CVS log for src/sys/dev/usb/if_cdce.c

Up to [cvs.NetBSD.org] / src / sys / dev / usb

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

Pull up following revision(s) (requested by rin in ticket #828):

	sys/dev/usb/if_cdce.c: revision 1.82

There is no link state for CDCE. Pretend that the link is always up so that
programs like dhcpcd will handle the interface.

There is no link state for CDCE. Pretend that the link is always up so that
programs like dhcpcd will handle the interface.

usbnet: Omit needless detachcv name parameter to usbnet_attach.

usbnet: Omit empty uno_init functions.

usbnet: Factor usbnet_init_rx_tx out into usbnet_if_init.

Make it private; no need for drivers to call it any more.

usbnet drivers: Simplify return of usbnet_init_rx_tx.

usbnet: Handle usbnet_set_link for drivers with no media detect.

usbnet drivers: From *_uno_init, call *_uno_stop, not usbnet_stop.

Make usbnet_stop private now that no drivers use it.

None of the driver-independent logic in usbnet_stop has any effect at
this point because we are guaranteed not to be running, so only the
driver-dependent logic in *_uno_stop (at most) is needed.

For drivers with no *_uno_stop, just omit the call to usbnet_stop
altogether.

Some of this logic is obviously redundant with the subsequent call to
*_reset -- to be addressed in a subsequent commit.

usbnet drivers: Omit needless isdying tests in *_uno_init.

usbnet(9) already checks this immediately before calling *_uno_init.

usbnet: Make the tx/rx locks private to usbnet.c.

Suffice it for the drivers to know that uno_tx_prepare and
uno_rx_loop have exclusive access to the chain, and, for tx,
exclusive access to the mbuf.

usbnet: Enter uno_init with the core lock held.

This reduces code in all drivers except urndis(4) and aue(4).

However, it's still safe for urndis to drop the core lock because the
ifnet is locked, and the ifnet lock covers the DOWN->UP (uno_init)
and UP->DOWN (uno_stop) transitions.

hardclock_ticks -> getticks()

Pull up following revision(s) (requested by skrll in ticket #896):

	sys/dev/usb/if_cdce.c: revision 1.71

Search the descriptors of the appropriate interface to ensure correct
match.

PR kern/55240 cdce(4) error "no data interface" when ECM USB IF are
preceded by ACM USB IF

Search the descriptors of the appropriate interface to ensure correct
match.

PR kern/55240 cdce(4) error "no data interface" when ECM USB IF are
preceded by ACM USB IF

Mostly merge changes from HEAD upto 20200411

Define and implement a locking protocol for the ifmedia / mii layers:
- MP-safe drivers provide a mutex to ifmedia that is used to serialize
  access to media-related structures / hardware regsiters.  Converted
  drivers use the new ifmedia_init_with_lock() function for this.  The
  new name is provided to ease the transition.
- Un-converted drivers continue to call ifmedia_init(), which will supply
  a compatibility lock to be used instead.  Several media-related entry
  points must be aware of this compatibility lock, and are able to acquire
  it recursively a limited number of times, if needed.  This is a SPIN
  mutex with priority IPL_NET.
- This same lock is used to serialize access to PHY registers and other
  MII-related data structures.

The PHY drivers are modified to acquire and release the lock, as needed,
and assert the lock is held as a diagnostic aid.

The "usbnet" framework has had an overhaul of its internal locking
protocols to fit in with the media / mii changes, and the drivers adapted.

USB wifi drivers have been changed to provide their own adaptive mutex
to the ifmedia later via a new ieee80211_media_init_with_lock() function.
This is required because the USB drivers need an adaptive mutex.

Besised "usbnet", a few other drivers are converted: vmx, wm, ixgbe / ixv.

mcx also now calls ifmedia_init_with_lock() because it needs to also use
an adaptive mutex.  The mcx driver still needs to be fully converted to
NET_MPSAFE.

Sync with head.

Adopt <net/if_stats.h>.

Localify, constify.

Pull up following revision(s) (requested by mrg in ticket #135):

	distrib/sets/lists/comp/mi			1.2279
	distrib/sets/lists/modules/mi			1.123
	share/man/man9/Makefile				1.438
	share/man/man9/usbnet.9				1.1-1.9
	sys/dev/ic/rndisreg.h				1.3
	sys/dev/usb/TODO				1.47-1.52
	sys/dev/usb/TODO.usbmp				1.15,1.16
	sys/dev/usb/files.usb				1.157-1.167
	sys/dev/usb/if_aue.c				1.155-1.161
	sys/dev/usb/if_auereg.h				1.30-1.32
	sys/dev/usb/if_axe.c				1.103-1.119
	sys/dev/usb/if_axen.c				1.51-1.53,1.55-1.67
	sys/dev/usb/if_axenreg.h			1.15
	sys/dev/usb/if_cdce.c				1.54-1.67
	sys/dev/usb/if_cue.c				1.85,1.86
	sys/dev/usb/if_cuereg.h				1.23
	sys/dev/usb/if_kue.c				1.97-1.100
	sys/dev/usb/if_kuereg.h				1.23,1.24
	sys/dev/usb/if_mue.c				1.51-1.55
	sys/dev/usb/if_muereg.h				1.6
	sys/dev/usb/if_muevar.h				1.9
	sys/dev/usb/if_smsc.c				1.46-1.61
	sys/dev/usb/if_smscreg.h			1.6
	sys/dev/usb/if_smscvar.h			delete
	sys/dev/usb/if_udav.c				1.60-1.71
	sys/dev/usb/if_udavreg.h			1.14,1.15
	sys/dev/usb/if_upl.c				1.65,1.66
	sys/dev/usb/if_ure.c				1.15-1.31
	sys/dev/usb/if_urevar.h				1.4,1.5
	sys/dev/usb/if_url.c				1.67-1.70
	sys/dev/usb/if_urlreg.h				1.14
	sys/dev/usb/if_urndis.c				1.22-1.33
	sys/dev/usb/if_urtwn.c				1.72
	sys/dev/usb/ohci.c				1.290
	sys/dev/usb/uhub.c				1.143
	sys/dev/usb/usb.c				1.180
	sys/dev/usb/usb.h				1.118
	sys/dev/usb/usb_mem.c				1.71
	sys/dev/usb/usb_subr.c				1.238,1.239
	sys/dev/usb/usbdevs				1.772
	sys/dev/usb/usbdi.c				1.183,1.186
	sys/dev/usb/usbdi.h				1.97
	sys/dev/usb/usbdi_util.c			1.75
	sys/dev/usb/usbhist.h				1.5,1.6
	sys/dev/usb/usbnet.c				1.1-1.24
	sys/dev/usb/usbnet.h				1.1-1.14
	sys/dev/usb/usbroothub.c			1.9
	sys/dev/usb/xhci.c				1.109,1.110
	sys/modules/Makefile				1.223
	sys/modules/usbnet/Makefile			1.1

usbnet(9): Add common framework for USB network devices.
This bring various safety fixes to all updated drivers,
and includes locking clean up, detach safety when being
used or not, separate rx/tx locks to improve performance,
porting to NET_MPSAFE, many edge/error case bugs in
drivers fixed, as well as resovling PRs 54303 and 54308.
These drivers are converted: axe(4), axen(4), aue(4),
cdce(4), cue(4), kue(4), mue(4), smsc(4), udav(4),
upl(4), ure(4), url(4), and urndis(4).

couple more changes to usbnet(9):

- MII read/write reg return int instead of usbd_status (requested by skrll)
- usbnet_attach_ifp(9) changes arg, two mii-specific flags are placed by a
  pointer to new struct usbnet_mii.  if not NULL, then attach an MII to this
  interface like previous have_mii parameter.  use this to allow ure(4) to
  properly pass PHY location to mii_attach().

welcome netbsd 9.99.10.

