfs_vnops.c: 1.52
	sys/ufs/ufs/ufs_inode.c: 1.102
	sys/ufs/ufs/ufs_vnops.c: 1.239
	sys/uvm/pmap/pmap.c: 1.37-1.39
	sys/uvm/pmap/pmap_tlb.c: 1.22
	sys/uvm/uvm_amap.c: 1.108
	sys/uvm/uvm_anon.c: 1.64
	sys/uvm/uvm_aobj.c: 1.126
	sys/uvm/uvm_bio.c: 1.91
	sys/uvm/uvm_device.c: 1.66
	sys/uvm/uvm_fault.c: 1.201
	sys/uvm/uvm_km.c: 1.144
	sys/uvm/uvm_loan.c: 1.85
	sys/uvm/uvm_map.c: 1.353
	sys/uvm/uvm_page.c: 1.194
	sys/uvm/uvm_pager.c: 1.111
	sys/uvm/uvm_pdaemon.c: 1.109
	sys/uvm/uvm_swap.c: 1.175
	sys/uvm/uvm_vnode.c: 1.103
	usr.bin/vmstat/vmstat.c: 1.219
Reorder to test for null before null deref in debug code
--
Reorder to test for null before null deref in debug code
--
KNF
--
No need for '\n' in UVMHIST_LOG
--
normalise a BIOHIST log message
--
Update the kernhist(9) kernel history code to address issues identified
in PR kern/52639, as well as some general cleaning-up...
(As proposed on tech-kern@ with additional changes and enhancements.)
Details of changes:
* All history arguments are now stored as uintmax_t values[1], both in
   the kernel and in the structures used for exporting the history data
   to userland via sysctl(9).  This avoids problems on some architectures
   where passing a 64-bit (or larger) value to printf(3) can cause it to
   process the value as multiple arguments.  (This can be particularly
   problematic when printf()'s format string is not a literal, since in
   that case the compiler cannot know how large each argument should be.)
* Update the data structures used for exporting kernel history data to
   include a version number as well as the length of history arguments.
* All [2] existing users of kernhist(9) have had their format strings
   updated.  Each format specifier now includes an explicit length
   modifier 'j' to refer to numeric values of the size of uintmax_t.
* All [2] existing users of kernhist(9) have had their format strings
   updated to replace uses of "%p" with "%#jx", and the pointer
   arguments are now cast to (uintptr_t) before being subsequently cast
   to (uintmax_t).  This is needed to avoid compiler warnings about
   casting "pointer to integer of a different size."
* All [2] existing users of kernhist(9) have had instances of "%s" or
   "%c" format strings replaced with numeric formats; several instances
   of mis-match between format string and argument list have been fixed.
* vmstat(1) has been modified to handle the new size of arguments in the
   history data as exported by sysctl(9).
* vmstat(1) now provides a warning message if the history requested with
   the -u option does not exist (previously, this condition was silently
   ignored, with only a single blank line being printed).
* vmstat(1) now checks the version and argument length included in the
   data exported via sysctl(9) and exits if they do not match the values
   with which vmstat was built.
* The kernhist(9) man-page has been updated to note the additional
   requirements imposed on the format strings, along with several other
   minor changes and enhancements.
[1] It would have been possible to use an explicit length (for example,
     uint64_t) for the history arguments.  But that would require another
     "rototill" of all the users in the future when we add support for an
     architecture that supports a larger size.  Also, the printf(3)
format
     specifiers for explicitly-sized values, such as "%"PRIu64, are much
     more verbose (and less aesthetically appealing, IMHO) than simply
     using "%ju".
[2] I've tried very hard to find "all [the] existing users of
kernhist(9)"
     but it is possible that I've missed some of them.  I would be glad
to
     update any stragglers that anyone identifies.
--
For some reason this single kernel seems to have outgrown its declared
size as a result of the kernhist(9) changes.  Bump the size.
XXX The amount of increase may be excessive - anyone with more detailed
XXX knowledge please feel free to further adjust the value
appropriately.
--
Misssed one cast of pointer --> uintptr_t in previous kernhist(9) commit
--
And yet another one.  :(
--
Use correct mark-up for NetBSD version.
--
More improvements in grammar and readability.
--
Remove a stray '"' (obvious typo) and add a couple of casts that are
probably needed.
--
And replace an instance of "%p" conversion with "%#jx"
--
Whitespace fix. Give Bl tag table a width. Fix Xr.

Revision 1.18 / (download) - annotate - [select for diffs], Sat Oct 28 00:37:12 2017 UTC (5 years, 3 months ago) by pgoyette
Branch: MAIN
Changes since 1.17: +77 -64 lines
Diff to previous 1.17 (colored)

Update the kernhist(9) kernel history code to address issues identified
in PR kern/52639, as well as some general cleaning-up...

(As proposed on tech-kern@ with additional changes and enhancements.)

Details of changes:

* All history arguments are now stored as uintmax_t values[1], both in
  the kernel and in the structures used for exporting the history data
  to userland via sysctl(9).  This avoids problems on some architectures
  where passing a 64-bit (or larger) value to printf(3) can cause it to
  process the value as multiple arguments.  (This can be particularly
  problematic when printf()'s format string is not a literal, since in
  that case the compiler cannot know how large each argument should be.)

* Update the data structures used for exporting kernel history data to
  include a version number as well as the length of history arguments.

* All [2] existing users of kernhist(9) have had their format strings
  updated.  Each format specifier now includes an explicit length
  modifier 'j' to refer to numeric values of the size of uintmax_t.

* All [2] existing users of kernhist(9) have had their format strings
  updated to replace uses of "%p" with "%#jx", and the pointer
  arguments are now cast to (uintptr_t) before being subsequently cast
  to (uintmax_t).  This is needed to avoid compiler warnings about
  casting "pointer to integer of a different size."

* All [2] existing users of kernhist(9) have had instances of "%s" or
  "%c" format strings replaced with numeric formats; several instances
  of mis-match between format string and argument list have been fixed.

* vmstat(1) has been modified to handle the new size of arguments in the
  history data as exported by sysctl(9).

* vmstat(1) now provides a warning message if the history requested with
  the -u option does not exist (previously, this condition was silently
  ignored, with only a single blank line being printed).

* vmstat(1) now checks the version and argument length included in the
  data exported via sysctl(9) and exits if they do not match the values
  with which vmstat was built.

* The kernhist(9) man-page has been updated to note the additional
  requirements imposed on the format strings, along with several other
  minor changes and enhancements.

[1] It would have been possible to use an explicit length (for example,
    uint64_t) for the history arguments.  But that would require another
    "rototill" of all the users in the future when we add support for an
    architecture that supports a larger size.  Also, the printf(3) format
    specifiers for explicitly-sized values, such as "%"PRIu64, are much
    more verbose (and less aesthetically appealing, IMHO) than simply
    using "%ju".

