/* $NetBSD: if_atureg.h,v 1.4.8.1 2006/05/24 10:58:24 yamt Exp $ */
/* $OpenBSD: if_atureg.h,v 1.21 2004/12/23 13:19:38 dlg Exp $ */
/*
* Copyright (c) 2003
* Daan Vreeken <Danovitsch@Vitsch.net>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Daan Vreeken.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY DAAN VREEKEN AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Daan Vreeken OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#define ATU_CONFIG_NO 1
#define ATU_IFACE_IDX 0
/* the number of simultaniuously requested RX transfers */
#define ATU_RX_LIST_CNT 1
/*
* the number of simultaniously started TX transfers
* my measurements :
* 1 430.82 KB/sec
* 2 534.66 KB/sec
* 3 536.23 KB/sec
* 4 537.80 KB/sec
* 6 537.30 KB/sec
* 8 535.31 KB/sec
* 16 535.68 KB/sec
* 128 535.67 KB/sec (before you ask : yes, 128 is silly :)
* (+/- 24% increase)
*/
#define ATU_TX_LIST_CNT 8
/*
* According to the 802.11 spec (7.1.2) the frame body can be up to 2312 bytes
*/
#define ATU_RX_BUFSZ (ATU_RX_HDRLEN + \
sizeof(struct ieee80211_frame_addr4) + 2312 + 4)
/* BE CAREFULL! should add ATU_TX_PADDING */
#define ATU_TX_BUFSZ (ATU_TX_HDRLEN + \
sizeof(struct ieee80211_frame_addr4) + 2312)
#define ATU_MIN_FRAMELEN 60
/*
* Sending packets of more than 1500 bytes confuses some access points, so the
* default MTU is set to 1500 but can be increased up to 2310 bytes using
* ifconfig
*/
#define ATU_DEFAULT_MTU 1500
#define ATU_MAX_MTU (2312 - 2)
#define ATU_ENDPT_RX 0x0
#define ATU_ENDPT_TX 0x1
#define ATU_ENDPT_MAX 0x2
#define ATU_TX_TIMEOUT 10000
#define ATU_JOIN_TIMEOUT 2000
#define ATU_NO_QUIRK 0x0000
#define ATU_QUIRK_NO_REMAP 0x0001
#define ATU_QUIRK_FW_DELAY 0x0002
#define ATU_DEFAULT_SSID ""
#define ATU_DEFAULT_CHANNEL 10
enum atu_radio_type {
RadioRFMD = 0,
RadioRFMD2958,
RadioRFMD2958_SMC,
RadioIntersil
};
struct atu_type {
u_int16_t atu_vid;
u_int16_t atu_pid;
enum atu_radio_type atu_radio;
u_int16_t atu_quirk;
};
struct atu_softc;
struct atu_chain {
struct atu_softc *atu_sc;
usbd_xfer_handle atu_xfer;
char *atu_buf;
struct mbuf *atu_mbuf;
u_int8_t atu_idx;
u_int16_t atu_length;
int atu_in_xfer;
SLIST_ENTRY(atu_chain) atu_list;
};
struct atu_cdata {
struct atu_chain atu_tx_chain[ATU_TX_LIST_CNT];
struct atu_chain atu_rx_chain[ATU_RX_LIST_CNT];
SLIST_HEAD(atu_list_head, atu_chain) atu_rx_free;
struct atu_list_head atu_tx_free;
u_int8_t atu_tx_inuse;
u_int8_t atu_tx_last_idx;
};
#define MAX_SSID_LEN 32
#define ATU_AVG_TIME 20
struct atu_softc {
USBBASEDEVICE atu_dev;
struct ethercom sc_ec;
struct ieee80211com sc_ic;
int (*sc_newstate)(struct ieee80211com *,
enum ieee80211_state, int);
char sc_state;
#define ATU_S_DEAD 0
#define ATU_S_OK 1
#define ATU_S_UNCONFIG 2
char sc_cmd;
#define ATU_C_NONE 0
#define ATU_C_SCAN 1
#define ATU_C_JOIN 2
struct usb_task sc_task;
usbd_device_handle atu_udev;
usbd_interface_handle atu_iface;
struct ethercom atu_ec;
struct ifmedia atu_media;
int atu_ed[ATU_ENDPT_MAX];
usbd_pipe_handle atu_ep[ATU_ENDPT_MAX];
int atu_unit;
int atu_if_flags;
struct atu_cdata atu_cdata;
struct timeval atu_rx_notice;
u_int8_t atu_bssid[ETHER_ADDR_LEN];
enum atu_radio_type atu_radio;
u_int16_t atu_quirk;
u_int8_t atu_channel;
u_int16_t atu_desired_channel;
u_int8_t atu_mode;
#define NO_MODE_YET 0
#define AD_HOC_MODE 1
#define INFRASTRUCTURE_MODE 2
u_int8_t atu_radio_on;
u_int8_t atu_encrypt;