- usbnet_rx_loop_cb's usbd_xfer parameter is never used and available
  in the usbnet_chain if needed.  remove it
- usbnet media status change already set link to false, don't repeat
  this in every driver
- don't clear link in stop, nothing was re-enabling it for non-MII
- add optional uno_tick_cb(struct usbnet *un) that is called from the
  usbnet tick timer
- remove wrong debug sysctl prototype

rx_loop and timer are kernel versions changes, but hopefully this is
the last one for usbnet.  working with 3 more drivers now (cue, mue
and url), leaving only aue, kue, upl and umb undone (aue may work
with previously supported devices, mine doesn't work with our driver,
kue and upl have patches for testing and umb is undone.)

introduce usbnet_set_dying().  will be used by url(4) conversion.
bump version.

introduce USBNET_MODULE() that encompasses almost all the module
specific code for usbnet modules.  they still need to include
the relevant ioconf.c, but everything else is now just, eg,

	USBNET_MODULE(axen)

Trailing whitespace

copy a pattern from if_udav.c, which already had "too much" check.

even though overflow or underflow is really unlikely here, reorder
various expressions to reduce the likelyhood even further.

in tx_prepare callback make sure to reject any mbuf that is larger
than can fit in the buffer.  done at the driver and not usbnet
layer because the driver knows how much beyond the mbuf data needs
to be sent (headers and trailers.)

axen(4) had a KASSERT() for this condition, but there's no
invariant here we can check so it's best as an error return.

XXX: only tested on these drivers, needs to be copied to udav, smsc
and urndis after testing as well as the not commited conversions.

reduce the scope of struct usbnet:
- move a large number of members internal to usbnet.c's new
  "struct usbnet_private".
- provide accessors for a few of these
- move struct usbnet_cdata into usbnet.c as well, but move
  bufsz, list count, and xfer flags back out into struct usbnet,
  and have them set as part of the setup efore usbnet_attach()
- split the intr pipe parts into their own structure
- move all the main usbnet*lock* code into usbnet.c too

usbnet_attach() goes down to 2 args, and the inputs needed are
now the full contents of 'struct usbnet' besides the driver
owned 'un_flags' and usbnet owned 'un_pri'.

welcome netbsd 9.99.6.

use new un_flags member of usbnet:
- axen(4) and cdce(4) are now able to use struct usbnet directly
  as softc, udav also done but untested

update usbnet some:
- move rx/tx xfer flags into usbnet_cdata
- move the callbacks into usbnet_ops structure
- move rx/tx xfer flags arguments from usbnet_init_rx_tx()
  and move them all into usbnet_attach() arguments
- s/miibus/mii/ in some places for consistency

other clean up:
- create wrapper functions for callbacks, move knowledge about
  special handling (OK to be missing, error eating) there.
- use cdata pointer if already available
- provide some more macros (will be real functions later) for
  accessing usbnet members, use existing ones more

bump kernel version.

for ethernet usb network devices, print the mac addr in usbnet.

extend usbnet to cope with if_upl, if_smsc, and if_umb needs:

- usbnet_enqueue() can set mbuf flags and csum_data
- usbnet_input() for non-ethernet based devices (upl, umb)
- allow a complete override for ioctl()
- remove converted list -- we have compiling and/or working patches for
  all the devices except for umb(4), will be merged as testing happens

hopefully this is the last ABI change, though  it may end up being
extended for additional smsc(4)  support.


hello for real netbsd 9.99.3!

- adjust usbnet interface to allow usbd_open_pipe_intr(), from the
  new comment:
	 * if un_intr_buf is not NULL, use usbd_open_pipe_intr() not
	 * usbd_open_pipe() for USBNET_ENDPT_INTR, with this buffer,
	 * size, and interval.
  the standard handling is in usbnet.c, with a callback to deal with
  the interrupt it self.  not fully tested, designed for if_aue.c
  and a few others not yet converted.
- make usbhist for usbnet.c work, thanks paulg
- usbnet_init_rx_tx() clears out all allocations upon failure now
- add usbnet_ec() to get a pointer to the struct ethercom
- add usbnet_{lock,unlock,owned}*() to lock/unlock the various locks
  and *owned*() for asserting

welcome 9.99.3!

couple of minor API updates:
- change the read/write register callbacks to have the same phy/reg
  order as the MII code.
- add "mii_flags" param to usbnet_attach_ifp().  axe(4) wants it.

also:
- add usbnet debug code, sysctl node support
- remove commented DPRINTF()s accidentally left in place
- add usbnet_softc()
- reorder some attach code to be consistent
- re-add USBD_FORCE_SHORT_XFER for axen rx chain

ride 9.99.2 bump.

introduce a library of common code / backends to share code between
USB ethernet drivers.

usbnet.h introduces a new set of APIs to provide common solutions
for these driver features:
 - USB endpoint pipe handling
 - rx and tx chain handling
 - generic handlers or support for several struct ifnet callbacks
 - MII bus locking
 - interrupt handling
 - partial autoconf handling: much of attach, and detach/activate
   can use common versions directly.

currently, only axen(4) and cdce(4) are converted.  the reductions
in these drivers are quite significant:  if_cdce.c is reduced from
1000 lines to 320 lines, and if_axen is reduced from 1902 lines
to 1021 lines.

add a "usbnet" module and make the if_axen module depend upon it.

remove unused structure members.  this brings most <foo>_chain and
<foo>_cdata structures into being identical for usb ethernet drivers.

upl(4) and url(4) need more work.

Whitespace

more smp cleanup for ure(4)/axen(4)/cdce(4):

- convert IFF_ALLMULTI to ETHER_F_ALLMULTI, using ETHER_LOCK()
- remove IFF_OACTIVE use, and simply check the ring count in start
- assert/take more locks
- XXX: IFF_RUNNING is not properly protected (all driver problem)
- fix axen_timer setting so it actually runs
- document a locking issue in stop callback:
  stop is called with the softc lock held, but the lock order
  in all other places is ifnet -> softc -> rx -> tx, so taking
  ifnet lock when softc lock is held would be problematic
- in rxeof check for stopping/dying more often.  i managed to
  trigger a pagefault in cdce_rxeof() when yanking an active
  device as it attempted to usbd_setup_xfer() on closed pipes.
- add missing USBD_MPSAFE and cdce_stopping resetting for cdce(4)

between this and other recent clean ups increase performance of
these drivers mostly.  some numbers (in mbit/sec):

	old:				new:
driver	in	out	in+out		in	out	in+out
----	--	---     ------		--	---	------
cdce	39	32	44		38	33	54
axen	44	34	45		48	37	42
ure	36	34	35		36	38	38

i'm not sure why axen drops a little with in+out.  cdce is
helped quite a lot, and ure a little.  it is disappointing that
ure does not outperform cdce -- it's the same actual hardware,
and the device-specific (ure) should outperform the generic
cdce driver...

make cdce(4) and ure(4) usb and mpsafe:

- introduce locking ala smsc(4)/axen(4) style
- convert to mpsafe interfaces
- add tick task to cdce(4) to deal with missing watchdog, and
  actually make the watchdog do something
- convert DELAY() to usbd_delay_ms() in cdce(4) and don't increase
  the time in a potentially unbounded way
- remove spl calls

tested with network cable and usb adapter pullouts, reboots and
many many GBs of data transferred in either direction under load.

s/Static/static/

move the software-only parts of cdce(4) out of if_cdcereg.h.

(if_cdcereg.h probably can go entirely.  it's almost empty,
but at least these definitions have some relationship with
the hardware bits.)

Sync with HEAD

remove explicit 'extern struct cfdriver <my>_cd;' and use ioconf.h

Sync with HEAD

 Implement the BPF direction filter (BIOC[GS]DIRECTION). It provides backward
compatibility with BIOC[GS]SEESENT ioctl. The userland interface is the same
as FreeBSD.

 This change also fixes a bug that the direction is misunderstand on some
environment by passing the direction to bpf_mtap*() instead of checking
m->m_pkthdr.rcvif.