[2] I've tried very hard to find "all [the] existing users of kernhist(9)"
    but it is possible that I've missed some of them.  I would be glad to
    update any stragglers that anyone identifies.

Revision 1.6.4.3 / (download) - annotate - [select for diffs], Wed Apr 5 19:54:19 2017 UTC (5 years, 10 months ago) by snj
Branch: netbsd-7
Changes since 1.6.4.2: +536 -805 lines
Diff to previous 1.6.4.2 (colored) to branchpoint 1.6 (colored)

Pull up following revision(s) (requested by skrll in ticket #1395):
	share/man/man4/axe.4: netbsd-7-nhusb
	share/man/man4/axen.4: netbsd-7-nhusb
	share/man/man4/cdce.4: netbsd-7-nhusb
	share/man/man4/uaudio.4: netbsd-7-nhusb
	share/man/man4/ucom.4: netbsd-7-nhusb
	share/man/man4/uep.4: netbsd-7-nhusb
	share/man/man4/urtw.4: netbsd-7-nhusb
	share/man/man4/usb.4: netbsd-7-nhusb
	share/man/man4/uyap.4: netbsd-7-nhusb
	share/man/man4/xhci.4: netbsd-7-nhusb
	share/man/man9/usbdi.9: netbsd-7-nhusb
	sys/arch/amd64/conf/ALL: netbsd-7-nhusb
	sys/arch/amd64/conf/GENERIC: netbsd-7-nhusb
	sys/arch/amiga/dev/slhci_zbus.c: netbsd-7-nhusb
	sys/arch/arm/allwinner/awin_otg.c: netbsd-7-nhusb
	sys/arch/arm/allwinner/awin_usb.c: netbsd-7-nhusb
	sys/arch/arm/amlogic/amlogic_dwctwo.c: netbsd-7-nhusb
	sys/arch/arm/at91/at91ohci.c: netbsd-7-nhusb
	sys/arch/arm/broadcom/bcm2835_dwctwo.c: netbsd-7-nhusb
	sys/arch/arm/broadcom/bcm53xx_usb.c: netbsd-7-nhusb
	sys/arch/arm/ep93xx/epohci.c: netbsd-7-nhusb
	sys/arch/arm/gemini/obio_ehci.c: netbsd-7-nhusb
	sys/arch/arm/imx/files.imx23: netbsd-7-nhusb
	sys/arch/arm/imx/imxusb.c: netbsd-7-nhusb
	sys/arch/arm/imx/imxusbreg.h: netbsd-7-nhusb
	sys/arch/arm/omap/obio_ohci.c: netbsd-7-nhusb
	sys/arch/arm/omap/omap3_ehci.c: netbsd-7-nhusb
	sys/arch/arm/omap/omapl1x_ohci.c: netbsd-7-nhusb
	sys/arch/arm/omap/tiotg.c: netbsd-7-nhusb
	sys/arch/arm/s3c2xx0/ohci_s3c24x0.c: netbsd-7-nhusb
	sys/arch/arm/samsung/exynos_usb.c: netbsd-7-nhusb
	sys/arch/arm/xscale/pxa2x0_ohci.c: netbsd-7-nhusb
	sys/arch/arm/zynq/zynq_usb.c: netbsd-7-nhusb
	sys/arch/hpcarm/dev/nbp_slhci.c: netbsd-7-nhusb
	sys/arch/hpcmips/dev/plumohci.c: netbsd-7-nhusb
	sys/arch/i386/conf/ALL: netbsd-7-nhusb
	sys/arch/i386/conf/GENERIC: netbsd-7-nhusb
	sys/arch/i386/pci/gcscehci.c: netbsd-7-nhusb
	sys/arch/luna68k/conf/GENERIC: netbsd-7-nhusb
	sys/arch/mips/adm5120/dev/ahci.c: netbsd-7-nhusb
	sys/arch/mips/adm5120/dev/ahcivar.h: netbsd-7-nhusb
	sys/arch/mips/alchemy/dev/ohci_aubus.c: netbsd-7-nhusb
	sys/arch/mips/atheros/dev/ehci_arbus.c: netbsd-7-nhusb
	sys/arch/mips/atheros/dev/ohci_arbus.c: netbsd-7-nhusb
	sys/arch/mips/conf/files.adm5120: netbsd-7-nhusb
	sys/arch/mips/ralink/ralink_ehci.c: netbsd-7-nhusb
	sys/arch/mips/ralink/ralink_ohci.c: netbsd-7-nhusb
	sys/arch/mips/rmi/rmixl_ehci.c: netbsd-7-nhusb
	sys/arch/mips/rmi/rmixl_ohci.c: netbsd-7-nhusb
	sys/arch/playstation2/dev/ohci_sbus.c: netbsd-7-nhusb
	sys/arch/powerpc/booke/dev/pq3ehci.c: netbsd-7-nhusb
	sys/arch/powerpc/ibm4xx/dev/dwctwo_plb.c: netbsd-7-nhusb
	sys/arch/x68k/dev/slhci_intio.c: netbsd-7-nhusb
	sys/conf/files: netbsd-7-nhusb
	sys/dev/cardbus/ehci_cardbus.c: netbsd-7-nhusb
	sys/dev/cardbus/ohci_cardbus.c: netbsd-7-nhusb
	sys/dev/cardbus/uhci_cardbus.c: netbsd-7-nhusb
	sys/dev/ic/sl811hs.c: netbsd-7-nhusb
	sys/dev/ic/sl811hsvar.h: netbsd-7-nhusb
	sys/dev/isa/slhci_isa.c: netbsd-7-nhusb
	sys/dev/marvell/ehci_mv.c: netbsd-7-nhusb
	sys/dev/pci/ehci_pci.c: netbsd-7-nhusb
	sys/dev/pci/ohci_pci.c: netbsd-7-nhusb
	sys/dev/pci/uhci_pci.c: netbsd-7-nhusb
	sys/dev/pci/xhci_pci.c: netbsd-7-nhusb
	sys/dev/pcmcia/slhci_pcmcia.c: netbsd-7-nhusb
	sys/dev/usb/Makefile.usbdevs: netbsd-7-nhusb
	sys/dev/usb/TODO: netbsd-7-nhusb
	sys/dev/usb/TODO.usbmp: netbsd-7-nhusb
	sys/dev/usb/aubtfwl.c: netbsd-7-nhusb
	sys/dev/usb/auvitek.c: netbsd-7-nhusb
	sys/dev/usb/auvitek_audio.c: netbsd-7-nhusb
	sys/dev/usb/auvitek_dtv.c: netbsd-7-nhusb
	sys/dev/usb/auvitek_i2c.c: netbsd-7-nhusb
	sys/dev/usb/auvitek_video.c: netbsd-7-nhusb
	sys/dev/usb/auvitekvar.h: netbsd-7-nhusb
	sys/dev/usb/ehci.c: netbsd-7-nhusb
	sys/dev/usb/ehcireg.h: netbsd-7-nhusb
	sys/dev/usb/ehcivar.h: netbsd-7-nhusb
	sys/dev/usb/emdtv.c: netbsd-7-nhusb
	sys/dev/usb/emdtv_dtv.c: netbsd-7-nhusb
	sys/dev/usb/emdtv_ir.c: netbsd-7-nhusb
	sys/dev/usb/emdtvvar.h: netbsd-7-nhusb
	sys/dev/usb/ezload.c: netbsd-7-nhusb
	sys/dev/usb/ezload.h: netbsd-7-nhusb
	sys/dev/usb/files.usb: netbsd-7-nhusb
	sys/dev/usb/hid.c: netbsd-7-nhusb
	sys/dev/usb/hid.h: netbsd-7-nhusb
	sys/dev/usb/if_athn_usb.c: netbsd-7-nhusb
	sys/dev/usb/if_athn_usb.h: netbsd-7-nhusb
	sys/dev/usb/if_atu.c: netbsd-7-nhusb
	sys/dev/usb/if_atureg.h: netbsd-7-nhusb