#define ATU_WEP_RX 0x01
#define ATU_WEP_TX 0x02
#define ATU_WEP_TXRX (ATU_WEP_RX | ATU_WEP_TX)
int atu_wepkey;
int atu_wepkeylen;
u_int8_t atu_wepkeys[4][13];
};
#define sc_if sc_ec.ec_if
/* Commands for uploading the firmware (standard DFU interface) */
#define DFU_DNLOAD UT_WRITE_CLASS_INTERFACE, 0x01
#define DFU_GETSTATUS UT_READ_CLASS_INTERFACE, 0x03
#define DFU_GETSTATE UT_READ_CLASS_INTERFACE, 0x05
#define DFU_REMAP UT_WRITE_VENDOR_INTERFACE, 0x0a
/* DFU states */
#define DFUState_AppIdle 0
#define DFUState_AppDetach 1
#define DFUState_DFUIdle 2
#define DFUState_DnLoadSync 3
#define DFUState_DnLoadBusy 4
#define DFUState_DnLoadIdle 5
#define DFUState_ManifestSync 6
#define DFUState_Manifest 7
#define DFUState_ManifestWait 8
#define DFUState_UploadIdle 9
#define DFUState_DFUError 10
#define DFU_MaxBlockSize 1024
/* AT76c503 operating modes */
#define MODE_NONE 0x00
#define MODE_NETCARD 0x01
#define MODE_CONFIG 0x02
#define MODE_DFU 0x03
#define MODE_NOFLASHNETCARD 0x04
/* AT76c503 commands */
#define CMD_SET_MIB 0x01
#define CMD_START_SCAN 0x03
#define CMD_JOIN 0x04
#define CMD_START_IBSS 0x05
#define CMD_RADIO 0x06
#define CMD_RADIO_ON 0x06
#define CMD_RADIO_OFF 0x07
#define CMD_STARTUP 0x0b
/* AT76c503 status messages - used in atu_wait_completion */
#define STATUS_IDLE 0x00
#define STATUS_COMPLETE 0x01
#define STATUS_UNKNOWN 0x02
#define STATUS_INVALID_PARAMETER 0x03
#define STATUS_FUNCTION_NOT_SUPPORTED 0x04
#define STATUS_TIME_OUT 0x07
#define STATUS_IN_PROGRESS 0x08
#define STATUS_HOST_FAILURE 0xff
#define STATUS_SCAN_FAILED 0xf0
/* AT76c503 command header */
struct atu_cmd {
uByte Cmd;
uByte Reserved;
uWord Size;
} UPACKED;
/* CMD_SET_MIB command (0x01) */
struct atu_cmd_set_mib {
/* AT76c503 command header */
uByte AtCmd;
uByte AtReserved;
uWord AtSize;
/* MIB header */
uByte MIBType;
uByte MIBSize;
uByte MIBIndex;
uByte MIBReserved;
/* MIB data */
uByte data[72];
} UPACKED;
/* CMD_STARTUP command (0x0b) */
struct atu_cmd_card_config {
uByte Cmd;
uByte Reserved;
uWord Size;
uByte ExcludeUnencrypted;
uByte PromiscuousMode;
uByte ShortRetryLimit;
uByte EncryptionType;
uWord RTS_Threshold;
uWord FragThreshold; /* 256 .. 2346 */
uByte BasicRateSet[4];
uByte AutoRateFallback;
uByte Channel;
uByte PrivacyInvoked; /* wep */
uByte WEP_DefaultKeyID; /* 0 .. 3 */
uByte SSID[MAX_SSID_LEN];
uByte WEP_DefaultKey[4][13];
uByte SSID_Len;
uByte ShortPreamble;
uWord BeaconPeriod;
} UPACKED;
/* CMD_SCAN command (0x03) */
struct atu_cmd_do_scan {
uByte Cmd;
uByte Reserved;
uWord Size;
uByte BSSID[ETHER_ADDR_LEN];
uByte SSID[MAX_SSID_LEN];
uByte ScanType;
uByte Channel;
uWord ProbeDelay;
uWord MinChannelTime;
uWord MaxChannelTime;
uByte SSID_Len;
uByte InternationalScan;
} UPACKED;
#define ATU_SCAN_ACTIVE 0x00
#define ATU_SCAN_PASSIVE 0x01
/* CMD_JOIN command (0x04) */
struct atu_cmd_join {
uByte Cmd;
uByte Reserved;
uWord Size;
uByte bssid[ETHER_ADDR_LEN];
uByte essid[32];
uByte bss_type;
uByte channel;
uWord timeout;
uByte essid_size;
uByte reserved;
} UPACKED;
/* CMD_START_IBSS (0x05) */
struct atu_cmd_start_ibss {
uByte Cmd;
uByte Reserved;
uWord Size;
uByte BSSID[ETHER_ADDR_LEN];
uByte SSID[32];
uByte BSSType;
uByte Channel;
uByte SSIDSize;
uByte Res[3];
} UPACKED;
/*
* The At76c503 adapters come with different types of radios on them.
* At this moment the driver supports adapters with RFMD and Intersil radios.