Pull up following revision(s) (requested by skrll in ticket #1556):
	sys/dev/usb/if_athn_usb.c: 1.25
	sys/dev/usb/if_atu.c: 1.56
	sys/dev/usb/if_aue.c: 1.142
	sys/dev/usb/if_axe.c: 1.84
	sys/dev/usb/if_axen.c: 1.12
	sys/dev/usb/if_cdce.c: 1.45
	sys/dev/usb/if_cue.c: 1.77
	sys/dev/usb/if_kue.c: 1.91
	sys/dev/usb/if_otus.c: 1.32
	sys/dev/usb/if_rum.c: 1.59
	sys/dev/usb/if_run.c: 1.25
	sys/dev/usb/if_smsc.c: 1.33
	sys/dev/usb/if_udav.c: 1.52
	sys/dev/usb/if_upgt.c: 1.18
	sys/dev/usb/if_upl.c: 1.61
	sys/dev/usb/if_ural.c: 1.53
	sys/dev/usb/if_url.c: 1.57
	sys/dev/usb/if_urndis.c: 1.17
	sys/dev/usb/if_urtw.c: 1.14
	sys/dev/usb/if_urtwn.c: 1.56
	sys/dev/usb/if_zyd.c: 1.45
	sys/dev/usb/irmce.c: 1.4
	sys/dev/usb/pseye.c: 1.24
	sys/dev/usb/ubt.c: 1.60
	sys/dev/usb/ucom.c: 1.120
	sys/dev/usb/udsir.c: 1.6
	sys/dev/usb/ugen.c: 1.137
	sys/dev/usb/uhso.c: 1.27
	sys/dev/usb/uirda.c: 1.43
	sys/dev/usb/ulpt.c: 1.99
	sys/dev/usb/umass.c: 1.163
	sys/dev/usb/umidi.c: 1.74
	sys/dev/usb/uscanner.c: 1.82
	sys/dev/usb/usscanner.c: 1.43
	sys/dev/usb/ustir.c: 1.39
	sys/dev/usb/utoppy.c: 1.30
	sys/dev/usb/uvideo.c: 1.46
PR kern/52931 Kernel panics with Atheros usb wireless interface
Audit the flags to usbd_create_xfer so that USBD_FORCE_SHORT_XFER is
supplied wherever such a transfer is setup.  We can drop
USBD_SHORT_XFER_OK as it has not bearing on number of TDs

Pull up following revision(s) (requested by skrll in ticket #509):
	sys/dev/usb/if_ural.c: revision 1.53
	sys/dev/usb/if_run.c: revision 1.25
	sys/dev/usb/ustir.c: revision 1.39
	sys/dev/usb/irmce.c: revision 1.4
	sys/dev/usb/if_urtwn.c: revision 1.56
	sys/dev/usb/pseye.c: revision 1.24
	sys/dev/usb/if_rum.c: revision 1.59
	sys/dev/usb/if_upl.c: revision 1.61
	sys/dev/usb/ucom.c: revision 1.120
	sys/dev/usb/if_zyd.c: revision 1.45
	sys/dev/usb/if_axen.c: revision 1.12
	sys/dev/usb/umidi.c: revision 1.74
	sys/dev/usb/if_udav.c: revision 1.52
	sys/dev/usb/if_athn_usb.c: revision 1.25
	sys/dev/usb/usscanner.c: revision 1.43
	sys/dev/usb/ualea.c: revision 1.6 - 1.9
	sys/dev/usb/if_upgt.c: revision 1.18
	sys/dev/usb/if_atu.c: revision 1.56
	sys/dev/usb/utoppy.c: revision 1.30
	sys/dev/usb/ubt.c: revision 1.60
	sys/dev/usb/if_urtw.c: revision 1.14
	sys/dev/usb/uirda.c: revision 1.43
	sys/dev/usb/umass.c: revision 1.163
	sys/dev/usb/if_cdce.c: revision 1.45
	sys/dev/usb/if_cue.c: revision 1.77
	sys/dev/usb/if_kue.c: revision 1.91
	sys/dev/usb/uvideo.c: revision 1.46
	sys/dev/usb/uhso.c: revision 1.27
	sys/dev/usb/if_smsc.c: revision 1.33
	sys/dev/usb/ugen.c: revision 1.137
	sys/dev/usb/if_axe.c: revision 1.84
	sys/dev/usb/if_aue.c: revision 1.142
	sys/dev/usb/uscanner.c: revision 1.82
	sys/dev/usb/if_urndis.c: revision 1.17
	sys/dev/usb/udsir.c: revision 1.6
	sys/dev/usb/if_url.c: revision 1.57
	sys/dev/usb/if_otus.c: revision 1.32
	sys/dev/usb/ulpt.c: revision 1.99

PR kern/52931 Kernel panics with Atheros usb wireless interface
Audit the flags to usbd_create_xfer so that USBD_FORCE_SHORT_XFER is
supplied wherever such a transfer is setup.  We can drop
USBD_SHORT_XFER_OK as it has not bearing on number of TDs

ualea: Tidy up a bit.  Fulfil requests completely.
Don't subtract uninitialized pktsize in error path.

PR kern/52931 Kernel panics with Atheros usb wireless interface

Audit the flags to usbd_create_xfer so that USBD_FORCE_SHORT_XFER is
supplied wherever such a transfer is setup.  We can drop
USBD_SHORT_XFER_OK as it has not bearing on number of TDs