	sys/dev/usb/if_aue.c: netbsd-7-nhusb
	sys/dev/usb/if_auereg.h: netbsd-7-nhusb
	sys/dev/usb/if_axe.c: netbsd-7-nhusb
	sys/dev/usb/if_axen.c: netbsd-7-nhusb
	sys/dev/usb/if_axenreg.h: netbsd-7-nhusb
	sys/dev/usb/if_axereg.h: netbsd-7-nhusb
	sys/dev/usb/if_cdce.c: netbsd-7-nhusb
	sys/dev/usb/if_cdcereg.h: netbsd-7-nhusb
	sys/dev/usb/if_cue.c: netbsd-7-nhusb
	sys/dev/usb/if_cuereg.h: netbsd-7-nhusb
	sys/dev/usb/if_kue.c: netbsd-7-nhusb
	sys/dev/usb/if_kuereg.h: netbsd-7-nhusb
	sys/dev/usb/if_otus.c: netbsd-7-nhusb
	sys/dev/usb/if_otusvar.h: netbsd-7-nhusb
	sys/dev/usb/if_rum.c: netbsd-7-nhusb
	sys/dev/usb/if_rumreg.h: netbsd-7-nhusb
	sys/dev/usb/if_rumvar.h: netbsd-7-nhusb
	sys/dev/usb/if_run.c: netbsd-7-nhusb
	sys/dev/usb/if_runvar.h: netbsd-7-nhusb
	sys/dev/usb/if_smsc.c: netbsd-7-nhusb
	sys/dev/usb/if_smscreg.h: netbsd-7-nhusb
	sys/dev/usb/if_smscvar.h: netbsd-7-nhusb
	sys/dev/usb/if_udav.c: netbsd-7-nhusb
	sys/dev/usb/if_udavreg.h: netbsd-7-nhusb
	sys/dev/usb/if_upgt.c: netbsd-7-nhusb
	sys/dev/usb/if_upgtvar.h: netbsd-7-nhusb
	sys/dev/usb/if_upl.c: netbsd-7-nhusb
	sys/dev/usb/if_ural.c: netbsd-7-nhusb
	sys/dev/usb/if_uralreg.h: netbsd-7-nhusb
	sys/dev/usb/if_uralvar.h: netbsd-7-nhusb
	sys/dev/usb/if_url.c: netbsd-7-nhusb
	sys/dev/usb/if_urlreg.h: netbsd-7-nhusb
	sys/dev/usb/if_urndis.c: netbsd-7-nhusb
	sys/dev/usb/if_urndisreg.h: netbsd-7-nhusb
	sys/dev/usb/if_urtw.c: netbsd-7-nhusb
	sys/dev/usb/if_urtwn.c: netbsd-7-nhusb
	sys/dev/usb/if_urtwn_data.h: netbsd-7-nhusb
	sys/dev/usb/if_urtwnreg.h: netbsd-7-nhusb
	sys/dev/usb/if_urtwnvar.h: netbsd-7-nhusb
	sys/dev/usb/if_urtwreg.h: netbsd-7-nhusb
	sys/dev/usb/if_zyd.c: netbsd-7-nhusb
	sys/dev/usb/if_zydreg.h: netbsd-7-nhusb
	sys/dev/usb/irmce.c: netbsd-7-nhusb
	sys/dev/usb/moscom.c: netbsd-7-nhusb
	sys/dev/usb/motg.c: netbsd-7-nhusb
	sys/dev/usb/motgvar.h: netbsd-7-nhusb
	sys/dev/usb/ohci.c: netbsd-7-nhusb
	sys/dev/usb/ohcireg.h: netbsd-7-nhusb
	sys/dev/usb/ohcivar.h: netbsd-7-nhusb
	sys/dev/usb/pseye.c: netbsd-7-nhusb
	sys/dev/usb/slurm.c: netbsd-7-nhusb
	sys/dev/usb/stuirda.c: netbsd-7-nhusb
	sys/dev/usb/u3g.c: netbsd-7-nhusb
	sys/dev/usb/uark.c: netbsd-7-nhusb
	sys/dev/usb/uatp.c: netbsd-7-nhusb
	sys/dev/usb/uaudio.c: netbsd-7-nhusb
	sys/dev/usb/uberry.c: netbsd-7-nhusb
	sys/dev/usb/ubsa.c: netbsd-7-nhusb
	sys/dev/usb/ubsa_common.c: netbsd-7-nhusb
	sys/dev/usb/ubsavar.h: netbsd-7-nhusb
	sys/dev/usb/ubt.c: netbsd-7-nhusb
	sys/dev/usb/uchcom.c: netbsd-7-nhusb
	sys/dev/usb/ucom.c: netbsd-7-nhusb
	sys/dev/usb/ucomvar.h: netbsd-7-nhusb
	sys/dev/usb/ucycom.c: netbsd-7-nhusb
	sys/dev/usb/udl.c: netbsd-7-nhusb
	sys/dev/usb/udl.h: netbsd-7-nhusb
	sys/dev/usb/udsbr.c: netbsd-7-nhusb
	sys/dev/usb/udsir.c: netbsd-7-nhusb
	sys/dev/usb/uep.c: netbsd-7-nhusb
	sys/dev/usb/uftdi.c: netbsd-7-nhusb
	sys/dev/usb/uftdireg.h: netbsd-7-nhusb
	sys/dev/usb/ugen.c: netbsd-7-nhusb
	sys/dev/usb/ugensa.c: netbsd-7-nhusb
	sys/dev/usb/uhci.c: netbsd-7-nhusb
	sys/dev/usb/uhcireg.h: netbsd-7-nhusb
	sys/dev/usb/uhcivar.h: netbsd-7-nhusb
	sys/dev/usb/uhid.c: netbsd-7-nhusb
	sys/dev/usb/uhidev.c: netbsd-7-nhusb
	sys/dev/usb/uhidev.h: netbsd-7-nhusb
	sys/dev/usb/uhmodem.c: netbsd-7-nhusb
	sys/dev/usb/uhso.c: netbsd-7-nhusb
	sys/dev/usb/uhub.c: netbsd-7-nhusb
	sys/dev/usb/uipad.c: netbsd-7-nhusb
	sys/dev/usb/uipaq.c: netbsd-7-nhusb
	sys/dev/usb/uirda.c: netbsd-7-nhusb
	sys/dev/usb/uirdavar.h: netbsd-7-nhusb
	sys/dev/usb/ukbd.c: netbsd-7-nhusb
	sys/dev/usb/ukbdmap.c: netbsd-7-nhusb
	sys/dev/usb/ukyopon.c: netbsd-7-nhusb
	sys/dev/usb/ukyopon.h: netbsd-7-nhusb
	sys/dev/usb/ulpt.c: netbsd-7-nhusb
	sys/dev/usb/umass.c: netbsd-7-nhusb
	sys/dev/usb/umass_isdata.c: netbsd-7-nhusb
	sys/dev/usb/umass_isdata.h: netbsd-7-nhusb
	sys/dev/usb/umass_quirks.c: netbsd-7-nhusb
	sys/dev/usb/umass_quirks.h: netbsd-7-nhusb
	sys/dev/usb/umass_scsipi.c: netbsd-7-nhusb
	sys/dev/usb/umass_scsipi.h: netbsd-7-nhusb
	sys/dev/usb/umassvar.h: netbsd-7-nhusb
	sys/dev/usb/umcs.c: netbsd-7-nhusb
	sys/dev/usb/umct.c: netbsd-7-nhusb
	sys/dev/usb/umidi.c: netbsd-7-nhusb
	sys/dev/usb/umidi_quirks.c: netbsd-7-nhusb
	sys/dev/usb/umidi_quirks.h: netbsd-7-nhusb
	sys/dev/usb/umodem.c: netbsd-7-nhusb
	sys/dev/usb/umodem_common.c: netbsd-7-nhusb
	sys/dev/usb/umodemvar.h: netbsd-7-nhusb
	sys/dev/usb/ums.c: netbsd-7-nhusb
	sys/dev/usb/uplcom.c: netbsd-7-nhusb
	sys/dev/usb/urio.c: netbsd-7-nhusb
	sys/dev/usb/urio.h: netbsd-7-nhusb
	sys/dev/usb/usb.c: netbsd-7-nhusb
	sys/dev/usb/usb.h: netbsd-7-nhusb
	sys/dev/usb/usb_mem.c: netbsd-7-nhusb
	sys/dev/usb/usb_mem.h: netbsd-7-nhusb
	sys/dev/usb/usb_quirks.c: netbsd-7-nhusb
	sys/dev/usb/usb_quirks.h: netbsd-7-nhusb