*/
/* The config structure of an RFMD radio */
struct atu_rfmd_conf {
u_int8_t CR20[14];
u_int8_t CR21[14];
u_int8_t BB_CR[14];
u_int8_t PidVid[4];
u_int8_t MACAddr[ETHER_ADDR_LEN];
u_int8_t RegulatoryDomain;
u_int8_t LowPowerValues[14];
u_int8_t NormalPowerValues[14];
u_int8_t Reserved[3];
/* then we have 84 bytes, somehow Windows reads 95?? */
u_int8_t Rest[11];
} UPACKED;
/* The config structure of an Intersil radio */
struct atu_intersil_conf {
u_int8_t MACAddr[ETHER_ADDR_LEN];
/* From the HFA3861B manual : */
/* Manual TX power control (7bit : -64 to 63) */
u_int8_t CR31[14];
/* TX power measurement */
u_int8_t CR58[14];
u_int8_t PidVid[4];
u_int8_t RegulatoryDomain;
u_int8_t Reserved[1];
} UPACKED;
/* Firmware information request */
struct atu_fw {
u_int8_t major;
u_int8_t minor;
u_int8_t patch;
u_int8_t build;
} UPACKED;
/*
* The header the AT76c503 puts in front of RX packets (for both managment &
* data)
*/
struct atu_rx_hdr {
uWord length;
uByte rx_rate;
uByte newbss;
uByte fragmentation;
uByte rssi;
uByte link_quality;
uByte noise_level;
uDWord rx_time;
} UPACKED;
#define ATU_RX_HDRLEN sizeof(struct atu_rx_hdr)
/*
* The header we have to put in front of a TX packet before sending it to the
* AT76c503
*/
struct atu_tx_hdr {
uWord length;
uByte tx_rate;
uByte padding;
uByte reserved[4];
} UPACKED;
#define ATU_TX_HDRLEN sizeof(struct atu_tx_hdr)
#define NR(x) (void *)((long)x)
/*
* The linux driver uses seperate routines for every mib request they do
* (eg. set_radio / set_preamble / set_frag / etc etc )
* We just define a list of types, sizes and offsets and use those
*/
/* Name Type Size Index */
#define MIB_LOCAL 0x01
#define MIB_LOCAL__BEACON_ENABLE MIB_LOCAL, 1, 2
#define MIB_LOCAL__AUTO_RATE_FALLBACK MIB_LOCAL, 1, 3
#define MIB_LOCAL__SSID_SIZE MIB_LOCAL, 1, 5
#define MIB_LOCAL__PREAMBLE MIB_LOCAL, 1, 9
#define MIB_MAC_ADDR 0x02
#define MIB_MAC_ADDR__ADDR MIB_MAC_ADDR, 6, 0
#define MIB_MAC 0x03
#define MIB_MAC__FRAG MIB_MAC, 2, 8
#define MIB_MAC__RTS MIB_MAC, 2, 10
#define MIB_MAC__DESIRED_SSID MIB_MAC, 32, 28
#define MIB_MAC_MGMT 0x05
#define MIB_MAC_MGMT__BEACON_PERIOD MIB_MAC_MGMT, 2, 0
#define MIB_MAC_MGMT__CURRENT_BSSID MIB_MAC_MGMT, 6, 14
#define MIB_MAC_MGMT__CURRENT_ESSID MIB_MAC_MGMT, 32, 20
#define MIB_MAC_MGMT__POWER_MODE MIB_MAC_MGMT, 1, 53
#define MIB_MAC_MGMT__IBSS_CHANGE MIB_MAC_MGMT, 1, 54
#define MIB_MAC_WEP 0x06
#define MIB_MAC_WEP__PRIVACY_INVOKED MIB_MAC_WEP, 1, 0
#define MIB_MAC_WEP__KEY_ID MIB_MAC_WEP, 1, 1
#define MIB_MAC_WEP__ICV_ERROR_COUNT MIB_MAC_WEP, 4, 4
#define MIB_MAC_WEP__EXCLUDED_COUNT MIB_MAC_WEP, 4, 8
#define MIB_MAC_WEP__KEYS(nr) MIB_MAC_WEP, 13, 12+(nr)*13
#define MIB_MAC_WEP__ENCR_LEVEL MIB_MAC_WEP, 1, 64
#define MIB_PHY 0x07
#define MIB_PHY__CHANNEL MIB_PHY, 1, 20
#define MIB_PHY__REG_DOMAIN MIB_PHY, 1, 23
#define MIB_FW_VERSION 0x08
#define MIB_DOMAIN 0x09
#define MIB_DOMAIN__POWER_LEVELS MIB_DOMAIN, 14, 0
#define MIB_DOMAIN__CHANNELS MIB_DOMAIN, 14, 14
#define ATU_WEP_OFF 0
#define ATU_WEP_40BITS 1
#define ATU_WEP_104BITS 2
#define POWER_MODE_ACTIVE 1
#define POWER_MODE_SAVE 2
#define POWER_MODE_SMART 3
#define PREAMBLE_SHORT 1
#define PREAMBLE_LONG 0
![[BACK]](/icons/back.gif){kind=icon}
Return to if_atureg.h CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [cvs.NetBSD.org] / src / sys / dev / usb