update from HEAD

Pull up following revision(s) (requested by skrll in ticket #1395):
	share/man/man4/axe.4: netbsd-7-nhusb
	share/man/man4/axen.4: netbsd-7-nhusb
	share/man/man4/cdce.4: netbsd-7-nhusb
	share/man/man4/uaudio.4: netbsd-7-nhusb
	share/man/man4/ucom.4: netbsd-7-nhusb
	share/man/man4/uep.4: netbsd-7-nhusb
	share/man/man4/urtw.4: netbsd-7-nhusb
	share/man/man4/usb.4: netbsd-7-nhusb
	share/man/man4/uyap.4: netbsd-7-nhusb
	share/man/man4/xhci.4: netbsd-7-nhusb
	share/man/man9/usbdi.9: netbsd-7-nhusb
	sys/arch/amd64/conf/ALL: netbsd-7-nhusb
	sys/arch/amd64/conf/GENERIC: netbsd-7-nhusb
	sys/arch/amiga/dev/slhci_zbus.c: netbsd-7-nhusb
	sys/arch/arm/allwinner/awin_otg.c: netbsd-7-nhusb
	sys/arch/arm/allwinner/awin_usb.c: netbsd-7-nhusb
	sys/arch/arm/amlogic/amlogic_dwctwo.c: netbsd-7-nhusb
	sys/arch/arm/at91/at91ohci.c: netbsd-7-nhusb
	sys/arch/arm/broadcom/bcm2835_dwctwo.c: netbsd-7-nhusb
	sys/arch/arm/broadcom/bcm53xx_usb.c: netbsd-7-nhusb
	sys/arch/arm/ep93xx/epohci.c: netbsd-7-nhusb
	sys/arch/arm/gemini/obio_ehci.c: netbsd-7-nhusb
	sys/arch/arm/imx/files.imx23: netbsd-7-nhusb
	sys/arch/arm/imx/imxusb.c: netbsd-7-nhusb
	sys/arch/arm/imx/imxusbreg.h: netbsd-7-nhusb
	sys/arch/arm/omap/obio_ohci.c: netbsd-7-nhusb
	sys/arch/arm/omap/omap3_ehci.c: netbsd-7-nhusb
	sys/arch/arm/omap/omapl1x_ohci.c: netbsd-7-nhusb
	sys/arch/arm/omap/tiotg.c: netbsd-7-nhusb
	sys/arch/arm/s3c2xx0/ohci_s3c24x0.c: netbsd-7-nhusb
	sys/arch/arm/samsung/exynos_usb.c: netbsd-7-nhusb
	sys/arch/arm/xscale/pxa2x0_ohci.c: netbsd-7-nhusb
	sys/arch/arm/zynq/zynq_usb.c: netbsd-7-nhusb
	sys/arch/hpcarm/dev/nbp_slhci.c: netbsd-7-nhusb
	sys/arch/hpcmips/dev/plumohci.c: netbsd-7-nhusb
	sys/arch/i386/conf/ALL: netbsd-7-nhusb
	sys/arch/i386/conf/GENERIC: netbsd-7-nhusb
	sys/arch/i386/pci/gcscehci.c: netbsd-7-nhusb
	sys/arch/luna68k/conf/GENERIC: netbsd-7-nhusb
	sys/arch/mips/adm5120/dev/ahci.c: netbsd-7-nhusb
	sys/arch/mips/adm5120/dev/ahcivar.h: netbsd-7-nhusb
	sys/arch/mips/alchemy/dev/ohci_aubus.c: netbsd-7-nhusb
	sys/arch/mips/atheros/dev/ehci_arbus.c: netbsd-7-nhusb
	sys/arch/mips/atheros/dev/ohci_arbus.c: netbsd-7-nhusb
	sys/arch/mips/conf/files.adm5120: netbsd-7-nhusb
	sys/arch/mips/ralink/ralink_ehci.c: netbsd-7-nhusb
	sys/arch/mips/ralink/ralink_ohci.c: netbsd-7-nhusb
	sys/arch/mips/rmi/rmixl_ehci.c: netbsd-7-nhusb
	sys/arch/mips/rmi/rmixl_ohci.c: netbsd-7-nhusb
	sys/arch/playstation2/dev/ohci_sbus.c: netbsd-7-nhusb
	sys/arch/powerpc/booke/dev/pq3ehci.c: netbsd-7-nhusb
	sys/arch/powerpc/ibm4xx/dev/dwctwo_plb.c: netbsd-7-nhusb
	sys/arch/x68k/dev/slhci_intio.c: netbsd-7-nhusb
	sys/conf/files: netbsd-7-nhusb
	sys/dev/cardbus/ehci_cardbus.c: netbsd-7-nhusb
	sys/dev/cardbus/ohci_cardbus.c: netbsd-7-nhusb
	sys/dev/cardbus/uhci_cardbus.c: netbsd-7-nhusb
	sys/dev/ic/sl811hs.c: netbsd-7-nhusb
	sys/dev/ic/sl811hsvar.h: netbsd-7-nhusb
	sys/dev/isa/slhci_isa.c: netbsd-7-nhusb
	sys/dev/marvell/ehci_mv.c: netbsd-7-nhusb
	sys/dev/pci/ehci_pci.c: netbsd-7-nhusb
	sys/dev/pci/ohci_pci.c: netbsd-7-nhusb
	sys/dev/pci/uhci_pci.c: netbsd-7-nhusb
	sys/dev/pci/xhci_pci.c: netbsd-7-nhusb
	sys/dev/pcmcia/slhci_pcmcia.c: netbsd-7-nhusb
	sys/dev/usb/Makefile.usbdevs: netbsd-7-nhusb
	sys/dev/usb/TODO: netbsd-7-nhusb
	sys/dev/usb/TODO.usbmp: netbsd-7-nhusb
	sys/dev/usb/aubtfwl.c: netbsd-7-nhusb
	sys/dev/usb/auvitek.c: netbsd-7-nhusb
	sys/dev/usb/auvitek_audio.c: netbsd-7-nhusb
	sys/dev/usb/auvitek_dtv.c: netbsd-7-nhusb
	sys/dev/usb/auvitek_i2c.c: netbsd-7-nhusb
	sys/dev/usb/auvitek_video.c: netbsd-7-nhusb
	sys/dev/usb/auvitekvar.h: netbsd-7-nhusb
	sys/dev/usb/ehci.c: netbsd-7-nhusb
	sys/dev/usb/ehcireg.h: netbsd-7-nhusb
	sys/dev/usb/ehcivar.h: netbsd-7-nhusb
	sys/dev/usb/emdtv.c: netbsd-7-nhusb
	sys/dev/usb/emdtv_dtv.c: netbsd-7-nhusb
	sys/dev/usb/emdtv_ir.c: netbsd-7-nhusb
	sys/dev/usb/emdtvvar.h: netbsd-7-nhusb
	sys/dev/usb/ezload.c: netbsd-7-nhusb
	sys/dev/usb/ezload.h: netbsd-7-nhusb
	sys/dev/usb/files.usb: netbsd-7-nhusb
	sys/dev/usb/hid.c: netbsd-7-nhusb
	sys/dev/usb/hid.h: netbsd-7-nhusb
	sys/dev/usb/if_athn_usb.c: netbsd-7-nhusb
	sys/dev/usb/if_athn_usb.h: netbsd-7-nhusb
	sys/dev/usb/if_atu.c: netbsd-7-nhusb
	sys/dev/usb/if_atureg.h: netbsd-7-nhusb
	sys/dev/usb/if_aue.c: netbsd-7-nhusb
	sys/dev/usb/if_auereg.h: netbsd-7-nhusb
	sys/dev/usb/if_axe.c: netbsd-7-nhusb
	sys/dev/usb/if_axen.c: netbsd-7-nhusb
	sys/dev/usb/if_axenreg.h: netbsd-7-nhusb
	sys/dev/usb/if_axereg.h: netbsd-7-nhusb
	sys/dev/usb/if_cdce.c: netbsd-7-nhusb
	sys/dev/usb/if_cdcereg.h: netbsd-7-nhusb
	sys/dev/usb/if_cue.c: netbsd-7-nhusb
	sys/dev/usb/if_cuereg.h: netbsd-7-nhusb
	sys/dev/usb/if_kue.c: netbsd-7-nhusb
	sys/dev/usb/if_kuereg.h: netbsd-7-nhusb
	sys/dev/usb/if_otus.c: netbsd-7-nhusb
	sys/dev/usb/if_otusvar.h: netbsd-7-nhusb
	sys/dev/usb/if_rum.c: netbsd-7-nhusb
	sys/dev/usb/if_rumreg.h: netbsd-7-nhusb
	sys/dev/usb/if_rumvar.h: netbsd-7-nhusb
	sys/dev/usb/if_run.c: netbsd-7-nhusb
	sys/dev/usb/if_runvar.h: netbsd-7-nhusb
	sys/dev/usb/if_smsc.c: netbsd-7-nhusb
	sys/dev/usb/if_smscreg.h: netbsd-7-nhusb
	sys/dev/usb/if_smscvar.h: netbsd-7-nhusb
	sys/dev/usb/if_udav.c: netbsd-7-nhusb
	sys/dev/usb/if_udavreg.h: netbsd-7-nhusb
	sys/dev/usb/if_upgt.c: netbsd-7-nhusb
	sys/dev/usb/if_upgtvar.h: netbsd-7-nhusb
	sys/dev/usb/if_upl.c: netbsd-7-nhusb
	sys/dev/usb/if_ural.c: netbsd-7-nhusb
	sys/dev/usb/if_uralreg.h: netbsd-7-nhusb
	sys/dev/usb/if_uralvar.h: netbsd-7-nhusb
	sys/dev/usb/if_url.c: netbsd-7-nhusb
	sys/dev/usb/if_urlreg.h: netbsd-7-nhusb
	sys/dev/usb/if_urndis.c: netbsd-7-nhusb
	sys/dev/usb/if_urndisreg.h: netbsd-7-nhusb
	sys/dev/usb/if_urtw.c: netbsd-7-nhusb
	sys/dev/usb/if_urtwn.c: netbsd-7-nhusb
	sys/dev/usb/if_urtwn_data.h: netbsd-7-nhusb
	sys/dev/usb/if_urtwnreg.h: netbsd-7-nhusb
	sys/dev/usb/if_urtwnvar.h: netbsd-7-nhusb
	sys/dev/usb/if_urtwreg.h: netbsd-7-nhusb
	sys/dev/usb/if_zyd.c: netbsd-7-nhusb
	sys/dev/usb/if_zydreg.h: netbsd-7-nhusb
	sys/dev/usb/irmce.c: netbsd-7-nhusb
	sys/dev/usb/moscom.c: netbsd-7-nhusb
	sys/dev/usb/motg.c: netbsd-7-nhusb
	sys/dev/usb/motgvar.h: netbsd-7-nhusb
	sys/dev/usb/ohci.c: netbsd-7-nhusb
	sys/dev/usb/ohcireg.h: netbsd-7-nhusb
	sys/dev/usb/ohcivar.h: netbsd-7-nhusb
	sys/dev/usb/pseye.c: netbsd-7-nhusb
	sys/dev/usb/slurm.c: netbsd-7-nhusb
	sys/dev/usb/stuirda.c: netbsd-7-nhusb
	sys/dev/usb/u3g.c: netbsd-7-nhusb
	sys/dev/usb/uark.c: netbsd-7-nhusb
	sys/dev/usb/uatp.c: netbsd-7-nhusb
	sys/dev/usb/uaudio.c: netbsd-7-nhusb
	sys/dev/usb/uberry.c: netbsd-7-nhusb
	sys/dev/usb/ubsa.c: netbsd-7-nhusb
	sys/dev/usb/ubsa_common.c: netbsd-7-nhusb
	sys/dev/usb/ubsavar.h: netbsd-7-nhusb
	sys/dev/usb/ubt.c: netbsd-7-nhusb
	sys/dev/usb/uchcom.c: netbsd-7-nhusb
	sys/dev/usb/ucom.c: netbsd-7-nhusb
	sys/dev/usb/ucomvar.h: netbsd-7-nhusb