	sys/dev/usb/usb_subr.c: netbsd-7-nhusb
	sys/dev/usb/usbdevices.config: netbsd-7-nhusb
	sys/dev/usb/usbdevs: netbsd-7-nhusb
	sys/dev/usb/usbdevs.h: netbsd-7-nhusb
	sys/dev/usb/usbdevs_data.h: netbsd-7-nhusb
	sys/dev/usb/usbdi.c: netbsd-7-nhusb
	sys/dev/usb/usbdi.h: netbsd-7-nhusb
	sys/dev/usb/usbdi_util.c: netbsd-7-nhusb
	sys/dev/usb/usbdi_util.h: netbsd-7-nhusb
	sys/dev/usb/usbdivar.h: netbsd-7-nhusb
	sys/dev/usb/usbhid.h: netbsd-7-nhusb
	sys/dev/usb/usbhist.h: netbsd-7-nhusb
	sys/dev/usb/usbroothub.c: netbsd-7-nhusb
	sys/dev/usb/usbroothub.h: netbsd-7-nhusb
	sys/dev/usb/usbroothub_subr.c: delete
	sys/dev/usb/usbroothub_subr.h: delete
	sys/dev/usb/uscanner.c: netbsd-7-nhusb
	sys/dev/usb/uslsa.c: netbsd-7-nhusb
	sys/dev/usb/usscanner.c: netbsd-7-nhusb
	sys/dev/usb/ustir.c: netbsd-7-nhusb
	sys/dev/usb/uthum.c: netbsd-7-nhusb
	sys/dev/usb/utoppy.c: netbsd-7-nhusb
	sys/dev/usb/uts.c: netbsd-7-nhusb
	sys/dev/usb/uvideo.c: netbsd-7-nhusb
	sys/dev/usb/uvisor.c: netbsd-7-nhusb
	sys/dev/usb/uvscom.c: netbsd-7-nhusb
	sys/dev/usb/uyap.c: netbsd-7-nhusb
	sys/dev/usb/uyap_firmware.h: netbsd-7-nhusb
	sys/dev/usb/uyurex.c: netbsd-7-nhusb
	sys/dev/usb/x1input_rdesc.h: netbsd-7-nhusb
	sys/dev/usb/xhci.c: netbsd-7-nhusb
	sys/dev/usb/xhcireg.h: netbsd-7-nhusb
	sys/dev/usb/xhcivar.h: netbsd-7-nhusb
	sys/dev/usb/xinput_rdesc.h: netbsd-7-nhusb
	sys/external/bsd/common/conf/files.linux: netbsd-7-nhusb
	sys/external/bsd/common/include/linux/err.h: netbsd-7-nhusb
	sys/external/bsd/common/include/linux/kernel.h: netbsd-7-nhusb
	sys/external/bsd/common/include/linux/workqueue.h: netbsd-7-nhusb
	sys/external/bsd/common/linux/linux_work.c: netbsd-7-nhusb
	sys/external/bsd/drm2/dist/drm/radeon/atombios_encoders.c: netbsd-7-nhusb
	sys/external/bsd/drm2/dist/drm/radeon/radeon_legacy_encoders.c: netbsd-7-nhusb
	sys/external/bsd/drm2/drm/files.drmkms: netbsd-7-nhusb
	sys/external/bsd/drm2/i915drm/files.i915drmkms: netbsd-7-nhusb
	sys/external/bsd/drm2/include/linux/err.h: delete
	sys/external/bsd/drm2/include/linux/workqueue.h: delete
	sys/external/bsd/drm2/linux/files.drmkms_linux: netbsd-7-nhusb
	sys/external/bsd/drm2/linux/linux_work.c: delete
	sys/external/bsd/dwc2/dwc2.c: netbsd-7-nhusb
	sys/external/bsd/dwc2/dwc2.h: netbsd-7-nhusb
	sys/external/bsd/dwc2/dwc2var.h: netbsd-7-nhusb
	sys/external/bsd/dwc2/dwctwo2netbsd: netbsd-7-nhusb
	sys/external/bsd/dwc2/conf/files.dwc2: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_core.c: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_core.h: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_coreintr.c: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_hcd.c: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_hcd.h: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_hcdddma.c: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_hcdintr.c: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_hcdqueue.c: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_hw.h: netbsd-7-nhusb
	sys/modules/drmkms_linux/Makefile: netbsd-7-nhusb
	sys/modules/i915drmkms/Makefile: netbsd-7-nhusb
	sys/rump/dev/lib/libugenhc/ugenhc.c: netbsd-7-nhusb
	sys/rump/dev/lib/libusb/Makefile: netbsd-7-nhusb
	sys/rump/dev/lib/libusb/USB.ioconf: netbsd-7-nhusb
	sys/rump/dev/lib/libusb/usb_at_ugenhc.c: delete
	sys/rump/dev/lib/libusb/opt/opt_usb.h: delete
	sys/rump/dev/lib/libusb/opt/opt_usbverbose.h: delete
	sys/sys/mbuf.h: netbsd-7-nhusb
	usr.sbin/usbdevs/usbdevs.8: netbsd-7-nhusb
	usr.sbin/usbdevs/usbdevs.c: netbsd-7-nhusb
Merge netbsd-7-nhusb:
- API / infrastructure changes to support memory management changes.
- Memory management improvements and bug fixes.
- HCDs should now be MP safe
- conversion to KERNHIST based debug
- FS/LS isoc support on ehci(4).
- conversion to kmem(9)
- Some USB 3 support - mostly from Takahiro HAYASHI (t-hash).
- interrupt transfers now get proper DMA operations
- general bug fixes
     - kern/48308
     - uhub status notification improvements
     - umass(4) probe fix (applied to HEAD already)
     - ohci(4) short transfer fix
- Change the SOFTINT level from NET to SERIAL for the USB softint handler.
  This gives the callback a chance of running when another softint handler
  at SOFTINT_NET has blocked holding a lock, e.g. softnet_lock and most of
  the network stack.
     - kern/49065 - ifconfig tun0 ... sequence locks up system / lockup:
       softnet_lock held across usb xfr
     - kern/50491 - unkillable wait in usbd_transfer while using usmsc0
       on raspberry pi 2
     - kern/51395 - USB Ethernet makes xhci hang
- Various improvements to slhci(4)
- Various improvements to dwc2(4)

Revision 1.6.4.2.4.3 / (download) - annotate - [select for diffs], Fri Mar 31 10:05:07 2017 UTC (5 years, 10 months ago) by skrll
Branch: netbsd-7-nhusb
Changes since 1.6.4.2.4.2: +3 -3 lines
Diff to previous 1.6.4.2.4.2 (colored) to branchpoint 1.6.4.2 (colored) next main 1.6.4.3 (colored)

Whitespace

Revision 1.6.4.2.4.2 / (download) - annotate - [select for diffs], Thu Jan 26 21:54:24 2017 UTC (6 years ago) by skrll
Branch: netbsd-7-nhusb
Changes since 1.6.4.2.4.1: +5 -6 lines
Diff to previous 1.6.4.2.4.1 (colored) to branchpoint 1.6.4.2 (colored)

Sync with HEAD/nhusb

Revision 1.12.2.32 / (download) - annotate - [select for diffs], Tue Dec 27 10:09:24 2016 UTC (6 years, 1 month ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.31: +2 -3 lines
Diff to previous 1.12.2.31 (colored) to branchpoint 1.12 (colored) next main 1.13 (colored)

Stray #endif

Revision 1.12.2.31 / (download) - annotate - [select for diffs], Tue Dec 27 08:49:29 2016 UTC (6 years, 1 month ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.30: +5 -5 lines
Diff to previous 1.12.2.30 (colored) to branchpoint 1.12 (colored)

#ifdef DIAGNOSTIC + panic -> KASSERTMSG

Revision 1.6.4.2.4.1 / (download) - annotate - [select for diffs], Tue Sep 6 20:33:09 2016 UTC (6 years, 5 months ago) by skrll
Branch: netbsd-7-nhusb
Changes since 1.6.4.2: +534 -802 lines
Diff to previous 1.6.4.2 (colored)

First pass at netbsd-7 updated with USB code from HEAD

Revision 1.12.2.30 / (download) - annotate - [select for diffs], Sat Jul 9 20:25:15 2016 UTC (6 years, 7 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.29: +4 -4 lines
Diff to previous 1.12.2.29 (colored) to branchpoint 1.12 (colored)

Sync with HEAD

Revision 1.17 / (download) - annotate - [select for diffs], Sun Jun 5 18:46:03 2016 UTC (6 years, 8 months ago) by jakllsch
Branch: MAIN
CVS Tags: prg-localcount2-base3, prg-localcount2-base2, prg-localcount2-base1, prg-localcount2-base, prg-localcount2, pgoyette-localcount-base, pgoyette-localcount-20170426, pgoyette-localcount-20170320, pgoyette-localcount-20170107, pgoyette-localcount-20161104, pgoyette-localcount-20160806, pgoyette-localcount-20160726, pgoyette-localcount, perseant-stdc-iso10646-base, perseant-stdc-iso10646, nick-nhusb-base-20170825, nick-nhusb-base-20170204, nick-nhusb-base-20161204, nick-nhusb-base-20161004, nick-nhusb-base-20160907, netbsd-8-base, localcount-20160914, jdolecek-ncq-base, jdolecek-ncq, bouyer-socketcan-base1, bouyer-socketcan-base, bouyer-socketcan
Branch point for: netbsd-8
Changes since 1.16: +4 -4 lines
Diff to previous 1.16 (colored)

Use MUSB2_REG_RXNAKLIMIT instead of MUSB2_REG_TXNAKLIMIT in the recieve path.

XXX MUSB2_REG_RXNAKLIMIT in awin_otgreg.h is probably wrong.