	sys/dev/usb/ucycom.c: netbsd-7-nhusb
	sys/dev/usb/udl.c: netbsd-7-nhusb
	sys/dev/usb/udl.h: netbsd-7-nhusb
	sys/dev/usb/udsbr.c: netbsd-7-nhusb
	sys/dev/usb/udsir.c: netbsd-7-nhusb
	sys/dev/usb/uep.c: netbsd-7-nhusb
	sys/dev/usb/uftdi.c: netbsd-7-nhusb
	sys/dev/usb/uftdireg.h: netbsd-7-nhusb
	sys/dev/usb/ugen.c: netbsd-7-nhusb
	sys/dev/usb/ugensa.c: netbsd-7-nhusb
	sys/dev/usb/uhci.c: netbsd-7-nhusb
	sys/dev/usb/uhcireg.h: netbsd-7-nhusb
	sys/dev/usb/uhcivar.h: netbsd-7-nhusb
	sys/dev/usb/uhid.c: netbsd-7-nhusb
	sys/dev/usb/uhidev.c: netbsd-7-nhusb
	sys/dev/usb/uhidev.h: netbsd-7-nhusb
	sys/dev/usb/uhmodem.c: netbsd-7-nhusb
	sys/dev/usb/uhso.c: netbsd-7-nhusb
	sys/dev/usb/uhub.c: netbsd-7-nhusb
	sys/dev/usb/uipad.c: netbsd-7-nhusb
	sys/dev/usb/uipaq.c: netbsd-7-nhusb
	sys/dev/usb/uirda.c: netbsd-7-nhusb
	sys/dev/usb/uirdavar.h: netbsd-7-nhusb
	sys/dev/usb/ukbd.c: netbsd-7-nhusb
	sys/dev/usb/ukbdmap.c: netbsd-7-nhusb
	sys/dev/usb/ukyopon.c: netbsd-7-nhusb
	sys/dev/usb/ukyopon.h: netbsd-7-nhusb
	sys/dev/usb/ulpt.c: netbsd-7-nhusb
	sys/dev/usb/umass.c: netbsd-7-nhusb
	sys/dev/usb/umass_isdata.c: netbsd-7-nhusb
	sys/dev/usb/umass_isdata.h: netbsd-7-nhusb
	sys/dev/usb/umass_quirks.c: netbsd-7-nhusb
	sys/dev/usb/umass_quirks.h: netbsd-7-nhusb
	sys/dev/usb/umass_scsipi.c: netbsd-7-nhusb
	sys/dev/usb/umass_scsipi.h: netbsd-7-nhusb
	sys/dev/usb/umassvar.h: netbsd-7-nhusb
	sys/dev/usb/umcs.c: netbsd-7-nhusb
	sys/dev/usb/umct.c: netbsd-7-nhusb
	sys/dev/usb/umidi.c: netbsd-7-nhusb
	sys/dev/usb/umidi_quirks.c: netbsd-7-nhusb
	sys/dev/usb/umidi_quirks.h: netbsd-7-nhusb
	sys/dev/usb/umodem.c: netbsd-7-nhusb
	sys/dev/usb/umodem_common.c: netbsd-7-nhusb
	sys/dev/usb/umodemvar.h: netbsd-7-nhusb
	sys/dev/usb/ums.c: netbsd-7-nhusb
	sys/dev/usb/uplcom.c: netbsd-7-nhusb
	sys/dev/usb/urio.c: netbsd-7-nhusb
	sys/dev/usb/urio.h: netbsd-7-nhusb
	sys/dev/usb/usb.c: netbsd-7-nhusb
	sys/dev/usb/usb.h: netbsd-7-nhusb
	sys/dev/usb/usb_mem.c: netbsd-7-nhusb
	sys/dev/usb/usb_mem.h: netbsd-7-nhusb
	sys/dev/usb/usb_quirks.c: netbsd-7-nhusb
	sys/dev/usb/usb_quirks.h: netbsd-7-nhusb
	sys/dev/usb/usb_subr.c: netbsd-7-nhusb
	sys/dev/usb/usbdevices.config: netbsd-7-nhusb
	sys/dev/usb/usbdevs: netbsd-7-nhusb
	sys/dev/usb/usbdevs.h: netbsd-7-nhusb
	sys/dev/usb/usbdevs_data.h: netbsd-7-nhusb
	sys/dev/usb/usbdi.c: netbsd-7-nhusb
	sys/dev/usb/usbdi.h: netbsd-7-nhusb
	sys/dev/usb/usbdi_util.c: netbsd-7-nhusb
	sys/dev/usb/usbdi_util.h: netbsd-7-nhusb
	sys/dev/usb/usbdivar.h: netbsd-7-nhusb
	sys/dev/usb/usbhid.h: netbsd-7-nhusb
	sys/dev/usb/usbhist.h: netbsd-7-nhusb
	sys/dev/usb/usbroothub.c: netbsd-7-nhusb
	sys/dev/usb/usbroothub.h: netbsd-7-nhusb
	sys/dev/usb/usbroothub_subr.c: delete
	sys/dev/usb/usbroothub_subr.h: delete
	sys/dev/usb/uscanner.c: netbsd-7-nhusb
	sys/dev/usb/uslsa.c: netbsd-7-nhusb
	sys/dev/usb/usscanner.c: netbsd-7-nhusb
	sys/dev/usb/ustir.c: netbsd-7-nhusb
	sys/dev/usb/uthum.c: netbsd-7-nhusb
	sys/dev/usb/utoppy.c: netbsd-7-nhusb
	sys/dev/usb/uts.c: netbsd-7-nhusb
	sys/dev/usb/uvideo.c: netbsd-7-nhusb
	sys/dev/usb/uvisor.c: netbsd-7-nhusb
	sys/dev/usb/uvscom.c: netbsd-7-nhusb
	sys/dev/usb/uyap.c: netbsd-7-nhusb
	sys/dev/usb/uyap_firmware.h: netbsd-7-nhusb
	sys/dev/usb/uyurex.c: netbsd-7-nhusb
	sys/dev/usb/x1input_rdesc.h: netbsd-7-nhusb
	sys/dev/usb/xhci.c: netbsd-7-nhusb
	sys/dev/usb/xhcireg.h: netbsd-7-nhusb
	sys/dev/usb/xhcivar.h: netbsd-7-nhusb
	sys/dev/usb/xinput_rdesc.h: netbsd-7-nhusb
	sys/external/bsd/common/conf/files.linux: netbsd-7-nhusb
	sys/external/bsd/common/include/linux/err.h: netbsd-7-nhusb
	sys/external/bsd/common/include/linux/kernel.h: netbsd-7-nhusb
	sys/external/bsd/common/include/linux/workqueue.h: netbsd-7-nhusb
	sys/external/bsd/common/linux/linux_work.c: netbsd-7-nhusb
	sys/external/bsd/drm2/dist/drm/radeon/atombios_encoders.c: netbsd-7-nhusb
	sys/external/bsd/drm2/dist/drm/radeon/radeon_legacy_encoders.c: netbsd-7-nhusb
	sys/external/bsd/drm2/drm/files.drmkms: netbsd-7-nhusb
	sys/external/bsd/drm2/i915drm/files.i915drmkms: netbsd-7-nhusb
	sys/external/bsd/drm2/include/linux/err.h: delete
	sys/external/bsd/drm2/include/linux/workqueue.h: delete
	sys/external/bsd/drm2/linux/files.drmkms_linux: netbsd-7-nhusb
	sys/external/bsd/drm2/linux/linux_work.c: delete
	sys/external/bsd/dwc2/dwc2.c: netbsd-7-nhusb
	sys/external/bsd/dwc2/dwc2.h: netbsd-7-nhusb
	sys/external/bsd/dwc2/dwc2var.h: netbsd-7-nhusb
	sys/external/bsd/dwc2/dwctwo2netbsd: netbsd-7-nhusb
	sys/external/bsd/dwc2/conf/files.dwc2: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_core.c: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_core.h: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_coreintr.c: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_hcd.c: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_hcd.h: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_hcdddma.c: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_hcdintr.c: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_hcdqueue.c: netbsd-7-nhusb
	sys/external/bsd/dwc2/dist/dwc2_hw.h: netbsd-7-nhusb
	sys/modules/drmkms_linux/Makefile: netbsd-7-nhusb
	sys/modules/i915drmkms/Makefile: netbsd-7-nhusb
	sys/rump/dev/lib/libugenhc/ugenhc.c: netbsd-7-nhusb
	sys/rump/dev/lib/libusb/Makefile: netbsd-7-nhusb
	sys/rump/dev/lib/libusb/USB.ioconf: netbsd-7-nhusb
	sys/rump/dev/lib/libusb/usb_at_ugenhc.c: delete
	sys/rump/dev/lib/libusb/opt/opt_usb.h: delete
	sys/rump/dev/lib/libusb/opt/opt_usbverbose.h: delete
	sys/sys/mbuf.h: netbsd-7-nhusb
	usr.sbin/usbdevs/usbdevs.8: netbsd-7-nhusb
	usr.sbin/usbdevs/usbdevs.c: netbsd-7-nhusb
Merge netbsd-7-nhusb:
- API / infrastructure changes to support memory management changes.
- Memory management improvements and bug fixes.
- HCDs should now be MP safe
- conversion to KERNHIST based debug
- FS/LS isoc support on ehci(4).
- conversion to kmem(9)
- Some USB 3 support - mostly from Takahiro HAYASHI (t-hash).
- interrupt transfers now get proper DMA operations
- general bug fixes
     - kern/48308
     - uhub status notification improvements
     - umass(4) probe fix (applied to HEAD already)
     - ohci(4) short transfer fix
- Change the SOFTINT level from NET to SERIAL for the USB softint handler.
  This gives the callback a chance of running when another softint handler
  at SOFTINT_NET has blocked holding a lock, e.g. softnet_lock and most of
  the network stack.
     - kern/49065 - ifconfig tun0 ... sequence locks up system / lockup:
       softnet_lock held across usb xfr
     - kern/50491 - unkillable wait in usbd_transfer while using usmsc0
       on raspberry pi 2
     - kern/51395 - USB Ethernet makes xhci hang
- Various improvements to slhci(4)
- Various improvements to dwc2(4)