Revision 1.12.2.29 / (download) - annotate - [select for diffs], Sun May 29 08:44:31 2016 UTC (6 years, 8 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.28: +3 -44 lines
Diff to previous 1.12.2.28 (colored) to branchpoint 1.12 (colored)

Sync with HEAD

Revision 1.16 / (download) - annotate - [select for diffs], Fri May 6 13:03:06 2016 UTC (6 years, 9 months ago) by skrll
Branch: MAIN
CVS Tags: nick-nhusb-base-20160529
Changes since 1.15: +2 -43 lines
Diff to previous 1.15 (colored)

usb is attached with config_interrupts so we can G/C the code to support
transfers when this wasn't the case.

Revision 1.15 / (download) - annotate - [select for diffs], Sat Apr 23 18:54:42 2016 UTC (6 years, 9 months ago) by skrll
Branch: MAIN
Changes since 1.14: +3 -3 lines
Diff to previous 1.14 (colored)

Fix KASSERT

Revision 1.14 / (download) - annotate - [select for diffs], Sat Apr 23 10:15:32 2016 UTC (6 years, 9 months ago) by skrll
Branch: MAIN
Changes since 1.13: +540 -767 lines
Diff to previous 1.13 (colored)

Merge nick-nhusb

- API / infrastructure changes to support memory management changes.
- Memory management improvements and bug fixes.
- HCDs should now be MP safe
- conversion to KERNHIST based debug
- FS/LS isoc support on ehci(4).
- conversion to kmem(9)
- Some USB 3 support - mostly from Takahiro HAYASHI (t-hash).
- interrupt transfers now get proper DMA operations
- general bug fixes
    - kern/48308
    - uhub status notification improvements
    - umass(4) probe fix (applied to HEAD already)
    - ohci(4) short transfer fix

Revision 1.12.2.28 / (download) - annotate - [select for diffs], Sat Feb 6 08:53:03 2016 UTC (7 years ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.27: +7 -4 lines
Diff to previous 1.12.2.27 (colored) to branchpoint 1.12 (colored)

#include "opt_*" corrections

Revision 1.12.2.27 / (download) - annotate - [select for diffs], Wed Dec 23 08:07:40 2015 UTC (7 years, 1 month ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.26: +3 -3 lines
Diff to previous 1.12.2.26 (colored) to branchpoint 1.12 (colored)

Revert previous... I got ahead of myself

Revision 1.12.2.26 / (download) - annotate - [select for diffs], Wed Dec 23 07:59:19 2015 UTC (7 years, 1 month ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.25: +3 -3 lines
Diff to previous 1.12.2.25 (colored) to branchpoint 1.12 (colored)

Transfer are only ever allocated from thread context now.  Change IPL_USB
to IPL_NONE in pool_cache_init for the xfer struct pool.

Revision 1.12.2.25 / (download) - annotate - [select for diffs], Sat Dec 19 09:59:03 2015 UTC (7 years, 1 month ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.24: +11 -30 lines
Diff to previous 1.12.2.24 (colored) to branchpoint 1.12 (colored)

Use KASSERT* instead of panic wrapped in #ifdef DIAGNOSTIC / #endif

Revision 1.12.2.24 / (download) - annotate - [select for diffs], Sat Dec 19 09:56:41 2015 UTC (7 years, 1 month ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.23: +3 -5 lines
Diff to previous 1.12.2.23 (colored) to branchpoint 1.12 (colored)

use __diagused

Revision 1.12.2.23 / (download) - annotate - [select for diffs], Sat Dec 19 09:55:07 2015 UTC (7 years, 1 month ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.22: +20 -20 lines
Diff to previous 1.12.2.22 (colored) to branchpoint 1.12 (colored)

Provide and use a MOTG_PIPE2MPIPE helper macro

Revision 1.12.2.22 / (download) - annotate - [select for diffs], Sat Dec 19 09:47:57 2015 UTC (7 years, 1 month ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.21: +3 -3 lines
Diff to previous 1.12.2.21 (colored) to branchpoint 1.12 (colored)

Whitespace.

Revision 1.12.2.21 / (download) - annotate - [select for diffs], Tue Oct 20 15:31:21 2015 UTC (7 years, 3 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.20: +26 -26 lines
Diff to previous 1.12.2.20 (colored) to branchpoint 1.12 (colored)

Consistently providei/use *_{XFER,PIPE,BUS}2SC, etc macros

Revision 1.12.2.20 / (download) - annotate - [select for diffs], Tue Oct 20 15:17:54 2015 UTC (7 years, 3 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.19: +2 -7 lines
Diff to previous 1.12.2.19 (colored) to branchpoint 1.12 (colored)

g/c some unused stuff.

Revision 1.12.2.19 / (download) - annotate - [select for diffs], Sun Oct 11 09:17:51 2015 UTC (7 years, 4 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.18: +5 -4 lines
Diff to previous 1.12.2.18 (colored) to branchpoint 1.12 (colored)

Update ubm_allocx with the isoc frame count parameter and use it in
dwctwo(4)

Revision 1.12.2.18 / (download) - annotate - [select for diffs], Tue Sep 22 12:06:01 2015 UTC (7 years, 4 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.17: +3 -3 lines
Diff to previous 1.12.2.17 (colored) to branchpoint 1.12 (colored)

Sync with HEAD

Revision 1.13 / (download) - annotate - [select for diffs], Wed Aug 19 06:23:35 2015 UTC (7 years, 5 months ago) by skrll
Branch: MAIN
CVS Tags: nick-nhusb-base-20160422, nick-nhusb-base-20160319, nick-nhusb-base-20151226, nick-nhusb-base-20150921
Changes since 1.12: +3 -3 lines
Diff to previous 1.12 (colored)

More IPL_SCHED -> IPL_USB

Revision 1.12.2.17 / (download) - annotate - [select for diffs], Thu Mar 19 17:26:43 2015 UTC (7 years, 10 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.16: +68 -68 lines
Diff to previous 1.12.2.16 (colored) to branchpoint 1.12 (colored)

Do the same as OpenBSD and get rid of the *_handle typedefs and use
plain structures insteads

Revision 1.12.2.16 / (download) - annotate - [select for diffs], Mon Mar 9 14:26:31 2015 UTC (7 years, 11 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.15: +183 -135 lines
Diff to previous 1.12.2.15 (colored) to branchpoint 1.12 (colored)

Convert to USBHIST

Revision 1.12.2.15 / (download) - annotate - [select for diffs], Mon Mar 9 14:24:17 2015 UTC (7 years, 11 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.14: +2 -3 lines
Diff to previous 1.12.2.14 (colored) to branchpoint 1.12 (colored)

Remove a header that isn't needed.

Revision 1.12.2.14 / (download) - annotate - [select for diffs], Sun Mar 8 15:31:18 2015 UTC (7 years, 11 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.13: +8 -7 lines
Diff to previous 1.12.2.13 (colored) to branchpoint 1.12 (colored)

KNF

Revision 1.12.2.13 / (download) - annotate - [select for diffs], Sun Feb 1 12:08:15 2015 UTC (8 years ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.12: +2 -3 lines
Diff to previous 1.12.2.12 (colored) to branchpoint 1.12 (colored)

Remove unused #includes

Revision 1.12.2.12 / (download) - annotate - [select for diffs], Sat Dec 6 09:07:59 2014 UTC (8 years, 2 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.11: +3 -2 lines
Diff to previous 1.12.2.11 (colored) to branchpoint 1.12 (colored)

Set ub_usedma to false.

Revision 1.12.2.11 / (download) - annotate - [select for diffs], Fri Dec 5 13:23:38 2014 UTC (8 years, 2 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.10: +6 -6 lines
Diff to previous 1.12.2.10 (colored) to branchpoint 1.12 (colored)

Use int for return type for [eou]chi_init and motg_init.

Revision 1.12.2.10 / (download) - annotate - [select for diffs], Fri Dec 5 09:37:49 2014 UTC (8 years, 2 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.9: +23 -23 lines
Diff to previous 1.12.2.9 (colored) to branchpoint 1.12 (colored)

KNF. Remove ( ) from return statements.

Revision 1.12.2.9 / (download) - annotate - [select for diffs], Thu Dec 4 08:04:31 2014 UTC (8 years, 2 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.8: +65 -294 lines
Diff to previous 1.12.2.8 (colored) to branchpoint 1.12 (colored)

Rework roothub control transfers so that much of the code is shared
across HCDs.

I have retained the vendor/product reporting for each HCD for now,
but it maybe get removed later.

ahci(4) now reports a language table and uses the usb_makestrdesc
function instead of rolling its own version.

Revision 1.12.2.8 / (download) - annotate - [select for diffs], Wed Dec 3 23:05:06 2014 UTC (8 years, 2 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.7: +3 -3 lines
Diff to previous 1.12.2.7 (colored) to branchpoint 1.12 (colored)

Rename usbroothub_subr.[ch] to usbroothub.[ch]

Revision 1.12.2.7 / (download) - annotate - [select for diffs], Wed Dec 3 22:42:41 2014 UTC (8 years, 2 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.6: +49 -45 lines
Diff to previous 1.12.2.6 (colored) to branchpoint 1.12 (colored)

Use designated initialisers.  No functional change.

Revision 1.12.2.6 / (download) - annotate - [select for diffs], Wed Dec 3 12:52:07 2014 UTC (8 years, 2 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.5: +178 -178 lines
Diff to previous 1.12.2.5 (colored) to branchpoint 1.12 (colored)

The grand renaming of structure members.

No functional change.

Revision 1.12.2.5 / (download) - annotate - [select for diffs], Tue Dec 2 09:00:33 2014 UTC (8 years, 2 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.4: +6 -33 lines
Diff to previous 1.12.2.4 (colored) to branchpoint 1.12 (colored)

Step #1 of memory allocation re-organisation.

Centralised the buffer allocation routine which now supports DMA
and non-DMA capable host controllers.  Remove the
ubm_{alloc,free}m methods from usbd_bus_methods.

The buffer allocation is only allowed in thread context and,
therefore, negates the usefulness of the reserve dma code which
is removed in this change.

USBD_NO_COPY is also no longer required as usbd_transfer and
usbd_transfer_complete now track buffer usage and handle any
copying.

Revision 1.12.2.4 / (download) - annotate - [select for diffs], Mon Dec 1 12:38:39 2014 UTC (8 years, 2 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.3: +35 -35 lines
Diff to previous 1.12.2.3 (colored) to branchpoint 1.12 (colored)

Add prefixes to method structures member names. No functional change.

Revision 1.12.2.3 / (download) - annotate - [select for diffs], Mon Dec 1 08:12:09 2014 UTC (8 years, 2 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.2: +2 -3 lines
Diff to previous 1.12.2.2 (colored) to branchpoint 1.12 (colored)

Remove usbd_bus no_intrs member it was (virtually) unused.

Revision 1.12.2.2 / (download) - annotate - [select for diffs], Sun Nov 30 13:14:11 2014 UTC (8 years, 2 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.2.1: +13 -13 lines
Diff to previous 1.12.2.1 (colored) to branchpoint 1.12 (colored)

Whitespace

Revision 1.12.2.1 / (download) - annotate - [select for diffs], Sun Nov 30 12:18:58 2014 UTC (8 years, 2 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12: +8 -8 lines
Diff to previous 1.12 (colored)

Use C99 types. u_int{8,16,32,64}_t to uint{8,16,32,64}_t.

No functional change.

Revision 1.6.4.2 / (download) - annotate - [select for diffs], Wed Nov 12 19:54:46 2014 UTC (8 years, 2 months ago) by martin
Branch: netbsd-7
CVS Tags: netbsd-7-nhusb-base-20170116, netbsd-7-nhusb-base, netbsd-7-1-RELEASE, netbsd-7-1-RC2, netbsd-7-1-RC1, netbsd-7-1-2-RELEASE, netbsd-7-1-1-RELEASE, netbsd-7-1, netbsd-7-0-RELEASE, netbsd-7-0-RC3, netbsd-7-0-RC2, netbsd-7-0-RC1, netbsd-7-0-2-RELEASE, netbsd-7-0-1-RELEASE, netbsd-7-0
Branch point for: netbsd-7-nhusb
Changes since 1.6.4.1: +40 -17 lines
Diff to previous 1.6.4.1 (colored) to branchpoint 1.6 (colored)

Pull up following revision(s) (requested by skrll in ticket #222):
	etc/etc.evbarm/Makefile.inc			1.64
	sys/arch/evbarm/conf/BPI			1.2,1.4,1.6-1.7,1.9
	sys/arch/evbarm/conf/BPI_INSTALL		1.1
	sys/arch/evbarm/conf/CUBIEBOARD			1.18-1.30
	sys/arch/evbarm/conf/CUBIETRUCK			1.4,1.6
	sys/arch/evbarm/conf/mk.awin			1.4
	sys/arch/evbarm/conf/std.awin			1.4 (via patch)
	sys/conf/files					1.1104
	sys/dev/usb/motg.c				1.9-1.12
	sys/dev/usb/motgreg.h				1.2-1.4
Allow attachment glue to override the number of endpoints
-
options MOTG_ALLWINNER to select the awin specific reg layout
options MOTG_ALLWINNER
-
Instead of polluting motgreg.h with AllWinner specific registers (things
were getting out of hand), move the AllWinner reg definitions to
arch/arm/allwinner/awin_otgreg.h and include that instead of
dev/usb/motgreg.h when MOTG_ALLWINNER is defined.
let the bus driver override fifo size
-
If the bus driver supplies a fifo size and dynfifo is true, use it
-
Various kernel config fixes.