Sync with HEAD

Sync with HEAD

Sync with HEAD/nhusb

Appease coverity which is having nightmares about strings not being
null-terminated by using strlcpy rather than strncpy when it doesn't
matter.

ok christos.

Sync with HEAD.  (Note that most of these changes are simply $NetBSD$
tag issues.)

Destroy all mutexes on detach

Move bpf_mtap and if_ipackets++ on Rx of each driver to percpuq if_input

The benefits of the change are:
- We can reduce codes
- We can provide the same behavior between drivers
  - Where/When if_ipackets is counted up
  - Note that some drivers still update packet statistics in their own
    way (periodical update)
- Moved bpf_mtap run in softint
  - This makes it easy to MP-ify bpf

Proposed on tech-kern and tech-net

WIP MPification

First pass at netbsd-7 updated with USB code from HEAD

Sync with HEAD

Introduce m_set_rcvif and m_reset_rcvif

The API is used to set (or reset) a received interface of a mbuf.
They are counterpart of m_get_rcvif, which will come in another
commit, hide internal of rcvif operation, and reduce the diff of
the upcoming change.

No functional change.

Merge nick-nhusb

- API / infrastructure changes to support memory management changes.
- Memory management improvements and bug fixes.
- HCDs should now be MP safe
- conversion to KERNHIST based debug
- FS/LS isoc support on ehci(4).
- conversion to kmem(9)
- Some USB 3 support - mostly from Takahiro HAYASHI (t-hash).
- interrupt transfers now get proper DMA operations
- general bug fixes
    - kern/48308
    - uhub status notification improvements
    - umass(4) probe fix (applied to HEAD already)
    - ohci(4) short transfer fix

Sync with HEAD

Introduce softint-based if_input

This change intends to run the whole network stack in softint context
(or normal LWP), not hardware interrupt context. Note that the work is
still incomplete by this change; to that end, we also have to softint-ify
if_link_state_change (and bpf) which can still run in hardware interrupt.

This change softint-ifies at ifp->if_input that is called from
each device driver (and ieee80211_input) to ensure Layer 2 runs
in softint (e.g., ether_input and bridge_input). To this end,
we provide a framework (called percpuq) that utlizes softint(9)
and percpu ifqueues. With this patch, rxintr of most drivers just
queues received packets and schedules a softint, and the softint
dequeues packets and does rest packet processing.

To minimize changes to each driver, percpuq is allocated in struct
ifnet for now and that is initialized by default (in if_attach).
We probably have to move percpuq to softc of each driver, but it's
future work. At this point, only wm(4) has percpuq in its softc
as a reference implementation.

Additional information including performance numbers can be found
in the thread at tech-kern@ and tech-net@:
http://mail-index.netbsd.org/tech-kern/2016/01/14/msg019997.html

Acknowledgment: riastradh@ greatly helped this work.
Thank you very much!

Strictly follow the sequence abort pipe, destroy xfers, and close pipe as
API now requires.  Plug some memory leaks in some drivers while doing
this.

Also, remove up_refcnt as it was broken and helped leak more memory.

Move from usbd_{alloc,free}_xfer and usbd_{alloc,free}_buffer to
usbd_{create,destroy}_xfer.  The API change will allow future changes
to HCDs to simplify the transfer resource allocation and activation.

Several devices tested including ucom, umass, smsc, uvideo, and uaudio.

Sync with HEAD

Convert sys/dev to use <sys/rndsource.h>.

Add prefixes to attach_arg structure member names. No functional change.

Do the same as OpenBSD and get rid of the *_handle typedefs and use
plain structures insteads

KNF. No brackets around return value.

Step #1 of memory allocation re-organisation.

Centralised the buffer allocation routine which now supports DMA
and non-DMA capable host controllers.  Remove the
ubm_{alloc,free}m methods from usbd_bus_methods.

The buffer allocation is only allowed in thread context and,
therefore, negates the usefulness of the reserve dma code which
is removed in this change.

USBD_NO_COPY is also no longer required as usbd_transfer and
usbd_transfer_complete now track buffer usage and handle any
copying.

resync with head

sync with head

- need opt_usb.h if depending on USB_DEBUG
- remove trailing whitespace
- add missing KERNEL_RCSID

sync with head

sync to latest -current.

no need to device_pmf_is_registered() before unregister

sync to -current.

remove any remnants of freebsd/openbsd code.

merge to -current.

Entropy-pool implementation move and cleanup.

1) Move core entropy-pool code and source/sink/sample management code
   to sys/kern from sys/dev.

2) Remove use of NRND as test for presence of entropy-pool code throughout
   source tree.

3) Remove use of RND_ENABLED in device drivers as microoptimization to
   avoid expensive operations on disabled entropy sources; make the
   rnd_add calls do this directly so all callers benefit.

4) Fix bug in recent rnd_add_data()/rnd_add_uint32() changes that might
   have lead to slight entropy overestimation for some sources.

5) Add new source types for environmental sensors, power sensors, VM
   system events, and skew between clocks, with a sample implementation
   for each.

ok releng to go in before the branch due to the difficulty of later
pullup (widespread #ifdef removal and moved files).  Tested with release
builds on amd64 and evbarm and live testing on amd64.

Delete Linux Ethernet Gadget from special handling.
This makes at least the Openmoko Freerunner work again.
Fixes PR kern/45591.
Ok Jeff Rizzo (releng).