Revision 1.12 / (download) - annotate - [select for diffs], Sat Sep 13 19:02:00 2014 UTC (8 years, 4 months ago) by jmcneill
Branch: MAIN
CVS Tags: nick-nhusb-base-20150606, nick-nhusb-base-20150406, nick-nhusb-base
Branch point for: nick-nhusb
Changes since 1.11: +11 -7 lines
Diff to previous 1.11 (colored)

if the bus driver supplies a fifo size and dynfifo is true, use it

Revision 1.11 / (download) - annotate - [select for diffs], Sat Sep 13 18:36:39 2014 UTC (8 years, 4 months ago) by jmcneill
Branch: MAIN
Changes since 1.10: +9 -5 lines
Diff to previous 1.10 (colored)

let the bus driver override fifo size

Revision 1.10 / (download) - annotate - [select for diffs], Sat Sep 13 17:42:48 2014 UTC (8 years, 4 months ago) by jmcneill
Branch: MAIN
Changes since 1.9: +14 -3 lines
Diff to previous 1.9 (colored)

Instead of polluting motgreg.h with AllWinner specific registers (things
were getting out of hand), move the AllWinner reg definitions to
arch/arm/allwinner/awin_otgreg.h and include that instead of
dev/usb/motgreg.h when MOTG_ALLWINNER is defined.

Revision 1.9 / (download) - annotate - [select for diffs], Sat Sep 13 14:46:50 2014 UTC (8 years, 4 months ago) by jmcneill
Branch: MAIN
Changes since 1.8: +12 -8 lines
Diff to previous 1.8 (colored)

allow attachment glue to override the number of endpoints

Revision 1.8.2.2 / (download) - annotate - [select for diffs], Wed Aug 20 00:03:51 2014 UTC (8 years, 5 months ago) by tls
Branch: tls-maxphys
Changes since 1.8.2.1: +2460 -0 lines
Diff to previous 1.8.2.1 (colored)

Rebase to HEAD as of a few days ago.

Revision 1.6.4.1 / (download) - annotate - [select for diffs], Tue Aug 12 10:22:54 2014 UTC (8 years, 5 months ago) by martin
Branch: netbsd-7
Changes since 1.6: +72 -74 lines
Diff to previous 1.6 (colored)

Pull up following revision(s) (requested by skrll in ticket #6):
	sys/dev/usb/motg.c: revision 1.7
	sys/dev/usb/motg.c: revision 1.8
Trailing whitespace.
Make this compile when DIAGNOSTIC isn't defined.

Revision 1.8.2.1, Tue Aug 12 08:06:46 2014 UTC (8 years, 5 months ago) by tls
Branch: tls-maxphys
Changes since 1.8: +0 -2458 lines
FILE REMOVED

file motg.c was added on branch tls-maxphys on 2014-08-20 00:03:51 +0000

Revision 1.8 / (download) - annotate - [select for diffs], Tue Aug 12 08:06:46 2014 UTC (8 years, 5 months ago) by skrll
Branch: MAIN
Branch point for: tls-maxphys
Changes since 1.7: +7 -9 lines
Diff to previous 1.7 (colored)

Make this compile when DIAGNOSTIC isn't defined.

Revision 1.7 / (download) - annotate - [select for diffs], Tue Aug 12 08:06:07 2014 UTC (8 years, 5 months ago) by skrll
Branch: MAIN
Changes since 1.6: +67 -67 lines
Diff to previous 1.6 (colored)

Trailing whitespace.

Revision 1.6.2.2 / (download) - annotate - [select for diffs], Sun Aug 10 06:54:59 2014 UTC (8 years, 6 months ago) by tls
Branch: tls-earlyentropy
Changes since 1.6.2.1: +2460 -0 lines
Diff to previous 1.6.2.1 (colored) to branchpoint 1.6 (colored) next main 1.7 (colored)

Rebase.

Revision 1.6.2.1, Tue Aug 5 06:35:55 2014 UTC (8 years, 6 months ago) by tls
Branch: tls-earlyentropy
Changes since 1.6: +0 -2460 lines
FILE REMOVED

file motg.c was added on branch tls-earlyentropy on 2014-08-10 06:54:59 +0000

Revision 1.6 / (download) - annotate - [select for diffs], Tue Aug 5 06:35:55 2014 UTC (8 years, 6 months ago) by skrll
Branch: MAIN
CVS Tags: tls-maxphys-base, tls-earlyentropy-base, netbsd-7-base
Branch point for: tls-earlyentropy, netbsd-7
Changes since 1.5: +3 -3 lines
Diff to previous 1.5 (colored)

Whitespace.

Revision 1.5 / (download) - annotate - [select for diffs], Tue Aug 5 06:35:24 2014 UTC (8 years, 6 months ago) by skrll
Branch: MAIN
Changes since 1.4: +4 -7 lines
Diff to previous 1.4 (colored)

Simplify the freeing of the interrupt pipe transfer.  Inspired by OpenBSD.

Revision 1.4 / (download) - annotate - [select for diffs], Fri Jul 25 21:16:31 2014 UTC (8 years, 6 months ago) by joerg
Branch: MAIN
Changes since 1.3: +5 -2 lines
Diff to previous 1.3 (colored)

UREAD4 is unused.

Revision 1.3 / (download) - annotate - [select for diffs], Sat Jul 19 22:08:54 2014 UTC (8 years, 6 months ago) by bouyer
Branch: MAIN
Changes since 1.2: +153 -111 lines
Diff to previous 1.2 (colored)

Disable NAK timeout on bulk transfers, I couldn't find a way to clear
the NAK bit not the FIFO.
Make xfer aborts more robust to races, by setting proper status and flags
in xfer.

Revision 1.2 / (download) - annotate - [select for diffs], Thu Jul 17 19:58:18 2014 UTC (8 years, 6 months ago) by bouyer
Branch: MAIN
Changes since 1.1: +17 -7 lines
Diff to previous 1.1 (colored)

Try to recover from vbus errors. Some devices draw too much
current at plug time, causing a trancient error.

Revision 1.1 / (download) - annotate - [select for diffs], Wed Jul 16 18:22:23 2014 UTC (8 years, 6 months ago) by bouyer
Branch: MAIN

Add motg(4), a driver for Mentor Graphic's OTG USB controller IP,
as found in several SoCs.
Only host mode is supported, good enough for umass (USB keys), kubd and ums,
and USB2 hubs.
It fails to properly talk to USB/serial adapters at this time.

This form allows you to request diff's between any two revisions of a file. You may select a symbolic revision name using the selection box or you may type in a numeric name using the type-in text box.




CVSweb <webmaster@jp.NetBSD.org>