Catchup with rmind-uvmplock merge.

sync with head

- Add some new devices (from OpenBSD rev. 1.11-1.12,1.15 and 1.20).
- force usb to send a zero length packet on the end of usb packets
  which happen to be a multple of 64 bytes, to indicate end of packet.
  (from OpenBSD rev. 1.23)
- style change

sync with head

PR/44213 - B ICT A.P. de Brouwer Jr. -- add some Motorola phones

Sync with HEAD.

sync with head.

Like some other USB devices, register cdce(4) with pmf(9).
Addresses PR#40949.

sync with head

Changes in cdce(4).

When getting the CDC Ethernet descriptor, search for the right
descriptor type.  Avoid ignoring return value of ether_aton_r().

Never return ENETRESET from cdce_ioctl().
This fixes the "cannot assign link-local address" issue.

Deduplicate a local Ethernet CRC32 function.  When appending
CRC32 for Zaurus ensure it is in a consistent endianess.

Replace ether_nonstatic_aton with a
- better named one
- not suffering from buffer oveflow
- simpler
- handling different separators
- returning error codes for errors

Some ideas from one posted on tech-net by Jonathan A. Kollasch

Sync with HEAD.

sync to netbsd-5

Push the bpf_ops usage back into bpf.h. Push the common ifp->if_bpf
check into the inline functions as well the fourth argument for
bpf_attach.

sync with head

Redefine bpf linkage through an always present op vector, i.e.
#if NBPFILTER is no longer required in the client.  This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached.  However, callers of bpf can
now be modularized.

Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff.  ... and I'm not going to ponder the depths of unload
here.

Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.

Simplify several device-activation hooks.

fix up USB drivers printing of autoconf information

1. expand the USB_ATTACH_SETUP macro (requested by jmcneill)

2. reorder the attach function so that the first thing it does is print
   newlines.

3. after this, we can call usbd_devinfo_alloc(), which polls the device
   allowing a context switch, and aprint_normal() the device information.

this avoids problems where autoconf messages are getting mixed up.

sync with head

Pull up following revision(s) (requested by tron in ticket #922):
	sys/dev/usb/if_cdce.c: revision 1.22
Add support for the Openmoko Freerunner to cdce(4) ported from FreeBSD.
The patch was supplied by Pierre Pronchery in PR kern/40049.

Change spaces to tabs and remove some unnecessary parentheses.  No
functional change intended.

Expand <dev/usb/usb_port.h> definitions, and lightly unifdef(1).

sync with head.

Add support for the Openmoko Freerunner to cdce(4) ported from FreeBSD.

The patch was supplied by Pierre Pronchery in PR kern/40049.

Sync with HEAD.

Commit is split, to avoid a "too many arguments" protocol error.

sync with head.

Sync with HEAD.

Remove extra whitespace added by a stupid tool.
XXX: more in src/sys/arch

bcopy -> memcpy

Sync with HEAD.

Sync with HEAD.

Update haad-dm branch to haad-dm-base2.

*** Summary ***

When a link-layer address changes (e.g., ifconfig ex0 link
02:de:ad:be:ef:02 active), send a gratuitous ARP and/or a Neighbor
Advertisement to update the network-/link-layer address bindings
on our LAN peers.

Refuse a change of ethernet address to the address 00:00:00:00:00:00
or to any multicast/broadcast address.  (Thanks matt@.)

Reorder ifnet ioctl operations so that driver ioctls may inherit
the functions of their "class"---ether_ioctl(), fddi_ioctl(), et
cetera---and the class ioctls may inherit from the generic ioctl,
ifioctl_common(), but both driver- and class-ioctls may override
the generic behavior.  Make network drivers share more code.

Distinguish a "factory" link-layer address from others for the
purposes of both protecting that address from deletion and computing
EUI64.

Return consistent, appropriate error codes from network drivers.

Improve readability.  KNF.

*** Details ***

In if_attach(), always initialize the interface ioctl routine,
ifnet->if_ioctl, if the driver has not already initialized it.
Delete if_ioctl == NULL tests everywhere else, because it cannot
happen.

In the ioctl routines of network interfaces, inherit common ioctl
behaviors by calling either ifioctl_common() or whichever ioctl
routine is appropriate for the class of interface---e.g., ether_ioctl()
for ethernets.

Stop (ab)using SIOCSIFADDR and start to use SIOCINITIFADDR.  In
the user->kernel interface, SIOCSIFADDR's argument was an ifreq,
but on the protocol->ifnet interface, SIOCSIFADDR's argument was
an ifaddr.  That was confusing, and it would work against me as I
make it possible for a network interface to overload most ioctls.
On the protocol->ifnet interface, replace SIOCSIFADDR with
SIOCINITIFADDR.  In ifioctl(), return EPERM if userland tries to
invoke SIOCINITIFADDR.

In ifioctl(), give the interface the first shot at handling most
interface ioctls, and give the protocol the second shot, instead
of the other way around. Finally, let compatibility code (COMPAT_OSOCK)
take a shot.

Pull device initialization out of switch statements under
SIOCINITIFADDR.  For example, pull ..._init() out of any switch
statement that looks like this:

        switch (...->sa_family) {
        case ...:
                ..._init();
                ...
                break;
        ...
        default:
                ..._init();
                ...
                break;
        }

Rewrite many if-else clauses that handle all permutations of IFF_UP
and IFF_RUNNING to use a switch statement,

        switch (x & (IFF_UP|IFF_RUNNING)) {
        case 0:
                ...
                break;
        case IFF_RUNNING:
                ...
                break;
        case IFF_UP:
                ...
                break;
        case IFF_UP|IFF_RUNNING:
                ...
                break;
        }

unifdef lots of code containing #ifdef FreeBSD, #ifdef NetBSD, and
#ifdef SIOCSIFMTU, especially in fwip(4) and in ndis(4).

In ipw(4), remove an if_set_sadl() call that is out of place.

In nfe(4), reuse the jumbo MTU logic in ether_ioctl().

Let ethernets register a callback for setting h/w state such as
promiscuous mode and the multicast filter in accord with a change
in the if_flags: ether_set_ifflags_cb() registers a callback that
returns ENETRESET if the caller should reset the ethernet by calling
if_init(), 0 on success, != 0 on failure.  Pull common code from
ex(4), gem(4), nfe(4), sip(4), tlp(4), vge(4) into ether_ioctl(),
and register if_flags callbacks for those drivers.

Return ENOTTY instead of EINVAL for inappropriate ioctls.  In
zyd(4), use ENXIO instead of ENOTTY to indicate that the device is
not any longer attached.

Add to if_set_sadl() a boolean 'factory' argument that indicates
whether a link-layer address was assigned by the factory or some
other source.  In a comment, recommend using the factory address
for generating an EUI64, and update in6_get_hw_ifid() to prefer a
factory address to any other link-layer address.

Add a routing message, RTM_LLINFO_UPD, that tells protocols to
update the binding of network-layer addresses to link-layer addresses.
Implement this message in IPv4 and IPv6 by sending a gratuitous
ARP or a neighbor advertisement, respectively.  Generate RTM_LLINFO_UPD
messages on a change of an interface's link-layer address.

In ether_ioctl(), do not let SIOCALIFADDR set a link-layer address
that is broadcast/multicast or equal to 00:00:00:00:00:00.

Make ether_ioctl() call ifioctl_common() to handle ioctls that it
does not understand.

In gif(4), initialize if_softc and use it, instead of assuming that
the gif_softc and ifp overlap.

Let ifioctl_common() handle SIOCGIFADDR.

Sprinkle rtcache_invariants(), which checks on DIAGNOSTIC kernels
that certain invariants on a struct route are satisfied.

In agr(4), rewrite agr_ioctl_filter() to be a bit more explicit
about the ioctls that we do not allow on an agr(4) member interface.

bzero -> memset.  Delete unnecessary casts to void *.  Use
sockaddr_in_init() and sockaddr_in6_init().  Compare pointers with
NULL instead of "testing truth".  Replace some instances of (type
*)0 with NULL.  Change some K&R prototypes to ANSI C, and join
lines.

Sync with HEAD.

Sync with HEAD.

Sync with HEAD.

If you want to test option INET, make sure that it is in sight.

Sync w/ -current. 34 merge conflicts to follow.

sync with head

Sync with HEAD.

Use ether_nonstatic_aton() when appropriate.

Split device_t and softc for all USB device drivers, and related cosmetic
changes.

Matthias Drochner kindly reviewed this patch, and tested ums, ubt, uaudio
and ral.  I tested umass myself.

sync with HEAD

Sync with HEAD.

sync with head.

Start patching up the kernel so that a network driver always has
the opportunity to handle an ioctl before generic ifioctl handling
occurs.  This will ease extending the kernel and sharing of code
between drivers.

First steps:  Make the signature of ifioctl_common() match struct
ifinet->if_ioctl.  Convert SIOCSIFCAP and SIOCSIFMTU to the new
ifioctl() regime, throughout the kernel.

sync with head.

Sync with head.

New devices from FreeBSD/OpenBSD:
- Acer Labs M5632 USB 2.0 Data Link
- Ambit NTL 250 cable modem
- COMPAQ iPAQ Linux
- G.Mate YP3X00 PDA (also in NetBSD PR kern/31954)
- Two Motorola devices (details unknown)
- NetChip Linux Ethernet/RNDIS gadgets

Execute callback functions as tasks on FreeBSD.
(FYI, the code does work on NetBSD, but affects the performance, you know.)

Pullup 1.14 (attach driver per interface) with #ifdef USB_USE_IFATTACH.

Pullup 1.13 in a different way.

Add check after m_copyback.

Move commonly used code in USB Ethernet drivers to usb_ethersubr.[ch],
from FreeBSD.  The interface is modified to fit our new code.

(Note FreeBSD passes packets to different kernel thread, which I did NOT
adopt or now.  That is because I'm not sure it is really necessary,
and it enforces more context switchings per packet and probably causes
large latency and poor performace.)

Fix "can't allocate llinfo" errors.
Setup ifp->if_init/ifp->if_stop, and use ether_ioctl() for cdce_ioctl().

Convert to use usbd_map_buffer_mbuf() and eliminate copying.
Tested, ... but it doesn't work.  Why?

arpresolve: can't allocate llinfo on cdce0 for 192.168.129.201

Overhaul of USB stack, mostly DMA related

This applies to NetBSD 4.99.13 (March 1, 2007)

usbdi(9) interface is based on FreeBSD version, excluding
 - removal of portability code

Patch most NetBSD changes, excluding
 - DMA memory "reserve", since we don't need contiguous buffers any longer
 - volatiles in DMA structure, since it should not be needed
   with proper bus_dmamap_sync(9)s

DMA/non-DMA memory management overhaul
 - Move all DMA related code to usb_mem.[ch]
   (add usb_alloc_buffer_dma(), usb_free_buffer_dma(), etc.).
   XXX Should usb_mem.[ch] be renamed as usb_mem_dma.[ch] ?
 - Add corresponding non-DMA code to usb_mem_nodma.[ch] .
   Currently just use malloc(9).
 - Above files are conditionally used by config framework (added
   attributes to conf/files and dev/usb/files.usb).
 - Add diagnostic panics when resource allocation is requested
   on interrupt context.
 - Change memory allocations (that require context) from NOWAIT to WAITOK.

Allocate DMA/non-DMA buffer per host interface, not globally.
 advantage:	Buffers can be freed on detaching host interface.
		Activity of a host interface does not affect others.
 disadvantages:	It possibly consumes more memory.

API changes
 - usbd_alloc_xfer() is changed:
    old: usbd_xfer_handle usbd_alloc_xfer(usbd_device_handle dev);
    new: usbd_xfer_handle usbd_alloc_xfer(usbd_device_handle dev,
		usbd_pipe_handle pipe);
 - pipe argument of usbd_setup_*xfer() are now unused
   XXX the pipe argument should be removed?
 - add mapping APIs
 - async request will be processed as a task (kernel thread context),
   and delayed to some extent
 - usbdivar.h: struct usbd_xfer: renamed a member "allocbuf" to "hcbuffer"
   (mapped/allocated/refered buffer for HCI driver)
 - usb_port.h: change usb_proc_ptr from  struct ptoc *  to struct lwp *
 - usb_port.h: add usb_sigproc_ptr for psignal(9) (struct proc *)
 - usb.h: add UE_MAXPKTSZ(ep) and UE_MAXPKTSZ_MASK macros for USB 2.0

changes to USB device drivers
 - atu, aue, axe, cdce, cue, kue, rum, udav, upl, ural, url,
   uaudio, ubt, ucom, ugen, uhidev, uirda, ulpt, umidi, urio,
   uscanner, ustir, utoppy:
    * catch up API change of usbd_alloc_xfer()
 - umass, usscanner:
    * catch up API change of usbd_alloc_xfer()
    * eliminate memory copy for large transfer

ohci
 - free resources on detach
 - add lots of bus_dmamap_sync() operations
 - simplify the code of loading std chain
 - rewrite code of looking up TD/ITD from DMA addr by using allocation chunk
 - add workaround for CMD Tech 670 and 673 chipsets
 - make sure resources are not allocated in interrupt context
 - add support for mapping buffer and mbuf

slhci
 - allocate xfer and slhci_xfer at once, and simplify relevant code
 - add slhci_detach()
 - remove second arg of slhci_attach() since it is the same as the first arg.
 - add support for "mapping" (no, it doesn't map since it doesn't do DMA)
   buffer and mbuf
 - add pcmcia frontend
 - NOT TESTED, missing hardware

ehci
 - add lots of bus_dmamap_sync() operations, possibly too many
 - make sure resources are not allocated in interrupt context
 - add support for mapping buffer and mbuf
 - done only simple test

uhci
 - add lots of bus_dmamap_sync() operations, possibly too many
 - make sure resources are not allocated in interrupt context
 - add support for mapping buffer and mbuf

To do
 - review, test, debug
 - rewrite network drivers to utilize usbd_map_buffer_mbuf()
 - rewrite uaudio(4) to eliminate memcpy
 - "pipe" argument of usbd_setup_*xfer() should eventually be removed

sync with head.

Sync with head.

Introduce different autoconf interface attributes for USB drivers
matching (and handling) a whole device and those which match an
interface only. This will allow to enforce some rules, eg that
the former don't use interface information for matching or that the
latter don't modify global device state.
The previous way left too much freedom do the drivers which led to
inconsistencies and abuse.
For now, I've not changed locators and submatch rules, this will
happen later.
There should not be any change in behaviour, except in the case of
some drivers which did behave inconsistently:
if_atu, if_axe, uep: matched the configured device in the interface
 stage, but did configuration again. I've converted them to match
 in the device stage.
ustir, utoppy: matched in the interface stage, but only against
 vendor/device information, and used any configuration/interface
 without checking. Changed to match in device stage, and added
 some simple code to configure and use the first interface.
If you have one of those devices, please test!

Sync with HEAD.

Kill caddr_t; there will be some MI fallout, but it will be fixed shortly.

sync with head.

sync with head.

Sync with head.

__unused removal on arguments; approved by core.

sync with head

- sprinkle __unused on function decls.
- fix a couple of unused bugs
- no more -Wno-unused for i386

sync with head.

sync with head

remove more vestiges of CCITT, LLC, HDLC, NS, and NSIP.

sync with head.

Sync with head.

sync with head.

sync with head.

Merge 2006-03-31 NetBSD-current into the "peter-altq" branch.

Use device_unit().

Sync with head.

sync with head.

Use usbd_clear_endpoint_stall_async() when clearing endpoint stalls in
an interrupt context.  From kern/32172 by darkstar@city-net.com.

Sync with HEAD. Here we go again...

- const poisoning
- eliminate variable shadowing

Don't keep the devinfo string on the stack, instead use malloc/free.
This should cure some rare stack overflows.

Use UTF8 to encode strings read from the device (instead of using '?' for
characters >=0x100).

Also add serial number string to the device information struct.

Sync with HEAD.

file if_cdce.c was added on branch ktrace-lwp on 2004-11-02 07:53:02 +0000

Don't make activate static.  It disagrees with prototype.

Do hex conversion right.

Try to get the Ethernet address of a CDC device in the prescribed way.
If that fails, just invent one (like before).

Add a driver for Communication Data Class Ethernet devices.  From the very
prolific Bill Paul for FreeBSD, via OpenBSD.
XXX Untested, since I don't have any such devices.